7 years agocheckpatch: handle string concatenation in simple #defines
Andy Whitcroft [Fri, 23 Mar 2012 22:02:18 +0000]
checkpatch: handle string concatenation in simple #defines

Adjacent strings indicate concatentation, therefore look at identifiers
directly adjacent to literal strings as strings too.  This allows us to
better detect the form below and accept it as a simple constant:

    #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocheckpatch: allow simple character constants in #defines
Andy Whitcroft [Fri, 23 Mar 2012 22:02:17 +0000]
checkpatch: allow simple character constants in #defines

Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocheckpatch: catch [ ... ] usage when not at the beginning of definition
Andy Whitcroft [Fri, 23 Mar 2012 22:02:17 +0000]
checkpatch: catch [ ... ] usage when not at the beginning of definition

Handle the [ A ... B ] form deeper into a definition, for example:

    static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
    {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
    {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
    };

Reported-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocheckpatch.pl: be silent when -q and --ignore is given
Artem Bityutskiy [Fri, 23 Mar 2012 22:02:17 +0000]
checkpatch.pl: be silent when -q and --ignore is given

Fix checkpatch.pl when both -q and --ignore are given and prevents it from
printing a

NOTE: Ignored message types: blah

messages.

E.g., if I use -q --ignore PREFER_PACKED,PREFER_ALIGNED, i see:

NOTE: Ignored message types: PREFER_ALIGNED PREFER_PACKED

It makes no sense to print this when -q is given.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocheckpatch: add some --strict coding style checks
Joe Perches [Fri, 23 Mar 2012 22:02:16 +0000]
checkpatch: add some --strict coding style checks

Argument alignment across multiple lines should match the open
parenthesis.

Logical continuations should be at the end of the previous line, not the
start of a new line.

These are not required by CodingStyle so make the tests active only when
using --strict.

Improved by some examples from Bruce Allen.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "Bruce W. Allen" <bruce.w.allan@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoinclude/ and checkpatch: prefer __scanf to __attribute__((format(scanf,...)
Joe Perches [Fri, 23 Mar 2012 22:02:16 +0000]
include/ and checkpatch: prefer __scanf to __attribute__((format(scanf,...)

It's equivalent to __printf, so prefer __scanf.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoprio_tree: introduce prio_set_parent()
Xiao Guangrong [Fri, 23 Mar 2012 22:02:15 +0000]
prio_tree: introduce prio_set_parent()

Introduce prio_set_parent() to abstract the operation which is used to
attach the node to its parent.

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoprio_tree: simplify prio_tree_expand()
Xiao Guangrong [Fri, 23 Mar 2012 22:02:15 +0000]
prio_tree: simplify prio_tree_expand()

In current code, the deleted-node is recorded from first to last,
actually, we can directly attach these node on 'node' we will insert as
the left child, it can let the code more readable.

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoprio_tree: cleanup prio_tree_left()/prio_tree_right()
Xiao Guangrong [Fri, 23 Mar 2012 22:02:15 +0000]
prio_tree: cleanup prio_tree_left()/prio_tree_right()

Introduce iter_walk_down()/iter_walk_up() to remove the common code
between prio_tree_left() and prio_tree_right().

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoprio_tree: remove unnecessary code in prio_tree_replace
Xiao Guangrong [Fri, 23 Mar 2012 22:02:14 +0000]
prio_tree: remove unnecessary code in prio_tree_replace

Remove the code since 'node' has already been initialized in the begin of
the function

Signed-off-by: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agostring: memchr_inv() speed improvements
Akinobu Mita [Fri, 23 Mar 2012 22:02:14 +0000]
string: memchr_inv() speed improvements

- Generate a 64-bit pattern more efficiently

memchr_inv needs to generate a 64-bit pattern filled with a target
character.  The operation can be done by more efficient way.

- Don't call the slow check_bytes() if the memory area is 64-bit aligned

memchr_inv compares contiguous 64-bit words with the 64-bit pattern as
much as possible.  The outside of the region is checked by check_bytes()
that scans for each byte.  Unfortunately, the first 64-bit word is
unexpectedly scanned by check_bytes() even if the memory area is aligned
to a 64-bit boundary.

Both changes were originally suggested by Eric Dumazet.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoled-class: change back LEDS_CLASS to tristate instead of bool
Bryan Wu [Fri, 23 Mar 2012 22:02:14 +0000]
led-class: change back LEDS_CLASS to tristate instead of bool

After moving some core functions to led-core.c, led-class.c can be built
as module again.

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lm3530.c: move the code setting gen_config to one place
Axel Lin [Fri, 23 Mar 2012 22:02:13 +0000]
drivers/leds/leds-lm3530.c: move the code setting gen_config to one place

Improve the readability by moving the code setting gen_config to one
place.

[akpm@linux-foundation.org: fix some patch skew]
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Shreshtha Kumar Sahu <shreshthakumar.sahu@stericsson.com>
Cc: "Milo(Woogyom) Kim" <milo.kim@ti.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-pca9633.c: remove unused 'adapter' variable
Axel Lin [Fri, 23 Mar 2012 22:02:13 +0000]
drivers/leds/leds-pca9633.c: remove unused 'adapter' variable

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Peter Meerwald <p.meerwald@bct-electronic.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoleds-lm3530: replace pltfm with pdata
Kim, Milo [Fri, 23 Mar 2012 22:02:13 +0000]
leds-lm3530: replace pltfm with pdata

Use 'pdata' rather than 'pltfm' in lm3530_init_registers().

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoleds-lm3530: remove LM3530_ALS_ZONE_REG code
Kim, Milo [Fri, 23 Mar 2012 22:02:12 +0000]
leds-lm3530: remove LM3530_ALS_ZONE_REG code

LM3530_ALS_ZONE_REG is read-only register.
Writing this register is not necessary.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoleds-lm3530: support pwm input mode
Kim, Milo [Fri, 23 Mar 2012 22:02:12 +0000]
leds-lm3530: support pwm input mode

* add 'struct lm3530_pwm_data' in the platform data
  The pwm data is the platform specific functions which generate the pwm.
  The pwm data is only valid when brightness is pwm input mode.
  Functions should be implemented by the pwm driver.
  pwm_set_intensity() : set duty of pwm.
  pwm_get_intensity() : get current the brightness.

* brightness control by pwm
  If the control mode is pwm, then brightness is changed by the duty of
  pwm=.  So pwm platform function should be called in lm3530_brightness_set().

* do not update brightness register when pwm input mode
  In pwm input mode, brightness register is not used.
  If any value is updated in this register, then the led will be off.

* when input mode is changed, set duty of pwm to 0 if unnecessary.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoleds-lm3530: replace i2c_client with led_classdev
Kim, Milo [Fri, 23 Mar 2012 22:02:11 +0000]
leds-lm3530: replace i2c_client with led_classdev

To get members of lm3530_data, use 'struct led_classdev' rather than
'struct i2c_client'.

[akpm@linux-foundation.org: fix 80-column fixes more nicely]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoleds-lm3530: set the max_brightness to 127
Kim, Milo [Fri, 23 Mar 2012 22:02:11 +0000]
leds-lm3530: set the max_brightness to 127

Only 7 bits are used for updating the brightness.  (register address :
A0h) So the max_brightness property of lm3530 should be set to 127.

On initializing registers, maximum initial brightness is limited to
'max_brightness'.

Division-by-two is removed on updating the brightness.  This arithmetic is
not necessary because the range of brightness is 0 ~ 127= .

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-gpio.c: use linux/gpio.h rather than asm/gpio.h
Mark Brown [Fri, 23 Mar 2012 22:02:11 +0000]
drivers/leds/leds-gpio.c: use linux/gpio.h rather than asm/gpio.h

Direct usage of the asm include has long been deprecated by the
introduction of gpiolib.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds: add driver for PCA9633 I2C chip
Peter Meerwald [Fri, 23 Mar 2012 22:02:10 +0000]
drivers/leds: add driver for PCA9633 I2C chip

Driver for the PCA9633 I2C chip supporting four LEDs and 255 brightness
levels.

[akpm@linux-foundation.org: fix kcalloc() call]
[axel.lin@gmail.com: fix kcalloc parameters swapped]
Signed-off-by: Peter Meerwald <p.meerwald@bct-electronic.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lp5523.c: constify some data
Andrew Morton [Fri, 23 Mar 2012 22:02:10 +0000]
drivers/leds/leds-lp5523.c: constify some data

Saves ~50 bytes text and speeds things up.

Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lp5521.c: ret may be uninitialized
Srinidhi KASAGAR [Fri, 23 Mar 2012 22:02:09 +0000]
drivers/leds/leds-lp5521.c: ret may be uninitialized

Fix it by assigning the lp5521_read return value.

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Cc: Milo(Woogyom) Kim <milo.kim@ti.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lp5521.c: redefinition of register bits
Kim, Milo [Fri, 23 Mar 2012 22:02:09 +0000]
drivers/leds/leds-lp5521.c: redefinition of register bits

For better readability, values of LP5521_REG_ENABLE register were
redefined= .  Additional definitions: LP5521_ENABLE_DEFAULT and
LP5521_ENABLE_RUN_PROGRAM= .

Use definition rather than hard code value.
: 0x3F -> 'LP5521_CMD_DIRECT'

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lp5521.c: support led pattern data
Kim, Milo [Fri, 23 Mar 2012 22:02:09 +0000]
drivers/leds/leds-lp5521.c: support led pattern data

The lp5521 has autonomous operation mode without external control.
Using lp5521_platform_data, various led patterns can be configurable.
For supporting this feature, new functions and device attribute are
added.

Structure of lp5521_led_pattern: 3 channels are supported - red, green
and blue.  Pattern(s) of each channel and numbers of pattern(s) are
defined in the pla= tform data.  Pattern data are hexa codes which
include pattern commands such like set pwm, wait, ramp up/down, branch
and so on.

Pattern mode functions:
 * lp5521_clear_program_memory
Before running new led pattern, program memory should be cleared.
 * lp5521_write_program_memory
Pattern data updated in the program memory via the i2c.
 * lp5521_get_pattern
Get pattern from predefined in the platform data.
 * lp5521_run_led_pattern
Stop current pattern or run new pattern.
Transition time is required between different operation mode.

Device attribute - 'led_pattern': To load specific led pattern, new device
attribute is added.

When the lp5521 driver is unloaded, stop current led pattern mode.

Documentation updated : description about how to define the led patterns
and example.

[akpm@linux-foundation.org: checkpatch fixes]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lp5521.c: add 'update_config' in the lp5521_platform_data
Kim, Milo [Fri, 23 Mar 2012 22:02:08 +0000]
drivers/leds/leds-lp5521.c: add 'update_config' in the lp5521_platform_data

The value of CONFIG register(Addr 08h) is configurable.  For supporting
this feature, update_config is added in the platform data.  If
'update_config' is not defined, the default value is 'LP5521_PWRSAVE_EN |
LP5521_CP_MODE_AUTO | LP5521_R_TO_BATT'.

To define CONFIG register in the platform data, the bit definitions were
mo= ved to the header file.

Documentation updated : description about 'update_config' and example.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lp5521.c: add 'name' in the lp5521_led_config
Kim, Milo [Fri, 23 Mar 2012 22:02:08 +0000]
drivers/leds/leds-lp5521.c: add 'name' in the lp5521_led_config

The name of each led channel can be configurable.  For the compatibility,
the name is set to default value(xx:channelN) when 'name' is not defined.

Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Arun MURTHY <arun.murthy@stericsson.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-tca6507.c: remove obsolete cleanup for clientdata
Wolfram Sang [Fri, 23 Mar 2012 22:02:07 +0000]
drivers/leds/leds-tca6507.c: remove obsolete cleanup for clientdata

A few new i2c-drivers came into the kernel which clear the
clientdata-pointer on exit or error.  This is obsolete meanwhile, the
core will do it.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: NeilBrown <neilb@suse.de>
Cc: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-tca6507.c: cleanup error handling in tca6507_probe()
Dan Carpenter [Fri, 23 Mar 2012 22:02:07 +0000]
drivers/leds/leds-tca6507.c: cleanup error handling in tca6507_probe()

Just a small tidy-up.

1) There is a NULL dereference if the tca allocation fails.
2) The call to cancel_work_sync() isn't needed because we haven't
   scheduled any work.
3) The call to i2c_set_clientdata() isn't needed because the core
   handles that automatically if probe() fails.
4) I added some curly braces for style reasons.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Acked-by: NeilBrown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/leds/leds-lp5521.c: fix typo
Masanari Iida [Fri, 23 Mar 2012 22:02:06 +0000]
drivers/leds/leds-lp5521.c: fix typo

"reseting" -> "resetting"

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agox86: use for_each_clear_bit_from()
Akinobu Mita [Fri, 23 Mar 2012 22:02:06 +0000]
x86: use for_each_clear_bit_from()

Use for_each_clear_bit() to iterate over all the cleared bit in a
memory region.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agouwb: use for_each_clear_bit()
Akinobu Mita [Fri, 23 Mar 2012 22:02:05 +0000]
uwb: use for_each_clear_bit()

Use for_each_clear_bit() to iterate over all the cleared bit in a
memory region.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Stefano Panella <stefano.panella@csr.com>
Cc: David Vrabel <david.vrabel@csr.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agos390/char: use for_each_clear_bit()
Akinobu Mita [Fri, 23 Mar 2012 22:02:05 +0000]
s390/char: use for_each_clear_bit()

Use for_each_clear_bit() to iterate over all the cleared bit in a
memory region.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agomtd: use for_each_clear_bit()
Akinobu Mita [Fri, 23 Mar 2012 22:02:05 +0000]
mtd: use for_each_clear_bit()

Use for_each_clear_bit() to iterate over all the cleared bit in a
memory region.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobitops: introduce for_each_clear_bit()
Akinobu Mita [Fri, 23 Mar 2012 22:02:04 +0000]
bitops: introduce for_each_clear_bit()

Introduce for_each_clear_bit() and for_each_clear_bit_from().  They are
similar to for_each_set_bit() and list_for_each_set_bit_from(), but they
iterate over all the cleared bits in a memory region.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Stefano Panella <stefano.panella@csr.com>
Cc: David Vrabel <david.vrabel@csr.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobitops: remove for_each_set_bit_cont()
Akinobu Mita [Fri, 23 Mar 2012 22:02:04 +0000]
bitops: remove for_each_set_bit_cont()

Remove for_each_set_bit_cont() after confirming that no one uses
for_each_set_bit_cont() anymore.

[sfr@canb.auug.org.au: regmap: cope with bitops API change]
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobitops: rename for_each_set_bit_cont() in favor of analogous list.h function
Akinobu Mita [Fri, 23 Mar 2012 22:02:03 +0000]
bitops: rename for_each_set_bit_cont() in favor of analogous list.h function

This renames for_each_set_bit_cont() to for_each_set_bit_from() because
it is analogous to list_for_each_entry_from() in list.h rather than
list_for_each_entry_continue().

This doesn't remove for_each_set_bit_cont() for now.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobacklight: fix ot200_bl build
Randy Dunlap [Fri, 23 Mar 2012 22:02:03 +0000]
backlight: fix ot200_bl build

Fix build error when GPIO_CS5535 is not enabled:

  drivers/built-in.o: In function `ot200_backlight_probe':
  ot200_bl.c:(.text+0x205bf): undefined reference to `cs5535_gpio_set'
  ot200_bl.c:(.text+0x205d1): undefined reference to `cs5535_gpio_set'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobacklight: convert platform_lcd to dev_pm_ops
Jingoo Han [Fri, 23 Mar 2012 22:02:02 +0000]
backlight: convert platform_lcd to dev_pm_ops

Instead of using legacy suspend/resume methods, using newer dev_pm_ops
structure allows better control over power management.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobacklight: add support for Pandora backlight
Grazvydas Ignotas [Fri, 23 Mar 2012 22:02:02 +0000]
backlight: add support for Pandora backlight

Add support for pandora (openpandora.org) backlight.

It might look like all this could be done using pwm_bl.c instead, but
there is a need of special programming sequence when turning on the LED
driver chip or else it will misbehave.  Doing this using pwm_bl.c would
require to use some register programming and pwm functions from platform
code, and ARM maintainers are allergic to driver-like code in /arch/arm
nowadays.  The PMIC PWM driver is currently missing too, so pwm_bl.c
can't be used anyway.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobacklight: add driver for Bachmann's ot200
Christian Gmeiner [Fri, 23 Mar 2012 22:02:02 +0000]
backlight: add driver for Bachmann's ot200

Add backlight driver for Bachmann's ot200 visualisation device.  The
driver uses MFGPT 7 of CS5535 silicon to regulate the backlight.

[akpm@linux-foundation.org: remove redundant test of `brightness']
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Andres Salomon <dilinger@queued.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobacklight: new backlight driver for LP855x devices
Kim, Milo [Fri, 23 Mar 2012 22:02:01 +0000]
backlight: new backlight driver for LP855x devices

THis driver supports TI LP8550/LP8551/LP8552/LP8553/LP8556 backlight
devices.

The brightness can be controlled by the I2C or PWM input.  The lp855x
driver provides both modes.  For the PWM control, pwm-specific functions
can be defined in the platform data.  And some information can be read
via the sysfs(lp855x device attributes).

For details, please refer to Documentation/backlight/lp855x-driver.txt.

[axel.lin@gmail.com: add missing mutex_unlock in lp855x_read_byte() error path]
[axel.lin@gmail.com: check platform data in lp855x_probe()]
[axel.lin@gmail.com: small cleanups]
[dan.carpenter@oracle.com: silence a compiler warning]
[axel.lin@gmail.com: use id->driver_data to differentiate lp855x chips]
[akpm@linux-foundation.org: simplify boolean return expression]
Signed-off-by: Milo(Woogyom) Kim <milo.kim@ti.com>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/video/backlight/adp5520_bl.c: use devm_ functions
Julia Lawall [Fri, 23 Mar 2012 22:02:01 +0000]
drivers/video/backlight/adp5520_bl.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/video/backlight: use devm_ functions
Julia Lawall [Fri, 23 Mar 2012 22:02:00 +0000]
drivers/video/backlight: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/video/backlight/wm831x_bl.c: use devm_ functions
Julia Lawall [Fri, 23 Mar 2012 22:02:00 +0000]
drivers/video/backlight/wm831x_bl.c: use devm_ functions

The various devm_ functions allocate memory that is released when a driver
detaches.  This patch uses these functions for data that is allocated in
the probe function of a platform device and is only freed in the remove
function.

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobacklight: convert backlight spi drivers to module_spi_driver
Axel Lin [Fri, 23 Mar 2012 22:01:59 +0000]
backlight: convert backlight spi drivers to module_spi_driver

Factor out some boilerplate code for spi driver registration into
module_spi_driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Acked-by: Alberto Panizzo <alberto@amarulasolutions.com>
Cc: Donghwa Lee <dh09.lee@samsung.com>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: InKi Dae <inki.dae@samsung.com>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobacklight: convert backlight i2c drivers to module_i2c_driver
Axel Lin [Fri, 23 Mar 2012 22:01:59 +0000]
backlight: convert backlight i2c drivers to module_i2c_driver

Factor out some boilerplate code for i2c driver registration into
module_i2c_driver.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Michael Hennerich <hennerich@blackfin.uclinux.org>
Cc: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: update maintainership of LTP
Wanlong Gao [Fri, 23 Mar 2012 22:01:58 +0000]
MAINTAINERS: update maintainership of LTP

The maintainership of LTP is out of date, so update it.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Caspar Zhang <caspar@casparzhang.com>
Reviewed-by: Rishikesh K Rajak <rishikesh.rajak@hp.com>
Acked-by: Subrata Modak <tosubrata@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: add "S: Maintained" to clkdev and clk sections
Joe Perches [Fri, 23 Mar 2012 22:01:58 +0000]
MAINTAINERS: add "S: Maintained" to clkdev and clk sections

Russell King seems to be maintaining these.  Might as well mark them with
the appropriate S: entry

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: add status to ALPHA architecture
Joe Perches [Fri, 23 Mar 2012 22:01:57 +0000]
MAINTAINERS: add status to ALPHA architecture

Add missing S: status line to ALPHA.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: update git urls for 2.6 deletions
Joe Perches [Fri, 23 Mar 2012 22:01:57 +0000]
MAINTAINERS: update git urls for 2.6 deletions

Update the various git urls for name changes from 2.6.

Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: update MCA section
Joe Perches [Fri, 23 Mar 2012 22:01:57 +0000]
MAINTAINERS: update MCA section

The MCA section included a file referring to Machine Check rather than
Microchannel.

Rename the section to spell out Microchannel and drop the bad file
reference.

Reported-by: Greg Pearson <greg.pearson@hp.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoget_maintainer.pl: add support for moderated lists
Richard Weinberger [Fri, 23 Mar 2012 22:01:56 +0000]
get_maintainer.pl: add support for moderated lists

Currently get_maintainer.pl reports moderated lists as open, which is just
wrong.

Signed-off-by: Richard Weinberger <richard@nod.at>
Acked-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoget_maintainer: use a default "unknown" S: status/role
Joe Perches [Fri, 23 Mar 2012 22:01:56 +0000]
get_maintainer: use a default "unknown" S: status/role

When an "S:" status line is unavailable, use a default "unknown" role.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agokernel/watchdog.c: add comment to watchdog() exit path
Andrew Morton [Fri, 23 Mar 2012 22:01:56 +0000]
kernel/watchdog.c: add comment to watchdog() exit path

Revelation from Peter.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@tglx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agokernel/watchdog.c: convert to pr_foo()
Andrew Morton [Fri, 23 Mar 2012 22:01:55 +0000]
kernel/watchdog.c: convert to pr_foo()

It fixes some 80-col wordwrappings and adds some consistency.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agowatchdog: make sure the watchdog thread gets CPU on loaded system
Michal Hocko [Fri, 23 Mar 2012 22:01:55 +0000]
watchdog: make sure the watchdog thread gets CPU on loaded system

If the system is loaded while hotplugging a CPU we might end up with a
bogus hardlockup detection.  This has been seen during LTP pounder test
executed in parallel with hotplug test.

The main problem is that enable_watchdog (called when CPU is brought up)
registers perf event which periodically checks per-cpu counter
(hrtimer_interrupts), updated from a hrtimer callback, but the hrtimer
is fired from the kernel thread.

This means that while we already do check for the hard lockup the kernel
thread might be sitting on the runqueue with zillions of tasks so there
is nobody to update the value we rely on and so we KABOOM.

Let's fix this by boosting the watchdog thread priority before we wake
it up rather than when it's already running.  This still doesn't handle
a case where we have the same amount of high prio FIFO tasks but that
doesn't seem to be common.  The current implementation doesn't handle
that case anyway so this is not worse at least.

Unfortunately, we cannot start perf counter from the watchdog thread
because we could miss a real lock up and also we cannot start the
hrtimer watchdog_enable because we there is no way (at least I don't
know any) to start a hrtimer from a different CPU.

[dzickus@redhat.com: fix compile issue with param]
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agokernel/exit.c: if init dies, log a signal which killed it, if any
Denys Vlasenko [Fri, 23 Mar 2012 22:01:54 +0000]
kernel/exit.c: if init dies, log a signal which killed it, if any

I just received another user's pleas for help when their init
mysteriously died.  I again explained that they need to check whether it
died because of bad instruction, a segv, or something else.  Which was
an annoying detour into writing a trivial C program to spawn his init
and print its exit code:

  http://lists.busybox.net/pipermail/busybox/2012-January/077172.html

I hear you saying "just test it under /bin/sh".  Well, the crashing init
_was_ /bin/sh.

Which prompted me to make kernel do this first step automatically.  We can
print exit code, which makes it possible to see that death was from e.g.
SIGILL without writing test programs.

[akpm@linux-foundation.org: add 0x to hex number output]
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoprctl: add PR_{SET,GET}_CHILD_SUBREAPER to allow simple process supervision
Lennart Poettering [Fri, 23 Mar 2012 22:01:54 +0000]
prctl: add PR_{SET,GET}_CHILD_SUBREAPER to allow simple process supervision

Userspace service managers/supervisors need to track their started
services.  Many services daemonize by double-forking and get implicitly
re-parented to PID 1.  The service manager will no longer be able to
receive the SIGCHLD signals for them, and is no longer in charge of
reaping the children with wait().  All information about the children is
lost at the moment PID 1 cleans up the re-parented processes.

With this prctl, a service manager process can mark itself as a sort of
'sub-init', able to stay as the parent for all orphaned processes
created by the started services.  All SIGCHLD signals will be delivered
to the service manager.

Receiving SIGCHLD and doing wait() is in cases of a service-manager much
preferred over any possible asynchronous notification about specific
PIDs, because the service manager has full access to the child process
data in /proc and the PID can not be re-used until the wait(), the
service-manager itself is in charge of, has happened.

As a side effect, the relevant parent PID information does not get lost
by a double-fork, which results in a more elaborate process tree and
'ps' output:

before:
  # ps afx
  253 ?        Ss     0:00 /bin/dbus-daemon --system --nofork
  294 ?        Sl     0:00 /usr/libexec/polkit-1/polkitd
  328 ?        S      0:00 /usr/sbin/modem-manager
  608 ?        Sl     0:00 /usr/libexec/colord
  658 ?        Sl     0:00 /usr/libexec/upowerd
  819 ?        Sl     0:00 /usr/libexec/imsettings-daemon
  916 ?        Sl     0:00 /usr/libexec/udisks-daemon
  917 ?        S      0:00  \_ udisks-daemon: not polling any devices

after:
  # ps afx
  294 ?        Ss     0:00 /bin/dbus-daemon --system --nofork
  426 ?        Sl     0:00  \_ /usr/libexec/polkit-1/polkitd
  449 ?        S      0:00  \_ /usr/sbin/modem-manager
  635 ?        Sl     0:00  \_ /usr/libexec/colord
  705 ?        Sl     0:00  \_ /usr/libexec/upowerd
  959 ?        Sl     0:00  \_ /usr/libexec/udisks-daemon
  960 ?        S      0:00  |   \_ udisks-daemon: not polling any devices
  977 ?        Sl     0:00  \_ /usr/libexec/packagekitd

This prctl is orthogonal to PID namespaces.  PID namespaces are isolated
from each other, while a service management process usually requires the
services to live in the same namespace, to be able to talk to each
other.

Users of this will be the systemd per-user instance, which provides
init-like functionality for the user's login session and D-Bus, which
activates bus services on-demand.  Both need init-like capabilities to
be able to properly keep track of the services they start.

Many thanks to Oleg for several rounds of review and insights.

[akpm@linux-foundation.org: fix comment layout and spelling]
[akpm@linux-foundation.org: add lengthy code comment from Oleg]
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Lennart Poettering <lennart@poettering.net>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrivers/staging/telephony/ixj.c: fix warning about sequence points
Uwe Kleine-König [Fri, 23 Mar 2012 22:01:53 +0000]
drivers/staging/telephony/ixj.c: fix warning about sequence points

In the statement

j->caplist[j->caps].handle = j->caps++;

there is no sequence point between the usage of j->caps on the LHS of
the assignment and the incrementation on its RHS.  So it's not defined
in Standard C if j->caps is already incremented when used on the LHS
even though the postfix ++ operator is used.  To properly fix that the
incrementation has to be done in a separate expression.

This fixes:
drivers/telephony/ixj.c: In function `add_caps':
drivers/telephony/ixj.c:5930:38: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:5950:38: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:5954:38: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:5965:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:5976:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:5988:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:5998:38: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6003:38: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6008:38: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6013:38: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6019:38: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6026:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6031:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6036:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6041:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6049:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6057:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6065:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]
drivers/telephony/ixj.c:6071:39: warning: operation on `j->caps' may be undefined [-Wsequence-point]

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agofs/notify/notification.c: make subsys_initcall function static
H Hartley Sweeten [Fri, 23 Mar 2012 22:01:53 +0000]
fs/notify/notification.c: make subsys_initcall function static

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoRemove remaining bits of io_remap_page_range()
Javi Merino [Fri, 23 Mar 2012 22:01:52 +0000]
Remove remaining bits of io_remap_page_range()

Commit 33bf56106d9b ("feature removal of io_remap_page_range()") removed
io_remap_page_range(), but it is still included in some arch header
files.  It has no in-tree users.

Signed-off-by: Javi Merino <javi.merino@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Aurelien Jacquiot <a-jacquiot@ti.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoconsolidate WARN_...ONCE() static variables
Jan Beulich [Fri, 23 Mar 2012 22:01:52 +0000]
consolidate WARN_...ONCE() static variables

Due to the alignment of following variables, these typically consume
more than just the single byte that 'bool' requires, and as there are a
few hundred instances, the cache pollution (not so much the waste of
memory) sums up.  Put these variables into their own section, outside of
any half way frequently used memory range.

Do the same also to the __warned variable of rcu_lockdep_assert().
(Don't, however, include the ones used by printk_once() and alike, as
they can potentially be hot.)

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoheaders: include linux/types.h where appropriate
Bobby Powers [Fri, 23 Mar 2012 22:01:51 +0000]
headers: include linux/types.h where appropriate

This addresses some header check warnings.  DRM headers which include
"drm.h" have been excluded, as they indirectly include types.h.

Signed-off-by: Bobby Powers <bobbypowers@gmail.com>
Cc: Chris Ball <cjb@laptop.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agonmi watchdog: do not use cpp symbol in Kconfig
Cong Wang [Fri, 23 Mar 2012 22:01:51 +0000]
nmi watchdog: do not use cpp symbol in Kconfig

ARCH_HAS_NMI_WATCHDOG is a macro defined by arch, but config
HARDLOCKUP_DETECTOR depends on it.  This is wrong, ARCH_HAS_NMI_WATCHDOG
has to be a Kconfig config, and arch's need it should select it
explicitly.

Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Don Zickus <dzickus@redhat.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Cc: David Howells <dhowells@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agomagic.h: move some FS magic numbers into magic.h
Muthu Kumar [Fri, 23 Mar 2012 22:01:50 +0000]
magic.h: move some FS magic numbers into magic.h

- Move open-coded filesystem magic numbers into magic.h

- Rearrange magic.h so that the filesystem-related constants are grouped
  together.

Signed-off-by: Muthukumar R <muthur@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoum: use set_current_blocked() and block_sigmask()
Matt Fleming [Fri, 23 Mar 2012 22:01:50 +0000]
um: use set_current_blocked() and block_sigmask()

As described in commit e6fa16ab9c1e ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block is
pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures.  In the past some architectures got this code
wrong, so using this helper function should stop that from happening
again.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoum: don't restore current->blocked on error
Matt Fleming [Fri, 23 Mar 2012 22:01:49 +0000]
um: don't restore current->blocked on error

If we fail to setup the signal stack frame then we don't need to restore
current->blocked because it is not modified by setup_signal_stack_*.

Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Richard Weinberger <richard@nod.at>
Tested-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agomm: hugetlb: cleanup duplicated code in unmapping vm range
Hillf Danton [Fri, 23 Mar 2012 22:01:48 +0000]
mm: hugetlb: cleanup duplicated code in unmapping vm range

Fix code duplication in __unmap_hugepage_range(), such as pte_page() and
huge_pte_none().

Signed-off-by: Hillf Danton <dhillf@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 23 Mar 2012 17:07:16 +0000]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:

 1) L2TP doesn't get autoloaded when you try to open an L2TP socket due
    to a missing module alias, fix from Benjamin LaHaise.

 2) Netlabel and RDS should propagate gfp flags given to them by
    callers, fixes from Dan Carpeneter.

 3) Recursive locking fix in usbnet wasn't bulletproof and can result in
    objects going away mid-flight due to races, fix from Ming Lei.

 4) Fix up some confusion about a bool module parameter in netfilter's
    iptable_filter and ip6table_filter, from Rusty Russell.

 5) If SKB recycling is used via napi_reuse_skb() we end up with
    different amounts of headroom reserved than we had at the original
    SKB allocation.  Fix from Eric Dumazet.

 6) Fix races in TG3 driver ring refilling, from Michael Chan.

 7) We have callbacks for IPSEC replay notifiers, but some call sites
    were not using the ops method and instead were calling one of the
    implementations directly.  Oops.  Fix from Steffen Klassert.

 8) Fix IP address validation properly in the bonding driver, the
    previous fix only works with netlink where the subnet mask and IP
    address are changed in one atomic operation.  When 'ifconfig' ioctls
    are used the IP address and the subnet mask are changed in two
    distinct operations.  Fix from Andy Gospodarek.

 9) Provide a sky2 module operation to work around power management
    issues with some BIOSes.  From Stephen Hemminger.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  usbnet: consider device busy at each recieved packet
  bonding: remove entries for master_ip and vlan_ip and query devices instead
  netfilter: remove forward module param confusion.
  usbnet: don't clear urb->dev in tx_complete
  usbnet: increase URB reference count before usb_unlink_urb
  xfrm: Access the replay notify functions via the registered callbacks
  xfrm: Remove unused xfrm_state from xfrm_state_check_space
  RDS: use gfp flags from caller in conn_alloc()
  netlabel: use GFP flags from caller instead of GFP_ATOMIC
  l2tp: enable automatic module loading for l2tp_ppp
  cnic: Fix parity error code conflict
  tg3: Fix RSS ring refill race condition
  sky2: override for PCI legacy power management
  net: fix napi_reuse_skb() skb reserve

7 years agoMerge tag 'for_linus-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwesse...
Linus Torvalds [Fri, 23 Mar 2012 16:29:44 +0000]
Merge tag 'for_linus-3.4-rc1' of git://git./linux/kernel/git/jwessel/kgdb

Pull KGDB/KDB updates from Jason Wessel:
 "Fixes:
   - Fix KDB keyboard repeat scan codes and leaked keyboard events
   - Fix kernel crash with kdb_printf() for users who compile new
     kdb_printf()'s in early code
   - Return all segment registers to gdb on x86_64

  Features:
   - KDB/KGDB hook the reboot notifier and end user can control if it
     stops, detaches or does nothing (updated docs as well)
   - Notify users who use CONFIG_DEBUG_RODATA to use hw breakpoints"

* tag 'for_linus-3.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/kgdb:
  kdb: Add message about CONFIG_DEBUG_RODATA on failure to install breakpoint
  kdb: Avoid using dbg_io_ops until it is initialized
  kgdb,debug_core: add the ability to control the reboot notifier
  KDB: Fix usability issues relating to the 'enter' key.
  kgdb,debug-core,gdbstub: Hook the reboot notifier for debugger detach
  kgdb: Respect that flush op is optional
  kgdb: x86: Return all segment registers also in 64-bit mode

7 years agoMerge tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux...
Linus Torvalds [Fri, 23 Mar 2012 16:28:45 +0000]
Merge tag 'ktest-v3.4' of git://git./linux/kernel/git/rostedt/linux-ktest

Pull ktest changes from Steven Rostedt.

* tag 'ktest-v3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Allow a test to override REBOOT_ON_SUCCESS
  ktest: Fix SWITCH_TO_GOOD to also reboot the machine
  ktest: Add SCP_TO_TARGET_INSTALL option
  ktest: Add warning when bugs are ignored
  ktest: Add INSTALL_MOD_STRIP=1 when installing modules

7 years agoMerge tag 'upstream-3.4-rc1' of git://git.infradead.org/linux-ubifs
Linus Torvalds [Fri, 23 Mar 2012 16:27:40 +0000]
Merge tag 'upstream-3.4-rc1' of git://git.infradead.org/linux-ubifs

Pull UBIFS changes from Artem Bityutskiy:
 - Improve error messages
 - Clean-up i_nlink management
 - Minor clean-ups

* tag 'upstream-3.4-rc1' of git://git.infradead.org/linux-ubifs:
  UBIFS: improve error messages
  UBIFS: kill CUR_MAX_KEY_LEN macro
  UBIFS: do not use inc_link when i_nlink is zero
  UBIFS: make the dbg_lock spinlock static
  UBIFS: increase dumps loglevel
  UBIFS: amend recovery debugging message

7 years agoMerge tag 'upstream-3.4-rc1' of git://git.infradead.org/linux-ubi
Linus Torvalds [Fri, 23 Mar 2012 16:25:31 +0000]
Merge tag 'upstream-3.4-rc1' of git://git.infradead.org/linux-ubi

Pull UBI changes from Artem Bityutskiy:
 - Reduce memory consumption
 - Fix picking unknown blocks
 - Fix error-path in 'ubi_scan()'
 - Minor clean-ups

* tag 'upstream-3.4-rc1' of git://git.infradead.org/linux-ubi:
  UBI: rename MOVE_CANCEL_BITFLIPS to MOVE_TARGET_BITFLIPS
  UBI: rename peb_buf1 to peb_buf
  UBI: reduce memory consumption
  UBI: fix eraseblock picking criteria
  UBI: fix documentation and improve readability
  UBI: fix error handling in ubi_scan()

7 years agoMerge tag 'pstore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl...
Linus Torvalds [Fri, 23 Mar 2012 16:24:07 +0000]
Merge tag 'pstore-for-linus' of git://git./linux/kernel/git/aegl/linux

Pull one pstore patch from Tony Luck

* tag 'pstore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  pstore: Introduce get_reason_str() to pstore

7 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Fri, 23 Mar 2012 16:19:22 +0000]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

Pull XFS updates from Ben Myers:
 "Scalability improvements for dquots, log grant code cleanups, plus
  bugfixes and cleanups large and small"

Fix up various trivial conflicts that were due to some of the earlier
patches already having been integrated into v3.3 as bugfixes, and then
there were development patches on top of those.  Easily merged by just
taking the newer version from the pulled branch.

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (45 commits)
  xfs: fallback to vmalloc for large buffers in xfs_getbmap
  xfs: fallback to vmalloc for large buffers in xfs_attrmulti_attr_get
  xfs: remove remaining scraps of struct xfs_iomap
  xfs: fix inode lookup race
  xfs: clean up minor sparse warnings
  xfs: remove the global xfs_Gqm structure
  xfs: remove the per-filesystem list of dquots
  xfs: use per-filesystem radix trees for dquot lookup
  xfs: per-filesystem dquot LRU lists
  xfs: use common code for quota statistics
  xfs: reimplement fdatasync support
  xfs: split in-core and on-disk inode log item fields
  xfs: make xfs_inode_item_size idempotent
  xfs: log timestamp updates
  xfs: log file size updates at I/O completion time
  xfs: log file size updates as part of unwritten extent conversion
  xfs: do not require an ioend for new EOF calculation
  xfs: use per-filesystem I/O completion workqueues
  quota: make Q_XQUOTASYNC a noop
  xfs: include reservations in quota reporting
  ...

7 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Fri, 23 Mar 2012 16:07:15 +0000]
Merge git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: clean up ordering in exit_cifs
  cifs: clean up call to cifs_dfs_release_automount_timer()
  CIFS: Delete echo_retries module parm
  CIFS: Prepare credits code for a slot reservation
  CIFS: Make wait_for_free_request killable
  CIFS: Introduce credit-based flow control
  CIFS: Simplify inFlight logic
  cifs: fix issue mounting of DFS ROOT when redirecting from one domain controller to the next
  CIFS: Respect negotiated MaxMpxCount
  CIFS: Fix a spurious error in cifs_push_posix_locks

7 years agoMerge tag 'nfs-for-3.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Linus Torvalds [Fri, 23 Mar 2012 15:53:47 +0000]
Merge tag 'nfs-for-3.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client updates for Linux 3.4 from Trond Myklebust:
 "New features include:
   - Add NFS client support for containers.

     This should enable most of the necessary functionality, including
     lockd support, and support for rpc.statd, NFSv4 idmapper and
     RPCSEC_GSS upcalls into the correct network namespace from which
     the mount system call was issued.

   - NFSv4 idmapper scalability improvements

     Base the idmapper cache on the keyring interface to allow
     concurrent access to idmapper entries.  Start the process of
     migrating users from the single-threaded daemon-based approach to
     the multi-threaded request-key based approach.

   - NFSv4.1 implementation id.

     Allows the NFSv4.1 client and server to mutually identify each
     other for logging and debugging purposes.

   - Support the 'vers=4.1' mount option for mounting NFSv4.1 instead of
     having to use the more counterintuitive 'vers=4,minorversion=1'.

   - SUNRPC tracepoints.

     Start the process of adding tracepoints in order to improve
     debugging of the RPC layer.

   - pNFS object layout support for autologin.

  Important bugfixes include:

   - Fix a bug in rpc_wake_up/rpc_wake_up_status that caused them to
     fail to wake up all tasks when applied to priority waitqueues.

   - Ensure that we handle read delegations correctly, when we try to
     truncate a file.

   - A number of fixes for NFSv4 state manager loops (mostly to do with
     delegation recovery)."

* tag 'nfs-for-3.4-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (224 commits)
  NFS: fix sb->s_id in nfs debug prints
  xprtrdma: Remove assumption that each segment is <= PAGE_SIZE
  xprtrdma: The transport should not bug-check when a dup reply is received
  pnfs-obj: autologin: Add support for protocol autologin
  NFS: Remove nfs4_setup_sequence from generic rename code
  NFS: Remove nfs4_setup_sequence from generic unlink code
  NFS: Remove nfs4_setup_sequence from generic read code
  NFS: Remove nfs4_setup_sequence from generic write code
  NFS: Fix more NFS debug related build warnings
  SUNRPC/LOCKD: Fix build warnings when CONFIG_SUNRPC_DEBUG is undefined
  nfs: non void functions must return a value
  SUNRPC: Kill compiler warning when RPC_DEBUG is unset
  SUNRPC/NFS: Add Kbuild dependencies for NFS_DEBUG/RPC_DEBUG
  NFS: Use cond_resched_lock() to reduce latencies in the commit scans
  NFSv4: It is not safe to dereference lsp->ls_state in release_lockowner
  NFS: ncommit count is being double decremented
  SUNRPC: We must not use list_for_each_entry_safe() in rpc_wake_up()
  Try using machine credentials for RENEW calls
  NFSv4.1: Fix a few issues in filelayout_commit_pagelist
  NFSv4.1: Clean ups and bugfixes for the pNFS read/writeback/commit code
  ...

7 years agomm: fix testorder interaction between two kswapd patches
Hugh Dickins [Fri, 23 Mar 2012 09:57:31 +0000]
mm: fix testorder interaction between two kswapd patches

Adjusting cc715d99e529 "mm: vmscan: forcibly scan highmem if there are
too many buffer_heads pinning highmem" for -stable reveals that it was
slightly wrong once on top of fe2c2a106663 "vmscan: reclaim at order 0
when compaction is enabled", which specifically adds testorder for the
zone_watermark_ok_safe() test.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge tag 'fbdev-updates-for-3.4' of git://github.com/schandinat/linux-2.6
Linus Torvalds [Fri, 23 Mar 2012 03:43:40 +0000]
Merge tag 'fbdev-updates-for-3.4' of git://github.com/schandinat/linux-2.6

Pull fbdev updates for 3.4 from Florian Tobias Schandinat:
 - drivers for Samsung Exynos MIPI DSI and display port
 - i740fb to support those old Intel chips
 - large updates to OMAP, viafb and sh_mobile_lcdcfb
 - some updates to s3c-fb and udlfb, few patches to others

Fix up conflicts in drivers/video/udlfb.c due to Key Sievers' fix making
it in twice.

* tag 'fbdev-updates-for-3.4' of git://github.com/schandinat/linux-2.6: (156 commits)
  Revert "video:uvesafb: Fix oops that uvesafb try to execute NX-protected page"
  OMAPDSS: register dss drivers in module init
  video: pxafb: add clk_prepare/clk_unprepare calls
  fbdev: bfin_adv7393fb: Drop needless include
  fbdev: sh_mipi_dsi: add extra phyctrl for sh_mipi_dsi_info
  fbdev: remove dependency of FB_SH_MOBILE_MERAM from FB_SH_MOBILE_LCDC
  Revert "MAINTAINERS: add entry for exynos mipi display drivers"
  fbdev: da8xx: add support for SP10Q010 display
  fbdev: da8xx:: fix reporting of the display timing info
  drivers/video/pvr2fb.c: ensure arguments to request_irq and free_irq are compatible
  OMAPDSS: APPLY: fix clearing shadow dirty flag with manual update
  fbdev: sh_mobile_meram: Implement system suspend/resume
  fbdev: sh_mobile_meram: Remove unneeded sanity checks
  fbdev: sh_mobile_meram: Don't perform update in register operation
  arm: mach-shmobile: Constify sh_mobile_meram_cfg structures
  fbdev: sh_mobile_lcdc: Don't store copy of platform data
  fbdev: sh_mobile_meram: Remove unused sh_mobile_meram_icb_cfg fields
  arm: mach-shmobile: Don't set MERAM ICB numbers in platform data
  fbdev: sh_mobile_meram: Allocate ICBs automatically
  fbdev: sh_mobile_meram: Use genalloc to manage MERAM allocation
  ...

7 years agoMerge tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Linus Torvalds [Fri, 23 Mar 2012 03:33:14 +0000]
Merge tag 'regmap-3.4' of git://git./linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "Things are really quieting down with the regmap API, while we're still
  seeing a trickle of new features coming in they're getting much
  smaller than they were.  It's also nice to have some features which
  support other subsystems building infrastructure on top of regmap.
  Highlights include:

  - Support for padding between the register and the value when
    interacting with the device, sometimes needed for fast interfaces.
  - Support for applying register updates to the device when restoring
    the register state.  This is intended to be used to apply updates
    supplied by manufacturers for tuning the performance of the device
    (many of which are to undocumented registers which aren't otherwise
    covered).
  - Support for multi-register operations on cached registers.
  - Support for syncing only part of the register cache.
  - Stubs and parameter query functions intended to make it easier for
    other subsystems to build infrastructure on top of the regmap API.

  plus a few driver updates making use of the new features which it was
  easier to merge via this tree."

* tag 'regmap-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: (41 commits)
  regmap: Fix future missing prototype of devres_alloc() and friends
  regmap: Rejig struct declarations for stubbed API
  regmap: Fix rbtree block base in sync
  regcache: Make sure we sync register 0 in an rbtree cache
  regmap: delete unused module.h from drivers/base/regmap files
  regmap: Add stub for regcache_sync_region()
  mfd: Improve performance of later WM1811 revisions
  regmap: Fix x86_64 breakage
  regmap: Allow drivers to sync only part of the register cache
  regmap: Supply ranges to the sync operations
  regmap: Add tracepoints for cache only and cache bypass
  regmap: Mark the cache as clean after a successful sync
  regmap: Remove default cache sync implementation
  regmap: Skip hardware defaults for LZO caches
  regmap: Expose the driver name in debugfs
  mfd: wm8400: Convert to devm_regmap_init_i2c()
  mfd: wm831x: Convert to devm_regmap_init()
  mfd: wm8994: Convert to devm_regmap_init()
  mfd/ASoC: Convert WM8994 driver to use regmap patches
  mfd: Add __devinit and __devexit annotations in wm8994
  ...

7 years agoMerge tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee139...
Linus Torvalds [Fri, 23 Mar 2012 03:31:15 +0000]
Merge tag 'firewire-updates' of git://git./linux/kernel/git/ieee1394/linux1394

Pull IEEE 1394 (FireWire) subsystem updates post v3.3 from Stefan Richter:

 - Some SBP-2 initiator fixes, side product from ongoing work on a target.

 - Reintroduction of an isochronous I/O feature of the older ieee1394 driver
   stack (flush buffer completions); it was evidently rarely used but not
   actually unused.  Matching libraw1394 code is already available.

 - Be sure to prefix all kernel log messages with device name or card name,
   and other logging related cleanups.

 - Misc other small cleanups, among them a small API change that affects
   sound/firewire/ too. Clemens Ladisch is aware of it.

* tag 'firewire-updates' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: (26 commits)
  firewire: allow explicit flushing of iso packet completions
  firewire: prevent dropping of completed iso packet header data
  firewire: ohci: factor out iso completion flushing code
  firewire: ohci: simplify iso header pointer arithmetic
  firewire: ohci: optimize control bit checks
  firewire: ohci: remove unused excess_bytes field
  firewire: ohci: copy_iso_headers(): make comment match the code
  firewire: cdev: fix IR multichannel event documentation
  firewire: ohci: fix too-early completion of IR multichannel buffers
  firewire: ohci: move runtime debug facility out of #ifdef
  firewire: tone down some diagnostic log messages
  firewire: sbp2: replace a GFP_ATOMIC allocation
  firewire: sbp2: Fix SCSI sense data mangling
  firewire: sbp2: Ignore SBP-2 targets on the local node
  firewire: sbp2: Take into account Unit_Unique_ID
  firewire: nosy: Use the macro DMA_BIT_MASK().
  firewire: core: convert AR-req handler lock from _irqsave to _bh
  firewire: core: fix race at address_handler unregistration
  firewire: core: remove obsolete comment
  firewire: core: prefix log messages with card name
  ...

7 years agoMerge tag 'pinctrl-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw...
Linus Torvalds [Fri, 23 Mar 2012 03:25:50 +0000]
Merge tag 'pinctrl-for-3.4' of git://git./linux/kernel/git/linusw/linux-pinctrl

Pull pinctrl updates for v3.4 from Linus Walleij (*):
 - Switches the PXA 168, 910 and MMP over to use pinctrl
 - Locking revamped
 - Massive refactorings...
 - Reform the driver API to use multiple states
 - Support pin config in the mapping tables
 - Pinctrl drivers for the nVidia Tegra series
 - Generic pin config support lib for simple pin controllers
 - Implement pin config for the U300

* tag 'pinctrl-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  ARM: u300: configure some pins as an example
  pinctrl: support pinconfig on the U300
  pinctrl/coh901: use generic pinconf enums and parameters
  pinctrl: introduce generic pin config
  pinctrl: fix error path in pinconf_map_to_setting()
  pinctrl: allow concurrent gpio and mux function ownership of pins
  pinctrl: forward-declare struct device
  pinctrl: split pincontrol states into its own header
  pinctrl: include machine header to core.h
  ARM: tegra: Select PINCTRL Kconfig variables
  pinctrl: add a driver for NVIDIA Tegra
  pinctrl: Show selected function and group in pinmux-pins debugfs
  pinctrl: enhance mapping table to support pin config operations
  pinctrl: API changes to support multiple states per device
  pinctrl: add usecount to pins for muxing
  pinctrl: refactor struct pinctrl handling in core.c vs pinmux.c
  pinctrl: fix and simplify locking
  pinctrl: fix the pin descriptor kerneldoc
  pinctrl: assume map table entries can't have a NULL name field
  pinctrl: introduce PINCTRL_STATE_DEFAULT, define hogs as that state
  ...

(*) What is it with all these Linuses these days? There's a Linus at
    google too.  Some day I will get myself my own broadsword, and run
    around screaming "There can be only one".

    I used to be _special_ dammit. Snif.

7 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
Linus Torvalds [Fri, 23 Mar 2012 03:22:30 +0000]
Merge tag 'for-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

Pull libata updates from Jeff Garzik:

 1) AHCI regression fix.  A recent "make driver conform to spec" change
    broke on deployed hardware.  Make new behavior optional, rather than
    default, turning it on only for specific embedded platforms that
    need this.

    Everybody else runs in the famous "non conformant but working" mode.

 2) pata_cmd64x, pata_legacy cleanups

 3) new Intel SATA PCI IDs

 4) misc minor vendor feature additions

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  pata_cmd64x: implement sff_irq_check() method
  pata_cmd64x: implement sff_irq_clear() method
  pata_cmd64x: use interrupt status from MRDMODE register
  pata_cmd64x: turn string of *if* statements into *switch*
  drivers/ata/pata_mpc52xx.c: clean up error handling code
  ahci_platform: add STRICT_AHCI platform type
  ahci: move AHCI_HFLAGS() macro to ahci.h
  ahci: add AHCI_HFLAG_DELAY_ENGINE host flag
  sata_fsl: add support for interrupt coalsecing feature
  ata/pata_arasan_cf: Add Hibernation support
  pata_legacy: correctly mask recovery field for HT6560B
  ata_piix: IDE-mode SATA patch for Intel Lynx Point DeviceIDs
  ahci: AHCI-mode SATA patch for Intel Lynx Point DeviceIDs

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Fri, 23 Mar 2012 03:20:18 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input subsystem updates from Dmitry Torokhov:
 "- we finally merged driver for USB version of Synaptics touchpads
    (I guess most commonly found in IBM/Lenovo keyboard/touchpad combo);

   - a bunch of new drivers for embedded platforms (Cypress
     touchscreens, DA9052 OnKey, MAX8997-haptic, Ilitek ILI210x
     touchscreens, TI touchscreen);

   - input core allows clients to specify desired clock source for
     timestamps on input events (EVIOCSCLOCKID ioctl);

   - input core allows querying state of all MT slots for given event
     code via EVIOCGMTSLOTS ioctl;

   - various driver fixes and improvements."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits)
  Input: ili210x - add support for Ilitek ILI210x based touchscreens
  Input: altera_ps2 - use of_match_ptr()
  Input: synaptics_usb - switch to module_usb_driver()
  Input: convert I2C drivers to use module_i2c_driver()
  Input: convert SPI drivers to use module_spi_driver()
  Input: omap4-keypad - move platform_data to <linux/platform_data>
  Input: kxtj9 - who_am_i check value and initial data rate fixes
  Input: add driver support for MAX8997-haptic
  Input: tegra-kbc - revise device tree support
  Input: of_keymap - add device tree bindings for simple key matrices
  Input: wacom - fix physical size calculation for 3rd-gen Bamboo
  Input: twl4030-vibra - really switch from #if to #ifdef
  Input: hp680_ts_input - ensure arguments to request_irq and free_irq are compatible
  Input: max8925_onkey - avoid accessing input device too early
  Input: max8925_onkey - allow to be used as a wakeup source
  Input: atmel-wm97xx - convert to dev_pm_ops
  Input: atmel-wm97xx - set driver owner
  Input: add cyttsp touchscreen maintainer entry
  Input: cyttsp - remove useless checks in cyttsp_probe()
  Input: usbtouchscreen - add support for Data Modul EasyTouch TP 72037
  ...

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Fri, 23 Mar 2012 03:19:30 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fixes from Herbert Xu:
 "This fixes a build problem where two crypto modules both try to export
  the same symbols (which shouldn't have been exported in the first
  place)."

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: twofish-x86_64-3way - module init/exit functions should be static
  crypto: camellia-x86_64 - module init/exit functions should be static

7 years agoMerge tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 23 Mar 2012 02:59:19 +0000]
Merge tag 'stable/for-linus-3.4-tag' of git://git./linux/kernel/git/konrad/xen

Pull xen updates from Konrad Rzeszutek Wilk:
 "which has three neat features:

   - PV multiconsole support, so that there can be hvc1, hvc2, etc; This
     can be used in HVM and in PV mode.

   - P-state and C-state power management driver that uploads said power
     management data to the hypervisor.  It also inhibits cpufreq
     scaling drivers to load so that only the hypervisor can make power
     management decisions - fixing a weird perf bug.

     There is one thing in the Kconfig that you won't like: "default y
     if (X86_ACPI_CPUFREQ = y || X86_POWERNOW_K8 = y)" (note, that it
     all depends on CONFIG_XEN which depends on CONFIG_PARAVIRT which by
     default is off).  I've a fix to convert that boolean expression
     into "default m" which I am going to post after the cpufreq git
     pull - as the two patches to make this work depend on a fix in Dave
     Jones's tree.

   - Function Level Reset (FLR) support in the Xen PCI backend.

  Fixes:

   - Kconfig dependencies for Xen PV keyboard and video
   - Compile warnings and constify fixes
   - Change over to use percpu_xxx instead of this_cpu_xxx"

Fix up trivial conflicts in drivers/tty/hvc/hvc_xen.c due to changes to
a removed commit.

* tag 'stable/for-linus-3.4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen kconfig: relax INPUT_XEN_KBDDEV_FRONTEND deps
  xen/acpi-processor: C and P-state driver that uploads said data to hypervisor.
  xen: constify all instances of "struct attribute_group"
  xen/xenbus: ignore console/0
  hvc_xen: introduce HVC_XEN_FRONTEND
  hvc_xen: implement multiconsole support
  hvc_xen: support PV on HVM consoles
  xenbus: don't free other end details too early
  xen/enlighten: Expose MWAIT and MWAIT_LEAF if hypervisor OKs it.
  xen/setup/pm/acpi: Remove the call to boot_option_idle_override.
  xenbus: address compiler warnings
  xen: use this_cpu_xxx replace percpu_xxx funcs
  xen/pciback: Support pci_reset_function, aka FLR or D3 support.
  pci: Introduce __pci_reset_function_locked to be used when holding device_lock.
  xen: Utilize the restore_msi_irqs hook.

7 years agousbnet: consider device busy at each recieved packet
Oliver Neukum [Sat, 3 Mar 2012 17:45:07 +0000]
usbnet: consider device busy at each recieved packet

usbnet should centrally handle busy reporting in the rx path
so subdrivers need not worry. This hurts use cases which do
rx only or predominantly.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge tag 'stable/for-linus-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 23 Mar 2012 02:52:47 +0000]
Merge tag 'stable/for-linus-3.4' of git://git./linux/kernel/git/konrad/mm

Pull cleancache changes from Konrad Rzeszutek Wilk:
 "This has some patches for the cleancache API that should have been
  submitted a _long_ time ago.  They are basically cleanups:

   - rename of flush to invalidate

   - moving reporting of statistics into debugfs

   - use __read_mostly as necessary.

  Oh, and also the MAINTAINERS file change.  The files (except the
  MAINTAINERS file) have been in #linux-next for months now.  The late
  addition of MAINTAINERS file is a brain-fart on my side - didn't
  realize I needed that just until I was typing this up - and I based
  that patch on v3.3 - so the tree is on top of v3.3."

* tag 'stable/for-linus-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm:
  MAINTAINERS: Adding cleancache API to the list.
  mm: cleancache: Use __read_mostly as appropiate.
  mm: cleancache: report statistics via debugfs instead of sysfs.
  mm: zcache/tmem/cleancache: s/flush/invalidate/
  mm: cleancache: s/flush/invalidate/

7 years agobonding: remove entries for master_ip and vlan_ip and query devices instead
Andy Gospodarek [Thu, 22 Mar 2012 16:14:29 +0000]
bonding: remove entries for master_ip and vlan_ip and query devices instead

The following patch aimed to resolve an issue where secondary, tertiary,
etc. addresses added to bond interfaces could overwrite the
bond->master_ip and vlan_ip values.

        commit 917fbdb32f37e9a93b00bb12ee83532982982df3
        Author: Henrik Saavedra Persson <henrik.e.persson@ericsson.com>
        Date:   Wed Nov 23 23:37:15 2011 +0000

            bonding: only use primary address for ARP

That patch was good because it prevented bonds using ARP monitoring from
sending frames with an invalid source IP address.  Unfortunately, it
didn't always work as expected.

When using an ioctl (like ifconfig does) to set the IP address and
netmask, 2 separate ioctls are actually called to set the IP and netmask
if the mask chosen doesn't match the standard mask for that class of
address.  The first ioctl did not have a mask that matched the one in
the primary address and would still cause the device address to be
overwritten.  The second ioctl that was called to set the mask would
then detect as secondary and ignored, but the damage was already done.

This was not an issue when using an application that used netlink
sockets as the setting of IP and netmask came down at once.  The
inconsistent behavior between those two interfaces was something that
needed to be resolved.

While I was thinking about how I wanted to resolve this, Ralf Zeidler
came with a patch that resolved this on a RHEL kernel by keeping a full
shadow of the entries in dev->ifa_list for the bonding device and vlan
devices in the bonding driver.  I didn't like the duplication of the
list as I want to see the 'bonding' struct and code shrink rather than
grow, but liked the general idea.

As the Subject indicates this patch drops the master_ip and vlan_ip
elements from the 'bonding' and 'vlan_entry' structs, respectively.
This can be done because a device's address-list is now traversed to
determine the optimal source IP address for ARP requests and for checks
to see if the bonding device has a particular IP address.  This code
could have all be contained inside the bonding driver, but it made more
sense to me to EXPORT and call inet_confirm_addr since it did exactly
what was needed.

I tested this and a backported patch and everything works as expected.
Ralf also helped with verification of the backported patch.

Thanks to Ralf for all his help on this.

v2: Whitespace and organizational changes based on suggestions from Jay
Vosburgh and Dave Miller.

v3: Fixup incorrect usage of rcu_read_unlock based on Dave Miller's
suggestion.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
CC: Ralf Zeidler <ralf.zeidler@nsn.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonetfilter: remove forward module param confusion.
Rusty Russell [Thu, 22 Mar 2012 12:27:06 +0000]
netfilter: remove forward module param confusion.

It used to be an int, and it got changed to a bool parameter at least
7 years ago.  It happens that NF_ACCEPT and NF_DROP are 0 and 1, so
this works, but it's unclear, and the check that it's in range is not
required.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo...
Linus Torvalds [Fri, 23 Mar 2012 01:20:02 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/lliubbo/blackfin

Pull blackfin updates from Bob Liu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (24 commits)
  blackfin: clean up string bfin_dma_5xx after rename.
  blackfin:dma: rename bfin_dma_5xx.c to bfin_dma.c
  bf548: ssm2602: Add ssm2602 platform data into bf548 ezkit board file.
  Blackfin: s/#if CONFIG/#ifdef CONFIG/
  Blackfin: pnav: delete duplicate linux/export.h include
  bf561: add ppi DLEN macro for 10bits to 16bits
  arch: blackfin: udpate defconfig
  Disintegrate asm/system.h for Blackfin [ver #2]
  arch/blackfin: don't generate random mac in bfin_get_ether_addr()
  Blackfin: wire up new process_vm syscalls
  blackfin: cleanup anomaly workarounds
  blackfin: update default defconfig
  blackfin: thread_info: add suspend flag
  bfin: add bfin_ad73311_machine platform device
  blackfin: bf537: stamp: update board file for 193x
  blackfin: kgdb: skip hardware watchpoint test
  bf548: add ppi interrupt mask and blanking clocks
  blackfin: bf561: forgot CSYNC in get_core_lock_noflush
  spi/bfin_spi: drop bits_per_word from client data
  blackfin: cplb-mpu: fix page mask table overflow
  ...

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Linus Torvalds [Fri, 23 Mar 2012 01:15:32 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/s390/linux

Pull s390 patches from Martin Schwidefsky:
 "The biggest patch is the rework of the smp code, something I wanted to
  do for some time.  There are some patches for our various dump methods
  and one new thing: z/VM LGR detection.  LGR stands for linux-guest-
  relocation and is the guest migration feature of z/VM.  For debugging
  purposes we keep a log of the systems where a specific guest has lived."

Fix up trivial conflict in arch/s390/kernel/smp.c due to the scheduler
cleanup having removed some code next to removed s390 code.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  [S390] kernel: Pass correct stack for smp_call_ipl_cpu()
  [S390] Ensure that vmcore_info pointer is never accessed directly
  [S390] dasd: prevent validate server for offline devices
  [S390] Remove monolithic build option for zcrypt driver.
  [S390] stack dump: fix indentation in output
  [S390] kernel: Add OS info memory interface
  [S390] Use block_sigmask()
  [S390] kernel: Add z/VM LGR detection
  [S390] irq: external interrupt code passing
  [S390] irq: set __ARCH_IRQ_EXIT_IRQS_DISABLED
  [S390] zfcpdump: Implement async sdias event processing
  [S390] Use copy_to_absolute_zero() instead of "stura/sturg"
  [S390] rework idle code
  [S390] rework smp code
  [S390] rename lowcore field
  [S390] Fix gcc 4.6.0 compile warning

7 years agosecurity: optimize avc_audit() common path
Linus Torvalds [Fri, 23 Mar 2012 00:01:41 +0000]
security: optimize avc_audit() common path

avc_audit() did a lot of jumping around and had a big stack frame, all
for the uncommon case.

Split up the uncommon case (which we really can't make go fast anyway)
into its own slow function, and mark the conditional branches
appropriately for the common likely case.

This causes avc_audit() to no longer show up as one of the hottest
functions on the branch profiles (the new "perf -b" thing), and makes
the cycle profiles look really nice and dense too.

The whole audit path is still annoyingly very much one of the biggest
costs of name lookup, so these things are worth optimizing for.  I wish
we could just tell people to turn it off, but realistically we do need
it: we just need to make sure that the overhead of the necessary evil is
as low as possible.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agousbnet: don't clear urb->dev in tx_complete
tom.leiming@gmail.com [Thu, 22 Mar 2012 03:22:38 +0000]
usbnet: don't clear urb->dev in tx_complete

URB unlinking is always racing with its completion and tx_complete
may be called before or during running usb_unlink_urb, so tx_complete
must not clear urb->dev since it will be used in unlink path,
otherwise invalid memory accesses or usb device leak may be caused
inside usb_unlink_urb.

Cc: stable@kernel.org
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agousbnet: increase URB reference count before usb_unlink_urb
tom.leiming@gmail.com [Thu, 22 Mar 2012 03:22:18 +0000]
usbnet: increase URB reference count before usb_unlink_urb

Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid
recursive locking in usbnet_stop()) fixes the recursive locking
problem by releasing the skb queue lock, but it makes usb_unlink_urb
racing with defer_bh, and the URB to being unlinked may be freed before
or during calling usb_unlink_urb, so use-after-free problem may be
triggerd inside usb_unlink_urb.

The patch fixes the use-after-free problem by increasing URB
reference count with skb queue lock held before calling
usb_unlink_urb, so the URB won't be freed until return from
usb_unlink_urb.

Cc: stable@kernel.org
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Oliver Neukum <oliver@neukum.org>
Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoxfrm: Access the replay notify functions via the registered callbacks
Steffen Klassert [Wed, 21 Mar 2012 23:36:13 +0000]
xfrm: Access the replay notify functions via the registered callbacks

We call the wrong replay notify function when we use ESN replay
handling. This leads to the fact that we don't send notifications
if we use ESN. Fix this by calling the registered callbacks instead
of xfrm_replay_notify().

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoxfrm: Remove unused xfrm_state from xfrm_state_check_space
Steffen Klassert [Wed, 21 Mar 2012 23:32:39 +0000]
xfrm: Remove unused xfrm_state from xfrm_state_check_space

The xfrm_state argument is unused in this function, so remove it.
Also the name xfrm_state_check_space does not really match what this
function does. It actually checks if we have enough head and tailroom
on the skb. So we rename the function to xfrm_skb_check_space.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoRDS: use gfp flags from caller in conn_alloc()
Dan Carpenter [Wed, 21 Mar 2012 20:44:09 +0000]
RDS: use gfp flags from caller in conn_alloc()

We should be using the gfp flags the caller specified here, instead of
GFP_KERNEL.  I think this might be a bugfix, depending on the value of
"sock->sk->sk_allocation" when we call rds_conn_create_outgoing() in
rds_sendmsg().  Otherwise, it's just a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonetlabel: use GFP flags from caller instead of GFP_ATOMIC
Dan Carpenter [Wed, 21 Mar 2012 20:41:01 +0000]
netlabel: use GFP flags from caller instead of GFP_ATOMIC

This function takes a GFP flags as a parameter, but they are never used.
We don't take a lock in this function so there is no reason to prefer
GFP_ATOMIC over the caller's GFP flags.

There is only one caller, cipso_v4_map_cat_rng_ntoh(), and it passes
GFP_ATOMIC as the GFP flags so this doesn't change how the code works.
It's just a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>