7 years agosocket: initial cgroup code.
Glauber Costa [Sun, 11 Dec 2011 21:47:03 +0000]
socket: initial cgroup code.

The goal of this work is to move the memory pressure tcp
controls to a cgroup, instead of just relying on global
conditions.

To avoid excessive overhead in the network fast paths,
the code that accounts allocated memory to a cgroup is
hidden inside a static_branch(). This branch is patched out
until the first non-root cgroup is created. So when nobody
is using cgroups, even if it is mounted, no significant performance
penalty should be seen.

This patch handles the generic part of the code, and has nothing
tcp-specific.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujtsu.com>
CC: Kirill A. Shutemov <kirill@shutemov.name>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agofoundations of per-cgroup memory pressure controlling.
Glauber Costa [Sun, 11 Dec 2011 21:47:02 +0000]
foundations of per-cgroup memory pressure controlling.

This patch replaces all uses of struct sock fields' memory_pressure,
memory_allocated, sockets_allocated, and sysctl_mem to acessor
macros. Those macros can either receive a socket argument, or a mem_cgroup
argument, depending on the context they live in.

Since we're only doing a macro wrapping here, no performance impact at all is
expected in the case where we don't have cgroups disabled.

Signed-off-by: Glauber Costa <glommer@parallels.com>
Reviewed-by: Hiroyouki Kamezawa <kamezawa.hiroyu@jp.fujitsu.com>
CC: David S. Miller <davem@davemloft.net>
CC: Eric W. Biederman <ebiederm@xmission.com>
CC: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoBasic kernel memory functionality for the Memory Controller
Glauber Costa [Sun, 11 Dec 2011 21:47:01 +0000]
Basic kernel memory functionality for the Memory Controller

This patch lays down the foundation for the kernel memory component
of the Memory Controller.

As of today, I am only laying down the following files:

 * memory.independent_kmem_limit
 * memory.kmem.limit_in_bytes (currently ignored)
 * memory.kmem.usage_in_bytes (always zero)

Signed-off-by: Glauber Costa <glommer@parallels.com>
CC: Kirill A. Shutemov <kirill@shutemov.name>
CC: Paul Menage <paul@paulmenage.org>
CC: Greg Thelen <gthelen@google.com>
CC: Johannes Weiner <jweiner@redhat.com>
CC: Michal Hocko <mhocko@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoxen-netfront: delay gARP until backend switches to Connected
Laszlo Ersek [Sun, 11 Dec 2011 01:48:59 +0000]
xen-netfront: delay gARP until backend switches to Connected

After a guest is live migrated, the xen-netfront driver emits a gratuitous
ARP message, so that networking hardware on the target host's subnet can
take notice, and public routing to the guest is re-established. However,
if the packet appears on the backend interface before the backend is added
to the target host's bridge, the packet is lost, and the migrated guest's
peers become unable to talk to the guest.

A sufficient two-parts condition to prevent the above is:

(1) ensure that the backend only moves to Connected xenbus state after its
hotplug scripts completed, ie. the netback interface got added to the
bridge; and

(2) ensure the frontend only queues the gARP when it sees the backend move
to Connected.

These two together provide complete ordering. Sub-condition (1) is already
satisfied by commit f942dc2552b8 in Linus' tree, based on commit
6b0b80ca7165 from [1].

In general, the full condition is sufficient, not necessary, because,
according to [2], live migration has been working for a long time without
satisfying sub-condition (2). However, after 6b0b80ca7165 was backported
to the RHEL-5 host to ensure (1), (2) still proved necessary in the RHEL-6
guest. This patch intends to provide (2) for upstream.

The Reviewed-by line comes from [3].

[1] git://xenbits.xen.org/people/ianc/linux-2.6.git#upstream/dom0/backend/netback-history
[2] http://old-list-archives.xen.org/xen-devel/2011-06/msg01969.html
[3] http://old-list-archives.xen.org/xen-devel/2011-07/msg00484.html

Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Mon, 12 Dec 2011 19:19:43 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next into for-davem

7 years agonet: use IS_ENABLED(CONFIG_IPV6)
Eric Dumazet [Sat, 10 Dec 2011 09:48:31 +0000]
net: use IS_ENABLED(CONFIG_IPV6)

Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobe2net: workaround to fix a bug in BE
Ajit Khaparde [Fri, 9 Dec 2011 13:53:17 +0000]
be2net: workaround to fix a bug in BE

disable Tx vlan offloading in certain cases.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobe2net: update some counters to display via ethtool
Ajit Khaparde [Fri, 9 Dec 2011 13:53:09 +0000]
be2net: update some counters to display via ethtool

update pmem_fifo_overflow_drop, rx_priority_pause_frames counters.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoudp_diag: Fix the !ipv6 case
Pavel Emelyanov [Fri, 9 Dec 2011 23:35:07 +0000]
udp_diag: Fix the !ipv6 case

Wrap the udp6 lookup into the proper ifdef-s.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoudp_diag: Make it module when ipv6 is a module
Pavel Emelyanov [Fri, 9 Dec 2011 23:33:43 +0000]
udp_diag: Make it module when ipv6 is a module

Eric Dumazet reported, that when inet_diag is built-in the udp_diag also goes
built-in and when ipv6 is a module the udp6 lookup symbol is not found.

  LD      .tmp_vmlinux1
net/built-in.o: In function `udp_dump_one':
udp_diag.c:(.text+0xa2b40): undefined reference to `__udp6_lib_lookup'
make: *** [.tmp_vmlinux1] Erreur 1

Fix this by making udp diag build mode depend on both -- inet diag and ipv6.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoiwlwifi regression in 20111205 merge
Nikolay Martynov [Fri, 9 Dec 2011 02:43:39 +0000]
iwlwifi regression in 20111205 merge

  It looks like the regression was introduced between 20111202 and
20111205 (linux-next tree). Symptoms: connection to AP seem to be
established, but no data goes though it in any way. Tested on intel
5300.
  Peek at the changes have shown that it looks like at least part of
the code wasn't merged properly. It was originally committed into
iwl_agn.c but code in question was moved to iwl-mac80211.c.
  This patch puts code in place and my card works again.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agowl12xx: silence tx_attr uninitialized warning in wl1271_tx_fill_hdr
John W. Linville [Thu, 8 Dec 2011 21:15:58 +0000]
wl12xx: silence tx_attr uninitialized warning in wl1271_tx_fill_hdr

CC [M] drivers/net/wireless/wl12xx/tx.o
drivers/net/wireless/wl12xx/tx.c: In function ‘wl1271_tx_fill_hdr’:
drivers/net/wireless/wl12xx/tx.c:288:6: warning: ‘tx_attr’ may be used uninitialized in this function

Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoudp_diag: Wire the udp_diag module into kbuild
Pavel Emelyanov [Fri, 9 Dec 2011 06:24:36 +0000]
udp_diag: Wire the udp_diag module into kbuild

Copy-s/tcp/udp/-paste from TCP bits.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoudp_diag: Implement the dump-all functionality
Pavel Emelyanov [Fri, 9 Dec 2011 06:24:21 +0000]
udp_diag: Implement the dump-all functionality

Do the same as TCP does -- iterate the given udp_table, filter
sockets with bytecode and dump sockets into reply message.

The same filtering as for TCP applies, though only some of the
state bits really matter.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoudp_diag: Implement the get_exact dumping functionality
Pavel Emelyanov [Fri, 9 Dec 2011 06:24:06 +0000]
udp_diag: Implement the get_exact dumping functionality

Do the same as TCP does -- lookup a socket in the given udp_table,
check cookie, fill the reply message with existing inet socket dumping
helper and send one back.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoudp_diag: Basic skeleton
Pavel Emelyanov [Fri, 9 Dec 2011 06:23:51 +0000]
udp_diag: Basic skeleton

Introduce the transport level diag handler module for UDP (and UDP-lite)
sockets and register (empty for now) callbacks in the inet_diag module.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoudp: Export code sk lookup routines
Pavel Emelyanov [Fri, 9 Dec 2011 06:23:34 +0000]
udp: Export code sk lookup routines

The UDP diag get_exact handler will require them to find a
socket by provided net, [sd]addr-s, [sd]ports and device.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinet_diag: Generalize inet_diag dump and get_exact calls
Pavel Emelyanov [Fri, 9 Dec 2011 06:23:18 +0000]
inet_diag: Generalize inet_diag dump and get_exact calls

Introduce two callbacks in inet_diag_handler -- one for dumping all
sockets (with filters) and the other one for dumping a single sk.

Replace direct calls to icsk handlers with indirect calls to callbacks
provided by handlers.

Make existing TCP and DCCP handlers use provided helpers for icsk-s.

The UDP diag module will provide its own.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinet_diag: Introduce the inet socket dumping routine
Pavel Emelyanov [Fri, 9 Dec 2011 06:23:00 +0000]
inet_diag: Introduce the inet socket dumping routine

The existing inet_csk_diag_fill dumps the inet connection sock info
into the netlink inet_diag_message. Prepare this routine to be able
to dump only the inet_sock part of a socket if the icsk part is missing.

This will be used by UDP diag module when dumping UDP sockets.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinet_diag: Introduce the byte-code run on an inet socket
Pavel Emelyanov [Fri, 9 Dec 2011 06:22:44 +0000]
inet_diag: Introduce the byte-code run on an inet socket

The upcoming UDP module will require exactly this ability, so just
move the existing code to provide one.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinet_diag: Split inet_diag_get_exact into parts
Pavel Emelyanov [Fri, 9 Dec 2011 06:22:26 +0000]
inet_diag: Split inet_diag_get_exact into parts

Similar to previous patch: the 1st part locks the inet handler
and will get generalized and the 2nd one dumps icsk-s and will
be used by TCP and DCCP handlers.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinet_diag: Split inet_diag_get_exact into parts
Pavel Emelyanov [Fri, 9 Dec 2011 06:22:10 +0000]
inet_diag: Split inet_diag_get_exact into parts

The 1st part locks the inet handler and the 2nd one dump the
inet connection sock.

In the next patches the 1st part will be generalized to call
the socket dumping routine indirectly (i.e. TCP/UDP/DCCP) and
the 2nd part will be used by TCP and DCCP handlers.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinet_diag: Export inet diag cookie checking routine
Pavel Emelyanov [Fri, 9 Dec 2011 06:21:53 +0000]
inet_diag: Export inet diag cookie checking routine

The netlink diag susbsys stores sk address bits in the nl message
as a "cookie" and uses one when dumps details about particular
socket.

The same will be required for udp diag module, so introduce a heler
in inet_diag module

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinet_diag: Reduce the number of args for bytecode run routine
Pavel Emelyanov [Fri, 9 Dec 2011 06:21:34 +0000]
inet_diag: Reduce the number of args for bytecode run routine

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinet_diag: Remove indirect sizeof from inet diag handlers
Pavel Emelyanov [Fri, 9 Dec 2011 06:21:16 +0000]
inet_diag: Remove indirect sizeof from inet diag handlers

There's an info_size value stored on inet_diag_handler, but for existing
code this value is effectively constant, so just use sizeof(struct tcp_info)
where required.

Signed-off-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agosch_red: generalize accurate MAX_P support to RED/GRED/CHOKE
Eric Dumazet [Fri, 9 Dec 2011 02:46:45 +0000]
sch_red: generalize accurate MAX_P support to RED/GRED/CHOKE

Now RED uses a Q0.32 number to store max_p (max probability), allow
RED/GRED/CHOKE to use/report full resolution at config/dump time.

Old tc binaries are non aware of new attributes, and still set/get Plog.

New tc binary set/get both Plog and max_p for backward compatibility,
they display "probability value" if they get max_p from new kernels.

# tc -d  qdisc show dev ...
...
qdisc red 10: parent 1:1 limit 360Kb min 30Kb max 90Kb ecn ewma 5
probability 0.09 Scell_log 15

Make sure we avoid potential divides by 0 in reciprocal_value(), if
(max_th - min_th) is big.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoRevert "net: netprio_cgroup: make net_prio_subsys static"
John Fastabend [Fri, 9 Dec 2011 18:39:27 +0000]
Revert "net: netprio_cgroup: make net_prio_subsys static"

This reverts commit 865d9f9f748fdc1943679ea65d9ee1dc55e4a6ae.

This commit breaks the build with CONFIG_NETPRIO_CGROUP=y so
revert it. It does build as a module though. The SUBSYS macro
in the cgroup core code automatically defines a subsys structure
as extern. Long term we should fix the macro. And I need to
fully build test things.

Tested with CONFIG_NETPRIO_CGROUP={y|m|n} with and without
CONFIG_CGROUPS defined.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
CC: Neil Horman <nhorman@tuxdriver.com>
Reported-By: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agosock_diag: off by one checks
Dan Carpenter [Wed, 7 Dec 2011 20:49:38 +0000]
sock_diag: off by one checks

These tests are off by one because sock_diag_handlers[] only has AF_MAX
elements.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet: netprio_cgroup: make net_prio_subsys static
John Fastabend [Wed, 7 Dec 2011 19:17:17 +0000]
net: netprio_cgroup: make net_prio_subsys static

net_prio_subsys can be made static this removes the sparse
warning it was throwing.

Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: properly initialize L5 features
Dmitry Kravkov [Thu, 8 Dec 2011 08:04:07 +0000]
bnx2x: properly initialize L5 features

The code is missing initialization of NO_FCOE_FLAG and NO_ISCSI*FLAGS
when CONFIG_CNIC is not selected.
This causes panic during driver load since commit
1d187b34daaecbb87aa523ba46b92930a388cb21 where NO_FCOE tested
unconditionally (outside #ifdef BCM_CNIC  structure) and
accessed fp[FCOE_IDX] which is not allocated.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agovlan: add 802.1q netpoll support
Benjamin LaHaise [Thu, 8 Dec 2011 06:20:49 +0000]
vlan: add 802.1q netpoll support

Add netpoll support to 802.1q vlan devices.  Based on the netpoll support
in the bridging code.  Tested on a forced_eth device with netconsole.

Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agosch_red: Adaptative RED AQM
Eric Dumazet [Thu, 8 Dec 2011 06:06:03 +0000]
sch_red: Adaptative RED AQM

Adaptative RED AQM for linux, based on paper from Sally FLoyd,
Ramakrishna Gummadi, and Scott Shenker, August 2001 :

http://icir.org/floyd/papers/adaptiveRed.pdf

Goal of Adaptative RED is to make max_p a dynamic value between 1% and
50% to reach the target average queue : (max_th - min_th) / 2

Every 500 ms:
 if (avg > target and max_p <= 0.5)
  increase max_p : max_p += alpha;
 else if (avg < target and max_p >= 0.01)
  decrease max_p : max_p *= beta;

target :[min_th + 0.4*(min_th - max_th),
          min_th + 0.6*(min_th - max_th)].
alpha : min(0.01, max_p / 4)
beta : 0.9
max_P is a Q0.32 fixed point number (unsigned, with 32 bits mantissa)

Changes against our RED implementation are :

max_p is no longer a negative power of two (1/(2^Plog)), but a Q0.32
fixed point number, to allow full range described in Adatative paper.

To deliver a random number, we now use a reciprocal divide (thats really
a multiply), but this operation is done once per marked/droped packet
when in RED_BETWEEN_TRESH window, so added cost (compared to previous
AND operation) is near zero.

dump operation gives current max_p value in a new TCA_RED_MAX_P
attribute.

Example on a 10Mbit link :

tc qdisc add dev $DEV parent 1:1 handle 10: est 1sec 8sec red \
   limit 400000 min 30000 max 90000 avpkt 1000 \
   burst 55 ecn adaptative bandwidth 10Mbit

# tc -s -d qdisc show dev eth3
...
qdisc red 10: parent 1:1 limit 400000b min 30000b max 90000b ecn
adaptative ewma 5 max_p=0.113335 Scell_log 15
 Sent 50414282 bytes 34504 pkt (dropped 35, overlimits 1392 requeues 0)
 rate 9749Kbit 831pps backlog 72056b 16p requeues 0
  marked 1357 early 35 pdrop 0 other 0

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoteam: use vlan_vids_[addr/del]_by_dev
Jiri Pirko [Thu, 8 Dec 2011 04:11:20 +0000]
team: use vlan_vids_[addr/del]_by_dev

So far when vlan id was added to team device befor port was added, this
vid was not added to port's vlan filter. Also after removal, vid stayed
in port device's vlan filter. Benefit of new vlan functions to handle
this work.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agovlan: introduce functions to do mass addition/deletion of vids by another device
Jiri Pirko [Thu, 8 Dec 2011 04:11:19 +0000]
vlan: introduce functions to do mass addition/deletion of vids by another device

Introduce functions handy to copy vlan ids from one driver's list to
another.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agovlan: introduce vid list with reference counting
Jiri Pirko [Thu, 8 Dec 2011 04:11:18 +0000]
vlan: introduce vid list with reference counting

This allows to keep track of vids needed to be in rx vlan filters of
devices even if they are used in bond/team etc.

vlan_info as well as vlan_group previously was, is allocated when first
vid is added and dealocated whan last vid is deleted.

vlan_group definition is moved to private header.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo...
Jiri Pirko [Thu, 8 Dec 2011 04:11:17 +0000]
net: introduce vlan_vid_[add/del] and use them instead of direct [add/kill]_vid ndo calls

This patch adds wrapper for ndo_vlan_rx_add_vid/ndo_vlan_rx_kill_vid
functions. Check for NETIF_F_HW_VLAN_FILTER feature is done in this
wrapper.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet: make vlan ndo_vlan_rx_[add/kill]_vid return error value
Jiri Pirko [Fri, 9 Dec 2011 00:52:37 +0000]
net: make vlan ndo_vlan_rx_[add/kill]_vid return error value

Let caller know the result of adding/removing vlan id to/from vlan
filter.

In some drivers I make those functions to just return 0. But in those
where there is able to see if hw setup went correctly, return value is
set appropriately.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agovlan: rename vlan_dev_info to vlan_dev_priv
Jiri Pirko [Thu, 8 Dec 2011 04:11:15 +0000]
vlan: rename vlan_dev_info to vlan_dev_priv

As this structure is priv, name it approprietely. Also for pointer to it
use name "vlan".

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobe2net: netpoll support
Ivan Vecera [Thu, 8 Dec 2011 01:31:21 +0000]
be2net: netpoll support

Add missing netpoll support.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/fec: make FEC driver buildable as module
Lothar Waßmann [Wed, 7 Dec 2011 21:59:32 +0000]
net/fec: make FEC driver buildable as module

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/fec: fix the .remove code
Lothar Waßmann [Wed, 7 Dec 2011 21:59:31 +0000]
net/fec: fix the .remove code

The .remove code is broken in several ways.
 - mdiobus_unregister() is called twice for the same object in case of dual FEC
 - phy_disconnect() is being called when the PHY is already disconnected
 - the requested IRQ(s) are not freed
 - fec_stop() is being called with the inteface already stopped

 All of those lead to kernel crashes if the remove function is actually used.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/fec: preserve MII/RMII setting in fec_stop()
Lothar Waßmann [Wed, 7 Dec 2011 21:59:30 +0000]
net/fec: preserve MII/RMII setting in fec_stop()

Additionally to setting the ETHER_EN bit in FEC_ECNTRL the MII/RMII
setting in FEC_R_CNTRL needs to be preserved to keep the MII interface
functional.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/fec: don't munge MAC address from platform data
Lothar Waßmann [Wed, 7 Dec 2011 21:59:29 +0000]
net/fec: don't munge MAC address from platform data

When the MAC address is supplied via platform_data it should be OK as
it is and should not be modified in case of a dual FEC setup.
Also copying the MAC from platform_data to the single 'macaddr'
variable will overwrite the MAC for the first interface in case of a
dual FEC setup.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/fec: don't request invalid IRQ
Lothar Waßmann [Wed, 7 Dec 2011 21:59:28 +0000]
net/fec: don't request invalid IRQ

prevent calling request_irq() with a known invalid IRQ number and
preserve the return value of the platform_get_irq() function

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/fec: prevent dobule restart of interface on FDX/HDX change
Lothar Waßmann [Wed, 7 Dec 2011 21:59:27 +0000]
net/fec: prevent dobule restart of interface on FDX/HDX change

Upon detection of a FDX/HDX change the interface is restarted twice.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/fec: set con_id in clk_get() call to NULL
Lothar Waßmann [Wed, 7 Dec 2011 21:59:26 +0000]
net/fec: set con_id in clk_get() call to NULL

The con_id is actually not needed for clk_get().

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/fec: misc cleanups
Lothar Waßmann [Wed, 7 Dec 2011 21:59:25 +0000]
net/fec: misc cleanups

- remove some bogus whitespace
 - remove line wraps from printk messages

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agotg3: Update version to 3.122
Matt Carlson [Thu, 8 Dec 2011 14:40:18 +0000]
tg3: Update version to 3.122

This patch updates the tg3 version to 3.122.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agotg3: Return flowctrl config through ethtool
Matt Carlson [Thu, 8 Dec 2011 14:40:17 +0000]
tg3: Return flowctrl config through ethtool

This patch changes the driver to return the flow control configuration
rather than the flow control status through the ETHTOOL_GPAUSEPARAM
ioctl.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agotg3: Track LP advertising
Matt Carlson [Thu, 8 Dec 2011 14:40:16 +0000]
tg3: Track LP advertising

This patch adds code to track the autonegotiation advertisements of the
link partner and report them through ethtool.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agotg3: Integrate flowctrl check into AN adv check
Matt Carlson [Thu, 8 Dec 2011 14:40:15 +0000]
tg3: Integrate flowctrl check into AN adv check

This patch integrates tg3_adv_1000T_flowctrl_ok() into
tg3_copper_is_advertising_all() and renames the function
tg3_phy_copper_an_config_ok().

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agotg3: Save stats across chip resets
Matt Carlson [Thu, 8 Dec 2011 14:40:14 +0000]
tg3: Save stats across chip resets

Tg3 has a place to store stats, but doesn't really use it.  This patch
modifies the driver so that stats are saved across chip resets and gets
cleared across close / open calls.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agotg3: Remove ethtool stats member from dev struct
Matt Carlson [Thu, 8 Dec 2011 14:40:13 +0000]
tg3: Remove ethtool stats member from dev struct

This patch removes the ethtool stats member from the tg3 device
structure.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Reviewed-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobridge: add local MAC address to forwarding table (v2)
stephen hemminger [Thu, 8 Dec 2011 07:17:49 +0000]
bridge: add local MAC address to forwarding table (v2)

If user has configured a MAC address that is not one of the existing
ports of the bridge, then we need to add a special entry in the forwarding
table. This forwarding table entry has no outgoing port so it has to be
treated a little differently. The special entry is reported by the netlink
interface with ifindex of bridge, but ignored by the old interface since there
is no usable way to put it in the ABI.

Reported-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobridge: rearrange fdb notifications (v2)
stephen hemminger [Thu, 8 Dec 2011 07:17:41 +0000]
bridge: rearrange fdb notifications (v2)

Pass bridge to fdb_notify so it can determine correct namespace based
on namespace of bridge rather than namespace of destination port.
Also makes next patch easier.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobridge: refactor fdb_notify
stephen hemminger [Tue, 6 Dec 2011 13:02:24 +0000]
bridge: refactor fdb_notify

Move fdb_notify outside of fdb_create. This fixes the problem
that notification of local entries are not flagged correctly.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'wl12xx-next' into for-linville
Luciano Coelho [Thu, 8 Dec 2011 11:08:10 +0000]
Merge branch 'wl12xx-next' into for-linville

7 years agowl12xx: minor fix in sched_scan_ssid_list
Eyal Shapira [Wed, 7 Dec 2011 10:37:04 +0000]
wl12xx: minor fix in sched_scan_ssid_list

The user can pass broadcast SSID (ssid="") in the list of SSIDs for active scan.
In this case the loop was attempting to match SSIDs in the filter
list to this empty entry and marking them as HIDDEN (sending probe
request) by mistake

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

7 years agowl12xx: send testmode reply in wl1271_tm_cmd_interrogate
Eliad Peller [Tue, 6 Dec 2011 10:15:07 +0000]
wl12xx: send testmode reply in wl1271_tm_cmd_interrogate

wl1271_tm_cmd_interrogate creates a reply skb, but doesn't
send it (and thus just leaks it).
Add the missing cfg80211_testmode_reply() call.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

7 years agowl12xx: remove redundant commands from plt init
Eliad Peller [Tue, 6 Dec 2011 10:15:06 +0000]
wl12xx: remove redundant commands from plt init

During plt init we configure some redundant commands,
which are not needed for plt (specifically, we shouldn't
configure any role-specific params, as there are no
active roles). remove them.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

7 years agowl12xx: fix testmode test/interrogate commands
Eliad Peller [Tue, 6 Dec 2011 10:15:05 +0000]
wl12xx: fix testmode test/interrogate commands

fix several issues in testmode test/interrogate commands:
1. check the driver state is not OFF.
2. wakeup the chip from elp (if needed)
3. fix memory leak in wl1271_tm_cmd_interrogate()

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

7 years agowireless: disable wext sysfs by default
Johannes Berg [Tue, 6 Dec 2011 19:45:37 +0000]
wireless: disable wext sysfs by default

This code has been on the list to remove for a long
time, so disable it by default, add a warning to its
Kconfig, and schedule it for removal in 3.5.

The only known dependency, hal, has not required it
since its 0.5.12 release, which was in early 2009
and hal has since been deprecated completely.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: enable ANI for ar9100 chips
Nikolay Martynov [Wed, 7 Dec 2011 02:57:17 +0000]
ath9k: enable ANI for ar9100 chips

  Enable ANI for ar9100 since it seems to be working fine (and as a
matter of fact ANI was always performed for ar9100 since code which
was supposed to disable it didn't achieve this goal).
  This patch sets config.enable_ani to default (true) value for
ar9100.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: use config.enable_ani to check if ani should be performed
Nikolay Martynov [Sat, 3 Dec 2011 03:39:16 +0000]
ath9k: use config.enable_ani to check if ani should be performed

  Currently in ath9k code there is an attempt which is meant to
disable ANI for ar9100 and ar9340. But it doesn't really achieve
this. All it does is disable ANI init and setup (i.e. calls to
ath9k_hw_ani_setup and ath9k_hw_ani_init). Since ath9k_hw_ani_setup is
not called ah->config.ani_poll_interval is never initialized (i.e. it
is always zero) and ath_ani_calibrate always executes ANI procedures
(over uninitialized ANI parameters).
  Moreover, ath_ani_calibrate is being called each 1ms because
common->ani.timer is set to zero interval because
ah->config.ani_poll_interval==0 (and thus smallest value of all
intervals). Normally it should not be called this often.
  This patch changes the code so config.enable_ani is used to check if
ANI should be performed.
  config.enable_ani is initialized to true by default. This patch sets
it to false for ar9100 and ar9340.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: change calibration debug log to output all calibration types
Nikolay Martynov [Sat, 3 Dec 2011 03:39:15 +0000]
ath9k: change calibration debug log to output all calibration types

  To help debugging write a log entry when long calibration, short
calibration or ANI is performed.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: trivial: cosmetic fix in calibration debug log
Nikolay Martynov [Sat, 3 Dec 2011 03:39:14 +0000]
ath9k: trivial: cosmetic fix in calibration debug log

  Add missed space and change typo in calibration debugging log.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: cancel all workqueue activity when going idle
Felix Fietkau [Wed, 16 Nov 2011 12:08:43 +0000]
ath9k: cancel all workqueue activity when going idle

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: only drop packets in drv_flush when asked to
Felix Fietkau [Wed, 16 Nov 2011 12:08:42 +0000]
ath9k: only drop packets in drv_flush when asked to

Recently more places in mac80211 call drv_flush to ensure proper order
for state changes wrt. powersave, channel changes, etc. On some systems
such calls lead to spurious logspam about failing to stop tx dma, as well
as hardware resets that go along with that.
Instead of dropping packets in a place where it's completely unnecessary,
only do it when drop == true.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: rework power state handling
Felix Fietkau [Wed, 16 Nov 2011 12:08:41 +0000]
ath9k: rework power state handling

Turning off the radio when mac80211 tells the driver that it's idle is not
a good idea, as idle interfaces might still occasionally scan or send packets.
The only time the radio can be safely turned off is when drv_stop has been
called. In the mean time, use sc->ps_idle only to indicate network sleep vs
full sleep.
Move the LED GPIO changes out of the PCI suspend/resume path, the start/stop
functions already take care of that.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: always issue a full hw reset after waking up from full-sleep mode
Felix Fietkau [Wed, 16 Nov 2011 12:08:40 +0000]
ath9k: always issue a full hw reset after waking up from full-sleep mode

After waking up from full sleep, registers are accessible, but rx/tx
typically fails. A fast channel change will not recover from this, so
ensure that a full-sleep -> wake transition is always followed by a full
reset.

The reason why this hasn't created any serious problems yet is that it's
hidden by the (wrong) behavior of enabling/disabling the radio when the
wiphy idle state changes.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agobnx2x: fix typo in fcoe stats collection
Barak Witkowski [Wed, 7 Dec 2011 03:45:36 +0000]
bnx2x: fix typo in fcoe stats collection

Signed-off-by: Barak Witkowski <barak@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
David S. Miller [Wed, 7 Dec 2011 02:10:05 +0000]
Merge git://git./linux/kernel/git/davem/net

7 years agocaif: Replace BUG_ON with WARN_ON.
Roar Førde [Tue, 6 Dec 2011 12:15:44 +0000]
caif: Replace BUG_ON with WARN_ON.

BUG_ON is too strict in a number of circumstances,
use WARN_ON instead. Protocol errors should not halt the system.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agocaif-shm: Bugfixes for caif_shmcore.c
sjur.brandeland@stericsson.com [Tue, 6 Dec 2011 12:15:43 +0000]
caif-shm: Bugfixes for caif_shmcore.c

Various bugfixes for caif_shmcore.c:
- fix deadlocks due to improper usage of spin-lock
- add missing spin-lock init
- don't call dev_kfree_skb() with irqs disabled,
  use dev_kfree_skb_irq() instead.
- fix potential skb null pointer de-reference.

Squashed original patches from:
Rabin Vincent <rabin.vincent@stericsson.com>
Durga Prasada Rao BATHINA <durgaprasadarao.b@stericcson.com>
Arun Murthy <arun.murthy@stericsson.com>
Bibek Basu <bibek.basu@stericsson.com>

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agocaif: Bad assert triggering false positive.
sjur.brandeland@stericsson.com [Tue, 6 Dec 2011 12:15:42 +0000]
caif: Bad assert triggering false positive.

Fix bad assert on fragment size triggering false positive.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agocaif-hsi: Remove wake line modification when flushing FIFO
Christian Auby [Tue, 6 Dec 2011 12:15:41 +0000]
caif-hsi: Remove wake line modification when flushing FIFO

Raising wake before flushing FIFO and lowering it after caused a
spike on AC wake that were sometimes detected and acted upon by the
modem. Fixed this by remove wake line modification when flushing FIFO.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().
David S. Miller [Tue, 6 Dec 2011 22:04:13 +0000]
ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().

And return error pointers.

Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoipv6: Make third arg to anycast_dst_alloc() bool.
David S. Miller [Tue, 6 Dec 2011 21:48:14 +0000]
ipv6: Make third arg to anycast_dst_alloc() bool.

Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: Fix compile errors if CONFIG_CNIC is not set
Michael Chan [Tue, 6 Dec 2011 10:58:08 +0000]
bnx2x: Fix compile errors if CONFIG_CNIC is not set

Don't provide FCoE and iSCSI statistics to management firmware if
CONFIG_CNIC is not set.  Some needed structure fields are not defined
without CONFIG_CNIC.

Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agomac80211: Remove WARN_ON in apply-ht-override logic.
Ben Greear [Mon, 5 Dec 2011 19:15:55 +0000]
mac80211: Remove WARN_ON in apply-ht-override logic.

AP interfaces routinely call this logic, so just silently
return when this happens instead of splatting the kernel
logs.

Reported-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agobcma: pci: use fixed windows when possible
Rafał Miłecki [Mon, 5 Dec 2011 18:13:39 +0000]
bcma: pci: use fixed windows when possible

Some cores are mapped in the fixed way, they registers can be accessed
all the time.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agomac80211: accept public action frames with mismatched BSSID
Johannes Berg [Tue, 6 Dec 2011 09:39:40 +0000]
mac80211: accept public action frames with mismatched BSSID

Arik's patch "mac80211: allow action frames with unknown
BSSID in GO mode" allowed any action frames in P2P mode
to go through, but only to cooked monitor interfaces as
the IEEE80211_RX_RA_MATCH was still cleared. As a result
my no-monitor patches broke invitation responses.

Instead of allowing any action frames in P2P GO mode to
go through with a wrong BSSID like that patch did, allow
all public action frames. They will never be processed
by mac80211, but can be reported via nl80211 then.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agomac80211: fix retransmit
Johannes Berg [Fri, 2 Dec 2011 21:08:52 +0000]
mac80211: fix retransmit

This fixes another regression from my "pass all
fragments to driver at once" patches -- if the
packet is being retransmitted then we don't go
through all handlers, but we still need to move
it to the skbs list, otherwise we run into the
first warning in __ieee80211_tx() and leak the
skb.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: move ucode notification from iwl_priv to iwl_shared
Don Fry [Fri, 2 Dec 2011 16:48:40 +0000]
iwlwifi: move ucode notification from iwl_priv to iwl_shared

Move the notification structures for ucode operations from the
iwl_priv structure to the iwl_shared structure, with associated
code changes.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: move ucode_type from iwl_priv to iwl_shared
Don Fry [Fri, 2 Dec 2011 16:48:39 +0000]
iwlwifi: move ucode_type from iwl_priv to iwl_shared

Move the ucode_type variable from the iwl_priv to the iwl_shared
structure with associated code changes.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: replace iwl_priv reference with iwl_trans for ucode.
Don Fry [Fri, 2 Dec 2011 16:48:38 +0000]
iwlwifi: replace iwl_priv reference with iwl_trans for ucode.

Replace the references to the iwl_priv structure with the iwl_trans
structure as the priv structure is never referenced other than to
access the trans structure.  Rename from iwlagn to iwl.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: rename iwl-agn-ucode as iwl-ucode
Don Fry [Fri, 2 Dec 2011 16:48:37 +0000]
iwlwifi: rename iwl-agn-ucode as iwl-ucode

iwl-agn-ucode is generic ucode operations, not limited just to iwlagn.

Signed-off-by: Don Fry <donald.h.fry@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: Rename file name from iwl-sv-open.c to iwl-testmode.c
Wey-Yi Guy [Fri, 2 Dec 2011 16:48:36 +0000]
iwlwifi: Rename file name from iwl-sv-open.c to iwl-testmode.c

The file dealing with all the operations through testmode, rename it.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: add WOWLAN uCode loading support by testmode
Hsu, Kenny [Fri, 2 Dec 2011 16:48:35 +0000]
iwlwifi: add WOWLAN uCode loading support by testmode

Create new tm command for WOWLAN uCode loading to support
further debugging function in userspace.

- IWL_TM_CMD_APP2DEV_LOAD_WOWLAN_FW

Signed-off-by: Kenny Hsu <kenny.hsu@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlagn: make debug levels more readable
Johannes Berg [Fri, 2 Dec 2011 16:48:34 +0000]
iwlagn: make debug levels more readable

Using the actual shifted constants here allows
one to read and or them more easily.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlagn: remove MACDUMP debug
Johannes Berg [Fri, 2 Dec 2011 16:48:33 +0000]
iwlagn: remove MACDUMP debug

This is only used for TX debugging where there
already is more debugging and tracing is more
useful anyway, so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlagn: remove HC_DUMP debug
Johannes Berg [Fri, 2 Dec 2011 16:48:32 +0000]
iwlagn: remove HC_DUMP debug

This debug level is unused, remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlagn: remove TX_REPLY_LIMIT debug
Johannes Berg [Fri, 2 Dec 2011 16:48:31 +0000]
iwlagn: remove TX_REPLY_LIMIT debug

This macro is unused right now.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: declare static for iwl_sram_cleanup function
Wey-Yi Guy [Fri, 2 Dec 2011 16:48:29 +0000]
iwlwifi: declare static for iwl_sram_cleanup function

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: add generic chunk size of tm dumpit packet
Hsu, Kenny [Fri, 2 Dec 2011 16:48:28 +0000]
iwlwifi: add generic chunk size of tm dumpit packet

Use generic chunk size of dumpit packet for
all necessary testmode commands instead of
add declaration individually.

Signed-off-by: Kenny Hsu <kenny.hsu@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: add range checking in tm sram read command
Kenny Hsu [Fri, 2 Dec 2011 16:48:27 +0000]
iwlwifi: add range checking in tm sram read command

The size of sram may alter according to ucode type.
Retrieve the maximum sram size by current ucode
type for range checking to prevent wrong data access.

Signed-off-by: Kenny Hsu <kenny.hsu@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwlwifi: add tm commands for sram reading by dumpit
Hsu, Kenny [Fri, 2 Dec 2011 16:48:26 +0000]
iwlwifi: add tm commands for sram reading by dumpit

Create new testmode commands and attributes to suppot
sram data reading. Because the amount of sram data
may exceed single skb packet size. Using the nl80211
dump it funtion to deliver sram data to userspace.

- IWL_TM_CMD_APP2DEV_READ_SRAM
- IWL_TM_CMD_APP2DEV_DUMP_SRAM
- IWL_TM_ATTR_SRAM_ADDR
- IWL_TM_ATTR_SRAM_SIZE
- IWL_TM_ATTR_SRAM_DUMP

Signed-off-by: Kenny Hsu <kenny.hsu@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k: clarify max_streams for AR9462
Mohammed Shafi Shajakhan [Thu, 1 Dec 2011 12:44:01 +0000]
ath9k: clarify max_streams for AR9462

max_streams for AR9462 is '2'. it does not fixes anything, but
improves the code readability

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoath9k_hw: sync to latest AR9462 INI
Mohammed Shafi Shajakhan [Thu, 1 Dec 2011 05:44:19 +0000]
ath9k_hw: sync to latest AR9462 INI

based on systems change to improve rx dynamic range,
and enables heavy clip for 5G HT40 MCS0 to improve
spectral mask power. also remove an unused function
declaration

Cc: Wilson Tsao <wtsao@qca.qualcomm.com>
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agortl8192c: Do not log firmware load message unless actually done
Larry Finger [Wed, 30 Nov 2011 16:58:14 +0000]
rtl8192c: Do not log firmware load message unless actually done

A previous commit fixed a problem whereby the rtl8192c driver loaded the
firmware from disk many times; however, the log message was not moved.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>