13 years ago[PATCH] lm70: New hardware monitoring driver
Kaiwan N Billimoria [Mon, 12 Jun 2006 20:00:05 +0000]
[PATCH] lm70: New hardware monitoring driver

This driver implements support for the National Semiconductor LM70
temperature sensor.

The LM70 temperature sensor chip supports a single temperature sensor.
It communicates with a host processor (or microcontroller) via an
SPI/Microwire Bus interface.

Communication with the LM70 is simple: when the temperature is to be sensed,
the driver accesses the LM70 using SPI communication: 16 SCLK cycles
comprise the MOSI/MISO loop. At the end of the transfer, the 11-bit 2's
complement digital temperature (sent via the SIO line), is available in the
driver for interpretation. This driver makes use of the kernel's in-core
SPI support.

Signed-off-by: Kaiwan N Billimoria <kaiwan@designergraphix.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] hwmon: Fix the Kconfig header
Jean Delvare [Mon, 12 Jun 2006 19:55:28 +0000]
[PATCH] hwmon: Fix the Kconfig header

Hardware monitoring chips don't have to be on the I2C bus.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c-i801: Merge setup function
Jean Delvare [Mon, 12 Jun 2006 19:53:41 +0000]
[PATCH] i2c-i801: Merge setup function

i2c-i801: Merge setup function

Merge i801_setup into i801_probe, as it doesn't make much sense to
have them split. This lets us handle errors better. Christopher
Hellwig had been suggesting this back in March 2003 when the driver
was merged.

Also drop two useless debug messages (revision and base address can be
obtained from lspci, procfs or sysfs.)

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c-i801: Better pci subsystem integration
Jean Delvare [Mon, 12 Jun 2006 19:53:02 +0000]
[PATCH] i2c-i801: Better pci subsystem integration

i2c-i801: Better pci subsystem integration

Integrate the i2c-i801 driver better with the pci subsystem, by
calling pci_{enable,disable}_device and requesting the I/O region
by BAR rather than direct configuration space access.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c-i801: Cleanups
Jean Delvare [Mon, 12 Jun 2006 19:52:02 +0000]
[PATCH] i2c-i801: Cleanups

i2c-i801: Cleanups

Various cleanups to the i2c-i801 driver:
* Fix documentation file and self file name references.
* i801_setup can be marked __devinit.
* Drop useless error local variable and label in i801_setup.
* Avoid a double PCI configuration register write in some cases.
* Use symbolic names for SMBHSTCFG bits.
* Transmit the error code returned by i801_setup instead of forcing it
  to an arbitrary value.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c-i801: Remove PCI function check
Jean Delvare [Mon, 12 Jun 2006 19:51:20 +0000]
[PATCH] i2c-i801: Remove PCI function check

i2c-i801: Remove PCI function check

Remove the PCI function number check when probing devices.
This check is redundant, each function has a separate PCI device
ID, so checking for that ID is sufficient.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c-i801: Remove force_addr parameter
Jean Delvare [Mon, 12 Jun 2006 19:50:11 +0000]
[PATCH] i2c-i801: Remove force_addr parameter

i2c-i801: Remove force_addr parameter

Remove the force_addr module parameter. It doesn't appear to ever
have been needed, and PCI resources shouldn't be arbitrarily
changed anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c-i801: Fix block transaction poll loops
Jean Delvare [Mon, 12 Jun 2006 19:49:36 +0000]
[PATCH] i2c-i801: Fix block transaction poll loops

i2c-i801: Fix block transaction poll loops

Two of the three poll loops have the poll and sleep swapped,
causing an extra sleep to occur after the polled condition is
fulfilled. In practice, this doubles the amount of sleep time for
every block transaction.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] scx200_acb: Documentation update
Jean Delvare [Mon, 12 Jun 2006 19:48:08 +0000]
[PATCH] scx200_acb: Documentation update

Documentation update for the scx200_acb driver. Hopefully this will
help future users.

References:

[lm-sensors] Support of i2c-nscacb (April, May 2005)
  http://lists.lm-sensors.org/pipermail/lm-sensors/2005-April/011756.html
  http://lists.lm-sensors.org/pipermail/lm-sensors/2005-May/012043.html

[lm-sensors] making a geode i2c slave driver (April 2006)
  http://lists.lm-sensors.org/pipermail/lm-sensors/2006-April/015998.html

Kernel bug #6445
  http://bugzilla.kernel.org/show_bug.cgi?id=6445

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] scx200_acb: Mark scx200_acb_probe __init
Jean Delvare [Mon, 12 Jun 2006 19:46:04 +0000]
[PATCH] scx200_acb: Mark scx200_acb_probe __init

In i2c bus driver scx200_acb, function scx200_acb_probe can be
tagged __init.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] scx200_acb: Use PCI I/O resource when appropriate
Jordan Crouse [Mon, 12 Jun 2006 19:44:28 +0000]
[PATCH] scx200_acb: Use PCI I/O resource when appropriate

On the CS5535 and CS5536, the I/O resource is allocated through PCI,
so use that instead of using the MSR backdoor.

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c: Mark block write buffers as const
Krzysztof Halasa [Mon, 12 Jun 2006 19:42:20 +0000]
[PATCH] i2c: Mark block write buffers as const

The attached patch marks i2c_smbus_write_block_data() and
i2c_smbus_write_i2c_block_data() buffers as const.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c-ocores: Minor cleanups
Peter Korsgaard [Mon, 12 Jun 2006 19:40:53 +0000]
[PATCH] i2c-ocores: Minor cleanups

Minor cleanup to the i2c-ocores driver.

Peter Korsgaard will maintain the i2c-ocores driver.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] abituguru: Fix fan detection
Hans de Goede [Sun, 4 Jun 2006 18:24:11 +0000]
[PATCH] abituguru: Fix fan detection

One of my testers had a problem where the driver only saw 2 of the 4 fan
sensors his uGuru has, this fixes this.
 -accept 0x40 (bit 6) being high as a valid fan sensor setting for all fans
  not just fan 1, I have a feeling this bit indicates whether or not a fan is
  actually connected .

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] abituguru: Review fixes
Hans de Goede [Sun, 4 Jun 2006 18:23:01 +0000]
[PATCH] abituguru: Review fixes

Fixes to the Abit uGuru driver as requested in review by Jean Delvare:
 - exactly calculate the sysfs_names array length using macro
 - use snprintf when generating names to double check that the sysfs_names
   array does not overflow.
 - use ARRAY_SIZE and / or defines to determine number of loops in for loops
   instead of using hardcoded values.
 - In abituguru_probe(), refactor the error path leaving a single call to kfree

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] abituguru: New hardware monitoring driver
Hans de Goede [Sun, 4 Jun 2006 18:22:24 +0000]
[PATCH] abituguru: New hardware monitoring driver

New hardware monitoring driver for the Abit uGuru

Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] w83792d: Add missing data access locks
Yuan Mu [Sun, 4 Jun 2006 18:18:45 +0000]
[PATCH] w83792d: Add missing data access locks

Add missing data lock in w83792d driver to avoid unexpected
data change.

Signed-off-by: Yuan Mu <ymu@winbond.com.tw>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] w83792d: Fix setting the PWM value
Yuan Mu [Sun, 4 Jun 2006 18:18:05 +0000]
[PATCH] w83792d: Fix setting the PWM value

W83792D use pwm register low 4 bits to store PWM/DC value, bit 7
is used to store fan PWM/DC mode. The store_pwm function did not
convert the pwm input correctly, so it may change the fan mode
when new value is set.

This fix the problem. Change the "index" value of pwm*_mode
and pwm* SENSOR_ATTR to simplify code.

Signed-off-by: Yuan Mu <ymu@winbond.com.tw>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] hwmon: Drop some maintainers entries
Jean Delvare [Sun, 4 Jun 2006 18:13:01 +0000]
[PATCH] hwmon: Drop some maintainers entries

I no more wish to be listed as the maintainer for the smsc47m1 and
w83l785ts drivers. I have no test device, and people will fallback
to me as the general hardware monitoring maintainer anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] hwmon: Fix a typo in the hdaps driver
Jean Delvare [Sun, 4 Jun 2006 18:10:55 +0000]
[PATCH] hwmon: Fix a typo in the hdaps driver

Fix a typo in the hdaps driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Robert Love <rml@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] hwmon: Sysfs interface documentation update, 2 of 2, take 2
Jean Delvare [Mon, 5 Jun 2006 18:31:20 +0000]
[PATCH] hwmon: Sysfs interface documentation update, 2 of 2, take 2

Reword and complete certain parts of the hwmon sysfs-interface
documentation file. Hopefully this will make things clearer for new
driver authors.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] hwmon: Sysfs interface documentation update, 1 of 2
Rudolf Marek [Sun, 4 Jun 2006 18:03:39 +0000]
[PATCH] hwmon: Sysfs interface documentation update, 1 of 2

This patch cleans up hwmon sysfs documentation file, plus introduces
the description of DC/PWM selection for fan speed control.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c: New bus driver for the OpenCores I2C controller
Peter Korsgaard [Sun, 4 Jun 2006 18:01:08 +0000]
[PATCH] i2c: New bus driver for the OpenCores I2C controller

The following patch adds support for the OpenCores I2C controller IP
core (See http://www.opencores.org/projects.cgi/web/i2c/overview).

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c: Suggest N for rare devices in Kconfig
Jean Delvare [Sun, 4 Jun 2006 17:59:57 +0000]
[PATCH] i2c: Suggest N for rare devices in Kconfig

Improve the Kconfig help text of the follwing i2c drivers:
* busses/i2c-pca-isa.c
* chips/pcf8574.c
* chips/pcf8591.c
These are hard to detect and building them into the kernel
results in long delays at boot.

March 2006, thread "I2C_PCA_ISA causes boot delays"
http://marc.theaimsgroup.com/?l=linux-kernel&m=114360399415744&w=2

April 2006, thread "i2c-related 1-minute hang during bootup"
http://marc.theaimsgroup.com/?l=linux-kernel&m=114640992330721&w=2

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] HWMON: Trim VID values to correct number of bits
Rudolf Marek [Tue, 25 Apr 2006 12:24:46 +0000]
[PATCH] HWMON: Trim VID values to correct number of bits

Following patch trims the VID value to correct number of bits
for each VRM.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] HWMON: Improve the help text for CONFIG_HWMON
Jean Delvare [Tue, 25 Apr 2006 12:23:01 +0000]
[PATCH] HWMON: Improve the help text for CONFIG_HWMON

Improve the help text for CONFIG_HWMON to let the users know how they
pick the right hardware monitoring driver(s) for their system.

Also fix a couple typos in the related documentation file and improve
some parts a bit.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] HWMON: lm83: Documentation update
Jean Delvare [Tue, 25 Apr 2006 12:22:14 +0000]
[PATCH] HWMON: lm83: Documentation update

One more motherboard confirmed to have an LM83 temperature sensor chip.
Thanks to Steven Hardy for reporting.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D
Charles Spirakis [Tue, 25 Apr 2006 12:21:03 +0000]
[PATCH] HWMON: w83791d: New hardware monitoring driver for the Winbond W83791D

Add support for the w83791d sensor chip. The w83791d hardware is
somewhere between the w83781d and the w83792d and this driver code
is derived from the code that supports those chips.

Signed-off-by: Charles Spirakis <bezaur@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] HWMON: hdaps: Update the list of supported systems
Jean Delvare [Tue, 25 Apr 2006 12:20:11 +0000]
[PATCH] HWMON: hdaps: Update the list of supported systems

Update the list of systems supported by the hdaps driver:
* Add the "ThinkPad Z60m" entry, reported by Arkadiusz Miskiewicz.
* Add the "ThinkPad H" entry, reported by Frank Gevaerts for some
  ThinkPad R52 models (1846AQG).
* Drop the "ThinkPad X41 Tablet" entry, which looks redundant to me.
And a comment update for good measure.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Arkadiusz Miskiewicz <arekm@maven.pl>
Cc: Frank Gevaerts <frank@gevaerts.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] I2C: i2c-nforce2: Add support for the nForce4 MCP51 and MCP55
Jean Delvare [Tue, 25 Apr 2006 12:18:16 +0000]
[PATCH] I2C: i2c-nforce2: Add support for the nForce4 MCP51 and MCP55

Add support for the new nForce4 MCP51 (also known as nForce 410 or
430) and nForce4 MCP55 to the i2c-nforce2 driver. Some code changes
were required because the base I/O address registers have changed in
these versions. Standard BARs are now being used, while the original
nForce2 chips used non-standard ones.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] I2C: i2c-piix4: Document the IBM problem more clearly
Jean Delvare [Tue, 25 Apr 2006 11:37:25 +0000]
[PATCH] I2C: i2c-piix4: Document the IBM problem more clearly

Properly document on which systems the i2c-piix4 SMBus driver will
refuse to load. Hopefully this will make it clearer for users, which
were often wondering why their destop or server systems were detected
as laptops.

Closes bug #6429.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] I2C: i2c-piix4: Fix typo in documentation
Jean Delvare [Tue, 25 Apr 2006 11:29:26 +0000]
[PATCH] I2C: i2c-piix4: Fix typo in documentation

Fix i2c-piix4 documentation typo.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] I2C: i2c-piix4: Remove the fix_hstcfg parameter
Rudolf Marek [Tue, 25 Apr 2006 11:06:41 +0000]
[PATCH] I2C: i2c-piix4: Remove the fix_hstcfg parameter

This patch removes the fix_hstcfg option from the driver and related
SMBus Interrupt Select register magic because now we know what are
valid values for this register. This patch updates the documentation
and adds new IRQ mode check so we are sure not to miss any new
"unusual" value.

The PCI quirk for users of fix_hstcfg was not developed because the
chipset lacks of subsystem ID registers and DMI is stated "To be
filled". Impact to existing systems is minimal because the problem
showed up on motherboards like 10 years back. On the other hand users
of newer Serverworks and HT1000 systems won't be misleaded by the
message suggesting to try the fix_hstcfg any more.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] I2C: m41t00: Add support for the ST M41T81 and M41T85
Mark A. Greer [Tue, 25 Apr 2006 11:04:54 +0000]
[PATCH] I2C: m41t00: Add support for the ST M41T81 and M41T85

This patch adds support for the ST m41t81 and m41t85 i2c rtc chips
to the existing m41t00 driver.

Since there is no way to reliably determine what type of rtc chip
is in use, the chip type is passed in via platform_data.  The i2c
address and square wave frequency are passed in via platform_data
as well.  To accommodate the use of platform_data, a new header
file include/linux/m41t00.h has been added.

The m41t81 and m41t85 chips halt the updating of their time registers
while they are being accessed.  They resume when a stop condition
exists on the i2c bus or when non-time related regs are accessed.
To make the best use of that facility and to make more efficient
use of the i2c bus, this patch replaces multiple i2c_smbus_xxx calls
with a single i2c_transfer call.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c: cleanup m41t00
Mark A. Greer [Fri, 31 Mar 2006 21:06:46 +0000]
[PATCH] i2c: cleanup m41t00

This patch does some cleanup to the m41t00 i2c/rtc driver including:
- use BCD2BIN/BIN2BCD instead of BCD_TO_BIN/BIN_TO_BCD
- use strlcpy instead of strncpy
- some whitespace cleanup

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] i2c-piix4: Add ATI IXP200/300/400 support
Rudolf Marek [Thu, 23 Mar 2006 15:48:09 +0000]
[PATCH] i2c-piix4: Add ATI IXP200/300/400 support

This patch adds the ATI IXP southbridges support to i2c-piix4,
as it turned out those chips are compatible with it.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] hwmon: Add sysfs interface for individual alarm files
Jean Delvare [Thu, 23 Mar 2006 15:46:47 +0000]
[PATCH] hwmon: Add sysfs interface for individual alarm files

Extend the sysfs interface of hardware monitoring chips, by adding
individual alarm and beep files. Contrary to the old aggregated "alarms"
and "beeps" files, individual files constitute a standard way to access
the status information, making it finally possible to implement a
chip-independant hardware monitoring chip access library (once all
drivers have been added this new interface, that is.)

If future drivers need more individual files, the interface will be
extended as needed at the same time these drivers are merged into the
kernel tree.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] f71805f: Resource needs not be global
Jean Delvare [Thu, 23 Mar 2006 15:40:23 +0000]
[PATCH] f71805f: Resource needs not be global

The F71805F I/O resource structure needs not be a global variable,
as the platform core allocs its own copy of it anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] smsc47m192: New hwmon driver for SMSC LPC47M192/997
Hartmut Rick [Thu, 23 Mar 2006 15:37:23 +0000]
[PATCH] smsc47m192: New hwmon driver for SMSC LPC47M192/997

New driver (smsc47m192) which supports voltage and temperature
measurement features of SMSC LPC47M192 and LPC47M997 chips.

Signed-off-by: Hartmut Rick <linux@rick.claranet.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] w83627ehf: Add alarms support
Jean Delvare [Thu, 23 Mar 2006 15:30:29 +0000]
[PATCH] w83627ehf: Add alarms support

Add alarms support for the W83627EHF/EHG hardware monitoring chip.

This is based on an earlier patch from Rudolf Marek.

Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] w83627ehf: Add voltage inputs support
Rudolf Marek [Thu, 23 Mar 2006 15:25:22 +0000]
[PATCH] w83627ehf: Add voltage inputs support

Add the voltage measuring support to W83627EHF. The code is based
on the patch provided by Yuan Mu from Winbond.

Signed-off-by: Yuan Mu <Ymu@winbond.com.tw>
Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] lm83: Add LM82 support
Jordan Crouse [Thu, 23 Mar 2006 15:19:49 +0000]
[PATCH] lm83: Add LM82 support

Add LM82 temperature sensor support (similar to the LM83,
but less featureful).

Signed-off-by: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years agoMerge git://oss.sgi.com:8090/xfs-2.6
Linus Torvalds [Thu, 22 Jun 2006 01:10:19 +0000]
Merge git://oss.sgi.com:8090/xfs-2.6

* git://oss.sgi.com:8090/xfs-2.6: (43 commits)
  [XFS] Remove files from the build that are now unused.
  [XFS] Fix a Makefile issue related to exports.o handling.
  [XFS] Remove version 1 directory code. Never functioned on Linux, just
  [XFS] Map EFSCORRUPTED to an actual error code, not just a made up one
  [XFS] Kill direct access to ->count in valusema(); all we ever use it for
  [XFS] Remove unneeded conditional code on NFS export interface related
  [XFS] Remove an incorrect use of unlikely() on a relatively likely code
  [XFS] Push some common code out of write path into core XFS code for
  [XFS] Remove unnecessary local from open_exec dmapi path.
  [XFS] Minor XFS documentation updates.
  [XFS] Fix broken const use inside local suffix_strtoul routine.
  [XFS] Fix nused counter.  It's currently getting set to -1 rather than
  [XFS] Fix mismerge of the fs_writable cleanup patch causing a freeze/thaw
  [XFS] Fix up debug code so that bulkstat wont generate thousands of
  [XFS] Remove unused parameter from di2xflags routine.
  [XFS] Cleanup a missed porting conversion, and freezing.
  [XFS] Resolve a namespace collision on remaining vtypes for FreeBSD
  [XFS] Resolve a namespace collision on vnode/vnodeops for FreeBSD porters.
  [XFS] Resolve a namespace collision on vfs/vfsops for FreeBSD porters.
  [XFS] statvfs component of directory/project quota support, code
  ...

13 years ago[PATCH] USB: only make /sys/class/usb show up when there is something in it
Greg Kroah-Hartman [Tue, 20 Jun 2006 22:14:07 +0000]
[PATCH] USB: only make /sys/class/usb show up when there is something in it

Now /sys/class/usb is dynamically created when we have something to put
in it, and removed when all devices go away.

Just trying to cut down on the clutter in sysfs...

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: convert usb class devices to real devices
Greg Kroah-Hartman [Tue, 20 Jun 2006 20:09:50 +0000]
[PATCH] USB: convert usb class devices to real devices

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: move usb_device_class class devices to be real devices
Greg Kroah-Hartman [Tue, 20 Jun 2006 06:59:31 +0000]
[PATCH] USB: move usb_device_class class devices to be real devices

This moves the usb class devices that control the usbfs nodes to show up
in the proper place in the larger device tree.

No userspace changes is needed, this is compatible due to the symlinks
generated by the driver core.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: make endpoints real struct devices
Greg Kroah-Hartman [Wed, 14 Jun 2006 19:14:34 +0000]
[PATCH] USB: make endpoints real struct devices

This will allow for us to give endpoints a major/minor to create a
"usbfs2-like" way to access endpoints directly from userspace in an
easier manner than the current usbfs provides us.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: make usb_create_ep_files take a struct device
Greg Kroah-Hartman [Wed, 14 Jun 2006 19:14:34 +0000]
[PATCH] USB: make usb_create_ep_files take a struct device

Instead of a kobject, will make things easier in the future (don't know
what I was thinking when I did this originally...)

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: move the endpoint specific sysfs code to it's own file
Greg Kroah-Hartman [Wed, 14 Jun 2006 19:14:34 +0000]
[PATCH] USB: move the endpoint specific sysfs code to it's own file

This makes it easier to modify in the future without touching anything else.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: move <linux/usb_input.h> to <linux/usb/input.h>
David Brownell [Tue, 13 Jun 2006 17:04:34 +0000]
[PATCH] USB: move <linux/usb_input.h> to <linux/usb/input.h>

Move <linux/usb_input.h> to <linux/usb/input.h> and remove some
redundant includes.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: move hardware-specific <linux/usb_*.h> to <linux/usb/*.h>
David Brownell [Tue, 13 Jun 2006 16:59:32 +0000]
[PATCH] USB: move hardware-specific <linux/usb_*.h> to <linux/usb/*.h>

This moves header files for controller-specific platform data
from <linux/usb_XXX.h> to <linux/usb/XXX.h> to start reducing
some clutter.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: move <linux/usb_cdc.h> to <linux/usb/cdc.h>
David Brownell [Tue, 13 Jun 2006 16:57:47 +0000]
[PATCH] USB: move <linux/usb_cdc.h> to <linux/usb/cdc.h>

This moves <linux/usb_cdc.h> to <linux/usb/cdc.h> to reduce some of the
clutter of usb header files.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: whitespace removal from usb/gadget/ether
David Brownell [Tue, 13 Jun 2006 16:54:40 +0000]
[PATCH] USB: whitespace removal from usb/gadget/ether

This removes extraneous whitespace from the Ethernet/RNDIS gadget driver.
It's all space-at-EOL, spaces-before-tabs, or tabs-then-spaces.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: unusual_devs entry for Nokia N80
Alan Stern [Tue, 13 Jun 2006 13:59:32 +0000]
[PATCH] USB: unusual_devs entry for Nokia N80

Here is a patch (as720) adding an unusual_devs entry for the Nokia N80
mobile phone.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usbserial: Fixes wrong return values.
Luiz Fernando N. Capitulino [Tue, 13 Jun 2006 01:46:20 +0000]
[PATCH] usbserial: Fixes wrong return values.

Some usbserial functions returns -EINVAL if the port doesn't exist or if
it's not opened. However, the right error code for such situations is
-ENODEV.

Signed-off-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usb gadget: update pxa2xx_udc.c driver to fully support IXP4xx platform
Milan Svoboda [Mon, 29 May 2006 10:34:00 +0000]
[PATCH] usb gadget: update pxa2xx_udc.c driver to fully support IXP4xx platform

This patch adds IXP465 into the list of known devices and
adds IXP425 and IXP465 to the list of devices that have cfr. This
is not described in the hardware documentation, but without
it driver won't work.

Workaround (#if 1) that seemed to get rid of lost
status irqs is disabled for IXP4XX as it caused freezes
during testing of control messages. No lost irqs are
visible on IXP4XX.

Driver survived tests running over night without any
visible problems.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usb gadget: fix compile errors
Milan Svoboda [Mon, 29 May 2006 10:34:00 +0000]
[PATCH] usb gadget: fix compile errors

This patch fixes compile errors when pxa2xx_udc is to be compiled
for ixp4xx platform.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usb gadget: allow drivers support speeds higher than full speed
Milan Svoboda [Mon, 29 May 2006 10:34:00 +0000]
[PATCH] usb gadget: allow drivers support speeds higher than full speed

This patch removes limitation which prevents use of drivers that support
speeds different that full speed.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: gadget-serial: do not save/restore IRQ flags in gs_close()
Franck Bui-Huu [Wed, 14 Jun 2006 08:47:18 +0000]
[PATCH] USB: gadget-serial: do not save/restore IRQ flags in gs_close()

As pointed out by David Brownell, we know that IRQs are never
blocked when calling gs_close function. So the save/restore
IRQ flags are pointless.

Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: gadget-serial: fix a deadlock when closing the serial device
Franck Bui-Huu [Wed, 14 Jun 2006 08:29:21 +0000]
[PATCH] USB: gadget-serial: fix a deadlock when closing the serial device

When closing the device, the driver acquires/release twice the
port lock before/after waiting for the data to be completely
sent. Therefore it will dead lock.

This patch fixes it and also uses the generic scheduler services
for waiting for an event.

Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB Serial: clean tty fields on failed device open
Frank Gevaerts [Wed, 14 Jun 2006 13:52:05 +0000]
[PATCH] USB Serial: clean tty fields on failed device open

If either the driver's open() method or try_module_get() fails, we need to
set 'tty->driver_data' and 'port->tty' to NULL in serial_open(), otherwise
we'll get an OOPS in usb_device_disconnect() when the device is disconnected.

Signed-off-by: Frank Gevaerts <frank.gevaerts@fks.be>
Acked-by: Luiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: trivial DEBUG message correction in gadget ether driver
Matt Reimer [Wed, 7 Jun 2006 18:46:13 +0000]
[PATCH] USB: trivial DEBUG message correction in gadget ether driver

Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: new driver for Cypress CY7C63xxx mirco controllers
Oliver Bock [Fri, 9 Jun 2006 22:42:19 +0000]
[PATCH] USB: new driver for Cypress CY7C63xxx mirco controllers

This is a new driver for the Cypress CY7C63xxx mirco controller series.
It currently supports the pre-programmed CYC63001A-PC by AK Modul-Bus
GmbH.  It's based on a kernel 2.4 driver (cyport) by Marcus Maul which I
ported to kernel 2.6 using sysfs. I intend to support more controllers
of this family (and more features) as soon as I get hold of the required
IDs etc. Please see the source code's header for more information.

Signed-off-by: Oliver Bock <o.bock@fh-wolfenbuettel.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: update usbmon.txt
Pete Zaitcev [Tue, 13 Jun 2006 03:09:39 +0000]
[PATCH] USB: update usbmon.txt

Fix up the documentation. Apparently, I left unedited copy-paste results
in examples. Also, Alan helped me to improve the most confusing parts.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: implement error event in usbmon
Pete Zaitcev [Sat, 10 Jun 2006 05:03:32 +0000]
[PATCH] USB: implement error event in usbmon

Implement the "error" event in usbmon.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: update usbmon, fix glued lines
Pete Zaitcev [Sat, 10 Jun 2006 03:10:10 +0000]
[PATCH] USB: update usbmon, fix glued lines

This update contains one bug fix: some lines can come out truncated,
because of the safety cutoff. This happened because I forgot to update
the size when status packets began to be printed.

The rest is:
 - Comments updates
 - Allow snooping with pkmap on x86_64, which is cache-coherent
 - Enlarge event buffers (certainly we can have a couple of pages)
 - Add event counter

First touch upon usbmon for 2.6.18.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: io_edgeport touch-up
Pete Zaitcev [Wed, 7 Jun 2006 01:18:33 +0000]
[PATCH] USB: io_edgeport touch-up

Al Borchers suggested to do this in his review of my previous patch.
I guess that I skipped this initially because of my visceral dislike
of sizeof(data). But in this case it seems well localized.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] airprime.c: add Kyocera Wireless KPC650/Passport support
Timothy Sipples [Fri, 16 Jun 2006 11:42:59 +0000]
[PATCH] airprime.c: add Kyocera Wireless KPC650/Passport support

Adds vendor & product IDs to drivers/usb/serial/airprime.c for Kyocera
Wireless KPC650/Passport EV-DO/1xRTT PC Cards.

Signed-off-by: Timothy Sipples <Timothy.Sipples@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] UHCI: Improve FSBR-off timing
Alan Stern [Mon, 5 Jun 2006 16:28:57 +0000]
[PATCH] UHCI: Improve FSBR-off timing

This patch (as707) improves the FSBR operation in uhci-hcd by turning it
off more quickly when it isn't needed.  FSBR puts a noticeable load on a
computer's PCI bus, so it should be disabled as soon as possible when it
isn't in use.  The patch leaves it running for only 10 ms after the last
URB stops using it, on the theory that this should be long enough for a
driver to submit another URB if it wants keep FSBR going.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] UHCI: remove hc_inaccessible flag
Alan Stern [Mon, 5 Jun 2006 16:21:30 +0000]
[PATCH] UHCI: remove hc_inaccessible flag

This patch (as706) removes the private hc_inaccessible flag from
uhci-hcd.  It's not needed because it conveys exactly the same
information as the generic HCD_FLAG_HW_ACCESSIBLE bit.

In its place goes a new flag recording whether the controller is dead.
The new code allows a complete device reset to resurrect a dead
controller (although usbcore doesn't yet implement such a facility).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] UHCI: various updates
David Brownell [Mon, 5 Jun 2006 16:16:39 +0000]
[PATCH] UHCI: various updates

This patch (as705) contains a small set of updates for uhci-hcd written
mostly by Dave Brownell:

  * Root hub suspend messages come out labeled as root hub messages;
    PCI messages should only come out when the pci device suspends.

  * Rename the reset() method to better match its init() role

  * Behave more like the other HCDs by returning -ESHUTDOWN for root-hub
    suspend/resume errors.

  * When an URB fails, associate the message with the usb device not
    the host controller (it still hides endpoint and direction)

From: David Brownell <david-b@pacbell.net>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usb-storage: unusual_devs entry for Nikon DSC D70s
Alan Stern [Tue, 6 Jun 2006 19:19:17 +0000]
[PATCH] usb-storage: unusual_devs entry for Nikon DSC D70s

This patch (as704) adds an unusual_devs entry for the Nikon DSC D70s,
which uses a different Product ID from the D70.  It also moves the entry
for the DSC E2000 up in the list, to preserve the numerical ordering.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: Add Apple MacBook product IDs to usbhid
Rene Rebe [Sun, 4 Jun 2006 09:39:09 +0000]
[PATCH] USB: Add Apple MacBook product IDs to usbhid

This adds the Apple MacBook product IDs for the Fn translation
to the usbhid.

Signed-off-by: Rene Rebe <rene@exactcode.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: EHCI on non-Au1200 build fix
Ralf Baechle [Sat, 3 Jun 2006 22:58:55 +0000]
[PATCH] USB: EHCI on non-Au1200 build fix

Including ehci-au1xxx.c on a non-Au1200 Alchemy only to have it throw
an error is stupid.

From: Ralf Baechle <ralf@linux-mips.org>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: free allocated memory on io_edgeport startup memory failure
Chris Lund [Sat, 3 Jun 2006 20:58:19 +0000]
[PATCH] USB: free allocated memory on io_edgeport startup memory failure

While an Edgeport is allocating individual port structures, if kmalloc
returns NULL, the serial structure is freed and -ENOMEM, but the ports
allocated before the failure are not freed.  This patch addresses that
condition.

Signed-off-by: Christopher Lund <docmax@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: new devices for the Option driver
Matthias Urlichs [Fri, 2 Jun 2006 09:48:56 +0000]
[PATCH] USB: new devices for the Option driver

This patch extends the "option" driver with a few more devices, some of
which are actually connected to USB the "right" way -- as opposed to
doing it via PCMCIA and OHCI.

Signed-Off-By: Matthias Urlichs <smurf@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usb: drivers/usb/core/devio.c dereferences a userspace pointer
Philippe Retornaz [Fri, 2 Jun 2006 03:48:46 +0000]
[PATCH] usb: drivers/usb/core/devio.c dereferences a userspace pointer

See http://bugzilla.kernel.org/show_bug.cgi?id=6617.

This function dereference a __user pointer.

Signed-off-by: Philippe Retornaz <couriousous@mandriva.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usbcore: recovery from Set-Configuration failure
Alan Stern [Thu, 1 Jun 2006 17:59:16 +0000]
[PATCH] usbcore: recovery from Set-Configuration failure

This patch (as703) improves the error handling when a Set-Configuration
request fails.  The old interfaces are all unregistered before the
request is sent, and if the request fails then we don't know what config
the device is using.  So it makes no sense to leave actconfig pointing
to the old configuration with its invalid interfaces.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usbhid: use usb_reset_composite_device
Alan Stern [Thu, 1 Jun 2006 17:55:28 +0000]
[PATCH] usbhid: use usb_reset_composite_device

This patch (as702) makes usbhid use the new usb_reset_composite_device
API.  Now HID interfaces can coexist with other interfaces on the same
device, and a reset can safely be requested by any of the drivers.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usb-storage: use usb_reset_composite_device
Alan Stern [Thu, 1 Jun 2006 17:52:56 +0000]
[PATCH] usb-storage: use usb_reset_composite_device

This patch (as701) modifies usb-storage to take advantage of the new
usb_reset_composite_device() API.  Now we will be able to safely request
port resets even if other drivers are bound to a mass-storage device.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB hub: use usb_reset_composite_device
Alan Stern [Thu, 1 Jun 2006 17:37:24 +0000]
[PATCH] USB hub: use usb_reset_composite_device

This patch (as700) modifies the hub driver to take advantage of the new
usb_reset_composite_device API.  The existing code had special-case
calls stuck into usb_reset_device, just before and after the reset.
With the new version there's no need for special-case stuff; it all
happens naturally in the form of pre_reset and post_reset notifications.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usbcore: port reset for composite devices
Alan Stern [Thu, 1 Jun 2006 17:33:42 +0000]
[PATCH] usbcore: port reset for composite devices

This patch (as699) adds usb_reset_composite_device(), a routine for
sending a USB port reset to a device with multiple interfaces owned by
different drivers.  Drivers are notified about impending and completed
resets through two new methods in the usb_driver structure.

The patch modifieds the usbfs ioctl code to make it use the new routine
instead of usb_reset_device().  Follow-up patches will modify the hub,
usb-storage, and usbhid drivers so they can utilize this new API.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: cdc_ether: recognize olympus r1000 (fix regression)
David Brownell [Wed, 31 May 2006 03:49:29 +0000]
[PATCH] USB: cdc_ether: recognize olympus r1000 (fix regression)

Earlier work splitting the "usbnet" driver out into a core plus driver
modules was missing a blacklist entry for the Olympus R-1000; it must
not use the CDC Ethernet driver, only the "zaurus" support works with
it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: negative index in drivers/usb/host/isp116x-hcd.c
Eric Sesterhenn [Fri, 2 Jun 2006 03:48:45 +0000]
[PATCH] USB: negative index in drivers/usb/host/isp116x-hcd.c

From: Eric Sesterhenn <snakebyte@gmx.de>

This fixes coverity Bug #390.

With the following code

ret = ep->branch = balance(isp116x, ep->period, ep->load);
if (ret < 0)
goto fail;

the problem is that ret and balance are of the type int, and ep->branch is u16.
so the int balance() returns gets reduced to u16 and then converted to an int again,
which removes the sign. Maybe the following little c program can explain it better:

13 years ago[PATCH] USB: Add Sierra Wireless MC5720 ID to airprime.c
Jeremy Fitzhardinge [Wed, 31 May 2006 18:21:52 +0000]
[PATCH] USB: Add Sierra Wireless MC5720 ID to airprime.c

Recognize the Sierra Wireless MC5720.

Signed-off-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: Whiteheat: fix firmware spurious errors
Stuart MacDonald [Wed, 31 May 2006 17:28:40 +0000]
[PATCH] USB: Whiteheat: fix firmware spurious errors

Attached patch fixes spurious errors during firmware load.

Signed-off-by: Stuart MacDonald <stuartm@connecttech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] Driver for Apple Cinema Display
akpm@osdl.org [Fri, 26 May 2006 20:17:09 +0000]
[PATCH] Driver for Apple Cinema Display

This is a driver to control the brightness of an Apple Cinema Display over
USB.  It updates the local brightness value if the user presses a button on
the display.

Signed-off-by: Michael Hanselmann <linux-kernel@hansmi.ch>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: ftdi_sio: add support for Yost Engineering ServoCenter3.1
Ian Abbott [Tue, 30 May 2006 11:36:30 +0000]
[PATCH] USB: ftdi_sio: add support for Yost Engineering ServoCenter3.1

This patch adds support for Yost Engineering Inc's ServoCenter 3.1 USB
product to the ftdi_sio driver's device ID table.  The PID was supplied
by Aaron Prose of Yost Engineering on the ftdi-usb-sio-devel list.  The
PID 0xE050 matches the Windows INF files for this device.

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usbhid: Remove unneeded blacklist entries
Alan Stern [Tue, 30 May 2006 14:21:14 +0000]
[PATCH] usbhid: Remove unneeded blacklist entries

Now that usbhid automatically applies HID_QUIRK_NOGET to keyboards and
mice, we no longer need the blacklist entries that were present for no
other purpose.  This patch (as698) removes them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Vojtech Pavlik <vojtech@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usbcore: Fix broken RNDIS config selection
Giridhar Pemmasani [Tue, 30 May 2006 14:12:30 +0000]
[PATCH] usbcore: Fix broken RNDIS config selection

RNDIS devices don't get configured owing to a typo in
choose_configuration().  This patch from Giridhar Pemmasani fixes the
typo.

From: Giridhar Pemmasani <giri@lmc.cs.sunysb.edu>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: print message when device is rejected due to insufficient power
Daniel Drake [Fri, 26 May 2006 20:36:28 +0000]
[PATCH] USB: print message when device is rejected due to insufficient power

2.6.16 introduces USB power budgeting in the Linux kernel, and since then, a
fair number of users have observed that some of their devices no longer work in
unpowered hubs (this is not a bug, the devices claim that they need more than
100mA).

The very least we can do is print an informational message to the kernel log
when this happens, otherwise it is not at all clear why the device was not
accepted.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: more pegasus log spamming removed
David Brownell [Fri, 26 May 2006 17:17:03 +0000]
[PATCH] USB: more pegasus log spamming removed

Remove more log spamming from pegasus:  stop talking to the device once we
see ENODEV reported.  It may take a while before khubd notifies us.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] ub: random cleanups
Pete Zaitcev [Fri, 26 May 2006 03:08:50 +0000]
[PATCH] ub: random cleanups

Remove some silly messages and cast in stone "temporary" messages which
we keep around. Also, I am hesitant to remove the initialization retries
without having the hardware to test (anyone who was at KS04 has a spare?)

Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] ub: atomic add_disk
Pete Zaitcev [Fri, 26 May 2006 03:04:54 +0000]
[PATCH] ub: atomic add_disk

<zaitcev> I am taling about this: "if (disk->flags & GENHD_FL_UP) del_gendisk(disk);"
<zaitcev> If del_gendisk() undoes add_disk() like viro just said, why is it conditional?
<viro> huh?
<viro> add_disk() sets the damn flag
<zaitcev> So, I should not need to check ever
<viro> so the above is "if I've called add_disk(), call gendisk()"
<viro> which might be what you want, of course
<viro> but usually you know if you'd done add_disk() on that puppy anyway

In ub, nobody upstream should ever see half-constructed disks before
they were passed to add_disk. To that end, only add the struct lun to
the list on the path of no return. With that fix in place, we do
not need to test GENHD_FL_UP.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: rmmod pl2303 after -28
Pete Zaitcev [Wed, 24 May 2006 18:04:04 +0000]
[PATCH] USB: rmmod pl2303 after -28

Wait for the scheduled work to finish before freeing memory, prevent oops.
http://bugzilla.kernel.org/show_bug.cgi?id=6596

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] improved TT scheduling for EHCI
Dan Streetman [Wed, 24 May 2006 16:39:16 +0000]
[PATCH] improved TT scheduling for EHCI

This updates the EHCI driver by adding an improved scheduler for the
transaction translators, found in USB 2.0 hubs and used for low and
full speed devices.

 - adds periodic_tt_usecs() and some helper functions, which does
   the same thing that "periodic_usecs" does, except on the other
   side of the TT, i.e.  it calculates the low/fullspeed bandwidth
   usage instead of highspeed.

 - adds a tt_available() function which is the new implementation
   of what tt_no_collision() does ... while tt_no_collision() ensures
   that each TT handles only 1 periodic transfer at a time (a very
   pessimistic approach) this version instead tracks bandwidth and
   allows each TT to handle as many transfers as will fit on each TT's
   downstream bus (closer to best-case).

The new scheduler is selected by a config option, marked as EXPERIMENTAL
so it can be tested (and more broadly reviewed) for a while until it
seems safe to remove the original scheduler.

Signed-off-by: Dan Streetman <ddstreet@ieee.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] usb-storage: get rid of the timer during URB submission
Franck Bui-Huu [Wed, 24 May 2006 14:57:28 +0000]
[PATCH] usb-storage: get rid of the timer during URB submission

This patch uses completion timeout instead of a timer to implement
a timeout when submitting an URB.

It also put the task in interruptible state instead of an
uninterruptible one while waiting for the completion.

Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: Syntax cleanup for pl2303 (trailing backslash)
Pete Zaitcev [Tue, 23 May 2006 05:05:17 +0000]
[PATCH] USB: Syntax cleanup for pl2303 (trailing backslash)

Remove the silly trailing backslash.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: Improve Kconfig comment for mct_u232
Pete Zaitcev [Tue, 23 May 2006 05:02:32 +0000]
[PATCH] USB: Improve Kconfig comment for mct_u232

Add a couple of supported devices into the help message.

It's a long story... I promised this comment changed to a user long ago,
so I'd like to have that promise kept. In reality though, nobody is
likely to read this anyway.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB serial: encapsulate schedule_work, remove double-calling
Pete Zaitcev [Tue, 23 May 2006 04:58:49 +0000]
[PATCH] USB serial: encapsulate schedule_work, remove double-calling

I'm going to throw schedule_work away, it's retarded. But for starters,
let's have it encapsulated.

Also, generic and whiteheat were both calling usb_serial_port_softint
and scheduled work. Only one was necessary.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>