7 years agoprintk: do not handle non-sleepable notification in console_cpu_notify
mhban [Wed, 8 Jun 2011 09:13:15 +0000]
printk: do not handle non-sleepable notification in console_cpu_notify

- CPU_DYING should not be handled in sleepable context

Signed-off-by: Minho Ban <mhban@samsung.com>

7 years agonet: wireless: Add CONFIG_WIFI_CONTROL_FUNC option
Dmitry Shmidt [Wed, 8 Jun 2011 22:16:52 +0000]
net: wireless: Add CONFIG_WIFI_CONTROL_FUNC option

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Switch to CUSTOMER_HW2
Dmitry Shmidt [Wed, 8 Jun 2011 22:15:31 +0000]
net: wireless: bcmdhd: Switch to CUSTOMER_HW2

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Remove obsolete debug messages
Dmitry Shmidt [Wed, 8 Jun 2011 22:14:25 +0000]
net: wireless: bcmdhd: Remove obsolete debug messages

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Allow error debug prints from the beginning
Dmitry Shmidt [Wed, 8 Jun 2011 22:13:38 +0000]
net: wireless: bcmdhd: Allow error debug prints from the beginning

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Update example locale table
Dmitry ORNATSKYY [Wed, 18 May 2011 20:58:44 +0000]
net: wireless: bcm4329: Update example locale table

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Reduce listen interval to 10 (from 20)
Dmitry ORNATSKYY [Wed, 11 May 2011 16:44:21 +0000]
net: wireless: bcm4329: Reduce listen interval to 10 (from 20)

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Add new and default wifi locale support
Dmitry Shmidt [Tue, 10 May 2011 23:29:51 +0000]
net: wireless: bcm4329: Add new and default wifi locale support

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix watchdog firing in softirq on removal
Dmitry Shmidt [Thu, 2 Jun 2011 23:08:37 +0000]
net: wireless: bcmdhd: Fix watchdog firing in softirq on removal

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Allow WEXT support
Dmitry Shmidt [Wed, 1 Jun 2011 23:22:21 +0000]
net: wireless: bcmdhd: Allow WEXT support

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix params in wl_cfg80211_event call
Dmitry Shmidt [Wed, 1 Jun 2011 23:20:54 +0000]
net: wireless: bcmdhd: Fix params in wl_cfg80211_event call

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add spinlock initialization
Dmitry Shmidt [Wed, 1 Jun 2011 22:22:10 +0000]
net: wireless: bcmdhd: Add spinlock initialization

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix config FW and NVRAM path
Dmitry Shmidt [Wed, 1 Jun 2011 22:17:48 +0000]
net: wireless: bcmdhd: Fix config FW and NVRAM path

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agoUpdate to
Howard M. Harte [Fri, 27 May 2011 23:07:36 +0000]
Update to

    * Add support for SoftAP, keepalive, ARP offload.
    * Clean up cfg80211 and p2p code.
    * Update Makefile to support new features.
Change-Id: I1e7a16acd400d7baf5625ca8ba6552a6f1c80661
Signed-off-by: Howard M. Harte <hharte@broadcom.com>

7 years agonet: wireless: bcmdhd: Initial version based on
Dmitry Shmidt [Tue, 24 May 2011 18:14:33 +0000]
net: wireless: bcmdhd: Initial version based on

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agoARM: etm: Power down etm(s) when tracing is not enabled
Arve Hjønnevåg [Thu, 24 Feb 2011 00:51:58 +0000]
ARM: etm: Power down etm(s) when tracing is not enabled

Without this change a saw an 18% increase in idle power consumption
on one deivce when trace support is compiled into the kernel. Now
I see the same increase only when tracing.

Change-Id: I21bb5ecf1b7d29ce3790ceeb5323409cc22d5a3b
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: etm: Support multiple ETMs/PTMs.
Arve Hjønnevåg [Sat, 5 Feb 2011 06:38:14 +0000]
ARM: etm: Support multiple ETMs/PTMs.

If more than one ETM or PTM are present, configure all of them
and enable the formatter in the ETB. This allows tracing on dual
core systems (e.g. omap4).

Change-Id: I028657d5cf2bee1b23f193d4387b607953b35888
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: etm: Return the entire trace buffer if it is empty after reset
Arve Hjønnevåg [Sat, 5 Feb 2011 06:38:14 +0000]
ARM: etm: Return the entire trace buffer if it is empty after reset

On some SOCs the read and write pointer are reset when the chip
resets, but the trace buffer content is preserved. If the status
bits indicates that the buffer is empty and we have never started
tracing, assume the buffer is full instead. This can be useful
if the system rebooted from a watchdog reset.

Change-Id: Iaf21c2c329c6059004ee1d38e3dfff66d7d28029
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: etm: Add some missing locks and error checks
Arve Hjønnevåg [Tue, 15 Feb 2011 05:09:51 +0000]
ARM: etm: Add some missing locks and error checks

It is not safe to call etm_lock or etb_lock without holding the
mutex since another thread may also have unlocked the registers.

Also add some missing checks for valid etb_regs in the etm sysfs

Change-Id: I939f76a6ea7546a8fc0d4ddafa2fd2b6f38103bb
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: etm: Configure data tracing
Arve Hjønnevåg [Tue, 1 Feb 2011 02:33:55 +0000]
ARM: etm: Configure data tracing

The old code enabled data tracing, but did not configure the
range. We now configure it to trace all data addresses by default,
and add a trace_data_range attribute to change the range or disable
data tracing.

Change-Id: I9d04e3e1ea0d0b4d4d5bcb93b1b042938ad738b2
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: etm: Allow range selection
Arve Hjønnevåg [Sat, 29 Jan 2011 07:44:43 +0000]
ARM: etm: Allow range selection

Trace kernel text segment by default as before, allow tracing of other
ranges by writing a range to /sys/devices/etm/trace_range, or to trace
everything by writing 0 0.

Change-Id: Ibb734ca820fedf79560b20536247f1e1700cdc71
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: etm: Don't try to clear the buffer full status after reading the buffer
Arve Hjønnevåg [Tue, 1 Feb 2011 05:34:47 +0000]
ARM: etm: Don't try to clear the buffer full status after reading the buffer

If the write address was at the end of the buffer, toggling the trace
capture bit would set the RAM-full status instead of clearing it, and
if any of the stop bits in the formatter is set toggling the trace
capture bit may not do anything.

Instead use the read position to find out if the data has already
been returned.

This also fixes the read function so it works when the trace buffer is
larger than the buffer passed in from user space. The old version
would reset the trace buffer pointers after every read, so the second
call to read would always return 0.

Change-Id: I75256abe2556adfd66fd5963e46f9e84ae4645e1
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: etm: Don't limit tracing to only non-secure code.
Arve Hjønnevåg [Sat, 29 Jan 2011 07:33:11 +0000]
ARM: etm: Don't limit tracing to only non-secure code.

On some systems kernel code is considered secure, and this code
already limits tracing to the kernel text segment which results
in no trace data.

Change-Id: I098a0753e874859446d098e1ee209f67fc13cd5d
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: etm: Don't require clock control
Arve Hjønnevåg [Sat, 29 Jan 2011 07:12:32 +0000]
ARM: etm: Don't require clock control

If clk_get fail, assume the etb does not need a separate clock.

Change-Id: Ia0bf3f5391e94a60ea45876aa7afc8a88a7ec3bf
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoBluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections.
Nick Pelly [Thu, 11 Feb 2010 19:54:28 +0000]
Bluetooth: Allow SCO/eSCO packet type selection for outgoing SCO connections.

__u16 sco_pkt_type is introduced to struct sockaddr_sco. It allows bitwise
selection of SCO/eSCO packet types. Currently those bits are:

0x0001 HV1 may be used.
0x0002 HV2 may be used.
0x0004 HV3 may be used.
0x0008 EV3 may be used.
0x0010 EV4 may be used.
0x0020 EV5 may be used.
0x0040 2-EV3 may be used.
0x0080 3-EV3 may be used.
0x0100 2-EV5 may be used.
0x0200 3-EV5 may be used.

This is similar to the Packet Type parameter in the HCI Setup Synchronous
Connection Command, except that we are not reversing the logic on the EDR bits.
This makes the use of sco_pkt_tpye forward portable for the use case of
white-listing packet types, which we expect will be the primary use case.

If sco_pkt_type is zero, or userspace uses the old struct sockaddr_sco,
then the default behavior is to allow all packet types.

Packet type selection is just a request made to the Bluetooth chipset, and
it is up to the link manager on the chipset to negiotiate and decide on the
actual packet types used. Furthermore, when a SCO/eSCO connection is eventually
made there is no way for the host stack to determine which packet type was used
(however it is possible to get the link type of SCO or eSCO).

sco_pkt_type is ignored for incoming SCO connections. It is possible
to add this in the future as a parameter to the Accept Synchronous Connection
Command, however its a little trickier because the kernel does not
currently preserve sockaddr_sco data between userspace calls to accept().

The most common use for sco_pkt_type will be to white-list only SCO packets,
which can be done with the hci.h constant SCO_ESCO_MASK.

This patch is motivated by broken Bluetooth carkits such as the Motorolo
HF850 (it claims to support eSCO, but will actually reject eSCO connections
after 5 seconds) and the 2007/2008 Infiniti G35/37 (fails to route audio
if a 2-EV5 packet type is negiotiated). With this patch userspace can maintain
a list of compatible packet types to workaround remote devices such as these.

Based on a patch by Marcel Holtmann.

Rebased to 2.6.39.

Change-Id: Ide1c89574fa4f6f1b9218282e1af17051eb86315
Signed-off-by: Nick Pelly <npelly@google.com>

7 years agoARM: Add 'card_present' state to mmc_platfrom_data
Dmitry Shmidt [Tue, 3 May 2011 18:05:04 +0000]
ARM: Add 'card_present' state to mmc_platfrom_data

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Fix one more 2.6.39 compilation error
Colin Cross [Tue, 3 May 2011 01:06:41 +0000]
net: wireless: bcm4329: Fix one more 2.6.39 compilation error

Change-Id: Ia290e056a177d0e6f84a3cf9e806307b43de5e1b
Signed-off-by: Colin Cross <ccross@android.com>

7 years agonet: Fix "Support nuking IPv6 sockets as well as IPv4" for 2.6.39
Colin Cross [Tue, 3 May 2011 00:23:45 +0000]
net: Fix "Support nuking IPv6 sockets as well as IPv4" for 2.6.39

Change-Id: I247b8dc2e32bb83e731209928600e92892dd042c
Signed-off-by: Colin Cross <ccross@android.com>

7 years agoRecreate asm/mach/mmc.h include file
Colin Cross [Sat, 9 Apr 2011 05:20:53 +0000]
Recreate asm/mach/mmc.h include file

Change-Id: I9f10244b0603f7842b8504a16124d40dc4a71ed2
Signed-off-by: Colin Cross <ccross@android.com>

7 years agoinput: misc: gpio_matrix: Fix irq call for 2.6.39
Colin Cross [Sat, 9 Apr 2011 02:18:42 +0000]
input: misc: gpio_matrix: Fix irq call for 2.6.39

Change-Id: Ib8dd0ab6554e6b0e3798bf75d41f77ea0b20b8de
Signed-off-by: Colin Cross <ccross@android.com>

7 years agoARM: common: fiq_debugger: Fix build for 2.6.39 irq changes
Colin Cross [Sat, 9 Apr 2011 00:26:06 +0000]
ARM: common: fiq_debugger: Fix build for 2.6.39 irq changes

Signed-off-by: Colin Cross <ccross@android.com>
Change-Id: I68147c0a17f9cd1b7693826754edc55b1bb09592

7 years agonet: wireless: bcm4329: Fix 2.6.39 compilation
Dmitry Shmidt [Mon, 2 May 2011 21:52:15 +0000]
net: wireless: bcm4329: Fix 2.6.39 compilation

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Prevent working thread to run during suspend path
Dmitry Shmidt [Tue, 26 Apr 2011 18:36:07 +0000]
net: wireless: bcm4329: Prevent working thread to run during suspend path

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Clean ARP offload table on IP update
Greg Goldman [Wed, 20 Apr 2011 18:23:06 +0000]
net: wireless: bcm4329: Clean ARP offload table on IP update

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: Reorder incoming packets in PPPoLAC and PPPoPNS.
Chia-chi Yeh [Fri, 15 Apr 2011 22:22:09 +0000]
net: Reorder incoming packets in PPPoLAC and PPPoPNS.

PPP handles packet loss but does not work with out of order packets.
This change performs reordering of incoming data packets within a
sliding window of one second. Since sequence number is optional,
receiving a packet without it will drop all queued packets.

Currently the logic is triggered by incoming packets, so queued
packets have to wait till another packet is arrived. It is done for
simplicity since no additional locks or threads are required. For
reliable protocols, a retransmission will kick it. For unreliable
protocols, queued packets just seem like packet loss. Time-critical
protocols might be broken, but they never work with queueing anyway.

Signed-off-by: Chia-chi Yeh <chiachi@android.com>

7 years agonet: Support nuking IPv6 sockets as well as IPv4.
Lorenzo Colitti [Fri, 11 Mar 2011 04:24:12 +0000]
net: Support nuking IPv6 sockets as well as IPv4.

On Linux, when an interface goes down all its IPv6
addresses are deleted, so relying on knowing the previous
IPv6 addresses on the interface is brittle. Instead,
support nuking all sockets that are bound to IP addresses
that are not configured and up on the system. This
behaviour is triggered by specifying the unspecified
address (:: or If an IP address is specified, the
behaviour is unchanged, except the ioctl now supports IPv6
as well as IPv4.

Signed-off-by: Lorenzo Colitti <lorenzo@google.com>

7 years agonet: wireless: bcm4329: Allocate skb with GFP_KERNEL flag if possible
Dmitry Shmidt [Thu, 10 Mar 2011 18:18:39 +0000]
net: wireless: bcm4329: Allocate skb with GFP_KERNEL flag if possible

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Disable wake irq at driver stop
Dmitry Shmidt [Thu, 10 Mar 2011 00:52:08 +0000]
net: wireless: bcm4329: Disable wake irq at driver stop

Previously at driver stop interrupts were not disabled and
might cause never-ending waking up

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agoUSB: gadget: f_mtp: dequeue request on error in mtp_read
Mike Lockwood [Sat, 19 Feb 2011 20:33:17 +0000]
USB: gadget: f_mtp: dequeue request on error in mtp_read

In mtp_read(), if wait_event_interruptible() returns an error, we need to
remove the request from the EP queue.  Else, on the next call to mtp_read(), we
will attempt to enqueue the request again, potentially corrupting the
queue.  This is what happens with musb_gadget_queue(), which does not check for
duplicate requests.

Based on a similar change to f_adb.c

Signed-off-by: Mike Lockwood <lockwood@android.com>

7 years agoUSB: gadget: android: Fix problem switching vendor IDs
Mike Lockwood [Mon, 14 Feb 2011 18:32:05 +0000]
USB: gadget: android: Fix problem switching vendor IDs

We need to update the vendor ID in the composite driver as well

Signed-off-by: Mike Lockwood <lockwood@android.com>

7 years agonet: wireless: bcm4329: Fix disable pno call
Greg Goldman [Sat, 19 Feb 2011 01:12:19 +0000]
net: wireless: bcm4329: Fix disable pno call

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Get country translation from platform data
Dmitry Shmidt [Tue, 15 Feb 2011 01:48:56 +0000]
net: wireless: bcm4329: Get country translation from platform data

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: Add get_country_code functionality to platform
Dmitry Shmidt [Tue, 15 Feb 2011 00:58:48 +0000]
net: wireless: Add get_country_code functionality to platform

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Update to version 4.218.248-23
Greg Goldman [Mon, 14 Feb 2011 23:54:42 +0000]
net: wireless: bcm4329: Update to version 4.218.248-23

- Add support to PNO with adaptive scan time
- Remove logic to generate Link Down based on Roaming Event
- Improve sco/esco detection method for BT COEX
- Add new function TXPOWER to reduce power if needed

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Fix mem leak in wl_iw_handle_scanresults_ies
Mike Corrigan [Sat, 12 Feb 2011 01:05:54 +0000]
net: wireless: bcm4329: Fix mem leak in wl_iw_handle_scanresults_ies

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Fix memleak in dev->p
Andrei Warkentin [Sat, 12 Feb 2011 01:01:28 +0000]
net: wireless: bcm4329: Fix memleak in dev->p

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Add sdlock to firmware loading
Dmitry Shmidt [Sat, 12 Feb 2011 00:54:39 +0000]
net: wireless: bcm4329: Add sdlock to firmware loading

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agoPM: Increase dpm suspend timeout
Benoit Goby [Mon, 7 Feb 2011 21:55:26 +0000]
PM: Increase dpm suspend timeout

usbhid devices have a 10s timeout waiting for the out queue to clear.
Increased the watchdog to 12s.

Change-Id: I96368fca6dff98e4eba8aedb09c23be964c8f4b4
Signed-off-by: Benoit Goby <benoit@android.com>

7 years agoUSB: gadget: f_mtp: Don't block in mtp_send_event
Mike Lockwood [Thu, 10 Feb 2011 16:54:53 +0000]
USB: gadget: f_mtp: Don't block in mtp_send_event

We used to wait for the previous interrupt packet to complete before sending
the next packet.  But unfortunately the previous packet will not complete
until USB is disconnected if the host is not listening on the interrupt
endpoint (which is the case with libmtp on Linux and Mac).
To avoid hanging indefinitely in this case, we now simply return -EBUSY
if the previous interrupt packet has not completed yet.

Signed-off-by: Mike Lockwood <lockwood@android.com>

7 years agoUSB: gadget: android: Support switching vendor ID when configuration changes
Mike Lockwood [Wed, 9 Feb 2011 14:38:26 +0000]
USB: gadget: android: Support switching vendor ID when configuration changes

Based on the list of enabled USB functions, we can now switch the vendor ID
as well as the product ID.

Signed-off-by: Mike Lockwood <lockwood@android.com>

7 years agoRevert "mmc: subtract boot sectors from disk size for eMMC 4.3+ devices"
Colin Cross [Sat, 12 Feb 2011 21:21:32 +0000]
Revert "mmc: subtract boot sectors from disk size for eMMC 4.3+ devices"

This reverts commit f0b0e4bec1e89014f3dcef4da8bcf95428cc771c.

The reverted commit incorrectly calculates the size of eMMC
devices in some (all?) cases.

This revert may cause problems in cases where the bootloader was
bug-compatible and puts a GPT partition at the incorrect end of
the eMMC device.

Signed-off-by: Colin Cross <ccross@android.com>

7 years agopower: wakelock: use get_xtime_and_monotonic_and_sleep_offset in get_expired_time
Colin Cross [Wed, 30 Mar 2011 19:37:49 +0000]
power: wakelock: use get_xtime_and_monotonic_and_sleep_offset in get_expired_time

Change-Id: I6ebe6b954b2ff328d46898d683650dafb9c4fe74
Signed-off-by: Erik Gilling <konkers@android.com>

7 years agousb: gadget: composite: USB_GET_CONFIGURATION must return 0 in unconfigured state.
Oleg Matcovschi [Fri, 11 Mar 2011 18:24:30 +0000]
usb: gadget: composite: USB_GET_CONFIGURATION must return 0 in unconfigured state.

Change-Id: I5212ca9990308d0c4ae6a55c60cba42d6b0e4fee
Signed-off-by: Oleg Matcovschi <olegmatcovsky@gmail.com>

7 years agoUSB: gadget: f_adb: dequeue request on error in adb_read
Iliyan Malchev [Fri, 18 Feb 2011 19:28:32 +0000]
USB: gadget: f_adb: dequeue request on error in adb_read

In adb_read(), if wait_event_interruptible() returns an error, we need to
remove the request from the EP queue.  Else, on the next call to adb_read(), we
will attempt to enqueue the request again, potentially corrupting the
queue.  This is what happens with musb_gadget_queue(), which does not check for
duplicate requests.

Signed-off-by: Iliyan Malchev <malchev@google.com>

7 years agoUSB: gadget: f_mtp: Fix problems transferring files from device to host
Mike Lockwood [Mon, 7 Feb 2011 16:51:07 +0000]
USB: gadget: f_mtp: Fix problems transferring files from device to host

Exit from send_file_work immediately when a cancel request is received.

Only busy status if there is a cancel pending that has not been repoorted to userspace.
This avoids a race condition that can occur when mtp_read resets the state
to STATE_BUSY before we report status OK back to the host.

Signed-off-by: Mike Lockwood <lockwood@android.com>

7 years agoUSB: gadget: composite: fix compile issues
Vikram Pandita [Tue, 8 Feb 2011 05:20:50 +0000]
USB: gadget: composite: fix compile issues

In file included from drivers/usb/gadget/ether.c:114:
drivers/usb/gadget/composite.c: In function 'usb_composite_force_reset':
drivers/usb/gadget/composite.c:121: error: implicit declaration of function 'msleep'
drivers/usb/gadget/composite.c: In function 'usb_add_function':
drivers/usb/gadget/composite.c:158: error: implicit declaration of function 'MKDEV'

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>

7 years agoblock: genhd: Add partition name to the partition info uevent callback
Brian Swetland [Fri, 4 Feb 2011 21:19:10 +0000]
block: genhd: Add partition name to the partition info uevent callback

For disk and partition devices, add new uevent parameter:
PARTNAME specifices the partition name of a partition device

Signed-off-by: Dima Zavin <dima@android.com>

7 years agoARM: vfp: Move exception address fixup into vfphw.S
Colin Cross [Thu, 27 Jan 2011 23:46:20 +0000]
ARM: vfp: Move exception address fixup into vfphw.S

If the PC on the stack is updated in entry-armv.S,
do_undefinstr can get called after the fixup.  do_undefinstr
does its own fixup, and doing both causes the PC to point to
half way through an instruction.

Instead, do the fixup in do_vfp, where only the vfp code
can get called.

Change-Id: I6d966887adc8ed58d88bfe0cb3c0ba29213be488
Signed-off-by: Colin Cross <ccross@android.com>

7 years agocpufreq: Prevent memory leak in cpufreq_stats on hotplug
Colin Cross [Sat, 29 Jan 2011 03:32:31 +0000]
cpufreq: Prevent memory leak in cpufreq_stats on hotplug

Ensures that cpufreq_stats_free_table is called before
__cpufreq_remove_dev on cpu hotplug (which also occurs during
suspend on SMP systems) to make sure that sysfs_remove_group
can get called before the cpufreq kobj is freed.  Otherwise,
the sysfs file structures are leaked.

Change-Id: I87e55277272f5cfad47e9e7c92630e990bb90069
Signed-off-by: Colin Cross <ccross@android.com>

7 years agoPM: Change dpm watchdog to support async suspend
Benoit Goby [Thu, 27 Jan 2011 02:28:33 +0000]
PM: Change dpm watchdog to support async suspend

Exclude from the watchdog the time spent waiting for children that
are resumed asynchronously and time every devices, whether or not they
resumed synchronously.

Change-Id: I84209dfd5df72842e045096c906fd61e20e6d183
Signed-off-by: Benoit Goby <benoit@android.com>

7 years agoPrint pending wakeup IRQ preventing suspend to dmesg
Todd Poynor [Mon, 24 Jan 2011 22:36:39 +0000]
Print pending wakeup IRQ preventing suspend to dmesg

Change-Id: I36f90735c75fb7c7ab1084775ec0d0ab02336e6e
Signed-off-by: Todd Poynor <toddpoynor@google.com>

7 years agoinput: keyreset: Only print message for default handler
Colin Cross [Fri, 21 Jan 2011 21:42:46 +0000]
input: keyreset: Only print message for default handler

Change-Id: I68e5451fef2e6f08bf1035077ea999e34a619f87
Signed-off-by: Colin Cross <ccross@android.com>

7 years agoPM: Dump suspend thread stack on dpm suspend timeout
Benoit Goby [Fri, 21 Jan 2011 23:53:44 +0000]
PM: Dump suspend thread stack on dpm suspend timeout

When a driver takes more than 3 seconds to suspend, dump the suspend
thread stack since BUG() might only dump the idle thread stack.

Change-Id: If854db355fdcf3b773ea20b1b5e031def6d4b114
Signed-off-by: Benoit Goby <benoit@android.com>

7 years agoinput: evdev: Add missing wake_lock_destroy
Benoit Goby [Wed, 19 Jan 2011 22:10:37 +0000]
input: evdev: Add missing wake_lock_destroy

Change-Id: Ief1ef44d98a197e5b457f5e8617c413e76e3c6d2
Signed-off-by: Benoit Goby <benoit@android.com>

7 years agoARM: Fix up vfp exception location in thumb mode
Colin Cross [Fri, 14 Jan 2011 22:32:49 +0000]
ARM: Fix up vfp exception location in thumb mode

The exception handler in entry-armv.S checks for thumb mode and
correctly determines the exception location and instruction,
but VFP_bounce uses the uncorrected location off the stack.
If the VFP exception occured in Thumb mode, fix up the
exception location on the stack to match the value that would
be returned in ARM mode.

Fixes segfaults in userspace applications running in Thumb mode
caused by a handled VFP exception returning to the middle of the
instruction that triggered the exception.

Change-Id: I02be4c5b546561d9a967a02c1e9eb1de876cff07
Original-author: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Colin Cross <ccross@android.com>

7 years agoUSB: gadget: f_mtp: Make sure request is dequeued if transfer is canceled
Mike Lockwood [Thu, 13 Jan 2011 21:19:57 +0000]
USB: gadget: f_mtp: Make sure request is dequeued if transfer is canceled

If the host cancels a file transfer while we have a read request pending,
call usb_ep_dequeue to cancel the read.
Also return -ECANCELED from mtp_ioctl if we are canceled in MTP_RECEIVE_FILE

Signed-off-by: Mike Lockwood <lockwood@android.com>

7 years agonet: wireless: bcm4329: Turn off CONFIG_US_NON_DFS_CHANNELS_ONLY
Dmitry Shmidt [Thu, 13 Jan 2011 04:12:26 +0000]
net: wireless: bcm4329: Turn off CONFIG_US_NON_DFS_CHANNELS_ONLY

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcm4329: Update to version 4.218.248-20
Dmitry Shmidt [Thu, 13 Jan 2011 00:22:14 +0000]
net: wireless: bcm4329: Update to version 4.218.248-20

- Use US/69 locale for US
- Remove dhdsdio_mem_dump() function

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agortc: alarm: Update hrtimer if alarm at the head of the queue is reprogrammed
Arve Hjønnevåg [Sat, 8 Jan 2011 03:00:01 +0000]
rtc: alarm: Update hrtimer if alarm at the head of the queue is reprogrammed

If an alarm was restarted with a value that moved it away from the head
of a queue, the hrtimer would not be updated. This would cause unnecessary

Change-Id: If379f8dd92b0bdb3173bd8d057adfe0dc1d15259
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoinput: keyreset: Allow reset function to be overriden
Colin Cross [Fri, 7 Jan 2011 22:52:56 +0000]
input: keyreset: Allow reset function to be overriden

Change-Id: Ibb3dda05772b2e89d7b2646689944d309cb1f74e
Signed-off-by: Colin Cross <ccross@android.com>

7 years agocpufreq interactive governor: fix crash on CPU shutdown
Todd Poynor [Fri, 24 Dec 2010 01:33:07 +0000]
cpufreq interactive governor: fix crash on CPU shutdown

Don't reference the saved copy of the CPU's cpufreq policy
pointer after the governor has been stopped for the CPU.

When the governor is stopped for a CPU:

* Use del_timer_sync() to wait for a currently-running timer
function to stop.

* Delete the timer when the governor is stopped for the
associated CPU, not when the last CPU is stopped.

* Flush any speed down work ongoing.

* Reset the timestamp that is used to tell if the timer function
has had a chance to run since last idle exit.

Check the governor enabled flag for the CPU before re-arming the
timer from within the timer function and at idle exit (in case
stopping the governor at runtime).

Check the governor enabled flag for the CPU in the worker
function and thread before using the policy pointer.  (There is
still a tiny window in the thread that needs more work to close.)

Change-Id: Ifaddf7a495a8dae15a579a57bdc654f7c47f6ada
Signed-off-by: Todd Poynor <toddpoynor@google.com>

7 years agostaging: android: lowmemorykiller: Ignore shmem pages in page-cache
Arve Hjønnevåg [Wed, 24 Nov 2010 01:29:04 +0000]
staging: android: lowmemorykiller: Ignore shmem pages in page-cache

Change-Id: Ia54fc50b7dcabfeb71eb487c652803f83e2f3d8e
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agostaging: android: lowmemorykiller: Don't wait more than one second for a process...
Arve Hjønnevåg [Wed, 24 Nov 2010 02:20:28 +0000]
staging: android: lowmemorykiller: Don't wait more than one second for a process to die

If a process forked and the child process was killed by the
lowmemorykiller, the lowmemory killer would be disabled until
the parent process reaped the child or it died itself.

Change-Id: I709b1a4e1b1a1970e51d26a39fcbee57977bbc7f
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agolowmemorykiller: don't unregister notifier from atomic context
Rabin Vincent [Thu, 9 Sep 2010 05:18:21 +0000]
lowmemorykiller: don't unregister notifier from atomic context

The lowmemorykiller registers an atomic notifier for notfication of when
the task is freed.  From this atomic notifier callback, it removes the
atomic notifier via task_free_unregister().  This is incorrect because
atomic_notifier_chain_unregister() calls syncronize_rcu(), which can
sleep, which shouldn't be done from an atomic notifier.

Fix this by registering the notifier during init, and only unregister it
if the lowmemorykiller is unloaded.

Change-Id: I1577b04e617bc2b2e39dcb490fcfc9ce660eb7ec
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Christian Bejram <christian.bejram@stericsson.com>

7 years agocgroup: Remove call to synchronize_rcu in cgroup_attach_task
Colin Cross [Wed, 24 Nov 2010 05:37:04 +0000]
cgroup: Remove call to synchronize_rcu in cgroup_attach_task

synchronize_rcu can be very expensive, averaging 100 ms in
some cases.  In cgroup_attach_task, it is used to prevent
a task->cgroups pointer dereferenced in an RCU read side
critical section from being invalidated, by delaying the
call to put_css_set until after an RCU grace period.

To avoid the call to synchronize_rcu, make the put_css_set
call rcu-safe by moving the deletion of the css_set links
into free_css_set_work, scheduled by the rcu callback

The decrement of the cgroup refcount is no longer
synchronous with the call to put_css_set, which can result
in the cgroup refcount staying positive after the last call
to cgroup_attach_task returns.  To allow the cgroup to be
deleted with cgroup_rmdir synchronously after
cgroup_attach_task, have rmdir check the refcount of all
associated css_sets.  If cgroup_rmdir is called on a cgroup
for which the css_sets all have refcount zero but the
cgroup refcount is nonzero, reuse the rmdir waitqueue to
block the rmdir until free_css_set_work is called.

Signed-off-by: Colin Cross <ccross@android.com>

7 years agocgroup: Set CGRP_RELEASABLE when adding to a cgroup
Colin Cross [Wed, 24 Nov 2010 05:37:03 +0000]
cgroup: Set CGRP_RELEASABLE when adding to a cgroup

Changes the meaning of CGRP_RELEASABLE to be set on any cgroup
that has ever had a task or cgroup in it, or had css_get called
on it.  The bit is set in cgroup_attach_task, cgroup_create,
and __css_get.  It is not necessary to set the bit in
cgroup_fork, as the task is either in the root cgroup, in
which can never be released, or the task it was forked from
already set the bit in croup_attach_task.

Signed-off-by: Colin Cross <ccross@android.com>

7 years agoPM: Wait for completion of the parent resume before resuming
Benoit Goby [Mon, 13 Dec 2010 23:27:06 +0000]
PM: Wait for completion of the parent resume before resuming

If the parent device is in the DPM_RESUMING state, resume might get called
before the parent's resume has completed, because dpm_wait won't get
called. This issue was introduced by:
3d46a3c PM: Prevent waiting forever on asynchronous resume after abort

Wait for completion of the parent resume if the parent state is >= DPM_OFF

Signed-off-by: Benoit Goby <benoit@android.com>
[dima: fixed to work on 2.6.38, use .in_suspend instead of .state]
Signed-off-by: Dima Zavin <dima@android.com>

7 years agocpufreq interactive governor save/restore IRQs around cpumask spinlocks
Todd Poynor [Fri, 3 Dec 2010 19:20:09 +0000]
cpufreq interactive governor save/restore IRQs around cpumask spinlocks

Need to use irqsave/restore spin locking for cpumasks since these
are accessed in timers and in thread context.

Change-Id: I4a53eaf0ced7e73b445feddba90ec11482de9126
Signed-off-by: Todd Poynor <toddpoynor@google.com>

7 years agocpufreq: interactive: New 'interactive' governor
Mike Chan [Tue, 22 Jun 2010 18:26:45 +0000]
cpufreq: interactive: New 'interactive' governor

This governor is designed for latency-sensitive workloads, such as
interactive user interfaces.  The interactive governor aims to be
significantly more responsive to ramp CPU quickly up when CPU-intensive
activity begins.

Existing governors sample CPU load at a particular rate, typically
every X ms.  This can lead to under-powering UI threads for the period of
time during which the user begins interacting with a previously-idle system
until the next sample period happens.

The 'interactive' governor uses a different approach. Instead of sampling
the CPU at a specified rate, the governor will check whether to scale the
CPU frequency up soon after coming out of idle.  When the CPU comes out of
idle, a timer is configured to fire within 1-2 ticks.  If the CPU is very
busy from exiting idle to when the timer fires then we assume the CPU is
underpowered and ramp to MAX speed.

If the CPU was not sufficiently busy to immediately ramp to MAX speed, then
the governor evaluates the CPU load since the last speed adjustment,
choosing the highest value between that longer-term load or the short-term
load since idle exit to determine the CPU speed to ramp to.

A realtime thread is used for scaling up, giving the remaining tasks the
CPU performance benefit, unlike existing governors which are more likely to
schedule rampup work to occur after your performance starved tasks have

The tuneables for this governor are:
The minimum amount of time to spend at the current frequency before
ramping down. This is to ensure that the governor has seen enough
historic CPU load data to determine the appropriate workload.
Default is 80000 uS.
The CPU load at which to ramp to max speed.  Default is 85.

Change-Id: Ib2b362607c62f7c56d35f44a9ef3280f98c17585
Signed-off-by: Mike Chan <mike@android.com>
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Bug: 3152864

7 years agoARM: fiq_debugger: Add help command
Dmitry Shmidt [Tue, 16 Nov 2010 23:40:13 +0000]
ARM: fiq_debugger: Add help command

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agomisc: kernel_debugger: Add help command
Dmitry Shmidt [Tue, 16 Nov 2010 23:39:43 +0000]
misc: kernel_debugger: Add help command

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agoARM: fiq_debugger: make fiq_debugger be in debug mode by default
Dima Zavin [Wed, 10 Nov 2010 23:39:07 +0000]
ARM: fiq_debugger: make fiq_debugger be in debug mode by default

Adds a config option that controls whether or not the console is on at
boot, defaulting to no.

Change-Id: Id4a3cad1c9dd4fb3c2b8c2298ca5d385a8bd0f8d
Signed-off-by: Dima Zavin <dima@android.com>

7 years agosdhci: Always pass clock request value zero to set_clock host op
Todd Poynor [Mon, 11 Oct 2010 23:51:28 +0000]
sdhci: Always pass clock request value zero to set_clock host op

To allow the set_clock host op to disable the SDCLK source when not
needed, always call the host op when the requested clock speed is
zero.  Do this even if host->clock already equals zero, because
the SDHCI driver may set that value (without calling the host op)
to force an update at the next (non-zero-speed) call.

Change-Id: If99230d76138679b5767f77cb925f15408ae518e
Signed-off-by: Todd Poynor <toddpoynor@google.com>

7 years ago[ARM] fiq_debugger: Print local timer irqs count
Rebecca Schultz Zavin [Fri, 22 Oct 2010 22:55:17 +0000]
[ARM] fiq_debugger: Print local timer irqs count

Prints the number of local timer irqs on each cpu when
 the irqs command is executed.

Change-Id: Ic70fa9f528d98996fabb2d0cc80e937c5b239c1a
Signed-off-by: Rebecca Schultz Zavin <rebecca@android.com>

7 years agostaging: remove Greg's TODO, now obsolete.
Brian Swetland [Thu, 21 Oct 2010 21:19:31 +0000]
staging: remove Greg's TODO, now obsolete.

Signed-off-by: Brian Swetland <swetland@google.com>

7 years agommc: Fix pm_notifier obeying deferred resume
Dmitry Shmidt [Thu, 14 Oct 2010 22:20:21 +0000]
mmc: Fix pm_notifier obeying deferred resume

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agomisc: kernel_debugger: fix handle_sysrq call
Erik Gilling [Tue, 31 Aug 2010 01:16:30 +0000]
misc: kernel_debugger: fix handle_sysrq call

Change-Id: I58376b7de56751fd57a038fb8f908f36fe60dda1
Signed-off-by: Todd Poynor <toddpoynor@google.com>
Author:    Erik Gilling <konkers@android.com>

7 years ago[ARM] fiq glue: Align fiq stacks
Colin Cross [Wed, 6 Oct 2010 05:08:01 +0000]
[ARM] fiq glue: Align fiq stacks

Change-Id: I956f05d0b0ce48572e611765e56a439dc036c052
Signed-off-by: Colin Cross <ccross@android.com>

7 years agommc: Add "ignore mmc pm notify" functionality
Dmitry Shmidt [Thu, 7 Oct 2010 21:39:16 +0000]
mmc: Add "ignore mmc pm notify" functionality

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years ago[ARM] fiq debugger: Allow selection of target cpu
Colin Cross [Sat, 2 Oct 2010 06:41:38 +0000]
[ARM] fiq debugger: Allow selection of target cpu

Change-Id: I676bac08ba12dfa506aea16800fc80432b4bc83d
Signed-off-by: Colin Cross <ccross@android.com>

7 years agommc: sdio: Fix enable_hs and enable_wide in sdio_reset_comm()
Dmitry Shmidt [Thu, 7 Oct 2010 00:25:02 +0000]
mmc: sdio: Fix enable_hs and enable_wide in sdio_reset_comm()

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agoARM: fiq debugger: Add tty to fiq debugger
Colin Cross [Mon, 16 Aug 2010 21:51:51 +0000]
ARM: fiq debugger: Add tty to fiq debugger

Change-Id: I80347cdb70cda104b96562c63f972c1f217e3822
Signed-off-by: Colin Cross <ccross@google.com>

7 years agoARM: Add generic fiq serial debugger
Iliyan Malchev [Sun, 6 Jun 2010 00:36:24 +0000]
ARM: Add generic fiq serial debugger

Change-Id: Ibb536c88f0dbaf4766d0599296907e35e42cbfd6
Signed-off-by: Iliyan Malchev <malchev@google.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: Add fiq_glue
Arve Hjønnevåg [Tue, 28 Sep 2010 00:50:00 +0000]
ARM: Add fiq_glue

Change-Id: I27d2554e07d9de204e0a06696d38db51608d9f6b
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Colin Cross <ccross@android.com>

7 years agoAllow CONFIG_STACKTRACE to be enabled by itself.
Arve Hjønnevåg [Thu, 3 Jun 2010 23:33:07 +0000]
Allow CONFIG_STACKTRACE to be enabled by itself.

This allows us to get a kernel stacktrace for a thread though /proc.
Also enable it by default.

Change-Id: If8c21cd02feaf9863f4841ace524fa30c7328d49
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoSupport lseek(2) in ashmem driver
Bjorn Bringert [Thu, 26 Aug 2010 14:08:32 +0000]
Support lseek(2) in ashmem driver

Signed-off-by: Bjorn Bringert <bringert@android.com>
Change-Id: I509d18b21832e229737ea7ebaa231fb107eb61d7

7 years agommc: subtract boot sectors from disk size for eMMC 4.3+ devices
Gary King [Fri, 16 Jul 2010 00:11:32 +0000]
mmc: subtract boot sectors from disk size for eMMC 4.3+ devices

the csd sector count reported by eMMC 4.3+ cards includes the boot
partition size; subtract this from the size reported to the disk
since the boot partition is inaccessible

Change-Id: I601b83aa0159b7aa446409ea8c945b256dd0b5b1
Signed-off-by: Gary King <gking@nvidia.com>

7 years agommc_block: Allow more than 8 partitions per card
Colin Cross [Fri, 3 Sep 2010 19:41:21 +0000]
mmc_block: Allow more than 8 partitions per card

Set the GENHD_FL_EXT_DEVT flag, which will allocate minor numbers
in major 259 for partitions past disk->minors.

Also remove the use of disk_devt to determine devidx from md->disk.
md->disk->first_minor is always initialized from devidx and can
always be used to recover it.

Signed-off-by: Colin Cross <ccross@android.com>

7 years agoPM: Prevent waiting forever on asynchronous resume after abort
Colin Cross [Thu, 2 Sep 2010 01:35:55 +0000]
PM: Prevent waiting forever on asynchronous resume after abort

Only wait on a parent device during resume if the parent device is

Consider three drivers, A, B, and C.  The parent of A is C, and C
has async_suspend set.  On boot, C->power.completion is initialized
to 0.

During the first suspend:
  device_suspend(B) returns error, aborts suspend
     dpm_wait(A->parent == C)

The wait_for_completion will never complete, because
complete_all(C->power.completion) will only be called from
device_suspend(C) or device_resume(C), neither of which is called
if suspend is aborted before C.

After a successful suspend->resume cycle, where B doesn't abort
suspend, C->power.completion is left in the completed state by the
call to device_resume(C), and the same call path will work if B
aborts suspend.

Signed-off-by: Colin Cross <ccross@android.com>

7 years agopower: wakelock: call __get_wall_to_monotonic() instead of using wall_to_monotonic
Erik Gilling [Tue, 31 Aug 2010 01:22:20 +0000]
power: wakelock: call __get_wall_to_monotonic() instead of using wall_to_monotonic

Change-Id: I9e9c3b923bf9a22ffd48f80a72050289496e57d8