7 years ago[media] DocBook/frontend.xml: Recomend the usage of the new API
Mauro Carvalho Chehab [Tue, 7 Jun 2011 23:43:25 +0000]
[media] DocBook/frontend.xml: Recomend the usage of the new API

The old way of setting delivery system parameters were to use
an union with specific per-system parameters. However, as newer
delivery systems required more data, the structure size weren't
enough to fit. So, recomend using the DVBS2API instead.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/dvbproperty.xml: Reorganize the parameters
Mauro Carvalho Chehab [Tue, 7 Jun 2011 23:05:13 +0000]
[media] DocBook/dvbproperty.xml: Reorganize the parameters

Put the parameters at the sequencial order as they appear inside
the frontend.h header.

TODO: fix the per-standard section, to reflect the parameters
that should actually be used for each transmission system type.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/dvbproperty.xml: Use links for all parameters
Mauro Carvalho Chehab [Tue, 7 Jun 2011 22:48:46 +0000]
[media] DocBook/dvbproperty.xml: Use links for all parameters

Instead of adding a program listing, just add there all parameters.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/dvbproperty.xml: Document the remaining S2API parameters
Mauro Carvalho Chehab [Tue, 7 Jun 2011 22:37:47 +0000]
[media] DocBook/dvbproperty.xml: Document the remaining S2API parameters

There were lots of DVB S2API parameters that were never documented.
Let's add a definition for all of them, based on what's currently
used inside the core and the drivers.

The description here is not complete nor perfect, so patches
improving it are welcome.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/frontend.xml: Better describe the frontend parameters
Mauro Carvalho Chehab [Tue, 7 Jun 2011 21:15:19 +0000]
[media] DocBook/frontend.xml: Better describe the frontend parameters

Update the DVB parameter structs to reflect VSB modulation and
improve a few descriptions.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/frontend.xml: add references for some missing info
Mauro Carvalho Chehab [Tue, 7 Jun 2011 20:58:59 +0000]
[media] DocBook/frontend.xml: add references for some missing info

The frontend.h.xml now references to the main document. However,
several references are missed.

Links the trivial ones with the corresponding API descriptions.

While here, updates the main API to reflect the API improvements.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/frontend.xml: Correlate dvb delivery systems
Mauro Carvalho Chehab [Tue, 7 Jun 2011 20:02:37 +0000]
[media] DocBook/frontend.xml: Correlate dvb delivery systems

As the DVB API provides two ways to specify the delivery
systems, correlate both ways into a table.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/frontend.xml: Link DVB S2API parameters
Mauro Carvalho Chehab [Tue, 7 Jun 2011 19:58:00 +0000]
[media] DocBook/frontend.xml: Link DVB S2API parameters

Associate the frontend.h DVB S2API parmeters to the corresponding
documentation at the spec.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/frontend.xml: Better document fe_type_t
Mauro Carvalho Chehab [Tue, 7 Jun 2011 19:17:00 +0000]
[media] DocBook/frontend.xml: Better document fe_type_t

The fe_type_t documentation was incomplete and not linked to the
dvb/frontend.h.xml. Properly document it.

Also, drop a note that newer formats are only supported via
FE_GET_PROPERTY/FE_GET_SET_PROPERTY ioctls.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook/Makefile: add references for several dvb structures
Mauro Carvalho Chehab [Tue, 7 Jun 2011 17:51:56 +0000]
[media] DocBook/Makefile: add references for several dvb structures

With this change, it is now possible to discover the gap between
the API defined inside include/dvb/frontend.h and the one documented
into the specs.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] v4l: Documentation about the JPGL pixel format
Jean-François Moine [Fri, 3 Jun 2011 06:33:41 +0000]
[media] v4l: Documentation about the JPGL pixel format

The JPG-Light, AKA Pegasus Lossless JPEG, is used in Divio webcams based
on NW 800/801/802 chips.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: make checkpatch.pl happy
Mauro Carvalho Chehab [Mon, 6 Jun 2011 19:51:11 +0000]
[media] xc4000: make checkpatch.pl happy

Solve the ./scripts/checkpatch.pl compliants for the patches
that added xc4000 support, including a few changes at dib0700.

While here, remove a few printk noise by converting some msgs
into debug ones.

Cc: Istvan Varga <istvan_v@mailbox.hu>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: removed card_type
istvan_v@mailbox.hu [Mon, 6 Jun 2011 16:03:44 +0000]
[media] xc4000: removed card_type

Removed the use of 'card_type' from the tuner configuration structure, and
replaced it with separate parameters to set board-specific configuration.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: check firmware version
istvan_v@mailbox.hu [Mon, 6 Jun 2011 16:00:17 +0000]
[media] xc4000: check firmware version

Enabled code to check if the version of the firmware reported by the hardware
is correct after uploading it.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dvb-usb/Kconfig: auto-select XC4000 tuner for dib0700
istvan_v@mailbox.hu [Mon, 6 Jun 2011 15:57:43 +0000]
[media] dvb-usb/Kconfig: auto-select XC4000 tuner for dib0700

Automatically select the xc4000 module for dib0700 if the tuner selection is
not customized.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: code cleanup
istvan_v@mailbox.hu [Mon, 6 Jun 2011 15:54:54 +0000]
[media] xc4000: code cleanup

Various coding style changes:
  - removed unused / commented out code
  - changed C++ style comments to C format
  - renamed functions and variables that included upper case letters in the name
  - removed tabs from module parameter descriptions
  - replaced the use of XC_RESULT_* with standard error codes

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: detect also xc4100
Istvan Varga [Sat, 4 Jun 2011 15:25:19 +0000]
[media] xc4000: detect also xc4100

Added code to detect the XC4100 chip, which is presumably an analog-only
"value" version of the XC4000. It is not sure, however, if any devices
using this have actually been produced and sold, so the patch may be
unneeded.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: removed redundant tuner reset
Istvan Varga [Sat, 4 Jun 2011 15:21:17 +0000]
[media] xc4000: removed redundant tuner reset

This patch causes the tuner reset command to be ignored in the firmware
code, since this only happens when the BASE/INIT1 firmware is loaded by
check_firmware(), and in that case check_firmware() already calls the
reset callback before starting to load the firmware.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: xc_tune_channel() cleanup
Istvan Varga [Sat, 4 Jun 2011 15:18:41 +0000]
[media] xc4000: xc_tune_channel() cleanup

Minor coding changes related to the xc_tune_channel() function.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: implemented analog TV and radio
Istvan Varga [Sat, 4 Jun 2011 15:17:22 +0000]
[media] xc4000: implemented analog TV and radio

The following patch implements support for analog TV and FM radio.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: added audio_std module parameter
Istvan Varga [Sat, 4 Jun 2011 15:15:51 +0000]
[media] xc4000: added audio_std module parameter

The 'audio_std' module parameter makes it possible to fine tune
some audio related aspects of the driver, like setting the exact
audio standard (NICAM, A2, etc.) to be used for some video standards.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: setting registers
Istvan Varga [Sat, 4 Jun 2011 15:12:42 +0000]
[media] xc4000: setting registers

This patch implements setting the registers in xc4000_set_params()
and xc4000_set_analog_params(). A new register is defined which enables
filtering of the composite video output (this is needed to avoid bad
picture quality with some boards).

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: debug message improvements
Istvan Varga [Sat, 4 Jun 2011 15:08:29 +0000]
[media] xc4000: debug message improvements

The following patch makes a few minor changes to the printing
of debug messages, and reporting the tuner status. The 'debug'
module parameter can now be set from 0 to 2 to control the
verbosity of debug messages.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: firmware initialization
Istvan Varga [Sat, 4 Jun 2011 15:04:51 +0000]
[media] xc4000: firmware initialization

This patch fixes/cleans up the loading of the firmware file when the
driver is loaded and initialized.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: implemented power management
Istvan Varga [Sat, 4 Jun 2011 15:03:03 +0000]
[media] xc4000: implemented power management

The following patch implements the xc4000_sleep() function.
The 'no_powerdown' module parameter is now interpreted differently:
  - 0 uses a device-specific default
  - 1 disables power management like before
  - 2 enables power management

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: added card_type
Istvan Varga [Fri, 3 Jun 2011 12:38:04 +0000]
[media] xc4000: added card_type

This patch adds support for selecting a card type in struct
xc4000_config, to allow for implementing some card specific code
in the driver.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: check_firmware() cleanup
Istvan Varga [Sat, 4 Jun 2011 14:59:54 +0000]
[media] xc4000: check_firmware() cleanup

This patch makes the following fixes in check_firmware():
  - there is only one BASE and INIT1 firmware for XC4000
  - loading SCODE is needed also for FM radio

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: simplified load_scode
Istvan Varga [Sat, 4 Jun 2011 14:56:18 +0000]
[media] xc4000: simplified load_scode

Removed unused code from load_scode() (all SCODE firmwares are
assumed to have the HAS_IF bit set).

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: simplified seek_firmware()
Istvan Varga [Sat, 4 Jun 2011 14:52:34 +0000]
[media] xc4000: simplified seek_firmware()

This patch simplifies the code in seek_firmware().

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: added firmware_name parameter
Istvan Varga [Sat, 4 Jun 2011 14:48:16 +0000]
[media] xc4000: added firmware_name parameter

The firmware_name module parameter makes it possible to set the firmware
file name. It defaults to "xc4000.fw" if not specified.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: fixed frequency error
Istvan Varga [Fri, 3 Jun 2011 15:27:30 +0000]
[media] xc4000: fixed frequency error

The xc_get_frequency_error() function reported the frequency error
incorrectly. The data read from the hardware is a signed integer, in
15625 Hz units. The attached patch fixes the bug.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: added mutex
Istvan Varga [Fri, 3 Jun 2011 15:23:33 +0000]
[media] xc4000: added mutex

This patch adds a mutex to xc4000_priv, to protect the driver
from being accessed by multiple processes at the same time.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: added support for 7 MHz DVB-T
Istvan Varga [Fri, 3 Jun 2011 15:17:59 +0000]
[media] xc4000: added support for 7 MHz DVB-T

The following patch implements support for DVB-T with 7 MHz bandwidth.

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: updated standards table
Istvan Varga [Fri, 3 Jun 2011 13:55:24 +0000]
[media] xc4000: updated standards table

This patch makes the following changes to the standards table:
  - added 'u16 int_freq' to struct XC_TV_STANDARD (needed for analog TV
    and radio, 0 for DVB-T)
  - added new standard for SECAM-D/K video with PAL-D/K audio
  - the 'int_freq' values are now specified in the table
  - changed VideoMode for NTSC and PAL-B/G standards

Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: code cleanup
Istvan Varga [Fri, 3 Jun 2011 13:11:48 +0000]
[media] xc4000: code cleanup

This is the first of a set of patches that update the original xc4000
sources to my modified version. It removes some unused code, and makes
a few minor formatting changes.

[mchehab@redhat.com: re-add XC_TUNE_ANALOG/XC_TUNE_DIGITAL constants, to avoid compilation breakage]
Signed-off-by: Istvan Varga <istvan_v@mailbox.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: Fix a few bad whitespaces on it
Mauro Carvalho Chehab [Thu, 2 Jun 2011 14:36:56 +0000]
[media] xc4000: Fix a few bad whitespaces on it

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib0700: remove notes from bringup of PCTV 340e
Devin Heitmueller [Sun, 27 Dec 2009 21:58:11 +0000]
[media] dib0700: remove notes from bringup of PCTV 340e

Remove some inline comments I had written from when I was computing the proper
dib7000p configuration to work with the xc4000.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: cleanup dmesg logging
Devin Heitmueller [Sun, 27 Dec 2009 21:15:14 +0000]
[media] xc4000: cleanup dmesg logging

Remove some printk() calls added during driver development, and demote some
other messages to debug only (to reduce dmesg chatter).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: rename firmware image filename
Devin Heitmueller [Sun, 27 Dec 2009 20:55:13 +0000]
[media] xc4000: rename firmware image filename

Give the xc4000 firmware filename a filename that makes more sense for public
release.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: turn off debug logging by default
Devin Heitmueller [Sun, 27 Dec 2009 20:50:43 +0000]
[media] xc4000: turn off debug logging by default

Don't dump debug into to dmesg by default (something I had enabled during
bringup of the xc4000 driver).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib0700: make PCTV 340e work!
Devin Heitmueller [Sun, 27 Dec 2009 20:44:31 +0000]
[media] dib0700: make PCTV 340e work!

Fixup the PLL and AGC configs so that the 340e works (correcting errors I made
when I did the original config blindly).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: get rid of hard-coded 8MHz firmware config
Devin Heitmueller [Mon, 5 Oct 2009 04:27:14 +0000]
[media] xc4000: get rid of hard-coded 8MHz firmware config

Remove a hack I had put in to force the firmware to be 8MHz, now setting
the firmware properly based on the target standard.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib0700: fixup PLL config for PCTV 340e
Devin Heitmueller [Mon, 5 Oct 2009 03:34:04 +0000]
[media] dib0700: fixup PLL config for PCTV 340e

Based on a reference trace under Windows, reverse engineer the PLL config.
Note that the xtal is not yet setup, and the timf cannot be determined yet
because my reference trace doesn't actually achieve a signal lock.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: handle dib0700 broken i2c stretching
Devin Heitmueller [Mon, 5 Oct 2009 02:09:18 +0000]
[media] xc4000: handle dib0700 broken i2c stretching

It was confirmed by DibCom that i2c stretching is broken in the i2c master
on the dib7700.  So we need to put a hack into the xc4000 driver to not
complain in certain very specific cases where we know i2c stretching occurs.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: setup dib7000p AGC config for PCTV 340e
Devin Heitmueller [Tue, 28 Jul 2009 04:16:05 +0000]
[media] xc4000: setup dib7000p AGC config for PCTV 340e

Setup a proper AGC config for the 340e, based on the Windows USB trace

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: use if_khz provided in xc4000_config
Devin Heitmueller [Tue, 28 Jul 2009 03:04:27 +0000]
[media] xc4000: use if_khz provided in xc4000_config

Remove hard-coded references to 5400, using the value passed in when the
xc4000 is attached.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: continued cleanup of the firmware loading routine
Devin Heitmueller [Tue, 28 Jul 2009 02:51:54 +0000]
[media] xc4000: continued cleanup of the firmware loading routine

Properly setup the standard firmware loading and scode loading, as well as
getting rid of a ton of dead code.  Note that I am getting a single i2c
error when the standard firmware sets the video standard, but everything else
seems to be loading properly now.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: add code to do standard and scode firmware loading
Devin Heitmueller [Sat, 25 Jul 2009 20:39:54 +0000]
[media] xc4000: add code to do standard and scode firmware loading

Add code to handle firmware blobs for the standard and scode.  Note there
appears to be some issue with loading the DTV8 standard firmware, probably
related to direct/indirect mode.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: remove xc5000 firmware loading routine
Devin Heitmueller [Thu, 23 Jul 2009 00:56:37 +0000]
[media] xc4000: remove xc5000 firmware loading routine

Since we use the xc3028 version of the firmware file parsing routine (which
includes support for scodes and separate blobs), we can drop the xc5000
version of the code.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: remove XREG_BUSY code only supported in xc5000
Devin Heitmueller [Thu, 23 Jul 2009 00:52:11 +0000]
[media] xc4000: remove XREG_BUSY code only supported in xc5000

The xc4000 driver is based on the original xc5000 driver, and while the
xc5000 supports the XREG_BUSY register, the xc4000 does not.  So remove the
code in question.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: properly set type for init1 firmware
Devin Heitmueller [Thu, 23 Jul 2009 00:49:28 +0000]
[media] xc4000: properly set type for init1 firmware

We need to set the firmware type properly in order to locate the init1
firmware.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: cut over to using xc5000 version for loading i2c sequences
Devin Heitmueller [Mon, 20 Jul 2009 05:15:31 +0000]
[media] xc4000: cut over to using xc5000 version for loading i2c sequences

The xc3028 version does i2c splitting in a different manner than xc4000 and
xc5000, so reuse the xc5000 version of the routine (the key here being that
xc4000 expects the first *two* bytes to be the same for splitting transactions.

Doing it the xc3028 way was resulting in i2c errors partially through the
firmware load.  With this change, it would appear that the entire base firmware
is being loaded successfully (product id now properly shows 0x0FA0).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] xc4000: pull in firmware management code from xc3028
Devin Heitmueller [Mon, 20 Jul 2009 03:54:57 +0000]
[media] xc4000: pull in firmware management code from xc3028

Switch over to using the firmware management routines from the tuner-xc2028,
since that has support for scodes, etc.

This code still requires signficant cleanup, and at this point the base
firmware does not load properly (i2c write errors about 300 bytes in).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib7000p: setup dev.parent for i2c master built into 7000p
Devin Heitmueller [Mon, 20 Jul 2009 03:45:25 +0000]
[media] dib7000p: setup dev.parent for i2c master built into 7000p

We need to set the dev.parent member on the dib7000p on its i2c master, or
else calls to request_firmware() will hit an oops in 2.6.31.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib0700: add a sleep before attempting to detect dib7000p
Devin Heitmueller [Mon, 20 Jul 2009 03:42:33 +0000]
[media] dib0700: add a sleep before attempting to detect dib7000p

Add a sleep since in some cases the dib7000p wasn't online when being probed.
The optimal timing has not yet been determined.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib0700: successfully connect to xc4000 over i2c for PCTV 340e
Devin Heitmueller [Tue, 30 Jun 2009 00:11:02 +0000]
[media] dib0700: successfully connect to xc4000 over i2c for PCTV 340e

Use the correct i2c bus to communicate with the tuner, and properly setup the
reset GPIO and i2c address.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib0700: properly setup GPIOs for PCTV 340e
Devin Heitmueller [Wed, 24 Jun 2009 03:07:01 +0000]
[media] dib0700: properly setup GPIOs for PCTV 340e

Provide a frontend setup routine for the PCTV 340e which takes into account
the specific GPIO setup of the board.

Note that this patch does *not* take into account the xc4000 reset pin, which
is attached to the dib7000.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib0700: add USB id for PCTV 340eSE
Devin Heitmueller [Wed, 24 Jun 2009 01:48:02 +0000]
[media] dib0700: add USB id for PCTV 340eSE

Add the board profile for the PCTV 340eSE, since that's what I have here
for development.

[mchehab@redhat.com: rebased on the top of the current tree]
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib0700: add initial code for PCTV 340e by Davide Ferri
Davide Ferri [Wed, 24 Jun 2009 01:34:06 +0000]
[media] dib0700: add initial code for PCTV 340e by Davide Ferri

This is initial code written by Davide Ferri for the PCTV 340e, including
a new xc4000 driver.  I am checking in all the code unmodified, and making
no assertions about its quality (other than confirming it compiles).

[mchehab@redhat.com: rebased on the top of the current tree]
Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Davide Ferri <davidef1986@gmail.com>
Cc: Patrick Boettcher <pboettcher@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] mt9v011: Fixed gain calculation
Johannes Obermaier [Thu, 2 Jun 2011 16:03:41 +0000]
[media] mt9v011: Fixed gain calculation

The implementation of the gain calculation for this sensor is incorrect.
It is only working for the first 127 values.

The reason is, that the gain cannot be set directly by writing a value
into the gain registers of the sensor. The gain register work this way
(see datasheet page 24): bits 0 to 6 are called "initial gain". These
are linear. But bits 7 and 8 ("analog multiplicative factors") and bits
9 and 10 ("digital multiplicative factors") work completely different:
Each of these bits increase the gain by the factor 2. So if the bits
7-10 are 0011, 0110, 1100 or 0101 for example, the gain from bits 0-6 is
multiplied by 4. The order of the bits 7-10 is not important for the
resulting gain. (But there are some recommended values for low noise)

The current driver doesn't do this correctly: If the current gain is 000
0111 1111 (127) and the gain is increased by 1, you would expect the
image to become brighter. But the image is completly dark, because the
new gain is 000 1000 0000 (128). This means: Initial gain of 0,
multiplied by 2. The result is 0.

This patch adds a new function which does the gain calculation and also
fixes the same bug for red_balance and blue_balance. Additionally, the
driver follows the recommendation from the datasheet, which says, that
the gain should always be above 0x0020.

Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Johannes Obermaier <johannes.obermaier@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] mt9v011: Added exposure for mt9v011
Johannes Obermaier [Thu, 2 Jun 2011 15:43:14 +0000]
[media] mt9v011: Added exposure for mt9v011

There are problems when you use this camera/sensor in a very bright room
or outside. The image is completely white, because it is overexposed.
The driver uses a default value which is not suitable for all
environments.

This patch makes it possible to adjust the exposure time by youself. I
found out by logging the i2c-data, that the windows driver for this
sensor is doing this, too. I tested the camera on a sunny day and after
adjusting the exposure time, I was able to see a very good image.

Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Johannes Obermaier <johannes.obermaier@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] mt9v011: Fixed incorrect value for the first valid column
Johannes Obermaier [Thu, 2 Jun 2011 15:17:51 +0000]
[media] mt9v011: Fixed incorrect value for the first valid column

According to the datasheet (page 8), the first optical clear
pixel-column is not at position 14. The correct/recommended value is 20.
Without this patch there is a dark line on the left side of the image.

Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Johannes Obermaier <johannes.obermaier@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] rc-core: fix winbond-cir issues
David Härdeman [Wed, 30 Mar 2011 14:20:14 +0000]
[media] rc-core: fix winbond-cir issues

The conversion of winbond-cir to use rc-core seems to have missed a
a few bits and pieces which were in my local tree. Kudos to
Juan Jesús García de Soria Lucena <skandalfo@gmail.com> for noticing.

[mchehab@redhat.com: fix two UTF-8 violations]
Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] rc/redrat3: dereferencing null pointer
Dan Carpenter [Thu, 26 May 2011 08:55:08 +0000]
[media] rc/redrat3: dereferencing null pointer

In the original code, if the allocation failed we dereference "rr3"
when it was NULL.

Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] rc: double unlock in rc_register_device()
Dan Carpenter [Thu, 26 May 2011 08:52:01 +0000]
[media] rc: double unlock in rc_register_device()

If change_protocol() fails and we goto out_raw, then it calls unlock
twice.  I noticed that the other time we called change_protocol() we
held the &dev->lock, so I changed it to hold it here too.

Reviewed-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DVB: dvb_frontend: fix dtv_property_dump for DTV_DVBT2_PLP_ID
Andreas Oberritter [Thu, 26 May 2011 10:54:14 +0000]
[media] DVB: dvb_frontend: fix dtv_property_dump for DTV_DVBT2_PLP_ID

- Add missing entry to array "dtv_cmds".
- Set array size to DTV_MAX_COMMAND + 1 to avoid future off-by-ones.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Andreas Oberritter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] V4L/videobuf2-memops: use pr_debug for debug messages
Uwe Kleine-König [Wed, 1 Jun 2011 20:19:22 +0000]
[media] V4L/videobuf2-memops: use pr_debug for debug messages

Otherwise they clutter the dmesg buffer even on a production kernel.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dvb-usb.h function rc5_scan
Manoel Pinheiro [Sat, 7 May 2011 06:49:13 +0000]
[media] dvb-usb.h function rc5_scan

The function "rc5_scan" in "dvb_usb.h" is returning invalid value.
The value should be returned "u16" but is returning "u8".

See example below in "drivers/media/dvb/dvb-usb/opera1.c":

        send_key = (send_key & 0xffff) | 0x0100;

        for (i = 0; i < ARRAY_SIZE(rc_map_opera1_table); i++) {
            if (rc5_scan(&rc_map_opera1_table[i]) == (send_key & 0xffff)) {
                *state = REMOTE_KEY_PRESSED;
                *event = rc_map_opera1_table[i].keycode;
                opst->last_key_pressed =
                    rc_map_opera1_table[i].keycode;
                break;
            }
            opst->last_key_pressed = 0;
        }

Signed-off-by: Manoel Pinheiro <pinusdtv@hotmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] radio-sf16fmr2: convert to generic TEA575x interface
Ondrej Zary [Wed, 1 Jun 2011 19:57:11 +0000]
[media] radio-sf16fmr2: convert to generic TEA575x interface

Convert radio-sf16fmr2 to use generic TEA575x implementation. Most of the
driver code goes away as SF16-FMR2 is basically just a TEA5757 tuner
connected to ISA bus.
The card can optionally be equipped with PT2254A volume control (equivalent
of TC9154AP) - the volume setting is completely reworked (with balance control
added) and tested.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] cx24113: Don't reuse core macro names
Hans Petter Selasky [Mon, 23 May 2011 11:42:40 +0000]
[media] cx24113: Don't reuse core macro names

The info and err macros are already defined by the USB stack. Rename
these macros to avoid macro redefinition warnings.

Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] itd1000: Don't reuse core macro names
Hans Petter Selasky [Mon, 23 May 2011 11:40:00 +0000]
[media] itd1000: Don't reuse core macro names

The dbg, warn and info macros are already defined by the USB stack.
Rename these macros to avoid macro redefinition warnings.

Refactor lineshift in printouts.

Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] radio-si470x: fix memory leak in si470x_usb_driver_probe()
Alexey Khoroshilov [Tue, 31 May 2011 20:54:40 +0000]
[media] radio-si470x: fix memory leak in si470x_usb_driver_probe()

radio->int_in_urb is not deallocated on error paths in si470x_usb_driver_probe().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] media: Convert vmalloc/memset to vzalloc
Joe Perches [Sat, 28 May 2011 17:36:28 +0000]
[media] media: Convert vmalloc/memset to vzalloc

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years agodvb_net: Simplify the code if DVB NET is not defined
Mauro Carvalho Chehab [Wed, 1 Jun 2011 16:03:12 +0000]
dvb_net: Simplify the code if DVB NET is not defined

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] Make DVB NET configurable in the kernel
Hans Petter Selasky [Mon, 23 May 2011 12:43:35 +0000]
[media] Make DVB NET configurable in the kernel

Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] tea575x: convert to control framework
Ondrej Zary [Mon, 23 May 2011 12:17:19 +0000]
[media] tea575x: convert to control framework

Convert tea575x-tuner to use the new V4L2 control framework. Also add
ext_init() callback that can be used by a card driver for additional
initialization right before registering the video device (for SF16-FMR2).

Also embed struct video_device to struct snd_tea575x to simplify the code.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] Fix compile warning: Dereferencing type-punned pointer will break strict...
Hans Petter Selasky [Mon, 23 May 2011 11:13:06 +0000]
[media] Fix compile warning: Dereferencing type-punned pointer will break strict-aliasing rules

Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] v4l: Document EACCES in VIDIOC_[GS]_CTRL and VIDIOC_{G, S, TRY}_EXT_CTRLS
Sakari Ailus [Sun, 15 May 2011 15:33:58 +0000]
[media] v4l: Document EACCES in VIDIOC_[GS]_CTRL and VIDIOC_{G, S, TRY}_EXT_CTRLS

VIDIOC_S_CTRL and VIDIOC_S_EXT_CTRLS return EACCES when setting a read-only
control VIDIOC_TRY_EXT_CTRLS when trying a read-only control and
VIDIOC_G_CTRL and VIDIOC_G_EXT_CTRLS when getting a write-only control.
Document this.

Signed-off-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] videobuf_pages_to_sg: sglist[0] length problem
Newson Edouard [Tue, 19 Apr 2011 14:54:54 +0000]
[media] videobuf_pages_to_sg: sglist[0] length problem

On function videobuf_pages_to_sg the statement sg_set_page(&sglist[0],
pages[0], PAGE_SIZE - offset, offset) will fail if size is less than
PAGE_SIZE.

Signed-off-by: Newson Edouard <newsondev@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] cx23885: restore flushes of cx23885_dev work items
Tejun Heo [Tue, 15 Feb 2011 09:20:12 +0000]
[media] cx23885: restore flushes of cx23885_dev work items

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] saa7164: poll mask set incorrectly
Dan Carpenter [Wed, 24 Nov 2010 05:36:57 +0000]
[media] saa7164: poll mask set incorrectly

list_first_entry() always returns non-null here.  I think the intent was
to test whether there were any entries in the used list.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] cxd2820r: correct missing error checks
Antti Palosaari [Wed, 25 May 2011 20:25:53 +0000]
[media] cxd2820r: correct missing error checks

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] Update several cardlists
Mauro Carvalho Chehab [Wed, 1 Jun 2011 13:23:53 +0000]
[media] Update several cardlists

Several cardlist entries are missed. Fix them by running some
script magic (about the same scripts we used to have at -hg tree).

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] em28xx: use the proper prefix for board names
Mauro Carvalho Chehab [Wed, 1 Jun 2011 13:16:25 +0000]
[media] em28xx: use the proper prefix for board names

All boards use EM28xxx_BOARD, to identify that the macro
refers to a card entry. So:

EM2874_LEADERSHIP_ISDBT -> EM2874_BOARD_LEADERSHIP_ISDBT

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] em28xx: correct PCTV nanoStick T2 290e device name
Antti Palosaari [Wed, 25 May 2011 20:03:50 +0000]
[media] em28xx: correct PCTV nanoStick T2 290e device name

PCTV Systems nanoStick T2 290e => PCTV nanoStick T2 290e

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] em28xx: add remote for PCTV nanoStick T2 290e
Antti Palosaari [Wed, 25 May 2011 20:00:35 +0000]
[media] em28xx: add remote for PCTV nanoStick T2 290e

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] em28xx: EM28174 remote support
Antti Palosaari [Wed, 25 May 2011 19:56:37 +0000]
[media] em28xx: EM28174 remote support

For some reason it repeats rather slowly, around 800ms intervals,
two RC5 remotes tested.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] cxd2820r: fix bitfields
Antti Palosaari [Wed, 25 May 2011 15:42:52 +0000]
[media] cxd2820r: fix bitfields

error: dubious one-bit signed bitfield

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] cxd2820r: malloc buffers instead of stack
Antti Palosaari [Wed, 25 May 2011 15:32:44 +0000]
[media] cxd2820r: malloc buffers instead of stack

kmalloc I2C buffers

Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] anysee: style issues, comments, etc
Antti Palosaari [Wed, 25 May 2011 21:30:09 +0000]
[media] anysee: style issues, comments, etc

Change some info, comments, variables. No functionality changes.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] anysee: add support for Anysee E7 PS2
Antti Palosaari [Wed, 25 May 2011 21:21:43 +0000]
[media] anysee: add support for Anysee E7 PS2

Basically it is just same device as Anysee E7 S2 but made for
internal PCI(e) slot and motherboard USB connector.

Cc: info@anysee.com
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] anysee: add support for Anysee E7 PTC
Antti Palosaari [Tue, 24 May 2011 10:57:34 +0000]
[media] anysee: add support for Anysee E7 PTC

Basically it is just same device as Anysee E7 TC but made for
internal PCI(e) slot and motherboard USB connector.

Cc: info@anysee.com
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] gspca - ov519: New sensor ov9600 with bridge ovfx2
Jean-François Moine [Mon, 23 May 2011 08:38:10 +0000]
[media] gspca - ov519: New sensor ov9600 with bridge ovfx2

This sensor was found in a webcam 8020:ef04 (SVC - SVU2-1.3MV PCCam).

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook: Move all media docbook stuff into its own directory
Mauro Carvalho Chehab [Tue, 31 May 2011 19:27:44 +0000]
[media] DocBook: Move all media docbook stuff into its own directory

This patch addresses several issues pointed by Randy Dunlap
<rdunlap@xenotime.net> at changeset ece722c:

- In the generated index.html file, "media" is listed first, but it
  should be listed in alphabetical order, not first.

- The generated files are (hidden) in .tmpmedia/

- The link from the top-level index.html file to "media" is to
  media/index.html, but the file is actually in .tmpmedia/media/index.html

- Please build docs with and without using "O=builddir" and test that.

- Would it be possible for media to have its own Makefile instead of
  merging into this one?

Due to the way cleandocs target works, I had to rename the media DocBook
to media_api, otherwise cleandocs would remove the /media directory.

Thanks-to: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] DocBook: Add rules to auto-generate some media docbook
Mauro Carvalho Chehab [Wed, 25 May 2011 15:24:48 +0000]
[media] DocBook: Add rules to auto-generate some media docbook

Auto-generate the videodev2.h.xml,frontend.h.xml and the indexes.

Some logic at the Makefile helps us to identify when a symbol is missing,
like for example:

Error: no ID for constraint linkend: V4L2-PIX-FMT-JPGL.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

8 years agoLinux 3.0
Linus Torvalds [Fri, 22 Jul 2011 02:17:23 +0000]
Linux 3.0

8 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Fri, 22 Jul 2011 00:20:57 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  sparc,kgdbts: fix compile regression with kgdb test suite

8 years agosparc,kgdbts: fix compile regression with kgdb test suite
Jason Wessel [Tue, 19 Jul 2011 20:43:16 +0000]
sparc,kgdbts: fix compile regression with kgdb test suite

Commit 63ab25ebbc (kgdbts: unify/generalize gdb breakpoint adjustment)
introduced a compile regression on sparc.

kgdbts.c: In function 'check_and_rewind_pc':
kgdbts.c:307: error: implicit declaration of function 'instruction_pointer_set'

Simply add the correct macro definition for instruction pointer on the
Sparc architecture.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: David S. Miller <davem@davemloft.net>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Thu, 21 Jul 2011 21:28:01 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  CIFS: Fix wrong length in cifs_iovec_read

8 years agoMerge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 21 Jul 2011 19:25:39 +0000]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Make Dell Latitude E6420 use reboot=pci
  x86: Make Dell Latitude E5420 use reboot=pci