7 years agoRevert "NFS: Ensure that writeback_single_inode() calls write_inode() when syncing"
Trond Myklebust [Tue, 18 Oct 2011 01:22:55 +0000]
Revert "NFS: Ensure that writeback_single_inode() calls write_inode() when syncing"

commit 59b7c05fffba030e5d9e72324691e2f99aa69b79 upstream.

This reverts commit b80c3cb628f0ebc241b02e38dd028969fb8026a2.

The reverted commit was rendered obsolete by a VFS fix: commit
5547e8aac6f71505d621a612de2fca0dd988b439 (writeback: Update dirty flags in
two steps). We now no longer need to worry about writeback_single_inode()
missing our marking the inode for COMMIT in 'do_writepages()' call.

Reverting this patch, fixes a performance regression in which the inode
would continuously get queued to the dirty list, causing the writeback
code to unnecessarily try to send a COMMIT.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agokmod: prevent kmod_loop_msg overflow in __request_module()
Jiri Kosina [Wed, 26 Oct 2011 02:40:39 +0000]
kmod: prevent kmod_loop_msg overflow in __request_module()

commit 37252db6aa576c34fd794a5a54fb32d7a8b3a07a upstream.

Due to post-increment in condition of kmod_loop_msg in __request_module(),
the system log can be spammed by much more than 5 instances of the 'runaway
loop' message if the number of events triggering it makes the kmod_loop_msg
to overflow.

Fix that by making sure we never increment it past the threshold.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopnfsblock: fix writeback deadlock
Peng Tao [Fri, 23 Sep 2011 01:50:17 +0000]
pnfsblock: fix writeback deadlock

commit 7542274519b3ba87555410c66e8356ac1e3bc9b3 upstream.

We should check if the sector is already initialized before
trying to grab the page from page cache. Otherwise when two
pages of the same block are written back by two threads each
calling from writepage_locked, it can cause deadlock like bellow.

 [ 1080.972099] INFO: task kswapd0:25 blocked for more than 120 seconds.
 [ 1080.972377] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 [ 1080.972812] kswapd0         D ffff88000c4926c0     0    25      2 0x00000000
 [ 1080.972816]  ffff88000df276b0 0000000000000046 ffff88000df27640 ffffffff81013ba7
 [ 1080.972821]  ffff88000c492310 ffff88000df27fd8 ffff88000df27fd8 00000000001d3440
 [ 1080.972824]  ffff88000c378000 ffff88000c492310 ffff8800175d3d40 ffff880017fc75a8
 [ 1080.972828] Call Trace:
 [ 1080.972860]  [<ffffffff81013ba7>] ? read_tsc+0x9/0x19
 [ 1080.972877]  [<ffffffff810e0b23>] ? lock_page+0x2b/0x2b
 [ 1080.972899]  [<ffffffff81475a1d>] io_schedule+0x63/0x7e
 [ 1080.972902]  [<ffffffff810e0b31>] sleep_on_page+0xe/0x12
 [ 1080.972905]  [<ffffffff81475fe8>] __wait_on_bit_lock+0x46/0x8f
 [ 1080.972916]  [<ffffffff810822d7>] ? lock_release_holdtime.part.7+0x6b/0x72
 [ 1080.972919]  [<ffffffff810e0af6>] __lock_page+0x66/0x68
 [ 1080.972928]  [<ffffffff81072705>] ? autoremove_wake_function+0x3d/0x3d
 [ 1080.972932]  [<ffffffff810e0b1f>] lock_page+0x27/0x2b
 [ 1080.972934]  [<ffffffff810e0bcf>] find_lock_page+0x34/0x57
 [ 1080.972937]  [<ffffffff810e1738>] find_or_create_page+0x34/0x8a
 [ 1080.972947]  [<ffffffffa034245b>] bl_write_pagelist+0x205/0x6da [blocklayoutdriver]
 [ 1080.972951]  [<ffffffffa034145d>] ? bl_free_lseg+0x38/0x38 [blocklayoutdriver]
 [ 1080.972995]  [<ffffffffa02e27b9>] ? nfs_write_rpcsetup+0x118/0x123 [nfs]
 [ 1080.973033]  [<ffffffffa030246b>] pnfs_generic_pg_writepages+0x10b/0x1f4 [nfs]
 [ 1080.973089]  [<ffffffffa02deaae>] nfs_pageio_doio+0x1a/0x43 [nfs]
 [ 1080.973098]  [<ffffffffa02df035>] nfs_pageio_complete+0x16/0x2d [nfs]
 [ 1080.973108]  [<ffffffffa02e2d8f>] nfs_writepage_locked+0xa0/0xbf [nfs]
 [ 1080.973119]  [<ffffffffa02e36a1>] nfs_writepage+0x16/0x2b [nfs]
 [ 1080.973122]  [<ffffffff810e8762>] ? clear_page_dirty_for_io+0x87/0x9a
 [ 1080.973133]  [<ffffffff810efc5b>] shrink_page_list+0x39b/0x6c8
 [ 1080.973139]  [<ffffffff810f03bb>] shrink_inactive_list+0x22c/0x39e
 [ 1080.973144]  [<ffffffff810822d7>] ? lock_release_holdtime.part.7+0x6b/0x72
 [ 1080.973148]  [<ffffffff810f0c33>] shrink_zone+0x445/0x588
 [ 1080.973152]  [<ffffffff810f1a11>] balance_pgdat+0x2c2/0x56b
 [ 1080.973170]  [<ffffffff81254208>] ? __bitmap_weight+0x34/0x80
 [ 1080.973175]  [<ffffffff810f1f78>] kswapd+0x2be/0x2fa
 [ 1080.973179]  [<ffffffff810726c8>] ? __init_waitqueue_head+0x4b/0x4b
 [ 1080.973183]  [<ffffffff810f1cba>] ? balance_pgdat+0x56b/0x56b
 [ 1080.973187]  [<ffffffff81071f69>] kthread+0xa8/0xb0
 [ 1080.973200]  [<ffffffff814806b4>] kernel_thread_helper+0x4/0x10
 [ 1080.973205]  [<ffffffff81071ec1>] ? __init_kthread_worker+0x5a/0x5a
 [ 1080.973210]  [<ffffffff814806b0>] ? gs_change+0x13/0x13
 [ 1080.973213] no locks held by kswapd0/25.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopnfsblock: fix NULL pointer dereference
Peng Tao [Fri, 23 Sep 2011 01:50:16 +0000]
pnfsblock: fix NULL pointer dereference

commit e6d05a757c314ad88d0649d3835a8a1daa964236 upstream.

bl_add_page_to_bio returns error pointer. bio should be reset to
NULL in failure cases as the out path always calls bl_submit_bio.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopnfs: recoalesce when ld read pagelist fails
Peng Tao [Fri, 23 Sep 2011 01:50:15 +0000]
pnfs: recoalesce when ld read pagelist fails

commit 9b7eecdcfeb943f130d86bbc249fde4994b6fe30 upstream.

For pnfs pagelist read failure, we need to pg_recoalesce and resend IO to
mds.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopnfs: recoalesce when ld write pagelist fails
Peng Tao [Fri, 23 Sep 2011 01:50:14 +0000]
pnfs: recoalesce when ld write pagelist fails

commit 8ce160c5ef06cc89c2b6b26bfa5ef7a5ce2c93e0 upstream.

For pnfs pagelist write failure, we need to pg_recoalesce and resend IO to
mds.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopnfs: make _set_lo_fail generic
Peng Tao [Fri, 23 Sep 2011 01:50:12 +0000]
pnfs: make _set_lo_fail generic

commit 1b0ae068779874f54b55aac3a2a992bcf3f2c3c4 upstream.

file layout and block layout both use it to set mark layout io failure
bit. So make it generic.

Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopnfsblock: add missing rpc_put_mount and path_put
Peng Tao [Fri, 23 Sep 2011 01:50:11 +0000]
pnfsblock: add missing rpc_put_mount and path_put

commit 760383f1ee4d14b0e0bdf0cddee648d9b8633429 upstream.

Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Peng Tao <peng_tao@emc.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopnfsblock: fix size of upcall message
Jim Rees [Fri, 23 Sep 2011 01:50:09 +0000]
pnfsblock: fix size of upcall message

commit fdc17abbc4b6094b34ee8ff5d91eaba8637594a2 upstream.

Make the status field explicitly 32 bits.  "...it's unlikely that the kernel
and userspace would differ on the size of an int here, but it might be a
good idea to go ahead and make that explicitly 32 bits in case we end up
dealing with more exotic arches at some point in the future."

Suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopnfsblock: fix return code confusion
Jim Rees [Fri, 23 Sep 2011 01:50:08 +0000]
pnfsblock: fix return code confusion

commit 516f2e24faa7548a61d9ba790958528469c2e284 upstream.

Always return PTR_ERR, not NULL, from nfs4_blk_get_deviceinfo and
nfs4_blk_decode_device.

Check for IS_ERR, not NULL, in bl_set_layoutdriver when calling
nfs4_blk_get_deviceinfo.

Signed-off-by: Jim Rees <rees@umich.edu>
Signed-off-by: Benny Halevy <bhalevy@tonian.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoPlatform: Fix error path in samsung-laptop init
David Herrmann [Tue, 20 Sep 2011 16:16:12 +0000]
Platform: Fix error path in samsung-laptop init

commit a7ea19926ffba86f373f6050a106cd162dbb9a78 upstream.

samsung_init() should not return success if not all devices are initialized.
Otherwise, samsung_exit() will dereference sdev NULL pointers and others.

Signed-off-by: David Herrmann <dh.herrmann@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agoplatform: samsung_laptop: fix samsung brightness min/max calculations
Jason Stubbs [Tue, 20 Sep 2011 16:16:11 +0000]
platform: samsung_laptop: fix samsung brightness min/max calculations

commit bee460be8c691c544e84ed678280ace6153104c6 upstream.

The min_brightness value of the sabi_config is incorrectly used in brightness
calculations. For the config where min_brightness = 1 and max_brightness = 8,
the user visible range should be 0 to 7 with hardware being set in the range
of 1 to 8. What is actually happening is that the user visible range is 0 to
8 with hardware being set in the range of -1 to 7.

This patch fixes the above issue as well as a miscalculation that would occur
in the case of min_brightness > 1.

Signed-off-by: Jason Stubbs <jasonbstubbs@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agoPlatform: samsung_laptop: samsung backlight for R528/R728
Smelov Andrey [Tue, 20 Sep 2011 16:16:10 +0000]
Platform: samsung_laptop: samsung backlight for R528/R728

commit 093ed561648d43263c009ea88abab21a31cd4f1d upstream.

patch works for me, but I need to add "acpi_backlight=vendor" to kernel
params

Signed-off-by: Smelov Andrey <xor29a@bk.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agoPlatform: samsung_laptop: add support for X520 machines.
Tommaso Massimi [Tue, 20 Sep 2011 16:16:09 +0000]
Platform: samsung_laptop: add support for X520 machines.

commit 7500eeb08a179e61a4219288c21407d63d1e9c64 upstream.

my samsung laptop would be very happy if you add
these lines to the file drivers/platform/x86/samsung-laptop.c

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agoplatform: samsung_laptop: add dmi information for Samsung R700 laptops
Stefan Beller [Tue, 20 Sep 2011 16:16:08 +0000]
platform: samsung_laptop: add dmi information for Samsung R700 laptops

commit f87d02996f05ec1789ceecce9ec839f629b7aa80 upstream.

My DMI model is this:
>dmesg |grep DMI
[    0.000000] DMI present.
[    0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. SR700/SR700, BIOS
04SR 02/20/2008

adding dmi information of Samsung R700 laptops
This adds the dmi information of Samsungs R700 laptops.

Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agocaif: Fix BUG() with network namespaces
David Woodhouse [Mon, 24 Oct 2011 21:25:21 +0000]
caif: Fix BUG() with network namespaces

commit 08613e4626c06ca408fc55071f6aedee36986a87 upstream.

The caif code will register its own pernet_operations, and then register
a netdevice_notifier. Each time the netdevice_notifier is triggered,
it'll do some stuff... including a lookup of its own pernet stuff with
net_generic().

If the net_generic() call ever returns NULL, the caif code will BUG().
That doesn't seem *so* unreasonable, I suppose — it does seem like it
should never happen.

However, it *does* happen. When we clone a network namespace,
setup_net() runs through all the pernet_operations one at a time. It
gets to loopback before it gets to caif. And loopback_net_init()
registers a netdevice... while caif hasn't been initialised. So the caif
netdevice notifier triggers, and immediately goes BUG().

We could imagine a complex and overengineered solution to this generic
class of problems, but this patch takes the simple approach. It just
makes caif_device_notify() *not* go looking for its pernet data
structures if the device it's being notified about isn't a caif device
in the first place.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Acked-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agokobj_uevent: Ignore if some listeners cannot handle message
Milan Broz [Mon, 22 Aug 2011 13:51:34 +0000]
kobj_uevent: Ignore if some listeners cannot handle message

commit ebf4127cd677e9781b450e44dfaaa1cc595efcaa upstream.

kobject_uevent() uses a multicast socket and should ignore
if one of listeners cannot handle messages or nobody is
listening at all.

Easily reproducible when a process in system is cloned
with CLONE_NEWNET flag.

(See also http://article.gmane.org/gmane.linux.kernel.device-mapper.dm-crypt/5256)

Signed-off-by: Milan Broz <mbroz@redhat.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoums_realtek: do not use stack memory for DMA
Adam Cozzette [Wed, 24 Aug 2011 18:22:37 +0000]
ums_realtek: do not use stack memory for DMA

commit 065e60964e293227e4feb0c1f7e27e609316ed9a upstream.

This patch changes rts51x_read_mem, rts51x_write_mem, and rts51x_read_status to
allocate temporary buffers with kmalloc. This way stack addresses are not used
for DMA when these functions call rts51x_bulk_transport.

Signed-off-by: Adam Cozzette <acozzette@cs.hmc.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxen-swiotlb: Fix wrong panic.
Konrad Rzeszutek Wilk [Fri, 22 Jul 2011 16:51:48 +0000]
xen-swiotlb: Fix wrong panic.

commit ab2a47bd242d6cdcf6b2b64797f271c6f0a6d338 upstream.

Propagate the baremetal git commit "swiotlb: fix wrong panic"
(fba99fa38b023224680308a482e12a0eca87e4e1) in the Xen-SWIOTLB version.
wherein swiotlb's map_page wrongly calls panic() when it can't find
a buffer fit for device's dma mask.  It should return an error instead.

Devices with an odd dma mask (i.e.  under 4G) like b44 network card hit
this bug (the system crashes):

http://marc.info/?l=linux-kernel&m=129648943830106&w=2

If xen-swiotlb returns an error, b44 driver can use the own bouncing
mechanism.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxen-pcifront: Update warning comment to use 'e820_host' option.
Konrad Rzeszutek Wilk [Fri, 22 Jul 2011 16:18:43 +0000]
xen-pcifront: Update warning comment to use 'e820_host' option.

commit 917e3e65c35459d52f0d0b890aa5df0cad07a051 upstream.

With Xen changeset 23428 "libxl: Add 'e820_host' option to config file"
the E820 as seen from the host can now be passed into the guest.
This means that a PV guest can now:
 - Use the correct PCI I/O gap. Before these patches, Linux guest would
   boot up and would tell:
   [    0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000)
   while in actuality the PCI I/O gap should have been:
   [    0.000000] Allocating PCI resources starting at b0000000 (gap: b0000000:4c000000)

 - The PV domain with PCI devices was limited to 3GB. It now can be booted
   with 4GB, 8GB, or whatever number you want. The PCI devices will now _not_ conflict
   with System RAM. Meaning the drivers can load.

CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: linux-pci@vger.kernel.org
[v2: Made the string less broken up. Suggested by Joe Perches]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUpdate email address for stable patch submission
Josh Boyer [Tue, 18 Oct 2011 01:16:39 +0000]
Update email address for stable patch submission

commit 5fa224295f0e0358c8bc0e5390702338df889def upstream.

The stable@kernel.org email address has been replaced with the
stable@vger.kernel.org mailing list.  Change the stable kernel rules to
reference the new list instead of the semi-defunct email alias.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoARM: smp: fix clipping of number of CPUs
Russell King [Thu, 20 Oct 2011 21:04:18 +0000]
ARM: smp: fix clipping of number of CPUs

commit a06f916b7a9b57447ceb875eb0a89f1a66b31bca upstream.

Rather than clipping the number of CPUs using the compile-time NR_CPUS
constant, use the runtime nr_cpu_ids value instead.  This allows the
nr_cpus command line option to work as expected.

Reported-by: Mark Salter <msalter@redhat.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoQE/FHCI: fixed the CONTROL bug
Jerry Huang [Tue, 18 Oct 2011 05:09:48 +0000]
QE/FHCI: fixed the CONTROL bug

commit 273d23574f9dacd9c63c80e7d63639a669aad441 upstream.

For USB CONTROL transaction, when the data length is zero,
the IN package is needed to finish this transaction in status stage.

Signed-off-by: Jerry Huang <r66093@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoHID: ACRUX - fix enabling force feedback support
Sergei Kolzun [Thu, 4 Aug 2011 07:25:56 +0000]
HID: ACRUX - fix enabling force feedback support

commit 364b936fc38dec7653c690d710e10657af235a36 upstream.

The config option needs to be a 'bool' and not a tristate, otheriwse
force feedback support never makes it into the module.

Signed-off-by: Sergei Kolzun <x0r@dv-life.ru>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: add quirk for Logitech C300 web cam
Jon Levell [Thu, 29 Sep 2011 19:42:52 +0000]
USB: add quirk for Logitech C300 web cam

commit 5b253d88cc6c65a23cefc457a5a4ef139913c5fc upstream.

My webcam is a Logitech C300 and I get "chipmunk"ed squeaky sound.
The following trivial patch fixes it.

Signed-off-by: Jon Levell <linuxusb@coralbark.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoath9k: disable unnecessary PHY error reporting
Felix Fietkau [Sat, 8 Oct 2011 13:49:57 +0000]
ath9k: disable unnecessary PHY error reporting

commit ac06697c79bad09e44a8b1d52104014016fb90de upstream.

PHY errors relevant for ANI are always tracked by hardware counters, the
bits that allow them to pass through the rx filter are independent of that.
Enabling PHY errors in the rx filter often creates lots of useless DMA traffic
and might be responsible for some of the rx dma stop failure warnings.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoath9k_hw: Fix number of GPIO pins for AR9287/9300
Mohammed Shafi Shajakhan [Fri, 30 Sep 2011 06:01:27 +0000]
ath9k_hw: Fix number of GPIO pins for AR9287/9300

commit 6321eb0977b011ac61dfca36e7c69b2c4325b104 upstream.

this patch fixes the assumption of maximum number of GPIO pins present
in AR9287/AR9300. this fix is essential as we might encounter some
functionality issues involved in accessing the status of GPIO pins which
are all incorrectly assumed to be not within the range of max_num_gpio
of AR9300/AR9287 chipsets

Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoath9k_htc: add AVM FRITZ!WLAN 11N v2 support
Luis R. Rodriguez [Thu, 29 Sep 2011 17:42:19 +0000]
ath9k_htc: add AVM FRITZ!WLAN 11N v2 support

commit 8c34559b4a6df32e4af1b073397fa4dc189a5485 upstream.

This was reported and tested by Martin Walter over at AVM GmbH Berlin.
This also applies to 3.0.1 so sendint to stable.

Cc: s.kirste@avm.de
Cc: d.friedel@avm.de
Cc: Martin Walter <m.walter@avm.de>
Cc: Peter Grabienski <pgrabien@qca.qualcomm.com>
Tested-by: Martin Walter <m.walter@avm.de>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoath9k_hw: Fix magnitude/phase coeff correction
Rajkumar Manoharan [Thu, 15 Sep 2011 13:32:25 +0000]
ath9k_hw: Fix magnitude/phase coeff correction

commit e9c10469cf3c71bc1c6b0f01319161e277d6ac9b upstream.

Do the magnitude/phase coeff correction only if the outlier
is detected. Updating wrong magnitude/phase coeff factor
impacts not only tx gain setting but also leads to poor
performance in congested networks. In the clear environment
the impact is very minimal because the outlier happens
very rarely according to the past experiment. It occured
less than once every 1000 calibrations.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoath9k_hw: Fix descriptor status of TxOpExceeded
Rajkumar Manoharan [Sat, 20 Aug 2011 11:52:09 +0000]
ath9k_hw: Fix descriptor status of TxOpExceeded

commit 2a15b394f8e46dd3e2ab365ab41cfa701d92fa77 upstream.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoMAINTANERS: update Qualcomm Atheros addresses
Luis R. Rodriguez [Tue, 23 Aug 2011 22:07:31 +0000]
MAINTANERS: update Qualcomm Atheros addresses

commit fe8e084455f273b32cc57a5fbaf6c22ef984d657 upstream.

Qualcomm ate up Atheros, all of the old e-mail addresses
no longer work and e-mails sent to it will bounce. Update
the addresses to the new shiny Qualcomm Atheros (QCA) ones.

Cc: stable@kernel.org
Cc: netdev@vger.kernel.org
Cc: jouni@qca.qualcomm.com
Cc: yangjie@qca.qualcomm.com
Cc: vthiagar@qca.qualcomm.com
Cc: senthilb@qca.qualcomm.com
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: option: add various ZTE device network interfaces to the blacklist
Dan Williams [Tue, 13 Sep 2011 18:52:52 +0000]
USB: option: add various ZTE device network interfaces to the blacklist

commit c58a76cdd7ab5a945a44fd2d64f6faf40323f95b upstream.

IDs found in the Windows driver's ZTEusbnet.inf file from the
ZTE MF100 drivers (O2 UK).  Also fixes the ZTE MF626 device
since it really is distinct from the 4G Systems stick and
apparently needs the net interface blacklisted too, while
there's no indication (yet) that the 4G Systems stick does.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: option: add ZTE product 0x0037 to sendsetup blacklist
Dan Williams [Tue, 13 Sep 2011 18:51:45 +0000]
USB: option: add ZTE product 0x0037 to sendsetup blacklist

commit eb05ce567a81c592c58f4bdb96eb91ce96661c30 upstream.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: option: convert Huawei K3765, K4505, K4605 reservered interface to blacklist
Dan Williams [Tue, 13 Sep 2011 18:51:13 +0000]
USB: option: convert Huawei K3765, K4505, K4605 reservered interface to blacklist

commit 0d905fd5ece4ab65e8407c450077744e1c8f661b upstream.

That's what the blacklist is for...

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: option: convert interface blacklisting to bitfields
Dan Williams [Tue, 13 Sep 2011 18:49:41 +0000]
USB: option: convert interface blacklisting to bitfields

commit b4626c10928c13ee73b013dcbc23676333e79b59 upstream.

It's cleaner than the array stuff, and we're about to add a bunch
more blacklist entries.  Second, there are devices that need both
the sendsetup and the reserved interface blacklists, which the
current code can't accommodate.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board
Peter Stuge [Mon, 10 Oct 2011 01:34:54 +0000]
USB: ftdi_sio: Support TI/Luminary Micro Stellaris BD-ICDI Board

commit 3687f641307eeff6f7fe31a88dc39db88e89238b upstream.

Some Stellaris evaluation kits have the JTAG/SWD FTDI chip onboard,
and some, like EK-LM3S9B90, come with a separate In-Circuit Debugger
Interface Board. The ICDI board can also be used stand-alone, for
other boards and chips than the kit it came with. The ICDI has both
old style 20-pin JTAG connector and new style JTAG/SWD 10-pin 1.27mm
pitch connector.

Tested with EK-LM3S9B90, where the BD-ICDI board is included.

Signed-off-by: Peter Stuge <peter@stuge.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: ftdi_sio: add PID for Sony Ericsson Urban
Hakan Kvist [Mon, 3 Oct 2011 11:41:15 +0000]
USB: ftdi_sio: add PID for Sony Ericsson Urban

commit 74bdf22b5c3858b06af46f19d05c23e76c40a3bb upstream.

Add PID 0xfc8a, 0xfc8b for device Sony Ericsson Urban

Signed-off-by: Hakan Kvist <hakan.kvist@sonyericsson.com>
Signed-off-by: Oskar Andero <oskar.andero@sonyericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: pl2303: add id for SMART device
Eric Benoit [Sat, 24 Sep 2011 06:04:50 +0000]
USB: pl2303: add id for SMART device

commit 598f0b703506da841d3459dc0c48506be14d1778 upstream.

Add vendor and product ID for the SMART USB to serial adapter. These
were meant to be used with their SMART Board whiteboards, but can be
re-purposed for other tasks. Tested and working (at at least 9600 bps).

Signed-off-by: Eric Benoit <eric@ecks.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: add RESET_RESUME for webcams shown to be quirky
Oliver Neukum [Tue, 13 Sep 2011 06:42:21 +0000]
USB: add RESET_RESUME for webcams shown to be quirky

commit 2394d67e446bf616a0885167d5f0d397bdacfdfc upstream.

The new runtime PM code has shown that many webcams suffer
from a race condition that may crash them upon resume.
Runtime PM is especially prone to show the problem because
it retains power to the cameras at all times. However
system suspension may also crash the devices and retain
power to the devices.
The only way to solve this problem without races is in
usbcore with the RESET_RESUME quirk.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousb: cdc-acm: Owen SI-30 support
Denis Pershin [Sun, 4 Sep 2011 10:37:21 +0000]
usb: cdc-acm: Owen SI-30 support

commit 65e52f41fa944cef2e6d4222b8c54f46cc575214 upstream.

here is the patch to support Owen SI-30 device.
This is a pulse counter controller.
http://www.owen.ru/en/catalog/93788515

usb-drivers output:
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=02(commc) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=03eb ProdID=0030 Rev=01.01
C:  #Ifs= 2 Cfg#= 1 Atr=c0 MxPwr=0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=02 Prot=00 Driver=cdc_acm
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm

This patch is installed on my home system which receives data from this
controller connected to cold water counter.

Signed-off-by: Denis Pershin <dyp@perchine.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: pid_ns: ensure pid is not freed during kill_pid_info_as_uid
Serge Hallyn [Mon, 26 Sep 2011 15:18:29 +0000]
USB: pid_ns: ensure pid is not freed during kill_pid_info_as_uid

commit aec01c5895051849ed842dc5b8794017a7751f28 upstream.

Alan Stern points out that after spin_unlock(&ps->lock) there is no
guarantee that ps->pid won't be freed.  Since kill_pid_info_as_uid() is
called after the spin_unlock(), the pid passed to it must be pinned.

Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousb/core/devio.c: Check for printer class specific request
Matthias Dellweg [Sun, 25 Sep 2011 12:26:25 +0000]
usb/core/devio.c: Check for printer class specific request

commit 393cbb5151ecda9f9e14e3082d048dd27a1ff9f6 upstream.

In the usb printer class specific request get_device_id the value of
wIndex is (interface << 8 | altsetting) instead of just interface.
This enables the detection of some printers with libusb.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Matthias Dellweg <2500@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: g_printer: fix bug in unregistration
Fabian Godehardt [Thu, 1 Sep 2011 12:15:46 +0000]
USB: g_printer: fix bug in unregistration

commit 8582d86143c690c68cc42f996def466a035bee34 upstream.

The allocated chardevice region range is only 1 device but on
unregister it currently tries to deregister 2.

Found this while doing a insmod/rmmod/insmod/rm... of the module
which seemed to eat major numbers.

Signed-off-by: Fabian Godehardt <fg@emlix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: Fix runtime wakeup on OHCI
Matthew Garrett [Thu, 6 Oct 2011 19:35:43 +0000]
USB: Fix runtime wakeup on OHCI

commit a8b43c00ef06aec49b9fe0a5bad8a6a320e4d27b upstream.

At least some OHCI hardware (such as the MCP89) fails to flag any change
in the host status register or the port status registers when receiving
a remote wakeup while in D3 state. This results in the controller being
resumed but no device state change being noticed, at which point the
controller is put back to sleep again. Since there doesn't seem to be any
reliable way to identify the state change, just unconditionally resume the
hub. It'll be put back to sleep in the near future anyway if there are no
active devices attached to it.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: storage: Use normalized sense when emulating autosense
Luben Tuikov [Thu, 11 Nov 2010 23:43:11 +0000]
USB: storage: Use normalized sense when emulating autosense

commit e16da02fcdf1c5e824432f88abf42623dafdf191 upstream.

This patch solves two things:
1) Enables autosense emulation code to correctly
interpret descriptor format sense data, and
2) Fixes a bug whereby the autosense emulation
code would overwrite descriptor format sense data
with SENSE KEY HARDWARE ERROR in fixed format, to
incorrectly look like this:

Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc]  Sense Key : Recovered Error [current] [descriptor]
Oct 21 14:11:07 localhost kernel: Descriptor sense data with sense descriptors (in hex):
Oct 21 14:11:07 localhost kernel:        72 01 04 1d 00 00 00 0e 09 0c 00 00 00 00 00 00
Oct 21 14:11:07 localhost kernel:        00 4f 00 c2 00 50
Oct 21 14:11:07 localhost kernel: sd 7:0:0:0: [sdc]  ASC=0x4 ASCQ=0x1d

Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousb-storage: fix realtek cr configuration
Vincent Palatin [Thu, 1 Sep 2011 21:05:15 +0000]
usb-storage: fix realtek cr configuration

commit 839f245f8f1e7d7efd7ba12a7d735f13e8293a2b upstream.

A typo in the configuration variable name prevents from activating the
USB autosuspend on the device.

Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousbmon vs. tcpdump: fix dropped packet count
Johannes Stezenbach [Thu, 8 Sep 2011 13:39:15 +0000]
usbmon vs. tcpdump: fix dropped packet count

commit 236c448cb6e7f82096101e1ace4b77f8b38f82c8 upstream.

Report the number of dropped packets instead of zero
when using the binary usbmon interface with tcpdump.

# tcpdump -i usbmon1 -w dump
tcpdump: listening on usbmon1, link-type USB_LINUX_MMAPPED (USB with padded Linux header), capture size 65535 bytes
^C2155 packets captured
2155 packets received by filter
1019 packets dropped by kernel

Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotarget: Re-org of core_tmr_lun_reset
Nicholas Bellinger [Thu, 29 Sep 2011 04:37:29 +0000]
target: Re-org of core_tmr_lun_reset

commit d050ffb922c782f092234611b9019e95024481ab upstream.

This patch is a re-orginzation of core_tmr_lun_reset() logic to properly
scan the active tmr_list, dev->state_task_list and qobj->qobj_list w/ the
relivent locks held, and performing a list_move_tail onto seperate local
scope lists before performing the full drain.

This involves breaking out the code into three seperate list specific
functions: core_tmr_drain_tmr_list(), core_tmr_drain_task_list() and
core_tmr_drain_cmd_list().

(nab: Include target: Remove non-active tasks from execute list during
      LUN_RESET patch to address original breakage)

Reported-by: Roland Dreier <roland@purestorage.com>
Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoleds: turn the blink_timer off before starting to blink
Antonio Ospite [Tue, 1 Nov 2011 00:12:22 +0000]
leds: turn the blink_timer off before starting to blink

commit 488bc35bf40df89d37486c1826b178a2fba36ce7 upstream.

Depending on the implementation of the hardware blinking function in
blink_set(), the led can support hardware blinking for some values of
delay_on and delay_off and fall-back to software blinking for some other
values.

Turning off the blink_timer unconditionally before starting to blink
make sure that a sequence like:

  OFF
  hardware blinking
  software blinking
  hardware blinking

does not leave the software blinking timer active.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoleds: save the delay values after a successful call to blink_set()
Antonio Ospite [Tue, 1 Nov 2011 00:12:19 +0000]
leds: save the delay values after a successful call to blink_set()

commit 6123b0e274503a0d3588e84fbe07c9aa01bfaf5d upstream.

When calling the hardware blinking function implemented by blink_set(),
the delay_on and delay_off values are not preserved across calls.

Fix that and make the "timer" trigger work as expected when hardware
blinking is available.

BEFORE the fix:
  $ cd /sys/class/leds/someled
  $ echo timer > trigger
  $ cat delay_on delay_off
  0
  0
  $ echo 100 > delay_on
  $ cat delay_on delay_off
  0
  0
  $ echo 100 > delay_off
  $ cat delay_on delay_off
  0
  0

AFTER the fix:
  $ cd /sys/class/leds/someled
  $ echo timer > trigger
  $ cat delay_on delay_off
  0
  0
  $ echo 100 > delay_on
  $ cat delay_on delay_off
  100
  0
  $ echo 100 > delay_off
  $ cat delay_on delay_off
  100
  100

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoepoll: fix spurious lockdep warnings
Nelson Elhage [Tue, 1 Nov 2011 00:13:14 +0000]
epoll: fix spurious lockdep warnings

commit d8805e633e054c816c47cb6e727c81f156d9253d upstream.

epoll can acquire recursively acquire ep->mtx on multiple "struct
eventpoll"s at once in the case where one epoll fd is monitoring another
epoll fd.  This is perfectly OK, since we're careful about the lock
ordering, but it causes spurious lockdep warnings.  Annotate the recursion
using mutex_lock_nested, and add a comment explaining the nesting rules
for good measure.

Recent versions of systemd are triggering this, and it can also be
demonstrated with the following trivial test program:

--------------------8<--------------------

int main(void) {
   int e1, e2;
   struct epoll_event evt = {
       .events = EPOLLIN
   };

   e1 = epoll_create1(0);
   e2 = epoll_create1(0);
   epoll_ctl(e1, EPOLL_CTL_ADD, e2, &evt);
   return 0;
}
--------------------8<--------------------

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Nelson Elhage <nelhage@nelhage.com>
Acked-by: Jason Baron <jbaron@redhat.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agox86: Fix compilation bug in kprobes' twobyte_is_boostable
Josh Stone [Mon, 24 Oct 2011 17:15:51 +0000]
x86: Fix compilation bug in kprobes' twobyte_is_boostable

commit 315eb8a2a1b7f335d40ceeeb11b9e067475eb881 upstream.

When compiling an i386_defconfig kernel with gcc-4.6.1-9.fc15.i686, I
noticed a warning about the asm operand for test_bit in kprobes'
can_boost.  I discovered that this caused only the first long of
twobyte_is_boostable[] to be output.

Jakub filed and fixed gcc PR50571 to correct the warning and this output
issue.  But to solve it for less current gcc, we can make kprobes'
twobyte_is_boostable[] non-const, and it won't be optimized out.

Before:

CC arch/x86/kernel/kprobes.o
  In file included from include/linux/bitops.h:22:0,
                   from include/linux/kernel.h:17,
                   from [...]/arch/x86/include/asm/percpu.h:44,
                   from [...]/arch/x86/include/asm/current.h:5,
                   from [...]/arch/x86/include/asm/processor.h:15,
                   from [...]/arch/x86/include/asm/atomic.h:6,
                   from include/linux/atomic.h:4,
                   from include/linux/mutex.h:18,
                   from include/linux/notifier.h:13,
                   from include/linux/kprobes.h:34,
                   from arch/x86/kernel/kprobes.c:43:
  [...]/arch/x86/include/asm/bitops.h: In function ‘can_boost.part.1’:
  [...]/arch/x86/include/asm/bitops.h:319:2: warning: use of memory input
        without lvalue in asm operand 1 is deprecated [enabled by default]

  $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt
       551: 0f a3 05 00 00 00 00  bt     %eax,0x0
                          554: R_386_32 .rodata.cst4

  $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o

  arch/x86/kernel/kprobes.o:     file format elf32-i386

  Contents of section .data:
   0000 48000000 00000000 00000000 00000000  H...............
  Contents of section .rodata.cst4:
   0000 4c030000                             L...

Only a single long of twobyte_is_boostable[] is in the object file.

After, without the const on twobyte_is_boostable:

  $ objdump -rd arch/x86/kernel/kprobes.o | grep -A1 -w bt
       551: 0f a3 05 20 00 00 00  bt     %eax,0x20
                          554: R_386_32 .data

  $ objdump -s -j .rodata.cst4 -j .data arch/x86/kernel/kprobes.o

  arch/x86/kernel/kprobes.o:     file format elf32-i386

  Contents of section .data:
   0000 48000000 00000000 00000000 00000000  H...............
   0010 00000000 00000000 00000000 00000000  ................
   0020 4c030000 0f000200 ffff0000 ffcff0c0  L...............
   0030 0000ffff 3bbbfff8 03ff2ebb 26bb2e77  ....;.......&..w

Now all 32 bytes are output into .data instead.

Signed-off-by: Josh Stone <jistone@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agox86: uv2: Workaround for UV2 Hub bug (system global address format)
Jack Steiner [Tue, 20 Sep 2011 20:55:04 +0000]
x86: uv2: Workaround for UV2 Hub bug (system global address format)

commit 6a469e4665bc158599de55d64388861d0a9f10f4 upstream.

This is a workaround for a UV2 hub bug that affects the format of system
global addresses.

The GRU API for UV2 was inadvertently broken by a hardware change.  The
format of the physical address used for TLB dropins and for addresses used
with instructions running in unmapped mode has changed.  This change was
not documented and became apparent only when diags failed running on
system simulators.

For UV1, TLB and GRU instruction physical addresses are identical to
socket physical addresses (although high NASID bits must be OR'ed into the
address).

For UV2, socket physical addresses need to be converted.  The NODE portion
of the physical address needs to be shifted so that the low bit is in bit
39 or bit 40, depending on an MMR value.

It is not yet clear if this bug will be fixed in a silicon respin.  If it
is fixed, the hub revision will be incremented & the workaround disabled.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotarget: Fix REPORT TARGET PORT GROUPS handling with small allocation length
Nicholas Bellinger [Wed, 19 Oct 2011 06:48:04 +0000]
target: Fix REPORT TARGET PORT GROUPS handling with small allocation length

commit 6b20fa9aaf0c2f69ee6f9648e20ab2be0206705e upstream.

This patch fixes a bug with the handling of REPORT TARGET PORT GROUPS
containing a smaller allocation length than the payload requires causing
memory writes beyond the end of the buffer.  This patch checks for the
minimum 4 byte length for the response payload length, and also checks
upon each loop of T10_ALUA(su_dev)->tg_pt_gps_list to ensure the Target
port group and Target port descriptor list is able to fit into the
remaining allocation length.

If the response payload exceeds the allocation length length, then rd_len
is still increments to indicate to the initiator that the payload has
been truncated.

Reported-by: Roland Dreier <roland@purestorage.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotarget: Prevent TRANSPORT_FREE_CMD_INTR processing in core_tmr_drain_cmd_list
Nicholas Bellinger [Tue, 11 Oct 2011 06:02:48 +0000]
target: Prevent TRANSPORT_FREE_CMD_INTR processing in core_tmr_drain_cmd_list

commit b0e062aec578c756d1aea4b5809294488366a6e8 upstream.

This patch contains a bugfix for TMR LUN_RESET related to TRANSPORT_FREE_CMD_INTR
operation, where core_tmr_drain_cmd_list() will now skip processing for this
case to prevent an ABORT_TASK status from being returned for descriptors that
are already queued up to be released by processing thread context.

Cc: Roland Dreier <roland@purestorage.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotarget: Prevent transport_send_task_abort when CHECK_CONDITION status
Nicholas Bellinger [Thu, 29 Sep 2011 21:22:13 +0000]
target: Prevent transport_send_task_abort when CHECK_CONDITION status

commit c252f003470a99d319db4ebd12f4a9e4710a65db upstream.

This patch fixes a bug where transport_send_task_abort() could be called
during LUN_RESET to return SAM_STAT_TASK_ABORTED + tfo->queue_status(), when
SCF_SENT_CHECK_CONDITION -> tfo->queue_status() has already been sent from
within another context via transport_send_check_condition_and_sense().

Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotarget: Fix transport_cmd_finish_abort queue removal bug
Nicholas Bellinger [Thu, 29 Sep 2011 08:01:35 +0000]
target: Fix transport_cmd_finish_abort queue removal bug

commit 77039d1eafbbc192df71ee84b157b8973766737d upstream.

This patch fixes a bug in LUN_RESET operation with transport_cmd_finish_abort()
where transport_remove_cmd_from_queue() was incorrectly being called, causing
descriptors with t_state == TRANSPORT_FREE_CMD_INTR to be incorrectly removed
from qobj->qobj_list during process context release.  This change ensures the
descriptor is only removed via transport_remove_cmd_from_queue() when doing a
direct release via transport_generic_remove().

Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotarget: Prevent cmd->se_queue_node double add
Roland Dreier [Thu, 29 Sep 2011 05:12:07 +0000]
target: Prevent cmd->se_queue_node double add

commit 79a7fef26431830e22e282053d050af790117db8 upstream.

This patch addresses a bug with the lio-core-2.6.git conversion of
transport_add_cmd_to_queue() to use a single embedded list_head, instead
of individual struct se_queue_req allocations allowing a single se_cmd to
be added to the queue mulitple times.  This was changed in the following:

commit 2a9e4d5ca5d99f4c600578d6285d45142e7e5208
Author: Andy Grover <agrover@redhat.com>
Date:   Tue Apr 26 17:45:51 2011 -0700

    target: Embed qr in struct se_cmd

The problem is that some target code still assumes performing multiple
adds is allowed via transport_add_cmd_to_queue(), which ends up causing
list corruption in qobj->qobj_list code.  This patch addresses this
by removing an existing struct se_cmd from the list before the add, and
removes an unnecessary list walk in transport_remove_cmd_from_queue()

It also changes cmd->t_transport_queue_active to use explict sets intead
of increment/decrement to prevent confusion during exception path handling.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@risingtidesystems.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: HDA: Add new revision for ALC662
David Henningsson [Tue, 18 Oct 2011 12:07:51 +0000]
ALSA: HDA: Add new revision for ALC662

commit cc667a72d471e79fd8e5e291ea115923cf44dca0 upstream.

The revision 0x100300 was found for ALC662. It seems to work well
with patch_alc662.

BugLink: http://bugs.launchpad.net/bugs/877373
Tested-by: Shengyao Xue <Shengyao.xue@canonical.com>
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Acked-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Keep EAPD turned on for old Conexant chips
Takashi Iwai [Fri, 14 Oct 2011 13:22:34 +0000]
ALSA: hda - Keep EAPD turned on for old Conexant chips

commit 254f296840b64b034a4c850d45dbde7c040f0819 upstream.

In the old Conexant chips (5045, 5047, 5051 and 5066), a single EAPD
may handle both headphone and speaker outputs while it's assigned only
to one of them.  Turning off dynamically leads to the unexpected silent
output in such a configuration with the auto-mute function.

Since it's difficult to know how the EAPD is handled in the actual h/w
implementation, better to keep EAPD on while running for such codecs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Remove bad code for IDT 92HD83 family patch
Charles Chin [Thu, 13 Oct 2011 05:54:09 +0000]
ALSA: hda - Remove bad code for IDT 92HD83 family patch

commit 6c5c04e509b7000617b09d4301f0b9b6d171d1e6 upstream.

The purpose of this patch is to remove a section of "bad" code that
assigns the last DAC to ports E or F in order to support notebooks
with docking in earlier days, around ALSA 1.0.19 - 21.  This is not
necessary now and actually breaks some configurations that use these
ports as other devices.  This have been tested on several different
configurations to make sure that it is working for different combinations.

Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoisci: fix missed unlock in apc_agent_timeout()
Jeff Skirvin [Thu, 29 Sep 2011 01:35:32 +0000]
isci: fix missed unlock in apc_agent_timeout()

commit 983d3fdd332742167d0482c06fd29cf4b8a687c0 upstream.

Needed to jump to scic_lock unlock.

Also spotted by coccicheck.

Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoisci: fix support for large smp requests
Dan Williams [Thu, 29 Sep 2011 01:35:27 +0000]
isci: fix support for large smp requests

commit 54b5e3a4bfa3452bc10cd4da672099ccc46b8c09 upstream.

Kill the local smp response buffer.

Besides being unnecessary, it is too small (currently truncates
responses to 60 bytes).  The mid-layer will have already allocated a
sufficiently sized buffer, just kmap and copy into it directly.

Reported-by: Derick Marks <derick.w.marks@intel.com>
Tested-by: Derick Marks <derick.w.marks@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agolibsas: set sas_address and device type of rphy
Jack Wang [Fri, 23 Sep 2011 06:32:32 +0000]
libsas: set sas_address and device type of rphy

commit bb041a0e9c31229071b6e56e1d0d8374af0d2038 upstream.

Libsas forget to set the sas_address and device type of rphy lead to file
under /sys/class/sas_x show wrong value, fix that.

Signed-off-by: Jack Wang <jack_wang@usish.com>
Tested-by: Crystal Yu <crystal_yu@usish.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoipr: Always initiate hard reset in kdump kernel
Anton Blanchard [Mon, 1 Aug 2011 09:43:45 +0000]
ipr: Always initiate hard reset in kdump kernel

commit 5d7c20b7fa5c6ca19e871b4050e321c99d32bd43 upstream.

During kdump testing I noticed timeouts when initialising each IPR
adapter. While the driver has logic to detect an adapter in an
indeterminate state, it wasn't triggering and each adapter went
through a 5 minute timeout before finally going operational.

Some analysis showed the needs_hard_reset flag wasn't getting set.
We can check the reset_devices kernel parameter which is set by
kdump and force a full reset. This fixes the problem.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomegaraid_sas: Fix instance access in megasas_reset_timer
adam radford [Thu, 13 Oct 2011 23:01:12 +0000]
megaraid_sas: Fix instance access in megasas_reset_timer

commit f575c5d3ebdca3b0482847d8fcba971767754a9e upstream.

The following patch for megaraid_sas will fix a potential bad pointer access
in megasas_reset_timer(), when a MegaRAID 9265/9285 or 9360/9380 gets a
timeout.  megasas_build_io_fusion() sets SCp.ptr to be a struct
megasas_cmd_fusion *, but then megasas_reset_timer() was casting SCp.ptr to be
a struct megasas_cmd *, then trying to access cmd->instance, which is invalid.

Just loading instance from scmd->device->host->hostdata in
megasas_reset_timer() fixes the issue.

Signed-off-by: Adam Radford <aradford@gmail.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoPCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823
Josh Boyer [Wed, 5 Oct 2011 15:44:50 +0000]
PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823

commit 3e309cdf07c930f29a4e0f233e47d399bea34c68 upstream.

Commit 15bed0f2f added a quirk for the e823 Ricoh card reader to lower the
base frequency.  However, the quirk first checks to see if the proprietary
MMC controller is disabled, and returns if so.  On some devices, such as the
Lenovo X220, the MMC controller is already disabled by firmware it seems,
but the frequency change is still needed so sdhci-pci can talk to the cards.
Since the MMC controller is disabled, the frequency fixup was never being run
on these machines.

This moves the e823 check above the MMC controller check so that it always
gets run.

This fixes https://bugzilla.redhat.com/show_bug.cgi?id=722509

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agommc: core: ext_csd.raw_* used in comparison but never set
Andrei Warkentin [Sat, 24 Sep 2011 16:12:30 +0000]
mmc: core: ext_csd.raw_* used in comparison but never set

commit 5238acbe36dd5100fb6b035a995ae5fc89dd0708 upstream.

f39b2dd9d ("mmc: core: Bus width testing needs to handle suspend/resume")
added code to only compare read-only ext_csd fields in bus width testing
code, yet it's comparing some fields that are never set.

The affected fields are ext_csd.raw_erased_mem_count and
ext_csd.raw_partition_support.

Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com>
Acked-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agommc: core: Fix hangs related to insert/remove of cards
Ulf Hansson [Wed, 21 Sep 2011 18:08:13 +0000]
mmc: core: Fix hangs related to insert/remove of cards

commit 7f7e4129c23f0419257184dff6fec89d2d5a8964 upstream.

During a rescan operation mmc_attach(sd|mmc|sdio) functions are
called. The error handling in these function can trigger a detach
of the bus, which also meant a power off. This is not notified by
the rescan operation which then continues to the next attach function.

If a power off has been done, the framework must never send any
new commands to the host driver, without first doing a new power up.
This will most likely trigger any host driver to hang.

Moving power off out of detach and instead handle power off
separately when it is actually needed, solves the issue.

Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: Fix I2C mask definitions
Jean Delvare [Thu, 6 Oct 2011 16:16:24 +0000]
drm/radeon/kms: Fix I2C mask definitions

commit 286e0c94f9c3f292cb38a977fbbde3433347a868 upstream.

Commit 9b9fe724 accidentally used RADEON_GPIO_EN_* where
RADEON_GPIO_MASK_* was intended. This caused improper initialization
of I2C buses, mostly visible when setting i2c_algo_bit.bit_test=1.
Using the right constants fixes the problem.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: handle !force case in connector detect more gracefully
Alex Deucher [Fri, 7 Oct 2011 18:23:48 +0000]
drm/radeon/kms: handle !force case in connector detect more gracefully

commit d0d0a225e6ad43314c9aa7ea081f76adc5098ad4 upstream.

When force == false, we don't do load detection in the connector
detect functions.  Unforunately, we also return the previous
connector state so we never get disconnect events for DVI-I, DVI-A,
or VGA.  Save whether we detected the monitor via load detection
previously and use that to determine whether we return the previous
state or not.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41561

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: bail early in dvi_detect for digital only connectors
Alex Deucher [Fri, 7 Oct 2011 18:23:47 +0000]
drm/radeon/kms: bail early in dvi_detect for digital only connectors

commit 5f0a26128d66ef81613fe923d5c288942844ccdc upstream.

DVI-D and HDMI-A are digital only, so there's no need to
attempt analog load detect.  Also, skip bail before the
!force check, or we fail to get a disconnect events.
The next patches in the series attempt to fix disconnect
events for connectors with analog support (DVI-I, HDMI-B,
DVI-A).

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41561

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/i915: use correct SPD type value
Jesse Barnes [Thu, 22 Sep 2011 05:46:01 +0000]
drm/i915: use correct SPD type value

commit 260052100ef669b5374f72055379adc5da35034b upstream.

SPD frames are actually type 0x83, not just 0x3.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/i915/panel: Always record the backlight level again (but cleverly)
Takashi Iwai [Fri, 14 Oct 2011 09:45:40 +0000]
drm/i915/panel: Always record the backlight level again (but cleverly)

commit f52c619a590fa75276c07dfcaf380dee53e4ea4c upstream.

The commit 47356eb67285014527a5ab87543ba1fae3d1e10a introduced a
mechanism to record the backlight level only at disabling time, but it
also introduced a regression.  Since intel_lvds_enable() may be called
without disabling (e.g. intel_lvds_commit() calls it unconditionally),
the backlight gets back to the last recorded value.  For example, this
happens when you dim the backlight, close the lid and open the lid,
then the backlight suddenly goes to the brightest.

This patch fixes the bug by recording the backlight level always
when changed via intel_panel_set_backlight().  And,
intel_panel_{enable|disable}_backlight() call the internal function not
to update the recorded level wrongly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/i915: Wrap DP EDID fetch functions to enable eDP panel power
Keith Packard [Wed, 28 Sep 2011 23:38:44 +0000]
drm/i915: Wrap DP EDID fetch functions to enable eDP panel power

commit 8c241fef3e6f69f3f675678ae03599ece3f562e2 upstream.

Talking to the eDP DDC channel requires that the panel be powered
up. Wrap both the EDID and modes fetch code with calls to turn the vdd
power on and back off.

Signed-off-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxHCI: AMD isoc link TRB chain bit quirk
Andiry Xu [Fri, 23 Sep 2011 21:19:54 +0000]
xHCI: AMD isoc link TRB chain bit quirk

commit 7e393a834b41001174a8fb3ae3bc23a749467760 upstream.

Setting the chain (CH) bit in the link TRB of isochronous transfer rings
is required by AMD 0.96 xHCI host controller to successfully transverse
multi-TRB TD that span through different memory segments.

When a Missed Service Error event occurs, if the chain bit is not set in
the link TRB and the host skips TDs which just across a link TRB, the
host may falsely recognize the link TRB as a normal TRB. You can see
this may cause big trouble - the host does not jump to the right address
which is pointed by the link TRB, but continue fetching the memory which
is after the link TRB address, which may not even belong to the host,
and the result cannot be predicted.

This causes some big problems. Without the former patch I sent: "xHCI:
prevent infinite loop when processing MSE event", the system may hang.
With that patch applied, system does not hang, but the host still access
wrong memory address and isoc transfer will fail. With this patch,
isochronous transfer works as expected.

This patch should be applied to kernels as old as 2.6.36, which was when
the first isochronous support was added for the xHCI host controller.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxhci-mem.c: Check for ring->first_seg != NULL
Kautuk Consul [Mon, 19 Sep 2011 23:53:12 +0000]
xhci-mem.c: Check for ring->first_seg != NULL

commit 0e6c7f746ea99089fb3263709075c20485a479ae upstream.

There are 2 situations wherein the xhci_ring* might not get freed:
- When xhci_ring_alloc() -> xhci_segment_alloc() returns NULL and
  we goto the fail: label in xhci_ring_alloc. In this case, the ring
  will not get kfreed.
- When the num_segs argument to xhci_ring_alloc is passed as 0 and
  we try to free the rung after that.
  ( This doesn't really happen as of now in the code but we seem to
    be entertaining num_segs=0 in xhci_ring_alloc )

This should be backported to kernels as old as 2.6.31.

Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoEHCI: workaround for MosChip controller bug
Alan Stern [Wed, 12 Oct 2011 14:39:14 +0000]
EHCI: workaround for MosChip controller bug

commit 68aa95d5d4de31c9348c1628ffa85c805305ebc5 upstream.

This patch (as1489) works around a hardware bug in MosChip EHCI
controllers.  Evidently when one of these controllers increments the
frame-index register, it changes the three low-order bits (the
microframe counter) before changing the higher order bits (the frame
counter).  If the register is read at just the wrong time, the value
obtained is too low by 8.

When the appropriate quirk flag is set, we work around this problem by
reading the frame-index register a second time if the first value's
three low-order bits are all 0.  This gives the hardware a chance to
finish updating the register, yielding the correct value.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Jason N Pitt <jpitt@fhcrc.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: fix ehci alignment error
Harro Haan [Mon, 10 Oct 2011 12:38:27 +0000]
USB: fix ehci alignment error

commit 276532ba9666b36974cbe16f303fc8be99c9da17 upstream.

The Kirkwood gave an unaligned memory access error on
line 742 of drivers/usb/host/echi-hcd.c:
"ehci->last_periodic_enable = ktime_get_real();"

Signed-off-by: Harro Haan <hrhaan@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoEHCI : introduce a common ehci_setup
Matthieu CASTET [Sat, 2 Jul 2011 17:47:33 +0000]
EHCI : introduce a common ehci_setup

commit 2093c6b49c8f1dc581d8953aca71297d4cace55e upstream.

This allow to clean duplicated code in most of SOC driver.

Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoserial-core: power up uart port early before we do set_termios when resuming
Ning Jiang [Mon, 5 Sep 2011 08:28:18 +0000]
serial-core: power up uart port early before we do set_termios when resuming

commit 94abc56f4d90f289ea32a0a11d3577fcd8cb28fb upstream.

The following patch removed uart_change_pm() in uart_resume_port():

commit 5933a161abcb8d83a2c145177f48027c3c0a8995
Author: Yin Kangkai <kangkai.yin@linux.intel.com>
    serial-core: reset the console speed on resume

It will break the pxa serial driver when the system resumes from suspend mode
as it will try to set baud rate divider register in set_termios but with
clock off. The register value can not be set correctly on some platform if
the clock is disabled. The pxa driver will check the value and report the
following warning:

------------[ cut here ]------------
WARNING: at drivers/tty/serial/pxa.c:545 serial_pxa_set_termios+0x1dc/0x250()
Modules linked in:
[<c0281f30>] (unwind_backtrace+0x0/0xf0) from [<c029341c>] (warn_slowpath_common+0x4c/0x64)
[<c029341c>] (warn_slowpath_common+0x4c/0x64) from [<c029344c>] (warn_slowpath_null+0x18/0x1c)
[<c029344c>] (warn_slowpath_null+0x18/0x1c) from [<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250)
[<c044b1e4>] (serial_pxa_set_termios+0x1dc/0x250) from [<c044a840>] (uart_resume_port+0x128/0x2dc)
[<c044a840>] (uart_resume_port+0x128/0x2dc) from [<c044bbe0>] (serial_pxa_resume+0x18/0x24)
[<c044bbe0>] (serial_pxa_resume+0x18/0x24) from [<c0454d34>] (platform_pm_resume+0x40/0x4c)
[<c0454d34>] (platform_pm_resume+0x40/0x4c) from [<c0457ebc>] (pm_op+0x68/0xb4)
[<c0457ebc>] (pm_op+0x68/0xb4) from [<c0458368>] (device_resume+0xb0/0xec)
[<c0458368>] (device_resume+0xb0/0xec) from [<c04584c8>] (dpm_resume+0xe0/0x194)
[<c04584c8>] (dpm_resume+0xe0/0x194) from [<c0458588>] (dpm_resume_end+0xc/0x18)
[<c0458588>] (dpm_resume_end+0xc/0x18) from [<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac)
[<c02c518c>] (suspend_devices_and_enter+0x16c/0x1ac) from [<c02c5278>] (enter_state+0xac/0xdc)
[<c02c5278>] (enter_state+0xac/0xdc) from [<c02c48ec>] (state_store+0xa0/0xbc)
[<c02c48ec>] (state_store+0xa0/0xbc) from [<c0408f7c>] (kobj_attr_store+0x18/0x1c)
[<c0408f7c>] (kobj_attr_store+0x18/0x1c) from [<c034a6a4>] (sysfs_write_file+0x108/0x140)
[<c034a6a4>] (sysfs_write_file+0x108/0x140) from [<c02fb798>] (vfs_write+0xac/0x134)
[<c02fb798>] (vfs_write+0xac/0x134) from [<c02fb8cc>] (sys_write+0x3c/0x68)
[<c02fb8cc>] (sys_write+0x3c/0x68) from [<c027c700>] (ret_fast_syscall+0x0/0x2c)
---[ end trace 88289eceb4675b04 ]---

This patch fix the problem by adding the power on opertion back for uart
console when console_suspend_enabled is true.

Signed-off-by: Ning Jiang <ning.jiang@marvell.com>
Tested-by: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoserial: pxa: work around for errata #20
Marcus Folkesson [Tue, 30 Aug 2011 11:53:10 +0000]
serial: pxa: work around for errata #20

commit e44aabd649c80e8be16ede3ed3cbff6fb2561ca9 upstream.

Errata E20: UART: Character Timeout interrupt remains set under certain
software conditions.

Implication: The software servicing the UART can be trapped in an infinite loop.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: qcserial: add device ID for "HP un2430 Mobile Broadband Module"
Rigbert Hamisch [Tue, 27 Sep 2011 08:46:43 +0000]
USB: qcserial: add device ID for "HP un2430 Mobile Broadband Module"

commit 1bfac90d1b8e63a4d44158c3445d8fda3fb6d5eb upstream.

add device ID for "HP un2430 Mobile Broadband Module"

Signed-off-by: Rigbert Hamisch <rigbert@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: qcserial: Add support for Sierra Wireless MC8355/Gobi 3000
Richard Hartmann [Tue, 20 Sep 2011 18:50:51 +0000]
USB: qcserial: Add support for Sierra Wireless MC8355/Gobi 3000

commit 68c79e5756903229fa96826a2493c2265a3b395f upstream.

Simple patch to make qcserial recognize the USB id of the Sierra
Wireless MC8355 which is based on the Gobi 3000 chip.

Both UMTS and GPS work fine.

Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: hv: fix a kernel warning in netvsc_linkstatus_callback()
Haiyang Zhang [Thu, 1 Sep 2011 19:19:42 +0000]
staging: hv: fix a kernel warning in netvsc_linkstatus_callback()

commit c4b6a2eaf1c14810a4803d658f68614365978738 upstream.

netif_notify_peers() caused a kernel warning in netvsc_linkstatus_callback(),
because netvsc_linkstatus_callback() is within IRQ context. So we move
the first call to netif_notify_peers() into queued work as well, but with
zero delay.

In addition to "staging-next", this should also be back-ported to stable
kernels 2.6.32 and later.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoStaging: hv: Add support for >2 TB LUN in storage driver.
Mike Sterling [Tue, 6 Sep 2011 23:10:55 +0000]
Staging: hv: Add support for >2 TB LUN in storage driver.

commit cf55f4a8b6243b42fb91c56d1421db0d36d60f96 upstream.

If a LUN larger than 2 TB is attached to a Linux VM on Hyper-V, we currently
report a maximum size of 2 TB. This patch resolves the issue in hv_storvsc.
Thanks to Robert Scheck <robert.scheck@etes.de> for reporting the issue.

Reported-by: Robert Scheck <robert.scheck@etes.de>
Signed-off-by: Mike Sterling <mike.sterling@microsoft.com>
Signed-off-by: K.Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: quatech_usb2: Potential lost wakeup scenario in TIOCMIWAIT
Kautuk Consul [Wed, 14 Sep 2011 03:26:21 +0000]
staging: quatech_usb2: Potential lost wakeup scenario in TIOCMIWAIT

commit e8df1674d383d2ecc6efa8d7dba74c03aafdfdd7 upstream.

If the usermode app does an ioctl over this serial device  by
using TIOCMIWAIT, then the code will wait by setting the current
task state to TASK_INTERRUPTIBLE and then calling schedule().
This will be woken up by the qt2_process_modem_status on URB
completion when the port_extra->shadowMSR is set to the new
modem status.

However, this could result in a lost wakeup scenario due to a race
in the logic in the qt2_ioctl(TIOCMIWAIT) loop and the URB completion
for new modem status in qt2_process_modem_status.
Due to this, the usermode app's task will continue to sleep despite a
change in the modem status.

Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: serqt_usb2: remove ssu100 from supported devices
Bill Pemberton [Mon, 29 Aug 2011 17:48:54 +0000]
staging: serqt_usb2: remove ssu100 from supported devices

commit 7cbf3c7cd59288fb5e9f31815c74773549668d43 upstream.

The serqt_usb2 driver will not work properly with the ssu100 device
even though it claims to support it.  The ssu100 is supported by the
ssu100 driver in mainline so there is no need to have it claimed by
serqt_usb2.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: usbip: fix up api changes that broke windows clients
Alexander Thomas [Mon, 19 Sep 2011 14:56:51 +0000]
staging: usbip: fix up api changes that broke windows clients

commit 7518b9b8fc72a6c0ba67f33bdd4689c7dd28686a upstream.

Revert changes in definitions that were submitted on May 11 2011 and
committed on June 7 2011. No reason for the change in these values was
given in the patch comment, it broke compatibility with older
versions, and was difficult to detect by the simultaneous move of the
lines of code.

Signed-off-by: Alexander Thomas <alexander.thomas@esaturnus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: for usb_autopm_get_interface_async -EINPROGRESS is not an error
Jim Wylder [Wed, 7 Sep 2011 02:07:20 +0000]
USB: for usb_autopm_get_interface_async -EINPROGRESS is not an error

commit c5a48592d874ddef8c7880311581eccf0eb30c3b upstream.

A return value of -EINPROGRESS from pm_runtime_get indicates that
the device is already resuming due to a previous call.  Internally,
usb_autopm_get_interface_async doesn't treat this as an error and
increments the usage count, but passes the error status along
to the caller.  The logical assumption of the caller is that
any negative return value reflects the device not resuming
and the pm_usage_cnt not being incremented.  Since the usage count
is being incremented and the device is resuming, return success (0)
instead.

Signed-off-by: James Wylder <james.wylder@motorola.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoTTY: pty, release tty in all ptmx_open fail paths
Jiri Slaby [Wed, 12 Oct 2011 09:32:44 +0000]
TTY: pty, release tty in all ptmx_open fail paths

commit 1177c0efc04d032644895b8d757f55b433912596 upstream.

Mistakenly, commit 64ba3dc3143d (tty: never hold BTM while getting
tty_mutex) switched one fail path in ptmx_open to not free the newly
allocated tty.

Fix that by jumping to the appropriate place. And rename the labels so
that it's clear what is going on there.

Introduced-in: v2.6.36-rc2
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoTTY: make tty_add_file non-failing
Jiri Slaby [Wed, 12 Oct 2011 09:32:43 +0000]
TTY: make tty_add_file non-failing

commit fa90e1c935472281de314e6d7c9a37db9cbc2e4e upstream.

If tty_add_file fails at the point it is now, we have to revert all
the changes we did to the tty. It means either decrease all refcounts
if this was a tty reopen or delete the tty if it was newly allocated.

There was a try to fix this in v3.0-rc2 using tty_release in 0259894c7
(TTY: fix fail path in tty_open). But instead it introduced a NULL
dereference. It's because tty_release dereferences
filp->private_data, but that one is set even in our tty_add_file. And
when tty_add_file fails, it's still NULL/garbage. Hence tty_release
cannot be called there.

To circumvent the original leak (and the current NULL deref) we split
tty_add_file into two functions, making the latter non-failing. In
that case we may do the former early in open, where handling failures
is easy. The latter stays as it is now. So there is no change in
functionality.

The original bug (leak) was introduced by f573bd176 (tty: Remove
__GFP_NOFAIL from tty_add_file()). Thanks Dan for reporting this.

Later, we may split tty_release into more functions and call only some
of them in this fail path instead. (If at all possible.)

Introduced-in: v2.6.37-rc2
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoTTY: drop driver reference in tty_open fail path
Jiri Slaby [Wed, 12 Oct 2011 09:32:42 +0000]
TTY: drop driver reference in tty_open fail path

commit c290f8358acaeffd8e0c551ddcc24d1206143376 upstream.

When tty_driver_lookup_tty fails in tty_open, we forget to drop a
reference to the tty driver. This was added by commit 4a2b5fddd5 (Move
tty lookup/reopen to caller).

Fix that by adding tty_driver_kref_put to the fail path.

I will refactor the code later. This is for the ease of backporting to
stable.

Introduced-in: v2.6.28-rc2
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoCIFS: Fix DFS handling in cifs_get_file_info
Pavel Shilovsky [Sat, 22 Oct 2011 10:37:50 +0000]
CIFS: Fix DFS handling in cifs_get_file_info

commit 42274bb22afc3e877ae5abed787b0b09d7dede52 upstream.

We should call cifs_all_info_to_fattr in rc == 0 case only.

Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoCIFS: Fix incorrect max RFC1002 write size value
Pavel Shilovsky [Fri, 7 Oct 2011 14:57:45 +0000]
CIFS: Fix incorrect max RFC1002 write size value

commit 94443f43404239c2a6dc4252a7cb9e77f5b1eb6e upstream.

..the length field has only 17 bits.

Acked-by: Jeff Layton <jlayton@samba.org>
Signed-off-by: Pavel Shilovsky <piastry@etersoft.ru>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoLinux 3.1
Linus Torvalds [Mon, 24 Oct 2011 07:10:05 +0000]
Linux 3.1

7 years agoMerge git://git.infradead.org/iommu-2.6
Linus Torvalds [Mon, 24 Oct 2011 05:08:24 +0000]
Merge git://git.infradead.org/iommu-2.6

* git://git.infradead.org/iommu-2.6:
  intel-iommu: fix superpage support in pfn_to_dma_pte()
  intel-iommu: set iommu_superpage on VM domains to lowest common denominator
  intel-iommu: fix return value of iommu_unmap() API
  MAINTAINERS: Update VT-d entry for drivers/pci -> drivers/iommu move
  intel-iommu: Export a flag indicating that the IOMMU is used for iGFX.
  intel-iommu: Workaround IOTLB hang on Ironlake GPU
  intel-iommu: Fix AB-BA lockdep report

7 years agoMerge branch 'for-linus' of http://people.redhat.com/agk/git/linux-dm
Linus Torvalds [Mon, 24 Oct 2011 05:05:38 +0000]
Merge branch 'for-linus' of people.redhat.com/agk/git/linux-dm

* 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
  dm kcopyd: fix job_pool leak

7 years agox86: Fix S4 regression
Takashi Iwai [Sun, 23 Oct 2011 21:19:12 +0000]
x86: Fix S4 regression

Commit 4b239f458 ("x86-64, mm: Put early page table high") causes a S4
regression since 2.6.39, namely the machine reboots occasionally at S4
resume.  It doesn't happen always, overall rate is about 1/20.  But,
like other bugs, once when this happens, it continues to happen.

This patch fixes the problem by essentially reverting the memory
assignment in the older way.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@kernel.org>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Yinghai Lu <yinghai.lu@oracle.com>
[ We'll hopefully find the real fix, but that's too late for 3.1 now ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodm kcopyd: fix job_pool leak
Alasdair G Kergon [Sun, 23 Oct 2011 19:55:17 +0000]
dm kcopyd: fix job_pool leak

Fix memory leak introduced by commit a6e50b409d3f9e0833e69c3c9cca822e8fa4adbb
(dm snapshot: skip reading origin when overwriting complete chunk).

When allocating a set of jobs from kc->job_pool, job->master_job must be
set (to point to itself) so that the mempool item gets freed when the
master_job completes.

master_job was introduced by commit c6ea41fbbe08f270a8edef99dc369faf809d1bd6
(dm kcopyd: preallocate sub jobs to avoid deadlock)

Reported-by: Michael Leun <ml@newton.leun.net>
Cc: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>