6 years agoUSB: Blacklisted Cinterion's PLxx WWAN Interface
Schemmel Hans-Christoph [Mon, 6 May 2013 09:05:12 +0000]
USB: Blacklisted Cinterion's PLxx WWAN Interface

commit 8ff10bdb14a52e3f25d4ce09e0582a8684c1a6db upstream.

/drivers/usb/serial/option.c: Blacklisted Cinterion's PLxx WWAN
Interface (USB Interface 4), because it will be handled by QMI WWAN
driver. Product IDs renamed.

Signed-off-by: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoTTY: Fix tty miss restart after we turn off flow-control
Wang YanQing [Thu, 9 May 2013 06:16:47 +0000]
TTY: Fix tty miss restart after we turn off flow-control

commit dab73b4eb9ef924a2b90dab84e539076d82b256f upstream.

I meet emacs hang in start if I do the operation below:
  1: echo 3 > /proc/sys/vm/drop_caches
  2: emacs BigFile
  3: Press CTRL-S follow 2 immediately

Then emacs hang on, CTRL-Q can't resume, the terminal
hang on, you can do nothing with this terminal except
close it.

The reason is before emacs takeover control the tty,
we use CTRL-S to XOFF it. Then when emacs takeover the
control, it may don't use the flow-control, so emacs hang.
This patch fix it.

This patch will fix a kind of strange tty relation hang problem,
I believe I meet it with vim in ssh, and also see below bug report:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=465823

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: cxacru: potential underflow in cxacru_cm_get_array()
Dan Carpenter [Sun, 19 May 2013 18:52:20 +0000]
USB: cxacru: potential underflow in cxacru_cm_get_array()

commit 2a0ebf80aa95cc758d4725f74a7016e992606a39 upstream.

The value of "offd" comes off the instance->rcv_buf[] and we used it as
the offset into an array.  The problem is that we check the upper bound
but not for negative values.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: ftdi_sio: Add support for Newport CONEX motor drivers
Gomella, Andrew (NIH/NHLBI) [F] [Fri, 17 May 2013 17:39:46 +0000]
USB: ftdi_sio: Add support for Newport CONEX motor drivers

commit 7138143972b7c293267c783fc99a194f0ceff7f2 upstream.

Here are two more devices that use FTDI USB-to-serial chips with new product ID's.

The devices are the Newport Conex-AGP and Conex-CC motor controllers.
(http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx)
(http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx)

usb-devices command yields:

P:  Vendor=104d ProdID=3002 Rev=06.00
S:  Manufacturer=Newport
S:  Product=CONEX-CC

as well as

P:  Vendor=104d ProdID=3006 Rev=06.00
S:  Manufacturer=Newport
S:  Product=CONEX-AGP

Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoUSB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card
Dan Williams [Mon, 6 May 2013 21:16:44 +0000]
USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card

commit 49c6e370dd6400b84897c4100095089b5c13a061 upstream.

A rebranded Novatel E371 for AT&T's LTE bands.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agousb: option: Add Telewell TW-LTE 4G
Teppo Kotilainen [Fri, 3 May 2013 07:28:12 +0000]
usb: option: Add Telewell TW-LTE 4G

commit 73c042df6e1bc50544842a04b777b36bbe3630e6 upstream.

Information from driver description files:

  diag:  VID_19D2&PID_0412&MI_00
  nmea:  VID_19D2&PID_0412&MI_01
  at:    VID_19D2&PID_0412&MI_02
  modem: VID_19D2&PID_0412&MI_03
  net:   VID_19D2&PID_0412&MI_04

Signed-off-by: Teppo Kotilainen <qubit303@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agostaging: vt6656: use free_netdev instead of kfree
Hema Prathaban [Sat, 11 May 2013 17:09:47 +0000]
staging: vt6656: use free_netdev instead of kfree

commit 0a438d5b381e2bdfd5e02d653bf46fcc878356e3 upstream.

use free_netdev() instead of kfree(pDevice->apdev)

Signed-off-by: Hema Prathaban <hemaklnce@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: plat-orion: Fix num_resources and id for ge10 and ge11
Gregory CLEMENT [Sun, 19 May 2013 20:12:43 +0000]
ARM: plat-orion: Fix num_resources and id for ge10 and ge11

commit 2b8b2797142c7951e635c6eec5d1705ee9bc45c5 upstream.

When platform data were moved from arch/arm/mach-mv78xx0/common.c to
arch/arm/plat-orion/common.c with the commit "7e3819d ARM: orion:
Consolidate ethernet platform data", there were few typo made on
gigabit Ethernet interface ge10 and ge11. This commit writes back
their initial value, which allows to use this interfaces again.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoavr32: fix relocation check for signed 18-bit offset
Hans-Christian Egtvedt [Mon, 13 May 2013 20:22:10 +0000]
avr32: fix relocation check for signed 18-bit offset

commit e68c636d88db3fda74e664ecb1a213ae0d50a7d8 upstream.

Caught by static code analysis by David.

Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.47
Greg Kroah-Hartman [Fri, 24 May 2013 18:14:41 +0000]
Linux 3.4.47

6 years agomedia: mantis: fix silly crash case
Alan Cox [Thu, 9 Aug 2012 15:33:52 +0000]
media: mantis: fix silly crash case

commit e1d45ae10aea8e8a403e5d96bf5902ee670007ff upstream.

If we set mantis->fe to NULL on an error its not a good idea to then try
passing NULL to the unregister paths and oopsing really.

Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=16473

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: Fix VRAM size calculation for VRAM >= 4GB
Niels Ole Salscheider [Sat, 18 May 2013 19:19:23 +0000]
drm/radeon: Fix VRAM size calculation for VRAM >= 4GB

commit fc986034540102cd090237bf3f70262e1ae80d9c upstream.

Add ULL prefix to avoid overflow.

Signed-off-by: Niels Ole Salscheider <niels_ole@salscheider-online.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoi2c: designware: always clear interrupts before enabling them
Mika Westerberg [Mon, 13 May 2013 00:54:30 +0000]
i2c: designware: always clear interrupts before enabling them

commit 2a2d95e9d6d29e726cc294b65391917ed2e32bf4 upstream.

If the I2C bus is put to a low power state by an ACPI method it might pull
the SDA line low (as its power is removed). Once the bus is put to full
power state again, the SDA line is pulled back to high. This transition
looks like a STOP condition from the controller point-of-view which sets
STOP detected bit in its status register causing the driver to fail
subsequent transfers.

Fix this by always clearing all interrupts before we start a transfer.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohwmon: fix error return code in abituguru_probe()
Wei Yongjun [Mon, 13 May 2013 06:01:43 +0000]
hwmon: fix error return code in abituguru_probe()

commit ecacb0b17c08fae89f65468727f0e4b8e91da4e1 upstream.

Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agobtrfs: don't stop searching after encountering the wrong item
Gabriel de Perthuis [Mon, 6 May 2013 17:40:18 +0000]
btrfs: don't stop searching after encountering the wrong item

commit 03b71c6ca6286625d8f1ed44aabab9b5bf5dac10 upstream.

The search ioctl skips items that are too large for a result buffer, but
inline items of a certain size occuring before any search result is
found would trigger an overflow and stop the search entirely.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=57641

Signed-off-by: Gabriel de Perthuis <g2p.code+btrfs@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.46
Greg Kroah-Hartman [Sun, 19 May 2013 17:58:34 +0000]
Linux 3.4.46

6 years agousermodehelper: check subprocess_info->path != NULL
Oleg Nesterov [Thu, 16 May 2013 15:43:55 +0000]
usermodehelper: check subprocess_info->path != NULL

commit 264b83c07a84223f0efd0d1db9ccc66d6f88288f upstream.

argv_split(empty_or_all_spaces) happily succeeds, it simply returns
argc == 0 and argv[0] == NULL. Change call_usermodehelper_exec() to
check sub_info->path != NULL to avoid the crash.

This is the minimal fix, todo:

 - perhaps we should change argv_split() to return NULL or change the
   callers.

 - kill or justify ->path[0] check

 - narrow the scope of helper_lock()

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-By: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: check incoming cliprects pointer
Kees Cook [Mon, 13 May 2013 05:00:51 +0000]
drm/radeon: check incoming cliprects pointer

commit fefaedcfb82d2e57c2320acf60604ab03b750cc0 upstream.

The "boxes" parameter points into userspace memory. It should be verified
like any other operation against user memory.

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex
Benjamin LaHaise [Thu, 16 May 2013 19:04:27 +0000]
ipmi: ipmi_devintf: compat_ioctl method fails to take ipmi_mutex

commit 6368087e851e697679af059b4247aca33a69cef3 upstream.

When a 32 bit version of ipmitool is used on a 64 bit kernel, the
ipmi_devintf code fails to correctly acquire ipmi_mutex.  This results in
incomplete data being retrieved in some cases, or other possible failures.
Add a wrapper around compat_ipmi_ioctl() to take ipmi_mutex to fix this.

Signed-off-by: Benjamin LaHaise <bcrl@kvack.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow
Chen Gang [Thu, 16 May 2013 19:04:25 +0000]
drivers/char/ipmi: memcpy, need additional 2 bytes to avoid memory overflow

commit a5f2b3d6a738e7d4180012fe7b541172f8c8dcea upstream.

When calling memcpy, read_data and write_data need additional 2 bytes.

  write_data:
    for checking:  "if (size > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(bt->write_data + 3, data + 1, size - 1)"

  read_data:
    for checking:  "if (msg_len < 3 || msg_len > IPMI_MAX_MSG_LENGTH)"
    for operating: "memcpy(data + 2, bt->read_data + 4, msg_len - 2)"

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoACPI / EC: Restart transaction even when the IBF flag set
Lan Tianyu [Mon, 6 May 2013 03:23:40 +0000]
ACPI / EC: Restart transaction even when the IBF flag set

commit 28fe5c825f8e15744d04c7c1b8df197950923ecd upstream.

The EC driver works abnormally with IBF flag always set.
IBF means "The host has written a byte of data to the command
or data port, but the embedded controller has not yet read it".
If IBF is set in the EC status and not cleared, this will cause
all subsequent EC requests to fail with a timeout error.

Change the EC driver so that it doesn't refuse to restart a
transaction if IBF is set in the status.  Also increase the
number of transaction restarts to 5, as it turns out that 2
is not sufficient in some cases.

This bug happens on several different machines (Asus V1S,
Dell Latitude E6530, Samsung R719, Acer Aspire 5930G,
Sony Vaio SR19VN and others).

[rjw: Changelog]
References: https://bugzilla.kernel.org/show_bug.cgi?id=14733
References: https://bugzilla.kernel.org/show_bug.cgi?id=15560
References: https://bugzilla.kernel.org/show_bug.cgi?id=15946
References: https://bugzilla.kernel.org/show_bug.cgi?id=42945
References: https://bugzilla.kernel.org/show_bug.cgi?id=48221
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoiscsi-target: Fix processing of OOO commands
Shlomo Pongratz [Sun, 5 May 2013 14:36:26 +0000]
iscsi-target: Fix processing of OOO commands

commit 3eccfdb01da58fbd0f789ae6ca61cee3769e26de upstream.

Fix two issues in OOO commands processing done at iscsit_attach_ooo_cmdsn.

Handle command serial numbers wrap around by using iscsi_sna_lt and not regular comparisson.

The routine iterates until it finds an entry whose serial number is greater than the serial number of
the new one, thus the new entry should be inserted before that entry and not after.

Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrivers/rtc/rtc-pcf2123.c: fix error return code in pcf2123_probe()
Wei Yongjun [Mon, 29 Apr 2013 23:21:07 +0000]
drivers/rtc/rtc-pcf2123.c: fix error return code in pcf2123_probe()

commit 35623715818dfa720cccf99cd280dcbb4b78da23 upstream.

Fix to return -ENODEV in the chip not found error handling
case instead of 0, as done elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrbd: fix for deadlock when using automatic split-brain-recovery
Philipp Reisner [Wed, 27 Mar 2013 13:08:47 +0000]
drbd: fix for deadlock when using automatic split-brain-recovery

commit 7c689e63a847316c1b2500f86891b0a574ce7e69 upstream.

With an automatic after split-brain recovery policy of
"after-sb-1pri call-pri-lost-after-sb",
when trying to drbd_set_role() to R_SECONDARY,
we run into a deadlock.

This was first recognized and supposedly fixed by
2009-06-10 "Fixed a deadlock when using automatic split brain recovery when both nodes are"
replacing drbd_set_role() with drbd_change_state() in that code-path,
but the first hunk of that patch forgets to remove the drbd_set_role().

We apparently only ever tested the "two primaries" case.

Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agor8169: fix vlan tag read ordering.
Francois Romieu [Thu, 9 May 2013 22:53:11 +0000]
r8169: fix vlan tag read ordering.

commit ce11ff5e5963e441feb591e76278528f876c332d upstream.

Control of receive descriptor must not be returned to ethernet chipset
before vlan tag processing is done.

VLAN tag receive word is now reset both in normal and error path.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Spotted-by: Timo Teras <timo.teras@iki.fi>
Cc: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohugetlbfs: fix mmap failure in unaligned size request
Naoya Horiguchi [Tue, 7 May 2013 23:18:13 +0000]
hugetlbfs: fix mmap failure in unaligned size request

commit af73e4d9506d3b797509f3c030e7dcd554f7d9c4 upstream.

The current kernel returns -EINVAL unless a given mmap length is
"almost" hugepage aligned.  This is because in sys_mmap_pgoff() the
given length is passed to vm_mmap_pgoff() as it is without being aligned
with hugepage boundary.

This is a regression introduced in commit 40716e29243d ("hugetlbfs: fix
alignment of huge page requests"), where alignment code is pushed into
hugetlb_file_setup() and the variable len in caller side is not changed.

To fix this, this patch partially reverts that commit, and adds
alignment code in caller side.  And it also introduces hstate_sizelog()
in order to get proper hstate to specified hugepage size.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=56881

[akpm@linux-foundation.org: fix warning when CONFIG_HUGETLB_PAGE=n]
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: <iceman_dvd@yahoo.com>
Cc: Steven Truelove <steven.truelove@utoronto.ca>
Cc: Jianguo Wu <wujianguo@huawei.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopch_dma: Use GFP_ATOMIC because called from interrupt context
Tomoya MORINAGA [Tue, 12 Feb 2013 02:25:33 +0000]
pch_dma: Use GFP_ATOMIC because called from interrupt context

commit 5c1ef59168c485318e40ba485c1eba57d81d0faa upstream.

pdc_desc_get() is called from pd_prep_slave_sg, and the function is
called from interrupt context(e.g. Uart driver "pch_uart.c").
In fact, I saw kernel error message.
So, GFP_ATOMIC must be used not GFP_NOIO.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodm thin: do not set discard_zeroes_data
Mike Snitzer [Wed, 26 Sep 2012 22:45:39 +0000]
dm thin: do not set discard_zeroes_data

commit 307615a26e95406c42c95916a66ba50434567e0f upstream.

The dm thin pool target claims to support the zeroing of discarded
data areas.  This turns out to be incorrect when processing discards
that do not exactly cover a complete number of blocks, so the target
must always set discard_zeroes_data_unsupported.

The thin pool target will zero blocks when they are allocated if the
skip_block_zeroing feature is not specified.  The block layer
may send a discard that only partly covers a block.  If a thin pool
block is partially discarded then there is no guarantee that the
discarded data will get zeroed before it is accessed again.
Due to this, thin devices cannot claim discards will always zero data.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Cc: Libo Chen <libo.chen@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxfrm6: release dev before returning error
Cong Wang [Thu, 9 May 2013 22:40:00 +0000]
xfrm6: release dev before returning error

[ Upstream commit 84c4a9dfbf430861e7588d95ae3ff61535dca351 ]

We forget to call dev_put() on error path in xfrm6_fill_dst(),
its caller doesn't handle this.

Signed-off-by: Cong Wang <amwang@redhat.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipv6: do not clear pinet6 field
Eric Dumazet [Thu, 9 May 2013 10:28:16 +0000]
ipv6: do not clear pinet6 field

[ Upstream commit f77d602124d865c38705df7fa25c03de9c284ad2 ]

We have seen multiple NULL dereferences in __inet6_lookup_established()

After analysis, I found that inet6_sk() could be NULL while the
check for sk_family == AF_INET6 was true.

Bug was added in linux-2.6.29 when RCU lookups were introduced in UDP
and TCP stacks.

Once an IPv6 socket, using SLAB_DESTROY_BY_RCU is inserted in a hash
table, we no longer can clear pinet6 field.

This patch extends logic used in commit fcbdf09d9652c891
("net: fix nulls list corruptions in sk_prot_alloc")

TCP/UDP/UDPLite IPv6 protocols provide their own .clear_sk() method
to make sure we do not clear pinet6 field.

At socket clone phase, we do not really care, as cloning the parent (non
NULL) pinet6 is not adding a fatal race.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomacvlan: fix passthru mode race between dev removal and rx path
Jiri Pirko [Thu, 9 May 2013 04:23:40 +0000]
macvlan: fix passthru mode race between dev removal and rx path

[ Upstream commit 233c7df0821c4190e2d3f4be0f2ca0ab40a5ed8c, note
  that I had to add list_first_or_null_rcu to rculist.h in order
  to accomodate this fix. ]

Currently, if macvlan in passthru mode is created and data are rxed and
you remove this device, following panic happens:

NULL pointer dereference at 0000000000000198
IP: [<ffffffffa0196058>] macvlan_handle_frame+0x153/0x1f7 [macvlan]

I'm using following script to trigger this:
<script>
while [ 1 ]
do
ip link add link e1 name macvtap0 type macvtap mode passthru
ip link set e1 up
ip link set macvtap0 up
IFINDEX=`ip link |grep macvtap0 | cut -f 1 -d ':'`
cat /dev/tap$IFINDEX  >/dev/null &
ip link del dev macvtap0
done
</script>

I run this script while "ping -f" is running on another machine to send
packets to e1 rx.

Reason of the panic is that list_first_entry() is blindly called in
macvlan_handle_frame() even if the list was empty. vlan is set to
incorrect pointer which leads to the crash.

I'm fixing this by protecting port->vlans list by rcu and by preventing
from getting incorrect pointer in case the list is empty.

Introduced by: commit eb06acdc85585f2 "macvlan: Introduce 'passthru' mode to takeover the underlying device"

Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoif_cablemodem.h: Add parenthesis around ioctl macros
Josh Boyer [Wed, 8 May 2013 09:45:47 +0000]
if_cablemodem.h: Add parenthesis around ioctl macros

[ Upstream commit 4f924b2aa4d3cb30f07e57d6b608838edcbc0d88 ]

Protect the SIOCGCM* ioctl macros with parenthesis.

Reported-by: Paul Wouters <pwouters@redhat.com>
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years ago3c59x: fix PCI resource management
Sergei Shtylyov [Thu, 9 May 2013 11:14:07 +0000]
3c59x: fix PCI resource management

[ Upstream commit 4b264a1676e70dc656ba53a8cac690f2d4b65f4e ]

The driver wrongly claimed I/O ports at an address returned by pci_iomap() --
even if it was passed an MMIO address.  Fix this by claiming/releasing all PCI
resources in the PCI driver's probe()/remove() methods instead and get rid of
'must_free_region' flag weirdness (why would Cardbus claim anything for us?).

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years ago3c59x: fix freeing nonexistent resource on driver unload
Sergei Shtylyov [Thu, 2 May 2013 11:10:22 +0000]
3c59x: fix freeing nonexistent resource on driver unload

[ Upstream commit c81400be716aa4c76f6ebf339ba94358dbbf6da6 ]

When unloading the driver that drives an EISA board, a message similar to the
following one is displayed:

Trying to free nonexistent resource <0000000000013000-000000000001301f>

Then an user is unable to reload the driver because the resource it requested in
the previous load hasn't been freed. This happens most probably due to a typo in
vortex_eisa_remove() which calls release_region() with 'dev->base_addr'  instead
of 'edev->base_addr'...

Reported-by: Matthew Whitehead <tedheadster@gmail.com>
Tested-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopacket: tpacket_v3: do not trigger bug() on wrong header status
Daniel Borkmann [Fri, 3 May 2013 02:57:00 +0000]
packet: tpacket_v3: do not trigger bug() on wrong header status

[ Upstream commit 8da3056c04bfc5f69f840ab038a38389e2de8189 ]

Jakub reported that it is fairly easy to trigger the BUG() macro
from user space with TPACKET_V3's RX_RING by just giving a wrong
header status flag. We already had a similar situation in commit
7f5c3e3a80e6654 (``af_packet: remove BUG statement in
tpacket_destruct_skb'') where this was the case in the TX_RING
side that could be triggered from user space. So really, don't use
BUG() or BUG_ON() unless there's really no way out, and i.e.
don't use it for consistency checking when there's user space
involved, no excuses, especially not if you're slapping the user
with WARN + dump_stack + BUG all at once. The two functions are
of concern:

  prb_retire_current_block() [when block status != TP_STATUS_KERNEL]
  prb_open_block() [when block_status != TP_STATUS_KERNEL]

Calls to prb_open_block() are guarded by ealier checks if block_status
is really TP_STATUS_KERNEL (racy!), but the first one BUG() is easily
triggable from user space. System behaves still stable after they are
removed. Also remove that yoda condition entirely, since it's already
guarded.

Reported-by: Jakub Zawadzki <darkjames-ws@darkjames.pl>
Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agobridge: fix race with topology change timer
stephen hemminger [Thu, 2 May 2013 14:23:28 +0000]
bridge: fix race with topology change timer

[ Upstream commit 83401eb4990ff6af55aeed8f49681558544192e6 ]

A bridge should only send topology change notice if it is not
the root bridge. It is possible for message age timer to elect itself
as a new root bridge, and still have a topology change timer running
but waiting for bridge lock on other CPU.

Solve the race by checking if we are root bridge before continuing.
This was the root cause of the cases where br_send_tcn_bpdu would OOPS.

Reported-by: JerryKang <jerry.kang@samsung.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: vlan,ethtool: netdev_features_t is more than 32 bit
Bjørn Mork [Wed, 1 May 2013 23:06:42 +0000]
net: vlan,ethtool: netdev_features_t is more than 32 bit

[ Upstream commit b29d3145183da4e07d4b570fa8acdd3ac4a5c572 ]

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: use netdev_features_t in skb_needs_linearize()
Patrick McHardy [Wed, 1 May 2013 22:36:49 +0000]
net: use netdev_features_t in skb_needs_linearize()

[ Upstream commit 6708c9e5cc9bfc7c9a00ce9c0fdd0b1d4952b3d1 ]

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet_sched: act_ipt forward compat with xtables
Jamal Hadi Salim [Sun, 28 Apr 2013 05:06:38 +0000]
net_sched: act_ipt forward compat with xtables

[ Upstream commit 0dcffd09641f3abb21ac5cabc61542ab289d1a3c ]

Deal with changes in newer xtables while maintaining backward
compatibility. Thanks to Jan Engelhardt for suggestions.

Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years ago3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)
Matthew Whitehead [Mon, 29 Apr 2013 21:46:53 +0000]
3c509.c: call SET_NETDEV_DEV for all device types (ISA/ISAPnP/EISA)

[ Upstream commit 3b54912f9cd167641b91d4a697bd742f70e534fe ]

The venerable 3c509 driver only sets its device parent in one case, the ISAPnP one.
It does this with the SET_NETDEV_DEV function. It should register with the device
hierarchy in two additional cases: standard (non-PnP) ISA and EISA.

- Currently they appear here:
/sys/devices/virtual/net/eth0 (standard ISA)
/sys/devices/virtual/net/eth1 (EISA)

- Rather, they should instead be here:
/sys/devices/isa/3c509.0/net/eth0 (standard ISA)
/sys/devices/pci0000:00/0000:00:07.0/00:04/net/eth1 (EISA)

Tested on ISA and EISA boards.

Signed-off-by: Matthew Whitehead <tedheadster@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agosfc: Fix naming of MTD partitions for FPGA bitfiles
Ben Hutchings [Mon, 22 Apr 2013 21:40:07 +0000]
sfc: Fix naming of MTD partitions for FPGA bitfiles

[ Upstream commit 89cc80a44b7c320e08599cb86f6aef0ead8986a1 ]

efx_mcdi_get_board_cfg() uses a buffer for the firmware response that
is only large enough to hold subtypes for the originally defined set
of NVRAM partitions.  Longer responses are truncated, and we may read
off the end of the buffer when copying out subtypes for additional
partitions.  In particular, this can result in the MTD partition for
an FPGA bitfile being named e.g. 'eth5 sfc_fpga:00' when it should be
'eth5 sfc_fpga:01'.  This means the firmware update tool (sfupdate)
can't tell which bitfile should be written to the partition.

Correct the response buffer size.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotcp: force a dst refcount when prequeue packet
Eric Dumazet [Thu, 25 Apr 2013 01:34:55 +0000]
tcp: force a dst refcount when prequeue packet

[ Upstream commit 093162553c33e9479283e107b4431378271c735d ]

Before escaping RCU protected section and adding packet into
prequeue, make sure the dst is refcounted.

Reported-by: Mike Galbraith <bitbucket@online.de>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround)
Bjørn Mork [Thu, 18 Apr 2013 12:57:11 +0000]
net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround)

[ Upstream commit cc6ba5fdaabea7a7b28de3ba1e0fe54d92232fe5 ]

We normally trust and use the CDC functional descriptors provided by a
number of devices.  But some of these will erroneously list the address
reserved for the device end of the link.  Attempting to use this on
both the device and host side will naturally not work.

Work around this bug by ignoring the functional descriptor and assign a
random address instead in this case.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: qmi_wwan: fixup destination address (firmware bug workaround)
Bjørn Mork [Thu, 18 Apr 2013 12:57:10 +0000]
net: qmi_wwan: fixup destination address (firmware bug workaround)

[ Upstream commit 6483bdc9d76fb98174797516a19d289eb837909e ]

Received packets are sometimes addressed to 00:a0:c6:00:00:00
instead of the address the device firmware should have learned
from the host:

321.224126 77.16.85.204 -> 148.122.171.134 ICMP 98 Echo (ping) request  id=0x4025, seq=64/16384, ttl=64

0000  82 c0 82 c9 f1 67 82 c0 82 c9 f1 67 08 00 45 00   .....g.....g..E.
0010  00 54 00 00 40 00 40 01 57 cc 4d 10 55 cc 94 7a   .T..@.@.W.M.U..z
0020  ab 86 08 00 62 fc 40 25 00 40 b2 bc 6e 51 00 00   ....b.@%.@..nQ..
0030  00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15   ..k.............
0040  16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25   .......... !"#$%
0050  26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35   &'()*+,-./012345
0060  36 37                                             67

321.240607 148.122.171.134 -> 77.16.85.204 ICMP 98 Echo (ping) reply    id=0x4025, seq=64/16384, ttl=55

0000  00 a0 c6 00 00 00 02 50 f3 00 00 00 08 00 45 00   .......P......E.
0010  00 54 00 56 00 00 37 01 a0 76 94 7a ab 86 4d 10   .T.V..7..v.z..M.
0020  55 cc 00 00 6a fc 40 25 00 40 b2 bc 6e 51 00 00   U...j.@%.@..nQ..
0030  00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15   ..k.............
0040  16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25   .......... !"#$%
0050  26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35   &'()*+,-./012345
0060  36 37                                             67

The bogus address is always the same, and matches the address
suggested by many devices as a default address.  It is likely a
hardcoded firmware default.

The circumstances where this bug has been observed indicates that
the trigger is related to timing or some other factor the host
cannot control. Repeating the exact same configuration sequence
that caused it to trigger once, will not necessarily cause it to
trigger the next time. Reproducing the bug is therefore difficult.
This opens up a possibility that the bug is more common than we can
confirm, because affected devices often will work properly again
after a reset.  A procedure most users are likely to try out before
reporting a bug.

Unconditionally rewriting the destination address if the first digit
of the received packet is 0, is considered an acceptable compromise
since we already have to inspect this digit.  The simplification will
cause unnecessary rewrites if the real address starts with 0, but this
is still better than adding additional tests for this particular case.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet: qmi_wwan: fixup missing ethernet header (firmware bug workaround)
Bjørn Mork [Thu, 18 Apr 2013 12:57:09 +0000]
net: qmi_wwan: fixup missing ethernet header (firmware bug workaround)

[ Upstream commit 6ff509af3869ccac69dcf8905fc75b9a76951594 ]

A number of LTE devices from different vendors all suffer from the
same firmware bug: Most of the packets received from the device while
it is attached to a LTE network will not have an ethernet header. The
devices work as expected when attached to 2G or 3G networks, sending
an ethernet header with all packets.

This driver is not aware of which network the modem attached to, and
even if it were there are still some packet types which are always
received with the header intact.

All devices supported by this driver have severely limited
networking capabilities:
 - can only transmit IPv4, IPv6 and possibly ARP
 - can only support a single host hardware address at any time
 - will only do point-to-point communcation with the host

Because of this, we are able to reliably identify any bogus raw IP
packets by simply looking at the 4 IP version bits.  All we need to
do is to avoid 4 or 6 in the first digit of the mac address.  This
workaround ensures this, and fix up the received packets as necessary.

Given the distribution of the bug, it is believed that the source is
the chipset vendor.  The devices which are verified to be affected are:
 Huawei E392u-12 (Qualcomm MDM9200)
 Pantech UML290  (Qualcomm MDM9600)
 Novatel USB551L (Qualcomm MDM9600)
 Novatel E362    (Qualcomm MDM9600)

It is believed that the bug depend on firmware revision, which means
that possibly all devices based on the above mentioned chipset may be
affected if we consider all available firmware revisions.

The information about affected devices and versions is likely
incomplete.  As the additional overhead for packets not needing this
fixup is very small, it is considered acceptable to apply the
workaround to all devices handled by this driver.

Reported-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/mm: fix dump table BUG
Daniel Vetter [Sat, 20 Apr 2013 10:08:11 +0000]
drm/mm: fix dump table BUG

commit 3a359f0b21ab218c1bf7a6a1b638b6fd143d0b99 upstream.

In

commit 9e8944ab564f2e3dde90a518cd32048c58918608
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Thu Nov 15 11:32:17 2012 +0000

    drm: Introduce an iterator over holes in the drm_mm range manager

helpers and iterators for hole handling have been introduced with some
debug BUG_ONs sprinkled over. Unfortunately this broke the mm dumper
which unconditionally tried to compute the size of the very first
hole.

While at it unify the code a bit with the hole dumping in the loop.

v2: Extract a hole dump helper.

Reported-by: Christopher Harvey <charvey@matrox.com>
Cc: Christopher Harvey <charvey@matrox.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoB43: Handle DMA RX descriptor underrun
Thommy Jakobsson [Tue, 23 Apr 2013 19:45:11 +0000]
B43: Handle DMA RX descriptor underrun

commit 73b82bf0bfbf58e6ff328d3726934370585f6e78 upstream.

Add handling of rx descriptor underflow. This fixes a fault that could
happen on slow machines, where data is received faster than the CPU can
handle. In such a case the device will use up all rx descriptors and
refuse to send any more data before confirming that it is ok. This
patch enables necessary interrupt to discover such a situation and will
handle them by dropping everything in the ring buffer.

Reviewed-by: Michael Buesch <m@bues.ch>
Signed-off-by: Thommy Jakobsson <thommyj@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: fix setting of multicast filter
Daniel Drake [Wed, 8 May 2013 19:37:19 +0000]
mwifiex: fix setting of multicast filter

commit ccd384b10420ac81ba3fb9b0a7d18272c7173552 upstream.

A small bug in this code was causing the ALLMULTI filter to be set
when in fact we were just wanting to program a selective multicast list
to the hardware.

Fix that bug and remove a redundant if condition in the code that
follows.

This fixes wakeup behaviour when multicast WOL is enabled. Previously,
all multicast packets would wake up the system. Now, only those that the
host intended to receive trigger wakeups.

Signed-off-by: Daniel Drake <dsd@laptop.org>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agomwifiex: clear is_suspended flag when interrupt is received early
Bing Zhao [Tue, 7 May 2013 02:46:53 +0000]
mwifiex: clear is_suspended flag when interrupt is received early

commit 48795424acff7215d5eac0b52793a2c1eb3a6283 upstream.

When the XO-4 with 8787 wireless is woken up due to wake-on-WLAN
mwifiex is often flooded with "not allowed while suspended" messages
and the interface is unusable.

[  202.171609] int: sdio_ireg = 0x1
[  202.180700] info: mwifiex_process_hs_config: auto cancelling host
               sleep since there is interrupt from the firmware
[  202.201880] event: wakeup device...
[  202.211452] event: hs_deactivated
[  202.514638] info: --- Rx: Data packet ---
[  202.514753] data: 4294957544 BSS(0-0): Data <= kernel
[  202.514825] PREP_CMD: device in suspended state
[  202.514839] data: dequeuing the packet ec7248c0 ec4869c0
[  202.514886] mwifiex_write_data_sync: not allowed while suspended
[  202.514886] host_to_card, write iomem (1) failed: -1
[  202.514917] mwifiex_write_data_sync: not allowed while suspended
[  202.514936] host_to_card, write iomem (2) failed: -1
[  202.514949] mwifiex_write_data_sync: not allowed while suspended
[  202.514965] host_to_card, write iomem (3) failed: -1
[  202.514976] mwifiex_write_data_async failed: 0xFFFFFFFF

This can be readily reproduced when putting the XO-4 in a loop where
it goes to sleep due to inactivity, but then wakes up due to an
incoming ping. The error is hit within an hour or two.

This issue happens when an interrupt comes in early while host sleep
is still activated. Driver handles this case by auto cancelling host
sleep. However is_suspended flag is still set which prevents any cmd
or data from being sent to firmware. Fix it by clearing is_suspended
flag in this path.

Reported-by: Daniel Drake <dsd@laptop.org>
Tested-by: Daniel Drake <dsd@laptop.org>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoath9k: fix key allocation error handling for powersave keys
Felix Fietkau [Sat, 27 Apr 2013 09:47:01 +0000]
ath9k: fix key allocation error handling for powersave keys

commit 4ef69d0394cba8caa9f75d3f2e53429bfb8b3045 upstream.

If no keycache slots are available, ath_key_config can return -ENOSPC.
If the key index is not checked for errors, it can lead to logspam that
looks like this: "ath: wiphy0: keyreset: keycache entry 228 out of range"
This can cause follow-up errors if the invalid keycache index gets
used for tx.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopowerpc: Bring all threads online prior to migration/hibernation
Robert Jennings [Tue, 7 May 2013 04:34:11 +0000]
powerpc: Bring all threads online prior to migration/hibernation

commit 120496ac2d2d60aee68d3123a68169502a85f4b5 upstream.

This patch brings online all threads which are present but not online
prior to migration/hibernation.  After migration/hibernation those
threads are taken back offline.

During migration/hibernation all online CPUs must call H_JOIN, this is
required by the hypervisor.  Without this patch, threads that are offline
(H_CEDE'd) will not be woken to make the H_JOIN call and the OS will be
deadlocked (all threads either JOIN'd or CEDE'd).

Signed-off-by: Robert Jennings <rcj@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: limit group search loop for non-extent files
Lachlan McIlroy [Mon, 6 May 2013 03:10:00 +0000]
ext4: limit group search loop for non-extent files

commit e6155736ad76b2070652745f9e54cdea3f0d8567 upstream.

In the case where we are allocating for a non-extent file,
we must limit the groups we allocate from to those below
2^32 blocks, and ext4_mb_regular_allocator() attempts to
do this initially by putting a cap on ngroups for the
subsequent search loop.

However, the initial target group comes in from the
allocation context (ac), and it may already be beyond
the artificially limited ngroups.  In this case,
the limit

if (group == ngroups)
group = 0;

at the top of the loop is never true, and the loop will
run away.

Catch this case inside the loop and reset the search to
start at group 0.

[sandeen@redhat.com: add commit msg & comments]

Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotracing: Fix leaks of filter preds
Steven Rostedt (Red Hat) [Tue, 14 May 2013 19:40:48 +0000]
tracing: Fix leaks of filter preds

commit 60705c89460fdc7227f2d153b68b3f34814738a4 upstream.

Special preds are created when folding a series of preds that
can be done in serial. These are allocated in an ops field of
the pred structure. But they were never freed, causing memory
leaks.

This was discovered using the kmemleak checker:

unreferenced object 0xffff8800797fd5e0 (size 32):
  comm "swapper/0", pid 1, jiffies 4294690605 (age 104.608s)
  hex dump (first 32 bytes):
    00 00 01 00 03 00 05 00 07 00 09 00 0b 00 0d 00  ................
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
  backtrace:
    [<ffffffff814b52af>] kmemleak_alloc+0x73/0x98
    [<ffffffff8111ff84>] kmemleak_alloc_recursive.constprop.42+0x16/0x18
    [<ffffffff81120e68>] __kmalloc+0xd7/0x125
    [<ffffffff810d47eb>] kcalloc.constprop.24+0x2d/0x2f
    [<ffffffff810d4896>] fold_pred_tree_cb+0xa9/0xf4
    [<ffffffff810d3781>] walk_pred_tree+0x47/0xcc
    [<ffffffff810d5030>] replace_preds.isra.20+0x6f8/0x72f
    [<ffffffff810d50b5>] create_filter+0x4e/0x8b
    [<ffffffff81b1c30d>] ftrace_test_event_filter+0x5a/0x155
    [<ffffffff8100028d>] do_one_initcall+0xa0/0x137
    [<ffffffff81afbedf>] kernel_init_freeable+0x14d/0x1dc
    [<ffffffff814b24b7>] kernel_init+0xe/0xdb
    [<ffffffff814d539c>] ret_from_fork+0x7c/0xb0
    [<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotick: Cleanup NOHZ per cpu data on cpu down
Thomas Gleixner [Fri, 3 May 2013 13:02:50 +0000]
tick: Cleanup NOHZ per cpu data on cpu down

commit 4b0c0f294f60abcdd20994a8341a95c8ac5eeb96 upstream.

Prarit reported a crash on CPU offline/online. The reason is that on
CPU down the NOHZ related per cpu data of the dead cpu is not cleaned
up. If at cpu online an interrupt happens before the per cpu tick
device is registered the irq_enter() check potentially sees stale data
and dereferences a NULL pointer.

Cleanup the data after the cpu is dead.

Reported-by: Prarit Bhargava <prarit@redhat.com>
Cc: Mike Galbraith <bitbucket@online.de>
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1305031451561.2886@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotimer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE
Tirupathi Reddy [Tue, 14 May 2013 08:29:02 +0000]
timer: Don't reinitialize the cpu base lock during CPU_UP_PREPARE

commit 42a5cf46cd56f46267d2a9fcf2655f4078cd3042 upstream.

An inactive timer's base can refer to a offline cpu's base.

In the current code, cpu_base's lock is blindly reinitialized each
time a CPU is brought up. If a CPU is brought online during the period
that another thread is trying to modify an inactive timer on that CPU
with holding its timer base lock, then the lock will be reinitialized
under its feet. This leads to following SPIN_BUG().

<0> BUG: spinlock already unlocked on CPU#3, kworker/u:3/1466
<0> lock: 0xe3ebe000, .magic: dead4ead, .owner: kworker/u:3/1466, .owner_cpu: 1
<4> [<c0013dc4>] (unwind_backtrace+0x0/0x11c) from [<c026e794>] (do_raw_spin_unlock+0x40/0xcc)
<4> [<c026e794>] (do_raw_spin_unlock+0x40/0xcc) from [<c076c160>] (_raw_spin_unlock+0x8/0x30)
<4> [<c076c160>] (_raw_spin_unlock+0x8/0x30) from [<c009b858>] (mod_timer+0x294/0x310)
<4> [<c009b858>] (mod_timer+0x294/0x310) from [<c00a5e04>] (queue_delayed_work_on+0x104/0x120)
<4> [<c00a5e04>] (queue_delayed_work_on+0x104/0x120) from [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c)
<4> [<c04eae00>] (sdhci_msm_bus_voting+0x88/0x9c) from [<c04d8780>] (sdhci_disable+0x40/0x48)
<4> [<c04d8780>] (sdhci_disable+0x40/0x48) from [<c04bf300>] (mmc_release_host+0x4c/0xb0)
<4> [<c04bf300>] (mmc_release_host+0x4c/0xb0) from [<c04c7aac>] (mmc_sd_detect+0x90/0xfc)
<4> [<c04c7aac>] (mmc_sd_detect+0x90/0xfc) from [<c04c2504>] (mmc_rescan+0x7c/0x2c4)
<4> [<c04c2504>] (mmc_rescan+0x7c/0x2c4) from [<c00a6a7c>] (process_one_work+0x27c/0x484)
<4> [<c00a6a7c>] (process_one_work+0x27c/0x484) from [<c00a6e94>] (worker_thread+0x210/0x3b0)
<4> [<c00a6e94>] (worker_thread+0x210/0x3b0) from [<c00aad9c>] (kthread+0x80/0x8c)
<4> [<c00aad9c>] (kthread+0x80/0x8c) from [<c000ea80>] (kernel_thread_exit+0x0/0x8)

As an example, this particular crash occurred when CPU #3 is executing
mod_timer() on an inactive timer whose base is refered to offlined CPU
#2.  The code locked the timer_base corresponding to CPU #2. Before it
could proceed, CPU #2 came online and reinitialized the spinlock
corresponding to its base. Thus now CPU #3 held a lock which was
reinitialized. When CPU #3 finally ended up unlocking the old cpu_base
corresponding to CPU #2, we hit the above SPIN_BUG().

CPU #0 CPU #3        CPU #2
------ -------        -------
.....  ......       <Offline>
mod_timer()
 lock_timer_base
   spin_lock_irqsave(&base->lock)

cpu_up(2)  .....         ......
init_timers_cpu()
....  .....      spin_lock_init(&base->lock)
.....    spin_unlock_irqrestore(&base->lock)  ......
   <spin_bug>

Allocation of per_cpu timer vector bases is done only once under
"tvec_base_done[]" check. In the current code, spinlock_initialization
of base->lock isn't under this check. When a CPU is up each time the
base lock is reinitialized. Move base spinlock initialization under
the check.

Signed-off-by: Tirupathi Reddy <tirupath@codeaurora.org>
Link: http://lkml.kernel.org/r/1368520142-4136-1-git-send-email-tirupath@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoaudit: Syscall rules are not applied to existing processes on non-x86
Anton Blanchard [Tue, 8 Jan 2013 23:46:17 +0000]
audit: Syscall rules are not applied to existing processes on non-x86

commit cdee3904b4ce7c03d1013ed6dd704b43ae7fc2e9 upstream.

Commit b05d8447e782 (audit: inline audit_syscall_entry to reduce
burden on archs) changed audit_syscall_entry to check for a dummy
context before calling __audit_syscall_entry. Unfortunately the dummy
context state is maintained in __audit_syscall_entry so once set it
never gets cleared, even if the audit rules change.

As a result, if there are no auditing rules when a process starts
then it will never be subject to any rules added later. x86 doesn't
see this because it has an assembly fast path that calls directly into
__audit_syscall_entry.

I noticed this issue when working on audit performance optimisations.
I wrote a set of simple test cases available at:

http://ozlabs.org/~anton/junkcode/audit_tests.tar.gz

02_new_rule.py fails without the patch and passes with it. The
test case clears all rules, starts a process, adds a rule then
verifies the process produces a syscall audit record.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoSCSI: sd: fix array cache flushing bug causing performance problems
James Bottomley [Wed, 24 Apr 2013 21:02:53 +0000]
SCSI: sd: fix array cache flushing bug causing performance problems

commit 39c60a0948cc06139e2fbfe084f83cb7e7deae3b upstream.

Some arrays synchronize their full non volatile cache when the sd driver sends
a SYNCHRONIZE CACHE command.  Unfortunately, they can have Terrabytes of this
and we send a SYNCHRONIZE CACHE for every barrier if an array reports it has a
writeback cache.  This leads to massive slowdowns on journalled filesystems.

The fix is to allow userspace to turn off the writeback cache setting as a
temporary measure (i.e. without doing the MODE SELECT to write it back to the
device), so even though the device reported it has a writeback cache, the
user, knowing that the cache is non volatile and all they care about is
filesystem correctness, can turn that bit off in the kernel and avoid the
performance ruinous (and safety irrelevant) SYNCHRONIZE CACHE commands.

The way you do this is add a 'temporary' prefix when performing the usual
cache setting operations, so

echo temporary write through > /sys/class/scsi_disk/<disk>/cache_type

Reported-by: Ric Wheeler <rwheeler@redhat.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxen/vcpu/pvhvm: Fix vcpu hotplugging hanging.
Konrad Rzeszutek Wilk [Sun, 5 May 2013 13:30:09 +0000]
xen/vcpu/pvhvm: Fix vcpu hotplugging hanging.

commit 7f1fc268c47491fd5e63548f6415fc8604e13003 upstream.

If a user did:

echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online

we would (this a build with DEBUG enabled) get to:
smpboot: ++++++++++++++++++++=_---CPU UP  1
.. snip..
smpboot: Stack at about ffff880074c0ff44
smpboot: CPU1: has booted.

and hang. The RCU mechanism would kick in an try to IPI the CPU1
but the IPIs (and all other interrupts) would never arrive at the
CPU1. At first glance at least. A bit digging in the hypervisor
trace shows that (using xenanalyze):

[vla] d4v1 vec 243 injecting
   0.043163027 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
]  0.043163639 --|x d4v1 vmentry cycles 1468
]  0.043164913 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
   0.043164913 --|x d4v1 inj_virq vec 243  real
  [vla] d4v1 vec 243 injecting
   0.043164913 --|x d4v1 intr_window vec 243 src 5(vector) intr f3
]  0.043165526 --|x d4v1 vmentry cycles 1472
]  0.043166800 --|x d4v1 vmexit exit_reason PENDING_INTERRUPT eip ffffffff81673254
   0.043166800 --|x d4v1 inj_virq vec 243  real
  [vla] d4v1 vec 243 injecting

there is a pending event (subsequent debugging shows it is the IPI
from the VCPU0 when smpboot.c on VCPU1 has done
"set_cpu_online(smp_processor_id(), true)") and the guest VCPU1 is
interrupted with the callback IPI (0xf3 aka 243) which ends up calling
__xen_evtchn_do_upcall.

The __xen_evtchn_do_upcall seems to do *something* but not acknowledge
the pending events. And the moment the guest does a 'cli' (that is the
ffffffff81673254 in the log above) the hypervisor is invoked again to
inject the IPI (0xf3) to tell the guest it has pending interrupts.
This repeats itself forever.

The culprit was the per_cpu(xen_vcpu, cpu) pointer. At the bootup
we set each per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] but later on use the VCPUOP_register_vcpu_info
to register per-CPU  structures (xen_vcpu_setup).
This is used to allow events for more than 32 VCPUs and for performance
optimizations reasons.

When the user performs the VCPU hotplug we end up calling the
the xen_vcpu_setup once more. We make the hypercall which returns
-EINVAL as it does not allow multiple registration calls (and
already has re-assigned where the events are being set). We pick
the fallback case and set per_cpu(xen_vcpu, cpu) to point to the
shared_info->vcpu_info[vcpu] (which is a good fallback during bootup).
However the hypervisor is still setting events in the register
per-cpu structure (per_cpu(xen_vcpu_info, cpu)).

As such when the events are set by the hypervisor (such as timer one),
and when we iterate in __xen_evtchn_do_upcall we end up reading stale
events from the shared_info->vcpu_info[vcpu] instead of the
per_cpu(xen_vcpu_info, cpu) structures. Hence we never acknowledge the
events that the hypervisor has set and the hypervisor keeps on reminding
us to ack the events which we never do.

The fix is simple. Don't on the second time when xen_vcpu_setup is
called over-write the per_cpu(xen_vcpu, cpu) if it points to
per_cpu(xen_vcpu_info).

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agohp_accel: Ignore the error from lis3lv02d_poweron() at resume
Shuah Khan [Sat, 9 Mar 2013 18:39:22 +0000]
hp_accel: Ignore the error from lis3lv02d_poweron() at resume

commit 7783819920ca52fc582a2782f654fe6ed373f465 upstream.

The error in lis3lv02_poweron() is harmless in the resume path, so
we should ignore it. It is inline with the other usages of lis3lv02_poweron()
and matches the 3.0 code for this routine. This patch is in suse git and
might have missed making it into the mainline.
opensuse - commit id: 66ccdac87c322cf7af12bddba8c805af640b1cff

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Shuah Khan <shuah.khan@hp.com>
Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonfsd4: don't allow owner override on 4.1 CLAIM_FH opens
J. Bruce Fields [Fri, 3 May 2013 20:09:09 +0000]
nfsd4: don't allow owner override on 4.1 CLAIM_FH opens

commit 9f415eb25574db4b73a9a712a4438e41dc284922 upstream.

The Linux client is using CLAIM_FH to implement regular opens, not just
recovery cases, so it depends on the server to check permissions
correctly.

Therefore the owner override, which may make sense in the delegation
recovery case, isn't right in the CLAIM_FH case.

Symptoms: on a client with 49f9a0fafd844c32f2abada047c0b9a5ba0d6255
"NFSv4.1: Enable open-by-filehandle", Bryan noticed this:

touch test.txt
chmod 000 test.txt
echo test > test.txt

succeeding.

Reported-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodm snapshot: fix error return code in snapshot_ctr
Wei Yongjun [Fri, 10 May 2013 13:37:15 +0000]
dm snapshot: fix error return code in snapshot_ctr

commit 09e8b813897a0f85bb401435d009228644c81214 upstream.

Return -ENOMEM instead of success if unable to allocate pending
exception mempool in snapshot_ctr.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoALSA: HDA: Fix Oops caused by dereference NULL pointer
Wang YanQing [Tue, 7 May 2013 03:27:33 +0000]
ALSA: HDA: Fix Oops caused by dereference NULL pointer

commit 2195b063f6609e4c6268f291683902f25eaf9aa6 upstream.

The interrupt handler azx_interrupt will call azx_update_rirb,
which may call snd_hda_queue_unsol_event, snd_hda_queue_unsol_event
will dereference chip->bus pointer.

The problem is we alloc chip->bus in azx_codec_create
which will be called after we enable IRQ and enable unsolicited
event in azx_probe.

This will cause Oops due dereference NULL pointer. I meet it, good luck:)

[Rearranged the NULL check before the tracepoint and added another
 NULL check of bus->workq -- tiwai]

Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoACPICA: Fix possible buffer overflow during a field unit read operation
Bob Moore [Wed, 8 May 2013 04:01:15 +0000]
ACPICA: Fix possible buffer overflow during a field unit read operation

commit 61388f9e5d93053cf399a356414f31f9b4814c6d upstream.

Can only happen under these conditions: 1) The DSDT version is 1,
meaning integers are 32-bits.  2) The field is between 33 and 64
bits long.

It applies cleanly back to ACPICA 20100806+ (Linux v2.6.37+).

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoASoC: wm8994: missing break in wm8994_aif3_hw_params()
Dan Carpenter [Tue, 30 Apr 2013 07:24:41 +0000]
ASoC: wm8994: missing break in wm8994_aif3_hw_params()

commit 4495e46fe18f198366961bb2b324a694ef8a9b44 upstream.

The missing break here means that we always return early and the
function is a no-op.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices
Aaro Koskinen [Wed, 8 May 2013 23:48:00 +0000]
ARM: OMAP: RX-51: change probe order of touchscreen and panel SPI devices

commit e65f131a14726e5f1b880a528271a52428e5b3a5 upstream.

Commit 9fdca9df (spi: omap2-mcspi: convert to module_platform_driver)
broke the SPI display/panel driver probe on RX-51/N900. The exact cause is
not fully understood, but it seems to be related to the probe order. SPI
communication to the panel driver (spi1.2) fails unless the touchscreen
(spi1.0) has been probed/initialized before. When the omap2-mcspi driver
was converted to a platform driver, it resulted in that the devices are
probed immediately after the board registers them in the order they are
listed in the board file.

Fix the issue by moving the touchscreen before the panel in the SPI
device list.

The patch fixes the following failure:

[    1.260955] acx565akm spi1.2: invalid display ID
[    1.265899] panel-acx565akm display0: acx_panel_probe panel detect error
[    1.273071] omapdss CORE error: driver probe failed: -19

Tested-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Pali Rohár <pali.rohar@gmail.com>
Cc: Joni Lapilainen <joni.lapilainen@gmail.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoKVM: VMX: fix halt emulation while emulating invalid guest sate
Gleb Natapov [Wed, 8 May 2013 15:38:44 +0000]
KVM: VMX: fix halt emulation while emulating invalid guest sate

commit 8d76c49e9ffeee839bc0b7a3278a23f99101263e upstream.

The invalid guest state emulation loop does not check halt_request
which causes 100% cpu loop while guest is in halt and in invalid
state, but more serious issue is that this leaves halt_request set, so
random instruction emulated by vm86 #GP exit can be interpreted
as halt which causes guest hang. Fix both problems by handling
halt_request in emulation loop.

Reported-by: Tomas Papan <tomas.papan@gmail.com>
Tested-by: Tomas Papan <tomas.papan@gmail.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.45
Greg Kroah-Hartman [Sat, 11 May 2013 20:48:35 +0000]
Linux 3.4.45

6 years agox86/mm: account for PGDIR_SIZE alignment
Jerry Hoemann [Tue, 30 Apr 2013 21:15:55 +0000]
x86/mm: account for PGDIR_SIZE alignment

Patch for -stable.  Function find_early_table_space removed upstream.

Fixes panic in alloc_low_page due to pgt_buf overflow during
init_memory_mapping.

find_early_table_space sizes pgt_buf based upon the size of the
memory being mapped, but it does not take into account the alignment
of the memory.  When the region being mapped spans a 512GB (PGDIR_SIZE)
alignment, a panic from alloc_low_pages occurs.

kernel_physical_mapping_init takes into account PGDIR_SIZE alignment.
This causes an extra call to alloc_low_page to be made.  This extra call
isn't accounted for by find_early_table_space and causes a kernel panic.

Change is to take into account PGDIR_SIZE alignment in find_early_table_space.

Signed-off-by: Jerry Hoemann <jerry.hoemann@hp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agokernel/audit_tree.c: tree will leak memory when failure occurs in audit_trim_trees()
Chen Gang [Mon, 29 Apr 2013 22:05:19 +0000]
kernel/audit_tree.c: tree will leak memory when failure occurs in audit_trim_trees()

commit 12b2f117f3bf738c1a00a6f64393f1953a740bd4 upstream.

audit_trim_trees() calls get_tree().  If a failure occurs we must call
put_tree().

[akpm@linux-foundation.org: run put_tree() before mutex_lock() for small scalability improvement]
Signed-off-by: Chen Gang <gang.chen@asianux.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agotracing: Fix ftrace_dump()
Steven Rostedt (Red Hat) [Fri, 15 Mar 2013 17:10:35 +0000]
tracing: Fix ftrace_dump()

commit 7fe70b579c9e3daba71635e31b6189394e7b79d3 upstream.

ftrace_dump() had a lot of issues. What ftrace_dump() does, is when
ftrace_dump_on_oops is set (via a kernel parameter or sysctl), it
will dump out the ftrace buffers to the console when either a oops,
panic, or a sysrq-z occurs.

This was written a long time ago when ftrace was fragile to recursion.
But it wasn't written well even for that.

There's a possible deadlock that can occur if a ftrace_dump() is happening
and an NMI triggers another dump. This is because it grabs a lock
before checking if the dump ran.

It also totally disables ftrace, and tracing for no good reasons.

As the ring_buffer now checks if it is read via a oops or NMI, where
there's a chance that the buffer gets corrupted, it will disable
itself. No need to have ftrace_dump() do the same.

ftrace_dump() is now cleaned up where it uses an atomic counter to
make sure only one dump happens at a time. A simple atomic_inc_return()
is enough that is needed for both other CPUs and NMIs. No need for
a spinlock, as if one CPU is running the dump, no other CPU needs
to do it too.

The tracing_on variable is turned off and not turned on. The original
code did this, but it wasn't pretty. By just disabling this variable
we get the result of not seeing traces that happen between crashes.

For sysrq-z, it doesn't get turned on, but the user can always write
a '1' to the tracing_on file. If they are using sysrq-z, then they should
know about tracing_on.

The new code is much easier to read and less error prone. No more
deadlock possibility when an NMI triggers here.

Reported-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: fix handling of v6 power tables
Alex Deucher [Wed, 1 May 2013 18:34:54 +0000]
drm/radeon: fix handling of v6 power tables

commit 441e76ca83ac604eaf0f046def96d8e3a27eea28 upstream.

The code was mis-handling variable sized arrays.

Reported-by: Sylvain BERTRAND <sylware@legeek.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: add new richland pci ids
Alex Deucher [Thu, 25 Apr 2013 18:06:05 +0000]
drm/radeon: add new richland pci ids

commit 62d1f92e06aef9665d71ca7e986b3047ecf0b3c7 upstream.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: fix possible segfault when parsing pm tables
Alex Deucher [Thu, 25 Apr 2013 13:29:17 +0000]
drm/radeon: fix possible segfault when parsing pm tables

commit f8e6bfc2ce162855fa4f9822a45659f4b542c960 upstream.

If we have a empty power table, bail early and allocate
the default power state.

Should fix:
https://bugs.freedesktop.org/show_bug.cgi?id=63865

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: fix endian bugs in atom_allocate_fb_scratch()
Alex Deucher [Wed, 24 Apr 2013 18:39:31 +0000]
drm/radeon: fix endian bugs in atom_allocate_fb_scratch()

commit beb71fc61c2cad64e347f164991b8ef476529e64 upstream.

Reviwed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon/evergreen+: don't enable HPD interrupts on eDP/LVDS
Alex Deucher [Thu, 11 Apr 2013 16:45:34 +0000]
drm/radeon/evergreen+: don't enable HPD interrupts on eDP/LVDS

commit 2e97be73e5f74a317232740ae82eb8f95326a660 upstream.

Avoids potential interrupt storms when the display is disabled.

May fix:
https://bugzilla.kernel.org/show_bug.cgi?id=56041

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: add some new SI PCI ids
Alex Deucher [Thu, 25 Apr 2013 17:55:15 +0000]
drm/radeon: add some new SI PCI ids

commit 18932a28419596bc9403770f5d8a108c5433fe59 upstream.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: disable the crtcs in mc_stop (evergreen+) (v2)
Alex Deucher [Wed, 10 Apr 2013 23:08:14 +0000]
drm/radeon: disable the crtcs in mc_stop (evergreen+) (v2)

commit abf1457bbbe4c62066bd03c6d31837dea28644dc upstream.

Just disabling the mem requests should be enough, but
that doesn't seem to work correctly on efi systems.

May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=57567
https://bugs.freedesktop.org/show_bug.cgi?id=43655
https://bugzilla.kernel.org/show_bug.cgi?id=56441

v2: blank displays first, then disable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: properly lock disp in mc_stop/resume for evergreen+
Alex Deucher [Wed, 10 Apr 2013 13:58:42 +0000]
drm/radeon: properly lock disp in mc_stop/resume for evergreen+

commit 968c01664ccbe0e46c19a1af662c4c266a904203 upstream.

Need to wait for the new addresses to take affect before
re-enabling the MC.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon/dce6: add missing display reg for tiling setup
Alex Deucher [Fri, 5 Apr 2013 14:28:08 +0000]
drm/radeon/dce6: add missing display reg for tiling setup

commit 7c1c7c18fc752b2a1d07597286467ef186312463 upstream.

A new tiling config register for the display blocks was
added on DCE6.

May fix:
https://bugs.freedesktop.org/show_bug.cgi?id=62889
https://bugs.freedesktop.org/show_bug.cgi?id=57919

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/radeon: don't use get_engine_clock() on APUs
Alex Deucher [Mon, 18 Mar 2013 21:12:50 +0000]
drm/radeon: don't use get_engine_clock() on APUs

commit bf05d9985111f85ed6922c134567b96eb789283b upstream.

It doesn't work reliably.  Just report back the currently
selected engine clock.

Partially fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=62493

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: Fall back to bit banging mode for DVO transmitter detection
David Müller [Fri, 19 Apr 2013 08:41:50 +0000]
drm/i915: Fall back to bit banging mode for DVO transmitter detection

commit e4bfff54ed3f5de88f5358504c78c2cb037813aa upstream.

As discussed in this thread
http://lists.freedesktop.org/archives/dri-devel/2013-April/037411.html
GMBUS based DVO transmitter detection seems to be unreliable which could
result in an unusable DVO port.

The attached patch fixes this by falling back to bit banging mode for
the time DVO transmitter detection is in progress.

Signed-off-by: David Müller <d.mueller@elsoft.ch>
Tested-by: David Müller <d.mueller@elsoft.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agodrm/i915: Add no-lvds quirk for Fujitsu Esprimo Q900
Christian Lamparter [Wed, 3 Apr 2013 12:34:11 +0000]
drm/i915: Add no-lvds quirk for Fujitsu Esprimo Q900

commit 9e9dd0e889c76c786e8f2e164c825c3c06dea30c upstream.

The "Mobile Sandy Bridge CPUs" in the Fujitsu Esprimo Q900
mini desktop PCs are probably misleading the LVDS detection
code in intel_lvds_supported. Nothing is connected to the
LVDS ports in these systems.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agocpufreq / Longhaul: Disable driver by default
Rafał Bilski [Fri, 14 Dec 2012 23:45:02 +0000]
cpufreq / Longhaul: Disable driver by default

commit b5811bc469c0dbebb4f947800b9b234a9c0a68dc upstream.

This is only solution I can think of. User decides if he wants this
driver on his machine. I don't have enough knowledge and time to find
the reason why same code works on some machines and doesn't on others
which use the same, or very similar, chipset and processor.

Signed-off-by: Rafał Bilski <rafalbilski@interia.pl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agor8169: fix 8168evl frame padding.
Stefan Bader [Fri, 26 Apr 2013 13:49:32 +0000]
r8169: fix 8168evl frame padding.

commit e5195c1f31f399289347e043d6abf3ffa80f0005 upstream.

Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: hayeswang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoext4: add check for inodes_count overflow in new resize ioctl
Theodore Ts'o [Mon, 22 Apr 2013 02:56:32 +0000]
ext4: add check for inodes_count overflow in new resize ioctl

commit 3f8a6411fbada1fa482276591e037f3b1adcf55b upstream.

Addresses-Red-Hat-Bugzilla: #913245

Reported-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Lingzhu Xiang <lxiang@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoipvs: ip_vs_sip_fill_param() BUG: bad check of return value
Hans Schillstrom [Sat, 27 Apr 2013 18:06:14 +0000]
ipvs: ip_vs_sip_fill_param() BUG: bad check of return value

commit f7a1dd6e3ad59f0cfd51da29dfdbfd54122c5916 upstream.

The reason for this patch is crash in kmemdup
caused by returning from get_callid with uniialized
matchoff and matchlen.

Removing Zero check of matchlen since it's done by ct_sip_get_header()

BUG: unable to handle kernel paging request at ffff880457b5763f
IP: [<ffffffff810df7fc>] kmemdup+0x2e/0x35
PGD 27f6067 PUD 0
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: xt_state xt_helper nf_conntrack_ipv6 nf_defrag_ipv6 ip6table_mangle xt_connmark xt_conntrack ip6_tables nf_conntrack_ftp ip_vs_ftp nf_nat xt_tcpudp iptable_mangle xt_mark ip_tables x_tables ip_vs_rr ip_vs_lblcr ip_vs_pe_sip ip_vs nf_conntrack_sip nf_conntrack bonding igb i2c_algo_bit i2c_core
CPU 5
Pid: 0, comm: swapper/5 Not tainted 3.9.0-rc5+ #5                  /S1200KP
RIP: 0010:[<ffffffff810df7fc>]  [<ffffffff810df7fc>] kmemdup+0x2e/0x35
RSP: 0018:ffff8803fea03648  EFLAGS: 00010282
RAX: ffff8803d61063e0 RBX: 0000000000000003 RCX: 0000000000000003
RDX: 0000000000000003 RSI: ffff880457b5763f RDI: ffff8803d61063e0
RBP: ffff8803fea03658 R08: 0000000000000008 R09: 0000000000000011
R10: 0000000000000011 R11: 00ffffffff81a8a3 R12: ffff880457b5763f
R13: ffff8803d67f786a R14: ffff8803fea03730 R15: ffffffffa0098e90
FS:  0000000000000000(0000) GS:ffff8803fea00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff880457b5763f CR3: 0000000001a0c000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper/5 (pid: 0, threadinfo ffff8803ee18c000, task ffff8803ee18a480)
Stack:
 ffff8803d822a080 000000000000001c ffff8803fea036c8 ffffffffa000937a
 ffffffff81f0d8a0 000000038135fdd5 ffff880300000014 ffff880300110000
 ffffffff150118ac ffff8803d7e8a000 ffff88031e0118ac 0000000000000000
Call Trace:
 <IRQ>

 [<ffffffffa000937a>] ip_vs_sip_fill_param+0x13a/0x187 [ip_vs_pe_sip]
 [<ffffffffa007b209>] ip_vs_sched_persist+0x2c6/0x9c3 [ip_vs]
 [<ffffffff8107dc53>] ? __lock_acquire+0x677/0x1697
 [<ffffffff8100972e>] ? native_sched_clock+0x3c/0x7d
 [<ffffffff8100972e>] ? native_sched_clock+0x3c/0x7d
 [<ffffffff810649bc>] ? sched_clock_cpu+0x43/0xcf
 [<ffffffffa007bb1e>] ip_vs_schedule+0x181/0x4ba [ip_vs]
...

Signed-off-by: Hans Schillstrom <hans@schillstrom.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoxhci: Don't warn on empty ring for suspended devices.
Sarah Sharp [Mon, 18 Mar 2013 17:19:51 +0000]
xhci: Don't warn on empty ring for suspended devices.

commit a83d6755814e4614ba77e15d82796af0f695c6b8 upstream.

When a device attached to the roothub is suspended, the endpoint rings
are stopped.  The host may generate a completion event with the
completion code set to 'Stopped' or 'Stopped Invalid' when the ring is
halted.  The current xHCI code prints a warning in that case, which can
be really annoying if the USB device is coming into and out of suspend.

Remove the unnecessary warning.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Stephen Hemminger <stephen@networkplumber.org>
Cc: Luis Henriques <luis.henriques@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoperf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL
Peter Zijlstra [Fri, 3 May 2013 12:11:25 +0000]
perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL

commit 7cc23cd6c0c7d7f4bee057607e7ce01568925717 upstream.

We should always have proper privileges when requesting kernel
data.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20130503121256.230745028@chello.nl
[ Fix build error reported by fengguang.wu@intel.com, propagate error code back. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-v0x9ky3ahzr6nm3c6ilwrili@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoperf/x86/intel/lbr: Fix LBR filter
Peter Zijlstra [Fri, 3 May 2013 12:11:24 +0000]
perf/x86/intel/lbr: Fix LBR filter

commit 6e15eb3ba6c0249c9e8c783517d131b47db995ca upstream.

The LBR 'from' adddress is under full userspace control; ensure
we validate it before reading from it.

Note: is_module_text_address() can potentially be quite
expensive; for those running into that with high overhead
in modules optimize it using an RCU backed rb-tree.

Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20130503121256.158211806@chello.nl
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-mk8i82ffzax01cnqo829iy1q@git.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agonet/eth/ibmveth: Fixup retrieval of MAC address
Benjamin Herrenschmidt [Fri, 3 May 2013 17:19:01 +0000]
net/eth/ibmveth: Fixup retrieval of MAC address

commit 13f85203e1060da83d9ec1c1c5a63343eaab8de4 upstream.

Some ancient pHyp versions used to create a 8 bytes local-mac-address
property in the device-tree instead of a 6 bytes one for veth.

The Linux driver code to deal with that is an insane hack which also
happens to break with some choices of MAC addresses in qemu by testing
for a bit in the address rather than just looking at the size of the
property.

Sanitize this by doing the latter instead.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoautofs - remove autofs dentry mount check
David Jeffery [Mon, 6 May 2013 05:49:30 +0000]
autofs - remove autofs dentry mount check

commit ce8a5dbdf9e709bdaf4618d7ef8cceb91e8adc69 upstream.

When checking if an autofs mount point is busy it isn't sufficient to
only check if it's a mount point.

For example, if the mount of an offset mountpoint in a tree is denied
for this host by its export and the dentry becomes a process working
directory the check incorrectly returns the mount as not in use at
expire.

This can happen since the default when mounting within a tree is
nostrict, which means ingnore mount fails on mounts within the tree and
continue.  The nostrict option is meant to allow mounting in this case.

Signed-off-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopowerpc: fix numa distance for form0 device tree
Vaidyanathan Srinivasan [Fri, 22 Mar 2013 05:49:35 +0000]
powerpc: fix numa distance for form0 device tree

commit 7122beeee7bc1757682049780179d7c216dd1c83 upstream.

The following commit breaks numa distance setup for old powerpc
systems that use form0 encoding in device tree.

commit 41eab6f88f24124df89e38067b3766b7bef06ddb
powerpc/numa: Use form 1 affinity to setup node distance

Device tree node /rtas/ibm,associativity-reference-points would
index into /cpus/PowerPCxxxx/ibm,associativity based on form0 or
form1 encoding detected by ibm,architecture-vec-5 property.

All modern systems use form1 and current kernel code is correct.
However, on older systems with form0 encoding, the numa distance
will get hard coded as LOCAL_DISTANCE for all nodes.  This causes
task scheduling anomaly since scheduler will skip building numa
level domain (topmost domain with all cpus) if all numa distances
are same.  (value of 'level' in sched_init_numa() will remain 0)

Prior to the above commit:
((from) == (to) ? LOCAL_DISTANCE : REMOTE_DISTANCE)

Restoring compatible behavior with this patch for old powerpc systems
with device tree where numa distance are encoded as form0.

Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agopowerpc: Emulate non privileged DSCR read and write
Anton Blanchard [Wed, 1 May 2013 20:06:33 +0000]
powerpc: Emulate non privileged DSCR read and write

commit 73d2fb758e678c93bc76d40876c2359f0729b0ef upstream.

POWER8 allows read and write of the DSCR in userspace. We added
kernel emulation so applications could always use the instructions
regardless of the CPU type.

Unfortunately there are two SPRs for the DSCR and we only added
emulation for the privileged one. Add code to match the non
privileged one.

A simple test was created to verify the fix:

http://ozlabs.org/~anton/junkcode/user_dscr_test.c

Without the patch we get a SIGILL and it passes with the patch.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoLinux 3.4.44
Greg Kroah-Hartman [Wed, 8 May 2013 03:17:26 +0000]
Linux 3.4.44

6 years agomfd: adp5520: Restore mode bits on resume
Lars-Peter Clausen [Tue, 19 Feb 2013 10:51:22 +0000]
mfd: adp5520: Restore mode bits on resume

commit c6cc25fda58da8685ecef3f179adc7b99c8253b2 upstream.

The adp5520 unfortunately also clears the BL_EN bit when the nSTNDBY bit is
cleared. So we need to make sure to restore it during resume if it was set
before suspend.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agommc: atmel-mci: pio hang on block errors
Terry Barnaby [Mon, 8 Apr 2013 16:05:47 +0000]
mmc: atmel-mci: pio hang on block errors

commit bdbc5d0c60f3e9de3eeccf1c1a18bdc11dca62cc upstream.

The driver is doing, by default, multi-block reads. When a block error
occurs, card/block.c instigates a single block read: "mmcblk0: retrying
using single block read".  It leaves the sg chain intact and just changes
the length attribute for the first sg entry and the overall sg_len
parameter.  When atmci_read_data_pio is called to read the single block
of data it ignores the sg_len and expects to read more than 512 bytes as
it sees there are multiple items in the sg list. No more data comes as
the controller has only been commanded to get one block.

Signed-off-by: Terry Barnaby <terry@beam.ltd.uk>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agommc: core: Fix bit width test failing on old eMMC cards
Philip Rakity [Thu, 4 Apr 2013 19:18:11 +0000]
mmc: core: Fix bit width test failing on old eMMC cards

commit 836dc2fe89c968c10cada87e0dfae6626f8f9da3 upstream.

PARTITION_SUPPORT needs to be set before doing the compare on version
number so the bit width test does not get invalid data.  Before this
patch, a Sandisk iNAND eMMC card would detect 1-bit width although
the hardware supports 4-bit.

Only affects old emmc devices - pre 4.4 devices.

Reported-by: Elad Yi <elad.yi@gmail.com>
Signed-off-by: Philip Rakity <prakity@yahoo.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agox86: Eliminate irq_mis_count counted in arch_irq_stat
Li Fei [Fri, 26 Apr 2013 12:50:11 +0000]
x86: Eliminate irq_mis_count counted in arch_irq_stat

commit f7b0e1055574ce06ab53391263b4e205bf38daf3 upstream.

With the current implementation, kstat_cpu(cpu).irqs_sum is also
increased in case of irq_mis_count increment.

So there is no need to count irq_mis_count in arch_irq_stat,
otherwise irq_mis_count will be counted twice in the sum of
/proc/stat.

Reported-by: Liu Chuansheng <chuansheng.liu@intel.com>
Signed-off-by: Li Fei <fei.li@intel.com>
Acked-by: Liu Chuansheng <chuansheng.liu@intel.com>
Cc: tomoki.sekiyama.qu@hitachi.com
Cc: joe@perches.com
Link: http://lkml.kernel.org/r/1366980611.32469.7.camel@fli24-HP-Compaq-8100-Elite-CMT-PC
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agoKVM: X86 emulator: fix source operand decoding for 8bit mov[zs]x instructions
Gleb Natapov [Wed, 24 Apr 2013 10:38:36 +0000]
KVM: X86 emulator: fix source operand decoding for 8bit mov[zs]x instructions

commit 660696d1d16a71e15549ce1bf74953be1592bcd3 upstream.

Source operand for one byte mov[zs]x is decoded incorrectly if it is in
high byte register. Fix that.

Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

6 years agommc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload
Johan Hovold [Wed, 13 Mar 2013 16:11:59 +0000]
mmc: at91/avr32/atmel-mci: fix DMA-channel leak on module unload

commit 91cf54feecf815bec0b6a8d6d9dbd0e219f2f2cc upstream.

Fix regression introduced by commit 796211b7953 ("mmc: atmel-mci: add
pdc support and runtime capabilities detection") which removed the need
for CONFIG_MMC_ATMELMCI_DMA but kept the Kconfig-entry as well as the
compile guards around dma_release_channel() in remove(). Consequently,
DMA is always enabled (if supported), but the DMA-channel is not
released on module unload unless the DMA-config option is selected.

Remove the no longer used CONFIG_MMC_ATMELMCI_DMA option completely.

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>