9 years agoperf_event, x86: Annotate init functions and data
Hiroshi Shimamoto [Thu, 12 Nov 2009 02:25:34 +0000]
perf_event, x86: Annotate init functions and data

Annotate init functions and data with __init and __initconst.

Signed-off-by: Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@gmail.com>
LKML-Reference: <4AFB721E.8070203@ct.jp.nec.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Test -fstack-protector-all compiler option for inclusion in CFLAGS
Michael Cree [Wed, 11 Nov 2009 07:43:03 +0000]
perf tools: Test -fstack-protector-all compiler option for inclusion in CFLAGS

Some architectures (e.g. Alpha) do not support the
-fstack-protector-all compiler option and the use of the option
with -Werror causes the compiler to abort and the build fails.

Test that the compiler supports -fstack-protector-all before
inclusion in CFLAGS.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <20091111074302.GA3728@omega>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Bring linear set of section headers for features
Frederic Weisbecker [Wed, 11 Nov 2009 03:51:07 +0000]
perf tools: Bring linear set of section headers for features

Build a set of section headers for features right after the
datas. Each implemented feature will have one of such section
header that provides the offset and the size of the data
manipulated by the feature.

The trace informations have moved after the data and are
recorded on exit time.

The new layout is as follows:

 -----------------------
                             ___
 [ magic               ]      |
 [ header size         ]      |
 [ attr size           ]      |
 [ attr content offset ]      |
 [ attr content size   ]      |
 [ data offset         ]  File Headers
 [ data size           ]      |
 [ event_types offset  ]      |
 [ event_types size    ]      |
 [ feature bitmap      ]      v

 [ attr section        ]
 [ events section      ]

                             ___
 [         X           ]      |
 [         X           ]      |
 [         X           ]    Datas
 [         X           ]      |
 [         X           ]      v

                             ___
 [ Feature 1 offset    ]      |
 [ Feature 1 size      ] Features headers
 [ Feature 2 offset    ]      |
 [ Feature 2 size      ]      v

 [ Feature 1 content   ]
 [ Feature 2 content   ]
 -----------------------

We have as many feature's section headers as we have features in
use for the current file.

Say Feat 1 and Feat 3 are used by the file, but not Feat 2. Then
the feature headers will be like follows:

[ Feature 1 offset    ]      |
[ Feature 1 size      ] Features headers
[ Feature 3 offset    ]      |
[ Feature 3 size      ]      v

There is no hole to cover Feature 2 that is not in use here. We
only need to cover the needed headers in order, from the lowest
feature bit to the highest.

Currently we have two features: HEADER_TRACE_INFO and
HEADER_BUILD_ID. Both have their contents that follow the
feature headers. Putting the contents right after the feature
headers is not mandatory though. While we keep the feature
headers right after the data and in order, their offsets can
point everywhere. We have just put the two above feature
contents in the end of the file for convenience.

The purpose of this layout change is to have a file format that
scales while keeping it simple: having such linear feature
headers is less error prone wrt forward/backward compatibility
as the content of a feature can be put anywhere, its location
can even change by the time, it's fine because its headers will
tell where it is. And we know how to find these headers,
following the above rules.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-6-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Use perf_header__set/has_feat whenever possible
Frederic Weisbecker [Wed, 11 Nov 2009 03:51:06 +0000]
perf tools: Use perf_header__set/has_feat whenever possible

And drop the alternate checks/sets using set_bit or other kind
of helpers.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-5-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Read the build-ids from the header layer
Frederic Weisbecker [Wed, 11 Nov 2009 03:51:05 +0000]
perf tools: Read the build-ids from the header layer

Keep the build-ids reading implementation in the data mapping
but move its call to the headers so that we have a better
control on it (offset seeking, size passing, etc..).

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-4-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Split up build id saving into fetch and write
Frederic Weisbecker [Wed, 11 Nov 2009 03:51:04 +0000]
perf tools: Split up build id saving into fetch and write

We are saving the build id once we stop the profiling. And only
after doing that we know if we need to set that feature in the
header through the feature bitmap.

But if we want a proper feature support in the headers, using a
rule of offset/size pairs in sections, we need to know in
advance how many features we need to set in the headers, so that
we can reserve rooms for their section headers.

The current state doesn't allow that, as it forces us to first
save the build-ids to the file right after the datas instead of
planning any structured layout.

That's why this splits up the build-ids processing in two parts:
one that fetches the build-ids from the Dso objects, and one
that saves them into the file.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-3-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Move the build-id storage operations to headers
Frederic Weisbecker [Wed, 11 Nov 2009 03:51:03 +0000]
perf tools: Move the build-id storage operations to headers

So that it makes easier to control it. Especially because we
plan to give it a feature section.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-2-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Synthetize the targeted process
Frederic Weisbecker [Wed, 11 Nov 2009 03:51:02 +0000]
perf tools: Synthetize the targeted process

Don't forget to also synthetize the targeted process from perf
record or we'll miss its dso in the events and then we won't be
able to deal with its build-id.

We are missing it because it is created after the existing
synthetized tasks but before the counters are enabled and can
send its mapping event.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
LKML-Reference: <1257911467-28276-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Fix syntax in documentation
Zeev Tarantov [Mon, 9 Nov 2009 11:26:13 +0000]
perf tools: Fix syntax in documentation

Fix trivial syntax in perf-events user-space tools
documentation.

Signed-off-by: Zeev Tarantov <zeev.tarantov@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <12d7e64c0911081811i7e5b466cu6706ff6ab3e70db4@mail.gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Modify perf routines to use new debugfs routines
Clark Williams [Sun, 8 Nov 2009 15:03:07 +0000]
perf tools: Modify perf routines to use new debugfs routines

modify perf.c get_debugfs_mntpnt() to use the util/debugfs.c
debugfs_find_mountpoint()

modify util/parse-events.c to use debugfs_valid_mountpoint().

Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155720.624cc87e@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Add debugfs utility routines for perf
Clark Williams [Sun, 8 Nov 2009 15:01:37 +0000]
perf tools: Add debugfs utility routines for perf

Add routines to locate the debugfs mount point and to manage the
mounting and unmounting of the debugfs.

Signed-off-by: Clark Williams <williams@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20091101155621.2b3503ee@torg>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf symbols: Use the buildids if present
Arnaldo Carvalho de Melo [Wed, 4 Nov 2009 20:50:43 +0000]
perf symbols: Use the buildids if present

With this change 'perf record' will intercept PERF_RECORD_MMAP
calls, creating a linked list of DSOs, then when the session
finishes, it will traverse this list and read the buildids,
stashing them at the end of the file and will set up a new
feature bit in the header bitmask.

'perf report' will then notice this feature and populate the
'dsos' list and set the build ids.

When reading the symtabs it will refuse to load from a file that
doesn't have the same build id. This improves the
reliability of the profiler output, as symbols and profiling
data is more guaranteed to match.

Example:

 [root@doppio ~]# perf report | head
 /home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols
  # Samples: 2621434559
  #
  # Overhead          Command                  Shared Object  Symbol
  # ........  ...............  .............................  ......
  #
       7.91%             init  [kernel]        [k] read_hpet
       7.64%             init  [kernel]        [k] mwait_idle_with_hints
       7.60%          swapper  [kernel]        [k] read_hpet
       7.60%          swapper  [kernel]        [k] mwait_idle_with_hints
       3.65%             init  [kernel]        [k] 0xffffffffa02339d9
[root@doppio ~]#

In this case the 'perf' binary was an older one, vanished,
so its symbols probably wouldn't match or would cause subtly
different (and misleading) output.

Next patches will support the kernel as well, reading the build
id notes for it and the modules from /sys.

Another patch should also introduce a new plumbing command:

'perf list-buildids'

that will then be used in porcelain that is distro specific to
fetch -debuginfo packages where such buildids are present. This
will in turn allow for one to run 'perf record' in one machine
and 'perf report' in another.

Future work on having the buildid sent directly from the kernel
in the PERF_RECORD_MMAP event is needed to close races, as the
DSO can be changed during a 'perf record' session, but this
patch at least helps with non-corner cases and current/older
kernels.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf symbols: Factor out buildid reading routine
Arnaldo Carvalho de Melo [Tue, 3 Nov 2009 23:46:10 +0000]
perf symbols: Factor out buildid reading routine

So that we can run it without having a DSO instance.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257291970-8208-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoMerge commit 'v2.6.32-rc6' into perf/core
Ingo Molnar [Wed, 4 Nov 2009 10:54:15 +0000]
Merge commit 'v2.6.32-rc6' into perf/core

Conflicts:
tools/perf/Makefile

Merge reason: Resolve the conflict, merge to upstream and merge in
              perf fixes so we can add a dependent patch.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoLinux 2.6.32-rc6
Linus Torvalds [Tue, 3 Nov 2009 19:37:49 +0000]
Linux 2.6.32-rc6

9 years agoMerge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91
Linus Torvalds [Tue, 3 Nov 2009 19:15:25 +0000]
Merge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91

* 'for-linus' of git://github.com/at91linux/linux-2.6-at91:
  at91: at91sam9g45 family: identify several chip versions
  avr32: add two new at91 to cpu.h definition

9 years agoperf symbols: Initialize dso->loaded
Arnaldo Carvalho de Melo [Tue, 3 Nov 2009 17:52:18 +0000]
perf symbols: Initialize dso->loaded

Brown paper bag bug introduced in:

 66bd8424cc05e800db384053bf7ab967e4658468 ("perf tools: Delay
 loading symtabs till we hit a map with it")

Without this we were not loading any symtabs that happened to be
on a DSO for which the allocated memory for ->loaded was !0.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1257270738-5669-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoat91: at91sam9g45 family: identify several chip versions
Nicolas Ferre [Mon, 21 Sep 2009 10:03:56 +0000]
at91: at91sam9g45 family: identify several chip versions

cpu_is_xxx() macros are identifying generic at91sam9g45 chip. This patch adds
the capacity to differentiate Engineering Samples and final lots through the
inclusion of  at91_cpu_fully_identify() and the related chip IDs with chip
version field preserved.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

9 years agoperf: Clean up trivial style issues in builtin-help.c
Thiago Farina [Tue, 3 Nov 2009 13:28:45 +0000]
perf: Clean up trivial style issues in builtin-help.c

Pointed out by checkpatch.

Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: Valdis.Kletnieks@vt.edu
LKML-Reference: <1257254925-5423-1-git-send-email-tfransosi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoavr32: add two new at91 to cpu.h definition
Nicolas Ferre [Mon, 6 Jul 2009 10:15:12 +0000]
avr32: add two new at91 to cpu.h definition

Somme common drivers will need those at91 cpu_is_xxx() definitions. As
at91sam9g10 and at91sam9g45 are on the way to linus' tree, here is the patch
that adds those chips to cpu.h in AVR32 architecture.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

9 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 3 Nov 2009 16:09:57 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits)
  MIPS: O32: Fix ppoll
  MIPS: Oprofile: Rename cpu_type from godson2 to loongson2
  MIPS: Alchemy: Fix hang with high-frequency edge interrupts
  MIPS: TXx9: Fix spi-baseclk value
  MIPS: bcm63xx: Set the correct BCM3302 CPU name
  MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store
  MIPS: Avoid potential hazard on Context register
  MIPS: Octeon: Use lockless interrupt controller operations when possible.
  MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity
  MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache
  MIPS: SMTC: Avoid queing multiple reschedule IPIs
  MIPS: GCMP: Avoid accessing registers when they are not present
  MIPS: GIC: Random fixes and enhancements.
  MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start
  MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands
  MIPS: SPRAM: Clean up support code a little
  MIPS: 1004K: Enable SPRAM support.
  MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4
  MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT.
  MIPS: MTI: Fix accesses to device registers on MIPS boards
  ...

9 years agoMerge branch 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspe...
Linus Torvalds [Tue, 3 Nov 2009 15:52:57 +0000]
Merge branch 'pm-fixes' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PM: Remove some debug messages producing too much noise
  PM: Fix warning on suspend errors
  PM / Hibernate: Add newline to load_image() fail path
  PM / Hibernate: Fix error handling in save_image()
  PM / Hibernate: Fix blkdev refleaks
  PM / yenta: Split resume into early and late parts (rev. 4)

9 years agoCorrect nr_processes() when CPUs have been unplugged
Ian Campbell [Tue, 3 Nov 2009 10:11:14 +0000]
Correct nr_processes() when CPUs have been unplugged

nr_processes() returns the sum of the per cpu counter process_counts for
all online CPUs. This counter is incremented for the current CPU on
fork() and decremented for the current CPU on exit(). Since a process
does not necessarily fork and exit on the same CPU the process_count for
an individual CPU can be either positive or negative and effectively has
no meaning in isolation.

Therefore calculating the sum of process_counts over only the online
CPUs omits the processes which were started or stopped on any CPU which
has since been unplugged. Only the sum of process_counts across all
possible CPUs has meaning.

The only caller of nr_processes() is proc_root_getattr() which
calculates the number of links to /proc as
        stat->nlink = proc_root.nlink + nr_processes();

You don't have to be all that unlucky for the nr_processes() to return a
negative value leading to a negative number of links (or rather, an
apparently enormous number of links). If this happens then you can get
failures where things like "ls /proc" start to fail because they got an
-EOVERFLOW from some stat() call.

Example with some debugging inserted to show what goes on:
        # ps haux|wc -l
        nr_processes: CPU0:     90
        nr_processes: CPU1:     1030
        nr_processes: CPU2:     -900
        nr_processes: CPU3:     -136
        nr_processes: TOTAL:    84
        proc_root_getattr. nlink 12 + nr_processes() 84 = 96
        84
        # echo 0 >/sys/devices/system/cpu/cpu1/online
        # ps haux|wc -l
        nr_processes: CPU0:     85
        nr_processes: CPU2:     -901
        nr_processes: CPU3:     -137
        nr_processes: TOTAL:    -953
        proc_root_getattr. nlink 12 + nr_processes() -953 = -941
        75
        # stat /proc/
        nr_processes: CPU0:     84
        nr_processes: CPU2:     -901
        nr_processes: CPU3:     -137
        nr_processes: TOTAL:    -954
        proc_root_getattr. nlink 12 + nr_processes() -954 = -942
          File: `/proc/'
          Size: 0               Blocks: 0          IO Block: 1024   directory
        Device: 3h/3d   Inode: 1           Links: 4294966354
        Access: (0555/dr-xr-xr-x)  Uid: (    0/    root)   Gid: (    0/    root)
        Access: 2009-11-03 09:06:55.000000000 +0000
        Modify: 2009-11-03 09:06:55.000000000 +0000
        Change: 2009-11-03 09:06:55.000000000 +0000

I'm not 100% convinced that the per_cpu regions remain valid for offline
CPUs, although my testing suggests that they do. If not then I think the
correct solution would be to aggregate the process_count for a given CPU
into a global base value in cpu_down().

This bug appears to pre-date the transition to git and it looks like it
may even have been present in linux-2.6.0-test7-bk3 since it looks like
the code Rusty patched in http://lwn.net/Articles/64773/ was already
wrong.

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Tue, 3 Nov 2009 15:46:17 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: gpio-keys - use IRQF_SHARED
  Input: winbond-cir - select LEDS_TRIGGERS
  Input: i8042 - try to get stable CTR value when initializing
  Input: atkbd - add a quirk for OQO 01+ multimedia keys

9 years agoMerge branch 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Tue, 3 Nov 2009 15:46:05 +0000]
Merge branch 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux

* 'fixes-s3c-2632-rc5' of git://git.fluff.org/bjdooks/linux:
  ARM: S3C2410: Fix sparse warnings in arch/arm/mach-s3c2410/gpio.c
  ARM: S3C2440: mini2440: Fix spare warnings
  ARM: S3C24XX: Fix warnings in arch/arm/plat-s3c24xx/gpio.c
  ARM: S3C2440: mini2440: Fix missing CONFIG_S3C_DEV_USB_HOST
  ARM: S3C24XX: arch/arm/plat-s3c24xx: Move dereference after NULL test
  ARM: S3C: Fix adc function exports
  ARM: S3C2410: Fix link if CONFIG_S3C2410_IOTIMING is not set
  ARM: S3C24XX: Introduce S3C2442B CPU
  ARM: S3C24XX: Define a macro to avoid compilation error
  ARM: S3C: Add info for supporting circular DMA buffers
  ARM: S3C64XX: Set rate of crystal mux
  ARM: S3C64XX: Fix S3C64XX_CLKDIV0_ARM_MASK value

9 years agoMerge branch 'i2c-fixes' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Tue, 3 Nov 2009 15:45:50 +0000]
Merge branch 'i2c-fixes' of git://git.fluff.org/bjdooks/linux

* 'i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-mpc: Do not generate STOP after read.
  i2c: imx: disable clock when it's possible to save power.
  i2c: imx: only imx1 needs disable delay
  i2c: imx: check busy bit when START/STOP

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Tue, 3 Nov 2009 15:45:22 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: add zero-fill for new btree node buffers
  nilfs2: fix irregular checkpoint creation due to data flush
  nilfs2: fix dirty page accounting leak causing hang at write

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 3 Nov 2009 15:44:01 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  mac80211: check interface is down before type change
  cfg80211: fix NULL ptr deref
  libertas if_usb: Fix crash on 64-bit machines
  mac80211: fix reason code output endianness
  mac80211: fix addba timer
  ath9k: fix misplaced semicolon on rate control
  b43: Fix DMA TX bounce buffer copying
  mac80211: fix BSS leak
  rt73usb.c : more ids
  ipw2200: fix oops on missing firmware
  gre: Fix dev_addr clobbering for gretap
  sky2: set carrier off in probe
  net: fix sk_forward_alloc corruption
  pcnet_cs: add cis of PreMax PE-200 ethernet pcmcia card
  r8169: Fix card drop incoming VLAN tagged MTU byte large jumbo frames
  ibmtr: possible Read buffer overflow?
  net: Fix RPF to work with policy routing
  net: fix kmemcheck annotations
  e1000e: rework disable K1 at 1000Mbps for 82577/82578
  e1000e: config PHY via software after resets
  ...

9 years agoPM: Remove some debug messages producing too much noise
Pavel Machek [Wed, 28 Oct 2009 21:56:10 +0000]
PM: Remove some debug messages producing too much noise

pm_runtime_idle() is somewhat noisy. Remove debug prints.

Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

9 years agoPM: Fix warning on suspend errors
Romit Dasgupta [Wed, 28 Oct 2009 21:56:02 +0000]
PM: Fix warning on suspend errors

Fixes the point where we need to complete the power transition when
device suspend fails, so that we don't print warnings about devices
added to the device hierarchy after a failing suspend.

[rjw: Modified changelog.]

Signed-off-by: Romit Dasgupta <romit@ti.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

9 years agoPM / Hibernate: Add newline to load_image() fail path
Jiri Slaby [Wed, 28 Oct 2009 21:55:42 +0000]
PM / Hibernate: Add newline to load_image() fail path

Finish a line by \n when load_image fails in the middle of loading.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

9 years agoPM / Hibernate: Fix error handling in save_image()
Jiri Slaby [Wed, 28 Oct 2009 21:55:33 +0000]
PM / Hibernate: Fix error handling in save_image()

There are too many retval variables in save_image(). Thus error return
value from snapshot_read_next() may be ignored and only part of the
snapshot (successfully) written.

Remove 'error' variable, invert the condition in the do-while loop
and convert the loop to use only 'ret' variable.

Switch the rest of the function to consider only 'ret'.

Also make sure we end printed line by \n if an error occurs.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

9 years agoPM / Hibernate: Fix blkdev refleaks
Jiri Slaby [Wed, 7 Oct 2009 20:37:35 +0000]
PM / Hibernate: Fix blkdev refleaks

While cruising through the swsusp code I found few blkdev reference
leaks of resume_bdev.

swsusp_read: remove blkdev_put altogether. Some fail paths do
             not do that.
swsusp_check: make sure we always put a reference on fail paths
software_resume: all fail paths between swsusp_check and swsusp_read
                 omit swsusp_close. Add it in those cases. And since
                 swsusp_read doesn't drop the reference anymore, do
                 it here unconditionally.

[rjw: Fixed a small coding style issue.]

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

9 years agoPM / yenta: Split resume into early and late parts (rev. 4)
Rafael J. Wysocki [Tue, 3 Nov 2009 09:54:58 +0000]
PM / yenta: Split resume into early and late parts (rev. 4)

Commit 0c570cdeb8fdfcb354a3e9cd81bfc6a09c19de0c
(PM / yenta: Fix cardbus suspend/resume regression) caused resume to
fail on systems with two CardBus bridges.  While the exact nature
of the failure is not known at the moment, it can be worked around by
splitting the yenta resume into an early part, executed during the
early phase of resume, that will only resume the socket and power it
up if there was a card in it during suspend, and a late part,
executed during "regular" resume, that will carry out all of the
remaining yenta resume operations.

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=14334, which is a
listed regression from 2.6.31.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reported-by: Stephen J. Gowdy <gowdy@cern.ch>
Tested-by: Jose Marino <braket@hotmail.com>

9 years agoInput: gpio-keys - use IRQF_SHARED
Dmitry Eremin-Solenikov [Tue, 3 Nov 2009 06:04:18 +0000]
Input: gpio-keys - use IRQF_SHARED

There is nothing that disallows gpio-keys to share it's IRQ line
w/ other drivers. Make it use IRQF_SHARED in request_irq().

An example of other driver with which I'd like to share IRQ line
for GPIO buttons is ledtrig-gpio.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoInput: winbond-cir - select LEDS_TRIGGERS
David Härdeman [Tue, 3 Nov 2009 05:57:41 +0000]
Input: winbond-cir - select LEDS_TRIGGERS

drivers/input/misc/winbond-cir.c depends on LEDS_TRIGGERS so
add an appropriate select to drivers/input/misc/Kconfig

Signed-off-by: David Härdeman <david@hardeman.nu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoInput: i8042 - try to get stable CTR value when initializing
Dmitry Torokhov [Tue, 3 Nov 2009 05:57:40 +0000]
Input: i8042 - try to get stable CTR value when initializing

If user presses keys while i8042 is being initialized there is a chance
that keyboard data will be mistaken for results of Read Control Register
command causing futher troubles. Work around this issue by reading CTR
several times and stop when we get matching results.

Reported-and-tested-by: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoMerge commit 'v2.6.32-rc5' into for-linus
Dmitry Torokhov [Tue, 3 Nov 2009 06:10:07 +0000]
Merge commit 'v2.6.32-rc5' into for-linus

9 years agonilfs2: add zero-fill for new btree node buffers
Ryusuke Konishi [Sun, 13 Sep 2009 16:20:35 +0000]
nilfs2: add zero-fill for new btree node buffers

Adds missing initialization of newly allocated b-tree node buffers.
This avoids garbage data to be mixed in b-tree node blocks.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

9 years agonilfs2: fix irregular checkpoint creation due to data flush
Ryusuke Konishi [Mon, 2 Nov 2009 06:08:13 +0000]
nilfs2: fix irregular checkpoint creation due to data flush

When nilfs flushes out dirty data to reduce memory pressure, creation
of checkpoints is wrongly postponed.  This bug causes irregular
checkpoint creation especially in small footprint systems.

To correct this issue, a timer for the checkpoint creation has to be
continued if a log writer does not create a checkpoint.

This will do the correction.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

9 years agonilfs2: fix dirty page accounting leak causing hang at write
Ryusuke Konishi [Mon, 2 Nov 2009 15:25:53 +0000]
nilfs2: fix dirty page accounting leak causing hang at write

Bruno Prémont and Dunphy, Bill noticed me that NILFS will certainly
hang on ARM-based targets.

I found this was caused by an underflow of dirty pages counter.  A
b-tree cache routine was marking page dirty without adjusting page
account information.

This fixes the dirty page accounting leak and resolves the hang on
arm-based targets.

Reported-by: Bruno Prémont <bonbons@linux-vserver.org>
Reported-by: Dunphy, Bill <WDunphy@tandbergdata.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: stable <stable@kernel.org>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Tue, 3 Nov 2009 03:18:50 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

9 years agoi2c-mpc: Do not generate STOP after read.
Joakim Tjernlund [Tue, 13 Oct 2009 08:12:03 +0000]
i2c-mpc: Do not generate STOP after read.

The driver always ends a read with a STOP condition which
breaks subsequent I2C reads/writes in the same transaction as
these expect to do a repeated START(ReSTART).

This will also help I2C multimaster as the bus will not be released
after the first read, but when the whole transaction ends.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c: imx: disable clock when it's possible to save power.
Richard Zhao [Sat, 17 Oct 2009 09:46:24 +0000]
i2c: imx: disable clock when it's possible to save power.

Enable clock before START, disable it after STOP.

Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c: imx: only imx1 needs disable delay
Richard Zhao [Sat, 17 Oct 2009 09:46:23 +0000]
i2c: imx: only imx1 needs disable delay

check cpu_is_mx1() when disable delay.

Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoi2c: imx: check busy bit when START/STOP
Richard Zhao [Sat, 17 Oct 2009 09:46:22 +0000]
i2c: imx: check busy bit when START/STOP

The controller can't do anything else before it actually generates START/STOP.
So we check busy bit to make sure START/STOP is successfully finished.

If we don't check busy bit, START/STOP may fail on some fast CPUs.

Signed-off-by: Richard Zhao <linuxzsc@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh...
Linus Torvalds [Mon, 2 Nov 2009 20:23:21 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: fix readdir corner cases
  9p: fix readlink
  9p: fix a small bug in readdir for long directories

9 years agomac80211: check interface is down before type change
Johannes Berg [Sun, 1 Nov 2009 18:25:40 +0000]
mac80211: check interface is down before type change

For some strange reason the netif_running() check
ended up after the actual type change instead of
before, potentially causing all kinds of problems
if the interface is up while changing the type;
one of the problems manifests itself as a warning:

WARNING: at net/mac80211/iface.c:651 ieee80211_teardown_sdata+0xda/0x1a0 [mac80211]()
Hardware name: Aspire one
Pid: 2596, comm: wpa_supplicant Tainted: G        W  2.6.31-10-generic #32-Ubuntu
Call Trace:
 [] warn_slowpath_common+0x6d/0xa0
 [] warn_slowpath_null+0x15/0x20
 [] ieee80211_teardown_sdata+0xda/0x1a0 [mac80211]
 [] ieee80211_if_change_type+0x4a/0xc0 [mac80211]
 [] ieee80211_change_iface+0x61/0xa0 [mac80211]
 [] cfg80211_wext_siwmode+0xc7/0x120 [cfg80211]
 [] ioctl_standard_call+0x58/0xf0

(http://www.kerneloops.org/searchweek.php?search=ieee80211_teardown_sdata)

Cc: Arjan van de Ven <arjan@infradead.org>
Cc: stable@kernel.org
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agocfg80211: fix NULL ptr deref
Johannes Berg [Sat, 31 Oct 2009 06:40:37 +0000]
cfg80211: fix NULL ptr deref

commit 211a4d12abf86fe0df4cd68fc6327cbb58f56f81
  Author: Johannes Berg <johannes@sipsolutions.net>
  Date:   Tue Oct 20 15:08:53 2009 +0900

      cfg80211: sme: deauthenticate on assoc failure

introduced a potential NULL pointer dereference that
some people have been hitting for some reason -- the
params.bssid pointer is not guaranteed to be non-NULL
for what seems to be a race between various ways of
reaching the same thing.

While I'm trying to analyse the problem more let's
first fix the crash. I think the real fix may be to
avoid doing _anything_ if it ended up being NULL, but
right now I'm not sure yet.

I think
http://bugzilla.kernel.org/show_bug.cgi?id=14342
might also be this issue.

Reported-by: Parag Warudkar <parag.lkml@gmail.com>
Tested-by: Parag Warudkar <parag.lkml@gmail.com>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

9 years agoperf tools: Fix missing symtabs printouts
Ingo Molnar [Mon, 2 Nov 2009 18:25:25 +0000]
perf tools: Fix missing symtabs printouts

Fix:

  util/map.c: In function ‘map__find_symbol’:
  util/map.c:97: error: field precision should have type ‘int’, but argument 3 has type ‘size_t’

Also clean up some line wrap damage - we dont line-wrap printk
messages.

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Mon, 2 Nov 2009 18:22:25 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  Revert "[IA64] fix percpu warnings"
  [IA64] fix percpu warnings
  [IA64] SMT friendly version of spin_unlock_wait()
  [IA64] use printk_once() unaligned.c/io_common.c
  [IA64] Require SAL 3.2 in order to do extended config space ops
  [IA64] unsigned cannot be less than 0 in sn_hwperf_ioctl()
  [IA64] Restore registers in the stack on INIT
  [IA64] Re-implement spinaphores using ticket lock concepts
  [IA64] Squeeze ticket locks back into 4 bytes.

9 years agoRevert "ext4: Remove journal_checksum mount option and enable it by default"
Linus Torvalds [Mon, 2 Nov 2009 18:15:27 +0000]
Revert "ext4: Remove journal_checksum mount option and enable it by default"

This reverts commit d0646f7b636d067d715fab52a2ba9c6f0f46b0d7, as
requested by Eric Sandeen.

It can basically cause an ext4 filesystem to miss recovery (and thus get
mounted with errors) if the journal checksum does not match.

Quoth Eric:

   "My hand-wavy hunch about what is happening is that we're finding a
    bad checksum on the last partially-written transaction, which is
    not surprising, but if we have a wrapped log and we're doing the
    initial scan for head/tail, and we abort scanning on that bad
    checksum, then we are essentially running an unrecovered filesystem.

    But that's hand-wavy and I need to go look at the code.

    We lived without journal checksums on by default until now, and at
    this point they're doing more harm than good, so we should revert
    the default-changing commit until we can fix it and do some good
    power-fail testing with the fixes in place."

See

http://bugzilla.kernel.org/show_bug.cgi?id=14354

for all the gory details.

Requested-by: Eric Sandeen <sandeen@redhat.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Alexey Fisher <bug-track@fisher-privat.net>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Cc: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 2 Nov 2009 17:53:19 +0000]
Merge branch 'for-linus' of /home/rmk/linux-2.6-arm

* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: ensure initial page tables are setup for SMP systems
  ARM: 5776/1: Check compiler version and EABI support when adding ARM unwind support.
  ARM: 5774/1: Fix Realview ARM1176PB board reboot
  ARM: Fix errata 411920 workarounds
  ARM: Fix sparsemem with SPARSEMEM_EXTREME enabled
  ARM: Use GFP_DMA only for masks _less_ than 32-bit
  ARM: integrator: allow Integrator to be built with highmem
  ARM: Fix signal restart issues with NX and OABI compat

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Mon, 2 Nov 2009 17:50:22 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Don't check invalid HP pin
  ALSA: dummy - Fix descriptions of pcm_substreams parameter
  ALSA: pcmcia: use dynamic debug infrastructure, deprecate CS_CHECK (sound)
  ALSA: hda: Use quirk mask for Dell Inspiron Mini9/Vostro A90 using ALC268
  sound: via82xx: deactivate DXS controls of inactive streams
  ALSA: snd-usb-caiaq: Bump version number to 1.3.20
  ALSA: snd-usb-caiaq: Lock on stream start/unpause
  ALSA: snd-usb-caiaq: Missing lock around use of buffer positions
  ALSA: sound/parisc: Move dereference after NULL test
  ALSA: sound: Move dereference after NULL test and drop unnecessary NULL tests
  ALSA: hda_intel: Add the Linux device ID for NVIDIA HDA controller
  ALSA: pcsp - Fix nforce workaround
  ALSA: SND_CS5535AUDIO: Remove the X86 platform dependency
  ASoC: Amstrad Delta: add info about the line discipline requirement to Kconfig help text
  ASoC: Fix possible codec_dai->ops NULL pointer problems
  ALSA: hda - Fix capture source checks for ALC662/663 codecs
  ASoC: Serialize access to dapm_power_widgets()

9 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 2 Nov 2009 17:46:33 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  futex: Fix spurious wakeup for requeue_pi really

9 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 2 Nov 2009 17:46:06 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Remove -Wcast-align
  perf tools: Fix compatibility with libelf 0.8 and autodetect
  perf events: Don't generate events for the idle task when exclude_idle is set
  perf events: Fix swevent hrtimer sampling by keeping track of remaining time when enabling/disabling swevent hrtimers

9 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 2 Nov 2009 17:45:44 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Remove cpu arg from the rb_time_stamp() function
  tracing: Fix comment typo and documentation example
  tracing: Fix trace_seq_printf() return value
  tracing: Update *ppos instead of filp->f_pos

9 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 2 Nov 2009 17:45:17 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Make EFI RTC function depend on 32bit again
  x86-64: Fix register leak in 32-bit syscall audting
  x86: crash_dump: Fix non-pae kdump kernel memory accesses
  x86: Side-step lguest problem by only building cmpxchg8b_emu for pre-Pentium
  x86: Remove STACKPROTECTOR_ALL

9 years agomm: remove incorrect swap_count() from try_to_unuse()
Bo Liu [Mon, 2 Nov 2009 16:50:33 +0000]
mm: remove incorrect swap_count() from try_to_unuse()

In try_to_unuse(), swcount is a local copy of *swap_map, including the
SWAP_HAS_CACHE bit; but a wrong comparison against swap_count(*swap_map),
which masks off the SWAP_HAS_CACHE bit, succeeded where it should fail.

That had the effect of resetting the mm from which to start searching
for the next swap page, to an irrelevant mm instead of to an mm in which
this swap page had been found: which may increase search time by ~20%.
But we're used to swapoff being slow, so never noticed the slowdown.

Remove that one spurious use of swap_count(): Bo Liu thought it merely
redundant, Hugh rewrote the description since it was measurably wrong.

Signed-off-by: Bo Liu <bo-liu@hotmail.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoi915: fix intel graphics suspend breakage due to resume/lid event confusion
Linus Torvalds [Mon, 2 Nov 2009 17:29:55 +0000]
i915: fix intel graphics suspend breakage due to resume/lid event confusion

In commit c1c7af60892070e4b82ad63bbfb95ae745056de0 ("drm/i915: force
mode set at lid open time") the intel graphics driver was taught to
restore the LVDS mode on lid open.

That caused problems with interaction with the suspend/resume code,
which commonly runs at the same time (suspend is often caused by the lid
close event, while lid open is commonly a resume event), which was
worked around with in commit 06891e27a9b5dba5268bb80e41a283f51335afe7
("drm/i915: fix suspend/resume breakage in lid notifier").

However, in the meantime the lid event code had also grown a user event
notifier (commit 06324194eee97a51b5f172270df49ec39192d6cc: "drm/i915:
generate a KMS uevent at lid open/close time"), and now _that_ causes
problems with suspend/resume and some versions of Xorg reacting to those
uevents by setting the mode.

So this effectively reverts that commit 06324194ee, and makes the lid
open protection logic against suspend/resume more explicit.  This fixes
at least one laptop. See

http://bugzilla.kernel.org/show_bug.cgi?id=14484

for more details.

Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Riccardo Magliocchetti <riccardo.magliocchetti@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoRevert "[IA64] fix percpu warnings"
Tony Luck [Mon, 2 Nov 2009 17:23:08 +0000]
Revert "[IA64] fix percpu warnings"

This reverts commit b94b08081fcecf83fa690d6c5664f6316fe72208.

genksyms currently cannot handle complicated types for exported
percpu variables.  Drop this patch for now as it prevents a
module from being loaded on sn2 systems:

 xpc: no symbol version for per_cpu____sn_cnodeid_to_nasid
 xpc: Unknown symbol per_cpu____sn_cnodeid_to_nasid

Signed-off-by: Tony Luck <tony.luck@intel.com>

9 years agoARM: ensure initial page tables are setup for SMP systems
Russell King [Sun, 1 Nov 2009 17:44:24 +0000]
ARM: ensure initial page tables are setup for SMP systems

Mapping the same memory using two different attributes (memory
type, shareability, cacheability) is unpredictable.  During boot,
we encounter a situation when we're updating the kernel's page
tables which can lead to dirty cache lines existing in the cache
which are subsequently missed.  This causes stack corruption,
and therefore a crash.

Therefore, ensure that the shared and cacheability settings
matches the configuration that will be used later; this together
with the restriction in early_cachepolicy() ensures that we won't
create a mismatch during boot.

Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 5776/1: Check compiler version and EABI support when adding ARM unwind support.
Claudio Scordino [Fri, 30 Oct 2009 11:06:05 +0000]
ARM: 5776/1: Check compiler version and EABI support when adding ARM unwind support.

ARM unwind is known to compile only with EABI and not-buggy compilers.
The problem is not the unwinding information but the -fno-frame-pointer
option added as a result of !CONFIG_FRAME_POINTER.  Now we check the
compiler and raise a #warning in case of wrong compiler.

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoperf tools: Improve message about missing symtabs for deleted DSOs
Arnaldo Carvalho de Melo [Fri, 30 Oct 2009 18:28:25 +0000]
perf tools: Improve message about missing symtabs for deleted DSOs

Instead of:

  no symbols found in /usr/lib/gstreamer-0.10/libgsttypefindfunctions.so (deleted), maybe install a debug package?
  no symbols found in /usr/lib/gstreamer-0.10/libgstaudioconvert.so (deleted), maybe install a debug package?

We now emit:

  /usr/lib/gstreamer-0.10/libgsttypefindfunctions.so was updated, restart the long running apps that use it!
  /usr/lib/gstreamer-0.10/libgstaudioconvert.so was updated, restart the long running apps that use it!

Which is far less misleading about what the cause of the
symbol mismatch is.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-3-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Simplify the symbol priv area mechanism
Arnaldo Carvalho de Melo [Fri, 30 Oct 2009 18:28:24 +0000]
perf tools: Simplify the symbol priv area mechanism

Before we were storing this in the DSO, but in fact this is a
property of the 'symbol' class, not something that will vary
among DSOs, so move it to a global variable and initialize it
using the existing symbol__init routine.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoperf tools: Factor out the map initialization
Arnaldo Carvalho de Melo [Fri, 30 Oct 2009 18:28:23 +0000]
perf tools: Factor out the map initialization

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Mike Galbraith <efault@gmx.de>
LKML-Reference: <1256927305-4628-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Mon, 2 Nov 2009 15:18:33 +0000]
Merge branch 'fix/hda' into for-linus

9 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Mon, 2 Nov 2009 15:18:29 +0000]
Merge branch 'fix/asoc' into for-linus

9 years ago9p: fix readdir corner cases
Eric Van Hensbergen [Mon, 2 Nov 2009 14:39:28 +0000]
9p: fix readdir corner cases

The patch below also addresses a couple of other corner cases in readdir
seen with a large (e.g. 64k) msize.  I'm not sure what people think of
my co-opting of fid->aux here.  I'd be happy to rework if there's a better
way.

When the size of the user supplied buffer passed to readdir is smaller
than the data returned in one go by the 9P read request, v9fs_dir_readdir()
currently discards extra data so that, on the next call, a 9P read
request will be issued with offset < previous offset + bytes returned,
which voilates the constraint described in paragraph 3 of read(5) description.
This patch preseves the leftover data in fid->aux for use in the next call.

Signed-off-by: Jim Garlick <garlick@llnl.gov>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9 years ago9p: fix readlink
Martin Stava [Mon, 2 Nov 2009 14:39:34 +0000]
9p: fix readlink

I do not know if you've looked on the patch, but unfortunately it is
incorrect. A suggested better version is in this email (the old
version didn't work in case the user provided buffer was not long
enough - it incorrectly appended null byte on a position of last char,
and thus broke the contract of the readlink method). However, I'm
still not sure this is 100% correct thing to do, I think readlink is
supposed to return buffer without last null byte in all cases, but we
do return last null byte (even the old version).. on the other hand it
is likely unspecified what is in the remaining part of the buffer, so
null character may be fine there ;):

Signed-off-by: Martin Stava <martin.stava@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9 years ago9p: fix a small bug in readdir for long directories
Martin Stava [Mon, 2 Nov 2009 14:39:35 +0000]
9p: fix a small bug in readdir for long directories

Here is a proposed patch for bug in readdir. Listing of dirs with
many files fails without this patch.

Signed-off-by: Martin Stava <martin.stava@gmail.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9 years agoALSA: hda - Don't check invalid HP pin
Takashi Iwai [Mon, 2 Nov 2009 13:23:15 +0000]
ALSA: hda - Don't check invalid HP pin

alc_automute_pin() might be called even if any HP pin is defined, and
it will result in verbs with NID=0.

This patch adds a check for the validity of HP widget before issuing
any verbs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: dummy - Fix descriptions of pcm_substreams parameter
Takashi Iwai [Mon, 2 Nov 2009 13:10:59 +0000]
ALSA: dummy - Fix descriptions of pcm_substreams parameter

Now up to 128 substreams are supported.

Reported-by: Adrian Bridgett <adrian@smop.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoMIPS: O32: Fix ppoll
Arnaud Patard [Tue, 20 Oct 2009 08:27:47 +0000]
MIPS: O32: Fix ppoll

sys_ppoll syscall needs to use a compat handler on 64bit kernels with o32
user-space.

Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Oprofile: Rename cpu_type from godson2 to loongson2
Wu Zhangjin [Wed, 21 Oct 2009 14:51:46 +0000]
MIPS: Oprofile: Rename cpu_type from godson2 to loongson2

Unify the naming method between kernel and the user-space oprofile tool.
Because loongson is used instead of godson in most of the places, we agreed
to use loongson instead, which will simplify future maintenance.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Alchemy: Fix hang with high-frequency edge interrupts
Manuel Lauss [Wed, 14 Oct 2009 10:22:20 +0000]
MIPS: Alchemy: Fix hang with high-frequency edge interrupts

The handle_edge_irq() flowhandler disables edge int sources which occur
too fast (i.e. another edge comes in before the irq handler function
had a chance to finish).  Currently, the mask_ack() callback does not
ack the edges in hardware, leading to an endless loop in the flowhandler
where it tries to shut up the irq source.

When I rewrote the alchemy IRQ code  I wrongly assumed the mask_ack()
callback was only used by the level flowhandler, hence it omitted the
(at the time pointless) edge acks.  Turned out I was wrong; so here
is a complete mask_ack implementation for Alchemy IC, which fixes
the above mentioned problem.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: TXx9: Fix spi-baseclk value
Atsushi Nemoto [Thu, 3 Sep 2009 13:59:00 +0000]
MIPS: TXx9: Fix spi-baseclk value

TXx9 SPI bit rate is calculated by:
fBR = fSPI / 2 / (n + 1)
(fSPI is SPI master clock freq, i.e. imbusclk freq.)
So use imbus_clk / 2 as a spi-baseclk.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: bcm63xx: Set the correct BCM3302 CPU name
Florian Fainelli [Wed, 14 Oct 2009 07:56:00 +0000]
MIPS: bcm63xx: Set the correct BCM3302 CPU name

For consistency with other BCM63xx SoC set the CPU name to "Broadcom
BCM6338" when actually running on that system.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store
Zhang Le [Fri, 19 Jun 2009 10:01:39 +0000]
MIPS: Loongson 2: Set cpu_has_dc_aliases and cpu_icache_snoops_remote_store

Loongson 2 does not have dcache aliases when is using 16k pages. and the

And because Loongson 2 doesn't do SMP , cpu_icache_snoops_remote_store does
not matter here.

Signed-off-by: Zhang Le <r0bertz@gentoo.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Avoid potential hazard on Context register
Ralf Baechle [Tue, 13 Oct 2009 21:23:28 +0000]
MIPS: Avoid potential hazard on Context register

set_saved_sp reads Context register. Avoid reading stale value from
earlier incomplete write.

Issue found and fixed for head.S by Chris Dearman <chris@mips.com>.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Octeon: Use lockless interrupt controller operations when possible.
David Daney [Tue, 13 Oct 2009 18:26:03 +0000]
MIPS: Octeon: Use lockless interrupt controller operations when possible.

Some newer Octeon chips have registers that allow lockless operation of
the interrupt controller.  Take advantage of them.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity
David Daney [Tue, 13 Oct 2009 15:52:28 +0000]
MIPS: Octeon: Use write_{un,}lock_irq{restore,save} to set irq affinity

Since the locks are used from interrupt context we need the
irqsave/irqrestore versions of the locking functions.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Set S-cache linesize to 64-bytes for MTI's S-cache
Ralf Baechle [Tue, 13 Oct 2009 14:54:01 +0000]
MIPS: Set S-cache linesize to 64-bytes for MTI's S-cache

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: SMTC: Avoid queing multiple reschedule IPIs
Jaidev Patwardhan [Fri, 10 Jul 2009 09:06:00 +0000]
MIPS: SMTC: Avoid queing multiple reschedule IPIs

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: GCMP: Avoid accessing registers when they are not present
Jaidev Patwardhan [Fri, 10 Jul 2009 08:54:25 +0000]
MIPS: GCMP: Avoid accessing registers when they are not present

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: GIC: Random fixes and enhancements.
Chris Dearman [Fri, 10 Jul 2009 08:54:09 +0000]
MIPS: GIC: Random fixes and enhancements.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start
Chris Dearman [Fri, 10 Jul 2009 09:06:38 +0000]
MIPS: CMP: Fix memory barriers for correct operation of amon_cpu_start

Signed-off-by: Chris Dearman (chris@mips.com)
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands
Nigel Stephens [Mon, 12 Oct 2009 21:57:18 +0000]
MIPS: Fix abs.[sd] and neg.[sd] emulation for NaN operands

This patch ensures that the sign bit is always updated for NaN operands.

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: SPRAM: Clean up support code a little
Chris Dearman [Fri, 10 Jul 2009 08:51:27 +0000]
MIPS: SPRAM: Clean up support code a little

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: 1004K: Enable SPRAM support.
Ralf Baechle [Mon, 12 Oct 2009 21:20:20 +0000]
MIPS: 1004K: Enable SPRAM support.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Malta: Enable PCI 2.1 compatibility in PIIX4
Ralf Baechle [Mon, 12 Oct 2009 20:54:47 +0000]
MIPS: Malta: Enable PCI 2.1 compatibility in PIIX4

Based on original patch by Chris Dearman <chris@mips.com>.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT.
Ralf Baechle [Mon, 12 Oct 2009 20:30:06 +0000]
MIPS: Kconfig: Fix duplicate default value for MIPS_L1_CACHE_SHIFT.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: MTI: Fix accesses to device registers on MIPS boards
Chris Dearman [Fri, 10 Jul 2009 08:53:54 +0000]
MIPS: MTI: Fix accesses to device registers on MIPS boards

This fixes the remaining problems introduced by
f197465384bf7ef1af184c2ed1a4e268911a91e3 (incorrect access length &
byteswapping in bigendian mode)

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Fix machine check exception in kmap_coherent()
Kevin Cernekee [Mon, 7 Sep 2009 18:11:31 +0000]
MIPS: Fix machine check exception in kmap_coherent()

On an SMP system with cache aliases, the following sequence of events may
happen:

1) copy_user_highpage() runs on CPU0, invoking kmap_coherent() to create a
   temporary mapping in the fixmap region
2) copy_page() starts on CPU0
3) CPU1 sends CPU0 an IPI asking CPU0 to run local_r4k_flush_cache_page()
4) CPU0 takes the interrupt, interrupting copy_page()
5) local_r4k_flush_cache_page() on CPU0 calls kmap_coherent() again
6) The second invocation of kmap_coherent() on CPU0 tries to use the
   same fixmap virtual address that was being used by copy_user_highpage()
7) CPU0 throws a machine check exception for the TLB address conflict

Fixed by creating an extra set of fixmap entries for use in interrupt
handlers.  This prevents fixmap VA conflicts between copy_user_highpage()
running in user context, and local_r4k_flush_cache_page() invoked from an
SMP IPI.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: MTX-1: Fix build if CONFIG_PCI is disabled.
Ralf Baechle [Mon, 12 Oct 2009 00:23:48 +0000]
MIPS: MTX-1: Fix build if CONFIG_PCI is disabled.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: AR7: register watchdog device only if enabled in hw configuration
Florian Fainelli [Tue, 4 Aug 2009 21:09:36 +0000]
MIPS: AR7: register watchdog device only if enabled in hw configuration

This patch checks if the watchdog enable bit is set in the DCL register
meaning that the hardware watchdog actually works and if so, register the
ar7_wdt platform_device.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Prepare for watchdog support
Florian Fainelli [Mon, 10 Aug 2009 19:42:59 +0000]
MIPS: BCM63xx: Prepare for watchdog support

This patch prepares the board code to register a bcm63xx_wdt
platform_device that we are going to use in a subsequent patch.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Make bcm63xx_uart_register an initfunc
Florian Fainelli [Mon, 10 Aug 2009 19:42:54 +0000]
MIPS: BCM63xx: Make bcm63xx_uart_register an initfunc

This patch removes the calls to bcm63xx_uart_register in board_bcm963xx.c
and make bcm63xx_uart_register an initfunc.  Allows us to remove
bcm63xx_dev_uart.h which was there to make checkpatch.pl happy.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: AU1000: Fix build failure for db1x00 configured for Au1100 SoC
Florian Fainelli [Sun, 16 Aug 2009 22:28:24 +0000]
MIPS: AU1000: Fix build failure for db1x00 configured for Au1100 SoC

This patch fixes the following warning, which becomes an error due to
-Werror to be turned on:
CC arch/mips/alchemy/common/gpiolib-au1000.o
cc1: warnings being treated as errors
arch/mips/alchemy/common/gpiolib-au1000.c: In function 'au1100_gpio2_to_irq':
/home/florian/dev/kernel/linux-queue/arch/mips/include/asm/mach-au1x00/gpio-au1000.h:107: warning: control reaches end of non-void function

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Fix soft-reset lockup on BCM6345
Florian Fainelli [Mon, 31 Aug 2009 18:27:39 +0000]
MIPS: BCM63xx: Fix soft-reset lockup on BCM6345

This patch fixes a lockup on BCM6345 where setting the PLL soft reset bit
will also lock the other blocks including UART.  Instead of setting only
the PLL soft reset bit in the software reset register, set this bit but do
not touch the others.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>