9 years agodrm/radeon: use ALIGN instead of open coding it
Matt Turner [Thu, 25 Feb 2010 04:23:31 +0000]
drm/radeon: use ALIGN instead of open coding it

Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Corbin Simpson <MostAwesomeDude@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: initialize set_surface_reg reg for rs600 asic
Jerome Glisse [Fri, 26 Feb 2010 19:14:12 +0000]
drm/radeon/kms: initialize set_surface_reg reg for rs600 asic

rs600 asic was missing set_surface_reg callback leading to
oops.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: update new pll algo
Alex Deucher [Tue, 23 Feb 2010 08:24:38 +0000]
drm/radeon/kms: update new pll algo

- add support for pre-avivo chips
- add support for fixed post/ref dividers
- add support for non-fractional fb dividers

By default avivo chips use the new algo and
pre-avivo chips use the old algo. Use the "new_pll"
module option to toggle between them.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add support for square microtiles on r3xx-r5xx
Marek Olšák [Sun, 14 Feb 2010 06:10:10 +0000]
drm/radeon/kms: add support for square microtiles on r3xx-r5xx

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: force pinning buffer into visible VRAM
Jerome Glisse [Fri, 19 Feb 2010 14:33:54 +0000]
drm/radeon/kms: force pinning buffer into visible VRAM

This patch properly set visible VRAM and enforce any pinned buffer
to be into visible VRAM. We might later add a flag to release this
constraint for some newer hw more clever than previous.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/evergreen: fix typo in cursor code
Alex Deucher [Tue, 23 Feb 2010 18:12:43 +0000]
drm/radeon/kms/evergreen: fix typo in cursor code

cursor x/y are surface relative.

fixes fdo bug 26551

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: implement reading active PCIE lanes on R600+
Rafał Miłecki [Thu, 18 Feb 2010 20:24:28 +0000]
drm/radeon/kms: implement reading active PCIE lanes on R600+

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: for downclocking non-mobility check PERFORMANCE state
Rafał Miłecki [Sun, 21 Feb 2010 22:46:30 +0000]
drm/radeon/kms: for downclocking non-mobility check PERFORMANCE state

AtomBIOS tables on non-mobility GPU do not contain POWERSAVE/BATTERY.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: simplify storing current and requested PM mode
Rafał Miłecki [Sat, 20 Feb 2010 23:15:04 +0000]
drm/radeon/kms: simplify storing current and requested PM mode

We kept pointers to requested and current clock modes in every power state.
That was useless, more /global/ pointers in power struct are enough.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon: fixes for r6xx/r7xx gfx init
Alex Deucher [Fri, 19 Feb 2010 21:22:31 +0000]
drm/radeon: fixes for r6xx/r7xx gfx init

- updated swizzle modes for backend map setup
- fix programming of a few gfx regs
- properly handle pipe/backend setup on LE cards

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/rv740: fix backend setup
Alex Deucher [Fri, 19 Feb 2010 21:07:02 +0000]
drm/radeon/rv740: fix backend setup

This patch fixes occlusion queries and rendering errors
on rv740 boards. Hardcoding the backend map is not an optimal
solution, but a better fix is being worked on.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix R3XX/R4XX memory controller initialization
Jerome Glisse [Thu, 18 Feb 2010 14:23:49 +0000]
drm/radeon/kms: fix R3XX/R4XX memory controller initialization

Version 2 of memory controller did break the initialization for
R3XX/R4XX hardware. This patch fix it.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years ago[rfc] drm/radeon/kms: pm debugging check for vbl.
Dave Airlie [Thu, 18 Feb 2010 05:58:36 +0000]
[rfc] drm/radeon/kms: pm debugging check for vbl.

This patch adds a check on avivo chips to see if we are in the VBL
region for the active crtcs when we trigger the engine change.

I appear to have glitches locally on pm transistion (not sure all
fixes are in yet) and this at least seems to be correct here,
maybe others can test on systems with no glitches.

9 years agodrm/radeon: Fix memory allocation failures in the preKMS command stream checking.
Pauli Nieminen [Mon, 1 Feb 2010 17:11:16 +0000]
drm/radeon: Fix memory allocation failures in the preKMS command stream checking.

Allocation of single large block of memory may fail under memory
presure. drm_buffer object can hold one large block of data in
multiple independ pages which preents alloation failures.

This patch converts all access to command stream to use drm_buffer
interface. All direct access to array has to go tough drm_buffer
functions to get correct pointer.

Outputting the command stream to ring buffer needs to be awear of
the split nature of drm_buffer. The output operation requires the
new OUT_RING_DRM_BUFFER.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm: Add generic multipart buffer.
Pauli Nieminen [Mon, 1 Feb 2010 17:11:15 +0000]
drm: Add generic multipart buffer.

Allocating multiple pages of memory for data that is coming
from user space may fail. To fix memory allocation failures
the buffer object should be split to multiple independ pages.

drm buffer provides generic interface to copy and process
large data arrays from user space.

Interface includes allocation and free functions to allocate
the buffer object and data storage pages.

All access operations are performed relative to a internal
pointer which is advanced with drm_buffer_advance function.

The buffer can be accessed using drm_buffer_pointer_to_XXX
functions if it is known that requested object doesn't split
over a page boundary. These functions don't do any error
checking to maximize performance.

If there is large object which could be split there is special
drm_buffer_read_object function. drm_buffer_read_object takes
a pointer as argument which is used as temporary store for
data if it is split over boundary in the buffer.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: simplify memory controller setup V2
Jerome Glisse [Wed, 17 Feb 2010 21:54:29 +0000]
drm/radeon/kms: simplify memory controller setup V2

Get rid of _location and use _start/_end also simplify the
computation of vram_start|end & gtt_start|end. For R1XX-R2XX
we place VRAM at the same address of PCI aperture, those GPU
shouldn't have much memory and seems to behave better when
setup that way. For R3XX and newer we place VRAM at 0. For
R6XX-R7XX AGP we place VRAM before or after AGP aperture this
might limit to limit the VRAM size but it's very unlikely.
For IGP we don't change the VRAM placement.

Tested on (compiz,quake3,suspend/resume):
PCI/PCIE:RV280,R420,RV515,RV570,RV610,RV710
AGP:RV100,RV280,R420,RV350,RV620(RPB*),RV730
IGP:RS480(RPB*),RS690,RS780(RPB*),RS880

RPB: resume previously broken

V2 correct commit message to reflect more accurately the bug
and move VRAM placement to 0 for most of the GPU to avoid
limiting VRAM.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon: Add asic hook for dma copy to r200 cards.
Pauli Nieminen [Thu, 11 Feb 2010 17:25:47 +0000]
drm/radeon: Add asic hook for dma copy to r200 cards.

r200 cards have dma engine which can be used to tranfer data
between vram and system memory.

r300 dma engine registers match r200 dma engine. Enabling
dma copy for r200 is simple as hooking r200 asic to already
existing function r300_copy_dma.

Rename r300_dma_copy to r200_dma_copyto reflect that supports
starts from r200 cards.

v2: Created a new asic object for r200 cards.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: Create asic structure for r300 pcie cards.
Pauli Nieminen [Thu, 11 Feb 2010 17:55:35 +0000]
drm/radeon/kms: Create asic structure for r300 pcie cards.

Setting global asic structure to point to different function
would cause problem in system where is multiple r300 cards
with different bus type.

r300_asic_pcie is just copy from r300_asic with gart tlb
functions replaced with pcie versions.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: remove unused r600_gart_clear_page
Alex Deucher [Thu, 11 Feb 2010 16:00:13 +0000]
drm/radeon/kms: remove unused r600_gart_clear_page

r6xx/r7xx use the rs600 variant.  This old one just
confuses things.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: remove HDP flushes from fence emit (v2)
Alex Deucher [Thu, 11 Feb 2010 15:47:52 +0000]
drm/radeon/kms: remove HDP flushes from fence emit (v2)

r600_ioctl_wait_idle() now handles this.

v2: update blit fence counts

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add LVDS pll quirk for Dell Studio 15
Alex Deucher [Tue, 16 Feb 2010 16:44:21 +0000]
drm/radeon/kms: add LVDS pll quirk for Dell Studio 15

fixes fdo bug 26358

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: simplify picking power state
Rafał Miłecki [Thu, 11 Feb 2010 21:50:06 +0000]
drm/radeon/kms: simplify picking power state

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: accept slightly overclocked power modes
Rafał Miłecki [Thu, 11 Feb 2010 22:16:36 +0000]
drm/radeon/kms: accept slightly overclocked power modes

Fixes fdo bug #26329

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Tested-by: Tobias Jakobi <liquid.acid@gmx.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: isolate audio engine management, change fini order
Rafał Miłecki [Thu, 11 Feb 2010 21:58:52 +0000]
drm/radeon/kms: isolate audio engine management, change fini order

We should stop audio-state-reading timer before we turn off engine

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/r600: fix warnings in CS checker
Alex Deucher [Tue, 16 Feb 2010 16:28:36 +0000]
drm/radeon/r600: fix warnings in CS checker

drivers/gpu/drm/radeon/r600_cs.c: In function ‘r600_cs_track_check’:
drivers/gpu/drm/radeon/r600_cs.c:166: warning: ‘bpe’ may be used uninitialized in this function
drivers/gpu/drm/radeon/r600_cs.c:166: note: ‘bpe’ was declared here

drivers/gpu/drm/radeon/r600_cs.c: In function ‘r600_cs_parse’:
drivers/gpu/drm/radeon/r600_cs.c:938: warning: ‘bpe’ may be used uninitialized in this function
drivers/gpu/drm/radeon/r600_cs.c:938: note: ‘bpe’ was declared here

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix bo's fence association
Jerome Glisse [Mon, 15 Feb 2010 20:36:33 +0000]
drm/radeon/kms: fix bo's fence association

Previous code did associate fence to bo before the fence was emited
and it also didn't lock protected access to ttm sync_obj member.
Both of this flaw leads to possible race between different code
path. This patch fix this by associating fence only once the fence
is emitted and properly lock protect access to sync_obj member of
ttm.

Fix:
https://bugs.freedesktop.org/show_bug.cgi?id=26438
and likely similar others bugs
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix indirect buffer management V2
Jerome Glisse [Mon, 15 Feb 2010 20:36:13 +0000]
drm/radeon/kms: fix indirect buffer management V2

There is 3 different distinct states for an indirect buffer (IB) :
  1- free with no fence
  2- free with a fence
  3- non free (fence doesn't matter)
Previous code mixed case 2 & 3 in a single one leading to possible
catastrophique failure. This patch rework the handling and properly
separate each case. So when you get ib we set the ib as non free and
fence status doesn't matter. Fence become active (ie has a meaning
for the ib code) once the ib is scheduled or free. This patch also
get rid of the alloc bitmap as it was overkill, we know go through
IB pool list like in a ring buffer as the oldest IB is the first
one the will be free.

Fix :
https://bugs.freedesktop.org/show_bug.cgi?id=26438
and likely other bugs.

V2 remove the scheduled list, it's useless now, fix free ib scanning

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: flush HDP cache on GART table updates.
Dave Airlie [Mon, 15 Feb 2010 05:54:45 +0000]
drm/radeon/kms: flush HDP cache on GART table updates.

Suggested by Alex Deucher @ AMD

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix r600/r700 cs checker to avoid double kfree
Jerome Glisse [Thu, 11 Feb 2010 11:44:32 +0000]
drm/radeon/kms: fix r600/r700 cs checker to avoid double kfree

radeon_cs kfree the tracker structure but for r6xx/r7xx we want
to kfree it inside the parse function because we share it with
the UMS code path. Set tracker to NULL after freeing it will
avoid double free.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: set gart pages to invalid on unbind and point to dummy page
Dave Airlie [Fri, 5 Feb 2010 06:00:07 +0000]
drm/radeon/kms: set gart pages to invalid on unbind and point to dummy page

this uses a new entrypoint to invalidate gart entries instead of using 0.
Changed to rather than pointing to 0 address point empty entry to dummy
page. This might help to avoid hard lockup if for some wrong
reasons GPU try to access unmapped GART entry.

I'm not 100% sure this is going to work, we probably need to allocate
a dummy page and point all the GTT entries at it similiar to what AGP does.
but we can test this first I suppose.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: check for valid PCI bios and not OF rom
Dave Airlie [Thu, 11 Feb 2010 05:38:23 +0000]
drm/radeon/kms: check for valid PCI bios and not OF rom

stops us trying to treat a OF rom as a PCI rom.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: Test rdev->bios centrally in combios_get_table_offset().
Michel Dänzer [Wed, 10 Feb 2010 10:05:11 +0000]
drm/radeon/kms: Test rdev->bios centrally in combios_get_table_offset().

It's happened time and time again (most recently with the support for EDID
hardcoded in the BIOS ROM) that new code didn't check for rdev->bios being
non-NULL before triggering dereferences of it. This would result in an
oops/panic on setups with no BIOS ROM. Hopefully this central test will be
more robust.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: r600/r700 command stream checker
Jerome Glisse [Wed, 10 Feb 2010 22:30:05 +0000]
drm/radeon/kms: r600/r700 command stream checker

This patch add cs checker to r600/r700 hw. Command stream checking
will rewrite some of the cs value in order to restrict GPU access
to BO size. This doesn't break old userspace but just enforce safe
value. It should break any things that was using the r600/r700 cs
ioctl to do forbidden things (malicious software), though we are
not aware of such things.

Here is the list of thing we check :
- enforcing resource size
- enforcing color buffer slice tile max, will restrict cb access
- enforcing db buffer slice tile max, will restrict db access

We don't check for shader bigger than the BO in which they are
supposed to be, such use would lead to GPU lockup and is harmless
from security POV, as far as we can tell (note that even checking
for this wouldn't prevent someone to write bogus shader that lead
to lockup).

This patch has received as much testing as humanly possible with
old userspace to check that it didn't break such configuration.
However not all the applications out there were tested, thus it
might broke some odd, rare applications.

[airlied: fix rules for cs checker for parallel builds]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/evergreen: adapt to i2c changes
Alex Deucher [Tue, 9 Feb 2010 23:22:00 +0000]
drm/radeon/kms/evergreen: adapt to i2c changes

original evergreen patches we against a kernel tree
without my radeon i2c algo changes.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/evergreen: fix multi-head
Alex Deucher [Tue, 9 Feb 2010 22:18:48 +0000]
drm/radeon/kms/evergreen: fix multi-head

Fix a typo in crtc offset setup that set the crtc
instances wrong for all crtcs except the first.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/atom: replace 0/1 in crtc code with ATOM_DISABLE/ATOM_ENABLE
Alex Deucher [Tue, 9 Feb 2010 17:04:43 +0000]
drm/radeon/kms/atom: replace 0/1 in crtc code with ATOM_DISABLE/ATOM_ENABLE

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix prescale calculations
Alex Deucher [Mon, 8 Feb 2010 19:34:43 +0000]
drm/radeon/kms: fix prescale calculations

Pre-pcie chips seem to use the reference clock
rather than the sclk.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add initial Evergreen support (Radeon HD 5xxx)
Alex Deucher [Tue, 12 Jan 2010 22:54:34 +0000]
drm/radeon/kms: add initial Evergreen support (Radeon HD 5xxx)

This adds initial Evergreen KMS support, it doesn't include
any acceleration features or interrupt handling yet.

Major changes are DCE4 handling for PLLs for the > 2 crtcs.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: update atombios.h to latest upstream.
Alex Deucher [Tue, 12 Jan 2010 22:17:33 +0000]
drm/radeon/kms: update atombios.h to latest upstream.

This merges ugly whitespace we want to keep for consistency
along with the latest upstream changes.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: bogus cs recorder utilities
Jerome Glisse [Thu, 28 Jan 2010 17:22:31 +0000]
drm/radeon/kms: bogus cs recorder utilities

This add an utilities function radeon_ib_bogus_add which will
save an ib into a list of ib which can then be dumped using
debugfs. Once dumped the ib is removed from the list. This
should allow to save & capute ib for further debugging.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: use wait queue (events) for VBLANK sync
Rafał Miłecki [Thu, 7 Jan 2010 23:22:47 +0000]
drm/radeon/kms: use wait queue (events) for VBLANK sync

This already simplifies code significally and makes it maintaible
in case of adding memory reclocking plus voltage changing in future.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: use udelay for short delays
Dave Airlie [Sat, 30 Jan 2010 21:07:14 +0000]
drm/radeon/kms: use udelay for short delays

For usec delays use udelay instead of scheduling, this should
allow reclocking to happen faster.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: take the pm mutex when using hw i2c
Alex Deucher [Sat, 6 Feb 2010 22:06:42 +0000]
drm/radeon/kms: take the pm mutex when using hw i2c

we need a constant sclk for i2c prescale.  Also,
get the current sclk when calculating prescale rather
than using the default sclk.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: dynclks fixes
Alex Deucher [Fri, 5 Feb 2010 05:55:32 +0000]
drm/radeon/kms: dynclks fixes

- only r4xx/r5xx/rs6xx/rs740 have clock gating atom table,
so disable it on r6xx.  it's already disabled on r7xx
- check to make sure the clock_gating hook exists before
calling it.  This avoids a segfault on asics without
that function.
- remove unused static power management function.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: get_power_state early, not when processing IRQ
Rafał Miłecki [Thu, 24 Dec 2009 02:28:33 +0000]
drm/radeon/kms: get_power_state early, not when processing IRQ

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: use power states for dynamic reclocking
Alex Deucher [Wed, 23 Dec 2009 19:39:36 +0000]
drm/radeon/kms: use power states for dynamic reclocking

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add code to select power state
Alex Deucher [Wed, 23 Dec 2009 19:28:05 +0000]
drm/radeon/kms: add code to select power state

not hooked up yet.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add a power state type based on power state flags
Alex Deucher [Wed, 23 Dec 2009 18:21:58 +0000]
drm/radeon/kms: add a power state type based on power state flags

The idea is to flag a power state with a certain type and use
that type to decide on what state to select.  On r6xx+, we
select a state and then transition between clock modes in that
state.  On pre-r6xx, we transition between states directly.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: don't set pcie lanes for ignored power_state
Rafał Miłecki [Tue, 22 Dec 2009 23:42:43 +0000]
drm/radeon/kms: don't set pcie lanes for ignored power_state

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: pull power mode info from bios tables (v3)
Alex Deucher [Mon, 28 Dec 2009 18:58:44 +0000]
drm/radeon/kms: pull power mode info from bios tables (v3)

The general idea is to validate the current hw state
against the set of power states and select a power
state based on that.  This patch just pulls the power
states from the bios and prints the information.  It
is not currently hooked up in the actual power management
code.  Hooking it up will require reworking the the current
power state selection code and will be handled in a future
patch.

Additionally, we'd need to decide on some default lower
power states for cards without power tables.

v2 - increment state_index after checking for default state
v3 - fix typo in pm init on pre-atom cards, handle pre-atom
cards without x86 bioses

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add functions to get current pcie lanes
Alex Deucher [Wed, 23 Dec 2009 15:07:50 +0000]
drm/radeon/kms: add functions to get current pcie lanes

Currently unused.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add dynamic engine reclocking (V9)
Rafał Miłecki [Tue, 22 Dec 2009 22:02:16 +0000]
drm/radeon/kms: add dynamic engine reclocking (V9)

V2: reorganize functions, fix modesetting calls
V3: rebase patch, use radeon's workqueue
V4: enable on tested chipsets only, request VBLANK IRQs
V5: enable PM on older hardware (IRQs, mode_fixup, dpms)
V6: use separate dynpm module parameter
V7: drop RADEON_ prefix, set minimum mode for dpms off
V8: update legacy encoder call, fix order in rs600 IRQ
V9: update compute_clocks call in legacy, not only DPMS_OFF

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: consolidate crtc count in rdev
Alex Deucher [Mon, 1 Feb 2010 21:02:25 +0000]
drm/radeon/kms: consolidate crtc count in rdev

Set the number of crtcs in rdev at crtc init and use it
whenever we need the crtc count rather than recalculating
it everytime.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/r600: reduce gpu cache flushing
Alex Deucher [Thu, 4 Feb 2010 16:01:52 +0000]
drm/radeon/kms/r600: reduce gpu cache flushing

Only flush the gpu caches before we submit a fence.
This leads to a small performance boost when we take
the extra gpu cache flushes out of the ddx and mesa.
Once this patch is in and the drm version is bumped,
we can remove the flushes from the ddx and drm.

Also, remove the extra cache flushes from the blit
routine.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: switch all KMS driver ioctls to unlocked.
Dave Airlie [Wed, 3 Feb 2010 09:17:14 +0000]
drm/radeon/kms: switch all KMS driver ioctls to unlocked.

Internal locking should be sufficent for all these cases.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/atom: add a helper function to get the radeon connector priv
Alex Deucher [Tue, 2 Feb 2010 00:06:06 +0000]
drm/radeon/kms/atom: add a helper function to get the radeon connector priv

This is used in a lot of places in the atom encoder code.

While here fix the spelling of crtc_source_params.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms/atom: clean up spread spectrum code
Alex Deucher [Mon, 1 Feb 2010 21:39:11 +0000]
drm/radeon/kms/atom: clean up spread spectrum code

use a union for the atom args.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add pll quirk for toshiba laptop panel
Alex Deucher [Tue, 2 Feb 2010 17:06:28 +0000]
drm/radeon/kms: add pll quirk for toshiba laptop panel

The panel on the Toshiba A300-1BU laptop does not like the
PLL dividers selected by the avivo pll algo, but works fine
using the older method.  Add a quirk to handle it.

Should fix fdo bug 26358.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>

9 years agodrm/radeon/kms: rework pll algo selection
Alex Deucher [Tue, 2 Feb 2010 17:05:01 +0000]
drm/radeon/kms: rework pll algo selection

Rework the pll algo selection so that the pll algo
in use can be selected more easily.  This allows
us to select different pll divider selection algos
for specific monitors that work better with one algo
or the other.  This is needed for the next patch which
adds an LVDS pll quirk for a specific notebook.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: clean up some low-hanging magic numbers
Alex Deucher [Fri, 5 Feb 2010 06:58:28 +0000]
drm/radeon/kms: clean up some low-hanging magic numbers

Switch some magic numbers to their proper defines.
The register header madness needs to be cleaned up
at some point.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add support for hardcoded edids in rom (v2)
Alex Deucher [Fri, 5 Feb 2010 09:21:19 +0000]
drm/radeon/kms: add support for hardcoded edids in rom (v2)

Some servers hardcode an edid in rom so that they will
work properly with KVMs.  This is a port of the relevant
code from the ddx.

[airlied: reworked to validate edid at boot stage - and
remove special quirk, if there is a valid EDID in the BIOS rom
we'll just try and use it.]

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add workaround for rn50/rv100 servers
Alex Deucher [Fri, 5 Feb 2010 08:34:16 +0000]
drm/radeon/kms: add workaround for rn50/rv100 servers

Some servers have two VGA ports but only report
one in the bios connector tables.  On these systems
always set up the TV DAC so that it displays properly
even if the bios is wrong.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add support for hw i2c on r1xx-r5xx
Alex Deucher [Wed, 23 Dec 2009 08:23:21 +0000]
drm/radeon/kms: add support for hw i2c on r1xx-r5xx

wire hw i2c support into radeon i2c algo.

fixes merged:
- handle bus probing correctly
- use meaningful error numbers
- abort if transaction fails
- The line mapping is different depending on the asic.
- protect hw i2c engine with a mutex
- rs300 doesn't have a pin select bit
- r200 has a different pin select setup

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: add radeon i2c algo
Alex Deucher [Tue, 22 Dec 2009 20:04:48 +0000]
drm/radeon/kms: add radeon i2c algo

Currently just a wrapper around bit algo

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix r300 vram width calculations
Dave Airlie [Fri, 5 Feb 2010 03:57:03 +0000]
drm/radeon/kms: fix r300 vram width calculations

This was incorrect according to the docs and the UMS driver does
it like this.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: rs400/480 MC setup is different than r300.
Dave Airlie [Fri, 5 Feb 2010 03:41:54 +0000]
drm/radeon/kms: rs400/480 MC setup is different than r300.

Boot testing on my rs480 laptop found the MC idle never happened
on startup, a quick check with AMD found the idle bit is in a different
place on the rs4xx than r300.

Implement a new rs400 mc idle function to fix this.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: make initial state of load detect property correct.
Dave Airlie [Wed, 27 Jan 2010 06:07:15 +0000]
drm/radeon/kms: make initial state of load detect property correct.

this was incorrect on my rs480.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: disable HDMI audio for now on rv710/rv730
Dave Airlie [Fri, 5 Feb 2010 01:57:42 +0000]
drm/radeon/kms: disable HDMI audio for now on rv710/rv730

Support isn't correct yet and we are getting green tinges on the
displays.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: don't call suspend path before cleaning up GPU
Jerome Glisse [Tue, 2 Feb 2010 10:51:45 +0000]
drm/radeon/kms: don't call suspend path before cleaning up GPU

In suspend path we unmap the GART table while in cleaning up
path we will unbind buffer and thus try to write to unmapped
GART leading to oops. In order to avoid this we don't call the
suspend path in cleanup path. Cleanup path is clever enough
to desactive GPU like the suspend path is doing, thus this was
redondant.

Tested on: RV370, R420, RV515, RV570, RV610, RV770 (all PCIE)

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrivers/gpu/drm/radeon/radeon_combios.c: fix warning
Andrew Morton [Tue, 2 Feb 2010 22:40:29 +0000]
drivers/gpu/drm/radeon/radeon_combios.c: fix warning

drivers/gpu/drm/radeon/radeon_combios.c: In function 'radeon_combios_get_lvds_info':
drivers/gpu/drm/radeon/radeon_combios.c:893: warning: comparison is always false due to limited range of data type

Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoati_pcigart: fix printk format warning
Randy Dunlap [Tue, 2 Feb 2010 22:40:33 +0000]
ati_pcigart: fix printk format warning

Fix ati_pcigart printk format warning:

drivers/gpu/drm/ati_pcigart.c:115: warning: format '%Lx' expects type 'long long unsigned int', but argument 3 has type 'dma_addr_t'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/r100/kms: Emit cache flush to the end of command buffer. (v2)
Pauli Nieminen [Thu, 4 Feb 2010 17:20:53 +0000]
drm/r100/kms: Emit cache flush to the end of command buffer. (v2)

Cache flush is required in case CPU is accessing rendered data.

This fixes glean/readPixSanity test case and random rendering
errors in sauerbraten and warzone2100.

v2 Fix comment ordering in r100_fence_ring_emit and remove extra
   defines added in first version.

Signed-off-by: Pauli Nieminen <suokkos@gmail.com>
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix regression rendering issue on R6XX/R7XX
Jerome Glisse [Thu, 4 Feb 2010 19:36:39 +0000]
drm/radeon/kms: fix regression rendering issue on R6XX/R7XX

It seems that some R6XX/R7XX silently ignore HDP flush when
programmed through ring, this patch addback an ioctl callback
to allow R6XX/R7XX hw to perform such flush through MMIO in
order to fix a regression. For more details see:

http://bugzilla.kernel.org/show_bug.cgi?id=15186

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: move blit initialization after we disabled VGA
Jerome Glisse [Thu, 4 Feb 2010 16:27:27 +0000]
drm/radeon/kms: move blit initialization after we disabled VGA

VGA might be overwritting VRAM and corrupt our blit shader leading
to corruption, it likely won't happen if you load fbcon right after
radeon. Thanks to Shawn Starr and Andre Maasikas for tracking down
this issue.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.
Michel Dänzer [Fri, 22 Jan 2010 08:20:00 +0000]
drm/radeon/kms: Fix oops after radeon_cs_parser_init() failure.

If radeon_cs_parser_init() fails, radeon_cs_ioctl() calls
radeon_cs_parser_fini() with the non-zero error value. The latter dereferenced
parser->ib which hasn't been initialized yet -> boom. Add a test for parser->ib
being non-NULL before dereferencing it.

Signed-off-by: Michel Dänzer <daenzer@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: move radeon KMS on/off switch out of staging.
Dave Airlie [Mon, 1 Feb 2010 01:35:47 +0000]
drm/radeon/kms: move radeon KMS on/off switch out of staging.

We are happy enough that the KMS driver is stable enough for enough people
for the kms enable/disable to leave staging. Distros can now contemplate
turning this on.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: Bailout of blit if error happen & protect with mutex V3
Jerome Glisse [Fri, 22 Jan 2010 14:19:00 +0000]
drm/radeon/kms: Bailout of blit if error happen & protect with mutex V3

If an error happen in r600_blit_prepare_copy report it rather
than WARNING and keeping execution. For instance if ib allocation
failed we did just warn about but then latter tried to access
NULL ib ptr causing oops. This patch also protect r600_copy_blit
with a mutex as otherwise one process might overwrite blit temporary
data with new one possibly leading to GPU lockup.

Should partialy or totaly fix:
https://bugzilla.redhat.com/show_bug.cgi?id=553279

V2 failing blit initialization is not fatal, fallback to memcpy when
this happen
V3 init blit before startup as we pin in startup, remove duplicate
code (this one was actualy tested unlike V2)

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/vmwgfx: Don't send bad flags to the host
Jakob Bornecrantz [Sat, 30 Jan 2010 03:38:08 +0000]
drm/vmwgfx: Don't send bad flags to the host

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/vmwgfx: Request SVGA version 2 and bail if not found
Peter Hanzel [Sat, 30 Jan 2010 03:38:07 +0000]
drm/vmwgfx: Request SVGA version 2 and bail if not found

This fixes the driver not loading on older versions of VMware.

Signed-off-by: Peter Hanzel <hanzelpeter@gmail.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/vmwgfx: Correctly detect 3D
Jakob Bornecrantz [Sat, 30 Jan 2010 03:38:06 +0000]
drm/vmwgfx: Correctly detect 3D

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c
Austin Yuan [Thu, 21 Jan 2010 05:45:40 +0000]
drm/ttm: remove unnecessary save_flags and ttm_flag_masked in ttm_bo_util.c

Signed-off-by: Austin Yuan <shengquan.yuan@gmail.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/kms: Remove incorrect comment in struct drm_mode_modeinfo
Marcin Kościelnicki [Sat, 23 Jan 2010 00:25:28 +0000]
drm/kms: Remove incorrect comment in struct drm_mode_modeinfo

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/ttm: remove padding from ttm_ref_object on 64bit builds
Richard Kennedy [Tue, 26 Jan 2010 17:10:48 +0000]
drm/ttm: remove padding from ttm_ref_object on 64bit builds

Re-order structure ttm_ref_object to remove 8 bytes of alignment padding
on 64 bit builds, so shrinking its size from 72 to 64 bytes allowing it
to fit into a smaller slab.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: release agp on error.
Dave Airlie [Mon, 1 Feb 2010 01:22:10 +0000]
drm/radeon/kms: release agp on error.

if we get an error, release the AGP if we've acquired it already.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp...
John Kacur [Sun, 31 Jan 2010 19:38:03 +0000]
drm/kms/radeon/agp: Move the check of the aper_size after drm_acp_acquire and drm_agp_info

First call drm_agp_acquire to check if agp has been acquired.
Second call drm_agp_info to fill in the info data struct, including aper_size.
Finally do the check to see if the aper_size makes sense.

Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument...
John Kacur [Sun, 31 Jan 2010 19:38:02 +0000]
drm/kms/radeon/agp: Fix warning, format ‘%d’ expects type ‘int’, but argument 4 has type ‘size_t’

- Fix warning by using %zu instead of %d for size_t
- Fix spelling mistake, "to" should be "too".

Signed-off-by: John Kacur <jkacur@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching.
Francisco Jerez [Tue, 12 Jan 2010 17:49:43 +0000]
drm/ttm: Avoid conflicting reserve_memtype during ttm_tt_set_page_caching.

Fixes errors like:
> reserve_ram_pages_type failed 0x15b7a000-0x15b7b000, track 0x8, req 0x10
when a BO is moved between WC and UC areas.

Reported-by: Xavier Chantry <shiningxc@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/kms/radeon: pick digitial encoders smarter. (v3)
Dave Airlie [Thu, 28 Jan 2010 07:15:25 +0000]
drm/kms/radeon: pick digitial encoders smarter. (v3)

booting a Lenovo W500 with LVDS + DP outputs showed up a TODO we had
on our list, to pick a correct digital encoder block. The LVTMA
encoder requires the second digital encoder, all others can use any
encoder at all.

This fixes the digital encoder selection logic to enable LVDS/DP combos
to work okay.

V2: fix silly addition of connector dig_block and cleanup the other
places in the code that pick the encoder.

V3: rename to dig_encoder and clean up further - also fix
the picking algorithm.

tested on Lenovo W500 + desktop 3650 cards.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: use active device to pick connector for encoder
Dave Airlie [Fri, 29 Jan 2010 05:55:30 +0000]
drm/radeon/kms: use active device to pick connector for encoder

On the W500 we have UNIPHY routed to both DVI and DP, this seems
to always pick the DVI connector which means link training fails.

Switch to using active device to pick the connector, this seems
like it should be safe from a code review, and it fixes things
a bit more here.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.
Dave Airlie [Fri, 29 Jan 2010 05:31:47 +0000]
drm/radeon/kms: fix incorrect logic in DP vs eDP connector checking.

This makes displayport work again here.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: preface warning printk with driver name
Dave Airlie [Mon, 25 Jan 2010 06:13:55 +0000]
drm/radeon/kms: preface warning printk with driver name

This just adds a little more info to the warning for old -ati/mesa
userspaces.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: drop unnecessary printks.
Dave Airlie [Mon, 25 Jan 2010 06:13:12 +0000]
drm/radeon/kms: drop unnecessary printks.

These printks aren't required anymore.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm: fix regression in fb blank handling
Zhenyu Wang [Mon, 18 Jan 2010 08:47:04 +0000]
drm: fix regression in fb blank handling

commit 731b5a15a3b1474a41c2ca29b4c32b0f21bc852e
Author: James Simmons <jsimmons@infradead.org>
Date:   Thu Oct 29 20:39:07 2009 +0000

    drm/kms: properly handle fbdev blanking

uses DRM_MODE_DPMS_ON for FB_BLANK_NORMAL, but DRM_MODE_DPMS_ON
is actually for turning output on instead of blank.

This makes fb blank broken on my T61, it put LVDS on but leave
pipe disabled which made screen totally white or caused some
'burning' effect.

[airlied: James objects to this but at this point in 2.6.33,
I can't see a patch that will fix this properly like he wants coming
in time and otherwise this is a regression - proper fix for 2.6.34
hopefully.]

Cc: James Simmons <jsimmons@infradead.org>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: make hibernate work on IGPs
Dave Airlie [Mon, 25 Jan 2010 03:08:08 +0000]
drm/radeon/kms: make hibernate work on IGPs

This is the least invasive fix without migrating the radeon driver
to pm_ops from what I can see. We just always migrate VRAM objects
on IGPs for now and we can fix it up later to migrate depending
on STR vs STD.

Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/vmwgfx: Optimize memory footprint for DMA buffers.
Thomas Hellstrom [Sat, 16 Jan 2010 15:05:05 +0000]
drm/vmwgfx: Optimize memory footprint for DMA buffers.

Use VRAM whenever there is free space for DMA buffers,
but use system GMR memory if using VRAM would cause an eviction.

This significantly reduces the guest system memory usage for
VMs with a large amount of VRAM allocated.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/ttm: Allow system memory as a busy placement.
Thomas Hellstrom [Sat, 16 Jan 2010 15:05:04 +0000]
drm/ttm: Allow system memory as a busy placement.

This is needed to fix a vmwgfx memory usage bug.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoMerge remote branch 'korg/drm-radeon-next' into drm-linus
Dave Airlie [Mon, 25 Jan 2010 06:04:21 +0000]
Merge remote branch 'korg/drm-radeon-next' into drm-linus

* korg/drm-radeon-next:
  drm/radeon/kms: fix legacy get_engine/memory clock
  drm/radeon/kms/atom: atom parser fixes
  drm/radeon/kms: clean up atombios pll code
  drm/radeon/kms: clean up pll struct
  drm/radeon/kms/atom: fix crtc lock ordering
  drm/radeon: r6xx/r7xx possible security issue, system ram access
  drm/radeon/kms: r600/r700 don't test ib if ib initialization fails
  drm/radeon/kms: Forbid creation of framebuffer with no valid GEM object
  drm/radeon/kms: r600 handle irq vector ring overflow
  drm/radeon/kms: r600/r700 don't process IRQ if not initialized
  drm/radeon/kms: r600/r700 disable irq at suspend
  drm/radeon/kms/r4xx: cleanup atom path
  drm/radeon/kms: fix atombios_crtc_set_base
  drm/radeon/kms/atom: upstream parser updates
  drm/radeon/kms/atom: fix some parser bugs
  drm/radeon/kms: fix hardcoded mmio size in register functions
  drm/radeon/kms/r100: fix bug in CS parser
  drm/radeon/kms/r200: fix bug in CS parser
  drm/radeon/kms/r200: fix bug in CS parser

9 years agoMerge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus
Dave Airlie [Mon, 25 Jan 2010 06:04:11 +0000]
Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus

* 'nouveau/for-airlied' of ../drm-nouveau-next:
  drm/nv50: prevent switching off SOR when in use for DVI-over-DP
  drm/nv50: fail auxch transaction if reply count not what we expect
  drm/nouveau: fix failure path if userspace specifies no valid memtypes
  drm/nouveau: report LVDS as disconnected if lid closed
  drm/nv50: prevent accidently turning off encoders we're actually using
  drm/nv50: fix alignment of per-channel fifo cache
  drm/nouveau: Evict buffers in VRAM before freeing sgdma
  drm/nouveau: Acknowledge DMA_VTX_PROTECTION PGRAPH interrupts
  drm/nouveau: fix thinko in nv04_instmem.c
  drm/nouveau: fix a race condition in nouveau_dma_wait()

9 years agodrm/ttm: Fix race condition in ttm_bo_delayed_delete (v3, final)
Luca Barbieri [Wed, 20 Jan 2010 19:01:30 +0000]
drm/ttm: Fix race condition in ttm_bo_delayed_delete (v3, final)

Resending this with Thomas Hellstrom's signoff for merging into 2.6.33

ttm_bo_delayed_delete has a race condition, because after we do:
kref_put(&nentry->list_kref, ttm_bo_release_list);

we are not holding the list lock and not holding any reference to
objects, and thus every bo in the list can be removed and freed at
this point.

However, we then use the next pointer we stored, which is not guaranteed
to be valid.

This was apparently the cause of some Nouveau oopses I experienced.

This patch rewrites the function so that it keeps the reference to nentry
until nentry itself is freed and we already got a reference to nentry->next.

v2 updated by me according to Thomas Hellstrom's feedback.
v3 proposed by Thomas Hellstrom. Commit comment updated by me.

Both updates fixed minor efficiency/style issues only and all three versions
should be correct.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/nv50: prevent switching off SOR when in use for DVI-over-DP
Ben Skeggs [Fri, 22 Jan 2010 00:57:01 +0000]
drm/nv50: prevent switching off SOR when in use for DVI-over-DP

Another hack because of us exposing each encoder block's function as
an encoder rather than exposing a single encoder that deals with them
all.

A proper fix will come, it's just rather invasive so this hack will
do until then.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>