12 years ago[XFRM]: Add module alias for transformation type.
Masahide NAKAMURA [Wed, 27 Jun 2007 06:57:49 +0000]
[XFRM]: Add module alias for transformation type.

It is clean-up for XFRM type modules and adds aliases with its
protocol:
 ESP, AH, IPCOMP, IPIP and IPv6 for IPsec
 ROUTING and DSTOPTS for MIPv6

It is almost the same thing as XFRM mode alias, but it is added
new defines XFRM_PROTO_XXX for preprocessing since some protocols
are defined as enum.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Acked-by: Ingo Oeser <netdev@axxeo.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6] MIP6: Loadable module support for MIPv6.
Masahide NAKAMURA [Wed, 27 Jun 2007 06:56:32 +0000]
[IPV6] MIP6: Loadable module support for MIPv6.

This patch makes MIPv6 loadable module named "mip6".

Here is a modprobe.conf(5) example to load it automatically
when user application uses XFRM state for MIPv6:

alias xfrm-type-10-43 mip6
alias xfrm-type-10-60 mip6

Some MIPv6 feature is not included by this modular, however,
it should not be affected to other features like either IPsec
or IPv6 with and without the patch.
We may discuss XFRM, MH (RAW socket) and ancillary data/sockopt
separately for future work.

Loadable features:
* MH receiving check (to send ICMP error back)
* RO header parsing and building (i.e. RH2 and HAO in DSTOPTS)
* XFRM policy/state database handling for RO

These are NOT covered as loadable:
* Home Address flags and its rule on source address selection
* XFRM sub policy (depends on its own kernel option)
* XFRM functions to receive RO as IPv6 extension header
* MH sending/receiving through raw socket if user application
  opens it (since raw socket allows to do so)
* RH2 sending as ancillary data
* RH2 operation with setsockopt(2)

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV6] MIP6: Kill unnecessary ifdefs.
Masahide NAKAMURA [Wed, 27 Jun 2007 06:51:41 +0000]
[IPV6] MIP6: Kill unnecessary ifdefs.

Kill unnecessary CONFIG_IPV6_MIP6.

o It is redundant for RAW socket to keep MH out with the config then
  it can handle any protocol.
o Clean-up at AH.

Signed-off-by: Masahide NAKAMURA <nakam@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[RTNETLINK]: Fix rtnetlink compat attribute patch
Patrick McHardy [Tue, 26 Jun 2007 10:23:44 +0000]
[RTNETLINK]: Fix rtnetlink compat attribute patch

Sent the wrong patch previously.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[RTNETLINK]: Add nested compat attribute
Patrick McHardy [Mon, 25 Jun 2007 21:30:16 +0000]
[RTNETLINK]: Add nested compat attribute

Add a nested compat attribute type that can be used to convert
attributes that contain a structure to nested attributes in a
backwards compatible way.

The attribute looks like this:

struct {
        [ compat contents ]
        struct rtattr {
                .rta_len        = total size,
                .rta_type       = type,
        } rta;
        struct old_structure struct;

        [ nested top-level attribute ]
        struct rtattr {
                .rta_len        = nest size,
                .rta_type       = type,
        } nest_attr;

        [ optional 0 .. n nested attributes ]
        struct rtattr {
                .rta_len        = private attribute len,
                .rta_type       = private attribute typ,
        } nested_attr;
        struct nested_data data;
};

Since both userspace and kernel deal correctly with attributes that are
larger than expected old versions will just parse the compat part and
ignore the rest.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NETLINK]: attr: add nested compat attribute type
Patrick McHardy [Mon, 25 Jun 2007 20:49:35 +0000]
[NETLINK]: attr: add nested compat attribute type

Add a nested compat attribute type that can be used to convert
attributes that contain a structure to nested attributes in a
backwards compatible way.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[SKBUFF]: Keep track of writable header len of headerless clones
Patrick McHardy [Mon, 25 Jun 2007 11:35:20 +0000]
[SKBUFF]: Keep track of writable header len of headerless clones

Currently NAT (and others) that want to modify cloned skbs copy them,
even if in the vast majority of cases its not necessary because the
skb is a clone made by TCP and the portion NAT wants to modify is
actually writable because TCP release the header reference before
cloning.

The problem is that there is no clean way for NAT to find out how
long the writable header area is, so this patch introduces skb->hdr_len
to hold this length. When a headerless skb is cloned skb->hdr_len
is set to the current headroom, for regular clones it is copied from
the original. A new function skb_clone_writable(skb, len) returns
whether the skb is writable up to len bytes from skb->data. To avoid
enlarging the skb the mac_len field is reduced to 16 bit and the
new hdr_len field is put in the remaining 16 bit.

I've done a few rough benchmarks of NAT (not with this exact patch,
but a very similar one). As expected it saves huge amounts of system
time in case of sendfile, bringing it down to basically the same
amount as without NAT, with sendmsg it only helps on loopback,
probably because of the large MTU.

Transmit a 1GB file using sendfile/sendmsg over eth0/lo with and
without NAT:

- sendfile eth0, no NAT: sys     0m0.388s
- sendfile eth0, NAT: sys     0m1.835s
- sendfile eth0: NAT + path: sys     0m0.370s (~ -80%)

- sendfile lo, no NAT: sys     0m0.258s
- sendfile lo, NAT: sys     0m2.609s
- sendfile lo, NAT + patch: sys     0m0.260s (~ -90%)

- sendmsg eth0, no NAT: sys     0m2.508s
- sendmsg eth0, NAT: sys     0m2.539s
- sendmsg eth0, NAT + patch: sys     0m2.445s (no change)

- sendmsg lo, no NAT: sys 0m2.151s
- sendmsg lo, NAT: sys     0m3.557s
- sendmsg lo, NAT + patch: sys     0m2.159s (~ -40%)

I expect other users can see a similar performance improvement,
packet mangling iptables targets, ipip and ip_gre come to mind ..

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NET]: qdisc_restart - couple of optimizations.
Krishna Kumar [Mon, 25 Jun 2007 02:57:27 +0000]
[NET]: qdisc_restart - couple of optimizations.

Changes :

- netif_queue_stopped need not be called inside qdisc_restart as
  it has been called already in qdisc_run() before the first skb
  is sent, and in __qdisc_run() after each intermediate skb is
  sent (note : we are the only sender, so the queue cannot get
  stopped while the tx lock was got in the ~LLTX case).

- BUG_ON((int) q->q.qlen < 0) was a relic from old times when -1
  meant more packets are available, and __qdisc_run used to loop
  when qdisc_restart() returned -1. During those days, it was
  necessary to make sure that qlen is never less than zero, since
  __qdisc_run would get into an infinite loop if no packets are on
  the queue and this bug in qdisc was there (and worse - no more
  skbs could ever get queue'd as we hold the queue lock too). With
  Herbert's recent change to return values, this check is not
  required.  Hopefully Herbert can validate this change. If at all
  this is required, it should be added to skb_dequeue (in failure
  case), and not to qdisc_qlen.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NET]: qdisc_restart - readability changes plus one bug fix.
Krishna Kumar [Mon, 25 Jun 2007 02:56:09 +0000]
[NET]: qdisc_restart - readability changes plus one bug fix.

New changes :

- Incorporated Peter Waskiewicz's comments.
- Re-added back one warning message (on driver returning wrong value).

Previous changes :

- Converted to use switch/case code which looks neater.

- "if (ret == NETDEV_TX_LOCKED && lockless)" is buggy, and the lockless
  check should be removed, since driver will return NETDEV_TX_LOCKED only
  if lockless is true and driver has to do the locking. In the original
  code as well as the latest code, this code can result in a bug where
  if LLTX is not set for a driver (lockless == 0) but the driver is written
  wrongly to do a trylock (despite LLTX being set), the driver returns
  LOCKED. But since lockless is zero, the packet is requeue'd instead of
  calling collision code which will issue warning and free up the skb.
  Instead this skb will be retried with this driver next time, and the same
  result will ensue. Removing this check will catch these driver bugs instead
  of hiding the problem. I am keeping this change to readability section
  since :
   a. it is confusing to check two things as it is; and
   b. it is difficult to keep this check in the changed 'switch' code.

- Changed some names, like try_get_tx_pkt to dev_dequeue_skb (as that is
  the work being done and easier to understand) and do_dev_requeue to
  dev_requeue_skb, merged handle_dev_cpu_collision and tx_islocked to
  dev_handle_collision (handle_dev_cpu_collision is a small routine with only
  one caller, so there is no need to have two separate routines which also
  results in getting rid of two macros, etc.

- Removed an XXX comment as it should never fail (I suspect this was related
  to batch skb WIP, Jamal ?). Converted some functions to original coding
  style of having the return values and the function name on same line, eg
  prio2list.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[CCID3]: Fix a bug in the send time processing
Gerrit Renker [Sat, 16 Jun 2007 16:48:50 +0000]
[CCID3]: Fix a bug in the send time processing

ccid3_hc_tx_send_packet currently returns 0 when the time difference between
current time and t_nom is less than 1000 microseconds.

In this case the packet is sent immediately; but, unlike other packets that can
be emitted on first attempt, it will not have its window counter updated and
its options set as required. This is a bug.

Fix: Require the time difference to be at least 1000 microseconds. The
algorithm then converges: time differences > 1000 microseconds trigger the
timer in dccp_write_xmit; after timer expiry this function is tried again; when
the time difference is less than 1000, the packet will have its options added
and window counter updated as required.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

12 years ago[CCID3]: Sending time: update to ktime_t
Gerrit Renker [Sat, 16 Jun 2007 16:34:02 +0000]
[CCID3]: Sending time: update to ktime_t

This updates the computation of t_nom and t_last_win_count to use the newer
gettimeofday interface.

Committer note: used ktime_to_timeval to set the 'now' variable to t_ld in
                ccid3hctx_no_feedback_timer

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

12 years ago[KTIME]: Introduce ktime_add_us
Arnaldo Carvalho de Melo [Sat, 16 Jun 2007 15:39:38 +0000]
[KTIME]: Introduce ktime_add_us

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

12 years ago[KTIME]: Introduce ktime_us_delta
Gerrit Renker [Sat, 16 Jun 2007 15:38:51 +0000]
[KTIME]: Introduce ktime_us_delta

This provides a reusable time difference function which returns the difference in
microseconds, as often used in the DCCP code.

Commiter note: renamed ktime_delta to ktime_us_delta and put it in ktime.h.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

12 years agoloss_interval: make struct dccp_li_hist_entry private
Arnaldo Carvalho de Melo [Mon, 28 May 2007 21:56:44 +0000]
loss_interval: make struct dccp_li_hist_entry private

net/dccp/ccids/lib/loss_interval.c is the only place where this struct is used.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

12 years agoloss_interval: Nuke dccp_li_hist
Arnaldo Carvalho de Melo [Mon, 28 May 2007 21:53:08 +0000]
loss_interval: Nuke dccp_li_hist

It had just a slab cache, so, for the sake of simplicity just make
dccp_trfc_lib module init routine create the slab cache, no need for users of
the lib to create a private loss_interval object.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

12 years agoloss_interval: Make dccp_li_hist_entry_{new,delete} private
Arnaldo Carvalho de Melo [Mon, 28 May 2007 21:25:12 +0000]
loss_interval: Make dccp_li_hist_entry_{new,delete} private

Not used outside the loss_interval code anymore.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

12 years agoloss_interval: unexport dccp_li_hist_interval_new
Arnaldo Carvalho de Melo [Mon, 28 May 2007 21:21:53 +0000]
loss_interval: unexport dccp_li_hist_interval_new

Now its only used inside the loss_interval code.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

12 years ago[DCCP] loss_interval: Move ccid3_hc_rx_update_li to loss_interval
Arnaldo Carvalho de Melo [Thu, 14 Jun 2007 20:41:28 +0000]
[DCCP] loss_interval: Move ccid3_hc_rx_update_li to loss_interval

Renaming it to dccp_li_update_li.

Also based on previous work by Ian McDonald.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

12 years ago[CCID3]: Pass ccid3_li_hist to ccid3_hc_rx_update_li
Arnaldo Carvalho de Melo [Thu, 14 Jun 2007 15:24:46 +0000]
[CCID3]: Pass ccid3_li_hist to ccid3_hc_rx_update_li

Now ccid3_hc_rx_update_li is ready to be moved to
net/dccp/ccids/lib/loss_interval, it uses the same interface as the other
functions there.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

12 years agoRemove accesses to ccid3_hc_rx_sock in ccid3_hc_rx_{update,calc_first}_li
Arnaldo Carvalho de Melo [Mon, 28 May 2007 21:04:14 +0000]
Remove accesses to ccid3_hc_rx_sock in ccid3_hc_rx_{update,calc_first}_li

This is a preparatory patch for moving these loss interval functions from
net/dccp/ccids/ccid3.c to net/dccp/ccids/lib/loss_interval.c.

Based on a patch by Ian McDonald.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

12 years agoloss_interval: Fix timeval initialisation
Ian McDonald [Mon, 28 May 2007 19:37:45 +0000]
loss_interval: Fix timeval initialisation

When compiling with EXTRA_CFLAGS=-W noticed that tstamp is not initialised
correctly in dccp_li_calc_first_li.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>

12 years agoFix dccp_sum_coverage
Ian McDonald [Mon, 28 May 2007 19:32:26 +0000]
Fix dccp_sum_coverage

When compiling with EXTRA_CFLAGS=-W notice that we have signed/unsigned issue
in dccp.h.

Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>

12 years agoccid3: Update copyrights
Ian McDonald [Mon, 28 May 2007 15:23:29 +0000]
ccid3: Update copyrights

Signed-off-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>

12 years ago[VLAN]: Use rtnl_link API
Patrick McHardy [Wed, 13 Jun 2007 19:07:54 +0000]
[VLAN]: Use rtnl_link API

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Introduce symbolic constants for flag values
Patrick McHardy [Wed, 13 Jun 2007 19:07:37 +0000]
[VLAN]: Introduce symbolic constants for flag values

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Keep track of number of QoS mappings
Patrick McHardy [Wed, 13 Jun 2007 19:07:22 +0000]
[VLAN]: Keep track of number of QoS mappings

Keep track of the number of configured ingress/egress QoS mappings to
avoid iteration while calculating the netlink attribute size.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Use 32 bit value for skb->priority mapping
Patrick McHardy [Wed, 13 Jun 2007 19:07:07 +0000]
[VLAN]: Use 32 bit value for skb->priority mapping

skb->priority has only 32 bits and even VLAN uses 32 bit values in its API.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Return proper error codes in register_vlan_device
Patrick McHardy [Wed, 13 Jun 2007 19:06:43 +0000]
[VLAN]: Return proper error codes in register_vlan_device

The returned device is unused, return proper error codes instead and avoid
having the ioctl handler guess the error.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Move device registation to seperate function
Patrick McHardy [Wed, 13 Jun 2007 19:06:29 +0000]
[VLAN]: Move device registation to seperate function

Move device registration and configuration of the underlying device to a
seperate function.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Split up device checks
Patrick McHardy [Wed, 13 Jun 2007 19:06:14 +0000]
[VLAN]: Split up device checks

Move the checks of the underlying device to a seperate function.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Move vlan_group allocation to seperate function
Patrick McHardy [Wed, 13 Jun 2007 19:05:59 +0000]
[VLAN]: Move vlan_group allocation to seperate function

Move group allocation to a seperate function to clean up the code a bit
and allocate groups before registering the device. Device registration
is globally visible and causes netlink events, so we shouldn't fail
afterwards.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Move some device intialization code to dev->init callback
Patrick McHardy [Wed, 13 Jun 2007 19:05:41 +0000]
[VLAN]: Move some device intialization code to dev->init callback

Move some device initialization code to new dev->init callback to make
it shareable with netlink. Additionally this fixes a minor bug, dev->iflink
is set after registration, which causes an incorrect value in the initial
netlink message.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[VLAN]: Convert name-based configuration functions to struct netdevice *
Patrick McHardy [Wed, 13 Jun 2007 19:05:22 +0000]
[VLAN]: Convert name-based configuration functions to struct netdevice *

Move the device lookup and checks to the ioctl handler under the RTNL and
change all name-based interfaces to take a struct net_device * instead.

This allows to use them from a netlink interface, which identifies devices
based on ifindex not name. It also avoids races between the ioctl interface
and the (upcoming) netlink interface since now all changes happen under the
RTNL.

As a nice side effect this greatly simplifies error handling in the helper
functions and fixes a number of incorrect error codes like -EINVAL for
device not found.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IFB]: Use rtnl_link API
Patrick McHardy [Wed, 13 Jun 2007 19:05:06 +0000]
[IFB]: Use rtnl_link API

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IFB]: Keep ifb devices on list
Patrick McHardy [Wed, 13 Jun 2007 19:04:51 +0000]
[IFB]: Keep ifb devices on list

Use a list instead of an array to allow creating new devices.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[DUMMY]: Use rtnl_link API
Patrick McHardy [Wed, 13 Jun 2007 19:04:34 +0000]
[DUMMY]: Use rtnl_link API

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[DUMMY]: Keep dummy devices on list
Patrick McHardy [Wed, 13 Jun 2007 19:04:20 +0000]
[DUMMY]: Keep dummy devices on list

Use a list instead of an array to allow creating new devices.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[DUMMY]: Use dev->stats
Patrick McHardy [Wed, 13 Jun 2007 19:04:06 +0000]
[DUMMY]: Use dev->stats

Use dev->stats instead of netdev_priv().

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[RTNETLINK]: Link creation API
Patrick McHardy [Wed, 13 Jun 2007 19:03:51 +0000]
[RTNETLINK]: Link creation API

Add rtnetlink API for creating, changing and deleting software devices.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[RTNETLINK]: Split up rtnl_setlink
Patrick McHardy [Wed, 13 Jun 2007 19:03:36 +0000]
[RTNETLINK]: Split up rtnl_setlink

Split up rtnl_setlink into a function performing validation and a function
performing the actual changes. This allows to share the modifcation logic
with rtnl_newlink, which is introduced by the next patch.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NET]: Mark struct net_device * argument to netdev_priv const
Patrick McHardy [Wed, 13 Jun 2007 19:03:21 +0000]
[NET]: Mark struct net_device * argument to netdev_priv const

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[MAC80211]: Add support for SIOCGIWRATE ioctl
Larry Finger [Mon, 11 Jun 2007 00:57:33 +0000]
[MAC80211]: Add support for SIOCGIWRATE ioctl

At present, transmission rate information for mac80211 is available only
if verbose debugging is turned on, and then only in the logs. This patch
implements the SIOCGIWRATE ioctl, which adds the current transmission rate to
the output of iwconfig.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NET]: Kill eth_copy_and_sum().
David S. Miller [Wed, 11 Jul 2007 05:08:12 +0000]
[NET]: Kill eth_copy_and_sum().

It hasn't "summed" anything in over 7 years, and it's
just a straight mempcy ala skb_copy_to_linear_data()
so just get rid of it.

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[TCPv4]: Improve BH latency in /proc/net/tcp
Herbert Xu [Mon, 11 Jun 2007 00:33:08 +0000]
[TCPv4]: Improve BH latency in /proc/net/tcp

Currently the code for /proc/net/tcp disable BH while iterating
over the entire established hash table.  Even though we call
cond_resched_softirq for each entry, we still won't process
softirq's as regularly as we would otherwise do which results
in poor performance when the system is loaded near capacity.

This anomaly comes from the 2.4 code where this was all in a
single function and the local_bh_disable might have made sense
as a small optimisation.

The cost of each local_bh_disable is so small when compared
against the increased latency in keeping it disabled over a
large but mostly empty TCP established hash table that we
should just move it to the individual read_lock/read_unlock
calls as we do in inet_diag.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NET_SCHED]: Cleanup readability of qdisc restart
Jamal Hadi Salim [Mon, 11 Jun 2007 00:31:24 +0000]
[NET_SCHED]: Cleanup readability of qdisc restart

Over the years this code has gotten hairier. Resulting in many long
discussions over long summer days and patches that get it wrong.
This patch helps tame that code so normal people will understand it.

Thanks to Thomas Graf, Peter J. waskiewicz Jr, and Patrick McHardy
for their valuable reviews.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[TIPC]: Optimize stream send routine to avoid fragmentation
Allan Stephens [Mon, 11 Jun 2007 00:25:24 +0000]
[TIPC]: Optimize stream send routine to avoid fragmentation

This patch enhances TIPC's stream socket send routine so that
it avoids transmitting data in chunks that require fragmentation
and reassembly, thereby improving performance at both the
sending and receiving ends of the connection.

The "maximum packet size" hint that records MTU info allows
the socket to decide how big a chunk it should send; in the
event that the hint has become stale, fragmentation may still
occur, but the data will be passed correctly and the hint will
be updated in time for the following send.  Note: The 66060 byte
pseudo-MTU used for intra-node connections requires the send
routine to perform an additional check to ensure it does not
exceed TIPC"s limit of 66000 bytes of user data per chunk.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[TIPC]: Use standard socket "not implemented" routines
Allan Stephens [Mon, 11 Jun 2007 00:24:55 +0000]
[TIPC]: Use standard socket "not implemented" routines

This patch modifies TIPC's socket API to utilize existing
generic routines to indicate unsupported operations, rather
than adding similar TIPC-specific routines.

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[TIPC]: Improved support for Ethernet traffic filtering
Allan Stephens [Mon, 11 Jun 2007 00:24:20 +0000]
[TIPC]: Improved support for Ethernet traffic filtering

This patch simplifies TIPC's Ethernet receive routine to take
advantage of information already present in each incoming sk_buff
indicating whether the packet was explicitly sent to the interface,
has been broadcast to all interfaces, or was picked up because the
interface is in promiscous mode.

This new approach also fixes the problem of TIPC accepting unwanted
traffic through UML's multicast-based Ethernet interfaces (which
deliver traffic in a promiscuous manner even if the interface is
not configured to be promiscuous).

Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Jon Paul Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV4]: The scheduled removal of multipath cached routing support.
David S. Miller [Mon, 11 Jun 2007 00:22:39 +0000]
[IPV4]: The scheduled removal of multipath cached routing support.

With help from Chris Wedgwood.

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agolots-of-architectures: enable arbitary speed tty support
Alan Cox [Wed, 11 Jul 2007 00:22:27 +0000]
lots-of-architectures: enable arbitary speed tty support

Add the termios2 structure ready for enabling on most platforms.  One or
two like Sparc are plain weird so have been left alone.  Most can use the
same structure as ktermios for termios2 (ie the newer ioctl uses the
structure matching the current kernel structure)

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Bryan Wu <bryan.wu@analog.com>
Cc: Ian Molton <spyro@f2s.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <willy@debian.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMake common helpers for seq_files that work with list_heads
Pavel Emelianov [Wed, 11 Jul 2007 00:22:26 +0000]
Make common helpers for seq_files that work with list_heads

Many places in kernel use seq_file API to iterate over a regular list_head.
The code for such iteration is identical in all the places, so it's worth
introducing a common helpers.

This makes code about 300 lines smaller:

The first version of this patch made the helper functions static inline
in the seq_file.h header. This patch moves them to the fs/seq_file.c as
Andrew proposed. The vmlinux .text section sizes are as follows:

2.6.22-rc1-mm1:              0x001794d5
with the previous version:   0x00179505
with this patch:             0x00179135

The config file used was make allnoconfig with the "y" inclusion of all
the possible options to make the files modified by the patch compile plus
drivers I have on the test node.

This patch:

Many places in kernel use seq_file API to iterate over a regular list_head.
The code for such iteration is identical in all the places, so it's worth
introducing a common helpers.

Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosx: switch subven and subid values
Jiri Slaby [Wed, 11 Jul 2007 00:22:25 +0000]
sx: switch subven and subid values

sx.c is failing to locate Graham's card.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Graham Murray <gmurray@webwayone.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoAdd LZO1X algorithm to the kernel
Richard Purdie [Wed, 11 Jul 2007 00:22:24 +0000]
Add LZO1X algorithm to the kernel

This is a hybrid version of the patch to add the LZO1X compression
algorithm to the kernel.  Nitin and myself have merged the best parts of
the various patches to form this version which we're both happy with (and
are jointly signing off).

The performance of this version is equivalent to the original minilzo code
it was based on.  Bytecode comparisons have also been made on ARM, i386 and
x86_64 with favourable results.

There are several users of LZO lined up including jffs2, crypto and reiser4
since its much faster than zlib.

Signed-off-by: Nitin Gupta <nitingupta910@gmail.com>
Signed-off-by: Richard Purdie <rpurdie@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Tue, 10 Jul 2007 21:57:52 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  mmc: at91_mci: fix hanging and rework to match flowcharts
  mmc: at91_mci typo
  sdhci: Fix "Unexpected interrupt" handling
  mmc: fix silly copy-and-paste error
  mmc: move layer init and workqueue to core file
  mmc: refactor host class handling
  mmc: refactor bus operations
  sdhci: add ene controller id
  mmc: bounce requests for simple hosts

12 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 10 Jul 2007 21:56:22 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (40 commits)
  bonding/bond_main.c: make 2 functions static
  ps3: gigabit ethernet driver for PS3, take3
  [netdrvr] Fix dependencies for ax88796 ne2k clone driver
  eHEA: Capability flag for DLPAR support
  Remove sk98lin ethernet driver.
  sunhme.c:quattro_pci_find() must be __devinit
  bonding / ipv6: no addrconf for slaves separately from master
  atl1: remove write-only var in tx handler
  macmace: use "unsigned long flags;"
  Cleanup usbnet_probe() return value handling
  netxen: deinline and sparse fix
  eeprom_93cx6: shorten pulse timing to match spec (bis)
  phylib: Add Marvell 88E1112 phy id
  phylib: cleanup marvell.c a bit
  AX88796 network driver
  IOC3: Switch to pci refcounting safe APIs
  e100: Fix Tyan motherboard e100 not receiving IPMI commands
  QE Ethernet driver writes to wrong register to mask interrupts
  rrunner.c:rr_init() must be __devinit
  tokenring/3c359.c:xl_init() must be __devinit
  ...

12 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 10 Jul 2007 21:50:16 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (32 commits)
  [libata] sata_mv: print out additional chip info during probe
  [libata] Use ATA_UDMAx standard masks when filling driver's udma_mask info
  [libata] AHCI: Add support for Marvell AHCI-like chips (initially 6145)
  [libata] Clean up driver udma_mask initializers
  libata: Support chips with 64K PRD quirk
  Add a PCI ID for santa rosa's PATA controller.
  sata_sil24: sil24_interrupt() micro-optimisation
  Add irq_flags to struct pata_platform_info
  sata_promise: cleanups
  [libata] pata_ixp4xx: kill unused var
  ata_piix: fix pio/mwdma programming
  [libata] ahci: minor internal cleanups
  [ATA] Add named constant for ATAPI command DEVICE RESET
  [libata] sata_sx4, sata_via: minor documentation updates
  [libata] ahci: minor internal cleanups
  [libata] ahci: Factor out SATA port init into a separate function
  [libata] pata_sil680: minor cleanups from benh
  [libata] sata_sx4: named constant cleanup
  [libata] pata_ixp4xx: convert to new EH
  [libata] pdc_adma: Reorder initializers with a couple structs
  ...

12 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 10 Jul 2007 21:48:43 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (62 commits)
  [MIPS] PNX8550: Cleanup proc code.
  [MIPS] WRPPMC: Fix build.
  [MIPS] Yosemite: Fix modpost warnings.
  [MIPS] Change names of local variables to silence sparse
  [MIPS] SB1: Fix modpost warning.
  [MIPS] PNX: Fix modpost warnings.
  [MIPS] Alchemy: Fix modpost warnings.
  [MIPS] Non-FPAFF: Fix warning.
  [MIPS] DEC: Fix modpost warning.
  [MIPS] MIPSsim: Enable MIPSsim virtual network driver.
  [MIPS] Delete Ocelot 3 support.
  [MIPS] remove LASAT Networks platforms support
  [MIPS] Early check for SMTC kernel on non-MT processor
  [MIPS] Add debugfs files to show fpuemu statistics
  [MIPS] Add some debugfs files to debug unaligned accesses
  [MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs
  [MIPS] tc35815: Load MAC address via platform_device
  [MIPS] Move FPU affinity code into separate file.
  [MIPS] Make ioremap() work on TX39/49 special unmapped segment
  [MIPS] rbtx4938: Update and minimize defconfig
  ...

12 years agoMerge git://git.infradead.org/~dwmw2/battery-2.6
Linus Torvalds [Tue, 10 Jul 2007 21:47:59 +0000]
Merge git://git.infradead.org/~dwmw2/battery-2.6

* git://git.infradead.org/~dwmw2/battery-2.6:
  [BATTERY] ds2760 W1 slave
  [BATTERY] One Laptop Per Child power/battery driver
  [BATTERY] Apple PMU driver
  [BATTERY] 1-Wire ds2760 chip battery driver
  [BATTERY] APM emulation driver for class batteries
  [BATTERY] pda_power platform driver
  [BATTERY] Universal power supply class (was: battery class)

12 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Tue, 10 Jul 2007 21:46:09 +0000]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] vmlogrdr function annotation.
  [S390] s390: rename CPU_IDLE to S390_CPU_IDLE
  [S390] cio: Remove prototype for non-existing function cmf_reset().
  [S390] zcrypt: fix request timeout handling
  [S390] system call optimization.
  [S390] dasd: Avoid compile warnings on !CONFIG_DASD_PROFILE
  [S390] Remove volatile from atomic_t
  [S390] Program check in diag 210 under 31 bit
  [S390] Bogomips calculation for 64 bit.
  [S390] smp: Merge smp_count_cpus() and smp_get_save_areas().
  [S390] zcore: Fix __user annotation.
  [S390] fixed cdl-format detection.
  [S390] sclp: Test facility list before executing a service call.
  [S390] sclp: introduce some new interfaces.
  [S390] Fixed comment typo.
  [S390] vmcp cleanup

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Tue, 10 Jul 2007 20:56:13 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw: (57 commits)
  [GFS2] Accept old format NFS filehandles
  [GFS2] Small fixes to logging code
  [DLM] dump more lock values
  [GFS2] Remove i_mode passing from NFS File Handle
  [GFS2] Obtaining no_formal_ino from directory entry
  [GFS2] git-gfs2-nmw-build-fix
  [GFS2] System won't suspend with GFS2 file system mounted
  [GFS2] remounting w/o acl option leaves acls enabled
  [GFS2] inode size inconsistency
  [DLM] Telnet to port 21064 can stop all lockspaces
  [GFS2] Fix gfs2_block_truncate_page err return
  [GFS2] Addendum to the journaled file/unmount patch
  [GFS2] Simplify multiple glock aquisition
  [GFS2] assertion failure after writing to journaled file, umount
  [GFS2] Use zero_user_page() in stuffed_readpage()
  [GFS2] Remove bogus '\0' in rgrp.c
  [GFS2] Journaled file write/unstuff bug
  [DLM] don't require FS flag on all nodes
  [GFS2] Fix deallocation issues
  [GFS2] return conflicts for GETLK
  ...

12 years agoMerge branch 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Tue, 10 Jul 2007 20:51:06 +0000]
Merge branch 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block

* 'splice-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
  pipe: add documentation and comments
  pipe: change the ->pin() operation to ->confirm()
  Remove remnants of sendfile()
  xip sendfile removal
  splice: completely document external interface with kerneldoc
  sendfile: remove bad_sendfile() from bad_file_ops
  shmem: convert to using splice instead of sendfile()
  relay: use splice_to_pipe() instead of open-coding the pipe loop
  pipe: allow passing around of ops private pointer
  splice: divorce the splice structure/function definitions from the pipe header
  splice: relay support
  sendfile: convert nfsd to splice_direct_to_actor()
  sendfile: convert nfs to using splice_read()
  loop: convert to using splice_direct_to_actor() instead of sendfile()
  splice: add void cookie to the actor data
  sendfile: kill generic_file_sendfile()
  sendfile: remove .sendfile from filesystems that use generic_file_sendfile()
  sys_sendfile: switch to using ->splice_read, if available
  vmsplice: add vmsplice-to-user support
  splice: abstract out actor data

12 years agoMerge branch 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Tue, 10 Jul 2007 20:49:46 +0000]
Merge branch 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block

* 'trivial-2.6.23' of git://git.kernel.dk/data/git/linux-2.6-block:
  Documentation/block/barrier.txt is not in sync with the actual code: - blk_queue_ordered() no longer has a gfp_mask parameter - blk_queue_ordered_locked() no longer exists - sd_prepare_flush() looks slightly different
  Use list_for_each_entry() instead of list_for_each() in the block device
  Make a "menuconfig" out of the Kconfig objects "menu, ..., endmenu",
  block/Kconfig already has its own "menuconfig" so remove these
  Use menuconfigs instead of menus, so the whole menu can be disabled at once
  cfq-iosched: fix async queue behaviour
  unexport bio_{,un}map_user
  Remove legacy CDROM drivers
  [PATCH] fix request->cmd == INT cases
  cciss: add new controller support for P700m
  [PATCH] Remove acsi.c
  [BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endio
  [PATCH] cdrom_sysctl_info fix
  blk_hw_contig_segment(): bad segment size checks
  [TRIVIAL PATCH] Kill blk_congestion_wait() stub for !CONFIG_BLOCK

12 years agobonding/bond_main.c: make 2 functions static
Adrian Bunk [Mon, 9 Jul 2007 18:51:12 +0000]
bonding/bond_main.c: make 2 functions static

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Chad Tindel <ctindel@users.sourceforge.net>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agops3: gigabit ethernet driver for PS3, take3
Masakazu Mokuno [Thu, 5 Jul 2007 11:11:16 +0000]
ps3: gigabit ethernet driver for PS3, take3

Hi,

This is the third submission of the network driver for PS3.
The differences from the previous one are:

  - renamed source file names so that their prefix can match
    with the module name
  - added cbe-oss-dev@ozlabs.org line for MAINTAINER file
  - changed some in copyright comments

If there are no more comments, please apply for 2.6.23.

Thank you

--
Subject: PS3: Ethernet driver

From: Masakazu Mokuno <mokuno@sm.sony.co.jp>

Add Gigabit Ethernet support for the PS3 game console.  The module will
be called ps3_gelic.

CC: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[netdrvr] Fix dependencies for ax88796 ne2k clone driver
Jeff Garzik [Tue, 10 Jul 2007 18:06:48 +0000]
[netdrvr] Fix dependencies for ax88796 ne2k clone driver

It needs writesb(), not available on all platforms.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoeHEA: Capability flag for DLPAR support
Jan-Bernd Themann [Thu, 5 Jul 2007 07:26:25 +0000]
eHEA: Capability flag for DLPAR support

This patch introduces a capability flag that is used by the DLPAR userspace
tool to check which DLPAR features are supported by the eHEA driver.

Missing goto has been included.

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoRemove sk98lin ethernet driver.
Jeff Garzik [Tue, 10 Jul 2007 16:58:33 +0000]
Remove sk98lin ethernet driver.

Unmaintained, superceded by skge.

Prodded to deletion by Adrian Bunk.  Acked by Stephen Hemminger.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agosunhme.c:quattro_pci_find() must be __devinit
Adrian Bunk [Tue, 10 Jul 2007 12:44:49 +0000]
sunhme.c:quattro_pci_find() must be __devinit

This patch fixes the following section mismatch:

<--  snip  -->

...
  MODPOST vmlinux
WARNING: drivers/built-in.o(.text+0x272f8b): Section mismatch: reference to .init.text:quattro_pci_find (between 'happy_meal_pci_probe' and 'happy_meal_pci_remove')
...

<--  snip  -->

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agobonding / ipv6: no addrconf for slaves separately from master
Jay Vosburgh [Mon, 9 Jul 2007 17:42:47 +0000]
bonding / ipv6: no addrconf for slaves separately from master

At present, when a device is enslaved to bonding, if ipv6 is
active then addrconf will be initated on the slave (because it is closed
then opened during the enslavement processing).  This causes DAD and RS
packets to be sent from the slave.  These packets in turn can confuse
switches that perform ipv6 snooping, causing them to incorrectly update
their forwarding tables (if, e.g., the slave being added is an inactve
backup that won't be used right away) and direct traffic away from the
active slave to a backup slave (where the incoming packets will be
dropped).

This patch alters the behavior so that addrconf will only run on
the master device itself.  I believe this is logically correct, as it
prevents slaves from having an IPv6 identity independent from the
master.  This is consistent with the IPv4 behavior for bonding.

This is accomplished by (a) having bonding set IFF_SLAVE sooner
in the enslavement processing than currently occurs (before open, not
after), and (b) having ipv6 addrconf ignore UP and CHANGE events on
slave devices.

The eql driver also uses the IFF_SLAVE flag.  I inspected eql,
and I believe this change is reasonable for its usage of IFF_SLAVE, but
I did not test it.

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoatl1: remove write-only var in tx handler
Alexey Dobriyan [Fri, 6 Jul 2007 15:05:25 +0000]
atl1: remove write-only var in tx handler

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agomacmace: use "unsigned long flags;"
Alexey Dobriyan [Fri, 6 Jul 2007 14:57:13 +0000]
macmace: use "unsigned long flags;"

Code will do local_irq_save() on it.

Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoCleanup usbnet_probe() return value handling
Peter Korsgaard [Mon, 2 Jul 2007 22:46:42 +0000]
Cleanup usbnet_probe() return value handling

usbnet_probe() handles a positive return value from the driver bind()
function as success, but will later only setup the status handler if the
return value was zero, leading to confusion. Patch adjusts this to accept
positive values as success in both checks.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agonetxen: deinline and sparse fix
Stephen Hemminger [Thu, 5 Jul 2007 23:13:55 +0000]
netxen: deinline and sparse fix

Get rid of dubious casts to (void *) which causes a sparse warning.
And move largeish function from inline to the one file that uses the code,
the compiler can then decide to inline it.

Compile tested only.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoeeprom_93cx6: shorten pulse timing to match spec (bis)
Francois Romieu [Tue, 3 Jul 2007 22:31:44 +0000]
eeprom_93cx6: shorten pulse timing to match spec (bis)

Based on an original idea by John W. Linville.

It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agophylib: Add Marvell 88E1112 phy id
Olof Johansson [Tue, 3 Jul 2007 21:24:32 +0000]
phylib: Add Marvell 88E1112 phy id

Add 88E1112 PHY ID to the marvell driver. Seems to do fine with the
88E1111 inits.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agophylib: cleanup marvell.c a bit
Olof Johansson [Tue, 3 Jul 2007 21:23:46 +0000]
phylib: cleanup marvell.c a bit

Simplify the marvell driver init a bit: Make the supported devices an
array instead of explicitly registering each structure. This makes it
considerably easier to add new devices down the road.

Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoAX88796 network driver
Ben Dooks [Tue, 3 Jul 2007 15:53:09 +0000]
AX88796 network driver

Support for the Asix AX88796 network controller, an
NE2000 compatible 10/100 ethernet device with internal
PHY.

The driver supports PHY settings via either ioctl() or
the ethtool driver ops.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[MIPS] PNX8550: Cleanup proc code.
Robert P. J. Day [Tue, 10 Jul 2007 10:37:56 +0000]
[MIPS] PNX8550: Cleanup proc code.

Here's a slightly cleaner way of creating the /proc structure for the
pnx8850.  mostly, it creates a directory with default mode 555, since the
one you're creating is mode 444, which is somewhat unusual for a directory
under /proc.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] WRPPMC: Fix build.
Ralf Baechle [Tue, 10 Jul 2007 15:56:33 +0000]
[MIPS] WRPPMC: Fix build.

Using another systems defines is a safe way to get your code broken by
accident when that system is removed.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Yosemite: Fix modpost warnings.
Ralf Baechle [Tue, 10 Jul 2007 15:31:19 +0000]
[MIPS] Yosemite: Fix modpost warnings.

  MODPOST vmlinux
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x974): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x980): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x978): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x984): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x98c): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')
WARNING: arch/mips/pmc-sierra/yosemite/built-in.o(.text+0x990): Section mismatch: reference to .init.data: (between 'prom_boot_secondary' and 'prom_cpus_done')

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Change names of local variables to silence sparse
Atsushi Nemoto [Tue, 10 Jul 2007 15:24:14 +0000]
[MIPS] Change names of local variables to silence sparse

This patch is an workaround for these sparse warnings:

linux/include/linux/calc64.h:25:17: warning: symbol '__quot' shadows an earlier one
linux/include/linux/calc64.h:25:17: originally declared here
linux/include/linux/calc64.h:25:17: warning: symbol '__mod' shadows an earlier one
linux/include/linux/calc64.h:25:17: originally declared here

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] SB1: Fix modpost warning.
Ralf Baechle [Tue, 10 Jul 2007 15:10:56 +0000]
[MIPS] SB1: Fix modpost warning.

  MODPOST vmlinux
WARNING: arch/mips/mm/built-in.o(.text+0x1978): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp')
WARNING: arch/mips/mm/built-in.o(.text+0x1988): Section mismatch: reference to .init.text:except_vec2_sb1 (between 'sb1_cache_init' and 'sb1_flush_cache_sigtramp')

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] PNX: Fix modpost warnings.
Ralf Baechle [Tue, 10 Jul 2007 14:04:06 +0000]
[MIPS] PNX: Fix modpost warnings.

  MODPOST vmlinux
WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd40): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init')
WARNING: arch/mips/philips/pnx8550/common/built-in.o(.text+0xd44): Section mismatch: reference to .init.data: (after 'pnx8550_platform_init')

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Alchemy: Fix modpost warnings.
Ralf Baechle [Tue, 10 Jul 2007 08:35:12 +0000]
[MIPS] Alchemy: Fix modpost warnings.

  MODPOST vmlinux
WARNING: arch/mips/au1000/common/built-in.o(.text+0x1750): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')
WARNING: arch/mips/au1000/common/built-in.o(.text+0x1754): Section mismatch: reference to .init.data: (between 'au1xxx_platform_init' and '__fixup_bigphys_addr')

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Non-FPAFF: Fix warning.
Ralf Baechle [Tue, 10 Jul 2007 07:59:17 +0000]
[MIPS] Non-FPAFF: Fix warning.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] DEC: Fix modpost warning.
Ralf Baechle [Tue, 10 Jul 2007 07:14:15 +0000]
[MIPS] DEC: Fix modpost warning.

  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  MODPOST vmlinux
WARNING: drivers/built-in.o(.data+0x2480): Section mismatch: reference to .init.text: (between 'sercons' and 'ds_parms')

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] MIPSsim: Enable MIPSsim virtual network driver.
Ralf Baechle [Mon, 9 Jul 2007 18:20:20 +0000]
[MIPS] MIPSsim: Enable MIPSsim virtual network driver.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Delete Ocelot 3 support.
Ralf Baechle [Mon, 9 Jul 2007 15:29:16 +0000]
[MIPS] Delete Ocelot 3 support.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] remove LASAT Networks platforms support
Yoichi Yuasa [Mon, 9 Jul 2007 04:10:55 +0000]
[MIPS] remove LASAT Networks platforms support

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Early check for SMTC kernel on non-MT processor
Chris Dearman [Fri, 6 Jul 2007 16:11:20 +0000]
[MIPS] Early check for SMTC kernel on non-MT processor

Signed-off-by: Chris Dearman <chris@mips.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Add debugfs files to show fpuemu statistics
Atsushi Nemoto [Sat, 7 Jul 2007 14:21:49 +0000]
[MIPS] Add debugfs files to show fpuemu statistics

Export contents of struct mips_fpu_emulator_stats via debugfs.

There is no way to read these statistics for now but they (at least
the "emulated" count) might be sometimes useful for performance tuning
on FPU-less CPUs.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Add some debugfs files to debug unaligned accesses
Atsushi Nemoto [Fri, 29 Jun 2007 15:55:48 +0000]
[MIPS] Add some debugfs files to debug unaligned accesses

Currently a number of unaligned instructions is counted but not used.
Add /debug/mips/unaligned_instructions file to show the value.

And add /debug/mips/unaligned_action to control behavior upon an
unaligned access.  Possible actions are:

0: silently fixup the unaligned access.
1: send SIGBUS.
2: dump registers, process name, etc. and fixup.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs
Atsushi Nemoto [Mon, 2 Jul 2007 13:43:06 +0000]
[MIPS] rbtx4938: Fix secondary PCIC and glue internal NICs

* Fix pci ops for secondary PCIC
* Do not reserve 1MB for PCI MEM region (leave PCIBIOS_MIN_MEM zero)
* Use platform_device to provide ethernet addresses for internal NICs.
  (background: TX49XX SoCs include PCI NIC (TC35815 compatible)
  connected via its internal PCI bus, but the NIC's PROM interface is
  not connected to SEEPROM.  So we must provide its ethernet address
  by another way.)
* Check return value of early_read_config_word()

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] tc35815: Load MAC address via platform_device
Atsushi Nemoto [Fri, 29 Jun 2007 13:34:53 +0000]
[MIPS] tc35815: Load MAC address via platform_device

TX49XX SoCs include PCI NIC (TC35815 compatible) connected via its
internal PCI bus, but the NIC's PROM interface is not connected to
SEEPROM.  So we must provide its ethernet address by another way.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Move FPU affinity code into separate file.
Ralf Baechle [Tue, 3 Jul 2007 13:37:43 +0000]
[MIPS] Move FPU affinity code into separate file.

Gets rid of some of the CONFIG_MIPS_MT_FPAFF #ifdefery.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Make ioremap() work on TX39/49 special unmapped segment
Atsushi Nemoto [Mon, 25 Jun 2007 16:14:01 +0000]
[MIPS] Make ioremap() work on TX39/49 special unmapped segment

TX39XX and TX49XX have "reserved" segment in CKSEG3 area.
0xff000000-0xff3fffff on TX49XX and 0xff000000-0xfffeffff on TX39XX
are reserved (unmapped, uncached).  Controllers on these SoCs are
placed in this segment.

This patch add plat_ioremap() and plat_iounmap() to override default
behavior and implement these hooks for TX39/TX49.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] rbtx4938: Update and minimize defconfig
Atsushi Nemoto [Fri, 22 Jun 2007 14:22:29 +0000]
[MIPS] rbtx4938: Update and minimize defconfig

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] rbtx4938: Convert SPI codes to use generic SPI drivers
Atsushi Nemoto [Fri, 22 Jun 2007 14:22:06 +0000]
[MIPS] rbtx4938: Convert SPI codes to use generic SPI drivers

Use rtc-rs5c348 and at25 spi protocol driver and spi_txx9 spi
controller driver instead of platform dependent codes.

This patch also removes dependencies to old RTC interfaces such as
rtc_mips_get_time, etc.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] rbtx4938: Add generic GPIO support
Atsushi Nemoto [Fri, 22 Jun 2007 14:21:55 +0000]
[MIPS] rbtx4938: Add generic GPIO support

GPIO 0..15 are for TX4938 PIO pins, GPIO 16..18 are for FPGA-driven
chipselect signals for SPI devices.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] SNI RM updates
Thomas Bogendoerfer [Wed, 20 Jun 2007 21:36:47 +0000]
[MIPS] SNI RM updates

- use RTC_CLASS instead of GEN_RTC
- get rid of ds1216 in favour of a RTC_CLASS driver
- use correct console device for older RM400
- use physical addresses for 82596 device
- use 128 byte L1 cache line size (this is needed because most of the
  SNI caches are using 128 L2 cache lines)

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>