10 years agocrypto: null - Switch to shash
Herbert Xu [Sat, 8 Nov 2008 00:09:56 +0000]
crypto: null - Switch to shash

This patch changes digest_null to the new shash interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hash - Make setkey optional
Herbert Xu [Sat, 8 Nov 2008 00:56:57 +0000]
crypto: hash - Make setkey optional

Since most cryptographic hash algorithms have no keys, this patch
makes the setkey function optional for ahash and shash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: testmgr - Validate output length in (de)compression tests
Geert Uytterhoeven [Fri, 28 Nov 2008 12:51:28 +0000]
crypto: testmgr - Validate output length in (de)compression tests

When self-testing (de)compression algorithms, make sure the actual size of
the (de)compressed output data matches the expected output size.
Otherwise, in case the actual output size would be smaller than the expected
output size, the subsequent buffer compare test would still succeed, and no
error would be reported.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: remove uses of __constant_{endian} helpers
Harvey Harrison [Fri, 28 Nov 2008 12:49:19 +0000]
crypto: remove uses of __constant_{endian} helpers

Base versions handle constant folding just fine.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: testmgr - Fix error flow of test_comp
Ingo Molnar [Tue, 25 Nov 2008 15:19:24 +0000]
crypto: testmgr - Fix error flow of test_comp

This warning:

  crypto/testmgr.c: In function ‘test_comp’:
  crypto/testmgr.c:829: warning: ‘ret’ may be used uninitialized in this function

triggers because GCC correctly notices that in the ctcount == 0 &&
dtcount != 0 input condition case this function can return an undefined
value, if the second loop fails.

Remove the shadowed 'ret' variable from the second loop that was probably

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hifn_795x - Use softirq kernel mapping in bh context
Evgeniy Polyakov [Tue, 25 Nov 2008 15:17:10 +0000]
crypto: hifn_795x - Use softirq kernel mapping in bh context

Use KM_SOFTIRQ instead of KM_IRQ in tasklet context.
Added bug_on on input no-page condition.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hifn_795x - Fix queue management
Evgeniy Polyakov [Mon, 24 Nov 2008 14:04:39 +0000]
crypto: hifn_795x - Fix queue management

Fix queue management. Change ring size and perform its check not
one after another descriptor, but using stored pointers to the last
checked descriptors.

Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hifn_795x - Remove some unused cruft
Patrick McHardy [Mon, 24 Nov 2008 14:03:37 +0000]
crypto: hifn_795x - Remove some unused cruft

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hifn_795x - Fix queue processing
Patrick McHardy [Mon, 24 Nov 2008 14:02:55 +0000]
crypto: hifn_795x - Fix queue processing

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hifn_795x - Fix request context corruption
Patrick McHardy [Mon, 24 Nov 2008 14:01:42 +0000]
crypto: hifn_795x - Fix request context corruption

HIFN uses the transform context to store per-request data, which breaks
when more than one request is outstanding. Move per request members from
struct hifn_context to a new struct hifn_request_context and convert
the code to use this.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hifn_795x - Don't copy src sg list
Patrick McHardy [Mon, 24 Nov 2008 14:00:49 +0000]
crypto: hifn_795x - Don't copy src sg list

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hifn_795x - Fix DMA setup
Patrick McHardy [Mon, 24 Nov 2008 13:59:25 +0000]
crypto: hifn_795x - Fix DMA setup

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: ansi_cprng - fix inverted DT increment routine
Jarod Wilson [Mon, 24 Nov 2008 13:20:13 +0000]
crypto: ansi_cprng - fix inverted DT increment routine

The ANSI X9.31 PRNG docs aren't particularly clear on how to increment DT,
but empirical testing shows we're incrementing from the wrong end. A 10,000
iteration Monte Carlo RNG test currently winds up not getting the expected

From http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf :

# CAVS 4.3
[AES 128-Key]

Key = 9f5b51200bf334b5d82be8c37255c848
DT = 6376bbe52902ba3b67c925fa701f11ac
V = 572c8e76872647977e74fbddc49501d1
R = 48e9bd0d06ee18fbe45790d5c3fc9b73

Currently, we get 0dd08496c4f7178bfa70a2161a79459a after 10000 loops.

Inverting the DT increment routine results in us obtaining the expected result
of 48e9bd0d06ee18fbe45790d5c3fc9b73. Verified on both x86_64 and ppc64.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agolibcrc32c: Select CRYPTO in Kconfig
Herbert Xu [Thu, 13 Nov 2008 14:05:13 +0000]
libcrc32c: Select CRYPTO in Kconfig

Selecting CRYPTO_CRC32C is not enough as CRYPTO which CRYPTO_CRC32C
depends on may be disabled.  This patch adds the select on CRYPTO.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: ansi_cprng - Avoid incorrect extra call to _get_more_prng_bytes
Jarod Wilson [Thu, 13 Nov 2008 14:03:20 +0000]
crypto: ansi_cprng - Avoid incorrect extra call to _get_more_prng_bytes

While working with some FIPS RNGVS test vectors yesterday, I discovered a
little bug in the way the ansi_cprng code works right now.

For example, the following test vector (complete with expected result)
from http://csrc.nist.gov/groups/STM/cavp/documents/rng/RNGVS.pdf ...

Key = f3b1666d13607242ed061cabb8d46202
DT = e6b3be782a23fa62d71d4afbb0e922fc
V = f0000000000000000000000000000000
R = 88dda456302423e5f69da57e7b95c73a

...when run through ansi_cprng, yields an incorrect R value
of e2afe0d794120103d6e86a2b503bdfaa.

If I load up ansi_cprng w/dbg=1 though, it was fairly obvious what was
going wrong:

getting 16 random bytes for context ffff810033fb2b10
Calling _get_more_prng_bytes for context ffff810033fb2b10
Input DT: 00000000: e6 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc
Input I: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Input V: 00000000: f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
tmp stage 0: 00000000: e6 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc
tmp stage 1: 00000000: f4 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84
tmp stage 2: 00000000: 8c 53 6f 73 a4 1a af d4 20 89 68 f4 58 64 f8 be
Returning new block for context ffff810033fb2b10
Output DT: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc
Output I: 00000000: 04 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84
Output V: 00000000: 48 89 3b 71 bc e4 00 b6 5e 21 ba 37 8a 0a d5 70
New Random Data: 00000000: 88 dd a4 56 30 24 23 e5 f6 9d a5 7e 7b 95 c7 3a
Calling _get_more_prng_bytes for context ffff810033fb2b10
Input DT: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc
Input I: 00000000: 04 8e cb 25 94 3e 8c 31 d6 14 cd 8a 23 f1 3f 84
Input V: 00000000: 48 89 3b 71 bc e4 00 b6 5e 21 ba 37 8a 0a d5 70
tmp stage 0: 00000000: e7 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc
tmp stage 1: 00000000: 80 6b 3a 8c 23 ae 8f 53 be 71 4c 16 fc 13 b2 ea
tmp stage 2: 00000000: 2a 4d e1 2a 0b 58 8e e6 36 b8 9c 0a 26 22 b8 30
Returning new block for context ffff810033fb2b10
Output DT: 00000000: e8 b3 be 78 2a 23 fa 62 d7 1d 4a fb b0 e9 22 fc
Output I: 00000000: c8 e2 01 fd 9f 4a 8f e5 e0 50 f6 21 76 19 67 9a
Output V: 00000000: ba 98 e3 75 c0 1b 81 8d 03 d6 f8 e2 0c c6 54 4b
New Random Data: 00000000: e2 af e0 d7 94 12 01 03 d6 e8 6a 2b 50 3b df aa
returning 16 from get_prng_bytes in context ffff810033fb2b10

The expected result is there, in the first "New Random Data", but we're
incorrectly making a second call to _get_more_prng_bytes, due to some checks
that are slightly off, which resulted in our original bytes never being
returned anywhere.

One approach to fixing this would be to alter some byte_count checks in
get_prng_bytes, but it would mean the last DEFAULT_BLK_SZ bytes would be
copied a byte at a time, rather than in a single memcpy, so a slightly more
involved, equally functional, and ultimately more efficient way of fixing this
was suggested to me by Neil, which I'm submitting here. All of the RNGVS ANSI
X9.31 AES128 VST test vectors I've passed through ansi_cprng are now returning
the expected results with this change.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: md4 - Use ARRAY_SIZE
Julia Lawall [Thu, 13 Nov 2008 13:19:04 +0000]
crypto: md4 - Use ARRAY_SIZE

ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:

// <smpl>

#include <linux/kernel.h>

@depends on i using "paren.iso"@
type T;
T[] E;

- (sizeof(E)/sizeof(T))
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agolibcrc32c: Add crc32c_le macro
Herbert Xu [Tue, 11 Nov 2008 04:20:06 +0000]
libcrc32c: Add crc32c_le macro

The bnx2x driver actually uses the crc32c_le name so this patch
restores the crc32c_le symbol through a macro.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agolibcrc32c: Fix "crc32c undefined" compilation error
Adrian-Ken Rueegsegger [Tue, 11 Nov 2008 04:14:00 +0000]
libcrc32c: Fix "crc32c undefined" compilation error

The latest shash changes leave crc32c undefined:

Building modules, stage 2.
  MODPOST 1381 modules
  ERROR: "crc32c" [net/sctp/sctp.ko] undefined!
  ERROR: "crc32c" [net/ipv4/netfilter/nf_nat_proto_sctp.ko] undefined!

Adding EXPORT_SYMBOL(crc32c) to lib/libcrc32c.c fixes the compile error.
This patch has been compile-tested only.

Signed-off-by: Adrian-Ken Rueegsegger <rueegsegger@swiss-it.ch>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agolibcrc32c: Move implementation to crypto crc32c
Herbert Xu [Fri, 7 Nov 2008 07:11:47 +0000]
libcrc32c: Move implementation to crypto crc32c

This patch swaps the role of libcrc32c and crc32c.  Previously
the implementation was in libcrc32c and crc32c was a wrapper.
Now the code is in crc32c and libcrc32c just calls the crypto

The reason for the change is to tap into the algorithm selection
capability of the crypto API so that optimised implementations
such as the one utilising Intel's CRC32C instruction can be
used where available.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: crc32c - Test descriptor context format
Herbert Xu [Fri, 7 Nov 2008 06:58:52 +0000]
crypto: crc32c - Test descriptor context format

This patch adds a test for the requirement that all crc32c algorithms
shall store the partial result in the first four bytes of the descriptor

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: crc32c-intel - Switch to shash
Herbert Xu [Thu, 6 Nov 2008 08:56:41 +0000]
crypto: crc32c-intel - Switch to shash

This patch changes crc32c-intel to the new shash interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: crc32c - Switch to shash
Herbert Xu [Tue, 9 Sep 2008 07:23:07 +0000]
crypto: crc32c - Switch to shash

This patch changes crc32c to the new shash interface.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hash - Export shash through hash
Herbert Xu [Sun, 31 Aug 2008 12:21:09 +0000]
crypto: hash - Export shash through hash

This patch allows shash algorithms to be used through the old hash
interface.  This is a transitional measure so we can convert the
underlying algorithms to shash before converting the users across.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: api - Call type show function before legacy for proc
Herbert Xu [Thu, 6 Nov 2008 06:39:16 +0000]
crypto: api - Call type show function before legacy for proc

This patch makes /proc/crypto call the type-specific show function
if one is present before calling the legacy show functions for
cipher/digest/compress.  This allows us to reuse the type values
for those legacy types.  In particular, hash and digest will share
one type value while shash is phased in as the default hash type.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hash - Add import/export interface
Herbert Xu [Sun, 2 Nov 2008 13:38:11 +0000]
crypto: hash - Add import/export interface

It is often useful to save the partial state of a hash function
so that it can be used as a base for two or more computations.

The most prominent example is HMAC where all hashes start from
a base determined by the key.  Having an import/export interface
means that we only have to compute that base once rather than
for each message.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hash - Export shash through ahash
Herbert Xu [Sun, 31 Aug 2008 08:52:18 +0000]
crypto: hash - Export shash through ahash

This patch allows shash algorithms to be used through the ahash
interface.  This is required before we can convert digest algorithms
over to shash.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hash - Add shash interface
Herbert Xu [Sun, 31 Aug 2008 05:47:27 +0000]
crypto: hash - Add shash interface

The shash interface replaces the current synchronous hash interface.
It improves over hash in two ways.  Firstly shash is reentrant,
meaning that the same tfm may be used by two threads simultaneously
as all hashing state is stored in a local descriptor.

The other enhancement is that shash no longer takes scatter list
entries.  This is because shash is specifically designed for
synchronous algorithms and as such scatter lists are unnecessary.

All existing hash users will be converted to shash once the
algorithms have been completely converted.

There is also a new finup function that combines update with final.
This will be extended to ahash once the algorithm conversion is

This is also the first time that an algorithm type has their own
registration function.  Existing algorithm types will be converted
to this way in due course.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: api - Rebirth of crypto_alloc_tfm
Herbert Xu [Sat, 20 Sep 2008 21:52:53 +0000]
crypto: api - Rebirth of crypto_alloc_tfm

This patch reintroduces a completely revamped crypto_alloc_tfm.
The biggest change is that we now take two crypto_type objects
when allocating a tfm, a frontend and a backend.  In fact this
simply formalises what we've been doing behind the API's back.

For example, as it stands crypto_alloc_ahash may use an
actual ahash algorithm or a crypto_hash algorithm.  Putting
this in the API allows us to do this much more cleanly.

The existing types will be converted across gradually.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: api - Move type exit function into crypto_tfm
Herbert Xu [Sun, 14 Sep 2008 01:19:03 +0000]
crypto: api - Move type exit function into crypto_tfm

The type exit function needs to undo any allocations done by the type
init function.  However, the type init function may differ depending
on the upper-level type of the transform (e.g., a crypto_blkcipher
instantiated as a crypto_ablkcipher).

So we need to move the exit function out of the lower-level
structure and into crypto_tfm itself.

As it stands this is a no-op since nobody uses exit functions at
all.  However, all cases where a lower-level type is instantiated
as a different upper-level type (such as blkcipher as ablkcipher)
will be converted such that they allocate the underlying transform
and use that instead of casting (e.g., crypto_ablkcipher casted
into crypto_blkcipher).  That will need to use a different exit
function depending on the upper-level type.

This patch also allows the type init/exit functions to call (or not)
cra_init/cra_exit instead of always calling them from the top level.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: ansi_cprng - Allow resetting of DT value
Neil Horman [Wed, 5 Nov 2008 04:13:14 +0000]
crypto: ansi_cprng - Allow resetting of DT value

This is a patch that was sent to me by Jarod Wilson, marking off my
outstanding todo to allow the ansi cprng to set/reset the DT counter value in a
cprng instance.  Currently crytpo_rng_reset accepts a seed byte array which is
interpreted by the ansi_cprng as a {V key} tuple.  This patch extends that tuple
to now be {V key DT}, with DT an optional value during reset.  This patch also
fixes  a bug we noticed in which the offset of the key area of the seed is
started at DEFAULT_PRNG_KSZ rather than DEFAULT_BLK_SZ as it should be.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: padlock - Avoid resetting cword on successive operations
Herbert Xu [Sun, 31 Aug 2008 05:58:45 +0000]
crypto: padlock - Avoid resetting cword on successive operations

Resetting the control word is quite expensive.  Fortunately this
isn't an issue for the common operations such as CBC and ECB as
the whole operation is done through a single call.  However, modes
such as LRW and XTS have to call padlock over and over again for
one operation which really hurts if each call resets the control

This patch uses an idea by Sebastian Siewior to store the last
control word used on a CPU and only reset the control word if
that changes.

Note that any task switch automatically resets the control word
so we only need to be accurate with regard to the stored control
word when no task switches occur.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: crc32c-intel - Update copyright head
Kent Liu [Fri, 31 Oct 2008 08:52:58 +0000]
crypto: crc32c-intel - Update copyright head

The original copyright head for crc32c-intel.c is incorrect. Please merge
the patch to update it.

Signed-Off-By: Kent Liu <kent.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: talitos - Preempt overflow interrupts off-by-one fix
Vishnu Suresh [Mon, 20 Oct 2008 13:06:18 +0000]
crypto: talitos - Preempt overflow interrupts off-by-one fix

In commit ec6644d6325b5a38525f1d5b20fd4bf7db05cf2a "crypto: talitos - Preempt
overflow interrupts", the test in atomic_inc_not_zero was interpreted by the
author to be applied after the increment operation (not before). This off-by-one
fix prevents overflow error interrupts from occurring when requests are frequent
and large enough to do so.

Signed-off-by: Vishnu Suresh <Vishnu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: camellia - use kernel-provided bitops, unaligned access
Harvey Harrison [Sun, 12 Oct 2008 12:40:12 +0000]
crypto: camellia - use kernel-provided bitops, unaligned access

Remove the private implementation of 32-bit rotation and unaligned
access with byteswapping.

As a bonus, fixes sparse warnings:
crypto/camellia.c:602:2: warning: cast to restricted __be32
crypto/camellia.c:603:2: warning: cast to restricted __be32
crypto/camellia.c:604:2: warning: cast to restricted __be32
crypto/camellia.c:605:2: warning: cast to restricted __be32
crypto/camellia.c:710:2: warning: cast to restricted __be32
crypto/camellia.c:711:2: warning: cast to restricted __be32
crypto/camellia.c:712:2: warning: cast to restricted __be32
crypto/camellia.c:713:2: warning: cast to restricted __be32
crypto/camellia.c:714:2: warning: cast to restricted __be32
crypto/camellia.c:715:2: warning: cast to restricted __be32
crypto/camellia.c:716:2: warning: cast to restricted __be32
crypto/camellia.c:717:2: warning: cast to restricted __be32

[Thanks to Tomoyuki Okazaki for spotting the typo]
Tested-by: Carlo E. Prelz <fluido@fluido.as>
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: testmgr - Trigger a panic when self test fails in FIPS mode
Neil Horman [Sun, 12 Oct 2008 12:36:51 +0000]
crypto: testmgr - Trigger a panic when self test fails in FIPS mode

The FIPS specification requires that should self test for any supported
crypto algorithm fail during operation in fips mode, we need to prevent
the use of any crypto functionality until such time as the system can
be re-initialized.  Seems like the best way to handle that would be
to panic the system if we were in fips mode and failed a self test.
This patch implements that functionality.  I've built and run it

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: talitos - Perform auth check in h/w if on sec 2.1 and above
Kim Phillips [Sun, 12 Oct 2008 12:33:14 +0000]
crypto: talitos - Perform auth check in h/w if on sec 2.1 and above

SEC version 2.1 and above adds the capability to do the IPSec ICV
memcmp in h/w. Results of the cmp are written back in the descriptor
header, along with the done status.  A new callback is added that
checks these ICCR bits instead of performing the memcmp on the core,
and is enabled by h/w capability.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

After testing on different parts, another condition was added
before using h/w auth check because different
SEC revisions require different handling.

The SEC 3.0 allows a more flexible link table where
the auth data can span separate link table entries.
The SEC 2.4/2.1 does not support this case.
So a test was added in the decrypt routine
for a fragmented case; the h/w auth check is disallowed for
revisions not having the extent in the link table;
in this case the hw auth check is done by software.

A portion of a previous change for SEC 3.0 link table handling
was removed since it became dead code with the hw auth check supported.

This seems to be the best compromise for using hw auth check
on supporting SEC revisions; it keeps the link table logic
simpler for the fragmented cases.

Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: talitos - Implement done interrupt mitigation
Lee Nipper [Sun, 12 Oct 2008 12:29:34 +0000]
crypto: talitos - Implement done interrupt mitigation

In talitos_interrupt, upon one done interrupt, mask further done interrupts,
and ack only any error interrupt.
In talitos_done, unmask done interrupts after completing processing.
In flush_channel, ack each done channel processed.
Keep done overflow interrupts masked because even though each pkt
is ack'ed, a few done overflows still occur.

Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: talitos - Pass correct interrupt status to error handler
Kim Phillips [Sun, 12 Oct 2008 12:19:35 +0000]
crypto: talitos - Pass correct interrupt status to error handler

Since we ack early, the re-read interrupt status in talitos_error
may be already updated with a new value.  Pass the error ISR value
directly in order to report and handle the error based on the correct
error status.

Also remove unused error tasklet.

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agocrypto: hifn - Disable driver when physical size exceeds 32 bits
Evgeniy Polyakov [Sun, 12 Oct 2008 12:14:15 +0000]
crypto: hifn - Disable driver when physical size exceeds 32 bits

On Tue, Sep 23, 2008 at 08:06:32PM +0200, Dimitri Puzin (max@psycast.de) wrote:
> With this patch applied it still doesn't work as expected. The overflow
> messages are gone however syslog shows
> [  120.924266] hifn0: abort: c: 0, s: 1, d: 0, r: 0.
> when doing cryptsetup luksFormat as in original e-mail. At this point
> cryptsetup hangs and can't be killed with -SIGKILL. I've attached
> SysRq-t dump of this condition.

Yes, I was wrong with the patch: HIFN does not support 64-bit addresses

Attached patch should not allow HIFN to be registered on 64-bit arch, so
crypto layer will fallback to the software algorithms.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

10 years agoLinux 2.6.28
Linus Torvalds [Wed, 24 Dec 2008 23:26:37 +0000]
Linux 2.6.28

Happy holidays..

10 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Wed, 24 Dec 2008 18:24:52 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command
  V4L/DVB (9908a): MAINTAINERS: mark linux-uvc-devel as subscribers only
  V4L/DVB (9906): v4l2-compat: test for unlocked_ioctl as well.
  V4L/DVB (9885): drivers/media Kconfig's: fix bugzilla #12204
  V4L/DVB (9875): gspca - main: Fix vidioc_s_jpegcomp locking.
  V4L/DVB (9781): [PATCH] Cablestar 2 I2C retries (fix CableStar2 support)
  V4L/DVB (9780): dib0700: Stop repeating after user stops pushing button

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Wed, 24 Dec 2008 18:24:14 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: disable X86_PTRACE_BTS

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Wed, 24 Dec 2008 18:23:21 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add missing terminators in patch_sigmatel.c

10 years agoALSA: hda - Add missing terminators in patch_sigmatel.c
Herton Ronaldo Krzesinski [Tue, 23 Dec 2008 18:53:00 +0000]
ALSA: hda - Add missing terminators in patch_sigmatel.c

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agox86: disable X86_PTRACE_BTS
Ingo Molnar [Wed, 24 Dec 2008 09:49:51 +0000]
x86: disable X86_PTRACE_BTS

there's a new ptrace arch level feature in .28:

  config X86_PTRACE_BTS
  bool "Branch Trace Store"

it has broken fork() handling: the old DS area gets copied over into
a new task without clearing it.

Fixes exist but they came too late:

  c5dee61: x86, bts: memory accounting
  bf53de9: x86, bts: add fork and exit handling

and are queued up for v2.6.29. This shows that the facility is still not
tested well enough to release into a stable kernel - disable it for now and
reactivate in .29. In .29 the hardware-branch-tracer will use the DS/BTS
facilities too - hopefully resulting in better code.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoparisc: disable UP-optimized flush_tlb_mm
Kyle McMartin [Tue, 23 Dec 2008 13:44:30 +0000]
parisc: disable UP-optimized flush_tlb_mm

flush_tlb_mm's "optimized" uniprocessor case of allocating a new
context for userspace is exposing a race where we can suddely return
to a syscall with the protection id and space id out of sync, trapping
on the next userspace access.

Debugged-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 24 Dec 2008 01:01:40 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: fix correctness of irq_enabled check for radeon.

10 years agoedac: fix edac core deadlock when removing a device
Harry Ciao [Tue, 23 Dec 2008 21:57:16 +0000]
edac: fix edac core deadlock when removing a device

When deleting an edac device, we have to wait for its edac_dev.work to be
completed before deleting the whole edac_dev structure.  Since we have no
idea which work in current edac_poller's workqueue is the work we are
conerned about, we wait for all work in the edac_poller's workqueue to be
proceseed.  This is done via flush_cpu_workqueue() which inserts a
wq_barrier into the tail of the workqueue and then sleeping on the
completion of this wq_barrier.  The edac_poller will wake up sleepers when
it is found.

EDAC core creates only one kernel worker thread, edac_poller, to run the
works of all current edac devices.  They share the same callback function
of edac_device_workq_function(), which would grab the mutex of
device_ctls_mutex first before it checks the device.  This is exactly
where edac_poller and rmmod would have a great chance to deadlock.

In below call trace of rmmod > ... >
edac_device_del_device >
edac_device_workq_teardown > flush_workqueue > flush_cpu_workqueue,

device_ctls_mutex would have already been grabbed by
edac_device_del_device().  So, on one hand rmmod would sleep on the
completion of a wq_barrier, holding device_ctls_mutex; on the other hand
edac_poller would be blocked on the same mutex when it's running any one
of works of existing edac evices(Note, this edac_dev.work is likely to be
totally irrelevant to the one that is being removed right now)and never
would have a chance to run the work of above wq_barrier to wake rmmod up.

edac_device_workq_teardown() should not be called within the critical
region of device_ctls_mutex.  Just like is done in edac_pci_del_device()
and edac_mc_del_mc(), where edac_pci_workq_teardown() and
edac_mc_workq_teardown() are called after related mutex are released.

Moreover, an edac_dev.work should check first if it is being removed.  If
this is the case, then it should bail out immediately.  Since not all of
existing edac devices are to be removed, this "shutting flag" should be
contained to edac device being removed.  The current edac_dev.op_state can
be used to serve this purpose.

The original deadlock problem and the solution have been witnessed and
tested on actual hardware.  Without the solution, rmmod an edac driver
would result in below deadlock:

root@localhost:/root> rmmod mv64x60_edac
EDAC DEBUG: mv64x60_dma_err_remove()
EDAC DEBUG: edac_device_del_device()
EDAC DEBUG: find_edac_device_by_dev()

(hang for a moment)

INFO: task edac-poller:2030 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
edac-poller   D 00000000     0  2030      2
Call Trace:
[df159dc0] [c0071e3c] free_hot_cold_page+0x17c/0x304 (unreliable)
[df159e80] [c000a024] __switch_to+0x6c/0xa0
[df159ea0] [c03587d8] schedule+0x2f4/0x4d8
[df159f00] [c03598a8] __mutex_lock_slowpath+0xa0/0x174
[df159f40] [e1030434] edac_device_workq_function+0x28/0xd8 [edac_core]
[df159f60] [c003beb4] run_workqueue+0x114/0x218
[df159f90] [c003c674] worker_thread+0x5c/0xc8
[df159fd0] [c004106c] kthread+0x5c/0xa0
[df159ff0] [c0013538] original_kernel_thread+0x44/0x60
INFO: task rmmod:2062 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
rmmod         D 0ff2c9fc     0  2062   1839
Call Trace:
[df119c00] [c0437a74] 0xc0437a74 (unreliable)
[df119cc0] [c000a024] __switch_to+0x6c/0xa0
[df119ce0] [c03587d8] schedule+0x2f4/0x4d8
[df119d40] [c03591dc] schedule_timeout+0xb0/0xf4

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocgroups: avoid accessing uninitialized data in failure path
Li Zefan [Tue, 23 Dec 2008 21:57:14 +0000]
cgroups: avoid accessing uninitialized data in failure path

If cgroup_get_rootdir() failed, free_cg_links() will be called in the
failure path, but tmp_cg_links hasn't been initialized at that time.

I introduced this bug in the 2.6.27 merge window.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agocgroups: suppress bogus warning messages
Sharyathi Nagesh [Tue, 23 Dec 2008 21:57:12 +0000]
cgroups: suppress bogus warning messages

Remove spurious warning messages that are thrown onto the console during
cgroup operations.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Sharyathi Nagesh <sharyathi@in.ibm.com>
Acked-by: Serge E. Hallyn <serge@hallyn.com>
Cc: Paul Menage <menage@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agow1: fix slave selection on big-endian systems
Evgeniy Polyakov [Tue, 23 Dec 2008 21:57:12 +0000]
w1: fix slave selection on big-endian systems

During test of the w1-gpio driver i found that in "w1.c:679
w1_slave_found()" the device id is converted to little-endian with
"cpu_to_le64()", but its not converted back to cpu format in "w1_io.c:293

Based on a patch created by Andreas Hummel.

[akpm@linux-foundation.org: remove unneeded cast]
Reported-by: Andreas Hummel <andi_hummel@gmx.de>
Signed-off-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agortc: rtc-isl1208: reject invalid dates
Chris Elston [Tue, 23 Dec 2008 21:57:10 +0000]
rtc: rtc-isl1208: reject invalid dates

This patch for the rtc-isl1208 driver makes it reject invalid dates.

Signed-off-by: Chris Elston <celston@katalix.com>
[a.zummo@towertech.it: added comment explaining the check]
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Hebert Valerio Riedel <hvr@gnu.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoV4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET...
Devin Heitmueller [Wed, 17 Dec 2008 02:09:35 +0000]
V4L/DVB (9920): em28xx: fix NULL pointer dereference in call to VIDIOC_INT_RESET command

Fix a NULL pointer dereference that would occur if the video decoder tied to
the em28xx supports the VIDIOC_INT_RESET call (for example: the cx25840 driver)

Signed-off-by: Devin Heitmueller <dheitmueller@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agodrm/radeon: fix correctness of irq_enabled check for radeon.
Dave Airlie [Mon, 22 Dec 2008 07:11:02 +0000]
drm/radeon: fix correctness of irq_enabled check for radeon.

This check was introduced with the logic the wrong way around.

Fixes regression: http://bugzilla.kernel.org/show_bug.cgi?id=12216

Tested-by: François Valenduc <francois.valenduc@tvcablenet.be>
Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Mon, 22 Dec 2008 22:52:00 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: don't cond_resched() when irqs_disabled()
  ACPI: fix 2.6.28 acpi.debug_level regression

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Mon, 22 Dec 2008 22:40:48 +0000]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test

10 years agodrivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test
Julia Lawall [Mon, 22 Dec 2008 22:05:06 +0000]
drivers/ide/{cs5530.c,sc1200.c}: Move a dereference below a NULL test

In each case, if the NULL test is necessary, then the dereference should be
moved below the NULL test.

The semantic patch that makes this change is as follows:

// <smpl>
type T;
expression E;
identifier i,fld;
statement S;

- T i = E->fld;
+ T i;
  ... when != E
      when != i
  if (E == NULL) S
+ i = E->fld;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

10 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Mon, 22 Dec 2008 18:17:19 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: MIPS64R2: Fix buggy __arch_swab64
  MIPS: Fix preprocessor warnings flaged by GCC 4.4

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 22 Dec 2008 18:12:54 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ppp: fix segfaults introduced by netdev_priv changes
  net: Fix module refcount leak in kernel_accept()

10 years agoMIPS: MIPS64R2: Fix buggy __arch_swab64
David Daney [Wed, 17 Dec 2008 21:28:39 +0000]
MIPS: MIPS64R2: Fix buggy __arch_swab64

The way the code is written it was assuming dshd has the function of a
hypothetical dshw instruction ...

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoMIPS: Fix preprocessor warnings flaged by GCC 4.4
David Daney [Thu, 18 Dec 2008 02:19:18 +0000]
MIPS: Fix preprocessor warnings flaged by GCC 4.4

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

10 years agoNull pointer deref with hrtimer_try_to_cancel()
Thomas Gleixner [Sat, 20 Dec 2008 20:27:34 +0000]
Null pointer deref with hrtimer_try_to_cancel()

Impact: Prevent kernel crash with posix timer clockid CLOCK_MONOTONIC_RAW

commit 2d42244ae71d6c7b0884b5664cf2eda30fb2ae68 (clocksource:
introduce CLOCK_MONOTONIC_RAW) introduced a new clockid, which is only
available to read out the raw not NTP adjusted system time.

The above commit did not prevent that a posix timer can be created
with that clockid. The timer_create() syscall succeeds and initializes
the timer to a non existing hrtimer base. When the timer is deleted
either by timer_delete() or by the exit() cleanup the kernel crashes.

Prevent the creation of timers for CLOCK_MONOTONIC_RAW by setting the
posix clock function to no_timer_create which returns an error code.

Reported-and-tested-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh...
Linus Torvalds [Sat, 20 Dec 2008 19:07:31 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: change simple_strtol to simple_strtoul
  9p: convert d_iname references to d_name.name
  9p: Remove potentially bad parameter from function entry debug print.

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 20 Dec 2008 19:07:18 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: fix resume (S2R) broken by Intel microcode module, on A110L
  x86 gart: don't complain if no AMD GART found
  AMD IOMMU: panic if completion wait loop fails
  AMD IOMMU: set cmd buffer pointers to zero manually
  x86: re-enable MCE on secondary CPUS after suspend/resume
  AMD IOMMU: allocate rlookup_table with __GFP_ZERO

10 years agox86: fix resume (S2R) broken by Intel microcode module, on A110L
Dmitry Adamushko [Fri, 19 Dec 2008 23:15:24 +0000]
x86: fix resume (S2R) broken by Intel microcode module, on A110L

Impact: fix deadlock

This is in response to the following bug report:

Bug-Entry       : http://bugzilla.kernel.org/show_bug.cgi?id=12100
Subject         : resume (S2R) broken by Intel microcode module, on A110L
Submitter       : Andreas Mohr <andi@lisas.de>
Date            : 2008-11-25 08:48 (19 days old)
Handled-By      : Dmitry Adamushko <dmitry.adamushko@gmail.com>

[ The deadlock scenario has been discovered by Andreas Mohr ]

I think I might have a logical explanation why the system:


might hang upon resuming, OTOH it should have likely hanged each and every time.

(1) possible deadlock in microcode_resume_cpu() if either 'if' section is

(2) now, I don't see it in spec. and can't experimentally verify it (newer
ucodes don't seem to be available for my Core2duo)... but logically-wise, I'd
think that when read upon resuming, the 'microcode revision' (MSR 0x8B) should
be back to its original one (we need to reload ucode anyway so it doesn't seem
logical if a cpu doesn't drop the version)... if so, the comparison with
memcmp() for the full 'struct cpu_signature' is wrong... and that's how one of
the aforementioned 'if' sections might have been triggered - leading to a

Obviously, in my tests I simulated loading/resuming with the ucode of the same
version (just to see that the file is loaded/re-loaded upon resuming) so this
issue has never popped up.

I'd appreciate if someone with an appropriate system might give a try to the
2nd patch (titled "fix a comparison && deadlock...").

In any case, the deadlock situation is a must-have fix.

Reported-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Dmitry Adamushko <dmitry.adamushko@gmail.com>
Tested-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: <stable@kernel.org>

Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agofs/9p: change simple_strtol to simple_strtoul
Julia Lawall [Fri, 19 Dec 2008 22:50:22 +0000]
fs/9p: change simple_strtol to simple_strtoul

Since v9ses->uid is unsigned, it would seem better to use simple_strtoul that

A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
long e;
position p;

e = simple_strtol@p(...)

position p != r2.p;
type T;
T e;

e =
- simple_strtol@p
+ simple_strtoul
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years ago9p: convert d_iname references to d_name.name
Wu Fengguang [Fri, 19 Dec 2008 22:47:40 +0000]
9p: convert d_iname references to d_name.name

d_iname is rubbish for long file names.
Use d_name.name in printks instead.

Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Acked-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years ago9p: Remove potentially bad parameter from function entry debug print.
Duane Griffin [Fri, 19 Dec 2008 22:45:21 +0000]
9p: Remove potentially bad parameter from function entry debug print.

Signed-off-by: Duane Griffin <duaneg@dghda.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Fri, 19 Dec 2008 19:37:23 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] mpt fusion: clear list of outstanding commands on host reset
  [SCSI] scsi_lib: only call scsi_unprep_request() under queue lock
  [SCSI] ibmvstgt: move crq_queue_create to the end of initialization
  [SCSI] libiscsi REGRESSION: fix passthrough support with older iscsi tools
  [SCSI] aacraid: disable Dell Percraid quirk on Adaptec 2200S and 2120S

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 19 Dec 2008 19:37:07 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: Fix a Oops bug in omap soc driver.
  ALSA: hda - Remove non-working headphone control for Dell laptops
  ALSA: hda - Add no-jd model for IDT 92HD73xx
  ALSA: Revert "ALSA: hda: removed unneeded hp_nid references"
  ALSA: hda - Add quirk for Dell Studio 17
  ALSA: hda - Fix silent HP output on D975

10 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 19 Dec 2008 19:36:49 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cciss: fix problem that deleting multiple logical drives could cause a panic

10 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 19 Dec 2008 19:36:04 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: GEM on PAE has problems - disable it for now.
  drm/i915: Don't return busy for buffers left on the flushing list.

10 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Fri, 19 Dec 2008 19:34:36 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: Don't read past end of bitmap when reading bitmap.

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Fri, 19 Dec 2008 19:33:10 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI hotplug: ibmphp: Fix module ref count underflow
  PCI hotplug: acpiphp wants a 64-bit _SUN
  PCI: pciehp: fix unexpected power off with pciehp_force
  PCI: fix aer resume sanity check

10 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Fri, 19 Dec 2008 14:37:12 +0000]
Merge branch 'fix/asoc' into for-linus

10 years agoALSA: Fix a Oops bug in omap soc driver.
Stanley Miao [Fri, 19 Dec 2008 14:08:22 +0000]
ALSA: Fix a Oops bug in omap soc driver.

There will be a Oops or frequent underrun messages when playing music with
omap soc driver, this is because a data region is incorretly sized, other data
region will be overwriten when writing to this data region.

Signed-off-by: Stanley Miao <stanley.miao@windriver.com>
Acked-by: Jarkko Nikula <jarkko.nikula@nokia.com>
Cc: stable@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: hda - Remove non-working headphone control for Dell laptops
Takashi Iwai [Fri, 19 Dec 2008 13:02:32 +0000]
ALSA: hda - Remove non-working headphone control for Dell laptops

The previous commit re-enabled hp_nid setup for IDT92HD73*, but
it's unneeded indeed for Dell laptops that have multiple headphones.
Setting the extra hp_nid results in a non-working "Headpohne" mixer
control.  Thus hp_nid should be 0 for these dell models.

Also, the automatic addition of hp_nid should check whether it's
a dual-HP model or not.  For dual-HPs, the pins are already checked
by the early workaround.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoACPI: don't cond_resched() when irqs_disabled()
Wu Fengguang [Wed, 26 Nov 2008 06:35:22 +0000]
ACPI: don't cond_resched() when irqs_disabled()

The ACPI interpreter usually runs with irqs enabled.
However, during suspend/resume it runs with
irqs disabled to evaluate _GTS/_BFS, as well as
by irqrouter_resume() which evaluates _CRS, _PRS, _SRS.


Signed-off-by: Wu Fengguang <wfg@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoACPI: fix 2.6.28 acpi.debug_level regression
Bjorn Helgaas [Thu, 13 Nov 2008 23:30:13 +0000]
ACPI: fix 2.6.28 acpi.debug_level regression

acpi_early_init() was changed to over-write the cmdline param,
making it really inconvenient to set debug flags at boot-time.

This sets the default level to "info", which is what all the ACPI
drivers use.  So to enable messages from drivers, you only have to
supply the "layer" (a.k.a. "component").  For non-"info" ACPI core
and ACPI interpreter messages, you have to supply both level and
layer masks, as before.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoALSA: hda - Add no-jd model for IDT 92HD73xx
Takashi Iwai [Wed, 17 Dec 2008 13:51:01 +0000]
ALSA: hda - Add no-jd model for IDT 92HD73xx

Added the model without the jack-detection for some desktops that
have really no jack-detection.  The recent driver caused regressions
regarding the sound output on such machines.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agoALSA: Revert "ALSA: hda: removed unneeded hp_nid references"
Takashi Iwai [Fri, 19 Dec 2008 07:20:38 +0000]
ALSA: Revert "ALSA: hda: removed unneeded hp_nid references"

This reverts commit 07f455f779acfb3eba4921fd1399761559b10fa9.
    ALSA: hda: removed unneeded hp_nid references

    Removed unneeded hp_nid references for 92hd73xx codec family.

This caused the silent output on some Intel desktops due to missing
routing of widget 0x0a and 0x0d.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agocciss: fix problem that deleting multiple logical drives could cause a panic
Stephen M. Cameron [Thu, 18 Dec 2008 13:55:11 +0000]
cciss: fix problem that deleting multiple logical drives could cause a panic

Fix problem that deleting multiple logical drives could cause a panic.

It fixes a panic which can be easily reproduced in the following way: Just
create several "arrays," each with multiple logical drives via hpacucli,
then delete the first array, and it will blow up in deregister_disk(), in
the call to get_host() when it tries to dig the hba pointer out of a NULL
queue pointer.

The problem has been present since my code to make rebuild_lun_table
behave better went in.

Signed-off-by: Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoALSA: hda - Add quirk for Dell Studio 17
Joerg Schirottke [Fri, 19 Dec 2008 07:13:49 +0000]
ALSA: hda - Add quirk for Dell Studio 17

Added the matching model=dell-m6 for Dell Studio 17 laptop.

Signed-off-by: Joerg Schirottke <master@kanotix.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agodrm/i915: GEM on PAE has problems - disable it for now.
Dave Airlie [Fri, 19 Dec 2008 05:38:34 +0000]
drm/i915: GEM on PAE has problems - disable it for now.

On PAE systems, GEM allocates pages using shmem, and passes these
pages to be bound into AGP, however the AGP interfaces + the x86
set_memory interfaces all take unsigned long not dma_addr_t.

The initial fix for this was a mess, so we need to do this correctly
for 2.6.29.

Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agodrm/i915: Don't return busy for buffers left on the flushing list.
Eric Anholt [Mon, 15 Dec 2008 03:05:04 +0000]
drm/i915: Don't return busy for buffers left on the flushing list.

These buffers don't have active rendering still occurring to them, they just
need either a flush to be emitted or a retire_requests to occur so that we
notice they're done.  Return unbusy so that one of the two occurs.  The two
expected consumers of this interface (OpenGL and libdrm_intel BO cache) both
want this behavior.

Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agomd: Don't read past end of bitmap when reading bitmap.
NeilBrown [Fri, 19 Dec 2008 05:25:01 +0000]
md: Don't read past end of bitmap when reading bitmap.

When we read the write-intent-bitmap off the device, we currently
read a whole number of pages.
When PAGE_SIZE is 4K, this works due to the alignment we enforce
on the superblock and bitmap.
When PAGE_SIZE is 64K, this case read past the end-of-device
which causes an error.

When we write the superblock, we ensure to clip the last page
to just be the required size.  Copy that code into the read path
to just read the required number of sectors.

Signed-off-by: Neil Brown <neilb@suse.de>
Cc: stable@kernel.org

10 years agoppp: fix segfaults introduced by netdev_priv changes
James Chapman [Wed, 17 Dec 2008 12:02:16 +0000]
ppp: fix segfaults introduced by netdev_priv changes

This patch fixes a segfault in ppp_shutdown_interface() and
ppp_destroy_interface() when a PPP connection is closed. I bisected
the problem to the following commit:

  commit c8019bf3aff653cceb64f66489fc299ee5957b57
  Author: Wang Chen <wangchen@cn.fujitsu.com>
  Date:   Thu Nov 20 04:24:17 2008 -0800

    netdevice ppp: Convert directly reference of netdev->priv

    1. Use netdev_priv(dev) to replace dev->priv.
    2. Alloc netdev's private data by alloc_netdev().

Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The original ppp_generic code treated the netdev and struct ppp as
independent data structures which were freed separately. In moving the
ppp struct into the netdev, it is now possible for the private data to
be freed before the call to ppp_shutdown_interface(), which is bad.

The kfree(ppp) in ppp_destroy_interface() is also wrong; presumably
ppp hasn't worked since the above commit.

The following patch fixes both problems.

Signed-off-by: James Chapman <jchapman@katalix.com>
Reviewed-by: Wang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agonet: Fix module refcount leak in kernel_accept()
Wei Yongjun [Fri, 19 Dec 2008 03:35:10 +0000]
net: Fix module refcount leak in kernel_accept()

The kernel_accept() does not hold the module refcount of newsock->ops->owner,
so we need __module_get(newsock->ops->owner) code after call kernel_accept()
by hand.
In sunrpc, the module refcount is missing to hold. So this cause kernel panic.

Used following script to reproduct:

while [ 1 ];
    mount -t nfs4 /mnt
    touch /mnt/file
    umount /mnt
    lsmod | grep ipv6

This patch fixed the problem by add __module_get(newsock->ops->owner) to
kernel_accept(). So we do not need to used __module_get(newsock->ops->owner)
in every place when used kernel_accept().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoLinux 2.6.28-rc9
Linus Torvalds [Fri, 19 Dec 2008 01:20:13 +0000]
Linux 2.6.28-rc9

10 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Thu, 18 Dec 2008 20:05:53 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/djbw/async_tx

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
  async_xor: dma_map destination DMA_BIDIRECTIONAL
  dmaengine: protect 'id' from concurrent registrations
  ioat: wait for self-test completion

10 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen...
Linus Torvalds [Thu, 18 Dec 2008 20:01:02 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/hskinnemoen/avr32-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  avr32: favr-32 build fix
  ATSTK1006: Fix boot from NAND flash
  avr32: remove .note.gnu.build-id section when making vmlinux.bin
  avr32: Enable pullup on USART TX lines

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 18 Dec 2008 20:00:46 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  bnx2: Fix bug in bnx2_free_rx_mem().
  irda: Add irda_skb_cb qdisc related padding
  jme: Fixed a typo
  net: kernel BUG at drivers/net/phy/mdio_bus.c:165!
  drivers/net: starfire: Fix napi ->poll() weight handling
  tlan: Fix pci memory unmapping
  enc28j60: use netif_rx_ni() to deliver RX packets
  tlan: Fix small (< 64 bytes) datagram transmissions
  netfilter: ctnetlink: fix missing CTA_NAT_SEQ_UNSPEC

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Thu, 18 Dec 2008 20:00:01 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: We need to implement arch_ptrace_stop().

10 years agoMaintainer email fixes for inotify
John McCutchan [Thu, 18 Dec 2008 01:43:02 +0000]
Maintainer email fixes for inotify

Update John McCutchan and Robert Love's email addresses for
maintenance of inotify

Signed-off-by: John McCutchan <john@johnmccutchan.com>
Acked-by: Robert Love <rlove@rlove.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoavr32: favr-32 build fix
Haavard Skinnemoen [Thu, 18 Dec 2008 15:20:47 +0000]
avr32: favr-32 build fix

The favr-32 board code still refers to the old asm/arch header files
which were moved to mach/ some time ago.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

10 years agoATSTK1006: Fix boot from NAND flash
Haavard Skinnemoen [Thu, 18 Dec 2008 15:13:24 +0000]
ATSTK1006: Fix boot from NAND flash

Enable JFFS2 write buffer support so that the kernel can access a root
filesystem in NAND flash.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

10 years agoMerge branch 'iommu-fixes-2.6.28' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Thu, 18 Dec 2008 12:28:11 +0000]
Merge branch 'iommu-fixes-2.6.28' of git://git./linux/kernel/git/joro/linux-2.6-iommu into x86/urgent

10 years agox86 gart: don't complain if no AMD GART found
Bjorn Helgaas [Wed, 17 Dec 2008 19:52:34 +0000]
x86 gart: don't complain if no AMD GART found

Impact: remove annoying bootup printk

It's perfectly normal for no AMD GART to be present, e.g., if you have
Intel CPUs.  None of the other iommu_init() functions makes noise when
it finds nothing.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoALSA: hda - Fix silent HP output on D975
Takashi Iwai [Wed, 17 Dec 2008 12:48:29 +0000]
ALSA: hda - Fix silent HP output on D975

Some desktops seems to have no HP/mic jack detection on the front panel,
which results in the silent output in the recent driver, because the
driver mutes the output (to save power) when no plug is detected.

This patch adds a new model that disables the jack-detection.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agobnx2: Fix bug in bnx2_free_rx_mem().
Michael Chan [Thu, 18 Dec 2008 03:06:08 +0000]
bnx2: Fix bug in bnx2_free_rx_mem().

DMA memory for the jumbo rx page rings was freed incorrectly using the
wrong local variable as the array index.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>