11 years agolibiscsi: don't run scsi eh if iscsi task is making progress
Mike Christie [Tue, 16 Jun 2009 03:11:08 +0000]
libiscsi: don't run scsi eh if iscsi task is making progress

If we are sending or receiving data for the task successfully do
not run the scsi eh, because we know the task is making progress.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

11 years agocxgb3i: suppot of different kernel page sizes
Karen Xie [Mon, 15 Jun 2009 18:15:16 +0000]
cxgb3i: suppot of different kernel page sizes

The default kernel pages supported are 4K, 8K, 16K, and 64K. Re-calculate
entries if PAGE_SIZE is not one of the defaults.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

11 years agocxgb3i: use kref to track ddp usage
Karen Xie [Mon, 15 Jun 2009 18:15:16 +0000]
cxgb3i: use kref to track ddp usage

The iscsi ddp functionality could be used by multiple iscsi entities,
add a refcnt to keep track of it, so we would not release it pre-maturely.

Signed-off-by: Karen Xie <kxie@chelsio.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

11 years agosd: Block limits VPD support
Martin K. Petersen [Sat, 23 May 2009 15:43:39 +0000]
sd: Block limits VPD support

Query the block limits VPD page and adjust queue minimum and optimal I/O
sizes.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

11 years agosd: Detect non-rotational devices
Martin K. Petersen [Sat, 23 May 2009 15:43:38 +0000]
sd: Detect non-rotational devices

Detect non-rotational devices and set the queue flag accordingly.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

11 years agosd: Physical block size and alignment support
Martin K. Petersen [Sat, 23 May 2009 15:43:37 +0000]
sd: Physical block size and alignment support

Extract physical block size and lowest aligned LBA from READ
CAPACITY(16) response and adjust queue parameters.

Report physical block size and alignment when applicable.

[jejb: fix up trailing whitespace]
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

11 years agomm: page_alloc: clear PG_locked before checking flags on free
Johannes Weiner [Fri, 19 Jun 2009 17:30:56 +0000]
mm: page_alloc: clear PG_locked before checking flags on free

da456f1 "page allocator: do not disable interrupts in free_page_mlock()" moved
the PG_mlocked clearing after the flag sanity checking which makes mlocked
pages always trigger 'bad page'.  Fix this by clearing the bit up front.

Reported--and-debugged-by: Peter Chubb <peter.chubb@nicta.com.au>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Tested-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agox86, 64-bit: Clean up user address masking
Linus Torvalds [Sat, 20 Jun 2009 22:40:00 +0000]
x86, 64-bit: Clean up user address masking

The discussion about using "access_ok()" in get_user_pages_fast() (see
commit 7f8189068726492950bf1a2dcfd9b51314560abf: "x86: don't use
'access_ok()' as a range check in get_user_pages_fast()" for details and
end result), made us notice that x86-64 was really being very sloppy
about virtual address checking.

So be way more careful and straightforward about masking x86-64 virtual
addresses:

 - All the VIRTUAL_MASK* variants now cover half of the address
   space, it's not like we can use the full mask on a signed
   integer, and the larger mask just invites mistakes when
   applying it to either half of the 48-bit address space.

 - /proc/kcore's kc_offset_to_vaddr() becomes a lot more
   obvious when it transforms a file offset into a
   (kernel-half) virtual address.

 - Unify/simplify the 32-bit and 64-bit USER_DS definition to
   be based on TASK_SIZE_MAX.

This cleanup and more careful/obvious user virtual address checking also
uncovered a buglet in the x86-64 implementation of strnlen_user(): it
would do an "access_ok()" check on the whole potential area, even if the
string itself was much shorter, and thus return an error even for valid
strings. Our sloppy checking had hidden this.

So this fixes 'strnlen_user()' to do this properly, the same way we
already handled user strings in 'strncpy_from_user()'.  Namely by just
checking the first byte, and then relying on fault handling for the
rest.  That always works, since we impose a guard page that cannot be
mapped at the end of the user space address space (and even if we
didn't, we'd have the address space hole).

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 20 Jun 2009 18:30:01 +0000]
Merge branch 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq, irq.h: Fix kernel-doc warnings
  genirq: fix comment to say IRQ_WAKE_THREAD

11 years agoMerge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Sat, 20 Jun 2009 18:29:32 +0000]
Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (49 commits)
  perfcounter: Handle some IO return values
  perf_counter: Push perf_sample_data through the swcounter code
  perf_counter tools: Define and use our own u64, s64 etc. definitions
  perf_counter: Close race in perf_lock_task_context()
  perf_counter, x86: Improve interactions with fast-gup
  perf_counter: Simplify and fix task migration counting
  perf_counter tools: Add a data file header
  perf_counter: Update userspace callchain sampling uses
  perf_counter: Make callchain samples extensible
  perf report: Filter to parent set by default
  perf_counter tools: Handle lost events
  perf_counter: Add event overlow handling
  fs: Provide empty .set_page_dirty() aop for anon inodes
  perf_counter: tools: Makefile tweaks for 64-bit powerpc
  perf_counter: powerpc: Add processor back-end for MPC7450 family
  perf_counter: powerpc: Make powerpc perf_counter code safe for 32-bit kernels
  perf_counter: powerpc: Change how processor-specific back-ends get selected
  perf_counter: powerpc: Use unsigned long for register and constraint values
  perf_counter: powerpc: Enable use of software counters on 32-bit powerpc
  perf_counter tools: Add and use isprint()
  ...

11 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 20 Jun 2009 17:57:40 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix out of scope variable access in sched_slice()
  sched: Hide runqueues from direct refer at source code level
  sched: Remove unneeded __ref tag
  sched, x86: Fix cpufreq + sched_clock() TSC scaling

11 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 20 Jun 2009 17:56:46 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (24 commits)
  tracing/urgent: warn in case of ftrace_start_up inbalance
  tracing/urgent: fix unbalanced ftrace_start_up
  function-graph: add stack frame test
  function-graph: disable when both x86_32 and optimize for size are configured
  ring-buffer: have benchmark test print to trace buffer
  ring-buffer: do not grab locks in nmi
  ring-buffer: add locks around rb_per_cpu_empty
  ring-buffer: check for less than two in size allocation
  ring-buffer: remove useless compile check for buffer_page size
  ring-buffer: remove useless warn on check
  ring-buffer: use BUF_PAGE_HDR_SIZE in calculating index
  tracing: update sample event documentation
  tracing/filters: fix race between filter setting and module unload
  tracing/filters: free filter_string in destroy_preds()
  ring-buffer: use commit counters for commit pointer accounting
  ring-buffer: remove unused variable
  ring-buffer: have benchmark test handle discarded events
  ring-buffer: prevent adding write in discarded area
  tracing/filters: strloc should be unsigned short
  tracing/filters: operand can be negative
  ...

Fix up kmemcheck-induced conflict in kernel/trace/ring_buffer.c manually

11 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 20 Jun 2009 17:51:44 +0000]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  NOHZ: Properly feed cpufreq ondemand governor

11 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 20 Jun 2009 17:49:48 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (45 commits)
  x86, mce: fix error path in mce_create_device()
  x86: use zalloc_cpumask_var for mce_dev_initialized
  x86: fix duplicated sysfs attribute
  x86: de-assembler-ize asm/desc.h
  i386: fix/simplify espfix stack switching, move it into assembly
  i386: fix return to 16-bit stack from NMI handler
  x86, ioapic: Don't call disconnect_bsp_APIC if no APIC present
  x86: Remove duplicated #include's
  x86: msr.h linux/types.h is only required for __KERNEL__
  x86: nmi: Add Intel processor 0x6f4 to NMI perfctr1 workaround
  x86, mce: mce_intel.c needs <asm/apic.h>
  x86: apic/io_apic.c: dmar_msi_type should be static
  x86, io_apic.c: Work around compiler warning
  x86: mce: Don't touch THERMAL_APIC_VECTOR if no active APIC present
  x86: mce: Handle banks == 0 case in K7 quirk
  x86, boot: use .code16gcc instead of .code16
  x86: correct the conversion of EFI memory types
  x86: cap iomem_resource to addressable physical memory
  x86, mce: rename _64.c files which are no longer 64-bit-specific
  x86, mce: mce.h cleanup
  ...

Manually fix up trivial conflict in arch/x86/mm/fault.c

11 years agoMerge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Sat, 20 Jun 2009 17:37:01 +0000]
Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add missing symbols for CONSTRUCTORS support
  microblaze: remove init_mm

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes
Linus Torvalds [Sat, 20 Jun 2009 17:19:49 +0000]
Merge git://git./linux/kernel/git/sam/kbuild-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes:
  kernel-doc: fix param matching for array params
  kernel-doc: ignore kmemcheck_bitfield_begin/end
  kallsyms: fix inverted valid symbol checking
  kbuild: fix build error during make htmldocs

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 20 Jun 2009 17:17:02 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (35 commits)
  Input: add driver for Synaptics I2C touchpad
  Input: synaptics - add support for reporting x/y resolution
  Input: ALPS - handle touchpoints buttons correctly
  Input: gpio-keys - change timer to workqueue
  Input: ads7846 - pin change interrupt support
  Input: add support for touchscreen on W90P910 ARM platform
  Input: appletouch - improve finger detection
  Input: wacom - clear Intuos4 wheel data when finger leaves proximity
  Input: ucb1400 - move static function from header into core
  Input: add driver for EETI touchpanels
  Input: ads7846 - more detailed model name in sysfs
  Input: ads7846 - support swapping x and y axes
  Input: ati_remote2 - use non-atomic bitops
  Input: introduce lm8323 keypad driver
  Input: psmouse - ESD workaround fix for OLPC XO touchpad
  Input: tsc2007 - make sure platform provides get_pendown_state()
  Input: uinput - flush all pending ff effects before destroying device
  Input: simplify name handling for certain input handles
  Input: serio - do not use deprecated dev.power.power_state
  Input: wacom - add support for Intuos4 tablets
  ...

11 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Sat, 20 Jun 2009 17:15:30 +0000]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (24 commits)
  agp/intel: Make intel_i965_mask_memory use dma_addr_t for physical addresses
  agp: add user mapping support to ATI AGP bridge.
  drm/i915: enable GEM on PAE.
  drm/radeon: fix unused variables warning
  agp: switch AGP to use page array instead of unsigned long array
  agpgart: detected ALi M???? chipset with M1621
  drm/radeon: command stream checker for r3xx-r5xx hardware
  drm/radeon: Fully initialize LVDS info also when we can't get it from the ROM.
  radeon: Fix CP byte order on big endian architectures with KMS.
  agp/uninorth: Handle user memory types.
  drm/ttm: Add some powerpc cache flush code.
  radeon: Enable modesetting on non-x86.
  drm/radeon: Respect AGP cant_use_aperture flag.
  drm: EDID endianness fixes.
  drm/radeon: this VRAM vs aperture test is wrong, just remove it.
  drm/ttm: fix an error path to exit function correctly
  drm: Apply "Memory fragmentation from lost alignment blocks"
  ttm: Return -ERESTART when a signal interrupts bo eviction.
  drm: Remove memory debugging infrastructure.
  drm/i915: Clear fence register on tiling stride change.
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6
Linus Torvalds [Sat, 20 Jun 2009 17:14:11 +0000]
Merge git://git./linux/kernel/git/hirofumi/fatfs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hirofumi/fatfs-2.6:
  fat: Fix the removal of opts->fs_dmask

11 years agoMerge branch 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Sat, 20 Jun 2009 17:11:11 +0000]
Merge branch 'for-2.6.31' of git://git./linux/kernel/git/bart/ide-2.6

* 'for-2.6.31' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (34 commits)
  ide-cd: prevent null pointer deref via cdrom_newpc_intr
  ide: BUG() on unknown requests
  ide: filter out invalid DMA xfer mode changes in HDIO_DRIVE_CMD ioctl handler
  ide: do not access ide_drive_t 'drive_data' field directly
  sl82c105: implement test_irq() method
  siimage: implement test_irq() method
  pdc202xx_old: implement test_irq() method (take 2)
  cmd64x: implement test_irq() method
  cmd640: implement test_irq() method
  ide: move ack_intr() method into 'struct ide_port_ops' (take 2)
  ide: move IRQ clearing from ack_intr() method to clear_irq() method (take 2)
  siimage: use ide_dma_test_irq() (take 2)
  cmd64x: implement clear_irq() method (take 2)
  ide: call clear_irq() method in ide_timer_expiry()
  sgiioc4: coding style cleanup
  ide: don't enable IORDY at a probe time
  ide: IORDY handling fixes
  ata: add ata_id_pio_need_iordy() helper (v2)
  ide-tape: fix build issue
  ide: unify interrupt reason checking
  ...

11 years agox86: don't use 'access_ok()' as a range check in get_user_pages_fast()
Linus Torvalds [Sat, 20 Jun 2009 16:52:27 +0000]
x86: don't use 'access_ok()' as a range check in get_user_pages_fast()

It's really not right to use 'access_ok()', since that is meant for the
normal "get_user()" and "copy_from/to_user()" accesses, which are done
through the TLB, rather than through the page tables.

Why? access_ok() does both too few, and too many checks.  Too many,
because it is meant for regular kernel accesses that will not honor the
'user' bit in the page tables, and because it honors the USER_DS vs
KERNEL_DS distinction that we shouldn't care about in GUP.  And too few,
because it doesn't do the 'canonical' check on the address on x86-64,
since the TLB will do that for us.

So instead of using a function that isn't meant for this, and does
something else and much more complicated, just do the real rules: we
don't want the range to overflow, and on x86-64, we want it to be a
canonical low address (on 32-bit, all addresses are canonical).

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'tip/tracing/urgent-1' of git://git.kernel.org/pub/scm/linux/kernel...
Ingo Molnar [Sat, 20 Jun 2009 16:26:48 +0000]
Merge branch 'tip/tracing/urgent-1' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent

11 years agoMerge branch 'tip/tracing/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Sat, 20 Jun 2009 15:25:49 +0000]
Merge branch 'tip/tracing/urgent' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into tracing/urgent

11 years agofat: Fix the removal of opts->fs_dmask
OGAWA Hirofumi [Sat, 20 Jun 2009 12:50:07 +0000]
fat: Fix the removal of opts->fs_dmask

(ce3b0f8d5c2203301fc87f3aaaed73e5819e2a48: New helper - current_umask())
is removing the opts->fs_dmask, probably it's a cut-and-paste
miss or something.

Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>

11 years agomicroblaze: Add missing symbols for CONSTRUCTORS support
Michal Simek [Sat, 20 Jun 2009 12:24:01 +0000]
microblaze: Add missing symbols for CONSTRUCTORS support

Commit b99b87f70c7785ab1e253c6220f4b0b57ce3a7f7 add CONSTRUCTOR
support to Linux but Microblaze not defined KERNEL_CTORS symbols
which are used with that patch.
This patch fixed it.

Signed-off-by: Michal Simek <monstr@monstr.eu>

11 years agomicroblaze: remove init_mm
Arnd Bergmann [Thu, 18 Jun 2009 17:55:26 +0000]
microblaze: remove init_mm

Alexey removed the definition for init_mm from all architectures
but forgot microblaze, which was only recently added.
This fixes the microblaze build by dropping it there as well.

Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <monstr@monstr.eu>

11 years agokernel-doc: fix param matching for array params
Randy Dunlap [Thu, 18 Jun 2009 00:37:47 +0000]
kernel-doc: fix param matching for array params

Fix function actual parameter vs. kernel-doc description matching
so that a warning is not printed when it should not be:

Warning(include/linux/etherdevice.h:199): Excess function parameter 'addr' description in 'is_etherdev_addr'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

11 years agokernel-doc: ignore kmemcheck_bitfield_begin/end
Randy Dunlap [Thu, 18 Jun 2009 00:36:15 +0000]
kernel-doc: ignore kmemcheck_bitfield_begin/end

Teach kernel-doc to ignore kmemcheck_bitfield_{begin,end} sugar
so that it won't generate warnings like this:

Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_begin(flags)'
Warning(include/net/sock.h:297): No description found for parameter 'kmemcheck_bitfield_end(flags)'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

11 years agokallsyms: fix inverted valid symbol checking
Mike Frysinger [Mon, 15 Jun 2009 11:52:48 +0000]
kallsyms: fix inverted valid symbol checking

The previous commit (17b1f0de) introduced a slightly broken consolidation
of the memory text range checking.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

11 years agokbuild: fix build error during make htmldocs
Amerigo Wang [Fri, 19 Jun 2009 07:06:54 +0000]
kbuild: fix build error during make htmldocs

Fix the following build error when do 'make htmldocs':

 DOCPROC Documentation/DocBook/debugobjects.xml
exec /scripts/kernel-doc: No such file or directory
exec /scripts/kernel-doc: No such file or directory

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: WANG Cong <amwang@redhat.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

11 years agoperfcounter: Handle some IO return values
Frederic Weisbecker [Sat, 20 Jun 2009 00:01:40 +0000]
perfcounter: Handle some IO return values

Building perfcounter tools raises the following warnings:

 builtin-record.c: In function ‘atexit_header’:
 builtin-record.c:464: erreur: ignoring return value of ‘pwrite’, declared with attribute warn_unused_result
 builtin-record.c: In function ‘__cmd_record’:
 builtin-record.c:503: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result

 builtin-report.c: In function ‘__cmd_report’:
 builtin-report.c:1403: erreur: ignoring return value of ‘read’, declared with attribute warn_unused_result

This patch handles these IO return values.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1245456100-5477-1-git-send-email-fweisbec@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoperf_counter: Push perf_sample_data through the swcounter code
Peter Zijlstra [Fri, 19 Jun 2009 16:11:53 +0000]
perf_counter: Push perf_sample_data through the swcounter code

Push the perf_sample_data further outwards to the swcounter interface,
to abstract it away some more.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoide-cd: prevent null pointer deref via cdrom_newpc_intr
Rainer Weikusat [Thu, 18 Jun 2009 15:04:00 +0000]
ide-cd: prevent null pointer deref via cdrom_newpc_intr

With 2.6.30, the error handling code in cdrom_newpc_intr was changed
to deal with partial request failures by normally completing the 'good'
parts of a request and only 'error' the last (and presumably,
incompletely transferred) bio associated with a particular
request. In order to do this, ide_complete_rq is called over
ide_cd_error_cmd() to partially complete the rq. The block layer
does partial completion only for requests with bio's and if the
rq doesn't have one (eg 'GPCMD_READ_DISC_INFO') the request is
completed as a whole and the drive->hwif->rq pointer set to NULL
afterwards. When calling ide_complete_rq again to report
the error, this null pointer is derefenced, resulting in a kernel
crash.

This fixes http://bugzilla.kernel.org/show_bug.cgi?id=13399.

Signed-off-by: Rainer Weikusat <rweikusat@mssgmbh.com>
Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoMerge branch 'x86/mce3' into x86/urgent
Ingo Molnar [Sat, 20 Jun 2009 08:54:22 +0000]
Merge branch 'x86/mce3' into x86/urgent

11 years agoInput: add driver for Synaptics I2C touchpad
Mike Rapoport [Thu, 11 Jun 2009 15:08:39 +0000]
Input: add driver for Synaptics I2C touchpad

This driver supports Synaptics I2C touchpad controller on eXeda
mobile device. Unfortunaltely it only works in relative mode and
thus is not comaptible with Xorg Synaptics driver.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

11 years agoInput: synaptics - add support for reporting x/y resolution
Tero Saarni [Thu, 11 Jun 2009 06:27:24 +0000]
Input: synaptics - add support for reporting x/y resolution

Synaptics uses anisotropic coordinate system.  On some wide touchpads
vertical resolution can be twice as high as horizontal which causes
unequal sensitivity on x/y directions.  Add support for reading the
resolution with EVIOCGABS ioctl.

Signed-off-by: Tero Saarni <tero.saarni@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

11 years agotracing/urgent: warn in case of ftrace_start_up inbalance
Frederic Weisbecker [Sat, 20 Jun 2009 04:52:21 +0000]
tracing/urgent: warn in case of ftrace_start_up inbalance

Prevent from further ftrace_start_up inbalances so that we avoid
future nop patching omissions with dynamic ftrace.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>

11 years agotracing/urgent: fix unbalanced ftrace_start_up
Frederic Weisbecker [Sat, 20 Jun 2009 03:45:14 +0000]
tracing/urgent: fix unbalanced ftrace_start_up

Perfcounter reports the following stats for a wide system
profiling:

 #
 # (2364 samples)
 #
 # Overhead  Symbol
 # ........  ......
 #
    15.40%  [k] mwait_idle_with_hints
     8.29%  [k] read_hpet
     5.75%  [k] ftrace_caller
     3.60%  [k] ftrace_call
     [...]

This snapshot has been taken while neither the function tracer nor
the function graph tracer was running.
With dynamic ftrace, such results show a wrong ftrace behaviour
because all calls to ftrace_caller or ftrace_graph_caller (the patched
calls to mcount) are supposed to be patched into nop if none of those
tracers are running.

The problem occurs after the first run of the function tracer. Once we
launch it a second time, the callsites will never be nopped back,
unless you set custom filters.
For example it happens during the self tests at boot time.
The function tracer selftest runs, and then the dynamic tracing is
tested too. After that, the callsites are left un-nopped.

This is because the reset callback of the function tracer tries to
unregister two ftrace callbacks in once: the common function tracer
and the function tracer with stack backtrace, regardless of which
one is currently in use.
It then creates an unbalance on ftrace_start_up value which is expected
to be zero when the last ftrace callback is unregistered. When it
reaches zero, the FTRACE_DISABLE_CALLS is set on the next ftrace
command, triggering the patching into nop. But since it becomes
unbalanced, ie becomes lower than zero, if the kernel functions
are patched again (as in every further function tracer runs), they
won't ever be nopped back.

Note that ftrace_call and ftrace_graph_call are still patched back
to ftrace_stub in the off case, but not the callers of ftrace_call
and ftrace_graph_caller. It means that the tracing is well deactivated
but we waste a useless call into every kernel function.

This patch just unregisters the right ftrace_ops for the function
tracer on its reset callback and ignores the other one which is
not registered, fixing the unbalance. The problem also happens
is .30

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@kernel.org

11 years agoagp/intel: Make intel_i965_mask_memory use dma_addr_t for physical addresses
Pierre Willenbrock [Fri, 19 Jun 2009 16:31:47 +0000]
agp/intel: Make intel_i965_mask_memory use dma_addr_t for physical addresses

Otherwise, the high bits to be stuffed in the unused lower bits of the
page address are lost.

Signed-off-by: Pierre Willenbrock <pierre@pirsoft.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Sat, 20 Jun 2009 00:48:32 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (342 commits)
  Staging: comedi: fix build errors
  Staging: udlfb: update to version 0.2.3
  Staging: udlfb: fix some sparse warnings.
  Staging: udlfb: clean up checkpatch warnings in udlfb.c
  Staging: udlfb: clean up checkpatch warnings in udlfb.h
  Staging: udlfb: add udlfb driver to build
  Staging: add udlfb driver
  Staging: pata_rdc: remove pointless comments
  Staging: pata_rdc: remove DRIVER macros
  Staging: pata_rdc: remove dbgprintf macro
  Staging: pata_rdc: remove broken flag
  Staging: pata_rdc: fix build warnings
  Staging: pata_rdc: use PCI_DEVICE
  Staging: pata_rdc: remove function prototypes
  Staging: pata_rdc: coding style fixes
  Staging: pata_rdc: convert code to work in 2.6.29
  Staging: pata_rdc: add driver to the build system
  Staging: add pata_rdc driver
  Staging: remove obsolete serqt_usb driver
  Staging: serqt_usb2 add the driver to the build
  ...

11 years agoMerge branch 'for-linus' of git://git.infradead.org/users/eparis/notify
Linus Torvalds [Sat, 20 Jun 2009 00:46:44 +0000]
Merge branch 'for-linus' of git://git.infradead.org/users/eparis/notify

* 'for-linus' of git://git.infradead.org/users/eparis/notify:
  inotify: inotify_destroy_mark_entry could get called twice

11 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Sat, 20 Jun 2009 00:45:51 +0000]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c: New macro to initialize i2c address lists on the fly
  i2c: Don't advertise i2c functions when not available
  i2c: Use rwsem instead of mutex for board info
  i2c: Add a sysfs interface to instantiate devices
  i2c: Limit core locking to the necessary sections
  i2c: Kill the redundant client list
  i2c: Kill is_newstyle_driver
  i2c: Merge i2c_attach_client into i2c_new_device
  i2c: Drop i2c_probe function
  i2c: Get rid of the legacy binding model
  i2c: Kill client_register and client_unregister methods

11 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sat, 20 Jun 2009 00:43:04 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  Fix kernel-doc parameter name typo in blk-settings.c:
  block: rename CONFIG_LBD to CONFIG_LBDAF
  block: Fix bounce_pfn setting
  hd: stop defining MAJOR_NR

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6
Linus Torvalds [Sat, 20 Jun 2009 00:42:01 +0000]
Merge git://git./linux/kernel/git/davem/sparc-next-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6:
  sparc64: Fix UP bootup regression.

11 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Sat, 20 Jun 2009 00:40:40 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (35 commits)
  powerpc/5121: make clock debug output more readable
  powerpc/5xxx: Add common mpc5xxx_get_bus_frequency() function
  powerpc/5200: Update pcm030.dts to add i2c eeprom and delete cruft
  powerpc/5200: convert mpc52xx_psc_spi to use cs_control callback
  fbdev/xilinxfb: Fix improper casting and tighen up probe path
  usb/ps3: Add missing annotations
  powerpc: Add memory clobber to mtspr()
  powerpc: Fix invalid construct in our CPU selection Kconfig
  ps3rom: Use ps3_system_bus_[gs]et_drvdata() instead of direct access
  powerpc: Add configurable -Werror for arch/powerpc
  of_serial: Add UPF_FIXED_TYPE flag
  drivers/hvc: Add missing __devexit_p()
  net/ps3: gelic - Add missing annotations
  powerpc: Introduce macro spin_event_timeout()
  powerpc/warp: Fix ISA_DMA_THRESHOLD default
  powerpc/bootwrapper: Custom build options for XPedite52xx targets
  powerpc/85xx: Add defconfig for X-ES MPC85xx boards
  powerpc/85xx: Add dts files for X-ES MPC85xx boards
  powerpc/85xx: Add platform support for X-ES MPC85xx boards
  83xx: add support for the kmeter1 board.
  ...

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
Linus Torvalds [Sat, 20 Jun 2009 00:34:46 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: convert page/tlb to asm-generic
  Blackfin: convert types to asm-generic
  Blackfin: convert irq/process to asm-generic
  Blackfin: convert signal/mmap to asm-generic
  Blackfin: convert locking primitives to asm-generic
  Blackfin: convert termios to asm-generic
  Blackfin: convert simple headers to asm-generic
  Blackfin: convert socket/poll to asm-generic
  Blackfin: convert user/elf to asm-generic
  Blackfin: convert shm/sysv/ipc to asm-generic
  Blackfin: convert asm/ioctls.h to asm-generic/ioctls.h
  Blackfin: only build irqpanic.c when needed
  Blackfin: pull in asm/io.h in ksyms for prototypes
  Blackfin: use common test_bit() rather than __test_bit()

11 years agoMAINTAINERS: kmemtrace pattern update
Joe Perches [Thu, 18 Jun 2009 23:49:25 +0000]
MAINTAINERS: kmemtrace pattern update

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Zhao Lei <zhaolei@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMAINTAINERS: ieee802154 fix pattern typo
Joe Perches [Thu, 18 Jun 2009 23:49:24 +0000]
MAINTAINERS: ieee802154 fix pattern typo

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Sergey Lapin <slapin@ossfans.org>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMAINTAINERS: update wireless.h path
Joe Perches [Thu, 18 Jun 2009 23:49:24 +0000]
MAINTAINERS: update wireless.h path

Signed-off-by: Joe Perches <joe@perches.com>
Cc: "John W. Linville" <linville@tuxdriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMAINTAINERS: update Ftrace documentation pattern
Joe Perches [Thu, 18 Jun 2009 23:49:23 +0000]
MAINTAINERS: update Ftrace documentation pattern

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMAINTAINERS: fix Atheros pattern paths
Joe Perches [Thu, 18 Jun 2009 23:49:22 +0000]
MAINTAINERS: fix Atheros pattern paths

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Bob Copeland <me@bobcopeland.com>
Cc: "Luis R . Rodriguez" <lrodriguez@atheros.com>
Cc: Nick Kossifidis <mickflemm@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofbdev: do not allow VESA modes without compiled-in drivers
Krzysztof Helt [Thu, 18 Jun 2009 23:49:21 +0000]
fbdev: do not allow VESA modes without compiled-in drivers

Do not accept VESA modes by the "vga=" kernel parameter if there is no
frame buffer driver compiled-in to handle it.

Also, there is a comment added to the Kconfig description after Werner
Lemberg's suggestion

Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13249

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Reported-by: Werner Lemberg <wl@gnu.org>
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMAINTAINERS: pair names/addresses in EDAC-I82975X
Joe Perches [Thu, 18 Jun 2009 23:49:19 +0000]
MAINTAINERS: pair names/addresses in EDAC-I82975X

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Ranganathan Desikan <rdesikan@jetzbroadband.com>
Cc: "Arvind R." <arvind@acarlab.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodma-mapping: mark dma_sync_single and dma_sync_sg as deprecated
FUJITA Tomonori [Thu, 18 Jun 2009 23:49:19 +0000]
dma-mapping: mark dma_sync_single and dma_sync_sg as deprecated

dma_sync_single() and dma_sync_sg() have been described as "Backwards
compat, remove in 2.7.x" for a long time (since 2.6.5).

This marks dma_sync_single() and dma_sync_sg() as deprecated so the users
get notified before removing them.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodma-mapping: mark DMA_nBITS_MASK as deprecated
Jiri Slaby [Thu, 18 Jun 2009 23:49:18 +0000]
dma-mapping: mark DMA_nBITS_MASK as deprecated

Mark them deprecated so that out-of-tree developers get notified about
this before their modules break when these macros are removed.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Yang Hongyang <yanghy@cn.fujitsu.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoconvert some DMA_nnBIT_MASK() callers
Andrew Morton [Thu, 18 Jun 2009 23:49:17 +0000]
convert some DMA_nnBIT_MASK() callers

We're about to make DMA_nnBIT_MASK() emit `deprecated' warnings.  Convert the
remaining stragglers which are visible to the x86_64 build.

Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Eric Moore <Eric.Moore@lsil.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexander Duyck <alexander.h.duyck@intel.com>
Cc: Yi Zou <yi.zou@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agochar: moxa, prevent opening unavailable ports
Dirk Eibach [Thu, 18 Jun 2009 23:49:15 +0000]
char: moxa, prevent opening unavailable ports

In moxa.c there are 32 minor numbers reserved for each device.  The number
of ports actually available per device is stored in
moxa_board_conf->numPorts.  This number is not considered in moxa_open().
Opening a port that is not available results in a kernel oops.  This patch
adds a test to moxa_open() that prevents opening unavailable ports.

[akpm@linux-foundation.org: avoid multiple returns]
Signed-off-by: Dirk Eibach <eibach@gdsys.de>
Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoistallion: add missing __devexit marking
Mike Frysinger [Thu, 18 Jun 2009 23:49:14 +0000]
istallion: add missing __devexit marking

The remove member of the pci_driver stli_pcidriver uses __devexit_p(), so
the remove function itself should be marked with __devexit.  Even more so
considering the probe function is marked with __devinit.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodtlk: off by one in {read,write}_tts()
Roel Kluin [Thu, 18 Jun 2009 23:49:13 +0000]
dtlk: off by one in {read,write}_tts()

With a postfix increment retries is incremented beyond DTLK_MAX_RETRIES so
the error message is not displayed correctly.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: James R. Van Zandt <jrv@vanzandt.mv.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoptrace: wait_task_zombie: do not account traced sub-threads
Oleg Nesterov [Thu, 18 Jun 2009 23:49:11 +0000]
ptrace: wait_task_zombie: do not account traced sub-threads

The bug is ancient.

If we trace the sub-thread of our natural child and this sub-thread exits,
we update parent->signal->cxxx fields.  But we should not do this until
the whole thread-group exits, otherwise we account this thread (and all
other live threads) twice.

Add the task_detached() check.  No need to check thread_group_empty(),
wait_consider_task()->delay_group_leader() already did this.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Roland McGrath <roland@redhat.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Vitaly Mayatskikh <vmayatsk@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agortc: make rtc_update_irq callable with irqs enabled
Atsushi Nemoto [Thu, 18 Jun 2009 23:49:09 +0000]
rtc: make rtc_update_irq callable with irqs enabled

The rtc_update_irq() might be called with irqs enabled, if a interrupt
handler was registered without IRQF_DISABLED.  Use
spin_lock_irqsave/spin_unlock_irqrestore instead of spin_lock/spin_unlock.

Also update kerneldoc and drivers which do extra work to follow the
current interface spec, as suggestted by David Brownell.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_mpc8xxx: s/83xx/8xxx/g
Anton Vorontsov [Thu, 18 Jun 2009 23:49:08 +0000]
spi_mpc8xxx: s/83xx/8xxx/g

Since we renamed the file, we might want to rename the file internals too.

Though we don't bother with changing platform driver name and platform
module alias.  The stuff is legacy and hopefully we'll remove it soon.

Suggested-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_mpc83xx: rename spi_83xx.c to spi_8xxx.c
Anton Vorontsov [Thu, 18 Jun 2009 23:49:08 +0000]
spi_mpc83xx: rename spi_83xx.c to spi_8xxx.c

The driver handles MPC83xx, MPC85xx and MPC86xx SPI controllers, so rename
the file for clarity.

Suggested-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_mpc83xx: remove dead code
Anton Vorontsov [Thu, 18 Jun 2009 23:49:07 +0000]
spi_mpc83xx: remove dead code

This patch removes #if 0'ed code, and spi_mpc83xx->busy variable that is
used by that dead snippet only.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_mpc83xx: split mpc83xx_spi_work() into two routines
Anton Vorontsov [Thu, 18 Jun 2009 23:49:06 +0000]
spi_mpc83xx: split mpc83xx_spi_work() into two routines

mpc83xx_spi_work() is quite large, with up to five indentation levels and
is quite difficult to read.

So, split the function in two parts:
1. mpc83xx_spi_work() now only traverse queued spi messages;
2. mpc83xx_spi_do_one_msg() only manages single messages.

There should be no functional changes.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_mpc83xx: fix checkpatch issues
Anton Vorontsov [Thu, 18 Jun 2009 23:49:05 +0000]
spi_mpc83xx: fix checkpatch issues

Checkpatch is spitting errors when seeing the rename patch, so fix the
errors prior to moving.

Following errors and warnings were fixed:

   WARNING: Use #include <linux/io.h> instead of <asm/io.h>
   #1027: FILE: drivers/spi/spi_mpc8xxx.c:37:
   +#include <asm/io.h>

   ERROR: "foo * bar" should be "foo *bar"
   #1111: FILE: drivers/spi/spi_mpc8xxx.c:121:
   +static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)

   ERROR: "foo * bar" should be "foo *bar"
   #1116: FILE: drivers/spi/spi_mpc8xxx.c:126:
   +static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)

   ERROR: "foo * bar" should be "foo *bar"
   #1125: FILE: drivers/spi/spi_mpc8xxx.c:135:
   +       type * rx = mpc83xx_spi->rx;                                      \

   ERROR: "foo * bar" should be "foo *bar"
   #1135: FILE: drivers/spi/spi_mpc8xxx.c:145:
   +       const type * tx = mpc83xx_spi->tx;                      \

   WARNING: suspect code indent for conditional statements (16, 25)
   #1504: FILE: drivers/spi/spi_mpc8xxx.c:514:
   +               while (((event =
   [...]
   +                        cpu_relax();

Following warnings were left over, since fixing them will hurt the
readability.  We'd better fix them by lowering the indentation level by
splitting mpc83xx_spi_work function into two parts.

   WARNING: line over 80 characters
   #1371: FILE: drivers/spi/spi_mpc8xxx.c:381:
   +                                       status = mpc83xx_spi_setup_transfer(spi, t);

   WARNING: line over 80 characters
   #1392: FILE: drivers/spi/spi_mpc8xxx.c:402:
   +                               mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agopowerpc/86xx: add MMC SPI support for MPC8610HPCD boards
Anton Vorontsov [Thu, 18 Jun 2009 23:49:02 +0000]
powerpc/86xx: add MMC SPI support for MPC8610HPCD boards

This patch adds spi and mmc-spi-slot nodes, plus a gpio-controller for
PIXIS' sdcsr bank that is used for managing SPI chip-select and for
reading card's states.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_mpc83xx: add small delay after asserting chip-select line
Anton Vorontsov [Thu, 18 Jun 2009 23:49:01 +0000]
spi_mpc83xx: add small delay after asserting chip-select line

This is needed for some underlaying GPIO controllers that may be a bit
slow, or if chip-select signal need some time to stabilize.

For what it's worth, we already have the similar delay for chip-select
de-assertion case.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_mpc83xx: quieten down the "Requested speed is too low" message
Anton Vorontsov [Thu, 18 Jun 2009 23:49:01 +0000]
spi_mpc83xx: quieten down the "Requested speed is too low" message

When a platform is running at high frequencies it's not always possible to
scale-down a frequency to a requested value, and using mmc_spi driver this
leads to the following printk flood during card polling:

  ...
  mmc_spi spi32766.0: Requested speed is too low: 400000 Hz. Will use
  520828 Hz instead.
  mmc_spi spi32766.0: Requested speed is too low: 400000 Hz. Will use
  520828 Hz instead.
  ...

Fix this by using WARN_ONCE(), it's better than the flood, and also better
than turning dev_err() into dev_dbg(), since we actually want to warn that
some things may not work correctly.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_mpc83xx: handle other Freescale processors
Anton Vorontsov [Thu, 18 Jun 2009 23:48:59 +0000]
spi_mpc83xx: handle other Freescale processors

With this patch we'll able to select spi_mpc83xx driver on the MPC86xx
platforms.  Let the driver depend on FSL_SOC, so we don't have to worry
about Kconfig anymore.

Also remove the "experimental" dependency, the driver has been tested to
work on a various hardware, and surely not experimental anymore.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agobootmem.c: avoid c90 declaration warning
Joe Perches [Thu, 18 Jun 2009 23:48:58 +0000]
bootmem.c: avoid c90 declaration warning

[akpm@linux-foundation.org: cleanup]
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agogpio: driver for PrimeCell PL061 GPIO controller
Baruch Siach [Thu, 18 Jun 2009 23:48:58 +0000]
gpio: driver for PrimeCell PL061 GPIO controller

This is a driver for the ARM PrimeCell PL061 GPIO AMBA peripheral.  The
driver is implemented using the gpiolib framework.

This driver also includes support for the use of the PL061 as an interrupt
controller (secondary).

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoStaging: comedi: fix build errors
Greg Kroah-Hartman [Fri, 19 Jun 2009 18:04:32 +0000]
Staging: comedi: fix build errors

Some of the comedi drivers need timer.h to build properly, so put it
in the comedidev.h file to fix these errors.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: udlfb: update to version 0.2.3
Roberto De Ioris [Thu, 11 Jun 2009 06:02:19 +0000]
Staging: udlfb: update to version 0.2.3

This updates the udlfb to the 0.2.3 version.

From: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: udlfb: fix some sparse warnings.
Greg Kroah-Hartman [Wed, 3 Jun 2009 21:47:21 +0000]
Staging: udlfb: fix some sparse warnings.

There are others remaining due to the __iomem namespace of the
framebuffer data pointer.

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: udlfb: clean up checkpatch warnings in udlfb.c
Greg Kroah-Hartman [Wed, 3 Jun 2009 21:47:08 +0000]
Staging: udlfb: clean up checkpatch warnings in udlfb.c

This cleans up a bunch of checkpatch.pl warnings in the udlfb.c file.

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: udlfb: clean up checkpatch warnings in udlfb.h
Greg Kroah-Hartman [Wed, 3 Jun 2009 21:47:00 +0000]
Staging: udlfb: clean up checkpatch warnings in udlfb.h

This cleans up a bunch of checkpatch.pl warnings in the udlfb.h file.

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: udlfb: add udlfb driver to build
Greg Kroah-Hartman [Wed, 3 Jun 2009 21:45:40 +0000]
Staging: udlfb: add udlfb driver to build

This adds the udlfb driver to the build system

Cc: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: add udlfb driver
Roberto De Ioris [Wed, 3 Jun 2009 21:03:06 +0000]
Staging: add udlfb driver

This adds the udlfb driver, a framebuffer driver for DisplayLink devices.

From: Roberto De Ioris <roberto@unbit.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: remove pointless comments
Greg Kroah-Hartman [Wed, 3 Jun 2009 18:12:41 +0000]
Staging: pata_rdc: remove pointless comments

These comments contribute nothing to the code, and most were just cut
and pasted from another driver.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: remove DRIVER macros
Greg Kroah-Hartman [Wed, 3 Jun 2009 18:07:38 +0000]
Staging: pata_rdc: remove DRIVER macros

They are not needed, and the version one was pointless now that the code
is merged into the tree.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: remove dbgprintf macro
Greg Kroah-Hartman [Wed, 3 Jun 2009 17:17:47 +0000]
Staging: pata_rdc: remove dbgprintf macro

Use dev_dbg() instead.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: remove broken flag
Greg Kroah-Hartman [Wed, 3 Jun 2009 17:17:47 +0000]
Staging: pata_rdc: remove broken flag

The "in_module_init" flag was wrong, so just remove it, it's not needed.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: fix build warnings
Greg Kroah-Hartman [Wed, 3 Jun 2009 17:14:19 +0000]
Staging: pata_rdc: fix build warnings

struct ata_port_info shouldn't be const, so remove that which fixes up
the compiler warnings.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: use PCI_DEVICE
Greg Kroah-Hartman [Wed, 3 Jun 2009 16:47:57 +0000]
Staging: pata_rdc: use PCI_DEVICE

Use the PCI_DEVICE macro, that's what it is there for...

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: remove function prototypes
Greg Kroah-Hartman [Wed, 3 Jun 2009 16:47:57 +0000]
Staging: pata_rdc: remove function prototypes

Move code around so we do not need the function prototypes anymore.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: coding style fixes
Greg Kroah-Hartman [Wed, 3 Jun 2009 14:45:49 +0000]
Staging: pata_rdc: coding style fixes

This fixes a number of coding style issues in the pata_rdc.h file

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: convert code to work in 2.6.29
Greg Kroah-Hartman [Wed, 3 Jun 2009 05:45:46 +0000]
Staging: pata_rdc: convert code to work in 2.6.29

This fixes build problems in the pata_rdc driver due to api changes in
the libata layer.

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: pata_rdc: add driver to the build system
Greg Kroah-Hartman [Wed, 3 Jun 2009 05:45:46 +0000]
Staging: pata_rdc: add driver to the build system

Cc: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: add pata_rdc driver
Kevin Huang [Mon, 1 Jun 2009 03:43:20 +0000]
Staging: add pata_rdc driver

This is our IDE Source code. This is base on kernel 2.6.28.  pata_rdc.h
and pata_rdc.c

From: Kevin Huang <Kevin.Huang@rdc.com.tw>
Cc: Tomy Wang <Tomy.Wang@rdc.com.tw>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: remove obsolete serqt_usb driver
Greg Kroah-Hartman [Tue, 2 Jun 2009 22:16:24 +0000]
Staging: remove obsolete serqt_usb driver

Now that Bill rewrote the driver "properly", this old thing can be removed.

Cc: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: serqt_usb2 add the driver to the build
Bill Pemberton [Sun, 31 May 2009 19:49:42 +0000]
Staging: serqt_usb2 add the driver to the build

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: Add serqt_usb2, a rewrite of serqt_usb for the usb-serial layer
Bill Pemberton [Sun, 31 May 2009 19:49:43 +0000]
Staging: Add serqt_usb2, a rewrite of serqt_usb for the usb-serial layer

This is the serqt_usb driver rewritten to use usb-serial.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: asus_oled: fix build warnings
Greg Kroah-Hartman [Thu, 4 Jun 2009 18:29:54 +0000]
Staging: asus_oled: fix build warnings

This fixes some build warnings in the asus_oled driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: slicoss: fix build warnings
Greg Kroah-Hartman [Thu, 4 Jun 2009 18:29:54 +0000]
Staging: slicoss: fix build warnings

This fixes some build warnings in the slicoss driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: slicoss: Add missing __devexit_p()
Jean Delvare [Thu, 4 Jun 2009 11:35:15 +0000]
Staging: slicoss: Add missing __devexit_p()

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: altpciechdma: fix build warnings
Greg Kroah-Hartman [Thu, 4 Jun 2009 18:29:54 +0000]
Staging: altpciechdma: fix build warnings

This fixes some build warnings in the altpciechdma driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: altpciechdma: Add missing __devexit_p()
Jean Delvare [Thu, 4 Jun 2009 11:35:15 +0000]
Staging: altpciechdma: Add missing __devexit_p()

The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: heci: fix the problem that file_ext->state should be protected by device_lock
Dongxiao Xu [Sun, 31 May 2009 06:44:01 +0000]
Staging: heci: fix the problem that file_ext->state should be protected by device_lock

While access file_ext->state, we should use device_lock to protect it. The
original codes miss this in some places.

Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoStaging: heci: do not print error when heci_bh_handler is already on workqueue
Dongxiao Xu [Sun, 31 May 2009 06:43:58 +0000]
Staging: heci: do not print error when heci_bh_handler is already on workqueue

schedule_work returns 0, if the work is already on the work_queue, else
returns non-zero. Do not print error message if heci_bh_handlerwork was
already on queue.

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>