10 years agopowerpc/nvram: Enable use Generic NVRAM driver for different size chips
Martyn Welch [Thu, 13 Aug 2009 08:03:02 +0000]
powerpc/nvram: Enable use Generic NVRAM driver for different size chips

Remove the reliance on a staticly defined NVRAM size, allowing
platforms to support NVRAMs with sizes differing from the standard.

A fall back value is provided for platforms not supporting this extension.

Signed-off-by: Martyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline
Benjamin Herrenschmidt [Fri, 11 Sep 2009 05:36:09 +0000]
powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline

That code uses dma_mapping_error() with a NULL device, which is
a bad idea :-) The proper fix might be to start using some kind
of pseudo device for all these low level mappings with the
hypervisor but that will be for another day. Since it directly
calls into the low level iommu code, I see no problem in having
it directly test against DMA_ERROR_CODE instead of using the
accessors with a NULL argument for now.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/ps3: Workaround for flash memory I/O error
Geoff Levand [Wed, 9 Sep 2009 13:28:05 +0000]
powerpc/ps3: Workaround for flash memory I/O error

A workaround for flash memory I/O errors when the PS3 internal
hard disk has not been formatted for OtherOS use.

This error condition mainly effects 'Live CD' users who have not
formatted the PS3's internal hard disk for OtherOS.

Fixes errors similar to these when using the ps3-flash-util
or ps3-boot-game-os programs:

  ps3flash read failed 0x2050000
  os_area_header_read: read error: os_area_header: Input/output error
  main:627: os_area_read_hp error.
  ERROR: can't change boot flag

Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead
Benjamin Herrenschmidt [Tue, 8 Sep 2009 14:16:58 +0000]
powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead

Also remove a duplicate setting of it in the context switch path
on BookE.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/perf_counters: Reduce stack usage of power_check_constraints
Paul Mackerras [Wed, 9 Sep 2009 20:28:49 +0000]
powerpc/perf_counters: Reduce stack usage of power_check_constraints

Michael Ellerman reported stack-frame size warnings being produced
for power_check_constraints(), which uses an 8*8 array of u64 and
two 8*8 arrays of unsigned long, which are currently allocated on the
stack, along with some other smaller variables.  These arrays come
to 1.5kB on 64-bit or 1kB on 32-bit, which is a bit too much for the
stack.

This fixes the problem by putting these arrays in the existing
per-cpu cpu_hw_counters struct.  This is OK because two of the call
sites have interrupts disabled already; for the third call site we
use get_cpu_var, which disables preemption, so we know we won't
get a context switch while we're in power_check_constraints().
Note that power_check_constraints() can be called during context
switch but is not called from interrupts.

Reported-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Fix bug where perf_counters breaks oprofile
Paul Mackerras [Wed, 9 Sep 2009 01:26:03 +0000]
powerpc: Fix bug where perf_counters breaks oprofile

Currently there is a bug where if you use oprofile on a pSeries
machine, then use perf_counters, then use oprofile again, oprofile
will not work correctly; it will lose the PMU configuration the next
time the hypervisor does a partition context switch, and thereafter
won't count anything.

Maynard Johnson identified the sequence causing the problem:
- oprofile setup calls ppc_enable_pmcs(), which calls
  pseries_lpar_enable_pmcs, which tells the hypervisor that we want
  to use the PMU, and sets the "PMU in use" flag in the lppaca.
  This flag tells the hypervisor whether it needs to save and restore
  the PMU config.
- The perf_counter code sets and clears the "PMU in use" flag directly
  as it context-switches the PMU between tasks, and leaves it clear
  when it finishes.
- oprofile setup, called for a new oprofile run, calls ppc_enable_pmcs,
  which does nothing because it has already been called.  In particular
  it doesn't set the "PMU in use" flag.

This fixes the problem by arranging for ppc_enable_pmcs to always set
the "PMU in use" flag.  It makes the perf_counter code call
ppc_enable_pmcs also rather than calling the lower-level function
directly, and removes the setting of the "PMU in use" flag from
pseries_lpar_enable_pmcs, since that is now done in its caller.

This also removes the declaration of pasemi_enable_pmcs because it
isn't defined anywhere.

Reported-by: Maynard Johnson <mpjohn@us.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: <stable@kernel.org)
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/85xx: Fix SMP compile error and allow NULL for smp_ops
Kumar Gala [Tue, 8 Sep 2009 17:38:52 +0000]
powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops

The following commit introduced a compile error since it removed
the implementation of smp_85xx_basic_setup:

commit 77c0a700c1c292edafa11c1e52821ce4636f81b0
Author: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Date:   Fri Aug 28 14:25:04 2009 +1000

    powerpc: Properly start decrementer on BookE secondary CPUs

Make it so that smp_ops probe() and setup_cpu() can be set to NULL.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/irq: Improve nanodoc
Wolfram Sang [Thu, 10 Sep 2009 12:47:20 +0000]
powerpc/irq: Improve nanodoc

The OF helpers look like nanodoc but are missing the header. Fix this and a
typo (s/nad/and/) while we are here.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Fix some late PowerMac G5 with PCIe ATI graphics
Benjamin Herrenschmidt [Mon, 31 Aug 2009 21:34:36 +0000]
powerpc: Fix some late PowerMac G5 with PCIe ATI graphics

A misconfiguration by the firmware of the U4 PCIe bridge on PowerMac G5
with the U4 bridge (latest generations, may also affect the iMac G5
"iSight") is causing us to re-assign the PCI BARs of the video card,
which can get it out of sync with the firmware, thus breaking offb.

This works around it by fixing up the bridge configuration properly
at boot time. It also fixes a bug where the firmware provides us with
an incorrect set of accessible regions in the device-tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT
Kumar Gala [Tue, 1 Sep 2009 15:48:42 +0000]
powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT

Switch to using the Power ISA defined PTE format when we have a 64-bit
PTE.  This makes the code handling between fsl-booke and book3e-64
similiar for TLB faults.

Additionally this lets use take advantage of the page size encodings and
full permissions that the HW PTE defines.

Also defined _PMD_PRESENT, _PMD_PRESENT_MASK, and _PMD_BAD since the
32-bit ppc arch code expects them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/book3e: Add missing page sizes
Kumar Gala [Tue, 1 Sep 2009 15:43:54 +0000]
powerpc/book3e: Add missing page sizes

Add defines for the other page sizes.  Even if HW doesn't support them
we made them use them for hugetlbfs support.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/pseries: Fix to handle slb resize across migration
Brian King [Fri, 28 Aug 2009 12:06:29 +0000]
powerpc/pseries: Fix to handle slb resize across migration

The SLB can change sizes across a live migration, which was not
being handled, resulting in possible machine crashes during
migration if migrating to a machine which has a smaller max SLB
size than the source machine. Fix this by first reducing the
SLB size to the minimum possible value, which is 32, prior to
migration. Then during the device tree update which occurs after
migration, we make the call to ensure the SLB gets updated. Also
add the slb_size to the lparcfg output so that the migration
tools can check to make sure the kernel has this capability
before allowing migration in scenarios where the SLB size will change.

BenH: Fixed #include <asm/mmu-hash64.h> -> <asm/mmu.h> to avoid
      breaking ppc32 build

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/powermac: Thermal control turns system off too eagerly
Lyonel Vincent [Sun, 30 Aug 2009 08:54:20 +0000]
powerpc/powermac: Thermal control turns system off too eagerly

On certain PowerMacs, a module (therm_windtunnel) controls various
thermal settings (it can report CPU/case temperature, change speed
of internal fans, etc.)

By default, the hardware thermal control has a temperature limit to
protect the computer from damages (the default limit seems to be 80°C)
but therm_windtunnel.c reduces it to an anormaly low value (65°C),
which means that he computer will shut down randomly when hit by direct
sun light or during summer (summer in France can be quite hot), actually
possibly losing data instead of protecting it.

The overheat limit in therm_windtunnel.c:253-254 should be set to 75°C
and 70°C instead of 65°C and 60°C respectively.

From: Lyonel Vincent <lyonel@ezix.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()
Grant Likely [Fri, 28 Aug 2009 08:58:16 +0000]
powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()

The two versions are doing almost exactly the same thing.  No need to
maintain them as separate files.  This patch also has the side effect
of making the PCI device tree scanning code available to 32 bit powerpc
machines, but no board ports actually make use of this feature at this
point.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/405ex: support cuImage via included dtb
Tiejun Chen [Sat, 22 Aug 2009 16:03:44 +0000]
powerpc/405ex: support cuImage via included dtb

To support cuImage, we need to initialize the required sections and
ensure that it is built.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

10 years agopowerpc/405ex: provide necessary fixup function to support cuImage
Tiejun Chen [Sat, 22 Aug 2009 16:03:43 +0000]
powerpc/405ex: provide necessary fixup function to support cuImage

For cuImage format it's necessary to provide clock fixups since u-boot will
not pass necessary clock frequency into the dtb included into cuImage so we
implement the clock fixups as defined in the technical documentation for the
board and update header file with the basic register definitions.

Signed-off-by: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

10 years agopowerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
Solomon Peachy [Thu, 20 Aug 2009 10:19:47 +0000]
powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC

This patch adds support for the ESTeem 195E Hotfoot SBC.

There are several variants of the SBC deployed, single/dual
ethernet+serial, and also 4MB/8MB flash variations.  In the interest of
having a single kernel image boot on all boards, the cuboot shim detects
the differences and mangles the DTS tree appropriately.

With the exception of the CF interface that was never populated on
production boards, this code/DTS supports all boardpop options.

Signed-off-by: Solomon Peachy <solomon@linux-wlan.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

10 years agopowerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
fkan@amcc.com [Wed, 12 Aug 2009 14:38:47 +0000]
powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.

This patch adds support for the AMCC (AppliedMicro) PPC460SX Eiger evaluation
board.

Signed-off-by: Tai Tri Nguyen <ttnguyen@amcc.com>
Acked-by: Feng Kan <fkan@amcc.com>
Acked-by: Tirumala Marri <tmarri@amcc.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

10 years agopowerpc/44x: Update Arches defconfig
Stefan Roese [Thu, 13 Aug 2009 04:30:56 +0000]
powerpc/44x: Update Arches defconfig

This patch adds NOR MTD support and I2C HWMON support for the AD7414
to the AMCC Arches defconfig.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

10 years agopowerpc/44x: Update Arches dts
Stefan Roese [Thu, 13 Aug 2009 04:30:44 +0000]
powerpc/44x: Update Arches dts

This patch adds some nodes to the AMCC Arches dts:

- L2 cache support
- NOR FLASH mapping with default partitioning
- I2C HWMON device (AD7414)

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>

10 years agopowerpc: Properly start decrementer on BookE secondary CPUs
Benjamin Herrenschmidt [Fri, 28 Aug 2009 04:25:04 +0000]
powerpc: Properly start decrementer on BookE secondary CPUs

This moves the code to start the decrementer on 40x and BookE into
a separate function which is now called from time_init() and
secondary_time_init(), before the respective clock sources are
registered. We also remove the 85xx specific code for doing it
from the platform code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: derive COMMAND_LINE_SIZE from asm-generic
Paul Gortmaker [Thu, 13 Aug 2009 09:37:04 +0000]
powerpc: derive COMMAND_LINE_SIZE from asm-generic

The default COMMAND_LINE_SIZE in asm-generic is 512, so the
net effect of this change is nil, aside from the cleanup
factor.  See also commit 2b74b8569.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/pci: Pull ppc32 PCI features into common
Kumar Gala [Tue, 25 Aug 2009 16:20:45 +0000]
powerpc/pci: Pull ppc32 PCI features into common

Some of the PCI features we have in ppc32 we will need on ppc64
platforms in the future.  These include support for:

* ppc_md.pci_exclude_device
* indirect config cycles
* early config cycles

We also simplified the logic in fake_pci_bus() to assume it will always
get a valid pci_controller.  Since all current callers seem to pass it
one.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/pci: move pci_64.c device tree scanning code into pci-common.c
Grant Likely [Tue, 25 Aug 2009 20:07:11 +0000]
powerpc/pci: move pci_64.c device tree scanning code into pci-common.c

The PCI device tree scanning code in pci_64.c is some useful functionality.
It allows PCI devices to be described in the device tree instead of being
probed for, which in turn allows pci devices to use all of the device tree
facilities to describe complex PCI bus architectures like GPIO and IRQ
routing (perhaps not a common situation for desktop or server systems,
but useful for embedded systems with on-board PCI devices).

This patch moves the device tree scanning into pci-common.c so it is
available for 32-bit powerpc machines too.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/pci: Remove dead checks for CONFIG_PPC_OF
Grant Likely [Tue, 25 Aug 2009 20:07:02 +0000]
powerpc/pci: Remove dead checks for CONFIG_PPC_OF

PPC_OF is always selected for arch/powerpc.  This patch removes the stale
#defines

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/book3e-64: Add support to initial_tlb_book3e for non-HES TLB
Kumar Gala [Tue, 18 Aug 2009 19:08:33 +0000]
powerpc/book3e-64: Add support to initial_tlb_book3e for non-HES TLB

We now search through TLBnCFG looking for the first array that has IPROT
support (we assume that there is only one).  If that TLB has hardware
entry select (HES) support we use the existing code and with the proper
TLB select (the HES code still needs to clean up bolted entries from
firmware).  The non-HES code is pretty similiar to the 32-bit FSL Book-E
code but does make some new assumtions (like that we have tlbilx) and
simplifies things down a bit.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/book3e-64: Add helper function to setup IVORs
Kumar Gala [Tue, 18 Aug 2009 19:08:32 +0000]
powerpc/book3e-64: Add helper function to setup IVORs

Not all 64-bit Book-3E parts will have fixed IVORs so add a function that
cpusetup code can call to setup the base IVORs (0..15) to match the fixed
offsets.  We need to 'or' part of interrupt_base_book3e into the IVORs
since on parts that have them the IVPR doesn't extend as far down.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/book3e-64: Wait til generic_calibrate_decr to enable decrementer
Kumar Gala [Tue, 18 Aug 2009 19:08:31 +0000]
powerpc/book3e-64: Wait til generic_calibrate_decr to enable decrementer

Match what we do on 32-bit Book-E processors and enable the decrementer
in generic_calibrate_decr.  We need to make sure we disable the
decrementer early in boot since we currently use lazy (soft) interrupt
on 64-bit Book-E and possible get a decrementer exception before we
are ready for it.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/book3e-64: Move the default cpu table entry
Kumar Gala [Tue, 18 Aug 2009 19:08:30 +0000]
powerpc/book3e-64: Move the default cpu table entry

Move the default cpu entry table for CONFIG_PPC_BOOK3E_64 to the
very end since we will probably want to support both 32-bit and
64-bit kernels for some processors that are higher up in the list.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/mm: Add MMU features for TLB reservation & Paired MAS registers
Kumar Gala [Mon, 24 Aug 2009 15:52:48 +0000]
powerpc/mm: Add MMU features for TLB reservation & Paired MAS registers

Support for TLB reservation (or TLB Write Conditional) and Paired MAS
registers are optional for a processor implementation so we handle
them via MMU feature sections.

We currently only used paired MAS registers to access the full RPN + perm
bits that are kept in MAS7||MAS3.  We assume that if an implementation has
hardware page table at this time it also implements in TLB reservations.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Adjust base and index registers in Altivec macros
Michael Wolf [Thu, 20 Aug 2009 13:21:45 +0000]
powerpc: Adjust base and index registers in Altivec macros

On POWER6 systems RA needs to be the base and RB the index.
If they are reversed you take a misdirect hit.

Signed-off-by: Mike Wolf <mjwolf@us.ibm.com>

----
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Name xpn & x fields in HW Hash PTE format
Becky Bruce [Mon, 24 Aug 2009 06:15:36 +0000]
powerpc: Name xpn & x fields in HW Hash PTE format

Previously, the 36-bit code was using these bits, but they had
never been named in the pte format definition.  This patch just
gives those fields their proper names and adds a comment that
they are only present on some processors.

There is no functional code change.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agohvc_console: Add __init and __exit to hvc_vio
Peter Huewe [Thu, 20 Aug 2009 11:14:06 +0000]
hvc_console: Add __init and __exit to hvc_vio

Trivial patch which adds the __init/__exit macros to the module_init/
module_exit functions of char/hvc_vio.c

Please have a look at the small patch and either pull it through
your tree, or please ack' it so Jiri can pull it through the trivial tree.

linux version 2.6.31-rc6 - linus git tree, Do 20. Aug 22:26:06 CEST 2009

Signed-off-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Add CONFIG_DMA_API_DEBUG support
FUJITA Tomonori [Tue, 4 Aug 2009 19:08:28 +0000]
powerpc: Add CONFIG_DMA_API_DEBUG support

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Handle SWIOTLB mapping error properly
FUJITA Tomonori [Tue, 4 Aug 2009 19:08:27 +0000]
powerpc: Handle SWIOTLB mapping error properly

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Use asm-generic/dma-mapping-common.h
FUJITA Tomonori [Tue, 4 Aug 2009 19:08:26 +0000]
powerpc: Use asm-generic/dma-mapping-common.h

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: use dma_map_ops struct
FUJITA Tomonori [Tue, 4 Aug 2009 19:08:25 +0000]
powerpc: use dma_map_ops struct

This converts uses dma_map_ops struct (in include/linux/dma-mapping.h)
instead of POWERPC homegrown dma_mapping_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agodma: Add set_dma_mask hook to struct dma_map_ops
FUJITA Tomonori [Tue, 4 Aug 2009 19:08:24 +0000]
dma: Add set_dma_mask hook to struct dma_map_ops

POWERPC needs this hook. SPARC could use it too.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Remove swiotlb_pci_dma_ops
FUJITA Tomonori [Tue, 4 Aug 2009 19:08:23 +0000]
powerpc: Remove swiotlb_pci_dma_ops

Now swiotlb_pci_dma_ops is identical to swiotlb_dma_ops; we can use
swiotlb_dma_ops with any devices. This removes swiotlb_pci_dma_ops.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Remove addr_needs_map in struct dma_mapping_ops
FUJITA Tomonori [Tue, 4 Aug 2009 19:08:22 +0000]
powerpc: Remove addr_needs_map in struct dma_mapping_ops

This patch adds max_direct_dma_addr to struct dev_archdata to remove
addr_needs_map in struct dma_mapping_ops. It also converts
dma_capable() to use max_direct_dma_addr.

max_direct_dma_addr is initialized in pci_dma_dev_setup_swiotlb(),
called via ppc_md.pci_dma_dev_setup hook.

For further information:
http://marc.info/?t=124719060200001&r=1&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agoMerge commit 'tip/iommu-for-powerpc' into next
Benjamin Herrenschmidt [Fri, 28 Aug 2009 04:23:06 +0000]
Merge commit 'tip/iommu-for-powerpc' into next

10 years agoMerge commit 'kumar/next' into next
Benjamin Herrenschmidt [Thu, 27 Aug 2009 03:13:41 +0000]
Merge commit 'kumar/next' into next

10 years agopowerpc/pseries: Reduce the polling interval in __cpu_up()
Gautham R Shenoy [Tue, 23 Jun 2009 23:26:37 +0000]
powerpc/pseries: Reduce the polling interval in __cpu_up()

Time time taken for a single cpu online operation on a pseries machine
is as follows:
Dedicated LPAR (POWER6): ~220ms.
Shared LPAR (POWER5)   : ~240ms.

Of this time, approximately 200ms is taken up by __cpu_up(). This is because
we poll every 200ms to check if the new cpu has notified it's presence
through the cpu_callin_map. We repeat this operation until the new cpu sets
the value in cpu_callin_map or 5 seconds elapse, whichever comes earlier.

However, using completion_structs instead of polling loops,
the time taken by the new processor to indicate it's presence has
found to be less than 1ms on pseries. This method however may not
work on all powerpc platforms due to the time-base synchronization code.

Keeping this in mind, we could reduce msleep polling interval from
200ms to 1ms while retaining the 5 second timeout.

With this, the time taken for a cpu online operation changes as follows:
Dedicated LPAR (POWER6): 20-25ms.
Shared LPAR (POWER5)   : 60-80ms.

In both these cases, it was found that the code polls through the loop
only once indicating that 1ms is a reasonable value, atleast on pseries.

The code needs testing on other powerpc platforms.

Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Acked-by: Joel Schopp <jschopp@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Remove SMP warning from PowerMac cpufreq
Bastian Blank [Wed, 12 Aug 2009 23:30:45 +0000]
powerpc: Remove SMP warning from PowerMac cpufreq

On Thu, Aug 13, 2009 at 04:14:58PM +1000, Benjamin Herrenschmidt wrote:
> On Tue, 2009-08-11 at 11:39 +0200, Bastian Blank wrote:
> > This patch just disables this driver on SMP kernels, as it is obviously
> > not supported.
> Why not remove the #error instead ? :-) I don't think it's still
> meaningful, especially since we use the timebase for delays nowadays
> which doesn't depend on the CPU frequency...

Your call. Take this one:

The build of a PowerMac 32bit kernel currently fails with

error: #warning "WARNING, CPUFREQ not recommended on SMP kernels"

Thie patch removes the not longer applicable SMP warning from the
PowerMac cpufreq code.

Signed-off-by: Bastian Blank <waldi@debian.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc: Fix __flush_icache_range on 44x
Josh Boyer [Wed, 19 Aug 2009 04:27:53 +0000]
powerpc: Fix __flush_icache_range on 44x

The ptrace POKETEXT interface allows a process to modify the text pages of
a child process being ptraced, usually to insert breakpoints via trap
instructions.  The kernel eventually calls copy_to_user_page, which in turn
calls __flush_icache_range to invalidate the icache lines for the child
process.

However, this function does not work on 44x due to the icache being virtually
indexed.  This was noticed by a breakpoint being triggered after it had been
cleared by ltrace on a 440EPx board.  The convenient solution is to do a
flash invalidate of the icache in the __flush_icache_range function.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agopowerpc/mm: Cleanup handling of execute permission
Benjamin Herrenschmidt [Tue, 18 Aug 2009 19:00:34 +0000]
powerpc/mm: Cleanup handling of execute permission

This is an attempt at cleaning up a bit the way we handle execute
permission on powerpc. _PAGE_HWEXEC is gone, _PAGE_EXEC is now only
defined by CPUs that can do something with it, and the myriad of
#ifdef's in the I$/D$ coherency code is reduced to 2 cases that
hopefully should cover everything.

The logic on BookE is a little bit different than what it was though
not by much. Since now, _PAGE_EXEC will be set by the generic code
for executable pages, we need to filter out if they are unclean and
recover it. However, I don't expect the code to be more bloated than
it already was in that area due to that change.

I could boast that this brings proper enforcing of per-page execute
permissions to all BookE and 40x but in fact, we've had that now for
some time as a side effect of my previous rework in that area (and
I didn't even know it :-) We would only enable execute permission if
the page was cache clean and we would only cache clean it if we took
and exec fault. Since we now enforce that the later only work if
VM_EXEC is part of the VMA flags, we de-fact already enforce per-page
execute permissions... Unless I missed something

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

10 years agoMerge commit 'origin/master' into next
Benjamin Herrenschmidt [Thu, 27 Aug 2009 03:12:40 +0000]
Merge commit 'origin/master' into next

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 26 Aug 2009 04:24:49 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  irda/sa1100_ir: fix broken netdev_ops conversion
  irda/au1k_ir: fix broken netdev_ops conversion
  pkt_sched: Fix bogon in tasklet_hrtimer changes.

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 26 Aug 2009 04:24:26 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Validate linear D-TLB misses.
  sparc64: Update defconfig.
  sparc32: Update defconfig.
  sparc32: Kill trap table freeing code.
  sparc: sys32.S incorrect compat-layer splice() system call
  sparc: Use page_fault_out_of_memory() for VM_FAULT_OOM.
  sparc64: Sign extend length arg to truncate syscalls when compat.
  sparc: Fix cleanup crash in bbc_envctrl_cleanup()

10 years agoirda/sa1100_ir: fix broken netdev_ops conversion
Alexander Beregalov [Wed, 26 Aug 2009 03:39:37 +0000]
irda/sa1100_ir: fix broken netdev_ops conversion

This patch is based on commit d2f3ad4 (pxaficp-ir: remove incorrect
net_device_ops). Do the same for sa1100_ir.
Untested.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoirda/au1k_ir: fix broken netdev_ops conversion
Alexander Beregalov [Wed, 26 Aug 2009 03:39:18 +0000]
irda/au1k_ir: fix broken netdev_ops conversion

This patch is based on commit d2f3ad4 (pxaficp-ir: remove incorrect
net_device_ops). Do the same for au1k_ir.
Untested.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agopowerpc/qe_lib: Set gpio data before changing the direction to output
Michael Barkowski [Tue, 18 Aug 2009 21:20:44 +0000]
powerpc/qe_lib: Set gpio data before changing the direction to output

This avoids having a short glitch if the desired initial value is not
the same as what was previously in the data register.

Signed-off-by: Michael Barkowski <michaelbarkowski@ruggedcom.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agosparc64: Validate linear D-TLB misses.
David S. Miller [Tue, 25 Aug 2009 23:47:46 +0000]
sparc64: Validate linear D-TLB misses.

When page alloc debugging is not enabled, we essentially accept any
virtual address for linear kernel TLB misses.  But with kgdb, kernel
address probing, and other facilities we can try to access arbitrary
crap.

So, make sure the address we miss on will translate to physical memory
that actually exists.

In order to make this work we have to embed the valid address bitmap
into the kernel image.  And in order to make that less expensive we
make an adjustment, in that the max physical memory address is
decreased to "1 << 41", even on the chips that support a 42-bit
physical address space.  We can do this because bit 41 indicates
"I/O space" and thus covers non-memory ranges.

The result of this is that:

1) kpte_linear_bitmap shrinks from 2K to 1K in size

2) we need 64K more for the valid address bitmap

We can't let the valid address bitmap be dynamically allocated
once we start using it to validate TLB misses, otherwise we have
crazy issues to deal with wrt. recursive TLB misses and such.

If we're in a TLB miss it could be the deepest trap level that's legal
inside of the cpu.  So if we TLB miss referencing the bitmap, the cpu
will be out of trap levels and enter RED state.

To guard against out-of-range accesses to the bitmap, we have to check
to make sure no bits in the physical address above bit 40 are set.  We
could export and use last_valid_pfn for this check, but that's just an
unnecessary extra memory reference.

On the plus side of all this, since we load all of these translations
into the special 4MB mapping TSB, and we check the TSB first for TLB
misses, there should be absolutely no real cost for these new checks
in the TLB miss path.

Reported-by: heyongli@gmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoMerge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Tue, 25 Aug 2009 18:24:37 +0000]
Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter: Fix typo in read() output generation
  perf tools: Check perf.data owner

10 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 25 Aug 2009 18:24:24 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  dma-debug: Fix check_unmap null pointer dereference

10 years agoMerge branch 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 25 Aug 2009 18:24:04 +0000]
Merge branch 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  clockevent: Prevent dead lock on clockevents_lock
  timers: Drop write permission on /proc/timer_list

10 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 25 Aug 2009 18:23:43 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix too large stack usage in do_one_initcall()
  tracing: handle broken names in ftrace filter
  ftrace: Unify effect of writing to trace_options and option/*

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 25 Aug 2009 18:23:25 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix build with older binutils and consolidate linker script
  x86: Fix an incorrect argument of reserve_bootmem()
  x86: add vmlinux.lds to targets in arch/x86/boot/compressed/Makefile
  xen: rearrange things to fix stackprotector
  x86: make sure load_percpu_segment has no stackprotector
  i386: Fix section mismatches for init code with !HOTPLUG_CPU
  x86, pat: Allow ISA memory range uncacheable mapping requests

10 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Tue, 25 Aug 2009 16:47:36 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  ext3: Improve error message that changing journaling mode on remount is not possible
  ext3: Update Kconfig description of EXT3_DEFAULTS_TO_ORDERED

10 years agoMerge branch 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Tue, 25 Aug 2009 16:47:06 +0000]
Merge branch 'fix/misc' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/misc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: pcm_lib: fix unsorted list constraint handling
  sound: vx222: fix input level control range check
  ALSA: ali5451: fix timeout handling in snd_ali_{codecs,timer}_ready()

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Tue, 25 Aug 2009 16:30:58 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] ar7_wdt: fix path to ar7-specific headers

10 years agotty: make sure to flush any pending work when halting the ldisc
Linus Torvalds [Tue, 25 Aug 2009 16:12:43 +0000]
tty: make sure to flush any pending work when halting the ldisc

When I rewrote tty ldisc code to use proper reference counts (commits
65b770468e98 and cbe9352fa08f) in order to avoid a race with hangup, the
test-program that Eric Biederman used to trigger the original problem
seems to have exposed another long-standing bug: the hangup code did the
'tty_ldisc_halt()' to stop any buffer flushing activity, but unlike the
other call sites it never actually flushed any pending work.

As a result, if you get just the right timing, the pending work may be
just about to execute (ie the timer has already triggered and thus
cancel_delayed_work() was a no-op), when we then re-initialize the ldisc
from under it.

That, in turn, results in various random problems, usually seen as a
NULL pointer dereference in run_timer_softirq() or a BUG() in
worker_thread (but it can be almost anything).

Fix it by adding the required 'flush_scheduled_work()' after doing the
tty_ldisc_halt() (this also requires us to move the ldisc halt to before
taking the ldisc mutex in order to avoid a deadlock with the workqueue
executing do_tty_hangup, which requires the mutex).

The locking should be cleaned up one day (the requirement to do this
outside the ldisc_mutex is very annoying, and weakens the lock), but
that's a larger and separate undertaking.

Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Tested-by: Xiaotian Feng <xtfeng@gmail.com>
Tested-by: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Tested-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agopowerpc/85xx: Add QE USB support for MPC8569E-MDS boards
Anton Vorontsov [Tue, 18 Aug 2009 23:28:21 +0000]
powerpc/85xx: Add QE USB support for MPC8569E-MDS boards

- Add gpio-controller node for BCSR17, it is used to control USB
  speed and VBUS;
- Add timer node for QE GTM, needed for USB host;
- Add usb node itself;
- Add some probing code for BCSR GPIOs.

NOTE: QE USB doesn't work on prototype boards, but should work on
      pilot boards if specs and schematics are correct, though we
      don't have the pilot boards to actually test it.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards
Anton Vorontsov [Tue, 18 Aug 2009 23:28:17 +0000]
powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards

- Add usb node;
- Configure pins and clocks;
- Enable USB function in BCSR.

The support was successfully tested using serial and ethernet gadget
drivers.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/82xx: Fix BCSR bits for MPC8272ADS boards
Anton Vorontsov [Tue, 18 Aug 2009 23:28:10 +0000]
powerpc/82xx: Fix BCSR bits for MPC8272ADS boards

mpc8272_ads.c is using BCSR bits definitions from pq2ads.h, but
according to User's Guide the bits are wrong for MPC8272ADS boards
(I guess definitions from pq2ads should only be used for PQ2FADS
boards).

So, let's introduce our own definitions for MPC8272ADS, and don't
include pq2ads.h.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/85xx: Add eSDHC support for MPC8536DS boards
Anton Vorontsov [Tue, 18 Aug 2009 23:38:18 +0000]
powerpc/85xx: Add eSDHC support for MPC8536DS boards

This patch simply adds sdhci node to the device tree.

We specify clock-frequency manually, so that eSDHC will work without
upgrading U-Boot. Though, that'll only work for default setup (1500
MHz) on new board revisions. For non-default setups, it's recommended
to upgrade U-Boot, since it will fixup clock-frequency automatically.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agox86: Fix build with older binutils and consolidate linker script
Jan Beulich [Tue, 25 Aug 2009 13:50:53 +0000]
x86: Fix build with older binutils and consolidate linker script

binutils prior to 2.17 can't deal with the currently possible
situation of a new segment following the per-CPU segment, but
that new segment being empty - objcopy misplaces the .bss (and
perhaps also the .brk) sections outside of any segment.

However, the current ordering of sections really just appears
to be the effect of cumulative unrelated changes; re-ordering
things allows to easily guarantee that the segment following
the per-CPU one is non-empty, and at once eliminates the need
for the bogus data.init2 segment.

Once touching this code, also use the various data section
helper macros from include/asm-generic/vmlinux.lds.h.

-v2: fix !SMP builds.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: <sam@ravnborg.org>
LKML-Reference: <4A94085D02000078000119A5@vpn.id2.novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agosound: pcm_lib: fix unsorted list constraint handling
Clemens Ladisch [Tue, 25 Aug 2009 06:15:41 +0000]
sound: pcm_lib: fix unsorted list constraint handling

snd_interval_list() expected a sorted list but did not document this, so
there are drivers that give it an unsorted list.  To fix this, change
the algorithm to work with any list.

This fixes the "Slave PCM not usable" error with USB devices that have
multiple alternate settings with sample rates in decreasing order, such
as the Philips Askey VC010 WebCam.

http://bugzilla.kernel.org/show_bug.cgi?id=14028

Reported-and-tested-by: Andrzej <adkadk@gmail.com>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agopkt_sched: Fix bogon in tasklet_hrtimer changes.
David S. Miller [Tue, 25 Aug 2009 02:37:05 +0000]
pkt_sched: Fix bogon in tasklet_hrtimer changes.

Reported by Stephen Rothwell, luckily it's harmless:

net/sched/sch_api.c: In function 'qdisc_watchdog':
net/sched/sch_api.c:460: warning: initialization from incompatible pointer type
net/sched/sch_cbq.c: In function 'cbq_undelay':
net/sched/sch_cbq.c:595: warning: initialization from incompatible pointer type

Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agopowerpc/85xx: sbc8560 - remove "has-rstcr" from global utilities block
Paul Gortmaker [Fri, 14 Aug 2009 16:13:54 +0000]
powerpc/85xx: sbc8560 - remove "has-rstcr" from global utilities block

The earlier mpc8560 CPUs don't have the RSTCR at 0xe00b0
in the GUTS.  The generic reboot code uses this tag to
determine if it should be using the RSTCR for reboot, so
remove it from the board definition.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/85xx: issue fsl_soc reboot warning only when applicable
Paul Gortmaker [Fri, 14 Aug 2009 16:13:53 +0000]
powerpc/85xx: issue fsl_soc reboot warning only when applicable

Some CPU, like the MPC8560 don't have a RSTCR in the Global
Utilities Block.  These boards will implement their own reboot
call, and not use this code, so we should only warn about the
absence of the GUTS RSTCR when the default reboot code is used.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/85xx: sbc8560 - Fix warm reboot with board specific reset function
Liang Li [Fri, 14 Aug 2009 14:36:14 +0000]
powerpc/85xx: sbc8560 - Fix warm reboot with board specific reset function

The existing fsl_rstcr_restart function is not applicable to the
mpc8560. The Global Utilities Block on this earlier CPU doesn't have
the control/reset register at 0xe00b0.  This implements a board
specific reset function that uses the RCR(Reset Control Register) of
the sbc8560's EPLD to do a reset.

Signed-off-by: Liang Li <Liang.Li@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/83xx: sbc8349 - update defconfig, enable MTD, USB storage
Paul Gortmaker [Wed, 12 Aug 2009 13:34:31 +0000]
powerpc/83xx: sbc8349 - update defconfig, enable MTD, USB storage

With flash partition entries in the DTS file, MTD might as well
be enabled in the defconfig.  In a similar vein, enable USB and
enough related options (SCSI/ext2/ext3) so that a user can read
and write to a generic USB flash drive as well.

Also, this board only has the two default SOC UARTs, so adjust the
UART config accordingly.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/83xx: Fix incorrect PCI interrupt map in SBC834x DTS
Liang Li [Wed, 12 Aug 2009 13:34:30 +0000]
powerpc/83xx: Fix incorrect PCI interrupt map in SBC834x DTS

Allows interrupts to occur on the sbc834x. Currently PCI devices
get assigned an incorrect IRQ and so the interrupt count never
increases. This was tested with the 82546GB based dual port E1000
PCI-X NIC which uses two distinct IRQ lines on the one card.

root@localhost:/root> cat /proc/interrupts | grep eth
17:         78   IPIC   Level     eth1
48:      27121   IPIC   Level     eth0

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/83xx: Add localbus node and MTD partitions for SBC834x
Liang Li [Wed, 12 Aug 2009 13:34:29 +0000]
powerpc/83xx: Add localbus node and MTD partitions for SBC834x

There is 8MB flash, 8kB EEPROM and 128MB SDRAM on the sbc834x
local bus, so add a localbus node in DTS with MTD partitions.

The recent U-boot commit fe613cdd4eb moves u-boot to the beginning
of flash, hence the legacy label on the partition at the end of flash.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/83xx: Remove second USB node from SBC834x DTS
Liang Li [Wed, 12 Aug 2009 13:34:28 +0000]
powerpc/83xx: Remove second USB node from SBC834x DTS

Since only one of the SoC USB devices is brought out to a physical
connector on the board, remove the 2nd (USB-DR) node from the DTS.
Having it present and USB enabled will cause a hang at boot.

Signed-off-by: Liang Li <liang.li@windriver.com>
Signed-off-by: Yang Shi <yang.shi@windriver.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/85xx: Add support for P2020RDB board
Poonam Aggrwal [Fri, 7 Aug 2009 15:35:16 +0000]
powerpc/85xx: Add support for P2020RDB board

Add support for the P2020RDB reference board from Freescale.

Overview of P2020RDB platform
- DDR
  DDR2 1G
- NOR Flash
  16MByte
- NAND Flash
  32MByte
- 3 Ethernet interfaces
  1) etSEC1
- RGMII
- connected to a 5 port Vitesse Switch(VSC7385)
- Switch is memory mapped through eLBC interface(CS#2)
- IRQ1
  2) etSEC2
- SGMII
- connected to VSC8221
- IRQ2
  3) etSEC3
- RGMII
- connected to VSC8641
- IRQ3
- 2 1X PCIe interfaces
- SD/MMC ,USB
- SPI EEPROM
- Serial I2C EEPROM

Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/booke: Move MMUCSR definition into mmu-book3e.h
Kumar Gala [Fri, 14 Aug 2009 14:38:34 +0000]
powerpc/booke: Move MMUCSR definition into mmu-book3e.h

The MMUCSR is now defined as part of the Book-3E architecture so we
can move it into mmu-book3e.h and add some of the additional bits
defined by the architecture specs.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agopowerpc/82xx: mgcoge - updated defconfig
Heiko Schocher [Fri, 7 Aug 2009 06:41:15 +0000]
powerpc/82xx: mgcoge - updated defconfig

- add I2C support
- add FCC1 and FCC2 support

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

10 years agoNFSv4: Fix an infinite looping problem with the nfs4_state_manager
Trond Myklebust [Mon, 24 Aug 2009 23:21:29 +0000]
NFSv4: Fix an infinite looping problem with the nfs4_state_manager

Commit 76db6d9500caeaa774a3e32a997eba30bbdc176b (nfs41: add session setup
to the state manager) introduces an infinite loop possibility in the NFSv4
state manager. By first checking nfs4_has_session() before clearing the
NFS4CLNT_SESSION_SETUP flag, it allows for a situation where someone sets
that flag, but it never gets cleared, and so the state manager loops.

In fact commit c3fad1b1aaf850bf692642642ace7cd0d64af0a3 (nfs41: add session
reset to state manager) causes this to happen every time we get a network
partition error.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Mon, 24 Aug 2009 21:41:28 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2/dlm: Wait on lockres instead of erroring cancel requests
  ocfs2: Add missing lock name
  ocfs2: Don't oops in ocfs2_kill_sb on a failed mount
  ocfs2: release the buffer head in ocfs2_do_truncate.
  ocfs2: Handle quota file corruption more gracefully

10 years agoMerge branch 'fixes' of git://git.marvell.com/orion
Linus Torvalds [Mon, 24 Aug 2009 19:53:45 +0000]
Merge branch 'fixes' of git://git.marvell.com/orion

* 'fixes' of git://git.marvell.com/orion:
  [ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop
  [ARM] Kirkwood: enable eSATA on QNAP TS-219P
  [ARM] Kirkwood: __init requires linux/init.h

10 years agomm: fix hugetlb bug due to user_shm_unlock call
Hugh Dickins [Mon, 24 Aug 2009 15:30:28 +0000]
mm: fix hugetlb bug due to user_shm_unlock call

2.6.30's commit 8a0bdec194c21c8fdef840989d0d7b742bb5d4bc removed
user_shm_lock() calls in hugetlb_file_setup() but left the
user_shm_unlock call in shm_destroy().

In detail:
Assume that can_do_hugetlb_shm() returns true and hence user_shm_lock()
is not called in hugetlb_file_setup(). However, user_shm_unlock() is
called in any case in shm_destroy() and in the following
atomic_dec_and_lock(&up->__count) in free_uid() is executed and if
up->__count gets zero, also cleanup_user_struct() is scheduled.

Note that sched_destroy_user() is empty if CONFIG_USER_SCHED is not set.
However, the ref counter up->__count gets unexpectedly non-positive and
the corresponding structs are freed even though there are live
references to them, resulting in a kernel oops after a lots of
shmget(SHM_HUGETLB)/shmctl(IPC_RMID) cycles and CONFIG_USER_SCHED set.

Hugh changed Stefan's suggested patch: can_do_hugetlb_shm() at the
time of shm_destroy() may give a different answer from at the time
of hugetlb_file_setup().  And fixed newseg()'s no_id error path,
which has missed user_shm_unlock() ever since it came in 2.6.9.

Reported-by: Stefan Huber <shuber2@gmail.com>
Signed-off-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Tested-by: Stefan Huber <shuber2@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Mon, 24 Aug 2009 19:48:41 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: Fix radeon_gem_busy_ioctl harder.

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6
Linus Torvalds [Mon, 24 Aug 2009 19:26:48 +0000]
Merge git://git./linux/kernel/git/hskinnemoen/avr32-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/avr32-2.6:
  favr32: improve touchscreen response
  avr32/lib: fix unaligned memcpy where len < 4
  avr32/lib: fix unaligned memcpy()

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 24 Aug 2009 19:25:27 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ucb1400_ts - enable interrupt unconditionally
  Input: ucb1400_ts - enable ADC Filter
  Input: wacom - don't use on-stack memory for report buffers
  Input: iforce - support new revision of ACT LABS Force RS
  Input: joydev - decouple axis and button map ioctls from input constants

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 24 Aug 2009 19:25:03 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  smc91x: let smc91x work well under netpoll
  pxaficp-ir: remove incorrect net_device_ops
  NET: llc, zero sockaddr_llc struct
  drivers/net: fixed drivers that support netpoll use ndo_start_xmit()
  netpoll: warning for ndo_start_xmit returns with interrupts enabled
  net: Fix Micrel KSZ8842 Kconfig description
  netfilter: xt_quota: fix wrong return value (error case)
  ipv6: Fix commit 63d9950b08184e6531adceb65f64b429909cc101 (ipv6: Make v4-mapped bindings consistent with IPv4)
  E100: fix interaction with swiotlb on X86.
  pkt_sched: Convert CBQ to tasklet_hrtimer.
  pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer
  rtl8187: always set MSR_LINK_ENEDCA flag with RTL8187B
  ibm_newemac: emac_close() needs to call netif_carrier_off()
  net: fix ks8851 build errors
  net: Rename MAC platform driver for w90p910 platform
  yellowfin: Fix buffer underrun after dev_alloc_skb() failure
  orinoco: correct key bounds check in orinoco_hw_get_tkip_iv
  mac80211: fix todo lock

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Mon, 24 Aug 2009 19:24:01 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  ima: hashing large files bug fix
  kernel_read: redefine offset type

10 years agox86: Fix an incorrect argument of reserve_bootmem()
Amerigo Wang [Fri, 21 Aug 2009 08:34:45 +0000]
x86: Fix an incorrect argument of reserve_bootmem()

This line looks suspicious, because if this is true, then the
'flags' parameter of function reserve_bootmem_generic() will be
unused when !CONFIG_NUMA. I don't think this is what we want.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: akpm@linux-foundation.org
LKML-Reference: <20090821083709.5098.52505.sendpatchset@localhost.localdomain>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years ago[ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop
Simon Kagstrom [Thu, 20 Aug 2009 07:19:53 +0000]
[ARM] Orion NAND: Make asm volatile avoid GCC pushing ldrd out of the loop

GCC 4.3.3 and 4.4.1 happily moves the dword load instruction out of the
loop in orion_nand_read_buf. This patch makes the instruction volatile
to avoid the issue. I've discussed this at gcc-help, refer to the thread
at

  http://gcc.gnu.org/ml/gcc-help/2009-08/msg00187.html

The early clobber is added to avoid the destination registers and the
source register overlapping.

Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

10 years ago[ARM] Kirkwood: enable eSATA on QNAP TS-219P
John Holland [Wed, 19 Aug 2009 23:24:03 +0000]
[ARM] Kirkwood: enable eSATA on QNAP TS-219P

Initialize PCI/PCIe on the QNAP TS-119, TS-219 and TS-219P hardware
allowing the use of the discrete eSATA controller connected to the PCIe
bus in the TS-219P.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Tested-by: Thomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

10 years ago[ARM] Kirkwood: __init requires linux/init.h
Martin Michlmayr [Tue, 18 Aug 2009 09:34:10 +0000]
[ARM] Kirkwood: __init requires linux/init.h

Include linux/init.h for __init to fix this error:

CC [M] drivers/net/wireless/wl12xx/boot.o
In file included from arch/arm/mach-kirkwood/include/mach/gpio.h:13,
                 from arch/arm/include/asm/gpio.h:5,
                 from include/linux/gpio.h:7,
                 from drivers/net/wireless/wl12xx/boot.c:24:
arch/arm/plat-orion/include/plat/gpio.h:32: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘orion_gpio_init’
make[6]: *** [drivers/net/wireless/wl12xx/boot.o] Error 1
make[5]: *** [drivers/net/wireless/wl12xx] Error 2

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

10 years agoext3: Improve error message that changing journaling mode on remount is not possible
Jan Kara [Mon, 24 Aug 2009 14:38:43 +0000]
ext3: Improve error message that changing journaling mode on remount is not possible

This patch makes the error message about changing journaling mode on remount
more descriptive. Some people are going to hit this error now due to commit
bbae8bcc49bc4d002221dab52c79a50a82e7cd1f if they configure a kernel to default
to data=writeback mode. The problem happens if they have data=ordered set for
the root filesystem in /etc/fstab but not in the kernel command line (and they
don't use initrd). Their filesystem then gets mounted as data=writeback by
kernel but then their boot fails because init scripts won't be able to remount
the filesystem rw. Better error message will hopefully make it easier for them
to find the error in their setup and bother us less with error reports :).

Signed-off-by: Jan Kara <jack@suse.cz>

10 years agoext3: Update Kconfig description of EXT3_DEFAULTS_TO_ORDERED
Theodore Ts'o [Mon, 10 Aug 2009 20:03:43 +0000]
ext3: Update Kconfig description of EXT3_DEFAULTS_TO_ORDERED

The old description for this configuration option was perhaps not
completely balanced in terms of describing the tradeoffs of using a
default of data=writeback vs. data=ordered.  Despite the fact that old
description very strongly recomended disabling this feature, all of
the major distributions have elected to preserve the existing 'legacy'
default, which is a strong hint that it perhaps wasn't telling the
whole story.

This revised description has been vetted by a number of ext3
developers as being better at informing the user about the tradeoffs
of enabling or disabling this configuration feature.

Cc: linux-ext4@vger.kernel.org
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Jan Kara <jack@suse.cz>

10 years agosound: vx222: fix input level control range check
Clemens Ladisch [Mon, 24 Aug 2009 07:11:58 +0000]
sound: vx222: fix input level control range check

Fix a logic error in the range check of the input level control that
would prevent setting any volume less than the maximum.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

10 years agosmc91x: let smc91x work well under netpoll
Dongdong Deng [Mon, 24 Aug 2009 05:59:04 +0000]
smc91x: let smc91x work well under netpoll

The NETPOLL requires that interrupts remain disabled in its callbacks.

Using *_irq_save()/irq_restore() to replace *_irq_disable()/irq_enable()
functions in NETPOLL's callbacks of smc91x, so that it doesn't enable
interrupts when already disabled, and kgdboe/netconsole would work
properly over smc91x.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Acked-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agopxaficp-ir: remove incorrect net_device_ops
Marek Vasut [Mon, 24 Aug 2009 05:57:30 +0000]
pxaficp-ir: remove incorrect net_device_ops

This patch fixes broken pxaficp-ir. The problem was in incorrect
net_device_ops being specified which prevented the driver from
operating. The symptoms were:
 - failing ifconfig for IrLAN, resulting in
SIOCSIFFLAGS: Cannot assign requested address
 - irattach working for IrCOMM, but the port stayed disabled

Moreover this patch corrects missing sysfs device link.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoNET: llc, zero sockaddr_llc struct
Jiri Slaby [Mon, 24 Aug 2009 05:55:51 +0000]
NET: llc, zero sockaddr_llc struct

sllc_arphrd member of sockaddr_llc might not be changed. Zero sllc
before copying to the above layer's structure.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoima: hashing large files bug fix
Mimi Zohar [Fri, 21 Aug 2009 18:32:49 +0000]
ima: hashing large files bug fix

Hashing files larger than INT_MAX causes process to loop.
Dependent on redefining kernel_read() offset type to loff_t.

(http://bugzilla.kernel.org/show_bug.cgi?id=13909)

Cc: stable@kernel.org
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>

10 years agokernel_read: redefine offset type
Mimi Zohar [Fri, 21 Aug 2009 18:32:48 +0000]
kernel_read: redefine offset type

vfs_read() offset is defined as loff_t, but kernel_read()
offset is only defined as unsigned long. Redefine
kernel_read() offset as loff_t.

Cc: stable@kernel.org
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>