9 years agoktest: Updated the sample.conf for the latest options
Steven Rostedt [Mon, 8 Nov 2010 22:41:37 +0000]
ktest: Updated the sample.conf for the latest options

Added documentation for SSH_EXEC, SCP_TO_TARGET, REBOOT,
and CONFIG_BISECT and friends.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Added compare script to test ktest.pl to sample.conf
Steven Rostedt [Mon, 8 Nov 2010 22:18:37 +0000]
ktest: Added compare script to test ktest.pl to sample.conf

Add a compare script that makes sure that all the options in
sample.conf are used in ktest.pl, and all the options in
ktest.pl are described in sample.conf.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Added config_bisect test type
Steven Rostedt [Mon, 8 Nov 2010 16:14:10 +0000]
ktest: Added config_bisect test type

Added the ability to do a config_bisect. It starts with a bad
config and does the following loop.

Enable half the configs.
if none of the configs to check are not enabled
 (caused by missing dependencies) enable the other half.
Run the test
if the test passes, remove the configs from the check
  but enabled them for further tests (to satisfy
  dependencies).
else
  Remove any config that was not enabled, as we have found
  a new config that can cause a failure.
loop till we have only one config left.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest/cleanups: Added version 0.2, ssh as options
Steven Rostedt [Tue, 2 Nov 2010 18:35:37 +0000]
ktest/cleanups: Added version 0.2, ssh as options

Updated to version 0.2.

Now have SSH_EXEC options.

Also added some cleanups for keeping track of success and
reading the config file.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Output something easy to parse for failure or success
Steven Rostedt [Mon, 8 Nov 2010 21:49:25 +0000]
ktest: Output something easy to parse for failure or success

Have a easy way to parse the log file for success or failure.

 KTEST RESULT: ...

Suggested-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Allow a test case to undefine a default value
Steven Rostedt [Mon, 8 Nov 2010 21:45:50 +0000]
ktest: Allow a test case to undefine a default value

Allow a test case in the config file to undefine a default
value by specifying the option and equal sign but not assigning
it a value:

  OPTION =

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Use $output_config instead of typing $outputdir/.config
Steven Rostedt [Mon, 8 Nov 2010 21:43:21 +0000]
ktest: Use $output_config instead of typing $outputdir/.config

To help prevent typos, use $output_config as the reference to
"$outputdir/.config".

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Write to stdout if no log file is given
Steven Rostedt [Mon, 8 Nov 2010 21:39:57 +0000]
ktest: Write to stdout if no log file is given

If no LOG_FILE option is set, then write what would be logged to
that file to standard output.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Use oldnoconfig instead of yes command
Steven Rostedt [Mon, 8 Nov 2010 21:35:48 +0000]
ktest: Use oldnoconfig instead of yes command

Running the command "yes ''" through the make oldconfig may enable
things we do not want enabled. If something is default enabled, the
yes command with '' as an argument will enable it.

Use oldnoconfig, which runs everything as if 'no' was used.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Update the sample config file with more documentation
Steven Rostedt [Tue, 2 Nov 2010 19:22:53 +0000]
ktest: Update the sample config file with more documentation

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: New TEST_START instead of using [], and use real SHA1s
Steven Rostedt [Tue, 2 Nov 2010 19:13:54 +0000]
ktest: New TEST_START instead of using [], and use real SHA1s

Change the config to use TEST_START where the options after a
TEST_START automatically get the [] as it is read and they do
not need to exist in the config file;

TEST_START
MIN_CONFIG = myconfig

is the same as

MIN_CONFIG[1] = myconfig

The benefit is that you no longer need to keep track of test numbers
with tests.

Also process the commit ids that are passed to the options
to get the actually SHA1 so it is no longer relative to the branch.
Ie, saying HEAD will get the current SHA1 and then that will
be used, and will work even if another branch is checked out.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Add poweroff after halt and powercycle after reboot
Steven Rostedt [Tue, 2 Nov 2010 18:58:38 +0000]
ktest: Add poweroff after halt and powercycle after reboot

Added the options POWEROFF_AFTER_HALT to handle boxes that do not
really shut off after a halt is called.

Added POWERCYCLE_AFTER_REBOOT to force a power cycle for boxes that
don't reboot but get stuck during the reboot.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Add POST_INSTALL to allow initrds to be created
Steven Rostedt [Tue, 2 Nov 2010 18:58:33 +0000]
ktest: Add POST_INSTALL to allow initrds to be created

Add a POST_INSTALL option that runs after the build and install
but before rebooting to the test kernel. This alls the user to
run a script that will install an initrd (or anything else that may
be special) before booting.

An environment variable KERNEL_VERSION is set.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Added sample.conf, new %default option format
Steven Rostedt [Tue, 2 Nov 2010 18:58:27 +0000]
ktest: Added sample.conf, new %default option format

Added sample.conf as a nice document to show new users.

Use a %default hash to separate out the options that are default
and allow us to complain about options being set twice.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Add open and close console and start stop monitor
Steven Rostedt [Tue, 2 Nov 2010 18:58:22 +0000]
ktest: Add open and close console and start stop monitor

It is much better to keep the monitor running throughout a
test than to constantly start and stop it. Some console readers
will show everything that has happened before when opening the
console, and by opening it several times, causes the old content to
be read multiple times in a single test.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Added continuing on success, clear log and timeout
Steven Rostedt [Tue, 2 Nov 2010 18:58:15 +0000]
ktest: Added continuing on success, clear log and timeout

Add option to continue after a test fails.

Add option to reset the log at start of running ktest.

Update default timeout to 2 minutes.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Add reverse bisect, better logging, copyright
Steven Rostedt [Tue, 2 Nov 2010 18:58:05 +0000]
ktest: Add reverse bisect, better logging, copyright

Added the ability to do a reverse bisect.

Better logging of running commands.

Added the copyright statement.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Added patchcheck
Steven Rostedt [Tue, 2 Nov 2010 18:57:58 +0000]
ktest: Added patchcheck

Added patchcheck functionality. It will checkout a given SHA1
and test that commit and all commits to another given SHA1.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Added reboot on success
Steven Rostedt [Tue, 2 Nov 2010 18:57:51 +0000]
ktest: Added reboot on success

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Added better console, add test build
Steven Rostedt [Tue, 2 Nov 2010 18:57:43 +0000]
ktest: Added better console, add test build

Better reading of the console.

Added running a script to do testing after build succeeds.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: Bisecting, install modules, add logging
Steven Rostedt [Tue, 2 Nov 2010 18:57:33 +0000]
ktest: Bisecting, install modules, add logging

Added bisecting, modules, logging of the output.
Banners that show success.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: New features reboot on error, make options
Steven Rostedt [Tue, 2 Nov 2010 18:57:21 +0000]
ktest: New features reboot on error, make options

REBOOT_ON_ERROR to reboot the box on error

BUILD_OPTIONS to add options to the make build (like -j40)

Added "useconfig:<config>".

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoktest: New features: noclean, dodie, poweroff on error and success
Steven Rostedt [Tue, 2 Nov 2010 18:57:01 +0000]
ktest: New features: noclean, dodie, poweroff on error and success

Added dodie function to have a bit more control over die calls.

BUILD_NOCLEAN to not run make mrproper or remove .config.

POWEROFF_ON_{SUCCESS,ERROR} to turn off the power after tests.

Skip backtrace calls that were done by the backtrace tests.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoInitial start of ktest.pl
Steven Rostedt [Tue, 2 Nov 2010 19:01:32 +0000]
Initial start of ktest.pl

Originally named autotest.pl, but renamed to ktest.pl now because
the autotest name is used by other projects.

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Tue, 9 Nov 2010 18:34:48 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix a memleak in cifs_setattr_nounix()
  cifs: make cifs_ioctl handle NULL filp->private_data correctly

9 years agoperf_events: Fix perf_counter_mmap() hook in mprotect()
Pekka Enberg [Mon, 8 Nov 2010 19:29:07 +0000]
perf_events: Fix perf_counter_mmap() hook in mprotect()

As pointed out by Linus, commit dab5855 ("perf_counter: Add mmap event hooks to
mprotect()") is fundamentally wrong as mprotect_fixup() can free 'vma' due to
merging. Fix the problem by moving perf_event_mmap() hook to
mprotect_fixup().

Note: there's another successful return path from mprotect_fixup() if old
flags equal to new flags. We don't, however, need to call
perf_event_mmap() there because 'perf' already knows the VMA is
executable.

Reported-by: Dave Jones <davej@redhat.com>
Analyzed-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocifs: fix a memleak in cifs_setattr_nounix()
Suresh Jayaraman [Tue, 9 Nov 2010 06:57:41 +0000]
cifs: fix a memleak in cifs_setattr_nounix()

Andrew Hendry reported a kmemleak warning in 2.6.37-rc1 while editing a
text file with gedit over cifs.

unreferenced object 0xffff88022ee08b40 (size 32):
  comm "gedit", pid 2524, jiffies 4300160388 (age 2633.655s)
  hex dump (first 32 bytes):
    5c 2e 67 6f 75 74 70 75 74 73 74 72 65 61 6d 2d  \.goutputstream-
    35 42 41 53 4c 56 00 de 09 00 00 00 2c 26 78 ee  5BASLV......,&x.
  backtrace:
    [<ffffffff81504a4d>] kmemleak_alloc+0x2d/0x60
    [<ffffffff81136e13>] __kmalloc+0xe3/0x1d0
    [<ffffffffa0313db0>] build_path_from_dentry+0xf0/0x230 [cifs]
    [<ffffffffa031ae1e>] cifs_setattr+0x9e/0x770 [cifs]
    [<ffffffff8115fe90>] notify_change+0x170/0x2e0
    [<ffffffff81145ceb>] sys_fchmod+0x10b/0x140
    [<ffffffff8100c172>] system_call_fastpath+0x16/0x1b
    [<ffffffffffffffff>] 0xffffffffffffffff

The commit 1025774c that removed inode_setattr() seems to have introduced this
memleak by returning early without freeing 'full_path'.

Reported-by: Andrew Hendry <andrew.hendry@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Tue, 9 Nov 2010 02:30:11 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  kernel: Constify temporary variable in roundup()

9 years agokernel: Constify temporary variable in roundup()
Tetsuo Handa [Mon, 8 Nov 2010 02:20:49 +0000]
kernel: Constify temporary variable in roundup()

Fix build error with GCC 3.x caused by commit b28efd54
"kernel: roundup should only reference arguments once" by constifying
temporary variable used in that macro.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>

9 years agosparc: fix openpromfs compile
Meelis Roos [Mon, 8 Nov 2010 21:38:14 +0000]
sparc: fix openpromfs compile

Fix openpromfs compilation by adding a missing semicolon in
fs/openpromfs/inode.c openprom_mount().

Signed-off-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Mon, 8 Nov 2010 19:54:53 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Add new ext4 inode tracepoints
  ext4: Don't call sb_issue_discard() in ext4_free_blocks()
  ext4: do not try to grab the s_umount semaphore in ext4_quota_off
  ext4: fix potential race when freeing ext4_io_page structures
  ext4: handle writeback of inodes which are being freed
  ext4: initialize the percpu counters before replaying the journal
  ext4: "ret" may be used uninitialized in ext4_lazyinit_thread()
  ext4: fix lazyinit hang after removing request

9 years agocifs: make cifs_ioctl handle NULL filp->private_data correctly
Jeff Layton [Mon, 8 Nov 2010 12:28:32 +0000]
cifs: make cifs_ioctl handle NULL filp->private_data correctly

Commit 13cfb7334e made cifs_ioctl use the tlink attached to the
cifsFileInfo for a filp. This ignores the case of an open directory
however, which in CIFS can have a NULL private_data until a readdir
is done on it.

This patch re-adds the NULL pointer checks that were removed in commit
50ae28f01 and moves the setting of tcon and "caps" variables lower.

Long term, a better fix would be to establish a f_op->open routine for
directories that populates that field at open time, but that requires
some other changes to how readdir calls are handled.

Reported-by: Kjell Rune Skaaraas <kjella79@yahoo.no>
Reviewed-and-Tested-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Mon, 8 Nov 2010 18:55:29 +0000]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  TTY: move .gitignore from drivers/char/ to drivers/tty/vt/
  TTY: create drivers/tty/vt and move the vt code there
  TTY: create drivers/tty and move the tty core files there

9 years agoMerge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Mon, 8 Nov 2010 18:54:49 +0000]
Merge branch 'staging-linus' of git://git./linux/kernel/git/gregkh/staging-next-2.6

* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-next-2.6:
  Staging: ath6kl: remove empty files that mess with 'distclean'
  staging: ath6kl: Fixing the driver to use modified mmc_host structure
  Staging: solo6x10: fix build problem

9 years agoMerge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 8 Nov 2010 18:54:23 +0000]
Merge branch 'rmobile-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  mmc: sh_mmcif: Convert extern inline to static inline.
  ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings.
  ARM: mach-shmobile: fix sh7372 after a recent clock framework rework
  ARM: mach-shmobile: include drivers/sh/Kconfig
  ARM: mach-shmobile: ap4evb: Add HDMI sound support
  ARM: mach-shmobile: clock-sh7372: Add FSIDIV clock support
  ARM: shmobile: remove sh_timer_config clk member

9 years agoMerge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 8 Nov 2010 18:53:21 +0000]
Merge branch 'sh-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: clkfwk: Fix up checkpatch warnings.
  sh: make some needlessly global sh7724 clocks static
  sh: add clk_round_parent() to optimize parent clock rate
  sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit.
  sh: nommu: Support building without an uncached mapping.
  sh: nommu: use 32-bit phys mode.
  sh: mach-se: Fix up SE7206 no ioport build.
  sh: intc: Update for single IRQ reservation helper.
  sh: clkfwk: Fix up rate rounding error handling.
  sh: mach-se: Rip out superfluous 7751 PIO routines.
  sh: mach-se: Rip out superfluous 770x PIO routines.
  sh: mach-edosk7705: Kill off machtype, consolidate board def.
  sh: mach-edosk7705: update for this century, kill off PIO trapping.
  sh: mach-se: Rip out superfluous 7206 PIO routines.
  sh: mach-systemh: Kill off dead board.
  sh: mach-snapgear: Kill off machtype, consolidate board def.
  sh: mach-snapgear: Rip out superfluous PIO routines.
  sh: mach-microdev: SuperIO-relative ioport mapping.

9 years agoext4: Add new ext4 inode tracepoints
Theodore Ts'o [Mon, 8 Nov 2010 18:51:33 +0000]
ext4: Add new ext4 inode tracepoints

Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and
ext4_begin_ordered_truncate()

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

9 years agoext4: Don't call sb_issue_discard() in ext4_free_blocks()
Theodore Ts'o [Mon, 8 Nov 2010 18:49:33 +0000]
ext4: Don't call sb_issue_discard() in ext4_free_blocks()

Commit 5c521830cf (ext4: Support discard requests when running in
no-journal mode) attempts to add sb_issue_discard() for data blocks
(in data=writeback mode) and in no-journal mode.  Unfortunately, this
no longer works, because in commit dd3932eddf (block: remove
BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous
interface, and there are times when we call ext4_free_blocks() when we
are are holding a spinlock, or are otherwise in an atomic context.

For now, I've removed the call to sb_issue_discard() to prevent a
deadlock or (if spinlock debugging is enabled) failures like this:

BUG: scheduling while atomic: rc.sysinit/1376/0x00000002
Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1
Call Trace:
[<ffffffff810397ce>] __schedule_bug+0x5e/0x70
[<ffffffff81403110>] schedule+0x950/0xa70
[<ffffffff81060bad>] ? insert_work+0x7d/0x90
[<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30
[<ffffffff81061127>] ? queue_work+0x37/0x60
[<ffffffff8140377d>] schedule_timeout+0x21d/0x360
[<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540
[<ffffffff81402680>] wait_for_common+0xc0/0x150
[<ffffffff81041490>] ? default_wake_function+0x0/0x10
[<ffffffff812034bc>] ? submit_bio+0x7c/0x100
[<ffffffff810680a0>] ? wake_bit_function+0x0/0x40
[<ffffffff814027b8>] wait_for_completion+0x18/0x20
[<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210
[<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60
[<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120
[<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70
[<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30
[<ffffffff81191618>] ext4_truncate+0x178/0x5d0
[<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280
[<ffffffff810d8976>] vmtruncate+0x56/0x70
[<ffffffff811925cb>] ext4_setattr+0x14b/0x460
[<ffffffff811319e4>] notify_change+0x194/0x380
[<ffffffff81117f80>] do_truncate+0x60/0x90
[<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20
[<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20
[<ffffffff81127539>] do_last+0x5d9/0x770
[<ffffffff811278bd>] do_filp_open+0x1ed/0x680
[<ffffffff8140644f>] ? page_fault+0x1f/0x30
[<ffffffff81132bfc>] ? alloc_fd+0xec/0x140
[<ffffffff81118db1>] do_sys_open+0x61/0x120
[<ffffffff81118e8b>] sys_open+0x1b/0x20
[<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b

https://bugzilla.kernel.org/show_bug.cgi?id=22302

Reported-by: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: jiayingz@google.com

9 years agoext4: do not try to grab the s_umount semaphore in ext4_quota_off
Dmitry Monakhov [Mon, 8 Nov 2010 18:47:33 +0000]
ext4: do not try to grab the s_umount semaphore in ext4_quota_off

It's not needed to sync the filesystem, and it fixes a lock_dep complaint.

Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>

9 years agoext4: fix potential race when freeing ext4_io_page structures
Theodore Ts'o [Mon, 8 Nov 2010 18:45:33 +0000]
ext4: fix potential race when freeing ext4_io_page structures

Use an atomic_t and make sure we don't free the structure while we
might still be submitting I/O for that page.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

9 years agoext4: handle writeback of inodes which are being freed
Theodore Ts'o [Mon, 8 Nov 2010 18:43:33 +0000]
ext4: handle writeback of inodes which are being freed

The following BUG can occur when an inode which is getting freed when
it still has dirty pages outstanding, and it gets deleted (in this
because it was the target of a rename).  In ordered mode, we need to
make sure the data pages are written just in case we crash before the
rename (or unlink) is committed.  If the inode is being freed then
when we try to igrab the inode, we end up tripping the BUG_ON at
fs/ext4/page-io.c:146.

To solve this problem, we need to keep track of the number of io
callbacks which are pending, and avoid destroying the inode until they
have all been completed.  That way we don't have to bump the inode
count to keep the inode from being destroyed; an approach which
doesn't work because the count could have already been dropped down to
zero before the inode writeback has started (at which point we're not
allowed to bump the count back up to 1, since it's already started
getting freed).

Thanks to Dave Chinner for suggesting this approach, which is also
used by XFS.

  kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146!
  Call Trace:
   [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307
   [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b
   [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2
   [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5
   [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac
   [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d
   [<ffffffff81087910>] do_writepages+0x1c/0x25
   [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d
   [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10
   [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2
   [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c
   [<ffffffff810c14a3>] evict+0x22/0x92
   [<ffffffff810c1a3d>] iput+0x212/0x249
   [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9
   [<ffffffff810bdf6b>] d_kill+0x3d/0x5d
   [<ffffffff810be613>] dput+0x13a/0x147
   [<ffffffff810b990d>] sys_renameat+0x1b5/0x258
   [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c
   [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea
   [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38
   [<ffffffff810b99c6>] sys_rename+0x16/0x18
   [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b

Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Nick Bowler <nbowler@elliptictech.com>

9 years agoMerge branch 'rmobile/core' into rmobile-fixes-for-linus
Paul Mundt [Mon, 8 Nov 2010 00:51:41 +0000]
Merge branch 'rmobile/core' into rmobile-fixes-for-linus

9 years agoMerge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and 'sh/intc-extens...
Paul Mundt [Mon, 8 Nov 2010 00:42:43 +0000]
Merge branches 'sh/pio-death', 'sh/nommu', 'sh/clkfwk', 'sh/core' and 'sh/intc-extension' into sh-fixes-for-linus

9 years agosh: clkfwk: Fix up checkpatch warnings.
Paul Mundt [Mon, 8 Nov 2010 00:40:23 +0000]
sh: clkfwk: Fix up checkpatch warnings.

The clk_round_parent() change introduced various checkpatch warnings,
tidy them up.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agosh: make some needlessly global sh7724 clocks static
Guennadi Liakhovetski [Thu, 4 Nov 2010 14:14:29 +0000]
sh: make some needlessly global sh7724 clocks static

These clocks are currently only used inside one .c file and are not
declared in any headers, therefore having them global is useless.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agosh: add clk_round_parent() to optimize parent clock rate
Guennadi Liakhovetski [Tue, 2 Nov 2010 11:27:24 +0000]
sh: add clk_round_parent() to optimize parent clock rate

Sometimes it is possible and reasonable to adjust the parent clock rate to
improve precision of the child clock, e.g., if the child clock has no siblings.
clk_round_parent() is a new addition to the SH clock-framework API, that
implements such an optimization for child clocks with divisors, taking all
integer values in a range.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agoStaging: ath6kl: remove empty files that mess with 'distclean'
Greg Kroah-Hartman [Sat, 6 Nov 2010 18:27:04 +0000]
Staging: ath6kl: remove empty files that mess with 'distclean'

These two .h files would get removed from the tree when doing
make distclean

It turns out they are not needed at all, so just delete them which fixes
people's git trees when doing development.

Reported-by: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agofloppy: fix another use-after-free
Vivek Goyal [Sat, 6 Nov 2010 12:16:05 +0000]
floppy: fix another use-after-free

While scanning the floopy code due to c093ee4f07f4 ("floppy: fix
use-after-free in module load failure path"), I found one more instance
of trying to access disk->queue pointer after doing put_disk() on
gendisk.  For some reason , floppy moule still loads/unloads fine.  The
object is probably still around with right pointer values.

 o There seems to be one more instance of trying to cleanup the request
   queue after we have called put_disk() on associated gendisk.

 o This fix is more out of code inspection.  Even without this fix for
   some reason I am able to load/unload floppy module without any
   issues.

 o Floppy module loads/unloads fine after the fix.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoTTY: move .gitignore from drivers/char/ to drivers/tty/vt/
Greg Kroah-Hartman [Sat, 6 Nov 2010 05:18:23 +0000]
TTY: move .gitignore from drivers/char/ to drivers/tty/vt/

The autogenerated files (consolemap_deftbl.c and defkeymap.c) need to
be ignored by git, so move the .gitignore file that was doing it to the
properly location now that the files have moved as well.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoipw2x00: remove the right /proc/net entry
Linus Torvalds [Sat, 6 Nov 2010 01:57:04 +0000]
ipw2x00: remove the right /proc/net entry

Commit 27ae60f8f7aa ("ipw2x00: replace "ieee80211" with "libipw" where
appropriate") changed DRV_NAME to be "libipw", but didn't properly fix
up the places where it was used to specify the name for the /proc/net/
directory.

For backwards compatibility reasons, that directory name remained
"ieee80211", but due to the DRV_NAME change, the error case printouts
and the cleanup functions now used "libipw" instead.  Which made it all
fail badly.

For example, on module unload as reported by Randy:

  WARNING: at fs/proc/generic.c:816 remove_proc_entry+0x156/0x35e()
  name 'libipw'

because it's trying to unregister a /proc directory that obviously
doesn't even exist.

Clean it all up to use DRV_PROCNAME for the actual /proc directory name.

Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Pavel Roskin <proski@gnu.org>
Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sat, 6 Nov 2010 00:49:22 +0000]
Merge branch 'kvm-updates/2.6.37' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: BookE: Load the lower half of MSR
  KVM: PPC: BookE: fix sleep with interrupts disabled
  KVM: PPC: e500: Call kvm_vcpu_uninit() before kvmppc_e500_tlb_uninit().
  PPC: KVM: Book E doesn't have __end_interrupts.
  KVM: x86: Issue smp_call_function_many with preemption disabled
  KVM: x86: fix information leak to userland
  KVM: PPC: fix information leak to userland
  KVM: MMU: fix rmap_remove on non present sptes
  KVM: Write protect memory after slot swap

9 years agofloppy: fix use-after-free in module load failure path
Linus Torvalds [Sat, 6 Nov 2010 00:45:59 +0000]
floppy: fix use-after-free in module load failure path

Commit 488211844e0c ("floppy: switch to one queue per drive instead of
sharing a queue") introduced a use-after-free.  We do "put_disk()" on
the disk device _before_ we then clean up the queue associated with that
disk.

Move the put_disk() down to avoid dereferencing a free'd data structure.

Cc: Jens Axboe <jaxboe@fusionio.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Reported-and-tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agowatchdog: Fix section mismatch and potential undefined behavior.
David Daney [Fri, 5 Nov 2010 23:17:39 +0000]
watchdog: Fix section mismatch and potential undefined behavior.

Commit d9ca07a05ce1 ("watchdog: Avoid kernel crash when disabling
watchdog") introduces a section mismatch.

Now that we reference no_watchdog from non-__init code it can no longer
be __initdata.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 5 Nov 2010 22:25:48 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (41 commits)
  inet_diag: Make sure we actually run the same bytecode we audited.
  netlink: Make nlmsg_find_attr take a const nlmsghdr*.
  fib: fib_result_assign() should not change fib refcounts
  netfilter: ip6_tables: fix information leak to userspace
  cls_cgroup: Fix crash on module unload
  memory corruption in X.25 facilities parsing
  net dst: fix percpu_counter list corruption and poison overwritten
  rds: Remove kfreed tcp conn from list
  rds: Lost locking in loop connection freeing
  de2104x: fix panic on load
  atl1 : fix panic on load
  netxen: remove unused firmware exports
  caif: Remove noisy printout when disconnecting caif socket
  caif: SPI-driver bugfix - incorrect padding.
  caif: Bugfix for socket priority, bindtodev and dbg channel.
  smsc911x: Set Ethernet EEPROM size to supported device's size
  ipv4: netfilter: ip_tables: fix information leak to userland
  ipv4: netfilter: arp_tables: fix information leak to userland
  cxgb4vf: remove call to stop TX queues at load time.
  cxgb4: remove call to stop TX queues at load time.
  ...

9 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1...
Linus Torvalds [Fri, 5 Nov 2010 21:17:22 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: ohci: fix race when reading count in AR descriptor
  firewire: ohci: avoid reallocation of AR buffers
  firewire: ohci: fix race in AR split packet handling
  firewire: ohci: fix buffer overflow in AR split packet handling

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Fri, 5 Nov 2010 21:17:01 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: make cifs_set_oplock_level() take a cifsInodeInfo pointer
  cifs: dereferencing first then checking
  cifs: trivial comment fix: tlink_tree is now a rbtree
  [CIFS] Cleanup unused variable build warning
  cifs: convert tlink_tree to a rbtree
  cifs: store pointer to master tlink in superblock (try #2)
  cifs: trivial doc fix: note setlease implemented
  CIFS: Add cifs_set_oplock_level
  FS: cifs, remove unneeded NULL tests

9 years agoposix-cpu-timers: workaround to suppress the problems with mt exec
Oleg Nesterov [Fri, 5 Nov 2010 15:53:42 +0000]
posix-cpu-timers: workaround to suppress the problems with mt exec

posix-cpu-timers.c correctly assumes that the dying process does
posix_cpu_timers_exit_group() and removes all !CPUCLOCK_PERTHREAD
timers from signal->cpu_timers list.

But, it also assumes that timer->it.cpu.task is always the group
leader, and thus the dead ->task means the dead thread group.

This is obviously not true after de_thread() changes the leader.
After that almost every posix_cpu_timer_ method has problems.

It is not simple to fix this bug correctly. First of all, I think
that timer->it.cpu should use struct pid instead of task_struct.
Also, the locking should be reworked completely. In particular,
tasklist_lock should not be used at all. This all needs a lot of
nontrivial and hard-to-test changes.

Change __exit_signal() to do posix_cpu_timers_exit_group() when
the old leader dies during exec. This is not the fix, just the
temporary hack to hide the problem for 2.6.37 and stable. IOW,
this is obviously wrong but this is what we currently have anyway:
cpu timers do not work after mt exec.

In theory this change adds another race. The exiting leader can
detach the timers which were attached to the new leader. However,
the window between de_thread() and release_task() is small, we
can pretend that sys_timer_create() was called before de_thread().

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Fri, 5 Nov 2010 21:15:17 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (ltc4261) Fix error message format
  hwmon: (ltc4261) Add missing newline in debug message

9 years agocifs: make cifs_set_oplock_level() take a cifsInodeInfo pointer
Pavel Shilovsky [Wed, 3 Nov 2010 07:58:57 +0000]
cifs: make cifs_set_oplock_level() take a cifsInodeInfo pointer

All the callers already have a pointer to struct cifsInodeInfo. Use it.

Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

9 years agohwmon: (ltc4261) Fix error message format
Jean Delvare [Fri, 5 Nov 2010 14:59:29 +0000]
hwmon: (ltc4261) Fix error message format

adapter->id is deprecated and not set by any adapter driver, so this
was certainly not what the author wanted to use. adapter->nr maybe,
but as dev_err() already includes this value, as well as the client's
address, there's no point repeating them. Better print a simple error
message in plain English words.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

9 years agohwmon: (ltc4261) Add missing newline in debug message
Guenter Roeck [Tue, 26 Oct 2010 22:59:21 +0000]
hwmon: (ltc4261) Add missing newline in debug message

Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Fri, 5 Nov 2010 16:52:25 +0000]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: mark "hardwall" device as non-seekable
  asm-generic/stat.h: support 64-bit file time_t for stat()
  arch/tile: don't allow user code to set the PL via ptrace or signal return
  arch/tile: correct double syscall restart for nested signals
  arch/tile: avoid __must_check warning on one strict_strtol check
  arch/tile: bomb raw_local_irq_ to arch_local_irq_
  arch/tile: complete migration to new kmap_atomic scheme

9 years agoleds-net5501: taints kernel, add license
Randy Dunlap [Thu, 4 Nov 2010 17:28:00 +0000]
leds-net5501: taints kernel, add license

Add MODULE_LICENSE() that matches file comments so that kernel
is not tainted.

leds_net5501: module license 'unspecified' taints kernel.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Richard Purdie <rpurdie@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoKVM: PPC: BookE: Load the lower half of MSR
Scott Wood [Thu, 30 Sep 2010 19:31:27 +0000]
KVM: PPC: BookE: Load the lower half of MSR

This was preventing the guest from setting any bits in the
hardware MSR which aren't forced on, such as MSR[SPE].

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

9 years agoKVM: PPC: BookE: fix sleep with interrupts disabled
Scott Wood [Thu, 30 Sep 2010 19:28:50 +0000]
KVM: PPC: BookE: fix sleep with interrupts disabled

It is not legal to call mutex_lock() with interrupts disabled.
This will assert with debug checks enabled.

If there's a real need to disable interrupts here, it could be done
after the mutex is acquired -- but I don't see why it's needed at all.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

9 years agoKVM: PPC: e500: Call kvm_vcpu_uninit() before kvmppc_e500_tlb_uninit().
Scott Wood [Tue, 5 Oct 2010 19:22:41 +0000]
KVM: PPC: e500: Call kvm_vcpu_uninit() before kvmppc_e500_tlb_uninit().

The VCPU uninit calls some TLB functions, and the TLB uninit function
frees the memory used by them.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

9 years agoPPC: KVM: Book E doesn't have __end_interrupts.
Scott Wood [Mon, 18 Oct 2010 22:35:48 +0000]
PPC: KVM: Book E doesn't have __end_interrupts.

Fix an unresolved symbol with CONFIG_KVM_GUEST plus CONFIG_RELOCATABLE on
Book E.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>

9 years agoKVM: x86: Issue smp_call_function_many with preemption disabled
Jan Kiszka [Mon, 1 Nov 2010 13:01:13 +0000]
KVM: x86: Issue smp_call_function_many with preemption disabled

smp_call_function_many is specified to be called only with preemption
disabled. Fulfill this requirement.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

9 years agoKVM: x86: fix information leak to userland
Vasiliy Kulikov [Sat, 30 Oct 2010 18:54:47 +0000]
KVM: x86: fix information leak to userland

Structures kvm_vcpu_events, kvm_debugregs, kvm_pit_state2 and
kvm_clock_data are copied to userland with some padding and reserved
fields unitialized.  It leads to leaking of contents of kernel stack
memory.  We have to initialize them to zero.

In patch v1 Jan Kiszka suggested to fill reserved fields with zeros
instead of memset'ting the whole struct.  It makes sense as these
fields are explicitly marked as padding.  No more fields need zeroing.

KVM-Stable-Tag.
Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

9 years agoKVM: PPC: fix information leak to userland
Vasiliy Kulikov [Sat, 30 Oct 2010 09:04:24 +0000]
KVM: PPC: fix information leak to userland

Structure kvm_ppc_pvinfo is copied to userland with flags and
pad fields unitialized.  It leads to leaking of contents of
kernel stack memory.

Signed-off-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

9 years agoKVM: MMU: fix rmap_remove on non present sptes
Marcelo Tosatti [Mon, 25 Oct 2010 13:58:22 +0000]
KVM: MMU: fix rmap_remove on non present sptes

drop_spte should not attempt to rmap_remove a non present shadow pte.

This fixes a BUG_ON seen on kvm-autotest.

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reported-by: Lucas Meneghel Rodrigues <lmr@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

9 years agoKVM: Write protect memory after slot swap
Michael S. Tsirkin [Mon, 25 Oct 2010 01:21:24 +0000]
KVM: Write protect memory after slot swap

I have observed the following bug trigger:

1. userspace calls GET_DIRTY_LOG
2. kvm_mmu_slot_remove_write_access is called and makes a page ro
3. page fault happens and makes the page writeable
   fault is logged in the bitmap appropriately
4. kvm_vm_ioctl_get_dirty_log swaps slot pointers

a lot of time passes

5. guest writes into the page
6. userspace calls GET_DIRTY_LOG

At point (5), bitmap is clean and page is writeable,
thus, guest modification of memory is not logged
and GET_DIRTY_LOG returns an empty bitmap.

The rule is that all pages are either dirty in the current bitmap,
or write-protected, which is violated here.

It seems that just moving kvm_mmu_slot_remove_write_access down
to after the slot pointer swap should fix this bug.

KVM-Stable-Tag.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>

9 years agoClean up relay_alloc_page_array() slightly by using vzalloc rather than vmalloc and...
Jesper Juhl [Thu, 4 Nov 2010 20:44:41 +0000]
Clean up relay_alloc_page_array() slightly by using vzalloc rather than vmalloc and memset

We can optimize kernel/relay.c::relay_alloc_page_array() slightly by
using vzalloc.  The patch makes these changes:

 - use vzalloc instead of vmalloc+memset.
 - remove redundant local variable 'array'.
 - declare local 'pa_size' as const.

Cuts down nicely on both source and object-code size.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoTTY: create drivers/tty/vt and move the vt code there
Greg Kroah-Hartman [Thu, 4 Nov 2010 19:50:47 +0000]
TTY: create drivers/tty/vt and move the vt code there

The vt and other related code is moved into the drivers/tty/vt directory.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoTTY: create drivers/tty and move the tty core files there
Greg Kroah-Hartman [Thu, 4 Nov 2010 18:10:29 +0000]
TTY: create drivers/tty and move the tty core files there

The tty code should be in its own subdirectory and not in the char
driver with all of the cruft that is currently there.

Based on work done by Arnd Bergmann <arnd@arndb.de>

Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoMerge branch 'for-linus-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg...
Linus Torvalds [Fri, 5 Nov 2010 14:54:40 +0000]
Merge branch 'for-linus-fixes' of git://git./linux/kernel/git/gerg/m68knommu

* 'for-linus-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k, m68knommu: Do not include linux/hardirq.h in asm/irqflags.h
  m68knommu: add back in declaration of do_IRQ

9 years agocifs: dereferencing first then checking
Jeff Layton [Tue, 2 Nov 2010 20:22:50 +0000]
cifs: dereferencing first then checking

This patch is based on Dan's original patch. His original description is
below:

Smatch complained about a couple checking for NULL after dereferencing
bugs.  I'm not super familiar with the code so I did the conservative
thing and move the dereferences after the checks.

The dereferences in cifs_lock() and cifs_fsync() were added in
ba00ba64cf0 "cifs: make various routines use the cifsFileInfo->tcon
pointer".  The dereference in find_writable_file() was added in
6508d904e6f "cifs: have find_readable/writable_file filter by fsuid".
The comments there say it's possible to trigger the NULL dereference
under stress.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

9 years agocifs: trivial comment fix: tlink_tree is now a rbtree
Suresh Jayaraman [Wed, 3 Nov 2010 05:23:49 +0000]
cifs: trivial comment fix: tlink_tree is now a rbtree

Noticed while reviewing (late) the rbtree conversion patchset (which has been merged
already).

Cc: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Suresh Jayaraman <sjayaraman@suse.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>

9 years agoinet_diag: Make sure we actually run the same bytecode we audited.
Nelson Elhage [Wed, 3 Nov 2010 16:35:41 +0000]
inet_diag: Make sure we actually run the same bytecode we audited.

We were using nlmsg_find_attr() to look up the bytecode by attribute when
auditing, but then just using the first attribute when actually running
bytecode. So, if we received a message with two attribute elements, where only
the second had type INET_DIAG_REQ_BYTECODE, we would validate and run different
bytecode strings.

Fix this by consistently using nlmsg_find_attr everywhere.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: Thomas Graf <tgraf@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetlink: Make nlmsg_find_attr take a const nlmsghdr*.
Nelson Elhage [Wed, 3 Nov 2010 16:35:40 +0000]
netlink: Make nlmsg_find_attr take a const nlmsghdr*.

This will let us use it on a nlmsghdr stored inside a netlink_callback.

Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agofib: fib_result_assign() should not change fib refcounts
Eric Dumazet [Thu, 4 Nov 2010 01:21:39 +0000]
fib: fib_result_assign() should not change fib refcounts

After commit ebc0ffae5 (RCU conversion of fib_lookup()),
fib_result_assign()  should not change fib refcounts anymore.

Thanks to Michael who did the bisection and bug report.

Reported-by: Michael Ellerman <michael@ellerman.id.au>
Tested-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit.
Paul Mundt [Thu, 4 Nov 2010 03:51:08 +0000]
sh: Simplify phys_addr_mask()/PTE_PHYS_MASK for 29/32-bit.

Given that __in_29bit_mode() is a constant for the non-PMB case, we can
simply use the PMB-facing version of phys_addr_mask() and drop the other
variants.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agosh: nommu: Support building without an uncached mapping.
Paul Mundt [Thu, 4 Nov 2010 03:46:19 +0000]
sh: nommu: Support building without an uncached mapping.

Now that nommu selects 32BIT we run in to the situation where SH-2A
supports an uncached identity mapping by way of the BSC, while the SH-2
does not. This provides stubs for the PC manglers and tidies up some of
the system*.h mess in the process.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agosh: nommu: use 32-bit phys mode.
Paul Mundt [Thu, 4 Nov 2010 03:32:24 +0000]
sh: nommu: use 32-bit phys mode.

The nommu code has regressed somewhat in that 29BIT gets set for the
SH-2/2A configs regardless of the fact that they are really 32BIT sans
MMU or PMB. This does a bit of tidying to get nommu properly selecting
32BIT as it was before.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agosh: mach-se: Fix up SE7206 no ioport build.
Paul Mundt [Thu, 4 Nov 2010 03:29:00 +0000]
sh: mach-se: Fix up SE7206 no ioport build.

There was a leftover inw() used here that really just wants to be a
__raw_readw() instead. Convert it over.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agommc: sh_mmcif: Convert extern inline to static inline.
Paul Mundt [Thu, 4 Nov 2010 03:21:25 +0000]
mmc: sh_mmcif: Convert extern inline to static inline.

Presently the extern inline case results in a compiler warning on ARM due
to the memory barrier definition used in the I/O routines. These
ultimately all want to be static inline anyways, so just convert them all
in place.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agoARM: mach-shmobile: Allow GPIO chips to register IRQ mappings.
Paul Mundt [Thu, 4 Nov 2010 03:19:11 +0000]
ARM: mach-shmobile: Allow GPIO chips to register IRQ mappings.

As non-PFC chips are added that may support IRQs, pass through to the
generic helper. This follows the the SH change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

9 years agonetfilter: ip6_tables: fix information leak to userspace
Jan Engelhardt [Thu, 4 Nov 2010 01:55:39 +0000]
netfilter: ip6_tables: fix information leak to userspace

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
David S. Miller [Thu, 4 Nov 2010 01:52:32 +0000]
Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-2.6

9 years agocls_cgroup: Fix crash on module unload
Herbert Xu [Wed, 3 Nov 2010 13:31:05 +0000]
cls_cgroup: Fix crash on module unload

Somewhere along the lines net_cls_subsys_id became a macro when
cls_cgroup is built as a module.  Not only did it make cls_cgroup
completely useless, it also causes it to crash on module unload.

This patch fixes this by removing that macro.

Thanks to Eric Dumazet for diagnosing this problem.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomemory corruption in X.25 facilities parsing
andrew hendry [Wed, 3 Nov 2010 12:54:53 +0000]
memory corruption in X.25 facilities parsing

Signed-of-by: Andrew Hendry <andrew.hendry@gmail.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet dst: fix percpu_counter list corruption and poison overwritten
Xiaotian Feng [Tue, 2 Nov 2010 16:11:05 +0000]
net dst: fix percpu_counter list corruption and poison overwritten

There're some percpu_counter list corruption and poison overwritten warnings
in recent kernel, which is resulted by fc66f95c.

commit fc66f95c switches to use percpu_counter, in ip6_route_net_init, kernel
init the percpu_counter for dst entries, but, the percpu_counter is never destroyed
in ip6_route_net_exit. So if the related data is freed by kernel, the freed percpu_counter
is still on the list, then if we insert/remove other percpu_counter, list corruption
resulted. Also, if the insert/remove option modifies the ->prev,->next pointer of
the freed value, the poison overwritten is resulted then.

With the following patch, the percpu_counter list corruption and poison overwritten
warnings disappeared.

Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Cc: "Pekka Savola (ipv6)" <pekkas@netcore.fi>
Cc: James Morris <jmorris@namei.org>
Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
Cc: Patrick McHardy <kaber@trash.net>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agords: Remove kfreed tcp conn from list
Pavel Emelyanov [Tue, 2 Nov 2010 01:54:01 +0000]
rds: Remove kfreed tcp conn from list

All the rds_tcp_connection objects are stored list, but when
being freed it should be removed from there.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agords: Lost locking in loop connection freeing
Pavel Emelyanov [Tue, 2 Nov 2010 01:52:05 +0000]
rds: Lost locking in loop connection freeing

The conn is removed from list in there and this requires
proper lock protection.

Signed-off-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agode2104x: fix panic on load
Eric Dumazet [Wed, 3 Nov 2010 12:25:32 +0000]
de2104x: fix panic on load

Its now illegal to call netif_stop_queue() before register_netdev()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoatl1 : fix panic on load
Eric Dumazet [Wed, 3 Nov 2010 12:11:21 +0000]
atl1 : fix panic on load

Its now illegal to call netif_stop_queue() before register_netdev()

Reported-by: Tom Gundersen <teg@jklm.no>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonetxen: remove unused firmware exports
Amerigo Wang [Tue, 2 Nov 2010 18:25:31 +0000]
netxen: remove unused firmware exports

Quote from Amit Salecha:

"Actually I was not updated, NX_UNIFIED_ROMIMAGE_NAME (phanfw.bin) is already
submitted and its present in linux-firmware.git.

I will get back to you on NX_P2_MN_ROMIMAGE_NAME, NX_P3_CT_ROMIMAGE_NAME and
NX_P3_MN_ROMIMAGE_NAME. Whether this will be submitted ?"

We have to remove these, otherwise we will get wrong info from modinfo.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dhananjay Phadke <dhananjay.phadke@qlogic.com>
Cc: Narender Kumar <narender.kumar@qlogic.com>
Acked-by: Amit Kumar Salecha <amit.salecha@qlogic.com>--
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocaif: Remove noisy printout when disconnecting caif socket
sjur.brandeland@stericsson.com [Wed, 3 Nov 2010 10:19:25 +0000]
caif: Remove noisy printout when disconnecting caif socket

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocaif: SPI-driver bugfix - incorrect padding.
Sjur Brændeland [Mon, 1 Nov 2010 11:52:48 +0000]
caif: SPI-driver bugfix - incorrect padding.

Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agocaif: Bugfix for socket priority, bindtodev and dbg channel.
André Carvalho de Matos [Mon, 1 Nov 2010 11:52:47 +0000]
caif: Bugfix for socket priority, bindtodev and dbg channel.

Changes:
o Bugfix: SO_PRIORITY for SOL_SOCKET could not be handled
  in caif's setsockopt,  using the struct sock attribute priority instead.

o Bugfix: SO_BINDTODEVICE for SOL_SOCKET could not be handled
  in caif's setsockopt,  using the struct sock attribute ifindex instead.

o Wrong assert statement for RFM layer segmentation.

o CAIF Debug channels was not working over SPI, caif_payload_info
  containing padding info must be initialized.

o Check on pointer before dereferencing when unregister dev in caif_dev.c

Signed-off-by: Sjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>