7 years agoblk-flush: fix invalid BUG_ON in blk_insert_flush
Jeff Moyer [Mon, 17 Oct 2011 10:57:22 +0000]
blk-flush: fix invalid BUG_ON in blk_insert_flush

commit 834f9f61a525d2f6d3d0c93894e26326c8d3ceed upstream.

A user reported a regression due to commit
4853abaae7e4a2af938115ce9071ef8684fb7af4 (block: fix flush
machinery for stacking drivers with differring flush flags).
Part of the problem is that blk_insert_flush required a
single bio be attached to the request.  In reality, having
no attached bio is also a valid case, as can be observed with
an empty flush.

[1] http://www.redhat.com/archives/dm-devel/2011-September/msg00154.html

Reported-by: Christophe Saout <christophe@saout.de>
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agohpsa: add small delay when using PCI Power Management to reset for kump
Mike Miller [Fri, 21 Oct 2011 06:19:43 +0000]
hpsa: add small delay when using PCI Power Management to reset for kump

commit c4853efec665134b2e6fc9c13447323240980351 upstream.

The P600 requires a small delay when changing states. Otherwise we may think
the board did not reset and we bail. This for kdump only and is particular
to the P600.

Signed-off-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoVFS: fix statfs() automounter semantics regression
Dan McGee [Tue, 1 Nov 2011 23:23:10 +0000]
VFS: fix statfs() automounter semantics regression

commit 5c8a0fbba543d9428a486f0d1282bbcf3cf1d95a upstream.

No one in their right mind would expect statfs() to not work on a
automounter managed mount point. Fix it.

[ I'm not sure about the "no one in their right mind" part.  It's not
  mounted, and you didn't ask for it to be mounted.  But nobody will
  really care, and this probably makes it match previous semantics, so..
      - Linus ]

This mirrors the fix made to the quota code in 815d405ceff0d69646.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxen/blkback: Report VBD_WSECT (wr_sect) properly.
Konrad Rzeszutek Wilk [Mon, 10 Oct 2011 16:33:21 +0000]
xen/blkback: Report VBD_WSECT (wr_sect) properly.

commit 5c62cb48602dba95159c81ffeca179d3852e25be upstream.

We did not increment the amount of sectors written to disk
b/c we tested for the == WRITE which is incorrect - as the
operations are more of WRITE_FLUSH, WRITE_ODIRECT. This patch
fixes it by doing a & WRITE check.

Reported-by: Andy Burns <xen.lists@burns.me.uk>
Suggested-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoblock: make gendisk hold a reference to its queue
Tejun Heo [Mon, 17 Oct 2011 11:42:43 +0000]
block: make gendisk hold a reference to its queue

commit f992ae801a7dec34a4ed99a6598bbbbfb82af4fb upstream.

The following command sequence triggers an oops.

# mount /dev/sdb1 /mnt
# echo 1 > /sys/class/scsi_device/0\:0\:1\:0/device/delete
# umount /mnt

 general protection fault: 0000 [#1] PREEMPT SMP
 CPU 2
 Modules linked in:

 Pid: 791, comm: umount Not tainted 3.1.0-rc3-work+ #8 Bochs Bochs
 RIP: 0010:[<ffffffff810d0879>]  [<ffffffff810d0879>] __lock_acquire+0x389/0x1d60
...
 Call Trace:
  [<ffffffff810d2845>] lock_acquire+0x95/0x140
  [<ffffffff81aed87b>] _raw_spin_lock+0x3b/0x50
  [<ffffffff811573bc>] bdi_lock_two+0x5c/0x70
  [<ffffffff811c2f6c>] bdev_inode_switch_bdi+0x4c/0xf0
  [<ffffffff811c3fcb>] __blkdev_put+0x11b/0x1d0
  [<ffffffff811c4010>] __blkdev_put+0x160/0x1d0
  [<ffffffff811c40df>] blkdev_put+0x5f/0x190
  [<ffffffff8118f18d>] kill_block_super+0x4d/0x80
  [<ffffffff8118f4a5>] deactivate_locked_super+0x45/0x70
  [<ffffffff8119003a>] deactivate_super+0x4a/0x70
  [<ffffffff811ac4ad>] mntput_no_expire+0xed/0x130
  [<ffffffff811acf2e>] sys_umount+0x7e/0x3a0
  [<ffffffff81aeeeab>] system_call_fastpath+0x16/0x1b

This is because bdev holds on to disk but disk doesn't pin the
associated queue.  If a SCSI device is removed while the device is
still open, the sdev puts the base reference to the queue on release.
When the bdev is finally released, the associated queue is already
gone along with the bdi and bdev_inode_switch_bdi() ends up
dereferencing already freed bdi.

Even if it were not for this bug, disk not holding onto the associated
queue is very unusual and error-prone.

Fix it by making add_disk() take an extra reference to its queue and
put it on disk_release() and ensuring that disk and its fops owner are
put in that order after all accesses to the disk and queue are
complete.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoNFS/sunrpc: don't use a credential with extra groups.
NeilBrown [Mon, 24 Oct 2011 23:25:49 +0000]
NFS/sunrpc: don't use a credential with extra groups.

commit dc6f55e9f8dac4b6479be67c5c9128ad37bb491f upstream.

The sunrpc layer keeps a cache of recently used credentials and
'unx_match' is used to find the credential which matches the current
process.

However unx_match allows a match when the cached credential has extra
groups at the end of uc_gids list which are not in the process group list.

So if a process with a list of (say) 4 group accesses a file and gains
access because of the last group in the list, then another process
with the same uid and gid, and a gid list being the first tree of the
gids of the original process tries to access the file, it will be
granted access even though it shouldn't as the wrong rpc credential
will be used.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLK
Mark Brown [Tue, 1 Nov 2011 13:53:54 +0000]
ASoC: Ensure we always delay for WM8962 FLL when starting from SYSCLK

commit 0b7dd6ad92b6cace35dc5d06d6e236c2751c85dc upstream.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: Ensure the WM8962 oscillator and PLLs start up disabled
Mark Brown [Tue, 1 Nov 2011 13:53:37 +0000]
ASoC: Ensure the WM8962 oscillator and PLLs start up disabled

commit 2af8de8c39cf58e5a5e40a9d5d71332da98e6ba7 upstream.

Since there is no current software control for these they would otherwise
be left enabled, consuming power.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: Ensure WM8962 PLL registers are reset
Mark Brown [Tue, 1 Nov 2011 13:36:10 +0000]
ASoC: Ensure WM8962 PLL registers are reset

commit 4f4488abc97c1c27ff029f887944e6a6da1f5733 upstream.

The WM8962 has a separate software reset for the PLL registers. Ensure that
these are reset also on startup.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: WM8904: Set `invert' bit for Capture Switch
Hong Xu [Fri, 28 Oct 2011 07:36:39 +0000]
ASoC: WM8904: Set `invert' bit for Capture Switch

commit 5a7c5f26df3c0122814dfa1c13ef6dfbdbffdb86 upstream.

Set `invert' bit for Capture Switch. Otherwise analogue is muted when
Capture Switch is ON.

Signed-off-by: Hong Xu <hong.xu@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmt
Axel Lin [Fri, 28 Oct 2011 07:17:56 +0000]
ASoC: Leave input audio data bit length settings untouched in wm8711_set_dai_fmt

commit d558cfc30064a97c2c65dbd2b3a4f5a1dea7ec1b upstream.

Current implementation in wm8711_set_dai_fmt always clear BIT[3:2]
(the Input Audio Data Bit Length Select) of WM8711_IFACE(07h) register.
Input Audio Data Bit Length Select bits are set by wm8711_hw_params,
we should leave BIT[3:2] untouched in wm8711_set_dai_fmt.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: wm8711: Fix wrong mask for setting input audio data bit length select
Axel Lin [Fri, 28 Oct 2011 03:08:01 +0000]
ASoC: wm8711: Fix wrong mask for setting input audio data bit length select

commit 04c57163c8edfbc50e022737014069998ba4fc5f upstream.

The Input Audio Data Bit Length Select is controlled by BIT[3:2] of
WM8711_IFACE(07h) register.
Current code incorrectly masks BIT[1:0] which is for Audio Data Format Select.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agompt2sas: Fix for system hang when discovery in progress
nagalakshmi.nandigama@lsi.com [Fri, 21 Oct 2011 04:36:33 +0000]
mpt2sas: Fix for system hang when discovery in progress

commit 0167ac67ff6f35bf2364f7672c8012b0cd40277f upstream.

Fix for issue : While discovery is in progress, hot unplug and hot plug of
enclosure connected to the controller card is causing system to hang.

When a device is in the process of being detected at driver load time then
if it is removed, the device that is no longer present will not be added
to the list. So the code in _scsih_probe_sas() is rearranged as such so
the devices that failed to be detected are not added to the list.

Signed-off-by: Nagalakshmi Nandigama <nagalakshmi.nandigama@lsi.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoFix block queue and elevator memory leak in scsi_alloc_sdev
Anton Blanchard [Wed, 2 Nov 2011 21:56:22 +0000]
Fix block queue and elevator memory leak in scsi_alloc_sdev

commit f7c9c6bb14f3104608a3a83cadea10a6943d2804 upstream.

When looking at memory consumption issues I noticed quite a
lot of memory in the kmalloc-2048 bucket:

  OBJS ACTIVE  USE OBJ SIZE  SLABS OBJ/SLAB CACHE SIZE NAME
  6561   6471  98%    2.30K    243       27     15552K kmalloc-2048

Over 15MB. slub debug shows that cfq is responsible for almost
all of it:

# sort -nr /sys/kernel/slab/kmalloc-2048/alloc_calls
6402 .cfq_init_queue+0xec/0x460 age=43423/43564/43655 pid=1 cpus=4,11,13

In scsi_alloc_sdev we do scsi_alloc_queue but if slave_alloc
fails we don't free it with scsi_free_queue.

The patch below fixes the issue:

  OBJS ACTIVE  USE OBJ SIZE  SLABS OBJ/SLAB CACHE SIZE NAME
   135     72  53%    2.30K      5       27       320K kmalloc-2048

# cat /sys/kernel/slab/kmalloc-2048/alloc_calls
3 .cfq_init_queue+0xec/0x460 age=3811/3876/3925 pid=1 cpus=4,11,13

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoMake scsi_free_queue() kill pending SCSI commands
Bart Van Assche [Fri, 23 Sep 2011 17:48:18 +0000]
Make scsi_free_queue() kill pending SCSI commands

commit 3308511c93e6ad0d3c58984ecd6e5e57f96b12c8 upstream.

Make sure that SCSI device removal via scsi_remove_host() does finish
all pending SCSI commands. Currently that's not the case and hence
removal of a SCSI host during I/O can cause a deadlock. See also
"blkdev_issue_discard() hangs forever if underlying storage device is
removed" (http://bugzilla.kernel.org/show_bug.cgi?id=40472). See also
http://lkml.org/lkml/2011/8/27/6.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoscsi_dh: check queuedata pointer before proceeding further
Moger, Babu [Wed, 26 Oct 2011 18:29:38 +0000]
scsi_dh: check queuedata pointer before proceeding further

commit a18a920c70d48a8e4a2b750d8a183b3c1a4be514 upstream.

This patch validates sdev pointer in scsi_dh_activate before proceeding further.

Without this check we might see the panic as below. I have seen this
panic multiple times..

Call trace:

 #0 [ffff88007d647b50] machine_kexec at ffffffff81020902
 #1 [ffff88007d647ba0] crash_kexec at ffffffff810875b0
 #2 [ffff88007d647c70] oops_end at ffffffff8139c650
 #3 [ffff88007d647c90] __bad_area_nosemaphore at ffffffff8102dd15
 #4 [ffff88007d647d50] page_fault at ffffffff8139b8cf
    [exception RIP: scsi_dh_activate+0x82]
    RIP: ffffffffa0041922  RSP: ffff88007d647e00  RFLAGS: 00010046
    RAX: 0000000000000000  RBX: 0000000000000000  RCX: 00000000000093c5
    RDX: 00000000000093c5  RSI: ffffffffa02e6640  RDI: ffff88007cc88988
    RBP: 000000000000000f   R8: ffff88007d646000   R9: 0000000000000000
    R10: ffff880082293790  R11: 00000000ffffffff  R12: ffff88007cc88988
    R13: 0000000000000000  R14: 0000000000000286  R15: ffff880037b845e0
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0000
 #5 [ffff88007d647e38] run_workqueue at ffffffff81060268
 #6 [ffff88007d647e78] worker_thread at ffffffff81060386
 #7 [ffff88007d647ee8] kthread at ffffffff81064436
 #8 [ffff88007d647f48] kernel_thread at ffffffff81003fba

Signed-off-by: Babu Moger <babu.moger@netapp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agost: fix race in st_scsi_execute_end
Petr Uzel [Fri, 21 Oct 2011 11:31:09 +0000]
st: fix race in st_scsi_execute_end

commit c68bf8eeaa57c852e74adcf597237be149eef830 upstream.

The call to complete() in st_scsi_execute_end() wakes up sleeping thread
in write_behind_check(), which frees the st_request, thus invalidating
the pointer to the associated bio structure, which is then passed to the
blk_rq_unmap_user(). Fix by storing pointer to bio structure into
temporary local variable.

This bug is present since at least linux-2.6.32.

Signed-off-by: Petr Uzel <petr.uzel@suse.cz>
Reported-by: Juergen Groß <juergen.gross@ts.fujitsu.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Kai Mäkisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoiscsi-target: Fix non-immediate TMR handling
Nicholas Bellinger [Fri, 28 Oct 2011 20:37:19 +0000]
iscsi-target: Fix non-immediate TMR handling

commit 5a4c8666c6d576f076a7c6824589cdbb984c0f84 upstream.

This patch addresses two issues with non immediate TMR handling in
iscsit_handle_task_mgt_cmd().  The first involves breakage due to
v3.1-rc conversion of iscsit_sequence_cmd(), which upon good status
would hit the iscsit_add_reject_from_cmd() block of code.  This patch
adds an explict check for CMDSN_ERROR_CANNOT_RECOVER.

The second adds a check to return when non immediate TMR operation is
detected after iscsit_ack_from_expstatsn(), as iscsit_sequence_cmd()
-> iscsit_execute_cmd() will have called transport_generic_handle_tmr()
for the non immediate TMR case already.

Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoiscsi-target: Add missing CMDSN_LOWER_THAN_EXP check in iscsit_handle_scsi_cmd
Nicholas Bellinger [Fri, 28 Oct 2011 20:32:35 +0000]
iscsi-target: Add missing CMDSN_LOWER_THAN_EXP check in iscsit_handle_scsi_cmd

commit 7e32da55e26b80d57961681e53aa67938268db3f upstream.

This patch adds a missing CMDSN_LOWER_THAN_EXP return check for
iscsit_sequence_cmd() in iscsit_handle_scsi_cmd() that was incorrectly
dropped during the v3.1-rc cleanups to use iscsit_sequence_cmd().

Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDB
Nicholas Bellinger [Mon, 24 Oct 2011 20:35:37 +0000]
tcm_loop: Add explict read buffer memset for SCF_SCSI_CONTROL_SG_IO_CDB

commit 8cd79f24350826b81e16990d9e12bc878e67d385 upstream.

This patch addresses an issue with buggy userspace code sending I/O
via scsi-generic that does not explictly clear their associated read
buffers.  It adds an explict memset of the first SGL entry within
tcm_loop_new_cmd_map() for SCF_SCSI_CONTROL_SG_IO_CDB payloads that
are currently guaranteed to be a single SGL by target-core code.

This issue is a side effect of the v3.1-rc1 merge to remove the
extra memcpy between certain control CDB types using a contigious
+ cleared buffer in target-core, and performing a memcpy into the
SGL list within tcm_loop.

It was originally mainfesting itself by udev + scsi_id + scsi-generic
not properly setting up the expected /dev/disk/by-id/ symlinks because
the INQUIRY payload was containing extra bogus data preventing the
proper NAA IEEE WWN from being parsed by userspace.

Cc: Christoph Hellwig <hch@lst.de>
Cc: Andy Grover <agrover@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agohwmon: (w83627ehf) Fix broken driver init
Guenter Roeck [Sun, 6 Nov 2011 19:25:18 +0000]
hwmon: (w83627ehf) Fix broken driver init

commit bfa02b0da66965caf46e441270af87edda4fea14 upstream.

Commit 2265cef2 (hwmon: (w83627ehf) Properly report PECI and AMD-SI
sensor types) results in kernel panic if data->temp_label was not
initialized.
The problem was found with chip W83627DHG-P.

Add check if data->temp->label was set before use.

Based on incomplete patch by Alexander Beregalov.

Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Tested-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agohwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types
Jean Delvare [Fri, 4 Nov 2011 11:00:47 +0000]
hwmon: (w83627ehf) Properly report PECI and AMD-SI sensor types

commit 2265cef2751b3441df91f85e0107f9f549e5b711 upstream.

When temperature sources are PECI or AMD-SI agents, it makes no sense
to report their type as diode or thermistor. Instead we must report
their digital nature.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agohwmon: (coretemp) Fix for non-SMP builds
Jean Delvare [Sun, 6 Nov 2011 19:25:18 +0000]
hwmon: (coretemp) Fix for non-SMP builds

commit 2aba6cac2a84f3b80e11a680c34d55e7739b474d upstream.

The definition of TO_ATTR_NO in the non-SMP case is wrong. As the SMP
definition resolves to the correct value, just use this for both
cases.

Without this fix the temperature attributes are named temp0_* instead
of temp2_*, so libsensors won't pick them. Broken since kernel 3.0.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Phil Sutter <phil@nwl.cc>
Acked-by: Durgadoss R <Durgadoss.r@intel.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agocciss: add small delay when using PCI Power Management to reset for kump
Mike Miller [Thu, 20 Oct 2011 20:19:17 +0000]
cciss: add small delay when using PCI Power Management to reset for kump

commit ab5dbebe33e0c353e8545f09c34553ac3351dad6 upstream.

The P600 requires a small delay when changing states. Otherwise we may think
the board did not reset and we bail. This for kdump only and is particular
to the P600.

Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: Update last_busy time after autosuspend fails
Alan Stern [Thu, 3 Nov 2011 23:52:46 +0000]
USB: Update last_busy time after autosuspend fails

commit b2c0a863e14676fa5760c6d828fd373288e2f64a upstream.

Originally, the runtime PM core would send an idle notification
whenever a suspend attempt failed.  The idle callback routine could
then schedule a delayed suspend for some time later.

However this behavior was changed by commit
f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle
notification after failing suspend).  No notifications were sent, and
there was no clear mechanism to retry failed suspends.

This caused problems for the usbhid driver, because it fails
autosuspend attempts as long as a key is being held down.  A companion
patch changes the PM core's behavior, but we also need to change the
USB core.  In particular, this patch (as1493) updates the device's
last_busy time when an autosuspend fails, so that the PM core will
retry the autosuspend in the future when the delay time expires
again.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Henrik Rydberg <rydberg@euromail.se>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoPM / Runtime: Automatically retry failed autosuspends
Alan Stern [Thu, 3 Nov 2011 22:39:18 +0000]
PM / Runtime: Automatically retry failed autosuspends

commit 886486b792e4f6f96d4fbe8ec5bf20811cab7d6a upstream.

Originally, the runtime PM core would send an idle notification
whenever a suspend attempt failed.  The idle callback routine could
then schedule a delayed suspend for some time later.

However this behavior was changed by commit
f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle
notification after failing suspend).  No notifications were sent, and
there was no clear mechanism to retry failed suspends.

This caused problems for the usbhid driver, because it fails
autosuspend attempts as long as a key is being held down.  Therefore
this patch (as1492) adds a mechanism for retrying failed
autosuspends.  If the callback routine updates the last_busy field so
that the next autosuspend expiration time is in the future, the
autosuspend will automatically be rescheduled.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agokbuild: Fix help text not displayed in choice option.
Srinivas Kandagatla [Tue, 2 Aug 2011 17:49:52 +0000]
kbuild: Fix help text not displayed in choice option.

commit 3f198dfee49d2e9c30583c62b0c79286c78c7b44 upstream.

Help text under choice menu is never displayed because it does not have
symbol name associated with it, however many kconfigs have help text
under choice, assuming that it will be displayed when user selects help.
for example in Kconfig if we have:
choice
        prompt "Choice"
        ---help---
           HELP TEXT ...

config A
        bool "A"

config B
        bool "B"

endchoice

Without this patch "HELP TEXT" is not displayed when user selects help
option when "Choice" is highlighted from menuconfig or xconfig or
gconfig.

This patch changes the logic in menu_get_ext_help to display help for
cases which dont have symbol names like choice.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Reviewed-by: Stuart Menefy <stuart.menefy@st.com>
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: set HPD polarity in hpd_init()
Alex Deucher [Thu, 3 Nov 2011 15:21:39 +0000]
drm/radeon/kms: set HPD polarity in hpd_init()

commit 64912e997f0fe13512e4c7b90e4f7c11cb922ab5 upstream.

Polarity needs to be set accordingly to connector status (connected
or disconnected). Set it up in hpd_init() so first hotplug works
reliably no matter what is the initial set of connector. hpd_init()
also covers resume so HPD will work correctly after resume as well.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <j.glisse@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: add MSI module parameter
Alex Deucher [Tue, 1 Nov 2011 18:20:30 +0000]
drm/radeon/kms: add MSI module parameter

commit a18cee15ed4c8b6a35f96b7b26a46bac32e04bd9 upstream.

Allow the user to override whether MSIs are enabled
or not on supported ASICs.  MSIs are disabled by default
on IGP chips as they tend not to work.  However certain
IGP chips only seem to work with MSIs enabled.

I suspect this is a chipset or bios issue, but I'm not sure
what the proper fix is.  This will at least make diagnosing
and working around the problem much easier.

See:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: Add MSI quirk for Dell RS690
Alex Deucher [Tue, 1 Nov 2011 18:14:18 +0000]
drm/radeon/kms: Add MSI quirk for Dell RS690

commit 01e718ec194e30b3e8eb3858c742c13649757efc upstream.

Some Dell laptops only seem to work with MSIs.  This
looks like a platform/bios bug.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: properly set panel mode for eDP
Alex Deucher [Mon, 31 Oct 2011 12:54:41 +0000]
drm/radeon/kms: properly set panel mode for eDP

commit 00dfb8df5bf8c3afe4c0bb8361133156b06b7a2c upstream.

This should make eDP more reliable.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon: set hpd polarity at init time so hotplug detect works
Jerome Glisse [Fri, 28 Oct 2011 21:52:34 +0000]
drm/radeon: set hpd polarity at init time so hotplug detect works

commit 8ab250d4484b72ccc78e34276c5ffa84c1d41303 upstream.

Polarity needs to be set accordingly to connector status (connected
or disconnected). Set it up at module init so first hotplug works
reliably no matter what is the initial set of connector.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: Add MSI quirk for HP RS690
Alex Deucher [Tue, 25 Oct 2011 19:11:08 +0000]
drm/radeon/kms: Add MSI quirk for HP RS690

commit b362105f7f5223fa4d2e03ceeea0e51da754ccc6 upstream.

Some HP laptops only seem to work with MSIs.  This
looks like a platform/bios bug.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=37679

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: split MSI check into a separate function
Alex Deucher [Tue, 25 Oct 2011 18:58:49 +0000]
drm/radeon/kms: split MSI check into a separate function

commit 8f6c25c59b0c895c68cae59d1b34e9a7b36971bc upstream.

This makes it easier to add quirks for certain systems.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon: avoid bouncing connector status btw disconnected & unknown
Jerome Glisse [Mon, 24 Oct 2011 22:16:34 +0000]
drm/radeon: avoid bouncing connector status btw disconnected & unknown

commit 340764465aa4a586ca332e61ae64883e5ad6f183 upstream.

Since force handling rework of d0d0a225e6ad43314c9aa7ea081f76adc5098ad4
we could end up bouncing connector status btw disconnected and unknown.
When connector status change a call to output_poll_changed happen which
in turn ask again for detect but with force set.

So set the load detect flags whenever we report the connector as
connected or unknown this avoid bouncing btw disconnected and unknown.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: Stefan Lippers-Hollmann <s.L-H@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Fix a regression for DMA-position check with CA0110
Takashi Iwai [Sun, 6 Nov 2011 12:49:13 +0000]
ALSA: hda - Fix a regression for DMA-position check with CA0110

commit 69f9ba9b0cad67bc03f0a096f7f274de795ca844 upstream.

The regression-fix in 3.1 for the check of DMA-position validity caused
yet another regression for CA0110.  As usual, this hardware seems working
only with LPIB properly.  Adding the appropriate driver-caps bit to force
LPIB fixes the problem.

Reported-and-tested-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Fix silent output regression with ALC861
Takashi Iwai [Sun, 6 Nov 2011 10:25:34 +0000]
ALSA: hda - Fix silent output regression with ALC861

commit 43dea228a3ba5463392281535dfb3d3fe56f4c2c upstream.

The 3.1 kernel has a regression for ALC861 codec where no sound output
is heard with the default setup.  It's because the amps in DACs aren't
properly unmuted while the output mixers are assigned only to pins.

This patch fixes the missing initialization of DACs when no mixer is
assigned to them.

Tested-by: Andrea Iob <andrea_iob@yahoo.it>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda/realtek - Skip invalid digital out pins
Takashi Iwai [Thu, 3 Nov 2011 15:54:06 +0000]
ALSA: hda/realtek - Skip invalid digital out pins

commit 51e4152a969aa6d2306492ebf143932dcb535c9b upstream.

Some BIOS report invalid pins as digital output pins.  The driver checks
the connection but it doesn't do it fully correctly, and it leaves some
undefined value as the audio-out widget, which makes the driver spewing
warnings.  This patch fixes the issue.

Reference: https://bugzilla.novell.com/show_bug.cgi?id=727348

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda/realtek - Don't create alt-stream for capture when unnecessary
Takashi Iwai [Wed, 2 Nov 2011 20:30:51 +0000]
ALSA: hda/realtek - Don't create alt-stream for capture when unnecessary

commit 1fa1757366783fb52e6e85c2d735db49b818d382 upstream.

When the driver finds multiple ADCs, it tries to create an alternative
capture PCM stream.  However, these secondary ADCs might be useless or
in uncontrolled paths in some cases, e.g. when auto-mic or dynamic
ADC-switching is enabled.  Also, when only a single capture source is
available, the multi-streams don't make sense, too.

With this patch, the driver checks such condition and skips the alt
stream appropriately.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Add support for 92HD65 / 92HD66 family of codecs
Charles Chin [Wed, 2 Nov 2011 06:56:58 +0000]
ALSA: hda - Add support for 92HD65 / 92HD66 family of codecs

commit ad5d8755116b431f0709c745ee17cb567a478d43 upstream.

These codecs have SPDIF-in, which is new to the 92HD83xxx compatible
families, so a bit of logic is added to support them.

Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Disable power-widget control for IDT 92HD83/93 as default
Charles Chin [Wed, 2 Nov 2011 06:53:30 +0000]
ALSA: hda - Disable power-widget control for IDT 92HD83/93 as default

commit 35c11777b906042eca9e6f1c03e464726c7faa07 upstream.

The power-widget control in patch_stac92hd83xxx() never worked properly,
thus it's safer to turn it off as default for now.

Signed-off-by: Charles Chin <Charles.Chin@idt.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: ua101: fix crash when unplugging
Clemens Ladisch [Sat, 15 Oct 2011 21:19:25 +0000]
ALSA: ua101: fix crash when unplugging

commit 862a6244eb9f9f5123fe819454fcfcae0ee1f2f9 upstream.

If the device is unplugged while running, it is possible for a PCM
device to be closed after the disconnect callback has returned.  This
means that kill_stream_urb() and disable_iso_interface() would try to
access already-invalid or freed USB data structures.

The function free_usb_related_resources() was intended to prevent this,
but forgot to clear the affected variables.

Reported-and-tested-by: Olivier Courtay <olivier@courtay.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonet: Unlock sock before calling sk_free()
Thomas Gleixner [Tue, 25 Oct 2011 02:30:50 +0000]
net: Unlock sock before calling sk_free()

[ Upstream commit b0691c8ee7c28a72748ff32e91b165ec12ae4de6 ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agothp: share get_huge_page_tail()
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:36 +0000]
thp: share get_huge_page_tail()

commit b35a35b556f5e6b7993ad0baf20173e75c09ce8c upstream.

This avoids duplicating the function in every arch gup_fast.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agosparc: gup_pte_range() support THP based tail recounting
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:31 +0000]
sparc: gup_pte_range() support THP based tail recounting

commit e0d85a366c2300efd230ef82a9b22110b0658331 upstream.

Up to this point the code assumed old refcounting for hugepages (pre-thp).
 This updates the code directly to the thp mapcount tail page refcounting.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agos390: gup_huge_pmd() return 0 if pte changes
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:28 +0000]
s390: gup_huge_pmd() return 0 if pte changes

commit 0693bc9ce2cc4f6a1b9c3c05790fc149a74c0b87 upstream.

s390 didn't return 0 in that case, if it's rolling back the *nr pointer it
should also return zero to avoid adding pages to the array at the wrong
offset.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agos390: gup_huge_pmd() support THP tail recounting
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:25 +0000]
s390: gup_huge_pmd() support THP tail recounting

commit 220a2eb228d032acde60e9fd044ca802706ff583 upstream.

Up to this point the code assumed old refcounting for hugepages (pre-thp).
This updates the code directly to the thp mapcount tail page refcounting.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: gup_huge_pmd() return 0 if pte changes
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:19 +0000]
powerpc: gup_huge_pmd() return 0 if pte changes

commit cf592bf768c4fa40282b8fce58a80820065de2cb upstream.

powerpc didn't return 0 in that case, if it's rolling back the *nr pointer
it should also return zero to avoid adding pages to the array at the wrong
offset.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: gup_hugepte() support THP based tail recounting
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:15 +0000]
powerpc: gup_hugepte() support THP based tail recounting

commit 3526741f0964c88bc2ce511e1078359052bf225b upstream.

Up to this point the code assumed old refcounting for hugepages (pre-thp).
This updates the code directly to the thp mapcount tail page refcounting.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: gup_hugepte() avoid freeing the head page too many times
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:11 +0000]
powerpc: gup_hugepte() avoid freeing the head page too many times

commit 8596468487e2062cae2aad56e973784e03959245 upstream.

We only taken "refs" pins on the head page not "*nr" pins.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: get_hugepte() don't put_page() the wrong page
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:08 +0000]
powerpc: get_hugepte() don't put_page() the wrong page

commit 405e44f2e312dd5dd63e5a9f459bffcbcd4368ef upstream.

"page" may have changed to point to the next hugepage after the loop
completed, The references have been taken on the head page, so the
put_page must happen there too.

This is a longstanding issue pre-thp inclusion.

It's totally unclear how these page_cache_add_speculative and
pte_val(pte) != pte_val(*ptep) checks are necessary across all the
powerpc gup_fast code, when x86 doesn't need any of that: there's no way
the page can be freed with irq disabled so we're guaranteed the
atomic_inc will happen on a page with page_count > 0 (so not needing the
speculative check).

The pte check is also meaningless on x86: no need to rollback on x86 if
the pte changed, because the pte can still change a CPU tick after the
check succeeded and it won't be rolled back in that case.  The important
thing is we got a reference on a valid page that was mapped there a CPU
tick ago.  So not knowing the soft tlb refill code of ppc64 in great
detail I'm not removing the "speculative" page_count increase and the
pte checks across all the code, but unless there's a strong reason for
it they should be later cleaned up too.

If a pte can change from huge to non-huge (like it could happen with
THP) passing a pte_t *ptep to gup_hugepte() would also require to repeat
the is_hugepd in gup_hugepte(), but that shouldn't happen with hugetlbfs
only so I'm not altering that.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: remove superfluous PageTail checks on the pte gup_fast
Andrea Arcangeli [Wed, 2 Nov 2011 20:37:03 +0000]
powerpc: remove superfluous PageTail checks on the pte gup_fast

commit 2839bdc1bfc0af76a2f0f11eca011590520a04fa upstream.

This part of gup_fast doesn't seem capable of handling hugetlbfs ptes,
those should be handled by gup_hugepd only, so these checks are
superfluous.

Plus if this wasn't a noop, it would have oopsed because, the insistence
of using the speculative refcounting would trigger a VM_BUG_ON if a tail
page was encountered in the page_cache_get_speculative().

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxHCI: Clear PLC for USB2 root hub ports
Andiry Xu [Fri, 23 Sep 2011 21:19:50 +0000]
xHCI: Clear PLC for USB2 root hub ports

commit 6fd4562178508a0949c9fdecd8558d8b10d671bd upstream.

When the link state changes, xHC will report a port status change event
and set the PORT_PLC bit, for both USB3 and USB2 root hub ports.

The PLC will be cleared by usbcore for USB3 root hub ports, but not for
USB2 ports, because they do not report USB_PORT_STAT_C_LINK_STATE in
wPortChange.

Clear it for USB2 root hub ports in handle_port_status().

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxHCI: test and clear RWC bit
Andiry Xu [Fri, 23 Sep 2011 21:19:49 +0000]
xHCI: test and clear RWC bit

commit d2f52c9e585bbb1a3c164e02b8dcd0d996c67353 upstream.

Introduce xhci_test_and_clear_bit() to clear RWC bit in PORTSC register.

Signed-off-by: Andiry Xu <andiry.xu@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxhci: If no endpoints changed, don't issue BW command.
Sarah Sharp [Fri, 2 Sep 2011 18:05:40 +0000]
xhci: If no endpoints changed, don't issue BW command.

commit 2dc3753997f3c80ce8b950242ab9bb3fb936acfd upstream.

Some alternate interface settings have no endpoints associated with them.
This shows up in some USB webcams, particularly the Logitech HD 1080p,
which uses the uvcvideo driver.  If a driver switches between two alt
settings with no endpoints, there is no need to issue a configure endpoint
command, because there is no endpoint information to update.

The only time a configure endpoint command with just the add slot flag set
makes sense is when the driver is updating hub characteristics in the slot
context.  However, that code never calls xhci_check_bandwidth, so we
should be safe not issuing a command if only the slot context add flag is
set.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousb_storage: Don't freeze in usb-stor-scan
Seth Forshee [Tue, 26 Jul 2011 14:56:07 +0000]
usb_storage: Don't freeze in usb-stor-scan

commit f02fe890ece7d695a5744b20525d45312382e6e4 upstream.

Scanning cannot be run during suspend or hibernation, but if
usb-stor-scan freezes another thread waiting on scanning to
complete may fail to freeze.

However, if usb-stor-scan is left freezable without ever actually
freezing then the freezer will wait on it to exit, and threads
waiting for scanning to finish will no longer be blocked. One
problem with this approach is that usb-stor-scan has a delay to
wait for devices to settle (which is currently the only point where
it can freeze). To work around this we can request that the freezer
send a fake signal when freezing, then use interruptible sleep to
wake the thread early when freezing happens.

To make this happen, the following changes are made to
usb-stor-scan:

 * Use set_freezable_with_signal() instead of set_freezable() to
   request a fake signal when freezing

 * Use wait_event_interruptible_timeout() instead of
   wait_event_freezable_timeout() to avoid freezing

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: fix race in xattr block allocation path
Eric Sandeen [Sat, 29 Oct 2011 14:15:35 +0000]
ext4: fix race in xattr block allocation path

commit 6d6a435190bdf2e04c9465cde5bdc3ac68cf11a4 upstream.

Ceph users reported that when using Ceph on ext4, the filesystem
would often become corrupted, containing inodes with incorrect
i_blocks counters.

I managed to reproduce this with a very hacked-up "streamtest"
binary from the Ceph tree.

Ceph is doing a lot of xattr writes, to out-of-inode blocks.
There is also another thread which does sync_file_range and close,
of the same files.  The problem appears to happen due to this race:

sync/flush thread               xattr-set thread
-----------------               ----------------

do_writepages                   ext4_xattr_set
ext4_da_writepages              ext4_xattr_set_handle
mpage_da_map_blocks             ext4_xattr_block_set
        set DELALLOC_RESERVE
                                ext4_new_meta_blocks
                                        ext4_mb_new_blocks
                                                if (!i_delalloc_reserved_flag)
                                                        vfs_dq_alloc_block
ext4_get_blocks
down_write(i_data_sem)
        set i_delalloc_reserved_flag
...
up_write(i_data_sem)
                                        if (i_delalloc_reserved_flag)
                                                vfs_dq_alloc_block_nofail

In other words, the sync/flush thread pops in and sets
i_delalloc_reserved_flag on the inode, which makes the xattr thread
think that it's in a delalloc path in ext4_new_meta_blocks(),
and add the block for a second time, after already having added
it once in the !i_delalloc_reserved_flag case in ext4_mb_new_blocks

The real problem is that we shouldn't be using the DELALLOC_RESERVED
state flag, and instead we should be passing
EXT4_GET_BLOCKS_DELALLOC_RESERVE down to ext4_map_blocks() instead of
using an inode state flag.  We'll fix this for now with using
i_data_sem to prevent this race, but this is really not the right way
to fix things.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: let ext4_page_mkwrite stop started handle in failure
Yongqiang Yang [Wed, 26 Oct 2011 09:00:19 +0000]
ext4: let ext4_page_mkwrite stop started handle in failure

commit fcbb5515825f1bb20b7a6f75ec48bee61416f879 upstream.

The started journal handle should be stopped in failure case.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: call ext4_handle_dirty_metadata with correct inode in ext4_dx_add_entry
Theodore Ts'o [Wed, 31 Aug 2011 16:02:51 +0000]
ext4: call ext4_handle_dirty_metadata with correct inode in ext4_dx_add_entry

commit 5930ea643805feb50a2f8383ae12eb6f10935e49 upstream.

ext4_dx_add_entry manipulates bh2 and frames[0].bh, which are two buffer_heads
that point to directory blocks assigned to the directory inode.  However, the
function calls ext4_handle_dirty_metadata with the inode of the file that's
being added to the directory, not the directory inode itself.  Therefore,
correct the code to dirty the directory buffers with the directory inode, not
the file inode.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: ext4_mkdir should dirty dir_block with newly created directory inode
Darrick J. Wong [Wed, 31 Aug 2011 16:00:51 +0000]
ext4: ext4_mkdir should dirty dir_block with newly created directory inode

commit f9287c1f2d329f4d78a3bbc9cf0db0ebae6f146a upstream.

ext4_mkdir calls ext4_handle_dirty_metadata with dir_block and the inode "dir".
Unfortunately, dir_block belongs to the newly created directory (which is
"inode"), not the parent directory (which is "dir").  Fix the incorrect
association.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext4: ext4_rename should dirty dir_bh with the correct directory
Darrick J. Wong [Wed, 31 Aug 2011 15:58:51 +0000]
ext4: ext4_rename should dirty dir_bh with the correct directory

commit bcaa992975041e40449be8c010c26192b8c8b409 upstream.

When ext4_rename performs a directory rename (move), dir_bh is a
buffer that is modified to update the '..' link in the directory being
moved (old_inode).  However, ext4_handle_dirty_metadata is called with
the old parent directory inode (old_dir) and dir_bh, which is
incorrect because dir_bh does not belong to the parent inode.  Fix
this error.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoext2,ext3,ext4: don't inherit APPEND_FL or IMMUTABLE_FL for new inodes
Theodore Ts'o [Wed, 31 Aug 2011 15:54:51 +0000]
ext2,ext3,ext4: don't inherit APPEND_FL or IMMUTABLE_FL for new inodes

commit 1cd9f0976aa4606db8d6e3dc3edd0aca8019372a upstream.

This doesn't make much sense, and it exposes a bug in the kernel where
attempts to create a new file in an append-only directory using
O_CREAT will fail (but still leave a zero-length file).  This was
discovered when xfstests #79 was generalized so it could run on all
file systems.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/power/ds2780_battery.c: fix deadlock upon insertion and removal
Clifton Barnes [Wed, 2 Nov 2011 20:39:55 +0000]
drivers/power/ds2780_battery.c: fix deadlock upon insertion and removal

commit 0e053fcbbbc4d945247cb32cad2767b483cb65f8 upstream.

Fixes the deadlock when inserting and removing the ds2780.

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/power/ds2780_battery.c: add a nolock function to w1 interface
Clifton Barnes [Wed, 2 Nov 2011 20:39:52 +0000]
drivers/power/ds2780_battery.c: add a nolock function to w1 interface

commit 9fe678fa2feb4aaac0b4220de63e1b7f8ccebae6 upstream.

Adds a nolock function to the w1 interface to avoid locking the
mutex if needed.

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/power/ds2780_battery.c: create central point for calling w1 interface
Clifton Barnes [Wed, 2 Nov 2011 20:39:50 +0000]
drivers/power/ds2780_battery.c: create central point for calling w1 interface

commit 853eee72f74f449797f0500ea19fc1bf497428d8 upstream.

Simply creates one point to call the w1 interface.

Signed-off-by: Clifton Barnes <cabarnes@indesign-llc.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agohwspinlock/core: use a mutex to protect the radix tree
Juan Gutierrez [Tue, 6 Sep 2011 06:30:16 +0000]
hwspinlock/core: use a mutex to protect the radix tree

commit 93b465c2e186d96fb90012ba0f9372eb9952e732 upstream.

Since we're using non-atomic radix tree allocations, we
should be protecting the tree using a mutex and not a
spinlock.

Non-atomic allocations and process context locking is good enough,
as the tree is manipulated only when locks are registered/
unregistered/requested/freed.

The locks themselves are still protected by spinlocks of course,
and mutexes are not involved in the locking/unlocking paths.

Signed-off-by: Juan Gutierrez <jgutierrez@ti.com>
[ohad@wizery.com: rewrite the commit log, #include mutex.h, add minor
commentary]
[ohad@wizery.com: update register/unregister parts in hwspinlock.txt]
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/net/rionet.c: fix ethernet address macros for LE platforms
Alexandre Bounine [Wed, 2 Nov 2011 20:39:15 +0000]
drivers/net/rionet.c: fix ethernet address macros for LE platforms

commit e0c87bd95e8dad455c23bc56513af8dcb1737e55 upstream.

Modify Ethernet addess macros to be compatible with BE/LE platforms

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Add missing static ADC tables for ALC269 quirks
Takashi Iwai [Thu, 3 Nov 2011 14:56:55 +0000]
ALSA: hda - Add missing static ADC tables for ALC269 quirks

[There is no upstream commit for this patch since the corresponding
code was removed from 3.2 kernel.  This is a regression found only in
3.1 kernel, so please apply this only to 3.1.x series.]

Some ALC269 quirks define their own .cap_mixer field but without the
static adc_nids[].  This resulted in the mismatch of ADC because ALC269
may have the widget 0x07 for another audio-in, and the auto-parser picks
this up instead.

This patch fixes the problem by adding the static adc_nids[] and co
again to these entries.

Tested-by: Chris Vine <chris@cvine.freeserve.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agobinfmt_elf: fix PIE execution with randomization disabled
Jiri Kosina [Wed, 2 Nov 2011 20:37:41 +0000]
binfmt_elf: fix PIE execution with randomization disabled

commit a3defbe5c337dbc6da911f8cc49ae3cc3b49b453 upstream.

The case of address space randomization being disabled in runtime through
randomize_va_space sysctl is not treated properly in load_elf_binary(),
resulting in SIGKILL coming at exec() time for certain PIE-linked binaries
in case the randomization has been disabled at runtime prior to calling
exec().

Handle the randomize_va_space == 0 case the same way as if we were not
supporting .text randomization at all.

Based on original patch by H.J. Lu and Josh Boyer.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: H.J. Lu <hongjiu.lu@intel.com>
Cc: <stable@kernel.org>
Tested-by: Josh Boyer <jwboyer@redhat.com>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomm: thp: tail page refcounting fix
Andrea Arcangeli [Wed, 2 Nov 2011 20:36:59 +0000]
mm: thp: tail page refcounting fix

commit 70b50f94f1644e2aa7cb374819cfd93f3c28d725 upstream.

Michel while working on the working set estimation code, noticed that
calling get_page_unless_zero() on a random pfn_to_page(random_pfn)
wasn't safe, if the pfn ended up being a tail page of a transparent
hugepage under splitting by __split_huge_page_refcount().

He then found the problem could also theoretically materialize with
page_cache_get_speculative() during the speculative radix tree lookups
that uses get_page_unless_zero() in SMP if the radix tree page is freed
and reallocated and get_user_pages is called on it before
page_cache_get_speculative has a chance to call get_page_unless_zero().

So the best way to fix the problem is to keep page_tail->_count zero at
all times.  This will guarantee that get_page_unless_zero() can never
succeed on any tail page.  page_tail->_mapcount is guaranteed zero and
is unused for all tail pages of a compound page, so we can simply
account the tail page references there and transfer them to
tail_page->_count in __split_huge_page_refcount() (in addition to the
head_page->_mapcount).

While debugging this s/_count/_mapcount/ change I also noticed get_page is
called by direct-io.c on pages returned by get_user_pages.  That wasn't
entirely safe because the two atomic_inc in get_page weren't atomic.  As
opposed to other get_user_page users like secondary-MMU page fault to
establish the shadow pagetables would never call any superflous get_page
after get_user_page returns.  It's safer to make get_page universally safe
for tail pages and to use get_page_foll() within follow_page (inside
get_user_pages()).  get_page_foll() is safe to do the refcounting for tail
pages without taking any locks because it is run within PT lock protected
critical sections (PT lock for pte and page_table_lock for
pmd_trans_huge).

The standard get_page() as invoked by direct-io instead will now take
the compound_lock but still only for tail pages.  The direct-io paths
are usually I/O bound and the compound_lock is per THP so very
finegrined, so there's no risk of scalability issues with it.  A simple
direct-io benchmarks with all lockdep prove locking and spinlock
debugging infrastructure enabled shows identical performance and no
overhead.  So it's worth it.  Ideally direct-io should stop calling
get_page() on pages returned by get_user_pages().  The spinlock in
get_page() is already optimized away for no-THP builds but doing
get_page() on tail pages returned by GUP is generally a rare operation
and usually only run in I/O paths.

This new refcounting on page_tail->_mapcount in addition to avoiding new
RCU critical sections will also allow the working set estimation code to
work without any further complexity associated to the tail page
refcounting with THP.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotg3: fix tigon3_dma_hwbug_workaround()
Eric Dumazet [Sat, 22 Oct 2011 07:29:53 +0000]
tg3: fix tigon3_dma_hwbug_workaround()

[ Upstream commit f7ff19871bb4a3451e1ca2cf660bf633018cfbec ]

Ari got kernel panics using tg3 NIC, and bisected to 2669069aacc9 "tg3:
enable transmit time stamping."

This is because tigon3_dma_hwbug_workaround() might alloc a new skb and
free the original. We panic when skb_tx_timestamp() is called on freed
skb.

Reported-by: Ari Savolainen <ari.m.savolainen@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoipv6: fix route error binding peer in func icmp6_dst_alloc
Gao feng [Fri, 28 Oct 2011 02:46:57 +0000]
ipv6: fix route error binding peer in func icmp6_dst_alloc

[ Upstream commit 7011687f0f2f12cc348f6a693fafe63d89167eac ]

in func icmp6_dst_alloc,dst_metric_set call ipv6_cow_metrics to set metric.
ipv6_cow_metrics may will call rt6_bind_peer to set rt6_info->rt6i_peer.
So,we should move ipv6_addr_copy before dst_metric_set to make sure rt6_bind_peer success.

Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoipv4: fix ipsec forward performance regression
Yan, Zheng [Sat, 22 Oct 2011 21:58:20 +0000]
ipv4: fix ipsec forward performance regression

[ Upstream commit b73233960a59ee66e09d642f13d0592b13651e94 ]

There is bug in commit 5e2b61f(ipv4: Remove flowi from struct rtable).
It makes xfrm4_fill_dst() modify wrong data structure.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Reported-by: Kim Phillips <kim.phillips@freescale.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agojsm: remove buggy write queue
Thadeu Lima de Souza Cascardo [Wed, 24 Aug 2011 16:14:22 +0000]
jsm: remove buggy write queue

commit 9d898966c4a07e4a5092215b5a2829d0ef02baa2 upstream.

jsm uses a write queue that copies from uart_core circular buffer. This
copying however has some bugs, like not wrapping the head counter. Since
this write queue is also a circular buffer, the consumer function is
ready to use the uart_core circular buffer directly.

This buggy copying function was making some bytes be dropped when
transmitting to a raw tty, doing something like this.

[root@hostname ~]$ cat /dev/ttyn1 > cascardo/dump &
[1] 2658
[root@hostname ~]$ cat /proc/tty/drivers > /dev/ttyn0
[root@hostname ~]$ cat /proc/tty/drivers
/dev/tty             /dev/tty        5       0 system:/dev/tty
/dev/console         /dev/console    5       1 system:console
/dev/ptmx            /dev/ptmx       5       2 system
/dev/vc/0            /dev/vc/0       4       0 system:vtmaster
jsm                  /dev/ttyn     250 0-31 serial
serial               /dev/ttyS       4 64-95 serial
hvc                  /dev/hvc      229 0-7 system
pty_slave            /dev/pts      136 0-1048575 pty:slave
pty_master           /dev/ptm      128 0-1048575 pty:master
unknown              /dev/tty        4 1-63 console
[root@hostname ~]$ cat cascardo/dump
/dev/tty             /dev/tty        5       0 system:/dev/tty
/dev/console         /dev/console    5       1 system:console
/dev/ptmx            /dev/ptmx       5       2 system
/dev/vc/0            /dev/vc/0       4       0 system:vtmaste[root@hostname ~]$

This patch drops the driver write queue entirely, using the circular
buffer from uart_core only.

Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoOMAP: SPI: Fix the trying to free nonexistent resource error
Shubhrajyoti D [Mon, 24 Oct 2011 10:24:24 +0000]
OMAP: SPI: Fix the trying to free nonexistent resource error

commit 1458d160de3f1862aeaac57447ba96e7857ac52b upstream.

Currently there is a request_mem_region(r->start, ..
followed by r->start += pdata->regs_offset;

And then in remove

   r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
   release_mem_region(r->start, resource_size(r));

Here the offset addition is not taken care. Fix the code for the
same.

Signed-off-by: Shubhrajyoti D <shubhrajyoti@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoum: Fix kmalloc argument order in um/vdso/vma.c
Dave Jones [Mon, 24 Oct 2011 22:15:32 +0000]
um: Fix kmalloc argument order in um/vdso/vma.c

commit 0d65ede0a605d6252acc5c8a9c536c4cd0211f3c upstream.

kmalloc size is 1st arg, not second.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoreadlinkat: ensure we return ENOENT for the empty pathname for normal lookups
Andy Whitcroft [Wed, 2 Nov 2011 08:44:39 +0000]
readlinkat: ensure we return ENOENT for the empty pathname for normal lookups

commit 1fa1e7f615f4d3ae436fa319af6e4eebdd4026a8 upstream.

Since the commit below which added O_PATH support to the *at() calls, the
error return for readlink/readlinkat for the empty pathname has switched
from ENOENT to EINVAL:

  commit 65cfc6722361570bfe255698d9cd4dccaf47570d
  Author: Al Viro <viro@zeniv.linux.org.uk>
  Date:   Sun Mar 13 15:56:26 2011 -0400

    readlinkat(), fchownat() and fstatat() with empty relative pathnames

This is both unexpected for userspace and makes readlink/readlinkat
inconsistant with all other interfaces; and inconsistant with our stated
return for these pathnames.

As the readlinkat call does not have a flags parameter we cannot use the
AT_EMPTY_PATH approach used in the other calls.  Therefore expose whether
the original path is infact entry via a new user_path_at_empty() path
lookup function.  Use this to determine whether to default to EINVAL or
ENOENT for failures.

Addresses http://bugs.launchpad.net/bugs/817187

[akpm@linux-foundation.org: remove unused getname_flags()]
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoum: fix ubd cow size
Richard Weinberger [Wed, 2 Nov 2011 12:17:27 +0000]
um: fix ubd cow size

commit 8535639810e578960233ad39def3ac2157b0c3ec upstream.

ubd_file_size() cannot use ubd_dev->cow.file because at this time
ubd_dev->cow.file is not initialized.
Therefore, ubd_file_size() will always report a wrong disk size when
COW files are used.
Reading from /dev/ubd* would crash the kernel.

We have to read the correct disk size from the COW file's backing
file.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoiwlagn: do not use interruptible waits
Johannes Berg [Thu, 15 Sep 2011 18:46:52 +0000]
iwlagn: do not use interruptible waits

commit effd4d9aece9184f526e6556786a94d335e38b71 upstream.

Since the dawn of its time, iwlwifi has used
interruptible waits to wait for synchronous
commands and firmware loading.

This leads to "interesting" bugs, because it
can't actually handle the interruptions; for
example when a command sending is interrupted
it will assume the command completed fully,
and then leave it pending, which leads to all
kinds of trouble when the command finishes
later.

Since there's no easy way to gracefully deal
with interruptions, fix the driver to not use
interruptible waits.

This at least fixes the error
iwlagn 0000:02:00.0: Error: Response NULL in  'REPLY_SCAN_ABORT_CMD'

I have seen in P2P testing, but it is likely
that there are other errors caused by this.

Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoALSA: hda - Fix ADC input-amp handling for Cx20549 codec
Takashi Iwai [Fri, 14 Oct 2011 13:26:20 +0000]
ALSA: hda - Fix ADC input-amp handling for Cx20549 codec

commit 6b45214277bec2193ad3ccb8d7aa6100b5a0f1a9 upstream.

It seems that Conexant CX20549 chip handle only a single input-amp even
though the audio-input widget has multiple sources.  This has been never
clear, and I implemented in the current way based on the debug information
I got at the early time -- the device reacts individual input-amp values
for different sources.  This is true for another Conexant codec, but it's
not applied to CX20549 actually.

This patch changes the auto-parser code to handle a single input-amp
per audio-in widget for CX20549.  After applying this, you'll see only a
single "Capture" volume control instead of separate "Mic" or "Line"
captures when the device is set up to use a single ADC.

We haven't tested 20551 and 20561 codecs yet.  If these show the similar
behavior like 20549, they need to set spec->single_adc_amp=1, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomm: avoid null pointer access in vm_struct via /proc/vmallocinfo
Mitsuo Hayasaka [Tue, 1 Nov 2011 00:08:13 +0000]
mm: avoid null pointer access in vm_struct via /proc/vmallocinfo

commit f5252e009d5b87071a919221e4f6624184005368 upstream.

The /proc/vmallocinfo shows information about vmalloc allocations in
vmlist that is a linklist of vm_struct.  It, however, may access pages
field of vm_struct where a page was not allocated.  This results in a null
pointer access and leads to a kernel panic.

Why this happens: In __vmalloc_node_range() called from vmalloc(), newly
allocated vm_struct is added to vmlist at __get_vm_area_node() and then,
some fields of vm_struct such as nr_pages and pages are set at
__vmalloc_area_node().  In other words, it is added to vmlist before it is
fully initialized.  At the same time, when the /proc/vmallocinfo is read,
it accesses the pages field of vm_struct according to the nr_pages field
at show_numa_info().  Thus, a null pointer access happens.

The patch adds the newly allocated vm_struct to the vmlist *after* it is
fully initialized.  So, it can avoid accessing the pages field with
unallocated page when show_numa_info() is called.

Signed-off-by: Mitsuo Hayasaka <mitsuo.hayasaka.hu@hitachi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoARM: mach-ux500: unlock I&D l2x0 caches before init
Linus Walleij [Fri, 12 Aug 2011 11:54:42 +0000]
ARM: mach-ux500: unlock I&D l2x0 caches before init

commit 1bf6d2c1bb23533af6930581cc39b74685bc29de upstream.

Apparently U8500 U-Boot versions may leave the l2x0 locked down
before executing the kernel. Make sure we unlock it before we
initialize the l2x0. This fixes a performance problem reported
by Jan Rinze.

The l2x0 core has been modified to unlock the l2x0 by default,
but it will not touch the locking registers if the l2x0 was
already enabled, as on the ux500, so we need this quirk to
make sure it is properly turned off.

Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Rabin Vincent <rabin.vincent@stericsson.com>
Cc: Adrian Bunk <adrian.bunk@movial.com>
Reported-by: Jan Rinze <janrinze@gmail.com>
Tested-by: Robert Marklund <robert.marklund@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoARM: pxa/cm-x300: properly set bt_reset pin
Axel Lin [Sat, 17 Sep 2011 14:15:34 +0000]
ARM: pxa/cm-x300: properly set bt_reset pin

commit 1a64200ec5e93be03e27c3b2fc332e04ae443eb2 upstream.

Fix below build warning and properly set bt_reset pin.

CC arch/arm/mach-pxa/cm-x300.o
arch/arm/mach-pxa/cm-x300.c: In function 'cm_x300_init_wi2wi':
arch/arm/mach-pxa/cm-x300.c:779: warning: unused variable 'wlan_en'
arch/arm/mach-pxa/cm-x300.c:795: warning: 'bt_reset' may be used uninitialized in this function

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoplat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired
Paul Fertser [Mon, 10 Oct 2011 07:19:23 +0000]
plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired

commit 6571534b600b8ca1936ff5630b9e0947f21faf16 upstream.

To configure pads during the initialisation a set of special constants
is used, e.g.
#define MX25_PAD_FEC_MDIO__FEC_MDIO IOMUX_PAD(0x3c4, 0x1cc, 0x10, 0, 0, PAD_CTL_HYS | PAD_CTL_PUS_22K_UP)

The problem is that no pull-up/down is getting activated unless both
PAD_CTL_PUE (pull-up enable) and PAD_CTL_PKE (pull/keeper module
enable) set. This is clearly stated in the i.MX25 datasheet and is
confirmed by the measurements on hardware. This leads to some rather
hard to understand bugs such as misdetecting an absent ethernet PHY (a
real bug i had), unstable data transfer etc. This might affect mx25,
mx35, mx50, mx51 and mx53 SoCs.

It's reasonable to expect that if the pullup value is specified, the
intention was to have it actually active, so we implicitly add the
needed bits.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomd/raid10: Fix bug when activating a hot-spare.
NeilBrown [Mon, 31 Oct 2011 01:59:44 +0000]
md/raid10: Fix bug when activating a hot-spare.

commit 7fcc7c8acf0fba44d19a713207af7e58267c1179 upstream.

This is a fairly serious bug in RAID10.

When a RAID10 array is degraded and a hot-spare is activated, the
spare does not take up the empty slot, but rather replaces the first
working device.
This is likely to make the array non-functional.   It would normally
be possible to recover the data, but that would need care and is not
guaranteed.

This bug was introduced in commit
   2bb77736ae5dca0a189829fbb7379d43364a9dac
which first appeared in 3.1.

Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years ago/proc/self/numa_maps: restore "huge" tag for hugetlb vmas
Andrew Morton [Tue, 1 Nov 2011 00:06:32 +0000]
/proc/self/numa_maps: restore "huge" tag for hugetlb vmas

commit fc360bd9cdcf875639a77f07fafec26699c546f3 upstream.

The display of the "huge" tag was accidentally removed in 29ea2f698 ("mm:
use walk_page_range() instead of custom page table walking code").

Reported-by: Stephen Hemminger <shemminger@vyatta.com>
Tested-by: Stephen Hemminger <shemminger@vyatta.com>
Reviewed-by: Stephen Wilson <wilsons@start.ca>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotuner_xc2028: Allow selection of the frequency adjustment code for XC3028
Mauro Carvalho Chehab [Thu, 28 Jul 2011 19:38:54 +0000]
tuner_xc2028: Allow selection of the frequency adjustment code for XC3028

commit 9bed77ee2fb46b74782d0d9d14b92e9d07f3df6e upstream.

This device is not using the proper demod IF. Instead of using the
IF macro, it is specifying a IF frequency. This doesn't work, as xc3028
needs to load an specific SCODE for the tuner. In this case, there's
no IF table for 5 MHz.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodib0700: protect the dib0700 buffer access
Olivier Grenie [Mon, 1 Aug 2011 15:45:58 +0000]
dib0700: protect the dib0700 buffer access

commit bff469f4167fdabfe15294f375577d7eadbaa1bb upstream.

This patch protects the common buffer access inside the dib0700 in order
to manage concurrent access. This protection is done using mutex.

Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Javier Marcet <javier@marcet.info>
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <patrick.boettcher@dibcom.fr>
[mchehab@redhat.com: dprint requires 3 arguments. Replaced by dib_info]
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoDiBcom: protect the I2C bufer access
Patrick Boettcher [Wed, 3 Aug 2011 15:08:21 +0000]
DiBcom: protect the I2C bufer access

commit 79fcce3230b140f7675f8529ee53fe2f9644f902 upstream.

This patch protects the I2C buffer access in order to manage concurrent
access. This protection is done using mutex.
Furthermore, for the dib9000, if a pid filtering command is
received during the tuning, this pid filtering command is delayed to
avoid any concurrent access issue.

Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Cc: Florian Mickler <florian@mickler.org>
Signed-off-by: Olivier Grenie <olivier.grenie@dibcom.fr>
Signed-off-by: Patrick Boettcher <Patrick.Boettcher@dibcom.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoviafb: improve pitch handling
Florian Tobias Schandinat [Mon, 6 Jun 2011 01:27:34 +0000]
viafb: improve pitch handling

commit 936a3f770b8de7042d793272f008ef1bb08522e9 upstream.

This patch adds checks for minimum and maximum pitch size to prevent
invalid settings which could otherwise crash the machine. Also the
alignment is done in a slightly more readable way.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoviafb: use display information in info not in var for panning
Florian Tobias Schandinat [Mon, 23 May 2011 21:39:58 +0000]
viafb: use display information in info not in var for panning

commit d933990c57b498c092ceef591c7c5d69dbfe9f30 upstream.

As Laurent pointed out we must not use any information in the passed
var besides xoffset, yoffset and vmode as otherwise applications
might abuse it. Also use the aligned fix.line_length and not the
(possible) unaligned xres_virtual.

Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agofb: sh-mobile: Fix deadlock risk between lock_fb_info() and console_lock()
Bruno Prémont [Fri, 2 Sep 2011 17:24:03 +0000]
fb: sh-mobile: Fix deadlock risk between lock_fb_info() and console_lock()

commit 4a47a0e09c504e3ce0ccdb405411aefc5b09deb8 upstream.

Following on Herton's patch "fb: avoid possible deadlock caused by
fb_set_suspend" which moves lock_fb_info() out of fb_set_suspend()
to its callers, correct sh-mobile's locking around call to
fb_set_suspend() and the same sort of deaklocks with console_lock()
due to order of taking the lock.

console_lock() must be taken while fb_info is already locked and fb_info
must be locked while calling fb_set_suspend().

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agofb: avoid possible deadlock caused by fb_set_suspend
Herton Ronaldo Krzesinski [Fri, 17 Jun 2011 19:02:39 +0000]
fb: avoid possible deadlock caused by fb_set_suspend

commit 9e769ff3f585db8f978f9113be83d36c7e3965dd upstream.

A lock ordering issue can cause deadlocks: in framebuffer/console code,
all needed struct fb_info locks are taken before acquire_console_sem(),
in places which need to take console semaphore.

But fb_set_suspend is always called with console semaphore held, and
inside it we call lock_fb_info which gets the fb_info lock, inverse
locking order of what the rest of the code does. This causes a real
deadlock issue, when we write to state fb sysfs attribute (which calls
fb_set_suspend) while a framebuffer is being unregistered by
remove_conflicting_framebuffers, as can be shown by following show
blocked state trace on a test program which loads i915 and runs another
forked processes writing to state attribute:

Test process with semaphore held and trying to get fb_info lock:
..
fb-test2      D 0000000000000000     0   237    228 0x00000000
 ffff8800774f3d68 0000000000000082 00000000000135c0 00000000000135c0
 ffff880000000000 ffff8800774f3fd8 ffff8800774f3fd8 ffff880076ee4530
 00000000000135c0 ffff8800774f3fd8 ffff8800774f2000 00000000000135c0
Call Trace:
 [<ffffffff8141287a>] __mutex_lock_slowpath+0x11a/0x1e0
 [<ffffffff814142f2>] ? _raw_spin_lock_irq+0x22/0x40
 [<ffffffff814123d3>] mutex_lock+0x23/0x50
 [<ffffffff8125dfc5>] lock_fb_info+0x25/0x60
 [<ffffffff8125e3f0>] fb_set_suspend+0x20/0x80
 [<ffffffff81263e2f>] store_fbstate+0x4f/0x70
 [<ffffffff812e7f70>] dev_attr_store+0x20/0x30
 [<ffffffff811c46b4>] sysfs_write_file+0xd4/0x160
 [<ffffffff81155a26>] vfs_write+0xc6/0x190
 [<ffffffff81155d51>] sys_write+0x51/0x90
 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b
..
modprobe process stalled because has the fb_info lock (got inside
unregister_framebuffer) but waiting for the semaphore held by the
test process which is waiting to get the fb_info lock:
..
modprobe      D 0000000000000000     0   230    218 0x00000000
 ffff880077a4d618 0000000000000082 0000000000000001 0000000000000001
 ffff880000000000 ffff880077a4dfd8 ffff880077a4dfd8 ffff8800775a2e20
 00000000000135c0 ffff880077a4dfd8 ffff880077a4c000 00000000000135c0
Call Trace:
 [<ffffffff81411fe5>] schedule_timeout+0x215/0x310
 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50
 [<ffffffff814130dd>] __down+0x6d/0xb0
 [<ffffffff81089f71>] down+0x41/0x50
 [<ffffffff810629ac>] acquire_console_sem+0x2c/0x50
 [<ffffffff812ca53d>] unbind_con_driver+0xad/0x2d0
 [<ffffffff8126f5f7>] fbcon_event_notify+0x457/0x890
 [<ffffffff814144ff>] ? _raw_spin_unlock_irqrestore+0x1f/0x50
 [<ffffffff81058051>] ? get_parent_ip+0x11/0x50
 [<ffffffff8141836d>] notifier_call_chain+0x4d/0x70
 [<ffffffff8108a3b8>] __blocking_notifier_call_chain+0x58/0x80
 [<ffffffff8108a3f6>] blocking_notifier_call_chain+0x16/0x20
 [<ffffffff8125dabb>] fb_notifier_call_chain+0x1b/0x20
 [<ffffffff8125e6ac>] unregister_framebuffer+0x7c/0x130
 [<ffffffff8125e8b3>] remove_conflicting_framebuffers+0x153/0x180
 [<ffffffff8125eef3>] register_framebuffer+0x93/0x2c0
 [<ffffffffa0331112>] drm_fb_helper_single_fb_probe+0x252/0x2f0 [drm_kms_helper]
 [<ffffffffa03314a3>] drm_fb_helper_initial_config+0x2f3/0x6d0 [drm_kms_helper]
 [<ffffffffa03318dd>] ? drm_fb_helper_single_add_all_connectors+0x5d/0x1c0 [drm_kms_helper]
 [<ffffffffa037b588>] intel_fbdev_init+0xa8/0x160 [i915]
 [<ffffffffa0343d74>] i915_driver_load+0x854/0x12b0 [i915]
 [<ffffffffa02f0e7e>] drm_get_pci_dev+0x19e/0x360 [drm]
 [<ffffffff8141821d>] ? sub_preempt_count+0x9d/0xd0
 [<ffffffffa0386f91>] i915_pci_probe+0x15/0x17 [i915]
 [<ffffffff8124481f>] local_pci_probe+0x5f/0xd0
 [<ffffffff81244f89>] pci_device_probe+0x119/0x120
 [<ffffffff812eccaa>] ? driver_sysfs_add+0x7a/0xb0
 [<ffffffff812ed003>] driver_probe_device+0xa3/0x290
 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0
 [<ffffffff812ed29b>] __driver_attach+0xab/0xb0
 [<ffffffff812ed1f0>] ? __driver_attach+0x0/0xb0
 [<ffffffff812ebd3e>] bus_for_each_dev+0x5e/0x90
 [<ffffffff812ecc2e>] driver_attach+0x1e/0x20
 [<ffffffff812ec6f2>] bus_add_driver+0xe2/0x320
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffff812ed536>] driver_register+0x76/0x140
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffff81245216>] __pci_register_driver+0x56/0xd0
 [<ffffffffa02f1264>] drm_pci_init+0xe4/0xf0 [drm]
 [<ffffffffa03aa000>] ? i915_init+0x0/0x96 [i915]
 [<ffffffffa02e84a8>] drm_init+0x58/0x70 [drm]
 [<ffffffffa03aa094>] i915_init+0x94/0x96 [i915]
 [<ffffffff81002194>] do_one_initcall+0x44/0x190
 [<ffffffff810a066b>] sys_init_module+0xcb/0x210
 [<ffffffff8100c012>] system_call_fastpath+0x16/0x1b
..

fb-test2 which reproduces above is available on kernel.org bug #26232.
To solve this issue, avoid calling lock_fb_info inside fb_set_suspend,
and move it out to where needed (callers of fb_set_suspend must call
lock_fb_info before if needed). So far, the only place which needs to
call lock_fb_info is store_fbstate, all other places which calls
fb_set_suspend are suspend/resume hooks that should not need the lock as
they should be run only when processes are already frozen in
suspend/resume.

References: https://bugzilla.kernel.org/show_bug.cgi?id=26232
Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agocarminefb: Fix module parameters permissions
Jean Delvare [Fri, 8 Jul 2011 09:04:38 +0000]
carminefb: Fix module parameters permissions

commit c84c14224bbca6ec60d5851fcc87be0e34df2f44 upstream.

The third parameter of module_param is supposed to be an octal value.
The missing leading "0" causes the following:

$ ls -l /sys/module/carminefb/parameters/
total 0
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_displays
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_mode
-rw-rwxr-- 1 root root 4096 Jul  8 08:55 fb_mode_str

After fixing the perm parameter, we get the expected:

$ ls -l /sys/module/carminefb/parameters/
total 0
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_displays
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_mode
-r--r--r-- 1 root root 4096 Jul  8 08:56 fb_mode_str

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoiommu/amd: Fix wrong shift direction
Joerg Roedel [Tue, 11 Oct 2011 15:41:32 +0000]
iommu/amd: Fix wrong shift direction

commit fcd0861db1cf4e6ed99f60a815b7b72c2ed36ea4 upstream.

The shift direction was wrong because the function takes a
page number and i is the address is the loop.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoWMI: properly cleanup devices to avoid crashes
Dmitry Torokhov [Wed, 7 Sep 2011 22:00:02 +0000]
WMI: properly cleanup devices to avoid crashes

commit 023b9565972a4a5e0f01b9aa32680af6e9b5c388 upstream.

We need to remove devices that we destroy from the list, otherwise
we'll crash if there are more than one "_WDG" methods in DSDT.

This fixes https://bugzilla.kernel.org/show_bug.cgi?id=32052

Tested-by: Ilya Tumaykin <librarian_rus@yahoo.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoccwgroup: move attributes to attribute group
Sebastian Ott [Sun, 30 Oct 2011 14:16:52 +0000]
ccwgroup: move attributes to attribute group

commit dbdf1afcaaabe83dea15a3cb9b9013e73ae3b1ad upstream.

Put sysfs attributes of ccwgroup devices in an attribute group to
ensure that these attributes are actually present when userspace
is notified via uevents.

Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomemory leak with RCU_TABLE_FREE
Martin Schwidefsky [Sun, 30 Oct 2011 14:16:08 +0000]
memory leak with RCU_TABLE_FREE

commit e73b7fffe487c315fd1a4fa22282e3362b440a06 upstream.

The rcu page table free code uses a couple of bits in the page table
pointer passed to tlb_remove_table to discern the different page table
types. __tlb_remove_table extracts the type with an incorrect mask which
leads to memory leaks. The correct mask is ((FRAG_MASK << 4) | FRAG_MASK).

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agouser per registers vs. ptrace single stepping
Martin Schwidefsky [Sun, 30 Oct 2011 14:16:07 +0000]
user per registers vs. ptrace single stepping

commit a45aff5285871bf7be1781d9462d3fdbb6c913f9 upstream.

git commit 5e9a2692 "[S390] ptrace cleanup" introduced a regression
for the case when both a user PER set (e.g. a storage alteration trace) and
PTRACE_SINGLESTEP are active. The new code will overrule the user PER set
with a instruction-fetch PER set over the whole address space for ptrace
single stepping. The inferior process will be stopped after each instruction
with an instruction fetch event. Any other events that may have occurred
concurrently are not reported (e.g. storage alteration event) because the
control bits for them are not set. The solution is to merge the PER control
bits of the user PER set with the PER_EVENT_IFETCH control bit for
PTRACE_SINGLESTEP.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoKVM: s390: check cpu_id prior to using it
Carsten Otte [Tue, 18 Oct 2011 10:27:12 +0000]
KVM: s390: check cpu_id prior to using it

commit 4d47555a80495657161a7e71ec3014ff2021e450 upstream.

We use the cpu id provided by userspace as array index here. Thus we
clearly need to check it first. Ooops.

Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>