11 years agohugetlb: introduce pud_huge
Andi Kleen [Thu, 24 Jul 2008 04:27:50 +0000]
hugetlb: introduce pud_huge

Straight forward extensions for huge pages located in the PUD instead of
PMDs.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: printk cleanup
Andi Kleen [Thu, 24 Jul 2008 04:27:49 +0000]
hugetlb: printk cleanup

- Reword sentence to clarify meaning with multiple options
- Add support for using GB prefixes for the page size
- Add extra printk to delayed > MAX_ORDER allocation code

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: support boot allocate different sizes
Andi Kleen [Thu, 24 Jul 2008 04:27:48 +0000]
hugetlb: support boot allocate different sizes

Make some infrastructure changes to allow boot-time allocation of
different hugepage page sizes.

- move all basic hstate initialisation into hugetlb_add_hstate
- create a new function hugetlb_hstate_alloc_pages() to do the
  actual initial page allocations. Call this function early in
  order to allocate giant pages from bootmem.
- Check for multiple hugepages= parameters

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Acked-by: Andrew Hastings <abh@cray.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: support larger than MAX_ORDER
Andi Kleen [Thu, 24 Jul 2008 04:27:47 +0000]
hugetlb: support larger than MAX_ORDER

This is needed on x86-64 to handle GB pages in hugetlbfs, because it is
not practical to enlarge MAX_ORDER to 1GB.

Instead the 1GB pages are only allocated at boot using the bootmem
allocator using the hugepages=...  option.

These 1G bootmem pages are never freed.  In theory it would be possible to
implement that with some complications, but since it would be a one-way
street (>= MAX_ORDER pages cannot be allocated later) I decided not to
currently.

The >= MAX_ORDER code is not ifdef'ed per architecture.  It is not very
big and the ifdef uglyness seemed not be worth it.

Known problems: /proc/meminfo and "free" do not display the memory
allocated for gb pages in "Total".  This is a little confusing for the
user.

Acked-by: Andrew Hastings <abh@cray.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: export prep_compound_page to mm
Andi Kleen [Thu, 24 Jul 2008 04:27:46 +0000]
mm: export prep_compound_page to mm

hugetlb will need to get compound pages from bootmem to handle the case of
them being greater than or equal to MAX_ORDER.  Export the constructor
function needed for this.

Acked-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: introduce non panic alloc_bootmem
Andi Kleen [Thu, 24 Jul 2008 04:27:45 +0000]
mm: introduce non panic alloc_bootmem

Straight forward variant of the existing __alloc_bootmem_node, only
subsequent patch when allocating giant hugepages at boot -- don't want to
panic if we can't allocate as many as the user asked for.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: abstract numa round robin selection
Andi Kleen [Thu, 24 Jul 2008 04:27:45 +0000]
hugetlb: abstract numa round robin selection

Need this as a separate function for a future patch.

No behaviour change.

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: new sysfs interface
Nishanth Aravamudan [Thu, 24 Jul 2008 04:27:44 +0000]
hugetlb: new sysfs interface

Provide new hugepages user APIs that are more suited to multiple hstates
in sysfs.  There is a new directory, /sys/kernel/hugepages.  Underneath
that directory there will be a directory per-supported hugepage size,
e.g.:

/sys/kernel/hugepages/hugepages-64kB
/sys/kernel/hugepages/hugepages-16384kB
/sys/kernel/hugepages/hugepages-16777216kB

corresponding to 64k, 16m and 16g respectively.  Within each
hugepages-size directory there are a number of files, corresponding to the
tracked counters in the hstate, e.g.:

/sys/kernel/hugepages/hugepages-64/nr_hugepages
/sys/kernel/hugepages/hugepages-64/nr_overcommit_hugepages
/sys/kernel/hugepages/hugepages-64/free_hugepages
/sys/kernel/hugepages/hugepages-64/resv_hugepages
/sys/kernel/hugepages/hugepages-64/surplus_hugepages

Of these files, the first two are read-write and the latter three are
read-only.  The size of the hugepage being manipulated is trivially
deducible from the enclosing directory and is always expressed in kB (to
match meminfo).

[dave@linux.vnet.ibm.com: fix build]
[nacc@us.ibm.com: hugetlb: hang off of /sys/kernel/mm rather than /sys/kernel]
[nacc@us.ibm.com: hugetlb: remove CONFIG_SYSFS dependency]
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Dave Hansen <dave@linux.vnet.ibm.com>
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlbfs: per mount huge page sizes
Andi Kleen [Thu, 24 Jul 2008 04:27:43 +0000]
hugetlbfs: per mount huge page sizes

Add the ability to configure the hugetlb hstate used on a per mount basis.

- Add a new pagesize= option to the hugetlbfs mount that allows setting
  the page size
- This option causes the mount code to find the hstate corresponding to the
  specified size, and sets up a pointer to the hstate in the mount's
  superblock.
- Change the hstate accessors to use this information rather than the
  global_hstate they were using (requires a slight change in mm/memory.c
  so we don't NULL deref in the error-unmap path -- see comments).

[np: take hstate out of hugetlbfs inode and vma->vm_private_data]

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: multiple hstates for multiple page sizes
Andi Kleen [Thu, 24 Jul 2008 04:27:42 +0000]
hugetlb: multiple hstates for multiple page sizes

Add basic support for more than one hstate in hugetlbfs.  This is the key
to supporting multiple hugetlbfs page sizes at once.

- Rather than a single hstate, we now have an array, with an iterator
- default_hstate continues to be the struct hstate which we use by default
- Add functions for architectures to register new hstates

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: modular state for hugetlb page size
Andi Kleen [Thu, 24 Jul 2008 04:27:41 +0000]
hugetlb: modular state for hugetlb page size

The goal of this patchset is to support multiple hugetlb page sizes.  This
is achieved by introducing a new struct hstate structure, which
encapsulates the important hugetlb state and constants (eg.  huge page
size, number of huge pages currently allocated, etc).

The hstate structure is then passed around the code which requires these
fields, they will do the right thing regardless of the exact hstate they
are operating on.

This patch adds the hstate structure, with a single global instance of it
(default_hstate), and does the basic work of converting hugetlb to use the
hstate.

Future patches will add more hstate structures to allow for different
hugetlbfs mounts to have different page sizes.

[akpm@linux-foundation.org: coding-style fixes]
Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: factor out prep_new_huge_page
Andi Kleen [Thu, 24 Jul 2008 04:27:40 +0000]
hugetlb: factor out prep_new_huge_page

Needed to avoid code duplication in follow up patches.

Acked-by: Adam Litke <agl@us.ibm.com>
Acked-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: create /sys/kernel/mm
Nishanth Aravamudan [Thu, 24 Jul 2008 04:27:39 +0000]
mm: create /sys/kernel/mm

Add a kobject to create /sys/kernel/mm when sysfs is mounted.  The kobject
will exist regardless.  This will allow for the hugepage related sysfs
directories to exist under the mm "subsystem" directory.  Add an ABI file
appropriately.

[kosaki.motohiro@jp.fujitsu.com: fix build]
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: remove mm_init compilation dependency on CONFIG_DEBUG_MEMORY_INIT
Nishanth Aravamudan [Thu, 24 Jul 2008 04:27:39 +0000]
mm: remove mm_init compilation dependency on CONFIG_DEBUG_MEMORY_INIT

Towards the end of putting all core mm initialization in mm_init.c, I
plan on putting the creation of a mm kobject in a function in that file.
However, the file is currently only compiled if CONFIG_DEBUG_MEMORY_INIT
is set. Remove this dependency, but put the code under an #ifdef on the
same config option. This should result in no functional changes.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agovmallocinfo: add NUMA information
Eric Dumazet [Thu, 24 Jul 2008 04:27:38 +0000]
vmallocinfo: add NUMA information

Christoph recently added /proc/vmallocinfo file to get information about
vmalloc allocations.

This patch adds NUMA specific information, giving number of pages
allocated on each memory node.

This should help to check that vmalloc() is able to respect NUMA policies.

Example of output on a four nodes machine (one cpu per node)

1) network hash tables are evenly spreaded on four nodes (OK) (Same
   point for inodes and dentries hash tables)

2) iptables tables (x_tables) are correctly allocated on each cpu node
   (OK).

3) sys_swapon() allocates its memory from one node only.

4) each loaded module is using memory on one node.

Sysadmins could tune their setup to change points 3) and 4) if necessary.

grep "pages="  /proc/vmallocinfo
0xffffc20000000000-0xffffc20000201000 2101248 alloc_large_system_hash+0x204/0x2c0 pages=512 vmalloc N0=128 N1=128 N2=128 N3=128
0xffffc20000201000-0xffffc20000302000 1052672 alloc_large_system_hash+0x204/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
0xffffc2000031a000-0xffffc2000031d000   12288 alloc_large_system_hash+0x204/0x2c0 pages=2 vmalloc N1=1 N2=1
0xffffc2000031f000-0xffffc2000032b000   49152 cramfs_uncompress_init+0x2e/0x80 pages=11 vmalloc N0=3 N1=3 N2=2 N3=3
0xffffc2000033e000-0xffffc20000341000   12288 sys_swapon+0x640/0xac0 pages=2 vmalloc N0=2
0xffffc20000341000-0xffffc20000344000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N0=2
0xffffc20000344000-0xffffc20000347000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N1=2
0xffffc20000347000-0xffffc2000034a000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N2=2
0xffffc2000034a000-0xffffc2000034d000   12288 xt_alloc_table_info+0xfe/0x130 [x_tables] pages=2 vmalloc N3=2
0xffffc20004381000-0xffffc20004402000  528384 alloc_large_system_hash+0x204/0x2c0 pages=128 vmalloc N0=32 N1=32 N2=32 N3=32
0xffffc20004402000-0xffffc20004803000 4198400 alloc_large_system_hash+0x204/0x2c0 pages=1024 vmalloc vpages N0=256 N1=256 N2=256 N3=256
0xffffc20004803000-0xffffc20004904000 1052672 alloc_large_system_hash+0x204/0x2c0 pages=256 vmalloc N0=64 N1=64 N2=64 N3=64
0xffffc20004904000-0xffffc20004bec000 3047424 sys_swapon+0x640/0xac0 pages=743 vmalloc vpages N0=743
0xffffffffa0000000-0xffffffffa000f000   61440 sys_init_module+0xc27/0x1d00 pages=14 vmalloc N1=14
0xffffffffa000f000-0xffffffffa0014000   20480 sys_init_module+0xc27/0x1d00 pages=4 vmalloc N0=4
0xffffffffa0014000-0xffffffffa0017000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N0=2
0xffffffffa0017000-0xffffffffa0022000   45056 sys_init_module+0xc27/0x1d00 pages=10 vmalloc N1=10
0xffffffffa0022000-0xffffffffa0028000   24576 sys_init_module+0xc27/0x1d00 pages=5 vmalloc N3=5
0xffffffffa0028000-0xffffffffa0050000  163840 sys_init_module+0xc27/0x1d00 pages=39 vmalloc N1=39
0xffffffffa0050000-0xffffffffa0052000    8192 sys_init_module+0xc27/0x1d00 pages=1 vmalloc N1=1
0xffffffffa0052000-0xffffffffa0056000   16384 sys_init_module+0xc27/0x1d00 pages=3 vmalloc N1=3
0xffffffffa0056000-0xffffffffa0081000  176128 sys_init_module+0xc27/0x1d00 pages=42 vmalloc N3=42
0xffffffffa0081000-0xffffffffa00ae000  184320 sys_init_module+0xc27/0x1d00 pages=44 vmalloc N3=44
0xffffffffa00ae000-0xffffffffa00b1000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2
0xffffffffa00b1000-0xffffffffa00b9000   32768 sys_init_module+0xc27/0x1d00 pages=7 vmalloc N0=7
0xffffffffa00b9000-0xffffffffa00c4000   45056 sys_init_module+0xc27/0x1d00 pages=10 vmalloc N3=10
0xffffffffa00c6000-0xffffffffa00e0000  106496 sys_init_module+0xc27/0x1d00 pages=25 vmalloc N2=25
0xffffffffa00e0000-0xffffffffa00f1000   69632 sys_init_module+0xc27/0x1d00 pages=16 vmalloc N2=16
0xffffffffa00f1000-0xffffffffa00f4000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2
0xffffffffa00f4000-0xffffffffa00f7000   12288 sys_init_module+0xc27/0x1d00 pages=2 vmalloc N3=2

[akpm@linux-foundation.org: fix comment]
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoSYNC_FILE_RANGE_WRITE may and will block. Document that.
Pavel Machek [Thu, 24 Jul 2008 04:27:36 +0000]
SYNC_FILE_RANGE_WRITE may and will block. Document that.

[akpm@linux-foundation.org: fix comment text]
Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotmpfs: support aio
Hugh Dickins [Thu, 24 Jul 2008 04:27:35 +0000]
tmpfs: support aio

We have a request for tmpfs to support the AIO interface: easily done, no
more than replacing the old shmem_file_read by shmem_file_aio_read,
cribbed from generic_file_aio_read.  (In 2.6.25 its write side was already
changed to use generic_file_aio_write.)

Incorporate cleanups from Andrew Morton and Harvey Harrison.

Tests out fine with LTP's ltp-aiodio.sh, given hacks (not included) to
support O_DIRECT.  tmpfs cannot honestly support O_DIRECT: its
cache-avoiding-IO nature is at odds with direct IO-avoiding-cache.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Lawrence Greenfield <leg@google.com>
Cc: Christoph Rohland <hans-christoph.rohland@sap.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agogeneric_file_aio_read() cleanups
Hugh Dickins [Thu, 24 Jul 2008 04:27:34 +0000]
generic_file_aio_read() cleanups

As akpm points out, there's really no need for generic_file_aio_read to
make a special case of count 0: just loop through nr_segs doing nothing.
And as Harvey Harrison points out, there's no need to reset retval to 0
where it's already 0.

Setting count (or ocount) to 0 before calling generic_segment_checks is
unnecessary too; but reluctantly I'll leave that removal to someone with a
wider range of gcc versions to hand - 4.1.2 and 4.2.1 don't warn about it,
but perhaps others do - I forget which are the warniest versions.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Lawrence Greenfield <leg@google.com>
Cc: Christoph Rohland <hans-christoph.rohland@sap.com>
Cc: Badari Pulavarty <pbadari@us.ibm.com>
Cc: Zach Brown <zach.brown@oracle.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agovma_page_offset() has no callees: drop it
Johannes Weiner [Thu, 24 Jul 2008 04:27:33 +0000]
vma_page_offset() has no callees: drop it

Hugh adds: vma_pagecache_offset() has a dangerously misleading name, since
it's using hugepage units: rename it to vma_hugecache_offset().

[apw@shadowen.org: restack onto fixed MAP_PRIVATE reservations]
[akpm@linux-foundation.org: vma_split conversion]
Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb reservations: fix hugetlb MAP_PRIVATE reservations across vma splits
Andy Whitcroft [Thu, 24 Jul 2008 04:27:32 +0000]
hugetlb reservations: fix hugetlb MAP_PRIVATE reservations across vma splits

When a hugetlb mapping with a reservation is split, a new VMA is cloned
from the original.  This new VMA is a direct copy of the original
including the reservation count.  When this pair of VMAs are unmapped we
will incorrect double account the unused reservation and the overall
reservation count will be incorrect, in extreme cases it will wrap.

The problem occurs when we split an existing VMA say to unmap a page in
the middle.  split_vma() will create a new VMA copying all fields from the
original.  As we are storing our reservation count in vm_private_data this
is also copies, endowing the new VMA with a duplicate of the original
VMA's reservation.  Neither of the new VMAs can exhaust these reservations
as they are too small, but when we unmap and close these VMAs we will
incorrect credit the remainder twice and resv_huge_pages will become out
of sync.  This can lead to allocation failures on mappings with
reservations and even to resv_huge_pages wrapping which prevents all
subsequent hugepage allocations.

The simple fix would be to correctly apportion the remaining reservation
count when the split is made.  However the only hook we have vm_ops->open
only has the new VMA we do not know the identity of the preceeding VMA.
Also even if we did have that VMA to hand we do not know how much of the
reservation was consumed each side of the split.

This patch therefore takes a different tack.  We know that the whole of
any private mapping (which has a reservation) has a reservation over its
whole size.  Any present pages represent consumed reservation.  Therefore
if we track the instantiated pages we can calculate the remaining
reservation.

This patch reuses the existing regions code to track the regions for which
we have consumed reservation (ie.  the instantiated pages), as each page
is faulted in we record the consumption of reservation for the new page.
When we need to return unused reservations at unmap time we simply count
the consumed reservation region subtracting that from the whole of the
map.  During a VMA split the newly opened VMA will point to the same
region map, as this map is offset oriented it remains valid for both of
the split VMAs.  This map is referenced counted so that it is removed when
all VMAs which are part of the mmap are gone.

Thanks to Adam Litke and Mel Gorman for their review feedback.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Cc: Jon Tollefson <kniht@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: allow huge page mappings to be created without reservations
Andy Whitcroft [Thu, 24 Jul 2008 04:27:30 +0000]
hugetlb: allow huge page mappings to be created without reservations

By default all shared mappings and most private mappings now have
reservations associated with them.  This improves semantics by providing
allocation guarentees to the mapper.  However a small number of
applications may attempt to make very large sparse mappings, with these
strict reservations the system will never be able to honour the mapping.

This patch set brings MAP_NORESERVE support to hugetlb files.  This allows
new mappings to be made to hugetlbfs files without an associated
reservation, for both shared and private mappings.  This allows
applications which want to create very sparse mappings to opt-out of the
reservation system.  Obviously as there is no reservation they are liable
to fault at runtime if the huge page pool becomes exhausted; buyer beware.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: move reservation region support earlier
Andy Whitcroft [Thu, 24 Jul 2008 04:27:29 +0000]
hugetlb: move reservation region support earlier

The following patch will require use of the reservation regions support.
Move this earlier in the file.  No changes have been made to this code.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: record MAP_NORESERVE status on vmas and fix small page mprotect reservations
Andy Whitcroft [Thu, 24 Jul 2008 04:27:28 +0000]
mm: record MAP_NORESERVE status on vmas and fix small page mprotect reservations

With Mel's hugetlb private reservation support patches applied, strict
overcommit semantics are applied to both shared and private huge page
mappings.  This can be a problem if an application relied on unlimited
overcommit semantics for private mappings.  An example of this would be an
application which maps a huge area with the intention of using it very
sparsely.  These application would benefit from being able to opt-out of
the strict overcommit.  It should be noted that prior to hugetlb
supporting demand faulting all mappings were fully populated and so
applications of this type should be rare.

This patch stack implements the MAP_NORESERVE mmap() flag for huge page
mappings.  This flag has the same meaning as for small page mappings,
suppressing reservations for that mapping.

Thanks to Mel Gorman for reviewing a number of early versions of these
patches.

This patch:

When a small page mapping is created with mmap() reservations are created
by default for any memory pages required.  When the region is read/write
the reservation is increased for every page, no reservation is needed for
read-only regions (as they implicitly share the zero page).  Reservations
are tracked via the VM_ACCOUNT vma flag which is present when the region
has reservation backing it.  When we convert a region from read-only to
read-write new reservations are aquired and VM_ACCOUNT is set.  However,
when a read-only map is created with MAP_NORESERVE it is indistinguishable
from a normal mapping.  When we then convert that to read/write we are
forced to incorrectly create reservations for it as we have no record of
the original MAP_NORESERVE.

This patch introduces a new vma flag VM_NORESERVE which records the
presence of the original MAP_NORESERVE flag.  This allows us to
distinguish these two circumstances and correctly account the reserve.

As well as fixing this FIXME in the code, this makes it much easier to
introduce MAP_NORESERVE support for huge pages as this flag is available
consistantly for the life of the mapping.  VM_ACCOUNT on the other hand is
heavily used at the generic level in association with small pages.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohuge page private reservation review cleanups
Andy Whitcroft [Thu, 24 Jul 2008 04:27:26 +0000]
huge page private reservation review cleanups

Create some new accessors for vma private data to cut down on and contain
the casts.  Encapsulates the huge and small page offset calculations.
Also adds a couple of VM_BUG_ONs for consistency.

[akpm@linux-foundation.org: Make things static]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Adam Litke <agl@us.ibm.com>
Cc: Johannes Weiner <hannes@saeurebad.de>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Michael Kerrisk <mtk.manpages@googlemail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on...
Mel Gorman [Thu, 24 Jul 2008 04:27:25 +0000]
hugetlb: guarantee that COW faults for a process that called mmap(MAP_PRIVATE) on hugetlbfs will succeed

After patch 2 in this series, a process that successfully calls mmap() for
a MAP_PRIVATE mapping will be guaranteed to successfully fault until a
process calls fork().  At that point, the next write fault from the parent
could fail due to COW if the child still has a reference.

We only reserve pages for the parent but a copy must be made to avoid
leaking data from the parent to the child after fork().  Reserves could be
taken for both parent and child at fork time to guarantee faults but if
the mapping is large it is highly likely we will not have sufficient pages
for the reservation, and it is common to fork only to exec() immediatly
after.  A failure here would be very undesirable.

Note that the current behaviour of mainline with MAP_PRIVATE pages is
pretty bad.  The following situation is allowed to occur today.

1. Process calls mmap(MAP_PRIVATE)
2. Process calls mlock() to fault all pages and makes sure it succeeds
3. Process forks()
4. Process writes to MAP_PRIVATE mapping while child still exists
5. If the COW fails at this point, the process gets SIGKILLed even though it
   had taken care to ensure the pages existed

This patch improves the situation by guaranteeing the reliability of the
process that successfully calls mmap().  When the parent performs COW, it
will try to satisfy the allocation without using reserves.  If that fails
the parent will steal the page leaving any children without a page.
Faults from the child after that point will result in failure.  If the
child COW happens first, an attempt will be made to allocate the page
without reserves and the child will get SIGKILLed on failure.

To summarise the new behaviour:

1. If the original mapper performs COW on a private mapping with multiple
   references, it will attempt to allocate a hugepage from the pool or
   the buddy allocator without using the existing reserves. On fail, VMAs
   mapping the same area are traversed and the page being COW'd is unmapped
   where found. It will then steal the original page as the last mapper in
   the normal way.

2. The VMAs the pages were unmapped from are flagged to note that pages
   with data no longer exist. Future no-page faults on those VMAs will
   terminate the process as otherwise it would appear that data was corrupted.
   A warning is printed to the console that this situation occured.

2. If the child performs COW first, it will attempt to satisfy the COW
   from the pool if there are enough pages or via the buddy allocator if
   overcommit is allowed and the buddy allocator can satisfy the request. If
   it fails, the child will be killed.

If the pool is large enough, existing applications will not notice that
the reserves were a factor.  Existing applications depending on the
no-reserves been set are unlikely to exist as for much of the history of
hugetlbfs, pages were prefaulted at mmap(), allocating the pages at that
point or failing the mmap().

[npiggin@suse.de: fix CONFIG_HUGETLB=n build]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: reserve huge pages for reliable MAP_PRIVATE hugetlbfs mappings until fork()
Mel Gorman [Thu, 24 Jul 2008 04:27:23 +0000]
hugetlb: reserve huge pages for reliable MAP_PRIVATE hugetlbfs mappings until fork()

This patch reserves huge pages at mmap() time for MAP_PRIVATE mappings in
a similar manner to the reservations taken for MAP_SHARED mappings.  The
reserve count is accounted both globally and on a per-VMA basis for
private mappings.  This guarantees that a process that successfully calls
mmap() will successfully fault all pages in the future unless fork() is
called.

The characteristics of private mappings of hugetlbfs files behaviour after
this patch are;

1. The process calling mmap() is guaranteed to succeed all future faults until
   it forks().
2. On fork(), the parent may die due to SIGKILL on writes to the private
   mapping if enough pages are not available for the COW. For reasonably
   reliable behaviour in the face of a small huge page pool, children of
   hugepage-aware processes should not reference the mappings; such as
   might occur when fork()ing to exec().
3. On fork(), the child VMAs inherit no reserves. Reads on pages already
   faulted by the parent will succeed. Successful writes will depend on enough
   huge pages being free in the pool.
4. Quotas of the hugetlbfs mount are checked at reserve time for the mapper
   and at fault time otherwise.

Before this patch, all reads or writes in the child potentially needs page
allocations that can later lead to the death of the parent.  This applies
to reads and writes of uninstantiated pages as well as COW.  After the
patch it is only a write to an instantiated page that causes problems.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohugetlb: move hugetlb_acct_memory()
Mel Gorman [Thu, 24 Jul 2008 04:27:22 +0000]
hugetlb: move hugetlb_acct_memory()

This is a patchset to give reliable behaviour to a process that
successfully calls mmap(MAP_PRIVATE) on a hugetlbfs file.  Currently, it
is possible for the process to be killed due to a small hugepage pool size
even if it calls mlock().

MAP_SHARED mappings on hugetlbfs reserve huge pages at mmap() time.  This
guarantees all future faults against the mapping will succeed.  This
allows local allocations at first use improving NUMA locality whilst
retaining reliability.

MAP_PRIVATE mappings do not reserve pages.  This can result in an
application being SIGKILLed later if a huge page is not available at fault
time.  This makes huge pages usage very ill-advised in some cases as the
unexpected application failure cannot be detected and handled as it is
immediately fatal.  Although an application may force instantiation of the
pages using mlock(), this may lead to poor memory placement and the
process may still be killed when performing COW.

This patchset introduces a reliability guarantee for the process which
creates a private mapping, i.e.  the process that calls mmap() on a
hugetlbfs file successfully.  The first patch of the set is purely
mechanical code move to make later diffs easier to read.  The second patch
will guarantee faults up until the process calls fork().  After patch two,
as long as the child keeps the mappings, the parent is no longer
guaranteed to be reliable.  Patch 3 guarantees that the parent will always
successfully COW by unmapping the pages from the child in the event there
are insufficient pages in the hugepage pool in allocate a new page, be it
via a static or dynamic pool.

Existing hugepage-aware applications are unlikely to be affected by this
change.  For much of hugetlbfs's history, pages were pre-faulted at mmap()
time or mmap() failed which acts in a reserve-like manner.  If the pool is
sized correctly already so that parent and child can fault reliably, the
application will not even notice the reserves.  It's only when the pool is
too small for the application to function perfectly reliably that the
reserves come into play.

Credit goes to Andy Whitcroft for cleaning up a number of mistakes during
review before the patches were released.

This patch:

A later patch in this set needs to call hugetlb_acct_memory() before it is
defined.  This patch moves the function without modification.  This makes
later diffs easier to read.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Acked-by: Adam Litke <agl@us.ibm.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: drop unneeded pgdat argument from free_area_init_node()
Johannes Weiner [Thu, 24 Jul 2008 04:27:20 +0000]
mm: drop unneeded pgdat argument from free_area_init_node()

free_area_init_node() gets passed in the node id as well as the node
descriptor.  This is redundant as the function can trivially get the node
descriptor itself by means of NODE_DATA() and the node's id.

I checked all the users and NODE_DATA() seems to be usable everywhere
from where this function is called.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomapping_set_error: add unlikely()
Andrew Morton [Thu, 24 Jul 2008 04:27:19 +0000]
mapping_set_error: add unlikely()

This is called on a per-page basis and in the vast majority of cases
`error' is zero.

Cc: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoslob: record page flag overlays explicitly
Andy Whitcroft [Thu, 24 Jul 2008 04:27:19 +0000]
slob: record page flag overlays explicitly

SLOB reuses two page bits for internal purposes, it overlays PG_active and
PG_private.  This is hidden away in slob.c.  Document these overlays
explicitly in the main page-flags enum along with all the others.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoslub: record page flag overlays explicitly
Andy Whitcroft [Thu, 24 Jul 2008 04:27:18 +0000]
slub: record page flag overlays explicitly

SLUB reuses two page bits for internal purposes, it overlays PG_active and
PG_error.  This is hidden away in slub.c.  Document these overlays
explicitly in the main page-flags enum along with all the others.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agopage-flags: record page flag overlays explicitly
Andy Whitcroft [Thu, 24 Jul 2008 04:27:16 +0000]
page-flags: record page flag overlays explicitly

With the recent page flag reorganisation we have a single enum which
defines the valid page flags and their values, nice and clear.  However
there are a number of bits which are overloaded by different subsystems.
Firstly there is PG_owner_priv_1 which is used by filesystems and by XEN.
Secondly both SLOB and SLUB use a couple of extra page bits to manage
internal state for pages they own; both overlay other bits.  All of these
"aliases" are scattered about the source making it very hard for a reader
to know if the bits are safe to rely on in all contexts; confusion here is
bad.

As we now have a single place where the bits are clearly assigned it makes
sense to clarify the reuse of bits by making the aliases explicit and
visible with the original bit assignments.  This patch creates explicit
aliases within the enum itself for the overloaded bits, creates standard
bit accessors PageFoo etc.  and uses those throughout.

This version pulls the bit manipulation out to standard named page bit
accessors as suggested by Christoph, it retains the explicit mapping to
the overlayed bits.  A fusion of both ideas.  This has been SLUB and SLOB
have been compile tested on x86_64 only, and SLUB boot tested.  If people
feel this is worth doing then I can run a fuller set of testing.

This patch:

Some page flags are used for more than one purpose, for example
PG_owner_priv_1.  Currently there are individual accessors for each user,
each built using the common flag name far away from the bit definitions.
This makes it hard to see all possible uses of these bits.

Now that we have a single enum to generate the bit orders it makes sense
to express overlays in the same place.  So create per use aliases for this
bit in the main page-flags enum and use those in the accessors.

[akpm@linux-foundation.org: fix xen]
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofix soft lock up at NFS mount via per-SB LRU-list of unused dentries
Kentaro Makita [Thu, 24 Jul 2008 04:27:13 +0000]
fix soft lock up at NFS mount via per-SB LRU-list of unused dentries

[Summary]

 Split LRU-list of unused dentries to one per superblock to avoid soft
 lock up during NFS mounts and remounting of any filesystem.

 Previously I posted here:
 http://lkml.org/lkml/2008/3/5/590

[Descriptions]

- background

  dentry_unused is a list of dentries which are not referenced.
  dentry_unused grows up when references on directories or files are
  released.  This list can be very long if there is huge free memory.

- the problem

  When shrink_dcache_sb() is called, it scans all dentry_unused linearly
  under spin_lock(), and if dentry->d_sb is differnt from given
  superblock, scan next dentry.  This scan costs very much if there are
  many entries, and very ineffective if there are many superblocks.

  IOW, When we need to shrink unused dentries on one dentry, but scans
  unused dentries on all superblocks in the system.  For example, we scan
  500 dentries to unmount a filesystem, but scans 1,000,000 or more unused
  dentries on other superblocks.

  In our case , At mounting NFS*, shrink_dcache_sb() is called to shrink
  unused dentries on NFS, but scans 100,000,000 unused dentries on
  superblocks in the system such as local ext3 filesystems.  I hear NFS
  mounting took 1 min on some system in use.

* : NFS uses virtual filesystem in rpc layer, so NFS is affected by
  this problem.

  100,000,000 is possible number on large systems.

  Per-superblock LRU of unused dentried can reduce the cost in
  reasonable manner.

- How to fix

  I found this problem is solved by David Chinner's "Per-superblock
  unused dentry LRU lists V3"(1), so I rebase it and add some fix to
  reclaim with fairness, which is in Andrew Morton's comments(2).

  1) http://lkml.org/lkml/2006/5/25/318
  2) http://lkml.org/lkml/2006/5/25/320

  Split LRU-list of unused dentries to each superblocks.  Then, NFS
  mounting will check dentries under a superblock instead of all.  But
  this spliting will break LRU of dentry-unused.  So, I've attempted to
  make reclaim unused dentrins with fairness by calculate number of
  dentries to scan on this sb based on following way

  number of dentries to scan on this sb =
  count * (number of dentries on this sb / number of dentries in the machine)

- ToDo
 - I have to measuring performance number and do stress tests.

 - When unmount occurs during prune_dcache(), scanning on same
  superblock, It is unable to reach next superblock because it is gone
  away.  We restart scannig superblock from first one, it causes
  unfairness of reclaim unused dentries on first superblock.  But I think
  this happens very rarely.

- Test Results

  Result on 6GB boxes with excessive unused dentries.

Without patch:

$ cat /proc/sys/fs/dentry-state
10181835        10180203        45      0       0       0
# mount -t nfs 10.124.60.70:/work/kernel-src nfs
real    0m1.830s
user    0m0.001s
sys     0m1.653s

 With this patch:
$ cat /proc/sys/fs/dentry-state
10236610        10234751        45      0       0       0
# mount -t nfs 10.124.60.70:/work/kernel-src nfs
real    0m0.106s
user    0m0.002s
sys     0m0.032s

[akpm@linux-foundation.org: fix comments]
Signed-off-by: Kentaro Makita <k-makita@np.css.fujitsu.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: David Chinner <dgc@sgi.com>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agobuddy: clarify comments describing buddy merge
Andy Whitcroft [Thu, 24 Jul 2008 04:27:11 +0000]
buddy: clarify comments describing buddy merge

In __free_one_page(), the comment "Move the buddy up one level" appears
attached to the break and by implication when the break is taken we are
moving it up one level:

if (!page_is_buddy(page, buddy, order))
break;          /* Move the buddy up one level. */

In reality the inverse is true, we break out when we can no longer merge
this page with its buddy.  Looking back into pre-history (into the full
git history) it appears that these two lines accidentally got joined as
part of another change.

Move the comment down where it belongs below the if and clarify its
language.

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: remove double indirection on tlb parameter to free_pgd_range() & Co
Jan Beulich [Thu, 24 Jul 2008 04:27:10 +0000]
mm: remove double indirection on tlb parameter to free_pgd_range() & Co

The double indirection here is not needed anywhere and hence (at least)
confusing.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Acked-by: Jeremy Fitzhardinge <jeremy@goop.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospufs: use new vm_ops->access to allow local state access from gdb
Benjamin Herrenschmidt [Thu, 24 Jul 2008 04:27:09 +0000]
spufs: use new vm_ops->access to allow local state access from gdb

This uses the new vm_ops->access to allow gdb to access the SPU local
store.  We currently prevent access to problem state registers, this can
be done later if really needed but it's safer not to.

[akpm@linux-foundation.org: fix typo]
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agopowerpc ioremap_prot
Benjamin Herrenschmidt [Thu, 24 Jul 2008 04:27:08 +0000]
powerpc ioremap_prot

This adds ioremap_prot and pte_pgprot() so that one can extract protection
bits from a PTE and use them to ioremap_prot() (in order to support ptrace
of VM_IO | VM_PFNMAP as per Rik's patch).

This moves a couple of flag checks around in the ioremap implementations
of arch/powerpc.  There's a side effect of allowing non-cacheable and
non-guarded mappings on ppc32 which before would always have _PAGE_GUARDED
set whenever _PAGE_NO_CACHE is.

(standard ioremap will still set _PAGE_GUARDED, but ioremap_prot will be
capable of setting such a non guarded mapping).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agouse generic_access_phys for /dev/mem mappings
Rik van Riel [Thu, 24 Jul 2008 04:27:07 +0000]
use generic_access_phys for /dev/mem mappings

Use generic_access_phys as the access_process_vm access function for
/dev/mem mappings.  This makes it possible to debug the X server.

[akpm@linux-foundation.org: repair all the architectures which broke]
Signed-off-by: Rik van Riel <riel@redhat.com>
Cc: Benjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoaccess_process_vm device memory infrastructure
Rik van Riel [Thu, 24 Jul 2008 04:27:05 +0000]
access_process_vm device memory infrastructure

In order to be able to debug things like the X server and programs using
the PPC Cell SPUs, the debugger needs to be able to access device memory
through ptrace and /proc/pid/mem.

This patch:

Add the generic_access_phys access function and put the hooks in place
to allow access_process_vm to access device or PPC Cell SPU memory.

[riel@redhat.com: Add documentation for the vm_ops->access function]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Benjamin Herrensmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: remove nopfn
Nick Piggin [Thu, 24 Jul 2008 04:27:05 +0000]
mm: remove nopfn

There are no users of nopfn in the tree. Remove it.

[hugh@veritas.com: fix build error]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agokill generic_file_direct_IO()
Christoph Hellwig [Thu, 24 Jul 2008 04:27:04 +0000]
kill generic_file_direct_IO()

generic_file_direct_IO is a common helper around the invocation of
->direct_IO.  But there's almost nothing shared between the read and write
side, so we're better off without this helper.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm/hugetlb.c: fix duplicate variable
Adrian Bunk [Thu, 24 Jul 2008 04:27:03 +0000]
mm/hugetlb.c: fix duplicate variable

It's confusing that set_max_huge_pages() contained two different
variables named "ret", and although the code works correctly this should
be fixed.

The inner of the two variables can simply be removed.

Spotted by sparse.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: "KOSAKI Motohiro" <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm/vmstat.c: proper externs
Adrian Bunk [Thu, 24 Jul 2008 04:27:03 +0000]
mm/vmstat.c: proper externs

This patch adds proper extern declarations for five variables in
include/linux/vmstat.h

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm/migrate.c should #include <linux/syscalls.h>
Adrian Bunk [Thu, 24 Jul 2008 04:27:02 +0000]
mm/migrate.c should #include <linux/syscalls.h>

Every file should include the headers containing the externs for its
global functions (in this case for sys_move_pages()).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agopage allocator: inline some __alloc_pages() wrappers
KOSAKI Motohiro [Thu, 24 Jul 2008 04:27:01 +0000]
page allocator: inline some __alloc_pages() wrappers

Two zonelist patch series rewrote __page_alloc() largely.  Now, it is just
a wrapper function.  Inlining them will save a function call.

[akpm@linux-foundation.org: export __alloc_pages_internal]
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomspec: convert nopfn to fault
Nick Piggin [Thu, 24 Jul 2008 04:27:00 +0000]
mspec: convert nopfn to fault

[akpm@linux-foundation.org: remove unused variable]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: unexport __alloc_bootmem_core()
Johannes Weiner [Thu, 24 Jul 2008 04:26:59 +0000]
mm: unexport __alloc_bootmem_core()

This function has no external callers, so unexport it.  Also fix its naming
inconsistency.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: normalize internal argument passing of bootmem data
Johannes Weiner [Thu, 24 Jul 2008 04:26:59 +0000]
mm: normalize internal argument passing of bootmem data

All _core functions only need the bootmem data, not the whole node descriptor.
Adjust the two functions that take the node descriptor unneededly.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: fix free_all_bootmem_core alignment check
Johannes Weiner [Thu, 24 Jul 2008 04:26:58 +0000]
mm: fix free_all_bootmem_core alignment check

The check for node_boot_start is bogus because we start freeing at the
corresponding pfn.  So check if the pfn is properly aligned instead in a more
readable way and adjust the documentation.

Also remove an unneeded accounting variable.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: move bootmem descriptors definition to a single place
Johannes Weiner [Thu, 24 Jul 2008 04:26:55 +0000]
mm: move bootmem descriptors definition to a single place

There are a lot of places that define either a single bootmem descriptor or an
array of them.  Use only one central array with MAX_NUMNODES items instead.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Kyle McMartin <kyle@parisc-linux.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoadd a helper function to test if an object is on the stack
FUJITA Tomonori [Thu, 24 Jul 2008 04:26:53 +0000]
add a helper function to test if an object is on the stack

lib/debugobjects.c has a function to test if an object is on the stack.
The block layer and ide needs it (they need to avoid DMA from/to stack
buffers).  This patch moves the function to include/linux/sched.h so that
everyone can use it.

lib/debugobjects.c uses current->stack but this patch uses a
task_stack_page() accessor, which is a preferable way to access the stack.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: print out the zonelists on request for manual verification
Mel Gorman [Thu, 24 Jul 2008 04:26:52 +0000]
mm: print out the zonelists on request for manual verification

This patch prints out the zonelists during boot for manual verification by the
user if the mminit_loglevel is MMINIT_VERIFY or higher.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: make defensive checks around PFN values registered for memory usage
Mel Gorman [Thu, 24 Jul 2008 04:26:52 +0000]
mm: make defensive checks around PFN values registered for memory usage

There are a number of different views to how much memory is currently active.
There is the arch-independent zone-sizing view, the bootmem allocator and
memory models view.

Architectures register this information at different times and is not
necessarily in sync particularly with respect to some SPARSEMEM limitations.

This patch introduces mminit_validate_memmodel_limits() which is able to
validate and correct PFN ranges with respect to the memory model.  It is only
SPARSEMEM that currently validates itself.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: verify the page links and memory model
Mel Gorman [Thu, 24 Jul 2008 04:26:51 +0000]
mm: verify the page links and memory model

Print out information on how the page flags are being used if mminit_loglevel
is MMINIT_VERIFY or higher and unconditionally performs sanity checks on the
flags regardless of loglevel.

When the page flags are updated with section, node and zone information, a
check are made to ensure the values can be retrieved correctly.  Finally we
confirm that pfn_to_page and page_to_pfn are the correct inverse functions.

[akpm@linux-foundation.org: fix printk warnings]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm: add a basic debugging framework for memory initialisation
Mel Gorman [Thu, 24 Jul 2008 04:26:49 +0000]
mm: add a basic debugging framework for memory initialisation

Boot initialisation is very complex, with significant numbers of
architecture-specific routines, hooks and code ordering.  While significant
amounts of the initialisation is architecture-independent, it trusts the data
received from the architecture layer.  This is a mistake, and has resulted in
a number of difficult-to-diagnose bugs.

This patchset adds some validation and tracing to memory initialisation.  It
also introduces a few basic defensive measures.  The validation code can be
explicitly disabled for embedded systems.

This patch:

Add additional debugging and verification code for memory initialisation.

Once enabled, the verification checks are always run and when required
additional debugging information may be outputted via a mminit_loglevel=
command-line parameter.

The verification code is placed in a new file mm/mm_init.c.  Ideally other mm
initialisation code will be moved here over time.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoadd HAVE_CLK to Kconfig, for driver dependencies
David Brownell [Thu, 24 Jul 2008 04:26:48 +0000]
add HAVE_CLK to Kconfig, for driver dependencies

Flag platforms as HAVE_CLK (or not) in Kconfig, based on whether they
support <linux/clk.h> calls, so that otherwise portable drivers which need
those calls can list that dependency.

Something like this is a prerequisite for merging the musb_hdrc driver,
currently used on platforms including Davinci, OMAP2430, OMAP3xx ...  and
the discrete TUSB6010 chip, which doesn't have a natural platform
dependency.  (Used with OMAP 2420 in current Nokia N8x0 tablets.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Russell King <rmk@arm.linux.org.uk>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoremove is_tty()
Adrian Bunk [Thu, 24 Jul 2008 04:26:47 +0000]
remove is_tty()

This patch removes the no longer used is_tty().

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohpet: clarify maintainer entry
Clemens Ladisch [Thu, 24 Jul 2008 04:26:46 +0000]
hpet: clarify maintainer entry

The existing HPET maintainer entries are somewhat unclear about which one
applies to what part of the kernel.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomove memory_read_from_buffer() from fs.h to string.h
Akinobu Mita [Thu, 24 Jul 2008 04:26:44 +0000]
move memory_read_from_buffer() from fs.h to string.h

James Bottomley warns that inclusion of linux/fs.h in a low level
driver was always a danger signal.  This patch moves
memory_read_from_buffer() from fs.h to string.h and fixes includes in
existing memory_read_from_buffer() users.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: James Bottomley <James.Bottomley@hansenpartnership.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Bob Moore <robert.moore@intel.com>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'x86/auditsc' of git://git.kernel.org/pub/scm/linux/kernel/git/frob...
Linus Torvalds [Thu, 24 Jul 2008 03:39:21 +0000]
Merge branch 'x86/auditsc' of git://git./linux/kernel/git/frob/linux-2.6-roland

* 'x86/auditsc' of git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-roland:
  i386 syscall audit fast-path
  x86_64 ia32 syscall audit fast-path
  x86_64 syscall audit fast-path
  x86_64: remove bogus optimization in sysret_signal

11 years agoMerge branch 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
Linus Torvalds [Thu, 24 Jul 2008 02:36:53 +0000]
Merge branch 'sched/for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched/for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: hrtick_enabled() should use cpu_active()
  sched, x86: clean up hrtick implementation
  sched: fix build error, provide partition_sched_domains() unconditionally
  sched: fix warning in inc_rt_tasks() to not declare variable 'rq' if it's not needed
  cpu hotplug: Make cpu_active_map synchronization dependency clear
  cpu hotplug, sched: Introduce cpu_active_map and redo sched domain managment (take 2)
  sched: rework of "prioritize non-migratable tasks over migratable ones"
  sched: reduce stack size in isolated_cpu_setup()
  Revert parts of "ftrace: do not trace scheduler functions"

Fixed up conflicts in include/asm-x86/thread_info.h (due to the
TIF_SINGLESTEP unification vs TIF_HRTICK_RESCHED removal) and
kernel/sched_fair.c (due to cpu_active_map vs for_each_cpu_mask_nr()
introduction).

11 years agoMerge branch 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 24 Jul 2008 01:37:44 +0000]
Merge branch 'cpus4096-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'cpus4096-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (31 commits)
  NR_CPUS: Replace NR_CPUS in speedstep-centrino.c
  cpumask: Provide a generic set of CPUMASK_ALLOC macros, FIXUP
  NR_CPUS: Replace NR_CPUS in cpufreq userspace routines
  NR_CPUS: Replace per_cpu(..., smp_processor_id()) with __get_cpu_var
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genapic_flat_64.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/genx2apic_uv_x.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/proc.c
  NR_CPUS: Replace NR_CPUS in arch/x86/kernel/cpu/mcheck/mce_64.c
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c, fix
  cpumask: Use optimized CPUMASK_ALLOC macros in the centrino_target
  cpumask: Provide a generic set of CPUMASK_ALLOC macros
  cpumask: Optimize cpumask_of_cpu in lib/smp_processor_id.c
  cpumask: Optimize cpumask_of_cpu in kernel/time/tick-common.c
  cpumask: Optimize cpumask_of_cpu in drivers/misc/sgi-xp/xpc_main.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/ldt.c
  cpumask: Optimize cpumask_of_cpu in arch/x86/kernel/io_apic_64.c
  cpumask: Replace cpumask_of_cpu with cpumask_of_cpu_ptr
  Revert "cpumask: introduce new APIs"
  cpumask: make for_each_cpu_mask a bit smaller
  net: Pass reference to cpumask variable in net/sunrpc/svc.c
  ...

Fix up trivial conflicts in drivers/cpufreq/cpufreq.c manually

11 years agoMerge branch 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 24 Jul 2008 01:34:13 +0000]
Merge branch 'core/softlockup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core/softlockup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  softlockup: fix invalid proc_handler for softlockup_panic
  softlockup: fix watchdog task wakeup frequency
  softlockup: fix watchdog task wakeup frequency
  softlockup: show irqtrace
  softlockup: print a module list on being stuck
  softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression
  softlockup: fix false positives on nohz if CPU is 100% idle for more than 60 seconds
  softlockup: fix softlockup_thresh fix
  softlockup: fix softlockup_thresh unaligned access and disable detection at runtime
  softlockup: allow panic on lockup

11 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 24 Jul 2008 01:24:08 +0000]
Merge branch 'devel' of /home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (85 commits)
  [ARM] pxa: add base support for PXA930 Handheld Platform (aka SAAR)
  [ARM] pxa: add base support for PXA930 Evaluation Board (aka TavorEVB)
  [ARM] pxa: add base support for PXA930 (aka Tavor-P)
  [ARM] Update mach-types
  [ARM] pxa: make littleton to use the new smc91x platform data
  [ARM] pxa: make zylonite to use the new smc91x platform data
  [ARM] pxa: make mainstone to use the new smc91x platform data
  [ARM] pxa: make lubbock to use new smc91x platform data
  [NET] smc91x: prepare SMC_USE_PXA_DMA to be specified in platform data
  [NET] smc91x: prepare for SMC_IO_SHIFT to be a platform configurable variable
  [NET] smc91x: add SMC91X_NOWAIT flag to platform data
  [NET] smc91x: favor the use of SMC91X_USE_* instead of SMC_CAN_USE_*
  [NET] smc91x: remove "irq_flags" from "struct smc91x_platdata"
  [ARM] 5146/1: pxa2xx: convert all boards to call pxa2xx_transceiver_mode helper
  Support for LCD on e740 e750 e400 and e800 e-series PDAs
  E-series UDC support
  PXA UDC - allow use of inverted GPIO for pullup
  Add e350 support
  Fix broken e-series build
  E-series GPIO / IRQ definitions.
  ...

11 years agoi386 syscall audit fast-path
Roland McGrath [Tue, 24 Jun 2008 11:16:52 +0000]
i386 syscall audit fast-path

This adds fast paths for 32-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
These paths does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>

11 years agox86_64 ia32 syscall audit fast-path
Roland McGrath [Tue, 24 Jun 2008 08:13:31 +0000]
x86_64 ia32 syscall audit fast-path

This adds fast paths for 32-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
These paths does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>

11 years agox86_64 syscall audit fast-path
Roland McGrath [Mon, 23 Jun 2008 22:37:04 +0000]
x86_64 syscall audit fast-path

This adds a fast path for 64-bit syscall entry and exit when
TIF_SYSCALL_AUDIT is set, but no other kind of syscall tracing.
This path does not need to save and restore all registers as
the general case of tracing does.  Avoiding the iret return path
when syscall audit is enabled helps performance a lot.

Signed-off-by: Roland McGrath <roland@redhat.com>

11 years agox86_64: remove bogus optimization in sysret_signal
Roland McGrath [Tue, 24 Jun 2008 03:41:12 +0000]
x86_64: remove bogus optimization in sysret_signal

This short-circuit path in sysret_signal looks wrong to me.
AFAICT, in practice the branch is never taken--and if it were,
it would go wrong.  To wit, try loading a module whose init
function does set_thread_flag(TIF_IRET), and see insmod crash
(presumably with a wrong user stack pointer).

This is because the FIXUP_TOP_OF_STACK work hasn't been done yet
when we jump around the call to ptregscall_common and get to
int_with_check--where it expects the user RSP,SS,CS and EFLAGS to
have been stored by FIXUP_TOP_OF_STACK.

I don't think it's normally possible to get to sysret_signal with no
_TIF_DO_NOTIFY_MASK bits set anyway, so these two instructions are
already superfluous.  If it ever did happen, it is harmless to call
do_notify_resume with nothing for it to do.

Signed-off-by: Roland McGrath <roland@redhat.com>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc
Linus Torvalds [Wed, 23 Jul 2008 19:04:34 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/drzeus/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc:
  sdhci: highmem capable PIO routines
  sg: reimplement sg mapping iterator
  mmc_test: print message when attaching to card
  mmc: Remove Russell as primecell mci maintainer
  mmc_block: bounce buffer highmem support
  sdhci: fix bad warning from commit c8b3e02
  sdhci: add warnings for bad buffers in ADMA path
  mmc_test: test oversized sg lists
  mmc_test: highmem tests
  s3cmci: ensure host stopped on machine shutdown
  au1xmmc: suspend/resume implementation
  s3cmci: fixes for section mismatch warnings
  pxamci: trivial fix of DMA alignment register bit clearing

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Wed, 23 Jul 2008 19:03:18 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/djbw/async_tx

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (24 commits)
  I/OAT: I/OAT version 3.0 support
  I/OAT: tcp_dma_copybreak default value dependent on I/OAT version
  I/OAT: Add watchdog/reset functionality to ioatdma
  iop_adma: cleanup iop_chan_xor_slot_count
  iop_adma: document how to calculate the minimum descriptor pool size
  iop_adma: directly reclaim descriptors on allocation failure
  async_tx: make async_tx_test_ack a boolean routine
  async_tx: remove depend_tx from async_tx_sync_epilog
  async_tx: export async_tx_quiesce
  async_tx: fix handling of the "out of descriptor" condition in async_xor
  async_tx: ensure the xor destination buffer remains dma-mapped
  async_tx: list_for_each_entry_rcu() cleanup
  dmaengine: Driver for the Synopsys DesignWare DMA controller
  dmaengine: Add slave DMA interface
  dmaengine: add DMA_COMPL_SKIP_{SRC,DEST}_UNMAP flags to control dma unmap
  dmaengine: Add dma_client parameter to device_alloc_chan_resources
  dmatest: Simple DMA memcpy test client
  dmaengine: DMA engine driver for Marvell XOR engine
  iop-adma: fix platform driver hotplug/coldplug
  dmaengine: track the number of clients using a channel
  ...

Fixed up conflict in drivers/dca/dca-sysfs.c manually

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Wed, 23 Jul 2008 18:59:37 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  kgdb: kgdboc console poll hooks for mpsc uart
  kgdb: kgdboc console poll hooks for cpm uart
  kgdb, powerpc: arch specific powerpc kgdb support
  kgdb: support for ARCH=arm
  kgdb: remove unused HAVE_ARCH_KGDB_SHADOW_INFO config variable

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Wed, 23 Jul 2008 18:59:09 +0000]
Merge git://git./linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (60 commits)
  ide: small whitespace fixes
  ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings
  ide: ide-cd.c fix sparse endianness warnings
  ide-cd: convert to using the new atapi_flags
  ide: remove unused PC_FLAG_DRQ_INTERRUPT
  ide-scsi: convert to using the new atapi_flags
  ide-tape: convert to using the new atapi_flags
  ide-floppy: convert to using the new atapi_flags (take 2)
  ide: add per-device flags
  ide: use rq->cmd instead of pc->c in atapi common code
  ide-scsi: pass packet command in rq->cmd
  ide-tape: pass packet command in rq->cmd
  ide-tape: make room for packet command ids in rq->cmd
  ide-floppy: pass packet command in rq->cmd
  ide: remove pc->callback member from ide_atapi_pc
  ide-scsi: use drive->pc_callback instead of pc->callback
  ide-tape: use drive->pc_callback instead of pc->callback
  ide-floppy: use drive->pc_callback instead of pc->callback
  ide: push pc callback pointer into the ide_drive_t structure
  drivers/ide/ide-tape.c: remove double kfree
  ...

11 years agoide: small whitespace fixes
Pavel Machek [Wed, 23 Jul 2008 17:56:02 +0000]
ide: small whitespace fixes

Small whitespace fixes for drivers/ide.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings
Harvey Harrison [Wed, 23 Jul 2008 17:56:02 +0000]
ide: ide-cd_ioctl.c fix sparse integer as NULL pointer warnings

The function ide_cd_queue_pc should be checked as the bufflen arg is
dereferenced and lots of callers are passing in NULL.

drivers/ide/ide-cd_ioctl.c:124:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:149:47: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:231:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd_ioctl.c:374:46: warning: Using plain integer as NULL pointer

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: ide-cd.c fix sparse endianness warnings
Harvey Harrison [Wed, 23 Jul 2008 17:56:02 +0000]
ide: ide-cd.c fix sparse endianness warnings

drivers/ide/ide-cd.c:1276:46: warning: Using plain integer as NULL pointer
drivers/ide/ide-cd.c:1298:19: warning: cast to restricted __be32
drivers/ide/ide-cd.c:1300:4: warning: cast to restricted __be32
drivers/ide/ide-cd.c:1522:14: warning: cast to restricted __le16
drivers/ide/ide-cd.c:1523:14: warning: cast to restricted __le16
drivers/ide/ide-cd.c:1525:14: warning: cast to restricted __be16
drivers/ide/ide-cd.c:1526:14: warning: cast to restricted __be16
drivers/ide/ide-cd.c:1667:37: warning: cast to restricted __be16

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-cd: convert to using the new atapi_flags
Borislav Petkov [Wed, 23 Jul 2008 17:56:02 +0000]
ide-cd: convert to using the new atapi_flags

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: remove unused PC_FLAG_DRQ_INTERRUPT
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000]
ide: remove unused PC_FLAG_DRQ_INTERRUPT

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-scsi: convert to using the new atapi_flags
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000]
ide-scsi: convert to using the new atapi_flags

Remove unused IDESCSI_PC_RQ while at it.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-tape: convert to using the new atapi_flags
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000]
ide-tape: convert to using the new atapi_flags

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-floppy: convert to using the new atapi_flags (take 2)
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000]
ide-floppy: convert to using the new atapi_flags (take 2)

while at it, remove PC_FLAG_ZIP_DRIVE from the packed command flags altogether
and query the drive type through drive->atapi_flags.

v2:
ide-floppy fix.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add per-device flags
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000]
ide: add per-device flags

Push device flags up into ide_drive_t.

There should be no functionality change resulting from this patch.

[bart: IDE_FLAG_* -> IDE_AFLAG_*, dev_flags -> atapi_flags]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: use rq->cmd instead of pc->c in atapi common code
Borislav Petkov [Wed, 23 Jul 2008 17:56:01 +0000]
ide: use rq->cmd instead of pc->c in atapi common code

There should be no functionality change resulting from this patch.

[bart: s/HWGROUP(drive)/hwif->hwgroup/]

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-scsi: pass packet command in rq->cmd
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000]
ide-scsi: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd.
Later, after all drivers have been converted, it'll be
switched to use that in the common code instead of pc->c.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-tape: pass packet command in rq->cmd
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000]
ide-tape: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd. Later, after
all drivers have been converted, it'll be switched to use that in the
common code instead of pc->c. While at it, simplify ide_tape_create_rw_cmd.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-tape: make room for packet command ids in rq->cmd
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000]
ide-tape: make room for packet command ids in rq->cmd

ide-tape uses rq->cmd for special commands from the chrdev interface so move
those to byte 13 (BLK_MAX_CDB = 16) since a packet cmd is max 12 bytes.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-floppy: pass packet command in rq->cmd
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000]
ide-floppy: pass packet command in rq->cmd

Make a redundant copy of the packet command bits into rq->cmd.
Later, after all drivers have been converted, it'll be
switched to use that in the common code instead of pc->c.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: remove pc->callback member from ide_atapi_pc
Borislav Petkov [Wed, 23 Jul 2008 17:56:00 +0000]
ide: remove pc->callback member from ide_atapi_pc

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-scsi: use drive->pc_callback instead of pc->callback
Borislav Petkov [Wed, 23 Jul 2008 17:55:59 +0000]
ide-scsi: use drive->pc_callback instead of pc->callback

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-tape: use drive->pc_callback instead of pc->callback
Borislav Petkov [Wed, 23 Jul 2008 17:55:59 +0000]
ide-tape: use drive->pc_callback instead of pc->callback

The if-else block in the IRQ handler is only temporary so that bisect searches
don't break and it'll be removed after converting the remainder of the drivers.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide-floppy: use drive->pc_callback instead of pc->callback
Borislav Petkov [Wed, 23 Jul 2008 17:55:59 +0000]
ide-floppy: use drive->pc_callback instead of pc->callback

It is important that drive->pc_callback is set prior to enabling IRQs on the
device since this is called from the IRQ handler. Otherwise it hurts as I learnt
the hard way from the several "Kernel panic - not synching: Fatal exception in
interrupt" during the weekend :).

The if-else block in the IRQ handler is only temporary so that bisect searches
don't break and it'll be removed after converting the remainder of the drivers.

There should be no functionality change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: push pc callback pointer into the ide_drive_t structure
Borislav Petkov [Wed, 23 Jul 2008 17:55:59 +0000]
ide: push pc callback pointer into the ide_drive_t structure

Refrain from carrying the callback ptr with every packet command since the
callback function is only one anyways. ide_drive_t is probably not the most
suitable place for it right now but is the more sane solution. Besides, these
structs are going to be reorganized anyways during the generic ide rewrite.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agodrivers/ide/ide-tape.c: remove double kfree
Darren Jenkins [Wed, 23 Jul 2008 17:55:59 +0000]
drivers/ide/ide-tape.c: remove double kfree

Coverity CID: 2336 USE_AFTER_FREE

drivers/ide/ide-tape.c ide_tape_kfree_buffer() double free's a pointer
(hint freed by an alias in first outer loop).

This patch simply removes the superfluous kfree().

Signed-off-by: Darren Jenkins <darrenrjenkins@gmailcom>
Acked-by: Borislav Petkov <petkovbb@gmail.com>
Cc: gadio@netvision.net.il
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add ide_host_free() helper (take 2)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:59 +0000]
ide: add ide_host_free() helper (take 2)

* Add ide_host_free() helper and convert ide_host_remove() to use it.

* Fix handling of ide_host_register() failure in ide_host_add(),
  icside.c, ide-generic.c, falconide.c and sgiioc4.c.

While at it:

* Fix handling of ide_host_alloc_all() failure in ide-generic.c.

* Fix handling of ide_host_alloc() failure in falconide.c
  (also return the correct error value if no device is found).

v2:
* falconide build fix. (From Stephen Rothwell)

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: allocate ide_hwif_t instances dynamically
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:58 +0000]
ide: allocate ide_hwif_t instances dynamically

* Allocate ide_hwif_t instances dynamically and remove ide_hwifs[].

  This cuts almost ~14kB from ide-probe.o (x86-32, MAX_HWIFS == 10):

   text    data     bss     dec     hex filename
   9140      40   14084   23264    5ae0 drivers/ide/ide-probe.o.before
   9169      40      44    9253    2425 drivers/ide/ide-probe.o.after

* Remove no longer needed ide_init_port_data() call from ide_unregister().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add ide_ports[]
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:58 +0000]
ide: add ide_ports[]

* Add ide_ports[] table keeping pointers to all initialized ports.

* Set ide_ports[] entry for a given port in init_irq() and clear it
  ide_remove_port_from_hwgroup().

* Convert init_irq() to use ide_ports[] instead of ide_hwifs[] for
  grouping ports into hwgroup.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: move ide_remove_port_from_hwgroup() to ide-probe.c
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:58 +0000]
ide: move ide_remove_port_from_hwgroup() to ide-probe.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: fix IDE port slots reservation and freeing (take 2)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:57 +0000]
ide: fix IDE port slots reservation and freeing (take 2)

* Make ide_find_port_slot() return port slot index.

* Add ide_free_port_slot() helper.

* Move ide_init_port_data() call and error printk() from
  ide_find_port_slot() to ide_host_alloc_all().

* Make ide_{find,free}_port_slot() take ide_cfg_mtx mutex
  and convert them use ide_indexes bitmap to keep track of
  reserved port slots.

* Don't set hwif->chipset in ide_host_alloc_all() as it is
  no longer necessary.

v2:
* Pass the correct slot index to ide_init_port_data().

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: fix ide_host_register() return value
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:57 +0000]
ide: fix ide_host_register() return value

Fix ide_host_register() to fail only if all ports cannot be registered.

While at it:

* Use host->ports[] instead of ide_hwifs[] and remove idx[].

There should be no functional changes caused by this patch.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add ide_host_add() helper
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:57 +0000]
ide: add ide_host_add() helper

Add ide_host_add() helper which does ide_host_alloc()+ide_host_register(),
then convert ide_setup_pci_device[s](), ide_legacy_device_add() and some
host drivers to use it.

While at it:

* Fix ide_setup_pci_device[s](), ide_arm.c, gayle.c, ide-4drives.c,
  macide.c, q40ide.c, cmd640.c and cs5520.c to return correct error value.

* -ENOENT -> -ENOMEM in rapide.c, ide-h8300.c, ide-generic.c, au1xxx-ide.c
  and pmac.c

* -ENODEV -> -ENOMEM in palm_bk3710.c, ide_platform.c and delkin_cb.c

* -1 -> -ENOMEM in ide-pnp.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

11 years agoide: add struct ide_host (take 3)
Bartlomiej Zolnierkiewicz [Wed, 23 Jul 2008 17:55:57 +0000]
ide: add struct ide_host (take 3)

* Add struct ide_host which keeps pointers to host's ports.

* Add ide_host_alloc[_all]() and ide_host_remove() helpers.

* Pass 'struct ide_host *host' instead of 'u8 *idx' to
  ide_device_add[_all]() and rename it to ide_host_register[_all]().

* Convert host drivers and core code to use struct ide_host.

* Remove no longer needed ide_find_port().

* Make ide_find_port_slot() static.

* Unexport ide_unregister().

v2:
* Add missing 'struct ide_host *host' to macide.c.

v3:
* Fix build problem in pmac.c (s/ide_alloc_host/ide_host_alloc/)
  (Noticed by Stephen Rothwell).

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>