9 years ago[ARM] mmp2: add support for board IRQs
Haojian Zhuang [Thu, 28 Jan 2010 04:34:59 +0000]
[ARM] mmp2: add support for board IRQs

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp2: add missing ICU register definitions
Haojian Zhuang [Thu, 28 Jan 2010 04:27:36 +0000]
[ARM] mmp2: add missing ICU register definitions

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp2: add gpio initialization
Haojian Zhuang [Mon, 25 Jan 2010 11:03:54 +0000]
[ARM] mmp2: add gpio initialization

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp2: add mfpr setting
Haojian Zhuang [Mon, 25 Jan 2010 11:03:25 +0000]
[ARM] mmp2: add mfpr setting

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp2: add mask function in irq-mmp2.c
Haojian Zhuang [Mon, 25 Jan 2010 11:02:50 +0000]
[ARM] mmp2: add mask function in irq-mmp2.c

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years agoMAINTAINERS: add maintainers for Marvell MMP2 (aka ARMADA610) support
Eric Miao [Tue, 5 Jan 2010 07:28:26 +0000]
MAINTAINERS: add maintainers for Marvell MMP2 (aka ARMADA610) support

Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp: support jasper development board
Haojian Zhuang [Wed, 6 Jan 2010 14:07:15 +0000]
[ARM] mmp: support jasper development board

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp: add default configuration for MMP2
Haojian Zhuang [Tue, 5 Jan 2010 07:02:19 +0000]
[ARM] mmp: add default configuration for MMP2

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp: add support for Marvell MMP2
Haojian Zhuang [Fri, 4 Dec 2009 14:41:28 +0000]
[ARM] mmp: add support for Marvell MMP2

Marvell MMP2 (aka ARMADA610) is a SoC based on PJ4 core. It's
ARMv6 compatible.  Support basic interrupt handler and timer,
and basic support for MMP2 based FLINT platform.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp: rename irq.c to irq-pxa168.c to allow other SoC IRQ chips
Eric Miao [Tue, 5 Jan 2010 07:06:37 +0000]
[ARM] mmp: rename irq.c to irq-pxa168.c to allow other SoC IRQ chips

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp: update pxa168_defconfig and include avengers lite support
Haojian Zhuang [Tue, 12 Jan 2010 01:07:45 +0000]
[ARM] mmp: update pxa168_defconfig and include avengers lite support

Signed-off-by: Gavin Gu <gavin.gu@marvell.com>
Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jack Ren <jack.ren@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] mmp: avengers lite (pxa168) board bring up
Haojian Zhuang [Tue, 12 Jan 2010 00:54:50 +0000]
[ARM] mmp: avengers lite (pxa168) board bring up

Signed-off-by: Gavin Gu <gavin.gu@marvell.com>
Signed-off-by: Jing Xiang <jxiang@marvell.com>
Signed-off-by: Jack Ren <jack.ren@marvell.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa/imote2: Remove redundant pin entry for nCS.
Stefan Schmidt [Sat, 13 Feb 2010 20:59:32 +0000]
[ARM] pxa/imote2: Remove redundant pin entry for nCS.

Also remove a trailing whitespace while being there.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa/imote2: Add defconfig for the imote2 platform.
Stefan Schmidt [Sun, 14 Feb 2010 09:19:21 +0000]
[ARM] pxa/imote2: Add defconfig for the imote2 platform.

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years agoASoC: Remove legacy SSP API usage from pxa-ssp.c
Eric Miao [Tue, 9 Feb 2010 11:46:01 +0000]
ASoC: Remove legacy SSP API usage from pxa-ssp.c

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API
Eric Miao [Tue, 9 Feb 2010 03:10:10 +0000]
[ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: define zeus_power_off() only when CONFIG_PM enabled
Stefan Schmidt [Tue, 16 Feb 2010 21:42:55 +0000]
[ARM] pxa: define zeus_power_off() only when CONFIG_PM enabled

Add some safety check for CONFIG_PM around zeus_power_off(). Without
it linking can fail like this:

arch/arm/mach-pxa/built-in.o: In function `zeus_power_off':
e800.c:(.text+0x2bc8): undefined reference to `pxa27x_cpu_suspend'

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Marc Zyngier <maz@misterjones.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: enable check_scoop_reg() only if CONFIG_PM is set.
Stefan Schmidt [Tue, 16 Feb 2010 21:41:52 +0000]
[ARM] pxa: enable check_scoop_reg() only if CONFIG_PM is set.

This function gets only called from scoop_suspend() and scoop_resume() which are
only built in if we have CONFIG_PM set. Make it the same for check_scoop_reg().

This fixes the following warning:
arch/arm/common/scoop.c:143: warning: ‘check_scoop_reg’ defined but not used

Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: add support for Embedian MXM-8x10
Edwin Peer [Fri, 5 Feb 2010 16:31:48 +0000]
[ARM] pxa: add support for Embedian MXM-8x10

Signed-off-by: Edwin Peer <epeer@tmtservices.co.za>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: move board board IRQ definitions out of irqs.h
Eric Miao [Sun, 27 Dec 2009 15:01:25 +0000]
[ARM] pxa: move board board IRQ definitions out of irqs.h

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] sa1111: allow cascaded IRQs to be used by platforms
Eric Miao [Sat, 26 Dec 2009 08:23:02 +0000]
[ARM] sa1111: allow cascaded IRQs to be used by platforms

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] sa1111: avoid using hardcoded IRQ numbers for PCMCIA driver
Eric Miao [Sat, 26 Dec 2009 04:32:38 +0000]
[ARM] sa1111: avoid using hardcoded IRQ numbers for PCMCIA driver

The IRQs for card detect and status change are currently hardcoded in
SA1111 PCMCIA driver, which can be actually obtained from the .irq[]
from 'struct sa1111_dev' to keep it generic.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] locomo: allow cascaded IRQ base to be specified by platforms
Eric Miao [Fri, 5 Feb 2010 02:07:33 +0000]
[ARM] locomo: allow cascaded IRQ base to be specified by platforms

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] locomo: remove unused IRQs and avoid unnecessary cascade
Eric Miao [Fri, 25 Dec 2009 04:18:33 +0000]
[ARM] locomo: remove unused IRQs and avoid unnecessary cascade

IRQ_LOCOMO_* are never used elsewhere, remove these definitions. As well
as the cascade of these IRQs. IRQ_LOCOMO_*_BASE changed to IRQ_LOCOMO_*.

IRQ_LOCOMO_LT and IRQ_LOCOMO_SPI are likely to be used in a same way as
IRQ_LOCOMO_KEY.

IRQ_LOCOMO_GPIO and the demultiplex handler should really be living
somewhere else.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] locomo: avoid unnecessary cascaded keyboard IRQ
Eric Miao [Fri, 5 Feb 2010 01:13:55 +0000]
[ARM] locomo: avoid unnecessary cascaded keyboard IRQ

It is not necessary and is over-complicated for IRQ_LOCOMO_KEY to
be a cascaded IRQ of IRQ_LOCOMO_KEY_BASE. Removed and introduced
locomokbd_{open,close} for masking/unmasking of the keyboard IRQ.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] sa1100: remove unreferenced IRQ definitions
Eric Miao [Wed, 23 Dec 2009 06:52:07 +0000]
[ARM] sa1100: remove unreferenced IRQ definitions

These IRQ definitions related to LOCOMO are never referenced anywhere,
thus could be safely removed.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa/tosa: make use of the matrix keypad driver
Eric Miao [Fri, 1 Jan 2010 07:28:21 +0000]
[ARM] pxa/tosa: make use of the matrix keypad driver

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers
Eric Miao [Mon, 4 Jan 2010 05:34:05 +0000]
[ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers

Cc: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: remove now unnecessary pxa_gpio_mode() calls in ac97
Eric Miao [Mon, 4 Jan 2010 09:14:21 +0000]
[ARM] pxa: remove now unnecessary pxa_gpio_mode() calls in ac97

Now most (if not all) PXA platforms have been switched to the new MFP
API, it's rather safe to remove these unnecessary pxa_gpio_mode() calls
in pxa2xx-ac97-lib.c now.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: add the missing AC97 pin configurations
Eric Miao [Mon, 4 Jan 2010 09:00:13 +0000]
[ARM] pxa: add the missing AC97 pin configurations

Missing AC97 pin configurations are added where pxa_set_ac97_info() are
called for all pxa25x/pxa27x platforms. Where no exact configuration is
provided, use the default as in sound/arm/pxa2xx-ac97-lib.c

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()
Eric Miao [Mon, 4 Jan 2010 08:30:58 +0000]
[ARM] pxa: introduce processor specific pxa27x_assert_ac97reset()

This is really pxa27x specific and should be kept in pxa27x.c. With this
newly introduced function, the original set_resetgpio_mode() is deprecated.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: remove the unnecessary restoring of MFP registers
Eric Miao [Mon, 4 Jan 2010 08:26:32 +0000]
[ARM] pxa: remove the unnecessary restoring of MFP registers

MFP registers are saved and restored by the mfp sys_device before all
other platform devices, and it is unnecessary here.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms
Eric Miao [Mon, 4 Jan 2010 03:37:14 +0000]
[ARM] pxa: simplify the LCD pin configuration for pxa27x platforms

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms
Eric Miao [Mon, 4 Jan 2010 03:25:10 +0000]
[ARM] pxa: simplify the LCD pin configuration for pxa25x platforms

There are only limited possible LCD pin configurations for pxa25x
platforms, simplify this by macro.

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years ago[ARM] pxa: use chip->ack() instead of accessing GEDR directly
Eric Miao [Fri, 1 Jan 2010 07:29:22 +0000]
[ARM] pxa: use chip->ack() instead of accessing GEDR directly

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

9 years agoMerge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable
Russell King [Thu, 25 Feb 2010 20:41:34 +0000]
Merge branch 'for-rmk' of git://git.marvell.com/orion into devel-stable

9 years ago[ARM] MV78xx0: Support for Buffalo WXL (Terastation Duo)
Sebastien Requiem [Tue, 23 Feb 2010 13:51:24 +0000]
[ARM] MV78xx0: Support for Buffalo WXL (Terastation Duo)

* Modification of Kconfig to add the Option
* 1 new file : buffalo-wxl-setup.c
This file is inspired from the db-78xx0-setup.c already present.
The following is done:
  - Configure MPP Lines for the plateform (see my patch for MPP)
This is taken from the stock kernel provided by buffalotech (the vendor)
  - GigaBit Ethernet
  - Sata
  - Uart are initiallized in a different way than on the dev board as we
have one core only.
  - USB

The kernel has been running for some days now on my plateform.

Signed-off-by: Sebastien Requiem <sebastien@kolios.dk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

9 years ago[ARM] MV78XX0: MPP routines and definitions
Sebastien Requiem [Tue, 23 Feb 2010 13:38:14 +0000]
[ARM] MV78XX0: MPP routines and definitions

This patch is composed of two new files :

- mpp.c which is mainly inspired by the same file as in mach-kirkwood

- mpp.h that is written from the documentation provided by Marvell
http://www.marvell.com/products/processors/embedded/discovery_innovation/HW_MV78100_OpenSource.pdf

Moreover, due to some implementation problem, I have
defined some MPPX_UNUSED that offer developers the possibility
to SET MPP to some unused value (such as for Buffalo WXL).

Note: This patch doesn't support MV78200 yet (only 78100 MPP lines have
been written)

Signed-off-by: Sebastien Requiem <sebastien@kolios.dk>
Signed-off-by: Nicolas Pitre <nico@marvell.com>

9 years ago[ARM] eSATA SheevaPlug: correlate MPP to SD CD and SD WP
John Holland [Fri, 19 Feb 2010 22:11:04 +0000]
[ARM] eSATA SheevaPlug: correlate MPP to SD CD and SD WP

Accept SD CD and SD WP in accordance to
http://plugcomputer.org/data/docs/Sheeva-PowerPlug-V1.3-GTI-090906.pdf
on MPP 47 and 44 respectively on the eSATA SheevaPlug

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
--

9 years ago[ARM] eSATA SheevaPlug: configure SoC SATA interface
John Holland [Fri, 19 Feb 2010 22:11:01 +0000]
[ARM] eSATA SheevaPlug: configure SoC SATA interface

Enable the kirkwood SATA SoC interface on the eSATA SheevaPlug.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
--

9 years ago[ARM] eSATA SheevaPlug basic board support
John Holland [Fri, 19 Feb 2010 22:10:58 +0000]
[ARM] eSATA SheevaPlug basic board support

Allow basic eSATA SheevaPlug board configuration and build.

Signed-off-by: John Holland <john.holland@cellent-fs.de>
Signed-off-by: Nicolas Pitre <nico@marvell.com>
--

9 years agoARM: Update mach-types
Russell King [Sat, 20 Feb 2010 14:16:16 +0000]
ARM: Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 5951/1: ARM: fix documentation of the PrimeCell bus
Linus Walleij [Sat, 20 Feb 2010 08:41:30 +0000]
ARM: 5951/1: ARM: fix documentation of the PrimeCell bus

This fixes the filepath encoded in <linux/amba/bus.h> and adds
some documentation as to what this bus really means.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 5950/1: ARM: Fix build error for arm1026ej-s processor
Abdoulaye Walsimou Gaye [Fri, 19 Feb 2010 11:47:14 +0000]
ARM: 5950/1: ARM: Fix build error for arm1026ej-s processor

This patch fix the below build error for arm1026ej-s processor (IntegratorCP/arm1026ej-s board).
CC init/main.o
In file included from include/linux/highmem.h:8,
                 from include/linux/pagemap.h:10,
                 from include/linux/mempolicy.h:62,
                 from init/main.c:52:
arch/arm/include/asm/cacheflush.h:134:2: error: #error Unknown cache maintainence model
make[1]: *** [init/main.o] Erreur 1
make: *** [init] Erreur 2

Signed-off-by: Abdoulaye Walsimou Gaye <walsimou@walsimou.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoMerge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline
Russell King [Thu, 18 Feb 2010 23:35:24 +0000]
Merge branch 'for-rmk' of git://gitorious.org/linux-gemini/mainline

9 years agoMAINTAINERS: fix my e-mail and status for Gemini and FA526
Paulius Zaleckas [Thu, 18 Feb 2010 19:54:12 +0000]
MAINTAINERS: fix my e-mail and status for Gemini and FA526

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>

9 years agoGemini: wrong registers used to set reg_level in gpio_set_irq_type()
Roel Kluin [Thu, 18 Feb 2010 19:54:11 +0000]
Gemini: wrong registers used to set reg_level in gpio_set_irq_type()

It appears the wrong GPIO registers were used

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>

9 years agoARM: 5944/1: scsi: fix timer setup in fas216.c
Guennadi Liakhovetski [Thu, 18 Feb 2010 17:07:18 +0000]
ARM: 5944/1: scsi: fix timer setup in fas216.c

mod_timer() takes an absolute time and not a delay as its argument.

Cc: <stable@kernel.org>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Thu, 18 Feb 2010 16:31:14 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add KEY_RFKILL
  Input: i8042 - fix KBC jam during hibernate

9 years agoARM: 5938/1: ARM: L2: export outer_cache_fns
Santosh Shilimkar [Tue, 16 Feb 2010 06:57:43 +0000]
ARM: 5938/1: ARM: L2: export outer_cache_fns

The 'outer_cache' variable is needed by the outer_inv_range(),
outer_clean_range() and outer_flush_range() functions, which are
declared as inline in asm/cacheflush.h.  Otherwise drivers built
as a loadable module, which access these functions, will have
an undefined symbol.

Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Thu, 18 Feb 2010 16:13:39 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: fix "acpi=ht" boot option
  ACPI, i915: blacklist Clevo M5x0N bad_lid state
  ACPI: fix High cpu temperature with 2.6.32
  ACPI: dock: properly initialize local struct dock_station in dock_add()
  ACPI: remove Asus P2B-DS from acpi=ht blacklist
  thinkpad-acpi: wrong thermal attribute_group removed in thermal_exit()
  ACPI: acpi_bus_{scan,bus,add}: return -ENODEV if no device was found
  ACPI: Add NULL pointer check in acpi_bus_start
  ACPI: processor: only evaluate _PDC once per processor
  ACPI: processor: add kernel command line support for early _PDC eval

9 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Thu, 18 Feb 2010 16:10:21 +0000]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: fix bo's fence association
  drm/radeon/kms: fix indirect buffer management V2
  drm/edid: Fix interlaced detailed timings to be frame size, not field.
  drm/vmwgfx: Use fb handover mechanism instead of stealth mode.
  drm/radeon/kms: use udelay for short delays
  drm/nouveau: Force TV encoder DPMS reinit after resume.
  drm/nouveau: use mutex for vbios lock

9 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 18 Feb 2010 16:07:54 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/85xx: Fix SMP when "cpu-release-addr" is in lowmem
  powerpc/85xx: Fix oops during MSI driver probe on MPC85xxMDS boards

9 years agoInput: add KEY_RFKILL
Matthew Garrett [Wed, 17 Feb 2010 20:21:45 +0000]
Input: add KEY_RFKILL

Most laptops have keys that are intended to toggle all device state, not
just wifi. These are currently generally mapped to KEY_WLAN. As a result,
rfkill will only kill or enable wifi in response to the key press. This
confuses users and can make it difficult for them to enable bluetooth
and wwan devices.

This patch adds a new keycode, KEY_RFKILL. It indicates that the system
should toggle the state of all rfkillable devices.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoInput: i8042 - fix KBC jam during hibernate
Alan Jenkins [Wed, 17 Feb 2010 20:17:33 +0000]
Input: i8042 - fix KBC jam during hibernate

633aae2 "Input: i8042 - switch to using dev_pm_ops" removed handling
for PMSG_THAW, since we do not need to do anything during freeze and
thus it was thougt that thaw is not needed as well. However, there is
a period when interrupts are kept off, and if key happens to be pressed
during that time KBC becomes jammed. To avoid the jam we simply need
to poll KBC once during thaw.

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

9 years agoMerge branches 'bugzilla-14886', 'bugzilla-15000', 'bugzilla-15040', 'bugzilla-15108...
Len Brown [Thu, 18 Feb 2010 08:51:04 +0000]
Merge branches 'bugzilla-14886', 'bugzilla-15000', 'bugzilla-15040', 'bugzilla-15108', 'pdc', 'hotplug-null-ref' and 'thinkpad' into release

9 years agoACPI: fix "acpi=ht" boot option
Len Brown [Tue, 16 Feb 2010 08:45:45 +0000]
ACPI: fix "acpi=ht" boot option

We broke "acpi=ht" in 2.6.32 by disabling MADT parsing
for acpi=disabled.  e5b8fc6ac158f65598f58dba2c0d52ba3b412f52
This also broke systems which invoked acpi=ht via DMI blacklist.

acpi=ht is a really ugly hack,
but restore it for those that still use it.

http://bugzilla.kernel.org/show_bug.cgi?id=14886

Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoMerge branch 'for-airlied' of git://git.freedesktop.org/git/nouveau/linux-2.6 into...
Dave Airlie [Thu, 18 Feb 2010 05:09:12 +0000]
Merge branch 'for-airlied' of git://git.freedesktop.org/git/nouveau/linux-2.6 into drm-linus

* 'for-airlied' of git://git.freedesktop.org/git/nouveau/linux-2.6:
  drm/nouveau: Force TV encoder DPMS reinit after resume.
  drm/nouveau: use mutex for vbios lock

9 years agodrm/radeon/kms: fix bo's fence association
Jerome Glisse [Mon, 15 Feb 2010 20:36:33 +0000]
drm/radeon/kms: fix bo's fence association

Previous code did associate fence to bo before the fence was emited
and it also didn't lock protected access to ttm sync_obj member.
Both of this flaw leads to possible race between different code
path. This patch fix this by associating fence only once the fence
is emitted and properly lock protect access to sync_obj member of
ttm.

Fix:
https://bugs.freedesktop.org/show_bug.cgi?id=26438
and likely similar others bugs
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix indirect buffer management V2
Jerome Glisse [Mon, 15 Feb 2010 20:36:13 +0000]
drm/radeon/kms: fix indirect buffer management V2

There is 3 different distinct states for an indirect buffer (IB) :
  1- free with no fence
  2- free with a fence
  3- non free (fence doesn't matter)
Previous code mixed case 2 & 3 in a single one leading to possible
catastrophique failure. This patch rework the handling and properly
separate each case. So when you get ib we set the ib as non free and
fence status doesn't matter. Fence become active (ie has a meaning
for the ib code) once the ib is scheduled or free. This patch also
get rid of the alloc bitmap as it was overkill, we know go through
IB pool list like in a ring buffer as the oldest IB is the first
one the will be free.

Fix :
https://bugs.freedesktop.org/show_bug.cgi?id=26438
and likely other bugs.

V2 remove the scheduled list, it's useless now, fix free ib scanning

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/edid: Fix interlaced detailed timings to be frame size, not field.
Adam Jackson [Mon, 15 Feb 2010 22:15:39 +0000]
drm/edid: Fix interlaced detailed timings to be frame size, not field.

cf. https://bugzilla.redhat.com/show_bug.cgi?id=533561

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/vmwgfx: Use fb handover mechanism instead of stealth mode.
Thomas Hellstrom [Mon, 15 Feb 2010 14:45:22 +0000]
drm/vmwgfx: Use fb handover mechanism instead of stealth mode.

When the vmwgfx module is loaded on top of vesafb, it would operate in
stealth mode in parallel with vesafb, evicting VRAM on dropmaster.

Change that to use the vesafb handover mechanism, like other drmfb drivers.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: use udelay for short delays
Dave Airlie [Sat, 30 Jan 2010 21:07:14 +0000]
drm/radeon/kms: use udelay for short delays

For usec delays use udelay instead of scheduling, this should
allow reclocking to happen faster. This also was the cause
of reported 33s delays at bootup on certain systems.

fixes: freedesktop.org bug 25506

Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Wed, 17 Feb 2010 00:56:21 +0000]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: 8250: add serial transmitter fully empty test

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Wed, 17 Feb 2010 00:55:39 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: gadget: fix EEM gadget CRC usage
  USB: otg Kconfig: let USB_OTG_UTILS select USB_ULPI option
  USB: g_multi: fix CONFIG_USB_G_MULTI_RNDIS usage
  kfifo: Don't use integer as NULL pointer
  USB: FHCI: Fix build after kfifo rework
  kfifo: Make kfifo_initialized work after kfifo_free
  USB: serial: add usbid for dell wwan card to sierra.c
  USB: SIS USB2VGA DRIVER: support KAIREN's USB VGA adaptor USB20SVGA-MB-PLUS
  USB: ehci: phy low power mode bug fixing
  USB: s3c-hsotg: Export usb_gadget_register_driver()
  USB: r8a66597-udc: Prototype IS_ERR() and PTR_ERR()
  USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT)
  USB: storage: Remove unneeded SC/PR from unusual_devs.h
  USB: ftdi_sio: new device id for papouch AD4USB
  USB: usbfs: properly clean up the as structure on error paths
  USB: usbfs: only copy the actual data received

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6
Linus Torvalds [Wed, 17 Feb 2010 00:55:13 +0000]
Merge git://git./linux/kernel/git/gregkh/driver-core-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  class: Free the class private data in class_release
  sysfs: sysfs_sd_setattr set iattrs unconditionally

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Wed, 17 Feb 2010 00:52:04 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (22 commits)
  be2net: set proper value to version field in req hdr
  xfrm: Fix xfrm_state_clone leak
  ipcomp: Avoid duplicate calls to ipcomp_destroy
  ethtool: allow non-admin user to read GRO settings.
  ixgbe: fix WOL register setup for 82599
  ixgbe: Fix - Do not allow Rx FC on 82598 at 1G due to errata
  sfc: Fix SFE4002 initialisation
  mac80211: fix handling of null-rate control in rate_control_get_rate
  inet: Remove bogus IGMPv3 report handling
  iwlwifi: fix AMSDU Rx after paged Rx patch
  tcp: fix ICMP-RTO war
  via-velocity: Fix races on shared interrupts
  via-velocity: Take spinlock on set coalesce
  via-velocity: Remove unused IRQ status parameter from rx_srv and tx_srv
  rtl8187: Add new device ID
  iwmc3200wifi: Test of wrong pointer after kzalloc in iwm_mlme_update_bss_table()
  ath9k: Fix sequence numbers for PAE frames
  mac80211: fix deferred hardware scan requests
  iwlwifi: Fix to set correct ht configuration
  mac80211: Fix probe request filtering in IBSS mode
  ...

9 years agoserial: 8250: add serial transmitter fully empty test
Dick Hollenbeck [Wed, 9 Dec 2009 20:31:34 +0000]
serial: 8250: add serial transmitter fully empty test

When controlling an industrial radio modem it can be necessary to
manipulate the handshake lines in order to control the radio modem's
transmitter, from userspace.

The transmitter should not be turned off before all characters have been
transmitted.  serial8250_tx_empty() was reporting that all characters were
transmitted before they actually were.

===

Discovered in parallel with more testing and analysis by Kees Schoenmakers
as follows:

I ran into an NetMos 9835 serial pci board which behaves a little
different than the standard.  This type of expansion board is very common.

"Standard" 8250 compatible devices clear the 'UART_LST_TEMT" bit together
with the "UART_LSR_THRE" bit when writing data to the device.

The NetMos device does it slightly different

I believe that the TEMT bit is coupled to the shift register.  The problem
is that after writing data to the device and very quickly after that one
does call serial8250_tx_empty, it returns the wrong information.

My patch makes the test more robust (and solves the problem) and it does
not affect the already correct devices.

Alan:

  We may yet need to quirk this but now we know which chips we have a
  way to do that should we find this breaks some other 8250 clone with
  dodgy THRE.

Signed-off-by: Dick Hollenbeck <dick@softplc.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: Kees Schoenmakers <k.schoenmakers@sigmae.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoclass: Free the class private data in class_release
Laurent Pinchart [Wed, 10 Feb 2010 12:32:49 +0000]
class: Free the class private data in class_release

Fix a memory leak by freeing the memory allocated in __class_register
for the class private data.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agosysfs: sysfs_sd_setattr set iattrs unconditionally
Eric W. Biederman [Thu, 4 Feb 2010 07:13:24 +0000]
sysfs: sysfs_sd_setattr set iattrs unconditionally

There is currently a bug in sysfs_sd_setattr inherited from
sysfs_setattr in 2.6.32 where the first time we set the attributes
on a sysfs file we allocate backing store but do not set the
backing store attributes.  Resulting in overly restrictive
permissions on sysfs files.

The fix is to simply modify the code so that it always executes
when we update the sysfs attributes, as we did in 2.6.31 and earlier.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Tested-by: Jean Delvare <khali@linux-fr.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: gadget: fix EEM gadget CRC usage
Brian Niebuhr [Mon, 25 Jan 2010 20:45:40 +0000]
USB: gadget: fix EEM gadget CRC usage

eem_wrap() is sending a sentinel CRC, but it didn't indicate that to
the host, it should zero bit 14 (bmCRC) in the EEM packet header,
instead of setting it.

Also remove a redundant crc calculation in eem_unwrap().

Signed-off-by: Steve Longerbeam <stevel@netspectrum.com>
Acked-by: Brian Niebuhr <bniebuhr@efjohnson.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: otg Kconfig: let USB_OTG_UTILS select USB_ULPI option
Valentin Longchamp [Wed, 20 Jan 2010 19:06:31 +0000]
USB: otg Kconfig: let USB_OTG_UTILS select USB_ULPI option

With CONFIG_USB_ULPI=y, CONFIG_USB<=m, CONFIG_PCI=n and
CONFIG_USB_OTG_UTILS=n, which is the default used for mx31moboard,
the build for all mx3 platforms fails because drivers/usb/otg/ulpi.c
where otg_ulpi_create is defined is not compiled.

Build error:
arch/arm/mach-mx3/built-in.o: In function `mxc_board_init':
kzmarm11.c:(.init.text+0x73c): undefined reference to `otg_ulpi_create'
kzmarm11.c:(.init.text+0x1020): undefined reference to `otg_ulpi_create'

This isn't a strong dependency as drivers/usb/otg/ulpi.c doesn't
use functions defined in drivers/usb/otg/otg.o and is only needed
to get ulpi.o linked into the kernel image.

Signed-off-by: Valentin Longchamp <valentin.longchamp@epfl.ch>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: g_multi: fix CONFIG_USB_G_MULTI_RNDIS usage
Michal Nazarewicz [Fri, 22 Jan 2010 14:18:21 +0000]
USB: g_multi: fix CONFIG_USB_G_MULTI_RNDIS usage

g_multi used CONFIG_USB_ETH_RNDIS to check if RNDIS option was requested
where it should check for CONFIG_USB_G_MULTI_RNDIS.  As a result, RNDIS
was never present in g_multi regardless of configuration.

This fixes changes made in commit 396cda90d228d0851f3d64c7c85a1ecf6b8ae1e8.

Signed-off-by: Michal Nazarewicz <m.nazarewicz@samsung.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agokfifo: Don't use integer as NULL pointer
Anton Vorontsov [Wed, 27 Jan 2010 14:09:38 +0000]
kfifo: Don't use integer as NULL pointer

This patch fixes following sparse warnings:

include/linux/kfifo.h:127:25: warning: Using plain integer as NULL pointer
kernel/kfifo.c:83:21: warning: Using plain integer as NULL pointer

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: FHCI: Fix build after kfifo rework
Anton Vorontsov [Wed, 27 Jan 2010 14:09:36 +0000]
USB: FHCI: Fix build after kfifo rework

After kfifo rework FHCI fails to build:

CC drivers/usb/host/fhci-tds.o
drivers/usb/host/fhci-tds.c: In function 'fhci_ep0_free':
drivers/usb/host/fhci-tds.c:108: error: used struct type value where scalar is required
drivers/usb/host/fhci-tds.c:118: error: used struct type value where scalar is required
drivers/usb/host/fhci-tds.c:128: error: used struct type value where scalar is required

This is because kfifos are no longer pointers in the ep struct.
So, instead of checking the pointers, we should now check if kfifo
is initialized.

Reported-by: Josh Boyer <jwboyer@gmail.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agokfifo: Make kfifo_initialized work after kfifo_free
Anton Vorontsov [Wed, 27 Jan 2010 14:09:34 +0000]
kfifo: Make kfifo_initialized work after kfifo_free

After kfifo rework it's no longer possible to reliably know if kfifo is
usable, since after kfifo_free(), kfifo_initialized() would still return
true. The correct behaviour is needed for at least FHCI USB driver.

This patch fixes the issue by resetting the kfifo to zero values (the
same approach is used in kfifo_alloc() if allocation failed).

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Stefani Seibold <stefani@seibold.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: serial: add usbid for dell wwan card to sierra.c
Richard Farina [Wed, 20 Jan 2010 21:42:33 +0000]
USB: serial: add usbid for dell wwan card to sierra.c

This patch adds support for Dell Computer Corp. Wireless 5720 VZW Mobile
Broadband (EVDO Rev-A) Minicard GPS Port.  I stole the name from lsusb,
but my card does not have a GPS on it (at least not that I can make
function). I'm sure the patch is whitespace damaged but the one line
addition should be fairly straightforward nonetheless.

Tested-by: Rick Farina <sidhayn@gmail.com>
Signed-off-by: Rick Farina <sidhayn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: SIS USB2VGA DRIVER: support KAIREN's USB VGA adaptor USB20SVGA-MB-PLUS
Tanaka Akira [Wed, 20 Jan 2010 17:31:09 +0000]
USB: SIS USB2VGA DRIVER: support KAIREN's USB VGA adaptor USB20SVGA-MB-PLUS

This patch adds the USB product ID of KAIREN's USB VGA Adaptor,
USB20SVGA-MB-PLUS, to sisusbvga work with it.

Signed-off-by: Tanaka Akira <akr@fsij.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: ehci: phy low power mode bug fixing
Alek Du [Tue, 19 Jan 2010 08:31:31 +0000]
USB: ehci: phy low power mode bug fixing

1. There are two msleep calls inside two spin lock sections, need to unlock
   and lock again after msleep.
2. Save a extra status reg setting.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: s3c-hsotg: Export usb_gadget_register_driver()
Mark Brown [Mon, 18 Jan 2010 13:18:34 +0000]
USB: s3c-hsotg: Export usb_gadget_register_driver()

USB gadget controller drivers normally export their driver registration
function, allowing modular builds of the individual gadget drivers so
do so for s3c-hsotg, fixing builds.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: r8a66597-udc: Prototype IS_ERR() and PTR_ERR()
Mark Brown [Mon, 18 Jan 2010 12:03:18 +0000]
USB: r8a66597-udc: Prototype IS_ERR() and PTR_ERR()

The build of r8a66597-udc was failing on ARM since IS_ERR() and
PTR_ERR() weren't protyped.  Presumably err.h is being pulled in by
another header on other platforms.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT)
Andreas Mohr [Sun, 17 Jan 2010 10:45:38 +0000]
USB: ftdi_sio: add device IDs (several ELV, one Mindstorms NXT)

- add FTDI device IDs for several ELV devices and NXTCam of Lego Mindstorms NXT
- add hopefully helpful new_id comment
- remove less helpful "Due to many user requests for multiple ELV devices we enable
  them by default." comment (we simply add _all_ known devices - an
  enduser shouldn't have to fiddle with obscure module parameters...).
- add myself to DRIVER_AUTHOR

The missing NXTCam ID has been found at
http://www.unixboard.de/vb3/showthread.php?t=44155
, ELV devices taken from ELV Windows .inf file.

Signed-off-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: storage: Remove unneeded SC/PR from unusual_devs.h
Phil Dibowitz [Sat, 16 Jan 2010 18:52:17 +0000]
USB: storage: Remove unneeded SC/PR from unusual_devs.h

This patch removes the subclass and protocol entries from a Microtech
entry in unusual_devs.h. This was reported by <ryck@pacbell.net>.

Greg, please apply.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: ftdi_sio: new device id for papouch AD4USB
Radek Liboska [Wed, 27 Jan 2010 14:38:34 +0000]
USB: ftdi_sio: new device id for papouch AD4USB

added new device pid (PAPOUCH_AD4USB_PID) to ftdi_sio.h and ftdi_sio.c

AD4USB measuring converter is a 4-input A/D converter which enables the
user to measure to four current inputs ranging from 0(4) to 20 mA or
voltage between 0 and 10 V. The measured values are then transferred to
a superior system in digital form. The AD4USB communicates via USB.
Powered is also via USB.  datasheet in english is here:
http://www.papouch.com/shop/scripts/pdf/ad4usb_en.pdf

Signed-off-by: Radek Liboska <liboska@uochb.cas.cz>

9 years agoUSB: usbfs: properly clean up the as structure on error paths
Linus Torvalds [Tue, 16 Feb 2010 20:35:07 +0000]
USB: usbfs: properly clean up the as structure on error paths

I notice that the processcompl_compat() function seems to be leaking the
'struct async *as' in the error paths.

I think that the calling convention is fundamentally buggered. The
caller is the one that did the "reap_as()" to get the as thing, the
caller should be the one to free it too.

Freeing it in the caller also means that it very clearly always gets
freed, and avoids the need for any "free in the error case too".

From: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Marcus Meissner <meissner@suse.de>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agoUSB: usbfs: only copy the actual data received
Greg KH [Mon, 15 Feb 2010 17:37:46 +0000]
USB: usbfs: only copy the actual data received

We need to only copy the data received by the device to userspace, not
the whole kernel buffer, which can contain "stale" data.

Thanks to Marcus Meissner for pointing this out and testing the fix.

Reported-by: Marcus Meissner <meissner@suse.de>
Tested-by: Marcus Meissner <meissner@suse.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

9 years agobe2net: set proper value to version field in req hdr
Ajit Khaparde [Tue, 16 Feb 2010 00:18:46 +0000]
be2net: set proper value to version field in req hdr

Before sending a command to the ASIC, set version properly.
This is necessary for the ARM firmware to send correct data to the driver.
This also fixes a bug in certain skews of the ASIC where the statistics
are misreported.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoxfrm: Fix xfrm_state_clone leak
Herbert Xu [Mon, 15 Feb 2010 20:00:51 +0000]
xfrm: Fix xfrm_state_clone leak

xfrm_state_clone calls kfree instead of xfrm_state_put to free
a failed state.  Depending on the state of the failed state, it
can cause leaks to things like module references.

All states should be freed by xfrm_state_put past the point of
xfrm_init_state.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoipcomp: Avoid duplicate calls to ipcomp_destroy
Herbert Xu [Mon, 15 Feb 2010 19:24:30 +0000]
ipcomp: Avoid duplicate calls to ipcomp_destroy

When ipcomp_tunnel_attach fails we will call ipcomp_destroy twice.
This may lead to double-frees on certain structures.

As there is no reason to explicitly call ipcomp_destroy, this patch
removes it from ipcomp*.c and lets the standard xfrm_state destruction
take place.

This is based on the discovery and patch by Alexey Dobriyan.

Tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoethtool: allow non-admin user to read GRO settings.
stephen hemminger [Thu, 11 Feb 2010 13:48:29 +0000]
ethtool: allow non-admin user to read GRO settings.

Looks like an oversight in GRO design.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
Linus Torvalds [Tue, 16 Feb 2010 20:22:15 +0000]
Merge git://git./linux/kernel/git/agk/linux-2.6-dm

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm: sysfs revert add empty release function to avoid debug warning
  dm mpath: fix stall when requeueing io
  dm raid1: fix null pointer dereference in suspend
  dm raid1: fail writes if errors are not handled and log fails
  dm log: userspace fix overhead_size calcuations
  dm snapshot: persistent annotate work_queue as on stack
  dm stripe: avoid divide by zero with invalid stripe count

9 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Tue, 16 Feb 2010 19:59:01 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] preserve personality flag bits across exec

9 years agodm: sysfs revert add empty release function to avoid debug warning
Alasdair G Kergon [Tue, 16 Feb 2010 18:43:04 +0000]
dm: sysfs revert add empty release function to avoid debug warning

Revert commit d2bb7df8cac647b92f51fb84ae735771e7adbfa7 at Greg's request.

    Author: Milan Broz <mbroz@redhat.com>
    Date:   Thu Dec 10 23:51:53 2009 +0000

    dm: sysfs add empty release function to avoid debug warning

    This patch just removes an unnecessary warning:
     kobject: 'dm': does not have a release() function,
     it is broken and must be fixed.

    The kobject is embedded in mapped device struct, so
    code does not need to release memory explicitly here.

Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

9 years agodm mpath: fix stall when requeueing io
Kiyoshi Ueda [Tue, 16 Feb 2010 18:43:01 +0000]
dm mpath: fix stall when requeueing io

This patch fixes the problem that system may stall if target's ->map_rq
returns DM_MAPIO_REQUEUE in map_request().
E.g. stall happens on 1 CPU box when a dm-mpath device with queue_if_no_path
     bounces between all-paths-down and paths-up on I/O load.

When target's ->map_rq returns DM_MAPIO_REQUEUE, map_request() requeues
the request and returns to dm_request_fn().  Then, dm_request_fn()
doesn't exit the I/O dispatching loop and continues processing
the requeued request again.
This map and requeue loop can be done with interrupt disabled,
so 1 CPU system can be stalled if this situation happens.

For example, commands below can stall my 1 CPU box within 1 minute or so:
  # dmsetup table mp
  mp: 0 2097152 multipath 1 queue_if_no_path 0 1 1 service-time 0 1 2 8:144 1 1
  # while true; do dd if=/dev/mapper/mp of=/dev/null bs=1M count=100; done &
  # while true; do \
  > dmsetup message mp 0 "fail_path 8:144" \
  > dmsetup suspend --noflush mp \
  > dmsetup resume mp \
  > dmsetup message mp 0 "reinstate_path 8:144" \
  > done

To fix the problem above, this patch changes dm_request_fn() to exit
the I/O dispatching loop once if a request is requeued in map_request().

Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

9 years agodm raid1: fix null pointer dereference in suspend
Takahiro Yasui [Tue, 16 Feb 2010 18:42:58 +0000]
dm raid1: fix null pointer dereference in suspend

When suspending a failed mirror, bios are completed by mirror_end_io() and
__rh_lookup() in dm_rh_dec() returns NULL where a non-NULL return value is
required by design.  Fix this by not changing the state of the recovery failed
region from DM_RH_RECOVERING to DM_RH_NOSYNC in dm_rh_recovery_end().

Issue

On 2.6.33-rc1 kernel, I hit the bug when I suspended the failed
mirror by dmsetup command.

BUG: unable to handle kernel NULL pointer dereference at 00000020
IP: [<f94f38e2>] dm_rh_dec+0x35/0xa1 [dm_region_hash]
...
EIP: 0060:[<f94f38e2>] EFLAGS: 00010046 CPU: 0
EIP is at dm_rh_dec+0x35/0xa1 [dm_region_hash]
EAX: 00000286 EBX: 00000000 ECX: 00000286 EDX: 00000000
ESI: eff79eac EDI: eff79e80 EBP: f6915cd4 ESP: f6915cc4
 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process dmsetup (pid: 2849, ti=f6914000 task=eff03e80 task.ti=f6914000)
 ...
Call Trace:
 [<f9530af6>] ? mirror_end_io+0x53/0x1b1 [dm_mirror]
 [<f9413104>] ? clone_endio+0x4d/0xa2 [dm_mod]
 [<f9530aa3>] ? mirror_end_io+0x0/0x1b1 [dm_mirror]
 [<f94130b7>] ? clone_endio+0x0/0xa2 [dm_mod]
 [<c02d6bcb>] ? bio_endio+0x28/0x2b
 [<f952f303>] ? hold_bio+0x2d/0x62 [dm_mirror]
 [<f952f942>] ? mirror_presuspend+0xeb/0xf7 [dm_mirror]
 [<c02aa3e2>] ? vmap_page_range+0xb/0xd
 [<f9414c8d>] ? suspend_targets+0x2d/0x3b [dm_mod]
 [<f9414ca9>] ? dm_table_presuspend_targets+0xe/0x10 [dm_mod]
 [<f941456f>] ? dm_suspend+0x4d/0x150 [dm_mod]
 [<f941767d>] ? dev_suspend+0x55/0x18a [dm_mod]
 [<c0343762>] ? _copy_from_user+0x42/0x56
 [<f9417fb0>] ? dm_ctl_ioctl+0x22c/0x281 [dm_mod]
 [<f9417628>] ? dev_suspend+0x0/0x18a [dm_mod]
 [<f9417d84>] ? dm_ctl_ioctl+0x0/0x281 [dm_mod]
 [<c02c3c4b>] ? vfs_ioctl+0x22/0x85
 [<c02c422c>] ? do_vfs_ioctl+0x4cb/0x516
 [<c02c42b7>] ? sys_ioctl+0x40/0x5a
 [<c0202858>] ? sysenter_do_call+0x12/0x28

Analysis

When recovery process of a region failed, dm_rh_recovery_end() function
changes the state of the region from RM_RH_RECOVERING to DM_RH_NOSYNC.
When recovery_complete() is executed between dm_rh_update_states() and
dm_writes() in do_mirror(), bios are processed with the region state,
DM_RH_NOSYNC. However, the region data is freed without checking its
pending count when dm_rh_update_states() is called next time.

When bios are finished by mirror_end_io(), __rh_lookup() in dm_rh_dec()
returns NULL even though a valid return value are expected.

Solution

Remove the state change of the recovery failed region from DM_RH_RECOVERING
to DM_RH_NOSYNC in dm_rh_recovery_end(). We can remove the state change
because:

  - If the region data has been released by dm_rh_update_states(),
    a new region data is created with the state of DM_RH_NOSYNC, and
    bios are processed according to the DM_RH_NOSYNC state.

  - If the region data has not been released by dm_rh_update_states(),
    a state of the region is DM_RH_RECOVERING and bios are put in the
    delayed_bio list.

The flag change from DM_RH_RECOVERING to DM_RH_NOSYNC in dm_rh_recovery_end()
was added in the following commit:
  dm raid1: handle resync failures
  author  Jonathan Brassow <jbrassow@redhat.com>
    Thu, 12 Jul 2007 16:29:04 +0000 (17:29 +0100)
  http://git.kernel.org/linus/f44db678edcc6f4c2779ac43f63f0b9dfa28b724

Signed-off-by: Takahiro Yasui <tyasui@redhat.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

9 years agodm raid1: fail writes if errors are not handled and log fails
Mikulas Patocka [Tue, 16 Feb 2010 18:42:55 +0000]
dm raid1: fail writes if errors are not handled and log fails

If the mirror log fails when the handle_errors option was not selected
and there is no remaining valid mirror leg, writes return success even
though they weren't actually written to any device.  This patch
completes them with EIO instead.

This code path is taken:
do_writes:
bio_list_merge(&ms->failures, &sync);
do_failures:
if (!get_valid_mirror(ms)) (false)
else if (errors_handled(ms)) (false)
else bio_endio(bio, 0);

The logic in do_failures is based on presuming that the write was already
tried: if it succeeded at least on one leg (without handle_errors) it
is reported as success.

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=555197

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

9 years agodm log: userspace fix overhead_size calcuations
Jonathan Brassow [Tue, 16 Feb 2010 18:42:53 +0000]
dm log: userspace fix overhead_size calcuations

This patch fixes two bugs that revolve around the miscalculation and
misuse of the variable 'overhead_size'.  'overhead_size' is the size of
the various header structures used during communication.

The first bug is the use of 'sizeof' with the pointer of a structure
instead of the structure itself - resulting in the wrong size being
computed.  This is then used in a check to see if the payload
(data_size) would be to large for the preallocated structure.  Since the
bug produces a smaller value for the overhead, it was possible for the
structure to be breached.  (Although the current users of the code do
not currently send enough data to trigger this bug.)

The second bug is that the 'overhead_size' value is used to compute how
much of the preallocated space should be cleared before populating it
with fresh data.  This should have simply been 'sizeof(struct cn_msg)'
not overhead_size.  The fact that 'overhead_size' was computed
incorrectly made this problem "less bad" - leaving only a pointer's
worth of space at the end uncleared.  Thus, this bug was never producing
a bad result, but still needs to be fixed - especially now that the
value is computed correctly.

Cc: stable@kernel.org
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

9 years agodm snapshot: persistent annotate work_queue as on stack
Mike Snitzer [Tue, 16 Feb 2010 18:42:51 +0000]
dm snapshot: persistent annotate work_queue as on stack

chunk_io() declares its 'struct mdata_req' on the stack and then
initializes its 'struct work_struct' member.  Annotate the
initialization of this workqueue with INIT_WORK_ON_STACK to suppress a
debugobjects warning seen when CONFIG_DEBUG_OBJECTS_WORK is enabled.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

9 years agodm stripe: avoid divide by zero with invalid stripe count
Nikanth Karthikesan [Tue, 16 Feb 2010 18:42:47 +0000]
dm stripe: avoid divide by zero with invalid stripe count

If a table containing zero as stripe count is passed into stripe_ctr
the code attempts to divide by zero.

This patch changes DM_TABLE_LOAD to return -EINVAL if the stripe count
is zero.

We now get the following error messages:
  device-mapper: table: 253:0: striped: Invalid stripe count
  device-mapper: ioctl: error adding target to table

Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

9 years agox86: ELF_PLAT_INIT() shouldn't worry about TIF_IA32
Oleg Nesterov [Tue, 16 Feb 2010 14:24:01 +0000]
x86: ELF_PLAT_INIT() shouldn't worry about TIF_IA32

The 64-bit version of ELF_PLAT_INIT() clears TIF_IA32, but at this point
it has already been cleared by SET_PERSONALITY == set_personality_64bit.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>