13 years ago[ARM] 3869/1: AT91: NAND support for DK and KB9202 boards
Andrew Victor [Thu, 28 Sep 2006 09:27:00 +0000]
[ARM] 3869/1: AT91: NAND support for DK and KB9202 boards

This patch adds support for the NAND flash on the Atmel AT91RM9200-DK
and KwikByte KB920x boards.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3868/1: AT91 hardware header update
Andrew Victor [Wed, 27 Sep 2006 15:18:18 +0000]
[ARM] 3868/1: AT91 hardware header update

This patch adds the hardware register definitions for the TWI (I2C)
controller found on the AT91RM9200 and AT91SAM9xx processors.
It also defines the AIC Fast-Forcing registers added to the AT91SAM9's.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3867/1: AT91 GPIO update
Andrew Victor [Wed, 27 Sep 2006 12:23:00 +0000]
[ARM] 3867/1: AT91 GPIO update

This patch makes the AT91 gpio.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The GPIO controllers supported by a particular AT91
processor are defined in the processor-specific file and are registered
with gpio.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3866/1: AT91 clock update
Andrew Victor [Wed, 27 Sep 2006 09:50:59 +0000]
[ARM] 3866/1: AT91 clock update

This patch makes the AT91 clock.c support processor-generic (AT91RM9200
and AT91SAM9xxx).  The clocks supported by a particular AT91 processor
are defined in the processor-specific file and are registered with
clock.c at startup.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3865/1: AT91RM9200 header updates
Andrew Victor [Wed, 27 Sep 2006 08:44:11 +0000]
[ARM] 3865/1: AT91RM9200 header updates

This is more preparation for adding support for the new Atmel AT91SAM9
processors.

Changes include:
- Replace AT91_BASE_* with AT91RM9200_BASE_*
- Replace AT91_ID_* with AT91RM9200_ID_*
- ROM, SRAM and UHP address definitions moved to at91rm9200.h.
- The raw AT91_P[ABCD]_* definitions are now depreciated in favour of
the GPIO API.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series
David Anders [Tue, 26 Sep 2006 16:46:00 +0000]
[ARM] 3862/2: S3C2410 - add basic power management support for AML M5900 series

this patch registers the wakeup irq, sets a gpio pin to indicate the
status of system for suspend/resume operations, and adds the machine to
the supported machines for use with the simtec-pm

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] kthread: switch arch/arm/kernel/apm.c
Serge E. Hallyn [Mon, 7 Aug 2006 16:57:36 +0000]
[ARM] kthread: switch arch/arm/kernel/apm.c

Switch arch/arm/kernel/apm.c from using kernel_thread - whose export
is deprecated - to kthread.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] Off-by-one in arch/arm/common/icst*
Eric Sesterhenn [Tue, 26 Sep 2006 12:22:00 +0000]
[ARM] Off-by-one in arch/arm/common/icst*

hi,

a quick find -iname \*.[ch] | xargs grep "> ARRAY_SIZE(", revealed
these in the icst drivers.
If i == ARRAY_SIZE, we get past the idx2s array.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3864/1: Refactore sharpsl_pm
Dirk Opfer [Mon, 25 Sep 2006 21:51:02 +0000]
[ARM] 3864/1: Refactore sharpsl_pm

This patch adds another hook into sharpsl_pm to notify the machine
specific driver immediately after resume. This is needed to support the Sharp SL-6000 (Tosa).

Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3863/1: Add Locomo SPI Device
Dirk Opfer [Mon, 25 Sep 2006 21:41:47 +0000]
[ARM] 3863/1: Add Locomo SPI Device

The Locomo chip has a SPI interface which is used for SD/MMC cards (only collie).
This patch adds the definition for the SPI device inside the Locomo chip.

Signed-off-by: Dirk Opfer <Dirk@Opfer-Online.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3847/2: Convert LOMOMO to use struct device for GPIOs
Richard Purdie [Mon, 25 Sep 2006 19:11:48 +0000]
[ARM] 3847/2:  Convert LOMOMO to use struct device for GPIOs

Convert LOMOMO to use struct device * for GPIOs instead of struct
locomo_dev. This enables access to the GPIOs from code which is not
a locomo device itself (such as audio). Access for gpio 31 is removed
for error handling (no such hardware exists).

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/tmlind/linux-omap-upstream into...
Russell King [Wed, 27 Sep 2006 18:57:54 +0000]
Merge /linux/kernel/git/tmlind/linux-omap-upstream into devel

13 years ago[ARM] 3860/1: Versatile PCI config byte accesses
Paul Brook [Sun, 24 Sep 2006 15:54:40 +0000]
[ARM] 3860/1: Versatile PCI config byte accesses

The ARM Versatile board PCI config space read routines are broken for byte
accesses.  The access uses a byte read, so masking the bottom two bits of the
address is wrong.

I guess this is a cut/paste error from the the halfword code which uses
aligned word access+shift+mask.

Signed-off-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3859/1: Fix devicemaps_init() XIP_KERNEL odd 1MiB XIP_PHYS_ADDR translation...
George G. Davis [Fri, 22 Sep 2006 17:36:38 +0000]
[ARM] 3859/1: Fix devicemaps_init() XIP_KERNEL odd 1MiB XIP_PHYS_ADDR translation error

The ARM XIP_KERNEL map created in devicemaps_init() is wrong.
The map.pfn is rounded down to an even 1MiB section boundary
which results in va/pa translations errors when XIP_PHYS_ADDR
starts on an odd 1MiB boundary and this causes the kernel to
hang.  This patch fixes ARM XIP_KERNEL translation errors for
the odd 1MiB XIP_PHYS_ADDR boundary case.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3858/1: S3C2412: power management code
Ben Dooks [Fri, 22 Sep 2006 14:42:18 +0000]
[ARM] 3858/1: S3C2412: power management code

Add S3C2412 power management code, and move the
core register saving in from s3c2412.c

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3854/2: S3C2410 - add machine type for AML M5900 series (resubmitted)
David Anders [Thu, 21 Sep 2006 21:57:12 +0000]
[ARM] 3854/2: S3C2410 - add machine type for AML M5900 series (resubmitted)

Add the AML M5900 series to the list of supported machines in the
arch/arm/mach-s3c2410 directory. This ensures the core peripherals
are registered, and the timer source is configured. if selected in
the kernel config the framebuffer registers and mtd partition
information are set.  This version of the patch has corrected
formatting and removed the legacy procfs directory entry.

Signed-off-by: David Anders <danders@amltd.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years agoARM: OMAP: Remove common pm.c
Tony Lindgren [Mon, 25 Sep 2006 10:28:17 +0000]
ARM: OMAP: Remove common pm.c

There is now separate pm.c for OMAP1 and OMAP2.

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Sync clocks with linux-omap tree
Tony Lindgren [Mon, 25 Sep 2006 10:27:20 +0000]
ARM: OMAP: Sync clocks with linux-omap tree

Mostly clean up CONFIG_OMAP_RESET_CLOCKS. Also includes a
patch from Imre Deak to make McSPI clocks use id.

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years ago[PATCH] ARM: OMAP: Check gpio_fck not gpio_ick
Komal Shah [Mon, 25 Sep 2006 09:51:08 +0000]
[PATCH] ARM: OMAP: Check gpio_fck not gpio_ick

Check gpio_fck not gpio_ick.

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Sync DMA with linux-omap tree
Tony Lindgren [Mon, 25 Sep 2006 09:45:45 +0000]
ARM: OMAP: Sync DMA with linux-omap tree

This patch syncs OMAP DMA code with linux-omap tree.
Mostly allow changing DMA callback function and set
OMAP2 specific transfer mode.

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP2: Make sure peripherals can be accessed after clk_enable
Juha Yrjola [Mon, 25 Sep 2006 09:41:50 +0000]
ARM: OMAP2: Make sure peripherals can be accessed after clk_enable

Some peripherals seem to need additional delay until they
can actually be accessed after enabling their FCLK and ICLK.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP2: Keep both APLLs active during bootup
Juha Yrjola [Mon, 25 Sep 2006 09:41:49 +0000]
ARM: OMAP2: Keep both APLLs active during bootup

Enabling and disabling the 54 MHz and 96 MHz APLLs can happen
unnecessarily often during bootup. Make sure they're kept
enabled during init.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Add sanity check to clk_disable
Juha Yrjola [Mon, 25 Sep 2006 09:41:47 +0000]
ARM: OMAP: Add sanity check to clk_disable

BUG() if the clock use count is already zero.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: GPIO: IRQSTATUS2 workaround for retention state
Hiroshi DOYU [Mon, 25 Sep 2006 09:41:46 +0000]
ARM: OMAP: GPIO: IRQSTATUS2 workaround for retention state

In OMAP2420, an incoming GPIO interrupt always sets both GPIO_IRQSTATUS1
and GPIO_IRQSTATUS2, even if the relevant bit is disabled in
GPIO_IRQENABLE1/2 and DSP doesn't use GPIO at all. GPIO_IRQSTATUS1
is for MPU and GPIO_IRQSTATUS2 is for DSP. If IRQSTATUS is set, this
will prevent the system from going to idle state. This patch also clears
IRQSTATUS2 to avoid the above situation.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Fix typo for 24xx GPIO resume
Tony Lindgren [Mon, 25 Sep 2006 09:41:45 +0000]
ARM: OMAP: Fix typo for 24xx GPIO resume

Fix typo for 24xx GPIO resume

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: OMAP2 dmtimer power management support
Juha Yrjola [Mon, 25 Sep 2006 09:41:44 +0000]
ARM: OMAP: OMAP2 dmtimer power management support

GPT1 will be set into non-posted mode, and the wakeup register
is set for all timers.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Add support for forcing osc_ck on
Juha Yrjola [Mon, 25 Sep 2006 09:41:43 +0000]
ARM: OMAP: Add support for forcing osc_ck on

Some boards might use the oscillator clock for powering
external peripherals. Add support for making sure osc_ck
stays active even when trying to go to sleep.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Add enable/disable functions for dmtimer
Timo Teras [Mon, 25 Sep 2006 09:41:42 +0000]
ARM: OMAP: Add enable/disable functions for dmtimer

Add enable/disable functions which effectively control the GPT iclk and fclk.

Signed-off-by: Timo Teras <timo.teras@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Remove Remove superfluous/recursive locking for GPIO
David Brownell [Mon, 25 Sep 2006 09:41:41 +0000]
ARM: OMAP: Remove Remove superfluous/recursive locking for GPIO

Remove Remove superfluous/recursive locking for GPIO

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Fix spinlock recursion for dyntick
Tony Lindgren [Mon, 25 Sep 2006 09:41:40 +0000]
ARM: OMAP: Fix spinlock recursion for dyntick

Fix spinlock recursion for dyntick. Modified version based
on Imre Deak's earlier patch.

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Remove IVA IRQ bank
Komal Shah [Mon, 25 Sep 2006 09:41:39 +0000]
ARM: OMAP: Remove IVA IRQ bank

ARM11 can't access the IVA interrupt controller from
IVA slave port.

From Richard Woodruff:

"The 0x40000000 is an IVA-ARM7 local bus address.
The IVA-INTC is NOT accessible through the IVA-L3-Slave Port.
The current TRM does say this directly and indirectly in a few spots and
in figures."

Signed-off-by: Komal Shah <komal_shah802003@yahoo.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Reset GPIO irq state after free_irq()
Tony Lindgren [Mon, 25 Sep 2006 09:41:38 +0000]
ARM: OMAP: Reset GPIO irq state after free_irq()

This is needed to reset GPIO after free_irq().

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Add write memory barriers to OMAP2 clock code
Juha Yrjola [Mon, 25 Sep 2006 09:41:37 +0000]
ARM: OMAP: Add write memory barriers to OMAP2 clock code

After adjusting clock parameters, OMAP2 CPUs need a memory
barrier to make sure the changes go into effect immediately.
Otherwise bad things will happen if we try to access the
peripheral whose clock is just being enabled.

Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Fix OMAP2 clock.c typo
Samuel Ortiz [Mon, 25 Sep 2006 09:41:36 +0000]
ARM: OMAP: Fix OMAP2 clock.c typo

A forgotten parenthesis in clock.c caused the PLL stabilization loop
to not be executed correctly.

Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Use GPT iclk only when needed
Timo Teras [Mon, 25 Sep 2006 09:41:35 +0000]
ARM: OMAP: Use GPT iclk only when needed

This patch makes the OMAP2 dmtimers module using the interface
clocks only while the registers are accessed (except GPT1 which has
iclk enabled all the time).

Signed-off-by: Timo Teras <timo.teras@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: DMA source and destination addresses are unsigned
Tony Lindgren [Mon, 25 Sep 2006 09:41:34 +0000]
ARM: OMAP: DMA source and destination addresses are unsigned

Also export some omap24xx specific DMA functions.

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP2: Dynamic allocator for GPMC memory space
Imre Deak [Mon, 25 Sep 2006 09:41:33 +0000]
ARM: OMAP2: Dynamic allocator for GPMC memory space

Add support for assigning memory regions dynamically to peripherals
attached to GPMC interface. Platform specific code should now call
gpmc_cs_request to get a free GPMC memory region instead of using
a fixed address.

Make the H4 and Apollon platform initialization use the new API.

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Add some extra #defines for Amstrad Delta
Jonathan McDowell [Mon, 25 Sep 2006 09:41:31 +0000]
ARM: OMAP: Add some extra #defines for Amstrad Delta

This patch adds some further #defines regarding GPIOs and latch bits for
the Amstrad Delta; the drivers that use them will be submitted at a
later date but there's no reason not to have the information already
there and available for use.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Fix OMAP1 compilation after MPUIO check change
Jonathan McDowell [Mon, 25 Sep 2006 09:41:30 +0000]
ARM: OMAP: Fix OMAP1 compilation after MPUIO check change

The recent MPUIO range change fix breaks compilation if
CONFIG_ARCH_OMAP24XX isn't defined; it should be OMAP_MAX_GPIO_LINES not
MAX_GPIO_LINES I believe. This one liner fixes it.

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: mux: add config for 16xx SPI pins
Mark Howell [Mon, 25 Sep 2006 09:41:29 +0000]
ARM: OMAP: mux: add config for 16xx SPI pins

This patch adds pin mux info for the SPI master/slave interface on
OMAP16xx. Data from OMAP 1611/1612 TRM and errata. Works for me on my
1611/H2 with current git kernel.

Signed-off-by: Mark Howell <mhowell@northlink.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Sleep is prevented when no LCD is attached
Imre Deak [Mon, 25 Sep 2006 09:41:28 +0000]
ARM: OMAP: Sleep is prevented when no LCD is attached

We have to make sure that the LCD DMA external destination bit is
cleared by default, otherwise OMAP won't sleep.

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: GPIO: fix MPUIO check
Imre Deak [Mon, 25 Sep 2006 09:41:27 +0000]
ARM: OMAP: GPIO: fix MPUIO check

- MPUIO doesn't exist on OMAP2
- no error was returned for too big MPUIO numbers

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Remove sys_ck and sys_clkout from McBSP for 24xx
Tony Lindgren [Mon, 25 Sep 2006 09:41:26 +0000]
ARM: OMAP: Remove sys_ck and sys_clkout from McBSP for 24xx

McBSP does not need sys_ck or sys_clkout. If the devices connected
to McBSP need sys_clkout, they need to request it.

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Apollon MMC support
Kyungmin Park [Mon, 25 Sep 2006 09:41:25 +0000]
ARM: OMAP: Apollon MMC support

Apollon board MMC supports on OMAP2

TODO:
        We have to check MMC on H4

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: 2420 boot BUG(): failure to map SRAM
Kevin Hilman [Mon, 25 Sep 2006 09:41:24 +0000]
ARM: OMAP: 2420 boot BUG(): failure to map SRAM

ARM: OMAP: Fix SRAM static mapping for EMU devices.

Fix SRAM static mapping for EMU devices.

Signed-off-by: Kevin Hilman <khilman@deeprooted.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Added OMAP24xx camera IRQ definition
Samuel Ortiz [Mon, 25 Sep 2006 09:41:22 +0000]
ARM: OMAP: Added OMAP24xx camera IRQ definition

Signed-off-by: Samuel Ortiz <samuel.ortiz@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: timer32k: fix tick count calculation when reprogramming
Imre Deak [Mon, 25 Sep 2006 09:41:21 +0000]
ARM: OMAP: timer32k: fix tick count calculation when reprogramming

Reprogramming takes places before putting the CPU into idle mode if
the dynamic tick option is enabled. The timer is then set to expire
at the next pending timer event. Because some time has already passed
since the last reported jiffy we have to wait less than the time
specified in jiffies.

Also make sure we don't set a load value of 0 whose outcome is
unspecified according to the TRM.

Signed-off-by: Imre Deak <imre.deak@solidboot.com>
Signed-off-by: Juha Yrjola <juha.yrjola@solidboot.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years agoARM: OMAP: Avoid sleeping during arch_reset
Tony Lindgren [Mon, 25 Sep 2006 09:41:20 +0000]
ARM: OMAP: Avoid sleeping during arch_reset

If we call clk_get() from arch_reset we get ugly messages before
reboot.

Signed-off-by: Tony Lindgren <tony@atomide.com>

13 years ago[ARM] 3838/1: ARM: DCC debug console support for ARM11
Tony Lindgren [Wed, 20 Sep 2006 12:03:34 +0000]
[ARM] 3838/1: ARM: DCC debug console support for ARM11

Adds support for CONFIG_DEBUG_ICEDCC for ARM11.
Tested on ARM1136 (OMAP2420).

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] Cleanups for 4cc9bd2eaa1063c68341c1c00e66660adcfdf254
Russell King [Thu, 21 Sep 2006 16:00:08 +0000]
[ARM] Cleanups for 4cc9bd2eaa1063c68341c1c00e66660adcfdf254

- Document the meaning for OP_SCALAR, OP_SD and add OP_DD.
- Formatting cleanups
- Remove now redundant code for making compare instructions
  operate on scalar values.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3789/4: Fix VFP emulation to ignore VECITR for scalar instruction
Gen FUKATSU [Thu, 21 Sep 2006 13:08:24 +0000]
[ARM] 3789/4: Fix VFP emulation to ignore VECITR for scalar instruction

VECITR in Floating-Point Exception register indicates the number of
remaining short vector iterations after a potential exception was
detected.

In case of exception caused by scalar instructions, VECITR is NOT updated.
Therefore emulation for VFP must ignore VECITR field
and treat "veclen" as zero when recognizing scalar instructing.

Signed-off-by: Gen Fukatsu <fukatsu.gen@jp.panasonic.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3792/2: Fix description of ZBOOT_ROM_BSS
Dan Fandrich [Wed, 20 Sep 2006 22:28:51 +0000]
[ARM] 3792/2: Fix description of ZBOOT_ROM_BSS

The documentation for the ZBOOT_ROM_BSS config option describes it as
"The base address of 64KiB of read/write memory in the target for the
ROM-able zImage..." In actuality, it requires more than 100 KiB of
space in addition to enough space to hold the decompressed kernel.
This patch fixes the description in the Kconfig file.

Signed-off-by: Dan Fandrich <dfandrich@intrinsyc.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3853/1: Fix flush_ptrace_access() thinko for nonaliasing VIPT cache case
George G. Davis [Thu, 21 Sep 2006 02:57:04 +0000]
[ARM] 3853/1: Fix flush_ptrace_access() thinko for nonaliasing VIPT cache case

Fix thinko in the flush_ptrace_access() "if (expr)" for the ARM
VIPT non-aliasing cache case.  We only need to flush cache when
VM_EXEC is set in vma->vm_flags but "if (expr) always evaluates
to true on UP systems for the ARM VIPT non-aliasing cache case.

Signed-off-by: George G. Davis <gdavis@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3852/1: convert atomic bitops and __xchg over to raw_local_irq_{save,restore}
Lennert Buytenhek [Thu, 21 Sep 2006 02:35:20 +0000]
[ARM] 3852/1: convert atomic bitops and __xchg over to raw_local_irq_{save,restore}

Thomas Gleixner noticed that bitops.h should also use the raw_* irq
disable/enable variants, and __xchg needs them as well.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3851/1: iop3xx: add io-data glantank support
Lennert Buytenhek [Thu, 21 Sep 2006 01:46:03 +0000]
[ARM] 3851/1: iop3xx: add io-data glantank support

Add support for the IO-Data GLAN Tank, from Martin Michlmayr.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3850/1: iop3xx: add thecus n2100 support
Lennert Buytenhek [Thu, 21 Sep 2006 01:42:12 +0000]
[ARM] 3850/1: iop3xx: add thecus n2100 support

Add support for the Thecus n2100 (80219-based.)

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3849/1: fix get_unaligned() for gcc >= 4.1
Lennert Buytenhek [Thu, 21 Sep 2006 01:24:38 +0000]
[ARM] 3849/1: fix get_unaligned() for gcc >= 4.1

gcc 4.1's __typeof__ propagates 'const', which breaks get_unaligned().
Rewrite get_unaligned() not to use __typeof__.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3846/1: S3C24XX: Fix osiris memory map
Ben Dooks [Wed, 20 Sep 2006 20:57:06 +0000]
[ARM] 3846/1: S3C24XX: Fix osiris memory map

The memory mapping for the Osiris machine
are all off by one bit, and the base address
has been fixed for writing (bit25 is being
checked by the write, but not on read)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3844/1: S3C24XX: update s3c2410_defconfig
Ben Dooks [Wed, 20 Sep 2006 20:15:29 +0000]
[ARM] 3844/1: S3C24XX: update s3c2410_defconfig

New s3c2410_defconfig, updated 2.6.18

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3843/1: S3C24XX: Remove modfication lines from comments
Ben Dooks [Wed, 20 Sep 2006 19:54:54 +0000]
[ARM] 3843/1: S3C24XX: Remove modfication lines from comments

Remove the redundant Modification lines from
the top of the files in arch/arm/mach-s3c2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3842/1: S3C2412: Rename LCD device
Ben Dooks [Wed, 20 Sep 2006 19:46:09 +0000]
[ARM] 3842/1: S3C2412: Rename LCD device

The S3C2412 LCD controller is different enough
to warrant renaming the platform device.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3841/1: S3C2412: Add new IDCODE 32412003
Ben Dooks [Wed, 20 Sep 2006 19:39:15 +0000]
[ARM] 3841/1: S3C2412: Add new IDCODE 32412003

Add new code for the S3C2412

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3840/1: S3C2412: Add machine VSTMS
Ben Dooks [Wed, 20 Sep 2006 19:32:33 +0000]
[ARM] 3840/1: S3C2412: Add machine VSTMS

Add new machine VSTMS

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Gleixner <tglx@linuxtronix.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] Update mach-types
Russell King [Sat, 23 Sep 2006 19:48:24 +0000]
[ARM] Update mach-types

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3834/1: iop3xx: remove per-board defconfigs
Lennert Buytenhek [Mon, 18 Sep 2006 22:32:04 +0000]
[ARM] 3834/1: iop3xx: remove per-board defconfigs

Remove the old per-board defconfigs.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3833/1: iop3xx: add per-mach defconfigs
Lennert Buytenhek [Mon, 18 Sep 2006 22:31:31 +0000]
[ARM] 3833/1: iop3xx: add per-mach defconfigs

Add one defconfig for all iop32x boards and one defconfig for all
iop33x boards.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3832/1: iop3xx: coding style cleanup
Lennert Buytenhek [Mon, 18 Sep 2006 22:26:25 +0000]
[ARM] 3832/1: iop3xx: coding style cleanup

Since the iop32x code isn't iop321-specific, and the iop33x code isn't
iop331-specfic, do a s/iop321/iop32x/ and s/iop331/iop33x/, and tidy up
the code to conform to the coding style guidelines somewhat better.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3831/1: iop3xx: factor out common register defines
Lennert Buytenhek [Mon, 18 Sep 2006 22:25:33 +0000]
[ARM] 3831/1: iop3xx: factor out common register defines

Factor out the register defines for a number of other peripherals
common to the iop32x and iop33x.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3830/1: iop3xx: board support file cleanup
Lennert Buytenhek [Mon, 18 Sep 2006 22:24:52 +0000]
[ARM] 3830/1: iop3xx: board support file cleanup

Revamp the iop3xx board support: move the support code for each iop
board type into its own file, start using platform serial and platform
physmap flash devices, switch to a per-board time tick rate, and get
rid of the ARCH_EP80219 and STEPD config options by doing the relevant
checks at run time.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3829/1: iop3xx: optimise irq entry macros
Lennert Buytenhek [Mon, 18 Sep 2006 22:24:10 +0000]
[ARM] 3829/1: iop3xx: optimise irq entry macros

Squeeze three instructions out of the iop32x irq demuxer, and nine
out of the iop33x irq demuxer by using the hardware vector generator.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3828/1: iop3xx: remove useless loadsp macro
Lennert Buytenhek [Mon, 18 Sep 2006 22:23:38 +0000]
[ARM] 3828/1: iop3xx: remove useless loadsp macro

The iop33x loadsp hunk in arch/arm/boot/compressed/head.S serves
no purpose -- remove it.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3827/1: iop3xx: add common gpio module
Lennert Buytenhek [Mon, 18 Sep 2006 22:23:07 +0000]
[ARM] 3827/1: iop3xx: add common gpio module

Implement the gpio_line_{config,get,set} API for iop3xx.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3826/1: iop3xx: remove IOP3??_IRQ_OFS irq offset
Lennert Buytenhek [Mon, 18 Sep 2006 22:22:24 +0000]
[ARM] 3826/1: iop3xx: remove IOP3??_IRQ_OFS irq offset

Get rid of the unused IOP3??_IRQ_OFS irq offset define, start IRQ
numbering from zero.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3825/1: iop3xx: use cp6 enable/disable macros
Lennert Buytenhek [Mon, 18 Sep 2006 22:21:38 +0000]
[ARM] 3825/1: iop3xx: use cp6 enable/disable macros

Add CP6 enable/disable sequences to the timekeeping code and the IRQ
code.  As a result, we can't depend on CP6 access being enabled when
we enter get_irqnr_and_base anymore, so switch the latter over to
using memory-mapped accesses for now.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3824/1: iop3xx: add cp6 enable/disable macros
Lennert Buytenhek [Mon, 18 Sep 2006 22:20:55 +0000]
[ARM] 3824/1: iop3xx: add cp6 enable/disable macros

Add macros to enable and disable access to CP6.  On the iop3xx, enabling
CP6 access unfortunately also enables access to that coprocessor from
unprivileged code, so we need these macros to enable and disable access
to the coprocessor whenever we need to access it.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3823/1: iop3xx: switch iop32x/iop33x over to shared time code
Lennert Buytenhek [Mon, 18 Sep 2006 22:19:02 +0000]
[ARM] 3823/1: iop3xx: switch iop32x/iop33x over to shared time code

Switch the iop32x and iop33x code over to the common time implementation,
and remove the (nearly identical) iop32x and iop33x time implementations.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3822/1: iop3xx: rewrite time handling
Lennert Buytenhek [Mon, 18 Sep 2006 22:18:16 +0000]
[ARM] 3822/1: iop3xx: rewrite time handling

Merge and rewrite the iop32x/iop33x time code to do lost jiffy
tracking properly, and put the result in plat-iop/time.c.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci code
Lennert Buytenhek [Mon, 18 Sep 2006 22:17:36 +0000]
[ARM] 3821/1: iop3xx: switch iop32x/iop33x over to shared pci code

Switch the iop32x and iop33x code over to the common PCI implementation,
and remove the (nearly identical) iop32x and iop33x PCI implementations.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3820/1: iop3xx: factor out shared pci code
Lennert Buytenhek [Mon, 18 Sep 2006 22:16:23 +0000]
[ARM] 3820/1: iop3xx: factor out shared pci code

Merge the iop32x PCI code and iop33x PCI code into plat-iop/pci.c.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3819/1: iop3xx: factor out shared i2c code
Lennert Buytenhek [Mon, 18 Sep 2006 22:15:21 +0000]
[ARM] 3819/1: iop3xx: factor out shared i2c code

Move the i2c bits shared between iop32x and iop33x to plat-iop/i2c.c
and include/asm-arm/hardware/iop3xx.h.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x code
Lennert Buytenhek [Mon, 18 Sep 2006 22:12:53 +0000]
[ARM] 3818/1: iop3xx: introduce arch/arm/plat-iop for shared iop32x/iop33x code

Introduce the arch/arm/plat-iop directory, for code shared between the
iop32x and iop33x, and move the common memory map setup bits there.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33x
Lennert Buytenhek [Mon, 18 Sep 2006 22:10:26 +0000]
[ARM] 3817/1: iop3xx: split the iop3xx mach into iop32x and iop33x

Split the iop3xx mach type into iop32x and iop33x -- split the config
symbols, and move the code in the mach-iop3xx directory to the mach-iop32x
and mach-iop33x directories.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3816/1: iop3xx: rename config symbols
Lennert Buytenhek [Mon, 18 Sep 2006 22:02:25 +0000]
[ARM] 3816/1: iop3xx: rename config symbols

Rename CONFIG_ARCH_IOP321 to CONFIG_ARCH_IOP32X and
CONFIG_ARCH_IOP331 to CONFIG_ARCH_IOP33X.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3836/1: S3C24XX: Clear both EINT and INT status before sleep
Ben Dooks [Tue, 19 Sep 2006 09:04:18 +0000]
[ARM] 3836/1: S3C24XX: Clear both EINT and INT status before sleep

Clear both the EINT and INT status before
going to sleep, otherwise we may end up being
woken by something that was not set in our
wakeup map.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3806/2: S3C2412: Fix GPIO VA when only S3C2412 selected
Ben Dooks [Mon, 18 Sep 2006 09:19:06 +0000]
[ARM] 3806/2: S3C2412: Fix GPIO VA when only S3C2412 selected

The s3c24xx_va_gpio2 variable is only used
when the S3C2412 and another cpu-type is
being used in the kernel. This patch ensures
it is not set when it is not being used.

Fixes bug report by Thomas Gleixner.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3803/2: S3C24XX: PM split S3C2410 out of core pm
Ben Dooks [Tue, 19 Sep 2006 08:51:32 +0000]
[ARM] 3803/2: S3C24XX: PM split S3C2410 out of core pm

Remove the S3C2410 specific items out of the
core PM code. Add sysdev driver for all the
S3C24XX series that used the S3C2410 PM code.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3800/2: S3C2412: DMA channel mappings
Ben Dooks [Mon, 18 Sep 2006 22:52:03 +0000]
[ARM] 3800/2: S3C2412: DMA channel mappings

DMA channel mappings for the S3C2312

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3814/1: move 80200 dma_inv_range() erratum check out of line
Lennert Buytenhek [Sat, 16 Sep 2006 09:52:02 +0000]
[ARM] 3814/1: move 80200 dma_inv_range() erratum check out of line

On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't
clear the dirty bits, which means that if we invalidate a dirty line,
the dirty data can still be written back to memory later on.

To work around this, dma_inv_range() on these two processors is
implemented as dma_flush_range() (i.e. do a clean D-cache line before
doing the invalidate D-cache line.)  For this, we currently have a
processor ID check in xscale_dma_inv_range(), but a better solution
is to add a separate cache_fns and proc_info for A0/A1 80200.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3813/1: prevent >= 4G /dev/mem mmap()
Lennert Buytenhek [Sat, 16 Sep 2006 09:50:22 +0000]
[ARM] 3813/1: prevent >= 4G /dev/mem mmap()

Prevent userland from mapping in physical address regions >= 4G by
checking for that in valid_mmap_phys_addr_range().

Unfortunately, we cannot override valid_mmap_phys_addr_range() without
also overriding valid_phys_addr_range(), so copy drivers/char/mem.c's
version of valid_phys_addr_range() over to arch/arm/mm/mmap.c as well.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3811/1: ep93xx: add cirrus logic edb9312 support
Lennert Buytenhek [Sat, 16 Sep 2006 09:48:02 +0000]
[ARM] 3811/1: ep93xx: add cirrus logic edb9312 support

Add Cirrus Logic EDB9312 support.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3810/1: switch atomic helpers over to raw_local_irq_{save,restore}
Lennert Buytenhek [Sat, 16 Sep 2006 09:47:18 +0000]
[ARM] 3810/1: switch atomic helpers over to raw_local_irq_{save,restore}

Now that we have raw_* variants of local_irq_$FOO(), switch the atomic
helpers over to use those raw_* variants.  This is necessary when using
lockdep on pre-ARMv6 hardware, as lockdep uses atomic_t counters in the
trace_hardirqs_off() path.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3805/1: S3C2412: LCD register update
Ben Dooks [Fri, 15 Sep 2006 23:12:53 +0000]
[ARM] 3805/1: S3C2412: LCD register update

Add LCD register definitions for the S3C2412.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3804/1: S3C2442: LCD register update
Ben Dooks [Fri, 15 Sep 2006 23:11:32 +0000]
[ARM] 3804/1: S3C2442: LCD register update

Add LCD register definitions for the S3C2442.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3802/1: S3C24XX: PM tidy up cache flushing
Ben Dooks [Fri, 15 Sep 2006 23:04:23 +0000]
[ARM] 3802/1: S3C24XX: PM tidy up cache flushing

Change to using flush_cache_all() in pm.c and
also remove the need to flush the cache in the
PM code.

This changes the sleep.S code to have an entry
to store the registers for resume, and then a
second entry (after the caches are cleaned)
to do the suspend and resume.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3801/1: S3C24XX: Move IRQ PM out of pm.c
Ben Dooks [Fri, 15 Sep 2006 23:01:39 +0000]
[ARM] 3801/1: S3C24XX: Move IRQ PM out of pm.c

Seperate the IRQ power management code out of
the pm.c file, and add it to the relevant
system class devices.

Also make the suspend and resume code take
notice of the fact these registers can be
moved by compile time code.

Add fix from Ilya Yanok to also save the
INTSUBMSK over sleep.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3799/1: S3C2442: DMA channel mappings
Ben Dooks [Fri, 15 Sep 2006 22:46:20 +0000]
[ARM] 3799/1: S3C2442: DMA channel mappings

DMA channel mappings for the S3C2442

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3798/1: S3C2440: DMA channel mappings
Ben Dooks [Fri, 15 Sep 2006 22:45:17 +0000]
[ARM] 3798/1: S3C2440: DMA channel mappings

S3C2440 DMA channel mappings

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3797/1: S3C2410: DMA channel mappings
Ben Dooks [Fri, 15 Sep 2006 22:44:00 +0000]
[ARM] 3797/1: S3C2410: DMA channel mappings

DMA channel mappings for the S3C2410

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3796/1: S3C24XX: Add per-cpu DMA channel mapper
Ben Dooks [Fri, 15 Sep 2006 22:42:24 +0000]
[ARM] 3796/1: S3C24XX: Add per-cpu DMA channel mapper

Allow each CPU type in the S3C24XX range to
select the DMA channel mapping it supports.

We change the DMA registration to use an
virtual channel number that the DMA system
will allocate to a hardware channel at
request time.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

13 years ago[ARM] 3795/1: S3C24XX: add base AC97 registers
Ben Dooks [Fri, 15 Sep 2006 22:34:34 +0000]
[ARM] 3795/1: S3C24XX: add base AC97 registers

Add base definitions for the AC97 register
definitions.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>