10 years agoBlackfin: fix typo in isp1760 platform name
Michael Hennerich [Thu, 15 Oct 2009 10:37:33 +0000]
Blackfin: fix typo in isp1760 platform name

The driver changed from "isp1760-hcd" to "isp1760", so update resources
to match.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: unify duplicated power masks
Mike Frysinger [Thu, 15 Oct 2009 06:47:28 +0000]
Blackfin: unify duplicated power masks

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: pull in asm/dpmc.h for power defines
Mike Frysinger [Thu, 15 Oct 2009 17:12:05 +0000]
Blackfin: pull in asm/dpmc.h for power defines

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: H8606/ip0x: drop redundant SPI ctl_reg settings
Mike Frysinger [Thu, 15 Oct 2009 04:13:18 +0000]
Blackfin: H8606/ip0x: drop redundant SPI ctl_reg settings

No need to set MSTR in .ctl_reg as the Blackfin SPI bus driver does this
already for all parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: BF54x: punt useless "masks" for count/address MMRs
Mike Frysinger [Thu, 15 Oct 2009 03:57:04 +0000]
Blackfin: BF54x: punt useless "masks" for count/address MMRs

There's no point in having mask defines when the entire MMR value is a
count or address.  i.e. applying a mask of -1 is pointless.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: punt unused MXVR masks
Mike Frysinger [Thu, 15 Oct 2009 03:51:30 +0000]
Blackfin: punt unused MXVR masks

There are no MXVR device drivers, and if someday there is, we can put
these in a dedicated header rather than polluting the global namespace.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: punt OTP MMRs
Mike Frysinger [Thu, 15 Oct 2009 03:45:47 +0000]
Blackfin: punt OTP MMRs

People should not be accessing OTP MMRs directly.  They should instead go
through the Blackfin ROM helper functions.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: BF51x: dump non-existent SPI/NFC MMRs
Mike Frysinger [Thu, 15 Oct 2009 03:41:42 +0000]
Blackfin: BF51x: dump non-existent SPI/NFC MMRs

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: scrub unused watchdog mmr masks
Mike Frysinger [Thu, 15 Oct 2009 03:14:09 +0000]
Blackfin: scrub unused watchdog mmr masks

The watchdog code doesn't need these, and the other parts had these
punted, so keep the global namespace clean.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: scrub unused RTC masks
Mike Frysinger [Thu, 15 Oct 2009 03:10:38 +0000]
Blackfin: scrub unused RTC masks

The RTC driver code doesn't need these, and the other parts had these
punted, so keep the global namespace clean.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: unify BF547/8/9 headers
Mike Frysinger [Tue, 20 Oct 2009 17:30:58 +0000]
Blackfin: unify BF547/8/9 headers

No point in duplicating entire lists when we can simply tail into other
parts for most of the MMRs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: fix some BF547 header copy & paste typos
Mike Frysinger [Tue, 20 Oct 2009 18:31:46 +0000]
Blackfin: fix some BF547 header copy & paste typos

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: rename BF542 host dma defines
Mike Frysinger [Thu, 15 Oct 2009 04:22:21 +0000]
Blackfin: rename BF542 host dma defines

All the other BF54x parts had these defines renamed to avoid collision,
but it looks the BF542 was missed somehow.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: punt cache lock documentation
Michael Hennerich [Wed, 14 Oct 2009 13:43:53 +0000]
Blackfin: punt cache lock documentation

The cache lock code was unused and punted, so punt the documentation too.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: coreb: switched to unlocked_ioctl
Mike Frysinger [Tue, 13 Oct 2009 12:50:05 +0000]
Blackfin: coreb: switched to unlocked_ioctl

We don't need the BKL and now people will stop looking at this.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: convert DMA mutex to an atomic and drop redundant code
Mike Frysinger [Fri, 9 Oct 2009 22:18:12 +0000]
Blackfin: convert DMA mutex to an atomic and drop redundant code

The DMA channel status field was encoding redundant info wrt the DMA MMR
config register, and it was doing an incomplete job of checking all DMA
channels (some drivers write directly to the config register).  So drop
the tristate field in favor of a binary atomic field.  This simplifies
the code in general, removes the implicit need for sleeping, and forces
the suspend code to handle all channels properly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: update bfin_rotary defines
Michael Hennerich [Fri, 9 Oct 2009 07:37:03 +0000]
Blackfin: update bfin_rotary defines

The driver was moved during the merge process, so update the defines to
match the new location.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: push down asm/ includes and out of bfin-global.h
Mike Frysinger [Fri, 9 Oct 2009 07:34:00 +0000]
Blackfin: push down asm/ includes and out of bfin-global.h

Avoid including unnecessary headers all the time as well as circular
includes with core requirements.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: pull in firmware Kconfig
Mike Frysinger [Tue, 6 Oct 2009 04:49:07 +0000]
Blackfin: pull in firmware Kconfig

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: BF51x/BF52x: fill out bfin_clear_PPI_STATUS()
Mike Frysinger [Wed, 30 Sep 2009 01:21:13 +0000]
Blackfin: BF51x/BF52x: fill out bfin_clear_PPI_STATUS()

All the arches define a helper macro to make things easy for driver code.

Reported-by: Frank Van Hooft <frank@frankvh.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: bf537-stamp: need io.h for writeb() funcs
Barry Song [Tue, 29 Sep 2009 03:01:40 +0000]
Blackfin: bf537-stamp: need io.h for writeb() funcs

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: bf538: add support for extended GPIO banks
Michael Hennerich [Mon, 28 Sep 2009 12:23:41 +0000]
Blackfin: bf538: add support for extended GPIO banks

The GPIOs on ports C/D/E on the BF538/BF539 do not behave the same way as
the other ports on the part and the same way as all other Blackfin parts.
The MMRs are programmed slightly different and they cannot be used to
generate interrupts or wakeup a sleeping system.  Since these guys don't
fit into the existing code, create a simple gpiolib driver for them.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: add C define of trace_buffer_init()
Graf Yang [Mon, 28 Sep 2009 09:23:05 +0000]
Blackfin: add C define of trace_buffer_init()

Have the C API trace funcs match the assembly API trace funcs.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: cpufreq: use a constant latency
Michael Hennerich [Fri, 25 Sep 2009 09:03:21 +0000]
Blackfin: cpufreq: use a constant latency

PLL_LOCKCNT applies only to the PLL programming sequence which does not
apply to core and system clock dividers.  Writes to PLL_DIV to change the
CSEL/SSEL dividers take effect immediately.

There is still overhead in software in writing the new dividers, so just
use a value of 50us as this should be good enough.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: clean up isp1362 board resources
Mike Frysinger [Thu, 24 Sep 2009 05:44:36 +0000]
Blackfin: clean up isp1362 board resources

Drop the CONFIG_USB_ISP1362_BFIN_GPIO_IRQ Kconfig as it never made it into
mainline and it was a bad interface into the board resources.  For boards
that actually used this, replace it with an actual IRQ define.  For boards
that didn't, simply drop the resources.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: calculate on-chip lengths at link time rather than run time
Mike Frysinger [Wed, 23 Sep 2009 20:34:48 +0000]
Blackfin: calculate on-chip lengths at link time rather than run time

Since the link sizes never change at runtime, push the calculation out to
the linker script to save some useless calculation costs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: improve async bank access checking (for cross-banks & XIP)
Bernd Schmidt [Wed, 23 Sep 2009 16:47:16 +0000]
Blackfin: improve async bank access checking (for cross-banks & XIP)

The access_ok() function did not accept ranges within the async banks
which made it impossible to do XIP in flash.  Fixing that also showed
that the current bfin_mem_access_type() code did not work with accesses
that spanned async banks (like a file system).  So split out and fix the
async bank checks so that all these scenarios work as expected.

Signed-off-by: Bernd Schmidt <bernds_cb1@t-online.de>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: convert DMA code to a proper bitmap
Michael Hennerich [Wed, 23 Sep 2009 11:32:52 +0000]
Blackfin: convert DMA code to a proper bitmap

Rather than using our own data structures that basically boil down to a
bitmap, use the standard bitmap functions.

Reported-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: clean up bf537-lq035 board resources
Michael Hennerich [Tue, 22 Sep 2009 15:36:55 +0000]
Blackfin: clean up bf537-lq035 board resources

Now that the driver has been updated, convert the board resources to the
new i2c framework for managing slaves.

For boards that don't actually hook up to this hardware, simply drop the
resources altogether.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: add some bounds checking to peripheral_request
Barry Song [Wed, 16 Sep 2009 04:36:29 +0000]
Blackfin: add some bounds checking to peripheral_request

The requested peripheral is turned into an index into some state arrays,
so make sure the calculated index doesn't exceed the index.  This occurs
when using bogus pin values or the define headers are screwed up.  Now
we'll notice right away that something needs fixing instead of trying to
track down random memory corruption.

Signed-off-by: Barry Song <barry.song@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: use common code for cycle->nanosecond conversion
Yi Li [Tue, 15 Sep 2009 08:55:47 +0000]
Blackfin: use common code for cycle->nanosecond conversion

No point in redefining things that common code already does for us.  Also
use CYC2NS_SCALE_FACTOR to better reflect reality and for better precision.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: unify sched_clock() handling between clock sources
Yi Li [Tue, 15 Sep 2009 06:50:51 +0000]
Blackfin: unify sched_clock() handling between clock sources

Currently sched_clock() is only defined when using CYCLES as a clock
source.  Declare sched_clock() in common code and mark it with notrace to
prevent invoking sched_clock() recursively (because ftrace uses
sched_clock() to record time).

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: fix gptimer0 clock source compile warning
Yi Li [Tue, 15 Sep 2009 02:08:50 +0000]
Blackfin: fix gptimer0 clock source compile warning

Some of the clocksource prototypes were updated, but the gptimer0 func was
missed in the process.  Not a big issue as the argument is ignored, but we
should fix the compile warning anyways.

Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: update defconfigs
Mike Frysinger [Tue, 23 Jun 2009 13:43:06 +0000]
Blackfin: update defconfigs

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Yi Li <yi.li@analog.com>
Signed-off-by: Harald Krapfenbauer <Harald.Krapfenbauer@bluetechnix.at>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoBlackfin: convert to generic checksum code
Mike Frysinger [Sat, 13 Jun 2009 11:42:58 +0000]
Blackfin: convert to generic checksum code

The Blackfin port only implemented an optimized version of the
csum_tcpudp_nofold function, so convert everything else to the new
generic code.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

10 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Mon, 14 Dec 2009 20:50:25 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Avoid IO in udf_clear_inode
  udf: Try harder when looking for VAT inode
  udf: Fix compilation with UDFFS_DEBUG enabled

10 years agoudf: Avoid IO in udf_clear_inode
Jan Kara [Thu, 3 Dec 2009 12:39:28 +0000]
udf: Avoid IO in udf_clear_inode

It is not very good to do IO in udf_clear_inode. First, VFS does not really
expect inode to become dirty there and thus we have to write it ourselves,
second, memory reclaim gets blocked waiting for IO when it does not really
expect it, third, the IO pattern (e.g. on umount) resulting from writes in
udf_clear_inode is bad and it slows down writing a lot.

The reason why UDF needed to do IO in udf_clear_inode is that UDF standard
mandates extent length to exactly match inode size. But when we allocate
extents to a file or directory, we don't really know what exactly the final
file size will be and thus temporarily set it to block boundary and later
truncate it to exact length in udf_clear_inode. Now, this is changed to
truncate to final file size in udf_release_file for regular files. For
directories and symlinks, we do the truncation at the moment when learn
what the final file size will be.

Signed-off-by: Jan Kara <jack@suse.cz>

10 years agoudf: Try harder when looking for VAT inode
Jan Kara [Mon, 30 Nov 2009 18:47:55 +0000]
udf: Try harder when looking for VAT inode

Some disks do not contain VAT inode in the last recorded block as required
by the standard but a few blocks earlier (or the number of recorded blocks
is wrong). So look for the VAT inode a bit before the end of the media.

Signed-off-by: Jan Kara <jack@suse.cz>

10 years agoudf: Fix compilation with UDFFS_DEBUG enabled
Jan Kara [Mon, 30 Nov 2009 18:47:10 +0000]
udf: Fix compilation with UDFFS_DEBUG enabled

Signed-off-by: Jan Kara <jack@suse.cz>

10 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 14 Dec 2009 20:36:46 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mce: Clean up thermal init by introducing intel_thermal_supported()
  x86, mce: Thermal monitoring depends on APIC being enabled
  x86: Gart: fix breakage due to IOMMU initialization cleanup
  x86: Move swiotlb initialization before dma32_free_bootmem
  x86: Fix build warning in arch/x86/mm/mmio-mod.c
  x86: Remove usedac in feature-removal-schedule.txt
  x86: Fix duplicated UV BAU interrupt vector
  nvram: Fix write beyond end condition; prove to gcc copy is safe
  mm: Adjust do_pages_stat() so gcc can see copy_from_user() is safe
  x86: Limit the number of processor bootup messages
  x86: Remove enabling x2apic message for every CPU
  doc: Add documentation for bootloader_{type,version}
  x86, msr: Add support for non-contiguous cpumasks
  x86: Use find_e820() instead of hard coded trampoline address
  x86, AMD: Fix stale cpuid4_info shared_map data in shared_cpu_map cpumasks

Trivial percpu-naming-introduced conflicts in arch/x86/kernel/cpu/intel_cacheinfo.c

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
Linus Torvalds [Mon, 14 Dec 2009 20:33:02 +0000]
Merge git://git./linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: CodingStyle fixes
  pcmcia: remove unused IRQ_FIRST_SHARED

10 years agoMerge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 14 Dec 2009 18:22:11 +0000]
Merge branch 'next-spi' of git://git.secretlab.ca/git/linux-2.6

* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: (23 commits)
  spi: fix probe/remove section markings
  Add OMAP spi100k driver
  spi-imx: don't access struct device directly but use dev_get_platdata
  spi-imx: Add mx25 support
  spi-imx: use positive logic to distinguish cpu variants
  spi-imx: correct check for platform_get_irq failing
  ARM: NUC900: Add spi driver support for nuc900
  spi: SuperH MSIOF SPI Master driver V2
  spi: fix spidev compilation failure when VERBOSE is defined
  spi/au1550_spi: fix setupxfer not to override cfg with zeros
  spi/mpc8xxx: don't use __exit_p to wrap plat_mpc8xxx_spi_remove
  spi/i.MX: fix broken error handling for gpio_request
  spi/i.mx: drain MXC SPI transfer buffer when probing device
  MAINTAINERS: add SPI co-maintainer.
  spi/xilinx_spi: fix incorrect casting
  spi/mpc52xx-spi: minor cleanups
  xilinx_spi: add a platform driver using the xilinx_spi common module.
  xilinx_spi: add support for the DS570 IP.
  xilinx_spi: Switch to iomem functions and support little endian.
  xilinx_spi: Split into of driver and generic part.
  ...

10 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Mon, 14 Dec 2009 18:13:22 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf sched: Fix build failure on sparc
  perf bench: Add "all" pseudo subsystem and "all" pseudo suite
  perf tools: Introduce perf_session class
  perf symbols: Ditch dso->find_symbol
  perf symbols: Allow lookups by symbol name too
  perf symbols: Add missing "Variables" entry to map_type__name
  perf symbols: Add support for 'variable' symtabs
  perf symbols: Introduce ELF counterparts to symbol_type__is_a
  perf symbols: Introduce symbol_type__is_a
  perf symbols: Rename kthreads to kmaps, using another abstraction for it
  perf tools: Allow building for ARM
  hw-breakpoints: Handle bad modify_user_hw_breakpoint off-case return value
  perf tools: Allow cross compiling
  tracing, slab: Fix no callsite ifndef CONFIG_KMEMTRACE
  tracing, slab: Define kmem_cache_alloc_notrace ifdef CONFIG_TRACING

Trivial conflict due to different fixes to modify_user_hw_breakpoint()
in include/linux/hw_breakpoint.h

10 years agoPCI: Global variable decls must match the defs in section attributes
David Howells [Mon, 14 Dec 2009 14:13:44 +0000]
PCI: Global variable decls must match the defs in section attributes

Global variable declarations must match the definitions in section attributes
as the compiler is at liberty to vary the method it uses to access a variable,
depending on the section it is in.

When building the FRV arch, I now see:

  drivers/built-in.o: In function `pci_apply_final_quirks':
  drivers/pci/quirks.c:2606: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
  drivers/pci/quirks.c:2623: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o
  drivers/pci/quirks.c:2630: relocation truncated to fit: R_FRV_GPREL12 against symbol `pci_dfl_cache_line_size' defined in .devinit.data section in drivers/built-in.o

because the declaration of pci_dfl_cache_line_size in linux/pci.h does not
match the definition in drivers/pci/pci.c.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoFRV: Fix no-hardware-breakpoint case
David Howells [Mon, 14 Dec 2009 14:03:27 +0000]
FRV: Fix no-hardware-breakpoint case

If there is no hardware breakpoint support, modify_user_hw_breakpoint()
tries to return a NULL pointer through as an 'int' return value:

  In file included from kernel/exit.c:53:
  include/linux/hw_breakpoint.h: In function 'modify_user_hw_breakpoint':
  include/linux/hw_breakpoint.h:96: warning: return makes integer from pointer without a cast

Return 0 instead.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Mon, 14 Dec 2009 18:04:04 +0000]
Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (46 commits)
  microblaze: Remove rt_sigsuspend wrapper
  microblaze: nommu: Don't clobber R11 on syscalls
  microblaze: Remove show_tmem function
  microblaze: Support for WB cache
  microblaze: Add PVR for Microblaze v7.30.a
  microblaze: Remove ancient and fake microblaze version from cpu_ver table
  microblaze: Remove panic_timeout init value
  microblaze: Do not count system calls in default
  microblaze: Enable DTC compilation
  microblaze: Core oprofile configs and hooks
  microblaze: Fix level interrupt ACKing
  microblaze: Enable futimesat syscall
  microblaze: Checking DTS against PVR for write-back cache
  microblaze: Remove duplicity from pgalloc.h
  microblaze: Futex support
  microblaze: Adding dev_arch_data functions
  microblaze: Fix the heartbeat gpio to be more robust
  microblaze: Simple __copy_tofrom_user for noMMU
  microblaze: Export memory_start for modules
  microblaze: Use lowest-common-denominator default CPU settings
  ...

10 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Mon, 14 Dec 2009 18:03:36 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md: (27 commits)
  md: add 'recovery_start' per-device sysfs attribute
  md: rcu_read_lock() walk of mddev->disks in md_do_sync()
  md: integrate spares into array at earliest opportunity.
  md: move compat_ioctl handling into md.c
  md: revise Kconfig help for MD_MULTIPATH
  md: add MODULE_DESCRIPTION for all md related modules.
  raid: improve MD/raid10 handling of correctable read errors.
  md/raid10: print more useful messages on device failure.
  md/bitmap: update dirty flag when bitmap bits are explicitly set.
  md: Support write-intent bitmaps with externally managed metadata.
  md/bitmap: move setting of daemon_lastrun out of bitmap_read_sb
  md: support updating bitmap parameters via sysfs.
  md: factor out parsing of fixed-point numbers
  md: support bitmap offset appropriate for external-metadata arrays.
  md: remove needless setting of thread->timeout in raid10_quiesce
  md: change daemon_sleep to be in 'jiffies' rather than 'seconds'.
  md: move offset, daemon_sleep and chunksize out of bitmap structure
  md: collect bitmap-specific fields into one structure.
  md/raid1: add takeover support for raid5->raid1
  md: add honouring of suspend_{lo,hi} to raid1.
  ...

10 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Mon, 14 Dec 2009 18:02:35 +0000]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (58 commits)
  mfd: Add twl6030 regulator subdevices
  regulator: Add support for twl6030 regulators
  rtc: Add twl6030 RTC support
  mfd: Add support for twl6030 irq framework
  mfd: Rename twl4030_ routines in twl-regulator.c
  mfd: Rename twl4030_ routines in rtc-twl.c
  mfd: Rename all twl4030_i2c*
  mfd: Rename twl4030* driver files to enable re-use
  mfd: Clarify twl4030 return value for read and write
  mfd: Add all twl4030 regulators to the twl4030 mfd driver
  mfd: Don't set mc13783 ADREFMODE for touch conversions
  mfd: Remove ezx-pcap defines for custom led gpio encoding
  mfd: Near complete mc13783 rewrite
  mfd: Remove build time warning for WM835x register default tables
  mfd: Force I2C to be built in when building WM831x
  mfd: Don't allow wm831x to be built as a module
  mfd: Fix incorrect error check for wm8350-core
  mfd: Fix twl4030 warning
  gpiolib: Implement gpio_to_irq() for wm831x
  mfd: Remove default selection of AB4500
  ...

10 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 14 Dec 2009 18:01:15 +0000]
Merge branch 'devel' of /home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: fix lh7a40x build
  ARM: fix sa1100 build
  ARM: fix clps711x, footbridge, integrator, ixp2000, ixp2300 and s3c build bug
  ARM: VFP: fix vfp thread init bug and document vfp notifier entry conditions
  ARM: pxa: fix now incorrect reference of skt->irq by using skt->socket.pci_irq
  [ARM] pxa/zeus: default configuration for Arcom Zeus SBC.
  [ARM] pxa/zeus: make Viper pcmcia support more generic to support Zeus
  [ARM] pxa/zeus: basic support for Arcom Zeus SBC
  [ARM] pxa/em-x270: fix usb hub power up/reset sequence
  PCMCIA: fix pxa2xx_lubbock modular build error
  ARM: RealView: Fix typo in the RealView/PBX Kconfig entry
  ARM: Do not allow the probing of the local timer
  ARM: Add an earlyprintk debug console

10 years agoMerge git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Mon, 14 Dec 2009 18:00:24 +0000]
Merge git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* git://git.linux-nfs.org/projects/trondmy/nfs-2.6: (75 commits)
  NFS: Fix nfs_migrate_page()
  rpc: remove unneeded function parameter in gss_add_msg()
  nfs41: Invoke RECLAIM_COMPLETE on all new client ids
  SUNRPC: IS_ERR/PTR_ERR confusion
  NFSv41: Fix a potential state leakage when restarting nfs4_close_prepare
  nfs41: Handle NFSv4.1 session errors in the delegation recall code
  nfs41: Retry delegation return if it failed with session error
  nfs41: Handle session errors during delegation return
  nfs41: Mark stateids in need of reclaim if state manager gets stale clientid
  NFS: Fix up the declaration of nfs4_restart_rpc when NFSv4 not configured
  nfs41: Don't clear DRAINING flag on NFS4ERR_STALE_CLIENTID
  nfs41: nfs41_setup_state_renewal
  NFSv41: More cleanups
  NFSv41: Fix up some bugs in the NFS4CLNT_SESSION_DRAINING code
  NFSv41: Clean up slot table management
  NFSv41: Fix nfs4_proc_create_session
  nfs41: Invoke RECLAIM_COMPLETE
  nfs41: RECLAIM_COMPLETE functionality
  nfs41: RECLAIM_COMPLETE XDR functionality
  Cleanup some NFSv4 XDR decode comments
  ...

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Linus Torvalds [Mon, 14 Dec 2009 17:58:24 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tj/percpu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits)
  m68k: rename global variable vmalloc_end to m68k_vmalloc_end
  percpu: add missing per_cpu_ptr_to_phys() definition for UP
  percpu: Fix kdump failure if booted with percpu_alloc=page
  percpu: make misc percpu symbols unique
  percpu: make percpu symbols in ia64 unique
  percpu: make percpu symbols in powerpc unique
  percpu: make percpu symbols in x86 unique
  percpu: make percpu symbols in xen unique
  percpu: make percpu symbols in cpufreq unique
  percpu: make percpu symbols in oprofile unique
  percpu: make percpu symbols in tracer unique
  percpu: make percpu symbols under kernel/ and mm/ unique
  percpu: remove some sparse warnings
  percpu: make alloc_percpu() handle array types
  vmalloc: fix use of non-existent percpu variable in put_cpu_var()
  this_cpu: Use this_cpu_xx in trace_functions_graph.c
  this_cpu: Use this_cpu_xx for ftrace
  this_cpu: Use this_cpu_xx in nmi handling
  this_cpu: Use this_cpu operations in RCU
  this_cpu: Use this_cpu ops for VM statistics
  ...

Fix up trivial (famous last words) global per-cpu naming conflicts in
arch/x86/kvm/svm.c
mm/slab.c

10 years agoDocumentation: rw_lock lessons learned
William Allen Simpson [Sun, 13 Dec 2009 20:12:46 +0000]
Documentation: rw_lock lessons learned

In recent months, two different network projects erroneously
strayed down the rw_lock path.  Update the Documentation
based upon comments by Eric Dumazet and Paul E. McKenney in
those threads.

Further updates await somebody else with more expertise.

Changes:
  - Merged with extensive content by Stephen Hemminger.
  - Fix one of the comments by Linus Torvalds.

Signed-off-by: William.Allen.Simpson@gmail.com
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agox86, mce: Clean up thermal init by introducing intel_thermal_supported()
Hidetoshi Seto [Mon, 14 Dec 2009 08:57:00 +0000]
x86, mce: Clean up thermal init by introducing intel_thermal_supported()

It looks better to have a common function. No change in functionality.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <4B25FDDC.407@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>

10 years agox86, mce: Thermal monitoring depends on APIC being enabled
Cyrill Gorcunov [Mon, 14 Dec 2009 08:56:34 +0000]
x86, mce: Thermal monitoring depends on APIC being enabled

Add check if APIC is not disabled since thermal
monitoring depends on it. As only apic gets disabled
we should not try to install "thermal monitor" vector,
print out that thermal monitoring is enabled and etc...

Note that "Intel Correct Machine Check Interrupts" already
has such a check.

Also I decided to not add cpu_has_apic check into
mcheck_intel_therm_init since even if it'll call apic_read on
disabled apic -- it's safe here and allow us to save a few code
bytes.

Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
LKML-Reference: <4B25FDC2.3020401@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf sched: Fix build failure on sparc
David Miller [Mon, 14 Dec 2009 07:56:22 +0000]
perf sched: Fix build failure on sparc

Here, tvec->tv_usec is "unsigned int" not "unsigned long".

Since the type is different on every platform, it's probably
best to just use long printf formats and cast.

Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20091213.235622.53363059.davem@davemloft.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86: Gart: fix breakage due to IOMMU initialization cleanup
Yinghai Lu [Mon, 14 Dec 2009 02:52:15 +0000]
x86: Gart: fix breakage due to IOMMU initialization cleanup

This fixes the following breakage of the commit
75f1cdf1dda92cae037ec848ae63690d91913eac:

- GART systems that don't AGP with broken BIOS and more than 4GB
  memory are forced to use swiotlb. They can allocate aperture by
  hand and use GART.

- GART systems without GAP must disable GART on shutdown.

- swiotlb usage is forced by the boot option,
  gart_iommu_hole_init() is not called, so we disable GART
  early_gart_iommu_check().

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
LKML-Reference: <1260759135-6450-3-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86: Move swiotlb initialization before dma32_free_bootmem
FUJITA Tomonori [Mon, 14 Dec 2009 02:52:14 +0000]
x86: Move swiotlb initialization before dma32_free_bootmem

The commit 75f1cdf1dda92cae037ec848ae63690d91913eac introduced a
bug that we initialize SWIOTLB right after dma32_free_bootmem so
we wrongly steal memory area allocated for GART with broken BIOS
earlier.

This moves swiotlb initialization before dma32_free_bootmem().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: yinghai@kernel.org
LKML-Reference: <1260759135-6450-2-git-send-email-fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86: Fix build warning in arch/x86/mm/mmio-mod.c
Joe Perches [Mon, 14 Dec 2009 07:24:03 +0000]
x86: Fix build warning in arch/x86/mm/mmio-mod.c

Stephen Rothwell reported these warnings:

 arch/x86/mm/mmio-mod.c: In function 'print_pte':
 arch/x86/mm/mmio-mod.c:100: warning: too many arguments for format
 arch/x86/mm/mmio-mod.c:106: warning: too many arguments for format

The 'fmt' was left out accidentally.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus <torvalds@linux-foundation.org>
LKML-Reference: <1260775443.18538.16.camel@Joe-Laptop.home>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agox86: Remove usedac in feature-removal-schedule.txt
FUJITA Tomonori [Mon, 14 Dec 2009 02:06:15 +0000]
x86: Remove usedac in feature-removal-schedule.txt

The reason of removal, "replaced by allowdac and no dac
combination" is incorrect. There is no way to do the same thing
with "allowdac" and "nodac" combination.

The usedac option enables us to stop via_no_dac() setting
forbid_dac to 1. That is, someone who uses VIA bridges can use
DAC with this option even if some of VIA bridges seem to be
broken about DAC.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: WANG Cong <amwang@redhat.com>
Cc: gcosta@redhat.com
LKML-Reference: <20091214104423X.fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agoperf bench: Add "all" pseudo subsystem and "all" pseudo suite
Hitoshi Mitake [Sun, 13 Dec 2009 08:01:59 +0000]
perf bench: Add "all" pseudo subsystem and "all" pseudo suite

This patch adds a new "all" pseudo subsystem and an "all" pseudo
suite. These are for testing all subsystem and its all suite, or
all suite of one subsystem.

(This patch also contains a few trivial comment fixes for
bench/* and output style fixes. I judged that there are no
necessity to make them into individual patch.)

Example of use:

| % ./perf bench sched all                      # Test all suites of sched subsystem
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
|      Total time: 0.414 [sec]
|
| # Running sched/pipe benchmark...
| # Extecuted 1000000 pipe operations between two tasks
|
|      Total time: 10.999 [sec]
|
|       10.999317 usecs/op
|           90914 ops/sec
|
| % ./perf bench all                            # Test all suites of all subsystems
| # Running sched/messaging benchmark...
| # 20 sender and receiver processes per group
| # 10 groups == 400 processes run
|
|      Total time: 0.420 [sec]
|
| # Running sched/pipe benchmark...
| # Extecuted 1000000 pipe operations between two tasks
|
|      Total time: 11.741 [sec]
|
|       11.741346 usecs/op
|           85169 ops/sec
|
| # Running mem/memcpy benchmark...
| # Copying 1MB Bytes from 0x7ff33e920010 to 0x7ff3401ae010 ...
|
|      808.407437 MB/Sec

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <1260691319-4683-1-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

10 years agomicroblaze: Remove rt_sigsuspend wrapper
Michal Simek [Fri, 11 Dec 2009 11:54:04 +0000]
microblaze: Remove rt_sigsuspend wrapper

Generic rt_sigsuspend syscalls doesn't need any asm wrapper.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: nommu: Don't clobber R11 on syscalls
steve@digidescorp.com [Wed, 9 Dec 2009 23:13:42 +0000]
microblaze: nommu: Don't clobber R11 on syscalls

The noMMU syscall trap has a bug that causes R11 to be zero on return to
userland. Remove the extra "save" of R11 responsible for the bug.

Remove reloading of mode indicator because r11 already contains it.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Remove show_tmem function
Michal Simek [Thu, 10 Dec 2009 11:06:03 +0000]
microblaze: Remove show_tmem function

show_tmem function do nothing that's why I removed it.
There is also cleaning of commented ancient code.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Support for WB cache
Michal Simek [Thu, 10 Dec 2009 10:43:57 +0000]
microblaze: Support for WB cache

Microblaze version 7.20.d is the first MB version which can be run
on MMU linux. Please do not used previous version because they contain
HW bug.
Based on WB support was necessary to redesign whole cache design.
Microblaze versions from 7.20.a don't need to disable IRQ and cache
before working with them that's why there are special structures for it.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Add PVR for Microblaze v7.30.a
Michal Simek [Tue, 8 Dec 2009 16:54:07 +0000]
microblaze: Add PVR for Microblaze v7.30.a

Microblaze v7.30.a will have 0x10 version string.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Remove ancient and fake microblaze version from cpu_ver table
Michal Simek [Tue, 8 Dec 2009 16:51:06 +0000]
microblaze: Remove ancient and fake microblaze version from cpu_ver table

We need to continue with next microblaze PVR version that's why
I have to remove that ancient version. These version strings not match
any versions. From Microblaze v5.00.a is possible to use this style.
I believe that none use ancients versions. If yes they will be just
labeled as unknown version.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Remove panic_timeout init value
Michal Simek [Tue, 8 Dec 2009 16:49:21 +0000]
microblaze: Remove panic_timeout init value

panic_timeout is in BSS section and it is cleared with BSS section.
This means that value is setup to 0.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Do not count system calls in default
Michal Simek [Mon, 7 Dec 2009 07:21:34 +0000]
microblaze: Do not count system calls in default

There is not necessary to count system calls that's why
I added DEBUG macro

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Enable DTC compilation
Michal Simek [Mon, 30 Nov 2009 08:26:09 +0000]
microblaze: Enable DTC compilation

For simpleImage format we need to compile DTC. There is still possibility
to compile only Linux kernel without DTB compiled-in.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Core oprofile configs and hooks
John Williams [Tue, 24 Nov 2009 10:27:54 +0000]
microblaze: Core oprofile configs and hooks

Microblaze uses timer interrupt mode. Microblaze don't have
any performance counter that's why we use just simple implementation.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Fix level interrupt ACKing
steve@digidescorp.com [Tue, 17 Nov 2009 14:43:39 +0000]
microblaze: Fix level interrupt ACKing

Level interrupts need to be ack'd in the unmask handler, as in powerpc.
Among other issues, this bug causes the system clock to appear to run at
double-speed.

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Enable futimesat syscall
Michal Simek [Mon, 19 Oct 2009 11:50:02 +0000]
microblaze: Enable futimesat syscall

Futimesat was disabled. LTP testing shows that MB has no
problem with this syscall.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Checking DTS against PVR for write-back cache
Michal Simek [Wed, 21 Oct 2009 10:29:46 +0000]
microblaze: Checking DTS against PVR for write-back cache

WB cache has special flag in PVR. There is added checking mechanism
for PVR and DTS.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Remove duplicity from pgalloc.h
Michal Simek [Mon, 23 Nov 2009 09:15:00 +0000]
microblaze: Remove duplicity from pgalloc.h

just file cleanup

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Futex support
Michal Simek [Mon, 19 Oct 2009 09:58:44 +0000]
microblaze: Futex support

Microblaze v7.20 provides new lwx, swx instructions which bring
possibility to implement lock rutines.

There are some tests in open posix thread LTP part but current
toolchain not support it.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Adding dev_arch_data functions
Michal Simek [Mon, 23 Nov 2009 09:07:51 +0000]
microblaze: Adding dev_arch_data functions

The functions, dev_arch_data_set_node and get_node are missing
and are needed by some device drivers such as I2C.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Fix the heartbeat gpio to be more robust
John Linn [Fri, 5 Jun 2009 17:36:31 +0000]
microblaze: Fix the heartbeat gpio to be more robust

The device tree handling for the gpio in the heart beat was not handling
the system when there was no gpio and it wasn't working with a newer version
of the gpio core which does not have the is-bidir property.

Signed-off-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Simple __copy_tofrom_user for noMMU
John Williams [Fri, 14 Aug 2009 02:06:46 +0000]
microblaze: Simple __copy_tofrom_user for noMMU

This is first patch which clear part of uaccess.h.
uaccess.h will be clear later.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Export memory_start for modules
Michal Simek [Thu, 23 Jul 2009 06:23:53 +0000]
microblaze: Export memory_start for modules

memory_start symbol is needed by kernel modules.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Use lowest-common-denominator default CPU settings
John Williams [Mon, 24 Aug 2009 03:52:33 +0000]
microblaze: Use lowest-common-denominator default CPU settings

This will ensure that kernels built with no custom CPU settings will still boot
OK on hardware that has additional CPU hardware instructions etc.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Update default generic DTS
Michal Simek [Fri, 21 Aug 2009 11:47:09 +0000]
microblaze: Update default generic DTS

It is generated with longer compatible list

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Enable asm optimization only for HW with barrel-shifter
Michal Simek [Mon, 26 Oct 2009 08:56:48 +0000]
microblaze: Enable asm optimization only for HW with barrel-shifter

Asm code uses barrel-shifter instruction that's why we have
to protect cases when HW don't have it.

Reported-by: John Linn <john.linn@xilinx.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Remove the buggy ALLOW_EDIT_AUTO config option
John Williams [Mon, 24 Aug 2009 03:52:32 +0000]
microblaze: Remove the buggy ALLOW_EDIT_AUTO config option

This was intended to allow manual override of CPU settings copied automatically
to Kconfig.auto, however it's problematic for several reasons, but mostly:

  * If the defconfig doesn't have ALLOW_EDIT_AUTO=y, then it's impossible for
    that defconfig to iverride the values in the kernel source tree.  This leads
    to very strange errors where the kernel is compiled with the wrong CPUFLAGS.

Next patch in the series will back out the default in Kconfig.auto to baseline
settings, so a kernel built with no default values will at least boot on any
hardware, just not make use of additional CPU features.

Signed-off-by: John Williams <john.williams@petalogix.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Move cache macro from cache.h to cacheflush.h
Michal Simek [Thu, 15 Oct 2009 13:18:13 +0000]
microblaze: Move cache macro from cache.h to cacheflush.h

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: support U-BOOT image format
Michal Simek [Wed, 14 Oct 2009 15:38:26 +0000]
microblaze: support U-BOOT image format

Two version are generated.
linux.bin.ub which is created from linux.bin file
and
simpleImage.<dts>.ub which is created from stripped simpleImage.<dts> file

Load address and entry point is for microblaze first instruction
which is CONFIG_KERNEL_BASE_ADDR variable.

There is possible for simpleImage format parse _start symbol too.

simpleImage.<dts> is still stripped elf file

I cleared simpleImage.<dts>.unstrip file because there are so big.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Ptrace notifying from signal code
Michal Simek [Thu, 15 Oct 2009 09:32:25 +0000]
microblaze: Ptrace notifying from signal code

After the signal frame is set up on the userspace stack, ptrace() should
be given an opportunity to single-step into the signal handler

FRV, Blackfin, mn10300 and UM. Worth to look at that patches.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Extend cpuinfo for support write-back caches
Michal Simek [Wed, 14 Oct 2009 09:12:50 +0000]
microblaze: Extend cpuinfo for support write-back caches

There is missing checking agains PVR but this is not important
for now. There are some missing checking too.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Fix cache_line_lenght
Michal Simek [Thu, 8 Oct 2009 11:06:42 +0000]
microblaze: Fix cache_line_lenght

We used cache_line as cache_line_lenght. For this reason
we did cache flushing 4 times longer than was necessary.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Detect new 7.20.d version
Michal Simek [Thu, 15 Oct 2009 11:34:31 +0000]
microblaze: Detect new 7.20.d version

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Support both levels for reset
Michal Simek [Thu, 29 Oct 2009 09:12:59 +0000]
microblaze: Support both levels for reset

Till this patch reset always perform writen to 1.
Now we can use negative logic and perform reset write to 0.

It is opposite level than is currently read from that pin

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Fix announce message for reset gpio
Michal Simek [Thu, 29 Oct 2009 07:58:15 +0000]
microblaze: Fix announce message for reset gpio

I had to change message for gpio-reset because I always
not to see it. Prefix RESET is big and visible.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Remove saving and restoring before calling signal code
Michal Simek [Fri, 13 Nov 2009 07:26:49 +0000]
microblaze: Remove saving and restoring before calling signal code

Saving is done in SAVE_STATE macros that's why another save discard
previous saved value.

This change has no effect to normal programs because they ends in any exception
and they are killed. On the other side has effect on debugging.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Fix pfn_valid() for noMMU
steve@digidescorp.com [Fri, 13 Nov 2009 22:08:29 +0000]
microblaze: Fix pfn_valid() for noMMU

Configuring DEBUG_SLAB causes a noMMU kernel to die during initialization
with an invalid virtual address panic in kfree_debugcheck().
The panic is due to an improper definition of pfn_valid().

Signed-off-by: Steven J. Magnani <steve@digidescorp.com>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: ftrace: Add dynamic function graph tracer
Michal Simek [Mon, 16 Nov 2009 09:34:15 +0000]
microblaze: ftrace: Add dynamic function graph tracer

This patch add support for dynamic function graph tracer.

There is one my expactation that I can do flush_icache after
all code modification. On microblaze is this safer than do
flush for every entry. For icache is used name flush but
correct should be invalidation - this will be fix in upcomming
new cache implementaion and WB support.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: ftrace: add function graph support
Michal Simek [Mon, 16 Nov 2009 09:32:10 +0000]
microblaze: ftrace: add function graph support

For more information look at Documentation/trace folder.

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: ftrace: Add dynamic trace support
Michal Simek [Thu, 10 Dec 2009 13:15:44 +0000]
microblaze: ftrace: Add dynamic trace support

With dynamic function tracer, by default, _mcount is defined as an
"empty" function, it returns directly without any more action. When
enabling it in user-space, it will jump to a real tracing
function(ftrace_caller), and do the real job for us.

Differ from the static function tracer, dynamic function tracer provides
two functions ftrace_make_call()/ftrace_make_nop() to enable/disable the
tracing of some indicated kernel functions(set_ftrace_filter).

In the kernel version, there is only one "_mcount" string for every
kernel function, so, we just need to match this one in mcount_regex of
scripts/recordmcount.pl.

For more information please look at code and Documentation/trace folder.

Steven ACK that scripts/recordmcount.pl part.

Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: ftrace: enable HAVE_FUNCTION_TRACE_MCOUNT_TEST
Michal Simek [Mon, 16 Nov 2009 08:55:08 +0000]
microblaze: ftrace: enable HAVE_FUNCTION_TRACE_MCOUNT_TEST

Implement MCOUNT_TEST in asm code - it is faster than use
generic code

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: ftrace: add static function tracer
Michal Simek [Mon, 16 Nov 2009 08:40:14 +0000]
microblaze: ftrace: add static function tracer

If -pg of gcc is enabled with CONFIG_FUNCTION_TRACER=y. a calling to
_mcount will be inserted into each kernel function. so, there is a
possibility to trace the kernel functions in _mcount.

This patch add the specific _mcount support for static function
tracing. by default, ftrace_trace_function is initialized as
ftrace_stub(an empty function), so, the default _mcount will introduce
very little overhead. after enabling ftrace in user-space, it will jump
to a real tracing function and do static function tracing for us.

Commit message from Wu Zhangjin <wuzhangjin@gmail.com>

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: Add TRACE_IRQFLAGS_SUPPORT
Michal Simek [Fri, 30 Oct 2009 11:26:53 +0000]
microblaze: Add TRACE_IRQFLAGS_SUPPORT

There are just two major changes
Renamed local_irq functions to raw_local_irq in irq.c.
Added TRACE_IRQFLAGS_SUPPORT to Kconfig.debug.

Look at Documentation/irqflags-tracing.txt

Signed-off-by: Michal Simek <monstr@monstr.eu>

10 years agomicroblaze: preliminary enabling for LATENCYTOP support in Kconfig
Michal Simek [Mon, 16 Nov 2009 08:09:47 +0000]
microblaze: preliminary enabling for LATENCYTOP support in Kconfig

Signed-off-by: Michal Simek <monstr@monstr.eu>