10 years ago[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c
Marek Vasut [Fri, 17 Jul 2009 10:50:43 +0000]
[ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c

and convert PXA-based devices to gpio_pwdown where possible.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: balloon3 (http://balloonboard.org/) base machine support
Jonathan McDowell [Sat, 4 Jul 2009 13:43:56 +0000]
[ARM] pxa: balloon3 (balloonboard.org/) base machine support

So, again against latest pxa-linux-2.6/devel, with the following
changes:

 * Move to __raw_readl/__raw_writel for FPGA/CPLD register access
 * Change Toppoly LCD config to be selectable at run time rather than
   compile time.
 * Remove currently unused irq device suspend/resume functions.
 * Strip out unnecessary/duplicated #includes.
 * Some code style cleanups.

Balloon3 (http://balloonboard.org/) base machine support

Signed-off-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: add defconfig for IskraTel XCEP board
Matej Kenda [Mon, 7 Sep 2009 06:14:29 +0000]
[ARM] pxa: add defconfig for IskraTel XCEP board

Signed-off-by: Matej Kenda <matej.kenda@i-tech.si>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: add support for the IskraTel XCEP board
Matej Kenda [Mon, 7 Sep 2009 06:08:34 +0000]
[ARM] pxa: add support for the IskraTel XCEP board

Added support for the Iskratel XCEP single board computer, embedded in
instruments used in particle accelerators.

The patch contains the platform specific code, Makefile and Kconfig
changes for platform arm-pxa.

Signed-off-by: Aleš Bardorfer <ales.bardorfer@i-tech.si>
Signed-off-by: Michael Abbott <michael.abbott@diamond.ac.uk>
Signed-off-by: Matej Kenda <matej.kenda@i-tech.si>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/treo680: move LCD power GPIO to proper place
Tomáš Čech [Thu, 3 Sep 2009 14:55:47 +0000]
[ARM] pxa/treo680: move LCD power GPIO to proper place

Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/treo680: pxamci simplify to use GPIO
walker@suse.cz [Mon, 31 Aug 2009 17:25:57 +0000]
[ARM] pxa/treo680: pxamci simplify to use GPIO

Signed-off-by: Tomáš Čech <sleep_walker@suse.cz>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/spitz: make use of GPIO based matrix keypad driver
Eric Miao [Mon, 27 Jul 2009 08:59:39 +0000]
[ARM] pxa/spitz: make use of GPIO based matrix keypad driver

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/corgi: make use of GPIO based matrix keypad driver
Eric Miao [Mon, 27 Jul 2009 08:58:50 +0000]
[ARM] pxa/corgi: make use of GPIO based matrix keypad driver

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/hx4700: use platform_lcd driver
Philipp Zabel [Fri, 7 Aug 2009 15:01:04 +0000]
[ARM] pxa/hx4700: use platform_lcd driver

Instead of directly registering an lcd_device, use the platform_lcd driver.
This fixes a broken build in case CONFIG_LCD_CLASS_DEVICE is not enabled.

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Cc: Ben Dooks <ben-linux-arm@fluff.org>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/palm: fix possibly uninitialized variable in PalmTC-pcmcia
Marek Vasut [Thu, 3 Sep 2009 02:40:03 +0000]
[ARM] pxa/palm: fix possibly uninitialized variable in PalmTC-pcmcia

This 'problem' actually cant cause a failure of the driver, but it's always
better to be correct.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: Palm Tungsten|C PCMCIA support
Marek Vasut [Thu, 16 Jul 2009 11:30:47 +0000]
[ARM] pxa: Palm Tungsten|C PCMCIA support

This patch adds support for PCMCIA socket found in Palm Tungsten|C.
There is Prism3 based WiFi card hardwired to that socket.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: Palm Tungsten|C initial support
Marek Vasut [Thu, 16 Jul 2009 11:26:48 +0000]
[ARM] pxa: Palm Tungsten|C initial support

This patch adds basic support for Palm Tungsten|C handheld.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/palm: Add NOR Flash support for PalmTX
Marek Vasut [Mon, 27 Jul 2009 00:07:41 +0000]
[ARM] pxa/palm: Add NOR Flash support for PalmTX

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/palm: add NAND Flash support for PalmTX
Marek Vasut [Sat, 18 Jul 2009 14:51:41 +0000]
[ARM] pxa/palm: add NAND Flash support for PalmTX

This patch adds support for NAND chip found in PalmTX handheld. Support
is implemented through the gen_nand driver.

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/palm: Add NOR flash support for PalmLD
Marek Vasut [Fri, 17 Jul 2009 17:46:58 +0000]
[ARM] pxa/palm: Add NOR flash support for PalmLD

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/palm: add detect_delay to mmc for PalmTX,T5,LD
Marek Vasut [Thu, 16 Jul 2009 17:38:41 +0000]
[ARM] pxa/palm: add detect_delay to mmc for PalmTX,T5,LD

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/cm-x270: add libertas device registration
Mike Rapoport [Mon, 3 Aug 2009 09:07:52 +0000]
[ARM] pxa/cm-x270: add libertas device registration

v2 changes:
- use gpio_to_irq instead of IRQ_GPIO
- check gpio_direction_output return value to be on the safe side :)

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/em-x270: add vcc_core regulator
Mike Rapoport [Sun, 26 Jul 2009 10:48:40 +0000]
[ARM] pxa/em-x270: add vcc_core regulator

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/em-x270: remove debug leftovers
Mike Rapoport [Sun, 26 Jul 2009 10:48:39 +0000]
[ARM] pxa/em-x270: remove debug leftovers

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/em-x270: convert em-x270 to soc-camera as platform-device
Guennadi Liakhovetski [Tue, 12 May 2009 16:12:29 +0000]
[ARM] pxa/em-x270: convert em-x270 to soc-camera as platform-device

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/mioa701: convert mioa701 to the new platform-device soc-camera interface
Guennadi Liakhovetski [Fri, 24 Apr 2009 16:40:27 +0000]
[ARM] pxa/mioa701: convert mioa701 to the new platform-device soc-camera interface

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-device
Guennadi Liakhovetski [Wed, 13 May 2009 09:33:43 +0000]
[ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-device

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/colibri: add UART MFP configuration for the PXA320 module
Alex Roman [Fri, 3 Jul 2009 06:58:59 +0000]
[ARM] pxa/colibri: add UART MFP configuration for the PXA320 module

This patch configures the MFP pads for UART1, UART2, UART3 for the
Toradex Colibri PXA320 module. Previously they were just not
configured resulting in just the first UART working because it was the
only one that was configured by the bootloader (Toradex EBOOT in our
case).

This patch is against vanilla 2.6.30 and has been tested with the
Toradex Orchid carrier board (all three UARTs were functional).

Signed-off-by: Alex Roman <alex.roman@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards
Daniel Mack [Wed, 17 Jun 2009 08:32:54 +0000]
[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards

NAND feature will be enabled when the appropriate config option is set.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/ezx: set IRQ_BOARD_END for EZX
Daniel Ribeiro [Tue, 23 Jun 2009 15:39:25 +0000]
[ARM] pxa/ezx: set IRQ_BOARD_END for EZX

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/littleton: update littleton to use the new gpio_card_detect for mmc
Eric Miao [Mon, 13 Jul 2009 14:57:56 +0000]
[ARM] pxa/littleton: update littleton to use the new gpio_card_detect for mmc

Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: factor pxamci gpio handling
Robert Jarzmik [Mon, 6 Jul 2009 20:16:42 +0000]
[ARM] pxa: factor pxamci gpio handling

Several boards use always the same pattern with pxamci :
request gpio, request irq for that gpio to detect MMC card
insertion, request gpio for read-only mode detection, etc
...

Now that pxamci provides platform_data to describe simple
gpio management of the MMC external controls, use it.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: rpurdie@rpsys.net
Cc: drwyrm@gmail.com
Cc: sakoman@gmail.com
Cc: marek.vasut@gmail.com
Cc: s.hauer@pengutronix.de
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxamci: add simple gpio controls
Robert Jarzmik [Tue, 23 Jun 2009 21:21:03 +0000]
[ARM] pxamci: add simple gpio controls

The MMC block needs 3 external datas to work :
 - is the MMC card put in "read-only mode" ?
 - is a MMC card inserted or removed ?
 - enable power towards the MMC card

Several platforms provide these controls through
gpios. Expand the platform_data to request and use these
gpios is set up by board code.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Pierre.Ossman <pierre@ossman.eu>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxafb: use resource_size() function
Daniel Mack [Mon, 22 Jun 2009 19:08:04 +0000]
[ARM] pxafb: use resource_size() function

Cleanup only, no function change.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/dma: add debugfs entries
Robert Jarzmik [Sat, 8 Aug 2009 21:07:22 +0000]
[ARM] pxa/dma: add debugfs entries

Add some debug information for PXA DMA :
 - descriptors queued
 - channels state
 - global state

--
Since V1: reverted to old register access (no more dma_readl() or dma_writel()).

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/dma: optimize irq handler loop
Robert Jarzmik [Sat, 8 Aug 2009 21:07:21 +0000]
[ARM] pxa/dma: optimize irq handler loop

Reduce loop for dma irq handler callbacks to the minimum
required.

Since V1: included suggestion from Nicolas Pitre to improve
even further the loop.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa/dma: cosmetic move of EXPORT_SYMBOL under their functions
Robert Jarzmik [Sat, 8 Aug 2009 21:07:20 +0000]
[ARM] pxa/dma: cosmetic move of EXPORT_SYMBOL under their functions

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: merge {zylonite,littleton}_defconfig into pxa3xx_defconfig
Haojian Zhuang [Wed, 1 Jul 2009 06:17:16 +0000]
[ARM] pxa: merge {zylonite,littleton}_defconfig into pxa3xx_defconfig

Merge zylonite_defconfig and littleton_defconfig into pxa3xx_defconfig.
Since they're similar platform and servicing for same SoC family.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: update dependancy of pxa i2c module
Haojian Zhuang [Fri, 4 Sep 2009 09:37:17 +0000]
[ARM] pxa: update dependancy of pxa i2c module

PXA I2C module is also used in Marvell PXA168 and PXA910 series.
Update the module dependancy of PXA I2C.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: rename GCU IRQ for consistency
Daniel Mack [Thu, 9 Jul 2009 17:04:50 +0000]
[ARM] pxa: rename GCU IRQ for consistency

For consistency reasons, rename IRQ_GRPHICS to IRQ_GCU.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: add device definition for graphics controller
Daniel Mack [Thu, 9 Jul 2009 17:04:49 +0000]
[ARM] pxa: add device definition for graphics controller

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: add clock definition for graphics controller
Daniel Mack [Thu, 9 Jul 2009 17:04:48 +0000]
[ARM] pxa: add clock definition for graphics controller

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling
Haojian Zhuang [Wed, 19 Aug 2009 11:49:31 +0000]
[ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: add more registers in interrupt controller
Haojian Zhuang [Wed, 19 Aug 2009 11:30:24 +0000]
[ARM] pxa: add more registers in interrupt controller

Add priority registers and new registers of pxa935.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: add cpu_is_pxa950() and Kconfig options
Haojian Zhuang [Wed, 26 Aug 2009 02:32:00 +0000]
[ARM] pxa: add cpu_is_pxa950() and Kconfig options

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: update cpu_is_xsc3() to include Marvell CPUID
Haojian Zhuang [Fri, 21 Aug 2009 08:10:41 +0000]
[ARM] pxa: update cpu_is_xsc3() to include Marvell CPUID

CPU id is changed in Marvell chip. So update the code in cpu_is_xsc3().

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: expand irq support for PXA93x and PXA950
Haojian Zhuang [Mon, 31 Aug 2009 09:23:44 +0000]
[ARM] pxa: expand irq support for PXA93x and PXA950

PXA93x/950 has additional 64 GPIOs, each is a secondary interrupt
source for IRQ_GPIO_2_x, extend PXA_GPIO_IRQ_{BASE,NUM}.

PXA93x/950 specific IRQ definitions are added as well.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: support mfp of pxa935
Haojian Zhuang [Wed, 17 Jun 2009 05:57:40 +0000]
[ARM] pxa: support mfp of pxa935

Add and initialize the mfp setting of pxa935 chip.

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: add MFP_PULL_FLOAT
Daniel Mack [Tue, 11 Aug 2009 12:39:09 +0000]
[ARM] pxa: add MFP_PULL_FLOAT

There is currently an uncovered case for MFP configuration on PXAs which
is selected by setting the PULL_SEL bit but none of the PULL{UP,DOWN}_EN
bits. This case is needed to explicitly let pins float, even if the
selected alternate function would default to a configuration with a pull
resistor enabled.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: remove duplicate mfp definition in mach
Haojian Zhuang [Mon, 31 Aug 2009 12:16:54 +0000]
[ARM] pxa: remove duplicate mfp definition in mach

Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years ago[ARM] pxa: remove left-over struct clk *other field from struct clk
Philipp Zabel [Fri, 7 Aug 2009 13:51:12 +0000]
[ARM] pxa: remove left-over struct clk *other field from struct clk

Its removal was omitted when all its uses were removed in 8c3abc7d...
"[ARM] pxa: convert to clkdev and match clocks by struct device where possible"

Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>

10 years agoLinux 2.6.31
Linus Torvalds [Wed, 9 Sep 2009 22:13:59 +0000]
Linux 2.6.31

10 years agoaoe: allocate unused request_queue for sysfs
Ed Cashin [Wed, 9 Sep 2009 12:10:18 +0000]
aoe: allocate unused request_queue for sysfs

Andy Whitcroft reported an oops in aoe triggered by use of an
incorrectly initialised request_queue object:

  [ 2645.959090] kobject '<NULL>' (ffff880059ca22c0): tried to add
an uninitialized object, something is seriously wrong.
  [ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu
  [ 2645.959107] Call Trace:
  [ 2645.959139] [<ffffffff8126ca2f>] kobject_add+0x5f/0x70
  [ 2645.959151] [<ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0
  [ 2645.959155] [<ffffffff8126043f>] add_disk+0x8f/0x160
  [ 2645.959161] [<ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe]

The request queue of an aoe device is not used but can be allocated in
code that does not sleep.

Bruno bisected this regression down to

  cd43e26f071524647e660706b784ebcbefbd2e44

  block: Expose stacked device queues in sysfs

"This seems to generate /sys/block/$device/queue and its contents for
 everyone who is using queues, not just for those queues that have a
 non-NULL queue->request_fn."

Addresses http://bugs.launchpad.net/bugs/410198
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942

Note that embedding a queue inside another object has always been
an illegal construct, since the queues are reference counted and
must persist until the last reference is dropped. So aoe was
always buggy in this respect (Jens).

Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Bruno Premont <bonbons@linux-vserver.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoi915: disable interrupts before tearing down GEM state
Linus Torvalds [Wed, 9 Sep 2009 00:09:24 +0000]
i915: disable interrupts before tearing down GEM state

Reinette Chatre reports a frozen system (with blinking keyboard LEDs)
when switching from graphics mode to the text console, or when
suspending (which does the same thing). With netconsole, the oops
turned out to be

BUG: unable to handle kernel NULL pointer dereference at 0000000000000084
IP: [<ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915]

and it's due to the i915_gem.c code doing drm_irq_uninstall() after
having done i915_gem_idle(). And the i915_gem_idle() path will do

  i915_gem_idle() ->
    i915_gem_cleanup_ringbuffer() ->
      i915_gem_cleanup_hws() ->
        dev_priv->hw_status_page = NULL;

but if an i915 interrupt comes in after this stage, it may want to
access that hw_status_page, and gets the above NULL pointer dereference.

And since the NULL pointer dereference happens from within an interrupt,
and with the screen still in graphics mode, the common end result is
simply a silently hung machine.

Fix it by simply uninstalling the irq handler before idling rather than
after. Fixes

    http://bugzilla.kernel.org/show_bug.cgi?id=13819

Reported-and-tested-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agodrm/i915: fix mask bits setting
Zhenyu Wang [Tue, 8 Sep 2009 06:52:25 +0000]
drm/i915: fix mask bits setting

eDP is exclusive connector too, and add missing crtc_mask
setting for TV.

This fixes

http://bugzilla.kernel.org/show_bug.cgi?id=14139

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Mon, 7 Sep 2009 18:42:25 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Mon, 7 Sep 2009 18:41:15 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  IMA: update ima_counts_put

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 7 Sep 2009 18:40:24 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  gianfar: Fix build.

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
Linus Torvalds [Mon, 7 Sep 2009 18:40:15 +0000]
Merge git://git./linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  pcmcia: add CNF-CDROM-ID for ide

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Mon, 7 Sep 2009 18:38:30 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
  agp/intel: support for new chip variant of IGDNG mobile
  drm/i915: Unref old_obj on get_fence_reg() error path
  drm/i915: increase default latency constant (v2 w/comment)

10 years agodrm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
Dave Airlie [Mon, 7 Sep 2009 05:26:19 +0000]
drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.

This adds some rv350+ register for LTE/GTE discard,
and enables the rv515 two sided stencil register.
It also disables the DEPTHXY_OFFSET register which
can be used to workaround the CS checker.
Moves rs690 to proper place in rs600 and uses correct
table on rs600.

Signed-off-by: Dave Airlie <airlied@redhat.com>

10 years agoIMA: update ima_counts_put
Mimi Zohar [Fri, 4 Sep 2009 17:08:46 +0000]
IMA: update ima_counts_put

- As ima_counts_put() may be called after the inode has been freed,
verify that the inode is not NULL, before dereferencing it.

- Maintain the IMA file counters in may_open() properly, decrementing
any counter increments on subsequent errors.

Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com
Signed-off-by: James Morris <jmorris@namei.org>

10 years agogianfar: Fix build.
David S. Miller [Sun, 6 Sep 2009 08:41:02 +0000]
gianfar: Fix build.

Reported by Michael Guntsche <mike@it-loops.com>

--------------------
Commit
38bddf04bcfe661fbdab94888c3b72c32f6873b3 gianfar: gfar_remove needs to call unregister_netdev()

breaks the build of the gianfar driver because "dev" is undefined in
this function. To quickly test rc9 I changed this to priv->ndev but I do
not know if this is the correct one.
--------------------

Signed-off-by: David S. Miller <davem@davemloft.net>

10 years agoLinux 2.6.31-rc9
Linus Torvalds [Sat, 5 Sep 2009 23:38:12 +0000]
Linux 2.6.31-rc9

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Sat, 5 Sep 2009 21:59:00 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: sbp2: fix freeing of unallocated memory
  firewire: ohci: fix Ricoh R5C832, video reception
  firewire: ohci: fix Agere FW643 and multiple cameras
  firewire: core: fix crash in iso resource management

10 years agopowerpc: Fix i8259 interrupt driver kernel crash on ML510
Roderick Colenbrander [Thu, 3 Sep 2009 15:57:23 +0000]
powerpc: Fix i8259 interrupt driver kernel crash on ML510

This patch fixes a null pointer exception caused by removal of
'ack()' for level interrupts in the Xilinx interrupt driver.  A recent
change to the xilinx interrupt controller removed the ack hook for
level irqs.

Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge git://git.infradead.org/~dwmw2/mtd-2.6.31
Linus Torvalds [Sat, 5 Sep 2009 21:57:04 +0000]
Merge git://git.infradead.org/~dwmw2/mtd-2.6.31

* git://git.infradead.org/~dwmw2/mtd-2.6.31:
  JFFS2: add missing verify buffer allocation/deallocation
  mtd: nftl: fix offset alignments
  mtd: nftl: write support is broken
  mtd: m25p80: fix null pointer dereference bug

10 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sat, 5 Sep 2009 21:56:13 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: Allow changing max_sectors_kb above the default 512

10 years agoMerge branch 'fix/oxygen' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai...
Linus Torvalds [Sat, 5 Sep 2009 21:55:30 +0000]
Merge branch 'fix/oxygen' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/oxygen' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  sound: oxygen: handle cards with missing EEPROM
  sound: oxygen: fix MCLK rate for 192 kHz playback

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 5 Sep 2009 21:52:41 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  tc: Fix unitialized kernel memory leak
  pkt_sched: Revert tasklet_hrtimer changes.
  net: sk_free() should be allowed right after sk_alloc()
  gianfar: gfar_remove needs to call unregister_netdev()
  ipw2200: firmware DMA loading rework

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Linus Torvalds [Sat, 5 Sep 2009 21:51:45 +0000]
Merge git://git./linux/kernel/git/herbert/crypto-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: skcipher - Fix skcipher_dequeue_givcrypt NULL test

10 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Sat, 5 Sep 2009 21:51:24 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Re-enable cpufreq suspend and resume code

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Sat, 5 Sep 2009 21:50:53 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] fix csum_ipv6_magic()
  [IA64] Fix warning in dma-mapping.c

10 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Sat, 5 Sep 2009 21:25:14 +0000]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: actually enable the swapext compat handler

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Sat, 5 Sep 2009 21:24:33 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix preempt count underflow in nilfs_btnode_prepare_change_key

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Linus Torvalds [Sat, 5 Sep 2009 21:22:00 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tj/percpu

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: don't assume existence of cpu0

10 years agoMerge branch 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg...
Linus Torvalds [Sat, 5 Sep 2009 20:57:53 +0000]
Merge branch 'slab/urgent' of git://git./linux/kernel/git/penberg/slab-2.6

* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm
Linus Torvalds [Sat, 5 Sep 2009 20:51:07 +0000]
Merge git://git./linux/kernel/git/agk/linux-2.6-dm

* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
  dm snapshot: fix on disk chunk size validation
  dm exception store: split set_chunk_size
  dm snapshot: fix header corruption race on invalidation
  dm snapshot: refactor zero_disk_area to use chunk_io
  dm log: userspace add luid to distinguish between concurrent log instances
  dm raid1: do not allow log_failure variable to unset after being set
  dm log: remove incorrect field from userspace table output
  dm log: fix userspace status output
  dm stripe: expose correct io hints
  dm table: add more context to terse warning messages
  dm table: fix queue_limit checking device iterator
  dm snapshot: implement iterate devices
  dm multipath: fix oops when request based io fails when no paths

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Sat, 5 Sep 2009 20:50:46 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI SR-IOV: correct broken resource alignment calculations

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Sat, 5 Sep 2009 20:49:06 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix bootup with mcount in some configs.
  sparc64: Kill spurious NMI watchdog triggers by increasing limit to 30 seconds.

10 years agoMerge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Sat, 5 Sep 2009 20:48:37 +0000]
Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf_counter/powerpc: Fix cache event codes for POWER7
  perf_counter: Fix /0 bug in swcounters
  perf_counters: Increase paranoia level

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sat, 5 Sep 2009 20:41:29 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: atkbd - add Compaq Presario R4000-series repeat quirk
  Input: i8042 - add Acer Aspire 5536 to the nomux list

10 years agoext2: fix unbalanced kmap()/kunmap()
Nicolas Pitre [Sat, 5 Sep 2009 04:25:37 +0000]
ext2: fix unbalanced kmap()/kunmap()

In ext2_rename(), dir_page is acquired through ext2_dotdot().  It is
then released through ext2_set_link() but only if old_dir != new_dir.
Failing that, the pkmap reference count is never decremented and the
page remains pinned forever.  Repeat that a couple times with highmem
pages and all pkmap slots get exhausted, and every further kmap() calls
end up stalling on the pkmap_map_wait queue at which point the whole
system comes to a halt.

Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec...
Linus Torvalds [Sat, 5 Sep 2009 20:38:37 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
  ocfs2: ocfs2_write_begin_nolock() should handle len=0
  ocfs2: invalidate dentry if its dentry_lock isn't initialized.

10 years agopty: don't limit the writes to 'pty_space()' inside 'pty_write()'
Linus Torvalds [Sat, 5 Sep 2009 20:27:10 +0000]
pty: don't limit the writes to 'pty_space()' inside 'pty_write()'

The whole write-room thing is something that is up to the _caller_ to
worry about, not the pty layer itself.  The total buffer space will
still be limited by the buffering routines themselves, so there is no
advantage or need in having pty_write() artificially limit the size
somehow.

And what happened was that the caller (the n_tty line discipline, in
this case) may have verified that there is room for 2 bytes to be
written (for NL -> CRNL expansion), and it used to then do those writes
as two single-byte writes.  And if the first byte written (CR) then
caused a new tty buffer to be allocated, pty_space() may have returned
zero when trying to write the second byte (LF), and then incorrectly
failed the write - leading to a lost newline character.

This should finally fix

http://bugzilla.kernel.org/show_bug.cgi?id=14015

Reported-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agon_tty: do O_ONLCR translation as a single write
Linus Torvalds [Sat, 5 Sep 2009 19:46:07 +0000]
n_tty: do O_ONLCR translation as a single write

When translating CR to CRNL in the n_tty line discipline, we did it as
two tty_put_char() calls.  Which works, but is stupid, and has caused
problems before too with bad interactions with the write_room() logic.
The generic USB serial driver had that problem, for example.

Now the pty layer had similar issues after being moved to the generic
tty buffering code (in commit d945cb9cce20ac7143c2de8d88b187f62db99bdc:
"pty: Rework the pty layer to use the normal buffering logic").

So stop doing the silly separate two writes, and do it as a single write
instead.  That's what the n_tty layer already does for the space
expansion of tabs (XTABS), and it means that we'll now always have just
a single write for the CRNL to match the single 'tty_write_room()' test,
which hopefully means that the next time somebody screws up buffering,
it won't cause weeks of debugging.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoexec: do not sleep in TASK_TRACED under ->cred_guard_mutex
Oleg Nesterov [Sat, 5 Sep 2009 18:17:13 +0000]
exec: do not sleep in TASK_TRACED under ->cred_guard_mutex

Tom Horsley reports that his debugger hangs when it tries to read
/proc/pid_of_tracee/maps, this happens since

"mm_for_maps: take ->cred_guard_mutex to fix the race with exec"
04b836cbf19e885f8366bccb2e4b0474346c02d

commit in 2.6.31.

But the root of the problem lies in the fact that do_execve() path calls
tracehook_report_exec() which can stop if the tracer sets PT_TRACE_EXEC.

The tracee must not sleep in TASK_TRACED holding this mutex.  Even if we
remove ->cred_guard_mutex from mm_for_maps() and proc_pid_attr_write(),
another task doing PTRACE_ATTACH should not hang until it is killed or the
tracee resumes.

With this patch do_execve() does not use ->cred_guard_mutex directly and
we do not hold it throughout, instead:

- introduce prepare_bprm_creds() helper, it locks the mutex
  and calls prepare_exec_creds() to initialize bprm->cred.

- install_exec_creds() drops the mutex after commit_creds(),
  and thus before tracehook_report_exec()->ptrace_stop().

  or, if exec fails,

  free_bprm() drops this mutex when bprm->cred != NULL which
  indicates install_exec_creds() was not called.

Reported-by: Tom Horsley <tom.horsley@att.net>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agopage-allocator: always change pageblock ownership when anti-fragmentation is disabled
Mel Gorman [Sat, 5 Sep 2009 18:17:11 +0000]
page-allocator: always change pageblock ownership when anti-fragmentation is disabled

On low-memory systems, anti-fragmentation gets disabled as fragmentation
cannot be avoided on a sufficiently large boundary to be worthwhile.  Once
disabled, there is a period of time when all the pageblocks are marked
MOVABLE and the expectation is that they get marked UNMOVABLE at each call
to __rmqueue_fallback().

However, when MAX_ORDER is large the pageblocks do not change ownership
because the normal criteria are not met.  This has the effect of
prematurely breaking up too many large contiguous blocks.  This is most
serious on NOMMU systems which depend on high-order allocations to boot.
This patch causes pageblocks to change ownership on every fallback when
anti-fragmentation is disabled.  This prevents the large blocks being
prematurely broken up.

This is a fix to commit 49255c619fbd482d704289b5eb2795f8e3b7ff2e [page
allocator: move check for disabled anti-fragmentation out of fastpath] and
the problem affects 2.6.31-rc8.

Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agonommu: fix error handling in do_mmap_pgoff()
David Howells [Sat, 5 Sep 2009 18:17:07 +0000]
nommu: fix error handling in do_mmap_pgoff()

Fix the error handling in do_mmap_pgoff().  If do_mmap_shared_file() or
do_mmap_private() fail, we jump to the error_put_region label at which
point we cann __put_nommu_region() on the region - but we haven't yet
added the region to the tree, and so __put_nommu_region() may BUG
because the region tree is empty or it may corrupt the region tree.

To get around this, we can afford to add the region to the region tree
before calling do_mmap_shared_file() or do_mmap_private() as we keep
nommu_region_sem write-locked, so no-one can race with us by seeing a
transient region.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoworkqueues: introduce __cancel_delayed_work()
Oleg Nesterov [Sat, 5 Sep 2009 18:17:06 +0000]
workqueues: introduce __cancel_delayed_work()

cancel_delayed_work() has to use del_timer_sync() to guarantee the timer
function is not running after return.  But most users doesn't actually
need this, and del_timer_sync() has problems: it is not useable from
interrupt, and it depends on every lock which could be taken from irq.

Introduce __cancel_delayed_work() which calls del_timer() instead.

The immediate reason for this patch is
http://bugzilla.kernel.org/show_bug.cgi?id=13757
but hopefully this helper makes sense anyway.

As for 13757 bug, actually we need requeue_delayed_work(), but its
semantics are not yet clear.

Merge this patch early to resolves cross-tree interdependencies between
input and infiniband.

Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agofirewire: sbp2: fix freeing of unallocated memory
Stefan Richter [Thu, 3 Sep 2009 21:07:35 +0000]
firewire: sbp2: fix freeing of unallocated memory

If a target writes invalid status (typically status of a command that
already timed out), firewire-sbp2 attempts to put away an ORB that
doesn't exist.  https://bugzilla.redhat.com/show_bug.cgi?id=519772

Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

10 years agofirewire: ohci: fix Ricoh R5C832, video reception
Stefan Richter [Fri, 28 Aug 2009 11:26:03 +0000]
firewire: ohci: fix Ricoh R5C832, video reception

In dual-buffer DMA mode, no video frames are ever received from R5C832
by libdc1394.  Fallback to packet-per-buffer DMA works reliably.
http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13393/focus=13476

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

10 years agofirewire: ohci: fix Agere FW643 and multiple cameras
Stefan Richter [Fri, 28 Aug 2009 11:25:15 +0000]
firewire: ohci: fix Agere FW643 and multiple cameras

An Agere FW643 OHCI 1.1 card works fine for video reception from one
camera but fails early if receiving from two cameras.  After a short
while, no IR IRQ events occur and the context control register does not
react anymore.  This happens regardless whether both IR DMA contexts are
dual-buffer or one is dual-buffer and the other packet-per-buffer.

This can be worked around by disabling dual buffer DMA mode entirely.
http://sourceforge.net/mailarchive/message.php?msg_name=4A7C0594.2020208%40gmail.com
(Reported by Samuel Audet.)

In another report (by Jonathan Cameron), an FW643 works OK with two
cameras in dual buffer mode.  Whether this is due to different chip
revisions or different usage patterns (different video formats) is not
yet clear.  However, as far as the current capabilities of
firewire-core's isochronous I/O interface are concerned, simply
switching off dual-buffer on non-working and working FW643s alike is not
a problem in practice.  We only need to revisit this issue if we are
going to enhance the interface, e.g. so that applications can explicitly
choose modes.

Reported-by: Samuel Audet <samuel.audet@gmail.com>
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

10 years agofirewire: core: fix crash in iso resource management
Stefan Richter [Sat, 5 Sep 2009 11:23:49 +0000]
firewire: core: fix crash in iso resource management

This fixes a regression due to post 2.6.30 commit "firewire: core: do
not DMA-map stack addresses" 6fdc03709433ccc2005f0f593ae9d9dd04f7b485.

As David Moore noted, a previously correct sizeof() expression became
wrong since the commit changed its argument from an array to a pointer.
This resulted in an oops in ohci_cancel_packet in the shared workqueue
thread's context when an isochronous resource was to be freed.

Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>

10 years agoocfs2: ocfs2_write_begin_nolock() should handle len=0
Sunil Mushran [Fri, 4 Sep 2009 18:12:01 +0000]
ocfs2: ocfs2_write_begin_nolock() should handle len=0

Bug introduced by mainline commit e7432675f8ca868a4af365759a8d4c3779a3d922
The bug causes ocfs2_write_begin_nolock() to oops when len=0.

Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>

10 years agodm snapshot: fix on disk chunk size validation
Mikulas Patocka [Fri, 4 Sep 2009 19:40:43 +0000]
dm snapshot: fix on disk chunk size validation

Fix some problems seen in the chunk size processing when activating a
pre-existing snapshot.

For a new snapshot, the chunk size can either be supplied by the creator
or a default value can be used.  For an existing snapshot, the
chunk size in the snapshot header on disk should always be used.

If someone attempts to load an existing snapshot and has the 'default
chunk size' option set, the kernel uses its default value even when it
is incorrect for the snapshot being loaded.  This patch ensures the
correct on-disk value is always used.

Secondly, when the code does use the chunk size stored on the disk it is
prudent to revalidate it, so the code can exit cleanly if it got
corrupted as happened in
https://bugzilla.redhat.com/show_bug.cgi?id=461506 .

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm exception store: split set_chunk_size
Mikulas Patocka [Fri, 4 Sep 2009 19:40:41 +0000]
dm exception store: split set_chunk_size

Break the function set_chunk_size to two functions in preparation for
the fix in the following patch.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm snapshot: fix header corruption race on invalidation
Mikulas Patocka [Fri, 4 Sep 2009 19:40:39 +0000]
dm snapshot: fix header corruption race on invalidation

If a persistent snapshot fills up, a race can corrupt the on-disk header
which causes a crash on any future attempt to activate the snapshot
(typically while booting).  This patch fixes the race.

When the snapshot overflows, __invalidate_snapshot is called, which calls
snapshot store method drop_snapshot. It goes to persistent_drop_snapshot that
calls write_header. write_header constructs the new header in the "area"
location.

Concurrently, an existing kcopyd job may finish, call copy_callback
and commit_exception method, that goes to persistent_commit_exception.
persistent_commit_exception doesn't do locking, relying on the fact that
callbacks are single-threaded, but it can race with snapshot invalidation and
overwrite the header that is just being written while the snapshot is being
invalidated.

The result of this race is a corrupted header being written that can
lead to a crash on further reactivation (if chunk_size is zero in the
corrupted header).

The fix is to use separate memory areas for each.

See the bug: https://bugzilla.redhat.com/show_bug.cgi?id=461506

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm snapshot: refactor zero_disk_area to use chunk_io
Mikulas Patocka [Fri, 4 Sep 2009 19:40:37 +0000]
dm snapshot: refactor zero_disk_area to use chunk_io

Refactor chunk_io to prepare for the fix in the following patch.

Pass an area pointer to chunk_io and simplify zero_disk_area to use
chunk_io.  No functional change.

Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm log: userspace add luid to distinguish between concurrent log instances
Jonathan Brassow [Fri, 4 Sep 2009 19:40:34 +0000]
dm log: userspace add luid to distinguish between concurrent log instances

Device-mapper userspace logs (like the clustered log) are
identified by a universally unique identifier (UUID).  This
identifier is used to associate requests from the kernel to
a specific log in userspace.  The UUID must be unique everywhere,
since multiple machines may use this identifier when communicating
about a particular log, as is the case for cluster logs.

Sometimes, device-mapper/LVM may re-use a UUID.  This is the
case during pvmoves, when moving from one segment of an LV
to another, or when resizing a mirror, etc.  In these cases,
a new log is created with the same UUID and loaded in the
"inactive" slot.  When a device-mapper "resume" is issued,
the "live" table is deactivated and the new "inactive" table
becomes "live".  (The "inactive" table can also be removed
via a device-mapper 'clear' command.)

The above two issues were colliding.  More than one log was being
created with the same UUID, and there was no way to distinguish
between them.  So, sometimes the wrong log would be swapped
out during the exchange.

The solution is to create a locally unique identifier,
'luid', to go along with the UUID.  This new identifier is used
to determine exactly which log is being referenced by the kernel
when the log exchange is made.  The identifier is not
universally safe, but it does not need to be, since
create/destroy/suspend/resume operations are bound to a specific
machine; and these are the operations that make up the exchange.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm raid1: do not allow log_failure variable to unset after being set
Jonathan Brassow [Fri, 4 Sep 2009 19:40:32 +0000]
dm raid1: do not allow log_failure variable to unset after being set

This patch fixes a bug which was triggering a case where the primary leg
could not be changed on failure even when the mirror was in-sync.

The case involves the failure of the primary device along with
the transient failure of the log device.  The problem is that
bios can be put on the 'failures' list (due to log failure)
before 'fail_mirror' is called due to the primary device failure.
Normally, this is fine, but if the log device failure is transient,
a subsequent iteration of the work thread, 'do_mirror', will
reset 'log_failure'.  The 'do_failures' function then resets
the 'in_sync' variable when processing bios on the failures list.
The 'in_sync' variable is what is used to determine if the
primary device can be switched in the event of a failure.  Since
this has been reset, the primary device is incorrectly assumed
to be not switchable.

The case has been seen in the cluster mirror context, where one
machine realizes the log device is dead before the other machines.
As the responsibilities of the server migrate from one node to
another (because the mirror is being reconfigured due to the failure),
the new server may think for a moment that the log device is fine -
thus resetting the 'log_failure' variable.

In any case, it is inappropiate for us to reset the 'log_failure'
variable.  The above bug simply illustrates that it can actually
hurt us.

Cc: stable@kernel.org
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm log: remove incorrect field from userspace table output
Jonathan Brassow [Fri, 4 Sep 2009 19:40:30 +0000]
dm log: remove incorrect field from userspace table output

The output of 'dmsetup table' includes an internal field that should not
be there.  This patch removes it.  To make the fix simpler, we first
reorder a constructor argument

The 'device size' argument is generated internally.  Currently it is
placed as the last space-separated word of the constructor string.
However, we need to use a version of the string without this word, so we
move it to the beginning instead so it is trivial to skip past it.

We keep a copy of the arguments passed to userspace for creating a log,
just in case we need to resend them.  These are the same arguments that
are desired in the STATUSTYPE_TABLE request, except for one.  When
creating the userspace log, the userspace daemon must know the size of
the mirror, so that is added to the arguments given in the constructor
table.  We were printing this extra argument out as well, which is a
mistake.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm log: fix userspace status output
Jonathan Brassow [Fri, 4 Sep 2009 19:40:28 +0000]
dm log: fix userspace status output

Fix 'dmsetup table' output.

There is a missing ' ' at the end of the string causing two
words to run together.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm stripe: expose correct io hints
Mike Snitzer [Fri, 4 Sep 2009 19:40:25 +0000]
dm stripe: expose correct io hints

Set sensible I/O hints for striped DM devices in the topology
infrastructure added for 2.6.31 for userspace tools to
obtain via sysfs.

Add .io_hints to 'struct target_type' to allow the I/O hints portion
(io_min and io_opt) of the 'struct queue_limits' to be set by each
target and implement this for dm-stripe.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

10 years agodm table: add more context to terse warning messages
Mike Snitzer [Fri, 4 Sep 2009 19:40:24 +0000]
dm table: add more context to terse warning messages

A couple of recent warning messages make it difficult for the reader to
determine exactly what is wrong.  This patch adds more information to
those messages.

The messages were added by these commits:
  5dea271b6d87bd1d79a59c1d5baac2596a841c37 ("dm table: pass correct dev area size
to device_area_is_valid")
  ea9df47cc92573b159ef3b4fda516c32cba9c4fd ("dm table: fix blk_stack_limits arg
to use bytes not sectors")

The patch also corrects references to logical_block_size in printk format
strings from %hu to %u.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>