9 years agonet: dev_add_pack() & __dev_remove_pack() changes
Eric Dumazet [Thu, 2 Sep 2010 03:53:46 +0000]
net: dev_add_pack() & __dev_remove_pack() changes

Add a small helper ptype_head() to get the head to manipulate

dev_add_pack() & __dev_remove_pack() can use a spinlock without
blocking BH, since softirq use RCU, and these functions are run from
process context only.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: Improve comments in include/linux/phy.h
Peter Meerwald [Thu, 2 Sep 2010 04:06:24 +0000]
net: Improve comments in include/linux/phy.h

Correct state range of PHY bus addresses (i.e. 0-31) in comment,
make spelling of PHY consistent in comments.

Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoipvs: use pkts for SCTP too
Julian Anastasov [Wed, 1 Sep 2010 22:19:14 +0000]
ipvs: use pkts for SCTP too

Use correctly the in_pkts packet counter also for SCTP

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: another last_rx round
Eric Dumazet [Thu, 2 Sep 2010 16:19:32 +0000]
net: another last_rx round

Kill last_rx use in l2tp and two net drivers

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostarfire: Temporary kludge to fix powerpc build.
David S. Miller [Thu, 2 Sep 2010 01:35:59 +0000]
starfire: Temporary kludge to fix powerpc build.

Add a dma_addr_t 64-bit case for powerpc with 64-bit phys addresses.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: update also tcp_output with regard to RFC 5681
Gerrit Renker [Wed, 1 Sep 2010 00:28:35 +0000]
tcp: update also tcp_output with regard to RFC 5681

Thanks to Ilpo Jarvinen, this updates also the initial window
setting for tcp_output with regard to RFC 5681.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: make rx_queue sysfs_ops const
stephen hemminger [Tue, 31 Aug 2010 12:14:13 +0000]
net: make rx_queue sysfs_ops const

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agopxa168_eth: remove duplicated #include
Huang Weiyi [Mon, 30 Aug 2010 13:06:20 +0000]
pxa168_eth: remove duplicated #include

Remove duplicated #include('s) in
  drivers/net/pxa168_eth.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: skbuff.c cleanup
Eric Dumazet [Wed, 1 Sep 2010 05:25:10 +0000]
net: skbuff.c cleanup

(skb->data - skb->head) can be changed by skb_headroom(skb)

Remove some uses of NET_SKBUFF_DATA_USES_OFFSET, using
(skb_end_pointer(skb) - skb->head) or
(skb_tail_pointer(skb) - skb->head) : compiler does the right thing,
and this is more readable for us ;)

(struct skb_shared_info *) casts in pskb_expand_head() to help memcpy()
to use aligned moves.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoskge: add GRO support
Eric Dumazet [Tue, 31 Aug 2010 18:25:32 +0000]
skge: add GRO support

- napi_gro_flush() is exported from net/core/dev.c, to avoid
  an irq_save/irq_restore in the packet receive path.
- use napi_gro_receive() instead of netif_receive_skb()
- use napi_gro_flush() before calling __napi_complete()
- turn on NETIF_F_GRO by default
- Tested on a Marvell 88E8001 Gigabit NIC

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodrivers/net/can/mscan/mpc5xxx_can.c: Add of_node_put to avoid memory leak
Julia Lawall [Tue, 31 Aug 2010 07:44:00 +0000]
drivers/net/can/mscan/mpc5xxx_can.c: Add of_node_put to avoid memory leak

Add a call to of_node_put in the error handling code following a call to
of_find_matching_node.

This patch also moves the existing call to of_node_put after the call to
iounmap in the error handling code, to make it possible to jump to
of_node_put without doing iounmap.  These appear to be disjoint operations,
so the ordering doesn't matter.

This patch furthermore changes the -ENODEV result in the error handling
code for of_find_matching_node to a return of 0, as found in the error
handling code for of_iomap, because the return type of the function is
unsigned.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E,E1,E2;
statement S;
@@

*x =
(of_find_node_by_path
|of_find_node_by_name
|of_find_node_by_phandle
|of_get_parent
|of_get_next_parent
|of_get_next_child
|of_find_compatible_node
|of_match_node
|of_find_node_by_type
|of_find_node_with_property
|of_find_matching_node
|of_parse_phandle
)(...);
...
if (x == NULL) S
<... when != x = E
*if (...) {
  ... when != of_node_put(x)
      when != if (...) { ... of_node_put(x); ... }
(
  return <+...x...+>;
|
*  return ...;
)
}
...>
(
E2 = x;
|
of_node_put(x);
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agons83820: Use helper to disable chip interrupts
Denis Kirjanov [Mon, 30 Aug 2010 21:19:15 +0000]
ns83820: Use helper to disable chip interrupts

Use helper routine to disable chip interrupts.

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: tunnels should use rcu_dereference
Eric Dumazet [Mon, 30 Aug 2010 11:07:25 +0000]
net: tunnels should use rcu_dereference

tunnel4_handlers, tunnel64_handlers, tunnel6_handlers and
tunnel46_handlers are protected by RCU, but we dont use appropriate rcu
primitives to scan them. rcu_lock() is already held by caller.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: Update version to 1.52.53-5
Yaniv Rosner [Wed, 1 Sep 2010 09:51:37 +0000]
bnx2x: Update version to 1.52.53-5

Update version to 1.52.53-5

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: Add BCM84823 to the supported PHYs
Yaniv Rosner [Wed, 1 Sep 2010 09:51:35 +0000]
bnx2x: Add BCM84823 to the supported PHYs

Add BCM84823 to the supported PHYs

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: Change BCM848xx LED configuration
Yaniv Rosner [Wed, 1 Sep 2010 09:51:33 +0000]
bnx2x: Change BCM848xx LED configuration

Change 848xx LED configuration according to the new microcode (Boards
were shipped with only with the new microcode)

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: Remove unneeded setting of XAUI low power to BCM8727
Yaniv Rosner [Wed, 1 Sep 2010 09:51:30 +0000]
bnx2x: Remove unneeded setting of XAUI low power to BCM8727

Remove unneeded setting of XAUI low power to BCM8727. This was required
only in older microcode which is not in the field.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: Change BCM848xx configuration according to IEEE
Yaniv Rosner [Wed, 1 Sep 2010 09:51:25 +0000]
bnx2x: Change BCM848xx configuration according to IEEE

Change BCM848xx behavior to fit IEEE such that setting 10Mb/100Mb will
use force speed, and setting 1Gb/10Gb will use auto-negotiation with the
specific speed advertised

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: Reset link before any new link settings
Yaniv Rosner [Wed, 1 Sep 2010 09:51:23 +0000]
bnx2x: Reset link before any new link settings

Reset link before any new link settings to avoid potential link issue
caused by previous link settings

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: Fix potential link issue In BCM8727 based boards
Yaniv Rosner [Wed, 1 Sep 2010 09:51:20 +0000]
bnx2x: Fix potential link issue In BCM8727 based boards

In BCM8727 based boards, setting default 10G link speed after link was
set to 1G may lead to link down issue. The problem was setting the right
value, but to the wrong registers

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: Fix potential link issue of BCM8073/BCM8727
Yaniv Rosner [Wed, 1 Sep 2010 09:51:17 +0000]
bnx2x: Fix potential link issue of BCM8073/BCM8727

Fix potential link issue caused by insufficient delay time during SPIROM
load of BCM8073/BCM8727

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: add cksum flag
Amit Kumar Salecha [Tue, 31 Aug 2010 17:17:53 +0000]
qlcnic: add cksum flag

o New CKSUM flag added by fw to notify cksum is verified.
o Update version to 5.0.9

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: mac vlan learning support
Amit Kumar Salecha [Tue, 31 Aug 2010 17:17:52 +0000]
qlcnic: mac vlan learning support

Hypervisor allows, two VM's interfaces to have same mac address.
These VM's interfaces get differentiate with Vlan tag.
This patch add support to learn and configure mac+vlan filter on device.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: support mac learning
Amit Kumar Salecha [Tue, 31 Aug 2010 17:17:51 +0000]
qlcnic: support mac learning

Device eswitch need to configure with VM's mac address.
Hypervisor doesn't provide any utility/callbacks to get VM's mac address.
Unicast mac address filter improves performance and also provide
packet loopback capability i.e communication between VM.

Above features is by default off, can be turned on with module parameter
'mac_learn'.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: fix mac override capability
Rajesh Borundia [Tue, 31 Aug 2010 17:17:50 +0000]
qlcnic: fix mac override capability

o Rename mac_learning to mac_override
o Added check in set_mac to return error if mac override is disabled.
o Disabling mac_override only supported for Non priviledged functions.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: fix panic while using eth_hdr
Rajesh Borundia [Tue, 31 Aug 2010 17:17:49 +0000]
qlcnic: fix panic while using eth_hdr

o skb->mac_header is not set, so machine panics while using function eth_hdr.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: fix mac anti spoof policy
Rajesh Borundia [Tue, 31 Aug 2010 17:17:48 +0000]
qlcnic: fix mac anti spoof policy

o Allow enabling/disabling mac anti spoof policy only for
  Non privilege functions.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: fix for setting default eswitch config
Rajesh Borundia [Tue, 31 Aug 2010 17:17:47 +0000]
qlcnic: fix for setting default eswitch config

o Default eswitch config was set, even before eswitch capabilty get detected.
As a result setting default config was getting fail.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: fix mac addr read
Rajesh Borundia [Tue, 31 Aug 2010 17:17:46 +0000]
qlcnic: fix mac addr read

o Mac addr was read from flash for every fw reset
for Non-priviledge function.It should be read only once.
o Remove unnecessary get_mac_addr callback

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: add api version in reg dump
Rajesh Borundia [Tue, 31 Aug 2010 17:17:45 +0000]
qlcnic: add api version in reg dump

o ethtool reg version bumped to 2

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: backout firmware initialization update
Sony Chacko [Tue, 31 Aug 2010 17:17:44 +0000]
qlcnic: backout firmware initialization update

o Backing out "firmware initialization update" changes, commit-id
  "d4066833bb1b35fefb1dd45eb2b10659d46bf151".
o fix heartbit spelling, it should be heartbeat

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostmmac: Fix another build warning.
David S. Miller [Wed, 1 Sep 2010 03:56:48 +0000]
stmmac: Fix another build warning.

drivers/net/stmmac/dwmac100_core.c: In function 'dwmac100_dump_mac_regs':
drivers/net/stmmac/dwmac100_core.c:47: warning: cast from pointer to integer of different size

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agogro: unexport tcp4_gro_receive and tcp4_gro_complete
Eric Dumazet [Tue, 31 Aug 2010 10:23:47 +0000]
gro: unexport tcp4_gro_receive and tcp4_gro_complete

tcp4_gro_receive() and tcp4_gro_complete() dont need to be exported.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: add a comment on netdev->last_rx
Eric Dumazet [Tue, 31 Aug 2010 07:40:16 +0000]
net: add a comment on netdev->last_rx

As some driver authors seem to reintroduce dev->last_rx use,
add a comment to strongly discourage this.

Since commit 6cf3f41e6c0 (bonding, net: Move last_rx update into bonding
recv logic), network drivers dont need to update last_rx themselves,
unless they use this field to implement a timeout.

Not updating last_rx helps not dirtying a cache line, improving
performance in SMP.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agopktgen: remove non used variable
Eric Dumazet [Tue, 31 Aug 2010 01:57:35 +0000]
pktgen: remove non used variable

remove non used variable "queue" in pg_cleanup

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agovlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receive
Jiri Pirko [Tue, 31 Aug 2010 04:58:18 +0000]
vlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receive

[patch net-next-2.6] vlan: Use vlan_dev_real_dev in vlan_hwaccel_do_receive

Use helper as in other places.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoPhonet: do not set POLLOUT in case of send buffer overflow
Rémi Denis-Courmont [Mon, 30 Aug 2010 12:57:05 +0000]
Phonet: do not set POLLOUT in case of send buffer overflow

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoPhonet: correct sendmsg() error code from sock_alloc_send_skb()
Rémi Denis-Courmont [Mon, 30 Aug 2010 12:57:04 +0000]
Phonet: correct sendmsg() error code from sock_alloc_send_skb()

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoPhonet: restore flow control credits when sending fails
Rémi Denis-Courmont [Mon, 30 Aug 2010 12:57:03 +0000]
Phonet: restore flow control credits when sending fails

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostmmac: Fix build warnings.
David S. Miller [Tue, 31 Aug 2010 04:55:17 +0000]
stmmac: Fix build warnings.

In file included from drivers/net/stmmac/stmmac_ethtool.c:30:
drivers/net/stmmac/stmmac.h:111: warning: 'struct platform_device' declared inside parameter list
drivers/net/stmmac/stmmac.h:111: warning: its scope is only this definition or declaration, which is probably not what you want
drivers/net/stmmac/stmmac_main.c: In function 'stmmac_dvr_probe':
drivers/net/stmmac/stmmac_main.c:1744: warning: cast from pointer to integer of different size
In file included from drivers/net/stmmac/stmmac_mdio.c:31:
drivers/net/stmmac/stmmac.h:111: warning: 'struct platform_device' declared inside parameter list
drivers/net/stmmac/stmmac.h:111: warning: its scope is only this definition or declaration, which is probably not what you want
drivers/net/stmmac/dwmac1000_core.c: In function 'dwmac1000_dump_regs':
drivers/net/stmmac/dwmac1000_core.c:56: warning: cast from pointer to integer of different size

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoipv6: struct xfrm6_tunnel in read_mostly section
Eric Dumazet [Mon, 30 Aug 2010 10:27:10 +0000]
ipv6: struct xfrm6_tunnel in read_mostly section

tunnel6_handlers chain being scanned for each incoming packet,
make sure it doesnt share an often dirtied cache line.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: struct xfrm_tunnel in read_mostly section
Eric Dumazet [Mon, 30 Aug 2010 07:04:14 +0000]
net: struct xfrm_tunnel in read_mostly section

tunnel4_handlers chain being scanned for each incoming packet,
make sure it doesnt share an often dirtied cache line.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet/m68k: Hydra Ethernet - print whole resource instead of start address
Geert Uytterhoeven [Sun, 29 Aug 2010 21:43:46 +0000]
net/m68k: Hydra Ethernet - print whole resource instead of start address

resource_size_t changed from `unsigned long' to `phys_addr_t`, which is either
`u32' or `u64'.
Print the whole resource to remove the cast and to make it future-proof.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoTCP: update initial windows according to RFC 5681
Gerrit Renker [Sun, 29 Aug 2010 19:27:34 +0000]
TCP: update initial windows according to RFC 5681

This updates the use of larger initial windows, as originally specified in
RFC 3390, to use the newer IW values specified in RFC 5681, section 3.1.

The changes made in RFC 5681 are:
 a) the setting now is more clearly specified in units of segments (as the
    comments  by John Heffner emphasized, this was not very clear in RFC 3390);
 b) for connections with 1095 < SMSS <= 2190 there is now a change:
    - RFC 3390 says that IW <= 4380,
    - RFC 5681 says that IW = 3 * SMSS <= 6570.

Since RFC 3390 is older and "only" proposed standard, whereas the newer RFC 5681
is already draft standard, it seems preferable to use the newer IW variant.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodccp ccid-3: use per-route RTO or TCP RTO as fallback
Gerrit Renker [Sun, 29 Aug 2010 19:23:14 +0000]
dccp ccid-3: use per-route RTO or TCP RTO as fallback

This makes RTAX_RTO_MIN also available to CCID-3, replacing the compile-time
RTO lower bound with a per-route tunable value.

The original Kconfig option solved the problem that a very low RTT (in the
order of HZ) can trigger too frequent and unnecessary reductions of the
sending rate.

This tunable does not affect the initial RTO value of 2 seconds specified in
RFC 5348, section 4.2 and Appendix B. But like the hardcoded Kconfig value,
it allows to adapt to network conditions.

The same effect as the original Kconfig option of 100ms is now achieved by

> ip route replace to unicast 192.168.0.0/24 rto_min 100j dev eth0

(assuming HZ=1000).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodccp ccid-2: Share TCP's minimum RTO code
Gerrit Renker [Sun, 29 Aug 2010 19:23:13 +0000]
dccp ccid-2: Share TCP's minimum RTO code

Using a fixed RTO_MIN of 0.2 seconds was found to cause problems for CCID-2
over 802.11g: at least once per session there was a spurious timeout. It
helped to then increase the the value of RTO_MIN over this link.

Since the problem is the same as in TCP, this patch makes the solution from
commit "05bb1fad1cde025a864a90cfeb98dcbefe78a44a"
       "[TCP]: Allow minimum RTO to be configurable via routing metrics."
available to DCCP.

This avoids reinventing the wheel, so that e.g. the following works in the
expected way now also for CCID-2:

> ip route change 10.0.0.2 rto_min 800 dev ath0

Luckily this useful rto_min function was recently moved to net/tcp.h,
which simplifies sharing code originating from TCP.

Documentation also updated (plus minor whitespace fixes).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp/dccp: Consolidate common code for RFC 3390 conversion
Gerrit Renker [Sun, 29 Aug 2010 19:23:12 +0000]
tcp/dccp: Consolidate common code for RFC 3390 conversion

This patch consolidates initial-window code common to TCP and CCID-2:
 * TCP uses RFC 3390 in a packet-oriented manner (tcp_input.c) and
 * CCID-2 uses RFC 3390 in packet-oriented manner (RFC 4341).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodccp ccid-2: Remove wrappers around sk_{reset,stop}_timer()
Gerrit Renker [Sun, 29 Aug 2010 19:23:11 +0000]
dccp ccid-2: Remove wrappers around sk_{reset,stop}_timer()

This removes the wrappers around the sk timer functions, since not much is
gained from using them: the BUG_ON in start_rto_timer will never trigger
since that function is called only if:

 * the RTO timer expires (rto_expire, and then timer_pending() is false);
 * in tx_packet_sent only if !timer_pending() (BUG_ON is redundant here);
 * previously in new_ack, after stopping the timer (timer_pending() false).

Removing the wrappers also clears the way for eventually replacing the
RTO timer with the icsk-retransmission-timer, as it is already part of the
DCCP socket.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodccp ccid-2: Use u32 timestamps uniformly
Gerrit Renker [Sun, 29 Aug 2010 19:23:10 +0000]
dccp ccid-2: Use u32 timestamps uniformly

Since CCID-2 is de facto a mini implementation of TCP, it makes sense to share
as much code as possible.

Hence this patch aligns CCID-2 timestamping with TCP timestamping.
This also halves the space consumption (on 64-bit systems).

The necessary include file <net/tcp.h> is already included by way of
net/dccp.h. Redundant includes have been removed.

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotcp: Add TCP_USER_TIMEOUT socket option.
Jerry Chu [Fri, 27 Aug 2010 19:13:28 +0000]
tcp: Add TCP_USER_TIMEOUT socket option.

This patch provides a "user timeout" support as described in RFC793. The
socket option is also needed for the the local half of RFC5482 "TCP User
Timeout Option".

TCP_USER_TIMEOUT is a TCP level socket option that takes an unsigned int,
when > 0, to specify the maximum amount of time in ms that transmitted
data may remain unacknowledged before TCP will forcefully close the
corresponding connection and return ETIMEDOUT to the application. If
0 is given, TCP will continue to use the system default.

Increasing the user timeouts allows a TCP connection to survive extended
periods without end-to-end connectivity. Decreasing the user timeouts
allows applications to "fail fast" if so desired. Otherwise it may take
upto 20 minutes with the current system defaults in a normal WAN
environment.

The socket option can be made during any state of a TCP connection, but
is only effective during the synchronized states of a connection
(ESTABLISHED, FIN-WAIT-1, FIN-WAIT-2, CLOSE-WAIT, CLOSING, or LAST-ACK).
Moreover, when used with the TCP keepalive (SO_KEEPALIVE) option,
TCP_USER_TIMEOUT will overtake keepalive to determine when to close a
connection due to keepalive failure.

The option does not change in anyway when TCP retransmits a packet, nor
when a keepalive probe will be sent.

This option, like many others, will be inherited by an acceptor from its
listener.

Signed-off-by: H.K. Jerry Chu <hkchu@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: fix datapath typo
Simon Horman [Mon, 30 Aug 2010 04:57:55 +0000]
net: fix datapath typo

Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoIPVS: include net/ip6_checksum.h for csum_ipv6_magic
Stephen Rothwell [Sun, 29 Aug 2010 17:04:53 +0000]
IPVS: include net/ip6_checksum.h for csum_ipv6_magic

Fixes this build error:

net/netfilter/ipvs/ip_vs_core.c: In function 'ip_vs_nat_icmp_v6':
net/netfilter/ipvs/ip_vs_core.c:640: error: implicit declaration of function 'csum_ipv6_magic'

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodrivers/net/atl1c: Remove double test
Julia Lawall [Sat, 28 Aug 2010 05:41:02 +0000]
drivers/net/atl1c: Remove double test

The nic_type field is compared to athr_l2c twice.

The sematic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@expression@
expression E;
@@

(
* E
  || ... || E
|
* E
  && ... && E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostarfire: use BUILD_BUG_ON for netdrv_addr_t
Akinobu Mita [Fri, 27 Aug 2010 19:08:45 +0000]
starfire: use BUILD_BUG_ON for netdrv_addr_t

Detect size mismatch for netdrv_addr_t at build time rather than
checking at module load time.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Ion Badulescu <ionut@badula.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostarfire: use PCI_VDEVICE
Akinobu Mita [Fri, 27 Aug 2010 19:08:36 +0000]
starfire: use PCI_VDEVICE

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Ion Badulescu <ionut@badula.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agophonet: use for_each_set_bit
Akinobu Mita [Fri, 27 Aug 2010 19:08:26 +0000]
phonet: use for_each_set_bit

Replace open-coded loop with for_each_set_bit().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomlx4: use bitmap library
Akinobu Mita [Fri, 27 Aug 2010 19:08:13 +0000]
mlx4: use bitmap library

Replace loops calling set_bit() and clear_bit() with bitmap_set() and
bitmap_clear().

Unlike loops calling set_bit() and clear_bit(), bitmap_set() and
bitmap_clear() are not atomic. But this is ok.
Because the bitmap operations are protected by bitmap->lock
except for initialization of the bitmap in mlx4_bitmap_init().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoeconet: kill unnecessary spin_lock_init()
Akinobu Mita [Fri, 27 Aug 2010 16:41:56 +0000]
econet: kill unnecessary spin_lock_init()

The spinlock aun_queue_lock is initialized statically. It is unnecessary
to initialize by spin_lock_init() at module load time.

This is detected by the semantic patch.

// <smpl>
@def@
declarer name DEFINE_SPINLOCK;
identifier spinlock;
@@

DEFINE_SPINLOCK(spinlock);

@@
identifier def.spinlock;
@@

- spin_lock_init(&spinlock);
// </smpl>

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Julia Lawall <julia@diku.dk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoslip: Use net_device_stats from struct net_device
Tobias Klauser [Thu, 26 Aug 2010 22:12:08 +0000]
slip: Use net_device_stats from struct net_device

Use net_device->stats for stats instead of private variable copies in
struct slip. Use ndo_get_stat64 so the additions can be performed on a private
destination buffer.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: fix wrong return from bnx2x_trylock_hw_lock
Eric Dumazet [Fri, 27 Aug 2010 05:03:53 +0000]
bnx2x: fix wrong return from bnx2x_trylock_hw_lock

bnx2x_trylock_hw_lock() returns a bool :

true if succeeded to acquire the lock.
false in case of error.

-EINVAL is not an acceptable value, since its promoted to true.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agogro: __napi_gro_receive() optimizations
Eric Dumazet [Fri, 27 Aug 2010 05:03:08 +0000]
gro: __napi_gro_receive() optimizations

compare_ether_header() can have a special implementation on 64 bit
arches if CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is defined.

__napi_gro_receive() and vlan_gro_common() can avoid a conditional
branch to perform device match.

On x86_64, __napi_gro_receive() has now 38 instructions instead of 53

As gcc-4.4.3 still choose to not inline it, add inline keyword to this
performance critical function.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostmmac: Make time functionality depend upon RTC_HCTOSYS_DEVICE
David S. Miller [Fri, 27 Aug 2010 03:32:02 +0000]
stmmac: Make time functionality depend upon RTC_HCTOSYS_DEVICE

Based upon a report by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: PCI ID addition
Sritej Velaga [Thu, 26 Aug 2010 14:03:05 +0000]
qlcnic: PCI ID addition

Added PCI ID to board info.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: Fix driver load issue in FW hang
Anirban Chakraborty [Thu, 26 Aug 2010 14:02:52 +0000]
qlcnic: Fix driver load issue in FW hang

If there is a FW hang when the driver loads, it can not determine the FW operational
mode. Fix it by checking the FW state first before issuing any FW commands to
determine its capabilities and thereby detecting driver operational mode.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: Fix missing error codes
Sony Chacko [Thu, 26 Aug 2010 14:02:41 +0000]
qlcnic: Fix missing error codes

In the original code, the error codes returned from some of the functions
are not caught and sent up the caller chain. Fixed it here.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet: use scnprintf() to avoid potential buffer overflow
Changli Gao [Tue, 24 Aug 2010 13:32:58 +0000]
net: use scnprintf() to avoid potential buffer overflow

strlcpy() returns the total length of the string they tried to create, so
we should not use its return value without any check. scnprintf() returns
the number of characters written into @buf not including the trailing '\0',
so use it instead here.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet/sctp: Use pr_fmt and pr_<level>
Joe Perches [Tue, 24 Aug 2010 13:21:08 +0000]
net/sctp: Use pr_fmt and pr_<level>

Change SCTP_DEBUG_PRINTK and SCTP_DEBUG_PRINTK_IPADDR to
use do { print } while (0) guards.
Add SCTP_DEBUG_PRINTK_CONT to fix errors in log when
lines were continued.
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Add a missing newline in "Failed bind hash alloc"

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoipvs: switch to GFP_KERNEL allocations
Simon Horman [Thu, 26 Aug 2010 02:54:31 +0000]
ipvs: switch to GFP_KERNEL allocations

Switch from GFP_ATOMIC allocations to GFP_KERNEL ones in
ip_vs_add_service() and ip_vs_new_dest(), as we hold a mutex and are
allowed to sleep in this context.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoIPVS: convert __ip_vs_securetcp_lock to a spinlock
Simon Horman [Thu, 26 Aug 2010 02:54:30 +0000]
IPVS: convert __ip_vs_securetcp_lock to a spinlock

Also rename __ip_vs_securetcp_lock to ip_vs_securetcp_lock.

Spinlock conversion was suggested by Eric Dumazet.

Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoIPVS: convert __ip_vs_sched_lock to a spinlock
Simon Horman [Thu, 26 Aug 2010 02:54:29 +0000]
IPVS: convert __ip_vs_sched_lock to a spinlock

Also rename __ip_vs_sched_lock to ip_vs_sched_lock.

Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoIPVS: ICMPv6 checksum calculation
Simon Horman [Thu, 26 Aug 2010 20:21:26 +0000]
IPVS: ICMPv6 checksum calculation

Cc: Xiaoyu Du <tingsrain@gmail.com>
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobna: Fixed build break for allyesconfig
Rasesh Mody [Thu, 26 Aug 2010 06:00:27 +0000]
bna: Fixed build break for allyesconfig

This is the patch to fix the build break caused by multiple
definitions of symbols between Brocade's FC/FCOE driver(BFA)
and 10G Networking Driver(BNA).

Changes are:

1. locally used functions are made static

2. unused functions are removed

3. using unique namespaces for the function names that must be
globally visible

Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agor6040: Free irq line on error path
Denis Kirjanov [Tue, 24 Aug 2010 23:57:55 +0000]
r6040: Free irq line on error path

Free irq line on error path.

Signed-off-by: Denis Kirjanov <dkirjanov@kernel.org>
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agos2io: remove lro parameter
Amerigo Wang [Wed, 25 Aug 2010 00:23:39 +0000]
s2io: remove lro parameter

Remove "lro" parameter of s2io driver.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: jon.mason@exar.com
Acked-by: Jon Mason <jon.mason@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobe2net: stats for packets received due to internal switching in ASIC.
Ajit Khaparde [Wed, 25 Aug 2010 00:32:56 +0000]
be2net: stats for packets received due to internal switching in ASIC.

Counters for packets received due to internal switching are already available.
This change will start displaying them in ethtool -S

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobe2net: fix to dynamically generate MAC Address for VFs
Ajit Khaparde [Wed, 25 Aug 2010 00:32:33 +0000]
be2net: fix to dynamically generate MAC Address for VFs

The BE ASIC/firmware doesnot reserve and assign MAC address for VFs.
This results in the VF interfaces being created with MAC Address 0.
The code change proposed takes the MAC address of PF to generate a seed.
MAC Address for VFs are assigned incrementally starting from the seed.
These addresses are programmed in the ASIC by the PF and the VF driver
queries for the MAC address during its probe.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobridge: avoid ethtool on non running interface
stephen hemminger [Tue, 24 Aug 2010 13:12:56 +0000]
bridge: avoid ethtool on non running interface

If bridge port is offline, don't call ethtool to query speed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlge: Fix a deadlock when the interface is going down
Breno Leitao [Tue, 24 Aug 2010 12:50:40 +0000]
qlge: Fix a deadlock when the interface is going down

Currently qlge can deadlock when the interface is going
down, and the mpi_port_cfg_work() is executing on another
processor. It happens because unregister_netdev() holds
the rtnl lock, and the mpi_port_cfg_work() also request
this lock.

Since unregiter_netdev() may wait mpi_port_cfg_work(), who
also request the holding lock, it can cause an deadlock,
displaying the following error:

 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 rmmod         D 00000080c6c1d190     0  3993   2081 0x00008080
 Call Trace:
 [c000000975f56ee0] [c0000000000152a0] .__switch_to+0x100/0x1d0
 [c000000975f56f70] [c0000000005781b4] .schedule+0x3a4/0x8c0
 [c000000975f570c0] [c000000000578e8c] .schedule_timeout+0x24c/0x350
 [c000000975f571e0] [c000000000578a88] .wait_for_common+0x198/0x210
 [c000000975f572c0] [c0000000000abbb4] .__cancel_work_timer+0x2c4/0x2e0
 [c000000975f57400] [d0000000078e7a20] .ql_adapter_down+0x80/0x260 [qlge]
 [c000000975f574b0] [d0000000078e7d80] .qlge_close+0x70/0x130 [qlge]
 [c000000975f57540] [c000000000497ef8] .__dev_close+0x98/0xf0
 [c000000975f575d0] [c000000000497f74] .dev_close+0x24/0x60
 [c000000975f57650] [c000000000498080] .rollback_registered_many+0xd0/0x2b0
 [c000000975f576f0] [c000000000498338] .rollback_registered+0x38/0x50
 [c000000975f57780] [c0000000004983d8] .unregister_netdevice_queue+0x88/0xe0
 [c000000975f57810] [c000000000498574] .unregister_netdev+0x24/0x40
 [c000000975f57890] [d0000000078f6f38] .qlge_remove+0x3c/0x78 [qlge]
 [c000000975f57920] [c0000000002d9298] .pci_device_remove+0x48/0x90
 [c000000975f579a0] [c000000000372850] .__device_release_driver+0xa0/0x130
 [c000000975f57a30] [c000000000372a08] .driver_detach+0x128/0x150
 [c000000975f57ad0] [c000000000371134] .bus_remove_driver+0xc4/0x1a0
 [c000000975f57b70] [c00000000037357c] .driver_unregister+0x8c/0xd0
 [c000000975f57c00] [c0000000002d968c] .pci_unregister_driver+0x5c/0x110
 [c000000975f57ca0] [d0000000078f6ee4] .qlge_exit+0x1c/0x34 [qlge]

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobridge: fix locking comment
Stephen Hemminger [Tue, 24 Aug 2010 13:08:10 +0000]
bridge: fix locking comment

The carrier check is not called from work queue in current code.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agonet/netfilter/ipvs: Eliminate memory leak
Julia Lawall [Tue, 24 Aug 2010 04:39:49 +0000]
net/netfilter/ipvs: Eliminate memory leak

__ip_vs_service_get and __ip_vs_svc_fwm_get increment a reference count, so
that reference count should be decremented before leaving the function in an
error case.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E;
identifier f1;
iterator I;
@@

x = __ip_vs_service_get(...);
<... when != x
     when != true (x == NULL || ...)
     when != if (...) { <+...x...+> }
     when != I (...) { <+...x...+> }
(
 x == NULL
|
 x == E
|
 x->f1
)
...>
* return ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodrivers/net/irda: Eliminate memory leak
Julia Lawall [Tue, 24 Aug 2010 04:38:33 +0000]
drivers/net/irda: Eliminate memory leak

dev_alloc_skb allocates some memory, so that memory should be freed before
leaving the function in an error case.

Corrected some typos in a nearby comment as well.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
local idexpression x;
expression E;
identifier f1;
iterator I;
@@

x = dev_alloc_skb(...);
<... when != x
     when != true (x == NULL || ...)
     when != if (...) { <+...x...+> }
     when != I (...) { <+...x...+> }
(
 x == NULL
|
 x == E
|
 x->f1
)
...>
* return ...;
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agotyphoon: fix a race in typhoon_do_get_stats
Eric Dumazet [Tue, 24 Aug 2010 04:18:13 +0000]
typhoon: fix a race in typhoon_do_get_stats

Its important to store 'final' values in counters,
not using them as temporary variables,
or this might break some SNMP applications.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Dillow <dave@thedillows.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoplip: remove superflous return
Dan Carpenter [Tue, 24 Aug 2010 02:01:05 +0000]
plip: remove superflous return

This return isn't reachable and it obscures the goto on the line before.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostmmac: make ioaddr 'void __iomem *' rather than unsigned long
Giuseppe CAVALLARO [Mon, 23 Aug 2010 20:40:42 +0000]
stmmac: make ioaddr 'void __iomem *' rather than unsigned long

This avoids unnecessary casting and adds the ioaddr in the
private structure.
This patch also removes many warning when compile the driver.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostmmac: remove dead option in the driver's Kconfig
Giuseppe CAVALLARO [Mon, 23 Aug 2010 20:40:41 +0000]
stmmac: remove dead option in the driver's Kconfig

This patch removes the CPU_SUBTYPE_ST40 dependency in the
driver's Kconfig.
In fact, this option has been removed in the commit:
 f96691872439ab2071171d4531c4a95b5d493ae5
as reported by Christian Dietrich.

Note that the driver remains tested on STM platforms, only.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agostmmac: fix_mac_speed is called during 10/100<->1000 speed changes
Pawel Moll [Mon, 23 Aug 2010 20:40:40 +0000]
stmmac: fix_mac_speed is called during 10/100<->1000 speed changes

This patch modifies the stmmac_adjust_link() function so the
fix_mac_speed() is called not only when link speed is changing
between 10 and 100 Mbps (as required in RMII mode) but also
for 1000 Mbps.

Signed-off-by: Pawel Moll <pawel.moll@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agobnx2x: small fix in stats handling
Eric Dumazet [Mon, 23 Aug 2010 19:44:08 +0000]
bnx2x: small fix in stats handling

Use a private variable to fold rx_dropped value, instead of shared
destination buffer, as it might break SNMP applications.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Eilon Greenstein <eilong@broadcom.com>
CC: Dmitry Kravkov <dmitry@broadcom.com>
Acked-By: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agodrivers/net: Remove address use from assignments of function pointers
Joe Perches [Mon, 23 Aug 2010 18:20:03 +0000]
drivers/net: Remove address use from assignments of function pointers

"foo = &function" is more commonly written "foo = function"

Done with coccinelle script:

// <smpl>
@r@
identifier f;
@@

f(...) { ... }

@@
identifier r.f;
@@

- &f
+ f
// </smpl>

drivers/net/tehuti.c used a function and struct with the
same name, the function was renamed.

Compile tested x86 only.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: change reg name
Amit Kumar Salecha [Wed, 25 Aug 2010 04:03:05 +0000]
qlcnic: change reg name

Change QLCNIC_CRB_DEV_REF_COUNT to QLCNIC_CRB_DRV_ACTIVE to match
document.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: fix fw recovery for PF
Amit Kumar Salecha [Wed, 25 Aug 2010 04:03:04 +0000]
qlcnic: fix fw recovery for PF

Privilege function should wait for npar state to be operational
before creating context.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: support port vlan id
Amit Kumar Salecha [Wed, 25 Aug 2010 04:03:03 +0000]
qlcnic: support port vlan id

On NIC Partition capable adapter, Administrator can configure to
tag packet with particular vlan id. Packet will be tagged and strip with
that vlan id. Also if 'Tagging' flag is disable, other packet will be drop.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoqlcnic: eswitch config fixes
Rajesh Borundia [Wed, 25 Aug 2010 04:03:02 +0000]
qlcnic: eswitch config fixes

o remove validation before deleting vlan id
o Add missing 'break' while deleting vlan id.

Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Wed, 25 Aug 2010 18:51:42 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-next-2.6 into for-davem

Conflicts:
drivers/net/wireless/libertas/if_sdio.c

9 years agomlx4_en: Fix build warning in mlx4_en_create_rx_ring.
David S. Miller [Tue, 24 Aug 2010 22:06:27 +0000]
mlx4_en: Fix build warning in mlx4_en_create_rx_ring.

drivers/net/mlx4/en_rx.c: In function ‘mlx4_en_create_rx_ring’:
drivers/net/mlx4/en_rx.c:305: warning: label ‘err_map’ defined but not used

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomlx4_en: updated driver version
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:49 +0000]
mlx4_en: updated driver version

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomlx4_en: Moving to work with GRO
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:46 +0000]
mlx4_en: Moving to work with GRO

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomlx4_en: UDP RSS support
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:42 +0000]
mlx4_en: UDP RSS support

Adding capability for RSS for UDP traffic, hashing is done based on
IP addresses and UDP port number.
The support depends on HW/FW capabilities.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomlx4_en: reconfiguring mac address.
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:38 +0000]
mlx4_en: reconfiguring mac address.

When Mac address is removed from one port of the CX2 device, the other device
should reconfigure its Mac.
This fixes an issue with failover, when both ports have the same Mac address,
and one of the ports, is closed, the second one stops receiving traffic.
(bugzilla #1965 at bugs.openfabrics.org)

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomlx4_en: get/set ringsize uses actual ring size
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:34 +0000]
mlx4_en: get/set ringsize uses actual ring size

In case that the rings were not fully filled, the report in Ethtool
should be according to the actual size that was filled.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agomlx4_en: Fixing report in Ethtool get_settings
Yevgeny Petrilin [Tue, 24 Aug 2010 03:46:23 +0000]
mlx4_en: Fixing report in Ethtool get_settings

The report now based on query from FW, giving the correct tranciever type
and link speed.

Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>