11 years agodrm/i915: Set preferred mode for integrated TV according to TV format
ling.ma@intel.com [Mon, 20 Jul 2009 05:20:23 +0000]
drm/i915: Set preferred mode for integrated TV according to TV format

In order to get best possible quality image we chose 640x480 for
NTSC, PAL and 480p, 1280x720 for 720p, 1920x1080 for 1080i/p
TV format respectively.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: fix 845G FIFO size & burst length
Jesse Barnes [Wed, 22 Jul 2009 19:54:59 +0000]
drm/i915: fix 845G FIFO size & burst length

I had one report of flicker due to FIFO underruns on 845G.  Scott was
kind enough to test a few patches and report success with this one.
Looks like 845G measures FIFO size slightly differently than other
chips, and we were also clobbering the FIFO burst length.  Fixing both
of those issues gives him a healthy machine again.

Note that we still only adjust plane A's watermark in the 830/845
case.  If someone is willing to test we could support a bigger variety
of dual-head 830/845 configurations with a bit more code.

Fixes fdo bug #19304 (again).

Reported-by: Scott Hansen <scottandchrystie@comcast.net>
Tested-by: Scott Hansen <scottandchrystie@comcast.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: fix VGA detect on IGDNG
Zhenyu Wang [Thu, 23 Jul 2009 17:00:33 +0000]
drm/i915: fix VGA detect on IGDNG

Check FORCE_DETECT bit to be clear for the finish
of hotplug detect process. Also check possible mono
monitor which should also be marked as connected.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Add eDP support on IGDNG mobile chip
Zhenyu Wang [Thu, 23 Jul 2009 17:00:32 +0000]
drm/i915: Add eDP support on IGDNG mobile chip

This adds embedded DisplayPort support on next mobile chip which
aims to replace origin LVDS port. VBT's driver feature block has
been used to determine the type of current internal panel for eDP
or LVDS.

Currently no panel fitting support for eDP and backlight control
would be added in future.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: enable DisplayPort support on IGDNG
Zhenyu Wang [Thu, 23 Jul 2009 17:00:31 +0000]
drm/i915: enable DisplayPort support on IGDNG

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Fix channel ending action for DP aux transaction
Zhenyu Wang [Thu, 23 Jul 2009 17:00:30 +0000]
drm/i915: Fix channel ending action for DP aux transaction

We should use current channel 'status' bits to clear DP aux channel's
done and error bits, instead of using the channel setting bits, that
will set send/busy bit again to initiate new transaction.

This also includes also some minor cleanup.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: fix issue in display pipe setup on IGDNG
Zhenyu Wang [Thu, 23 Jul 2009 17:00:29 +0000]
drm/i915: fix issue in display pipe setup on IGDNG

During pipe DPMS off, instead of busy waiting pipe off, insert
delays during wait and don't loop after enough tries which matches
spec requirement. Also try to match DPMS on path by disable FDI TX
PLL in DPMS off. Disable PF by writing PF_WIN_SZ which really trigger
the update.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: disable VGA plane reliably
Zhenyu Wang [Thu, 23 Jul 2009 17:00:28 +0000]
drm/i915: disable VGA plane reliably

This does VGA disable like DDX driver. SR01 bit 5 should be set
before VGA plane disable through control register, otherwise we
might get random crash and lockups.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/I915: Fix offset to DVO timings in LVDS data
Zhao Yakui [Tue, 28 Jul 2009 02:54:13 +0000]
drm/I915: Fix offset to DVO timings in LVDS data

Now the DVO timing in LVDS data entry is obtained by using the
following step:
    a. get the entry size for every LVDS panel data
    b. Get the LVDS fp entry for the preferred panel type
    c. get the DVO timing by using entry->dvo_timing

In our driver the entry->dvo_timing is related with the size of
lvds_fp_timing. For example: the size is 46.

But it seems that the size of lvds_fp_timing varies on the differnt
platform. In such case we will get the incorrect DVO timing entry
because of the incorrect DVO offset in LVDS panel data entry.
This also removes a hack on new IGDNG to get proper DVO timing.

Calculate the DVO timing offset in LVDS data entry to get the DVO timing
    a. get the DVO timing offset in the LVDS fp data entry by using the
pointer definition in LVDS data ptr
    b. get the LVDS data entry
    c. get the DVO timing by adding the DVO timing offset to data entry

https://bugs.freedesktop.org/show_bug.cgi?id=22787

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Tested-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: hdmi detection according by reading edid
ling.ma@intel.com [Thu, 16 Jul 2009 09:23:09 +0000]
drm/i915: hdmi detection according by reading edid

According to investigations from windows team ,hw team,
and our test results on all 4x platofrms available
(gm45, g45b, q45, g45a, g45c, g41a, and g41), we find
currently Hot plug live status and Hot plug interrupt
detection are not reliable, sometime the results from
the two approaches are contradicts. So we chose edid
detection for hdmi output.

Signed-off-by: Ma Ling <ling.ma@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: correct self-refresh calculation in "everything off" case
Jesse Barnes [Thu, 16 Jul 2009 20:01:02 +0000]
drm/i915: correct self-refresh calculation in "everything off" case

If no planes are enabled, the self-refresh calculation may end up doing
a divide by zero.  This patch should prevent that by making sure at
least one of the CRTCs had a valid hdisplay value.

Reported-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: handle FIFO oversubsription correctly
Jesse Barnes [Thu, 16 Jul 2009 20:01:01 +0000]
drm/i915: handle FIFO oversubsription correctly

If you're pushing a plane hard (i.e. you need most or all of the FIFO
entries just to cover your frame refresh latency), the watermark level
may end up being negative.  So fix up the signed vs. unsigned math in
the calculation function to handle this correctly, giving all available
FIFO entries to such a configuration.

Reported-by: Eric Anholt <eric@anholt.net>
Tested-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: FIFO watermark calculation fixes
Jesse Barnes [Tue, 14 Jul 2009 17:15:56 +0000]
drm/i915: FIFO watermark calculation fixes

I discovered several bugs in the FIFO code that was recently applied.
Some of them fell into the "how did this ever work" category, since in
some cases we were using the wrong FIFO size values, and the
calculations ended up being way off.

This patch fixes all the bugs I found, and works well on my GM45, 915GM
and 855GM test machines; but as usual with these sorts of patches
broader testing is definitely requested (in particular this patch
affects 830, 845 and 865 for which I don't have test hardware).

Overall, the patch clarifies the watermark calculation function by
adding some comments and debug info, and making the variable names a
bit clearer.  The "get FIFO size" portion of the code has also been
corrected, so we should be able to properly detect the FIFO allocations
for each pipe, for use in the watermark calculation.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: ignore lvds on AOpen Mini PC MP-915
Tormod Volden [Mon, 13 Jul 2009 20:26:48 +0000]
drm/i915: ignore lvds on AOpen Mini PC MP-915

This motherboard thinks it has an LVDS connected, so without this
patch the screen goes blank on the connected VGA monitor. More
information (for the non-KMS case) in fd.o bug #18004.

Signed-off-by: Tormod Volden <debian.tormod@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Allow frame buffers up to 4096x4096 on 915/945 class hardware
Keith Packard [Mon, 13 Jul 2009 06:53:17 +0000]
drm/i915: Allow frame buffers up to 4096x4096 on 915/945 class hardware

The 915 and 945 scanout engines can handle frame buffers up to 4096 pixels
wide. Pre-9xx hardware has an 8192 byte stride limit, and so we leave the
existing 2048 max in place.

I'm not sure why we limit the height to the same value; there's no intrinsic
hardware limit in the scanout engine.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: refactor error detection & collection
Jesse Barnes [Sat, 11 Jul 2009 20:48:03 +0000]
drm/i915: refactor error detection & collection

This patch refactors the existing error detection and collection code,
placing most of it in i915_handle_error(). Additionally, we introduce a
work queue for scheduling post-crash tasks such as generating a uevent.
Using the uevent facility, userspace should be able to capture a
post-mortem dump for diagnostics.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ben Gamari <bgamari.foss@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Set lvds dual channel according to register from vbios
Florian Mickler [Mon, 13 Jul 2009 10:40:32 +0000]
drm/i915: Set lvds dual channel according to register from vbios

Vbios will set lvds register correctly based on
current algorithm for lingle/dual Channel LVDS when
system boot, so we can accept this configuration
directly, regardless of LVDS enable status.

It fixed freedesktop.org bug #22262

Signed-off-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agoMerge branch 'kmemleak' of git://linux-arm.org/linux-2.6
Linus Torvalds [Sun, 12 Jul 2009 19:24:35 +0000]
Merge branch 'kmemleak' of git://linux-arm.org/linux-2.6

* 'kmemleak' of git://linux-arm.org/linux-2.6:
  kmemleak: Remove alloc_bootmem annotations introduced in the past
  kmemleak: Add callbacks to the bootmem allocator
  kmemleak: Allow partial freeing of memory blocks
  kmemleak: Trace the kmalloc_large* functions in slub
  kmemleak: Scan objects allocated during a scanning episode
  kmemleak: Do not acquire scan_mutex in kmemleak_open()
  kmemleak: Remove the reported leaks number limitation
  kmemleak: Add more cond_resched() calls in the scanning thread
  kmemleak: Renice the scanning thread to +10

11 years agoAFS: Fix compilation warning
Artem Bityutskiy [Thu, 9 Jul 2009 09:44:30 +0000]
AFS: Fix compilation warning

Fix the following warning:

  fs/afs/dir.c: In function 'afs_d_revalidate':
  fs/afs/dir.c:567: warning: 'fid.vnode' may be used uninitialized in this function
  fs/afs/dir.c:567: warning: 'fid.unique' may be used uninitialized in this function

by marking the 'fid' variable as an uninitialized_var.  The problem is
that gcc doesn't always manage to work out that fid is always set on the
path through the function that uses it.

Cc: linux-afs@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoheaders: smp_lock.h redux
Alexey Dobriyan [Sat, 11 Jul 2009 18:08:37 +0000]
headers: smp_lock.h redux

* Remove smp_lock.h from files which don't need it (including some headers!)
* Add smp_lock.h to files which do need it
* Make smp_lock.h include conditional in hardirq.h
  It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT

  This will make hardirq.h inclusion cheaper for every PREEMPT=n config
  (which includes allmodconfig/allyesconfig, BTW)

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agopersonality: fix PER_CLEAR_ON_SETID
Julien Tinnes [Fri, 26 Jun 2009 18:27:40 +0000]
personality: fix PER_CLEAR_ON_SETID

We have found that the current PER_CLEAR_ON_SETID mask on Linux doesn't
include neither ADDR_COMPAT_LAYOUT, nor MMAP_PAGE_ZERO.

The current mask is READ_IMPLIES_EXEC|ADDR_NO_RANDOMIZE.

We believe it is important to add MMAP_PAGE_ZERO, because by using this
personality it is possible to have the first page mapped inside a
process running as setuid root.  This could be used in those scenarios:

 - Exploiting a NULL pointer dereference issue in a setuid root binary
 - Bypassing the mmap_min_addr restrictions of the Linux kernel: by
   running a setuid binary that would drop privileges before giving us
   control back (for instance by loading a user-supplied library), we
   could get the first page mapped in a process we control.  By further
   using mremap and mprotect on this mapping, we can then completely
   bypass the mmap_min_addr restrictions.

Less importantly, we believe ADDR_COMPAT_LAYOUT should also be added
since on x86 32bits it will in practice disable most of the address
space layout randomization (only the stack will remain randomized).

Signed-off-by: Julien Tinnes <jt@cr0.org>
Signed-off-by: Tavis Ormandy <taviso@sdf.lonestar.org>
Cc: stable@kernel.org
Acked-by: Christoph Hellwig <hch@infradead.org>
Acked-by: Kees Cook <kees@ubuntu.com>
Acked-by: Eugene Teo <eugene@redhat.com>
[ Shortened lines and fixed whitespace as per Christophs' suggestion ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoDon't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x
Linus Torvalds [Sun, 12 Jul 2009 18:25:04 +0000]
Don't use '-fwrapv' compiler option: it's buggy in gcc-4.1.x

This causes kernel images that don't run init to completion with certain
broken gcc versions.

This fixes kernel bugzilla entry:
http://bugzilla.kernel.org/show_bug.cgi?id=13012

I suspect the gcc problem is this:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=28230

Fix the problem by using the -fno-strict-overflow flag instead, which
not only does not exist in the known-to-be-broken versions of gcc (it
was introduced later than fwrapv), but seems to be much less disturbing
to gcc too: the difference in the generated code by -fno-strict-overflow
are smaller (compared to using neither flag) than when using -fwrapv.

Reported-by: Barry K. Nathan <barryn@pobox.com>
Pushed-by: Frans Pop <elendil@planet.nl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Sat, 11 Jul 2009 18:32:28 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT
  hwmon: (sht15) Remove unnecessary semicolon
  hwmon: (max6650) Fix lock imbalance

11 years agoRevert "fuse: Fix build error" as unnecessary
Linus Torvalds [Sat, 11 Jul 2009 18:22:34 +0000]
Revert "fuse: Fix build error" as unnecessary

This reverts commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21.

Trond had a better fix, which is the parent of this one ("Fix compile
error due to congestion_wait() changes")

Requested-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoFix compile error due to congestion_wait() changes
Trond Myklebust [Sat, 11 Jul 2009 14:06:54 +0000]
Fix compile error due to congestion_wait() changes

Move the definition of BLK_RW_ASYNC/BLK_RW_SYNC into linux/backing-dev.h
so that it is available to all callers of set/clear_bdi_congested().

This replaces commit 097041e576ee3a50d92dd643ee8ca65bf6a62e21 ("fuse:
Fix build error"), which will be reverted.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agohwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT
Alistair John Strachan [Sat, 11 Jul 2009 11:42:38 +0000]
hwmon: (abituguru3) DMI probing for AB9, AB9 QuadQT and IX38 QuadGT

Switch the AB9, AB9 QuadQT and IX38 QuadGT over from port
probing to the preferred DMI probe method.

Signed-off-by: Alistair John Strachan <alistair@devzero.co.uk>
Tested-by: dan <dan@deeog.com>
Tested-by: Nygel Lyndley <nygel.lyndley@gmail.com>
Tested-by: Dmitriy Fedchenko <dmitriy-fedc@yandex.ru>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: (sht15) Remove unnecessary semicolon
Joe Perches [Sat, 11 Jul 2009 11:42:37 +0000]
hwmon: (sht15) Remove unnecessary semicolon

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agohwmon: (max6650) Fix lock imbalance
Jiri Slaby [Sat, 11 Jul 2009 11:42:37 +0000]
hwmon: (max6650) Fix lock imbalance

Add omitted update_lock to one switch/case in set_div.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Acked-by: Hans J. Koch <hjk@linutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sat, 11 Jul 2009 02:19:09 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - targa and targa-2ch fix
  ALSA: hda - fix beep tone calculation for IDT/STAC codecs
  ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC)
  ALSA: hda - Disable AMD SB600 64bit address support only
  ALSA: hda - Check widget types while parsing capture source in patch_via.c
  ALSA: hda - Fix capture source selection in patch_via.c
  ALSA: hda - Add missing EAPD initialization for VIA codecs
  ALSA: hda - Clean up VT170x dig-in initialization code
  ALSA: hda - Fix error path in the sanity check in azx_pcm_open()
  ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section
  ASoC: Fix wm8753 register cache size and initialization
  ASoC: add locking to mpc5200-psc-ac97 driver
  ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared
  ASoC: Fix register cache initialisation for WM8753

11 years agoisofs: fix Joliet regression
Bartlomiej Zolnierkiewicz [Fri, 10 Jul 2009 10:34:27 +0000]
isofs: fix Joliet regression

commit 5404ac8e4418ab3d254950ee4f9bcafc1da20b4a ("isofs: cleanup mount
option processing") missed conversion of joliet option flag resulting
in non-working Joliet support.

CC: walt <w41ter@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotty: Fix the PL2303 private methods for sysrq
Alan Cox [Thu, 9 Jul 2009 12:36:58 +0000]
tty: Fix the PL2303 private methods for sysrq

PL2303 has private data shovelling methods that also have no fast path. Fix
them to work the same way as the default handler.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotty: Fix USB kref leak
Alan Cox [Thu, 9 Jul 2009 12:36:22 +0000]
tty: Fix USB kref leak

The sysrq code acquired a kref leak. Fix it by passing the tty separately
from the caller (thus effectively using the callers kref which all the
callers hold anyway)

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotty: Sort out the USB sysrq changes that wrecked performance
Alan Cox [Thu, 9 Jul 2009 12:35:52 +0000]
tty: Sort out the USB sysrq changes that wrecked performance

We can't go around calling all sorts of magic per character functions at
full rate 3G data speed.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'linux-next' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Sat, 11 Jul 2009 02:15:34 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: fix compilation warnings
  UBI: fix NOR flash recovery
  UBI: nicify image sequence number handling
  UBI: add image sequence number to EC header
  UBI: remove bogus debugging checks
  UBI: add empty eraseblocks verification

11 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Sat, 11 Jul 2009 02:14:48 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix corruption dump
  UBIFS: clean up free space checking
  UBIFS: small amendments in the LEB scanning code
  UBIFS: dump a little more in case of corruptions
  MAINTAINERS: update ahunter's e-mail address
  UBIFS: allow more than one volume to be mounted
  UBIFS: fix assertion warning
  UBIFS: minor spelling and grammar fixes
  UBIFS: fix 64-bit divisions in debug print
  UBIFS: few spelling fixes
  UBIFS: set write-buffer timout to 3-5 seconds
  UBIFS: slightly optimize write-buffer timer usage
  UBIFS: improve debugging messaged
  UBIFS: fix integer overflow warning

11 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Sat, 11 Jul 2009 02:12:51 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] define KTIME_SCALAR for 32-bit s390
  [S390] add generic atomic64 support for 31 bit
  [S390] improve suspend/resume error messages
  [S390] set SCHED_OMIT_FRAME_POINTER for s390
  [S390] add __ucmpdi2() helper function
  [S390] perf_counter build fix
  [S390] shutdown actions: save/return rc from init function
  [S390] dasd: correct debugfeature sense dump
  [S390] udelay: disable lockdep to avoid false positives
  [S390] monreader: fix dev_set_drvdata conversion
  [S390] sclp: fix compile error for !SCLP_CONSOLE

11 years agoMerge branch 'for-linus' of git://git.open-osd.org/linux-open-osd
Linus Torvalds [Sat, 11 Jul 2009 02:12:24 +0000]
Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osd

* 'for-linus' of git://git.open-osd.org/linux-open-osd:
  osdblk: Adjust queue limits to lower device's limits
  osdblk: a Linux block device for OSD objects
  MAINTAINERS: Add osd maintained files (F:)
  exofs: Avoid using file_fsync()
  exofs: Remove IBM copyrights
  exofs: Fix bio leak in error handling path (sync read)

11 years agoMerge branch 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt...
Linus Torvalds [Sat, 11 Jul 2009 02:10:59 +0000]
Merge branch 'drm-intel-next' of git://git./linux/kernel/git/anholt/drm-intel

* 'drm-intel-next' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (22 commits)
  drm/i915: Fix for LVDS VBT change on IGDNG
  drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.
  drm/i915: Refactor calls to unmap_mapping_range
  drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode
  drm: Disable the unused connectors explicitly when resuming with KMS.
  drm/i915: Restore the KMS modeset for every activated CRTC
  drm/i915: Fix harmless warning from patch merged after i2c rework.
  drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
  drm/i915: Check the LID device to decide whether the LVDS should be initialized
  drm/i915: Move lock to more reasonable location
  drm/i915: Add gtt_offset to gem object list debugfs output
  drm/i915: Remove gtt_bound from drm_i915_gem_object
  drm/i915: Disable VGA output when doing DRM_MODE_DPMS_OFF.
  drm/i915: crt fetch EDID by DVI-I converter on G4x platform
  drm/i915: Don't update display FIFO watermark on IGDNG
  drm/i915: Adjust DisplayPort clocks to use 96MHz reference
  drm/i915: Make driver less chatty
  drm/i915: fix up a raw 64bit divide
  drm/i915: enable sdvo lvds scaling function.
  drm/i915: Set SSC frequency for 8xx chips correctly
  ...

11 years agoDoc: move Documentation/exception.txt into x86 subdir
Amerigo Wang [Fri, 10 Jul 2009 22:02:44 +0000]
Doc: move Documentation/exception.txt into x86 subdir

exception.txt only explains the code on x86, so it's better to
move it into Documentation/x86 directory.

And also rename it to exception-tables.txt which looks much
more reasonable.

This patch is on top of the previous one.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoDoc: update Documentation/exception.txt
Amerigo Wang [Fri, 10 Jul 2009 22:02:41 +0000]
Doc: update Documentation/exception.txt

Update Documentation/exception.txt.
Remove trailing whitespaces in it.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agofuse: Fix build error
Larry Finger [Sat, 11 Jul 2009 01:06:42 +0000]
fuse: Fix build error

When building v2.6.31-rc2-344-g69ca06c, the following build errors are
found due to missing includes:

CC [M] fs/fuse/dev.o
fs/fuse/dev.c: In function ‘request_end’:
fs/fuse/dev.c:289: error: ‘BLK_RW_SYNC’ undeclared (first use in this function)
...
fs/nfs/write.c: In function ‘nfs_set_page_writeback’:
fs/nfs/write.c:207: error: ‘BLK_RW_ASYNC’ undeclared (first use in this function)

Signed-off-by: Larry Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 10 Jul 2009 21:29:58 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: reset oom_cfqq in cfq_set_request()
  block: fix sg SG_DXFER_TO_FROM_DEV regression
  block: call blk_scsi_ioctl_init()
  Fix congestion_wait() sync/async vs read/write confusion

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Fri, 10 Jul 2009 21:27:21 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix disorder in cp count on error during deleting checkpoints
  nilfs2: fix lockdep warning between regular file and inode file
  nilfs2: fix incorrect KERN_CRIT messages in case of write failures
  nilfs2: fix hang problem of log writer which occurs after write failures
  nilfs2: remove unlikely directive causing mis-conversion of error code

11 years agoMerge branch 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 10 Jul 2009 21:25:59 +0000]
Merge branch 'core-fixes-for-linus-2' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  dma-debug: Fix the overlap() function to be correct and readable
  oprofile: reset bt_lost_no_mapping with other stats
  x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon
  signals: declare sys_rt_tgsigqueueinfo in syscalls.h
  rcu: Mark Hierarchical RCU no longer experimental
  dma-debug: Put all hash-chain locks into the same lock class
  dma-debug: fix off-by-one error in overlap function

11 years agoMerge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux...
Linus Torvalds [Fri, 10 Jul 2009 21:25:03 +0000]
Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
  perf report: Add "Fractal" mode output - support callchains with relative overhead rate
  perf_counter tools: callchains: Manage the cumul hits on the fly
  perf report: Change default callchain parameters
  perf report: Use a modifiable string for default callchain options
  perf report: Warn on callchain output request from non-callchain file
  x86: atomic64: Inline atomic64_read() again
  x86: atomic64: Clean up atomic64_sub_and_test() and atomic64_add_negative()
  x86: atomic64: Improve atomic64_xchg()
  x86: atomic64: Export APIs to modules
  x86: atomic64: Improve atomic64_read()
  x86: atomic64: Code atomic(64)_read and atomic(64)_set in C not CPP
  x86: atomic64: Fix unclean type use in atomic64_xchg()
  x86: atomic64: Make atomic_read() type-safe
  x86: atomic64: Reduce size of functions
  x86: atomic64: Improve atomic64_add_return()
  x86: atomic64: Improve cmpxchg8b()
  x86: atomic64: Improve atomic64_read()
  x86: atomic64: Move the 32-bit atomic64_t implementation to a .c file
  x86: atomic64: The atomic64_t data type should be 8 bytes aligned on 32-bit too
  perf report: Annotate variable initialization
  ...

11 years agosched: optimize cond_resched()
Peter Zijlstra [Fri, 10 Jul 2009 12:57:57 +0000]
sched: optimize cond_resched()

Optimize cond_resched() by removing one conditional.

Currently cond_resched() checks system_state ==
SYSTEM_RUNNING in order to avoid scheduling before the
scheduler is running.

We can however, as per suggestion of Matt, use
PREEMPT_ACTIVE to accomplish that very same.

Suggested-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agosched: INIT_PREEMPT_COUNT
Peter Zijlstra [Fri, 10 Jul 2009 12:57:56 +0000]
sched: INIT_PREEMPT_COUNT

Pull the initial preempt_count value into a single
definition site.

Maintainers for: alpha, ia64 and m68k, please have a look,
your arch code is funny.

The header magic is a bit odd, but similar to the KERNEL_DS
one, CPP waits with expanding these macros until the
INIT_THREAD_INFO macro itself is expanded, which is in
arch/*/kernel/init_task.c where we've already included
sched.h so we're good.

Cc: tony.luck@intel.com
Cc: rth@twiddle.net
Cc: geert@linux-m68k.org
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agodrm/i915: Fix for LVDS VBT change on IGDNG
Zhenyu Wang [Fri, 10 Jul 2009 06:39:59 +0000]
drm/i915: Fix for LVDS VBT change on IGDNG

IGDNG mobile chip's LVDS data block removes panel fitting
register definition. So this fixes offset for LVDS timing
block parsing. Thanks for Michael Fu to catch this.

Signed-off-by: Zhenyu Wang <zhenyu.z.wang@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Zap the GTT mapping when transitioning from untiled to tiled.
Eric Anholt [Fri, 10 Jul 2009 20:02:26 +0000]
drm/i915: Zap the GTT mapping when transitioning from untiled to tiled.

As of 52dc7d32b88156248167864f77a9026abe27b432, we could leave an old
linear GTT mapping in place, so that apps trying to GTT-mapped write in
tiled data wouldn't get the fence added, and garbage would get displayed.

Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Refactor calls to unmap_mapping_range
Chris Wilson [Fri, 10 Jul 2009 07:18:50 +0000]
drm/i915: Refactor calls to unmap_mapping_range

As we call unmap_mapping_range() twice in identical fashion, refactor
and attempt to explain why we need to call unmap_mapping_range().

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodma-debug: Fix the overlap() function to be correct and readable
Ingo Molnar [Fri, 10 Jul 2009 19:38:02 +0000]
dma-debug: Fix the overlap() function to be correct and readable

Linus noticed how unclean and buggy the overlap() function is:

 - It uses convoluted (and bug-causing) positive checks for
   range overlap - instead of using a more natural negative
   check.

 - Even the positive checks are buggy: a positive intersection
   check has four natural cases while we checked only for three,
   missing the (addr < start && addr2 == end) case for example.

 - The variables are mis-named, making it non-obvious how the
   check was done.

 - It needlessly uses u64 instead of unsigned long. Since these
   are kernel memory pointers and we explicitly exclude highmem
   ranges anyway we cannot ever overflow 32 bits, even if we
   could. (and on 64-bit it doesnt matter anyway)

All in one, this function needs a total revamp. I used Linus's
suggestions minus the paranoid checks (we cannot overflow really
because if we get totally bad DMA ranges passed far more things
break in the systems than just DMA debugging). I also fixed a
few other small details i noticed.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agodrm/i915: Avoid saving/restore the modesetting registers twice in KMS mode
Zhao Yakui [Wed, 8 Jul 2009 06:13:14 +0000]
drm/i915: Avoid saving/restore the modesetting registers twice in KMS mode

In KMS mode we now use the normal mode-setting paths to set the modes
back to the current configuration, so we don't need to also run the more
limited non-KMS implementation of modesetting for resume.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm: Disable the unused connectors explicitly when resuming with KMS.
Zhao Yakui [Wed, 8 Jul 2009 06:13:13 +0000]
drm: Disable the unused connectors explicitly when resuming with KMS.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Restore the KMS modeset for every activated CRTC
Zhao Yakui [Wed, 8 Jul 2009 06:13:12 +0000]
drm/i915: Restore the KMS modeset for every activated CRTC

Restore the modeset for every activated CRTC in course of resume.
This is realized by calling the function of drm_helper_resume_force_mode.
Note: it is meaningful only for the KMS mode.

https://bugs.freedesktop.org/show_bug.cgi?id=21719
https://bugs.freedesktop.org/show_bug.cgi?id=21708
https://bugs.freedesktop.org/show_bug.cgi?id=22285
https://bugs.freedesktop.org/show_bug.cgi?id=22263

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Fix harmless warning from patch merged after i2c rework.
Eric Anholt [Fri, 10 Jul 2009 19:28:30 +0000]
drm/i915: Fix harmless warning from patch merged after i2c rework.

Signed-off-by: Eric Anholt <eric@anholt.net>

11 years agodrm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.
Eric Anholt [Thu, 2 Jul 2009 16:30:50 +0000]
drm/i915: Disable GEM when a broken video BIOS takes up the whole aperture.

This is seen on some G41 systems, where the BIOS will consume all but
a few KB of the aperture.  This should be bad for all operating systems, as
it means that the OS can't dynamically manage memory between graphics and
the rest of the system, and OSes that did static memory management
statically add memory in addition to the BIOS allocation anyway.  So, instead
of working around it, just fail out verbosely.

fd.o bug #21574

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

11 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 10 Jul 2009 18:41:41 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  tracing: Fix trace_print_seq()
  kprobes: No need to unlock kprobe_insn_mutex
  tracing/fastboot: Document the need of initcall_debug
  trace_export: Repair missed fields
  tracing: Fix stack tracer sysctl handling

11 years agocfq-iosched: reset oom_cfqq in cfq_set_request()
Vivek Goyal [Thu, 9 Jul 2009 20:13:16 +0000]
cfq-iosched: reset oom_cfqq in cfq_set_request()

In case memory is scarce, we now default to oom_cfqq. Once memory is
available again, we should allocate a new cfqq and stop using oom_cfqq for
a particular io context.

Once a new request comes in, check if we are using oom_cfqq, and if yes,
try to allocate a new cfqq.

Tested the patch by forcing the use of oom_cfqq and upon next request thread
realized that it was using oom_cfqq and it allocated a new cfqq.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

11 years agoblock: fix sg SG_DXFER_TO_FROM_DEV regression
FUJITA Tomonori [Thu, 9 Jul 2009 12:46:53 +0000]
block: fix sg SG_DXFER_TO_FROM_DEV regression

I overlooked SG_DXFER_TO_FROM_DEV support when I converted sg to use
the block layer mapping API (2.6.28).

Douglas Gilbert explained SG_DXFER_TO_FROM_DEV:

http://www.spinics.net/lists/linux-scsi/msg37135.html

=
The semantics of SG_DXFER_TO_FROM_DEV were:
   - copy user space buffer to kernel (LLD) buffer
   - do SCSI command which is assumed to be of the DATA_IN
     (data from device) variety. This would overwrite
     some or all of the kernel buffer
   - copy kernel (LLD) buffer back to the user space.

The idea was to detect short reads by filling the original
user space buffer with some marker bytes ("0xec" it would
seem in this report). The "resid" value is a better way
of detecting short reads but that was only added this century
and requires co-operation from the LLD.
=

This patch changes the block layer mapping API to support this
semantics. This simply adds another field to struct rq_map_data and
enables __bio_copy_iov() to copy data from user space even with READ
requests.

It's better to add the flags field and kills null_mapped and the new
from_user fields in struct rq_map_data but that approach makes it
difficult to send this patch to stable trees because st and osst
drivers use struct rq_map_data (they were converted to use the block
layer in 2.6.29 and 2.6.30). Well, I should clean up the block layer
mapping API.

zhou sf reported this regiression and tested this patch:

http://www.spinics.net/lists/linux-scsi/msg37128.html
http://www.spinics.net/lists/linux-scsi/msg37168.html

Reported-by: zhou sf <sxzzsf@gmail.com>
Tested-by: zhou sf <sxzzsf@gmail.com>
Cc: stable@kernel.org
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

11 years agoblock: call blk_scsi_ioctl_init()
FUJITA Tomonori [Thu, 9 Jul 2009 07:48:28 +0000]
block: call blk_scsi_ioctl_init()

Currently, blk_scsi_ioctl_init() is not called since it lacks
an initcall marking. This causes the command table to be
unitialized, hence somce commands are block when they should
not have been.

This fixes a regression introduced by commit
018e0446890661504783f92388ecce7138c1566d

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

11 years agoFix congestion_wait() sync/async vs read/write confusion
Jens Axboe [Thu, 9 Jul 2009 12:52:32 +0000]
Fix congestion_wait() sync/async vs read/write confusion

Commit 1faa16d22877f4839bd433547d770c676d1d964c accidentally broke
the bdi congestion wait queue logic, causing us to wait on congestion
for WRITE (== 1) when we really wanted BLK_RW_ASYNC (== 0) instead.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

11 years agooprofile: reset bt_lost_no_mapping with other stats
Maynard Johnson [Wed, 27 May 2009 15:15:08 +0000]
oprofile: reset bt_lost_no_mapping with other stats

The bt_lost_no_mapping is not getting reset at the start of a
profiling run, thus the oprofiled.log shows erroneous values for this
statistic. The attached patch fixes this problem.

Signed-off-by: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Fri, 10 Jul 2009 09:17:12 +0000]
Merge branch 'fix/hda' into for-linus

* fix/hda:
  ALSA: hda - targa and targa-2ch fix
  ALSA: hda - fix beep tone calculation for IDT/STAC codecs
  ALSA: hda - Missing volume controls for Intel HDA (ALC269/EeePC)
  ALSA: hda - Disable AMD SB600 64bit address support only
  ALSA: hda - Check widget types while parsing capture source in patch_via.c
  ALSA: hda - Fix capture source selection in patch_via.c
  ALSA: hda - Add missing EAPD initialization for VIA codecs
  ALSA: hda - Clean up VT170x dig-in initialization code
  ALSA: hda - Fix error path in the sanity check in azx_pcm_open()
  ALSA: hda - move 8086:fb30 quirk (stac9205) to the proper section

11 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Fri, 10 Jul 2009 09:17:11 +0000]
Merge branch 'fix/asoc' into for-linus

* fix/asoc:
  ASoC: Fix wm8753 register cache size and initialization
  ASoC: add locking to mpc5200-psc-ac97 driver
  ASoC: Fix mpc5200-psc-ac97 to ensure the data ready bit is cleared
  ASoC: Fix register cache initialisation for WM8753

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Fri, 10 Jul 2009 03:45:01 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF support
  [WATCHDOG] SA1100 watchdog maximum timeout
  [WATCHDOG] w83697ug, fix lock imbalance
  [WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolons

11 years agomx3fb: fix regression with uninitalized fb_info->mm_lock mutex
Krzysztof Helt [Thu, 9 Jul 2009 18:14:10 +0000]
mx3fb: fix regression with uninitalized fb_info->mm_lock mutex

Remove call to the mx3fb_set_par() and the mx3fb_blank() before the
register_framebuffer().

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap
locking"

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agosm501fb: fix regression with uninitalized fb_info->mm_lock mutex
Krzysztof Helt [Thu, 9 Jul 2009 18:15:44 +0000]
sm501fb: fix regression with uninitalized fb_info->mm_lock mutex

Remove call to the fb_set_par() before the register_framebuffer().

This fixes a problem with uninitialized the fb_info->mm_lock mutex
introduced by the commit 537a1bf059f " fbdev: add mutex for fb_mmap
locking"

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Fri, 10 Jul 2009 03:40:58 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: when ATTR_READONLY is set, only clear write bits on non-directories
  cifs: remove cifsInodeInfo->inUse counter
  cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget
  [CIFS] update cifs version number
  cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls
  cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO
  cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo
  cifs: add pid of initiating process to spnego upcall info
  cifs: fix regression with O_EXCL creates and optimize away lookup
  cifs: add new cifs_iget function and convert unix codepath to use it

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 10 Jul 2009 03:33:18 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (29 commits)
  cxgb3: Fix crash caused by stashing wrong netdev_queue
  ixgbe: Fix coexistence of FCoE and Flow Director in 82599
  memory barrier: adding smp_mb__after_lock
  net: adding memory barrier to the poll and receive callbacks
  netpoll: Fix carrier detection for drivers that are using phylib
  includecheck fix: include/linux, rfkill.h
  p54: tx refused but queue active
  Atheros Kconfig needs to be dependent on WLAN_80211
  mac80211: fix docbook
  mac80211_hwsim: avoid NULL access
  ssb: Add support for 4318E
  b43: Add support for 4318E
  zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b device
  zd1211rw: 07b8:6001 is a ZD1211B
  r6040: bump driver version to 0.24 and date to 08 July 2009
  r6040: restore MIER register correctly when IRQ line is shared
  ipv4: Fix fib_trie rebalancing, part 4 (root thresholds)
  davinci_emac: fix kernel oops when changing MAC address while interface is down
  igb: set lan id prior to configuring phy
  mac80211: minstrel: avoid accessing negative indices in rix_to_ndx()
  ...

11 years agoFix compile error in bmac.c
Dave Jones [Fri, 10 Jul 2009 01:54:39 +0000]
Fix compile error in bmac.c

Looks like the change in ad361c9884e809340f6daca80d56a9e9c871690a
wasn't compile tested.

Signed-off-by: Dave Jones <davej@redhat.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agox86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon
Robert Richter [Tue, 23 Jun 2009 09:48:14 +0000]
x86/oprofile: rename kernel parameter for architectural perfmon to arch_perfmon

The short name of the achitecture is 'arch_perfmon'. This patch
changes the kernel parameter to use this name.

Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agocxgb3: Fix crash caused by stashing wrong netdev_queue
Roland Dreier [Thu, 9 Jul 2009 09:30:25 +0000]
cxgb3: Fix crash caused by stashing wrong netdev_queue

Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how
cxgb3 looks up the netdev_queue it stashes away in a qset during
initialization.  For multiport devices, the TX queue index it uses is
offset by the first_qset index of each port.  This leads to a crash
once LLTX is removed, since hard_start_xmit is called with one TX
queue lock held, while the TX reclaim timer task grabs a different
(wrong) TX queue lock when it frees skbs.

Fix this by removing the first_qset offset used to look up the TX
queue passed into t3_sge_alloc_qset() from setup_sge_qsets().

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Acked-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoixgbe: Fix coexistence of FCoE and Flow Director in 82599
Yi Zou [Thu, 9 Jul 2009 02:29:50 +0000]
ixgbe: Fix coexistence of FCoE and Flow Director in 82599

Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR)
in 82599 and remove the disabling of FDIR when FCoE is enabled.

Currently, FDIR is turned off when FCoE is enabled under the assumption that
FCoE is always enabled with DCB being turned on. However, FDIR does not have
to be turned off all the time when FCoE is enabled since FCoE can be enabled
without DCB being turned on, e.g., use link pause only. This patch makes sure
that when DCB is turned on or off, FDIR is turned on or off correspondingly;
and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR
set up properly so FCoE and FDIR can coexist regardless of DCB being on or off.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agomemory barrier: adding smp_mb__after_lock
Jiri Olsa [Wed, 8 Jul 2009 12:10:31 +0000]
memory barrier: adding smp_mb__after_lock

Adding smp_mb__after_lock define to be used as a smp_mb call after
a lock.

Making it nop for x86, since {read|write|spin}_lock() on x86 are
full memory barriers.

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: adding memory barrier to the poll and receive callbacks
Jiri Olsa [Wed, 8 Jul 2009 12:09:13 +0000]
net: adding memory barrier to the poll and receive callbacks

Adding memory barrier after the poll_wait function, paired with
receive callbacks. Adding fuctions sock_poll_wait and sk_has_sleeper
to wrap the memory barrier.

Without the memory barrier, following race can happen.
The race fires, when following code paths meet, and the tp->rcv_nxt
and __add_wait_queue updates stay in CPU caches.

CPU1                         CPU2

sys_select                   receive packet
  ...                        ...
  __add_wait_queue           update tp->rcv_nxt
  ...                        ...
  tp->rcv_nxt check          sock_def_readable
  ...                        {
  schedule                      ...
                                if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
                                        wake_up_interruptible(sk->sk_sleep)
                                ...
                             }

If there was no cache the code would work ok, since the wait_queue and
rcv_nxt are opposit to each other.

Meaning that once tp->rcv_nxt is updated by CPU2, the CPU1 either already
passed the tp->rcv_nxt check and sleeps, or will get the new value for
tp->rcv_nxt and will return with new data mask.
In both cases the process (CPU1) is being added to the wait queue, so the
waitqueue_active (CPU2) call cannot miss and will wake up CPU1.

The bad case is when the __add_wait_queue changes done by CPU1 stay in its
cache, and so does the tp->rcv_nxt update on CPU2 side.  The CPU1 will then
endup calling schedule and sleep forever if there are no more data on the
socket.

Calls to poll_wait in following modules were ommited:
net/bluetooth/af_bluetooth.c
net/irda/af_irda.c
net/irda/irnet/irnet_ppp.c
net/mac80211/rc80211_pid_debugfs.c
net/phonet/socket.c
net/rds/af_rds.c
net/rfkill/core.c
net/sunrpc/cache.c
net/sunrpc/rpc_pipe.c
net/tipc/socket.c

Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agocifs: when ATTR_READONLY is set, only clear write bits on non-directories
Jeff Layton [Thu, 9 Jul 2009 05:46:44 +0000]
cifs: when ATTR_READONLY is set, only clear write bits on non-directories

cifs: when ATTR_READONLY is set, only clear write bits on non-directories

On windows servers, ATTR_READONLY apparently either has no meaning or
serves as some sort of queue to certain applications for unrelated
behavior. This MS kbase article has details:

http://support.microsoft.com/kb/326549/

Don't clear the write bits directory mode when ATTR_READONLY is set.

Reported-by: pouchat@peewiki.net
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

11 years agocifs: remove cifsInodeInfo->inUse counter
Jeff Layton [Thu, 9 Jul 2009 05:46:39 +0000]
cifs: remove cifsInodeInfo->inUse counter

cifs: remove cifsInodeInfo->inUse counter

It was purported to be a refcounter of some sort, but was never
used that way. It never served any purpose that wasn't served equally well
by the I_NEW flag.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>

11 years agocifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget
Jeff Layton [Thu, 9 Jul 2009 05:46:37 +0000]
cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget

cifs: convert cifs_get_inode_info and non-posix readdir to use cifs_iget

Rather than allocating an inode and filling it out, have
cifs_get_inode_info fill out a cifs_fattr and call cifs_iget. This means
a pretty hefty reorganization of cifs_get_inode_info.

For the readdir codepath, add a couple of new functions for filling out
cifs_fattr's from different FindFile response infolevels.

Finally, remove cifs_new_inode since there are no more callers.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve French <sfrench@us.ibm.com>

11 years agodrm/i915: Check the LID device to decide whether the LVDS should be initialized
Zhao Yakui [Fri, 26 Jun 2009 01:46:18 +0000]
drm/i915: Check the LID device to decide whether the LVDS should be initialized

On some boxes the mobile chipset is used and there is no LVDS device. In such
case we had better not initialize the LVDS output device so that one pipe can
be used for other output device. For example: E-TOP.

But unfortunately the LVDS device is still initialized on the boxes based on
mobile chipset in KMS mode. It brings that this pipe occupied by LVDS can't be
used for other output device.

After checking the acpidump we find that there is no LID device on such boxes.
In such case we can use the LID device to decide whether the LVDS device should
be initialized.

If there is no LID device, we can think that there is no LVDS device. It is
unnecessary to initialize the LVDS output device.
If there exists the LID device, it will continue the current flowchart.

Maybe on some boxes there is no LVDS device but the LID device is found. In
such case it should be added to the quirk list.

http://bugs.freedesktop.org/show_bug.cgi?id=21496
http://bugs.freedesktop.org/show_bug.cgi?id=21856
http://bugs.freedesktop.org/show_bug.cgi?id=21127

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: squashed in style fixups]
Signed-off-by: Eric Anholt <eric@anholt.net>

11 years ago[CIFS] update cifs version number
Steve French [Thu, 9 Jul 2009 22:51:38 +0000]
[CIFS] update cifs version number

Signed-off-by: Steve French <sfrench@us.ibm.com>

11 years agocifs: add and use CIFSSMBUnixSetFileInfo for setattr calls
Jeff Layton [Fri, 10 Jul 2009 00:02:50 +0000]
cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls

cifs: add and use CIFSSMBUnixSetFileInfo for setattr calls

When there's an open filehandle, SET_FILE_INFO is apparently preferred
over SET_PATH_INFO. Add a new variant that sets a FILE_UNIX_INFO_BASIC
infolevel via SET_FILE_INFO and switch cifs_setattr_unix to use the
new call when there's an open filehandle available.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

11 years agocifs: make a separate function for filling out FILE_UNIX_BASIC_INFO
Jeff Layton [Fri, 10 Jul 2009 00:02:49 +0000]
cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO

cifs: make a separate function for filling out FILE_UNIX_BASIC_INFO

The SET_FILE_INFO variant will need to do the same thing here. Break
this code out into a separate function that both variants can call.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

11 years agocifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo
Jeff Layton [Fri, 10 Jul 2009 00:02:49 +0000]
cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo

cifs: rename CIFSSMBUnixSetInfo to CIFSSMBUnixSetPathInfo

...in preparation of adding a SET_FILE_INFO variant.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

11 years agocifs: add pid of initiating process to spnego upcall info
Jeff Layton [Fri, 10 Jul 2009 00:02:48 +0000]
cifs: add pid of initiating process to spnego upcall info

cifs: add pid of initiating process to spnego upcall info

This will allow the upcall to poke in /proc/<pid>/environ and get
the value of the $KRB5CCNAME env var for the process.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

11 years ago[WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF support
Slobodan Tomić [Sun, 28 Jun 2009 19:20:36 +0000]
[WATCHDOG] w83627hf_wdt.c: add support for the W83627EHF support

Add support for the W83627EHF/EF and W83627EHG/EG chipsets.

Signed-off-by: Slobodan Tomić <stomic@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years ago[WATCHDOG] SA1100 watchdog maximum timeout
Raphael Assenat [Mon, 29 Jun 2009 17:56:52 +0000]
[WATCHDOG] SA1100 watchdog maximum timeout

This patch replaces the hardcoded 255 seconds limit for a real limit based on
oscr_freq.

Also, the 'firmware_version' field is changed to '1' to allow the user
space application to easily detect that this driver supports a higher
maximum timeout.

Signed-off-by: Raphael Assenat <raph@8D.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years ago[WATCHDOG] w83697ug, fix lock imbalance
Jiri Slaby [Mon, 29 Jun 2009 16:00:39 +0000]
[WATCHDOG] w83697ug, fix lock imbalance

Don't forget to unlock io_lock when w83697ug_select_wd_register fails in
wdt_ctrl.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years ago[WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolons
Joe Perches [Sun, 28 Jun 2009 16:26:57 +0000]
[WATCHDOG] drivers/watchdog/bcm47xx_wdt.c: Remove unnecessary semicolons

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

11 years agoALSA: hda - targa and targa-2ch fix
David Heidelberger [Thu, 9 Jul 2009 16:45:46 +0000]
ALSA: hda - targa and targa-2ch fix

Simplify ALC882_TARGA and return gpio3 to ALC883_TARGA_DIG and
ALC883_TARGA_2ch_DIG, which I accidentally removed in commit id
64a8be74357477558183b43156c5536b642de134

Signed-off-by: David Heidelberger <d.okias@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

11 years agokmemleak: Remove alloc_bootmem annotations introduced in the past
Catalin Marinas [Tue, 7 Jul 2009 09:33:01 +0000]
kmemleak: Remove alloc_bootmem annotations introduced in the past

kmemleak_alloc() calls were added in some places where alloc_bootmem was
called. Since now kmemleak tracks bootmem allocations, these explicit
calls should be run.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>

11 years agoALSA: hda - fix beep tone calculation for IDT/STAC codecs
Paul Vojta [Thu, 9 Jul 2009 06:57:46 +0000]
ALSA: hda - fix beep tone calculation for IDT/STAC codecs

In the beep tone calculation for IDT/STAC codecs, lower numbers correspond
to higher frequencies and vice versa.  The current code has this backwards,
resulting in beep frequencies which are way too high (and sound bad on
tinny laptop speakers, resulting in complaints).

[Also added hz <= 0 check by tiwai]

Signed-off-by: Paul Vojta <vojta@math.berkeley.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

11 years agoUBIFS: fix corruption dump
Artem Bityutskiy [Mon, 29 Jun 2009 16:27:14 +0000]
UBIFS: fix corruption dump

In the 'ubifs_recover_leb()' function, when we find corrupted
empty space, we dump 8K starting from the offset where the last
node ends. This is OK if the corrupted empty space is somewhere
near that offset. But if the corruption is far at the end of the
LEB, we will dump all 0xFF bytes and complitely ignore the
interesting data. This is observed on a PPC ("kilauea") with
NOR flash.

This patch changes the behavior and teaches UBIFS to print only
interesting data. I.e., now we find where corruption starts and
start dumping from that offset.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>

11 years agoUBIFS: clean up free space checking
Artem Bityutskiy [Mon, 29 Jun 2009 15:58:34 +0000]
UBIFS: clean up free space checking

recovery.c has 'is_empty()' helper and it is better to use
this helper instead of re-implementing it in several places.
This patch does this and removes some amount of unneeded code.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>

11 years agoUBIFS: small amendments in the LEB scanning code
Artem Bityutskiy [Mon, 29 Jun 2009 14:59:23 +0000]
UBIFS: small amendments in the LEB scanning code

This patch fixes few minor things I've spotted while going through
code:

1. Better document return codes
2. If 'ubifs_scan_a_node()' returns some thing we do not expect,
   treat this as an error.
3. Try to do recovery only when 'ubifs_scan()' returns %-EUCLEAN,
   not on any error.
4. If empty space starts at a non-aligned address, print a message.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>

11 years agoUBIFS: dump a little more in case of corruptions
Artem Bityutskiy [Mon, 29 Jun 2009 13:25:33 +0000]
UBIFS: dump a little more in case of corruptions

In case of corruptions, dump 8192 bytes instead of 4096. The
largest node is 4096+ bytes, so it is better to see a node
boundary, which is not always possible when only 4096 bytes
are printed.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reviewed-by: Adrian Hunter <Adrian.Hunter@nokia.com>

11 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Thu, 9 Jul 2009 03:59:13 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix compile failure in cpufreq.c

11 years agonetpoll: Fix carrier detection for drivers that are using phylib
Anton Vorontsov [Thu, 9 Jul 2009 03:09:44 +0000]
netpoll: Fix carrier detection for drivers that are using phylib

Using early netconsole and gianfar driver this error pops up:

  netconsole: timeout waiting for carrier

It appears that net/core/netpoll.c:netpoll_setup() is using
cond_resched() in a loop waiting for a carrier.

The thing is that cond_resched() is a no-op when system_state !=
SYSTEM_RUNNING, and so drivers/net/phy/phy.c's state_queue is never
scheduled, therefore link detection doesn't work.

I belive that the main problem is in cond_resched()[1], but despite
how the cond_resched() story ends, it might be a good idea to call
msleep(1) instead of cond_resched(), as suggested by Andrew Morton.

[1] http://lkml.org/lkml/2009/7/7/463

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Thu, 9 Jul 2009 01:13:13 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

11 years agofealnx: Fix build breakage -- PR_CONT should be KERN_CONT
Roland Dreier [Thu, 9 Jul 2009 00:05:32 +0000]
fealnx: Fix build breakage -- PR_CONT should be KERN_CONT

Commit ad361c98 ("Remove multiple KERN_ prefixes from printk formats")
broke the build for fealnx because it added some "printk(PR_CONT ..."
calls, when PR_CONT doesn't exist; it should be "printk(KERN_CONT ..."

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago[CPUFREQ] Fix compile failure in cpufreq.c
Dave Jones [Wed, 8 Jul 2009 20:14:23 +0000]
[CPUFREQ] Fix compile failure in cpufreq.c

managed_policy is out of scope for the non-smp case.
Declare it locally where used (twice)

Signed-off-by: Dave Jones <davej@redhat.com>