12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 12 Jul 2007 20:46:48 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/selinux-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  security: unexport mmap_min_addr
  SELinux: use SECINITSID_NETMSG instead of SECINITSID_UNLABELED for NetLabel
  security: Protection for exploiting null dereference using mmap
  SELinux: Use %lu for inode->i_no when printing avc
  SELinux: allow preemption between transition permission checks
  selinux: introduce schedule points in policydb_destroy()
  selinux: add selinuxfs structure for object class discovery
  selinux: change sel_make_dir() to specify inode counter.
  selinux: rename sel_remove_bools() for more general usage.
  selinux: add support for querying object classes and permissions from the running policy

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Thu, 12 Jul 2007 20:42:43 +0000]
Merge /pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Fix sysfs_create_file return value handling
  [CPUFREQ] ondemand: fix tickless accounting and software coordination bug
  [CPUFREQ] ondemand: add a check to avoid negative load calculation
  [CPUFREQ] Keep userspace governor quiet when it is not being used
  [CPUFREQ] Longhaul - Proper register access
  [CPUFREQ] Kconfig powernow-k8 driver should depend on ACPI P-States driver
  [CPUFREQ] Longhaul - Replace ACPI functions with direct I/O
  [CPUFREQ] Longhaul - Remove duplicate multipliers
  [CPUFREQ] Longhaul - Embedded "conservative"
  [CPUFREQ] acpi-cpufreq: Proper ReadModifyWrite of PERF_CTL MSR
  [CPUFREQ] check return value of sysfs_create_file
  [CPUFREQ] Longhaul - Check ACPI "BM DMA in progress" bit
  [CPUFREQ] Longhaul - Move old_ratio to correct place
  [CPUFREQ] Longhaul - VT8237 support
  [CPUFREQ] Longhaul - Use all kinds of support
  [CPUFREQ] powernow-k8: clarify number of cores.

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
Linus Torvalds [Thu, 12 Jul 2007 20:41:54 +0000]
Merge /pub/scm/linux/kernel/git/davej/agpgart

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] Hand off AGP maintainence.

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Thu, 12 Jul 2007 20:41:29 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] Support multiple CPUs going through OS_MCA
  [IA64] silence GCC ia64 unused variable warnings
  [IA64] prevent MCA when performing MMIO mmap to PCI config space
  [IA64] add sn_register_pmi_handler oemcall
  [IA64] Stop bit for brl instruction
  [IA64] SN: Correct ROM resource length for BIOS copy
  [IA64] Don't set psr.ic and psr.i simultaneously

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Thu, 12 Jul 2007 20:40:57 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits)
  PCI: Only build PCI syscalls on architectures that want them
  PCI: limit pci_get_bus_and_slot to domain 0
  PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure
  PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge
  PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3
  PCI: hotplug: pciehp: wait for 1 second after power off slot
  PCI: pci_set_power_state(): check for PM capabilities earlier
  PCI: cpci_hotplug: Convert to use the kthread API
  PCI: add pci_try_set_mwi
  PCI: pcie: remove SPIN_LOCK_UNLOCKED
  PCI: ROUND_UP macro cleanup in drivers/pci
  PCI: remove pci_dac_dma_... APIs
  PCI: pci-x-pci-express-read-control-interfaces cleanups
  PCI: Fix typo in include/linux/pci.h
  PCI: pci_ids, remove double or more empty lines
  PCI: pci_ids, add atheros and 3com_2 vendors
  PCI: pci_ids, reorder some entries
  PCI: i386: traps, change VENDOR to DEVICE
  PCI: ATM: lanai, change VENDOR to DEVICE
  PCI: Change all drivers to use pci_device->revision
  ...

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Thu, 12 Jul 2007 20:40:20 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6: (61 commits)
  sysfs: add parameter "struct bin_attribute *" in .read/.write methods for sysfs binary attributes
  sysfs: make directory dentries and inodes reclaimable
  sysfs: implement sysfs_get_dentry()
  sysfs: move sysfs_drop_dentry() to dir.c and make it static
  sysfs: restructure add/remove paths and fix inode update
  sysfs: use sysfs_mutex to protect the sysfs_dirent tree
  sysfs: consolidate sysfs spinlocks
  sysfs: make kobj point to sysfs_dirent instead of dentry
  sysfs: implement sysfs_find_dirent() and sysfs_get_dirent()
  sysfs: implement SYSFS_FLAG_REMOVED flag
  sysfs: rename sysfs_dirent->s_type to s_flags and make room for flags
  sysfs: make sysfs_drop_dentry() access inodes using ilookup()
  sysfs: Fix oops in sysfs_drop_dentry on x86_64
  sysfs: use singly-linked list for sysfs_dirent tree
  sysfs: slim down sysfs_dirent->s_active
  sysfs: move s_active functions to fs/sysfs/dir.c
  sysfs: fix root sysfs_dirent -> root dentry association
  sysfs: use iget_locked() instead of new_inode()
  sysfs: reorganize sysfs_new_indoe() and sysfs_create()
  sysfs: fix parent refcounting during rename and move
  ...

12 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Thu, 12 Jul 2007 20:38:50 +0000]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: (21 commits)
  libata: remove irq_on from ata_bus_reset() and ata_std_postreset()
  ata_piix: kill incorrect invalid map value warning
  libata: add another Maxtor drive with broken NCQ to the list
  [libata] sata_mv: Fix and clean up per-chip-generation tests
  [libata] sata_mv: Convert to new exception handling (EH) infrastructure
  [libata] sata_mv: minor bug fixes, enhancements, and cleanups (prep for new EH)
  [libata] sata_mv: Minor cleanups and renaming, preparing for new EH & NCQ
  libata-link: add PMP related ATA constants
  libata-link: separate out ata_eh_handle_dev_fail()
  pata_hpt3x3: fix DMA Kconfig option to actually have a hope of working
  Add Hitachi HDS7250SASUN500G 0621KTAWSD to NCQ blacklist
  pata_scc.c: Workaround for errata A308
  libata: add FUJITSU MHV2080BH to NCQ blacklist
  pata_hpt3x3: major reworking and testing
  libata: clean up horkage handling
  libata: quirk IOMEGA ZIP 250 ATAPI FLOPPY
  libata: simplify PCI legacy SFF host handling
  pata_mpc52xx: suspend/resume support
  sata_promise: SATA hotplug support, take 2
  pata_sis: FIFO whack
  ...

12 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 12 Jul 2007 20:31:22 +0000]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (183 commits)
  [TG3]: Update version to 3.78.
  [TG3]: Add missing NVRAM strapping.
  [TG3]: Enable auto MDI.
  [TG3]: Fix the polarity bit.
  [TG3]: Fix irq_sync race condition.
  [NET_SCHED]: ematch: module autoloading
  [TCP]: tcp probe wraparound handling and other changes
  [RTNETLINK]: rtnl_link: allow specifying initial device address
  [RTNETLINK]: rtnl_link API simplification
  [VLAN]: Fix MAC address handling
  [ETH]: Validate address in eth_mac_addr
  [NET]: Fix races in net_rx_action vs netpoll.
  [AF_UNIX]: Rewrite garbage collector, fixes race.
  [NETFILTER]: {ip, nf}_conntrack_sctp: fix remotely triggerable NULL ptr dereference (CVE-2007-2876)
  [NET]: Make all initialized struct seq_operations const.
  [UDP]: Fix length check.
  [IPV6]: Remove unneeded pointer idev from addrconf_cleanup().
  [DECNET]: Another unnecessary net/tcp.h inclusion in net/dn.h
  [IPV6]: Make IPV6_{RECV,2292}RTHDR boolean options.
  [IPV6]: Do not send RH0 anymore.
  ...

Fixed up trivial conflict in Documentation/feature-removal-schedule.txt
manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Thu, 12 Jul 2007 20:28:54 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Rename PC speaker code
  [MIPS] Don't use genrtc.
  [MIPS] Remove unused time.c for swarm
  [MIPS] Sparse: Use NULL for pointer
  [MIPS] Fix a sparse warning in arch/mips/pci/pci.c
  [MIPS] SMTC: Interrupt mask backstop hack
  [MIPS] separate platform_device registration for VR41xx RTC
  [MIPS] Separate platform_device registration for VR41xx GPIO
  [MIPS] MIPSsim: Fix build.
  [MIPS] separate platform_device registration for VR41xx serial interface
  [MIPS] Include cacheflush.h in uncache.c
  [MIPS] Cleanup tlbdebug.h
  [MIPS] Change names of local variables to silence sparse (part 2)
  [MIPS] Workaround for a sparse warning in include/asm-mips/io.h
  [MIPS] RM: Use only phyiscal address for 82596 and 53c710
  [MIPS] Hydrogen3: Remove remaining bits of code.
  [MIPS] DEC: Fix modpost warning.
  Revert "[MIPS] DEC: Fix modpost warning."
  [MIPS] Fix resume for 64K page size on R4000 class processors.

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6
Linus Torvalds [Thu, 12 Jul 2007 20:25:24 +0000]
Merge /linux/kernel/git/cooloney/blackfin-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/cooloney/blackfin-2.6: (30 commits)
  Blackfin serial driver: supporting BF548-EZKIT serial port
  Video Console: Blackfin doesnt support VGA console
  Blackfin arch: Add peripheral io API to gpio header file
  Blackfin arch: set up gpio interrupt IRQ_PJ9 for BF54x ATAPI PATA driver
  Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging
  Blackfin arch: as pointed out by Robert P. J. Day, update the CPU_FREQ name to match current Kconfig
  Blackfin arch: extract the entry point from the linked kernel
  Blackfin arch: clean up some coding style issues
  Blackfin arch: combine the common code of free_initrd_mem and free_initmem
  Blackfin arch: Add Support for Peripheral PortMux and resouce allocation
  Blackfin arch: use PAGE_SIZE when doing aligns rather than hardcoded values
  Blackfin arch: fix bug set dma_address properly in dma_map_sg
  Blackfin arch: Disable CACHELINE_ALIGNED_L1 for BF54x by default
  Blackfin arch: Port the dm9000 driver to Blackfin by using the correct low-level io routines
  Blackfin arch: There is no CDPRIO Bit in the EBIU_AMGCTL Register of BF54x arch
  Blackfin arch: scrub dead code
  Blackfin arch: Fix Warning add some defines in BF54x header file
  Blackfin arch: add BF54x missing GPIO access functions
  Blackfin arch: Some memory and code optimizations - Fix SYS_IRQS
  Blackfin arch: Enable BF54x PIN/GPIO interrupts
  ...

12 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Thu, 12 Jul 2007 20:25:00 +0000]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (26 commits)
  i2c-rpx: Remove
  i2c-mpc: work around missing-9th-clock-pulse bug
  i2c: New PMC MSP71xx TWI bus driver
  i2c-savage4: Delete many unused defines
  i2c/tsl2550: Speed up initialization
  i2c: New bus driver for the TAOS evaluation modules
  i2c-i801: Use the internal 32-byte buffer on ICH4+
  i2c-i801: Various cleanups
  i2c: Add support for the TSL2550
  i2c-pxa: Support new-style I2C drivers
  i2c-gpio: Make some internal functions static
  i2c-gpio: Add support for new-style clients
  i2c-iop3xx: Switch to static adapter numbering
  i2c-sis5595: Resolve resource conflict with sis5595
  matroxfb: Clean-up i2c header inclusions
  i2c-nforce2: Add support for SMBus block transactions
  i2c-mpc: Use i2c_add_numbered_adapter
  i2c-mv64xxx: Use i2c_add_numbered_adapter
  i2c-piix4: Add support for the ATI SB700
  i2c: New DS1682 chip driver
  ...

12 years agolibata: remove irq_on from ata_bus_reset() and ata_std_postreset()
Albert Lee [Sat, 7 Jul 2007 07:00:37 +0000]
libata: remove irq_on from ata_bus_reset() and ata_std_postreset()

  It seems irq_on() in ata_bus_reset() and ata_std_postreset()
are leftover of the EDD reset. Remove them.

Signed-off-by: Albert Lee <albertcc@tw.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoata_piix: kill incorrect invalid map value warning
Tejun Heo [Tue, 10 Jul 2007 08:58:21 +0000]
ata_piix: kill incorrect invalid map value warning

The last two slots of MAP 00b of ich6m was incorrectly marked as
reserved.  This is left over from converting the entry to allow 00b.
This causes no real problem.  It only makes the driver print annoying
warning message.  Fix it.

[patch also proferred by Pierre Tardy at the end of 2006 -jg]

Signed-off-by: Tejun Heo <htejun@gmail.com>
--
 drivers/ata/ata_piix.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agolibata: add another Maxtor drive with broken NCQ to the list
Chuck Ebbert [Thu, 12 Jul 2007 18:37:19 +0000]
libata: add another Maxtor drive with broken NCQ to the list

Add another Maxtor 6B200M0 drive with broken NCQ to the list.

Signed-off-by: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[libata] sata_mv: Fix and clean up per-chip-generation tests
Jeff Garzik [Thu, 12 Jul 2007 19:51:22 +0000]
[libata] sata_mv: Fix and clean up per-chip-generation tests

Due to a mistake in test logic, Gen-IIE chips were being treated as
Gen-II chips in some cases.  Fix this, and in the process, clean up
IS_50XX/IS_60XX tests to the more uniform IS_GEN_{I,II,IIE} tests.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[libata] sata_mv: Convert to new exception handling (EH) infrastructure
Jeff Garzik [Thu, 12 Jul 2007 18:34:26 +0000]
[libata] sata_mv: Convert to new exception handling (EH) infrastructure

This makes hotplug, NCQ, etc. possible, and removes one of the few
remaining old-EH drivers.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years ago[libata] sata_mv: minor bug fixes, enhancements, and cleanups (prep for new EH)
Jeff Garzik [Thu, 12 Jul 2007 18:30:19 +0000]
[libata] sata_mv: minor bug fixes, enhancements, and cleanups (prep for new EH)

* Continue replacing "CONSTANT & var" tests with "var & CONSTANT"
* Don't clear EDMA_CFG_NCQ_GO_ON_ERR on Gen-IIE, where that bit does
  not exist
* Set I/O Id field in descriptor, where present.  Appears to work
  fine on all versions, even though queueing is still disabled.
* call pci_set_mwi(), to (a) make sure cacheline size is set properly,
  and (b) enable MWI transactions
* Remove never-used handling of coalescing interrupt bits (these events
  are always masked)

Signed-off-by: Jeff Garzik <jeff@garzik.org>

12 years agoRemove old i386 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:58 +0000]
Remove old i386 setup code

This removes the old i386 setup code.  This is done as a separate patch
to avoid breaking git bisect as some of the i386 code was also used by
the old x86-64 code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoUse the new x86 setup code for x86-64; unify with i386
H. Peter Anvin [Wed, 11 Jul 2007 19:18:57 +0000]
Use the new x86 setup code for x86-64; unify with i386

This unifies arch/*/boot (except arch/*/boot/compressed) between
i386 and x86-64, and uses the new x86 setup code for x86-64 as well.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoUse the new x86 setup code for i386
H. Peter Anvin [Wed, 11 Jul 2007 19:18:56 +0000]
Use the new x86 setup code for i386

This patch hooks the new x86 setup code into the Makefile machinery.  It
also adapts boot/tools/build.c to a two-file (as opposed to three-file)
universe, and simplifies it substantially.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoLinker script for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:55 +0000]
Linker script for the new x86 setup code

Linker script to define the layout of the new x86 setup code.
Includes assert for size overflow and a misaligned setup header.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoAssembly header and main routine for new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:54 +0000]
Assembly header and main routine for new x86 setup code

The assembly header and initialization code, and the main() routine.
main.c also contains some miscellaneous very short routines.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoCode for actual protected-mode entry
H. Peter Anvin [Wed, 11 Jul 2007 19:18:53 +0000]
Code for actual protected-mode entry

This is the code which actually does the switch to protected mode,
including all preparation.  It is also responsible for invoking the
boot loader hooks, if present.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoVideo mode probing support for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:52 +0000]
Video mode probing support for the new x86 setup code

Video mode probing for the new x86 setup code.  This code breaks down
different drivers into modules.  This code deliberately drops support
for a lot of the vendor-specific mode probing present in the assembly
version, since a lot of those probes have been found to be stale in
current versions of those chips -- frequently, support for those modes
have been dropped from recent video BIOSes due to space constraints,
but the video BIOS signatures are still the same.

However, additional drivers should be extremely straightforward to plug
in, if desirable.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoVoyager support for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:51 +0000]
Voyager support for the new x86 setup code

Voyager support for the new x86 setup code.  This implements the same
functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMemory probing support for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:50 +0000]
Memory probing support for the new x86 setup code

Probe memory (INT 15h: E820, E801, 88).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMCA support for new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:49 +0000]
MCA support for new x86 setup code

MCA probing support for the new x86 setup code.  This implements the
same functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoEDD probing code for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:48 +0000]
EDD probing code for the new x86 setup code

Probe EDD and MBR signatures, in order to make it easier to map
physical hard drives to BIOS drives.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoCPU features verification for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:47 +0000]
CPU features verification for the new x86 setup code

Verify that the CPU has enough features to run the kernel.  This may
entail enabling features on some CPUs.

By doing this in the setup code we can be guaranteed to still be able to
write to the console through the BIOS.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoVersion string for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:46 +0000]
Version string for the new x86 setup code

Module which only includes the kernel version string.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoConsole-writing code for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:45 +0000]
Console-writing code for the new x86 setup code

This implements writing text to the console, including printf().

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoCommand-line parsing code for the new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:44 +0000]
Command-line parsing code for the new x86 setup code

Simple command-line parser which allows us to access the kernel command
line from the setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoAPM probing code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:43 +0000]
APM probing code

APM probing code for the new x86 setup code.  This implements the
same functionality as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoA20 handling code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:42 +0000]
A20 handling code

A20 handling code for the new x86 setup code.  This implements the same
algorithms as the assembly version.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoString-handling functions for the new x86 setup code.
H. Peter Anvin [Wed, 11 Jul 2007 19:18:41 +0000]
String-handling functions for the new x86 setup code.

strcmp(), memcpy(), memset(), as well as routines to copy to and from
other segments (as pointed to by fs and gs).

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoSimple bitops for the new x86 setup code.
H. Peter Anvin [Wed, 11 Jul 2007 19:18:40 +0000]
Simple bitops for the new x86 setup code.

A simple collection of bitops for the new x86 setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoTop header file for new x86 setup code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:39 +0000]
Top header file for new x86 setup code

Top header file for the new x86 setup code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoHeader file to produce 16-bit code with gcc
H. Peter Anvin [Wed, 11 Jul 2007 19:18:38 +0000]
Header file to produce 16-bit code with gcc

gcc for i386 can be used with the assembly prefix ".code16gcc" to generate
16-bit (real-mode) code.  This header file provides the assembly prefix.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86-64: add symbolic constants for the boot segment selectors
H. Peter Anvin [Wed, 11 Jul 2007 19:18:37 +0000]
x86-64: add symbolic constants for the boot segment selectors

Add symbolic constants for the segment selectors/GDT slots used by
the setup code, for consistency with i386.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86-64: add CONFIG_PHYSICAL_ALIGN for consistency with i386
H. Peter Anvin [Wed, 11 Jul 2007 19:18:36 +0000]
x86-64: add CONFIG_PHYSICAL_ALIGN for consistency with i386

Add CONFIG_PHYSICAL_ALIGN (currently as a hardcoded constant) to provide
consistency with i386.  This value is manifest in the bzImage header.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMake struct boot_params a real structure, and remove obsolete fields
H. Peter Anvin [Wed, 11 Jul 2007 19:18:35 +0000]
Make struct boot_params a real structure, and remove obsolete fields

Make struct boot_params a real structure, and remove the handling of
some obsolete fields, in particular hd*_info, which was only used by
the ST-506 driver, and likely to be wrong for that driver on any
modern BIOS.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMake definitions for struct e820entry and struct e820map consistent
H. Peter Anvin [Wed, 11 Jul 2007 19:18:34 +0000]
Make definitions for struct e820entry and struct e820map consistent

Make definitions for struct e820entry and struct e820map
consistent between i386 and x86-64.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoDefine zero-page offset 0x1e4 as a scratch field, and use it
H. Peter Anvin [Wed, 11 Jul 2007 19:18:33 +0000]
Define zero-page offset 0x1e4 as a scratch field, and use it

The relocatable kernel code needs a scratch field for the decompressor
to determine its own location.  It was using a location inside
struct screen_info; reserve a free location and document it as scratch
instead.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoUse a new CPU feature word to cover features that are spread around
Venki Pallipadi [Wed, 11 Jul 2007 19:18:32 +0000]
Use a new CPU feature word to cover features that are spread around

Some Intel features are spread around in different CPUID leafs like 0x5,
0x6 and 0xA.  Make this feature detection code common across i386 and
x86_64.

Display Intel Dynamic Acceleration feature in /proc/cpuinfo. This feature
will be enabled automatically by current acpi-cpufreq driver.

Refer to Intel Software Developer's Manual for more details about the feature.

Thanks to hpa (H Peter Anvin) for the making the actual code detecting the
scattered features data-driven.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoClean up struct screen_info (<linux/screen_info.h>)
H. Peter Anvin [Wed, 11 Jul 2007 19:18:31 +0000]
Clean up struct screen_info (<linux/screen_info.h>)

struct screen_info has unaligned members, it needs to be packed.
In the process, fix the naming of some of the members, which don't
belong in this structure but are part of it anyway.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86 Kconfig: change X86_MINIMUM_CPU_MODEL to X86_MINIMUM_CPU_FAMILY
H. Peter Anvin [Wed, 11 Jul 2007 19:18:30 +0000]
x86 Kconfig: change X86_MINIMUM_CPU_MODEL to X86_MINIMUM_CPU_FAMILY

The X86_MINIMUM_CPU_MODEL name isn't really right, so change it to
X86_MINIMUM_CPU_FAMILY.  Also, the default minimum should be 3, not 0.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoUnify the CPU features vectors between i386 and x86-64
H. Peter Anvin [Wed, 11 Jul 2007 19:18:29 +0000]
Unify the CPU features vectors between i386 and x86-64

Unify the handling of the CPU features vectors between i386 and x86-64.
This also adopts the collapsing of features which are required at
compile-time into constant tests from x86-64 to i386.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoinclude/asm-i386/boot.h: This is <asm/boot.h>, not <linux/boot.h>
H. Peter Anvin [Wed, 11 Jul 2007 19:18:28 +0000]
include/asm-i386/boot.h: This is <asm/boot.h>, not <linux/boot.h>

include/asm-i386/boot.h incorrectly has the multiple include guards
as _LINUX_BOOT_H instead of _ASM_BOOT_H.  Fix.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agohd.c: remove BIOS/CMOS queries
H. Peter Anvin [Wed, 11 Jul 2007 19:18:27 +0000]
hd.c: remove BIOS/CMOS queries

An ST-506 disk these days is pretty much someone trying to pull ancient
data using an auxilliary controller.  Pulling data from the BIOS or CMOS
is just plain wrong, since it's likely to be the primary OS disk... and
would be user-entered data anyway.  Instead, require the user enters it
on the command line.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agox86 setup: MAINTAINERS: formally take responsibility for the i386 boot code
H. Peter Anvin [Wed, 11 Jul 2007 19:18:26 +0000]
x86 setup: MAINTAINERS: formally take responsibility for the i386 boot code

Change MAINTAINERS to formally take responsibility for the i386 boot code.

Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[MIPS] Rename PC speaker code
Ralf Baechle [Thu, 12 Jul 2007 16:41:23 +0000]
[MIPS] Rename PC speaker code

While the PC speaker is wired up to the i8254 there is more to the i8254
than just the PC speaker so this code was getting in the way under its
current name.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Don't use genrtc.
Ralf Baechle [Thu, 12 Jul 2007 16:41:21 +0000]
[MIPS] Don't use genrtc.

The only pseudo-legitimate MIPS user of genrtc was a systems that doesn't
have an RTC in hardware at all.  At this point faking one is a little
pointless ...

12 years ago[MIPS] Remove unused time.c for swarm
Yoichi Yuasa [Thu, 7 Jun 2007 13:27:50 +0000]
[MIPS] Remove unused time.c for swarm

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Sparse: Use NULL for pointer
Atsushi Nemoto [Thu, 12 Jul 2007 16:49:49 +0000]
[MIPS] Sparse: Use NULL for pointer

This fixes a sparse warning:

arch/mips/kernel/traps.c:376:44: warning: Using plain integer as NULL pointer

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Fix a sparse warning in arch/mips/pci/pci.c
Atsushi Nemoto [Thu, 12 Jul 2007 16:26:52 +0000]
[MIPS] Fix a sparse warning in arch/mips/pci/pci.c

Fixes this warning:

arch/mips/pci/pci.c:284:18: warning: symbol 'dev' shadows an earlier one
arch/mips/pci/pci.c:272:17: originally declared here

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] SMTC: Interrupt mask backstop hack
Kevin D. Kissell [Thu, 12 Jul 2007 15:21:08 +0000]
[MIPS] SMTC: Interrupt mask backstop hack

To support multiple TC microthreads acting as "CPUs" within a VPE,
VPE-wide interrupt mask bits must be specially manipulated during
interrupt handling. To support legacy drivers and interrupt controller
management code, SMTC has a "backstop" to track and if necessary restore
the interrupt mask. This has some performance impact on interrupt service
overhead. Disable it only if you know what you are doing.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] separate platform_device registration for VR41xx RTC
Yoichi Yuasa [Fri, 11 May 2007 12:18:48 +0000]
[MIPS] separate platform_device registration for VR41xx RTC

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Separate platform_device registration for VR41xx GPIO
Yoichi Yuasa [Thu, 10 May 2007 13:21:35 +0000]
[MIPS] Separate platform_device registration for VR41xx GPIO

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] MIPSsim: Fix build.
Ralf Baechle [Thu, 12 Jul 2007 16:41:14 +0000]
[MIPS] MIPSsim: Fix build.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] separate platform_device registration for VR41xx serial interface
Yoichi Yuasa [Tue, 8 May 2007 15:03:02 +0000]
[MIPS] separate platform_device registration for VR41xx serial interface

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Include cacheflush.h in uncache.c
Atsushi Nemoto [Wed, 11 Jul 2007 15:55:40 +0000]
[MIPS] Include cacheflush.h in uncache.c

This fixes this sparse warning:

arch/mips/lib/uncached.c:38:22: warning: symbol 'run_uncached' was not declared. Should it be static?

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Cleanup tlbdebug.h
Atsushi Nemoto [Wed, 11 Jul 2007 15:51:00 +0000]
[MIPS] Cleanup tlbdebug.h

Also include tlbdebug.h in dump_tlb.c and r3k_dump_tlb.c.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Change names of local variables to silence sparse (part 2)
Atsushi Nemoto [Wed, 11 Jul 2007 14:30:40 +0000]
[MIPS] Change names of local variables to silence sparse (part 2)

This patch is an workaround for these sparse warnings:

include2/asm/mmu_context.h:172:2: warning: symbol 'flags' shadows an earlier one
include2/asm/mmu_context.h:133:16: originally declared here
include2/asm/mmu_context.h:232:2: warning: symbol 'flags' shadows an earlier one
include2/asm/mmu_context.h:203:16: originally declared here
include2/asm/mmu_context.h:277:3: warning: symbol 'flags' shadows an earlier one
include2/asm/mmu_context.h:250:16: originally declared here

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Workaround for a sparse warning in include/asm-mips/io.h
Atsushi Nemoto [Wed, 11 Jul 2007 14:12:00 +0000]
[MIPS] Workaround for a sparse warning in include/asm-mips/io.h

CKSEG1ADDR() returns unsigned int value on 32bit kernel.  Cast it to
unsigned long to get rid of this warning:

include2/asm/io.h:215:12: warning: cast adds address space to expression (<asn:2>)

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] RM: Use only phyiscal address for 82596 and 53c710
Thomas Bogendoerfer [Wed, 11 Jul 2007 17:10:39 +0000]
[MIPS] RM: Use only phyiscal address for 82596 and 53c710

Use physical address for 82596 and 53c710 base address

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Hydrogen3: Remove remaining bits of code.
Ralf Baechle [Thu, 12 Jul 2007 13:01:06 +0000]
[MIPS] Hydrogen3: Remove remaining bits of code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] DEC: Fix modpost warning.
Ralf Baechle [Tue, 10 Jul 2007 23:20:01 +0000]
[MIPS] DEC: Fix modpost warning.

  LD      vmlinux
  SYSMAP  System.map
  SYSMAP  .tmp_System.map
  MODPOST vmlinux
WARNING: drivers/built-in.o(.data+0x2480): Section mismatch: reference to .init.text: (between 'sercons' and 'ds_parms')

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years agoRevert "[MIPS] DEC: Fix modpost warning."
Ralf Baechle [Tue, 10 Jul 2007 23:07:34 +0000]
Revert "[MIPS] DEC: Fix modpost warning."

This reverts commit 8713762acf341edea9d25d6a4817f235c67bc004.

12 years ago[MIPS] Fix resume for 64K page size on R4000 class processors.
Ralf Baechle [Wed, 11 Jul 2007 07:32:21 +0000]
[MIPS] Fix resume for 64K page size on R4000 class processors.

Problem reported by Peter Watkins <pwatkins@sicortex.com> but this is
a different fix.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years agoi2c-rpx: Remove
Jean Delvare [Thu, 12 Jul 2007 12:12:32 +0000]
i2c-rpx: Remove

This driver has been broken forever. It depends on i2c-algo-8xx which
has never been in the mainline kernel.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-mpc: work around missing-9th-clock-pulse bug
Domen Puncer [Thu, 12 Jul 2007 12:12:31 +0000]
i2c-mpc: work around missing-9th-clock-pulse bug

Work around a problem reported on:
http://ozlabs.org/pipermail/linuxppc-embedded/2005-July/019038.html
Without this patch I2C on mpc5200 becomes unusable after a while.
Tested on mpc5200 boards by Matthias Fechner and me.

Signed-off-by: Domen Puncer <domen.puncer@telargo.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: New PMC MSP71xx TWI bus driver
Marc St-Jean [Thu, 12 Jul 2007 12:12:31 +0000]
i2c: New PMC MSP71xx TWI bus driver

Add TWI driver for the PMC-Sierra MSP71xx devices.

[JD: Drop the probe hack, don't set algo_data as we never use it, return
the right error code if the driver registration fails.]

Signed-off-by: Marc St-Jean <Marc_St-Jean@pmc-sierra.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-savage4: Delete many unused defines
Jean Delvare [Thu, 12 Jul 2007 12:12:31 +0000]
i2c-savage4: Delete many unused defines

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c/tsl2550: Speed up initialization
Jean Delvare [Thu, 12 Jul 2007 12:12:31 +0000]
i2c/tsl2550: Speed up initialization

There's some redundancy in the tsl2550 initialization sequence. It is
powering up the device twice, and setting the operating mode twice
too. Setting things just once saves SMBus transactions, which aren't
always cheap, speeding up the device initialization.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Rodolfo Giometti <giometti@linux.it>

12 years agoi2c: New bus driver for the TAOS evaluation modules
Jean Delvare [Thu, 12 Jul 2007 12:12:31 +0000]
i2c: New bus driver for the TAOS evaluation modules

This is a new I2C bus driver for the TAOS evaluation modules. Developped
and tested on the TAOS TSL2550 EVM.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-i801: Use the internal 32-byte buffer on ICH4+
Oleg Ryjkov [Thu, 12 Jul 2007 12:12:31 +0000]
i2c-i801: Use the internal 32-byte buffer on ICH4+

Add an ability to utilize the internal SRAM buffer on ICH4
and newer host controllers to speed up execution of block operations.

I've split the code so that it is more clear which block transaction is
performed.

First of all the host controller's type is identified. isich4 is set when
we think that the controller has the internal buffer. Then, before every
block transaction, if isich4 is set, we attempt to enable the E32B bit in
SMBAUXCTL register.

Signed-off-by: Oleg Ryjkov <olegr@google.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-i801: Various cleanups
Oleg Ryjkov [Thu, 12 Jul 2007 12:12:31 +0000]
i2c-i801: Various cleanups

* Use defines instead of raw numbers for register bits
* Fix several wrong indentations and trailing whitespace
* Move hwpec timeout checking to a separate function

Signed-off-by: Oleg Ryjkov <olegr@google.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Add support for the TSL2550
Rodolfo Giometti [Thu, 12 Jul 2007 12:12:30 +0000]
i2c: Add support for the TSL2550

Add support for Taos TSL2550 ambient light sensors.
(http://www.taosinc.com/product_detail.asp?cateid=4&proid=18).

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-pxa: Support new-style I2C drivers
Rodolfo Giometti [Thu, 12 Jul 2007 12:12:30 +0000]
i2c-pxa: Support new-style I2C drivers

Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-gpio: Make some internal functions static
Atsushi Nemoto [Thu, 12 Jul 2007 12:12:30 +0000]
i2c-gpio: Make some internal functions static

i2c_gpio_getsda() and i2c_gpio_getscl() are only used in this file.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-gpio: Add support for new-style clients
Atsushi Nemoto [Thu, 12 Jul 2007 12:12:30 +0000]
i2c-gpio: Add support for new-style clients

Use i2c_bit_add_numbered_bus() so that the i2c-gpio adapter works well
with new-style pre-declared devices.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-iop3xx: Switch to static adapter numbering
Martin Michlmayr [Thu, 12 Jul 2007 12:12:30 +0000]
i2c-iop3xx: Switch to static adapter numbering

Update the IOP3xx I2C driver to use i2c_add_numbered_adapter(), so that
later patches can convert boards to using new-style drivers.

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Tested-by: Voipio Riku <Riku.Voipio@movial.fi>
Cc: Dan J Williams <dan.j.williams@intel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-sis5595: Resolve resource conflict with sis5595
Jean Delvare [Thu, 12 Jul 2007 12:12:30 +0000]
i2c-sis5595: Resolve resource conflict with sis5595

Let the i2c-sis5595 driver release its PCI device after registering.
This is to allow the sis5595 hardware monitoring driver to also
access this PCI device. The same trick is already used in the
i2c-viapro and via686a drivers to let them both load.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agomatroxfb: Clean-up i2c header inclusions
Jean Delvare [Thu, 12 Jul 2007 12:12:30 +0000]
matroxfb: Clean-up i2c header inclusions

matroxfb_crtc2 has nothing to do with i2c, so there's no reason why
matroxfb_crtc2.h should include i2c header files.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Petr Vandrovec <vandrove@vc.cvut.cz>

12 years agoi2c-nforce2: Add support for SMBus block transactions
Oleg Ryjkov [Thu, 12 Jul 2007 12:12:29 +0000]
i2c-nforce2: Add support for SMBus block transactions

Add support for SMBus block read/write transactions to i2c-nforce2
driver, in particular to host controllers MCP51 and MCP55.

Signed-off-by: Oleg Ryjkov <olegr@google.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-mpc: Use i2c_add_numbered_adapter
Grant Likely [Thu, 12 Jul 2007 12:12:29 +0000]
i2c-mpc: Use i2c_add_numbered_adapter

Move the i2c-mpc driver over to using the new i2c infrastructure.
Specifically, it now uses i2c_add_numbered_adapter so that the bus number
can be determined ahead of time and used to register i2c clients before
the bus is instantiated.

Tested on an MPC5200 based board

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-mv64xxx: Use i2c_add_numbered_adapter
Dale Farnsworth [Thu, 12 Jul 2007 12:12:29 +0000]
i2c-mv64xxx: Use i2c_add_numbered_adapter

Convert the Marvell mv64xxx I2C driver to use the new i2c infrastructure,
by calling i2c_add_numbered_adapter().  This allows clients to be
registered before the bus is instantiated.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c-piix4: Add support for the ATI SB700
Henry Su [Thu, 12 Jul 2007 12:12:29 +0000]
i2c-piix4: Add support for the ATI SB700

Add the SMBus device ID for ATI SB700.

Signed-off-by: Henry Su <Henry.su@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: New DS1682 chip driver
Grant Likely [Thu, 12 Jul 2007 12:12:29 +0000]
i2c: New DS1682 chip driver

A driver for the Dallas DS1682 elapsed time recorder chip.

Tested on a MPC5200 based board using the integrated i2c adapter.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Fix the i2c_smbus_read_i2c_block_data() prototype
Jean Delvare [Thu, 12 Jul 2007 12:12:29 +0000]
i2c: Fix the i2c_smbus_read_i2c_block_data() prototype

Let the drivers specify how many bytes they want to read with
i2c_smbus_read_i2c_block_data(). So far, the block count was
hard-coded to I2C_SMBUS_BLOCK_MAX (32), which did not make much sense.
Many driver authors complained about this before, and I believe it's
about time to fix it. Right now, authors have to do technically stupid
things, such as individual byte reads or full-fledged I2C messaging,
to work around the problem. We do not want to encourage that.

I even found that some bus drivers (e.g. i2c-amd8111) already
implemented I2C block read the "right" way, that is, they didn't
follow the old, broken standard. The fact that it was never noticed
before just shows how little i2c_smbus_read_i2c_block_data() was used,
which isn't that surprising given how broken its prototype was so far.

There are some obvious compatiblity considerations:
* This changes the i2c_smbus_read_i2c_block_data() prototype. Users
  outside the kernel tree will notice at compilation time, and will
  have to update their code.
* User-space has access to i2c_smbus_xfer() directly using i2c-dev, so
  the changed expectations would affect tools such as i2cdump. In order
  to preserve binary compatibility, we give I2C_SMBUS_I2C_BLOCK_DATA
  a new numeric value, and define I2C_SMBUS_I2C_BLOCK_BROKEN with the
  old numeric value. When i2c-dev receives a transaction with the
  old value, it can convert it to the new format on the fly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Deprecate legacy RTC drivers
Jean Delvare [Thu, 12 Jul 2007 12:12:29 +0000]
i2c: Deprecate legacy RTC drivers

We have a new RTC subsystem with better drivers.

Legacy driver status:
* ds1337: The DS1337 and DS1339 are now supported by the rtc-ds1307
  driver, so it looks to me like we could even delete the ds1337
  driver right away.
* ds1374: Will soon be replaced with Scott Wood's rtc-ds1374 driver.
* m41t00: The M41T00 is supported by the rtc-ds1307 driver. For the
  M41T81 and M41T85, the rtc-m41t80 driver written by Atsushi Nemoto
  should work.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: Mark A. Greer <mgreer@mvista.com>
Acked-by: James Chapman <jchapman@katalix.com>
Cc: Randy Vinson <rvinson@mvista.com>

12 years agoi2c: Delete outdated x1205 driver documentation
Jean Delvare [Thu, 12 Jul 2007 12:12:28 +0000]
i2c: Delete outdated x1205 driver documentation

The x1205 driver moved to the RTC subsystem and was significantly
modified since then, so just delete the outdated documentation.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>

12 years agoscx200_acb: Use mutex instead of semaphore
Matthias Kaehlcke [Thu, 12 Jul 2007 12:12:28 +0000]
scx200_acb: Use mutex instead of semaphore

The scx200_acb driver use a semaphore as mutex.  Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jordan Crouse <jordan.crouse@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Fix sparse warning in i2c.h
Mark M. Hoffman [Thu, 12 Jul 2007 12:12:28 +0000]
i2c: Fix sparse warning in i2c.h

Kill a sparse warning by un-nesting two container_of() calls.

Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Add kernel documentation
David Brownell [Thu, 12 Jul 2007 12:12:28 +0000]
i2c: Add kernel documentation

Generate I2C kerneldoc; fix various glitches and add "context" sections to
that documentation.  Most I2C and SMBus functions still have no kerneldoc.

Let me suggest providing kerneldoc for all the i2c_smbus_*() functions as
a small and mostly self-contained project for anyone so inclined.  :)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoBlackfin serial driver: supporting BF548-EZKIT serial port
Roy Huang [Thu, 12 Jul 2007 08:43:46 +0000]
Blackfin serial driver: supporting BF548-EZKIT serial port

Signed-off-by: Roy Huang <roy.huang@analog.com>
Signed-off-by: Mike Frysinger <michael.frysinger@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

12 years agoVideo Console: Blackfin doesnt support VGA console
Michael Hennerich [Thu, 12 Jul 2007 04:07:40 +0000]
Video Console: Blackfin doesnt support VGA console

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

12 years agoBlackfin arch: Add peripheral io API to gpio header file
Sonic Zhang [Thu, 12 Jul 2007 09:06:45 +0000]
Blackfin arch: Add peripheral io API to gpio header file

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

12 years agoBlackfin arch: set up gpio interrupt IRQ_PJ9 for BF54x ATAPI PATA driver
Sonic Zhang [Thu, 12 Jul 2007 07:20:25 +0000]
Blackfin arch: set up gpio interrupt IRQ_PJ9 for BF54x ATAPI PATA driver

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>

12 years agoBlackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging
Bryan Wu [Thu, 12 Jul 2007 06:55:05 +0000]
Blackfin arch: add missing CONFIG_LARGE_ALLOCS when upstream merging

Signed-off-by: Bryan Wu <bryan.wu@analog.com>