8 years agoMerge branch 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb...
Linus Torvalds [Tue, 15 Feb 2011 23:19:22 +0000]
Merge branch 'tools-release' of git://git./linux/kernel/git/lenb/linux-idle-2.6

* 'tools-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  tools: turbostat: style updates
  tools: turbostat: fix bitwise and operand

8 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Tue, 15 Feb 2011 20:07:35 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/djbw/async_tx

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (21 commits)
  dmaengine: add slave-dma maintainer
  dma: ipu_idmac: do not lose valid received data in the irq handler
  dmaengine: imx-sdma: fix up param for the last BD in sdma_prep_slave_sg()
  dmaengine: imx-sdma: correct sdmac->status in sdma_handle_channel_loop()
  dmaengine: imx-sdma: return sdmac->status in sdma_tx_status()
  dmaengine: imx-sdma: set sdmac->status to DMA_ERROR in err_out of sdma_prep_slave_sg()
  dmaengine: imx-sdma: remove IMX_DMA_SG_LOOP handling in sdma_prep_slave_sg()
  dmaengine i.MX dma: initialize dma capabilities outside channel loop
  dmaengine i.MX DMA: do not initialize chan_id field
  dmaengine i.MX dma: check sg entries for valid addresses and lengths
  dmaengine i.MX dma: set maximum segment size for our device
  dmaengine i.MX SDMA: reserve channel 0 by not registering it
  dmaengine i.MX SDMA: initialize dma capabilities outside channel loop
  dmaengine i.MX SDMA: do not initialize chan_id field
  dmaengine i.MX sdma: check sg entries for valid addresses and lengths
  dmaengine i.MX sdma: set maximum segment size for our device
  DMA: PL08x: fix channel pausing to timeout rather than lockup
  DMA: PL08x: fix infinite wait when terminating transfers
  dmaengine: imx-sdma: fix inconsistent naming in sdma_assign_cookie()
  dmaengine: imx-sdma: propagate error in sdma_probe() instead of returning 0

8 years agoMerge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Tue, 15 Feb 2011 20:06:38 +0000]
Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux:
  nfsd: break lease on unlink due to rename
  nfsd4: acquire only one lease per file
  nfsd4: modify fi_delegations under recall_lock
  nfsd4: remove unused deleg dprintk's.
  nfsd4: split lease setting into separate function
  nfsd4: fix leak on allocation error
  nfsd4: add helper function for lease setup
  nfsd4: split up nfsd_break_deleg_cb
  NFSD: memory corruption due to writing beyond the stat array
  NFSD: use nfserr for status after decode_cb_op_status
  nfsd: don't leak dentry count on mnt_want_write failure

8 years agoMerge branches 'core-fixes-for-linus' and 'timers-fixes-for-linus' of git://git.kerne...
Linus Torvalds [Tue, 15 Feb 2011 18:19:18 +0000]
Merge branches 'core-fixes-for-linus' and 'timers-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  Revert "lockdep, timer: Fix del_timer_sync() annotation"

* 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  timer debug: Hide kernel addresses via %pK in /proc/timer_list

8 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 15 Feb 2011 18:18:48 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: Fix text_poke_smp_batch() deadlock
  perf tools: Fix thread_map event synthesizing in top and record
  watchdog, nmi: Lower the severity of error messages
  ARM: oprofile: Fix backtraces in timer mode
  oprofile: Fix usage of CONFIG_HW_PERF_EVENTS for oprofile_perf_init and friends

8 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 15 Feb 2011 18:18:29 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, dmi, debug: Log board name (when present) in dmesg/oops output
  x86, ioapic: Don't warn about non-existing IOAPICs if we have none
  x86: Fix mwait_usable section mismatch
  x86: Readd missing irq_to_desc() in fixup_irq()
  x86: Fix section mismatch in LAPIC initialization

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Tue, 15 Feb 2011 17:40:27 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: matrix_keypad - increase the limit of rows and columns
  Input: wacom - fix error path in wacom_probe()
  Input: ads7846 - check proper condition when freeing gpio
  Revert "Input: do not pass injected events back to the originating handler"
  Input: sysrq - rework re-inject logic
  Input: serio - clear pending rescans after sysfs driver rebind
  Input: rotary_encoder - use proper irqflags
  Input: wacom_w8001 - report resolution to userland

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Tue, 15 Feb 2011 16:06:36 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  get rid of nameidata_dentry_drop_rcu() calling nameidata_drop_rcu()
  drop out of RCU in return_reval
  split do_revalidate() into RCU and non-RCU cases
  in do_lookup() split RCU and non-RCU cases of need_revalidate
  nothing in do_follow_link() is going to see RCU

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Tue, 15 Feb 2011 16:00:35 +0000]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: check return value of alloc_extent_map()
  Btrfs - Fix memory leak in btrfs_init_new_device()
  btrfs: prevent heap corruption in btrfs_ioctl_space_info()
  Btrfs: Fix balance panic
  Btrfs: don't release pages when we can't clear the uptodate bits
  Btrfs: fix page->private races

8 years agos390: remove task_show_regs
Martin Schwidefsky [Tue, 15 Feb 2011 08:43:32 +0000]
s390: remove task_show_regs

task_show_regs used to be a debugging aid in the early bringup days
of Linux on s390. /proc/<pid>/status is a world readable file, it
is not a good idea to show the registers of a process. The only
correct fix is to remove task_show_regs.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoget rid of nameidata_dentry_drop_rcu() calling nameidata_drop_rcu()
Al Viro [Tue, 15 Feb 2011 06:42:59 +0000]
get rid of nameidata_dentry_drop_rcu() calling nameidata_drop_rcu()

can't happen anymore and didn't work right anyway

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agodrop out of RCU in return_reval
Al Viro [Tue, 15 Feb 2011 06:35:28 +0000]
drop out of RCU in return_reval

... thus killing the need to handle drop-from-RCU in d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agosplit do_revalidate() into RCU and non-RCU cases
Al Viro [Tue, 15 Feb 2011 06:32:55 +0000]
split do_revalidate() into RCU and non-RCU cases

fixing oopsen in lookup_one_len()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoin do_lookup() split RCU and non-RCU cases of need_revalidate
Al Viro [Tue, 15 Feb 2011 06:26:22 +0000]
in do_lookup() split RCU and non-RCU cases of need_revalidate

and use unlikely() instead of gotos, for fsck sake...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agonothing in do_follow_link() is going to see RCU
Al Viro [Tue, 15 Feb 2011 05:38:26 +0000]
nothing in do_follow_link() is going to see RCU

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agox86, dmi, debug: Log board name (when present) in dmesg/oops output
Naga Chumbalkar [Mon, 14 Feb 2011 22:47:17 +0000]
x86, dmi, debug: Log board name (when present) in dmesg/oops output

The "Type 2" SMBIOS record that contains Board Name is not
strictly required and may be absent in the SMBIOS on some

( Please note that Type 2 is not listed in Table 3 in Sec 6.2
  ("Required Structures and Data") of the SMBIOS v2.7
  Specification. )

Use the Manufacturer Name (aka System Vendor) name.
Print Board Name only when it is present.

Before the fix:
  (i) dmesg output: DMI: /ProLiant DL380 G6, BIOS P62 01/29/2011
 (ii) oops output:  Pid: 2170, comm: bash Not tainted 2.6.38-rc4+ #3 /ProLiant DL380 G6

After the fix:
  (i) dmesg output: DMI: HP ProLiant DL380 G6, BIOS P62 01/29/2011
 (ii) oops output:  Pid: 2278, comm: bash Not tainted 2.6.38-rc4+ #4 HP ProLiant DL380 G6

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Reviewed-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: <stable@kernel.org> # .3x - good for debugging, please apply as far back as it applies cleanly
LKML-Reference: <20110214224423.2182.13929.sendpatchset@nchumbalkar.americas.hpqcorp.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agox86, ioapic: Don't warn about non-existing IOAPICs if we have none
Paul Bolle [Mon, 14 Feb 2011 21:52:38 +0000]
x86, ioapic: Don't warn about non-existing IOAPICs if we have none

mp_find_ioapic() prints errors like:

    ERROR: Unable to locate IOAPIC for GSI 13

if it can't find the IOAPIC that manages that specific GSI. I
see errors like that at every boot of a laptop that apparently
doesn't have any IOAPICs.

But if there are no IOAPICs it doesn't seem to be an error that
none can be found. A solution that gets rid of this message is
to directly return if nr_ioapics (still) is zero. (But keep
returning -1 in that case, so nothing breaks from this change.)

The call chain that generates this error is:


Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoMerge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile...
Ingo Molnar [Tue, 15 Feb 2011 03:10:35 +0000]
Merge branch 'urgent' of git://git./linux/kernel/git/rric/oprofile into perf/urgent

8 years agoMerge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 14 Feb 2011 22:49:29 +0000]
Merge branch 'fixes' of /home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch
  ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR
  ARM: 6658/1: collie: do actually pass locomo_info to locomo driver
  ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL
  ARM: 6654/1: perf/oprofile: fix off-by-one in stack check
  ARM: fixup SMP alternatives in modules
  ARM: make SWP emulation explicit on !CPU_USE_DOMAINS
  ARM: Avoid building unsafe kernels on OMAP2 and MX3
  ARM: pxa: Properly configure PWM period for palm27x
  ARM: pxa: only save/restore registers when pm functions are defined
  ARM: pxa/colibri: use correct SD detect pin
  ARM: pxa: fix mfpr_sync to read from valid offset

8 years agoBtrfs: check return value of alloc_extent_map()
Tsutomu Itoh [Mon, 14 Feb 2011 00:45:29 +0000]
Btrfs: check return value of alloc_extent_map()

I add the check on the return value of alloc_extent_map() to several places.
In addition, alloc_extent_map() returns only the address or NULL.
Therefore, check by IS_ERR() is unnecessary. So, I remove IS_ERR() checking.

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs - Fix memory leak in btrfs_init_new_device()
Ilya Dryomov [Sun, 6 Feb 2011 19:58:21 +0000]
Btrfs - Fix memory leak in btrfs_init_new_device()

Memory allocated by calling kstrdup() should be freed.

Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agobtrfs: prevent heap corruption in btrfs_ioctl_space_info()
Dan Rosenberg [Mon, 14 Feb 2011 21:04:23 +0000]
btrfs: prevent heap corruption in btrfs_ioctl_space_info()

Commit bf5fc093c5b625e4259203f1cee7ca73488a5620 refactored
btrfs_ioctl_space_info() and introduced several security issues.

space_args.space_slots is an unsigned 64-bit type controlled by a
possibly unprivileged caller.  The comparison as a signed int type
allows providing values that are treated as negative and cause the
subsequent allocation size calculation to wrap, or be truncated to 0.
By providing a size that's truncated to 0, kmalloc() will return
ZERO_SIZE_PTR.  It's also possible to provide a value smaller than the
slot count.  The subsequent loop ignores the allocation size when
copying data in, resulting in a heap overflow or write to ZERO_SIZE_PTR.

The fix changes the slot count type and comparison typecast to u64,
which prevents truncation or signedness errors, and also ensures that we
don't copy more data than we've allocated in the subsequent loop.  Note
that zero-size allocations are no longer possible since there is already
an explicit check for space_args.space_slots being 0 and truncation of
this value is no longer an issue.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Reviewed-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: Fix balance panic
Yan, Zheng [Mon, 14 Feb 2011 21:00:03 +0000]
Btrfs: Fix balance panic

Mark the cloned backref_node as checked in clone_backref_node()

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoMerge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 14 Feb 2011 18:10:37 +0000]
Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6

* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6:
  Revert "dt: add documentation of ARM dt boot interface"

8 years agoMerge branch 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip...
Linus Torvalds [Mon, 14 Feb 2011 18:10:07 +0000]
Merge branch 'rtc-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'rtc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  RTC: Fix minor compile warning
  RTC: Convert rtc drivers to use the alarm_irq_enable method
  RTC: Fix rtc driver ioctl specific shortcutting

8 years agoBtrfs: don't release pages when we can't clear the uptodate bits
Chris Mason [Mon, 14 Feb 2011 17:52:08 +0000]
Btrfs: don't release pages when we can't clear the uptodate bits

Btrfs tracks uptodate state in an rbtree as well as in the
page bits.  This is supposed to enable us to use block sizes other than
the page size, but there are a few parts still missing before that
completely works.

But, our readpage routine trusts this additional range based tracking
of uptodateness, much in the same way the buffer head up to date bits
are trusted for the other filesystems.

The problem is that sometimes we need to allocate memory in order to
split records in the rbtree, even when we are just clearing bits.  This
can be difficult when our clearing function is called GFP_ATOMIC, which
can happen in the releasepage path.

So, what happens today looks like this:

releasepage called with GFP_ATOMIC
btrfs_releasepage calls clear_extent_bit
clear_extent_bit fails to allocate ram, leaving the up to date bit set
btrfs_releasepage returns success

The end result is the page being gone, but btrfs thinking the range is
up to date.   Later on if someone tries to read that same page, the
btrfs readpage code will return immediately thinking the page is already
up to date.

This commit fixes things to fail the releasepage when we can't clear the
extent state bits.  It covers both data pages and metadata tree blocks.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoBtrfs: fix page->private races
Chris Mason [Thu, 10 Feb 2011 17:35:00 +0000]
Btrfs: fix page->private races

There is a race where btrfs_releasepage can drop the
page->private contents just as alloc_extent_buffer is setting
up pages for metadata.  Because of how the Btrfs page flags work,
this results in us skipping the crc on the page during IO.

This patch sovles the race by waiting until after the extent buffer
is inserted into the radix tree before it sets page private.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agonfsd: break lease on unlink due to rename
J. Bruce Fields [Sun, 6 Feb 2011 21:46:30 +0000]
nfsd: break lease on unlink due to rename

4795bb37effb7b8fe77e2d2034545d062d3788a8 "nfsd: break lease on unlink,
link, and rename", only broke the lease on the file that was being
renamed, and didn't handle the case where the target path refers to an
already-existing file that will be unlinked by a rename--in that case
the target file should have any leases broken as well.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agonfsd4: acquire only one lease per file
J. Bruce Fields [Tue, 1 Feb 2011 00:20:39 +0000]
nfsd4: acquire only one lease per file

Instead of acquiring one lease each time another client opens a file,
nfsd can acquire just one lease to represent all of them, and reference
count it to determine when to release it.

This fixes a regression introduced by
c45821d263a8a5109d69a9e8942b8d65bcd5f31a "locks: eliminate fl_mylease
callback": after that patch, only the struct file * is used to determine
who owns a given lease.  But since we recently converted the server to
share a single struct file per open, if we acquire multiple leases on
the same file from nfsd, it then becomes impossible on unlocking a lease
to determine which of those leases (all of whom share the same struct
file *) we meant to remove.

Thanks to Takashi Iwai <tiwai@suse.de> for catching a bug in a previous
version of this patch.

Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agonfsd4: modify fi_delegations under recall_lock
J. Bruce Fields [Mon, 7 Feb 2011 21:53:46 +0000]
nfsd4: modify fi_delegations under recall_lock

Modify fi_delegations only under the recall_lock, allowing us to use
that list on lease breaks.

Also some trivial cleanup to simplify later changes.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agonfsd4: remove unused deleg dprintk's.
J. Bruce Fields [Mon, 7 Feb 2011 20:44:12 +0000]
nfsd4: remove unused deleg dprintk's.

These aren't all that useful, and get in the way of the next steps.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agonfsd4: split lease setting into separate function
J. Bruce Fields [Mon, 31 Jan 2011 22:58:10 +0000]
nfsd4: split lease setting into separate function

Splitting some code into a separate function which we'll be adding some
more to.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agonfsd4: fix leak on allocation error
J. Bruce Fields [Mon, 31 Jan 2011 22:14:55 +0000]
nfsd4: fix leak on allocation error

Also share some common exit code.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agonfsd4: add helper function for lease setup
J. Bruce Fields [Mon, 31 Jan 2011 16:55:12 +0000]
nfsd4: add helper function for lease setup

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agonfsd4: split up nfsd_break_deleg_cb
J. Bruce Fields [Mon, 31 Jan 2011 16:54:04 +0000]
nfsd4: split up nfsd_break_deleg_cb

We'll be adding some more code here soon.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agoNFSD: memory corruption due to writing beyond the stat array
Konstantin Khorenko [Tue, 1 Feb 2011 14:16:29 +0000]
NFSD: memory corruption due to writing beyond the stat array

If nfsd fails to find an exported via NFS file in the readahead cache, it
should increment corresponding nfsdstats counter (ra_depth[10]), but due to a
bug it may instead write to ra_depth[11], corrupting the following field.

In a kernel with NFSDv4 compiled in the corruption takes the form of an
increment of a counter of the number of NFSv4 operation 0's received; since
there is no operation 0, this is harmless.

In a kernel with NFSDv4 disabled it corrupts whatever happens to be in the
memory beyond nfsdstats.

Signed-off-by: Konstantin Khorenko <khorenko@openvz.org>
Cc: stable@kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agoNFSD: use nfserr for status after decode_cb_op_status
Benny Halevy [Thu, 13 Jan 2011 09:25:31 +0000]
NFSD: use nfserr for status after decode_cb_op_status

Bugs introduced in 85a56480191ca9f08fc775c129b9eb5c8c1f2c05
"NFSD: Update XDR decoders in NFSv4 callback client"

Cc: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agonfsd: don't leak dentry count on mnt_want_write failure
J. Bruce Fields [Sat, 15 Jan 2011 01:00:02 +0000]
nfsd: don't leak dentry count on mnt_want_write failure

The exit cleanup isn't quite right here.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

8 years agoRevert "dt: add documentation of ARM dt boot interface"
Grant Likely [Mon, 14 Feb 2011 15:13:20 +0000]
Revert "dt: add documentation of ARM dt boot interface"

This reverts commit 9830fcd6f6a4781d8b46d2b35c13b39f30915c63.

The ARM dt support has not been merged yet; this documentation update
was premature.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agox86: Fix mwait_usable section mismatch
Borislav Petkov [Fri, 11 Feb 2011 17:17:54 +0000]
x86: Fix mwait_usable section mismatch

We use it in non __cpuinit code now too so drop marker.

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
LKML-Reference: <20110211171754.GA21047@aftab>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agodmaengine: add slave-dma maintainer
Dan Williams [Mon, 14 Feb 2011 08:42:08 +0000]
dmaengine: add slave-dma maintainer

Slave-dma has become the predominant usage model for dmaengine and needs
special attention.  Memory-to-memory dma usage cases will continue to be
maintained by Dan.

Cc: Alan Cox <alan@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

8 years agoMerge branch 'imx' into dmaengine-fixes
Dan Williams [Mon, 14 Feb 2011 10:40:46 +0000]
Merge branch 'imx' into dmaengine-fixes

8 years agodma: ipu_idmac: do not lose valid received data in the irq handler
Anatolij Gustschin [Mon, 31 Jan 2011 12:22:29 +0000]
dma: ipu_idmac: do not lose valid received data in the irq handler

Currently when two or more buffers are queued by the camera driver
and so the double buffering is enabled in the idmac, we lose one
frame comming from CSI since the reporting of arrival of the first
frame is deferred by the DMAIC_7_EOF interrupt handler and reporting
of the arrival of the last frame is not done at all. So when requesting
N frames from the image sensor we actually receive N - 1 frames in
user space.

The reason for this behaviour is that the DMAIC_7_EOF interrupt
handler misleadingly assumes that the CUR_BUF flag is pointing to the
buffer used by the IDMAC. Actually it is not the case since the
CUR_BUF flag will be flipped by the FSU when the FSU is sending the
<TASK>_NEW_FRM_RDY signal when new frame data is delivered by the CSI.
When sending this singal, FSU updates the DMA_CUR_BUF and the
DMA_BUFx_RDY flags: the DMA_CUR_BUF is flipped, the DMA_BUFx_RDY
is cleared, indicating that the frame data is beeing written by
the IDMAC to the pointed buffer. DMA_BUFx_RDY is supposed to be
set to the ready state again by the MCU, when it has handled the
received data. DMAIC_7_CUR_BUF flag won't be flipped here by the
IPU, so waiting for this event in the EOF interrupt handler is wrong.
Actually there is no spurious interrupt as described in the comments,
this is the valid DMAIC_7_EOF interrupt indicating reception of the
frame from CSI.

The patch removes code that waits for flipping of the DMAIC_7_CUR_BUF
flag in the DMAIC_7_EOF interrupt handler. As the comment in the
current code denotes, this waiting doesn't help anyway. As a result
of this removal the reporting of the first arrived frame is not
deferred to the time of arrival of the next frame and the drivers
software flag 'ichan->active_buffer' is in sync with DMAIC_7_CUR_BUF
flag, so the reception of all requested frames works.

This has been verified on the hardware which is triggering the
image sensor by the programmable state machine, allowing to
obtain exact number of frames. On this hardware we do not tolerate
losing frames.

This patch also removes resetting the DMA_BUFx_RDY flags of
all channels in ipu_disable_channel() since transfers on other
DMA channels might be triggered by other running tasks and the
buffers should always be ready for data sending or reception.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

8 years agoMerge branch 'fortglx/2.6.38/tip/timers/rtc' of git://git.linaro.org/people/jstultz...
Thomas Gleixner [Mon, 14 Feb 2011 08:00:30 +0000]
Merge branch 'fortglx/2.6.38/tip/timers/rtc' of git://git.linaro.org/people/jstultz/linux into timers/urgent

8 years agoklist: Fix object alignment on 64-bit.
David Miller [Mon, 14 Feb 2011 00:37:07 +0000]
klist: Fix object alignment on 64-bit.

Commit c0e69a5bbc6f ("klist.c: bit 0 in pointer can't be used as flag")
intended to make sure that all klist objects were at least pointer size
aligned, but used the constant "4" which only works on 32-bit.

Use "sizeof(void *)" which is correct in all cases.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: stable <stable@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Sun, 13 Feb 2011 15:59:48 +0000]
Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  devicetree-discuss is moderated for non-subscribers
  MAINTAINERS: Add entry for GPIO subsystem
  dt: add documentation of ARM dt boot interface
  dt: Remove obsolete description of powerpc boot interface
  dt: Move device tree documentation out of powerpc directory
  spi/spi_sh_msiof: fix wrong address calculation, which leads to an Oops

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 13 Feb 2011 15:58:50 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - add quirk for Ordissimo EVE using a realtek ALC662
  ALSA: hrtimer: remove superfluous tasklet invocation
  ALSA: hrtimer: handle delayed timer interrupts
  ALSA: HDA: Add subwoofer quirk for Acer Aspire 8942G
  ALSA: hda - Don't handle empty patch files
  ALSA: hda - Fix missing CA initialization for HDMI/DP
  ALSA: usbaudio - Enable the E-MU 0204 USB
  ALSA: hda - switch lfe with side in mixer for 4930g
  ASoC: Improve WM8994 digital power sequencing
  ASoC: Create an AIF1ADCDAT signal widget to match AIF2
  asoc: davinci: da830/omap-l137: correct cpu_dai_name
  ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()

8 years agoRevert "pci: use security_capable() when checking capablities during config space...
Linus Torvalds [Sun, 13 Feb 2011 15:50:50 +0000]
Revert "pci: use security_capable() when checking capablities during config space read"

This reverts commit 47970b1b2aa64464bc0a9543e86361a622ae7c03.

It turns out it breaks several distributions.  Looks like the stricter
selinux checks fail due to selinux policies not being set to allow the
access - breaking X, but also lspci.

So while the change was clearly the RightThing(tm) to do in theory, in
practice we have backwards compatibility issues making it not work.

Reported-by: Dave Young <hidave.darkstar@gmail.com>
Acked-by: David Airlie <airlied@linux.ie>
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sun, 13 Feb 2011 09:05:30 +0000]
Merge branch 'fix/asoc' into for-linus

8 years agoMerge branch 'devicetree/merge' into spi/merge
Grant Likely [Sun, 13 Feb 2011 06:53:34 +0000]
Merge branch 'devicetree/merge' into spi/merge

8 years agodevicetree-discuss is moderated for non-subscribers
Paul Bolle [Sat, 12 Feb 2011 11:33:59 +0000]
devicetree-discuss is moderated for non-subscribers

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agoMAINTAINERS: Add entry for GPIO subsystem
Grant Likely [Sat, 12 Feb 2011 08:48:14 +0000]
MAINTAINERS: Add entry for GPIO subsystem

I'll probably regret this....

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sat, 12 Feb 2011 17:10:24 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: call __jbd2_log_start_commit with j_state_lock write locked
  ext4: serialize unaligned asynchronous DIO
  ext4: make grpinfo slab cache names static
  ext4: Fix data corruption with multi-block writepages support
  ext4: fix up ext4 error handling
  ext4: unregister features interface on module unload
  ext4: fix panic on module unload when stopping lazyinit thread

8 years agojbd2: call __jbd2_log_start_commit with j_state_lock write locked
Theodore Ts'o [Sat, 12 Feb 2011 13:18:24 +0000]
jbd2: call __jbd2_log_start_commit with j_state_lock write locked

On an SMP ARM system running ext4, I've received a report that the
first J_ASSERT in jbd2_journal_commit_transaction has been triggering:

J_ASSERT(journal->j_running_transaction != NULL);

While investigating possible causes for this problem, I noticed that
__jbd2_log_start_commit() is getting called with j_state_lock only
read-locked, in spite of the fact that it's possible for it might
j_commit_request.  Fix this by grabbing the necessary information so
we can test to see if we need to start a new transaction before
dropping the read lock, and then calling jbd2_log_start_commit() which
will grab the write lock.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

8 years agoext4: serialize unaligned asynchronous DIO
Eric Sandeen [Sat, 12 Feb 2011 13:17:34 +0000]
ext4: serialize unaligned asynchronous DIO

ext4 has a data corruption case when doing non-block-aligned
asynchronous direct IO into a sparse file, as demonstrated
by xfstest 240.

The root cause is that while ext4 preallocates space in the
hole, mappings of that space still look "new" and
dio_zero_block() will zero out the unwritten portions.  When
more than one AIO thread is going, they both find this "new"
block and race to zero out their portion; this is uncoordinated
and causes data corruption.

Dave Chinner fixed this for xfs by simply serializing all
unaligned asynchronous direct IO.  I've done the same here.
The difference is that we only wait on conversions, not all IO.
This is a very big hammer, and I'm not very pleased with
stuffing this into ext4_file_write().  But since ext4 is
DIO_LOCKING, we need to serialize it at this high level.

I tried to move this into ext4_ext_direct_IO, but by then
we have the i_mutex already, and we will wait on the
work queue to do conversions - which must also take the
i_mutex.  So that won't work.

This was originally exposed by qemu-kvm installing to
a raw disk image with a normal sector-63 alignment.  I've
tested a backport of this patch with qemu, and it does
avoid the corruption.  It is also quite a lot slower
(14 min for package installs, vs. 8 min for well-aligned)
but I'll take slow correctness over fast corruption any day.

Mingming suggested that we can track outstanding
conversions, and wait on those so that non-sparse
files won't be affected, and I've implemented that here;
unaligned AIO to nonsparse files won't take a perf hit.

[tytso@mit.edu: Keep the mutex as a hashed array instead
 of bloating the ext4 inode]

[tytso@mit.edu: Fix up namespace issues so that global
 variables are protected with an "ext4_" prefix.]

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

8 years agoext4: make grpinfo slab cache names static
Eric Sandeen [Sat, 12 Feb 2011 13:12:18 +0000]
ext4: make grpinfo slab cache names static

In 2.6.37 I was running into oopses with repeated module
loads & unloads.  I tracked this down to:

fb1813f4 ext4: use dedicated slab caches for group_info structures

(this was in addition to the features advert unload problem)

The kstrdup & subsequent kfree of the cache name was causing
a double free.  In slub, at least, if I read it right it allocates
& frees the name itself, slab seems to do something different...
so in slub I think we were leaking -our- cachep->name, and double
freeing the one allocated by slub.

After getting lost in slab/slub/slob a bit, I just looked at other
sized-caches that get allocated.  jbd2, biovec, sgpool all do it
more or less the way jbd2 does.  Below patch follows the jbd2
method of dynamically allocating a cache at mount time from
a list of static names.

(This might also possibly fix a race creating the caches with
parallel mounts running).

[Folded in a fix from Dan Carpenter which fixed an off-by-one error in
the original patch]

Cc: stable@kernel.org
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

8 years agotimer debug: Hide kernel addresses via %pK in /proc/timer_list
Kees Cook [Sat, 12 Feb 2011 03:21:25 +0000]
timer debug: Hide kernel addresses via %pK in /proc/timer_list

In the continuing effort to avoid kernel addresses leaking to
unprivileged users, this patch switches to %pK for
/proc/timer_list reporting.

Signed-off-by: Kees Cook <kees.cook@canonical.com>
Cc: John Stultz <johnstul@us.ibm.com>
Cc: Dan Rosenberg <drosenberg@vsecurity.com>
Cc: Eugene Teo <eugeneteo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110212032125.GA23571@outflux.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agox86: Readd missing irq_to_desc() in fixup_irq()
Thomas Gleixner [Sat, 12 Feb 2011 10:51:03 +0000]
x86: Readd missing irq_to_desc() in fixup_irq()

commit a3c08e5d(x86: Convert irq_chip access to new functions)
accidentally zapped desc = irq_to_desc(irq); in the vector loop.
So we lock some random irq descriptor.

Add it back.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org> # .37

8 years agoMAINTAINERS: Add entry for GPIO subsystem
Grant Likely [Sat, 12 Feb 2011 08:45:55 +0000]
MAINTAINERS: Add entry for GPIO subsystem

I'll probably regret this....

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

8 years agox86: Fix text_poke_smp_batch() deadlock
Peter Zijlstra [Fri, 11 Feb 2011 21:07:46 +0000]
x86: Fix text_poke_smp_batch() deadlock

Fix this deadlock - we are already holding the mutex:

[ INFO: possible circular locking dependency detected ] 2.6.38-rc4-test+ #1
bash/1850 is trying to acquire lock:
 (text_mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f

but task is already holding lock:
 (smp_alt){+.+...}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (smp_alt){+.+...}:
       [<ffffffff81082d02>] lock_acquire+0xcd/0xf8
       [<ffffffff8192e119>] __mutex_lock_common+0x4c/0x339
       [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43
       [<ffffffff8101050f>] alternatives_smp_switch+0x77/0x1d8
       [<ffffffff81926a6f>] do_boot_cpu+0xd7/0x762
       [<ffffffff819277dd>] native_cpu_up+0xe6/0x16a
       [<ffffffff81928e28>] _cpu_up+0x9d/0xee
       [<ffffffff81928f4c>] cpu_up+0xd3/0xe7
       [<ffffffff82268d4b>] kernel_init+0xe8/0x20a
       [<ffffffff8100ba24>] kernel_thread_helper+0x4/0x10

-> #1 (cpu_hotplug.lock){+.+.+.}:
       [<ffffffff81082d02>] lock_acquire+0xcd/0xf8
       [<ffffffff8192e119>] __mutex_lock_common+0x4c/0x339
       [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43
       [<ffffffff810568cc>] get_online_cpus+0x41/0x55
       [<ffffffff810a1348>] stop_machine+0x1e/0x3e
       [<ffffffff819314c1>] text_poke_smp_batch+0x3a/0x3c
       [<ffffffff81932b6c>] arch_optimize_kprobes+0x10d/0x11c
       [<ffffffff81933a51>] kprobe_optimizer+0x152/0x222
       [<ffffffff8106bb71>] process_one_work+0x1d3/0x335
       [<ffffffff8106cfae>] worker_thread+0x104/0x1a4
       [<ffffffff810707c4>] kthread+0x9d/0xa5
       [<ffffffff8100ba24>] kernel_thread_helper+0x4/0x10

-> #0 (text_mutex){+.+.+.}:

other info that might help us debug this:

6 locks held by bash/1850:
 #0:  (&buffer->mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f
 #1:  (s_active#75){.+.+.+}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f
 #2:  (x86_cpu_hotplug_driver_mutex){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f
 #3:  (cpu_add_remove_lock){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f
 #4:  (cpu_hotplug.lock){+.+.+.}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f
 #5:  (smp_alt){+.+...}, at: [<ffffffff8100a9c1>] return_to_handler+0x0/0x2f

stack backtrace:
Pid: 1850, comm: bash Not tainted 2.6.38-rc4-test+ #1
Call Trace:

 [<ffffffff81080eb2>] print_circular_bug+0xa8/0xb7
 [<ffffffff8192e4ca>] mutex_lock_nested+0x3e/0x43
 [<ffffffff81010302>] alternatives_smp_unlock+0x3d/0x93
 [<ffffffff81010630>] alternatives_smp_switch+0x198/0x1d8
 [<ffffffff8102568a>] native_cpu_die+0x65/0x95
 [<ffffffff818cc4ec>] _cpu_down+0x13e/0x202
 [<ffffffff8117a619>] sysfs_write_file+0x108/0x144
 [<ffffffff8111f5a2>] vfs_write+0xac/0xff
 [<ffffffff8111f7a9>] sys_write+0x4a/0x6e

Reported-by: Steven Rostedt <rostedt@goodmis.org>
Tested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: mathieu.desnoyers@efficios.com
Cc: rusty@rustcorp.com.au
Cc: ananth@in.ibm.com
Cc: masami.hiramatsu.pt@hitachi.com
Cc: fweisbec@gmail.com
Cc: jbeulich@novell.com
Cc: jbaron@redhat.com
Cc: mhiramat@redhat.com
LKML-Reference: <1297458466.5226.93.camel@laptop>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoMerge branch 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Sat, 12 Feb 2011 00:30:09 +0000]
Merge branch 'kvm-updates/2.6.38' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Make sure KERNEL_GS_BASE is valid when loading gs_index

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
Linus Torvalds [Sat, 12 Feb 2011 00:30:05 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Fix DIMMs per DCTs output

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
Linus Torvalds [Sat, 12 Feb 2011 00:29:57 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: use single thread workqueues

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Sat, 12 Feb 2011 00:29:50 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: don't always drop malformed replies on the floor (try #3)
  cifs: clean up checks in cifs_echo_request
  [CIFS] Do not send SMBEcho requests on new sockets until SMBNegotiate

8 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Sat, 12 Feb 2011 00:16:25 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon: (emc1403) Fix I2C address range
  hwmon: (lm63) Consider LM64 temperature offset

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sat, 12 Feb 2011 00:16:03 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  pci: use security_capable() when checking capablities during config space read
  security: add cred argument to security_capable()
  tpm_tis: Use timeouts returned from TPM

8 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sat, 12 Feb 2011 00:15:15 +0000]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h
  ARM: S5PV310: Cleanup System MMU
  ARM: S5PV310: Add support System MMU on SMDKV310

8 years agoMerge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze
Linus Torvalds [Sat, 12 Feb 2011 00:13:53 +0000]
Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblaze

* 'next' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Fix msr instruction detection
  microblaze: Fix pte_update function
  microblaze: Fix asm compilation warning
  microblaze: Fix IRQ flag handling for MSR=0

8 years agodrivers/w1/masters/omap_hdq.c: add missing clk_put
Julia Lawall [Thu, 10 Feb 2011 23:01:37 +0000]
drivers/w1/masters/omap_hdq.c: add missing clk_put

This code makes two calls to clk_get, then test both return values and
fails if either failed.

The problem is that in the first inner if, where the first call to
clk_get has failed, it don't know if the second call has failed as well.
So it don't know whether clk_get should be called on the result of the
second call.  Of course, it would be possible to test that value again.
A simpler solution is just to test the result of calling clk_get
directly after each call.

The semantic match that finds this problem is as follows:

// <smpl>
position p1,p2;
expression e;
statement S;

e = clk_get@p1(...)
if@p2 (IS_ERR(e)) S

expression e;
statement S;
identifier l;
position r.p1, p2 != r.p2;

*e = clk_get@p1(...)
... when != clk_put(e)
*if@p2 (...)
  ... when != clk_put(e)
* return ...;
}// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Amit Kucheria <amit.kucheria@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomemcg: fix leak of accounting at failure path of hugepage collapsing
KAMEZAWA Hiroyuki [Thu, 10 Feb 2011 23:01:36 +0000]
memcg: fix leak of accounting at failure path of hugepage collapsing

mem_cgroup_uncharge_page() should be called in all failure cases after
mem_cgroup_charge_newpage() is called in huge_memory.c::collapse_huge_page()

 [ 4209.076861] BUG: Bad page state in process khugepaged  pfn:1e9800
 [ 4209.077601] page:ffffea0006b14000 count:0 mapcount:0 mapping:          (null) index:0x2800
 [ 4209.078674] page flags: 0x40000000004000(head)
 [ 4209.079294] pc:ffff880214a30000 pc->flags:2146246697418756 pc->mem_cgroup:ffffc9000177a000
 [ 4209.082177] (/A)
 [ 4209.082500] Pid: 31, comm: khugepaged Not tainted 2.6.38-rc3-mm1 #1
 [ 4209.083412] Call Trace:
 [ 4209.083678]  [<ffffffff810f4454>] ? bad_page+0xe4/0x140
 [ 4209.084240]  [<ffffffff810f53e6>] ? free_pages_prepare+0xd6/0x120
 [ 4209.084837]  [<ffffffff8155621d>] ? rwsem_down_failed_common+0xbd/0x150
 [ 4209.085509]  [<ffffffff810f5462>] ? __free_pages_ok+0x32/0xe0
 [ 4209.086110]  [<ffffffff810f552b>] ? free_compound_page+0x1b/0x20
 [ 4209.086699]  [<ffffffff810fad6c>] ? __put_compound_page+0x1c/0x30
 [ 4209.087333]  [<ffffffff810fae1d>] ? put_compound_page+0x4d/0x200
 [ 4209.087935]  [<ffffffff810fb015>] ? put_page+0x45/0x50
 [ 4209.097361]  [<ffffffff8113f779>] ? khugepaged+0x9e9/0x1430
 [ 4209.098364]  [<ffffffff8107c870>] ? autoremove_wake_function+0x0/0x40
 [ 4209.099121]  [<ffffffff8113ed90>] ? khugepaged+0x0/0x1430
 [ 4209.099780]  [<ffffffff8107c236>] ? kthread+0x96/0xa0
 [ 4209.100452]  [<ffffffff8100dda4>] ? kernel_thread_helper+0x4/0x10
 [ 4209.101214]  [<ffffffff8107c1a0>] ? kthread+0x0/0xa0
 [ 4209.101842]  [<ffffffff8100dda0>] ? kernel_thread_helper+0x0/0x10

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agovmscan: fix zone shrinking exit when scan work is done
Johannes Weiner [Thu, 10 Feb 2011 23:01:34 +0000]
vmscan: fix zone shrinking exit when scan work is done

Commit 3e7d34497067 ("mm: vmscan: reclaim order-0 and use compaction
instead of lumpy reclaim") introduced an indefinite loop in

It meant to break out of this loop when no pages had been reclaimed and
not a single page was even scanned.  The way it would detect the latter
is by taking a snapshot of sc->nr_scanned at the beginning of the
function and comparing it against the new sc->nr_scanned after the scan
loop.  But it would re-iterate without updating that snapshot, looping
forever if sc->nr_scanned changed at least once since shrink_zone() was

This is not the sole condition that would exit that loop, but it
requires other processes to change the zone state, as the reclaimer that
is stuck obviously can not anymore.

This is only happening for higher-order allocations, where reclaim is
run back to back with compaction.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Michal Hocko <mhocko@suse.cz>
Tested-by: Kent Overstreet<kent.overstreet@gmail.com>
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomlock: do not munlock pages in __do_fault()
Michel Lespinasse [Thu, 10 Feb 2011 23:01:33 +0000]
mlock: do not munlock pages in __do_fault()

If the page is going to be written to, __do_page needs to break COW.

However, the old page (before breaking COW) was never mapped mapped into
the current pte (__do_fault is only called when the pte is not present),
so vmscan can't have marked the old page as PageMlocked due to being
mapped in __do_fault's VMA.  Therefore, __do_fault() does not need to
worry about clearing PageMlocked() on the old page.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomlock: fix race when munlocking pages in do_wp_page()
Michel Lespinasse [Thu, 10 Feb 2011 23:01:32 +0000]
mlock: fix race when munlocking pages in do_wp_page()

vmscan can lazily find pages that are mapped within VM_LOCKED vmas, and
set the PageMlocked bit on these pages, transfering them onto the
unevictable list.  When do_wp_page() breaks COW within a VM_LOCKED vma,
it may need to clear PageMlocked on the old page and set it on the new
page instead.

This change fixes an issue where do_wp_page() was clearing PageMlocked
on the old page while the pte was still pointing to it (as well as
rmap).  Therefore, we were not protected against vmscan immediately
transfering the old page back onto the unevictable list.  This could
cause pages to get stranded there forever.

I propose to move the corresponding code to the end of do_wp_page(),
after the pte (and rmap) have been pointed to the new page.
Additionally, we can use munlock_vma_page() instead of
clear_page_mlock(), so that the old page stays mlocked if there are
still other VM_LOCKED vmas mapping it.

Signed-off-by: Michel Lespinasse <walken@google.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomemblock: don't adjust size in memblock_find_base()
Yinghai Lu [Thu, 10 Feb 2011 23:01:30 +0000]
memblock: don't adjust size in memblock_find_base()

While applying patch to use memblock to find aperture for 64bit x86.
Ingo found system with 1g + force_iommu

> No AGP bridge found
> Node 0: aperture @ 38000000 size 32 MB
> Aperture pointing to e820 RAM. Ignoring.
> Your BIOS doesn't leave a aperture memory hole
> Please enable the IOMMU option in the BIOS setup
> This costs you 64 MB of RAM
> Cannot allocate aperture memory hole (0,65536K)

the corresponding code:

addr = memblock_find_in_range(0, 1ULL<<32, aper_size, 512ULL<<20);
if (addr == MEMBLOCK_ERROR || addr + aper_size > 0xffffffff) {
"Cannot allocate aperture memory hole (%lx,%uK)\n",
addr, aper_size>>10);
return 0;
memblock_x86_reserve_range(addr, addr + aper_size, "aperture64")

fails because memblock core code align the size with 512M.  That could
make size way too big.

So don't align the size in that case.

actually __memblock_alloc_base, the another caller already align that
before calling that function.

BTW. x86 does not use __memblock_alloc_base...

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonbd: remove module-level ioctl mutex
Soren Hansen [Thu, 10 Feb 2011 23:01:28 +0000]
nbd: remove module-level ioctl mutex

Commit 2a48fc0ab242417 ("block: autoconvert trivial BKL users to private
mutex") replaced uses of the BKL in the nbd driver with mutex
operations.  Since then, I've been been seeing these lock ups:

 INFO: task qemu-nbd:16115 blocked for more than 120 seconds.
 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
 qemu-nbd      D 0000000000000001     0 16115  16114 0x00000004
  ffff88007d775d98 0000000000000082 ffff88007d775fd8 ffff88007d774000
  0000000000013a80 ffff8800020347e0 ffff88007d775fd8 0000000000013a80
  ffff880133730000 ffff880002034440 ffffea0004333db8 ffffffffa071c020
 Call Trace:
  [<ffffffff815b9997>] __mutex_lock_slowpath+0xf7/0x180
  [<ffffffff815b93eb>] mutex_lock+0x2b/0x50
  [<ffffffffa071a21c>] nbd_ioctl+0x6c/0x1c0 [nbd]
  [<ffffffff812cb970>] blkdev_ioctl+0x230/0x730
  [<ffffffff811967a1>] block_ioctl+0x41/0x50
  [<ffffffff81175c03>] do_vfs_ioctl+0x93/0x370
  [<ffffffff81175f61>] sys_ioctl+0x81/0xa0
  [<ffffffff8100c0c2>] system_call_fastpath+0x16/0x1b

Instrumenting the nbd module's ioctl handler with some extra logging
clearly shows the NBD_DO_IT ioctl being invoked which is a long-lived
ioctl in the sense that it doesn't return until another ioctl asks the
driver to disconnect.  However, that other ioctl blocks, waiting for the
module-level mutex that replaced the BKL, and then we're stuck.

This patch removes the module-level mutex altogether.  It's clearly
wrong, and as far as I can see, it's entirely unnecessary, since the nbd
driver maintains per-device mutexes, and I don't see anything that would
require a module-level (or kernel-level, for that matter) mutex.

Signed-off-by: Soren Hansen <soren@linux2go.dk>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Acked-by: Paul Clements <paul.clements@steeleye.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org> [2.6.37.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-proc.c: add module_put on error path in rtc_proc_open()
Alexander Strakh [Thu, 10 Feb 2011 23:01:25 +0000]
drivers/rtc/rtc-proc.c: add module_put on error path in rtc_proc_open()

In file drivers/rtc/rtc-proc.c seq_open() can return -ENOMEM.

 86        if (!try_module_get(THIS_MODULE))
 87                return -ENODEV;
 89        return single_open(file, rtc_proc_show, rtc);

In this case before exiting (line 89) from rtc_proc_open the
module_put(THIS_MODULE) must be called.

Found by Linux Device Drivers Verification Project

Signed-off-by: Alexander Strakh <strakh@ispras.ru>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/gpio/pca953x.c: add a mutex to fix race condition
Roland Stigge [Thu, 10 Feb 2011 23:01:23 +0000]
drivers/gpio/pca953x.c: add a mutex to fix race condition

Add a mutex to register communication and handling.  Without the mutex,
GPIOs didn't switch as expected when toggled in a fast sequence of
status changes of multiple outputs.

Signed-off-by: Roland Stigge <stigge@antcom.de>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Marc Zyngier <maz@misterjones.org>
Cc: Ben Gardner <bgardner@wabtec.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoptrace: use safer wake up on ptrace_detach()
Tejun Heo [Thu, 10 Feb 2011 23:01:22 +0000]
ptrace: use safer wake up on ptrace_detach()

The wake_up_process() call in ptrace_detach() is spurious and not
interlocked with the tracee state.  IOW, the tracee could be running or
sleeping in any place in the kernel by the time wake_up_process() is
called.  This can lead to the tracee waking up unexpectedly which can be

The wake_up is spurious and should be removed but for now reduce its
toxicity by only waking up if the tracee is in TRACED or STOPPED state.

This bug can possibly be used as an attack vector.  I don't think it
will take too much effort to come up with an attack which triggers oops
somewhere.  Most sleeps are wrapped in condition test loops and should
be safe but we have quite a number of places where sleep and wakeup
conditions are expected to be interlocked.  Although the window of
opportunity is tiny, ptrace can be used by non-privileged users and with
some loading the window can definitely be extended and exploited.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agovfs: call rcu_barrier after ->kill_sb()
Boaz Harrosh [Thu, 10 Feb 2011 23:01:20 +0000]
vfs: call rcu_barrier after ->kill_sb()

In commit fa0d7e3de6d6 ("fs: icache RCU free inodes"), we use rcu free
inode instead of freeing the inode directly.  It causes a crash when we
rmmod immediately after we umount the volume[1].

So we need to call rcu_barrier after we kill_sb so that the inode is
freed before we do rmmod.  The idea is inspired by Aneesh Kumar.
rcu_barrier will wait for all callbacks to end before preceding.  The
original patch was done by Tao Ma, but synchronize_rcu() is not enough

1. http://marc.info/?l=linux-fsdevel&m=129680863330185&w=2

Tested-by: Tao Ma <boyu.mt@taobao.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoFix possible filp_cachep memory corruption
Linus Torvalds [Fri, 11 Feb 2011 23:53:38 +0000]
Fix possible filp_cachep memory corruption

In commit 31e6b01f4183 ("fs: rcu-walk for path lookup") we started doing
path lookup using RCU, which then falls back to a careful non-RCU lookup
in case of problems (LOOKUP_REVAL).  So do_filp_open() has this "re-do
the lookup carefully" looping case.

However, that means that we must not release the open-intent file data
if we are going to loop around and use it once more!

Fix this by moving the release of the open-intent data to the function
that allocates it (do_filp_open() itself) rather than the helper
functions that can get called multiple times (finish_open() and
do_last()).  This makes the logic for the lifetime of that field much
more obvious, and avoids the possible double free.

Reported-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux...
Russell King [Fri, 11 Feb 2011 22:56:19 +0000]
Merge branch 'fix' of git://git./linux/kernel/git/ycmiao/pxa-linux-2.6 into fixes

8 years agoARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch
Will Deacon [Fri, 11 Feb 2011 15:01:42 +0000]
ARM: 6657/1: hw_breakpoint: fix ptrace breakpoint advertising on unsupported arch

The ptrace debug information register was advertising breakpoint and
watchpoint resources for unsupported debug architectures. This meant
that setting breakpoints on these architectures would appear to succeed,
although they would never fire in reality.

This patch fixes the breakpoint slot probing so that it returns 0 when
running on an unsupported debug architecture.

Reported-by: Ulrich Weigand <ulrich.weigand@de.ibm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

8 years agoARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR
Will Deacon [Fri, 11 Feb 2011 14:55:12 +0000]
ARM: 6656/1: hw_breakpoint: avoid UNPREDICTABLE behaviour when reading DBGDSCR

Reading baseline CP14 registers, other than DBGDIDR, when the OS Lock
is set leads to UNPREDICTABLE behaviour.

This patch ensures that we clear the OS lock before accessing anything
other than the DBGDIDR, thereby avoiding this behaviour.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

8 years agoARM: 6658/1: collie: do actually pass locomo_info to locomo driver
Dmitry Eremin-Solenikov [Fri, 11 Feb 2011 15:26:10 +0000]
ARM: 6658/1: collie: do actually pass locomo_info to locomo driver

locomo_info isn't actually used as a platform_data on collie platform:
 arm/mach-sa1100/collie.c:237: warning: ‘locomo_info’ defined but not used

So locomo driver doesn't setup IRQs correctly. Pass locomo_info to the

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

8 years agoARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL
Dave Martin [Fri, 11 Feb 2011 15:41:20 +0000]
ARM: 6659/1: Thumb-2: Make CONFIG_OABI_COMPAT depend on !CONFIG_THUMB2_KERNEL

rmk says: "You might as well make OABI_COMPAT depend on !THUMB2_KERNEL.
OABI userland is useless without FPA support."

nwfpe doesn't work with Thumb-2 anyway and will probably never get
ported, so I can't argue with that.

This patch implements the dependency change.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

8 years agodlm: use single thread workqueues
David Teigland [Fri, 11 Feb 2011 22:44:31 +0000]
dlm: use single thread workqueues

The recent commit to use cmwq for send and recv threads
dcce240ead802d42b1e45ad2fcb2ed4a399cb255 introduced problems,
apparently due to multiple workqueue threads.  Single threads
make the problems go away, so return to that until we fully
understand the concurrency issues with multiple threads.

Signed-off-by: David Teigland <teigland@redhat.com>

8 years agoInput: matrix_keypad - increase the limit of rows and columns
Trilok Soni [Fri, 11 Feb 2011 08:44:41 +0000]
Input: matrix_keypad - increase the limit of rows and columns

Some keyboard controllers support more than 16 columns and rows.
Increase the limit to 32.

Signed-off-by: Trilok Soni <tsoni@codeaurora.org>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

8 years agoInput: wacom - fix error path in wacom_probe()
Alexander Strakh [Fri, 11 Feb 2011 08:44:41 +0000]
Input: wacom - fix error path in wacom_probe()

If we fail to retrieve HID descriptor we need to free allocated URB so
jump to proper label to do that.

Signed-off-by: Alexander Strakh <strakh@ispras.ru>
Acked-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

8 years agoInput: ads7846 - check proper condition when freeing gpio
Dmitry Torokhov [Fri, 4 Feb 2011 08:37:26 +0000]
Input: ads7846 - check proper condition when freeing gpio

When driver uses custom pendown detection method gpio_pendown is not
set up and so we should not try to free it, otherwise we are presented

------------[ cut here ]------------
WARNING: at drivers/gpio/gpiolib.c:1258 gpio_free+0x100/0x12c()
Modules linked in:
[<c0061208>] (unwind_backtrace+0x0/0xe4) from [<c0091f58>](warn_slowpath_common+0x4c/0x64)
[<c0091f58>] (warn_slowpath_common+0x4c/0x64) from [<c0091f88>](warn_slowpath_null+0x18/0x1c)
[<c0091f88>] (warn_slowpath_null+0x18/0x1c) from [<c024e610>](gpio_free+0x100/0x12c)
[<c024e610>] (gpio_free+0x100/0x12c) from [<c03e9fbc>](ads7846_probe+0xa38/0xc5c)
[<c03e9fbc>] (ads7846_probe+0xa38/0xc5c) from [<c02cff14>](spi_drv_probe+0x18/0x1c)
[<c02cff14>] (spi_drv_probe+0x18/0x1c) from [<c028bca4>](driver_probe_device+0xc8/0x184)
[<c028bca4>] (driver_probe_device+0xc8/0x184) from [<c028bdc8>](__driver_attach+0x68/0x8c)
[<c028bdc8>] (__driver_attach+0x68/0x8c) from [<c028b4c8>](bus_for_each_dev+0x48/0x74)
[<c028b4c8>] (bus_for_each_dev+0x48/0x74) from [<c028ae08>](bus_add_driver+0xa0/0x220)
[<c028ae08>] (bus_add_driver+0xa0/0x220) from [<c028c0c0>](driver_register+0xa8/0x134)
[<c028c0c0>] (driver_register+0xa8/0x134) from [<c0050550>](do_one_initcall+0xcc/0x1a4)
[<c0050550>] (do_one_initcall+0xcc/0x1a4) from [<c00084e4>](kernel_init+0x14c/0x214)
[<c00084e4>] (kernel_init+0x14c/0x214) from [<c005b494>](kernel_thread_exit+0x0/0x8)
---[ end trace 4053287f8a5ec18f ]---

Also rearrange ads7846_setup_pendown() to have only one exit point
returning success.

Reported-by: Sourav Poddar <sourav.poddar@ti.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Reviewed-by: Charulatha V <charu@ti.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

8 years agoALSA: hda - add quirk for Ordissimo EVE using a realtek ALC662
Anisse Astier [Thu, 10 Feb 2011 12:14:44 +0000]
ALSA: hda - add quirk for Ordissimo EVE using a realtek ALC662

This netbook has a only one jack output and an internal mic.

By default, mic and jack sense aren't working. Using lenovo-101e
parameters makes both work.

The device seems based on a Sharetronic Q70, so this should fix audio for
this model too.

Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

8 years agopci: use security_capable() when checking capablities during config space read
Chris Wright [Thu, 10 Feb 2011 23:58:56 +0000]
pci: use security_capable() when checking capablities during config space read

Eric Paris noted that commit de139a3 ("pci: check caps from sysfs file
open to read device dependent config space") caused the capability check
to bypass security modules and potentially auditing.  Rectify this by
calling security_capable() when checking the open file's capabilities
for config space reads.

Reported-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agosecurity: add cred argument to security_capable()
Chris Wright [Thu, 10 Feb 2011 06:11:51 +0000]
security: add cred argument to security_capable()

Expand security_capable() to include cred, so that it can be usable in a
wider range of call sites.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agoMerge branch 'for-james' of git://tpmdd.git.sourceforge.net/gitroot/tpmdd/tpmdd into...
James Morris [Fri, 11 Feb 2011 06:34:47 +0000]
Merge branch 'for-james' of git://tpmdd.git.sourceforge.net/gitroot/tpmdd/tpmdd into for-linus

8 years agotools: turbostat: style updates
Len Brown [Fri, 11 Feb 2011 04:36:34 +0000]
tools: turbostat: style updates

Follow kernel coding style traditions more closely.
Delete typedef, re-name "per cpu counters" to
simply be counters etc.

This patch changes no functionality.

Suggested-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

8 years agotools: turbostat: fix bitwise and operand
Thomas Renninger [Fri, 21 Jan 2011 14:11:19 +0000]
tools: turbostat: fix bitwise and operand

bug could cause false positive on indicating
presence of invarient TSC or APERF support.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

8 years agocifs: don't always drop malformed replies on the floor (try #3)
Jeff Layton [Thu, 10 Feb 2011 13:03:50 +0000]
cifs: don't always drop malformed replies on the floor (try #3)

Slight revision to this patch...use min_t() instead of conditional
assignment. Also, remove the FIXME comment and replace it with the
explanation that Steve gave earlier.

After receiving a packet, we currently check the header. If it's no
good, then we toss it out and continue the loop, leaving the caller
waiting on that response.

In cases where the packet has length inconsistencies, but the MID is
valid, this leads to unneeded delays. That's especially problematic now
that the client waits indefinitely for responses.

Instead, don't immediately discard the packet if checkSMB fails. Try to
find a matching mid_q_entry, mark it as having a malformed response and
issue the callback.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

8 years agotpm_tis: Use timeouts returned from TPM
Stefan Berger [Tue, 11 Jan 2011 19:37:29 +0000]
tpm_tis: Use timeouts returned from TPM

The current TPM TIS driver in git discards the timeout values returned
from the TPM. The check of the response packet needs to consider that
the return_code field is 0 on success and the size of the expected
packet is equivalent to the header size + u32 length indicator for the
TPM_GetCapability() result + 3 timeout indicators of type u32.

I am also adding a sysfs entry 'timeouts' showing the timeouts that are
being used.

Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Tested-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>

8 years agochar/ipmi: fix OOPS caused by pnp_unregister_driver on unregistered driver
Corey Minyard [Thu, 10 Feb 2011 22:08:38 +0000]
char/ipmi: fix OOPS caused by pnp_unregister_driver on unregistered driver

This patch fixes an OOPS triggered when calling modprobe ipmi_si a
second time after the first modprobe returned without finding any ipmi
devices.  This can happen if you reload the module after having the
first module load fail.  The driver was not deregistering from PNP in
that case.

Peter Huewe originally reported this patch and supplied a fix, I have a
different patch based on Linus' suggestion that cleans things up a bit

Cc: stable@kernel.org
Cc: openipmi-developer@lists.sourceforge.net
Reviewed-by: Peter Huewe <peterhuewe@gmx.de>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agocap_syslog: accept CAP_SYS_ADMIN for now
Linus Torvalds [Fri, 11 Feb 2011 01:53:55 +0000]
cap_syslog: accept CAP_SYS_ADMIN for now

In commit ce6ada35bdf7 ("security: Define CAP_SYSLOG") Serge Hallyn
introduced CAP_SYSLOG, but broke backwards compatibility by no longer
accepting CAP_SYS_ADMIN as an override (it would cause a warning and
then reject the operation).

Re-instate CAP_SYS_ADMIN - but keeping the warning - as an acceptable
capability until any legacy applications have been updated.  There are
apparently applications out there that drop all capabilities except for
CAP_SYS_ADMIN in order to access the syslog.

(This is a re-implementation of a patch by Serge, cleaning the logic up
and making the code more readable)

Acked-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h
Mark Brown [Mon, 7 Feb 2011 01:51:04 +0000]
ARM: SAMSUNG: Ensure struct sys_device is declared in plat/pm.h

Previously we were relying on it being pulled in by other headers for
the prototype of s3c24xx_irq_suspend() and s3c24xx_irq_resume().

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>