7 years agoPM: Implement wakelock api.
Arve Hjønnevåg [Wed, 10 Sep 2008 05:14:34 +0000]
PM: Implement wakelock api.

PM: wakelock: Replace expire work with a timer

The expire work function did not work in the normal case.

Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoPM: Add early suspend api.
Arve Hjønnevåg [Sat, 27 Sep 2008 05:10:56 +0000]
PM: Add early suspend api.

7 years agoPM: Add wake lock api.
Arve Hjønnevåg [Sat, 27 Sep 2008 05:10:56 +0000]
PM: Add wake lock api.

7 years ago[docs] android: Add android config documentation to boot framework.
Mike Chan [Thu, 22 Jan 2009 20:23:32 +0000]
[docs] android: Add android config documentation to boot framework.

Signed-off-by: Mike Chan <mike@android.com>

7 years agomtd: nand: Allow NAND chip ids to be included standalone.
Dima Zavin [Thu, 4 Dec 2008 20:19:57 +0000]
mtd: nand: Allow NAND chip ids to be included standalone.

Lets non-standard NAND drivers take advantage of known NAND
chip information.

Change-Id: I87e2fcb40b07b2ec91e102f1fa7f419a4b4af0a3
Signed-off-by: Dima Zavin <dima@android.com>

7 years agoMake /dev/mem configurable, as we don't want it.
Robert Love [Tue, 29 Apr 2008 20:44:10 +0000]
Make /dev/mem configurable, as we don't want it.

Signed-off-by: Brian Swetland <swetland@google.com>

7 years agosched: Enable might_sleep before initializing drivers.
Arve Hjønnevåg [Thu, 11 Dec 2008 04:06:28 +0000]
sched: Enable might_sleep before initializing drivers.

This allows detection of init bugs in built-in drivers.

Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoAdd build option to to set the default panic timeout.
Arve Hjønnevåg [Tue, 8 May 2007 08:39:13 +0000]
Add build option to to set the default panic timeout.

7 years ago[ARM] Optionally flush entire dcache from v6_dma_flush_range
Arve Hjønnevåg [Wed, 10 Jun 2009 03:17:45 +0000]
[ARM] Optionally flush entire dcache from v6_dma_flush_range

If CACHE_FLUSH_RANGE_LIMIT is defined, then the entire dcache will
be flushed if the requested range is larger than this limit.

Change-Id: I29277d645a9d6716b1952cf3b870c78496261dd0
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agomm: Add min_free_order_shift tunable.
Arve Hjønnevåg [Tue, 17 Feb 2009 22:51:02 +0000]
mm: Add min_free_order_shift tunable.

By default the kernel tries to keep half as much memory free at each
order as it does for one order below. This can be too agressive when
running without swap.

Change-Id: I5efc1a0b50f41ff3ac71e92d2efd175dedd54ead
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years ago[ARM] avoid mis-detecting some V7 cores in the decompressor
Brian Swetland [Tue, 27 Jan 2009 01:15:49 +0000]
[ARM] avoid mis-detecting some V7 cores in the decompressor

This allows kernel decompress to happen nearly instantly instead
of taking over 20 seconds.

Signed-off-by: Brian Swetland <swetland@google.com>

7 years ago[ARM] armv6 dcc tty driver
Arve Hjønnevåg [Sun, 2 Dec 2007 02:34:14 +0000]
[ARM] armv6 dcc tty driver

Signed-off-by: Brian Swetland <swetland@google.com>
Signed-off-by: Arve Hjønnevåg <arve@android.com>

7 years agoARM: Make low-level printk work
Tony Lindgren [Mon, 9 May 2005 21:10:26 +0000]
ARM: Make low-level printk work

Makes low-level printk work.

Signed-off-by: Tony Lindgren <tony@atomide.com>

7 years agoRevert "Staging: android: mark subsystem as broken"
Arve Hjønnevåg [Wed, 9 Dec 2009 04:37:55 +0000]
Revert "Staging: android: mark subsystem as broken"

This reverts commit 2cdf99ce2b9418c9d7c5f907195cfac421375520.

7 years agostaging/android: fix build issues
Corentin Chary [Sat, 28 Nov 2009 08:45:14 +0000]
staging/android: fix build issues

Signed-off-by: Corentin Chary <corentincj@iksaif.net>

7 years agoRevert "Staging: android: delete android drivers"
Arve Hjønnevåg [Sat, 13 Feb 2010 04:32:37 +0000]
Revert "Staging: android: delete android drivers"

This reverts commit b0a0ccfad85b3657fe999805df65f5cfe634ab8a.

7 years agoLinux 3.1.4
Greg Kroah-Hartman [Mon, 28 Nov 2011 22:48:14 +0000]
Linux 3.1.4

7 years agoRevert "USB: EHCI: fix HUB TT scheduling issue with iso transfer"
Greg Kroah-Hartman [Mon, 28 Nov 2011 22:40:10 +0000]
Revert "USB: EHCI: fix HUB TT scheduling issue with iso transfer"

This reverts commit f0cc710a6dec5b808a6f13f1f8853c094fce5f12.

Cc: Matthieu Castet <matthieu.castet@parrot.com>
Cc: Thomas Poussevin <thomas.poussevin@parrot.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoLinux 3.1.3
Greg Kroah-Hartman [Sat, 26 Nov 2011 17:08:57 +0000]
Linux 3.1.3

7 years agovmscan: fix shrinker callback bug in fs/super.c
Mikulas Patocka [Tue, 1 Nov 2011 00:08:57 +0000]
vmscan: fix shrinker callback bug in fs/super.c

commit 09f363c7363eb10cfb4b82094bd7064e5608258b upstream.

The callback must not return -1 when nr_to_scan is zero. Fix the bug in
fs/super.c and add this requirement to the callback specification.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Dave Chinner <david@fromorbit.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agobatman-adv: unify hash_entry field position in tt_local/global_entry
Antonio Quartulli [Fri, 21 Oct 2011 22:55:39 +0000]
batman-adv: unify hash_entry field position in tt_local/global_entry

commit 93840ac40bb0d0f177ef8af74e64671be67e8c37 upstream.

Function tt_response_fill_table() actually uses a tt_local_entry pointer to
iterate either over the local or the global table entries (it depends on the
what hash table is passed as argument). To iterate over such entries the
hlist_for_each_entry_rcu() macro has to access their "hash_entry" field which
MUST be at the same position in both the tt_global/local_entry structures.

Reported-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agobatman-adv: add sanity check when removing global tts
Simon Wunderlich [Wed, 19 Oct 2011 08:28:26 +0000]
batman-adv: add sanity check when removing global tts

commit 6e8014947d6469df1566e9e253805557c5c0e4e0 upstream.

After removing the batman-adv module, the hash may be already gone
when tt_global_del_orig() tries to clean the hash. This patch adds
a sanity check to avoid this.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Tested-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agobatman-adv: remove references for global tt entries
Simon Wunderlich [Wed, 19 Oct 2011 09:02:25 +0000]
batman-adv: remove references for global tt entries

commit 531027fcddbcf81c9937dd04f08a7e8f11fd47d2 upstream.

struct tt_global_entry holds a reference to an orig_node which must be
decremented before deallocating the structure.

Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Tested-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agobatman-adv: correctly set the data field in the TT_REPONSE packet
Antonio Quartulli [Mon, 17 Oct 2011 12:25:13 +0000]
batman-adv: correctly set the data field in the TT_REPONSE packet

commit 9d8523931f7f5eb8900077f0da0fbe6b8ad0010b upstream.

In the TT_RESPONSE packet, the number of carried entries is not correctly set.
This leads to a wrong interpretation of the packet payload on the receiver side
causing random entries to be added to the global translation table. Therefore
the latter gets always corrupted, triggering a table recovery all the time.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agobatman-adv: fix tt_local_reset_flags() function
Antonio Quartulli [Sun, 16 Oct 2011 16:53:37 +0000]
batman-adv: fix tt_local_reset_flags() function

commit 31901264511cf20c5ed33b8649a3ca9ce28df60b upstream.

Currently the counter of tt_local_entry structures (tt_local_num) is incremented
each time the tt_local_reset_flags() is invoked causing the node to send wrong
TT_REPONSE packets containing a copy of non-initialised memory thus corrupting
other nodes global translation table and making higher level communication
impossible.

Reported-by: Junkeun Song <jun361@gmail.com>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Acked-by: Junkeun Song <jun361@gmail.com>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/i915: always set FDI composite sync bit
Jesse Barnes [Mon, 10 Oct 2011 21:28:52 +0000]
drm/i915: always set FDI composite sync bit

commit c4f9c4c2b3f1831e932e04db992cf6fe92c2a95a upstream.

It's needed for 3 pipe support as well as just regular functionality
(e.g. DisplayPort).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Adam Jackson <ajax@redhat.com>
Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Robert Hooker <robert.hooker@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/i915: fix IVB cursor support
Jesse Barnes [Wed, 12 Oct 2011 18:10:21 +0000]
drm/i915: fix IVB cursor support

commit 65a21cd65316145f9302594be8e69074369e1050 upstream.

The cursor regs have moved around, add the offsets and new macros for
getting at them.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: Eugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: Eugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Robert Hooker <robert.hooker@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: quirks: adding more quirky webcams to avoid squeaky audio
sordna [Fri, 28 Oct 2011 04:06:26 +0000]
USB: quirks: adding more quirky webcams to avoid squeaky audio

commit 0d145d7d4a241c321c832a810bb6edad18e2217b upstream.

The following patch contains additional affected webcam models, on top of the
patches commited to linux-next 2394d67e446bf616a0885167d5f0d397bdacfdfc
and 5b253d88cc6c65a23cefc457a5a4ef139913c5fc

Signed-off-by: sordna <sordna@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: add quirk for Logitech C600 web cam
Josh Boyer [Wed, 26 Oct 2011 17:53:17 +0000]
USB: add quirk for Logitech C600 web cam

commit 60c71ca972a2dd3fd9d0165b405361c8ad48349b upstream.

We've had another report of the "chipmunk" sound on a Logitech C600 webcam.
This patch resolves the issue.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: EHCI: fix HUB TT scheduling issue with iso transfer
Thomas Poussevin [Thu, 27 Oct 2011 16:46:48 +0000]
USB: EHCI: fix HUB TT scheduling issue with iso transfer

commit 811c926c538f7e8d3c08b630dd5844efd7e000f6 upstream.

The current TT scheduling doesn't allow to play and then record on a
full-speed device connected to a high speed hub.

The IN iso stream can only start on the first uframe (0-2 for a 165 us)
because of CSPLIT transactions.
For the OUT iso stream there no such restriction. uframe 0-5 are possible.

The idea of this patch is that the first uframe are precious (for IN TT iso
stream) and we should allocate the last uframes first if possible.

For that we reverse the order of uframe allocation (last uframe first).

Here an example :

hid interrupt stream
----------------------------------------------------------------------
uframe                |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
----------------------------------------------------------------------
max_tt_usecs          | 125 | 125 | 125 | 125 | 125 | 125 | 30  |  0  |
----------------------------------------------------------------------
used usecs on a frame | 13  |  0  |  0  |  0  |  0  |  0  |  0  |  0  |
----------------------------------------------------------------------

iso OUT stream
----------------------------------------------------------------------
uframe                |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
----------------------------------------------------------------------
max_tt_usecs          | 125 | 125 | 125 | 125 | 125 | 125 | 30  |  0  |
----------------------------------------------------------------------
used usecs on a frame | 13  | 125 |  39 |  0  |  0  |  0  |  0  |  0  |
----------------------------------------------------------------------

There no place for iso IN stream  (uframe 0-2 are used) and we got "cannot
submit datapipe for urb 0, error -28: not enough bandwidth" error.

With the patch this become.

iso OUT stream
----------------------------------------------------------------------
uframe                |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
----------------------------------------------------------------------
max_tt_usecs          | 125 | 125 | 125 | 125 | 125 | 125 | 30  |  0  |
----------------------------------------------------------------------
used usecs on a frame |  13 |  0  |  0  |  0  | 125 |  39 |  0  |  0  |
----------------------------------------------------------------------

iso IN stream
----------------------------------------------------------------------
uframe                |  0  |  1  |  2  |  3  |  4  |  5  |  6  |  7  |
----------------------------------------------------------------------
max_tt_usecs          | 125 | 125 | 125 | 125 | 125 | 125 | 30  |  0  |
----------------------------------------------------------------------
used usecs on a frame |  13 |  0  | 125 | 40  | 125 |  39 |  0  |  0  |
----------------------------------------------------------------------

Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com>
Signed-off-by: Thomas Poussevin <thomas.poussevin@parrot.com>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousb-storage: Accept 8020i-protocol commands longer than 12 bytes
Alan Stern [Tue, 25 Oct 2011 14:50:58 +0000]
usb-storage: Accept 8020i-protocol commands longer than 12 bytes

commit 2f640bf4c94324aeaa1b6385c10aab8c5ad1e1cf upstream.

The 8020i protocol (also 8070i and QIC-157) uses 12-byte commands;
shorter commands must be padded.  Simon Detheridge reports that his
3-TB USB disk drive claims to use the 8020i protocol (which is
normally meant for ATAPI devices like CD drives), and because of its
large size, the disk drive requires the use of 16-byte commands.
However the usb_stor_pad12_command() routine in usb-storage always
sets the command length to 12, making the drive impossible to use.

Since the SFF-8020i specification allows for 16-byte commands in
future extensions, we may as well accept them.  This patch (as1490)
changes usb_stor_pad12_command() to leave commands larger than 12
bytes alone rather than truncating them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Simon Detheridge <simon@widgit.com>
CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: Fix Corruption issue in USB ftdi driver ftdi_sio.c
Andrew Worsley [Fri, 18 Nov 2011 12:13:33 +0000]
USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c

commit b1ffb4c851f185e9051ba837c16d9b84ef688d26 upstream.

Fix for ftdi_set_termios() glitching output

ftdi_set_termios() is constantly setting the baud rate, data bits and parity
unnecessarily on every call, . When called while characters are being
transmitted can cause the FTDI chip to corrupt the serial port bit stream
output by stalling the output half a bit during the output of a character.
Simple fix by skipping this setting if the baud rate/data bits/parity are
unchanged.

Signed-off-by: Andrew Worsley <amworsley@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: ark3116 initialisation fix
Bart Hartgers [Wed, 26 Oct 2011 11:29:42 +0000]
USB: ark3116 initialisation fix

commit 583182ba5f02c8c9be82ea550f2051eaec15b975 upstream.

This patch for the usb serial ark3116 driver fixes an initialisation
ordering bug that gets triggered on hotplug when using at least recent
debian/ubuntu userspace. Without it, ark3116 serial cables don't work.

Signed-off-by: Bart Hartgers <bart.hartgers@gmail.com>
Tested-by: law_ence.dev@ntlworld.com
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: workaround for bug in old version of GCC
Alan Stern [Thu, 27 Oct 2011 15:20:21 +0000]
USB: workaround for bug in old version of GCC

commit 97ff22ee3b4cb3a334f7385e269773141aed702f upstream.

This patch (as1491) works around a bug in GCC-3.4.6, which is still
supposed to be supported.  The number of microseconds in the udelay()
call in quirk_usb_disable_ehci() is fixed at 100, but the compiler
doesn't understand this and generates a link-time error.  So we
replace the otherwise unused variable "delta" with a simple constant
100.  This same pattern is already used in other delay loops in that
source file.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Konrad Rzepecki <krzepecki@dentonet.pl>
Tested-by: Konrad Rzepecki <krzepecki@dentonet.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: cdc-acm: Fix disconnect() vs close() race
Havard Skinnemoen [Wed, 9 Nov 2011 21:47:38 +0000]
USB: cdc-acm: Fix disconnect() vs close() race

commit 5dc2470c602da8851907ec18942cd876c3b4ecc1 upstream.

There's a race between the USB disconnect handler and the TTY close
handler which may cause the acm object to be freed while it's still
being used. This may lead to things like

http://article.gmane.org/gmane.linux.usb.general/54250

and

https://lkml.org/lkml/2011/5/29/64

This is the simplest fix I could come up with. Holding on to open_mutex
while closing the TTY device prevents acm_disconnect() from freeing the
acm object between acm->port.count drops to 0 and the TTY side of the
cleanups are finalized.

Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Cc: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH
Tomoya MORINAGA [Fri, 28 Oct 2011 00:37:34 +0000]
USB: pch_udc: Support new device LAPIS Semiconductor ML7831 IOH

commit 731ad81e2dd97e3f222361f7b3ff4b35639e46af upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: serial: pl2303: rm duplicate id
wangyanqing [Thu, 10 Nov 2011 06:04:08 +0000]
USB: serial: pl2303: rm duplicate id

commit 0c16595539b612fe948559433dda08ff96a8bdc7 upstream.

I get report from customer that his usb-serial
converter doesn't work well,it sometimes work,
but sometimes it doesn't.

The usb-serial converter's id:
vendor_id product_id
0x4348    0x5523

Then I search the usb-serial codes, and there are
two drivers announce support this device, pl2303
and ch341, commit 026dfaf1 cause it. Through many
times to test, ch341 works well with this device,
and pl2303 doesn't work quite often(it just work quite little).

ch341 works well with this device, so we doesn't
need pl2303 to support.I try to revert 026dfaf1 first,
but it failed. So I prepare this patch by hand to revert it.

Signed-off-by: Wang YanQing <Udknight@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: option: add PID of Huawei E173s 3G modem
Ferenc Wagner [Thu, 17 Nov 2011 15:44:58 +0000]
USB: option: add PID of Huawei E173s 3G modem

commit 4aa3648c719265bac9c2742c9ebb043e6dbdd790 upstream.

Signed-off-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: option: release new PID for ZTE 3G modem
zheng.zhijian@zte.com.cn [Thu, 17 Nov 2011 11:23:25 +0000]
USB: option: release new PID for ZTE 3G modem

commit 46b5a277ed90317a4d17e936c16037e76011b219 upstream.

This patch adds new PIDs for ZTE 3G modem, after we confirm it and tested.
Thanks for Dan's work at kernel option devier.

Signed-off-by: Alvin.Zheng <zheng.zhijian@zte.com.cn>
Signed-off-by: wsalvin <wsalvin@yahoo.com.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoUSB: XHCI: resume root hubs when the controller resumes
Alan Stern [Thu, 3 Nov 2011 15:37:10 +0000]
USB: XHCI: resume root hubs when the controller resumes

commit f69e3120df82391a0ee8118e0a156239a06b2afb upstream.

This patch (as1494) fixes a problem in xhci-hcd's resume routine.
When the controller is runtime-resumed, this can only mean that one of
the two root hubs has made a wakeup request and therefore needs to be
resumed as well.  Rather than try to determine which root hub requires
attention (which might be difficult in the case where a new
non-SuperSpeed device has been plugged in), the patch simply resumes
both root hubs.

Without this change, there is a race: The controller might be put back
to sleep before it can activate its IRQ line, and the wakeup condition
might never get handled.

The patch also simplifies the logic in xhci_resume a little, combining
some repeated flag settings into a single pair of statements.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousb, xhci: fix lockdep warning on endpoint timeout
Don Zickus [Fri, 21 Oct 2011 03:52:14 +0000]
usb, xhci: fix lockdep warning on endpoint timeout

commit f43d623164022dcbf6750ef220b7a1133a1183eb upstream.

While debugging a usb3 problem, I stumbled upon this lockdep warning.

Oct 18 21:41:17 dhcp47-74 kernel: =================================
Oct 18 21:41:17 dhcp47-74 kernel: [ INFO: inconsistent lock state ]
Oct 18 21:41:17 dhcp47-74 kernel: 3.1.0-rc4nmi+ #456
Oct 18 21:41:17 dhcp47-74 kernel: ---------------------------------
Oct 18 21:41:17 dhcp47-74 kernel: inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
Oct 18 21:41:17 dhcp47-74 kernel: swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes:
Oct 18 21:41:17 dhcp47-74 kernel: (&(&xhci->lock)->rlock){?.-...}, at: [<ffffffffa0228990>] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd]
Oct 18 21:41:17 dhcp47-74 kernel: {IN-HARDIRQ-W} state was registered at:
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8109a941>] __lock_acquire+0x781/0x1660
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8109bed7>] lock_acquire+0x97/0x170
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff81501b46>] _raw_spin_lock+0x46/0x80
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffffa02299fa>] xhci_irq+0x3a/0x1960 [xhci_hcd]
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffffa022b351>] xhci_msi_irq+0x31/0x40 [xhci_hcd]
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff810d2305>] handle_irq_event_percpu+0x85/0x320
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff810d25e8>] handle_irq_event+0x48/0x70
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff810d537d>] handle_edge_irq+0x6d/0x130
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff810048c9>] handle_irq+0x49/0xa0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8150d56d>] do_IRQ+0x5d/0xe0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff815029b0>] ret_from_intr+0x0/0x13
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff81388aca>] usb_set_device_state+0x8a/0x180
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8138f038>] usb_add_hcd+0x2b8/0x730
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffffa022ed7e>] xhci_pci_probe+0x9e/0xd4 [xhci_hcd]
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8127915f>] local_pci_probe+0x5f/0xd0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8127a569>] pci_device_probe+0x119/0x120
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff81334473>] driver_probe_device+0xa3/0x2c0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8133473b>] __driver_attach+0xab/0xb0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8133373c>] bus_for_each_dev+0x6c/0xa0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff813341fe>] driver_attach+0x1e/0x20
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff81333b88>] bus_add_driver+0x1f8/0x2b0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff81334df6>] driver_register+0x76/0x140
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8127a7c6>] __pci_register_driver+0x66/0xe0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffffa013c04a>] snd_timer_find+0x4a/0x70 [snd_timer]
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffffa013c00e>] snd_timer_find+0xe/0x70 [snd_timer]
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff810001d3>] do_one_initcall+0x43/0x180
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff810a9ed2>] sys_init_module+0x92/0x1f0
Oct 18 21:41:17 dhcp47-74 kernel:  [<ffffffff8150ab6b>] system_call_fastpath+0x16/0x1b
Oct 18 21:41:17 dhcp47-74 kernel: irq event stamp: 631984
Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last  enabled at (631984): [<ffffffff81502720>] _raw_spin_unlock_irq+0x30/0x50
Oct 18 21:41:17 dhcp47-74 kernel: hardirqs last disabled at (631983): [<ffffffff81501c49>] _raw_spin_lock_irq+0x19/0x90
Oct 18 21:41:17 dhcp47-74 kernel: softirqs last  enabled at (631980): [<ffffffff8105ff63>] _local_bh_enable+0x13/0x20
Oct 18 21:41:17 dhcp47-74 kernel: softirqs last disabled at (631981): [<ffffffff8150ce6c>] call_softirq+0x1c/0x30
Oct 18 21:41:17 dhcp47-74 kernel:
Oct 18 21:41:17 dhcp47-74 kernel: other info that might help us debug this:
Oct 18 21:41:17 dhcp47-74 kernel: Possible unsafe locking scenario:
Oct 18 21:41:17 dhcp47-74 kernel:
Oct 18 21:41:17 dhcp47-74 kernel:       CPU0
Oct 18 21:41:17 dhcp47-74 kernel:       ----
Oct 18 21:41:17 dhcp47-74 kernel:  lock(&(&xhci->lock)->rlock);
Oct 18 21:41:17 dhcp47-74 kernel:  <Interrupt>
Oct 18 21:41:17 dhcp47-74 kernel:    lock(&(&xhci->lock)->rlock);
Oct 18 21:41:17 dhcp47-74 kernel:
Oct 18 21:41:17 dhcp47-74 kernel: *** DEADLOCK ***
Oct 18 21:41:17 dhcp47-74 kernel:
Oct 18 21:41:17 dhcp47-74 kernel: 1 lock held by swapper/0:
Oct 18 21:41:17 dhcp47-74 kernel: #0:  (&ep->stop_cmd_timer){+.-...}, at: [<ffffffff8106abf2>] run_timer_softirq+0x162/0x570
Oct 18 21:41:17 dhcp47-74 kernel:
Oct 18 21:41:17 dhcp47-74 kernel: stack backtrace:
Oct 18 21:41:17 dhcp47-74 kernel: Pid: 0, comm: swapper Tainted: G        W   3.1.0-rc4nmi+ #456
Oct 18 21:41:17 dhcp47-74 kernel: Call Trace:
Oct 18 21:41:17 dhcp47-74 kernel: <IRQ>  [<ffffffff81098ed7>] print_usage_bug+0x227/0x270
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810999c6>] mark_lock+0x346/0x410
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8109a7de>] __lock_acquire+0x61e/0x1660
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81099893>] ? mark_lock+0x213/0x410
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8109bed7>] lock_acquire+0x97/0x170
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa0228990>] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd]
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81501b46>] _raw_spin_lock+0x46/0x80
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa0228990>] ? xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd]
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa0228990>] xhci_stop_endpoint_command_watchdog+0x30/0x340 [xhci_hcd]
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8106abf2>] ? run_timer_softirq+0x162/0x570
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8106ac9d>] run_timer_softirq+0x20d/0x570
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8106abf2>] ? run_timer_softirq+0x162/0x570
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffffa0228960>] ? xhci_queue_isoc_tx_prepare+0x8e0/0x8e0 [xhci_hcd]
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff810604d2>] __do_softirq+0xf2/0x3f0
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81020edd>] ? lapic_next_event+0x1d/0x30
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81090d4e>] ? clockevents_program_event+0x5e/0x90
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8150ce6c>] call_softirq+0x1c/0x30
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8100484d>] do_softirq+0x8d/0xc0
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8105ff35>] irq_exit+0xe5/0x100
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8150d65e>] smp_apic_timer_interrupt+0x6e/0x99
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff8150b6f0>] apic_timer_interrupt+0x70/0x80
Oct 18 21:41:17 dhcp47-74 kernel: <EOI>  [<ffffffff81095d8d>] ? trace_hardirqs_off+0xd/0x10
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff812ddb76>] ? acpi_idle_enter_bm+0x227/0x25b
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff812ddb71>] ? acpi_idle_enter_bm+0x222/0x25b
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff813eda63>] cpuidle_idle_call+0x103/0x290
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81002155>] cpu_idle+0xe5/0x160
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff814e7f50>] rest_init+0xe0/0xf0
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff814e7e70>] ? csum_partial_copy_generic+0x170/0x170
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81df8e23>] start_kernel+0x3fc/0x407
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81df8321>] x86_64_start_reservations+0x131/0x135
Oct 18 21:41:17 dhcp47-74 kernel: [<ffffffff81df8412>] x86_64_start_kernel+0xed/0xf4
Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: xHCI host not responding to stop endpoint command.
Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: Assuming host is dying, halting host.
Oct 18 21:41:17 dhcp47-74 kernel: xhci_hcd 0000:00:14.0: HC died; cleaning up
Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -110
Oct 18 21:41:17 dhcp47-74 kernel: usb 3-4: device descriptor read/8, error -22
Oct 18 21:41:17 dhcp47-74 kernel: hub 3-0:1.0: cannot disable port 4 (err = -19)

Basically what is happening is in xhci_stop_endpoint_command_watchdog()
the xhci->lock is grabbed with just spin_lock.  What lockdep deduces is
that if an interrupt occurred while in this function it would deadlock
with xhci_irq because that function also grabs the xhci->lock.

Fixing it is trivial by using spin_lock_irqsave instead.

This should be queued to stable kernels as far back as 2.6.33.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agousb, xhci: Clear warm reset change event during init
Don Zickus [Thu, 3 Nov 2011 13:07:18 +0000]
usb, xhci: Clear warm reset change event during init

commit 79c3dd8150fd5236d95766a9e662e3e932b462c9 upstream.

I noticed on my Panther Point system that I wasn't getting hotplug events
for my usb3.0 disk on a usb3 port.  I tracked it down to the fact that the
system had the warm reset change bit still set.  This seemed to block future
events from being received, including a hotplug event.

Clearing this bit during initialization allowed the hotplug event to be
received and the disk to be recognized correctly.

This patch should be backported to kernels as old as 2.6.39.

Signed-off-by: Don Zickus <dzickus@redhat.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxhci: Set slot and ep0 flags for address command.
Sarah Sharp [Thu, 3 Nov 2011 20:06:08 +0000]
xhci: Set slot and ep0 flags for address command.

commit d31c285b3a71cf9056e6a060de41f37780b0af86 upstream.

Matt's AsMedia xHCI host controller was responding with a Context Error
to an address device command after a configured device reset.  Some
sequence of events leads both the slot and endpoint zero add flags
cleared to zero, which the AsMedia host doesn't like:

[  223.701839] xhci_hcd 0000:03:00.0: Slot ID 1 Input Context:
[  223.701841] xhci_hcd 0000:03:00.0: @ffff880137b25000 (virt) @ffffc000 (dma) 0x000000 - drop flags
[  223.701843] xhci_hcd 0000:03:00.0: @ffff880137b25004 (virt) @ffffc004 (dma) 0x000000 - add flags
[  223.701846] xhci_hcd 0000:03:00.0: @ffff880137b25008 (virt) @ffffc008 (dma) 0x000000 - rsvd2[0]
[  223.701848] xhci_hcd 0000:03:00.0: @ffff880137b2500c (virt) @ffffc00c (dma) 0x000000 - rsvd2[1]
[  223.701850] xhci_hcd 0000:03:00.0: @ffff880137b25010 (virt) @ffffc010 (dma) 0x000000 - rsvd2[2]
[  223.701852] xhci_hcd 0000:03:00.0: @ffff880137b25014 (virt) @ffffc014 (dma) 0x000000 - rsvd2[3]
[  223.701854] xhci_hcd 0000:03:00.0: @ffff880137b25018 (virt) @ffffc018 (dma) 0x000000 - rsvd2[4]
[  223.701857] xhci_hcd 0000:03:00.0: @ffff880137b2501c (virt) @ffffc01c (dma) 0x000000 - rsvd2[5]
[  223.701858] xhci_hcd 0000:03:00.0: Slot Context:
[  223.701860] xhci_hcd 0000:03:00.0: @ffff880137b25020 (virt) @ffffc020 (dma) 0x8400000 - dev_info
[  223.701862] xhci_hcd 0000:03:00.0: @ffff880137b25024 (virt) @ffffc024 (dma) 0x010000 - dev_info2
[  223.701864] xhci_hcd 0000:03:00.0: @ffff880137b25028 (virt) @ffffc028 (dma) 0x000000 - tt_info
[  223.701866] xhci_hcd 0000:03:00.0: @ffff880137b2502c (virt) @ffffc02c (dma) 0x000000 - dev_state
[  223.701869] xhci_hcd 0000:03:00.0: @ffff880137b25030 (virt) @ffffc030 (dma) 0x000000 - rsvd[0]
[  223.701871] xhci_hcd 0000:03:00.0: @ffff880137b25034 (virt) @ffffc034 (dma) 0x000000 - rsvd[1]
[  223.701873] xhci_hcd 0000:03:00.0: @ffff880137b25038 (virt) @ffffc038 (dma) 0x000000 - rsvd[2]
[  223.701875] xhci_hcd 0000:03:00.0: @ffff880137b2503c (virt) @ffffc03c (dma) 0x000000 - rsvd[3]
[  223.701877] xhci_hcd 0000:03:00.0: Endpoint 00 Context:
[  223.701879] xhci_hcd 0000:03:00.0: @ffff880137b25040 (virt) @ffffc040 (dma) 0x000000 - ep_info
[  223.701881] xhci_hcd 0000:03:00.0: @ffff880137b25044 (virt) @ffffc044 (dma) 0x2000026 - ep_info2
[  223.701883] xhci_hcd 0000:03:00.0: @ffff880137b25048 (virt) @ffffc048 (dma) 0xffffe8e0 - deq
[  223.701885] xhci_hcd 0000:03:00.0: @ffff880137b25050 (virt) @ffffc050 (dma) 0x000000 - tx_info
[  223.701887] xhci_hcd 0000:03:00.0: @ffff880137b25054 (virt) @ffffc054 (dma) 0x000000 - rsvd[0]
[  223.701889] xhci_hcd 0000:03:00.0: @ffff880137b25058 (virt) @ffffc058 (dma) 0x000000 - rsvd[1]
[  223.701892] xhci_hcd 0000:03:00.0: @ffff880137b2505c (virt) @ffffc05c (dma) 0x000000 - rsvd[2]
...
[  223.701927] xhci_hcd 0000:03:00.0: // Ding dong!
[  223.701992] xhci_hcd 0000:03:00.0: Setup ERROR: address device command for slot 1.

The xHCI spec says that both flags must be set to one for the Address
Device command.  When the device is first enumerated,
xhci_setup_addressable_virt_dev() does set those flags.  However, when
the device is addressed after it has been reset in the configured state,
xhci_setup_addressable_virt_dev() is not called, and
xhci_copy_ep0_dequeue_into_input_ctx() is called instead.  That function
relies on the flags being set up by previous commands, which apparently
isn't a good assumption.

Move the setting of the flags into the common parent function.

This should be queued for stable kernels as old as 2.6.35, since that
was the first introduction of xhci_copy_ep0_dequeue_into_input_ctx.

Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Tested-by: Matt <mdm@iinet.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrivers/base/node.c: fix compilation error with older versions of gcc
Claudio Scordino [Thu, 17 Nov 2011 10:08:32 +0000]
drivers/base/node.c: fix compilation error with older versions of gcc

commit 91a13c281d7d4648c0b32dede11a0144c4e7984c upstream.

Patch to fix the error message "directives may not be used inside a macro
argument" which appears when the kernel is compiled for the cris architecture.

Signed-off-by: Claudio Scordino <claudio@evidence.eu.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopcie-gadget-spear: Add "platform:" prefix for platform modalias
Axel Lin [Mon, 31 Oct 2011 02:20:28 +0000]
pcie-gadget-spear: Add "platform:" prefix for platform modalias

commit 161f14191dc166c4e3f37f68af1bc199c6868b7d upstream.

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - fix ELD memory leak
Wu Fengguang [Tue, 22 Nov 2011 08:58:35 +0000]
ALSA: hda - fix ELD memory leak

Backported from commit b95d68b8179764e29558b75cec35ef4a6a98925b.

memset(eld) clears eld->proc_entry which will leak the struct
snd_info_entry when unloading module.

Fix it by
- memset only the fields before eld->eld_buffer
- set eld->eld_valid to true _after_ all eld fields have been filled

Cc: Pierre-louis Bossart <pierre-louis.bossart@intel.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonfs: when attempting to open a directory, fall back on normal lookup (try #5)
Jeff Layton [Fri, 4 Nov 2011 17:31:21 +0000]
nfs: when attempting to open a directory, fall back on normal lookup (try #5)

commit 1788ea6e3b2a58cf4fb00206e362d9caff8d86a7 upstream.

commit d953126 changed how nfs_atomic_lookup handles an -EISDIR return
from an OPEN call. Prior to that patch, that caused the client to fall
back to doing a normal lookup. When that patch went in, the code began
returning that error to userspace. The d_revalidate codepath however
never had the corresponding change, so it was still possible to end up
with a NULL ctx->state pointer after that.

That patch caused a regression. When we attempt to open a directory that
does not have a cached dentry, that open now errors out with EISDIR. If
you attempt the same open with a cached dentry, it will succeed.

Fix this by reverting the change in nfs_atomic_lookup and allowing
attempts to open directories to fall back to a normal lookup

Also, add a NFSv4-specific f_ops->open routine that just returns
-ENOTDIR. This should never be called if things are working properly,
but if it ever is, then the dprintk may help in debugging.

To facilitate this, a new file_operations field is also added to the
nfs_rpc_ops struct.

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoTTY: ldisc, wait for ldisc infinitely in hangup
Jiri Slaby [Wed, 16 Nov 2011 15:27:09 +0000]
TTY: ldisc, wait for ldisc infinitely in hangup

commit 0c73c08ec73dbe080b9ec56696ee21d32754d918 upstream.

For /dev/console case, we do not kill all ldisc users. It's due to
redirected_tty_write test in __tty_hangup. In that case there still
might be a process waiting e.g. in n_tty_read for input.

We wait for such processes to disappear. The problem is that we use a
timeout. After this timeout, we continue closing the ldisc and start
freeing tty resources. It obviously leads to crashes when the other
process is woken.

So to fix this, we wait infinitely before reiniting the ldisc. (The
tiocsetd remains untouched -- times out after 5s.)

This is nicely reproducible with this run from shell:
  exec 0<>/dev/console 1<>/dev/console 2<>/dev/console
and stopping a getty like:
  systemctl stop serial-getty@ttyS0.service

The crash proper may be produced only under load or with constified
timing the same as for 92f6fa09b.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Dmitriy Matrosov <sgf.dma@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoTTY: ldisc, move wait idle to caller
Jiri Slaby [Wed, 16 Nov 2011 15:27:08 +0000]
TTY: ldisc, move wait idle to caller

commit 300420722e0734a4254f3b634e0f82664495d210 upstream.

It is the only place where reinit is called from. And we really need
to wait for the old ldisc to go once. Actually this is the place where
the waiting originally was (before removed and re-added later).

This will make the fix in the following patch easier to implement.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Dmitriy Matrosov <sgf.dma@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoTTY: ldisc, allow waiting for ldisc arbitrarily long
Jiri Slaby [Wed, 16 Nov 2011 15:27:07 +0000]
TTY: ldisc, allow waiting for ldisc arbitrarily long

commit df92d0561de364de53c42abc5d43e04ab6f326a5 upstream.

To fix a nasty bug in ldisc hup vs. reinit we need to wait infinitely
long for ldisc to be gone. So here we add a parameter to
tty_ldisc_wait_idle to allow that.

This is only a preparation for the real fix which is done in the
following patches.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Dave Young <hidave.darkstar@gmail.com>
Cc: Dave Jones <davej@redhat.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Dmitriy Matrosov <sgf.dma@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agotty: hvc_dcc: Fix duplicate character inputs
Stephen Boyd [Wed, 26 Oct 2011 02:19:43 +0000]
tty: hvc_dcc: Fix duplicate character inputs

commit c2a3e84f950e7ddba1f3914b005861d46ae60359 upstream.

Reading from the DCC grabs a character from the buffer and
clears the status bit. Since this is a context-changing
operation, instructions following the character read that rely on
the status bit being accurate need to be synchronized with an
ISB.

In this case, the status bit check needs to execute after the
character read otherwise we run the risk of reading the character
and checking the status bit before the read can clear the status
bit in the first place. When this happens, the user will see the
same character they typed twice, instead of once.

Add an ISB after the read and the write, so that the status check
is synchronized with the read/write operations.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopch_uart: Support new device LAPIS Semiconductor ML7831 IOH
Tomoya MORINAGA [Fri, 28 Oct 2011 00:38:49 +0000]
pch_uart: Support new device LAPIS Semiconductor ML7831 IOH

commit 8249f743f732ccbc3056428945ab1d9bd36d46bf upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopch_uart: Fix DMA resource leak issue
Tomoya MORINAGA [Fri, 11 Nov 2011 01:55:27 +0000]
pch_uart: Fix DMA resource leak issue

commit 90f04c2926cfb5bf74533b0a7766bc896f6a0c0e upstream.

Changing UART mode PIO->DMA->PIO->DMA like below, pch_uart driver can't get
DMA channel resource.

setserial /dev/ttyPCH0 ^low_latency
setserial /dev/ttyPCH0 low_latency

CAUSE:
Changing mode using setserial command, ".startup" function which gets DMA
channel is called before ".verify_port" function which sets
dma-flag(use_dma/use_dma_flag) as 1.

PIO->DMA
  .startup: Since dma-flag is 0, DMA channel is not requested.
  .verify_port: dma-flag is set as 1.
  .shutdown: N/A

DMA->PIO
  .startup: Since dma-flag is 1, DMA channel is requested.
  .verify_port: dma-flag is set as 0.
  .shutdown: Since dma-flag is 0, DMA channel is not released.

This means DMA channel resource leak occurs.
Next time, this driver can't get DMA channel resource forever.

MODIFICATION:
  Currently, when release DMA channel resource, this driver checks dma-flag.
  However, this specification occurs the above issue.
  This driver must check whether dma_request_channel is executed or not.
  The values are saved in private data variable "chan_tx/chan_tx".
  These variables mean if the value is NULL, DMA channel is not requested,
  if not NULL, DMA channel is requested.

This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopch_uart: Fix hw-flow control issue
Tomoya MORINAGA [Thu, 27 Oct 2011 06:45:18 +0000]
pch_uart: Fix hw-flow control issue

commit a1d7cfe29f13cf45f8094929864b9c66bf0cd91b upstream.

Using hardware flow control,
currently, register of the control-bit(AFE) is not set.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopch_phub: Fix MAC address writing issue for LAPIS ML7831
Tomoya MORINAGA [Fri, 11 Nov 2011 01:12:18 +0000]
pch_phub: Fix MAC address writing issue for LAPIS ML7831

commit 2a9887919457c6e1bd482e8448223be59d19010a upstream.

ISSUE:
Using ML7831, MAC address writing doesn't work well.

CAUSE:
ML7831 and EG20T have the same register map for MAC address access.
However, this driver processes the writing the same as ML7223.
This is not true.
This driver must process the writing the same as EG20T.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya.rohm@gmail.com>
Cc: Masayuki Ohtak <masa-korg@dsn.okisemi.com>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
Cc: Denis Turischev <denis@compulab.co.il>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopch_phub: Support new device LAPIS Semiconductor ML7831 IOH
Tomoya MORINAGA [Fri, 28 Oct 2011 00:33:13 +0000]
pch_phub: Support new device LAPIS Semiconductor ML7831 IOH

commit 584ad00ce4bfe594e4c4a89944b3c635187a1ca1 upstream.

ML7831 is companion chip for Intel Atom E6xx series.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.lapis-semi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoPM / driver core: disable device's runtime PM during shutdown
Peter Chen [Tue, 15 Nov 2011 20:52:29 +0000]
PM / driver core: disable device's runtime PM during shutdown

commit af8db1508f2c9f3b6e633e2d2d906c6557c617f9 upstream.

There may be an issue when the user issue "reboot/shutdown" command, then
the device has shut down its hardware, after that, this runtime-pm featured
device's driver will probably be scheduled to do its suspend routine,
and at its suspend routine, it may access hardware, but the device has
already shutdown physically, then the system hang may be occurred.

I ran out this issue using an auto-suspend supported USB devices, like
3G modem, keyboard. The usb runtime suspend routine may be scheduled
after the usb controller has been shut down, and the usb runtime suspend
routine will try to suspend its roothub(controller), it will access
register, then the system hang occurs as the controller is shutdown.

Signed-off-by: Peter Chen <peter.chen@freescale.com>
Acked-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoip6_tunnel: copy parms.name after register_netdevice
Josh Boyer [Thu, 10 Nov 2011 15:10:23 +0000]
ip6_tunnel: copy parms.name after register_netdevice

commit 731abb9cb27aef6013ce60808a04e04a545f3f4e upstream.

Commit 1c5cae815d removed an explicit call to dev_alloc_name in ip6_tnl_create
because register_netdevice will now create a valid name.  This works for the
net_device itself.

However the tunnel keeps a copy of the name in the parms structure for the
ip6_tnl associated with the tunnel.  parms.name is set by copying the net_device
name in ip6_tnl_dev_init_gen.  That function is called from ip6_tnl_dev_init in
ip6_tnl_create, but it is done before register_netdevice is called so the name
is set to a bogus value in the parms.name structure.

This shows up if you do a simple tunnel add, followed by a tunnel show:

[root@localhost ~]# ip -6 tunnel add remote fec0::100 local fec0::200
[root@localhost ~]# ip -6 tunnel show
ip6tnl0: ipv6/ipv6 remote :: local :: encaplimit 0 hoplimit 0 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000)
ip6tnl%d: ipv6/ipv6 remote fec0::100 local fec0::200 encaplimit 4 hoplimit 64 tclass 0x00 flowlabel 0x00000 (flowinfo 0x00000000)
[root@localhost ~]#

Fix this by moving the strcpy out of ip6_tnl_dev_init_gen, and calling it after
register_netdevice has successfully returned.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agocfg80211: fix bug on regulatory core exit on access to last_request
Luis R. Rodriguez [Tue, 8 Nov 2011 22:28:06 +0000]
cfg80211: fix bug on regulatory core exit on access to last_request

commit 58ebacc66bd11be2327edcefc79de94bd6f5bb4a upstream.

Commit 4d9d88d1 by Scott James Remnant <keybuk@google.com> added
the .uevent() callback for the regulatory device used during
the platform device registration. The change was done to account
for queuing up udev change requests through udevadm triggers.
The change also meant that upon regulatory core exit we will now
send a uevent() but the uevent() callback, reg_device_uevent(),
also accessed last_request. Right before commiting device suicide
we free'd last_request but never set it to NULL so
platform_device_unregister() would lead to bogus kernel paging
request. Fix this and also simply supress uevents right before
we commit suicide as they are pointless.

This fix is required for kernels >= v2.6.39

$ git describe --contains 4d9d88d1
v2.6.39-rc1~468^2~25^2^2~21

The impact of not having this present is that a bogus paging
access may occur (only read) upon cfg80211 unload time. You
may also get this BUG complaint below. Although Johannes
could not reproduce the issue this fix is theoretically correct.

mac80211_hwsim: unregister radios
mac80211_hwsim: closing netlink
BUG: unable to handle kernel paging request at ffff88001a06b5ab
IP: [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
PGD 1836063 PUD 183a063 PMD 1ffcb067 PTE 1a06b160
Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
CPU 0
Modules linked in: cfg80211(-) [last unloaded: mac80211]

Pid: 2279, comm: rmmod Tainted: G        W   3.1.0-wl+ #663 Bochs Bochs
RIP: 0010:[<ffffffffa030df9a>]  [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
RSP: 0000:ffff88001c5f9d58  EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff88001d2eda88 RCX: ffff88001c7468fc
RDX: ffff88001a06b5a0 RSI: ffff88001c7467b0 RDI: ffff88001c7467b0
RBP: ffff88001c5f9d58 R08: 000000000000ffff R09: 000000000000ffff
R10: 0000000000000000 R11: 0000000000000001 R12: ffff88001c7467b0
R13: ffff88001d2eda78 R14: ffffffff8164a840 R15: 0000000000000001
FS:  00007f8a91d8a6e0(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffff88001a06b5ab CR3: 000000001c62e000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process rmmod (pid: 2279, threadinfo ffff88001c5f8000, task ffff88000023c780)
Stack:
 ffff88001c5f9d98 ffffffff812ff7e5 ffffffff8176ab3d ffff88001c7468c2
 000000000000ffff ffff88001d2eda88 ffff88001c7467b0 ffff880000114820
 ffff88001c5f9e38 ffffffff81241dc7 ffff88001c5f9db8 ffffffff81040189
Call Trace:
 [<ffffffff812ff7e5>] dev_uevent+0xc5/0x170
 [<ffffffff81241dc7>] kobject_uevent_env+0x1f7/0x490
 [<ffffffff81040189>] ? sub_preempt_count+0x29/0x60
 [<ffffffff814cab1a>] ? _raw_spin_unlock_irqrestore+0x4a/0x90
 [<ffffffff81305307>] ? devres_release_all+0x27/0x60
 [<ffffffff8124206b>] kobject_uevent+0xb/0x10
 [<ffffffff812fee27>] device_del+0x157/0x1b0
 [<ffffffff8130377d>] platform_device_del+0x1d/0x90
 [<ffffffff81303b76>] platform_device_unregister+0x16/0x30
 [<ffffffffa030fffd>] regulatory_exit+0x5d/0x180 [cfg80211]
 [<ffffffffa032bec3>] cfg80211_exit+0x2b/0x45 [cfg80211]
 [<ffffffff8109a84c>] sys_delete_module+0x16c/0x220
 [<ffffffff8108a23e>] ? trace_hardirqs_on_caller+0x7e/0x120
 [<ffffffff814cba02>] system_call_fastpath+0x16/0x1b
Code: <all your base are belong to me>
RIP  [<ffffffffa030df9a>] reg_device_uevent+0x1a/0x50 [cfg80211]
 RSP <ffff88001c5f9d58>
CR2: ffff88001a06b5ab
---[ end trace 147c5099a411e8c0 ]---

Reported-by: Johannes Berg <johannes@sipsolutions.net>
Cc: Scott James Remnant <keybuk@google.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agonl80211: fix HT capability attribute validation
Johannes Berg [Thu, 3 Nov 2011 08:27:01 +0000]
nl80211: fix HT capability attribute validation

commit 6c7394197af90f6a332180e33f5d025d3037d883 upstream.

Since the NL80211_ATTR_HT_CAPABILITY attribute is
used as a struct, it needs a minimum, not maximum
length. Enforce that properly. Not doing so could
potentially lead to reading after the buffer.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomac80211: fix bug in ieee80211_build_probe_req
Johannes Berg [Tue, 8 Nov 2011 12:04:41 +0000]
mac80211: fix bug in ieee80211_build_probe_req

commit 5b2bbf75a24d6b06afff6de0eb4819413fd81971 upstream.

ieee80211_probereq_get() can return NULL in
which case we should clean up & return NULL
in ieee80211_build_probe_req() as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomac80211: fix NULL dereference in radiotap code
Johannes Berg [Tue, 8 Nov 2011 11:28:33 +0000]
mac80211: fix NULL dereference in radiotap code

commit f8d1ccf15568268c76f913b45ecdd33134387f1a upstream.

When receiving failed PLCP frames is enabled, there
won't be a rate pointer when we add the radiotap
header and thus the kernel will crash. Fix this by
not assuming the rate pointer is always valid. It's
still always valid for frames that have good PLCP
though, and that is checked & enforced.

This was broken by my
commit fc88518916793af8ad6a02e05ff254d95c36d875
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Fri Jul 30 13:23:12 2010 +0200

    mac80211: don't check rates on PLCP error frames

where I removed the check in this case but didn't
take into account that the rate info would be used.

Reported-by: Xiaokang Qin <xiaokang.qin@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agort2x00: Fix sleep-while-atomic bug in powersaving code.
Gertjan van Wingerde [Sat, 12 Nov 2011 18:10:44 +0000]
rt2x00: Fix sleep-while-atomic bug in powersaving code.

commit ed66ba472a742cd8df37d7072804b2111cdb1014 upstream.

The generic powersaving code that determines after reception of a frame
whether the device should go back to sleep or whether is could stay
awake was calling rt2x00lib_config directly from RX tasklet context.
On a number of the devices this call can actually sleep, due to having
to confirm that the sleeping commands have been executed successfully.

Fix this by moving the call to rt2x00lib_config to a workqueue call.

This fixes bug https://bugzilla.redhat.com/show_bug.cgi?id=731672

Tested-by: Tomas Trnka <tomastrnka@gmx.com>
Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoNet, libertas: Resolve memory leak in if_spi_host_to_card()
Jesper Juhl [Sun, 13 Nov 2011 21:14:32 +0000]
Net, libertas: Resolve memory leak in if_spi_host_to_card()

commit fe09b32a4361bea44169b2063e8c867cabb6a8ba upstream.

If we hit the default case in the switch in if_spi_host_to_card() we'll leak
the memory we allocated for 'packet'. This patch resolves the leak by freeing
the allocated memory in that case.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors
Catalin Marinas [Mon, 7 Nov 2011 17:05:53 +0000]
ARM: 7150/1: Allow kernel unaligned accesses on ARMv6+ processors

commit 8428e84d42179c2a00f5f6450866e70d802d1d05 upstream.

Recent gcc versions generate unaligned accesses by default on ARMv6 and
later processors. This patch ensures that the SCTLR.A bit is always
cleared on such processors to avoid kernel traping before
alignment_init() is called.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: John Linn <John.Linn@xilinx.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoKVM: s390: Fix RUNNING flag misinterpretation
Cornelia Huck [Thu, 17 Nov 2011 10:00:41 +0000]
KVM: s390: Fix RUNNING flag misinterpretation

commit 9e6dabeffd1d0ec2aa19aa076c4886067238d442 upstream.

CPUSTAT_RUNNING was implemented signifying that a vcpu is not stopped.
This is not, however, what the architecture says: RUNNING should be
set when the host is acting on the behalf of the guest operating
system.

CPUSTAT_RUNNING has been changed to be set in kvm_arch_vcpu_load()
and to be unset in kvm_arch_vcpu_put().

For signifying stopped state of a vcpu, a host-controlled bit has
been used and is set/unset basically on the reverse as the old
CPUSTAT_RUNNING bit (including pushing it down into stop handling
proper in handle_stop()).

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Carsten Otte <cotte@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agosaa7164: Add support for another HVR2200 hardware revision
Tony Jago [Fri, 12 Aug 2011 03:19:11 +0000]
saa7164: Add support for another HVR2200 hardware revision

commit 62dd28d0c659db29bdb89cfe9f0aefe42f0adfe9 upstream.

Hauppauge have released a new model rev, sub id 8940, this adds
support.

[stoth@kernellabs.com: I modified Tony's patch slightly in relation to the
 card numbering in saa7164.h, appending rather than inserting the new card
 - normal practise]
Signed-off-by: Tony Jago <tony@hammertelecom.com.au>
Signed-off-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoaacraid: controller hangs if kernel uses non-default ASPM policy
Vasily Averin [Fri, 11 Nov 2011 09:42:16 +0000]
aacraid: controller hangs if kernel uses non-default ASPM policy

commit cf16123c9c8e346ed1dd171295a678d77648d7f8 upstream.

Aacraid controller can hang on some nodes if kernel uses non-default
(powersave) ASPM policy.  Controller hangs shortly after successful load and
hardware detection. Scsi error handler detects this hang and tries to restart
hardware but it does not help.

Initially it was noticed on RHEL6-based openVZ kernel after backporting
aacraid driver from mainline (RHEL6 kernel with original driver works well)
http://bugzilla.openvz.org/show_bug.cgi?id=2043

This issue happens because default ASPM policy was changed in Red Hat
kernels. Therefore guys from Red Hat have noticed this problem long time ago:
on Fedora 12
 https://bugzilla.redhat.com/show_bug.cgi?id=540478
on Fedora 14
 https://bugzilla.redhat.com/show_bug.cgi?id=679385

In RHEL6 kernel this issue was fixed, ASPM was disabled in aacraid driver. In
kernel changelog I've found that seems it was done by Matthew Garrett: -
[scsi] aacraid: Disable ASPM by default (Matthew Garrett) [599735]

However seems this patch was not submitted to mainline. I've reproduced this
issue on vanilla 3.1.0 kernel booted with "pcie_aspm.policy=powersave" option,
So I believe it makes sense to do it now.

Signed-off-by: Vasily Averin <vvs@sw.ru>
[mjg: Checking the Windows drivers indicates that they disable ASPM under all
circumstances, so:]
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Achim Leubner <Achim_Leubner@pmc-sierra.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agohpsa: Disable ASPM
Matthew Garrett [Fri, 11 Nov 2011 16:14:23 +0000]
hpsa: Disable ASPM

commit e5a44df85e8d78e5c2d3d2e4f59b460905691e2f upstream.

The Windows driver .inf disables ASPM on hpsa devices. Do the same because the
selection of a non default ASPM policy can cause the device to hang.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Mike Miller <mike.miller@hp.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agofix WARNING: at drivers/scsi/scsi_lib.c:1704
James Bottomley [Mon, 7 Nov 2011 14:51:24 +0000]
fix WARNING: at drivers/scsi/scsi_lib.c:1704

commit 4e6c82b3614a18740ef63109d58743a359266daf upstream.

On Mon, 2011-11-07 at 17:24 +1100, Stephen Rothwell wrote:
> Hi all,
>
> Starting some time last week I am getting the following during boot on
> our PPC970 blade:
>
> calling  .ipr_init+0x0/0x68 @ 1
> ipr: IBM Power RAID SCSI Device Driver version: 2.5.2 (April 27, 2011)
> ipr 0000:01:01.0: Found IOA with IRQ: 26
> ipr 0000:01:01.0: Starting IOA initialization sequence.
> ipr 0000:01:01.0: Adapter firmware version: 06160039
> ipr 0000:01:01.0: IOA initialized.
> scsi0 : IBM 572E Storage Adapter
> ------------[ cut here ]------------
> WARNING: at drivers/scsi/scsi_lib.c:1704
> Modules linked in:
> NIP: c00000000053b3d4 LR: c00000000053e5b0 CTR: c000000000541d70
> REGS: c0000000783c2f60 TRAP: 0700   Not tainted  (3.1.0-autokern1)
> MSR: 8000000000029032 <EE,ME,CE,IR,DR>  CR: 24002024  XER: 20000002
> TASK = c0000000783b8000[1] 'swapper' THREAD: c0000000783c0000 CPU: 0
> GPR00: 0000000000000001 c0000000783c31e0 c000000000cf38b0 c00000000239a9d0
> GPR04: c000000000cbe8f8 0000000000000000 c0000000783c3040 0000000000000000
> GPR08: c000000075daf488 c000000078a3b7ff c000000000bcacc8 0000000000000000
> GPR12: 0000000044002028 c000000007ffb000 0000000002e40000 000000000099b800
> GPR16: 0000000000000000 c000000000bba5fc c000000000a61db8 0000000000000000
> GPR20: 0000000001b77200 0000000000000000 c000000078990000 0000000000000001
> GPR24: c000000002396828 0000000000000000 0000000000000000 c000000078a3b938
> GPR28: fffffffffffffffa c0000000008ad2c0 c000000000c7faa8 c00000000239a9d0
> NIP [c00000000053b3d4] .scsi_free_queue+0x24/0x90
> LR [c00000000053e5b0] .scsi_alloc_sdev+0x280/0x2e0
> Call Trace:
> [c0000000783c31e0] [c000000000c7faa8] wireless_seq_fops+0x278d0/0x2eb88 (unreliable)
> [c0000000783c3270] [c00000000053e5b0] .scsi_alloc_sdev+0x280/0x2e0
> [c0000000783c3330] [c00000000053eba0] .scsi_probe_and_add_lun+0x390/0xb40
> [c0000000783c34a0] [c00000000053f7ec] .__scsi_scan_target+0x16c/0x650
> [c0000000783c35f0] [c00000000053fd90] .scsi_scan_channel+0xc0/0x100
> [c0000000783c36a0] [c00000000053fefc] .scsi_scan_host_selected+0x12c/0x1c0
> [c0000000783c3750] [c00000000083dcb4] .ipr_probe+0x2c0/0x390
> [c0000000783c3830] [c0000000003f50b4] .local_pci_probe+0x34/0x50
> [c0000000783c38a0] [c0000000003f5f78] .pci_device_probe+0x148/0x150
> [c0000000783c3950] [c0000000004e1e8c] .driver_probe_device+0xdc/0x210
> [c0000000783c39f0] [c0000000004e20cc] .__driver_attach+0x10c/0x110
> [c0000000783c3a80] [c0000000004e1228] .bus_for_each_dev+0x98/0xf0
> [c0000000783c3b30] [c0000000004e1bf8] .driver_attach+0x28/0x40
> [c0000000783c3bb0] [c0000000004e07d8] .bus_add_driver+0x218/0x340
> [c0000000783c3c60] [c0000000004e2a2c] .driver_register+0x9c/0x1b0
> [c0000000783c3d00] [c0000000003f62d4] .__pci_register_driver+0x64/0x140
> [c0000000783c3da0] [c000000000b99f88] .ipr_init+0x4c/0x68
> [c0000000783c3e20] [c00000000000ad24] .do_one_initcall+0x1a4/0x1e0
> [c0000000783c3ee0] [c000000000b512d0] .kernel_init+0x14c/0x1fc
> [c0000000783c3f90] [c000000000022468] .kernel_thread+0x54/0x70
> Instruction dump:
ebe1fff8 7c0803a6 4e800020 7c0802a6 fba1ffe8 fbe1fff8 7c7f1b78 f8010010
f821ff71 e8030398 3120ffff 7c090110 <0b000000> e86303b0 482de065 60000000
> ---[ end trace 759bed76a85e8dec ]---
> scsi 0:0:1:0: Direct-Access     IBM-ESXS MAY2036RC        T106 PQ: 0 ANSI: 5
> ------------[ cut here ]------------
>
> I get lots more of these.  The obvious commit to point the finger at
> is 3308511c93e6 ("[SCSI] Make scsi_free_queue() kill pending SCSI
> commands") but the root cause may be something different.

Caused by

commit f7c9c6bb14f3104608a3a83cadea10a6943d2804
Author: Anton Blanchard <anton@samba.org>
Date:   Thu Nov 3 08:56:22 2011 +1100

    [SCSI] Fix block queue and elevator memory leak in scsi_alloc_sdev

Doesn't completely do the teardown.  The true fix is to do a proper
teardown instead of hand rolling it

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Fix the connection selection of ADCs on Cirrus codecs
Takashi Iwai [Wed, 16 Nov 2011 17:05:11 +0000]
ALSA: hda - Fix the connection selection of ADCs on Cirrus codecs

commit 05ee7964a470d29889ac48cc8274c1b5a1904a11 upstream.

spec->cur_adc isn't set until cs_capture_pcm_prepare() is called although
the driver tries to select the connection at init time and at auto-mic
switch.  This results in the access to the widget NID 0, which is
obviously invalid, also a wrong capture source.

This patch fixes the issue by issuing the connect-select verb conditionally
at appropriate places.

Reported-and-tested-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agogenirq: Fix irqfixup, irqpoll regression
Edward Donovan [Tue, 1 Nov 2011 19:29:44 +0000]
genirq: Fix irqfixup, irqpoll regression

commit c75d720fca8a91ce99196d33adea383621027bf2 upstream.

commit d05c65fff0 ("genirq: spurious: Run only one poller at a time")
introduced a regression, leaving the boot options 'irqfixup' and
'irqpoll' non-functional. The patch placed tests in each function, to
exit if the function is already running. The test in 'misrouted_irq'
exited when it should have proceeded, effectively disabling
'misrouted_irq' and 'poll_spurious_irqs'.

The check for an already running poller needs to be "!= 1" not "== 1"
as "1" is the value when the first poller starts running.

Signed-off-by: Edward Donovan <edward.donovan@numble.net>
Cc: maciej.rutecki@gmail.com
Link: http://lkml.kernel.org/r/1320175784-6745-1-git-send-email-edward.donovan@numble.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoLinux 3.1.2
Greg Kroah-Hartman [Mon, 21 Nov 2011 22:47:46 +0000]
Linux 3.1.2

7 years agoblock: Always check length of all iov entries in blk_rq_map_user_iov()
Ben Hutchings [Sun, 13 Nov 2011 18:58:09 +0000]
block: Always check length of all iov entries in blk_rq_map_user_iov()

commit 6b76106d8ef31111d6fc469564b83b5f5542794f upstream.

Even after commit 5478755616ae2ef1ce144dded589b62b2a50d575
("block: check for proper length of iov entries earlier ...")
we still won't check for zero-length entries after an unaligned
entry.  Remove the break-statement, so all entries are checked.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agobacking-dev: ensure wakeup_timer is deleted
Rabin Vincent [Fri, 11 Nov 2011 12:29:04 +0000]
backing-dev: ensure wakeup_timer is deleted

commit 7a401a972df8e184b3d1a3fc958c0a4ddee8d312 upstream.

bdi_prune_sb() in bdi_unregister() attempts to removes the bdi links
from all super_blocks and then del_timer_sync() the writeback timer.

However, this can race with __mark_inode_dirty(), leading to
bdi_wakeup_thread_delayed() rearming the writeback timer on the bdi
we're unregistering, after we've called del_timer_sync().

This can end up with the bdi being freed with an active timer inside it,
as in the case of the following dump after the removal of an SD card.

Fix this by redoing the del_timer_sync() in bdi_destory().

 ------------[ cut here ]------------
 WARNING: at /home/rabin/kernel/arm/lib/debugobjects.c:262 debug_print_object+0x9c/0xc8()
 ODEBUG: free active (active state 0) object type: timer_list hint: wakeup_timer_fn+0x0/0x180
 Modules linked in:
 Backtrace:
 [<c00109dc>] (dump_backtrace+0x0/0x110) from [<c0236e4c>] (dump_stack+0x18/0x1c)
  r6:c02bc638 r5:00000106 r4:c79f5d18 r3:00000000
 [<c0236e34>] (dump_stack+0x0/0x1c) from [<c0025e6c>] (warn_slowpath_common+0x54/0x6c)
 [<c0025e18>] (warn_slowpath_common+0x0/0x6c) from [<c0025f28>] (warn_slowpath_fmt+0x38/0x40)
  r8:20000013 r7:c780c6f0 r6:c031613c r5:c780c6f0 r4:c02b1b29
 r3:00000009
 [<c0025ef0>] (warn_slowpath_fmt+0x0/0x40) from [<c015eb4c>] (debug_print_object+0x9c/0xc8)
  r3:c02b1b29 r2:c02bc662
 [<c015eab0>] (debug_print_object+0x0/0xc8) from [<c015f574>] (debug_check_no_obj_freed+0xac/0x1dc)
  r6:c7964000 r5:00000001 r4:c7964000
 [<c015f4c8>] (debug_check_no_obj_freed+0x0/0x1dc) from [<c00a9e38>] (kmem_cache_free+0x88/0x1f8)
 [<c00a9db0>] (kmem_cache_free+0x0/0x1f8) from [<c014286c>] (blk_release_queue+0x70/0x78)
 [<c01427fc>] (blk_release_queue+0x0/0x78) from [<c015290c>] (kobject_release+0x70/0x84)
  r5:c79641f0 r4:c796420c
 [<c015289c>] (kobject_release+0x0/0x84) from [<c0153ce4>] (kref_put+0x68/0x80)
  r7:00000083 r6:c74083d0 r5:c015289c r4:c796420c
 [<c0153c7c>] (kref_put+0x0/0x80) from [<c01527d0>] (kobject_put+0x48/0x5c)
  r5:c79643b4 r4:c79641f0
 [<c0152788>] (kobject_put+0x0/0x5c) from [<c013ddd8>] (blk_cleanup_queue+0x68/0x74)
  r4:c7964000
 [<c013dd70>] (blk_cleanup_queue+0x0/0x74) from [<c01a6370>] (mmc_blk_put+0x78/0xe8)
  r5:00000000 r4:c794c400
 [<c01a62f8>] (mmc_blk_put+0x0/0xe8) from [<c01a64b4>] (mmc_blk_release+0x24/0x38)
  r5:c794c400 r4:c0322824
 [<c01a6490>] (mmc_blk_release+0x0/0x38) from [<c00de11c>] (__blkdev_put+0xe8/0x170)
  r5:c78d5e00 r4:c74083c0
 [<c00de034>] (__blkdev_put+0x0/0x170) from [<c00de2c0>] (blkdev_put+0x11c/0x12c)
  r8:c79f5f70 r7:00000001 r6:c74083d0 r5:00000083 r4:c74083c0
 r3:00000000
 [<c00de1a4>] (blkdev_put+0x0/0x12c) from [<c00b0724>] (kill_block_super+0x60/0x6c)
  r7:c7942300 r6:c79f4000 r5:00000083 r4:c74083c0
 [<c00b06c4>] (kill_block_super+0x0/0x6c) from [<c00b0a94>] (deactivate_locked_super+0x44/0x70)
  r6:c79f4000 r5:c031af64 r4:c794dc00 r3:c00b06c4
 [<c00b0a50>] (deactivate_locked_super+0x0/0x70) from [<c00b1358>] (deactivate_super+0x6c/0x70)
  r5:c794dc00 r4:c794dc00
 [<c00b12ec>] (deactivate_super+0x0/0x70) from [<c00c88b0>] (mntput_no_expire+0x188/0x194)
  r5:c794dc00 r4:c7942300
 [<c00c8728>] (mntput_no_expire+0x0/0x194) from [<c00c95e0>] (sys_umount+0x2e4/0x310)
  r6:c7942300 r5:00000000 r4:00000000 r3:00000000
 [<c00c92fc>] (sys_umount+0x0/0x310) from [<c000d940>] (ret_fast_syscall+0x0/0x30)
 ---[ end trace e5c83c92ada51c76 ]---

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: Copy down exception vectors after feature fixups
Anton Blanchard [Mon, 14 Nov 2011 12:54:47 +0000]
powerpc: Copy down exception vectors after feature fixups

commit d715e433b7ad19c02fc4becf0d5e9a59f97925de upstream.

kdump fails because we try to execute an HV only instruction. Feature
fixups are being applied after we copy the exception vectors down to 0
so they miss out on any updates.

We have always had this issue but it only became critical in v3.0
when we added CFAR support (breaks POWER5) and v3.1 when we added
POWERNV (breaks everyone).

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc: Add hvcall.h include to book3s_hv.c
Michael Neuling [Wed, 9 Nov 2011 20:39:49 +0000]
powerpc: Add hvcall.h include to book3s_hv.c

commit de1d9248eadd27539eba449b4d09428252e80c04 upstream.

If you build with KVM and UP it fails with the following due to a
missing include.

/arch/powerpc/kvm/book3s_hv.c: In function 'do_h_register_vpa':
arch/powerpc/kvm/book3s_hv.c:156:10: error: 'H_PARAMETER' undeclared (first use in this function)
arch/powerpc/kvm/book3s_hv.c:156:10: note: each undeclared identifier is reported only once for each function it appears in
arch/powerpc/kvm/book3s_hv.c:192:12: error: 'H_RESOURCE' undeclared (first use in this function)
arch/powerpc/kvm/book3s_hv.c:222:9: error: 'H_SUCCESS' undeclared (first use in this function)
arch/powerpc/kvm/book3s_hv.c: In function 'kvmppc_pseries_do_hcall':
arch/powerpc/kvm/book3s_hv.c:228:30: error: 'H_SUCCESS' undeclared (first use in this function)
arch/powerpc/kvm/book3s_hv.c:232:7: error: 'H_CEDE' undeclared (first use in this function)
arch/powerpc/kvm/book3s_hv.c:234:7: error: 'H_PROD' undeclared (first use in this function)
arch/powerpc/kvm/book3s_hv.c:238:10: error: 'H_PARAMETER' undeclared (first use in this function)
arch/powerpc/kvm/book3s_hv.c:250:7: error: 'H_CONFER' undeclared (first use in this function)
arch/powerpc/kvm/book3s_hv.c:252:7: error: 'H_REGISTER_VPA' undeclared (first use in this function)
make[2]: *** [arch/powerpc/kvm/book3s_hv.o] Error 1

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agopowerpc/ps3: Fix lost SMP IPIs
Geoff Levand [Tue, 8 Nov 2011 12:37:26 +0000]
powerpc/ps3: Fix lost SMP IPIs

commit 72f3bea075287785ed32b777b6dd2636aa7002e8 upstream.

Fixes the PS3 bootup hang introduced in 3.0-rc1 by:

  commit 317f394160e9beb97d19a84c39b7e5eb3d7815a
  sched: Move the second half of ttwu() to the remote cpu

Move the PS3's LV1 EOI call lv1_end_of_interrupt_ext() from ps3_chip_eoi()
to ps3_get_irq() for IPI messages.

If lv1_send_event_locally() is called between a previous call to
lv1_send_event_locally() and the coresponding call to
lv1_end_of_interrupt_ext() the second event will not be delivered to the
target cpu.

The PS3's SMP IPIs are implemented using lv1_send_event_locally(), so if two
IPI messages of the same type are sent to the same target in a relatively
short period of time the second IPI event can become lost when
lv1_end_of_interrupt_ext() is called from ps3_chip_eoi().

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxen-gntalloc: signedness bug in add_grefs()
Dan Carpenter [Fri, 4 Nov 2011 18:24:36 +0000]
xen-gntalloc: signedness bug in add_grefs()

commit 99cb2ddcc617f43917e94a4147aa3ccdb2bcd77e upstream.

gref->gref_id is unsigned so the error handling didn't work.
gnttab_grant_foreign_access() returns an int type, so we can add a
cast here, and it doesn't cause any problems.
gnttab_grant_foreign_access() can return a variety of errors
including -ENOSPC, -ENOSYS and -ENOMEM.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxen-gntalloc: integer overflow in gntalloc_ioctl_alloc()
Dan Carpenter [Fri, 4 Nov 2011 18:24:08 +0000]
xen-gntalloc: integer overflow in gntalloc_ioctl_alloc()

commit 21643e69a4c06f7ef155fbc70e3fba13fba4a756 upstream.

On 32 bit systems a high value of op.count could lead to an integer
overflow in the kzalloc() and gref_ids would be smaller than
expected.  If the you triggered another integer overflow in
"if (gref_size + op.count > limit)" then you'd probably get memory
corruption inside add_grefs().

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoxen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs.
Zhenzhong Duan [Fri, 28 Oct 2011 05:28:59 +0000]
xen:pvhvm: enable PVHVM VCPU placement when using more than 32 CPUs.

commit 90d4f5534d14815bd94c10e8ceccc57287657ecc upstream.

PVHVM running with more than 32 vcpus and pv_irq/pv_time enabled
need VCPU placement to work, or else it will softlockup.

Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agomfd: Fix twl4030 dependencies for audio codec
Thomas Weber [Mon, 5 Sep 2011 09:26:33 +0000]
mfd: Fix twl4030 dependencies for audio codec

commit f09ee0451a44a4e913a7c3cec3805508f7de6c54 upstream.

The codec for Devkit8000 (TWL4030)  was not detected except
when build with CONFIG_SND_SOC_ALL_CODECS.

twl-core.c still uses the CONFIG_TWL4030_CODEC for
twl_has_codec().

In commit 57fe7251f5bfc4332f24479376de48a1e8ca6211
the CONFIG_TWL4030_CODEC was renamed
into CONFIG_MFD_TWL4030_AUDIO, thatswhy the codec
was not detected.

This patch renames the CONFIG_ TWL4030_CODEC into
CONFIG_MFD_TWL4030_AUDIO in twl-core.c.

Signed-off-by: Thomas Weber <weber@corscience.de>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Cc: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agob43: refuse to load unsupported firmware
Rafał Miłecki [Tue, 8 Nov 2011 16:15:03 +0000]
b43: refuse to load unsupported firmware

[This patch is supposed to be applied in 3.1 (and maybe older) branches only.]

New kernels support newer firmware that users may try to incorrectly use
with older kernels. Display error and explain the problem in such a case

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agostaging: brcm80211: fill in proper rx rate in mac80211 rx status
Arend van Spriel [Tue, 23 Aug 2011 12:14:00 +0000]
staging: brcm80211: fill in proper rx rate in mac80211 rx status

commit 5a84d6ad4c9306afb467a600a4c6d7b50da49440 upstream.

The brcmsmac driver supports different rates on 5GHz but this is not
taken into account when providing the rate index in the receive
status information passed to mac80211.

Reviewed-by: Roland Vossen <rvossen@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon: add some missing FireMV pci ids
Alex Deucher [Mon, 14 Nov 2011 14:33:56 +0000]
drm/radeon: add some missing FireMV pci ids

commit b872a37437e93df9d112ce674752b3b3a0a17020 upstream.

Noticed by Egbert.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Egbert Eich <eich@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoRevert "leds: save the delay values after a successful call to blink_set()"
Johan Hovold [Tue, 15 Nov 2011 22:35:52 +0000]
Revert "leds: save the delay values after a successful call to blink_set()"

commit cb871513f656bdfc48b185b55f37857b5c750c40 upstream.

Revert commit 6123b0e274503a0d3588e84fbe07c9aa01bfaf5d.

The problem this patch intends to solve has alreadqy been fixed by
commit 7a5caabd090b ("drivers/leds/ledtrig-timer.c: fix broken sysfs
delay handling").

Signed-off-by: Johan Hovold <jhovold@gmail.com>
Cc: Antonio Ospite <ospite@studenti.unina.it>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agohfs: add sanity check for file name length
Dan Carpenter [Mon, 14 Nov 2011 14:52:08 +0000]
hfs: add sanity check for file name length

commit bc5b8a9003132ae44559edd63a1623b7b99dfb68 upstream.

On a corrupted file system the ->len field could be wrong leading to
a buffer overflow.

Reported-and-acked-by: Clement LECIGNE <clement.lecigne@netasq.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoKEYS: Fix a NULL pointer deref in the user-defined key type
David Howells [Tue, 15 Nov 2011 22:09:45 +0000]
KEYS: Fix a NULL pointer deref in the user-defined key type

commit 9f35a33b8d06263a165efe3541d9aa0cdbd70b3b upstream.

Fix a NULL pointer deref in the user-defined key type whereby updating a
negative key into a fully instantiated key will cause an oops to occur
when the code attempts to free the non-existent old payload.

This results in an oops that looks something like the following:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
  IP: [<ffffffff81085fa1>] __call_rcu+0x11/0x13e
  PGD 3391d067 PUD 3894a067 PMD 0
  Oops: 0002 [#1] SMP
  CPU 1
  Pid: 4354, comm: keyctl Not tainted 3.1.0-fsdevel+ #1140                  /DG965RY
  RIP: 0010:[<ffffffff81085fa1>]  [<ffffffff81085fa1>] __call_rcu+0x11/0x13e
  RSP: 0018:ffff88003d591df8  EFLAGS: 00010246
  RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000006e
  RDX: ffffffff8161d0c0 RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ffff88003d591e18 R08: 0000000000000000 R09: ffffffff8152fa6c
  R10: 0000000000000000 R11: 0000000000000300 R12: ffff88003b8f9538
  R13: ffffffff8161d0c0 R14: ffff88003b8f9d50 R15: ffff88003c69f908
  FS:  00007f97eb18c720(0000) GS:ffff88003bd00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000008 CR3: 000000003d47a000 CR4: 00000000000006e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
  Process keyctl (pid: 4354, threadinfo ffff88003d590000, task ffff88003c78a040)
  Stack:
   ffff88003e0ffde0 ffff88003b8f9538 0000000000000001 ffff88003b8f9d50
   ffff88003d591e28 ffffffff810860f0 ffff88003d591e68 ffffffff8117bfea
   ffff88003d591e68 ffffffff00000000 ffff88003e0ffde1 ffff88003e0ffde0
  Call Trace:
   [<ffffffff810860f0>] call_rcu_sched+0x10/0x12
   [<ffffffff8117bfea>] user_update+0x8d/0xa2
   [<ffffffff8117723a>] key_create_or_update+0x236/0x270
   [<ffffffff811789b1>] sys_add_key+0x123/0x17e
   [<ffffffff813b84bb>] system_call_fastpath+0x16/0x1b

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Neil Horman <nhorman@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: usb-audio - Fix the missing volume quirks at delayed init
Takashi Iwai [Tue, 8 Nov 2011 16:50:27 +0000]
ALSA: usb-audio - Fix the missing volume quirks at delayed init

commit dcaaf9f2c16b56f8bb316881fcd3f15c18fc71e7 upstream.

In the recent usb-audio driver, the initialization of volume ranges
may be delayed when the device doesn't respond well at the probing time.
But the volume quirks for certain devices are applied only in
mixer_ctl_feature_info() thus only at the very first probe and will be
missing when the volume range is initialized later.

This patch moves the volume quirk code to be always called from the
volume-range extraction (get_min_max()), so that the quirks are properly
applied in the later init time.

Reported-and-tested-by: Alexey Fisher <bug-track@fisher-privat.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: usb-audio - Check the dB-range validity in the later read, too
Takashi Iwai [Fri, 19 Aug 2011 06:30:53 +0000]
ALSA: usb-audio - Check the dB-range validity in the later read, too

commit 9fcd0ab130579d9742538340edda3225f2b49a3e upstream.

When the initial check of dB-range failed due to the read error, try to
check again at the later read, too.  When an invalid dB range is found,
remove TLV flags and notify the mixer info change.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/radeon/kms: make an aux failure debug only
Alex Deucher [Tue, 8 Nov 2011 15:09:58 +0000]
drm/radeon/kms: make an aux failure debug only

commit 091264f0bc12419560ac64fcef4567809d611658 upstream.

Can happen when there is no DP panel attached, confusing
users.  Make it debug only.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/nouveau: initialize chan->fence.lock before use
Marcin Slusarz [Fri, 9 Sep 2011 12:16:42 +0000]
drm/nouveau: initialize chan->fence.lock before use

commit 5e60ee780e792efe6dce97eceb110b1d30bab850 upstream.

Fence lock needs to be initialized before any call to nouveau_channel_put
because it calls nouveau_channel_idle->nouveau_fence_update which uses
fence lock.

BUG: spinlock bad magic on CPU#0, test/24134
 lock: ffff88019f90dba8, .magic: 00000000, .owner: <none>/-1, .owner_cpu: 0
Pid: 24134, comm: test Not tainted 3.0.0-nv+ #800
Call Trace:
 spin_bug+0x9c/0xa3
 do_raw_spin_lock+0x29/0x13c
 _raw_spin_lock+0x1e/0x22
 nouveau_fence_update+0x2d/0xf1
 nouveau_channel_idle+0x22/0xa0
 nouveau_channel_put_unlocked+0x84/0x1bd
 nouveau_channel_put+0x20/0x24
 nouveau_channel_alloc+0x4ec/0x585
 nouveau_ioctl_fifo_alloc+0x50/0x130
 drm_ioctl+0x289/0x361
 do_vfs_ioctl+0x4dd/0x52c
 sys_ioctl+0x42/0x65
 system_call_fastpath+0x16/0x1b

It's easily triggerable from userspace.

Additionally remove double initialization of chan->fence.pending.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agodrm/i915: Fix object refcount leak on mmappable size limit error path.
Eric Anholt [Tue, 1 Nov 2011 06:16:21 +0000]
drm/i915: Fix object refcount leak on mmappable size limit error path.

commit 14660ccd599dc7bd6ecef17408bd76dc853f9b77 upstream.

I've been seeing memory leaks on my system in the form of large
(300-400MB) GEM objects created by now-dead processes laying around
clogging up memory.  I usually notice when it gets to about 1.2GB of
them.  Hopefully this clears up the issue, but I just found this bug
by inspection.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agosh: Fix cached/uncaced address calculation in 29bit mode
Nobuhiro Iwamatsu [Fri, 4 Nov 2011 13:13:50 +0000]
sh: Fix cached/uncaced address calculation in 29bit mode

commit dfd3b596fbbfa48b8e7966ef996d587157554b69 upstream.

In the case of 29bit mode, CAC/UNCAC_ADDR does not return a right address.
This revises this problem by using P1SEGADDR and P2SEGADDR in 29bit mode.

Reported-by: Yutaro Ebihara <ebiharaml@si-linux.co.jp>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoASoC: Don't use wm8994->control_data in wm8994_readable_register()
Mark Brown [Fri, 4 Nov 2011 15:52:31 +0000]
ASoC: Don't use wm8994->control_data in wm8994_readable_register()

commit 8eeea521d9d0fa6afd62df8c6e6566ee946117fa upstream.

The field is no longer initialised so this will crash if running on
wm8958.

Reported-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoARM: at91: Fix USBA gadget registration
Jochen Friedrich [Tue, 25 Oct 2011 18:51:06 +0000]
ARM: at91: Fix USBA gadget registration

commit dd0b3825495a2e7a8cd6cf0ec077618c008ac7c4 upstream.

Since 193ab2a6070039e7ee2b9b9bebea754a7c52fd1b, various AT91 boards don't
register USBA adapters anymore due to depending on a now non-existing
symbol. Fix the symbol name.

Signed-off-by: Jochen Friedrich <jochen@scram.de>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agovirtio-pci: fix use after free
Michael S. Tsirkin [Mon, 7 Nov 2011 16:37:05 +0000]
virtio-pci: fix use after free

commit 72103bd1285211440621f2c46f4fce377584de54 upstream.

Commit 31a3ddda166cda86d2b5111e09ba4bda5239fae6 introduced
a use after free in virtio-pci. The main issue is
that the release method signals removal of the virtio device,
while remove signals removal of the pci device.

For example, on driver removal or hot-unplug,
virtio_pci_release_dev is called before virtio_pci_remove.
We then might get a crash as virtio_pci_remove tries to use the
device freed by virtio_pci_release_dev.

We allocate/free all resources together with the
pci device, so we can leave the release method empty.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - Don't add elements of other codecs to vmaster slave
Takashi Iwai [Thu, 10 Nov 2011 11:28:38 +0000]
ALSA: hda - Don't add elements of other codecs to vmaster slave

commit aeb4b88ec0a948efce8e3a23a8f964d3560a7308 upstream.

When a virtual mater control is created, the driver looks for slave
elements from the assigned card instance.  But this may include the
elements of other codecs when multiple codecs are on the same HD-audio
bus.  This works at the first time, but it'll give Oops when it's once
freed and re-created via reconfig sysfs.

This patch changes the element-look-up strategy to limit only to the
mixer elements of the same codec.

Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoALSA: hda - fix internal mic on Dell Vostro 3500 laptop
Julian Wollrath [Wed, 9 Nov 2011 09:02:40 +0000]
ALSA: hda - fix internal mic on Dell Vostro 3500 laptop

commit f7f9bdfadfda07afb904a9767468e38c2d1a6033 upstream.

Fix the not working internal mic on Dell Vostro 3500 laptop by introducing the
new model dell-vostro-3500.

Signed-off-by: Julian Wollrath <jwollrath@web.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

7 years agoLinux 3.1.1
Greg Kroah-Hartman [Fri, 11 Nov 2011 20:19:27 +0000]
Linux 3.1.1