8 years agoRevert "kconfig: Temporarily disable dependency warnings"
Michal Marek [Tue, 12 Oct 2010 13:12:23 +0000]
Revert "kconfig: Temporarily disable dependency warnings"

This reverts commit 71ebc01, which was a 2.6.36-only stopgap solution.

Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agoMerge branch 'kbuild/rc-fixes' into kbuild/kconfig
Michal Marek [Tue, 12 Oct 2010 13:09:06 +0000]
Merge branch 'kbuild/rc-fixes' into kbuild/kconfig

We need to revert the temporary hack in 71ebc01, hence the merge.

8 years agokbuild: fix oldnoconfig to do the right thing
Kyle McMartin [Wed, 1 Sep 2010 15:21:30 +0000]
kbuild: fix oldnoconfig to do the right thing

Commit 861b4ea4 broke oldnoconfig when removed the oldnoconfig checks on
                       if (input_mode == nonint_oldconfig ||
                           input_mode == oldnoconfig) {
                               if (input_mode == nonint_oldconfig &&
                                   sym->name &&
                                    !sym_is_choice_value(sym)) {
to avoid oldnoconfig chugging through the else stanza.

Fix that to restore expected behaviour (which I've confirmed in the
Fedora kernel build that the configs end up looking the same.)

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: Temporarily disable dependency warnings
Michal Marek [Fri, 8 Oct 2010 14:40:27 +0000]
kconfig: Temporarily disable dependency warnings

After fixing a use-after-free bug in kconfig, a 'make defconfig' or
'make allmodconfig' fills the screen with warnings that were not
detected before. Given that we are close to the release now, disable the
warnings temporarily and deal with them after 2.6.36.

Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: Use PATH_MAX instead of 128 for path buffer sizes.
Will Newton [Wed, 22 Sep 2010 14:59:13 +0000]
kconfig: Use PATH_MAX instead of 128 for path buffer sizes.

This prevents the buffers being overflowed when using a config
file with a long name. PATH_MAX is used elsewhere in the same
file, so use it here as well.

Signed-off-by: Will Newton <will.newton@imgtec.com>
Acked-by: WANG Cong <xiyou.wangcong@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: delay symbol direct dependency initialization
Arnaud Lacombe [Sun, 26 Sep 2010 20:22:03 +0000]
kconfig: delay symbol direct dependency initialization

This fixes the use-after-free and associated crash in kconfig introduced
in commit 246cf9c26bf11f2bffbecea6e5bd222eee7b1df8.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: Fix realloc usage()
Michal Marek [Thu, 30 Sep 2010 20:21:12 +0000]
kconfig: Fix realloc usage()

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: Propagate const
Michal Marek [Thu, 30 Sep 2010 20:17:48 +0000]
kconfig: Propagate const

Commit 2e7a091 made struct file->name a const char*, but forgot to
constify all users of it.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: Don't go out from read config loop when you read new symbol
Naohiro Aota [Thu, 30 Sep 2010 19:23:17 +0000]
kconfig: Don't go out from read config loop when you read new symbol

commit 8baefd30b5b0101aa07aa75da44a9eee881eed28 of linux-next replaced
a `switch()' statement with some `if()' statements, but left `break's
in the `switch()' statement untouched. This cause read config loop to
exit and so "make oldconfig" is not much usable (see below).

> $ make oldconfig
><snip>
> scripts/kconfig/conf --oldconfig Kconfig
> #
> # using defaults found in /boot/config-2.6.34-ccs-r1
> #
> *
> * Restart config...
> *
> *
> * General setup
> *
> Prompt for development and/or incomplete code/drivers (EXPERIMENTAL) [N/y/?] (NEW)

(I've already have "CONFIG_EXPERIMENTAL=y" in the old config file. But
that's not read here.)

This patch should fix this problem.

Signed-off-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agoMerge branch 'kbuild/kconfig/kbuild-generic-v7' of http://github.com/lacombar/linux...
Michal Marek [Mon, 27 Sep 2010 21:24:53 +0000]
Merge branch 'kbuild/kconfig/kbuild-generic-v7' of github.com/lacombar/linux-2.6 into kbuild/kconfig

* 'kbuild/kconfig/kbuild-generic-v7' of http://github.com/lacombar/linux-2.6:
  kbuild: migrate all arch to the kconfig mainmenu upgrade
  kconfig: expand file names
  kconfig: use the file's name of sourced file
  kconfig: constify file name
  kconfig: don't emit warning upon rootmenu's prompt redefinition
  kconfig: replace KERNELVERSION usage by the mainmenu's prompt
  kconfig: delay gconf window initialization
  kconfig: expand by default the rootmenu's prompt
  kconfig: add a symbol string expansion helper
  kconfig: regen parser
  kconfig: implement the `mainmenu' directive
  kconfig: allow PACKAGE to be defined on the compiler's command-line
  kconfig: rephrase help texts/comments not to include the package name
  kconfig: allow build-time definition of the internal config prefix
  kconfig: rephrase help text not to mention the internal prefix
  kconfig: replace a `switch()' statement by a more flexible `if()' statement

8 years agokconfig: fix menuconfig on debian lenny
Junio C Hamano [Sun, 19 Sep 2010 02:25:32 +0000]
kconfig: fix menuconfig on debian lenny

In 60f33b8 (kconfig: get rid of stray a.o, support ncursesw, 2006-01-15),
support to link menuconfig with ncursesw library was added.  To compute
the linker command option -l, we check "libncursesw.{so,a,dylib}" to allow
ncursesw to be used as a replacement ncurses.  However, when checking what
header file to include, we do not check /usr/include/ncursesw directory.

Add /usr/include/ncursesw to the list of directories that are checked.
With this patch, on my Debian Lenny box with libncursesw5-dev package but
not libncurses5-dev package, I can say "make menuconfig".

Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokbuild: migrate all arch to the kconfig mainmenu upgrade
Arnaud Lacombe [Sat, 4 Sep 2010 21:10:20 +0000]
kbuild: migrate all arch to the kconfig mainmenu upgrade

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: expand file names
Arnaud Lacombe [Sat, 4 Sep 2010 20:11:26 +0000]
kconfig: expand file names

This will allow to use the following construct in source files:

config FOO
    string
    default "foo"

source "$FOO/Kconfig"

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: use the file's name of sourced file
Arnaud Lacombe [Sat, 4 Sep 2010 20:09:26 +0000]
kconfig: use the file's name of sourced file

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: constify file name
Arnaud Lacombe [Sat, 4 Sep 2010 20:03:30 +0000]
kconfig: constify file name

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: don't emit warning upon rootmenu's prompt redefinition
Arnaud Lacombe [Sat, 4 Sep 2010 20:05:15 +0000]
kconfig: don't emit warning upon rootmenu's prompt redefinition

This silences the warning printed upon prompt redefinition for the rootmenu.
We will encounter this redefinition when a "mainmenu" statement is specified and
override the default prompt.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: replace KERNELVERSION usage by the mainmenu's prompt
Arnaud Lacombe [Wed, 18 Aug 2010 05:57:13 +0000]
kconfig: replace KERNELVERSION usage by the mainmenu's prompt

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: delay gconf window initialization
Arnaud Lacombe [Mon, 20 Sep 2010 02:47:17 +0000]
kconfig: delay gconf window initialization

Delay the window initialization to let the rootmenu's prompt be
initialized as it will be used to get the window's title.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>

8 years agokconfig: expand by default the rootmenu's prompt
Arnaud Lacombe [Fri, 10 Sep 2010 01:17:26 +0000]
kconfig: expand by default the rootmenu's prompt

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: add a symbol string expansion helper
Arnaud Lacombe [Wed, 18 Aug 2010 05:23:50 +0000]
kconfig: add a symbol string expansion helper

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: regen parser
Arnaud Lacombe [Sat, 11 Sep 2010 01:23:28 +0000]
kconfig: regen parser

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: implement the `mainmenu' directive
Arnaud Lacombe [Tue, 17 Aug 2010 02:55:31 +0000]
kconfig: implement the `mainmenu' directive

If specified, the directive must be placed at the top of the Kconfig file.

We need to change the grammar to make the mainmenu directive set the
`rootmenu' prompt. This reflect how menu_add_prompt() works internally, ie.
set the prompt of the `current_entry', pointing originally to `rootmenu'.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: allow PACKAGE to be defined on the compiler's command-line
Arnaud Lacombe [Sat, 21 Aug 2010 05:20:52 +0000]
kconfig: allow PACKAGE to be defined on the compiler's command-line

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: rephrase help texts/comments not to include the package name
Arnaud Lacombe [Sun, 15 Aug 2010 03:51:40 +0000]
kconfig: rephrase help texts/comments not to include the package name

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Randy Dunlap <rdunlap@xenotime.net>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: allow build-time definition of the internal config prefix
Arnaud Lacombe [Sun, 15 Aug 2010 03:57:43 +0000]
kconfig: allow build-time definition of the internal config prefix

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: rephrase help text not to mention the internal prefix
Arnaud Lacombe [Sat, 21 Aug 2010 04:43:46 +0000]
kconfig: rephrase help text not to mention the internal prefix

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: replace a `switch()' statement by a more flexible `if()' statement
Arnaud Lacombe [Tue, 24 Aug 2010 04:14:47 +0000]
kconfig: replace a `switch()' statement by a more flexible `if()' statement

With the upcoming dynamical configuration prefix, we can no longer assume that
the prefix will start by a 'C'. As such, we can no longer hardcode this value in
the `case ...:', so replace the `switch() { ... }' statement by a more flexible
'if () { ... }' statement.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Michal Marek <mmarek@suse.cz>

8 years agoscripts/kconfig/gconf.glade Update broken web addresses.
Justin P. Mattock [Mon, 13 Sep 2010 19:55:56 +0000]
scripts/kconfig/gconf.glade Update broken web addresses.

As discussed, remove the DOCTYPE declaration since libglade validates
the file against itself..

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig: Simplify Makefile for xconfig
Michal Marek [Mon, 13 Sep 2010 11:41:31 +0000]
kconfig: Simplify Makefile for xconfig

Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agoFix QT4 moc, cflags libs detection on dual QT3/Qt4 systems
Alexander Stein [Fri, 10 Sep 2010 17:01:14 +0000]
Fix QT4 moc, cflags libs detection on dual QT3/Qt4 systems

On system with QT3 and QT4 qmake in PATH may be from QT3. So we use
pkg-config for proper QT4 detection.
By reqesting cflags and libs for either QtCore, QtGui and QtSupport include
dirs and libs get listed several times, but so we won't mis anything

Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agonconfig: Fix help for choice menus
Stephen Boyd [Fri, 10 Sep 2010 08:32:50 +0000]
nconfig: Fix help for choice menus

When getting the help for a choice menu with a help section (for example
the "Choose SLAB allocator" menu) nconfig pops up a window with nothing
inside it. This is due to show_help() passing an empty string to
show_scroll_win()'s 3rd argument. The option really does have help
though, but it isn't a config symbol, so just add the help text for
the option, and don't try to add anything else like the config option
name.

Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Acked-by: Nir Tzachar <nir.tzachar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokbuild: fix oldnoconfig to do the right thing
Kyle McMartin [Wed, 1 Sep 2010 15:21:30 +0000]
kbuild: fix oldnoconfig to do the right thing

Commit 861b4ea4 broke oldnoconfig when removed the oldnoconfig checks on
                       if (input_mode == nonint_oldconfig ||
                           input_mode == oldnoconfig) {
                               if (input_mode == nonint_oldconfig &&
                                   sym->name &&
                                    !sym_is_choice_value(sym)) {
to avoid oldnoconfig chugging through the else stanza.

Fix that to restore expected behaviour (which I've confirmed in the
Fedora kernel build that the configs end up looking the same.)

Signed-off-by: Kyle McMartin <kyle@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agoxconfig: Change the titlebar if using Qt3
Michal Marek [Wed, 1 Sep 2010 15:39:27 +0000]
xconfig: Change the titlebar if using Qt3

Qt4 is now used by default and will get more testing. In case someone
still uses Qt3 and reports a bug, make it easy to recognize that this is
Qt3.

Acked-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokconfig qconf: port to QT4
Alexander Stein [Tue, 31 Aug 2010 15:34:37 +0000]
kconfig qconf: port to QT4

A straight forward port to QT4 using qt3to4 and compiling against
  qt3support

* Use pkg-config to detect QT4 which is hopefully portable enough
* If no QT4, QT3 will by tried instead
* Classes renamed using qt3to4
  * If build using QT3 renamed to QT3 class names using defines
* ConfigInfoView::menu has to be renamed as QT4 moc strips struct from
  struct menu and creates a name conflict
* QT2 support has been dropped
* The hidden options inserted in 39a4897c1bb66e8a36043c105d7fd73d8b32b480
  are use in native API

Signed-off-by: Alexander Stein <alexander.stein@informatik.tu-chemnitz.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>

8 years agokbuild: use getopt_long(), not its _only() variant
Arnaud Lacombe [Mon, 23 Aug 2010 16:01:24 +0000]
kbuild: use getopt_long(), not its _only() variant

NetBSD lacks getopt_long_only() whereas getopt_long() works just fine.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: don't overwrite HOST_EXTRACFLAGS
Arnaud Lacombe [Mon, 23 Aug 2010 00:03:06 +0000]
kbuild: don't overwrite HOST_EXTRACFLAGS

This might be used by the user to specify extra arguments for the host
compiler.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agosetlocalversion: Ignote SCMs above the linux source tree
Michal Marek [Mon, 16 Aug 2010 15:09:52 +0000]
setlocalversion: Ignote SCMs above the linux source tree

Dan McGee <dpmcgee@gmail.com> writes:
> Note that when in git, you get the appended "+" sign. If
> LOCALVERSION_AUTO is set, you will get something like
> "eee-gb01b08c-dirty" (whereas the copy of the tree in /tmp still
> returns "eee"). It doesn't matter whether the working tree is dirty or
> clean.
>
> Is there a way to disable this? I'm building from a clean tarball that
> just happens to be unpacked inside a git repository. One would think
> setting LOCALVERSION_AUTO to false would do it, but no such luck...

Fix this by checking if the kernel source tree is the root of the git or
hg repository. No fix for svn: If the kernel source is not tracked in
the svn repository, it works as expected, otherwise determining the
'repository root' is not really a defined task.

Reported-and-tested-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agomakefile: not need to regenerate kernel.release file when make kernelrelease
Amerigo Wang [Fri, 20 Aug 2010 09:36:06 +0000]
makefile: not need to regenerate kernel.release file when make kernelrelease

Brice reported that 'kernelrelease' has a dependence on include/config/kernel.release,
causes this file to be regenerated every time when invoke it. It doesn't have to.

Reported-by: Brice Goglin <Brice.Goglin@inria.fr>
Tested-by: Brice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoMerge commit 'v2.6.36-rc1' into kbuild/rc-fixes
Michal Marek [Fri, 20 Aug 2010 11:53:08 +0000]
Merge commit 'v2.6.36-rc1' into kbuild/rc-fixes

9 years agofixes for using make 3.82
Jan Beulich [Mon, 16 Aug 2010 10:58:58 +0000]
fixes for using make 3.82

It doesn't like pattern and explicit rules to be on the same line,
and it seems to be more picky when matching file (or really directory)
names with different numbers of trailing slashes.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Andrew Benton <b3nton@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: fix typo
Arnaud Lacombe [Mon, 16 Aug 2010 04:19:06 +0000]
kbuild: fix typo

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: don't include `check-lxdialog' ldflags in global HOST_LOADLIBES
Arnaud Lacombe [Mon, 16 Aug 2010 04:19:04 +0000]
kbuild: don't include `check-lxdialog' ldflags in global HOST_LOADLIBES

On BSD systems, `check-lxdialog' would select -lcurses as the default
curses library which would conflict with -lncurses at runtime: curses'
compatible symbols are getting handled by the system's curses library while the
ncurses-specific symbols are getting handled by the ports' ncurses.

This fixes `nconf' segmentation fault on these systems.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokbuild: confdata.c explicitly reference errno, thus need <errno.h>
Arnaud Lacombe [Tue, 17 Aug 2010 05:40:20 +0000]
kbuild: confdata.c explicitly reference errno, thus need <errno.h>

This fixes:
% gmake LKC_GENPARSER=1 menuconfig
[...]
scripts/kconfig/confdata.c:739: error: 'errno' undeclared (first use in this function)
scripts/kconfig/confdata.c:739: error: (Each undeclared identifier is reported only once
scripts/kconfig/confdata.c:739: error: for each function it appears in.)
scripts/kconfig/confdata.c:739: error: 'ENOENT' undeclared (first use in this function)

triggered on NetBSD.

Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agonconfig: add search support
Nir Tzachar [Sun, 8 Aug 2010 13:50:06 +0000]
nconfig: add search support

Remove the old hotkeys feature, and replace it by an interactive string
search.
From nconfig help:

Searching: pressing '/' triggers interactive search mode.
           nconfig performs a case insensitive search for the string
           in the menu prompts (no regex support).
           Pressing the up/down keys highlights the previous/next
           matching item. Backspace removes one character from the
           match string. Pressing either '/' again or ESC exits
           search mode. All other keys behave normally.

Miscellaneous other changes (including Rundy's and Justin's input).

Signed-off-by: Nir Tzachar <nir.tzachar@gmail.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoLinux 2.6.36-rc1
Linus Torvalds [Mon, 16 Aug 2010 00:41:37 +0000]
Linux 2.6.36-rc1

9 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Mon, 16 Aug 2010 00:37:07 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  gcc-4.6: ACPI: fix unused but set variables in ACPI
  ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS
  ACPI processor: remove deprecated ACPI procfs I/F
  ACPI power_resource: remove unused procfs I/F
  ACPI: remove deprecated ACPI procfs I/F
  ACPI: introduce drivers/acpi/sysfs.c
  ACPI: introduce module parameter acpi.aml_debug_output
  ACPI: introduce drivers/acpi/debugfs.c
  ACPI, APEI, ERST debug support
  ACPI, APEI, Manage GHES as platform devices
  ACPI, APEI, Rename CPER and GHES severity constants
  ACPI, APEI, Fix a typo of error path of apei_resources_request
  ACPI / ACPICA: Fix reference counting problems with GPE handlers
  ACPI: Add the check of ADR flag in course of finding ACPI handle for PCI device
  ACPI / Sleep: Drop acpi_suspend_finish()
  ACPI / Sleep: Consolidate suspend and hibernation routines
  ACPI / Wakeup: Simplify enabling of wakeup devices
  ACPI / Sleep: Rework enabling wakeup devices
  ACPI / Sleep: Free NVS copy if suspending of devices fails

Fixed up totally buggered "ACPI: fix unused but set variables in ACPI"
patch that doesn't even compile in the merge.

Thanks to Sedat Dilek <sedat.dilek@googlemail.com> for noticing the
breakage before I even pulled.  And a big "Grrr.." at Len for not even
bothering to compile the tree before asking me to pull.

9 years agoMerge git://git.infradead.org/iommu-2.6
Linus Torvalds [Mon, 16 Aug 2010 00:34:20 +0000]
Merge git://git.infradead.org/iommu-2.6

* git://git.infradead.org/iommu-2.6:
  intel-iommu: Fix 32-bit build warning with __cmpxchg()
  intr-remap: allow disabling source id checking

9 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Mon, 16 Aug 2010 00:32:47 +0000]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6:
  mtd/nand_ids: Fix buswidth
  mtd/m25p80: fix test for end of loop
  mtd/m25p80: retlen is never NULL
  MIPS: Fix gen_nand probe structures contents
  gen_nand: Test if nr_chips field is valid
  BFIN: Fix gen_nand probe structures contents
  nand/denali: move all hardware initialization work to denali_hw_init
  nand/denali: Add a page check in denali_read_page & denali_read_page_raw
  nand/denali: use cpu_relax() while waiting for hardware interrupt
  nand/denali: change read_status function method
  nand/denali: Fixed check patch warnings
  ARM: Fix gen_nand probe structures contents
  mtd/nand_base: fix kernel-doc warnings & typos
  nand/denali: use dev_xx debug function to replace nand_dbg_print and some printk
  nand/denali: Fixed handle ECC error bugs
  nand/denali: use iowrite32() to replace denali_write32()
  nand/denali: Fixed probe function bugs

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile
Linus Torvalds [Mon, 16 Aug 2010 00:31:43 +0000]
Merge git://git./linux/kernel/git/cmetcalf/linux-tile

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: don't validate CROSS_COMPILE needlessly
  arch/tile: export only COMMAND_LINE_SIZE to userspace.
  arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
  arch/tile: Rename the hweight() implementations to __arch_hweight()
  arch/tile: extend syscall ABI to set r1 on return as well.
  arch/tile: Various cleanups.
  arch/tile: support backtracing on TILE-Gx
  arch/tile: Fix a couple of issues with the COMPAT code for TILE-Gx.
  arch/tile: Use separate, better minsec values for clocksource and sched_clock.
  arch/tile: correct a bug in freeing bootmem by VA for the optional second initrd.
  arch: tile: mm: pgtable.c: Removed duplicated #include
  arch: tile: kernel/proc.c Removed duplicated #include
  Add fanotify syscalls to <asm-generic/unistd.h>.
  arch/tile: support new kunmap_atomic() naming convention.
  tile: remove unused ISA_DMA_THRESHOLD define

Conflicts in arch/tile/configs/tile_defconfig (pick the mainline version
with the reduced defconfig).

9 years agoarch/tile: don't validate CROSS_COMPILE needlessly
Chris Metcalf [Sun, 15 Aug 2010 19:01:45 +0000]
arch/tile: don't validate CROSS_COMPILE needlessly

With this change, the arch/tile Makefile will only check for a valid
combination of CROSS_COMPILE vs "uname -m" for a few common targets
that are typically the ones we get wrong (vmlinux, all, and modules).
The change handles the case of an empty "make" goal like "make all".

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>

9 years agomm: fix up some user-visible effects of the stack guard page
Linus Torvalds [Sun, 15 Aug 2010 18:35:52 +0000]
mm: fix up some user-visible effects of the stack guard page

This commit makes the stack guard page somewhat less visible to user
space. It does this by:

 - not showing the guard page in /proc/<pid>/maps

   It looks like lvm-tools will actually read /proc/self/maps to figure
   out where all its mappings are, and effectively do a specialized
   "mlockall()" in user space.  By not showing the guard page as part of
   the mapping (by just adding PAGE_SIZE to the start for grows-up
   pages), lvm-tools ends up not being aware of it.

 - by also teaching the _real_ mlock() functionality not to try to lock
   the guard page.

   That would just expand the mapping down to create a new guard page,
   so there really is no point in trying to lock it in place.

It would perhaps be nice to show the guard page specially in
/proc/<pid>/maps (or at least mark grow-down segments some way), but
let's not open ourselves up to more breakage by user space from programs
that depends on the exact deails of the 'maps' file.

Special thanks to Henrique de Moraes Holschuh for diving into lvm-tools
source code to see what was going on with the whole new warning.

Reported-and-tested-by: François Valenduc <francois.valenduc@tvcablenet.be
Reported-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 15 Aug 2010 18:22:00 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: sound/usb/format: silence uninitialized variable warnings
  MAINTAINERS: Add Ian Lartey as comaintaner for Wolfson devices
  MAINTAINERS: Make Wolfson entry also cover CODEC drivers
  ASoC: Only tweak WM8994 chip configuration on devices up to rev D
  ASoC: Optimise DSP performance for WM8994
  ALSA: hda - Fix dynamic ADC change working again
  ALSA: hda - Restrict PCM parameters per ELD information over HDMI
  sound: oss: sh_dac_audio.c removed duplicated #include

9 years agoMerge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb...
Linus Torvalds [Sun, 15 Aug 2010 18:17:52 +0000]
Merge branch 'idle-release' of git://git./linux/kernel/git/lenb/linux-idle-2.6

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  intel_idle: recognize Lincroft Atom Processor
  intel_idle: no longer EXPERIMENTAL
  intel_idle: disable module support
  intel_idle: add support for Westmere-EX
  intel_idle: delete power_policy modparam, and choose substate functions
  intel_idle: delete substates DEBUG modparam

9 years agoarch/tile: export only COMMAND_LINE_SIZE to userspace.
Chris Metcalf [Sun, 15 Aug 2010 16:14:41 +0000]
arch/tile: export only COMMAND_LINE_SIZE to userspace.

This fixes a failure in "make headers_check" for tile.
I hadn't realized this file was exported to userspace by default.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

9 years agoarch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN
Chris Metcalf [Sat, 14 Aug 2010 00:43:39 +0000]
arch/tile: rename ARCH_KMALLOC_MINALIGN to ARCH_DMA_MINALIGN

See commit a6eb9fe105d5de0053b261148cee56c94b4720ca.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

9 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sun, 15 Aug 2010 12:34:02 +0000]
Merge branch 'fix/asoc' into for-linus

9 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Sun, 15 Aug 2010 12:33:56 +0000]
Merge branch 'fix/hda' into for-linus

9 years agoALSA: sound/usb/format: silence uninitialized variable warnings
Dan Carpenter [Sat, 14 Aug 2010 17:29:53 +0000]
ALSA: sound/usb/format: silence uninitialized variable warnings

Gcc complains that ret might be used uninitialized:

sound/usb/format.c: In function ‘snd_usb_parse_audio_format’:
sound/usb/format.c:354: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:354: note: ‘ret’ was declared here
sound/usb/format.c:414: warning: ‘ret’ may be used uninitialized in this function
sound/usb/format.c:414: note: ‘ret’ was declared here

I suppose it could be uninitialized if there is ever a UAC_VERSION_3
released. Anyway this patch is worthwhile if only to silence the gcc
warning.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoMerge branch 'linus' into release
Len Brown [Sun, 15 Aug 2010 05:06:31 +0000]
Merge branch 'linus' into release

Conflicts:
drivers/acpi/debug.c

Signed-off-by: Len Brown <len.brown@intel.com>

9 years agogcc-4.6: ACPI: fix unused but set variables in ACPI
Andi Kleen [Tue, 20 Jul 2010 22:18:36 +0000]
gcc-4.6: ACPI: fix unused but set variables in ACPI

Some minor improvements in error handling, but overall it was mostly dead
code.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS
Zhang Rui [Thu, 15 Jul 2010 02:46:44 +0000]
ACPI thermal: make procfs I/F depend on CONFIG_ACPI_PROCFS

Mark the ACPI thermal procfs I/F deprecated, because /sys/class/thermal/
is already available and has been working for years w/o any problem.

The ACPI thermal procfs I/F will be removed in 2.6.37.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS
Zhang Rui [Thu, 15 Jul 2010 02:46:43 +0000]
ACPI video: make procfs I/F depend on CONFIG_ACPI_PROCFS

Mark ACPI video driver procfs I/F deprecated, including:
/proc/acpi/video/*/info
/proc/acpi/video/*/DOS
/proc/acpi/video/*/ROM
/proc/acpi/video/*/POST
/proc/acpi/video/*/POST_info
/proc/acpi/video/*/*/info
/proc/acpi/video/*/*/state
/proc/acpi/video/*/*/EDID
and
/proc/acpi/video/*/*/brightness, because
1. we already have the sysfs I/F /sysclass/backlight/ as the replacement
of /proc/acpi/video/*/*/brightness.
2. the other procfs I/F is not useful for userspace.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI processor: remove deprecated ACPI procfs I/F
Zhang Rui [Thu, 15 Jul 2010 02:46:41 +0000]
ACPI processor: remove deprecated ACPI procfs I/F

Remove deprecated ACPI processor procfs I/F, including:
/proc/acpi/processor/CPUX/power
/proc/acpi/processor/CPUX/limit
/proc/acpi/processor/CPUX/info

/proc/acpi/processor/CPUX/throttling still exists,
as we don't have sysfs I/F available for now.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI power_resource: remove unused procfs I/F
Zhang Rui [Thu, 15 Jul 2010 02:46:38 +0000]
ACPI power_resource: remove unused procfs I/F

Remove unused ACPI power procfs I/F.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI: remove deprecated ACPI procfs I/F
Zhang Rui [Thu, 15 Jul 2010 02:46:33 +0000]
ACPI: remove deprecated ACPI procfs I/F

Rmove deprecated ACPI procfs I/F, including
/proc/acpi/debug_layer
/proc/acpi/debug_level
/proc/acpi/info
/proc/acpi/dsdt
/proc/acpi/fadt
/proc/acpi/sleep

because the sysfs I/F is already available
and has been working well for years.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI: introduce drivers/acpi/sysfs.c
Zhang Rui [Thu, 15 Jul 2010 02:46:30 +0000]
ACPI: introduce drivers/acpi/sysfs.c

Introduce drivers/acpi/sysfs.c.

code for ACPI sysfs I/F, including
#ifdef ACPI_DEBUG
/sys/module/acpi/parameters/debug_layer
/sys/module/acpi/parameters/debug_level
/sys/module/acpi/parameters/trace_method_name
/sys/module/acpi/parameters/trace_debug_layer
/sys/module/acpi/parameters/trace_debug_level
/sys/module/acpi/parameters/trace_state
#endif
/sys/module/acpi/parameters/acpica_version
/sys/firmware/acpi/tables/
/sys/firmware/acpi/interrupts/
is moved to this file.

No function change in this patch.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoMerge branch 'acpica-gpe' into release
Len Brown [Sun, 15 Aug 2010 04:25:40 +0000]
Merge branch 'acpica-gpe' into release

9 years agoMerge branch 'bugzilla-16422' into release
Len Brown [Sun, 15 Aug 2010 03:57:32 +0000]
Merge branch 'bugzilla-16422' into release

9 years agoMerge branch 'procfs-cleanup' into release
Len Brown [Sun, 15 Aug 2010 03:55:57 +0000]
Merge branch 'procfs-cleanup' into release

9 years agoMerge branch 'apei' into release
Len Brown [Sun, 15 Aug 2010 03:55:47 +0000]
Merge branch 'apei' into release

9 years agoMerge branch 'nvs' into release
Len Brown [Sun, 15 Aug 2010 03:55:44 +0000]
Merge branch 'nvs' into release

9 years agoACPI: introduce module parameter acpi.aml_debug_output
Zhang Rui [Thu, 15 Jul 2010 02:46:17 +0000]
ACPI: introduce module parameter acpi.aml_debug_output

Introduce module parameter acpi.aml_debug_output.

With acpi.aml_debug_output set, we can get AML debug object output
(Store (AAA, Debug)), even with CONFIG_ACPI_DEBUG cleared.

Together with the runtime custom method mechanism,
we can debug AML code problems without rebuilding the kernel.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI: introduce drivers/acpi/debugfs.c
Zhang Rui [Thu, 15 Jul 2010 02:46:15 +0000]
ACPI: introduce drivers/acpi/debugfs.c

Introduce drivers/acpi/debugfs.c.

Code for ACPI debugfs I/F,
i.e. /sys/kernel/debug/acpi/custom_method,
is moved to this file.

And make ACPI debugfs always built in,
even if CONFIG_ACPI_DEBUG is cleared.

BTW:this adds about 400bytes code to ACPI, when
CONFIG_ACPI_DEBUG is cleared.

[uaccess.h build fix from Andrew Morton <akpm@linux-foundation.org>]

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agointel_idle: recognize Lincroft Atom Processor
Arjan van de Ven [Thu, 22 Jul 2010 03:42:25 +0000]
intel_idle: recognize Lincroft Atom Processor

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoACPI, APEI, ERST debug support
Huang Ying [Thu, 12 Aug 2010 03:55:17 +0000]
ACPI, APEI, ERST debug support

This patch adds debugging/testing support to ERST. A misc device is
implemented to export raw ERST read/write/clear etc operations to user
space. With this patch, we can add ERST testing support to
linuxfirmwarekit ISO (linuxfirmwarekit.org) to verify the kernel
support and the firmware implementation.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/cleanup
Linus Torvalds [Sat, 14 Aug 2010 23:21:50 +0000]
Merge git://git./linux/kernel/git/sam/cleanup

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/cleanup:
  defconfig reduction
  kbuild: drop unifdef-y support
  archs: replace unifdef-y with header-y
  include: replace unifdef-y with header-y

9 years agofusion: add function parameter names to kernel-doc
Randy Dunlap [Sat, 14 Aug 2010 20:05:57 +0000]
fusion: add function parameter names to kernel-doc

Fix fusion missing kernel-doc:

  Warning(drivers/message/fusion/mptbase.c:649): No description found for parameter 'func_name'
  Warning(drivers/message/fusion/mptbase.c:8010): No description found for parameter 'cb_idx'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofs/dcache: fix function param name in kernel-doc
Randy Dunlap [Sat, 14 Aug 2010 20:05:31 +0000]
fs/dcache: fix function param name in kernel-doc

Fix parameter name in kernel-doc notation (causes a warning).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agofusion: fix non-kernel-doc comment block
Randy Dunlap [Sat, 14 Aug 2010 20:05:50 +0000]
fusion: fix non-kernel-doc comment block

Fix comment begin notation not to look like kernel-doc
since it's not.  Removes kernel-doc warnings.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agomm/page-writeback: fix non-kernel-doc function comments
Randy Dunlap [Sat, 14 Aug 2010 20:05:17 +0000]
mm/page-writeback: fix non-kernel-doc function comments

Remove leading /** from non-kernel-doc function comments to prevent
kernel-doc warnings.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoDocumentation: move SCSI parameters to their own text file
Randy Dunlap [Sat, 14 Aug 2010 19:36:14 +0000]
Documentation: move SCSI parameters to their own text file

Move SCSI parameters from kernel-parameters.txt to their own text file.

This continues a trend of moving non-core parameters out of
kernel-parameters.txt.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agokconfig: fix segfault when detecting recursive dependency
Sam Ravnborg [Sat, 14 Aug 2010 12:40:00 +0000]
kconfig: fix segfault when detecting recursive dependency

Following sample Kconfig generated a segfault:

config FOO
        bool
        select PERF_EVENTS if HAVE_HW_BREAKPOINT

config PERF_EVENTS
        bool

config HAVE_HW_BREAKPOINT
        bool
        depends on PERF_EVENTS

Fix by reverting back to a valid property if there was no
property on the stack of symbols.

The above pattern were seen in sh Kconfig.
A fix for the Kconfig file has been sent to the sh folks.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agokconfig: fix savedefconfig with choice marked optional
Sam Ravnborg [Sat, 14 Aug 2010 21:22:16 +0000]
kconfig: fix savedefconfig with choice marked optional

savedefconfig failed to save the correct minimal config
when it encountered a choice marked optional.

Consider following minimal configuration:
$cat Kconfig
choice
prompt "choice"
optional

config A
bool "a"

config B
bool "b"

endchoice

$cat .config | grep -v ^#
CONFIG_A=y

$conf --savedefconfig=defconfig Kconfig

would before this fix result in an empty file, because
kconfig would assume that CONFIG_A=y is a default value.
But because the choice is optional the default is that
both A and B are =n.

Fix so we handle optional choices correct.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>

9 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Sat, 14 Aug 2010 21:57:58 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (22 commits)
  hwmon: (via-cputemp) Remove bogus "SHOW" global variable
  hwmon: jc42 depends on I2C
  hwmon: (pc87427) Add a maintainer
  hwmon: (pc87427) Move sysfs file removal to a separate function
  hwmon: (pc87427) Add temperature monitoring support
  hwmon: (pc87427) Add support for the second logical device
  hwmon: (pc87427) Add support for manual fan speed control
  hwmon: (pc87427) Minor style cleanups
  hwmon: (pc87427) Handle disabled fan inputs properly
  hwmon: (w83627ehf) Add support for W83667HG-B
  hwmon: (w83627ehf) Driver cleanup
  hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller
  hwmon: Remove in[0-*]_fault from sysfs-interface
  hwmon: Add 4 current alarm/beep attributes to sysfs-interface
  hwmon: Add 3 critical limit attributes to sysfs-interface
  hwmon: (asc7621) Clean up and improve detect function
  hwmon: (it87) Export labels for internal sensors
  hwmon: (lm75) Add suspend/resume feature
  hwmon: (emc1403) Add power support
  hwmon: (ltc4245) Expose all GPIO pins as analog voltages
  ...

9 years agodefconfig reduction
Sam Ravnborg [Sat, 14 Aug 2010 20:05:58 +0000]
defconfig reduction

Use the defconfig files generated by "make savedefconfig" for
remaining defconfig files.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

9 years agokbuild: drop unifdef-y support
Sam Ravnborg [Sat, 14 Aug 2010 08:22:58 +0000]
kbuild: drop unifdef-y support

unifdef-y is not used anymore - drop remaining references

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

9 years agoarchs: replace unifdef-y with header-y
Sam Ravnborg [Sat, 14 Aug 2010 08:20:19 +0000]
archs: replace unifdef-y with header-y

unifdef-y and header-y have same semantic, so drop unifdef-y

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

9 years agoinclude: replace unifdef-y with header-y
Sam Ravnborg [Sat, 14 Aug 2010 08:15:12 +0000]
include: replace unifdef-y with header-y

unifdef-y and header-y has same semantic.
So there is no need to have both.

Drop the unifdef-y variant and sort all lines again

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Sat, 14 Aug 2010 19:34:34 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (28 commits)
  [SCSI] qla4xxx: fix compilation warning
  [SCSI] make error handling more robust in the face of reservations
  [SCSI] tgt: fix warning
  [SCSI] drivers/message/fusion: Adjust confusing if indentation
  [SCSI] Return NEEDS_RETRY for eh commands with status BUSY
  [SCSI] ibmvfc: Driver version 1.0.9
  [SCSI] ibmvfc: Fix terminate_rport_io
  [SCSI] ibmvfc: Fix rport add/delete race resulting in oops
  [SCSI] lpfc 8.3.16: Change LPFC driver version to 8.3.16
  [SCSI] lpfc 8.3.16: FCoE Discovery and Failover Fixes
  [SCSI] lpfc 8.3.16: SLI Additions, updates, and code cleanup
  [SCSI] pm8001: introduce missing kfree
  [SCSI] qla4xxx: Update driver version to 5.02.00-k3
  [SCSI] qla4xxx: Added AER support for ISP82xx
  [SCSI] qla4xxx: Handle outstanding mbx cmds on hung f/w scenarios
  [SCSI] qla4xxx: updated mbx_sys_info struct to sync with FW 4.6.x
  [SCSI] qla4xxx: clear AF_DPC_SCHEDULED flage when exit from do_dpc
  [SCSI] qla4xxx: Stop firmware before doing init firmware.
  [SCSI] qla4xxx: Use the correct request queue.
  [SCSI] qla4xxx: set correct value in sess->recovery_tmo
  ...

9 years agohwmon: (via-cputemp) Remove bogus "SHOW" global variable
H. Peter Anvin [Sat, 14 Aug 2010 19:09:02 +0000]
hwmon: (via-cputemp) Remove bogus "SHOW" global variable

The via-cputemp hwmon driver was probably intending "typedef enum {
... } SHOW;", but the "typedef" was missing creating a global variable
named "SHOW".  There is absolutely no reason to have this in the
global namespace.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Acked-by: Harald Welte <HaraldWelte@viatech.com>
Cc: Juerg Haefliger <juergh@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agohwmon: jc42 depends on I2C
Randy Dunlap [Sat, 14 Aug 2010 19:09:01 +0000]
hwmon: jc42 depends on I2C

jc42 uses i2c interfaces, so it should depend on I2C.

drivers/hwmon/jc42.c:426: error: implicit declaration of function 'i2c_check_functionality'
drivers/hwmon/jc42.c:521: error: implicit declaration of function 'i2c_smbus_read_word_data'
drivers/hwmon/jc42.c:529: error: implicit declaration of function 'i2c_smbus_write_word_data'
drivers/hwmon/jc42.c:580: error: implicit declaration of function 'i2c_add_driver'
drivers/hwmon/jc42.c:585: error: implicit declaration of function 'i2c_del_driver'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agohwmon: (pc87427) Add a maintainer
Jean Delvare [Sat, 14 Aug 2010 19:09:00 +0000]
hwmon: (pc87427) Add a maintainer

As I made significant changes to the pc87427 driver, I'll be
maintaining it for the year to come.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agohwmon: (pc87427) Move sysfs file removal to a separate function
Jean Delvare [Sat, 14 Aug 2010 19:09:00 +0000]
hwmon: (pc87427) Move sysfs file removal to a separate function

The sysfs file removal code is the same in the probe error path and in
the remove function, so move it to a separate function to avoid code
duplication.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

9 years agohwmon: (pc87427) Add temperature monitoring support
Jean Delvare [Sat, 14 Aug 2010 19:08:59 +0000]
hwmon: (pc87427) Add temperature monitoring support

Add support for the 6 temperature monitoring channels of the PC87427.
Note that the sensors resolution can vary, and I couldn't find a way
to figure it out, so we might have to compensate in user-space.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

9 years agohwmon: (pc87427) Add support for the second logical device
Jean Delvare [Sat, 14 Aug 2010 19:08:58 +0000]
hwmon: (pc87427) Add support for the second logical device

The second logical device contains the voltage and temperature
registers. We have to extend the driver to support a second logical
device before we can add support for these features.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

9 years agohwmon: (pc87427) Add support for manual fan speed control
Jean Delvare [Sat, 14 Aug 2010 19:08:58 +0000]
hwmon: (pc87427) Add support for manual fan speed control

Add initial support for PWM outputs of the PC87427 Super-I/O chip.
Only mode change and manual fan speed control are supported. Automatic
mode configuration isn't supported, and won't be until at least one
board is known, which makes uses of the PWM outputs.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

9 years agohwmon: (pc87427) Minor style cleanups
Jean Delvare [Sat, 14 Aug 2010 19:08:57 +0000]
hwmon: (pc87427) Minor style cleanups

Follow the best practice of the day.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

9 years agohwmon: (pc87427) Handle disabled fan inputs properly
Jean Delvare [Sat, 14 Aug 2010 19:08:56 +0000]
hwmon: (pc87427) Handle disabled fan inputs properly

Most fan input pins of the PC87427 can have alternate functions.
Update the driver to check the configuration register and only support
fan inputs which are really used for fan monitoring.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

9 years agohwmon: (w83627ehf) Add support for W83667HG-B
Guenter Roeck [Sat, 14 Aug 2010 19:08:55 +0000]
hwmon: (w83627ehf) Add support for W83667HG-B

Add support for W83667HG-B (very similar to the W83667HG).

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

9 years agohwmon: (w83627ehf) Driver cleanup
Guenter Roeck [Sat, 14 Aug 2010 19:08:55 +0000]
hwmon: (w83627ehf) Driver cleanup

- Moved fan pwm register array pointers into per-instance data.
- Only read fan pwm data for installed/supported fans.
- Update fan max output and fan step output information from data in
  registers.
- Create max_output and step_output attribute files only if respective
  fan pwm registers exist.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>