12 years ago[ARM] 4272/1: Missing symbol h1940_pm_return fix
Krzysztof Helt [Mon, 19 Mar 2007 14:10:20 +0000]
[ARM] 4272/1: Missing symbol h1940_pm_return fix

Added missing ifdefs, to make kernel linkable without the PM support.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] 4235/1: ns9xxx: declare the clock functions as "const"
Uwe Kleine-König [Fri, 23 Feb 2007 19:52:19 +0000]
[ARM] 4235/1: ns9xxx: declare the clock functions as "const"

This patch removes some "const"s that I introduced thinking they mean
the same thing as the "const"s introduced here.  So it fixes three warnings.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms)
Dan Williams [Fri, 16 Mar 2007 18:31:06 +0000]
[ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms)

An iq80219 is a board with an iq31244 layout and an 80219 processor.  It
breaks the current assumption that all 80219 processors run on ep80219
platforms.  This patch adds the "force_ep80219" option to the kernel to
override boot loaders that have passed in the iq31244 id, and adds the
MACHINE_START definition for ep80219.

[ patch assumes that EP80219 has been added to mach-types ]

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqs
Graeme Gregory [Fri, 16 Mar 2007 16:11:43 +0000]
[ARM] 4270/2: mach-s3c2443/irq.c off by one error in dma irqs

This patch corrects an error when demuxing the DMA irq's
DMA1 was used as a base and this should have been DMA0.
Without this fix we do not process DMA0 irq's and the
system effectively locks up in a loop trying the process
the irq it never can.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] 4264/1: ldrex/strex syntax errors with recent compilers
Stelian Pop [Thu, 15 Mar 2007 15:54:27 +0000]
[ARM] 4264/1: ldrex/strex syntax errors with recent compilers

Trying to build some code using atomic_clear_mask() on a ARM v6
processor with a recent compiler (tried with gcc version 4.1.1
(CodeSourcery ARM Sourcery G++ 2006q3-26), but
all gcc > 4.1 might be affected) results in the following:

/tmp/ccWKLJV8.s: Assembler messages:
/tmp/ccWKLJV8.s:581: Error: instruction does not accept this addressing
mode -- `ldrex r0,r3'
/tmp/ccWKLJV8.s:583: Error: instruction does not accept this addressing
mode -- `strex r1,r0,r3'

Older gcc (like gcc version 4.0.0 (DENX ELDK 4.1 4.0.0)) have no problem
with this.

The patch below fixes the compile error. I also verified that gcc-4.0.0 generates identical code using both forms.

Signed-off-by: Stelian Pop <stelian@popies.net>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] Fix breakage caused by 72486f1f8f0a2bc828b9d30cf4690cf2dd6807fc
Russell King [Tue, 13 Mar 2007 09:54:21 +0000]
[ARM] Fix breakage caused by 72486f1f8f0a2bc828b9d30cf4690cf2dd6807fc

72486f1f8f0a2bc828b9d30cf4690cf2dd6807fc inverted the sense for
enabling hotplug CPU controls without reference to any other
architecture other than i386, ia64 and PowerPC.  This left
everyone else without hotplug CPU control.

Fix ARM for this brain damage.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years agoMerge branch 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Tue, 13 Mar 2007 01:13:45 +0000]
Merge branch 'merge' of /linux/kernel/git/paulus/powerpc

* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] sys_move_pages should be callable from an SPU
  [POWERPC] Wire up sys_epoll_pwait
  [POWERPC] Allocate syscall number for sys_getcpu
  [POWERPC] update cell_defconfig
  [POWERPC] ps3: always make sure were running on a PS3
  [POWERPC] Fix spu SLB invalidations
  [POWERPC] avoid SPU_ACTIVATE_NOWAKE optimization
  [POWERPC] spufs: fix possible memory corruption is spufs_mem_write

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Tue, 13 Mar 2007 01:13:02 +0000]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC]: Fix TIF_USEDFPU flag atomicity
  [SPARC64]: Fix atomicity of TIF update in flush_thread()
  [BW2]: Fix section mismatch warnings.
  [CG14]: Fix section mismatch warnings.
  [SPARC]: We do not need OLD_GETRLIMIT.

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 13 Mar 2007 01:12:42 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [XFRM]: Fix missing protocol comparison of larval SAs.
  [WANROUTER]: Delete superfluous source file "net/wanrouter/af_wanpipe.c".
  [IPV4]: Fix warning in ip_mc_rejoin_group.
  [ROSE]: Socket locking is a great invention.
  [ROSE]: Remove ourselves from waitqueue when receiving a signal
  [NetLabel]: parse the CIPSO ranged tag on incoming packets

12 years ago[XFRM]: Fix missing protocol comparison of larval SAs.
Joy Latten [Tue, 13 Mar 2007 00:14:07 +0000]
[XFRM]: Fix missing protocol comparison of larval SAs.

I noticed that in xfrm_state_add we look for the larval SA in a few
places without checking for protocol match. So when using both
AH and ESP, whichever one gets added first, deletes the larval SA.
It seems AH always gets added first and ESP is always the larval
SA's protocol since the xfrm->tmpl has it first. Thus causing the
additional km_query()

Adding the check eliminates accidental double SA creation.

Signed-off-by: Joy Latten <latten@austin.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[SPARC]: Fix TIF_USEDFPU flag atomicity
William Lee Irwin III [Tue, 13 Mar 2007 00:08:25 +0000]
[SPARC]: Fix TIF_USEDFPU flag atomicity

From: William Lee Irwin III <wli@holomorphy.com>

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[WANROUTER]: Delete superfluous source file "net/wanrouter/af_wanpipe.c".
Robert P. J. Day [Tue, 13 Mar 2007 00:06:27 +0000]
[WANROUTER]: Delete superfluous source file "net/wanrouter/af_wanpipe.c".

Delete the apparently superfluous source file
net/wanrouter/af_wanpipe.c.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV4]: Fix warning in ip_mc_rejoin_group.
Geert Uytterhoeven [Tue, 13 Mar 2007 00:02:37 +0000]
[IPV4]: Fix warning in ip_mc_rejoin_group.

Kill warning about unused variable `in_dev' when CONFIG_IP_MULTICAST
is not set.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[PATCH] Fix vmi time header bug
Zachary Amsden [Mon, 12 Mar 2007 22:58:08 +0000]
[PATCH] Fix vmi time header bug

Some gcc put this function in .init.text because the header didn't
match.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] Fix VMI and COMPAT_VDSO for 2.6.21
Zachary Amsden [Sat, 10 Mar 2007 07:00:30 +0000]
[PATCH] Fix VMI and COMPAT_VDSO for 2.6.21

VMI is broken under COMPAT_VDSO, as Xen and other non hardware assisted
hypervisors will be.  I have been working on a fix for this which works
for older glibcs that panic when the new relocatable VDSO is used.

However, I believe at this time that the fix is going to be too radical
to consider at this stage in the release of 2.6.21.  We don't expect
this config option to be turned on by vendors for new distributions, so
at this point we are willing to drop support for it when VMI is compiled
in, and work on a patch for 2.6.22 which more fully addresses the
problem.

Signed-off-by: Zachary Amsden <zach@vmware.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] pci: Repair pci_save/restore_state so we can restore one save many times.
Eric W. Biederman [Thu, 8 Mar 2007 20:06:13 +0000]
[PATCH] pci: Repair pci_save/restore_state so we can restore one save many times.

Because we do not reserve space for the pci-x and pci-e state in struct
pci dev we need to dynamically allocate it.  However because we need
to support restore being called multiple times after a single save
it is never safe to free the buffers we have allocated to hold the
state.

So this patch modifies the save routines to first check to see
if we have already allocated a state buffer before allocating
a new one.  Then the restore routines are modified to not free
the state after restoring it.  Simple and it fixes some subtle
error path handling bugs, that are hard to test for.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] msi: Safer state caching.
Eric W. Biederman [Thu, 8 Mar 2007 20:04:57 +0000]
[PATCH] msi: Safer state caching.

There are two ways pci_save_state and pci_restore_state are used.  As
helper functions during suspend/resume, and as helper functions around
a hardware reset event.  When used as helper functions around a hardware
reset event there is no reason to believe the calls will be paired, nor
is there a good reason to believe that if we restore the msi state from
before the reset that it will match the current msi state.  Since arch
code may change the msi message without going through the driver, drivers
currently do not have enough information to even know when to call
pci_save_state to ensure they will have msi state in sync with the other
kernel irq reception data structures.

It turns out the solution is straight forward, cache the state in the
existing msi data structures (not the magic pci saved things) and
have the msi code update the cached state each time we write to the hardware.
This means we never need to read the hardware to figure out what the hardware
state should be.

By modifying the caching in this manner we get to remove our save_state
routines and only need to provide restore_state routines.

The only fields that were at all tricky to regenerate were the msi and msi-x
control registers and the way we regenerate them currently is a bit dependent
upon assumptions on how we use the allow msi registers to be configured and used
making the code a little bit brittle.  If we ever change what cases we allow
or how we configure the msi bits we can address the fragility then.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[ROSE]: Socket locking is a great invention.
Ralf Baechle [Mon, 12 Mar 2007 22:53:33 +0000]
[ROSE]: Socket locking is a great invention.

Especially if you actually try to do it ;-)

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[ROSE]: Remove ourselves from waitqueue when receiving a signal
Ralf Baechle [Mon, 12 Mar 2007 22:52:52 +0000]
[ROSE]: Remove ourselves from waitqueue when receiving a signal

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[NetLabel]: parse the CIPSO ranged tag on incoming packets
Paul Moore [Mon, 12 Mar 2007 21:38:02 +0000]
[NetLabel]: parse the CIPSO ranged tag on incoming packets

Commit 484b366932be0b73a22c74a82748ca10a721643e added support for the CIPSO
ranged categories tag.  However, it appears that I made a mistake when rebasing
then patch to the latest upstream sources for submission and dropped the part
of the patch that actually parses the tag on incoming packets.  This patch
fixes this mistake by adding the required function call to the
cipso_v4_skbuff_getattr() function.

I've run this patch over the weekend and have not noticed any problems.

Signed-off-by: Paul Moore <paul.moore@hp.com>
Acked-by: James Morris <jmorris@namei.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 12 Mar 2007 19:31:43 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 4263/1: fix IXP4XX_NPE[ABC]_BASE_VIRT address
  [ARM] 4256/1: i.MX/MX1 SDHC fix/workaround of SD card recognition problems
  [ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value.
  [ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV.
  [ARM] 4251/1: Fix sharpsl_pm dependency
  [ARM] 4250/1: Fix locomo backlight conversion error/compile failure
  [ARM] 4249/1: Fix tosa compile failure
  [ARM] 4248/1: lh7a40x: fix missing definitions for get_irqnr_preamble
  [ARM] 4247/1: Fix long name for cc9p9360dev
  ARM: OMAP: Fix OMAP2 dss2 so clk_set_parent works
  ARM: OMAP: Fix missing workqueue include in board-h2.c
  ARM: OMAP: Include missing header

12 years ago[ARM] 4263/1: fix IXP4XX_NPE[ABC]_BASE_VIRT address
Milan Svoboda [Mon, 12 Mar 2007 11:38:07 +0000]
[ARM] 4263/1: fix IXP4XX_NPE[ABC]_BASE_VIRT address

This fixs address defines for IXP4XX_NPE[ABC]_BASE_VIRT.
They are defined as (IXP4XX_PERIPHERAL_BASE_PHYS + 0x[678]000) now,
but they should be defined as (IXP4XX_PERIPHERAL_BASE_VIRT + 0x[678]000). Note PHYS vs VIRT in IXP4XX_PERIPHERAL_BASE...

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] 4256/1: i.MX/MX1 SDHC fix/workaround of SD card recognition problems
Pavel Pisa [Wed, 7 Mar 2007 23:00:40 +0000]
[ARM] 4256/1: i.MX/MX1 SDHC fix/workaround of SD card recognition problems

The SDHC controllers cannot process shorter transfers.
They has to be handled as longer ones, but it such case CRC
error is evaluated. There was a case in the code still,
where this error is not ignored as it should to be process
these transfers.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value.
Pavel Pisa [Wed, 7 Mar 2007 22:56:16 +0000]
[ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value.

Only System PLL clock source is selectable by CSCR_SYSTEM_SEL
bit. MPU PLL is driven by 512*CLK32 for each case.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV.
Pavel Pisa [Wed, 7 Mar 2007 22:52:40 +0000]
[ARM] 4254/1: i.MX/MX1 CPU Frequency scaling honor boot loader set BCLK_DIV.

The minimal bus clock prescaler should be kept at value
selected by the board / boot loader designer.
Switching frequency above startup limit could
lead to the external memory/devices misbehave.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

12 years ago[POWERPC] sys_move_pages should be callable from an SPU
Stephen Rothwell [Fri, 9 Mar 2007 00:58:11 +0000]
[POWERPC] sys_move_pages should be callable from an SPU

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Wire up sys_epoll_pwait
Stephen Rothwell [Fri, 9 Mar 2007 00:57:10 +0000]
[POWERPC] Wire up sys_epoll_pwait

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years ago[POWERPC] Allocate syscall number for sys_getcpu
Stephen Rothwell [Fri, 9 Mar 2007 00:54:57 +0000]
[POWERPC] Allocate syscall number for sys_getcpu

I forgot to do this when wiring up the syscall.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

12 years agoMerge branch 'cell-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/cell...
Paul Mackerras [Mon, 12 Mar 2007 04:47:23 +0000]
Merge branch 'cell-merge' of git://git./linux/kernel/git/arnd/cell-2.6 into merge

12 years agoRevert "USB: pxa2xx_udc: fix hardcoded irq number"
Linus Torvalds [Sat, 10 Mar 2007 22:22:07 +0000]
Revert "USB: pxa2xx_udc: fix hardcoded irq number"

This reverts commit d2487cb4257dafb686f682285854fe7f02ca29d8.

Russell King points out that it's obviously bogus, and I have to agree.
Not only does "irq" not even exist in that scope, but we obviously need
to free the irq that we actually requested, and that's IRQ_USB.

Reported-by: Russell King <rmk@arm.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Cc: David Brownell <david-b@pacbell.net>,
Cc: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[SPARC64]: Fix atomicity of TIF update in flush_thread()
Mathieu Desnoyers [Sat, 10 Mar 2007 08:19:49 +0000]
[SPARC64]: Fix atomicity of TIF update in flush_thread()

Fix atomicity of TIF update in flush_thread() for sparc64

Fixes correctly the race by using *_ti_thread_flag.

Race :

parent process executing :
sys_ptrace()
 (lock_kernel())
 (ptrace_get_task_struct(pid))
 arch_ptrace()
   ptrace_detach()
     ptrace_disable(child);
       clear_singlestep(child);
         clear_tsk_thread_flag(child, TIF_SINGLESTEP);
         (which clears the TIF_SINGLESTEP flag atomically from a different
          process)
 (put_task_struct(child))
 (unlock_kernel())

And at the same time, in the child process :
sys_execve()
 do_execve()
   search_binary_handler()
     load_elf_binary()
       flush_old_exec()
         flush_thread()
           doing a non-atomic thread flag update

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[BW2]: Fix section mismatch warnings.
Robert Reif [Fri, 9 Mar 2007 05:22:35 +0000]
[BW2]: Fix section mismatch warnings.

Fix section mismatch warnings by moving data into __devinitdata section.
Add __devinit to two initialization functions.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[CG14]: Fix section mismatch warnings.
Robert Reif [Fri, 9 Mar 2007 05:22:03 +0000]
[CG14]: Fix section mismatch warnings.

Fix section mismatch warning by moving data into __devinitdata section.
Add __devinit to an initialization function.

Signed-off-by: Robert Reif <reif@earthlink.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[SPARC]: We do not need OLD_GETRLIMIT.
David S. Miller [Fri, 9 Mar 2007 00:23:24 +0000]
[SPARC]: We do not need OLD_GETRLIMIT.

Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 10 Mar 2007 06:04:27 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [IPV6] fix ipv6_getsockopt_sticky copy_to_user leak
  [IPV6]: Fix for ipv6_setsockopt NULL dereference
  [DCCP]: Initialise write_xmit_timer also on passive sockets
  [IPV4]: Fix rtm_to_ifaddr() error handling.

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Sat, 10 Mar 2007 06:00:51 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
  [IA64] refresh config files
  [IA64] put kdump_find_rsvd_region in __init
  [IA64] Remove sparse warning from unwind code
  [IA64] add missing syscall trace clear
  [IA64] Cleanup in crash.c
  [IA64] kexec: declare ia64_mca_pal_base in mca.h rather than kexec.h
  [IA64] pci_get_legacy_ide_irq should return irq (not GSI)
  [IA64] whitespace fixes for include/asm-ia64/sal.h
  [IA64] Cache error recovery
  [IA64] Proper handling of TLB errors from duplicate itr.d dropins

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Sat, 10 Mar 2007 05:58:28 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  kobject: new_device->kref wasn't putted after error in kobject_move()
  driver core: export device_rename
  Remove devfs from MAINTAINERS
  Driver core: add device symlink back to sysfs
  Revert "driver core: refcounting fix"

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
Linus Torvalds [Sat, 10 Mar 2007 05:58:10 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/pci-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  pci: fix section mismatch warning
  PCI: aer: fix section mismatch warning
  pcie: fix section mismatch warning
  PCI: allow multiple calls to pcim_pin_device()

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Sat, 10 Mar 2007 05:57:46 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (23 commits)
  USB Elan FTDI: check for workqueue creation
  USB: fix spinlock recursion in cdc-acm.c
  USB: fix Unaligned access in EHCI driver
  USB: Product ID for FT232RL in ftdi_sio
  USBNET: DM9501: Add Corega FEther USB-TXC support.
  USB: ipaq.c: Additional devices
  USB: further fix for usb-serial
  USB: fix usb-serial device naming bug
  USB: RTS/DTR signal patch for airprime driver
  USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer
  usb-serial: fix shutdown / device_unregister order
  USB: add Additional PIDs in ftdi_sio
  USB: add QL355P power supply ids to fdti_sio
  USB: New device IDs for cp2101 driver
  USB: kill dead code from hub.c
  USB: ratelimit debounce error messages
  USB: pxa2xx_udc: fix hardcoded irq number
  UHCI: fix port resume problem
  USB: set the correct interval for interrupt URBs
  USB: goku_udc: Remove crude cache coherency code
  ...

12 years agoPull misc-for-upstream into release branch
Len Brown [Sat, 10 Mar 2007 04:19:50 +0000]
Pull misc-for-upstream into release branch

12 years agoPull bugzilla-8110 into release branch
Len Brown [Sat, 10 Mar 2007 04:19:25 +0000]
Pull bugzilla-8110 into release branch

12 years agoPull bugzilla-8066 into release branch
Len Brown [Sat, 10 Mar 2007 04:19:19 +0000]
Pull bugzilla-8066 into release branch

12 years agoPull bugzilla-7907 into release branch
Len Brown [Sat, 10 Mar 2007 04:18:53 +0000]
Pull bugzilla-7907 into release branch

12 years agoPull bugzilla-7570 into release branch
Len Brown [Sat, 10 Mar 2007 04:18:46 +0000]
Pull bugzilla-7570 into release branch

12 years agoPull bugzilla-6859 into release branch
Len Brown [Sat, 10 Mar 2007 04:18:35 +0000]
Pull bugzilla-6859 into release branch

12 years agoPull bugzilla-6316 into release branch
Len Brown [Sat, 10 Mar 2007 04:18:22 +0000]
Pull bugzilla-6316 into release branch

12 years agoPull bugzilla-5966 into release branch
Len Brown [Sat, 10 Mar 2007 04:18:05 +0000]
Pull bugzilla-5966 into release branch

12 years agoPull ibm into release branch
Len Brown [Sat, 10 Mar 2007 04:17:46 +0000]
Pull ibm into release branch

12 years agoPull altix into release branch
Len Brown [Sat, 10 Mar 2007 04:17:39 +0000]
Pull altix into release branch

12 years agoACPI: ec: fix race in status register access
Alexey Starikovskiy [Wed, 7 Mar 2007 23:29:35 +0000]
ACPI: ec: fix race in status register access

Delay the read of the EC status register until
after the event that caused it occurs -- otherwise
it is possible to read and act on stale status that was
associated with the previous event.

Do this with a perpetually incrementing "event_count" to detect
when a new event occurs and it is safe to read status.

There is no workaround for polling mode -- it is inherently
exposed to reading and acting on stale status, since it
doesn't have an interrupt to tell it the event completed.

http://bugzilla.kernel.org/show_bug.cgi?id=8110

Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoUSB Elan FTDI: check for workqueue creation
Cyrill Gorcunov [Tue, 6 Mar 2007 10:47:44 +0000]
USB Elan FTDI: check for workqueue creation

Avoid NULL pointer usage if workqueue creation failed.

Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: fix spinlock recursion in cdc-acm.c
Oliver Neukum [Tue, 6 Mar 2007 09:47:04 +0000]
USB: fix spinlock recursion in cdc-acm.c

this fixes the spinlock recursion issue. The older fix was incomplete.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: fix Unaligned access in EHCI driver
Max Dmitrichenko [Mon, 5 Mar 2007 23:45:01 +0000]
USB: fix Unaligned access in EHCI driver

I get following warnings on spar64:
Kernel unaligned access at TPC[1000c9e4] ehci_hub_control+0x54c/0x68c [ehci_hcd]

Despite of the comment in the patched code, the type cast used there
does make unaligned access. The fix was made as it's done in
ohci-hub.c.

Signed-off-by: Max Dmitrichenko <dmitrmax@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: Product ID for FT232RL in ftdi_sio
Gard Spreemann [Sun, 4 Mar 2007 23:03:26 +0000]
USB: Product ID for FT232RL in ftdi_sio

Here is a patch adding the PID for the FT232RL to ftdi_sio. The patch
generates a warning during compilation because get_ftdi_divisor doesn't
explicitly handle the FT232RL with this patch, so I guess you don't want
to use it in its current state. It is all I could come up with with the
knowledge I have of the drivers at the moment, though, and I hope you
can have some use for it at least. It works fine with my DLP-TILT with
an FT232RL.

From: Gard Spreemann <spreeman@stud.ntnu.no>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSBNET: DM9501: Add Corega FEther USB-TXC support.
YOSHIFUJI Hideaki [Sat, 3 Mar 2007 01:33:55 +0000]
USBNET: DM9501: Add Corega FEther USB-TXC support.

Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: ipaq.c: Additional devices
Andre Spahlinger [Mon, 5 Mar 2007 18:09:35 +0000]
USB: ipaq.c: Additional devices

Additional devices

Signed-off-by: Andre Spahlinger <uenz@gmx.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: further fix for usb-serial
Oliver Neukum [Mon, 5 Mar 2007 14:23:51 +0000]
USB: further fix for usb-serial

this is a fix for the outstanding usb-serial issues.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: fix usb-serial device naming bug
Oliver Neukum [Mon, 26 Feb 2007 14:43:00 +0000]
USB: fix usb-serial device naming bug

Am Montag, 26. Februar 2007 15:16 schrieb Craig Schlenter:
> Hi Greg
>
34ef50e5b1f96c2d8c0f3d28b7d407743806256c is definitely
> the source of the problem. Reverting that makes the
> ftdi port show up as ttyUSB0 again for me and it
> can actually be opened.

This patch should fix the issue.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Craig Schlenter <craig@codefountain.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: RTS/DTR signal patch for airprime driver
Martin Schiller [Thu, 1 Mar 2007 12:49:48 +0000]
USB: RTS/DTR signal patch for airprime driver

I encountered some problems with the airprime driver in use with a Novatel
Merlin XU870:

Closing an open Connection to e.g. /dev/ttyUSB0 doesn't reset the
RTS/DTR lines of the Modem.  Consequently, when I use minicom to
establish a connection by "ATD*99#" the modem doesn't hang up even if i
exit minicom and so I cannot reuse the modem unless I remove it and plug
it in again.

With the attached patch, the RTS/DTR lines are resetted on a close.  The
code was mainly taken from the option.c driver.

12 years agoUSB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer
Jim Radford [Wed, 28 Feb 2007 18:10:50 +0000]
USB: ftdi_sio: use port_probe / port_remove thereby fixing access to the latency_timer

Convert all the port specific code in attach / shutdown to use the new
port_probe / port_register callbacks from device_register /
device_unregister allowing adding the sysfs attributes to be added at
the correct time and to the serial port device itself, instead of to
the unadorned usb device, avoiding a NULL dereference.

Signed-off-by: Jim Radford <radford@blackbean.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agousb-serial: fix shutdown / device_unregister order
Jim Radford [Wed, 28 Feb 2007 16:14:13 +0000]
usb-serial: fix shutdown / device_unregister order

Ensure that the ->port_remove() callbacks get called before the
->shutdown() callback which makeing the order symmetric with
->attach() being called before ->port_probe().

Signed-off-by: Jim Radford <radford@blackbean.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: add Additional PIDs in ftdi_sio
Thomas Schleusener [Wed, 28 Feb 2007 21:50:52 +0000]
USB: add Additional PIDs in ftdi_sio

I've developed some devices with FTDI chips (FT232xx). FTDI was so kind
to give some own PID's which I can use together with their VID. Some of
the devices are already very popular here and I have customers from
universities, institutes .....

I use the FTDI VID 0x0403. My PID's are:

0xff38 - IBS US485 (USB<-->RS422/485 interface)
0xff39 - IBS PIC-Programmer
0xff3a - IBS Card reader for PCMCIA SRAM-cards
0xff3b - IBS PK1 - Particel counter
0xff3c - IBS RS232 - Monitor
0xff3d - APP 70 (dust monitoring system)
0xff3e - IBS PEDO-Modem (RF modem 868.35 MHz)
0xff3f - future device

The company is "IBS Ing.-Buero Schleusener".

From: Thomas Schleusener <thomas@be-schl.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: add QL355P power supply ids to fdti_sio
Michael Olberg [Tue, 27 Feb 2007 11:57:12 +0000]
USB: add QL355P power supply ids to fdti_sio

12 years agoUSB: New device IDs for cp2101 driver
Jon K Hellan [Wed, 28 Feb 2007 22:04:33 +0000]
USB: New device IDs for cp2101 driver

Here are two new device IDs for the cp2101 driver.
The diff is with linus's tree as of this evending.

From: Jon K Hellan <hellan@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: kill dead code from hub.c
Oliver Neukum [Thu, 1 Mar 2007 21:31:24 +0000]
USB: kill dead code from hub.c

this kills residual obsoletet code from hub.c

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: ratelimit debounce error messages
Oliver Neukum [Tue, 27 Feb 2007 09:25:00 +0000]
USB: ratelimit debounce error messages

flaky hardware can cause a lot of debounce failed messages. To limit
the performance impact, a ratelimit should be used.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: pxa2xx_udc: fix hardcoded irq number
Milan Svoboda [Tue, 27 Feb 2007 09:20:09 +0000]
USB: pxa2xx_udc: fix hardcoded irq number

This patch changes last use of hardcoded number of irq to
use platfrom_get_irq.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Acked-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUHCI: fix port resume problem
Alan Stern [Mon, 26 Feb 2007 22:16:06 +0000]
UHCI: fix port resume problem

This patch (as863) fixes a problem encountered sometimes when resuming
a port on a UHCI controller.  The hardware may turn off the
Resume-Detect bit before turning off the Suspend bit, leading usbcore
to think that the port is still suspended and the resume has failed.
The patch makes uhci_finish_suspend() wait until both bits are safely
off.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: set the correct interval for interrupt URBs
Alan Stern [Mon, 26 Feb 2007 19:56:14 +0000]
USB: set the correct interval for interrupt URBs

This patch (as862) fixes a couple of bugs in the way usbcore handles
intervals for interrupt URBs.  usb_interrupt_msg (and usb_bulk_msg for
backward compatibility) don't set the interval correctly for
high-speed devices.  proc_do_submiturb() doesn't set it correctly when
a bulk URB is submitted to an interrupt endpoint.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: goku_udc: Remove crude cache coherency code
Ralf Baechle [Mon, 26 Feb 2007 18:10:15 +0000]
USB: goku_udc: Remove crude cache coherency code

This is deep architecture specific magic and does should not to exist
in a driver.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB storage: Nokia 6288 unusual_devs entry
Andrew Nayenko [Sun, 25 Feb 2007 08:40:20 +0000]
USB storage: Nokia 6288 unusual_devs entry

This patch adds an usual_devs entry for the Nokia 6288. Originally from
Andrew with a re-diff by Phil.

From: Andrew Nayenko <relan@bk.ru>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB storage: Removed duplicate supertop unusual_dev entry
Phil Dibowitz [Sun, 25 Feb 2007 03:23:41 +0000]
USB storage: Removed duplicate supertop unusual_dev entry

This patch removes the duplicate supertop entries that made it into the
.21 rc kernels.

Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoUSB: at91_udc, fix more modpost bogosity (rename driver struct)
David Brownell [Sat, 24 Feb 2007 21:54:56 +0000]
USB: at91_udc, fix more modpost bogosity (rename driver struct)

Rename the driver struct used with at91_udc to prevent yet another
bogus warning from "modpost".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoACPI: Kconfig: hide ACPI menu when CONFIG_PM=n
Robert P. J. Day [Sun, 4 Mar 2007 18:17:43 +0000]
ACPI: Kconfig: hide ACPI menu when CONFIG_PM=n

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoACPI: video: Fix spelling and grammar mistakes
Julius Volz [Tue, 20 Feb 2007 15:38:40 +0000]
ACPI: video: Fix spelling and grammar mistakes

Correct some of the most obvious spelling and grammar
mistakes in drivers/acpi/video.c (comments and printk output).

Signed-off-by: Julius Volz <juliusrv@gmail.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoACPI: make blacklist more verbose
Anthony Godshall, Ampro Computers, Inc [Sat, 10 Mar 2007 02:19:05 +0000]
ACPI: make blacklist more verbose

IMHO, ACPI disabled due to DMI failure or blacklisted year should be noted,
as is done with other ACPI blacklisting.

This will help people troubleshoot when ACPI isn't working.  Status quo is
a mysterious "ACPI Disabled" message without explanation on BIOS that
implements ACPI but not DMI.  This is actually fairly common on embedded
x86 boards.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoasus-laptop: make code static
Adrian Bunk [Tue, 20 Feb 2007 00:07:25 +0000]
asus-laptop: make code static

This patch makes some needlessly global code static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years ago[IPV6] fix ipv6_getsockopt_sticky copy_to_user leak
Chris Wright [Sat, 10 Mar 2007 00:19:17 +0000]
[IPV6] fix ipv6_getsockopt_sticky copy_to_user leak

User supplied len < 0 can cause leak of kernel memory.
Use unsigned compare instead.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years agopci: fix section mismatch warning
Sam Ravnborg [Fri, 2 Mar 2007 22:59:04 +0000]
pci: fix section mismatch warning

drivers/pci/search.c caused following section mismatch warning
(if compiled with CONFIG_HOTPLUG=n):

WARNING: drivers/pci/built-in.o - Section mismatch: reference to .init.text: from .text.pci_find_bus after 'pci_find_bus' (at offset 0x24)

This was due to pci_find_bus() calling a function marked __devinit.
Fix was to remove the __devinit from the offending function.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPCI: aer: fix section mismatch warning
Sam Ravnborg [Tue, 27 Feb 2007 09:22:00 +0000]
PCI: aer: fix section mismatch warning

Fix following section mismatch warning (when compiled with CONFIG_HOTPLUG=n):
WARNING: drivers/pci/built-in.o - Section mismatch: reference to .init.text:aer_probe from .data between 'aerdrv' (at offset 0x1608) and 'aer_error_handlers'

Warning was fixed by renaming aerdrv to aerdriver so we pass the whitelist.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agopcie: fix section mismatch warning
Sam Ravnborg [Tue, 27 Feb 2007 09:19:17 +0000]
pcie: fix section mismatch warning

Fix following section mismatch warning (when compiled with CONFIG_HOTPLUG=n):
WARNING: drivers/pci/built-in.o - Section mismatch: reference to .init.text:pcie_portdrv_probe from .data between 'pcie_portdrv' (at offset 0xe40) and 'pcie_portdrv_err_handler'

This warning was fixed by renaming pcie_portdrv to pcie_portdriver so we pass
the whitelist.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoPCI: allow multiple calls to pcim_pin_device()
Tejun Heo [Sun, 25 Feb 2007 12:36:01 +0000]
PCI: allow multiple calls to pcim_pin_device()

Sanity check in pcim_pin_device() was too restrictive in that it didn't
allow multiple calls to the function, which is against the devres
philosohpy of fire-and-forget.  Track pinned status separately and allow
pinning multiple times.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agokobject: new_device->kref wasn't putted after error in kobject_move()
Dmitriy Monakhov [Sat, 3 Mar 2007 13:11:21 +0000]
kobject: new_device->kref wasn't putted after error in kobject_move()

If error happen we jump to "out" label, in this case new_device not yet
became the parent but it wasn't putted.

Signed-off-by: Monakhov Dmitriy <dmonakhov@openvz.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agodriver core: export device_rename
Johannes Berg [Wed, 28 Feb 2007 11:38:31 +0000]
driver core: export device_rename

In wireless we'd like to allow renaming of the phy devices we surface in
sysfs. The base wireless code, however, can be built modular and thus we
need device_rename exported.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoRemove devfs from MAINTAINERS
Jörn Engel [Tue, 27 Feb 2007 21:38:30 +0000]
Remove devfs from MAINTAINERS

Remove last remaining trace of devfs.

Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoDriver core: add device symlink back to sysfs
Greg Kroah-Hartman [Tue, 6 Mar 2007 20:55:53 +0000]
Driver core: add device symlink back to sysfs

This moves the device symlink back to sysfs even if
CONFIG_SYSFS_DEPRECATED is enabled as too many userspace programs (well,
HAL), still rely on this link to be present.

I will rework the ability for sysfs to change layouts like this in the
future, but for now, this patch should fix people's network connections.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Matt Mackall <mpm@selenic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agoRevert "driver core: refcounting fix"
Greg Kroah-Hartman [Fri, 9 Mar 2007 23:25:04 +0000]
Revert "driver core: refcounting fix"

This reverts commit 63ce18cfe685115ff8d341bae4c9204a79043cf0.

It was the incorrect fix and causes a reference counting bug whenever
any driver module is removed from the system. Mike Galbraith
<efault@gmx.de> is looking for the real fix for his problem.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

12 years agolibata-acpi: allow _GTF on SATA, but disable on PATA for now
Kristen Accardi [Fri, 9 Mar 2007 23:15:33 +0000]
libata-acpi: allow _GTF on SATA, but disable on PATA for now

The ACPI specification states, and BIOS implementations depend on,
_STM being called before _GTF.

SATA does this, but PATA does not.  So for now, simply
prevent execution of _GTF on PATA devices.  Longer term we
should implement ACPI support for PATA devices in libata.

Signed-off-by: Kristen Accardi <kristen.c.accardi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years ago[POWERPC] update cell_defconfig
Arnd Bergmann [Fri, 9 Mar 2007 23:05:39 +0000]
[POWERPC] update cell_defconfig

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

12 years ago[POWERPC] ps3: always make sure were running on a PS3
Geert Uytterhoeven [Fri, 9 Mar 2007 23:05:38 +0000]
[POWERPC] ps3: always make sure were running on a PS3

Add missing checks to PS3 specific drivers ps3av and sys-manager to verify that
we are actually running on a PS3 (pointed out by Arnd).

Correct existing checks in other subsystems/drivers to return -ENODEV instead
of zero.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

12 years ago[POWERPC] Fix spu SLB invalidations
Benjamin Herrenschmidt [Fri, 9 Mar 2007 23:05:37 +0000]
[POWERPC] Fix spu SLB invalidations

The SPU code doesn't properly invalidate SPUs SLBs when necessary,
for example when changing a segment size from the hugetlbfs code. In
addition, it saves and restores the SLB content on context switches
which makes it harder to properly handle those invalidations.

This patch removes the saving & restoring for now, something more
efficient might be found later on. It also adds a spu_flush_all_slbs(mm)
that can be used by the core mm code to flush the SLBs of all SPEs that
are running a given mm at the time of the flush.

In order to do that, it adds a spinlock to the list of all SPEs and move
some bits & pieces from spufs to spu_base.c

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

12 years ago[POWERPC] avoid SPU_ACTIVATE_NOWAKE optimization
Christoph Hellwig [Fri, 9 Mar 2007 23:05:36 +0000]
[POWERPC] avoid SPU_ACTIVATE_NOWAKE optimization

This optimization was added recently but is still buggy,
so back it out for now.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>

12 years ago[POWERPC] spufs: fix possible memory corruption is spufs_mem_write
Arnd Bergmann [Fri, 9 Mar 2007 23:05:35 +0000]
[POWERPC] spufs: fix possible memory corruption is spufs_mem_write

Due to a buggy unsigned comparison, it was possible to write
beyond the end of the local store file in spufs under some
circumstances.

This rewrites the buggy function to look more like
simple_copy_from_buffer.

Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
Cc: Ulrich Weigand <Ulrich.Weigand@de.ibm.com>

12 years agoMerge branch 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc
Linus Torvalds [Fri, 9 Mar 2007 22:22:35 +0000]
Merge branch 'merge' of /linux/kernel/git/paulus/powerpc

* 'merge' of master.kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc:
  [POWERPC] 85xx: Enable CONFIG_SERIAL_8250_SHARE_IRQ
  [POWERPC] Select u-image as default image for Linkstation
  [POWERPC] 83xx: Minor fixes for 834x_mds USB setup code
  [POWERPC] Fix warning in powermac pci.c
  [POWERPC] Fix warning in powermac feature.c
  [POWERPC] Fix warning in prom_parse.c of_irq_map_oldworld()
  [POWERPC] Celleb: bug fix caused by not casting pointer types
  [POWERPC] Add missing newline in xmon help output
  [POWERPC] No DEEPNAP on 970MP 1.0

12 years ago[IPV6]: Fix for ipv6_setsockopt NULL dereference
Olaf Kirch [Fri, 9 Mar 2007 21:55:38 +0000]
[IPV6]: Fix for ipv6_setsockopt NULL dereference

I came across this bug in http://bugzilla.kernel.org/show_bug.cgi?id=8155

Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com>
Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[DCCP]: Initialise write_xmit_timer also on passive sockets
Gerrit Renker [Fri, 9 Mar 2007 21:47:58 +0000]
[DCCP]: Initialise write_xmit_timer also on passive sockets

The TX CCID needs the write_xmit_timer for delaying packet sends. Previously
this timer was only activated on active (connecting) sockets.

This patch initialises the write_xmit_timer in sync with the other timers, i.e.
the timer will be ready on any socket. This is used by applications with a
listening socket which start to stream after receiving an initiation by the
client.  The write_xmit_timer is stopped when the application closes, as before.

Was tested to work and to remove the timer bug reported on dccp@vger.

Also moved timer initialisation into timer.c (static).

Signed-off-by: Gerrit Renker <gerrit@erg.abdn.ac.uk>
Acked-by: Ian McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[IPV4]: Fix rtm_to_ifaddr() error handling.
Evgeniy Polyakov [Fri, 9 Mar 2007 21:43:24 +0000]
[IPV4]: Fix rtm_to_ifaddr() error handling.

Return negative error value (embedded in the pointer) instead of
returning NULL.

Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

12 years ago[MIPS] Sibyte: Fix ZBbus profiler
Ralf Baechle [Fri, 9 Mar 2007 15:59:56 +0000]
[MIPS] Sibyte: Fix ZBbus profiler

 o Fix build error.
 o Handle error returns.
 o Deal with signals received while sleeping.
 o Don't allow to be selected when we're not building the directory with
   the driver anyway.
 o Coding style cleanups.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years ago[MIPS] Sibyte: Do not allow enabling LDT support if PCI is disabled.
Ralf Baechle [Fri, 9 Mar 2007 12:17:32 +0000]
[MIPS] Sibyte: Do not allow enabling LDT support if PCI is disabled.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

12 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Fri, 9 Mar 2007 18:38:09 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] DEC: Remove call to register_prom_console.