7 years agoarm: tegra: use rfkill-gpio driver to register bluetooth rfkill
Nagarjuna Kristam [Mon, 4 Jun 2012 04:30:53 +0000]
arm: tegra: use rfkill-gpio driver to register bluetooth rfkill

rfkill-gpio driver is available in linux delivery as a generic rfkill driver.
use rfkill-gpio driver to perform bluetooth RFKILL gpio activities, instead of
bcm4329 rfkill driver.

Bug 993990
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>

Change-Id: I654b93f099431029177913605d15ad921df07833
Reviewed-on: http://git-master/r/108499
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agoARM: config for PCIe framework
Vidya Sagar [Tue, 19 Jun 2012 09:34:16 +0000]
ARM: config for PCIe framework

Bug 815499

Change-Id: I6ce9a2bb4afbfd797fc5a0bf0d1027bdc0c1459d
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Reviewed-on: http://git-master/r/109745
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>

7 years agospi: tegra: check tx queue before start transfer
Ashwini Ghuge [Wed, 20 Jun 2012 08:34:49 +0000]
spi: tegra: check tx queue before start transfer

Check for valid entry on the message queue before
reading the transfer list from queue. If queue is
empty then do not start transfer.

Change-Id: If51a816780ab76700a7a1d7d8a025a3544590ad1
Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com>
Reviewed-on: http://git-master/r/109469
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agospi: tegra: dump registers when error occurs
Ashwini Ghuge [Wed, 20 Jun 2012 08:22:45 +0000]
spi: tegra: dump registers when error occurs

When any error occurs in spi communication,
dump the spi registers for debug purpose

Change-Id: I5cf226d4b504c95a6abb8dcf5b8c0ba1ef44271c
Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com>
Reviewed-on: http://git-master/r/109466
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agospi: tegra: Max tx words limited to max buff size
Ashwini Ghuge [Wed, 20 Jun 2012 08:44:28 +0000]
spi: tegra: Max tx words limited to max buff size

When computing required words for a transfer,
limit this to max possible size on given
sub transfer

Change-Id: Ia1a9290ae389e36ecb5a8d03be2982885a544a33
Signed-off-by: Ashwini Ghuge <aghuge@nvidia.com>
Reviewed-on: http://git-master/r/109462
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agospi: tegra: do not start transfer if runtime pm fails to resume
Johnny Qiu [Mon, 18 Jun 2012 07:11:23 +0000]
spi: tegra: do not start transfer if runtime pm fails to resume

Bug 995706

During device shutdown/rebooting, runtime PM is disabled. SPI bus
driver will fail to call tegra_spi_runtime_resume() to resume the
clock needed by tranferring. In this case, do not start transferring.

Change-Id: I42cc0763f55b6c90df00fbad68794939e903199a
Signed-off-by: Johnny Qiu <joqiu@nvidia.com>
Reviewed-on: http://git-master/r/109458
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>

7 years agovideo: tegra: dc: fix MC_DECERR display0_win errors on shutdown
Adam Cheney [Sat, 16 Jun 2012 02:22:35 +0000]
video: tegra: dc: fix MC_DECERR display0_win errors on shutdown

When a DC window is being released, a NULL flip is used to indicate
that the window should be disabled.  To disable a window, 0 is
written to WIN_OPTIONS.

The MC_DECERR on window shutdown is a symptom of forgetting step 2)
below when disabling windows, leaving no indication that there is
anything to wait for.  This causes DC to erroneously unpin the
scanout buffer while the buffer is still actively being used.

Summary of flip (window update) synchronization in DC:
1) program some window registers
2) set win->dirty=1
3) schedule the activation of the registers
4) request VBLANK or HBLANK interrupts
5) wait for win->dirty==0

In the trigger_windows ISR (every VBLANK or HBLANK):
1) if there is no window update pending in HW, clear dirty flag to
   indicate that ACTIVE registers are up-to-date.

bug 991572
bug 995614
bug 989119
bug 983251
bug 960424
bug 866711

Change-Id: I8b710aac874b202838c3989608b7e0bd15425382
Signed-off-by: Adam Cheney <acheney@nvidia.com>
Reviewed-on: http://git-master/r/109370
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Robert Morell <rmorell@nvidia.com>
Reviewed-by: Nirav Patel <nipatel@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>

7 years agomedia: tegra: avp: Remove compiler warning
Juha Tukkinen [Mon, 18 Jun 2012 13:11:43 +0000]
media: tegra: avp: Remove compiler warning

Get rid of maybe-uninitialized warning when using 4.6 toolchain.

Bug 999222

Change-Id: Ic8e944eaba281cdea45950b61f93093ff0e59f20
Signed-off-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-on: http://git-master/r/109553
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Stefan Becker <stefanb@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>

7 years agoarm: tegra: emc: Fix compiler warning
Juha Tukkinen [Mon, 18 Jun 2012 11:29:01 +0000]
arm: tegra: emc: Fix compiler warning

Initialize a variable to avoid a compiler warning and a potential bug.

Bug 999222

Change-Id: I77724b21d20049340943856c8d00af5e067c206a
Signed-off-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-on: http://git-master/r/109552
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Stefan Becker <stefanb@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>

7 years agovideo: tegra: host: Support per Soc hardware headers
Terje Bergstrom [Fri, 8 Jun 2012 08:40:27 +0000]
video: tegra: host: Support per Soc hardware headers

Make all chip specific functions static. Include the chip specific
functions in SoC files after including the hardware headers. This
makes the chip specific functions to be compiled per SoC, and with
the correct hardware definitions.

Bug 982965

Change-Id: I4774d4dc351951cb886d9d4da66cf021f3f0121e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/107581
Reviewed-by: Automatic_Commit_Validation_User

7 years agoarm: Tegra: Harmony: highspeed uart enable
Ramalingam C [Thu, 7 Jun 2012 09:42:24 +0000]
arm: Tegra: Harmony: highspeed uart enable

Based on the kernel command line argument, this change will register the
UARTD for the tegra_uart driver, instead of the serial8250. Hence we can
put the harmony for the UART automation test.

Bug 991545

Change-Id: I5e637c73f4ce352fb615453121d14e2874e51a53
Signed-off-by: Ramalingam C <ramalingamc@nvidia.com>
Reviewed-on: http://git-master/r/106755
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mursalin Akon <makon@nvidia.com>
GVS: Gerrit_Virtual_Submit
Reviewed-by: Laxman Dewangan <ldewangan@nvidia.com>

7 years agoarm: tegra: Fix cpu governor change issue
Puneet Saxena [Wed, 30 May 2012 10:58:31 +0000]
arm: tegra: Fix cpu governor change issue

It fixes the issue where cpu governor change
was inconsistent across platforms.

In T2x, AUTO HOTPLUG is disabled therefore we need
to store/restore gov for all online cpus across
LP0 cycle.

In T3x, AUTO HOTPLUG is enabled therefore storing/restoring
gov for Cpu0 across LP0 cycle. Cpu0 remains online in suspend
and resume.

bug 991081

Change-Id: I167654aa21e4832b3fdc40e3d388a4d3f984632b
Signed-off-by: Puneet Saxena <puneets@nvidia.com>
Reviewed-on: http://git-master/r/105404
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agommc: core: adding new sysfs entry for prod_rev
Vishal Singh [Fri, 18 May 2012 13:33:11 +0000]
mmc: core: adding new sysfs entry for prod_rev

Adding new sysfs entry for product revision which is needed by
mNAND health and status user space tool.

Bug 974823.

Change-Id: I4a07a5e6c1c81e2b7a4c1ed024e987e06f9f87c8
Signed-off-by: Vishal Singh <vissingh@nvidia.com>
Reviewed-on: http://git-master/r/103366
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Sandeep Trasi <strasi@nvidia.com>
Reviewed-by: Luis Dib <ldib@nvidia.com>
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Pavan Kunapuli <pkunapuli@nvidia.com>

7 years agovideo: tegra: host: Give names to chip_support parts
Terje Bergstrom [Fri, 15 Jun 2012 04:48:17 +0000]
video: tegra: host: Give names to chip_support parts

Give names to the structures inside nvhost_chip_support. This way
they can be referred to individually.

Change-Id: I9b727bfc232d11957a8bd3e3570583d47cff778e
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/109103
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-by: Ken Adams <kadams@nvidia.com>

7 years agovideo: tegra: host: Remove unused functions
Terje Bergstrom [Fri, 15 Jun 2012 04:45:44 +0000]
video: tegra: host: Remove unused functions

Remove unused functions in CDMA and debug. They were left unused
when debug dump started using sync queue instead of channel
registers for detecting current position.

Change-Id: Ib1f0bc8f702667d0453079e6d5f5d8ca08f8db09
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/109102
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-by: Ken Adams <kadams@nvidia.com>

7 years agovideo: tegra: host: Use chip_ops for save context
Terje Bergstrom [Fri, 15 Jun 2012 04:43:07 +0000]
video: tegra: host: Use chip_ops for save context

Call drain fifo and save context functions via nvhost_chip_support.
Earlier client drivers called into host1x code directly, which
makes each client driver SoC specific.

Change-Id: I4f805abad21012e59e11bf6a98fa46441c71c51a
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/109101
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-by: Ken Adams <kadams@nvidia.com>

7 years agoARM: tegra: dvfs: Fix error checking of voltage
Juha Tukkinen [Thu, 14 Jun 2012 14:44:34 +0000]
ARM: tegra: dvfs: Fix error checking of voltage

Fix error checking of predicted voltage. Also get rid of
maybe-uninitialized warning when using 4.6 toolchain.

Bug 949219
Bug 999222

Change-Id: I47553aba5a93c91bdd93cbf75081d69f92aec4dd
Signed-off-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-on: http://git-master/r/108899
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agovideo: tegra: host: expose power management paramters via sysfs
Mayuresh Kulkarni [Tue, 12 Jun 2012 12:52:26 +0000]
video: tegra: host: expose power management paramters via sysfs

this commit exposes following power management parameter through
sysfs:
- clockgate_delay: delay after which module is clock gated after
it goes idle. this read/write attribute & unit is ms.
- powergate_delay: delay after which module is power gated after
it is clock gated. this is read/write attribute & unit is ms.
- refcount: current reference count on the module. this is
read-only attribute.

path is: /sys/devices/host1x/<device-name>/acm/ where
<device-name> = name of device node like gr2d or gr3d etc

Bug 845598

Change-Id: I6011eb90ee85b5fc576320272e657ce31f9e264d
Signed-off-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-on: http://git-master/r/108827
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Francis Hart <fhart@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>

7 years agousb: tegra: otg: fix unbalanced suspend/resume
Xin Xie [Wed, 13 Jun 2012 01:23:31 +0000]
usb: tegra: otg: fix unbalanced suspend/resume

Becasue of a previous workaround, suspend/resume pair is implemented as
suspend/complete pair in the driver's dev_pm_ops field.

If any driver suspend routine (which is called before otg suspend)
failed, then tegra_otg_resume() will be called even tegra_otg_suspend()
is not called. This will cause disable the OTG clock, and OTG will not
generate any more IRQ.

Ideal fix would be use suspend/resume pair to implement the dev_pm_ops,
but this might break previous workaround. This patch check suspend()
routine is called or not in the resume routine; even we use suspend/
resume pair in the future, it will not cause bad behaviour.

BUG 999759

Change-Id: I88f9c28bb76c5ff9e32917904017f291456cb933
Signed-off-by: Xin Xie <xxie@nvidia.com>
Reviewed-on: http://git-master/r/108444
(cherry picked from commit c751aeea65f126d8e2df7f8a9ba02a631f958dc1)
Reviewed-on: http://git-master/r/108945
Reviewed-by: Lokesh Pathak <lpathak@nvidia.com>
Tested-by: Lokesh Pathak <lpathak@nvidia.com>

7 years agoiio: light: fix error handling for LTR558
Shridhar Rasal [Fri, 15 Jun 2012 09:13:33 +0000]
iio: light: fix error handling for LTR558

Change-Id: I34748241728bb0bab1861f8abacffdfe2939740f
Signed-off-by: Shridhar Rasal <srasal@nvidia.com>
Reviewed-on: http://git-master/r/109158
Reviewed-by: Sachin Nikam <snikam@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User

7 years agoUSB: tegra: otg: Enable host by default
Krishna Yarlagadda [Wed, 13 Jun 2012 12:50:16 +0000]
USB: tegra: otg: Enable host by default

Host support should be disabled only when there is platform
data specifying proper setting.

Bug 998001

Change-Id: I99ff534074dd7ebbf12b53dcf53d6286925965d2
Signed-off-by: Krishna Yarlagadda <kyarlagadda@nvidia.com>
Reviewed-on: http://git-master/r/108760
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Venkat Moganty <vmoganty@nvidia.com>

7 years agoMerge remote-tracking branch 'origin/dev/omp_bcmdhd_update_5_90_195_61' into promotio...
varun colbert [Fri, 15 Jun 2012 19:33:09 +0000]
Merge remote-tracking branch 'origin/dev/omp_bcmdhd_update_5_90_195_61' into promotion_build

7 years agosound: soc: tegra: fix compilation errors
Rhyland Klein [Wed, 30 May 2012 18:34:47 +0000]
sound: soc: tegra: fix compilation errors

Several compilation errors popped up when building the 3.1 kernel for
chrome. Warnings included callback structure changing and not being
updated in the max98095 codec driver and unused labels.

With these change I am able to compile in the max98095 codec support
and wm8903 without build errors.

Bug 986933

Change-Id: Ia8b2511f54b031eadcad8c74efa88be9288f25fb
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
Reviewed-on: http://git-master/r/105464
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Scott Peterson <speterson@nvidia.com>

7 years agoarm: tegra: configs: enable CONFIG_TUN
Om Prakash Singh [Thu, 14 Jun 2012 06:09:23 +0000]
arm: tegra: configs: enable CONFIG_TUN

Bug 997101
Signed-off-by: Om Prakash Singh <omp@nvidia.com>

Change-Id: I5da0bfe342193d93e021eb9a24aacb09bf38e6a0
Reviewed-on: http://git-master/r/108780
Reviewed-by: Om Prakash Singh <omp@nvidia.com>
Tested-by: Om Prakash Singh <omp@nvidia.com>
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Rakesh Kumar <krakesh@nvidia.com>
Reviewed-by: Bharat Nihalani <bnihalani@nvidia.com>

7 years agoarm: tegra: usb_phy: disable all interrupt for 2ls
BH Hsieh [Wed, 13 Jun 2012 12:14:57 +0000]
arm: tegra: usb_phy: disable all interrupt for 2ls

Disable all interrupts on current CPU
while doing 2ls to make sure the 3 us
delay being executed precisely

bug 944998

Change-Id: I645709ffdd2481a63223272e1b3f7f1f78466236
Reviewed-on: http://git-master/r/108536
Reviewed-by: Varun Colbert <vcolbert@nvidia.com>
Tested-by: Varun Colbert <vcolbert@nvidia.com>

7 years agoarm: tegra: xmm: removing L3 state transition
Vinayak Pane [Thu, 17 May 2012 01:45:02 +0000]
arm: tegra: xmm: removing L3 state transition

Remove L3 state from xmm power driver. New usb phy code
allows pm state transition L0->L2 and L2->L0. When the
system goes in LP0/LP1 suspend then the modem power
state is kept at L2 and bus state in suspend controlled by
PMC. At system resume the hsic bus is given back to USB.

Bug 991709

Change-Id: Ib3b74d7da30a5103eddd747726ac7c4423472c76
Signed-off-by: Vinayak Pane <vpane@nvidia.com>
Reviewed-on: http://git-master/r/108076
Reviewed-by: Michael Hsu <mhsu@nvidia.com>
Reviewed-by: Steve Lin <stlin@nvidia.com>

7 years agousb: serial: baseband_usb_chr kernel panic
pyu [Thu, 7 Jun 2012 14:55:39 +0000]
usb: serial: baseband_usb_chr kernel panic

Two threads race for two resources when baseband_usb_close()
get called from a user process

Bug 988188

Change-Id: Ic962640b6414e576d34b7ff6870b21b644837434
Signed-off-by: pyu <pyu@nvidia.com>
Reviewed-on: http://git-master/r/107088
GVS: Gerrit_Virtual_Submit
Reviewed-by: Vinayak Pane <vpane@nvidia.com>
Reviewed-by: Steve Lin <stlin@nvidia.com>

7 years agoarm: tegra: configs: enable CFG80211
Om Prakash Singh [Thu, 14 Jun 2012 13:53:27 +0000]
arm: tegra: configs: enable CFG80211

Bug 999876
Change-Id: I174d6d7495454f4b28f0315513d6f703743f832d
Signed-off-by: Om Prakash Singh <omp@nvidia.com>

7 years agoarm: tegra: configs: enable DHD_ENABLE_P2P
Om Prakash Singh [Thu, 14 Jun 2012 13:52:38 +0000]
arm: tegra: configs: enable DHD_ENABLE_P2P

Bug 999876
Change-Id: I174d6d7495454f4b28f0315513d6f703743f832d
Signed-off-by: Om Prakash Singh <omp@nvidia.com>

7 years agonet: wireless: bcmdhd: fix Makefile and Kconfig
Om Prakash Singh [Thu, 14 Jun 2012 09:51:19 +0000]
net: wireless: bcmdhd: fix Makefile and Kconfig

Bug 999876

Change-Id: I83a139e6c0dd42cf095fa2ac1376732075a15434

7 years agocfg80211: fix a crash in nl80211_send_station
Felix Fietkau [Thu, 11 Aug 2011 01:00:33 +0000]
cfg80211: fix a crash in nl80211_send_station

mac80211 leaves sinfo->assoc_req_ies uninitialized, causing a random
pointer memory access in nl80211_send_station.
Instead of checking if the pointer is null, use sinfo->filled, like
the rest of the fields.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agonet: wireless: bcmdhd: Fix P2P driver crash for MFG firmware
Leslie Yu [Tue, 29 May 2012 22:18:17 +0000]
net: wireless: bcmdhd: Fix P2P driver crash for MFG firmware

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Make responce waiting uninterruptible
Dmitry Shmidt [Tue, 29 May 2012 22:05:33 +0000]
net: wireless: bcmdhd: Make responce waiting uninterruptible

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix WPS PBC overlap failure
Neeraj Kumar Garg [Thu, 24 May 2012 19:19:18 +0000]
net: wireless: bcmdhd: Fix WPS PBC overlap failure

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Ignore signal_pending() while waiting in IOCTL
Dmitry Shmidt [Wed, 16 May 2012 23:50:06 +0000]
net: wireless: bcmdhd: Ignore signal_pending() while waiting in IOCTL

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Check return value from dhd_dev_init_ioctl()
Dmitry Shmidt [Wed, 16 May 2012 18:26:24 +0000]
net: wireless: bcmdhd: Check return value from dhd_dev_init_ioctl()

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix WARN_ON(!res->pub.channel)
Dmitry Shmidt [Tue, 15 May 2012 20:20:25 +0000]
net: wireless: bcmdhd: Fix WARN_ON(!res->pub.channel)

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Change singal pending return value from -110 to -4
Dmitry Shmidt [Tue, 15 May 2012 19:22:48 +0000]
net: wireless: bcmdhd: Change singal pending return value from -110 to -4

- ETIMEDOUT is interpreted as FW is not responding,
  so return EINTR instead

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix filtering setting in case of P2P
Dmitry Shmidt [Thu, 10 May 2012 20:20:40 +0000]
net: wireless: bcmdhd: Fix filtering setting in case of P2P

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Avoid turning radio UP twice on start
Dmitry Shmidt [Thu, 3 May 2012 17:34:15 +0000]
net: wireless: bcmdhd: Avoid turning radio UP twice on start

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Set MMC_PM_KEEP_POWER flag on suspend
Dmitry Shmidt [Wed, 2 May 2012 21:25:59 +0000]
net: wireless: bcmdhd: Set MMC_PM_KEEP_POWER flag on suspend

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.61
Dmitry Shmidt [Tue, 1 May 2012 18:00:21 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.61

- Deauth frame from p2p GO to client doesn't go from firmware
  if we do del_virtual_iface immediately. Putting a delay after
  sending deauth frame to allowed FW to send out deauth frame.
- IF_DEL operation was timing out due to wrong status check.
  Fixed it and added few debug prints.
- Sending Provision Discovery directly to GO instead of doing
  an internal scan. Also put the internal scan count to 3 to have
  better timings for GO-NEG.
- Increase beacon timeout only for concurrent mode. For STA only
  operation, use the default beacon timeout value (4).
- If scan abort is due to timeout, aborting the scan in FW is not
  required. Moreover, as this scan_timeout call is coming in timer
  interrupt context, all blocking calls such as fw scan abort will
  result in kernel panic : don’t call abort in Firmware.
- Add p2p_cancel_listen routine. Fix p2p_listen_complete related
  kernel crash seen while turning off WiFi.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Turn OFF wlan power if interface UP fails
Dmitry Shmidt [Mon, 30 Apr 2012 23:34:01 +0000]
net: wireless: bcmdhd: Turn OFF wlan power if interface UP fails

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Allow 80211_HT capability
Dmitry Shmidt [Thu, 12 Apr 2012 20:48:46 +0000]
net: wireless: bcmdhd: Allow 80211_HT capability

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix improper band handling
Dmitry Shmidt [Tue, 10 Apr 2012 22:44:41 +0000]
net: wireless: bcmdhd: Fix improper band handling

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to version 5.90.195.53
Dmitry Shmidt [Thu, 5 Apr 2012 21:49:13 +0000]
net: wireless: bcmdhd: Update to version 5.90.195.53

- Add retry to wl_cfg80211_mgmt_tx() for P2P
- Change singal pending return value from -512 to -110
- Minor cleaning

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Move FW hang processign to work queue
Dmitry Shmidt [Mon, 2 Apr 2012 17:27:13 +0000]
net: wireless: bcmdhd: Move FW hang processign to work queue

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix FW hang recovery
Dmitry Shmidt [Mon, 2 Apr 2012 17:23:59 +0000]
net: wireless: bcmdhd: Fix FW hang recovery

- Reduce IOCTL responce timeout to 2 sec (from 20)
- Fix pending status in case of timeout
- Pass error code from dhd_is_associated() call
- Call cfg80211_disconnected() if no timeout detected

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix frame sequence lag issue
Andrey Smolnikov [Mon, 2 Apr 2012 17:19:30 +0000]
net: wireless: bcmdhd: Fix frame sequence lag issue

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix crash in dhd_preinit_ioctls() band set
Dmitry Shmidt [Thu, 29 Mar 2012 19:10:36 +0000]
net: wireless: bcmdhd: Fix crash in dhd_preinit_ioctls() band set

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add CONFIG_DHD_ENABLE_P2P Kconfig option
Dmitry Shmidt [Thu, 29 Mar 2012 19:09:23 +0000]
net: wireless: bcmdhd: Add CONFIG_DHD_ENABLE_P2P Kconfig option

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Turn off DHD_USE_EARLYSUSPEND option
Dmitry Shmidt [Tue, 27 Mar 2012 20:45:55 +0000]
net: wireless: bcmdhd: Turn off DHD_USE_EARLYSUSPEND option

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.46
Dmitry Shmidt [Mon, 26 Mar 2012 20:30:33 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.46

- Fix WEXT compilation
- Start SoftAP in G-band only
- Fix IF_DEL timeout due to wrong status check
- Fix P2P to pass certification
- Enable arpoe in concurrent mode by default
- Fail to start sched scan in P2P GO

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add 'wlan_ctrl_wake' wakelock
Dmitry Shmidt [Wed, 21 Mar 2012 19:35:56 +0000]
net: wireless: bcmdhd: Add 'wlan_ctrl_wake' wakelock

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Set probe_resp.timestamp value to scan results
Dmitry Shmidt [Wed, 21 Mar 2012 00:04:02 +0000]
net: wireless: bcmdhd: Set probe_resp.timestamp value to scan results

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add constant mDNS filter
Dmitry Shmidt [Tue, 20 Mar 2012 20:38:06 +0000]
net: wireless: bcmdhd: Add constant mDNS filter

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add WL_CFG80211_STA_EVENT config option
Dmitry Shmidt [Tue, 20 Mar 2012 20:08:13 +0000]
net: wireless: bcmdhd: Add WL_CFG80211_STA_EVENT config option

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.35
Dmitry Shmidt [Thu, 15 Mar 2012 19:47:26 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.35

- Add SoftAP auto-channel support
- P2P fixes

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix mac setting from platform hook
Dmitry Shmidt [Tue, 13 Mar 2012 22:25:46 +0000]
net: wireless: bcmdhd: Fix mac setting from platform hook

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix crash on timeout in wl_notify_escan_complete
Dmitry Shmidt [Tue, 13 Mar 2012 00:33:52 +0000]
net: wireless: bcmdhd: Fix crash on timeout in wl_notify_escan_complete

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add sched-scan config option
Dmitry Shmidt [Mon, 12 Mar 2012 22:45:04 +0000]
net: wireless: bcmdhd: Add sched-scan config option

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Allow Improved suspend/resume processing on 2.6.39
Dmitry Shmidt [Mon, 5 Mar 2012 21:25:48 +0000]
net: wireless: bcmdhd: Allow Improved suspend/resume processing on 2.6.39

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Always turn Off wlan power on interface down
Dmitry Shmidt [Mon, 5 Mar 2012 18:17:06 +0000]
net: wireless: bcmdhd: Always turn Off wlan power on interface down

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add SETSUSPENDMODE command
Dmitry Shmidt [Tue, 28 Feb 2012 19:03:37 +0000]
net: wireless: bcmdhd: Add SETSUSPENDMODE command

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Minor cleaning
Dmitry Shmidt [Tue, 28 Feb 2012 18:30:59 +0000]
net: wireless: bcmdhd: Minor cleaning

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add SET_RANDOM_MAC_SOFTAP option
Dmitry Shmidt [Mon, 27 Feb 2012 23:51:56 +0000]
net: wireless: bcmdhd: Add SET_RANDOM_MAC_SOFTAP option

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.30
Dmitry Shmidt [Mon, 27 Feb 2012 22:02:51 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.30

- Fix STA features if P2P FW is in use
- Move ENABLE_P2P_INTERFACE to Makefile
- Minor fixes in PNO scan

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.28
Dmitry Shmidt [Mon, 27 Feb 2012 20:35:15 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.28

- Improve scan for p2p
- Use use_rxchain support
- Use WL_WIRELESS_EXT instead of CONFIG_WIRELESS_EXT
- Initial sched_scan support

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Turn interface down (only) in case of FW crash
Dmitry Shmidt [Thu, 23 Feb 2012 18:36:40 +0000]
net: wireless: bcmdhd: Turn interface down (only) in case of FW crash

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix driver hang when resetting
Mike J. Chen [Thu, 16 Feb 2012 05:54:57 +0000]
net: wireless: bcmdhd: Fix driver hang when resetting

bus->tx_max was not being initialized when we do a reset and
the driver is statically linked.  this led to about a 50%
chance that it would be considered an illegal value when
we send the mac address to the FW.  add code to initialize
it to a safe value until we receive the right value from the fw.

Bug: 5974574

Change-Id: I28ab25d97203ef075e5354c25f85a25daaff5594
Signed-off-by: Mike J. Chen <mjchen@google.com>
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Increase pm_notify callback priority
Dmitry Shmidt [Tue, 31 Jan 2012 19:06:23 +0000]
net: wireless: bcmdhd: Increase pm_notify callback priority

Make pm_notify callback to be called the first on suspend/resume path to
ensure it will always be called.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix crash on dhdsdio_probe_attach() failure
Dmitry Shmidt [Mon, 30 Jan 2012 23:43:31 +0000]
net: wireless: bcmdhd: Fix crash on dhdsdio_probe_attach() failure

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Daemonize wl_event_handler
Dmitry Shmidt [Mon, 30 Jan 2012 21:03:19 +0000]
net: wireless: bcmdhd: Daemonize wl_event_handler

Daemonizing makes thread (besides other things) NON-FREEZABLE, and it will not
get fake signal on suspend to quicl down_interruptible()

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.23
Dmitry Shmidt [Tue, 24 Jan 2012 21:59:40 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.23

- WFD fixes

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.22
Dmitry Shmidt [Tue, 24 Jan 2012 21:55:00 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.22

- Disable Ad-hoc support for cfg80211
- dhd_linux.c: Fix incorrect pid check
- Merge Android changes from Android tree

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.19
Dmitry Shmidt [Tue, 24 Jan 2012 21:47:47 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.19

- Add WFD changes
- Add extra locking for internal ioctl operations

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.195.15
Dmitry Shmidt [Tue, 24 Jan 2012 21:37:34 +0000]
net: wireless: bcmdhd: Update to Version 5.90.195.15

- Add WFD concurrent mode support

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add WIPHY_FLAG_SUPPORTS_FW_ROAM flag
Dmitry Shmidt [Mon, 23 Jan 2012 20:47:21 +0000]
net: wireless: bcmdhd: Add WIPHY_FLAG_SUPPORTS_FW_ROAM flag

Adding this flag will allow NL80211_ATTR_ROAM_SUPPORT, and will set
  WPA_DRIVER_FLAGS_BSS_SELECTION flag in wpa_supplicant

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fake PNO event to wake up the wpa_supplicant
Dmitry Shmidt [Fri, 20 Jan 2012 22:15:05 +0000]
net: wireless: bcmdhd: Fake PNO event to wake up the wpa_supplicant

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Enable wlan access on resume for all sdio functions
Dmitry Shmidt [Mon, 19 Dec 2011 18:24:09 +0000]
net: wireless: bcmdhd: Enable wlan access on resume for all sdio functions

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix P2P interface removal
Dmitry Shmidt [Fri, 16 Dec 2011 20:54:51 +0000]
net: wireless: bcmdhd: Fix P2P interface removal

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix proper scan command even if request is NULL
Dmitry Shmidt [Wed, 14 Dec 2011 01:39:48 +0000]
net: wireless: bcmdhd: Fix proper scan command even if request is NULL

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Decrease event wake_lock timeout to 1500 ms
Dmitry Shmidt [Tue, 13 Dec 2011 20:27:49 +0000]
net: wireless: bcmdhd: Decrease event wake_lock timeout to 1500 ms

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix getting arp_hostip table
Dmitry Shmidt [Mon, 12 Dec 2011 23:40:33 +0000]
net: wireless: bcmdhd: Fix getting arp_hostip table

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Allow to push more packets to FW for Tx
Dmitry Shmidt [Wed, 7 Dec 2011 00:27:37 +0000]
net: wireless: bcmdhd: Allow to push more packets to FW for Tx

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Fix scan crash in ibss mode
Dmitry Shmidt [Fri, 2 Dec 2011 21:24:01 +0000]
net: wireless: bcmdhd: Fix scan crash in ibss mode

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Add FW reloading in case of FW hang
Dmitry Shmidt [Fri, 2 Dec 2011 21:10:47 +0000]
net: wireless: bcmdhd: Add FW reloading in case of FW hang

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Update to Version 5.90.125.94.1
Dmitry Shmidt [Wed, 30 Nov 2011 20:49:02 +0000]
net: wireless: bcmdhd: Update to Version 5.90.125.94.1

- Return zeroed private command buffer
- Fix memory leak in wl_inform_single_bss()

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agonet: wireless: bcmdhd: Use CONFIG_DHD_USE_STATIC_BUF for preallocated memory
Dmitry Shmidt [Sat, 12 Nov 2011 00:04:12 +0000]
net: wireless: bcmdhd: Use CONFIG_DHD_USE_STATIC_BUF for preallocated memory

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>

7 years agovideo: tegra: host: Remove version from dev name
Terje Bergstrom [Wed, 13 Jun 2012 08:57:59 +0000]
video: tegra: host: Remove version from dev name

Remove version from nvhost_device name, and use a new field,
version, to distinguish between IP versions. This restores the
sysfs API for 3D clock scaling back to its original path.

Change-Id: I444ef728b7cab9e5ea3a08f3c7be0f1661209686
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/108501
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agomedia: video: nvavp: Add nvhost to include path
Terje Bergstrom [Tue, 12 Jun 2012 10:45:52 +0000]
media: video: nvavp: Add nvhost to include path

Add nvhost directory to #include path. This allows making dev.h a
stub in a later commit.

Bug 982965

Change-Id: I651b619422c26a5dc6766ddb381bd05c1fd9c462
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/108226
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Kaz Fukuoka <kfukuoka@nvidia.com>
Reviewed-by: Mayuresh Kulkarni <mkulkarni@nvidia.com>
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>

7 years agovideo: tegra: dc: Move #includes from dc_priv.h
Terje Bergstrom [Tue, 12 Jun 2012 10:44:15 +0000]
video: tegra: dc: Move #includes from dc_priv.h

Move #include directives for nvhost headers from dc_priv.h to the
source files that need the #includes. This allows #including
dc_priv.h without access to all nvhost headers.

Also adds nvhost to the #include path of dc to allow making dev.h a
stub in a later commit.

Bug 982965

Change-Id: Icfe7084d295f57926195b178174f81047eb01187
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/108225
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agovideo: tegra: host: Parametrize host1x
Terje Bergstrom [Wed, 30 May 2012 12:28:19 +0000]
video: tegra: host: Parametrize host1x

Add parameters in host1x nvhost_device on
* number of sync points
* number of wait bases
* number of channels
* number of mlocks
* client managed bitmask
* naming of sync points

Add automatically generated headers and use symbols from them to
access hardware.

Move host1x device definition from generic host1x to SoC specific
source files t20.c and t30.c.

Bug 982965

Change-Id: Ibec84be22d75b363900d10bcbd59d4d8321d54a1
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/104974
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>

7 years agovideo: tegra: host: Register devices in SoC files
Terje Bergstrom [Tue, 22 May 2012 12:23:13 +0000]
video: tegra: host: Register devices in SoC files

Move the device structures to the driver source code files. Register
all nvhost_device's in one loop which is called from board file.

host1x driver code is moved to live under host1x, too. This causes
a need to add host to include path of tegradc and nvavp.

Bug 982965

Change-Id: If99cf9d1ef6bc24663ee8294c19370429ed04ca7
Signed-off-by: Terje Bergstrom <tbergstrom@nvidia.com>
Reviewed-on: http://git-master/r/104076
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agomedia: video: tegra: fix compilation warning
Juha Tukkinen [Tue, 12 Jun 2012 10:32:17 +0000]
media: video: tegra: fix compilation warning

Get rid of maybe-uninitialized warning when using 4.6 toolchain.

Bug 949219
Bug 999222

Change-Id: Id7c2187cb75293515e4018cac814bd7f2ce343a9
Signed-off-by: Juha Tukkinen <jtukkinen@nvidia.com>
Reviewed-on: http://git-master/r/108218
Reviewed-by: Automatic_Commit_Validation_User
Reviewed-by: Stefan Becker <stefanb@nvidia.com>
Reviewed-by: Terje Bergstrom <tbergstrom@nvidia.com>

7 years agoARM: Tegra: Enable 900MHz at 1V on restricted pll_m
Graziano Misuraca [Fri, 18 May 2012 23:32:34 +0000]
ARM: Tegra: Enable 900MHz at 1V on restricted pll_m

Allow pll_m to reach 900MHz at 1V on T30, T33, T37
rev A02+ SKUs.

Bug 891320

Change-Id: Idbfb10014ae2a1d06abc3bc1d0bed59c583fac98
Signed-off-by: Graziano Misuraca <gmisuraca@nvidia.com>
Reviewed-on: http://git-master/r/103453
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agoARM: Tegra: cardhu: Let emc to 450MHz on T33+ at 1V
Graziano Misuraca [Fri, 11 May 2012 00:35:33 +0000]
ARM: Tegra: cardhu: Let emc to 450MHz on T33+ at 1V

Change dvfs table to allow emc to hit 450MHz at 1V VDD_CORE.
Line in emc table is also used for T30/T30s but because
those can't reach 1350mV they should never use a 450MHz
bct and therefore jump from 400@1V to 800@1.2V as before.

Bug 973238

Change-Id: I4f1f96c959658e6f9aeca8841c2bfa86fe20cfb8
Signed-off-by: Graziano Misuraca <gmisuraca@nvidia.com>
Reviewed-on: http://git-master/r/101868
Reviewed-by: Simone Willett <swillett@nvidia.com>
Tested-by: Simone Willett <swillett@nvidia.com>

7 years agodrivers: cpuquiet: fix error message
Peter De Schrijver [Mon, 11 Jun 2012 15:41:27 +0000]
drivers: cpuquiet: fix error message

Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>

Change-Id: If04c699e002542bd8ce4b37b2367d7ec496c284e
Reviewed-on: http://git-master/r/107959
Reviewed-by: Automatic_Commit_Validation_User
GVS: Gerrit_Virtual_Submit
Reviewed-by: Sai Gurrappadi <sgurrappadi@nvidia.com>
Tested-by: Sai Gurrappadi <sgurrappadi@nvidia.com>
Reviewed-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Tested-by: Peter De Schrijver <pdeschrijver@nvidia.com>
Reviewed-by: Matthew Longnecker <mlongnecker@nvidia.com>
Reviewed-by: Juha Tukkinen <jtukkinen@nvidia.com>

7 years agoARM: tegra: dvfs: Update Tegra3 I/O dvfs tables
Alex Frid [Sat, 9 Jun 2012 00:38:40 +0000]
ARM: tegra: dvfs: Update Tegra3 I/O dvfs tables

Updated 0.95V entries in Tegra3 dvfs tables for nand, nor, spi, and
pwm clocks with recent characterization results. Removed usb, pcie,
and spdif dvfs since characterization allows running these interfaces
in the entire supported voltage range.

Bug 817679
Bug 841336

Change-Id: Iaaa2a3ff8b3c07915f1cb05e7b14da545428888e
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/107779
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Wen Yi <wyi@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>

7 years agoARM: tegra: dvfs: Update Tegra3 display subsystem dvfs tables
Alex Frid [Fri, 8 Jun 2012 20:30:09 +0000]
ARM: tegra: dvfs: Update Tegra3 display subsystem dvfs tables

Updated 0.95V entries in Tegra3 dvfs tables for display and dsi
with recent characterization results. Removed hdmi and crt dvfs
since characterization allows running these modules at max rate
in the entire supported voltage range.

Bug 817679
Bug 841336

Change-Id: I28651a692e30a20536613460ea0e45155a530af7
Signed-off-by: Alex Frid <afrid@nvidia.com>
Reviewed-on: http://git-master/r/107778
Reviewed-by: Automatic_Commit_Validation_User
Tested-by: Wen Yi <wyi@nvidia.com>
Reviewed-by: Jon Mayo <jmayo@nvidia.com>
Reviewed-by: Yu-Huan Hsu <yhsu@nvidia.com>