8 years ago[SCSI] fusion: do not check serial_number in the abort handler
Christoph Hellwig [Mon, 4 Apr 2011 13:42:41 +0000]
[SCSI] fusion: do not check serial_number in the abort handler

The SCSI midlayer stops all command processing when in error handling, which
means there is no chance for command reuse when the abort handler is called.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] mpt2sas: do not check serial_number in the abort handler
Christoph Hellwig [Mon, 4 Apr 2011 13:42:30 +0000]
[SCSI] mpt2sas: do not check serial_number in the abort handler

The SCSI midlayer stops all command processing when in error handling, which
means there is no chance for command reuse when the abort handler is called.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] usb-storage: do not increment cmd->serial_number
Christoph Hellwig [Mon, 4 Apr 2011 13:42:22 +0000]
[SCSI] usb-storage: do not increment cmd->serial_number

The isd200 sub-driver increments the command serial number despite not
using it at all in it's routine for sending internal scsi commands.
Remove the increment to prepare for removing the serial_number field.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] remove cmd->serial_number litter
Christoph Hellwig [Mon, 4 Apr 2011 13:42:14 +0000]
[SCSI] remove cmd->serial_number litter

Stop using cmd->serial_number in printks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] fcoe: have fcoe log off and lport destroy before ndo_fcoe_disable
Vasu Dev [Fri, 1 Apr 2011 23:06:45 +0000]
[SCSI] fcoe: have fcoe log off and lport destroy before ndo_fcoe_disable

Currently fcoe interface cleanup is done after ndo_fcoe_disable
and that prevents logoff going out to the peer, so this patch
moves all netdev cleanup and its releasing inside
fcoe_interface_cleanup to have log off before ndo_fcoe_disable
disables the fcoe.

This patch also fixes asymmetric rtnl locking around fcoe_if_destroy,
as currently this function requires rtnl held by its caller
and then have this func drops the lock, instead now don't have
any processing under rtnl inside fcoe_if_destroy, this required
moving few func to get build working again.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] libfc: rec tov value and REC_TOV_CONST units usages is incorrect
Vasu Dev [Fri, 1 Apr 2011 23:06:40 +0000]
[SCSI] libfc: rec tov value and REC_TOV_CONST units usages is incorrect

Added REC_TOV_CONST intent was to have rec tov as e_d_tov + 1s
but currently it is e_d_tov + 1ms since e_d_tov is stored in ms
unit.

Also returned rec tov by get_fsp_rec_tov is in ms and this ms tov
is used as-is with fc_fcp_timer_set expecting jiffies tov.

Fixed this by having get_fsp_rec_tov return rec tov in jiffies
as e_d_tov + 1s and then use jiffies tov w/ fc_fcp_timer_set.

Also some cleanup, no need to cache get_fsp_rec_tov return value
in local rec_tov at various places.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] libfc: remove duplicate ema_list init
Vasu Dev [Fri, 1 Apr 2011 23:06:35 +0000]
[SCSI] libfc: remove duplicate ema_list init

As ema_list is already initialized by libfc_host_alloc.

Signed-off-by: Vasu Dev <vasu.dev@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] libfcoe: fix wrong comment in fcoe_transport_detach
Yi Zou [Fri, 1 Apr 2011 23:06:30 +0000]
[SCSI] libfcoe: fix wrong comment in fcoe_transport_detach

fix typo of '_attach' -> '_detach' in the comment.

Reported-by: Frank Zhang <frank_1.zhang@intel.com>
Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] libfcoe: fix possible buffer overflow in fcoe_transport_show
Yi Zou [Fri, 1 Apr 2011 23:06:25 +0000]
[SCSI] libfcoe: fix possible buffer overflow in fcoe_transport_show

possible buffer overflow in fcoe_transport_show when reaching the end of
buffer and crossing PAGE_SIZE boundary.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] libfcoe: clean up netdev mapping properly when the transport goes away
Yi Zou [Fri, 1 Apr 2011 23:06:19 +0000]
[SCSI] libfcoe: clean up netdev mapping properly when the transport goes away

When rmmoving the underlying fcoe transport driver module by force when
it's attached and in use, the correspoding netdev mapping should be
cleaned up properly as well, otherwise the lookup for a given netdev
for the transport would still return non NULL pointer, causing "unable
to handle paging request" bug.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] libfc: Move host_lock usage into ramp_up/down routines
Robert Love [Fri, 1 Apr 2011 23:06:14 +0000]
[SCSI] libfc: Move host_lock usage into ramp_up/down routines

The host_lock is still used to protect the can_queue
value in the Scsi_Host, but it doesn't need to be held
and released by each caller. This patch moves the lock
usage into the fc_fcp_can_queue_ramp_up and
fc_fcp_can_queue_ramp_down routines.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] esp, scsi_tgt_lib, fcoe: use list_move() instead of list_del()/list_add()...
Kirill A. Shutemov [Fri, 1 Apr 2011 23:06:09 +0000]
[SCSI] esp, scsi_tgt_lib, fcoe: use list_move() instead of list_del()/list_add() combination

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] fcoe: remove unnecessary module state check
Yi Zou [Fri, 1 Apr 2011 23:06:04 +0000]
[SCSI] fcoe: remove unnecessary module state check

The check of module state being MODULE_STATE_LIVE is no longer needed for the
individual fcoe transport driver, e.g., fcoe.ko, as sysfs entries now go to
libfcoe now, if it reaches fcoe.ko, it has to be already registered. The module
state check for libfcoe will guard the possible race condition of sysfs being
writable before module_init function is called and after module_exit.

Signed-off-by: Yi Zou <yi.zou@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Robert Love <robert.w.love@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] fcoe: Remove mutex_trylock/restart_syscall checks
Robert Love [Fri, 1 Apr 2011 23:05:59 +0000]
[SCSI] fcoe: Remove mutex_trylock/restart_syscall checks

These checks were initially added to avoid a lockdep
false positive when dealing with the s_active, rtnl
and fcoe_config_mutex mutexes. Recently the create,
destroy, enable and disable sysfs entries were moved
from fcoe.ko to libfcoe.ko. With this change the mutex
usage was shuffled around and the lockdep false
positive stopped happening. We can now remove these
checks.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] libfcoe: Remove mutex_trylock/restart_syscall checks
Robert Love [Fri, 1 Apr 2011 23:05:53 +0000]
[SCSI] libfcoe: Remove mutex_trylock/restart_syscall checks

This code was incorrectly ported from fcoe.c when the
fcoe transport infrastructure was put into place. It
was originally needed in fcoe.c when dealing with
the rtnl mutex. In that code it was only needed to
avoid a lockdep false positive. In libfcoe we don't
deal with the rtnl mutex, we don't get the lockdep
false positive and therefore we don't need these
checks.

Signed-off-by: Robert Love <robert.w.love@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] bnx2fc: introduce missing kfree
Julia Lawall [Fri, 1 Apr 2011 14:23:46 +0000]
[SCSI] bnx2fc: introduce missing kfree

Error handling code following a kmalloc should free the allocated data.

The semantic match that finds the problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r exists@
local idexpression x;
statement S;
expression E;
identifier f,f1,l;
position p1,p2;
expression *ptr != NULL;
@@

x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...);
...
if (x == NULL) S
<... when != x
     when != if (...) { <+...x...+> }
(
x->f1 = E
|
 (x->f1 == NULL || ...)
|
 f(...,x->f1,...)
)
...>
(
 return \(0\|<+...x...+>\|ptr\);
|
 return@p2 ...;
)

@script:python@
p1 << r.p1;
p2 << r.p2;
@@

print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] ipr: fix synchronous request flags for better performance
Wayne Boyer [Thu, 31 Mar 2011 16:56:10 +0000]
[SCSI] ipr: fix synchronous request flags for better performance

In testing it was noticed that Extended Delay after Reset flag was being set
for gscsi and volume set devices.  This had a negative effect on performance
for volume sets.  The fix is to only set the flag for gscsi devices.

Signed-off-by: Wayne Boyer <wayneb@linux.vnet.ibm.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Update version number to 8.03.07.03-k.
Madhuranath Iyengar [Wed, 30 Mar 2011 18:46:33 +0000]
[SCSI] qla2xxx: Update version number to 8.03.07.03-k.

A minor change in the versioning. We'll be attaching the "-k"
in the end.

Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Log fcport state transitions when debug messages are enabled.
Chad Dupuis [Wed, 30 Mar 2011 18:46:32 +0000]
[SCSI] qla2xxx: Log fcport state transitions when debug messages are enabled.

Add the inline function qla2x00_set_port_state() so that when a fcport state
transition happens we can log the state transition if debug messages are
enabled.

Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Verify login-state has transitioned to PRLI-completed.
Andrew Vasquez [Wed, 30 Mar 2011 18:46:31 +0000]
[SCSI] qla2xxx: Verify login-state has transitioned to PRLI-completed.

Before driver's own internal state is marked as PLOGI/PRLI
complete. This additional check closes a window seen with
dual-personality initiator/target devices where a driver's
PLOGI/PRLI request occurs within the window after the target's
PLOGI request has completed, but prior to the target's PRLI
arriving and processed by the firmware. Without this additional
check, the firmware will return port-information stating that the
port neither supports target nor initiator functions, causing the
driver to register the rport prematurely to the FC-transport
without the proper 'roles' being set.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Limit the logs in case device state does not change for ISP82xx.
Giridhar Malavali [Wed, 30 Mar 2011 18:46:30 +0000]
[SCSI] qla2xxx: Limit the logs in case device state does not change for ISP82xx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Add the ql2xdontresethba module_param.
Giridhar Malavali [Wed, 30 Mar 2011 18:46:29 +0000]
[SCSI] qla2xxx: Add the ql2xdontresethba module_param.

Also, change the ISP82xx code to only reset if this module_param is set
and reset is intended via the QLA82XX_DEV_NEED_RESET case.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Display hardware/firmware registers to get more information about...
Giridhar Malavali [Wed, 30 Mar 2011 18:46:28 +0000]
[SCSI] qla2xxx: Display hardware/firmware registers to get more information about the error for ISP82xx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Add test for valid loop id to qla2x00_relogin().
Joe Carnuccio [Wed, 30 Mar 2011 18:46:27 +0000]
[SCSI] qla2xxx: Add test for valid loop id to qla2x00_relogin().

If fabric device has invalid loop id (FC_NO_LOOP_ID) then call
qla2x00_find_new_loop_id() to attempt to obtain valid loop id.

Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Perform FCoE context reset before trying adapter reset for ISP82xx.
Giridhar Malavali [Wed, 30 Mar 2011 18:46:26 +0000]
[SCSI] qla2xxx: Perform FCoE context reset before trying adapter reset for ISP82xx.

For certain failures, try to recover first by doing FCoE context reset before
attempting big hammer approach(adpater reset).

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Remove extra call to qla82xx_check_fw_alive().
Giridhar Malavali [Wed, 30 Mar 2011 18:46:25 +0000]
[SCSI] qla2xxx: Remove extra call to qla82xx_check_fw_alive().

The stanadlone call to qla82xx_check_fw_alive() in qla82xx_watchdog()
is a typo, so remove it.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Updated the reset sequence for ISP82xx.
Giridhar Malavali [Wed, 30 Mar 2011 18:46:24 +0000]
[SCSI] qla2xxx: Updated the reset sequence for ISP82xx.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Update copyright banner.
Andrew Vasquez [Wed, 30 Mar 2011 18:46:23 +0000]
[SCSI] qla2xxx: Update copyright banner.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Update License file.
Madhuranath Iyengar [Wed, 30 Mar 2011 18:46:22 +0000]
[SCSI] qla2xxx: Update License file.

Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Free firmware PCB on logout request.
Andrew Vasquez [Wed, 30 Mar 2011 18:46:21 +0000]
[SCSI] qla2xxx: Free firmware PCB on logout request.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Include request queue ID in the upper 16-bits of the I/O handle for...
Mike Hernandez [Wed, 30 Mar 2011 18:46:20 +0000]
[SCSI] qla2xxx: Include request queue ID in the upper 16-bits of the I/O handle for Abort I/O IOCBs.

The upper 16-bits of the handle for all I/O in multi-queue supported
drivers carries the ID of the request queue it was submitted on. When
using Abort I/O IOCB, the driver needs to also populate the upper
16-bits in the handle_to_abort field so the fw can correlate with the
actual I/O.

Signed-off-by: Mike Hernandez <michael.hernandez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Remove extraneous setting of FCF_ASYNC_SENT during login-done completion.
Andrew Vasquez [Wed, 30 Mar 2011 18:46:19 +0000]
[SCSI] qla2xxx: Remove extraneous setting of FCF_ASYNC_SENT during login-done completion.

The bit is already set upon entry.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Check for a match before attempting to set FCP-priority information.
Andrew Vasquez [Wed, 30 Mar 2011 18:46:18 +0000]
[SCSI] qla2xxx: Check for a match before attempting to set FCP-priority information.

Modifying qla24xx_get_fcp_prio() to return a 'found' status
allows the driver to short circuit the 'set FCP-priority' call
and reduce the amount of noise generated in the messages file:

scsi(5): Unable to activate fcp priority,  ret=0x102
scsi(5): Unable to activate fcp priority,  ret=0x102

Also make qla24xx_get_fcp_prio() static.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Correct calling contexts of qla2x00_mark_device_lost() in async paths.
Andrew Vasquez [Wed, 30 Mar 2011 18:46:17 +0000]
[SCSI] qla2xxx: Correct calling contexts of qla2x00_mark_device_lost() in async paths.

The respective done() functions are called from process context,
so there's no reason to 'defer' the request.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] qla2xxx: Display PortID information during FCP command-status handling.
Andrew Vasquez [Wed, 30 Mar 2011 18:46:16 +0000]
[SCSI] qla2xxx: Display PortID information during FCP command-status handling.

To provide a clearer translation of the command-status origin in
relation to the midlayer's standard SCSI nexus.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: Madhuranath Iyengar <Madhu.Iyengar@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] be2iscsi: Fix for proper setting of FW
Jayamohan Kallickal [Fri, 25 Mar 2011 21:24:01 +0000]
[SCSI] be2iscsi: Fix for proper setting of FW

There was a bug in setting up type and dmsg for FW

Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] be2iscsi: check boot_kset is created before destroying it
Jayamohan Kallickal [Fri, 25 Mar 2011 21:24:00 +0000]
[SCSI] be2iscsi: check boot_kset is created before destroying it

Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] be2iscsi: Set a timeout to FW
Jayamohan Kallickal [Fri, 25 Mar 2011 21:23:59 +0000]
[SCSI] be2iscsi: Set a timeout to FW

Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] be2iscsi: Modifying Maintainer's emailid
Jayamohan Kallickal [Fri, 25 Mar 2011 21:23:58 +0000]
[SCSI] be2iscsi: Modifying Maintainer's emailid

     - Modifying Maintainer's emailid to emulex as Emulex has
acquired Serverengines

Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] be2iscsi: change in copyright notice
Jayamohan Kallickal [Fri, 25 Mar 2011 21:23:57 +0000]
[SCSI] be2iscsi: change in copyright notice

   - Modifying copyright year to 2011
   - Replacing Serverengines with Emulex as Serverengines Corp
 has been acquired by Emulex Corp

Signed-off-by: Jayamohan Kallickal <jayamohan.kallickal@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years ago[SCSI] Log thin provisioning threshold event
Shyam Iyer [Sat, 26 Feb 2011 06:59:44 +0000]
[SCSI] Log thin provisioning threshold event

At least log the message that we received a THIN PROVISIONING SOFT
THRESHOLD REACHED Unit Attention.  Also added it to unit attention
decodes.

Signed-off-by: Shyam Iyer <shyam_iyer@dell.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 15 Apr 2011 15:01:13 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: only force kblockd unplugging from the schedule() path
  block: cleanup the block plug helper functions
  block, blk-sysfs: Use the variable directly instead of a function call
  block: move queue run on unplug to kblockd
  block: kill queue_sync_plugs()
  block: readd plug trace event
  block: add callback function for unplug notification
  block: add comment on why we save and disable interrupts in flush_plug_list()
  block: fixup block IO unplug trace call
  block: remove block_unplug_timer() trace point
  block: splice plug list to local context

8 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Fri, 15 Apr 2011 14:44:22 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix compilation warnings when compiling with gcc 4.5
  UBIFS: fix oops when R/O file-system is fsync'ed

8 years agovfs: fix incorrect dentry_update_name_case() BUG_ON() test
Linus Torvalds [Fri, 15 Apr 2011 14:34:26 +0000]
vfs: fix incorrect dentry_update_name_case() BUG_ON() test

The case we should be verifying when updating the dentry name is that
the _parent_ inode (the directory) semaphore is held, not the semaphore
for the dentry itself.  It's the directory locking that rename and
readdir() etc all care about.

The comment just above even says so - but then the BUG_ON() still
checked the dentry inode itself.

Very few people noticed, because this helper function really isn't used
for very much, so you had to be using ncpfs to ever hit it.

I think I should just remove the BUG_ON (the function really has just
one user), but let's run with it fixed for a while before getting rid of
it entirely.

Reported-and-tested-by: Bongani Hlope <bonganih@bankservafrica.com>
Reported-and-tested-by: Bernd Feige <bernd.feige@uniklinik-freiburg.de>
Cc: Petr Vandrovec <petr@vandrovec.name>,
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoblock: only force kblockd unplugging from the schedule() path
Jens Axboe [Fri, 15 Apr 2011 13:49:07 +0000]
block: only force kblockd unplugging from the schedule() path

For the explicit unplugging, we'd prefer to kick things off
immediately and not pay the penalty of the latency to switch
to kblockd. So let blk_finish_plug() do the run inline, while
the implicit-on-schedule-out unplug will punt to kblockd.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: cleanup the block plug helper functions
Christoph Hellwig [Fri, 15 Apr 2011 13:20:10 +0000]
block: cleanup the block plug helper functions

It's a bit of a mess currently. task->plug is being cleared
and reset in __blk_finish_plug(), and blk_finish_plug() is
testing for a NULL plug which cannot happen even from schedule()
anymore since it uses blk_needs_flush_plug() to determine
whether to call into this function at all.

So get rid of some of the cruft.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
Linus Torvalds [Fri, 15 Apr 2011 02:03:27 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: SMP: fix cache flush loop
  Blackfin: time-ts: ack gptimer sooner to avoid missing short ints
  Blackfin: gptimers: fix thinko when disabling timers
  Blackfin: SMP: make all barriers handle cache issues

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Fri, 15 Apr 2011 02:02:55 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  libceph: fix linger request requeueing

8 years agomm/thp: use conventional format for boolean attributes
Ben Hutchings [Thu, 14 Apr 2011 22:22:21 +0000]
mm/thp: use conventional format for boolean attributes

The conventional format for boolean attributes in sysfs is numeric ("0" or
"1" followed by new-line).  Any boolean attribute can then be read and
written using a generic function.  Using the strings "yes [no]", "[yes]
no" (read), "yes" and "no" (write) will frustrate this.

[akpm@linux-foundation.org: use kstrtoul()]
[akpm@linux-foundation.org: test_bit() doesn't return 1/0, per Neil]
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Tested-by: David Rientjes <rientjes@google.com>
Cc: NeilBrown <neilb@suse.de>
Cc: <stable@kernel.org> [2.6.38.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoramfs: fix memleak on no-mmu arch
Bob Liu [Thu, 14 Apr 2011 22:22:20 +0000]
ramfs: fix memleak on no-mmu arch

On no-mmu arch, there is a memleak during shmem test.  The cause of this
memleak is ramfs_nommu_expand_for_mapping() added page refcount to 2
which makes iput() can't free that pages.

The simple test file is like this:

  int main(void)
  {
int i;
key_t k = ftok("/etc", 42);

for ( i=0; i<100; ++i) {
int id = shmget(k, 10000, 0644|IPC_CREAT);
if (id == -1) {
printf("shmget error\n");
}
if(shmctl(id, IPC_RMID, NULL ) == -1) {
printf("shm  rm error\n");
return -1;
}
}
printf("run ok...\n");
return 0;
  }

And the result:

  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        17912        42408            0            0
  -/+ buffers:              17912        42408
  root:/> shmem
  run ok...
  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        19096        41224            0            0
  -/+ buffers:              19096        41224
  root:/> shmem
  run ok...
  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        20296        40024            0            0
  -/+ buffers:              20296        40024
  ...

After this patch the test result is:(no memleak anymore)

  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        16668        43652            0            0
  -/+ buffers:              16668        43652
  root:/> shmem
  run ok...
  root:/> free
               total         used         free       shared      buffers
  Mem:         60320        16668        43652            0            0
  -/+ buffers:              16668        43652

Signed-off-by: Bob Liu <lliubbo@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoum: disable CONFIG_CMPXCHG_LOCAL
Richard Weinberger [Thu, 14 Apr 2011 22:22:18 +0000]
um: disable CONFIG_CMPXCHG_LOCAL

Commit 8a5ec0ba "Lockless (and preemptless) fastpaths for slub" makes use
of this_cpu_cmpxchg_double() which needs this_cpu_cmpxchg16b_emu() on
x86_64.  Implementing cmpxchg16b emulation for UML would introduce too
much complexity.  So just disable it.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Acked-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoum: fix call tracer and bug handler
Richard Weinberger [Thu, 14 Apr 2011 22:22:17 +0000]
um: fix call tracer and bug handler

Commit 1de1502c ("x86, um: now we can get rid of trivial uml headers")
removed accidentally bug.h which broke UML's call tracer and bug
handler.

Without asm-generic/bug.h UML uses BUG() from arch/x86/ which makes use
of ud2.  UML cannot use ud2, it raises SIGILL in user mode.  As UML has
a different stack for handling signals the call trace will be cut off.

Signed-off-by: Richard Weinberger <richard@nod.at>
Reported-by: Sergei Trofimovich <slyich@gmail.com>
Tested-by: Sergei Trofimovich <slyich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofs/fhandle.c: add <linux/personality.h> for ia64
Jeff Mahoney [Thu, 14 Apr 2011 22:22:16 +0000]
fs/fhandle.c: add <linux/personality.h> for ia64

force_o_largefile() on ia64 is defined in <asm/fcntl.h> and requires
<linux/personality.h>.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Cc: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: change mail adress of Hans J. Koch
Hans J. Koch [Thu, 14 Apr 2011 22:22:16 +0000]
MAINTAINERS: change mail adress of Hans J. Koch

My old mail address doesn't exist anymore.  This patch changes all
occurences in MAINTAINERS to my new address.

Signed-off-by: Hans J. Koch <hjk@hansjkoch.de>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoRapidIO/mpc85xx: fix possible mport registration problems
Alexandre Bounine [Thu, 14 Apr 2011 22:22:14 +0000]
RapidIO/mpc85xx: fix possible mport registration problems

Fix a possible problem with mport registration left non-cleared after
fsl_rio_setup() exits on link error.  Abort mport initialization if
registration failed.

This patch is applicable to 2.6.39-rc1 only.  The problem does not exist
for earlier versions.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: Thomas Moll <thomas.moll@sysgo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoRapidIO: add IDT CPS-1432 switch definitions
Alexandre Bounine [Thu, 14 Apr 2011 22:22:14 +0000]
RapidIO: add IDT CPS-1432 switch definitions

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agooom-kill: remove boost_dying_task_prio()
KOSAKI Motohiro [Thu, 14 Apr 2011 22:22:13 +0000]
oom-kill: remove boost_dying_task_prio()

This is an almost-revert of commit 93b43fa ("oom: give the dying task a
higher priority").

That commit dramatically improved oom killer logic when a fork-bomb
occurs.  But I've found that it has nasty corner case.  Now cpu cgroup has
strange default RT runtime.  It's 0!  That said, if a process under cpu
cgroup promote RT scheduling class, the process never run at all.

If an admin inserts a !RT process into a cpu cgroup by setting
rtruntime=0, usually it runs perfectly because a !RT task isn't affected
by the rtruntime knob.  But if it promotes an RT task via an explicit
setscheduler() syscall or an OOM, the task can't run at all.  In short,
the oom killer doesn't work at all if admins are using cpu cgroup and don't
touch the rtruntime knob.

Eventually, kernel may hang up when oom kill occur.  I and the original
author Luis agreed to disable this logic.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Luis Claudio R. Goncalves <lclaudio@uudg.org>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agovmscan: all_unreclaimable() use zone->all_unreclaimable as a name
KOSAKI Motohiro [Thu, 14 Apr 2011 22:22:12 +0000]
vmscan: all_unreclaimable() use zone->all_unreclaimable as a name

all_unreclaimable check in direct reclaim has been introduced at 2.6.19
by following commit.

2006 Sep 25; commit 408d8544; oom: use unreclaimable info

And it went through strange history. firstly, following commit broke
the logic unintentionally.

2008 Apr 29; commit a41f24ea; page allocator: smarter retry of
      costly-order allocations

Two years later, I've found obvious meaningless code fragment and
restored original intention by following commit.

2010 Jun 04; commit bb21c7ce; vmscan: fix do_try_to_free_pages()
      return value when priority==0

But, the logic didn't works when 32bit highmem system goes hibernation
and Minchan slightly changed the algorithm and fixed it .

2010 Sep 22: commit d1908362: vmscan: check all_unreclaimable
      in direct reclaim path

But, recently, Andrey Vagin found the new corner case. Look,

struct zone {
  ..
        int                     all_unreclaimable;
  ..
        unsigned long           pages_scanned;
  ..
}

zone->all_unreclaimable and zone->pages_scanned are neigher atomic
variables nor protected by lock.  Therefore zones can become a state of
zone->page_scanned=0 and zone->all_unreclaimable=1.  In this case, current
all_unreclaimable() return false even though zone->all_unreclaimabe=1.

This resulted in the kernel hanging up when executing a loop of the form

1. fork
2. mmap
3. touch memory
4. read memory
5. munmmap

as described in
http://www.gossamer-threads.com/lists/linux/kernel/1348725#1348725

Is this ignorable minor issue?  No.  Unfortunately, x86 has very small dma
zone and it become zone->all_unreclamble=1 easily.  and if it become
all_unreclaimable=1, it never restore all_unreclaimable=0.  Why?  if
all_unreclaimable=1, vmscan only try DEF_PRIORITY reclaim and
a-few-lru-pages>>DEF_PRIORITY always makes 0.  that mean no page scan at
all!

Eventually, oom-killer never works on such systems.  That said, we can't
use zone->pages_scanned for this purpose.  This patch restore
all_unreclaimable() use zone->all_unreclaimable as old.  and in addition,
to add oom_killer_disabled check to avoid reintroduce the issue of commit
d1908362 ("vmscan: check all_unreclaimable in direct reclaim path").

Reported-by: Andrey Vagin <avagin@openvz.org>
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: check that we have the right vma in __access_remote_vm()
Michael Ellerman [Thu, 14 Apr 2011 22:22:10 +0000]
mm: check that we have the right vma in __access_remote_vm()

In __access_remote_vm() we need to check that we have found the right
vma, not the following vma before we try to access it.  Otherwise we
might call the vma's access routine with an address which does not fall
inside the vma.

It was discovered on a current kernel but with an unreleased driver,
from memory it was strace leading to a kernel bad access, but it
obviously depends on what the access implementation does.

Looking at other access implementations I only see:

  $ git grep -A 5 vm_operations|grep access
  arch/powerpc/platforms/cell/spufs/file.c- .access = spufs_mem_mmap_access,
  arch/x86/pci/i386.c- .access = generic_access_phys,
  drivers/char/mem.c- .access = generic_access_phys
  fs/sysfs/bin.c- .access = bin_access,

The spufs one looks like it might behave badly given the wrong vma, it
assumes vma->vm_file->private_data is a spu_context, and looks like it
would probably blow up pretty quickly if it wasn't.

generic_access_phys() only uses the vma to check vm_flags and get the
mm, and then walks page tables using the address.  So it should bail on
the vm_flags check, or at worst let you access some other VM_IO mapping.

And bin_access() just proxies to another access implementation.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agobrk: COMPAT_BRK: fix detection of randomized brk
Jiri Kosina [Thu, 14 Apr 2011 22:22:09 +0000]
brk: COMPAT_BRK: fix detection of randomized brk

5520e89 ("brk: fix min_brk lower bound computation for COMPAT_BRK")
tried to get the whole logic of brk randomization for legacy
(libc5-based) applications finally right.

It turns out that the way to detect whether brk has actually been
randomized in the end or not introduced by that patch still doesn't work
for those binaries, as reported by Geert:

: /sbin/init from my old m68k ramdisk exists prematurely.
:
: Before the patch:
:
: | brk(0x80005c8e)                         = 0x80006000
:
: After the patch:
:
: | brk(0x80005c8e)                         = 0x80005c8e
:
: Old libc5 considers brk() to have failed if the return value is not
: identical to the requested value.

I don't like it, but currently see no better option than a bit flag in
task_struct to catch the CONFIG_COMPAT_BRK && randomize_va_space == 2
case.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/misc/sgi-gru/grufile.c: fix the wrong members of gru_chip
Wanlong Gao [Thu, 14 Apr 2011 22:22:08 +0000]
drivers/misc/sgi-gru/grufile.c: fix the wrong members of gru_chip

Fix the wrong members and the wrong function's definition, since the
irq_chip had changed.

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agotmpfs: fix off-by-one in max_blocks checks
Hugh Dickins [Thu, 14 Apr 2011 22:22:07 +0000]
tmpfs: fix off-by-one in max_blocks checks

If you fill up a tmpfs, df was showing

  tmpfs                   460800         -         -   -  /tmp

because of an off-by-one in the max_blocks checks.  Fix it so df shows

  tmpfs                   460800    460800         0 100% /tmp

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: update STABLE BRANCH info
Randy Dunlap [Thu, 14 Apr 2011 22:22:07 +0000]
MAINTAINERS: update STABLE BRANCH info

Drop Chris Wright from STABLE maintainers.  He hasn't done STABLE release
work for quite some time.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Chris Wright <chrisw@sous-sol.org>
Cc: Greg KH <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: add VM counters for transparent hugepages
Andi Kleen [Thu, 14 Apr 2011 22:22:06 +0000]
mm: add VM counters for transparent hugepages

I found it difficult to make sense of transparent huge pages without
having any counters for its actions.  Add some counters to vmstat for
allocation of transparent hugepages and fallback to smaller pages.

Optional patch, but useful for development and understanding the system.

Contains improvements from Andrea Arcangeli and Johannes Weiner

[akpm@linux-foundation.org: coding-style fixes]
[hannes@cmpxchg.org: fix vmstat_text[] entries]
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: update various tty patterns
Joe Perches [Thu, 14 Apr 2011 22:22:05 +0000]
MAINTAINERS: update various tty patterns

Commits 4a6514e6d0 ("tty: move obsolete and broken tty drivers to
drivers/staging/tty/") and a6afd9f3e8 ("tty: move a number of tty drivers
from drivers/char/ to drivers/tty/") moved files around.

Update patterns and orphan some files that were moved to staging.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: update m68knommu patterns
Joe Perches [Thu, 14 Apr 2011 22:22:04 +0000]
MAINTAINERS: update m68knommu patterns

Commit 66d857b08b ("m68k: merge m68k and m68knommu arch directories")
moved the files around.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMAINTAINERS: add ARM/ts78xx-setup platform maintainer
Alexander Clouter [Thu, 14 Apr 2011 22:22:02 +0000]
MAINTAINERS: add ARM/ts78xx-setup platform maintainer

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agokstrtox: simpler code in _kstrtoull()
Alexey Dobriyan [Thu, 14 Apr 2011 22:22:02 +0000]
kstrtox: simpler code in _kstrtoull()

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agokstrtox: fix compile warnings in test
Alexey Dobriyan [Thu, 14 Apr 2011 22:22:00 +0000]
kstrtox: fix compile warnings in test

Fix the following warnings:

CC [M] lib/test-kstrtox.o
  lib/test-kstrtox.c: In function 'test_kstrtou64_ok':
  lib/test-kstrtox.c:318: warning: this decimal constant is unsigned only in ISO C90
...

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoleds/leds-regulator.c: fix handling of already enabled regulators
Antonio Ospite [Thu, 14 Apr 2011 22:21:59 +0000]
leds/leds-regulator.c: fix handling of already enabled regulators

Make the driver aware of the initial status of the regulator.

The leds-regulator driver was ignoring the initial status of the
regulator; this resulted in rdev->use_count being incremented to 2 after
calling regulator_led_set_value() in the .probe method when a regulator
was already enabled at insmod time, which made it impossible to ever
disable the regulator.

Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Antonio Ospite <ospite@studenti.unina.it>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agovmstat: update comment regarding stat_threshold
Christoph Lameter [Thu, 14 Apr 2011 22:21:58 +0000]
vmstat: update comment regarding stat_threshold

Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm/page_alloc.c: silence build_all_zonelists() section mismatch
Paul Mundt [Thu, 14 Apr 2011 22:21:57 +0000]
mm/page_alloc.c: silence build_all_zonelists() section mismatch

The memory hotplug case involves calling to build_all_zonelists() which
in turns calls in to setup_zone_pageset().  The latter is marked
__meminit while build_all_zonelists() itself has no particular
annotation.  build_all_zonelists() is only handed a non-NULL pointer in
the case of memory hotplug through an existing __meminit path, so the
setup_zone_pageset() reference is always safe.

The options as such are either to flag build_all_zonelists() as __ref (as
per __build_all_zonelists()), or to simply discard the __meminit
annotation from setup_zone_pageset().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofs/partitions/ldm.c: fix oops caused by corrupted partition table
Timo Warns [Thu, 14 Apr 2011 22:21:56 +0000]
fs/partitions/ldm.c: fix oops caused by corrupted partition table

The kernel automatically evaluates partition tables of storage devices.
The code for evaluating LDM partitions (in fs/partitions/ldm.c) contains
a bug that causes a kernel oops on certain corrupted LDM partitions.
A kernel subsystem seems to crash, because, after the oops, the kernel no
longer recognizes newly connected storage devices.

The patch validates the value of vblk_size.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Timo Warns <warns@pre-sense.de>
Cc: Eugene Teo <eugeneteo@kernel.sg>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Richard Russon <rich@flatcap.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agodrivers/rtc/rtc-mc13xxx.c: fix unterminated platform_device_id table
Axel Lin [Thu, 14 Apr 2011 22:21:55 +0000]
drivers/rtc/rtc-mc13xxx.c: fix unterminated platform_device_id table

The platform_device_id table is supposed to be zero-terminated.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: optimize pfn calculation in online_page()
Daniel Kiper [Thu, 14 Apr 2011 22:21:53 +0000]
mm: optimize pfn calculation in online_page()

If CONFIG_FLATMEM is enabled pfn is calculated in online_page() more than
once.  It is possible to optimize that and use value established at
beginning of that function.

Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Dave Hansen <dave@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomemcg: fix mem_cgroup_rotate_reclaimable_page()
Eric Dumazet [Thu, 14 Apr 2011 22:21:52 +0000]
memcg: fix mem_cgroup_rotate_reclaimable_page()

commit 3f58a8294333 ("move memcg reclaimable page into tail of inactive
list") added inline keyword twice in its prototype.

CC arch/x86/kernel/asm-offsets.s
  In file included from include/linux/swap.h:8,
                   from include/linux/suspend.h:4,
                   from arch/x86/kernel/asm-offsets.c:12:
  include/linux/memcontrol.h:220: error: duplicate `inline'

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoBlackfin: SMP: fix cache flush loop
Sonic Zhang [Tue, 12 Apr 2011 08:16:04 +0000]
Blackfin: SMP: fix cache flush loop

The recent commit (10774912647781) wasn't entirely correct.  While
it fixed some issues, it introduced others.  So pull in the fixes
from the public cache flush functions, and document why we need to
call things directly ourselves.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

8 years agoBlackfin: time-ts: ack gptimer sooner to avoid missing short ints
Mike Frysinger [Mon, 4 Apr 2011 15:26:11 +0000]
Blackfin: time-ts: ack gptimer sooner to avoid missing short ints

If the period of a gptimer is fairly low, we might miss an interrupt
by acking it too late (we end up acking the new int as well).

Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

8 years agoBlackfin: gptimers: fix thinko when disabling timers
Mike Frysinger [Mon, 4 Apr 2011 15:20:50 +0000]
Blackfin: gptimers: fix thinko when disabling timers

We only want to clear the run bit for this one timer, not all status bits.
So don't read the whole reg and then write all the bits back out.

Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

8 years agoBlackfin: SMP: make all barriers handle cache issues
Graf Yang [Thu, 7 Jan 2010 06:57:30 +0000]
Blackfin: SMP: make all barriers handle cache issues

When suspending/resuming, the common task freezing code will run in
parallel and freeze processes on each core.  This is because the code
uses the non-smp version of memory barriers (as well it should).

The Blackfin smp barrier logic at the moment contains the cache sync
logic, but the non-smp barriers do not.  This is incorrect as Rafel
summarized:
> ...
> The existing memory barriers are SMP barriers too, but they are more
> than _just_ SMP barriers.  At least that's how it is _supposed_ to be
> (eg. rmb() is supposed to be stronger than smp_rmb()).
> ...
> However, looking at the blackfin's definitions of SMP barriers I see
> that it uses extra stuff that should _also_ be used in the definitions
> of the mandatory barriers.
> ...

URL: http://lkml.org/lkml/2011/4/13/11
LKML-Reference: <BANLkTi=F-C-vwX4PGGfbkdTBw3OWL-twfg@mail.gmail.com>
Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

8 years agoblock, blk-sysfs: Use the variable directly instead of a function call
Liu Yuan [Wed, 13 Apr 2011 20:14:54 +0000]
block, blk-sysfs: Use the variable directly instead of a function call

In the function blk_register_queue(), var _dev_ is already assigned by
disk_to_dev().So use it directly instead of calling disk_to_dev() again.

Signed-off-by: Liu Yuan <tailai.ly@taobao.com>

Modified by me to delete an empty line in the same function while
in there anyway.

Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platf...
Linus Torvalds [Wed, 13 Apr 2011 16:15:55 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  x86 platform drivers: Build fix for intel_pmic_gpio

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt...
Linus Torvalds [Wed, 13 Apr 2011 16:15:40 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/egtvedt/avr32-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/egtvedt/avr32-2.6:
  avr32: add ATAG_BOARDINFO
  don't check platform_get_irq's return value against zero
  avr32: init cannot ignore signals sent by force_sig_info()
  avr32: fix deadlock when reading clock list in debugfs
  avr32: Fix .size directive for cpu_enter_idle
  avr32: At32ap: pio fix typo "))" on gpio_irq_unmask prototype
  fix the wrong argument of the functions definition

8 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 13 Apr 2011 16:10:25 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (22 commits)
  Revert "i915: restore only the mode of this driver on lastclose"
  Revert "ttm: Utilize the DMA API for pages that have TTM_PAGE_FLAG_DMA32 set."
  i915: select VIDEO_OUTPUT_CONTROL for ACPI_VIDEO
  drm/radeon/kms: properly program vddci on evergreen+
  drm/radeon/kms: add voltage type to atom set voltage function
  drm/radeon/kms: fix pcie_p callbacks on btc and cayman
  drm/radeon/kms: fix suspend on rv530 asics
  drm/radeon/kms: clean up gart dummy page handling
  drm/radeon/kms: make radeon i2c put/get bytes less noisy
  drm/radeon/kms: pll tweaks for rv6xx
  drm/radeon: Fix KMS legacy backlight support if CONFIG_BACKLIGHT_CLASS_DEVICE=m.
  radeon: Fix KMS CP writeback on big endian machines.
  i915: restore only the mode of this driver on lastclose
  drm/nvc0: improve vm flush function
  drm/nv50-nvc0: remove some code that doesn't belong here
  drm/nv50: use "nv86" tlb flush method on everything except 0x50/0xac
  drm/nouveau: quirk for XFX GT-240X-YA
  drm/nv50-nvc0: work around an evo channel hang that some people see
  drm/nouveau: implement init table opcode 0x5c
  drm/nouveau: fix oops on unload with disabled LVDS panel
  ...

8 years agox86 platform drivers: Build fix for intel_pmic_gpio
Matthew Garrett [Wed, 13 Apr 2011 15:52:16 +0000]
x86 platform drivers: Build fix for intel_pmic_gpio

Fix an incorrect function name so the driver builds.

Signed-off-by: Matthew Garrett <mjg@redhat.com>

8 years agoblock: don't flush plugged IO on forced preemtion scheduling
Linus Torvalds [Wed, 13 Apr 2011 15:08:20 +0000]
block: don't flush plugged IO on forced preemtion scheduling

We really only want to unplug the pending IO when the process actually
goes to sleep.  So move the test for flushing the plug up to the place
where we actually deactivate the task - where we have properly checked
for preemption and for the process really sleeping.

Acked-by: Jens Axboe <jaxboe@fusionio.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agovm: fix vm_pgoff wrap in stack expansion
Linus Torvalds [Wed, 13 Apr 2011 15:07:28 +0000]
vm: fix vm_pgoff wrap in stack expansion

Commit 982134ba6261 ("mm: avoid wrapping vm_pgoff in mremap()") fixed
the case of a expanding mapping causing vm_pgoff wrapping when you used
mremap.  But there was another case where we expand mappings hiding in
plain sight: the automatic stack expansion.

This fixes that case too.

This one also found by Robert Święcki, using his nasty system call
fuzzer tool.  Good job.

Reported-and-tested-by: Robert Święcki <robert@swiecki.net>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoavr32: add ATAG_BOARDINFO
Andreas Bießmann [Wed, 13 Apr 2011 08:07:35 +0000]
avr32: add ATAG_BOARDINFO

The ATAG_BOARDINFO is intended to hand over the information
bd->bi_board_number from u-boot to the kernel.

This piece of information can be used to implement some kind of board
identification while booting the kernel. Therefore it is placed in .initdata
section and can be accessed via the new symbol board_number only while
initializing the kernel.

Signed-off-by: Andreas Bießmann <biessmann@corscience.de>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

8 years agodon't check platform_get_irq's return value against zero
Uwe Kleine-König [Wed, 9 Feb 2011 10:28:04 +0000]
don't check platform_get_irq's return value against zero

platform_get_irq returns -ENXIO on failure, so !int_irq was probably
always true.  Better use (int)int_irq <= 0.  Note that a return value of
zero is still handled as error even though this could mean irq0.

This is a followup to 305b3228f9ff4d59f49e6d34a7034d44ee8ce2f0 that
changed the return value of platform_get_irq from 0 to -ENXIO on error.

Acked-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

8 years agoavr32: init cannot ignore signals sent by force_sig_info()
Matt Fleming [Mon, 4 Apr 2011 14:58:04 +0000]
avr32: init cannot ignore signals sent by force_sig_info()

We can delete the code that checks to see if we're sending an ignored
signal to init because force_sig_info() already handles this case.
force_sig_info() will kill init even if the signal handler is SIG_DFL
and the scenario described in the comment where init might "generate
the same exception over and over again" cannot occur (force_sig_info()
clears SIGNAL_UNKILLABLE to ensure that init will die).

Also, the use of is_global_init() is not correct in the multhreaded
case, as Oleg Nesterov explains,

"is_global_init() is not right in theory, /sbin/init can be
multithreaded. And, this doesn't cover the sub-namespace
inits... I'd suggest to check SIGNAL_UNKILLABLE, but looking
closer I think you can simply remove this code."

It seems this code was copied from arch/powerpc in March 2007 in commit

  623b0355d5b1 "[AVR32] Clean up exception handling code"

but the code was deleted from arch/powerpc in November 2009 in commit

  a0592d42fe3e "powerpc: kill the obsolete code under is_global_init()"

So catch up with powerpc and delete the bogus code.

Signed-off-by: Matt Fleming <matt.fleming@linux.intel.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

8 years agoavr32: fix deadlock when reading clock list in debugfs
Ole Henrik Jahren [Sun, 6 Mar 2011 19:42:39 +0000]
avr32: fix deadlock when reading clock list in debugfs

When writing out /sys/kernel/debug/at32ap_clk, clock list lock is being
held while clk_get() is called. clk_get() attempts to take the same
lock, which results in deadlock. Introduce and call lock free version,
__clk_get(), instead.

Signed-off-by: Ole Henrik Jahren <olehenja@alumni.ntnu.no>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

8 years agoavr32: Fix .size directive for cpu_enter_idle
Ben Hutchings [Wed, 9 Mar 2011 00:32:36 +0000]
avr32: Fix .size directive for cpu_enter_idle

gas used to accept (and ignore?) .size directives which referred to
undefined symbols, as this does.  In binutils 2.21 these are treated
as errors.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

8 years agoavr32: At32ap: pio fix typo "))" on gpio_irq_unmask prototype
Jean-Christophe PLAGNIOL-VILLARD [Sun, 10 Apr 2011 04:17:20 +0000]
avr32: At32ap: pio fix typo "))" on gpio_irq_unmask prototype

introduce in commit d75f1bfdbccb

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

8 years agofix the wrong argument of the functions definition
Wanlong Gao [Sun, 10 Apr 2011 06:14:43 +0000]
fix the wrong argument of the functions definition

The functions of eic_chip's memebers use the wrong argument .

Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
Signed-off-by: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>

8 years agoUBIFS: fix compilation warnings when compiling with gcc 4.5
Maksim Rayskiy [Tue, 12 Apr 2011 22:14:56 +0000]
UBIFS: fix compilation warnings when compiling with gcc 4.5

When compiling UBIFS with CONFIG_UBIFS_FS_DEBUG not set,
gcc-4.5.2 generates a slew of "warning: statement with no effect"
on references to non-void functions defined as 0.
To avoid these warnings, replace #defines with dummy inline functions.

Artem: massage the patch a bit, also remove the duplicate
       'dbg_check_lprops()' prototype.

Signed-off-by: Maksim Rayskiy <maksim.rayskiy@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

8 years agoUBIFS: fix oops when R/O file-system is fsync'ed
Artem Bityutskiy [Wed, 13 Apr 2011 07:31:52 +0000]
UBIFS: fix oops when R/O file-system is fsync'ed

This patch fixes severe UBIFS bug: UBIFS oopses when we 'fsync()' an
file on R/O-mounter file-system. We (the UBIFS authors) incorrectly
thought that VFS would not propagate 'fsync()' down to the file-system
if it is read-only, but this is not the case.

It is easy to exploit this bug using the following simple perl script:

use strict;
use File::Sync qw(fsync sync);

die "File path is not specified" if not defined $ARGV[0];
my $path = $ARGV[0];

open FILE, "<", "$path" or die "Cannot open $path: $!";
fsync(\*FILE) or die "cannot fsync $path: $!";
close FILE or die "Cannot close $path: $!";

Thanks to Reuben Dowle <Reuben.Dowle@navico.com> for reporting about this
issue.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Reported-by: Reuben Dowle <Reuben.Dowle@navico.com>
Cc: stable@kernel.org

8 years agom68k,m68knommu: Wire up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs
Geert Uytterhoeven [Tue, 12 Apr 2011 20:24:45 +0000]
m68k,m68knommu: Wire up name_to_handle_at, open_by_handle_at, clock_adjtime, syncfs

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael...
Linus Torvalds [Wed, 13 Apr 2011 00:18:05 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/rafael/suspend-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  fix XEN_SAVE_RESTORE Kconfig dependencies
  PM / Hibernate: Introduce CONFIG_HIBERNATE_CALLBACKS

8 years agoRevert "i915: restore only the mode of this driver on lastclose"
Dave Airlie [Tue, 12 Apr 2011 23:20:24 +0000]
Revert "i915: restore only the mode of this driver on lastclose"

This reverts commit 0a0883c8433c743dad0a4d9ebe2717558f2c209e.

this was in my tree by accident, I meant to rebase it out and
didn't realise in time.

Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoRevert "ttm: Utilize the DMA API for pages that have TTM_PAGE_FLAG_DMA32 set."
Dave Airlie [Tue, 12 Apr 2011 23:15:09 +0000]
Revert "ttm: Utilize the DMA API for pages that have TTM_PAGE_FLAG_DMA32 set."

This reverts commit 69a07f0b117a40fcc1a479358d8e1f41793617f2.

We've tracked a number of problems back to this, and Thomas
thinks we should redesign this for .40/41 anyways so I'm
happy to revert it.

Signed-off-by: Dave Airlie <airlied@redhat.com>