11 years ago[JFFS2] remove junk prototypes
Artem Bityutskiy [Thu, 8 Jan 2009 17:38:07 +0000]
[JFFS2] remove junk prototypes

'rb_prev()', 'rb_next()' and 'rb_replace_node()' are declared in
include/linux/rbtree.h, no need for JFFS2 to re-declare them. I
believe these are left-overs from the old days when the common
RB tree code did not have those call and JFFS2 had private
implementation.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

11 years agoMerge git://git.infradead.org/mtd-2.6
Linus Torvalds [Fri, 9 Jan 2009 20:36:45 +0000]
Merge git://git.infradead.org/mtd-2.6

* git://git.infradead.org/mtd-2.6: (67 commits)
  [MTD] [MAPS] Fix printk format warning in nettel.c
  [MTD] [NAND] add cmdline parsing (mtdparts=) support to cafe_nand
  [MTD] CFI: remove major/minor version check for command set 0x0002
  [MTD] [NAND] ndfc driver
  [MTD] [TESTS] Fix some size_t printk format warnings
  [MTD] LPDDR Makefile and KConfig
  [MTD] LPDDR extended physmap driver to support LPDDR flash
  [MTD] LPDDR added new pfow_base parameter
  [MTD] LPDDR Command set driver
  [MTD] LPDDR PFOW definition
  [MTD] LPDDR QINFO records definitions
  [MTD] LPDDR qinfo probing.
  [MTD] [NAND] pxa3xx: convert from ns to clock ticks more accurately
  [MTD] [NAND] pxa3xx: fix non-page-aligned reads
  [MTD] [NAND] fix nandsim sched.h references
  [MTD] [NAND] alauda: use USB API functions rather than constants
  [MTD] struct device - replace bus_id with dev_name(), dev_set_name()
  [MTD] fix m25p80 64-bit divisions
  [MTD] fix dataflash 64-bit divisions
  [MTD] [NAND] Set the fsl elbc ECCM according the settings in bootloader.
  ...

Fixed up trivial debug conflicts in drivers/mtd/devices/{m25p80.c,mtd_dataflash.c}

11 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Fri, 9 Jan 2009 19:55:14 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (94 commits)
  ACPICA: hide private headers
  ACPICA: create acpica/ directory
  ACPI: fix build warning
  ACPI : Use RSDT instead of XSDT by adding boot option of "acpi=rsdt"
  ACPI: Avoid array address overflow when _CST MWAIT hint bits are set
  fujitsu-laptop: Simplify SBLL/SBL2 backlight handling
  fujitsu-laptop: Add BL power, LED control and radio state information
  ACPICA: delete utcache.c
  ACPICA: delete acdisasm.h
  ACPICA: Update version to 20081204.
  ACPICA: FADT: Update error msgs for consistency
  ACPICA: FADT: set acpi_gbl_use_default_register_widths to TRUE by default
  ACPICA: FADT parsing changes and fixes
  ACPICA: Add ACPI_MUTEX_TYPE configuration option
  ACPICA: Fixes for various ACPI data tables
  ACPICA: Restructure includes into public/private
  ACPI: remove private acpica headers from driver files
  ACPI: reboot.c: use new acpi_reset interface
  ACPICA: New: acpi_reset interface - write to reset register
  ACPICA: Move all public H/W interfaces to new hwxface
  ...

11 years agolibata: use WARN_ON_ONCE on hot paths
Tejun Heo [Fri, 9 Jan 2009 10:19:14 +0000]
libata: use WARN_ON_ONCE on hot paths

Convert WARN_ON() on command issue/completion paths to WARN_ON_ONCE()
so that libata doesn't spam the machine even when one of those
conditions triggers repeatedly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoCRED: Must initialise the new creds in prepare_kernel_cred()
David Howells [Fri, 9 Jan 2009 16:13:46 +0000]
CRED: Must initialise the new creds in prepare_kernel_cred()

The newly allocated creds in prepare_kernel_cred() must be initialised
before get_uid() and get_group_info() can access them.  They should be
copied from the old credentials.

Reported-by: Steve Dickson <steved@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoCRED: Missing put_cred() in prepare_kernel_cred()
David Howells [Fri, 9 Jan 2009 16:13:41 +0000]
CRED: Missing put_cred() in prepare_kernel_cred()

Missing put_cred() in the error handling path of prepare_kernel_cred().

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Steve Dickson <steved@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
Linus Torvalds [Fri, 9 Jan 2009 19:53:07 +0000]
Merge git://git./linux/kernel/git/kyle/parisc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: export length of os_hpmc vector
  parisc: fix kernel crash (protection id trap) when compiling ruby1.9
  parisc: Use DEFINE_SPINLOCK
  parisc: add uevent helper for parisc bus
  parisc: fix ipv6 checksum
  parisc: quiet palo not-found message from "which"
  parisc: Replace NR_CPUS in parisc code
  parisc: trivial fixes
  parisc: fix braino in commit adding __space_to_prot
  parisc: factor out sid to protid conversion
  parisc: use leX_to_cpu in place of __fswabX
  parisc: fix GFP_KERNEL use while atomic in unwinder
  parisc: remove dead BIO_VMERGE_BOUNDARY and BIO_VMERGE_MAX_SIZE definitions
  parisc: set_time() catch errors
  parisc: use the new byteorder headers
  parisc: drivers/parisc/: make code static
  parisc: lib/: make code static

11 years agoMerge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
Linus Torvalds [Fri, 9 Jan 2009 19:52:14 +0000]
Merge branch 'next' of git://git./linux/kernel/git/djbw/async_tx

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx: (22 commits)
  ioat: fix self test for multi-channel case
  dmaengine: bump initcall level to arch_initcall
  dmaengine: advertise all channels on a device to dma_filter_fn
  dmaengine: use idr for registering dma device numbers
  dmaengine: add a release for dma class devices and dependent infrastructure
  ioat: do not perform removal actions at shutdown
  iop-adma: enable module removal
  iop-adma: kill debug BUG_ON
  iop-adma: let devm do its job, don't duplicate free
  dmaengine: kill enum dma_state_client
  dmaengine: remove 'bigref' infrastructure
  dmaengine: kill struct dma_client and supporting infrastructure
  dmaengine: replace dma_async_client_register with dmaengine_get
  atmel-mci: convert to dma_request_channel and down-level dma_slave
  dmatest: convert to dma_request_channel
  dmaengine: introduce dma_request_channel and private channels
  net_dma: convert to dma_find_channel
  dmaengine: provide a common 'issue_pending_all' implementation
  dmaengine: centralize channel allocation, introduce dma_find_channel
  dmaengine: up-level reference counting to the module level
  ...

11 years ago[MTD] [MAPS] Fix printk format warning in nettel.c
David Woodhouse [Fri, 9 Jan 2009 14:17:50 +0000]
[MTD] [MAPS] Fix printk format warning in nettel.c

MTD size is 64-bit now...

Pointed out by Randy Dunlap <randy.dunlap@oracle.com>

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

11 years ago[MTD] [NAND] add cmdline parsing (mtdparts=) support to cafe_nand
Philip Rakity [Wed, 8 Oct 2008 23:08:20 +0000]
[MTD] [NAND] add cmdline parsing (mtdparts=) support to cafe_nand

[dwmw2: updated and made to still register whole device first]
Signed-off-by: Philip Rakity <pakity@yahoo.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

11 years ago[MTD] CFI: remove major/minor version check for command set 0x0002
Wolfgang Grandegger [Thu, 8 Jan 2009 18:21:27 +0000]
[MTD] CFI: remove major/minor version check for command set 0x0002

The NOR Flash memory K8P2815UQB from Samsung uses the major version
number '0'. Add a quirk to cope with it.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>

11 years agoMerge branch 'drivers-platform' into release
Len Brown [Fri, 9 Jan 2009 09:01:26 +0000]
Merge branch 'drivers-platform' into release

Conflicts:
drivers/misc/Kconfig

Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoMerge branch 'simplify_PRT' into release
Len Brown [Fri, 9 Jan 2009 08:41:08 +0000]
Merge branch 'simplify_PRT' into release

Conflicts:
drivers/acpi/pci_irq.c

Note that this merge disables
e1d3a90846b40ad3160bf4b648d36c6badad39ac
pci, acpi: reroute PCI interrupt to legacy boot interrupt equivalent

Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoMerge branch 'linus' into release
Len Brown [Fri, 9 Jan 2009 08:39:43 +0000]
Merge branch 'linus' into release

11 years agoMerge branch 'suspend' into release
Len Brown [Fri, 9 Jan 2009 08:38:15 +0000]
Merge branch 'suspend' into release

11 years agoMerge branch 'misc' into release
Len Brown [Fri, 9 Jan 2009 08:37:48 +0000]
Merge branch 'misc' into release

Conflicts:
include/acpi/acpixf.h

Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoMerge branch 'fujitsu-laptop' into release
Len Brown [Fri, 9 Jan 2009 08:37:26 +0000]
Merge branch 'fujitsu-laptop' into release

11 years agoMerge branch 'fluff' into release
Len Brown [Fri, 9 Jan 2009 08:37:20 +0000]
Merge branch 'fluff' into release

11 years agoMerge branches 'release', 'bugzilla-11880', 'bugzilla-12037' and 'bugzilla-12257...
Len Brown [Fri, 9 Jan 2009 08:37:11 +0000]
Merge branches 'release', 'bugzilla-11880', 'bugzilla-12037' and 'bugzilla-12257' into release

11 years agoMerge branch 'battery' into release
Len Brown [Fri, 9 Jan 2009 08:36:59 +0000]
Merge branch 'battery' into release

11 years agoMerge branch 'asus-eeepc' into release
Len Brown [Fri, 9 Jan 2009 08:36:53 +0000]
Merge branch 'asus-eeepc' into release

11 years agoMerge branch 'alarm' into release
Len Brown [Fri, 9 Jan 2009 08:36:32 +0000]
Merge branch 'alarm' into release

11 years agoACPICA: hide private headers
Len Brown [Fri, 9 Jan 2009 05:30:03 +0000]
ACPICA: hide private headers

Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoACPICA: create acpica/ directory
Len Brown [Fri, 9 Jan 2009 05:13:17 +0000]
ACPICA: create acpica/ directory

also, delete sleep/ and delete ACPI_CFLAGS from Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoACPI: fix build warning
Len Brown [Fri, 9 Jan 2009 07:10:16 +0000]
ACPI: fix build warning

when CONFIG_RTC_DRV_CMOS=m
and thus !defined(HAVE_ACPI_LEGACY_ALARM)

drivers/acpi/proc.c:85: warning: ‘cmos_bcd_read’ declared ‘static’ but
never defined

Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoACPI : Use RSDT instead of XSDT by adding boot option of "acpi=rsdt"
Zhao Yakui [Wed, 17 Dec 2008 08:55:18 +0000]
ACPI : Use RSDT instead of XSDT by adding boot option of "acpi=rsdt"

On some boxes there exist both RSDT and XSDT table. But unfortunately
sometimes there exists the following error when XSDT table is used:
   a. 32/64X address mismatch
   b. The 32/64X FACS address mismatch

   In such case the boot option of "acpi=rsdt" is provided so that
RSDT is tried instead of XSDT table when the system can't work well.

http://bugzilla.kernel.org/show_bug.cgi?id=8246

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
cc:Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoACPI: Avoid array address overflow when _CST MWAIT hint bits are set
Zhao Yakui [Sun, 4 Jan 2009 04:04:21 +0000]
ACPI: Avoid array address overflow when _CST MWAIT hint bits are set

The Cx Register address obtained from the _CST object is used as the MWAIT
hints if the register type is FFixedHW. And it is used to check whether
the Cx type is supported or not.

On some boxes the following Cx state package is obtained from _CST object:
    >{
                ResourceTemplate ()
                {
                    Register (FFixedHW,
                        0x01,               // Bit Width
                        0x02,               // Bit Offset
                        0x0000000000889759, // Address
                        0x03,               // Access Size
                        )
                },

                0x03,
                0xF5,
                0x015E }

   In such case we should use the bit[7:4] of Cx address to check whether
the Cx type is supported or not.

mask the MWAIT hint to avoid array address overflow

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Acked-by:Venki Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

11 years agofujitsu-laptop: Simplify SBLL/SBL2 backlight handling
Tony Vroon [Wed, 7 Jan 2009 10:11:24 +0000]
fujitsu-laptop: Simplify SBLL/SBL2 backlight handling

GBLS and GBLL only differ in the clearing of the GHKS flag, so there is no need
to have two backlight level readouts. Also, per Peter Gruber, the need for the
BLNF check has disappeared.
As a result, cleanups can be made in the code. This has been tested on the both
the S6410 and the S6420 platforms and causes no functionality regressions, on
the console without X or within X. One module parameter to disable the hotkeys
is dropped, as we only ever took one codepath anyway.

Signed-off-by: Tony Vroon <tony@linx.net>
Tested-by: Peter Gruber <nokos@gmx.net>
Tested-By: Stephen Gildea <stepheng+linux@gildea.com>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>

11 years agofujitsu-laptop: Add BL power, LED control and radio state information
Tony Vroon [Wed, 31 Dec 2008 18:19:59 +0000]
fujitsu-laptop: Add BL power, LED control and radio state information

The FUNC interface in the Fujitsu-Siemens DSDT was unused until now. It exposes
state information that is now reported in additional platform files (whether the
radios are killed by the hardware switch or operational, whether the machine is
docked and whether the lid is open).
Support for the backlight class is now extended with the ability to power the
backlight on & off. Optional support for the LED class allows the keyboard
headlamps found on the U810 netbook and the Fujitsu logo illumination on the
P8010 notebook to be turned on & off.

This was fed through checkpatch.pl and tested on the S6420, P8010 & U810 platforms.

Signed-off-by: Stephen Gildea <stepheng+linux@gildea.com>
Tested-by: Stephen Gildea <stepheng+linux@gildea.com>
Tested-by: Julian Brown <jules@panic.cs-bristol.org.uk>
Signed-off-by: Tony Vroon <tony@linx.net>
Tested-by: Peter Gruber <nokos@gmx.net>
Acked-by: Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoACPICA: delete utcache.c
Len Brown [Fri, 9 Jan 2009 04:46:09 +0000]
ACPICA: delete utcache.c

ACPI_USE_LOCAL_CACHE will never be defined by the Linux kernel,
and thus utcache.c will always be dead code.

Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoACPICA: delete acdisasm.h
Len Brown [Fri, 9 Jan 2009 04:44:17 +0000]
ACPICA: delete acdisasm.h

it is referenced only #ifdef ACPI_DISASSEMBLER,
which is never set by the kernel.

Signed-off-by: Len Brown <len.brown@intel.com>

11 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Fri, 9 Jan 2009 01:14:59 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (57 commits)
  jbd2: Fix oops in jbd2_journal_init_inode() on corrupted fs
  ext4: Remove "extents" mount option
  block: Add Kconfig help which notes that ext4 needs CONFIG_LBD
  ext4: Make printk's consistently prefixed with "EXT4-fs: "
  ext4: Add sanity checks for the superblock before mounting the filesystem
  ext4: Add mount option to set kjournald's I/O priority
  jbd2: Submit writes to the journal using WRITE_SYNC
  jbd2: Add pid and journal device name to the "kjournald2 starting" message
  ext4: Add markers for better debuggability
  ext4: Remove code to create the journal inode
  ext4: provide function to release metadata pages under memory pressure
  ext3: provide function to release metadata pages under memory pressure
  add releasepage hooks to block devices which can be used by file systems
  ext4: Fix s_dirty_blocks_counter if block allocation failed with nodelalloc
  ext4: Init the complete page while building buddy cache
  ext4: Don't allow new groups to be added during block allocation
  ext4: mark the blocks/inode bitmap beyond end of group as used
  ext4: Use new buffer_head flag to check uninit group bitmaps initialization
  ext4: Fix the race between read_inode_bitmap() and ext4_new_inode()
  ext4: code cleanup
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6
Linus Torvalds [Fri, 9 Jan 2009 00:27:31 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-misc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (45 commits)
  [SCSI] qla2xxx: Update version number to 8.03.00-k1.
  [SCSI] qla2xxx: Add ISP81XX support.
  [SCSI] qla2xxx: Use proper request/response queues with MQ instantiations.
  [SCSI] qla2xxx: Correct MQ-chain information retrieval during a firmware dump.
  [SCSI] qla2xxx: Collapse EFT/FCE copy procedures during a firmware dump.
  [SCSI] qla2xxx: Don't pollute kernel logs with ZIO/RIO status messages.
  [SCSI] qla2xxx: Don't fallback to interrupt-polling during re-initialization with MSI-X enabled.
  [SCSI] qla2xxx: Remove support for reading/writing HW-event-log.
  [SCSI] cxgb3i: add missing include
  [SCSI] scsi_lib: fix DID_RESET status problems
  [SCSI] fc transport: restore missing dev_loss_tmo callback to LLDD
  [SCSI] aha152x_cs: Fix regression that keeps driver from using shared interrupts
  [SCSI] sd: Correctly handle 6-byte commands with DIX
  [SCSI] sd: DIF: Fix tagging on platforms with signed char
  [SCSI] sd: DIF: Show app tag on error
  [SCSI] Fix error handling for DIF/DIX
  [SCSI] scsi_lib: don't decrement busy counters when inserting commands
  [SCSI] libsas: fix test for negative unsigned and typos
  [SCSI] a2091, gvp11: kill warn_unused_result warnings
  [SCSI] fusion: Move a dereference below a NULL test
  ...

Fixed up trivial conflict due to moving the async part of sd_probe
around in the async probes vs using dev_set_name() in naming.

11 years agoMerge branch 'bkl-removal' of git://git.lwn.net/linux-2.6
Linus Torvalds [Fri, 9 Jan 2009 00:04:50 +0000]
Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6

* 'bkl-removal' of git://git.lwn.net/linux-2.6:
  RTC: Remove the BKL.

11 years agoMerge branch 'docs-next' of git://git.lwn.net/linux-2.6
Linus Torvalds [Thu, 8 Jan 2009 23:52:13 +0000]
Merge branch 'docs-next' of git://git.lwn.net/linux-2.6

* 'docs-next' of git://git.lwn.net/linux-2.6:
  Fix a typo in the development process document.
  Document handling of bad memory
  Document RCU and unloadable modules

11 years agoRTC: Remove the BKL.
David John [Thu, 23 Oct 2008 08:25:56 +0000]
RTC: Remove the BKL.

Remove calls to the BKL since concurrent access is protected
by the spin lock rtc_lock.

Signed-off-by: David John <davidjon@xenontk.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

11 years agoFix a typo in the development process document.
Jonathan Corbet [Thu, 8 Jan 2009 23:32:13 +0000]
Fix a typo in the development process document.

Reported-by: Aníbal Monsalve Salazar <anibal@debian.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Thu, 8 Jan 2009 22:51:11 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: fix kernel-doc warnings
  regulator: catch some registration errors
  regulator: Add basic DocBook manual
  regulator: Fix some kerneldoc rendering issues
  regulator: Add missing kerneldoc
  regulator: Clean up kerneldoc warnings
  regulator: Remove extraneous kerneldoc annotations
  regulator: init/link earlier
  regulator: move set_machine_constraints after regulator device initialization
  regulator: da903x: make da903x_is_enabled return 0 or 1
  regulator: da903x: add '\n' to error messages
  regulator: sysfs attribute reduction (v2)
  regulator: code shrink (v2)
  regulator: improved mode error checks
  regulator: enable/disable refcounting
  regulator: struct device - replace bus_id with dev_name(), dev_set_name()

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 8 Jan 2009 22:25:41 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (84 commits)
  wimax: fix kernel-doc for debufs_dentry member of struct wimax_dev
  net: convert pegasus driver to net_device_ops
  bnx2x: Prevent eeprom set when driver is down
  net: switch kaweth driver to netdevops
  pcnet32: round off carrier watch timer
  i2400m/usb: wrap USB power saving in #ifdef CONFIG_PM
  wimax: testing for rfkill support should also test for CONFIG_RFKILL_MODULE
  wimax: fix kconfig interactions with rfkill and input layers
  wimax: fix '#ifndef CONFIG_BUG' layout to avoid warning
  r6040: bump release number to 0.20
  r6040: warn about MAC address being unset
  r6040: check PHY status when bringing interface up
  r6040: make printks consistent with DRV_NAME
  gianfar: Fixup use of BUS_ID_SIZE
  mlx4_en: Returning real Max in get_ringparam
  mlx4_en: Consider inline packets on completion
  netdev: bfin_mac: enable bfin_mac net dev driver for BF51x
  qeth: convert to net_device_ops
  vlan: add neigh_setup
  dm9601: warn on invalid mac address
  ...

11 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Thu, 8 Jan 2009 22:25:00 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits)
  [ARM] fix pxa930_trkball build errors
  [ARM] fix netx
  [ARM] fix pnx4008
  [ARM] fix pxa
  [ARM] remove missed CLPS7500 defconfig
  [ARM] clps711x: fix warning in edb7211-mm.c
  [ARM] clps711x: fix warning in fortunet
  [ARM] fix AT91, davinci, h720x, ks8695, msm, mx2, mx3, netx, omap1, omap2, pxa, s3c
  [ARM] Fix realview build
  [ARM] 5357/1: Kirkwood: add missing ge01 tclk initialization
  [ARM] 5358/1: AT2440EVB: Use new include path of mci.h
  [ARM] 5361/1: mv78xx0: fix compilation error
  [ARM] 5360/1: Orion: fix compilation error
  [ARM] 5359/1: Kirkwood: fix compilation error
  [ARM] S3C64XX: Fix EINT group macro definition
  [ARM] Ensure CONFIG_SERIAL_SAMSUNG_UARTS is always set.
  [ARM] S3C24XX: Add gpio_to_irq implementation
  [ARM] S3C24XX: Add gpio_to_irq() facility
  [ARM] footbridge: dc21285.c warning fixes
  [ARM] footbridge: add isa_init_irq() to common header
  ...

11 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Thu, 8 Jan 2009 22:03:34 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: don't retry recovery of raid1 that fails due to error on source drive.
  md: Allow md devices to be created by name.
  md: make devices disappear when they are no longer needed.
  md: centralise all freeing of an 'mddev' in 'md_free'
  md: move allocation of ->queue from mddev_find to md_probe
  md: need another print_sb for mdp_superblock_1
  md: use list_for_each_entry macro directly
  md: raid0: make hash_spacing and preshift sector-based.
  md: raid0: Represent the size of strip zones in sectors.
  md: raid0 create_strip_zones(): Add KERN_INFO/KERN_ERR to printk's.
  md: raid0 create_strip_zones(): Make two local variables sector-based.
  md: raid0: Represent zone->zone_offset in sectors.
  md: raid0: Represent device offset in sectors.
  md: raid0_make_request(): Replace local variable block by sector.
  md: raid0_make_request(): Remove local variable chunk_size.
  md: raid0_make_request(): Replace chunksize_bits by chunksect_bits.
  md: use sysfs_notify_dirent to notify changes to md/sync_action.
  md: fix bitmap-on-external-file bug.

11 years agoMerge branch 'devel'
Russell King [Thu, 8 Jan 2009 22:01:49 +0000]
Merge branch 'devel'

11 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzi...
Linus Torvalds [Thu, 8 Jan 2009 22:01:36 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jgarzik/libata-dev

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: clean up the SFF code for coding style
  libata: Add 32bit PIO support
  [libata] ahci: Withdraw IGN_SERR_INTERNAL for SB800 SATA
  pata_hpt366: reimplement mode programming
  [libata] pata_hpt3x3: correct _freeze() function declaration
  libata: Add special ata_pio_need_iordy() handling for Compact Flash.
  pata_platform: __pata_platform_remove() shouldn't be in discard section
  sata_sil24: remove unused sil24_port_multiplier
  [libata] ahci: Add SATA GEN3 related messages
  ata_piix: save, use saved and restore IOCFG
  pata_ali: Fix and workaround for FIFO DMA bug
  pata_ali: force initialise a few bits
  pata_hpt3x3: Workarounds for chipset

11 years agoMerge branch 'next-footbridge' of git://aeryn.fluff.org.uk/bjdooks/linux
Russell King [Thu, 8 Jan 2009 22:01:34 +0000]
Merge branch 'next-footbridge' of git://aeryn.fluff.org.uk/bjdooks/linux

11 years agolibata: clean up the SFF code for coding style
Alan Cox [Mon, 5 Jan 2009 14:16:13 +0000]
libata: clean up the SFF code for coding style

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agolibata: Add 32bit PIO support
Alan Cox [Mon, 5 Jan 2009 14:16:39 +0000]
libata: Add 32bit PIO support

This matters for some controllers and in one or two cases almost doubles
PIO performance. Add a bmdma32 operations set we can inherit and activate
it for some controllers

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years ago[libata] ahci: Withdraw IGN_SERR_INTERNAL for SB800 SATA
Shane Huang [Tue, 30 Dec 2008 02:53:41 +0000]
[libata] ahci: Withdraw IGN_SERR_INTERNAL for SB800 SATA

There is an issue in ATI SB600/SB700 SATA that PxSERR.E should not be
set on some conditions, which will lead to many SATA ODD error messages.
commit 55a61604cd1354e1783364e1c901034f2f474b7d is the workaround.
Since SB800 fixed this HW issue, IGN_SERR_INTERNAL should be withdrawn
for SB800.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agomd: don't retry recovery of raid1 that fails due to error on source drive.
NeilBrown [Thu, 8 Jan 2009 21:31:11 +0000]
md: don't retry recovery of raid1 that fails due to error on source drive.

If a raid1 has only one working drive and it has a sector which
gives an error on read, then an attempt to recover onto a spare will
fail, but as the single remaining drive is not removed from the
array, the recovery will be immediately re-attempted, resulting
in an infinite recovery loop.

So detect this situation and don't retry recovery once an error
on the lone remaining drive is detected.

Allow recovery to be retried once every time a spare is added
in case the problem wasn't actually a media error.

Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: Allow md devices to be created by name.
NeilBrown [Thu, 8 Jan 2009 21:31:10 +0000]
md: Allow md devices to be created by name.

Using sequential numbers to identify md devices is somewhat artificial.
Using names can be a lot more user-friendly.

Also, creating md devices by opening the device special file is a bit
awkward.

So this patch provides a new option for creating and naming devices.

Writing a name such as "md_home" to
    /sys/modules/md_mod/parameters/new_array
will cause an array with that name to be created.  It will appear in
/sys/block/ /proc/partitions and /proc/mdstat as 'md_home'.
It will have an arbitrary minor number allocated.

md devices that a created by an open are destroyed on the last
close when the device is inactive.
For named md devices, they will not be destroyed until the array
is explicitly stopped, either with the STOP_ARRAY ioctl or by
writing 'clear' to /sys/block/md_XXXX/md/array_state.

The name of the array must start 'md_' to avoid conflict with
other devices.

Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: make devices disappear when they are no longer needed.
NeilBrown [Thu, 8 Jan 2009 21:31:10 +0000]
md: make devices disappear when they are no longer needed.

Currently md devices, once created, never disappear until the module
is unloaded.  This is essentially because the gendisk holds a
reference to the mddev, and the mddev holds a reference to the
gendisk, this a circular reference.

If we drop the reference from mddev to gendisk, then we need to ensure
that the mddev is destroyed when the gendisk is destroyed.  However it
is not possible to hook into the gendisk destruction process to enable
this.

So we drop the reference from the gendisk to the mddev and destroy the
gendisk when the mddev gets destroyed.  However this has a
complication.
Between the call
   __blkdev_get->get_gendisk->kobj_lookup->md_probe
and the call
   __blkdev_get->md_open

there is no obvious way to hold a reference on the mddev any more, so
unless something is done, it will disappear and gendisk will be
destroyed prematurely.

Also, once we decide to destroy the mddev, there will be an unlockable
moment before the gendisk is unlinked (blk_unregister_region) during
which a new reference to the gendisk can be created.  We need to
ensure that this reference can not be used.  i.e. the ->open must
fail.

So:
 1/  in md_probe we set a flag in the mddev (hold_active) which
     indicates that the array should be treated as active, even
     though there are no references, and no appearance of activity.
     This is cleared by md_release when the device is closed if it
     is no longer needed.
     This ensures that the gendisk will survive between md_probe and
     md_open.

 2/  In md_open we check if the mddev we expect to open matches
     the gendisk that we did open.
     If there is a mismatch we return -ERESTARTSYS and modify
     __blkdev_get to retry from the top in that case.
     In the -ERESTARTSYS sys case we make sure to wait until
     the old gendisk (that we succeeded in opening) is really gone so
     we loop at most once.

Some udev configurations will always open an md device when it first
appears.   If we allow an md device that was just created by an open
to disappear on an immediate close, then this can race with such udev
configurations and result in an infinite loop the device being opened
and closed, then re-open due to the 'ADD' even from the first open,
and then close and so on.
So we make sure an md device, once created by an open, remains active
at least until some md 'ioctl' has been made on it.  This means that
all normal usage of md devices will allow them to disappear promptly
when not needed, but the worst that an incorrect usage will do it
cause an inactive md device to be left in existence (it can easily be
removed).

As an array can be stopped by writing to a sysfs attribute
  echo clear > /sys/block/mdXXX/md/array_state
we need to use scheduled work for deleting the gendisk and other
kobjects.  This allows us to wait for any pending gendisk deletion to
complete by simply calling flush_scheduled_work().

Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: centralise all freeing of an 'mddev' in 'md_free'
NeilBrown [Thu, 8 Jan 2009 21:31:09 +0000]
md: centralise all freeing of an 'mddev' in 'md_free'

md_free is the .release handler for the md kobj_type.
So it makes sense to release all the objects referenced by
the mddev in there, rather than just prior to calling kobject_put
for what we think is the last time.

Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: move allocation of ->queue from mddev_find to md_probe
NeilBrown [Thu, 8 Jan 2009 21:31:08 +0000]
md: move allocation of ->queue from mddev_find to md_probe

It is more balanced to just do simple initialisation in mddev_find,
which allocates and links a new md device, and leave all the
more sophisticated allocation to md_probe (which calls mddev_find).
md_probe already allocated the gendisk.  It should allocate the
queue too.

Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: need another print_sb for mdp_superblock_1
Cheng Renquan [Thu, 8 Jan 2009 21:31:08 +0000]
md: need another print_sb for mdp_superblock_1

md_print_devices is called in two code path: MD_BUG(...), and md_ioctl
with PRINT_RAID_DEBUG.  it will dump out all in use md devices
information;

However, it wrongly processed two types of superblock in one:

The header file <linux/raid/md_p.h> has defined two types of superblock,
struct mdp_superblock_s (typedefed with mdp_super_t) according to md with
metadata 0.90, and struct mdp_superblock_1 according to md with metadata
1.0 and later,

These two types of superblock are very different,

The md_print_devices code processed them both in mdp_super_t, that would
lead to wrong informaton dump like:

[ 6742.345877]
[ 6742.345887] md: **********************************
[ 6742.345890] md: * <COMPLETE RAID STATE PRINTOUT> *
[ 6742.345892] md: **********************************
[ 6742.345896] md1: <ram7><ram6><ram5><ram4>
[ 6742.345907] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3
[ 6742.345909] md: rdev superblock:
[ 6742.345914] md:  SB: (V:0.90.0) ID:<42ef13c7.598c059a.5f9f1645.801e9ee6> CT:4919856d
[ 6742.345918] md:     L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536
[ 6742.345922] md:     UT:4919856d ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:b7992907 E:00000001
[ 6742.345924]      D  0:  DISK<N:0,(1,8),R:0,S:6>
[ 6742.345930]      D  1:  DISK<N:1,(1,10),R:1,S:6>
[ 6742.345933]      D  2:  DISK<N:2,(1,12),R:2,S:6>
[ 6742.345937]      D  3:  DISK<N:3,(1,14),R:3,S:6>
[ 6742.345942] md:     THIS:  DISK<N:3,(1,14),R:3,S:6>
...
[ 6742.346058] md0: <ram3><ram2><ram1><ram0>
[ 6742.346067] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3
[ 6742.346070] md: rdev superblock:
[ 6742.346073] md:  SB: (V:1.0.0) ID:<369aad81.00000000.00000000.00000000> CT:9a322a9c
[ 6742.346077] md:     L-1507699579 S976570180 ND:48 RD:0 md0 LO:65536 CS:196610
[ 6742.346081] md:     UT:00000018 ST:0 AD:131048 WD:0 FD:8 SD:0 CSUM:00000000 E:00000000
[ 6742.346084]      D  0:  DISK<N:-1,(-1,-1),R:-1,S:-1>
[ 6742.346089]      D  1:  DISK<N:-1,(-1,-1),R:-1,S:-1>
[ 6742.346092]      D  2:  DISK<N:-1,(-1,-1),R:-1,S:-1>
[ 6742.346096]      D  3:  DISK<N:-1,(-1,-1),R:-1,S:-1>
[ 6742.346102] md:     THIS:  DISK<N:0,(0,0),R:0,S:0>
...
[ 6742.346219] md: **********************************
[ 6742.346221]

Here md1 is metadata 0.90.0, and md0 is metadata 1.2

After some more code to distinguish these two types of superblock, in this patch,

it will generate dump information like:

[ 7906.755790]
[ 7906.755799] md: **********************************
[ 7906.755802] md: * <COMPLETE RAID STATE PRINTOUT> *
[ 7906.755804] md: **********************************
[ 7906.755808] md1: <ram7><ram6><ram5><ram4>
[ 7906.755819] md: rdev ram7, SZ:00065472 F:0 S:1 DN:3
[ 7906.755821] md: rdev superblock (MJ:0):
[ 7906.755826] md:  SB: (V:0.90.0) ID:<3fca7a0d.a612bfed.5f9f1645.801e9ee6> CT:491989f3
[ 7906.755830] md:     L5 S00065472 ND:4 RD:4 md1 LO:2 CS:65536
[ 7906.755834] md:     UT:491989f3 ST:1 AD:4 WD:4 FD:0 SD:0 CSUM:00fb52ad E:00000001
[ 7906.755836]      D  0:  DISK<N:0,(1,8),R:0,S:6>
[ 7906.755842]      D  1:  DISK<N:1,(1,10),R:1,S:6>
[ 7906.755845]      D  2:  DISK<N:2,(1,12),R:2,S:6>
[ 7906.755849]      D  3:  DISK<N:3,(1,14),R:3,S:6>
[ 7906.755855] md:     THIS:  DISK<N:3,(1,14),R:3,S:6>
...
[ 7906.755972] md0: <ram3><ram2><ram1><ram0>
[ 7906.755981] md: rdev ram3, SZ:00065472 F:0 S:1 DN:3
[ 7906.755984] md: rdev superblock (MJ:1):
[ 7906.755989] md:  SB: (V:1) (F:0) Array-ID:<5fbcf158:55aa:5fbe:9a79:1e939880dcbd>
[ 7906.755990] md:    Name: "DG5:0" CT:1226410480
[ 7906.755998] md:       L5 SZ130944 RD:4 LO:2 CS:128 DO:24 DS:131048 SO:8 RO:0
[ 7906.755999] md:     Dev:00000003 UUID: 9194d744:87f7:a448:85f2:7497b84ce30a
[ 7906.756001] md:       (F:0) UT:1226410480 Events:0 ResyncOffset:-1 CSUM:0dbcd829
[ 7906.756003] md:         (MaxDev:384)
...
[ 7906.756113] md: **********************************
[ 7906.756116]

this md0 (metadata 1.2) information dumping is exactly according to struct
mdp_superblock_1.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Dan Williams <dan.j.williams@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: use list_for_each_entry macro directly
Cheng Renquan [Thu, 8 Jan 2009 21:31:08 +0000]
md: use list_for_each_entry macro directly

The rdev_for_each macro defined in <linux/raid/md_k.h> is identical to
list_for_each_entry_safe, from <linux/list.h>, it should be defined to
use list_for_each_entry_safe, instead of reinventing the wheel.

But some calls to each_entry_safe don't really need a safe version,
just a direct list_for_each_entry is enough, this could save a temp
variable (tmp) in every function that used rdev_for_each.

In this patch, most rdev_for_each loops are replaced by list_for_each_entry,
totally save many tmp vars; and only in the other situations that will call
list_del to delete an entry, the safe version is used.

Signed-off-by: Cheng Renquan <crquan@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0: make hash_spacing and preshift sector-based.
Andre Noll [Thu, 8 Jan 2009 21:31:08 +0000]
md: raid0: make hash_spacing and preshift sector-based.

This patch renames the hash_spacing and preshift members of struct
raid0_private_data to spacing and sector_shift respectively and
changes the semantics as follows:

We always have spacing = 2 * hash_spacing. In case
sizeof(sector_t) > sizeof(u32) we also have sector_shift = preshift + 1
while sector_shift = preshift = 0 otherwise.

Note that the values of nb_zone and zone are unaffected by these changes
because in the sector_div() preceeding the assignement of these two
variables both arguments double.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0: Represent the size of strip zones in sectors.
Andre Noll [Thu, 8 Jan 2009 21:31:07 +0000]
md: raid0: Represent the size of strip zones in sectors.

This completes the block -> sector conversion of struct strip_zone.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0 create_strip_zones(): Add KERN_INFO/KERN_ERR to printk's.
Andre Noll [Thu, 8 Jan 2009 21:31:07 +0000]
md: raid0 create_strip_zones(): Add KERN_INFO/KERN_ERR to printk's.

This patch consists only of these trivial changes.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0 create_strip_zones(): Make two local variables sector-based.
Andre Noll [Thu, 8 Jan 2009 21:31:07 +0000]
md: raid0 create_strip_zones(): Make two local variables sector-based.

current_offset and curr_zone_offset stored the corresponding offsets
as 1K quantities. Rename them to current_start and curr_zone_start
to match the naming of struct strip_zone and store the offsets as
sector counts.

Also, add KERN_INFO to the printk() affected by this change to make
checkpatch happy.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0: Represent zone->zone_offset in sectors.
Andre Noll [Thu, 8 Jan 2009 21:31:07 +0000]
md: raid0: Represent zone->zone_offset in sectors.

For the same reason as in the previous patch, rename it from zone_offset
to zone_start.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0: Represent device offset in sectors.
Andre Noll [Thu, 8 Jan 2009 21:31:06 +0000]
md: raid0: Represent device offset in sectors.

Rename zone->dev_offset to zone->dev_start to make sure all users
have been converted.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0_make_request(): Replace local variable block by sector.
Andre Noll [Thu, 8 Jan 2009 21:31:06 +0000]
md: raid0_make_request(): Replace local variable block by sector.

This change already simplifies the code a bit.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0_make_request(): Remove local variable chunk_size.
Andre Noll [Thu, 8 Jan 2009 21:31:06 +0000]
md: raid0_make_request(): Remove local variable chunk_size.

We might as well use chunk_sects instead.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: raid0_make_request(): Replace chunksize_bits by chunksect_bits.
Andre Noll [Thu, 8 Jan 2009 21:31:06 +0000]
md: raid0_make_request(): Replace chunksize_bits by chunksect_bits.

As ffz(~(2 * x)) = ffz(~x) + 1, we have

chunksect_bits = chunksize_bits + 1.

Fixup all users accordingly.

Signed-off-by: Andre Noll <maan@systemlinux.org>
Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: use sysfs_notify_dirent to notify changes to md/sync_action.
NeilBrown [Thu, 8 Jan 2009 21:31:05 +0000]
md: use sysfs_notify_dirent to notify changes to md/sync_action.

There is no compelling need for this, but sysfs_notify_dirent is a
nicer interface and the change is good for consistency.

Signed-off-by: NeilBrown <neilb@suse.de>

11 years agomd: fix bitmap-on-external-file bug.
NeilBrown [Thu, 8 Jan 2009 21:31:05 +0000]
md: fix bitmap-on-external-file bug.

commit a2ed9615e3222645007fc19991aedf30eed3ecfd
fixed a bug with 'internal' bitmaps, but in the process broke
'in a file' bitmaps.  So they are broken in 2.6.28

This fixes it, and needs to go in 2.6.28-stable.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org

11 years agopata_hpt366: reimplement mode programming
Tejun Heo [Thu, 8 Jan 2009 21:29:20 +0000]
pata_hpt366: reimplement mode programming

Reimplement mode programming logic of pata_hpt366 such that it's
identical to that of IDE hpt366 driver.  The differences were...

* pata_hpt366 used 0xCFFF8FFFF to mask pio modes and 0x3FFFFFFF dma
  modes.  IDE hpt366 uses 0xC1F8FFFF for PIO, 0x303800FF for MWDMA and
  0x30070000 for UDMA.

* pata_hpt366 doesn't set 0x08000000 for PIO unless it's already set
  and always turns it on for MWDMA/UDMA.  IDE hpt366 doesn't bother
  with the bit.  It always uses what was there.

* IDE hpt366 always clears 0xC0000000.  pata_hpt366 doesn't.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years ago[libata] pata_hpt3x3: correct _freeze() function declaration
Jeff Garzik [Thu, 8 Jan 2009 21:28:21 +0000]
[libata] pata_hpt3x3: correct _freeze() function declaration

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agolibata: Add special ata_pio_need_iordy() handling for Compact Flash.
David Daney [Wed, 10 Dec 2008 23:39:12 +0000]
libata: Add special ata_pio_need_iordy() handling for Compact Flash.

According to the Compact Flash specification r4.1, PIO modes 5 and 6
do not use iordy.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agopata_platform: __pata_platform_remove() shouldn't be in discard section
Sonic Zhang [Wed, 7 Jan 2009 16:37:12 +0000]
pata_platform: __pata_platform_remove() shouldn't be in discard section

--
  UPD     include/linux/compile.h
`___pata_platform_remove' referenced in section `__ksymtab_gpl' of
drivers/built-in.o: defined in discarded section `.devexit.text' of
drivers/built-in.o
make: *** [.tmp_vmlinux1] Error 1
--

__pata_platform_remove() should not be in discarded section
__pata_platform_remove(struct device *dev) is invoked in both
pata_platform.c and pata_of_platform.c by reomve function defined in
discarded section ".devexit.text". An exported function should not be put
into discarded section.

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agosata_sil24: remove unused sil24_port_multiplier
Grant Grundler [Wed, 7 Jan 2009 02:26:40 +0000]
sata_sil24: remove unused sil24_port_multiplier

AFAICT, struct sil24_port_multiplier isn't used anywhere. Remove it.

Signed-off-by: Grant Grundler <grundler@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years ago[libata] ahci: Add SATA GEN3 related messages
Shane Huang [Tue, 30 Dec 2008 03:00:37 +0000]
[libata] ahci: Add SATA GEN3 related messages

The present AHCI driver seems to support SATA GEN 3 speed, but the related
messages should be modified.

Signed-off-by: Shane Huang <shane.huang@amd.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agoata_piix: save, use saved and restore IOCFG
Tejun Heo [Fri, 2 Jan 2009 03:04:48 +0000]
ata_piix: save, use saved and restore IOCFG

Certain ACPI implementations mess up IOCFG on _STM making libata
detect cable type incorrectly after a suspend/resume cycle.  This
patch makes ata_piix save IOCFG on attach, use the saved value for
things which aren't dynamic and restore it on detach so that the next
driver also gets the BIOS initialized value.

This patch contains the following changes.

* makes ich_pata_cable_detect() use saved_iocfg.

* make piix_iocfg_bit18_quirk() take @host and use saved_iocfg.

* hpriv allocation moved upwards to save iocfg before doing anything
  else.

This fixes bz#11879.  Andreas Mohr reported and diagnosed the problem.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Andreas Mohr <andi@lisas.de>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agopata_ali: Fix and workaround for FIFO DMA bug
Alan Cox [Mon, 5 Jan 2009 14:13:53 +0000]
pata_ali: Fix and workaround for FIFO DMA bug

In very obscure cases this can cause problems. We need to help the hardware
out a bit to avoid DMA problems on a reset.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agopata_ali: force initialise a few bits
Alan Cox [Mon, 5 Jan 2009 14:13:22 +0000]
pata_ali: force initialise a few bits

We can't assume some of the setup here on non x86 boxes.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agopata_hpt3x3: Workarounds for chipset
Alan Cox [Mon, 5 Jan 2009 14:12:51 +0000]
pata_hpt3x3: Workarounds for chipset

Correct the DMA bit flags (UDMA and MWDMA were swapped)
Add workarounds so that we clear ERR and INTR bits before issuing a DMA
Add workarounds so that we stop a live DMA before touching the CTL register

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

11 years agoasync: make async_synchronize_full() more serializing
Arjan van de Ven [Thu, 8 Jan 2009 20:35:11 +0000]
async: make async_synchronize_full() more serializing

turns out that there are real problems with allowing async
tasks that are scheduled from async tasks to run after
the async_synchronize_full() returns.

This patch makes the _full more strict and a complete
synchronization. Later I might need to add back a lighter
form of synchronization for other uses.. but not right now.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agowimax: fix kernel-doc for debufs_dentry member of struct wimax_dev
Inaky Perez-Gonzalez [Thu, 8 Jan 2009 20:56:57 +0000]
wimax: fix kernel-doc for debufs_dentry member of struct wimax_dev

Reported by Randy Dunlap from a warning in the v2.6.29 merge window
tree as of 2009/1/8.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoregulator: fix kernel-doc warnings
Randy Dunlap [Thu, 8 Jan 2009 19:50:23 +0000]
regulator: fix kernel-doc warnings

Fix kernel-doc warnings in regulator/driver.h:

Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'set_current' description in 'regulator_ops'
Warning(linux-next-20090108//include/linux/regulator/driver.h:95): Excess struct/union/enum/typedef member 'get_current' description in 'regulator_ops'
Warning(linux-next-20090108//include/linux/regulator/driver.h:124): No description found for parameter 'irq'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
cc: Liam Girdwood <lrg@slimlogic.co.uk>
cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: catch some registration errors
David Brownell [Wed, 31 Dec 2008 12:54:19 +0000]
regulator: catch some registration errors

Prevent registration of duplicate "struct regulator" names.
They'd be unavailable, and clearly indicate something wrong.

[Edited to remove check for NULL consumer device until we have a
solution for things like cpufreq -- broonie]

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: Add basic DocBook manual
Mark Brown [Wed, 31 Dec 2008 12:52:44 +0000]
regulator: Add basic DocBook manual

Add a basic DocBook manual for the regulator API. This is much more
skeletal than the existing text documentation, the main benefit is to
provide a skeleton for automatic generation of a manual based on the
kerneldoc for the API.

Since large portions of the text are lifted from the existing text format
documentation written by Liam Girdwood much of the credit belongs to
him.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: Fix some kerneldoc rendering issues
Mark Brown [Wed, 31 Dec 2008 12:52:43 +0000]
regulator: Fix some kerneldoc rendering issues

There are some minor textual changes in here as well, mostly to enable()
and disable() but the primary goal of these changes is to fix
misrenderings of the kerneldoc documentation for the regulator API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: Add missing kerneldoc
Mark Brown [Wed, 31 Dec 2008 12:52:42 +0000]
regulator: Add missing kerneldoc

This is only the documentation that the kerneldoc system warns about.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: Clean up kerneldoc warnings
Mark Brown [Wed, 31 Dec 2008 12:52:41 +0000]
regulator: Clean up kerneldoc warnings

Remove kerneldoc warnings that don't relate to missing documentation,
mostly by renaming parameters in the documentation to match their
actual names.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: Remove extraneous kerneldoc annotations
Mark Brown [Wed, 31 Dec 2008 12:52:40 +0000]
regulator: Remove extraneous kerneldoc annotations

Some of the internal structures have no kerneldoc but the ** at the start
of the comment marking them for documentation.  Remove the annotation
until some is added.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: init/link earlier
David Brownell [Tue, 2 Dec 2008 05:50:13 +0000]
regulator: init/link earlier

Move regulator earlier in link sequence.

The regulator core currently initializes as a core_initcall() to be
available early ... but then it links way late, throwing away that
benefit, so regulators available at e.g. subsys_initcall() are not
available to subsystems which need to use them.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: move set_machine_constraints after regulator device initialization
Mike Rapoport [Tue, 25 Nov 2008 12:53:53 +0000]
regulator: move set_machine_constraints after regulator device initialization

Calling set_machine_constraints before regulator device initialization
causes crash when constraints have apply_uV set.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: da903x: make da903x_is_enabled return 0 or 1
Mike Rapoport [Tue, 25 Nov 2008 08:19:52 +0000]
regulator: da903x: make da903x_is_enabled return 0 or 1

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: da903x: add '\n' to error messages
Mike Rapoport [Mon, 24 Nov 2008 16:43:00 +0000]
regulator: da903x: add '\n' to error messages

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: sysfs attribute reduction (v2)
David Brownell [Wed, 12 Nov 2008 01:39:02 +0000]
regulator: sysfs attribute reduction (v2)

Clean up the sysfs interface to regulators by only exposing the
attributes that can be properly displayed.  For example: when a
particular regulator method is needed to display the value, only
create that attribute when that method exists.

This cleaned-up interface is much more comprehensible.  Most
regulators only support a subset of the possible methods, so
often more than half the attributes would be meaningless.  Many
"not defined" values are no longer necessary.  (But handling
of out-of-range values still looks a bit iffy.)

Documentation is updated to reflect that few of the attributes
are *always* present, and to briefly explain why a regulator may
not have a given attribute.

This adds object code, about a dozen bytes more than was removed
by the preceding patch, but saves a bunch of per-regulator data
associated with the now-removed attributes.  So there's a net
reduction in memory footprint.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: code shrink (v2)
David Brownell [Wed, 12 Nov 2008 01:38:53 +0000]
regulator: code shrink (v2)

Shrink regulator core by removing duplication in attribute printing
and probe() cleanup paths.  Saves about 340 bytes (object) on ARM.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: improved mode error checks
David Brownell [Sun, 16 Nov 2008 19:46:56 +0000]
regulator: improved mode error checks

Minor bugfixes in handling of regulator modes:

 - have the routine verifying regulator modes check against
   the set of legal modes (!);

 - have regulator_set_optimum_mode() verify the return value
   of regulator_ops.get_optimum_mode(), like drms_uA_update();

 - one call to regulator_ops.set_mode() treated zero as a
   failure code; make this consistent with other callers.

Both regulator_set_mode() and regulator_set_optimum_mode() now
require valid_ops_mask to include REGULATOR_CHANGE_MODE; that
seems like a bugfix too.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: enable/disable refcounting
David Brownell [Sun, 16 Nov 2008 19:44:46 +0000]
regulator: enable/disable refcounting

Make the <linux/regulator.h> framework treat enable/disable call
pairs like the <linux/clk.h> and <linux/interrupt.h> frameworks do:
they're refcounted, so that different parts of a driver don't need
to put work into coordination that frameworks normally handle.
It's a minor object code shrink.

It also makes the regulator_is_disabled() kerneldoc say what it's
actually returning:  return value is not a refcount, and may report
an error (e.g. I/O error from I2C).

It also fixes some minor regulator_put() goofage:  removing unlocked
access to the enable state.  (But still not making regulator put/get
match the refcounting pattern they invoke.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agoregulator: struct device - replace bus_id with dev_name(), dev_set_name()
Kay Sievers [Sun, 2 Nov 2008 02:55:10 +0000]
regulator: struct device - replace bus_id with dev_name(), dev_set_name()

This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

Thanks,
Kay

From: Kay Sievers <kay.sievers@vrfy.org>
Subject: regulator: struct device - replace bus_id with dev_name(), dev_set_name()

Cc: Liam Girdwood <lrg@slimlogic.co.uk>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>

Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

11 years agonet: convert pegasus driver to net_device_ops
Oliver Neukum [Thu, 8 Jan 2009 19:22:25 +0000]
net: convert pegasus driver to net_device_ops

This converts the pegasus driver to use of the new net_device_ops structure

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agobnx2x: Prevent eeprom set when driver is down
Eilon Greenstein [Thu, 8 Jan 2009 19:21:43 +0000]
bnx2x: Prevent eeprom set when driver is down

Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agonet: switch kaweth driver to netdevops
Oliver Neukum [Thu, 8 Jan 2009 19:20:22 +0000]
net: switch kaweth driver to netdevops

This converts the kaweth ethernet USB driver to netdevops.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agopcnet32: round off carrier watch timer
Stephen Hemminger [Thu, 8 Jan 2009 19:17:13 +0000]
pcnet32: round off carrier watch timer

The link check watchdog timer on this driver fires every two seconds, but
since not aligned it causes extra wakeups. It is more important on this
driver than most because it is the hardware that is emulated by default
when using network interfaces on VMware.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agoi2400m/usb: wrap USB power saving in #ifdef CONFIG_PM
Inaky Perez-Gonzalez [Thu, 8 Jan 2009 19:08:25 +0000]
i2400m/usb: wrap USB power saving in #ifdef CONFIG_PM

Current code was assuming PM was always enabled, which is not
correct. Code which accesses members in the struct usb_device that are
dependant on CONFIG_PM must be protected the same.

Reported by Randy Dunlap from a build error in the linux-next tree on
07/01/2009.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agowimax: testing for rfkill support should also test for CONFIG_RFKILL_MODULE
Inaky Perez-Gonzalez [Thu, 8 Jan 2009 19:08:01 +0000]
wimax: testing for rfkill support should also test for CONFIG_RFKILL_MODULE

Current WiMAX rfkill code is missing the case where rfkill is compiled
in as modules and works only when rfkill is compiled in. This is not
correct. Fixed to test for CONFIG_RFKILL or CONFIG_RKILL_MODULE.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

11 years agowimax: fix kconfig interactions with rfkill and input layers
Inaky Perez-Gonzalez [Thu, 8 Jan 2009 19:07:36 +0000]
wimax: fix kconfig interactions with rfkill and input layers

WiMAX can work without RFKILL, but it was missing a check to make sure
RFKILL is not being made a module with wimax compiled into the
kernel. This caused failed builds in s390, where CONFIG_INPUT is
always off.

When RFKILL is enabled, the code uses the input layer to report
hardware switch changes; thus, if RFKILL is enabled, INPUT has to be
too. It also needs to display some message when INPUT is disabled that
explains why WiMAX is not selectable.

(issues found by Randy Dunlap in the linux-next tree).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>