12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6
Linus Torvalds [Sun, 30 Nov 2008 22:04:31 +0000]
Merge git://git./linux/kernel/git/kyle/parisc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6:
  parisc: struct device - replace bus_id with dev_name(), dev_set_name()
  parisc: fix kernel crash when unwinding a userspace process
  parisc: __kernel_time_t is always long

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Sun, 30 Nov 2008 22:04:02 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] fix regression in cifs_write_begin/cifs_write_end

12 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 Nov 2008 21:06:47 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: prevent divide by zero error in cpu_avg_load_per_task, update
  sched, cpusets: fix warning in kernel/cpuset.c
  sched: prevent divide by zero error in cpu_avg_load_per_task

12 years agoMerge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 30 Nov 2008 21:06:20 +0000]
Merge branch 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  irq.h: fix missing/extra kernel-doc
  genirq: __irq_set_trigger: change pr_warning to pr_debug
  irq: fix typo
  x86: apic honour irq affinity which was set in early boot
  genirq: fix the affinity setting in setup_irq
  genirq: keep affinities set from userspace across free/request_irq()

12 years agoMerge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 Nov 2008 21:05:46 +0000]
Merge branch 'core-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  lockdep: consistent alignement for lockdep info

12 years agoMerge branch 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sun, 30 Nov 2008 21:05:31 +0000]
Merge branch 'tracing-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  ftrace: prevent recursion
  tracing, doc: update mmiotrace documentation
  x86, mmiotrace: fix buffer overrun detection
  function tracing: fix wrong position computing of stack_trace

12 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 30 Nov 2008 21:01:04 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: always define DECLARE_PCI_UNMAP* macros
  x86: fixup config space size of CPU functions for AMD family 11h
  x86, bts: fix wrmsr and spinlock over kmalloc
  x86, pebs: fix PEBS record size configuration
  x86, bts: turn macro into static inline function
  x86, bts: exclude ds.c from build when disabled
  arch/x86/kernel/pci-calgary_64.c: change simple_strtol to simple_strtoul
  x86: use limited register constraint for setnz
  xen: pin correct PGD on suspend
  x86: revert irq number limitation
  x86: fixing __cpuinit/__init tangle, xsave_cntxt_init()
  x86: fix __cpuinit/__init tangle in init_thread_xstate()
  oprofile: fix an overflow in ppro code

12 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Sun, 30 Nov 2008 21:00:21 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Save/restore HWS_PGA on suspend/resume
  drm: move drm vblank initialization/cleanup to driver load/unload
  drm/i915: execbuffer pins objects, no need to ensure they're still in the GTT
  drm/i915: Always read pipestat in irq_handler
  drm/i915: Subtract total pinned bytes from available aperture size
  drm/i915: Avoid BUG_ONs on VT switch with a wedged chipset.
  drm/i915: Remove IMR masking during interrupt handler, and restart it if needed.
  drm/i915: Manage PIPESTAT to control vblank interrupts instead of IMR.

12 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Sun, 30 Nov 2008 20:34:22 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: Fix BUG_ON() in destroy_inode()

12 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Sun, 30 Nov 2008 19:43:41 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] powernow-k8: ignore out-of-range PstateStatus value
  [CPUFREQ] Documentation: Add Blackfin to list of supported processors

12 years agoTrivial Documentation/filesystems/ramfs-rootfs-initramfs.txt fix
frans [Sat, 22 Nov 2008 14:39:06 +0000]
Trivial Documentation/filesystems/ramfs-rootfs-initramfs.txt fix

A very minor patch on ramfs-rootfs-initramfs.txt: update the location
where CONFIG_INITRAMFS_SOURCE lives in menuconfig

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
Acked-by: Rob Landley <rob@landley.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 30 Nov 2008 19:36:57 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Check model for Dell 92HD73xx laptops
  ALSA: hda - mark Dell studio 1535 quirk
  ALSA: hda - No 'Headphone as Line-out' swich without line-outs
  ALSA: hda - Fix AFG power management on IDT 92HD* codecs
  ALSA: hda - Fix caching of SPDIF status bits
  ALSA: hda - Add a quirk for Dell Studio 15
  ALSA: hda: Add STAC_DELL_M4_3 quirk
  sound/sound_core: Fix sparse warnings
  ALSA: hda: STAC_DELL_M6 EAPD

12 years agoMerge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6
Linus Torvalds [Sun, 30 Nov 2008 19:34:17 +0000]
Merge branch 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6

* 'linux-next' of git://git.infradead.org/~dedekind/ubi-2.6:
  UBI: Don't exit from ubi_thread until kthread_should_stop() is true
  UBI: fix EBADMSG handling

12 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Sun, 30 Nov 2008 19:21:43 +0000]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6:
  i2c-parport: Fix misplaced parport_release call
  i2c: Remove i2c clients in reverse order
  i2c/isp1301_omap: Build fixes

12 years agoMN10300: Tighten up the code using case ranges
Robert P. J. Day [Fri, 28 Nov 2008 11:48:37 +0000]
MN10300: Tighten up the code using case ranges

Compress a set of consecutive switch cases into a case-range.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Sun, 30 Nov 2008 19:07:16 +0000]
Merge branch 'for-linus' of git://git390.osdl.marist.edu/linux-2.6

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] Update default configuration.
  [S390] Fix alignment of initial kernel stack.
  [S390] pgtable.h: Fix oops in unmap_vmas for KVM processes
  [S390] fix/cleanup sched_clock
  [S390] fix system call parameter functions.

12 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sun, 30 Nov 2008 19:06:40 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  toshiba_acpi: close race in toshiba_acpi driver
  ACPICA: disable _BIF warning
  ACPI: delete OSI(Linux) DMI dmesg spam
  ACPICA: Allow _WAK method to return an Integer
  ACPI: thinkpad-acpi: fix fan sleep/resume path
  sony-laptop: printk tweak
  sony-laptop: brightness regression fix
  Revert "ACPI: don't enable control method power button as wakeup device when Fixed Power button is used"
  ACPI suspend: Blacklist boxes that require us to set SCI_EN directly on resume
  ACPI: scheduling in atomic via acpi_evaluate_integer ()
  ACPI: battery: Convert discharge energy rate to current properly
  ACPI: EC: count interrupts only if called from interrupt handler.

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Sun, 30 Nov 2008 19:05:21 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - add support for new USB Tablet PCs
  Input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback
  Input: i8042 - add Compal Hel80 laptop to nomux blacklist
  Input: cm109 - add keymap for ATCom AU-100 phone
  Input: fix the example of an input device driver
  Input: psmouse - fix incorrect validate_byte check in OLPC protocol
  Input: atkbd - cancel delayed work before freeing its structure
  Input: atkbd - add keymap quirk for Inventec Symphony systems
  Input: i8042 - add Dell XPS M1530 to nomux list
  Input: elo - fix format string in elo driver

12 years agoremove __ARCH_WANT_COMPAT_SYS_PTRACE
Christoph Hellwig [Tue, 25 Nov 2008 07:10:03 +0000]
remove __ARCH_WANT_COMPAT_SYS_PTRACE

All architectures now use the generic compat_sys_ptrace, as should every
new architecture that needs 32bit compat (if we'll ever get another).

Remove the now superflous __ARCH_WANT_COMPAT_SYS_PTRACE define, and also
kill a comment about __ARCH_SYS_PTRACE that was added after
__ARCH_SYS_PTRACE was already gone.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Sun, 30 Nov 2008 18:38:22 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Make BUG() __noreturn.

12 years agoinput: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback
Arjan van de Ven [Mon, 24 Nov 2008 00:57:36 +0000]
input: replace spin_lock_bh with spin_lock_irqsave in ml_ff_playback

ml_ff_playback() uses spin_(un)lock_bh. However this function is called
with interrupts disabled from erase_effect() in drivers/input/ff-core.c:196.

This is not permitted, and will result in a WARN_ON in the bottom half handling code.
This patch changes this function to just use spin_lock_irqsave() instead, solving
the problem and simplifying the locking logic.

This was reported as entry #106559 in kerneloops.org

Reported-by: kerneloops.org
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agohotplug_memory_notifier section annotation
Al Viro [Sat, 22 Nov 2008 17:38:34 +0000]
hotplug_memory_notifier section annotation

Same as for hotplug_cpu - we want static notifier_block in there in meminitdata,
to avoid false positives whenever it's used.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosn_pci_controller_fixup() should be __init
Al Viro [Sat, 22 Nov 2008 17:38:24 +0000]
sn_pci_controller_fixup() should be __init

called only from __init

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoget xenbus_driver ->probe() "recognized" by modpost
Al Viro [Sat, 22 Nov 2008 17:38:14 +0000]
get xenbus_driver ->probe() "recognized" by modpost

... by giving the instances' names magic suffix recognized by modpost ;-/
Their ->probe() is __devinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoxen_play_dead() is __cpuinit
Al Viro [Sat, 22 Nov 2008 17:38:04 +0000]
xen_play_dead() is __cpuinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoxen_setup_vcpu_info_placement() is not init on x86
Al Viro [Sat, 22 Nov 2008 17:37:54 +0000]
xen_setup_vcpu_info_placement() is not init on x86

... so get xen-ops.h in agreement with xen/smp.c

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agokvm_setup_secondary_clock() is cpuinit
Al Viro [Sat, 22 Nov 2008 17:37:44 +0000]
kvm_setup_secondary_clock() is cpuinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoenable_IR_x2apic() needs to be __init
Al Viro [Sat, 22 Nov 2008 17:37:34 +0000]
enable_IR_x2apic() needs to be __init

calls __init, called only from __init

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopci_setup() is init, not devinit
Al Viro [Sat, 22 Nov 2008 17:37:14 +0000]
pci_setup() is init, not devinit

for fsck sake, it's used only when parsing kernel command line...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoalpha: pcibios_resource_to_bus() is callable from normal code
Al Viro [Sat, 22 Nov 2008 17:37:04 +0000]
alpha: pcibios_resource_to_bus() is callable from normal code

pci_enable_rom(), specifically.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agotricky one: hisax sections
Al Viro [Sat, 22 Nov 2008 17:36:54 +0000]
tricky one: hisax sections

a) hisax_init_pcmcia() needs to be defined only if we have
   CONFIG_HOTPLUG (no PCMCIA support otherwise) and can be declared
   __devinit.

b) HiSax_inithardware() can go __init

c) hisax_register() is passing to checkcard() full-blown hisax_cs_setup_card():
checkcard(i, id, NULL, hisax_d_if->owner, hisax_cs_setup_card);
   The problem with it is that
* hisax_cs_setup_card() is __devinit
* hisax_register() is not
* hisax_cs_setup_card() is a switch from hell, calling a lot of
  setup_some_weirdcard() depending on card->typ.  _These_ are also
  __devinit.

   However, in hisax_register() we have card->typ equal to
   ISDN_CTYPE_DYNAMIC, which reduces hisax_cs_setup_card() to "nevermind
   all that crap, just do nothing and return 2".  So we add a
   trimmed-down callback doing just that and passed to checkcard() by
   hisax_register().  _This_ is non-init (we can stand the impact on
   .text size).

Voila - no section warnings from drivers/isdn

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agocpuinit fixes in kernel/*
Al Viro [Sat, 22 Nov 2008 17:36:44 +0000]
cpuinit fixes in kernel/*

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agouninorth-agp section mess
Al Viro [Sat, 22 Nov 2008 17:36:34 +0000]
uninorth-agp section mess

'aperture' is declared devinitdata (the whole word of it) and
is used from ->fetch_size() which can, AFAICS, be used on
!HOTPLUG after init time.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agorapidio section noise
Al Viro [Sat, 22 Nov 2008 17:36:24 +0000]
rapidio section noise

functions calling devinit and called only from devinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosection errors in smc911x/smc91x
Al Viro [Sat, 22 Nov 2008 17:36:14 +0000]
section errors in smc911x/smc91x

a) ->probe() can be __devinit; no need to put it into .text
 b) calling __init stuff from it, OTOH, is wrong
 c) ->remove() is __devexit fodder

Acked-by: rmk+kernel@arm.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofix the section noise in sparc head.S
Al Viro [Sat, 22 Nov 2008 17:36:04 +0000]
fix the section noise in sparc head.S

usual .text.head trick

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agom32r: section noise in head.S
Al Viro [Sat, 22 Nov 2008 17:35:54 +0000]
m32r: section noise in head.S

usual "introduce .text.head, put it in front of TEXT_TEXT in vmlinux.lds.S,
make the stuff up to jump to start_kernel live in it", same as on other
targets.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosection misannotation in ibmtr_cs
Al Viro [Sat, 22 Nov 2008 17:35:44 +0000]
section misannotation in ibmtr_cs

ibmtr_resume() is calling ibmtr_probe(), which is devinit.  Whether
that's the right thing to do there is a separate question, but
since it's PCMCIA and thus will never compile without HOTPLUG...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoixgbe section fixes
Al Viro [Sat, 22 Nov 2008 17:35:34 +0000]
ixgbe section fixes

ixgbe_init_interrupt_scheme() is called from ixgbe_resume().  Build that
with CONFIG_PM and without CONFIG_HOTPLUG and you've got a problem.
Several helpers called by it also are misannotated __devinit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agorackmeter section fixes
Al Viro [Sat, 22 Nov 2008 17:35:24 +0000]
rackmeter section fixes

* rackmeter_remove() reference needs devexit_p
 * rackmeter_setup() is calls devinit and is called only from devinit

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agogdth section fixes
Al Viro [Sat, 22 Nov 2008 17:35:14 +0000]
gdth section fixes

PCI side of driver should be devinit, not init

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoof_platform_driver noise on sparce
Al Viro [Sat, 22 Nov 2008 17:35:04 +0000]
of_platform_driver noise on sparce

switch to __init for those; unlike powerpc sparc has no hotplug support
for that stuff and their ->probe() tends to call __init functions while
being declared __devinit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoadvansys fix on ISA-less configs
Al Viro [Sat, 22 Nov 2008 17:34:54 +0000]
advansys fix on ISA-less configs

The code

        if (shost->dma_channel != NO_ISA_DMA)
                free_dma(shost->dma_channel);

in there is triggerable only if we have CONFIG_ISA (we only set ->dma_channel to
something other than NO_ISA_DMA under #ifdef CONFIG_ISA).  OTOH, free_dma() is
not guaranteed to be there in absense of CONFIG_ISA.  IOW, driver runs into
undefined symbols on PCI-but-not-ISA configs (e.g. on frv) and it's a false
positive.

Fix: put the entire if () under #ifdef CONFIG_ISA; behaviour doesn't change and
dependency on free_dma() disappears for !CONFIG_ISA.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoW1_MASTER_DS1WM should depend on HAVE_CLK
Al Viro [Sat, 22 Nov 2008 17:34:44 +0000]
W1_MASTER_DS1WM should depend on HAVE_CLK

Uses clk_...() a lot

Acked-by: rmk+kernel@arm.linux.org.uk
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoicside section warnings
Al Viro [Sat, 22 Nov 2008 17:34:34 +0000]
icside section warnings

icside_register_v[56] is called from (__devinit) icside_probe

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofix talitos
Al Viro [Sat, 22 Nov 2008 17:34:24 +0000]
fix talitos

talitos_remove() can be called from talitos_probe() on failure
exit path, so it can't be __devexit.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoistallion section warnings
Al Viro [Sat, 22 Nov 2008 17:34:14 +0000]
istallion section warnings

stli_findeisabrds() and stli_initbrds() are using __init and called only
from __init.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosparc64 trivial section misannotations
Al Viro [Sat, 22 Nov 2008 17:34:04 +0000]
sparc64 trivial section misannotations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosparc32 cpuinit flase positives
Al Viro [Sat, 22 Nov 2008 17:33:54 +0000]
sparc32 cpuinit flase positives

All noise since we don't have CPU hotplug there.  However, they
did expose something very odd-looking in there - poke_viking()
does a bunch of identical btfixup each time it's called (i.e.
for each CPU).  That one is left alone for now; just the trivial
misannotation fixes.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agopowerpc set_huge_psize() false positive
Al Viro [Sat, 22 Nov 2008 17:33:44 +0000]
powerpc set_huge_psize() false positive

called only from __init, calls __init.  Incidentally, it ought to be static
in file.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofalse __cpuinit positives on alpha
Al Viro [Sat, 22 Nov 2008 17:33:34 +0000]
false __cpuinit positives on alpha

pure noise - alpha doesn't have CPU hotplug

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomeminit section warnings
Al Viro [Sat, 22 Nov 2008 17:33:24 +0000]
meminit section warnings

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agosched: prevent divide by zero error in cpu_avg_load_per_task, update
Ingo Molnar [Sat, 29 Nov 2008 19:45:15 +0000]
sched: prevent divide by zero error in cpu_avg_load_per_task, update

Regarding the bug addressed in:

  4cd4262: sched: prevent divide by zero error in cpu_avg_load_per_task

Linus points out that the fix is not complete:

> There's nothing that keeps gcc from deciding not to reload
> rq->nr_running.
>
> Of course, in _practice_, I don't think gcc ever will (if it decides
> that it will spill, gcc is likely going to decide that it will
> literally spill the local variable to the stack rather than decide to
> reload off the pointer), but it's a valid compiler optimization, and
> it even has a name (rematerialization).
>
> So I suspect that your patch does fix the bug, but it still leaves the
> fairly unlikely _potential_ for it to re-appear at some point.
>
> We have ACCESS_ONCE() as a macro to guarantee that the compiler
> doesn't rematerialize a pointer access. That also would clarify
> the fact that we access something unsafe outside a lock.

So make sure our nr_running value is immutable and cannot change
after we check it for nonzero.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agosched, cpusets: fix warning in kernel/cpuset.c
Ingo Molnar [Tue, 25 Nov 2008 09:27:49 +0000]
sched, cpusets: fix warning in kernel/cpuset.c

this warning:

  kernel/cpuset.c: In function ‘generate_sched_domains’:
  kernel/cpuset.c:588: warning: ‘ndoms’ may be used uninitialized in this function

triggers because GCC does not recognize that ndoms stays uninitialized
only if doms is NULL - but that flow is covered at the end of
generate_sched_domains().

Help out GCC by initializing this variable to 0. (that's prudent anyway)

Also, this function needs a splitup and code flow simplification:
with 160 lines length it's clearly too long.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agotoshiba_acpi: close race in toshiba_acpi driver
Arjan van de Ven [Fri, 28 Nov 2008 16:19:09 +0000]
toshiba_acpi: close race in toshiba_acpi driver

the toshiba ACPI driver will, in a failure case, free the rfkill state
before stopping the polling timer that would use this state. More interesting,
in the same failure case handling, it calls the exit function, which also
frees the rfkill state, but after stopping the polling.

If the race happens, a NULL pointer is passed to rfkill_force_state()
which then causes a nice dereference.

Fix the race by just not doing the too-early freeing of the rfkill state.

This appears to be the cause of a hot issue on kerneloops.org; while I
have no solid evidence of that this patch will fix the issue, the race
appears rather real.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoi2c-parport: Fix misplaced parport_release call
Jean Delvare [Fri, 28 Nov 2008 14:24:39 +0000]
i2c-parport: Fix misplaced parport_release call

We shouldn't release the parallel port until we are actually done with
it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoi2c: Remove i2c clients in reverse order
Jean Delvare [Fri, 28 Nov 2008 14:24:38 +0000]
i2c: Remove i2c clients in reverse order

i2c clients should be removed in reverse order compared to the probe
(actually: bind) order. This matters when several clients depend on
each other.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

12 years agoi2c/isp1301_omap: Build fixes
David Brownell [Fri, 28 Nov 2008 14:24:38 +0000]
i2c/isp1301_omap: Build fixes

Build fixes for isp1301_omap; no behavior changes:

  - fix incorrect probe() signature (it changed many months ago)
  - provide missing functions on H3 and H4 boards
  - "sparse" fixes (static, NULL-vs-0)

The H3 build bits subset some of the stuff that was previously in
the OMAP tree but never went to mainline.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

12 years agoudf: Fix BUG_ON() in destroy_inode()
Jan Kara [Tue, 23 Sep 2008 16:24:08 +0000]
udf: Fix BUG_ON() in destroy_inode()

udf_clear_inode() can leave behind buffers on mapping's i_private list (when
we truncated preallocation). Call invalidate_inode_buffers() so that the list
is properly cleaned-up before we return from udf_clear_inode(). This is ugly
and suggest that we should cleanup preallocation earlier than in clear_inode()
but currently there's no such call available since drop_inode() is called under
inode lock and thus is unusable for disk operations.

Signed-off-by: Jan Kara <jack@suse.cz>

12 years agox86: always define DECLARE_PCI_UNMAP* macros
Joerg Roedel [Thu, 20 Nov 2008 19:49:56 +0000]
x86: always define DECLARE_PCI_UNMAP* macros

Impact: fix boot crash on AMD IOMMU if CONFIG_GART_IOMMU is off

Currently these macros evaluate to a no-op except the kernel is compiled
with GART or Calgary support. But we also need these macros when we have
SWIOTLB, VT-d or AMD IOMMU in the kernel. Since we always compile at
least with SWIOTLB we can define these macros always.

This patch is also for stable backport for the same reason the SWIOTLB
default selection patch is.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Cc: <stable@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years ago[S390] Update default configuration.
Martin Schwidefsky [Thu, 27 Nov 2008 10:05:59 +0000]
[S390] Update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] Fix alignment of initial kernel stack.
Heiko Carstens [Thu, 27 Nov 2008 10:05:58 +0000]
[S390] Fix alignment of initial kernel stack.

We need an alignment of 16384 bytes for the initial kernel stack if
the kernel is configured for 16384 bytes stacks but the linker script
currently guarantees only an alignment of 8192 bytes.

So fix this and simply use THREAD_SIZE as alignment value which will
always do the right thing.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] pgtable.h: Fix oops in unmap_vmas for KVM processes
Christian Borntraeger [Thu, 27 Nov 2008 10:05:57 +0000]
[S390] pgtable.h: Fix oops in unmap_vmas for KVM processes

When running several kvm processes with lots of memory overcommitment,
we have seen an oops during process shutdown:
------------[ cut here ]------------
Kernel BUG at 0000000000193434 [verbose debug info unavailable]
addressing exception: 0005 [#1] PREEMPT SMP
Modules linked in: kvm sunrpc qeth_l2 dm_mod qeth ccwgroup
CPU: 10 Not tainted 2.6.28-rc4-kvm-bigiron-00521-g0ccca08-dirty #8
Process kuli (pid: 14460, task: 0000000149822338, ksp: 0000000024f57650)
Krnl PSW : 0704e00180000000 0000000000193434 (unmap_vmas+0x884/0xf10)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 EA:3
Krnl GPRS: 0000000000000002 0000000000000000 000000051008d000 000003e05e6034e0
           00000000001933f6 00000000000001e9 0000000407259e0a 00000002be88c400
           00000200001c1000 0000000407259608 0000000407259e08 0000000024f577f0
           0000000407259e09 0000000000445fa8 00000000001933f6 0000000024f577f0
Krnl Code: 0000000000193426: eb22000c000d sllg %r2,%r2,12
           000000000019342c: a7180000 lhi %r1,0
           0000000000193430: b2290012 iske %r1,%r2
          >0000000000193434: a7110002 tmll %r1,2
           0000000000193438: a7840006 brc 8,193444
           000000000019343c: 9602c000 oi 0(%r12),2
           0000000000193440: 96806000 oi 0(%r6),128
           0000000000193444: a7110004 tmll %r1,4
Call Trace:
([<00000000001933f6>] unmap_vmas+0x846/0xf10)
[<0000000000199680>] exit_mmap+0x210/0x458
[<000000000012a8f8>] mmput+0x54/0xfc
[<000000000012f714>] exit_mm+0x134/0x144
[<000000000013120c>] do_exit+0x240/0x878
[<00000000001318dc>] do_group_exit+0x98/0xc8
[<000000000013e6b0>] get_signal_to_deliver+0x30c/0x358
[<000000000010bee0>] do_signal+0xec/0x860
[<0000000000112e30>] sysc_sigpending+0xe/0x22
[<000002000013198a>] 0x2000013198a
INFO: lockdep is turned off.
Last Breaking-Event-Address:
[<00000000001a68d0>] free_swap_and_cache+0x1a0/0x1a4
<4>---[ end trace bc19f1d51ac9db7c ]---

The faulting instruction is the storage key operation (iske) in
ptep_rcp_copy (called by pte_clear, called by unmap_vmas). iske
reads dirty and reference bit information for a physical page and
requires a valid physical address. Since we are in pte_clear, we
cannot rely on the pte containing a valid address. Fortunately we
dont need these information in pte_clear - after all there is no
mapping. The best fix is to remove the needless call to ptep_rcp_copy
that contains the iske.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] fix/cleanup sched_clock
Christian Borntraeger [Thu, 27 Nov 2008 10:05:56 +0000]
[S390] fix/cleanup sched_clock

CONFIG_PRINTK_TIME reveals that sched_clock has a wrong offset during boot:
..
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 775679
[    0.000000] Kernel command line: dasd=4b6c root=/dev/dasda1 ro noinitrd
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[6920575.975232] console [ttyS0] enabled
[6920575.987586] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[6920575.991404] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
..

The s390 implementation of sched_clock uses the store clock instruction and
subtracts jiffies_timer_cc.
jiffies_timer_cc is a local variable in arch/s390/kernel/time.c and only used
for sched_clock and monotonic clock. For historical reasons there is an offset
on that value. With todays code this offset is unnecessary. By removing that
offset we can get a sched_clock which returns the nanoseconds after time_init.
This improves CONFIG_PRINTK_TIME.

Since sched_clock is the only user, I have also renamed jiffies_timer_cc to
sched_clock_base_cc. In addition, the local variable init_timer_cc is redundant
and can be romved as well.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years ago[S390] fix system call parameter functions.
Martin Schwidefsky [Thu, 27 Nov 2008 10:05:55 +0000]
[S390] fix system call parameter functions.

syscall_get_nr() currently returns a valid result only if the call
chain of the traced process includes do_syscall_trace_enter(). But
collect_syscall() can be called for any sleeping task, the result of
syscall_get_nr() in general is completely bogus.

To make syscall_get_nr() work for any sleeping task the traps field
in pt_regs is replace with svcnr - the system call number the process
is executing. If svcnr == 0 the process is not on a system call path.

The syscall_get_arguments and syscall_set_arguments use regs->gprs[2]
for the first system call parameter. This is incorrect since gprs[2]
may have been overwritten with the system call number if the call
chain includes do_syscall_trace_enter. Use regs->orig_gprs2 instead.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

12 years agosched: prevent divide by zero error in cpu_avg_load_per_task
Steven Rostedt [Thu, 27 Nov 2008 02:04:24 +0000]
sched: prevent divide by zero error in cpu_avg_load_per_task

Impact: fix divide by zero crash in scheduler rebalance irq

While testing the branch profiler, I hit this crash:

divide error: 0000 [#1] PREEMPT SMP
[...]
RIP: 0010:[<ffffffff8024a008>]  [<ffffffff8024a008>] cpu_avg_load_per_task+0x50/0x7f
[...]
Call Trace:
 <IRQ> <0> [<ffffffff8024fd43>] find_busiest_group+0x3e5/0xcaa
 [<ffffffff8025da75>] rebalance_domains+0x2da/0xa21
 [<ffffffff80478769>] ? find_next_bit+0x1b2/0x1e6
 [<ffffffff8025e2ce>] run_rebalance_domains+0x112/0x19f
 [<ffffffff8026d7c2>] __do_softirq+0xa8/0x232
 [<ffffffff8020ea7c>] call_softirq+0x1c/0x3e
 [<ffffffff8021047a>] do_softirq+0x94/0x1cd
 [<ffffffff8026d5eb>] irq_exit+0x6b/0x10e
 [<ffffffff8022e6ec>] smp_apic_timer_interrupt+0xd3/0xff
 [<ffffffff8020e4b3>] apic_timer_interrupt+0x13/0x20

The code for cpu_avg_load_per_task has:

if (rq->nr_running)
rq->avg_load_per_task = rq->load.weight / rq->nr_running;

The runqueue lock is not held here, and there is nothing that prevents
the rq->nr_running from going to zero after it passes the if condition.

The branch profiler simply made the race window bigger.

This patch saves off the rq->nr_running to a local variable and uses that
for both the condition and the division.

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoftrace: prevent recursion
Lai Jiangshan [Thu, 27 Nov 2008 02:21:46 +0000]
ftrace: prevent recursion

Impact: prevent unnecessary stack recursion

if the resched flag was set before we entered, then don't reschedule.

Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoACPICA: disable _BIF warning
Lin Ming [Thu, 27 Nov 2008 06:42:30 +0000]
ACPICA: disable _BIF warning

A generic work-around from ACPICA is in the queue,
but since Linux has a work-around in its battery
driver, we can disable this warning now.

Allow _BIF method to return an Package with Buffer elements

http://bugzilla.kernel.org/show_bug.cgi?id=11822

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoACPI: delete OSI(Linux) DMI dmesg spam
Len Brown [Sat, 8 Nov 2008 06:21:10 +0000]
ACPI: delete OSI(Linux) DMI dmesg spam

Linux will continue to ignore OSI(Linux),
except for a white-list containing a few systems.

So delete the black-list,
and stop soliciting user-feedback on the console.

Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoACPICA: Allow _WAK method to return an Integer
Bob Moore [Thu, 13 Nov 2008 03:01:34 +0000]
ACPICA: Allow _WAK method to return an Integer

This can happen if the _WAK method returns nothing (as per ACPI
1.0) but does return an integer if the implicit return mechanism
is enabled.  This is the only method that has this problem,
since it is also defined to return a package of two integers
(ACPI 1.0b+). In all other cases, if a method returns an object
when one was not expected, no warning is issued.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoACPI: thinkpad-acpi: fix fan sleep/resume path
Henrique de Moraes Holschuh [Sun, 9 Nov 2008 12:54:02 +0000]
ACPI: thinkpad-acpi: fix fan sleep/resume path

This fixes a regression from v2.6.27, caused by commit
5814f737e1cd2cfa2893badd62189acae3e1e1fd, "ACPI: thinkpad-acpi:
attempt to preserve fan state on resume".

It is possible for fan_suspend() to fail to properly initialize
fan_control_desired_level as required by fan_resume(), resulting on
the fan always being set to level 7 on resume if the user didn't
touch the fan controller.

In order to get fan sleep/resume handling to work right:

1. Fix the fan_suspend handling of the T43 firmware quirk. If it is
still undefined, we didn't touch the fan yet and that means we have no
business doing it on resume.

2. Store the fan level on its own variable to avoid any possible
issues with hijacking fan_control_desired_level (which isn't supposed
to have anything other than 0-7 in it, anyway).

3. Change the fan_resume code to me more straightforward to understand
(although we DO optimize the boolean logic there, otherwise it looks
disgusting).

4. Add comments to help understand what the code is supposed to be
doing.

5. Change fan_set_level to be less strict about how auto and
full-speed modes are requested.

http://bugzilla.kernel.org/show_bug.cgi?id=11982

Signed-off-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Reported-by: Tino Keitel <tino.keitel@tikei.de>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agosony-laptop: printk tweak
Alessandro Guido [Wed, 12 Nov 2008 22:13:35 +0000]
sony-laptop: printk tweak

There's no need to print "Sony: " just after "sony-laptop: " (DRV_PFX).

Signed-off-by: Alessandro Guido <ag@alessandroguido.name>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agosony-laptop: brightness regression fix
Alessandro Guido [Wed, 12 Nov 2008 22:03:28 +0000]
sony-laptop: brightness regression fix

After commit 540b8bb9c33935183ceb5bed466a42ad72b2af56:

  sony-laptop: fingers off backlight if video.ko is serving this functionality

I can't set brightness on my sony laptop (nothing in /sys/class/backlight).
dmesg says "sony-laptop: Sony: Brightness ignored, must be controlled by ACPI
video driver".

The function acpi_video_backlight_support returns 0 if we should use the
vendor-specific backlight support, while non-0 if the ACPI generic should
be used. Because of this, the check introduced by the said commit appears
reversed.

Signed-off-by: Alessandro Guido <ag@alessandroguido.name>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoRevert "ACPI: don't enable control method power button as wakeup device when Fixed...
Len Brown [Wed, 26 Nov 2008 22:55:15 +0000]
Revert "ACPI: don't enable control method power button as wakeup device when Fixed Power button is used"

This reverts commit faee816b1502385dc9bc5abf2960d1cc645844d1.

http://bugzilla.kernel.org/show_bug.cgi?id=12091

Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoACPI suspend: Blacklist boxes that require us to set SCI_EN directly on resume
Rafael J. Wysocki [Wed, 26 Nov 2008 22:53:13 +0000]
ACPI suspend: Blacklist boxes that require us to set SCI_EN directly on resume

Some Apple boxes evidently require us to set SCI_EN on resume
directly, because if we don't do that, they hung somewhere in the
resume code path.  Moreover, on these boxes it is not sufficient to
use acpi_enable() to turn ACPI on during resume.  All of this is
against the ACPI specification which states that (1) the BIOS is
supposed to return from the S3 sleep state with ACPI enabled
(SCI_EN set) and (2) the SCI_EN bit is owned by the hardware and we
are not supposed to change it.

For this reason, blacklist the affected systems so that the SCI_EN
bit is set during resume on them.

[NOTE: Unconditional setting SCI_EN for all system on resume doesn't
 work, because it makes some other systems crash (that's to be
 expected).  Also, it is not entirely clear right now if all of the
 Apple boxes require this workaround.]

This patch fixes the recent regression tracked as
http://bugzilla.kernel.org/show_bug.cgi?id=12038

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Tino Keitel <tino.keitel@gmx.de>
Tested-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoACPI: scheduling in atomic via acpi_evaluate_integer ()
Pavel Machek [Tue, 25 Nov 2008 11:05:08 +0000]
ACPI: scheduling in atomic via acpi_evaluate_integer ()

Now I know why I had strange "scheduling in atomic" problems:
acpi_evaluate_integer() does malloc(..., irqs_disabled() ? GFP_ATOMIC
: GFP_KERNEL)... which is (of course) broken.

There's no way to reliably tell if we need GFP_ATOMIC or not from
code, this one for example fails to detect spinlocks held.

Fortunately, allocation seems small enough to be done on stack.

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoACPI: battery: Convert discharge energy rate to current properly
Alexey Starikovskiy [Fri, 21 Nov 2008 14:41:01 +0000]
ACPI: battery: Convert discharge energy rate to current properly

ACPI battery interface reports its state either in mW or in mA, and
discharge rate in your case is reported in mW. power_supply interface
does not have such a parameter, so current_now parameter is used
for all cases. But in case of mW, reported discharge should
be converted into mA.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Tested-by: Ferenc Wagner <wferi@niif.hu>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years agoparisc: struct device - replace bus_id with dev_name(), dev_set_name()
Kay Sievers [Fri, 7 Nov 2008 00:42:46 +0000]
parisc: struct device - replace bus_id with dev_name(), dev_set_name()

(I did not compile or test it, please let me know, or help fixing
 it, if something is wrong with the conversion)

This patch is part of a larger patch series which will remove
the "char bus_id[20]" name string from struct device. The device
name is managed in the kobject anyway, and without any size
limitation, and just needlessly copied into "struct device".

To set and read the device name dev_name(dev) and dev_set_name(dev)
must be used. If your code uses static kobjects, which it shouldn't
do, "const char *init_name" can be used to statically provide the
name the registered device should have. At registration time, the
init_name field is cleared, to enforce the use of dev_name(dev) to
access the device name at a later time.

We need to get rid of all occurrences of bus_id in the entire tree
to be able to enable the new interface. Please apply this patch,
and possibly convert any remaining remaining occurrences of bus_id.

We want to submit a patch to -next, which will remove bus_id from
"struct device", to find the remaining pieces to convert, and finally
switch over to the new api, which will remove the 20 bytes array
and does no longer have a size limitation.

Thanks,
Kay

Cc: Matthew Wilcox <matthew@wil.cx>
Cc: linux-parisc@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

12 years agoparisc: fix kernel crash when unwinding a userspace process
Helge Deller [Wed, 26 Nov 2008 20:46:22 +0000]
parisc: fix kernel crash when unwinding a userspace process

Any user on existing parisc 32- and 64bit-kernels can easily crash
the kernel and as such enforce a DSO.
A simple testcase is available here:
        http://gsyprf10.external.hp.com/~deller/crash.tgz

The problem is introduced by the fact, that the handle_interruption()
crash handler calls the show_regs() function, which in turn tries to
unwind the stack by calling parisc_show_stack().  Since the stack contains
userspace addresses, a try to unwind the stack is dangerous and useless
and leads to the crash.

The fix is trivial: For userspace processes
a) avoid to unwind the stack, and
b) avoid to resolve userspace addresses to kernel symbol names.

While touching this code, I converted print_symbol() to %pS
printk formats and made parisc_show_stack() static.

An initial patch for this was written by Kyle McMartin back in August:
http://marc.info/?l=linux-parisc&m=121805168830283&w=2

Compile and run-tested with a 64bit parisc kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x, 2.6.27.x, earlier...]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

12 years agoparisc: __kernel_time_t is always long
Geert Uytterhoeven [Sun, 16 Nov 2008 11:04:13 +0000]
parisc: __kernel_time_t is always long

__kernel_time_t is always long on PA-RISC, irrespective of CONFIG_64BIT,
hence move it out of the #ifdef CONFIG_64BIT / #else / #endif block.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>

12 years agoACPI: EC: count interrupts only if called from interrupt handler.
Alexey Starikovskiy [Thu, 13 Nov 2008 09:00:03 +0000]
ACPI: EC: count interrupts only if called from interrupt handler.

fix 2.6.28 EC interrupt storm regression

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

12 years ago[CIFS] fix regression in cifs_write_begin/cifs_write_end
Jeff Layton [Wed, 26 Nov 2008 19:32:33 +0000]
[CIFS] fix regression in cifs_write_begin/cifs_write_end

The conversion to write_begin/write_end interfaces had a bug where we
were passing a bad parameter to cifs_readpage_worker. Rather than
passing the page offset of the start of the write, we needed to pass the
offset of the beginning of the page. This was reliably showing up as
data corruption in the fsx-linux test from LTP.

It also became evident that this code was occasionally doing unnecessary
read calls. Optimize those away by using the PG_checked flag to indicate
that the unwritten part of the page has been initialized.

CC: Nick Piggin <npiggin@suse.de>
Acked-by: Dave Kleikamp <shaggy@us.ibm.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

12 years agoInput: wacom - add support for new USB Tablet PCs
Ping Cheng [Mon, 24 Nov 2008 16:44:27 +0000]
Input: wacom - add support for new USB Tablet PCs

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

12 years agodrm/i915: Save/restore HWS_PGA on suspend/resume
Peng Li [Tue, 18 Nov 2008 04:39:02 +0000]
drm/i915: Save/restore HWS_PGA on suspend/resume

It fixes suspend/resume failure of xf86-video-intel dri2
branch. As dri2 branch doesn't call I830DRIResume() to restore
hardware status page anymore, we need to preserve
this register across suspend/resume.

Signed-off-by: Peng Li <peng.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

12 years agox86: fixup config space size of CPU functions for AMD family 11h
Andreas Herrmann [Tue, 25 Nov 2008 16:18:03 +0000]
x86: fixup config space size of CPU functions for AMD family 11h

Impact: extend allowed configuration space access on 11h CPUs from 256 to 4K

Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years ago[CPUFREQ] powernow-k8: ignore out-of-range PstateStatus value
Andreas Herrmann [Fri, 21 Nov 2008 13:49:25 +0000]
[CPUFREQ] powernow-k8: ignore out-of-range PstateStatus value

A workaround for AMD CPU family 11h erratum 311 might cause that the
P-state Status Register shows a "current P-state" which is larger than
the "current P-state limit" in P-state Current Limit Register. For the
wrong P-state value there is no ACPI _PSS object defined and
powernow-k8/cpufreq can't determine the proper CPU frequency for that
state.

As a consequence this can cause a panic during boot (potentially with
all recent kernel versions -- at least I have reproduced it with
various 2.6.27 kernels and with the current .28 series), as an
example:

powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 \
)
powernow-k8:    0 : pstate 0 (2200 MHz)
powernow-k8:    1 : pstate 1 (1100 MHz)
powernow-k8:    2 : pstate 2 (600 MHz)
BUG: unable to handle kernel paging request at ffff88086e7528b8
IP: [<ffffffff80486361>] cpufreq_stats_update+0x4a/0x5f
PGD 202063 PUD 0
Oops: 0002 [#1] SMP
last sysfs file:
CPU 1
Modules linked in:
Pid: 1, comm: swapper Not tainted 2.6.28-rc3-dirty #16
RIP: 0010:[<ffffffff80486361>]  [<ffffffff80486361>] cpufreq_stats_update+0x4a/0\
f
Synaptics claims to have extended capabilities, but I'm not able to read them.<6\
6
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88006e7528c0
RDX: 00000000ffffffff RSI: ffff88006e54af00 RDI: ffffffff808f056c
RBP: 00000000fffee697 R08: 0000000000000003 R09: ffff88006e73f080
R10: 0000000000000001 R11: 00000000002191c0 R12: ffff88006fb83c10
R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88006fb50740(0000) knlGS:0000000000000000
Unable to initialize Synaptics hardware.
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffff88086e7528b8 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process swapper (pid: 1, threadinfo ffff88006fb82000, task ffff88006fb816d0)
Stack:
 ffff88006e74da50 0000000000000000 ffff88006e54af00 ffffffff804863c7
 ffff88006e74da50 0000000000000000 00000000ffffffff 0000000000000000
 ffff88006fb83c10 ffffffff8024b46c ffffffff808f0560 ffff88006fb83c10
Call Trace:
 [<ffffffff804863c7>] ? cpufreq_stat_notifier_trans+0x51/0x83
 [<ffffffff8024b46c>] ? notifier_call_chain+0x29/0x4c
 [<ffffffff8024b561>] ? __srcu_notifier_call_chain+0x46/0x61
 [<ffffffff8048496d>] ? cpufreq_notify_transition+0x93/0xa9
 [<ffffffff8021ab8d>] ? powernowk8_target+0x1e8/0x5f3
 [<ffffffff80486687>] ? cpufreq_governor_performance+0x1b/0x20
 [<ffffffff80484886>] ? __cpufreq_governor+0x71/0xa8
 [<ffffffff80484b21>] ? __cpufreq_set_policy+0x101/0x13e
 [<ffffffff80485bcd>] ? cpufreq_add_dev+0x3f0/0x4cd
 [<ffffffff8048577a>] ? handle_update+0x0/0x8
 [<ffffffff803c2062>] ? sysdev_driver_register+0xb6/0x10d
 [<ffffffff8056592c>] ? powernowk8_init+0x0/0x7e
 [<ffffffff8048604c>] ? cpufreq_register_driver+0x8f/0x140
 [<ffffffff80209056>] ? _stext+0x56/0x14f
 [<ffffffff802c2234>] ? proc_register+0x122/0x17d
 [<ffffffff802c23a0>] ? create_proc_entry+0x73/0x8a
 [<ffffffff8025c259>] ? register_irq_proc+0x92/0xaa
 [<ffffffff8025c2c8>] ? init_irq_proc+0x57/0x69
 [<ffffffff807fc85f>] ? kernel_init+0x116/0x169
 [<ffffffff8020cc79>] ? child_rip+0xa/0x11
 [<ffffffff807fc749>] ? kernel_init+0x0/0x169
 [<ffffffff8020cc6f>] ? child_rip+0x0/0x11
Code: 05 c5 83 36 00 48 c7 c2 48 5d 86 80 48 8b 04 d8 48 8b 40 08 48 8b 34 02 48\

RIP  [<ffffffff80486361>] cpufreq_stats_update+0x4a/0x5f
 RSP <ffff88006fb83b20>
CR2: ffff88086e7528b8
---[ end trace 0678bac75e67a2f7 ]---
Kernel panic - not syncing: Attempted to kill init!

In short, aftereffect of the wrong P-state is that
cpufreq_stats_update() uses "-1" as index for some array in

cpufreq_stats_update (unsigned int cpu)
{
...
     if (stat->time_in_state)
                stat->time_in_state[stat->last_index] =
                        cputime64_add(stat->time_in_state[stat->last_index],
                                      cputime_sub(cur_time, stat->last_time));
...
}

Fortunately, the wrong P-state value is returned only if the core is
in P-state 0. This fix solves the problem by detecting the
out-of-range P-state, ignoring it, and using "0" instead.

Cc: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>

12 years ago[CPUFREQ] Documentation: Add Blackfin to list of supported processors
Robin Getz [Thu, 16 Oct 2008 17:36:43 +0000]
[CPUFREQ] Documentation: Add Blackfin to list of supported processors

Signed-off-by: Robin Getz <rgetz@blackfin.uclinux.org>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Dave Jones <davej@redhat.com>

12 years agox86, bts: fix wrmsr and spinlock over kmalloc
Markus Metzger [Tue, 25 Nov 2008 07:52:56 +0000]
x86, bts: fix wrmsr and spinlock over kmalloc

Impact: fix sleeping-with-spinlock-held bugs/crashes

- Turn a wrmsr to write the DS_AREA MSR into a wrmsrl.
- Use irqsave variants of spinlocks.
- Do not allocate memory while holding spinlocks.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, pebs: fix PEBS record size configuration
Markus Metzger [Tue, 25 Nov 2008 07:49:06 +0000]
x86, pebs: fix PEBS record size configuration

Impact: fix DS hw enablement on 64-bit x86

Fix the PEBS record size in the DS configuration.

Reported-by: Stephane Eranian <eranian@googlemail.com>
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, bts: turn macro into static inline function
Markus Metzger [Tue, 25 Nov 2008 07:47:19 +0000]
x86, bts: turn macro into static inline function

Impact: cleanup

Replace a macro with a static inline function.

Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86, bts: exclude ds.c from build when disabled
Markus Metzger [Tue, 25 Nov 2008 07:45:13 +0000]
x86, bts: exclude ds.c from build when disabled

Impact: cleanup

Move the CONFIG guard from the .c file into the makefile.

Reported-by: Andi Kleen <andi-suse@firstfloor.org>
Signed-off-by: Markus Metzger <markus.t.metzger@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoMerge branch 'topic/fix/hda' into for-linus
Takashi Iwai [Tue, 25 Nov 2008 16:21:32 +0000]
Merge branch 'topic/fix/hda' into for-linus

12 years agoarch/x86/kernel/pci-calgary_64.c: change simple_strtol to simple_strtoul
Julia Lawall [Tue, 25 Nov 2008 13:13:03 +0000]
arch/x86/kernel/pci-calgary_64.c: change simple_strtol to simple_strtoul

Impact: fix theoretical option string parsing overflow

Since bridge is unsigned, it would seem better to use simple_strtoul that
simple_strtol.

A simplified version of the semantic patch that makes this change is as
follows: (http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@r2@
long e;
position p;
@@

e = simple_strtol@p(...)

@@
position p != r2.p;
type T;
T e;
@@

e =
- simple_strtol@p
+ simple_strtoul
  (...)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: muli@il.ibm.com
Cc: jdmason@kudzu.us
Cc: discuss@x86-64.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agox86: use limited register constraint for setnz
Steven Rostedt [Tue, 25 Nov 2008 05:42:37 +0000]
x86: use limited register constraint for setnz

Impact: build fix with certain compilers

GCC can decide to use %dil when "r" is used, which is not valid for
setnz.

This bug was brought out by Stephen Rothwell's merging of the
branch tracer into linux-next.

[ Thanks to Uros Bizjak for recommending 'q' over 'Q' ]

Signed-off-by: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

12 years agoALSA: hda - Check model for Dell 92HD73xx laptops
Takashi Iwai [Tue, 25 Nov 2008 14:18:29 +0000]
ALSA: hda - Check model for Dell 92HD73xx laptops

Check the model type instead of PCI SSID for detection of the mic types
on Dell laptops with IDT 92HD73xx codecs.  In this way, a new laptop
can be tested via model module option.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

12 years agoALSA: hda - mark Dell studio 1535 quirk
Takashi Iwai [Fri, 21 Nov 2008 17:01:44 +0000]
ALSA: hda - mark Dell studio 1535 quirk

Fixed the quirk string for Dell studio 1535 (the product name wasn't
published at the time the patch was made).

Signed-off-by: Takashi Iwai <tiwai@suse.de>

12 years agoALSA: hda - No 'Headphone as Line-out' swich without line-outs
Takashi Iwai [Mon, 24 Nov 2008 06:51:11 +0000]
ALSA: hda - No 'Headphone as Line-out' swich without line-outs

STAC/IDT driver creates "Headphone as Line-Out" switch even if there
is no line-out pins on the machine.  For devices only with headpohnes
and speaker-outs, this switch shouldn't be created.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

12 years agoALSA: hda - Fix AFG power management on IDT 92HD* codecs
Takashi Iwai [Tue, 25 Nov 2008 07:21:51 +0000]
ALSA: hda - Fix AFG power management on IDT 92HD* codecs

The AFG pin power-mapping isn't properly set for the fixed I/O pins
on IDT 92HD* codecs.  This resulted in the low power mode after the
boot until any jack detection is executed, thus no output from the
speaker.

This patch fixes the power mapping for the fixed pins, and also fixes
the GPIO bits and digital I/O pin settings properly in stac92xx_ini().

Reference: Novell bnc#446025
https://bugzilla.novell.com/show_bug.cgi?id=446025

Signed-off-by: Takashi Iwai <tiwai@suse.de>

12 years agoALSA: hda - Fix caching of SPDIF status bits
Takashi Iwai [Tue, 25 Nov 2008 07:17:20 +0000]
ALSA: hda - Fix caching of SPDIF status bits

SPDIF status bits controls are written via snd_hda_codec_write()
without caching.  This causes a regression at resume that the bits
are lost.

Simply replacing it with the cached version fixes the problem.

Reference:
http://lkml.org/lkml/2008/11/24/324

Signed-off-by: Takashi Iwai <tiwai@suse.de>

12 years agodrm: move drm vblank initialization/cleanup to driver load/unload
Keith Packard [Tue, 18 Nov 2008 17:30:25 +0000]
drm: move drm vblank initialization/cleanup to driver load/unload

drm vblank initialization keeps track of the changes in driver-supplied
frame counts across vt switch and mode setting, but only if you let it by
not tearing down the drm vblank structure.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>