15 years ago[TCP]: Fix redundant calculations of tcp_current_mss()
David S. Miller [Tue, 5 Jul 2005 22:19:23 +0000]
[TCP]: Fix redundant calculations of tcp_current_mss()

tcp_write_xmit() uses tcp_current_mss(), but some of it's callers,
namely __tcp_push_pending_frames(), already has this value available
already.

While we're here, fix the "cur_mss" argument to be "unsigned int"
instead of plain "unsigned".

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TCP]: tcp_write_xmit() tabbing cleanup
David S. Miller [Tue, 5 Jul 2005 22:19:06 +0000]
[TCP]: tcp_write_xmit() tabbing cleanup

Put the main basic block of work at the top-level of
tabbing, and mark the TCP_CLOSE test with unlikely().

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TCP]: Kill extra cwnd validate in __tcp_push_pending_frames().
David S. Miller [Tue, 5 Jul 2005 22:18:51 +0000]
[TCP]: Kill extra cwnd validate in __tcp_push_pending_frames().

The tcp_cwnd_validate() function should only be invoked
if we actually send some frames, yet __tcp_push_pending_frames()
will always invoke it.  tcp_write_xmit() does the call for us,
so the call here can simply be removed.

Also, tcp_write_xmit() can be marked static.

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TCP]: Add missing skb_header_release() call to tcp_fragment().
David S. Miller [Tue, 5 Jul 2005 22:18:34 +0000]
[TCP]: Add missing skb_header_release() call to tcp_fragment().

When we add any new packet to the TCP socket write queue,
we must call skb_header_release() on it in order for the
TSO sharing checks in the drivers to work.

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TCP]: Move __tcp_data_snd_check into tcp_output.c
David S. Miller [Tue, 5 Jul 2005 22:18:18 +0000]
[TCP]: Move __tcp_data_snd_check into tcp_output.c

It reimplements portions of tcp_snd_check(), so it
we move it to tcp_output.c we can consolidate it's
logic much easier in a later change.

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TCP]: Move send test logic out of net/tcp.h
David S. Miller [Tue, 5 Jul 2005 22:18:03 +0000]
[TCP]: Move send test logic out of net/tcp.h

This just moves the code into tcp_output.c, no code logic changes are
made by this patch.

Using this as a baseline, we can begin to untangle the mess of
comparisons for the Nagle test et al.  We will also be able to reduce
all of the redundant computation that occurs when outputting data
packets.

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TCP]: Fix quick-ack decrementing with TSO.
David S. Miller [Tue, 5 Jul 2005 22:17:45 +0000]
[TCP]: Fix quick-ack decrementing with TSO.

On each packet output, we call tcp_dec_quickack_mode()
if the ACK flag is set.  It drops tp->ack.quick until
it hits zero, at which time we deflate the ATO value.

When doing TSO, we are emitting multiple packets with
ACK set, so we should decrement tp->ack.quick that many
segments.

Note that, unlike this case, tcp_enter_cwr() should not
take the tcp_skb_pcount(skb) into consideration.  That
function, one time, readjusts tp->snd_cwnd and moves
into TCP_CA_CWR state.

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.
David S. Miller [Tue, 5 Jul 2005 22:17:25 +0000]
[TCP]: Simplify SKB data portion allocation with NETIF_F_SG.

The ideal and most optimal layout for an SKB when doing
scatter-gather is to put all the headers at skb->data, and
all the user data in the page array.

This makes SKB splitting and combining extremely simple,
especially before a packet goes onto the wire the first
time.

So, when sk_stream_alloc_pskb() is given a zero size, make
sure there is no skb_tailroom().  This is achieved by applying
SKB_DATA_ALIGN() to the header length used here.

Next, make select_size() in TCP output segmentation use a
length of zero when NETIF_F_SG is true on the outgoing
interface.

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: Remove __ARGS from include/net/slhc_vj.h
Alexey Dobriyan [Tue, 5 Jul 2005 22:12:04 +0000]
[NET]: Remove __ARGS from include/net/slhc_vj.h

I suspect "#define __ARGS(x) ()" was deprecated before I was born.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: improve readability of dev_set_promiscuity() in net/core/dev.c
David Chau [Tue, 5 Jul 2005 22:11:06 +0000]
[NET]: improve readability of dev_set_promiscuity() in net/core/dev.c

A trivial patch to improve the readability of dev_set_promiscuity()
in net/core/dev.c. New code does exactly the same thing as original
code.

Signed-off-by: David Chau <ddcc@mit.edu>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[SHAPER]: Switch to spinlocks.
Christoph Hellwig [Tue, 5 Jul 2005 22:03:46 +0000]
[SHAPER]: Switch to spinlocks.

Dave, you were right and the sleeping locks in shaper were
broken. Markus Kanet noticed this and also tested the patch below that
switches locking to spinlocks.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[IPV4]: More broken memory allocation fixes for fib_trie
Robert Olsson [Tue, 5 Jul 2005 22:02:40 +0000]
[IPV4]: More broken memory allocation fixes for fib_trie

Below a patch to preallocate memory when doing resize of trie (inflate halve)
If preallocations fails it just skips the resize of this tnode for this time.

The oops we got when killing bgpd (with full routing) is now gone.
Patrick memory patch is also used.

Signed-off-by: Robert Olsson <robert.olsson@its.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[DECNET]: Fix memset overflow on 64bit archs while dumping decnet routing rules
Thomas Graf [Tue, 5 Jul 2005 22:01:25 +0000]
[DECNET]: Fix memset overflow on 64bit archs while dumping decnet routing rules

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[IPV4]: Bug fix in rt_check_expire()
Eric Dumazet [Tue, 5 Jul 2005 22:00:32 +0000]
[IPV4]: Bug fix in rt_check_expire()

- rt_check_expire() fixes (an overflow occured if size of the hash
  was >= 65536)

reminder of the bugfix:

The rt_check_expire() has a serious problem on machines with large
route caches, and a standard HZ value of 1000.

With default values, ie ip_rt_gc_interval = 60*HZ = 60000 ;

the loop count :

     for (t = ip_rt_gc_interval << rt_hash_log; t >= 0;

overflows (t is a 31 bit value) as soon rt_hash_log is >= 16  (65536
slots in route cache hash table).

In this case, rt_check_expire() does nothing at all

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[IPV4]: Use the fancy alloc_large_system_hash() function for route hash table
Eric Dumazet [Tue, 5 Jul 2005 21:58:19 +0000]
[IPV4]: Use the fancy alloc_large_system_hash() function for route hash table

- rt hash table allocated using alloc_large_system_hash() function.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: Hashed spinlocks in net/ipv4/route.c
Eric Dumazet [Tue, 5 Jul 2005 21:55:24 +0000]
[NET]: Hashed spinlocks in net/ipv4/route.c

- Locking abstraction
- Spinlocks moved out of rt hash table : Less memory (50%) used by rt
  hash table. it's a win even on UP.
- Sizing of spinlocks table depends on NR_CPUS

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[IPV4]: Handle large allocations in fib_trie
Patrick McHardy [Tue, 5 Jul 2005 21:44:55 +0000]
[IPV4]: Handle large allocations in fib_trie

Inflating a node a couple of times makes it exceed the 128k kmalloc limit.
Use __get_free_pages for allocations > PAGE_SIZE, as in fib_hash.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Robert Olsson <Robert.Olsson@data.slu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TG3]: Update driver version and reldate.
David S. Miller [Tue, 5 Jul 2005 21:43:19 +0000]
[TG3]: Update driver version and reldate.

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[TG3]: support for ethtool -C
Michael Chan [Tue, 5 Jul 2005 21:42:33 +0000]
[TG3]: support for ethtool -C

Add support for ethtool -C with verification of user parameters.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[IPV6]: Makes IPv6 rcv registration happen last during initialisation.
Herbert Xu [Tue, 5 Jul 2005 21:41:20 +0000]
[IPV6]: Makes IPv6 rcv registration happen last during initialisation.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[IPV4]: Fix crash in ip_rcv while booting related to netconsole
Herbert Xu [Tue, 5 Jul 2005 21:40:10 +0000]
[IPV4]: Fix crash in ip_rcv while booting related to netconsole

Makes IPv4 ip_rcv registration happen last in af_inet.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[SKGE]: Fix build on big-endian
David S. Miller [Tue, 5 Jul 2005 21:24:35 +0000]
[SKGE]: Fix build on big-endian

Missing PCI_REV_DESC define.

Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[PKT_SCHED]: Report rate estimator configuration errors during qdisc allocation
Thomas Graf [Tue, 5 Jul 2005 21:15:53 +0000]
[PKT_SCHED]: Report rate estimator configuration errors during qdisc allocation

Current behaviour is to not report an error if a rate
estimator is created together with a qdisc and the
configuration of the rate estimator is bogus. This leads
to unexpected behaviour because the user is not notified.

New behaviour is to report the error and let the whole
qdisc creation operation fail so the user is able to fix
his mistake.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[PKT_SCHED]: Cleanup qdisc creation and alignment macros
Thomas Graf [Tue, 5 Jul 2005 21:15:09 +0000]
[PKT_SCHED]: Cleanup qdisc creation and alignment macros

Adds qdisc_alloc() to share code between qdisc_create()
and qdisc_create_dflt(). Hides the qdisc alignment behind
macros and makes use of them.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[PKT_SCHED]: Move sch_generic.c prototypes to correct header file
Thomas Graf [Tue, 5 Jul 2005 21:14:30 +0000]
[PKT_SCHED]: Move sch_generic.c prototypes to correct header file

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: Reduce size of sk_buff by 4 bytes
Thomas Graf [Tue, 5 Jul 2005 21:13:41 +0000]
[NET]: Reduce size of sk_buff by 4 bytes

Reduce local_df to a bit field and ip_summed to a 2 bits
field thus saving 13 bits. Move bit fields, packet type,
and protocol into the spare area between the priority
and the destructor. Saves 4 bytes on both, 32bit and
64bit architectures.

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: Remove unused security member in sk_buff
Thomas Graf [Tue, 5 Jul 2005 21:12:44 +0000]
[NET]: Remove unused security member in sk_buff

Signed-off-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: net/core/filter.c: make len cover the entire packet
Patrick McHardy [Tue, 5 Jul 2005 21:10:40 +0000]
[NET]: net/core/filter.c: make len cover the entire packet

As suggested by Herbert Xu:

Since we don't require anything to be in the linear packet range
anymore make len cover the entire packet.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: Consolidate common code in net/core/filter.c
Patrick McHardy [Tue, 5 Jul 2005 21:10:21 +0000]
[NET]: Consolidate common code in net/core/filter.c

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: Remove redundant code in net/core/filter.c
Patrick McHardy [Tue, 5 Jul 2005 21:08:57 +0000]
[NET]: Remove redundant code in net/core/filter.c

skb_header_pointer handles linear and non-linear data, no need to handle
linear data again.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[NET]: Fix signedness issues in net/core/filter.c
Patrick McHardy [Tue, 5 Jul 2005 21:08:10 +0000]
[NET]: Fix signedness issues in net/core/filter.c

This is the code to load packet data into a register:

                        k = fentry->k;
                        if (k < 0) {
...
                        } else {
                                u32 _tmp, *p;
                                p = skb_header_pointer(skb, k, 4, &_tmp);
                                if (p != NULL) {
                                        A = ntohl(*p);
                                        continue;
                                }
                        }

skb_header_pointer checks if the requested data is within the
linear area:

        int hlen = skb_headlen(skb);

        if (offset + len <= hlen)
                return skb->data + offset;

When offset is within [INT_MAX-len+1..INT_MAX] the addition will
result in a negative number which is <= hlen.

I couldn't trigger a crash on my AMD64 with 2GB of memory, but a
coworker tried on his x86 machine and it crashed immediately.

This patch fixes the check in skb_header_pointer to handle large
positive offsets similar to skb_copy_bits. Invalid data can still
be accessed using negative offsets (also similar to skb_copy_bits),
anyone using negative offsets needs to verify them himself.

Thanks to Thomas Vögtle <thomas.voegtle@coreworks.de> for verifying the
problem by crashing his machine and providing me with an Oops.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

15 years ago[PATCH] ARM: Fix new-ABI layout of struct stat64
Russell King [Mon, 4 Jul 2005 12:02:46 +0000]
[PATCH] ARM: Fix new-ABI layout of struct stat64

Add __attribute__((packed)) to ensure that the stat64 structure is
correctly laid out no matter which ABI the kernel is compiled for.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: Fix non-standard PXA io_pg_offst initialisers
Russell King [Mon, 4 Jul 2005 09:44:34 +0000]
[PATCH] ARM: Fix non-standard PXA io_pg_offst initialisers

These didn't match my sed expression correctly, fix them up manually.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: Change 'param_offset' to 'boot_params'
Russell King [Mon, 4 Jul 2005 09:43:36 +0000]
[PATCH] ARM: Change 'param_offset' to 'boot_params'

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sun, 3 Jul 2005 21:39:33 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Sun, 3 Jul 2005 21:37:09 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

15 years ago[PATCH] Serial: Fix console port spinlock initialisation
Russell King [Sun, 3 Jul 2005 20:05:45 +0000]
[PATCH] Serial: Fix console port spinlock initialisation

Initialise the spinlock for port being used by the console early, but
don't re-initialise it again later.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2784/1: Fix the block cache flush operation range
Catalin Marinas [Sun, 3 Jul 2005 16:53:25 +0000]
[PATCH] ARM: 2784/1: Fix the block cache flush operation range

Patch from Catalin Marinas

The range for the ARMv6 block cache operations is inclusive but the
kernel doesn't re-calculate the end address, causing a page fault when
used (this only happens with support for cache aliasing, otherwise the
blk_flush_kern_dcache_page() is not called). This patch subtracts
L1_CACHE_BYTES from the end address.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2785/1: S3C24XX - serial calls request_irq() with IRQs disabled
Ben Dooks [Sun, 3 Jul 2005 16:44:40 +0000]
[PATCH] ARM: 2785/1: S3C24XX - serial calls request_irq() with IRQs disabled

Patch from Ben Dooks

The request_irq() function is called by s3c24xx uart driver with
the local IRQs disabled. The request_irq() function can allocate
memory via kmalloc(), and this may sleep causing a warning about
sleeping in an invalid context.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: Remove machine description macros
Russell King [Sun, 3 Jul 2005 16:38:58 +0000]
[PATCH] ARM: Remove machine description macros

Remove the pointless machine description macros, favouring C99
initialisers instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] drivers/ide/Makefile: kill dead CONFIG_BLK_DEV_IDE_TCQ entry
Adrian Bunk [Sun, 3 Jul 2005 15:44:10 +0000]
[PATCH] drivers/ide/Makefile: kill dead CONFIG_BLK_DEV_IDE_TCQ entry

This patch kills the dead CONFIG_BLK_DEV_IDE_TCQ entry.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] amd74xx: support MCP55 device IDs
Rob Punkunus [Sun, 3 Jul 2005 15:37:18 +0000]
[PATCH] amd74xx: support MCP55 device IDs

From: Rob Punkunus <rpunkunus@nvidia.com>

Rob Punkunus recently submitted a patch to enable support for MCP51/MCP55 in
the amd74xx driver. This patch was whitespace-corrupted and didn't apply to
2.6.12 since MCP51 support was merged in the 2.6.12-rc series.

Gentoo would like to support this hardware for our upcoming release media, so
I fixed the patch, and here it is :)

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: fix line break in ide messages
Denis Vlasenko [Sun, 3 Jul 2005 15:09:13 +0000]
[PATCH] ide: fix line break in ide messages

From: Denis Vlasenko <vda@ilport.com.ua>

* printk("\n") is misplaced, resulting in stray empty line in kernel log
* cleanups nerby: some back-to-back printks are combined, etc

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit via82cxxx.c
Herbert Xu [Sun, 3 Jul 2005 14:42:18 +0000]
[PATCH] ide: hotplug mark __devinit via82cxxx.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit triflex.c
Herbert Xu [Sun, 3 Jul 2005 14:40:31 +0000]
[PATCH] ide: hotplug mark __devinit triflex.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit slc90e66.c
Herbert Xu [Sun, 3 Jul 2005 14:38:51 +0000]
[PATCH] ide: hotplug mark __devinit slc90e66.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit sl82c105.c
Herbert Xu [Sun, 3 Jul 2005 14:36:56 +0000]
[PATCH] ide: hotplug mark __devinit sl82c105.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit sc1200.c
Herbert Xu [Sun, 3 Jul 2005 14:35:07 +0000]
[PATCH] ide: hotplug mark __devinit sc1200.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit opti621.c
Herbert Xu [Sun, 3 Jul 2005 14:33:16 +0000]
[PATCH] ide: hotplug mark __devinit opti621.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit ns87415.c
Herbert Xu [Sun, 3 Jul 2005 14:31:04 +0000]
[PATCH] ide: hotplug mark __devinit ns87415.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit it8172.c
Herbert Xu [Sun, 3 Jul 2005 14:28:44 +0000]
[PATCH] ide: hotplug mark __devinit it8172.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit cy82c693.c
Herbert Xu [Sun, 3 Jul 2005 14:25:46 +0000]
[PATCH] ide: hotplug mark __devinit cy82c693.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit cs5530.c
Herbert Xu [Sun, 3 Jul 2005 14:23:08 +0000]
[PATCH] ide: hotplug mark __devinit cs5530.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit amd74xx.c
Herbert Xu [Sun, 3 Jul 2005 14:15:41 +0000]
[PATCH] ide: hotplug mark __devinit amd74xx.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years ago[PATCH] ide: hotplug mark __devinit alim15x3.c
Herbert Xu [Sun, 3 Jul 2005 14:06:13 +0000]
[PATCH] ide: hotplug mark __devinit alim15x3.c

From: Herbert Xu <herbert@gondor.apana.org.au>

mark the __init section __devinit.
Splitted up from the Debian kernel patch.

see the thread about the pci hotplug crash on a stratus box.
http://marc.theaimsgroup.com/?l=linux-kernel&m=111930108613386&w=2

Signed-off-by: maximilian attems <janitor@sternwelten.at>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@elka.pw.edu.pl>

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-mmc
Linus Torvalds [Sat, 2 Jul 2005 17:39:09 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-mmc

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 2 Jul 2005 17:37:50 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

15 years agoIf ACPI doesn't find an irq listed, don't accept 0 as a valid PCI irq.
Linus Torvalds [Sat, 2 Jul 2005 17:35:33 +0000]
If ACPI doesn't find an irq listed, don't accept 0 as a valid PCI irq.

That zero just means that nothing else found any irq information either.

15 years ago[PATCH] alpha smp fix (part #2)
Ivan Kokshaysky [Fri, 1 Jul 2005 12:46:26 +0000]
[PATCH] alpha smp fix (part #2)

This fixes the bug that caused BUG_ON(!irqs_disabled()) to trigger in
run_posix_cpu_timers() on alpha/smp.  We didn't disable interrupts
properly before calling smp_percpu_timer_interrupt().

We *do* disable interrupts everywhere except this unfortunate
smp_percpu_timer_interrupt().  Fixed thus.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] MMC: wbsd cleanups
Adrian Bunk [Fri, 1 Jul 2005 12:07:37 +0000]
[PATCH] MMC: wbsd cleanups

This patch contains the following possible cleanups:
- make some needlessly global code static
- remove the unneeded global function DBG_REG

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] MMC: wbsd delayed insertion
Pierre Ossman [Fri, 1 Jul 2005 11:13:55 +0000]
[PATCH] MMC: wbsd delayed insertion

Wait 0.5 seconds before scanning for cards after an insertion interrupt.
The electrical connection needs this time to stabilise for some cards.

Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: replace schedule_timeout() with msleep()
Nishanth Aravamudan [Fri, 1 Jul 2005 11:11:51 +0000]
[PATCH] ARM: replace schedule_timeout() with msleep()

Use msleep() instead of schedule_timeout() to guarantee the task
delays as expected. Neither signals nor wait-queue events are
important at this point in the code, I believe.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Domen Puncer <domen@coderock.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] MMC: Fix divdi3 reference in mmci.c
Russell King [Fri, 1 Jul 2005 11:02:59 +0000]
[PATCH] MMC: Fix divdi3 reference in mmci.c

Use do_div() instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: Make the magic values in head.S more obvious
Russell King [Fri, 1 Jul 2005 10:56:55 +0000]
[PATCH] ARM: Make the magic values in head.S more obvious

Make the magic address values in head.S more obvious as to where
they came from.  Wrap all debug code in CONFIG_DEBUG_LL.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2783/1: Remove omnimeter_defconfig as there is no kernel support
Ben Dooks [Fri, 1 Jul 2005 10:27:06 +0000]
[PATCH] ARM: 2783/1: Remove omnimeter_defconfig as there is no kernel support

Patch from Ben Dooks

The omnimeter_defconfig does not define any machines and
seems to have no other support in the current kernel.
This patch removes the config file, as this is the only
thing currently mentioning the ominmeter.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2782/1: PXA27x MDREFR K0DB4 define
Todd Poynor [Fri, 1 Jul 2005 10:27:06 +0000]
[PATCH] ARM: 2782/1: PXA27x MDREFR K0DB4 define

Patch from Todd Poynor

Add definition of K0DB4 SDCLK<0,3> divide-by-4 control/status bit in the
MDREFR register for Intel XScale PXA27x.

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2781/2: PXA27x Standby mode take 2
Todd Poynor [Fri, 1 Jul 2005 10:27:05 +0000]
[PATCH] ARM: 2781/2: PXA27x Standby mode take 2

Patch from Todd Poynor

Add support for PXA27x Standby mode, a low-power mode that retains CPU
and some peripheral state (the existing "sleep" mode is a power-power
mode that retains less state). Activated via:
echo -n standby > /sys/power/state
From: David Burrage and Todd Poynor

Signed-off-by: Todd Poynor <tpoynor@mvista.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] fatfs sectioning fix
Andrew Morton [Fri, 1 Jul 2005 05:13:14 +0000]
[PATCH] fatfs sectioning fix

Fixup for the recent slab leak fix

Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] alpha smp fix
Ivan Kokshaysky [Thu, 30 Jun 2005 16:02:18 +0000]
[PATCH] alpha smp fix

As usual, the reason of this breakage is quite silly: in do_entIF, we
are checking for PS == 0 to see whether it was a kernel BUG() or
userspace trap.

It works, unless BUG() happens in interrupt - PS is not 0 in kernel mode
due to non-zero IPL, and the things get messed up horribly then.  In
this particular case it was BUG_ON(!irqs_disabled()) triggered in
run_posix_cpu_timers(), so we ended up shooting "current" with the
bursts of one SIGTRAP and three SIGILLs on every timer tick.  ;-)

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Fri, 1 Jul 2005 00:07:37 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

15 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Fri, 1 Jul 2005 00:04:54 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

15 years ago[PATCH] ARM: 2780/1: AFS partition length calculation fix
Catalin Marinas [Thu, 30 Jun 2005 22:01:09 +0000]
[PATCH] ARM: 2780/1: AFS partition length calculation fix

Patch from Catalin Marinas

This patch calculates the AFS partition length by expanding the image
length information to the nearest erase block boundary. This
eliminates the problems with JFFS2 erasing the footer.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] Serial: Fix small CONFIG_SERIAL_8250_NR_UARTS
Russell King [Thu, 30 Jun 2005 21:41:22 +0000]
[PATCH] Serial: Fix small CONFIG_SERIAL_8250_NR_UARTS

If CONFIG_SERIAL_8250_NR_UARTS is smaller than the array size in
asm/serial.h, we trampled on memory which wasn't ours.  Take our
big boots away by limiting the number of ports initialised to the
smaller of ...NR_UARTS and the array size.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Thu, 30 Jun 2005 16:04:36 +0000]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

15 years ago[PATCH] ARM: 2779/1: Fix the V bit setting for the ARM1020x CPUs
Catalin Marinas [Thu, 30 Jun 2005 16:04:14 +0000]
[PATCH] ARM: 2779/1: Fix the V bit setting for the ARM1020x CPUs

Patch from Catalin Marinas

This patch fixes the V bit setting for the ARM1020x processors. At
reset, this bit is automatically set to the value of the HIVECSINIT
input signal which just happened to be 1 but it is not mandatory.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2778/1: Add -mno-thumb-interwork to CFLAGS_ABI
Catalin Marinas [Thu, 30 Jun 2005 16:04:14 +0000]
[PATCH] ARM: 2778/1: Add -mno-thumb-interwork to CFLAGS_ABI

Patch from Catalin Marinas

The new EABI gcc adds -mthumb-interwork by default, even if
-mabi=apcs-gnu is passed. This causes a warning for every compiled C
file when -march=armv4 is used. The patch adds -mno-thumb-interwork
if the option is supported. This is also useful since we don't need
any ARM/Thumb interworking in the kernel

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: 2777/1: Fix broken comment arch/arm/mm/proc-arm1020.S
Catalin Marinas [Thu, 30 Jun 2005 16:04:13 +0000]
[PATCH] ARM: 2777/1: Fix broken comment arch/arm/mm/proc-arm1020.S

Patch from Catalin Marinas

This patch fixes a broken comment in the proc-arm1020.S file which
prevents the file compilation

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years agoMerge rsync://rsync.kernel.org/pub/scm/linux/kernel/git/paulus/ppc64-2.6
Linus Torvalds [Thu, 30 Jun 2005 15:48:56 +0000]
Merge /pub/scm/linux/kernel/git/paulus/ppc64-2.6

15 years ago[PATCH] reiserfs: handle_attrs() fix
Andrew Morton [Thu, 30 Jun 2005 09:59:06 +0000]
[PATCH] reiserfs: handle_attrs() fix

Fix a use-uninitialised bug.

Cc: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] freevxfs: minor cleanups
Pekka Enberg [Thu, 30 Jun 2005 09:59:05 +0000]
[PATCH] freevxfs: minor cleanups

This patch addresses the following minor issues:

  - Typo in printk
  - Redundant casts
  - Use C99 struct initializers instead of memset
  - Parenthesis around return value
  - Use inline instead of __inline__

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] freevxfs: remove 2.4 compatability
Pekka Enberg [Thu, 30 Jun 2005 09:59:05 +0000]
[PATCH] freevxfs: remove 2.4 compatability

This patch removes 2.4 compatability header from freevxfs.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] freevxfs: fix buffer_head leak
Pekka Enberg [Thu, 30 Jun 2005 09:59:04 +0000]
[PATCH] freevxfs: fix buffer_head leak

- fix a buffer_head leak in vxfs_getfsh()

- s/SLAB_KERNEL/GFP_KERNEL/

- check sb_bread() return value

- drop pointless buffer-mapped() test.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] Improper initrd failure message at boot time
Jay Lan [Thu, 30 Jun 2005 09:59:03 +0000]
[PATCH] Improper initrd failure message at boot time

On system boot up, there was an failure reported to boot.msg:

     <5>Trying to move old root to /initrd ... failed

According to initrd(4) man page, step #7 of BOOT-UP OPERATION
is described as below:
          7. If the normal root file has directory /initrd, device
          /dev/ram0 is moved from  /  to  /initrd.   Otherwise  if
          directory  /initrd  does  not  exist device /dev/ram0 is
          unmounted.

We got service calls from customers concerning about this failure message
at boot time.  Many systems do not have /initrd and thus the message can be
changed in the case of non-existing /initrd so that it does not sound like
a failure of the system.

Signed-off-by: Jay Lan <jlan@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] udf_find_entry() cleanup
Christoph Hellwig [Thu, 30 Jun 2005 09:59:02 +0000]
[PATCH] udf_find_entry() cleanup

udf_find_entry can never be called with a NULL argument, so we shouldn't
check for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] fat: fix slab cache leak
Pekka J Enberg [Thu, 30 Jun 2005 09:59:01 +0000]
[PATCH] fat: fix slab cache leak

This patch plugs a slab cache leak in fat module initialization.

Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] xtensa: Fix asm macro
Chris Zankel [Thu, 30 Jun 2005 09:59:00 +0000]
[PATCH] xtensa: Fix asm macro

Removed dead code in arch/xtensa/kernel/pci.c and use the pci_name() macro.
 Fixed an error in the delay asm macro: '1' is an invalid immediate value.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] xtensa: Removed local copy of zlib and fixed O= support
Chris Zankel [Thu, 30 Jun 2005 09:58:59 +0000]
[PATCH] xtensa: Removed local copy of zlib and fixed O= support

Removed an unnecessary local copy of zlib (sorry for the add'l traffic).
Fixed 'O=' support (thanks to Jan Dittmer for pointing it out).  Some minor
clean-ups in the make files.

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] xtensa: Added mm/Kconfig to get a flat memory layout
Chris Zankel [Thu, 30 Jun 2005 09:58:58 +0000]
[PATCH] xtensa: Added mm/Kconfig to get a flat memory layout

Added 'mm/Kconfig' to the xtensa Kconfig file to get a flat memory layout.
Fixed a typo in one of the help texts (thanks Geert for pointing it out)

Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] xtensa: cleanups for errno and ipc.
Chris Zankel [Thu, 30 Jun 2005 09:58:57 +0000]
[PATCH] xtensa: cleanups for errno and ipc.

I noticed this because I was doing some more ipc cleanups and I did the
original errno and ipc cleanups for other architectures, so it stuck out.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] xtensa: use valid_signal()
Jesper Juhl [Thu, 30 Jun 2005 09:58:56 +0000]
[PATCH] xtensa: use valid_signal()

xtensa should use valid_signal() instead of testing _NSIG directly like
everyone else.

Signed-off-by: Jesper Juhl <juhl-lkml@dif.dk>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] x86: i8253/i8259A lock cleanup
Ingo Molnar [Thu, 30 Jun 2005 09:58:55 +0000]
[PATCH] x86: i8253/i8259A lock cleanup

Introduce proper declarations for i8253_lock and i8259A_lock.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ppc32: Fix pointer check for MPC8540 ADS device
Kumar Gala [Thu, 30 Jun 2005 09:58:55 +0000]
[PATCH] ppc32: Fix pointer check for MPC8540 ADS device

Editor snafu in which the call to ppc_sys_get_pdata got inside the if check
instead of before it.  Oops.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] selinux_sb_copy_data() should not require a whole page
Eric Paris [Thu, 30 Jun 2005 09:58:51 +0000]
[PATCH] selinux_sb_copy_data() should not require a whole page

Currently selinux_sb_copy_data requires an entire page be allocated to
*orig when the function is called.  This "requirement" is based on the fact
that we call copy_page(in_save, nosec_save) and in_save = orig when the
data is not FS_BINARY_MOUNTDATA.  This means that if a caller were to call
do_kern_mount with only about 10 bytes of options, they would get passed
here and then we would corrupt PAGE_SIZE - 10 bytes of memory (with all
zeros.)

Currently it appears all in kernel FS's use one page of data so this has
not been a problem.  An out of kernel FS did just what is described above
and it would almost always panic shortly after they tried to mount.  From
looking else where in the kernel it is obvious that this string of data
must always be null terminated.  (See example in do_mount where it always
zeros the last byte.) Thus I suggest we use strcpy in place of copy_page.
In this way we make sure the amount we copy is always less than or equal to
the amount we received and since do_mount is zeroing the last byte this
should be safe for all.

Signed-off-by: Eric Paris <eparis@parisplace.org>
Cc: Stephen Smalley <sds@epoch.ncsc.mil>
Acked-by: James Morris <jmorris@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] tpm: fix bug introduced by the /proc/misc
Kylene Jo Hall [Thu, 30 Jun 2005 09:58:50 +0000]
[PATCH] tpm: fix bug introduced by the /proc/misc

In fixing the /proc/misc problem that was reported last week where the tpm
module name was being obfuscated in /proc/misc I introduced a bug in the
module unloading code.  This patch fixes the problem.

Signed-off-by: Kylene Hall <kjhall@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ppc32: use correct register names in arch/ppc/kernel/relocate_kernel.S
Olaf Hering [Thu, 30 Jun 2005 09:58:49 +0000]
[PATCH] ppc32: use correct register names in arch/ppc/kernel/relocate_kernel.S

CONFIG_KEXEC=y doesnt work:

arch/ppc/kernel/relocate_kernel.S:37: Error: unsupported relocation against SRR1
arch/ppc/kernel/relocate_kernel.S:39: Error: unsupported relocation against SRR0

Signed-off-by: Olaf Hering <olh@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] s390: fix finish_arch_switch
Heiko Carstens [Thu, 30 Jun 2005 09:58:48 +0000]
[PATCH] s390: fix finish_arch_switch

Commit 4866cde064afbb6c2a488c265e696879de616daa requires finish_arch_switch
to have only one parameter instead of two.

Also fix another compile error (double declaration of account_system_vtime)
if CONFIG_VIRT_CPU_ACCOUNTING is not defined.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: update Documentation
Dominik Brodowski [Thu, 30 Jun 2005 09:58:47 +0000]
[PATCH] pcmcia: update Documentation

As the information is now exported via sysfs, there's no need for an userspace
tool any longer.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] pcmcia: fix modalias attribute in sysfs
Dominik Brodowski [Thu, 30 Jun 2005 09:58:47 +0000]
[PATCH] pcmcia: fix modalias attribute in sysfs

Fix up PCMCIA modalias file in sysfs

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

15 years ago[PATCH] ARM: Acornfb: Don't claim IRQ fbcon for cursor
Russell King [Thu, 30 Jun 2005 15:30:07 +0000]
[PATCH] ARM: Acornfb: Don't claim IRQ fbcon for cursor

The generic fbcon code tries to register and use the vsync IRQ for
ARM platforms with acornfb, but forgets to disable its own cursor
timer.  The result is a flickering flashing cursor.

Remove the code from the fbcon core to register this platform
private interrupt.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

15 years ago[PATCH] ARM: Don't try to send a signal to pid0
Russell King [Thu, 30 Jun 2005 10:06:49 +0000]
[PATCH] ARM: Don't try to send a signal to pid0

If we receive an unrecognised abort during boot, don't try to
send a signal to pid0, but instead report the current state.
This leads to less confusing debug reports.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>