8 years agoMIPS: Alchemy: Fix reset for MTX-1 and XXS1500
Florian Fainelli [Mon, 21 Feb 2011 13:28:02 +0000]
MIPS: Alchemy: Fix reset for MTX-1 and XXS1500

Since commit 32fd6901 (MIPS: Alchemy: get rid of common/reset.c)
Alchemy-based boards use their own reset function. For MTX-1 and XXS1500,
the reset function pokes at the BCSR.SYSTEM_RESET register, but this does
not work. According to Bruno Randolf, this was not tested when written.

Previously, the generic au1000_restart() routine called the board specific
reset function, which for MTX-1 and XXS1500 did not work, but finally made
a jump to the reset vector, which really triggers a system restart. Fix
reboot for both targets by jumping to the reset vector.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2093/
Acked-by: Bruno Randolf <br1@einfach.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: MTX-1: Make au1000_eth probe all PHY addresses
Florian Fainelli [Sun, 27 Feb 2011 18:53:53 +0000]
MIPS: MTX-1: Make au1000_eth probe all PHY addresses

When au1000_eth probes the MII bus for PHY address, if we do not set
au1000_eth platform data's phy_search_highest_address, the MII probing
logic will exit early and will assume a valid PHY is found at address 0.
For MTX-1, the PHY is at address 31, and without this patch, the link
detection/speed/duplex would not work correctly.

CC: stable@kernel.org
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2111/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Jz4740: Add HAVE_CLK
Maurus Cuelenaere [Mon, 28 Feb 2011 23:20:01 +0000]
MIPS: Jz4740: Add HAVE_CLK

Jz4740 supports the clock framework but doesn't have HAVE_CLK defined,
so define it!

Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2112/
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Move idle task creation to work queue
Maksim Rayskiy [Sat, 12 Feb 2011 18:21:32 +0000]
MIPS: Move idle task creation to work queue

To avoid forking usermode thread when creating an idle task, move fork_idle
to a work queue.

If kernel starts with maxcpus= option which does not bring all available
cpus online at boot time, idle tasks for offline cpus are not created. If
later offline cpus are hotplugged through sysfs, __cpu_up is called in
the context of the user task, and fork_idle copies its non-zero mm
pointer.  This causes BUG() in per_cpu_trap_init.

This also avoids issues with resource limits of the CPU writing to sysfs,
containers, maybe others.

Signed-off-by: Maksim Rayskiy <mrayskiy@broadcom.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2070/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS, Perf-events: Use unsigned delta for right shift in event update
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:21 +0000]
MIPS, Perf-events: Use unsigned delta for right shift in event update

Leverage the commit for ARM by Will Deacon:

446a5a8b1eb91a6990e5c8fe29f14e7a95b69132
    ARM: 6205/1: perf: ensure counter delta is treated as unsigned

    Hardware performance counters on ARM are 32-bits wide but atomic64_t
    variables are used to represent counter data in the hw_perf_event structure.

    The armpmu_event_update function right-shifts a signed 64-bit delta variable
    and adds the result to the event count. This can lead to shifting in sign-bits
    if the MSB of the 32-bit counter value is set. This results in perf output
    such as:

     Performance counter stats for 'sleep 20':

     18446744073460670464  cycles             <-- 0xFFFFFFFFF12A6000
            7783773  instructions             #      0.000 IPC
                465  context-switches
                161  page-faults
            1172393  branches

       20.154242147  seconds time elapsed

    This patch ensures that the delta value is treated as unsigned so that the
    right shift sets the upper bits to zero.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Patchwork: http://patchwork.linux-mips.org/patch/2015/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS, Perf-events: Work with the new callchain interface
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:20 +0000]
MIPS, Perf-events: Work with the new callchain interface

This is the MIPS part of the following commits by Frederic Weisbecker:

f72c1a931e311bb7780fee19e41a89ac42cab50e
    perf: Factorize callchain context handling

    Store the kernel and user contexts from the generic layer instead
    of archs, this gathers some repetitive code.

56962b4449af34070bb1994621ef4f0265eed4d8
    perf: Generalize some arch callchain code

    - Most archs use one callchain buffer per cpu, except x86 that needs
      to deal with NMIs. Provide a default perf_callchain_buffer()
      implementation that x86 overrides.

    - Centralize all the kernel/user regs handling and invoke new arch
      handlers from there: perf_callchain_user() / perf_callchain_kernel()
      That avoid all the user_mode(), current->mm checks and so...

    - Invert some parameters in perf_callchain_*() helpers: entry to the
      left, regs to the right, following the traditional (dst, src).

70791ce9ba68a5921c9905ef05d23f62a90bc10c
    perf: Generalize callchain_store()

    callchain_store() is the same on every archs, inline it in
    perf_event.h and rename it to perf_callchain_store() to avoid
    any collision.

    This removes repetitive code.

c1a65932fd7216fdc9a0db8bbffe1d47842f862c
    perf: Drop unappropriate tests on arch callchains

    Drop the TASK_RUNNING test on user tasks for callchains as
    this check doesn't seem to make any sense.

    Also remove the tests for !current that is not supposed to
    happen and current->pid as this should be handled at the
    generic level, with exclude_idle attribute.

Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Patchwork: http://patchwork.linux-mips.org/patch/2014/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS, Perf-events: Fix event check in validate_event()
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:19 +0000]
MIPS, Perf-events: Fix event check in validate_event()

Ignore events that are in off/error state or belong to a different PMU.

This patch originates from the following commit for ARM by Will Deacon:

65b4711ff513767341aa1915c822de6ec0de65cb
    ARM: 6352/1: perf: fix event validation

    The validate_event function in the ARM perf events backend has the
    following problems:

    1.) Events that are disabled count towards the cost.
    2.) Events associated with other PMUs [for example, software events or
        breakpoints] do not count towards the cost, but do fail validation,
        causing the group to fail.

    This patch changes validate_event so that it ignores events in the
    PERF_EVENT_STATE_OFF state or that are scheduled for other PMUs.

Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Cc: ddaney@caviumnetworks.com
Patchwork: http://patchwork.linux-mips.org/patch/2013/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS, Perf-events: Work with the new PMU interface
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:18 +0000]
MIPS, Perf-events: Work with the new PMU interface

This is the MIPS part of the following commits by Peter Zijlstra:

a4eaf7f14675cb512d69f0c928055e73d0c6d252
    perf: Rework the PMU methods

    Replace pmu::{enable,disable,start,stop,unthrottle} with
    pmu::{add,del,start,stop}, all of which take a flags argument.

    The new interface extends the capability to stop a counter while
    keeping it scheduled on the PMU. We replace the throttled state with
    the generic stopped state.

    This also allows us to efficiently stop/start counters over certain
    code paths (like IRQ handlers).

    It also allows scheduling a counter without it starting, allowing for
    a generic frozen state (useful for rotating stopped counters).

    The stopped state is implemented in two different ways, depending on
    how the architecture implemented the throttled state:

     1) We disable the counter:
        a) the pmu has per-counter enable bits, we flip that
        b) we program a NOP event, preserving the counter state

     2) We store the counter state and ignore all read/overflow events

For MIPSXX, the stopped state is implemented in the way of 1.b as above.

33696fc0d141bbbcb12f75b69608ea83282e3117
    perf: Per PMU disable

    Changes perf_disable() into perf_pmu_disable().

24cd7f54a0d47e1d5b3de29e2456bfbd2d8447b7
    perf: Reduce perf_disable() usage

    Since the current perf_disable() usage is only an optimization,
    remove it for now. This eases the removal of the __weak
    hw_perf_enable() interface.

b0a873ebbf87bf38bf70b5e39a7cadc96099fa13
    perf: Register PMU implementations

    Simple registration interface for struct pmu, this provides the
    infrastructure for removing all the weak functions.

51b0fe39549a04858001922919ab355dee9bdfcf
    perf: Deconstify struct pmu

    sed -ie 's/const struct pmu\>/struct pmu/g' `git grep -l "const struct pmu\>"`

Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: a.p.zijlstra@chello.nl
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: wuzhangjin@gmail.com
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: dengcheng.zhu@gmail.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com
Cc: ddaney@caviumnetworks.com
Patchwork: http://patchwork.linux-mips.org/patch/2012/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS, Perf-events: Work with irq_work
Deng-Cheng Zhu [Fri, 21 Jan 2011 08:19:17 +0000]
MIPS, Perf-events: Work with irq_work

This is the MIPS part of the following commit by Peter Zijlstra:

e360adbe29241a0194e10e20595360dd7b98a2b3
    irq_work: Add generic hardirq context callbacks

    Provide a mechanism that allows running code in IRQ context. It is
    most useful for NMI code that needs to interact with the rest of the
    system -- like wakeup a task to drain buffers.

    Perf currently has such a mechanism, so extract that and provide it as
    a generic feature, independent of perf so that others may also
    benefit.

    The IRQ context callback is generated through self-IPIs where
    possible, or on architectures like powerpc the decrementer (the
    built-in timer facility) is set to generate an interrupt immediately.

    Architectures that don't have anything like this get to do with a
    callback from the timer tick. These architectures can call
    irq_work_run() at the tail of any IRQ handlers that might enqueue such
    work (like the perf IRQ handler) to avoid undue latencies in
    processing the work.

For MIPSXX, we need to call irq_work_run() at the tail of the perf IRQ
handler as described above.

Reported-by: Wu Zhangjin <wuzhangjin@gmail.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: fweisbec@gmail.com
To: will.deacon@arm.com
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: paulus@samba.org
Cc: mingo@elte.hu
Cc: acme@redhat.com
Cc: matt@console-pimps.org
Cc: sshtylyov@mvista.com,
Patchwork: http://patchwork.linux-mips.org/patch/2011/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Fix always CONFIG_LOONGSON_UART_BASE=y
Yoichi Yuasa [Mon, 7 Feb 2011 02:31:36 +0000]
MIPS: Fix always CONFIG_LOONGSON_UART_BASE=y

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/2055/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Loongson: Fix potentially wrong string handling
Stefan Weil [Sun, 30 Jan 2011 20:41:44 +0000]
MIPS: Loongson: Fix potentially wrong string handling

This error was reported by cppcheck:
arch/mips/loongson/common/machtype.c:56: error: Dangerous usage of 'str' (strncpy doesn't always 0-terminate it)

If strncpy copied MACHTYPE_LEN bytes, the destination string str
was not terminated.

The patch adds one more byte to str and makes sure that this byte is
always 0.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Arnaud Patard <apatard@mandriva.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2053/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c
David Daney [Mon, 24 Jan 2011 22:51:37 +0000]
MIPS: Fix GCC-4.6 'set but not used' warning in arch/mips/mm/init.c

Under some combinations of CONFIG_*, lastpfn in page_is_ram is 'set
but not used'.  Mark it as __maybe_unused to quiet the warning/error.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2033/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h
David Daney [Mon, 24 Jan 2011 22:51:36 +0000]
MIPS: Fix GCC-4.6 'set but not used' warning in ieee754int.h

GCC-4.6 can find more unused code than previous versions could.

In the case of arch/mips/math-emu/ieee754int.h, the COMPXSP and
COMPXDP macros are used in several places, but a couple of them leave
xs unused.  The easiest thing to do is mark it as __maybe_unused to
quiet the warning.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2032/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Remove unused code from arch/mips/kernel/syscall.c
David Daney [Mon, 24 Jan 2011 22:51:35 +0000]
MIPS: Remove unused code from arch/mips/kernel/syscall.c

The variable arg3 in _sys_sysmips() is unused.  Remove it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2034/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Fix GCC-4.6 'set but not used' warning in signal*.c
David Daney [Mon, 24 Jan 2011 22:51:34 +0000]
MIPS: Fix GCC-4.6 'set but not used' warning in signal*.c

GCC-4.6 can find more unused code than previous versions could.

In the case of protected_restore_fp_context{,32}, the variable tmp is
really used.  Its use is tricky in that we really care about the side
effects of the __put_user() calls.  So we must mark tmp with
__maybe_unused to quiet the warning.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2035/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: MSP: Fix MSP71xx bpci interrupt handler return value
Anoop P A [Thu, 18 Nov 2010 10:32:50 +0000]
MIPS: MSP: Fix MSP71xx bpci interrupt handler return value

Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: Ben Hutchings <ben@decadent.org.uk>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1804/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Select R4K timer lib for all MSP platforms
Anoop P A [Thu, 18 Nov 2010 08:12:28 +0000]
MIPS: Select R4K timer lib for all MSP platforms

Signed-off-by: Anoop P A <anoop.pa@gmail.com>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1803/
Tested-by: Shane McDonald <mcdonald.shane@gmail.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Loongson: Remove ad-hoc cmdline default
Robert Millan [Sun, 7 Nov 2010 12:38:29 +0000]
MIPS: Loongson: Remove ad-hoc cmdline default

Loongson builds have an ad-hoc cmdline default of "console=ttyS0,115200
root=/dev/hda1". These settings come from a vendor; I remember builds
from Lemote branch requiring a "console=tty" override in order to get a
working console.

At least on Yeeloong, they're particularly useless: there's no external
serial port, and the IDE drive is now recognised as /dev/sda.

Signed-off-by: Robert Millan <rmh@gnu.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1759/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).
Stefan Oberhumer [Mon, 17 Jan 2011 08:19:53 +0000]
MIPS: Clear the correct flag in sysmips(MIPS_FIXADE, ...).

The sysmips(MIPS_FIXADE, ...) case contains an obvious copy-and-paste
error in the handling of the TIF_LOGADE flag. Fix that

Patchwork: https://patchwork.linux-mips.org/patch/1997/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS: Add an unreachable return statement to satisfy buggy GCCs.
David Daney [Wed, 19 Jan 2011 23:24:42 +0000]
MIPS: Add an unreachable return statement to satisfy buggy GCCs.

It was reported that GCC-4.3.3 (with CodeSourcery extensions) fails
without this.

Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2010/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

8 years agoMIPS, Tracing: Fix set_graph_function of function graph tracer
Wu Zhangjin [Fri, 21 Jan 2011 18:01:53 +0000]
MIPS, Tracing: Fix set_graph_function of function graph tracer

trace.func should be set to the recorded ip of the mcount calling site
in the __mcount_loc section to filter the function entries configured
through the tracing/set_graph_function interface, but before, this is
set to the self_ra(the return address of mcount), which has made
set_graph_function not work as expected.

This fixes it via calculating the right recorded ip in the __mcount_loc
section and assign it to trace.func.

Reported-by: Zhiping Zhong <xzhong86@163.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2017/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>

8 years agoMIPS, Tracing: Clean up ftrace_make_nop()
Wu Zhangjin [Wed, 19 Jan 2011 19:28:31 +0000]
MIPS, Tracing: Clean up ftrace_make_nop()

This moves the comments out of ftrace_make_nop() and cleans it.  At the
same time, a macro MCOUNT_OFFSET_INSNS is defined for sharing with the
next patch.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2008/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>

8 years agoMIPS, Tracing: Clean up prepare_ftrace_return()
Wu Zhangjin [Wed, 19 Jan 2011 19:28:30 +0000]
MIPS, Tracing: Clean up prepare_ftrace_return()

The old prepare_ftrace_return() for MIPS is confused and have introduced
some problem. This patch cleans up the names of the arguments, variables
and related functions.

For MIPS, the 2nd argument of prepare_ftrace_return() is not really the
'selfpc' described in ftrace-design.txt but instead it is the self
return address. This did break the compatibility of the generic
interface but really reduced one unneeded calculation for to get the
current function name, the parent return address and the self return
address are enough, no need to tranform the self return address to the
self address.

But set_graph_function of function graph tracer is an exception, it does
need the 2nd argument of prepare_ftrace_return() as 'selfpc', for it
will use 'selfpc' to match user's configuration of function graph
entries, but in reality, it doesn't need the 'selfpc' but the recorded
ip address of the mcount calling site in the __mcount_loc section. So,
the 2nd argument of prepare_ftrace_return() is not important, the real
requirement is the right recorded ip address should be calculated and
assign to trace.func, this will be fixed in the next patches.

Reported-by: Zhiping Zhong <xzhong86@163.com>
Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2007/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>

8 years agoMIPS, Tracing: Substitute in_kernel_space() for in_module()
Wu Zhangjin [Wed, 19 Jan 2011 19:28:29 +0000]
MIPS, Tracing: Substitute in_kernel_space() for in_module()

The old in_module() may not work in some situations(e.g. when module &
kernel are in the same address space when CONFIG_MAPPED_KERNEL=y), The
in_kernel_space() is more generic and it is also easy to be implemented
via cloning the existing core_kernel_text(), so, replace the in_module()
with in_kernel_space().

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2005/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>

8 years agoMIPS, Tracing: Speed up function graph tracer
Wu Zhangjin [Wed, 19 Jan 2011 19:28:27 +0000]
MIPS, Tracing: Speed up function graph tracer

This simply moves the "ip-=4" statement down to the end of the do { ...
} while (...); loop, which reduces one unneeded subtration and the
subsequent memory loading and comparison.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: Steven Rostedt <srostedt@redhat.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2006/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>

8 years agoMIPS: Replace deprecated spinlock initialization
Thomas Gleixner [Sun, 23 Jan 2011 15:17:00 +0000]
MIPS: Replace deprecated spinlock initialization

SPIN_LOCK_UNLOCK is deprecated. Use the lockdep capable variant instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2025/
Signed-off-by: Ralf Baechle <ralf@duck.linux-mips.net>

8 years agocompat breakage in preadv() and pwritev()
Al Viro [Sun, 13 Mar 2011 23:24:46 +0000]
compat breakage in preadv() and pwritev()

Fix for a dumb preadv()/pwritev() compat bug - unlike the native
variants, the compat_...  ones forget to check FMODE_P{READ,WRITE}, so
e.g.  on pipe the native preadv() will fail with -ESPIPE and compat one
will act as readv() and succeed.

Not critical, but it's a clear bug with trivial fix, so IMO it's OK for
-final.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groec...
Linus Torvalds [Sun, 13 Mar 2011 23:01:11 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/staging:
  hwmon/f71882fg: Set platform drvdata to NULL later
  hwmon/f71882fg: Fix a typo in a comment

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
Linus Torvalds [Sun, 13 Mar 2011 23:00:49 +0000]
Merge git://git./linux/kernel/git/mason/btrfs-unstable

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: break out of shrink_delalloc earlier
  btrfs: fix not enough reserved space
  btrfs: fix dip leak
  Btrfs: make sure not to return overlapping extents to fiemap
  Btrfs: deal with short returns from copy_from_user
  Btrfs: fix regressions in copy_from_user handling

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Sun, 13 Mar 2011 23:00:28 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] target: Fix t_transport_aborted handling in LUN_RESET + active I/O shutdown

8 years agokbuild: Fix computing srcversion for modules
Michal Marek [Fri, 11 Mar 2011 21:34:47 +0000]
kbuild: Fix computing srcversion for modules

Recent change to fixdep:

    commit b7bd182176960fdd139486cadb9962b39f8a2b50
    Author: Michal Marek <mmarek@suse.cz>
    Date:   Thu Feb 17 15:13:54 2011 +0100

    fixdep: Do not record dependency on the source file itself

changed the format of the *.cmd files without realizing that it is also
used by modpost. Put the path to the source file to the file back, in a
special variable, so that modpost sees all source files when calculating
srcversion for modules.

Reported-and-tested-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge git://git.infradead.org/users/dwmw2/mtd-2.6.38
Linus Torvalds [Sun, 13 Mar 2011 22:56:22 +0000]
Merge git://git.infradead.org/users/dwmw2/mtd-2.6.38

* git://git.infradead.org/users/dwmw2/mtd-2.6.38:
  mtd: add "platform:" prefix for platform modalias
  mtd: mtd_blkdevs: fix double free on error path
  mtd: amd76xrom: fix oops at boot when resources are not available
  mtd: fix race in cfi_cmdset_0001 driver
  mtd: jedec_probe: initialise make sector erase command variable
  mtd: jedec_probe: Change variable name from cfi_p to cfi

8 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Sun, 13 Mar 2011 22:52:48 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/radeon: fix page flipping hangs on r300/r400
  drm/radeon: add pageflip hooks for fusion

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sun, 13 Mar 2011 22:50:37 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix mis-synchronisation in blkdev_issue_zeroout()

8 years agoMerge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sun, 13 Mar 2011 22:50:01 +0000]
Merge branch 'fix/asoc' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Ensure WM8958 gets all WM8994 late revision widgets
  ASoC: Fix typo in late revision WM8994 DAC2R name
  ASoC: Use the correct DAPM context when cleaning up final widget set
  ASoC: Fix broken bitfield definitions in WM8978
  ASoC: AM3517: Update codec name after multi-component update

8 years agogpio: add MODULE_DEVICE_TABLE
Axel Lin [Fri, 11 Mar 2011 22:58:30 +0000]
gpio: add MODULE_DEVICE_TABLE

The device table is required to load modules based on modaliases.

After adding MODULE_DEVICE_TABLE, below entries will be added to
modules.pcimap:

  pch_gpio             0x00008086 0x00008803 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0
  ml_ioh_gpio          0x000010db 0x0000802e 0xffffffff 0xffffffff 0x00000000 0x00000000 0x0

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agothp: fix page_referenced to modify mapcount/vm_flags only if page is found
Andrea Arcangeli [Fri, 11 Mar 2011 22:58:29 +0000]
thp: fix page_referenced to modify mapcount/vm_flags only if page is found

When vmscan.c calls page_referenced(), if an anon page was created
before a process forked, rmap will search for it in both of the
processes, even though one of them might have since broken COW.

If the child process mlocks the vma where the COWed page belongs to,
page_referenced() running on the page mapped by the parent would lead to
*vm_flags getting VM_LOCKED set erroneously (leading to the references
on the parent page being ignored and evicting the parent page too
early).

*mapcount would also be decremented by page_referenced_one even if the
page wasn't found by page_check_address.

This also lets pmdp_clear_flush_young_notify() go ahead on a
pmd_trans_splitting() pmd.

We hold the page_table_lock so __split_huge_page_map() must wait the
pmdp_clear_flush_young_notify() to complete before it can modify the
pmd.  The pmd is also still mapped in userland so the young bit may
materialize through a tlb miss before split_huge_page_map runs.

This will provide a more accurate page_referenced() behavior during
split_huge_page().

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Rik van Riel<riel@redhat.com>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agohwmon/f71882fg: Set platform drvdata to NULL later
Hans de Goede [Sun, 13 Mar 2011 12:50:33 +0000]
hwmon/f71882fg: Set platform drvdata to NULL later

This avoids a possible race leading to trying to dereference NULL.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agohwmon/f71882fg: Fix a typo in a comment
Hans de Goede [Sun, 13 Mar 2011 12:50:32 +0000]
hwmon/f71882fg: Fix a typo in a comment

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agodrm/radeon: fix page flipping hangs on r300/r400
Dave Airlie [Fri, 11 Mar 2011 11:17:41 +0000]
drm/radeon: fix page flipping hangs on r300/r400

We've been getting reports of complete system lockups with rv3xx hw on
AGP and PCIE when running gnome-shell or kwin with compositing.

It appears the hw really doesn't like setting these registers while
stuff is running, this moves the setting of the registers into the modeset
since they aren't required to be changed anywhere else.

fixes: https://bugs.freedesktop.org/show_bug.cgi?id=35183

Reported-and-tested-by: Álmos <aaalmosss@gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoBtrfs: break out of shrink_delalloc earlier
Chris Mason [Sat, 12 Mar 2011 12:08:42 +0000]
Btrfs: break out of shrink_delalloc earlier

Josef had changed shrink_delalloc to exit after three shrink
attempts, which wasn't quite enough because new writers could
race in and steal free space.

But it also fixed deadlocks and stalls as we tried to recover
delalloc reservations.  The code was tweaked to loop 1024
times, and would reset the counter any time a small amount
of progress was made.  This was too drastic, and with a
lot of writers we can end up stuck in shrink_delalloc forever.

The shrink_delalloc loop is fairly complex because the caller is looping
too, and the caller will go ahead and force a transaction commit to make
sure we reclaim space.

This reworks things to exit shrink_delalloc when we've forced some
writeback and the delalloc reservations have gone down.  This means
the writeback has not just started but has also finished at
least some of the metadata changes required to reclaim delalloc
space.

If we've got this wrong, we're returning ENOSPC too early, which
is a big improvement over the current behavior of hanging the machine.

Test 224 in xfstests hammers on this nicely, and with 1000 writers
trying to fill a 1GB drive we get our first ENOSPC at 93% full.  The
other writers are able to continue until we get 100%.

This is a worst case test for btrfs because the 1000 writers are doing
small IO, and the small FS size means we don't have a lot of room
for metadata chunks.

Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoblock: fix mis-synchronisation in blkdev_issue_zeroout()
Lukas Czerner [Fri, 11 Mar 2011 09:23:53 +0000]
block: fix mis-synchronisation in blkdev_issue_zeroout()

BZ29402
https://bugzilla.kernel.org/show_bug.cgi?id=29402

We can hit serious mis-synchronization in bio completion path of
blkdev_issue_zeroout() leading to a panic.

The problem is that when we are going to wait_for_completion() in
blkdev_issue_zeroout() we check if the bb.done equals issued (number of
submitted bios). If it does, we can skip the wait_for_completition()
and just out of the function since there is nothing to wait for.
However, there is a ordering problem because bio_batch_end_io() is
calling atomic_inc(&bb->done) before complete(), hence it might seem to
blkdev_issue_zeroout() that all bios has been completed and exit. At
this point when bio_batch_end_io() is going to call complete(bb->wait),
bb and wait does not longer exist since it was allocated on stack in
blkdev_issue_zeroout() ==> panic!

(thread 1)                      (thread 2)
bio_batch_end_io()              blkdev_issue_zeroout()
  if(bb) {                      ...
    if (bb->end_io)             ...
      bb->end_io(bio, err);     ...
    atomic_inc(&bb->done);      ...
    ...                         while (issued != atomic_read(&bb.done))
    ...                         (let issued == bb.done)
    ...                         (do the rest of the function)
    ...                         return ret;
    complete(bb->wait);
    ^^^^^^^^
    panic

We can fix this easily by simplifying bio_batch and completion counting.

Also remove bio_end_io_t *end_io since it is not used.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Reported-by: Eric Whitney <eric.whitney@hp.com>
Tested-by: Eric Whitney <eric.whitney@hp.com>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
CC: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agomtd: add "platform:" prefix for platform modalias
Axel Lin [Mon, 7 Mar 2011 03:04:24 +0000]
mtd: add "platform:" prefix for platform modalias

Since 43cc71eed1250755986da4c0f9898f9a635cb3bf (platform: prefix MODALIAS
with "platform:"), the platform modalias is prefixed with "platform:".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

8 years agomtd: mtd_blkdevs: fix double free on error path
Maxim Levitsky [Sat, 8 Jan 2011 23:25:06 +0000]
mtd: mtd_blkdevs: fix double free on error path

This one liner patch fixes double free that will occur if add_mtd_blktrans_dev
fails. On failure it frees the input argument, but all its users also free it
on error which is natural thing to do. Thus don't free it.

All credit for finding that bug belongs to reporters of the bug in the android bugzilla
http://code.google.com/p/android/issues/detail?id=13761

Commit message tweaked by Artem.

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

8 years agomtd: amd76xrom: fix oops at boot when resources are not available
Stanislaw Gruszka [Sat, 8 Jan 2011 14:24:37 +0000]
mtd: amd76xrom: fix oops at boot when resources are not available

For some unknown reasons resources needed by amd76xrom driver can be
unavailable. And instead of returning an error, the driver keeps going
and crash the kernel. This patch fixes the problem by making the driver
return -EBUSY if the resources are not available.

Commit messages tweaked by Artem.

Reported-by: Russell Whitaker <russ@ashlandhome.net>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

8 years agomtd: fix race in cfi_cmdset_0001 driver
Joakim Tjernlund [Mon, 7 Feb 2011 16:07:11 +0000]
mtd: fix race in cfi_cmdset_0001 driver

As inval_cache_and_wait_for_operation() drop and reclaim the lock
to invalidate the cache, some other thread may suspend the operation
before reaching the for(;;) loop. Therefore the loop must start with
checking the chip->state before reading status from the chip.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Acked-by: Michael Cashwell <mboards@prograde.net>
Acked-by: Stefan Bigler <stefan.bigler@keymile.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org

8 years agomtd: jedec_probe: initialise make sector erase command variable
Antony Pavlov [Fri, 11 Feb 2011 10:00:37 +0000]
mtd: jedec_probe: initialise make sector erase command variable

In the commit 08968041bef437ec363623cd3218c2b083537ada
 (mtd: cfi_cmdset_0002: make sector erase command variable)
introdused a field sector_erase_cmd. In the same commit initialisation
of cfi->sector_erase_cmd made in cfi_chip_setup()
(file drivers/mtd/chips/cfi_probe.c), so the CFI chip has no problem:

...
        cfi->cfi_mode = CFI_MODE_CFI;
        cfi->sector_erase_cmd = CMD(0x30);
...

But for the JEDEC chips this initialisation is not carried out,
so the JEDEC chips have sector_erase_cmd == 0.

This patch adds the missing initialisation.

Signed-off-by: Antony Pavlov <antony@niisi.msk.ru>
Acked-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
CC: stable@kernel.org

8 years agomtd: jedec_probe: Change variable name from cfi_p to cfi
Antony Pavlov [Fri, 11 Feb 2011 10:00:37 +0000]
mtd: jedec_probe: Change variable name from cfi_p to cfi

In the following commit, we'll need to use the CMD() macro in order to
fix the initialisation of the sector_erase_cmd field. That requires the
local variable to be called 'cfi', so change it first in a simple patch.

Signed-off-by: Antony Pavlov <antony@niisi.msk.ru>
Acked-by: Guillaume LECERF <glecerf@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
CC: stable@kernel.org

8 years agodrm/radeon: add pageflip hooks for fusion
Dave Airlie [Fri, 11 Mar 2011 00:04:23 +0000]
drm/radeon: add pageflip hooks for fusion

Looks like these got passed over with both being merged at the same
time but not quite meeting in the middle.

should fix: https://bugs.freedesktop.org/show_bug.cgi?id=34137
along with Michael's phoronix article.

Reported-by: Chi-Thanh Christopher Nguyen
Article-written-by: Michael Larabel @ phoronix
Signed-off-by: Dave Airlie <airlied@redhat.com>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 11 Mar 2011 00:30:21 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  ariadne: remove redundant NULL check
  ip6ip6: autoload ip6 tunnel
  net: bridge builtin vs. ipv6 modular
  ipv6: Don't create clones of host routes.
  pktgen: fix errata in show results
  ipv4: Fix erroneous uses of ifa_address.
  vxge: update MAINTAINERS
  r6040: bump to version 0.27 and date 23Feb2011
  r6040: fix multicast operations
  rds: prevent BUG_ON triggering on congestion map updates
  bonding 802.3ad: Rename rx_machine_lock to state_machine_lock
  bonding 802.3ad: Fix the state machine locking v2
  drivers/net/macvtap: fix error check
  net: fix multithreaded signal handling in unix recv routines
  net: Enter net/ipv6/ even if CONFIG_IPV6=n
  net/smsc911x.c: Set the VLAN1 register to fix VLAN MTU problem
  bnx2x: fix MaxBW configuration
  bnx2x: (NPAR) prevent HW access in D3 state
  bnx2x: fix link notification
  bnx2x: fix non-pmf device load flow

Doing my first --no-ff merge here, to get the explicit merge commit.

David did a back-merge in order to get commit 8909c9ad8ff0 ("net: don't
allow CAP_NET_ADMIN to load non-netdev kernel modules") so that we can
add Stephen Hemminger's fix to handle ip6 tunnels as well, which uses
the MODULE_ALIAS_NETDEV() macro created by that change.

8 years agoariadne: remove redundant NULL check
j223yang@asset.uwaterloo.ca [Thu, 10 Mar 2011 12:36:37 +0000]
ariadne: remove redundant NULL check

Simply remove redundant 'dev' NULL check.

Signed-off-by: Jinqiu Yang <crindy646@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoip6ip6: autoload ip6 tunnel
stephen hemminger [Thu, 10 Mar 2011 11:43:19 +0000]
ip6ip6: autoload ip6 tunnel

Add necessary alias to autoload ip6ip6 tunnel module.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Thu, 10 Mar 2011 22:00:44 +0000]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

8 years agonet: bridge builtin vs. ipv6 modular
Randy Dunlap [Thu, 10 Mar 2011 21:45:57 +0000]
net: bridge builtin vs. ipv6 modular

When configs BRIDGE=y and IPV6=m, this build error occurs:

br_multicast.c:(.text+0xa3341): undefined reference to `ipv6_dev_get_saddr'

BRIDGE_IGMP_SNOOPING is boolean; if it were tristate, then adding
depends on IPV6 || IPV6=n
to BRIDGE_IGMP_SNOOPING would be a good fix.  As it is currently,
making BRIDGE depend on the IPV6 config works.

Reported-by: Patrick Schaaf <netdev@bof.de>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Thu, 10 Mar 2011 21:22:10 +0000]
Merge branch 'media_fixes' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
  [media] mantis_pci: remove asm/pgtable.h include
  [media] tda829x: fix regression in probe functions
  [media] mceusb: don't claim multifunction device non-IR parts
  [media] nuvoton-cir: fix wake from suspend
  [media] cx18: Add support for Hauppauge HVR-1600 models with s5h1411
  [media] ivtv: Fix corrective action taken upon DMA ERR interrupt to avoid hang
  [media] cx25840: fix probing of cx2583x chips
  [media] cx23885: Remove unused 'err:' labels to quiet compiler warning
  [media] cx23885: Revert "Check for slave nack on all transactions"
  [media] DiB7000M: add pid filtering
  [media] Fix sysfs rc protocol lookup for rc-5-sz
  [media] au0828: fix VBI handling when in V4L2 streaming mode
  [media] ir-raw: Properly initialize the IR event (BZ#27202)
  [media] s2255drv: firmware re-loading changes
  [media] Fix double free of video_device in mem2mem_testdev
  [media] DM04/QQBOX memcpy to const char fix

8 years agoipmi: Fix IPMI errors due to timing problems
Doe, YiCheng [Thu, 10 Mar 2011 20:00:21 +0000]
ipmi: Fix IPMI errors due to timing problems

This patch fixes an issue in OpenIPMI module where sometimes an ABORT command
is sent after sending an IPMI request to BMC causing the IPMI request to fail.

Signed-off-by: YiCheng Doe <yicheng.doe@hp.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Tom Mingarelli <thomas.mingarelli@hp.com>
Tested-by: Andy Cress <andy.cress@us.kontron.com>
Tested-by: Mika Lansirine <Mika.Lansirinne@stonesoft.com>
Tested-by: Brian De Wolf <bldewolf@csupomona.edu>
Cc: Jean Michel Audet <Jean-Michel.Audet@ca.Kontron.com>
Cc: Jozef Sudelsky <jozef.sudolsky@elbiahosting.sk>
Acked-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Thu, 10 Mar 2011 21:16:01 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  fs/dcache: allow d_obtain_alias() to return unhashed dentries
  Check for immutable/append flag in fallocate path
  sysctl: the include of rcupdate.h is only needed in the kernel
  fat: fix d_revalidate oopsen on NFS exports
  jfs: fix d_revalidate oopsen on NFS exports
  ocfs2: fix d_revalidate oopsen on NFS exports
  gfs2: fix d_revalidate oopsen on NFS exports
  fuse: fix d_revalidate oopsen on NFS exports
  ceph: fix d_revalidate oopsen on NFS exports
  reiserfs xattr ->d_revalidate() shouldn't care about RCU
  /proc/self is never going to be invalidated...

8 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Thu, 10 Mar 2011 21:09:26 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, UV: Initialize the broadcast assist unit base destination node id properly
  x86, numa: Fix numa_emulation code with memory-less node0
  x86, build: Make sure mkpiggy fails on read error

8 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Thu, 10 Mar 2011 21:08:59 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix sched rt group scheduling when hierachy is enabled

8 years agoMerge branch 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
Linus Torvalds [Thu, 10 Mar 2011 21:07:38 +0000]
Merge branch 'perf/urgent' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf symbols: Avoid resolving [kernel.kallsyms] to real path for buildid cache
  perf symbols: Fix vmlinux path when not using --symfs

8 years agodrm/i915: Revive combination mode for backlight control
Takashi Iwai [Thu, 10 Mar 2011 13:02:12 +0000]
drm/i915: Revive combination mode for backlight control

This reverts commit 951f3512dba5bd44cda3e5ee22b4b522e4bb09fb

    drm/i915: Do not handle backlight combination mode specially

since this commit introduced other regressions due to untouched LBPC
register, e.g. the backlight dimmed after resume.

In addition to the revert, this patch includes a fix for the original
issue (weird backlight levels) by removing the wrong bit shift for
computing the current backlight level.
Also, including typo fixes (lpbc -> lbpc).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=34524
Acked-by: Indan Zupancic <indan@nul.nu>
Reviewed-by: Keith Packard <keithp@keithp.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agobtrfs: fix not enough reserved space
Miao Xie [Fri, 18 Feb 2011 09:21:17 +0000]
btrfs: fix not enough reserved space

btrfs_link() will insert 3 items(inode ref, dir name item and dir index item)
into the b+ tree and update 2 items(its inode, and parent's inode) in the b+
tree. So we should reserve space for these 5 items, not 3 items.

Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agobtrfs: fix dip leak
Daniel J Blueman [Wed, 9 Mar 2011 16:46:42 +0000]
btrfs: fix dip leak

The btrfs DIO code leaks dip structs when dip->csums allocation
fails; bio->bi_end_io isn't set at the point where the free_ordered
branch is consequently taken, thus bio_endio doesn't call the function
which would free it in the normal case. Fix.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Acked-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

8 years agoMerge branch 'for-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Takashi Iwai [Thu, 10 Mar 2011 15:03:09 +0000]
Merge branch 'for-2.6.38' of git://git./linux/kernel/git/broonie/sound-2.6 into fix/asoc

8 years agofs/dcache: allow d_obtain_alias() to return unhashed dentries
J. Bruce Fields [Tue, 18 Jan 2011 20:45:09 +0000]
fs/dcache: allow d_obtain_alias() to return unhashed dentries

Without this patch, inodes are not promptly freed on last close of an
unlinked file by an nfs client:

client$ mount -tnfs4 server:/export/ /mnt/
client$ tail -f /mnt/FOO
...
server$ df -i /export
server$ rm /export/FOO
(^C the tail -f)
server$ df -i /export
server$ echo 2 >/proc/sys/vm/drop_caches
server$ df -i /export

the df's will show that the inode is not freed on the filesystem until
the last step, when it could have been freed after killing the client's
tail -f. On-disk data won't be deallocated either, leading to possible
spurious ENOSPC.

This occurs because when the client does the close, it arrives in a
compound with a putfh and a close, processed like:

- putfh: look up the filehandle.  The only alias found for the
  inode will be DCACHE_UNHASHED alias referenced by the filp
  this, so it creates a new DCACHE_DISCONECTED dentry and
  returns that instead.
- close: closes the existing filp, which is destroyed
  immediately by dput() since it's DCACHE_UNHASHED.
- end of the compound: release the reference
  to the current filehandle, and dput() the new
  DCACHE_DISCONECTED dentry, which gets put on the
  unused list instead of being destroyed immediately.

Nick Piggin suggested fixing this by allowing d_obtain_alias to return
the unhashed dentry that is referenced by the filp, instead of making it
create a new dentry.

Leave __d_find_alias() alone to avoid changing behavior of other
callers.

Also nfsd doesn't need all the checks of __d_find_alias(); any dentry,
hashed or unhashed, disconnected or not, should work.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoCheck for immutable/append flag in fallocate path
Marco Stornelli [Sat, 5 Mar 2011 10:10:19 +0000]
Check for immutable/append flag in fallocate path

In the fallocate path the kernel doesn't check for the immutable/append
flag. It's possible to have a race condition in this scenario: an
application open a file in read/write and it does something, meanwhile
root set the immutable flag on the file, the application at that point
can call fallocate with success. In addition, we don't allow to do any
unreserve operation on an append only file but only the reserve one.

Signed-off-by: Marco Stornelli <marco.stornelli@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agosysctl: the include of rcupdate.h is only needed in the kernel
Stephen Rothwell [Thu, 10 Mar 2011 00:25:43 +0000]
sysctl: the include of rcupdate.h is only needed in the kernel

Fixes this built error:

include/linux/sysctl.h:28: included file 'linux/rcupdate.h' is not exported

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agofat: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:45:49 +0000]
fat: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agojfs: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:45:28 +0000]
jfs: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoocfs2: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:45:07 +0000]
ocfs2: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agogfs2: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:44:48 +0000]
gfs2: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agofuse: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:44:31 +0000]
fuse: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoceph: fix d_revalidate oopsen on NFS exports
Al Viro [Thu, 10 Mar 2011 08:44:05 +0000]
ceph: fix d_revalidate oopsen on NFS exports

can't blindly check nd->flags in ->d_revalidate()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoreiserfs xattr ->d_revalidate() shouldn't care about RCU
Al Viro [Wed, 16 Feb 2011 15:14:56 +0000]
reiserfs xattr ->d_revalidate() shouldn't care about RCU

... it returns an error unconditionally

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years ago/proc/self is never going to be invalidated...
Al Viro [Wed, 16 Feb 2011 15:04:50 +0000]
/proc/self is never going to be invalidated...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

8 years agoipv6: Don't create clones of host routes.
David S. Miller [Thu, 10 Mar 2011 03:55:25 +0000]
ipv6: Don't create clones of host routes.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=29252
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=30462

In commit d80bc0fd262ef840ed4e82593ad6416fa1ba3fc4 ("ipv6: Always
clone offlink routes.") we forced the kernel to always clone offlink
routes.

The reason we do that is to make sure we never bind an inetpeer to a
prefixed route.

The logic turned on here has existed in the tree for many years,
but was always off due to a protecting CPP define.  So perhaps
it's no surprise that there is a logic bug here.

The problem is that we canot clone a route that is already a
host route (ie. has DST_HOST set).  Because if we do, an identical
entry already exists in the routing tree and therefore the
ip6_rt_ins() call is going to fail.

This sets off a series of failures and high cpu usage, because when
ip6_rt_ins() fails we loop retrying this operation a few times in
order to handle a race between two threads trying to clone and insert
the same host route at the same time.

Fix this by simply using the route as-is when DST_HOST is set.

Reported-by: slash@ac.auone-net.jp
Reported-by: Ernst Sjöstrand <ernstp@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Thu, 10 Mar 2011 00:46:06 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/pseries: Disable VPNH feature
  powerpc/iseries: Fix early init access to lppaca

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 10 Mar 2011 00:45:02 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
  net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules

8 years agosysctl: the include of rcupdate.h is only needed in the kernel
Stephen Rothwell [Thu, 10 Mar 2011 00:14:17 +0000]
sysctl: the include of rcupdate.h is only needed in the kernel

Fixes this build-check error:

  include/linux/sysctl.h:28: included file 'linux/rcupdate.h' is not exported

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agonet: don't allow CAP_NET_ADMIN to load non-netdev kernel modules
Vasiliy Kulikov [Tue, 1 Mar 2011 21:33:13 +0000]
net: don't allow CAP_NET_ADMIN to load non-netdev kernel modules

Since a8f80e8ff94ecba629542d9b4b5f5a8ee3eb565c any process with
CAP_NET_ADMIN may load any module from /lib/modules/.  This doesn't mean
that CAP_NET_ADMIN is a superset of CAP_SYS_MODULE as modules are
limited to /lib/modules/**.  However, CAP_NET_ADMIN capability shouldn't
allow anybody load any module not related to networking.

This patch restricts an ability of autoloading modules to netdev modules
with explicit aliases.  This fixes CVE-2011-1019.

Arnd Bergmann suggested to leave untouched the old pre-v2.6.32 behavior
of loading netdev modules by name (without any prefix) for processes
with CAP_SYS_MODULE to maintain the compatibility with network scripts
that use autoloading netdev modules by aliases like "eth0", "wlan0".

Currently there are only three users of the feature in the upstream
kernel: ipip, ip_gre and sit.

    root@albatros:~# capsh --drop=$(seq -s, 0 11),$(seq -s, 13 34) --
    root@albatros:~# grep Cap /proc/$$/status
    CapInh: 0000000000000000
    CapPrm: fffffff800001000
    CapEff: fffffff800001000
    CapBnd: fffffff800001000
    root@albatros:~# modprobe xfs
    FATAL: Error inserting xfs
    (/lib/modules/2.6.38-rc6-00001-g2bf4ca3/kernel/fs/xfs/xfs.ko): Operation not permitted
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit
    sit: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep sit
    root@albatros:~# ifconfig sit0
    sit0      Link encap:IPv6-in-IPv4
      NOARP  MTU:1480  Metric:1

    root@albatros:~# lsmod | grep sit
    sit                    10457  0
    tunnel4                 2957  1 sit

For CAP_SYS_MODULE module loading is still relaxed:

    root@albatros:~# grep Cap /proc/$$/status
    CapInh: 0000000000000000
    CapPrm: ffffffffffffffff
    CapEff: ffffffffffffffff
    CapBnd: ffffffffffffffff
    root@albatros:~# ifconfig xfs
    xfs: error fetching interface information: Device not found
    root@albatros:~# lsmod | grep xfs
    xfs                   745319  0

Reference: https://lkml.org/lkml/2011/2/24/203

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Acked-by: David S. Miller <davem@davemloft.net>
Acked-by: Kees Cook <kees.cook@canonical.com>
Signed-off-by: James Morris <jmorris@namei.org>

8 years agopowerpc/pseries: Disable VPNH feature
Benjamin Herrenschmidt [Wed, 9 Mar 2011 13:00:14 +0000]
powerpc/pseries: Disable VPNH feature

This feature triggers nasty races in the scheduler between the
rebuilding of the topology and the load balancing code, causing
the machine to hang.

Disable it for now until the races are fixed.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

8 years agopowerpc/iseries: Fix early init access to lppaca
Benjamin Herrenschmidt [Sun, 6 Mar 2011 18:02:31 +0000]
powerpc/iseries: Fix early init access to lppaca

The combination of commit

8154c5d22d91cd16bd9985b0638c8957e4688d0e and
93c22703efa72c7527dbd586d1951c1f4a85fd70

Broke boot on iSeries.

The problem is that iSeries very early boot code, which generates
the device-tree and runs before our normal early initializations
does need access the lppaca's very early, before the PACA array is
initialized, and in fact even before the boot PACA has been
initialized (it contains all 0's at this stage).

However, the first patch above makes that code use the new
llpaca_of(cpu) accessor, which itself is changed by the second patch to
use the PACA array.

We fix that by reverting iSeries to directly dereferencing the array. In
addition, we fix all iterators in the iSeries code to always skip CPU
whose number is above 63 which is the maximum size of that array and
the maximum number of supported CPUs on these machines.

Additionally, we make sure the boot_paca is properly initialized
in our early startup code.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

8 years agoMerge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Wed, 9 Mar 2011 22:52:09 +0000]
Merge branch 'for-2.6.38' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.38' of git://linux-nfs.org/~bfields/linux:
  nfsd: wrong index used in inner loop
  nfsd4: fix bad pointer on failure to find delegation
  NFSD: fix decode_cb_sequence4resok

8 years agopktgen: fix errata in show results
Daniel Turull [Wed, 9 Mar 2011 22:11:00 +0000]
pktgen: fix errata in show results

The units in show_results in pktgen were not correct.
The results are in usec but it was displayed nsec.

Reported-by: Jong-won Lee <ljw@handong.edu>
Signed-off-by: Daniel Turull <daniel.turull@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Wed, 9 Mar 2011 22:04:40 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAME

8 years agoMerge branch 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Wed, 9 Mar 2011 22:03:59 +0000]
Merge branch 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux

* 'for-2639-rc7/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-eg20t: include slab.h for memory allocations
  i2c-ocores: Fix pointer type mismatch error
  i2c-omap: Program I2C_WE on OMAP4 to enable i2c wakeup

8 years agoalpha: fix compile error from IRQ clean up
Matt Turner [Wed, 9 Mar 2011 16:15:13 +0000]
alpha: fix compile error from IRQ clean up

Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Wed, 9 Mar 2011 22:01:42 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] pcc-cpufreq: don't load driver if get_freq fails during init.

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc
Linus Torvalds [Wed, 9 Mar 2011 22:00:44 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
  mmc: fix CONFIG_MMC_UNSAFE_RESUME regression

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Wed, 9 Mar 2011 21:55:51 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  nd->inode is not set on the second attempt in path_walk()
  unfuck proc_sysctl ->d_compare()
  minimal fix for do_filp_open() race

8 years agowatchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAME
Jiri Slaby [Mon, 28 Feb 2011 09:16:29 +0000]
watchdog: sbc_fitpc2_wdt, fix crash on systems without DMI_BOARD_NAME

Some systems don't provide DMI_BOARD_NAME in their DMI tables. Avoid
crash in such situations in fitpc2_wdt_init.

The fix is to check if the dmi_get_system_info return value is NULL.

The oops:
BUG: unable to handle kernel NULL pointer dereference at           (null)
IP: [<ffffffff81253ae6>] strstr+0x26/0xa0
PGD 3966e067 PUD 39605067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu1/cache/index2/shared_cpu_map
CPU 1
Modules linked in: ...
Pid: 1748, comm: modprobe Not tainted 2.6.37-22-default #1 /Bochs
RIP: 0010:[<ffffffff81253ae6>]  [<ffffffff81253ae6>] strstr+0x26/0xa0
RSP: 0018:ffff88003ad73f18  EFLAGS: 00010206
RAX: 0000000000000000 RBX: 00000000ffffffed RCX: 00000000ffffffff
RDX: ffffffffa003f4cc RSI: ffffffffa003f4c2 RDI: 0000000000000000
...
CR2: 0000000000000000 CR3: 000000003b7ac000 CR4: 00000000000006e0
...
Process modprobe (pid: 1748, threadinfo ffff88003ad72000, task ffff88002e6365c0)
Stack: ...
Call Trace:
 [<ffffffffa004201f>] fitpc2_wdt_init+0x1f/0x13c [sbc_fitpc2_wdt]
 [<ffffffff810002da>] do_one_initcall+0x3a/0x170
...
Code: f3 c3 0f 1f 00 80 3e 00 53 48 89 f8 74 1b 48 89 f2 0f 1f 40 00 48 83 c2 01 80 3a 00 75 f7 49 89 d0 48 89 f8 49 29 f0 75 02 5b c3 <80> 3f 00 74 0e 0f 1f 44 00 00 48 83 c0 01 80 38 00 75 f7 49 89

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

8 years agoipv4: Fix erroneous uses of ifa_address.
David S. Miller [Wed, 9 Mar 2011 21:27:16 +0000]
ipv4: Fix erroneous uses of ifa_address.

In usual cases ifa_address == ifa_local, but in the case where
SIOCSIFDSTADDR sets the destination address on a point-to-point
link, ifa_address gets set to that destination address.

Therefore we should use ifa_local when we want the local interface
address.

There were two cases where the selection was done incorrectly:

1) When devinet_ioctl() does matching, it checks ifa_address even
   though gifconf correct reported ifa_local to the user

2) IN_DEV_ARP_NOTIFY handling sends a gratuitous ARP using
   ifa_address instead of ifa_local.

Reported-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoASoC: Ensure WM8958 gets all WM8994 late revision widgets
Mark Brown [Wed, 9 Mar 2011 19:10:15 +0000]
ASoC: Ensure WM8958 gets all WM8994 late revision widgets

Without this fix the driver won't instantiate properly on relevant
devices.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org

8 years agoASoC: Fix typo in late revision WM8994 DAC2R name
Mark Brown [Wed, 9 Mar 2011 19:09:17 +0000]
ASoC: Fix typo in late revision WM8994 DAC2R name

Without this fix the driver won't instantiate properly on relevant
devices.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Cc: stable@kernel.org

8 years ago[CPUFREQ] pcc-cpufreq: don't load driver if get_freq fails during init.
Naga Chumbalkar [Wed, 9 Mar 2011 14:02:49 +0000]
[CPUFREQ] pcc-cpufreq: don't load driver if get_freq fails during init.

Return 0 on failure. This will cause the initialization of the driver
to fail and prevent the driver from loading if the BIOS cannot handle
the PCC interface command to "get frequency". Otherwise, the driver
will load and display a very high value like "4294967274" (which is
actually -EINVAL) for frequency:

# cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq
4294967274

Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
CC: stable@kernel.org
Signed-off-by: Dave Jones <davej@redhat.com>

8 years agoperf symbols: Avoid resolving [kernel.kallsyms] to real path for buildid cache
Lin Ming [Thu, 3 Mar 2011 15:23:57 +0000]
perf symbols: Avoid resolving [kernel.kallsyms] to real path for buildid cache

kallsyms has a virtual file name [kernel.kallsyms].  Currently, it can't
be added to buildid cache successfully because the code
(build_id_cache__add_s) tries to resolve [kernel.kallsyms] to a real
absolute pathname and that fails.

Fixes it by not resolving it and just use the name [kernel.kallsyms].
So dir ~/.debug/[kernel.kallsyms] is created.

Original bug report at:
https://lkml.org/lkml/2011/3/1/524

Tested-by: Han Pingtian <phan@redhat.com>
Cc: Han Pingtian <phan@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1299165837-27817-1-git-send-email-ming.m.lin@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

8 years agox86, UV: Initialize the broadcast assist unit base destination node id properly
Cliff Wickman [Wed, 9 Mar 2011 14:15:57 +0000]
x86, UV: Initialize the broadcast assist unit base destination node id properly

The BAU's initialization of the broadcast description header is
lacking the coherence domain (high bits) in the nasid.  This
causes a catastrophic system failure when running on a system
with multiple coherence domains.

Signed-off-by: Cliff Wickman <cpw@sgi.com>
LKML-Reference: <E1PxKBB-0005F0-3U@eag09.americas.sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agoASoC: Use the correct DAPM context when cleaning up final widget set
Mark Brown [Tue, 8 Mar 2011 19:29:53 +0000]
ASoC: Use the correct DAPM context when cleaning up final widget set

Now we've got multi-component we need to make sure that the DAPM context
(and hence register I/O context) we use to apply the pending updates at
the end of a DAPM sequence is the one we were processing rather than the
one that was used to initate the state change.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

8 years agoASoC: Fix broken bitfield definitions in WM8978
Mark Brown [Wed, 2 Mar 2011 11:01:18 +0000]
ASoC: Fix broken bitfield definitions in WM8978

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Cc: stable@kernel.org

8 years agoASoC: AM3517: Update codec name after multi-component update
Abhilash K V [Tue, 8 Mar 2011 15:32:43 +0000]
ASoC: AM3517: Update codec name after multi-component update

The i2c client device name (".2-001a" in this case, including
the separator period) for the AIC23 codec on the TI AM3517-EVM
was appended to the codec_name member of am3517evm_dai to
resolve the names mismatch happening in soc_bind_dai_link(),
due to which the card was not getting registered.

Signed-off-by: Abhilash K V <abhilash.kv@ti.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>