8 years agoipv4: fix multicast losses
Eric Dumazet [Sat, 18 Jun 2011 18:59:18 +0000]
ipv4: fix multicast losses

Knut Tidemann found that first packet of a multicast flow was not
correctly received, and bisected the regression to commit b23dd4fe42b4
(Make output route lookup return rtable directly.)

Special thanks to Knut, who provided a very nice bug report, including
sample programs to demonstrate the bug.

Reported-and-bisectedby: Knut Tidemann <knut.andre.tidemann@jotron.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoinet_diag: fix inet_diag_bc_audit()
Eric Dumazet [Fri, 17 Jun 2011 20:25:39 +0000]
inet_diag: fix inet_diag_bc_audit()

A malicious user or buggy application can inject code and trigger an
infinite loop in inet_diag_bc_audit()

Also make sure each instruction is aligned on 4 bytes boundary, to avoid
unaligned accesses.

Reported-by: Dan Rosenberg <drosenberg@vsecurity.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agogigaset: call module_put before restart of if_open()
Pavel Shved [Fri, 17 Jun 2011 06:25:11 +0000]
gigaset: call module_put before restart of if_open()

if_open() calls try_module_get(), and after an attempt to lock a mutex
the if_open() function may return -ERESTARTSYS without
putting the module.  Then, when if_open() is executed again,
try_module_get() is called making the reference counter of THIS_MODULE
greater than one at successful exit from if_open().  The if_close()
function puts the module only once, and as a result it can't be
unloaded.

This patch adds module_put call before the return from if_open().

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Shved <shved@ispras.ru>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agofarsync: add module_put to error path in fst_open()
Pavel Shved [Fri, 17 Jun 2011 06:25:10 +0000]
farsync: add module_put to error path in fst_open()

The fst_open() function, after a successful try_module_get() may return
an error code if hdlc_open() returns it.  However, it does not put the
module on this error path.

This patch adds the necessary module_put() call.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Pavel Shved <shved@ispras.ru>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agonet: rfs: enable RFS before first data packet is received
Eric Dumazet [Fri, 17 Jun 2011 03:45:15 +0000]
net: rfs: enable RFS before first data packet is received

Le jeudi 16 juin 2011 à 23:38 -0400, David Miller a écrit :
> From: Ben Hutchings <bhutchings@solarflare.com>
> Date: Fri, 17 Jun 2011 00:50:46 +0100
>
> > On Wed, 2011-06-15 at 04:15 +0200, Eric Dumazet wrote:
> >> @@ -1594,6 +1594,7 @@ int tcp_v4_do_rcv(struct sock *sk, struct sk_buff *skb)
> >>   goto discard;
> >>
> >>   if (nsk != sk) {
> >> + sock_rps_save_rxhash(nsk, skb->rxhash);
> >>   if (tcp_child_process(sk, nsk, skb)) {
> >>   rsk = nsk;
> >>   goto reset;
> >>
> >
> > I haven't tried this, but it looks reasonable to me.
> >
> > What about IPv6?  The logic in tcp_v6_do_rcv() looks very similar.
>
> Indeed ipv6 side needs the same fix.
>
> Eric please add that part and resubmit.  And in fact I might stick
> this into net-2.6 instead of net-next-2.6
>

OK, here is the net-2.6 based one then, thanks !

[PATCH v2] net: rfs: enable RFS before first data packet is received

First packet received on a passive tcp flow is not correctly RFS
steered.

One sock_rps_record_flow() call is missing in inet_accept()

But before that, we also must record rxhash when child socket is setup.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Tom Herbert <therbert@google.com>
CC: Ben Hutchings <bhutchings@solarflare.com>
CC: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agofs_enet: fix freescale FCC ethernet dp buffer alignment
Clive Stubbings [Thu, 16 Jun 2011 22:30:39 +0000]
fs_enet: fix freescale FCC ethernet dp buffer alignment

The RIPTR and TIPTR  (receive/transmit internal temporary data pointer),
used by microcode as a temporary buffer for data, must be 32-byte aligned
according to the RM for MPC8247.

Tested on mgcoge.

Signed-off-by: Clive Stubbings <clive.stubbings@xentech.co.uk>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Pantelis Antoniou <pantelis.antoniou@gmail.com>
cc: Vitaly Bordug <vbordug@ru.mvista.com>
cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Fri, 17 Jun 2011 16:40:36 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6 into for-davem

8 years agonetdev: bfin_mac: fix memory leak when freeing dma descriptors
Sonic Zhang [Thu, 16 Jun 2011 12:31:58 +0000]
netdev: bfin_mac: fix memory leak when freeing dma descriptors

The size of the desc array is not the size of the desc structure, so
when we try to free up things, we leak some parts.

Reported-by: Regis Dargent <rdargent@edevice.com>
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agovlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support
Antoine Reversat [Thu, 16 Jun 2011 10:47:13 +0000]
vlan: don't call ndo_vlan_rx_register on hardware that doesn't have vlan support

This patch removes the call to ndo_vlan_rx_register if the underlying
device doesn't have hardware support for VLAN.
Signed-off-by: Antoine Reversat <a.reversat@gmail.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agocaif: Bugfix - XOFF removed channel from caif-mux
sjur.brandeland@stericsson.com [Wed, 15 Jun 2011 12:38:25 +0000]
caif: Bugfix - XOFF removed channel from caif-mux

XOFF was mixed up with DOWN indication, causing causing CAIF channel to be
removed from mux and all incoming traffic to be lost after receiving flow-off.
Fix this by replacing FLOW_OFF with DOWN notification.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agotun: teach the tun/tap driver to support netpoll
Neil Horman [Wed, 15 Jun 2011 05:25:01 +0000]
tun: teach the tun/tap driver to support netpoll

Commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093 changed the behavior of slave
devices in regards to netpoll.  Specifically it created a mutually exclusive
relationship between being a slave and a netpoll-capable device.  This creates
problems for KVM because guests relied on needing netconsole active on a slave
device to a bridge.  Ideally libvirtd could just attach netconsole to the bridge
device instead, but thats currently infeasible, because while the bridge device
supports netpoll, it requires that all slave interface also support it, but the
tun/tap driver currently does not.  The most direct solution is to teach tun/tap
to support netpoll, which is implemented by the patch below.

I've not tested this yet, but its pretty straightforward.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Rik van Riel <riel@redhat.com>
CC: Rik van Riel <riel@redhat.com>
CC: Maxim Krasnyansky <maxk@qualcomm.com>
CC: Cong Wang <amwang@redhat.com>
CC: "David S. Miller" <davem@davemloft.net>
Reviewed-by: Rik van Riel <riel@redhat.com>
Tested-by: Rik van Riel <riel@redhat.com>
Reviewed-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agodp83640: drop PHY status frames in the driver.
Richard Cochran [Tue, 14 Jun 2011 23:55:20 +0000]
dp83640: drop PHY status frames in the driver.

The dp83640 PHY provides time stamp and other information via special
PHY status frames. Previously, the driver decoded the frames and then
let the network stack drop them. This works fine when the PTP messages
come over UDP.

However, when receiving PTP messages via L2 packets, this creates a
problem. The status frames use the official PTP destination MAC address,
and so they are delivered to user space along with the "real" frames,
causing confusion for applications.

This commit fixes the issue by simply dropping the PHY status frames
in the driver.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agodp83640: fix phy status frame event parsing
Richard Cochran [Tue, 14 Jun 2011 23:55:19 +0000]
dp83640: fix phy status frame event parsing

If two eternal time stamp events occur at nearly the same time, the
phyter will add an extra word into the status frame. This commit fixes
the parsing code to recognize and skip over the extra word.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agophylib: Allow BCM63XX PHY to be selected only on BCM63XX.
Ralf Baechle [Tue, 14 Jun 2011 22:07:58 +0000]
phylib: Allow BCM63XX PHY to be selected only on BCM63XX.

This PHY is available integrated into BCM63xx series SOCs only.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/net/phy/Kconfig |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
Acked-by: Florian Fainelli <ffainelli@freebox.fr>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agoppp: use PPP_TRANS instead of the magic number 0x20
Changli Gao [Tue, 14 Jun 2011 21:58:13 +0000]
ppp: use PPP_TRANS instead of the magic number 0x20

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agoMAINTAINERS: Update EBTABLES mailing list
Joe Perches [Mon, 13 Jun 2011 16:26:22 +0000]
MAINTAINERS: Update EBTABLES mailing list

It moved to netfilter-devel@vger.kernel.org.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agoIGMP snooping: set mrouters_only flag for IPv6 traffic properly
Fernando Luis Vázquez Cao [Mon, 13 Jun 2011 15:06:58 +0000]
IGMP snooping: set mrouters_only flag for IPv6 traffic properly

Upon reception of a MGM report packet the kernel sets the mrouters_only flag
in a skb that is a clone of the original skb, which means that the bridge
loses track of MGM packets (cb buffers are tied to a specific skb and not
shared) and it ends up forwading join requests to the bridge interface.

This can cause unexpected membership timeouts and intermitent/permanent loss
of connectivity as described in RFC 4541 [2.1.1. IGMP Forwarding Rules]:

    A snooping switch should forward IGMP Membership Reports only to
    those ports where multicast routers are attached.
    [...]
    Sending membership reports to other hosts can result, for IGMPv1
    and IGMPv2, in unintentionally preventing a host from joining a
    specific multicast group.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agoIGMP snooping: set mrouters_only flag for IPv4 traffic properly
Fernando Luis Vázquez Cao [Mon, 13 Jun 2011 15:04:43 +0000]
IGMP snooping: set mrouters_only flag for IPv4 traffic properly

Upon reception of a IGMP/IGMPv2 membership report the kernel sets the
mrouters_only flag in a skb that may be a clone of the original skb, which
means that sometimes the bridge loses track of membership report packets (cb
buffers are tied to a specific skb and not shared) and it ends up forwading
join requests to the bridge interface.

This can cause unexpected membership timeouts and intermitent/permanent loss
of connectivity as described in RFC 4541 [2.1.1. IGMP Forwarding Rules]:

    A snooping switch should forward IGMP Membership Reports only to
    those ports where multicast routers are attached.
    [...]
    Sending membership reports to other hosts can result, for IGMPv1
    and IGMPv2, in unintentionally preventing a host from joining a
    specific multicast group.

Signed-off-by: Fernando Luis Vazquez Cao <fernando@oss.ntt.co.jp>
Tested-by: Hayato Kakuta <kakuta.hayato@oss.ntt.co.jp>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agonet/usb: Add Samsung Kalmia driver for Samsung GT-B3730
Marius B. Kotsbak [Sun, 12 Jun 2011 02:35:02 +0000]
net/usb: Add Samsung Kalmia driver for Samsung GT-B3730

Introducing driver for the network port of Samsung Kalmia based USB LTE modems.
It has also an ACM interface that previous patches associates with the "option"
module. To access those interfaces, the modem must first be switched from modem
mode using a tool like usb_modeswitch.

As the proprietary protocol has been discovered by watching the MS Windows driver
behavior, there might be errors in the protocol handling, but stable and fast
connection has been established for hours with Norwegian operator NetCom that
distributes this modem with their LTE/4G subscription.

More and updated information about how to use this driver is available here:

http://www.draisberghof.de/usb_modeswitch/bb/viewtopic.php?t=465
https://github.com/mkotsbak/Samsung-GT-B3730-linux-driver

Signed-off-by: Marius B. Kotsbak <marius@kotsbak.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
David S. Miller [Fri, 17 Jun 2011 01:38:01 +0000]
Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-2.6

8 years agonetfilter: nf_nat: avoid double seq_adjust for loopback
Julian Anastasov [Thu, 16 Jun 2011 15:29:22 +0000]
netfilter: nf_nat: avoid double seq_adjust for loopback

Avoid double seq adjustment for loopback traffic
because it causes silent repetition of TCP data. One
example is passive FTP with DNAT rule and difference in the
length of IP addresses.

This patch adds check if packet is sent and
received via loopback device. As the same conntrack is
used both for outgoing and incoming direction, we restrict
seq adjustment to happen only in POSTROUTING.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Patrick McHardy <kaber@trash.net>

8 years agonetfilter: fix looped (broad|multi)cast's MAC handling
Nicolas Cavallari [Thu, 16 Jun 2011 15:27:04 +0000]
netfilter: fix looped (broad|multi)cast's MAC handling

By default, when broadcast or multicast packet are sent from a local
application, they are sent to the interface then looped by the kernel
to other local applications, going throught netfilter hooks in the
process.

These looped packet have their MAC header removed from the skb by the
kernel looping code. This confuse various netfilter's netlink queue,
netlink log and the legacy ip_queue, because they try to extract a
hardware address from these packets, but extracts a part of the IP
header instead.

This patch prevent NFQUEUE, NFLOG and ip_QUEUE to include a MAC header
if there is none in the packet.

Signed-off-by: Nicolas Cavallari <cavallar@lri.fr>
Signed-off-by: Patrick McHardy <kaber@trash.net>

8 years agonetfilter: ipt_ecn: fix inversion for IP header ECN match
Patrick McHardy [Thu, 16 Jun 2011 15:24:55 +0000]
netfilter: ipt_ecn: fix inversion for IP header ECN match

Userspace allows to specify inversion for IP header ECN matches, the
kernel silently accepts it, but doesn't invert the match result.

Signed-off-by: Patrick McHardy <kaber@trash.net>

8 years agonetfilter: ipt_ecn: fix protocol check in ecn_mt_check()
Patrick McHardy [Thu, 16 Jun 2011 15:24:17 +0000]
netfilter: ipt_ecn: fix protocol check in ecn_mt_check()

Check for protocol inversion in ecn_mt_check() and remove the
unnecessary runtime check for IPPROTO_TCP in ecn_mt().

Signed-off-by: Patrick McHardy <kaber@trash.net>

8 years agonetfilter: ip_tables: fix compile with debug
Sebastian Andrzej Siewior [Thu, 16 Jun 2011 15:16:37 +0000]
netfilter: ip_tables: fix compile with debug

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Patrick McHardy <kaber@trash.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/ipvs-2.6
Patrick McHardy [Thu, 16 Jun 2011 15:09:54 +0000]
Merge branch 'master' of git://git./linux/kernel/git/horms/ipvs-2.6

8 years agomwl8k: Tell firmware to generate CCMP header
Nishant Sarmukadam [Mon, 13 Jun 2011 10:56:15 +0000]
mwl8k: Tell firmware to generate CCMP header

Post commit e4eefec73ea0a740bfe8736e3ac30dfe92fe392b, the stack is
not generating the CCMP header for us anymore. This broke the CCMP
functionality since firmware was not doing this either. Set a flag
to tell the firmware to generate the CCMP header

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomwifiex: Fixing NULL pointer dereference
Yogesh Ashok Powar [Mon, 13 Jun 2011 04:19:27 +0000]
mwifiex: Fixing NULL pointer dereference

Following OOPS was seen when booting with card inserted

 BUG: unable to handle kernel NULL pointer dereference at 0000004c
 IP: [<f8b7718c>] cfg80211_get_drvinfo+0x21/0x115 [cfg80211]
 *pde = 00000000
 Oops: 0000 [#1] SMP
 Modules linked in: iwl3945 iwl_legacy mwifiex_sdio mac80211 11 sdhci_pci sdhci pl2303

'ethtool' on the mwifiex device returned this OOPS as
wiphy_dev() returned NULL.

Adding missing set_wiphy_dev() call to fix the problem.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agonet/hplance: hplance_init() should be __devinit
Geert Uytterhoeven [Mon, 13 Jun 2011 08:17:36 +0000]
net/hplance: hplance_init() should be __devinit

WARNING: vmlinux.o(.devinit.text+0x253e): Section mismatch in reference from the function hplance_init_one() to the function .init.text:hplance_init()

The forward declaration had the correct attribute, but the actual function
definition hadn't.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years ago3c503: fix broken IRQ autoprobing
Ondrej Zary [Sun, 12 Jun 2011 09:40:49 +0000]
3c503: fix broken IRQ autoprobing

Fix broken IRQ autoprobing in 3c503 driver:
 - improper IRQ freeing (does not free IRQs causes WARN)
 - missing break when an working IRQ is found

The driver works with this patch.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Reviewed-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agoieee802154: Don't leak memory in ieee802154_nl_fill_phy
Jesper Juhl [Sun, 12 Jun 2011 04:28:16 +0000]
ieee802154: Don't leak memory in ieee802154_nl_fill_phy

In net/ieee802154/nl-phy.c::ieee802154_nl_fill_phy() I see two small
issues.
1) If the allocation of 'buf' fails we may just as well return -EMSGSIZE
   directly rather than jumping to 'out:' and do a pointless kfree(0).
2) We do not free 'buf' unless we jump to one of the error labels and this
   leaks memory.
This patch should address both.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: David S. Miller <davem@conan.davemloft.net>

8 years agoIPVS netns exit causes crash in conntrack
Hans Schillstrom [Mon, 13 Jun 2011 07:06:57 +0000]
IPVS netns exit causes crash in conntrack

Quote from Patric Mc Hardy
"This looks like nfnetlink.c excited and destroyed the nfnl socket, but
ip_vs was still holding a reference to a conntrack. When the conntrack
got destroyed it created a ctnetlink event, causing an oops in
netlink_has_listeners when trying to use the destroyed nfnetlink
socket."

If nf_conntrack_netlink is loaded before ip_vs this is not a problem.

This patch simply avoids calling ip_vs_conn_drop_conntrack()
when netns is dying as suggested by Julian.

Signed-off-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: Simon Horman <horms@verge.net.au>

8 years agoISDN, hfcsusb: Don't leak in hfcsusb_ph_info()
Jesper Juhl [Sat, 11 Jun 2011 06:36:42 +0000]
ISDN, hfcsusb: Don't leak in hfcsusb_ph_info()

We leak the memory allocated to 'phi' when the variable goes out of scope
in hfcsusb_ph_info().

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetpoll: call dev_put() on error in netpoll_setup()
Dan Carpenter [Sun, 12 Jun 2011 01:55:22 +0000]
netpoll: call dev_put() on error in netpoll_setup()

There is a dev_put(ndev) missing on an error path.  This was
introduced in 0c1ad04aecb "netpoll: prevent netpoll setup on slave
devices".

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ep93xx_eth: fix DMA API violations
Mika Westerberg [Sat, 11 Jun 2011 08:39:58 +0000]
net: ep93xx_eth: fix DMA API violations

Russell King said:
>
> So, to summarize what its doing:
>
> 1. It allocates buffers for rx and tx.
> 2. It maps them with dma_map_single().
>       This transfers ownership of the buffer to the DMA device.
> 3. In ep93xx_xmit,
> 3a. It copies the data into the buffer with skb_copy_and_csum_dev()
>       This violates the DMA buffer ownership rules - the CPU should
>       not be writing to this buffer while it is (in principle) owned
>       by the DMA device.
> 3b. It then calls dma_sync_single_for_cpu() for the buffer.
>       This transfers ownership of the buffer to the CPU, which surely
>       is the wrong direction.
> 4. In ep93xx_rx,
> 4a. It calls dma_sync_single_for_cpu() for the buffer.
>       This at least transfers the DMA buffer ownership to the CPU
>       before the CPU reads the buffer
> 4b. It then uses skb_copy_to_linear_data() to copy the data out.
>       At no point does it transfer ownership back to the DMA device.
> 5. When the driver is removed, it dma_unmap_single()'s the buffer.
>       This transfers ownership of the buffer to the CPU.
> 6. It frees the buffer.
>
> While it may work on ep93xx, it's not respecting the DMA API rules,
> and with DMA debugging enabled it will probably encounter quite a few
> warnings.

This patch fixes these violations.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()
Mika Westerberg [Sat, 11 Jun 2011 08:39:57 +0000]
net: ep93xx_eth: drop GFP_DMA from call to dma_alloc_coherent()

Commit a197b59ae6e8 (mm: fail GFP_DMA allocations when ZONE_DMA is not
configured) made page allocator to return NULL if GFP_DMA is set but
CONFIG_ZONE_DMA is disabled.

This causes ep93xx_eth to fail:

 WARNING: at mm/page_alloc.c:2251 __alloc_pages_nodemask+0x11c/0x638()
 Modules linked in:
 [<c0035498>] (unwind_backtrace+0x0/0xf4) from [<c0043da4>] (warn_slowpath_common+0x48/0x60)
 [<c0043da4>] (warn_slowpath_common+0x48/0x60) from [<c0043dd8>] (warn_slowpath_null+0x1c/0x24)
 [<c0043dd8>] (warn_slowpath_null+0x1c/0x24) from [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638)
 [<c0083b6c>] (__alloc_pages_nodemask+0x11c/0x638) from [<c00366fc>] (__dma_alloc+0x8c/0x3ec)
 [<c00366fc>] (__dma_alloc+0x8c/0x3ec) from [<c0036adc>] (dma_alloc_coherent+0x54/0x60)
 [<c0036adc>] (dma_alloc_coherent+0x54/0x60) from [<c0227808>] (ep93xx_open+0x20/0x864)
 [<c0227808>] (ep93xx_open+0x20/0x864) from [<c0283144>] (__dev_open+0xb8/0x108)
 [<c0283144>] (__dev_open+0xb8/0x108) from [<c0280528>] (__dev_change_flags+0x70/0x128)
 [<c0280528>] (__dev_change_flags+0x70/0x128) from [<c0283054>] (dev_change_flags+0x10/0x48)
 [<c0283054>] (dev_change_flags+0x10/0x48) from [<c001a720>] (ip_auto_config+0x190/0xf68)
 [<c001a720>] (ip_auto_config+0x190/0xf68) from [<c00233b0>] (do_one_initcall+0x34/0x18c)
 [<c00233b0>] (do_one_initcall+0x34/0x18c) from [<c0008400>] (kernel_init+0x94/0x134)
 [<c0008400>] (kernel_init+0x94/0x134) from [<c0030858>] (kernel_thread_exit+0x0/0x8)

Since there is no restrictions for DMA on ep93xx, we can fix this by just
removing the GFP_DMA flag from the call.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ep93xx_eth: allocate buffers using kmalloc()
Mika Westerberg [Sat, 11 Jun 2011 08:39:56 +0000]
net: ep93xx_eth: allocate buffers using kmalloc()

We can use simply kmalloc() to allocate the buffers. This also simplifies the
code and allows us to perform DMA sync operations more easily.

Memory is allocated with only GFP_KERNEL since there are no DMA allocation
restrictions on this platform.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ep93xx_eth: pass struct device to DMA API functions
Mika Westerberg [Sat, 11 Jun 2011 08:39:55 +0000]
net: ep93xx_eth: pass struct device to DMA API functions

We shouldn't use NULL for any DMA API functions, unless we are dealing with
ISA or EISA device. So pass correct struct dev pointer to these functions.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoep93xx: set DMA masks for the ep93xx_eth
Mika Westerberg [Sat, 11 Jun 2011 08:39:54 +0000]
ep93xx: set DMA masks for the ep93xx_eth

Since the driver uses the DMA API, we should pass it valid DMA masks.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Tested-by: Petr Stetiar <ynezz@true.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agovlan: Fix the ingress VLAN_FLAG_REORDER_HDR check
Jiri Pirko [Fri, 10 Jun 2011 06:56:58 +0000]
vlan: Fix the ingress VLAN_FLAG_REORDER_HDR check

Testing of VLAN_FLAG_REORDER_HDR does not belong in vlan_untag
but rather in vlan_do_receive.  Otherwise the vlan header
will not be properly put on the packet in the case of
vlan header accelleration.

As we remove the check from vlan_check_reorder_header
rename it vlan_reorder_header to keep the naming clean.

Fix up the skb->pkt_type early so we don't look at the packet
after adding the vlan tag, which guarantees we don't goof
and look at the wrong field.

Use a simple if statement instead of a complicated switch
statement to decided that we need to increment rx_stats
for a multicast packet.

Hopefully at somepoint we will just declare the case where
VLAN_FLAG_REORDER_HDR is cleared as unsupported and remove
the code.  Until then this keeps it working correctly.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Acked-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodl2k: EEPROM CRC calculation wrong endianess on bigendian machine
Daniel Hellstrom [Fri, 10 Jun 2011 04:55:16 +0000]
dl2k: EEPROM CRC calculation wrong endianess on bigendian machine

Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoNET: am79c961: fix assembler warnings
Russell King - ARM Linux [Fri, 10 Jun 2011 00:52:35 +0000]
NET: am79c961: fix assembler warnings

Fix:
/tmp/ccvoZ6h8.s: Assembler messages:
/tmp/ccvoZ6h8.s:284: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:881: Warning: register range not in ascending order
/tmp/ccvoZ6h8.s:1087: Warning: register range not in ascending order

by ensuring that we have temporary variables placed into specific
registers.  Reorder the code a bit to allow the resulting assembly
to be slightly more optimal.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoNET: am79c961: ensure multicast filter is correctly set at open
Russell King - ARM Linux [Fri, 10 Jun 2011 00:52:14 +0000]
NET: am79c961: ensure multicast filter is correctly set at open

We were clearing out the multicast filter whenever the interface was
upped, and not setting the mode bits correctly.  This can cause
problems if there are any multicast addresses already set at this
point, or if ALLMULTI was set.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoNET: am79c961: ensure asm() statements are marked volatile
Russell King - ARM Linux [Fri, 10 Jun 2011 00:51:54 +0000]
NET: am79c961: ensure asm() statements are marked volatile

Without this the compiler can (and does) optimize register reads away
from within loops, and other such optimizations.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/padovan/bluetoot...
John W. Linville [Fri, 10 Jun 2011 19:05:34 +0000]
Merge branch 'master' of /linux/kernel/git/padovan/bluetooth-2.6

8 years agoBluetooth: Do not send SET_EVENT_MASK for 1.1 and earlier devices
Ville Tervo [Fri, 27 May 2011 08:16:21 +0000]
Bluetooth: Do not send SET_EVENT_MASK for 1.1 and earlier devices

Some old hci controllers do not accept any mask so leave the
default mask on for these devices.

< HCI Command: Set Event Mask (0x03|0x0001) plen 8
    Mask: 0xfffffbff00000000
> HCI Event: Command Complete (0x0e) plen 4
    Set Event Mask (0x03|0x0001) ncmd 1
    status 0x12
    Error: Invalid HCI Command Parameters

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Tested-by: Corey Boyle <corey@kansanian.com>
Tested-by: Ed Tomlinson <edt@aei.ca>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

8 years agoBluetooth: Do not ignore errors returned from strict_strtol()
David Miller [Thu, 19 May 2011 21:37:45 +0000]
Bluetooth: Do not ignore errors returned from strict_strtol()

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

8 years agoBluetooth: fix shutdown on SCO sockets
Luiz Augusto von Dentz [Thu, 12 May 2011 08:13:15 +0000]
Bluetooth: fix shutdown on SCO sockets

shutdown should wait for SCO link to be properly disconnected before
detroying the socket, otherwise an application using the socket may
assume link is properly disconnected before it really happens which
can be a problem when e.g synchronizing profile switch.

Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

8 years agoethtool.h: fix typos
Yegor Yefremov [Thu, 9 Jun 2011 22:05:48 +0000]
ethtool.h: fix typos

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoep93xx_eth: Update MAINTAINERS
H Hartley Sweeten [Thu, 9 Jun 2011 22:00:21 +0000]
ep93xx_eth: Update MAINTAINERS

Lennert stated that he has been short on time lately. Since I'm maintaining
the ep93xx core stuff, I'm willing to also take over maintaining the Ethernet
driver.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv4: Fix packet size calculation for raw IPsec packets in __ip_append_data
Steffen Klassert [Sun, 5 Jun 2011 20:48:47 +0000]
ipv4: Fix packet size calculation for raw IPsec packets in __ip_append_data

We assume that transhdrlen is positive on the first fragment
which is wrong for raw packets. So we don't add exthdrlen to the
packet size for raw packets. This leads to a reallocation on IPsec
because we have not enough headroom on the skb to place the IPsec
headers. This patch fixes this by adding exthdrlen to the packet
size whenever the send queue of the socket is empty. This issue was
introduced with git commit 1470ddf7 (inet: Remove explicit write
references to sk/inet in ip_append_data)

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoBluetooth: l2cap and rfcomm: fix 1 byte infoleak to userspace.
Filip Palian [Thu, 12 May 2011 17:32:46 +0000]
Bluetooth: l2cap and rfcomm: fix 1 byte infoleak to userspace.

Structures "l2cap_conninfo" and "rfcomm_conninfo" have one padding
byte each. This byte in "cinfo" is copied to userspace uninitialized.

Signed-off-by: Filip Palian <filip.palian@pjwstk.edu.pl>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Thu, 9 Jun 2011 18:23:30 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6 into for-davem

8 years agonetpoll: prevent netpoll setup on slave devices
WANG Cong [Thu, 9 Jun 2011 07:28:13 +0000]
netpoll: prevent netpoll setup on slave devices

In commit 8d8fc29d02a33e4bd5f4fa47823c1fd386346093
(netpoll: disable netpoll when enslave a device), we automatically
disable netpoll when the underlying device is being enslaved,
we also need to prevent people from setuping netpoll on
devices that are already enslaved.

Signed-off-by: WANG Cong <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: pmtu_expires fixes
Eric Dumazet [Wed, 8 Jun 2011 06:07:07 +0000]
net: pmtu_expires fixes

commit 2c8cec5c10bc (ipv4: Cache learned PMTU information in inetpeer)
added some racy peer->pmtu_expires accesses.

As its value can be changed by another cpu/thread, we should be more
careful, reading its value once.

Add peer_pmtu_expired() and peer_pmtu_cleaned() helpers

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agogianfar:localized filer table
Wu Jiajun-B06378 [Tue, 7 Jun 2011 21:46:51 +0000]
gianfar:localized filer table

Each eTSEC device should own localized filer table.

Signed-off-by: Jiajun Wu <b06378@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoiwlegacy: fix channel switch locking
Stanislaw Gruszka [Wed, 8 Jun 2011 13:26:31 +0000]
iwlegacy: fix channel switch locking

We use priv->mutex to avoid race conditions between chswitch_done()
and mac_channel_switch(), when marking channel switch in
progress. But chswitch_done() can be called in atomic context
from rx_csa() or with mutex already taken from commit_rxon().

To fix remove mutex from chswitch_done() and use atomic bitops
for marking channel switch pending.

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomac80211: fix IBSS teardown race
Johannes Berg [Wed, 8 Jun 2011 11:27:29 +0000]
mac80211: fix IBSS teardown race

Ignacy reports that sometimes after leaving an IBSS
joining a new one didn't work because there still
were stations on the list. He fixed it by flushing
stations when attempting to join a new IBSS, but
this shouldn't be happening in the first case. When
I looked into it I saw a race condition in teardown
that could cause stations to be added after flush,
and thus cause this situation. Ignacy confirms that
after applying my patch he hasn't seen this happen
again.

Reported-by: Ignacy Gawedzki <i@lri.fr>
Debugged-by: Ignacy Gawedzki <i@lri.fr>
Tested-by: Ignacy Gawedzki <i@lri.fr>
Cc: stable@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlagn: send tx power command if defer cause by RXON not match
Wey-Yi Guy [Fri, 27 May 2011 15:40:24 +0000]
iwlagn: send tx power command if defer cause by RXON not match

During channge channel, tx power will not send to uCode, the tx power command
should send after scan complete. but should also can send after RXON command.

Stable fix identified by Stanislaw Gruszka <sgruszka@redhat.com>.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Cc: stable@kernel.org [2.6.38+]
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoxfrm: Fix off by one in the replay advance functions
Steffen Klassert [Sun, 5 Jun 2011 20:46:03 +0000]
xfrm: Fix off by one in the replay advance functions

We may write 4 byte too much when we reinitialize the anti replay
window in the replay advance functions. This patch fixes this by
adjusting the last index of the initialization loop.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoigb: fix i350 SR-IOV failture
Williams, Mitch A [Tue, 7 Jun 2011 21:22:57 +0000]
igb: fix i350 SR-IOV failture

When SR-IOV is enabled, i350 devices fail to pass traffic. This is due to
the driver attempting to enable RSS on the PF device, which is not
supported by the i350.

When max_vfs is specified on an i350 adapter, set the number of RSS queues
to 1.

This issue affects 2.6.39 as well.

CC: stable@kernel.org
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonl80211: fix overflow in ssid_len
Luciano Coelho [Tue, 7 Jun 2011 17:42:26 +0000]
nl80211: fix overflow in ssid_len

When one of the SSID's length passed in a scan or sched_scan request
is larger than 255, there will be an overflow in the u8 that is used
to store the length before checking.  This causes the check to fail
and we overrun the buffer when copying the SSID.

Fix this by checking the nl80211 attribute length before copying it to
the struct.

This is a follow up for the previous commit
208c72f4fe44fe09577e7975ba0e7fa0278f3d03, which didn't fix the problem
entirely.

Reported-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agortlwifi: Avoid modifying skbs that are resubmitted
Mike McCormack [Mon, 6 Jun 2011 23:58:31 +0000]
rtlwifi: Avoid modifying skbs that are resubmitted

In the case we fail to allocate a new skb, the old skb should
be resubmitted unmodified.

Fixes bug introduced in a9e12869758430424804.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agortlwifi: Fix logic in rx_interrupt
Mike McCormack [Mon, 30 May 2011 23:50:24 +0000]
rtlwifi: Fix logic in rx_interrupt

Should pass along packet if there's no CRC and no hardware error.

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoRevert "mac80211: stop queues before rate control updation"
John W. Linville [Tue, 7 Jun 2011 18:03:08 +0000]
Revert "mac80211: stop queues before rate control updation"

This reverts commit 1d38c16ce4156f63b45abbd09dd28ca2ef5172b4.

The mac80211 maintainer raised complaints about abuse of the CSA stop
reason, and about whether this patch actually serves its intended
purpose at all.

Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agonet: cpu offline cause napi stall
Heiko Carstens [Mon, 6 Jun 2011 20:50:03 +0000]
net: cpu offline cause napi stall

Frank Blaschka reported :
<quote>
  During heavy network load we turn off/on cpus.
  Sometimes this causes a stall on the network device.
  Digging into the dump I found out following:

  napi is scheduled but does not run. From the I/O buffers
  and the napi state I see napi/rx_softirq processing has stopped
  because the budget was reached. napi stays in the
  softnet_data poll_list and the rx_softirq was raised again.

  I assume at this time the cpu offline comes in,
  the rx softirq is raised/moved to another cpu but napi stays in the
  poll_list of the softnet_data of the now offline cpu.

  Reviewing dev_cpu_callback (net/core/dev.c) I did not find the
  poll_list is transfered to the new cpu.
</quote>

This patch is a straightforward implementation of Frank suggestion :

Transfert poll_list and trigger NET_RX_SOFTIRQ on new cpu.

Reported-by: Frank Blaschka <blaschka@linux.vnet.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobridge: provide a cow_metrics method for fake_ops
Alexander Holler [Tue, 7 Jun 2011 07:51:35 +0000]
bridge: provide a cow_metrics method for fake_ops

Like in commit 0972ddb237 (provide cow_metrics() methods to blackhole
dst_ops), we must provide a cow_metrics for bridges fake_dst_ops as
well.

This fixes a regression coming from commits 62fa8a846d7d (net: Implement
read-only protection and COW'ing of metrics.) and 33eb9873a28 (bridge:
initialize fake_rtable metrics)

ip link set mybridge mtu 1234
-->
[  136.546243] Pid: 8415, comm: ip Tainted: P
2.6.39.1-00006-g40545b7 #103 ASUSTeK Computer Inc.         V1Sn
        /V1Sn
[  136.546256] EIP: 0060:[<00000000>] EFLAGS: 00010202 CPU: 0
[  136.546268] EIP is at 0x0
[  136.546273] EAX: f14a389c EBX: 000005d4 ECX: f80d32c0 EDX: f80d1da1
[  136.546279] ESI: f14a3000 EDI: f255bf10 EBP: f15c3b54 ESP: f15c3b48
[  136.546285]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  136.546293] Process ip (pid: 8415, ti=f15c2000 task=f4741f80
task.ti=f15c2000)
[  136.546297] Stack:
[  136.546301]  f80c658f f14a3000 ffffffed f15c3b64 c12cb9c8 f80d1b80
ffffffa1 f15c3bbc
[  136.546315]  c12da347 c12d9c7d 00000000 f7670b00 00000000 f80d1b80
ffffffa6 f15c3be4
[  136.546329]  00000004 f14a3000 f255bf20 00000008 f15c3bbc c11d6cae
00000000 00000000
[  136.546343] Call Trace:
[  136.546359]  [<f80c658f>] ? br_change_mtu+0x5f/0x80 [bridge]
[  136.546372]  [<c12cb9c8>] dev_set_mtu+0x38/0x80
[  136.546381]  [<c12da347>] do_setlink+0x1a7/0x860
[  136.546390]  [<c12d9c7d>] ? rtnl_fill_ifinfo+0x9bd/0xc70
[  136.546400]  [<c11d6cae>] ? nla_parse+0x6e/0xb0
[  136.546409]  [<c12db931>] rtnl_newlink+0x361/0x510
[  136.546420]  [<c1023240>] ? vmalloc_sync_all+0x100/0x100
[  136.546429]  [<c1362762>] ? error_code+0x5a/0x60
[  136.546438]  [<c12db5d0>] ? rtnl_configure_link+0x80/0x80
[  136.546446]  [<c12db27a>] rtnetlink_rcv_msg+0xfa/0x210
[  136.546454]  [<c12db180>] ? __rtnl_unlock+0x20/0x20
[  136.546463]  [<c12ee0fe>] netlink_rcv_skb+0x8e/0xb0
[  136.546471]  [<c12daf1c>] rtnetlink_rcv+0x1c/0x30
[  136.546479]  [<c12edafa>] netlink_unicast+0x23a/0x280
[  136.546487]  [<c12ede6b>] netlink_sendmsg+0x26b/0x2f0
[  136.546497]  [<c12bb828>] sock_sendmsg+0xc8/0x100
[  136.546508]  [<c10adf61>] ? __alloc_pages_nodemask+0xe1/0x750
[  136.546517]  [<c11d0602>] ? _copy_from_user+0x42/0x60
[  136.546525]  [<c12c5e4c>] ? verify_iovec+0x4c/0xc0
[  136.546534]  [<c12bd805>] sys_sendmsg+0x1c5/0x200
[  136.546542]  [<c10c2150>] ? __do_fault+0x310/0x410
[  136.546549]  [<c10c2c46>] ? do_wp_page+0x1d6/0x6b0
[  136.546557]  [<c10c47d1>] ? handle_pte_fault+0xe1/0x720
[  136.546565]  [<c12bd1af>] ? sys_getsockname+0x7f/0x90
[  136.546574]  [<c10c4ec1>] ? handle_mm_fault+0xb1/0x180
[  136.546582]  [<c1023240>] ? vmalloc_sync_all+0x100/0x100
[  136.546589]  [<c10233b3>] ? do_page_fault+0x173/0x3d0
[  136.546596]  [<c12bd87b>] ? sys_recvmsg+0x3b/0x60
[  136.546605]  [<c12bdd83>] sys_socketcall+0x293/0x2d0
[  136.546614]  [<c13629d0>] sysenter_do_call+0x12/0x26
[  136.546619] Code:  Bad EIP value.
[  136.546627] EIP: [<00000000>] 0x0 SS:ESP 0068:f15c3b48
[  136.546645] CR2: 0000000000000000
[  136.546652] ---[ end trace 6909b560e78934fa ]---

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoaf_packet: prevent information leak
Eric Dumazet [Tue, 7 Jun 2011 05:42:06 +0000]
af_packet: prevent information leak

In 2.6.27, commit 393e52e33c6c2 (packet: deliver VLAN TCI to userspace)
added a small information leak.

Add padding field and make sure its zeroed before copy to user.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoirda: iriap: Use seperate lockdep class for irias_objects->hb_spinlock
David S. Miller [Tue, 7 Jun 2011 00:00:35 +0000]
irda: iriap: Use seperate lockdep class for irias_objects->hb_spinlock

The SEQ output functions grab the obj->attrib->hb_spinlock lock of
sub-objects found in the hash traversal.  These locks are in a different
realm than the one used for the irias_objects hash table itself.

So put the latter into it's own lockdep class.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Rework netdev_drivername() to avoid warning.
David S. Miller [Mon, 6 Jun 2011 23:41:33 +0000]
net: Rework netdev_drivername() to avoid warning.

This interface uses a temporary buffer, but for no real reason.
And now can generate warnings like:

net/sched/sch_generic.c: In function dev_watchdog
net/sched/sch_generic.c:254:10: warning: unused variable drivername

Just return driver->name directly or "".

Reported-by: Connor Hansen <cmdkhh@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/ipv6: check for mistakenly passed in non-AF_INET6 sockaddrs
Marcus Meissner [Mon, 6 Jun 2011 06:00:07 +0000]
net/ipv6: check for mistakenly passed in non-AF_INET6 sockaddrs

Same check as for IPv4, also do for IPv6.

(If you passed in a IPv4 sockaddr_in here, the sizeof check
 in the line before would have triggered already though.)

Signed-off-by: Marcus Meissner <meissner@suse.de>
Cc: Reinhard Max <max@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Mon, 6 Jun 2011 20:25:36 +0000]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless-2.6

8 years agoiwl4965: set tx power after rxon_assoc
Stanislaw Gruszka [Mon, 6 Jun 2011 13:11:30 +0000]
iwl4965: set tx power after rxon_assoc

Setting tx power can be deferred during scan or changing channel.
If after that correct tx power settings will not be sent to device,
we can observe transmission problems and timeouts. Force to send
tx power settings also after partial rxon change, to assure device
always be configured with up-to-date settings.

Resolves:
https://bugzilla.kernel.org/show_bug.cgi?id=36492

Cc: stable@kernel.org # 2.6.39+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agort2x00: fix rmmod crash
Stanislaw Gruszka [Sat, 4 Jun 2011 14:48:54 +0000]
rt2x00: fix rmmod crash

Avoid queue and run autowakeup_work when device is not present anymore.
That prevent rmmod and device remove crash introduced by:

commit 1c0bcf89d85cc97a0d9ce4cd909351a81fa4fdde
Author: Ivo van Doorn <ivdoorn@gmail.com>
Date:   Sat Apr 30 17:18:18 2011 +0200

    rt2x00: Add autowake support for USB hardware

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlagn: use cts-to-self protection on 5000 adapters series
Stanislaw Gruszka [Thu, 26 May 2011 15:14:22 +0000]
iwlagn: use cts-to-self protection on 5000 adapters series

This patch fixes 802.11n stability and performance regression we have
since 2.6.35. It boost performance on my 5GHz N-only network from about
5MB/s to 8MB/s. Similar percentage boost can be observed on 2.4 GHz.

These are test results of 5x downloading of approximately 700MB iso
image:

vanilla: 5.27 5.22 4.94 4.47 5.31 ; avr 5.0420 std 0.35110
patched: 8.07 7.95 8.06 7.99 7.96 ; avr 8.0060 std 0.055946

This was achieved with NetworkManager configured to do not perform
periodical scans, by configuring constant BSSID. With periodical scans,
after some time, performance downgrade to unpatched driver level, like
in example below:

patched: 7.40 7.61 4.28 4.37 4.80 avr 5.6920 std 1.6683

However patch still make better here, since similar test on unpatched
driver make link disconnects with below messages after some time:

wlan1: authenticate with 00:23:69:35:d1:3f (try 1)
wlan1: authenticate with 00:23:69:35:d1:3f (try 2)
wlan1: authenticate with 00:23:69:35:d1:3f (try 3)
wlan1: authentication with 00:23:69:35:d1:3f timed out

On 2.6.35 kernel patch helps against connection hangs with messages:

iwlagn 0000:20:00.0: queue 10 stuck 3 time. Fw reload.
iwlagn 0000:20:00.0: On demand firmware reload
iwlagn 0000:20:00.0: Stopping AGG while state not ON or starting

Cc: stable@kernel.org # 2.6.35+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoRevert "mac80211: Skip tailroom reservation for full HW-crypto devices"
John W. Linville [Mon, 6 Jun 2011 18:35:27 +0000]
Revert "mac80211: Skip tailroom reservation for full HW-crypto devices"

This reverts commit aac6af5534fade2b18682a0b9efad1a6c04c34c6.

Conflicts:

net/mac80211/key.c

That commit has a race that causes a warning, as documented in the thread
here:

http://marc.info/?l=linux-wireless&m=130717684914101&w=2

Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Mon, 6 Jun 2011 17:58:21 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6 into for-davem

8 years agoMerge branch 'pablo/nf-2.6-updates' of git://1984.lsi.us.es/net-2.6
David S. Miller [Mon, 6 Jun 2011 00:14:04 +0000]
Merge branch 'pablo/nf-2.6-updates' of git://1984.lsi.us.es/net-2.6

8 years agonet: fix smc91x.c device tree support
Grant Likely [Fri, 3 Jun 2011 21:31:27 +0000]
net: fix smc91x.c device tree support

Fix missing semicolon at end of smc91x.c match tabledevice driver.
Also remove unnecessary #ifdef around of_match_table pointer.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetfilter: use unsigned variables for packet lengths in ip[6]_queue.
Dave Jones [Sat, 28 May 2011 00:36:51 +0000]
netfilter: use unsigned variables for packet lengths in ip[6]_queue.

Netlink message lengths can't be negative, so use unsigned variables.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agonetfilter: nf_conntrack: fix ct refcount leak in l4proto->error()
Pablo Neira Ayuso [Thu, 2 Jun 2011 13:08:45 +0000]
netfilter: nf_conntrack: fix ct refcount leak in l4proto->error()

This patch fixes a refcount leak of ct objects that may occur if
l4proto->error() assigns one conntrack object to one skbuff. In
that case, we have to skip further processing in nf_conntrack_in().

With this patch, we can also fix wrong return values (-NF_ACCEPT)
for special cases in ICMP[v6] that should not bump the invalid/error
statistic counters.

Reported-by: Zoltan Menyhart <Zoltan.Menyhart@bull.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agonetfilter: nf_nat: fix crash in nf_nat_csum
Julian Anastasov [Sun, 29 May 2011 20:42:29 +0000]
netfilter: nf_nat: fix crash in nf_nat_csum

Fix crash in nf_nat_csum when mangling packets
in OUTPUT hook where skb->dev is not defined, it is set
later before POSTROUTING. Problem happens for CHECKSUM_NONE.
We can check device from rt but using CHECKSUM_PARTIAL
should be safe (skb_checksum_help).

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agonetfilter: ipset: Use the stored first cidr value instead of '1'
Jozsef Kadlecsik [Wed, 1 Jun 2011 21:35:49 +0000]
netfilter: ipset: Use the stored first cidr value instead of '1'

The stored cidr values are tried one after anoter. The boolean
condition evaluated to '1' instead of the first stored cidr or
the default host cidr.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agonetfilter: ipset: Fix return code for destroy when sets are in use
Jozsef Kadlecsik [Wed, 1 Jun 2011 21:35:48 +0000]
netfilter: ipset: Fix return code for destroy when sets are in use

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agoipvs: restore support for iptables SNAT
Julian Anastasov [Thu, 2 Jun 2011 00:09:54 +0000]
ipvs: restore support for iptables SNAT

Fix the IPVS priority in LOCAL_IN hook,
so that SNAT target in POSTROUTING is supported for IPVS
traffic as in 2.6.36 where it worked depending on
module load order.

Before 2.6.37 we used priority 100 in LOCAL_IN to
process remote requests. We used the same priority as
iptables SNAT and if IPVS handlers are installed before
SNAT handlers we supported SNAT in POSTROUTING for the IPVS
traffic. If SNAT is installed before IPVS, the netfilter
handlers are before IPVS and netfilter checks the NAT
table twice for the IPVS requests: once in LOCAL_IN where
IPS_SRC_NAT_DONE is set and second time in POSTROUTING
where the SNAT rules are ignored because IPS_SRC_NAT_DONE
was already set in LOCAL_IN.

But in 2.6.37 we changed the IPVS priority for
LOCAL_IN with the goal to be unique (101) forgetting the
fact that for IPVS traffic we should not walk both
LOCAL_IN and POSTROUTING nat tables.

So, change the priority for processing remote
IPVS requests from 101 to 99, i.e. before NAT_SRC (100)
because we prefer to support SNAT in POSTROUTING
instead of LOCAL_IN. It also moves the priority for
IPVS replies from 99 to 98. Use constants instead of
magic numbers at these places.

Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agonetfilter: add more values to enum ip_conntrack_info
Eric Dumazet [Thu, 19 May 2011 13:44:27 +0000]
netfilter: add more values to enum ip_conntrack_info

Following error is raised (and other similar ones) :

net/ipv4/netfilter/nf_nat_standalone.c: In function ‘nf_nat_fn’:
net/ipv4/netfilter/nf_nat_standalone.c:119:2: warning: case value ‘4’
not in enumerated type ‘enum ip_conntrack_info’

gcc barfs on adding two enum values and getting a not enumerated
result :

case IP_CT_RELATED+IP_CT_IS_REPLY:

Add missing enum values

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: David Miller <davem@davemloft.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

8 years agobonding: reset queue mapping prior to transmission to physical device (v5)
Neil Horman [Fri, 3 Jun 2011 10:35:52 +0000]
bonding: reset queue mapping prior to transmission to physical device (v5)

The bonding driver is multiqueue enabled, in which each queue represents a slave
to enable optional steering of output frames to given slaves against the default
output policy.  However, it needs to reset the skb->queue_mapping prior to
queuing to the physical device or the physical slave (if it is multiqueue) could
wind up transmitting on an unintended tx queue

Change Notes:
v2) Based on first pass review, updated the patch to restore the origional queue
mapping that was found in bond_select_queue, rather than simply resetting to
zero.  This preserves the value of queue_mapping when it was set on receive in
the forwarding case which is desireable.

v3) Fixed spelling an casting error in skb->cb

v4) fixed to store raw queue_mapping to avoid double decrement

v5) Eric D requested that ->cb access be wrapped in a macro.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Jay Vosburgh <fubar@us.ibm.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: Avoid double free of skb in tx path
Sucheta Chakraborty [Fri, 3 Jun 2011 05:52:18 +0000]
qlcnic: Avoid double free of skb in tx path

buffer->skb should be marked NULL to avoid double free of the skb.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: Fix bug in FW queue dump
Anirban Chakraborty [Thu, 2 Jun 2011 12:42:21 +0000]
qlcnic: Fix bug in FW queue dump

Due to a change in FW template, a bug was introduced in dump queue entries. This is
fixed by reinitializing queue address before looping for each que dump operation.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agofix return values of l2tp_dfs_seq_open()
Al Viro [Sun, 5 Jun 2011 00:54:03 +0000]
fix return values of l2tp_dfs_seq_open()

More fallout from struct net lifetime rules review: PTR_ERR() is *already*
negative and failing ->open() should return negatives on failure.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoget_net_ns_by_fd() oopses if proc_ns_fget() returns an error
Al Viro [Sun, 5 Jun 2011 00:37:35 +0000]
get_net_ns_by_fd() oopses if proc_ns_fget() returns an error

BTW, looking through the code related to struct net lifetime rules has
caught something else:

struct net *get_net_ns_by_fd(int fd)
{
        ...
        file = proc_ns_fget(fd);
        if (!file)
                goto out;

        ei = PROC_I(file->f_dentry->d_inode);

while in proc_ns_fget() we have two return ERR_PTR(...) and not a single
path that would return NULL.  The other caller of proc_ns_fget() treats
ERR_PTR() correctly...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Sat, 4 Jun 2011 14:19:51 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] Fix oops caused by queue refcounting failure

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sat, 4 Jun 2011 14:16:00 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (40 commits)
  tg3: Fix tg3_skb_error_unmap()
  net: tracepoint of net_dev_xmit sees freed skb and causes panic
  drivers/net/can/flexcan.c: add missing clk_put
  net: dm9000: Get the chip in a known good state before enabling interrupts
  drivers/net/davinci_emac.c: add missing clk_put
  af-packet: Add flag to distinguish VID 0 from no-vlan.
  caif: Fix race when conditionally taking rtnl lock
  usbnet/cdc_ncm: add missing .reset_resume hook
  vlan: fix typo in vlan_dev_hard_start_xmit()
  net/ipv4: Check for mistakenly passed in non-IPv4 address
  iwl4965: correctly validate temperature value
  bluetooth l2cap: fix locking in l2cap_global_chan_by_psm
  ath9k: fix two more bugs in tx power
  cfg80211: don't drop p2p probe responses
  Revert "net: fix section mismatches"
  drivers/net/usb/catc.c: Fix potential deadlock in catc_ctrl_run()
  sctp: stop pending timers and purge queues when peer restart asoc
  drivers/net: ks8842 Fix crash on received packet when in PIO mode.
  ip_options_compile: properly handle unaligned pointer
  iwlagn: fix incorrect PCI subsystem id for 6150 devices
  ...

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Fri, 3 Jun 2011 23:11:26 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: Use hlist_entry() for io_context.cic_list.first
  cfq-iosched: Remove bogus check in queue_fail path
  xen/blkback: potential null dereference in error handling
  xen/blkback: don't call vbd_size() if bd_disk is NULL
  block: blkdev_get() should access ->bd_disk only after success
  CFQ: Fix typo and remove unnecessary semicolon
  block: remove unwanted semicolons
  Revert "block: Remove extra discard_alignment from hd_struct."
  nbd: adjust 'max_part' according to part_shift
  nbd: limit module parameters to a sane value
  nbd: pass MSG_* flags to kernel_recvmsg()
  block: improve the bio_add_page() and bio_add_pc_page() descriptions

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier...
Linus Torvalds [Fri, 3 Jun 2011 23:04:10 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/vapier/blackfin

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin:
  Blackfin: strncpy: fix handling of zero lengths

8 years agoMerge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux...
Linus Torvalds [Fri, 3 Jun 2011 23:03:16 +0000]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  asm-generic/unistd.h: support sendmmsg syscall
  tile: enable CONFIG_BUGVERBOSE

8 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Fri, 3 Jun 2011 22:59:32 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix-up free space earlier
  UBIFS: intialize LPT earlier
  UBIFS: assert no fixup when writing a node
  UBIFS: fix clean znode counter corruption in error cases
  UBIFS: fix memory leak on error path
  UBIFS: fix shrinker object count reports
  UBIFS: fix recovery broken by the previous recovery fix
  UBIFS: amend ubifs_recover_leb interface
  UBIFS: introduce a "grouped" journal head flag
  UBIFS: supress false error messages

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt...
Linus Torvalds [Fri, 3 Jun 2011 22:58:48 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/rostedt/linux-2.6-ktest

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-ktest:
  ktest: Ignore unset values of the minconfig in config_bisect
  ktest: Fix result of rebooting the kernel
  ktest: Fix off-by-one in config bisect result

8 years agoMerge branch 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Fri, 3 Jun 2011 22:53:23 +0000]
Merge branch 'rmobile-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'rmobile-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  ARM: mach-shmobile: add DMAC clock definitions on SH7372
  ARM: arch-shmobile: support SDHI card detection on mackerel, using a GPIO
  sh_mobile_meram: MERAM platform data for LCDC

8 years agoMerge branch 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 3 Jun 2011 22:04:25 +0000]
Merge branch 'sh-fixes-for-linus' of git://git./linux/kernel/git/lethal/sh-2.6

* 'sh-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6:
  dmaengine: shdma: fix a regression: initialise DMA channels for memcpy
  dmaengine: shdma: Fix up fallout from runtime PM changes.
  Revert "clocksource: sh_cmt: Runtime PM support"
  Revert "clocksource: sh_tmu: Runtime PM support"
  sh: Fix up asm-generic/ptrace.h fallout.
  sh64: Move from P1SEG to CAC_ADDR for consistent sync.
  sh64: asm/pgtable.h needs asm/mmu.h
  sh: asm/tlb.h needs linux/swap.h
  sh: mark DMA slave ID 0 as invalid
  sh: Update shmin to reflect PIO dependency.
  sh: arch/sh/kernel/process_32.c needs linux/prefetch.h.
  sh: add MMCIF runtime PM support on ecovec
  sh: switch ap325rxa to dynamically manage the platform camera