9 years agoperf ui: Add a map browser
Arnaldo Carvalho de Melo [Thu, 5 Aug 2010 20:00:42 +0000]
perf ui: Add a map browser

Press -> and then "Browse map details" to see the DSO long name as the title
and the list of symbols in the DSO used by the map where the current symbol is.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf symbols: Store the symbol binding
Arnaldo Carvalho de Melo [Thu, 5 Aug 2010 15:59:47 +0000]
perf symbols: Store the symbol binding

So that tools that wan't to act only on a subset of (weak, global,
local) symbols can do so, such as the upcoming uprobes support in 'perf
probe'.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoMerge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux...
Ingo Molnar [Thu, 5 Aug 2010 06:46:15 +0000]
Merge branch 'perf/core' of git://git./linux/kernel/git/acme/linux-2.6 into perf/core

9 years agoMerge branch 'perf/nmi' into perf/core
Ingo Molnar [Thu, 5 Aug 2010 06:45:05 +0000]
Merge branch 'perf/nmi' into perf/core

Conflicts:
kernel/Makefile

Merge reason: Add the now complete topic, fix the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agotracing/kprobes: unregister_trace_probe needs to be called under mutex
Srikar Dronamraju [Wed, 30 Jun 2010 08:45:48 +0000]
tracing/kprobes: unregister_trace_probe needs to be called under mutex

Comment in unregister_trace_probe() says probe_lock will be held when it
gets called. However there is a case where it might called without the
probe_lock being held. Also since we are traversing the probe_list and
deleting an element from the probe_list, probe_lock should be held.

This was first pointed in uprobes traceevent review by Frederic
Weisbecker here.  (http://lkml.org/lkml/2010/5/12/106)

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100630084548.GA10325@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf: expose event__process function
Srikar Dronamraju [Mon, 2 Aug 2010 12:38:51 +0000]
perf: expose event__process function

The event__process function is useful in processing /proc/<pid>/maps.  All of
the functions that are called from event__process are defined in util/event.c.
Though its defined in builtin-top.c, it could be reused for perf probe for
uprobes. Hence moving it to util/event.c and exporting the function.

LKML-Reference: <20100802123851.GD22812@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf events: Fix mmap offset determination
Dave Martin [Tue, 3 Aug 2010 11:48:35 +0000]
perf events: Fix mmap offset determination

Fix buggy-looking code which unnecessarily adjusts the file offset
fields read from /proc/*/maps.

This may have gone unnoticed since the offset is usually 0 (and the
logic in util/symbol.c may work incorrectly for other offset values).

Commiter note:

This fixes a bug introduced in 4af8b35, there is no need to shift pgoff
twice, the show_map_vma routine in fs/proc/task_mmu.c already converts
it from the number of pages to the size in bytes, and that is what
appears in /proc/PID/map.

Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Will Deacon <Will.Deacon@arm.com>
LKML-Reference: <1280836116-6654-2-git-send-email-dave.martin@linaro.org>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoMerge branch 'core' of git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile...
Ingo Molnar [Wed, 4 Aug 2010 14:25:47 +0000]
Merge branch 'core' of git://git./linux/kernel/git/rric/oprofile into perf/core

9 years agoMerge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux...
Ingo Molnar [Tue, 3 Aug 2010 05:45:00 +0000]
Merge branch 'perf/core' of git://git./linux/kernel/git/acme/linux-2.6 into perf/core

9 years agoperf, powerpc: fsl_emb: Restore setting perf_sample_data.period
Scott Wood [Mon, 2 Aug 2010 22:17:18 +0000]
perf, powerpc: fsl_emb: Restore setting perf_sample_data.period

Commit 6b95ed345b9faa4ab3598a82991968f2e9f851bb changed from
a struct initializer to perf_sample_data_init(), but the setting
of the .period member was left out.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: stable@kernel.org
Signed-off-by: Paul Mackerras <paulus@samba.org>

9 years agoperf, powerpc: Convert the FSL driver to use local64_t
Peter Zijlstra [Fri, 9 Jul 2010 08:21:22 +0000]
perf, powerpc: Convert the FSL driver to use local64_t

For some reason the FSL driver got left out when we converted perf
to use local64_t instead of atomic64_t.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

9 years agoperf tools: Don't keep unreferenced maps when unmaps are detected
Arnaldo Carvalho de Melo [Mon, 2 Aug 2010 22:45:23 +0000]
perf tools: Don't keep unreferenced maps when unmaps are detected

For a file with:

[root@emilia linux-2.6-tip]# perf report -D -fi allmodconfig-j32.perf.data | grep events:
     TOTAL events:      36933
      MMAP events:       9056
      LOST events:          0
      COMM events:       1702
      EXIT events:       1887
  THROTTLE events:          8
UNTHROTTLE events:          8
      FORK events:       1894
      READ events:          0
    SAMPLE events:      22378
      ATTR events:          0
EVENT_TYPE events:          0
TRACING_DATA events:          0
  BUILD_ID events:          0
[root@emilia linux-2.6-tip]#

Testing with valgrind and making perf_session__delete() a nop, so that
we can notice how many maps were actually deleted due to not having any
samples on it:

==== HEAP SUMMARY:

Before:

==10339==     in use at exit: 8,909,997 bytes in 68,690 blocks
==10339==   total heap usage: 78,696 allocs, 10,007 frees, 11,925,853 bytes allocated

After:

==10506==     in use at exit: 8,902,605 bytes in 68,606 blocks
==10506==   total heap usage: 78,696 allocs, 10,091 frees, 11,925,853 bytes allocated

I.e. just 84 detected unmaps with no hits out of 9056 for this workload,
not much, but in some other long running workload this may save more
bytes.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf session: Invalidate last_match when removing threads from rb_tree
Arnaldo Carvalho de Melo [Mon, 2 Aug 2010 21:59:28 +0000]
perf session: Invalidate last_match when removing threads from rb_tree

If we receive two PERF_RECORD_EXIT for the same thread, we can end up
reusing session->last_match and trying to remove the thread twice from
the rb_tree, causing a segfault, so invalidade last_match in
perf_session__remove_thread.

Receiving two PERF_RECORD_EXIT for the same thread is a bug, but its a
harmless one if we make the tool more robust, like this patch does.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf session: Free the ref_reloc_sym memory at the right place
Arnaldo Carvalho de Melo [Mon, 2 Aug 2010 21:18:28 +0000]
perf session: Free the ref_reloc_sym memory at the right place

Which is at perf_session__destroy_kernel_maps, counterpart to the
perf_session__create_kernel_maps where the kmap structure is located, just
after the vmlinux_maps.

Make it also check if the kernel maps were actually created, which may not
be the case if, for instance, perf_session__new can't complete due to
permission problems in, for instance, a 'perf report' case, when a
segfault will take place, that is how this was noticed.

The problem was introduced in d65a458, thus post .35.

This also adds code to release guest machines as them are also created
in perf_session__create_kernel_maps, so should be deleted on this newly
introduced counterpart, perf_session__destroy_kernel_maps.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoMerge commit 'v2.6.35' into perf/core
Ingo Molnar [Mon, 2 Aug 2010 06:29:56 +0000]
Merge commit 'v2.6.35' into perf/core

Conflicts:
tools/perf/Makefile
tools/perf/util/hist.c

Merge reason: Resolve the conflicts and update to latest upstream.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

9 years agoMerge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic...
Ingo Molnar [Mon, 2 Aug 2010 06:28:08 +0000]
Merge branch 'perf/core' of git://git./linux/kernel/git/frederic/random-tracing into perf/core

9 years agox86,mmiotrace: Add support for tracing STOS instruction
Marcin Slusarz [Sat, 31 Jul 2010 20:51:01 +0000]
x86,mmiotrace: Add support for tracing STOS instruction

Add support for stos access tracing with mmiotrace.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Acked-by: Pekka Paalanen <pq@iki.fi>
Cc: Nouveau <nouveau@lists.freedesktop.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100731205101.GA5860@joi.lan>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

9 years agoperf, sched migration: Librarize task states and event headers helpers
Frederic Weisbecker [Sun, 1 Aug 2010 12:55:45 +0000]
perf, sched migration: Librarize task states and event headers helpers

Librarize the task state and event headers helpers as they can
be generally useful.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

9 years agoperf, sched migration: Librarize the GUI class
Frederic Weisbecker [Mon, 26 Jul 2010 00:29:44 +0000]
perf, sched migration: Librarize the GUI class

Export the GUI facility in the common library path. It is
going to be useful for other scheduler views.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

9 years agoperf, sched migration: Make the GUI class client agnostic
Frederic Weisbecker [Mon, 26 Jul 2010 00:02:39 +0000]
perf, sched migration: Make the GUI class client agnostic

Make the perf migration GUI generic so that it can be reused for
other kinds of trace painting. No more notion of CPUs or runqueue
from the GUI class, it's now used as a library by the trace parser.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

9 years agoperf, sched migration: Make it vertically scrollable
Frederic Weisbecker [Sun, 25 Jul 2010 21:11:51 +0000]
perf, sched migration: Make it vertically scrollable

With scheduler traces covering more than two cpus, rectangles
of the CPUs 3 and more are not visibles.

This makes the vertical navigation scrollable so that all of the
CPUs rectangles are available.

We also want to be able to zoom vertically, so that we can fit at
best the screen with CPU rectangles, but that's for later.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

9 years agoperf, sched migration: Parameterize cpu height and spacing
Nikhil Rao [Thu, 22 Jul 2010 02:46:27 +0000]
perf, sched migration: Parameterize cpu height and spacing

Without vertical zoom, it is not possible to see all CPUs in a trace
taken on a larger machine. This patch parameterizes the height and
spacing of CPUs so that you can fit more cpus into the screen.

Ideally we should dynamically size/space the CPU rectangles with some
minimum threshold. Until then, this patch is a stop-gap.

Signed-off-by: Nikhil Rao <ncrao@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

9 years agoperf, sched migration: Fix key bindings
Nikhil Rao [Thu, 22 Jul 2010 02:46:11 +0000]
perf, sched migration: Fix key bindings

EVT_KEY_DOWN and EVT_LEFT_DOWN events are not bound to the RootFrame
event handler. As a result, zoom/scroll via keyboard events do not
work. This patch adds the missing bindings.

Signed-off-by: Nikhil Rao <ncrao@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

9 years agoperf, sched migration: Ignore unhandled task states
Frederic Weisbecker [Wed, 21 Jul 2010 21:10:38 +0000]
perf, sched migration: Ignore unhandled task states

Stop printing an error message when we don't have the letter
for a given task state. All we need to know is if the task is
in the TASK_RUNNING state.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

9 years agoperf, sched migration: Handle ignored migrate out events
Frederic Weisbecker [Wed, 21 Jul 2010 20:45:51 +0000]
perf, sched migration: Handle ignored migrate out events

Migrate out events may happen on tasks that are not in the
runqueue, for example this is the case for tasks that are
sleeping. In this case, we don't want to log the migrate out
event in the source runqueue because the task is not eventually
in the runqueue and we have already logged its sleep event.

This fixes timeslices that spuriously propagate a sleep event
from the previous timeslice.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>

9 years agoperf: New migration tool overview
Frederic Weisbecker [Tue, 20 Jul 2010 19:55:33 +0000]
perf: New migration tool overview

This brings a GUI tool that displays an overview of the load
of tasks proportion in each CPUs.

The CPUs forward progress is cut in timeslices. A new timeslice
is created for every runqueue event: a task gets pushed out or
pulled in the runqueue.

For each timeslice, every CPUs rectangle is colored with a red
power that describes the local load against the total load.
This more red is the rectangle, the higher is the given CPU load.
This load is the number of tasks running on the CPU, without
any distinction against the scheduler policy of the tasks, for
now.

Also for each timeslice, the event origin is depicted on the
CPUs that triggered it using a thin colored line on top of the
rectangle timeslice.

These events are:

* sleep: a task went to sleep and has then been pulled out the
  runqueue. The origin color in the thin line is dark blue.

* wake up: a task woke up and has then been pushed in the
  runqueue. The origin color is yellow.

* wake up new: a new task woke up and has then been pushed in the
  runqueue. The origin color is green.

* migrate in: a task migrated in the runqueue due to a load
  balancing operation. The origin color is violet.

* migrate out: reverse of the previous one. Migrate in events
  usually have paired migrate out events in another runqueue.
  The origin color is light blue.

Clicking on a timeslice provides the runqueue event details
and the runqueue state.

The CPU rectangles can be navigated using the usual arrow
controls. Horizontal zooming in/out is possible with the
"+" and "-" buttons.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Venkatesh Pallipadi <venki@google.com>
Cc: Pierre Tardy <tardyp@gmail.com>
Cc: Nikhil Rao <ncrao@google.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>

9 years agotracing: Drop cpparg() macro
Frederic Weisbecker [Tue, 20 Jul 2010 16:41:24 +0000]
tracing: Drop cpparg() macro

Drop the cpparg() macro that wraps CPP parameters. We already have
the PARAM() macro for that, no need to have several versions.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>

9 years agoperf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call
Frederic Weisbecker [Tue, 20 Jul 2010 15:29:54 +0000]
perf: Use tracepoint_synchronize_unregister() to flush any pending tracepoint call

We use synchronize_sched() to ensure a tracepoint won't be called
while/after we release the perf buffers it references.

But the tracepoint API has its own API for that:
tracepoint_synchronize_unregister(). Use it instead as it's
self-explanatory and eases maintainance.

Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>

9 years agoLinux 2.6.35
Linus Torvalds [Sun, 1 Aug 2010 22:11:14 +0000]
Linux 2.6.35

9 years agoNFS: Fix a typo in include/linux/nfs_fs.h
Trond Myklebust [Sun, 1 Aug 2010 17:40:40 +0000]
NFS: Fix a typo in include/linux/nfs_fs.h

nfs_commit_inode() needs to be defined irrespectively of whether or not
we are supporting NFSv3 and NFSv4.

Allow the compiler to optimise away code in the NFSv2-only case by
converting it into an inlined stub function.

Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Sat, 31 Jul 2010 02:02:51 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  cyber2000fb: fix console in truecolor modes
  cyber2000fb: fix machine hang on module load
  SA1111: Eliminate use after free
  ARM: Fix Versatile/Realview/VExpress MMC card detection sense
  ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt
  ARM: Add barriers to io{read,write}{8,16,32} accessors as well
  ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE
  ARM: 6272/1: Convert L2x0 to use the IO relaxed operations
  ARM: 6271/1: Introduce *_relaxed() I/O accessors
  ARM: 6275/1: ux500: don't use writeb() in uncompress.h
  ARM: 6270/1: clean files in arch/arm/boot/compressed/
  ARM: Fix csum_partial_copy_from_user()

9 years agoMerge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6
Linus Torvalds [Sat, 31 Jul 2010 02:02:21 +0000]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Ensure that writepage respects the nonblock flag
  NFS: kswapd must not block in nfs_release_page
  nfs: include space for the NUL in root path

9 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Sat, 31 Jul 2010 02:01:11 +0000]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/edid: Fix the HDTV hack sync adjustment
  drm/radeon/kms: fix radeon mid power profile reporting

9 years agomm: fix ia64 crash when gcore reads gate area
Hugh Dickins [Fri, 30 Jul 2010 17:58:26 +0000]
mm: fix ia64 crash when gcore reads gate area

Debian's ia64 autobuilders have been seeing kernel freeze or reboot
when running the gdb testsuite (Debian bug 588574): dannf bisected to
2.6.32 62eede62dafb4a6633eae7ffbeb34c60dba5e7b1 "mm: ZERO_PAGE without
PTE_SPECIAL"; and reproduced it with gdb's gcore on a simple target.

I'd missed updating the gate_vma handling in __get_user_pages(): that
happens to use vm_normal_page() (nowadays failing on the zero page),
yet reported success even when it failed to get a page - boom when
access_process_vm() tried to copy that to its intermediate buffer.

Fix this, resisting cleanups: in particular, leave it for now reporting
success when not asked to get any pages - very probably safe to change,
but let's not risk it without testing exposure.

Why did ia64 crash with 16kB pages, but succeed with 64kB pages?
Because setup_gate() pads each 64kB of its gate area with zero pages.

Reported-by: Andreas Barth <aba@not.so.argh.org>
Bisected-by: dann frazier <dannf@debian.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: dann frazier <dannf@dannf.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoCIFS: Remove __exit mark from cifs_exit_dns_resolver()
David Howells [Fri, 30 Jul 2010 14:25:19 +0000]
CIFS: Remove __exit mark from cifs_exit_dns_resolver()

Remove the __exit mark from cifs_exit_dns_resolver() as it's called by the
module init routine in case of error, and so may have been discarded during
linkage.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agocyber2000fb: fix console in truecolor modes
Ondrej Zary [Thu, 29 Jul 2010 20:40:54 +0000]
cyber2000fb: fix console in truecolor modes

Return value was not set to 0 in setcolreg() with truecolor modes. This causes
fb_set_cmap() to abort after first color, resulting in blank palette - and
blank console in 24bpp and 32bpp modes.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agocyber2000fb: fix machine hang on module load
Ondrej Zary [Thu, 29 Jul 2010 20:32:20 +0000]
cyber2000fb: fix machine hang on module load

I was testing two CyberPro 2000 based PCI cards on x86 and the machine always
hanged completely when the cyber2000fb module was loaded. It seems that the
card hangs when some registers are accessed too quickly after writing RAMDAC
control register. With this patch, both card work.

Add delay after RAMDAC control register write to prevent hangs on module load.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoSA1111: Eliminate use after free
Julia Lawall [Fri, 30 Jul 2010 15:17:28 +0000]
SA1111: Eliminate use after free

__sa1111_remove always frees its argument, so the subsequent reference to
sachip->saved_state represents a use after free.  __sa1111_remove does not
appear to use the saved_state field, so the patch simply frees it first.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E,E2;
@@

__sa1111_remove(E)
...
(
  E = E2
|
* E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: Fix Versatile/Realview/VExpress MMC card detection sense
Russell King [Thu, 29 Jul 2010 14:58:59 +0000]
ARM: Fix Versatile/Realview/VExpress MMC card detection sense

The MMC card detection sense has become really confused with negations
at various levels, leading to some platforms not detecting inserted
cards.  Fix this by converting everything to positive logic throughout,
thereby getting rid of these negations.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt
Gary King [Thu, 29 Jul 2010 16:37:20 +0000]
ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt

smp_processor_id() must not be called from a preemptible context (this
is checked by CONFIG_DEBUG_PREEMPT).  kmap_high_l1_vipt() was doing so.
This lead to a problem where the wrong per_cpu kmap_high_l1_vipt_depth
could be incremented, causing a BUG_ON(*depth <= 0); in
kunmap_high_l1_vipt().

The solution is to move the call to smp_processor_id() after the call
to preempt_disable().

Originally by: Andrew Howe <ahowe@nvidia.com>

Signed-off-by: Gary King <gking@nvidia.com>
Acked-by: Nicolas Pitre <nico.as.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoperf tools: Release session and symbol resources on exit
Arnaldo Carvalho de Melo [Fri, 30 Jul 2010 21:31:28 +0000]
perf tools: Release session and symbol resources on exit

So that we reduce the noise when looking for leaks using tools such as
valgrind.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf tools: Release thread resources on PERF_RECORD_EXIT
Arnaldo Carvalho de Melo [Fri, 30 Jul 2010 21:28:42 +0000]
perf tools: Release thread resources on PERF_RECORD_EXIT

For long running sessions with many threads with short lifetimes the
amount of memory that the buildid process takes is too much.

Since we don't have hist_entries that may be pointing to them, we can
just release the resources associated with each thread when the exit
(PERF_RECORD_EXIT) event is received.

For normal processing we need to annotate maps with hits, and thus
hist_entries pointing to it and drop the ones that had none. Will be
done in a followup patch.

Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoNFS: Ensure that writepage respects the nonblock flag
Trond Myklebust [Fri, 30 Jul 2010 19:31:57 +0000]
NFS: Ensure that writepage respects the nonblock flag

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

9 years agoNFS: kswapd must not block in nfs_release_page
Trond Myklebust [Fri, 30 Jul 2010 19:31:54 +0000]
NFS: kswapd must not block in nfs_release_page

See https://bugzilla.kernel.org/show_bug.cgi?id=16056

If other processes are blocked waiting for kswapd to free up some memory so
that they can make progress, then we cannot allow kswapd to block on those
processes.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

9 years agonfs: include space for the NUL in root path
Dan Carpenter [Tue, 13 Jul 2010 11:34:59 +0000]
nfs: include space for the NUL in root path

In root_nfs_name() it does the following:

        if (strlen(buf) + strlen(cp) > NFS_MAXPATHLEN) {
                printk(KERN_ERR "Root-NFS: Pathname for remote directory too long.\n");
                return -1;
        }
        sprintf(nfs_export_path, buf, cp);

In the original code if (strlen(buf) + strlen(cp) == NFS_MAXPATHLEN)
then the sprintf() would lead to an overflow.  Generally the rest of the
code assumes that the path can have NFS_MAXPATHLEN (1024) characters and
a NUL terminator so the fix is to add space to the nfs_export_path[]
buffer.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

9 years agoperf probe: Rename common fields/functions from kprobe to probe.
Srikar Dronamraju [Thu, 29 Jul 2010 14:13:51 +0000]
perf probe: Rename common fields/functions from kprobe to probe.

As a precursor for perf to support uprobes, rename fields/functions
that had kprobe in their name but can be shared across perf-kprobes
and perf-uprobes to probe.

Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jim Keniston <jkenisto@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Wielaard <mjw@redhat.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Naren A Devaiah <naren.devaiah@in.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <20100729141351.GG21723@linux.vnet.ibm.com>
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf tui: Make CTRL+Z suspend perf
Arnaldo Carvalho de Melo [Fri, 30 Jul 2010 13:06:06 +0000]
perf tui: Make CTRL+Z suspend perf

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf symbols: Improve debug image search when loading symbols
Dave Martin [Fri, 30 Jul 2010 12:50:09 +0000]
perf symbols: Improve debug image search when loading symbols

Changes:
* Simplification of the main search loop on dso__load()
* Replace the search with a 2-pass search:
* First, try to find an image with a proper symtab.
* Second, repeat the search, accepting dynsym.

A second scan should only ever happen when needed debug images are
missing from the buildid cache or stale, i.e., when the cache is out of
sync.

Currently, the second scan also happens when using separated debug
images, since the caching logic doesn't currently know how to cache
those.  Improvements to the cache behaviour ought to solve that.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf tools: remove extra build-id check factored into dso__load
Dave Martin [Fri, 30 Jul 2010 12:36:08 +0000]
perf tools: remove extra build-id check factored into dso__load

Signed-off-by: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf tools: Factor out buildid reading and make it implicit in dso__load
Dave Martin [Fri, 30 Jul 2010 12:08:08 +0000]
perf tools: Factor out buildid reading and make it implicit in dso__load

If we have a buildid, then we never want to load an image which has no buildid,
or which has a different buildid, so it makes sense for the check to be built
into dso__load and not done separately.  This is fine for old distros which
don't use buildid at all since we do no check in that case.

This refactoring also alleviates some subtle race condition issues by not
opening ELF images twice to check the buildid and then load the symbols, which
could lead to weirdness if an image is replaced under our feet.

Signed-off-by: Dave Martin <dave.martin@linaro.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Thu, 29 Jul 2010 22:23:28 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] etr: fix clock synchronization race
  [S390] Fix IRQ tracing in case of PER

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
Linus Torvalds [Thu, 29 Jul 2010 22:21:44 +0000]
Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: update MAINTAINERS entry

9 years agoMerge branch 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Thu, 29 Jul 2010 22:21:07 +0000]
Merge branch 'fix/hda' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add a PC-beep workaround for ASUS P5-V
  ALSA: hda - Assume PC-beep as default for Realtek
  ALSA: hda - Don't register beep input device when no beep is available
  ALSA: hda - Fix pin-detection of Nvidia HDMI

9 years agoCRED: Fix __task_cred()'s lockdep check and banner comment
David Howells [Thu, 29 Jul 2010 11:45:55 +0000]
CRED: Fix __task_cred()'s lockdep check and banner comment

Fix __task_cred()'s lockdep check by removing the following validation
condition:

lockdep_tasklist_lock_is_held()

as commit_creds() does not take the tasklist_lock, and nor do most of the
functions that call it, so this check is pointless and it can prevent
detection of the RCU lock not being held if the tasklist_lock is held.

Instead, add the following validation condition:

task->exit_state >= 0

to permit the access if the target task is dead and therefore unable to change
its own credentials.

Fix __task_cred()'s comment to:

 (1) discard the bit that says that the caller must prevent the target task
     from being deleted.  That shouldn't need saying.

 (2) Add a comment indicating the result of __task_cred() should not be passed
     directly to get_cred(), but rather than get_task_cred() should be used
     instead.

Also put a note into the documentation to enforce this point there too.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoCRED: Fix get_task_cred() and task_state() to not resurrect dead credentials
David Howells [Thu, 29 Jul 2010 11:45:49 +0000]
CRED: Fix get_task_cred() and task_state() to not resurrect dead credentials

It's possible for get_task_cred() as it currently stands to 'corrupt' a set of
credentials by incrementing their usage count after their replacement by the
task being accessed.

What happens is that get_task_cred() can race with commit_creds():

TASK_1 TASK_2 RCU_CLEANER
-->get_task_cred(TASK_2)
rcu_read_lock()
__cred = __task_cred(TASK_2)
-->commit_creds()
old_cred = TASK_2->real_cred
TASK_2->real_cred = ...
put_cred(old_cred)
  call_rcu(old_cred)
[__cred->usage == 0]
get_cred(__cred)
[__cred->usage == 1]
rcu_read_unlock()
-->put_cred_rcu()
[__cred->usage == 1]
panic()

However, since a tasks credentials are generally not changed very often, we can
reasonably make use of a loop involving reading the creds pointer and using
atomic_inc_not_zero() to attempt to increment it if it hasn't already hit zero.

If successful, we can safely return the credentials in the knowledge that, even
if the task we're accessing has released them, they haven't gone to the RCU
cleanup code.

We then change task_state() in procfs to use get_task_cred() rather than
calling get_cred() on the result of __task_cred(), as that suffers from the
same problem.

Without this change, a BUG_ON in __put_cred() or in put_cred_rcu() can be
tripped when it is noticed that the usage count is not zero as it ought to be,
for example:

kernel BUG at kernel/cred.c:168!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/kernel/mm/ksm/run
CPU 0
Pid: 2436, comm: master Not tainted 2.6.33.3-85.fc13.x86_64 #1 0HR330/OptiPlex
745
RIP: 0010:[<ffffffff81069881>]  [<ffffffff81069881>] __put_cred+0xc/0x45
RSP: 0018:ffff88019e7e9eb8  EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff880161514480 RCX: 00000000ffffffff
RDX: 00000000ffffffff RSI: ffff880140c690c0 RDI: ffff880140c690c0
RBP: ffff88019e7e9eb8 R08: 00000000000000d0 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000040 R12: ffff880140c690c0
R13: ffff88019e77aea0 R14: 00007fff336b0a5c R15: 0000000000000001
FS:  00007f12f50d97c0(0000) GS:ffff880007400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8f461bc000 CR3: 00000001b26ce000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process master (pid: 2436, threadinfo ffff88019e7e8000, task ffff88019e77aea0)
Stack:
 ffff88019e7e9ec8 ffffffff810698cd ffff88019e7e9ef8 ffffffff81069b45
<0> ffff880161514180 ffff880161514480 ffff880161514180 0000000000000000
<0> ffff88019e7e9f28 ffffffff8106aace 0000000000000001 0000000000000246
Call Trace:
 [<ffffffff810698cd>] put_cred+0x13/0x15
 [<ffffffff81069b45>] commit_creds+0x16b/0x175
 [<ffffffff8106aace>] set_current_groups+0x47/0x4e
 [<ffffffff8106ac89>] sys_setgroups+0xf6/0x105
 [<ffffffff81009b02>] system_call_fastpath+0x16/0x1b
Code: 48 8d 71 ff e8 7e 4e 15 00 85 c0 78 0b 8b 75 ec 48 89 df e8 ef 4a 15 00
48 83 c4 18 5b c9 c3 55 8b 07 8b 07 48 89 e5 85 c0 74 04 <0f> 0b eb fe 65 48 8b
04 25 00 cc 00 00 48 3b b8 58 04 00 00 75
RIP  [<ffffffff81069881>] __put_cred+0xc/0x45
 RSP <ffff88019e7e9eb8>
---[ end trace df391256a100ebdd ]---

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoperf symbols: Precisely specify if dso->{long,short}_name should be freed
Arnaldo Carvalho de Melo [Thu, 29 Jul 2010 18:11:30 +0000]
perf symbols: Precisely specify if dso->{long,short}_name should be freed

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agowatchdog: update MAINTAINERS entry
Wim Van Sebroeck [Thu, 29 Jul 2010 18:02:51 +0000]
watchdog: update MAINTAINERS entry

Add Mailing-list and website to watchdog MAINTAINERS entry.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

9 years agoperf record: Release resources at exit
Arnaldo Carvalho de Melo [Thu, 29 Jul 2010 17:08:55 +0000]
perf record: Release resources at exit

So that we can reduce the noise on valgrind when looking for memory
leaks.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoALSA: hda - Add a PC-beep workaround for ASUS P5-V
Takashi Iwai [Thu, 29 Jul 2010 13:30:02 +0000]
ALSA: hda - Add a PC-beep workaround for ASUS P5-V

ASUS P5-V provides a SSID that unexpectedly matches with the value
compilant with Realtek's specification.  Thus the driver interprets
it badly, resulting in non-working PC beep.

This patch adds a white-list for such a case; a white-list of known
devices with working PC beep.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoARM: Add barriers to io{read,write}{8,16,32} accessors as well
Russell King [Thu, 29 Jul 2010 10:38:05 +0000]
ARM: Add barriers to io{read,write}{8,16,32} accessors as well

The ioread/iowrite accessors also need barriers as they're used in
place of readl/writel et.al. in portable drivers.  Create __iormb()
and __iowmb() which are conditionally defined to be barriers dependent
on ARM_DMA_MEM_BUFFERABLE, and always use these macros in the accessors.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE
Catalin Marinas [Wed, 28 Jul 2010 21:01:55 +0000]
ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE

When the coherent DMA buffers are mapped as Normal Non-cacheable
(ARM_DMA_MEM_BUFFERABLE enabled), buffer accesses are no longer ordered
with Device memory accesses causing failures in device drivers that do
not use the mandatory memory barriers before starting a DMA transfer.
LKML discussions led to the conclusion that such barriers have to be
added to the I/O accessors:

http://thread.gmane.org/gmane.linux.kernel/683509/focus=686153
http://thread.gmane.org/gmane.linux.ide/46414
http://thread.gmane.org/gmane.linux.kernel.cross-arch/5250

This patch introduces a wmb() barrier to the write*() I/O accessors to
handle the situations where Normal Non-cacheable writes are still in the
processor (or L2 cache controller) write buffer before a DMA transfer
command is issued. For the read*() accessors, a rmb() is introduced
after the I/O to avoid speculative loads where the driver polls for a
DMA transfer ready bit.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 6272/1: Convert L2x0 to use the IO relaxed operations
Catalin Marinas [Wed, 28 Jul 2010 21:01:25 +0000]
ARM: 6272/1: Convert L2x0 to use the IO relaxed operations

This patch is in preparation for a subsequent patch which adds barriers
to the I/O accessors. Since the mandatory barriers may do an L2 cache
sync, this patch avoids a recursive call into l2x0_cache_sync() via the
write*() accessors and wmb() and a call into l2x0_cache_sync() with the
l2x0_lock held.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 6271/1: Introduce *_relaxed() I/O accessors
Catalin Marinas [Wed, 28 Jul 2010 21:00:54 +0000]
ARM: 6271/1: Introduce *_relaxed() I/O accessors

This patch introduces readl*_relaxed()/write*_relaxed() as the main I/O
accessors (when __mem_pci is defined). The standard read*()/write*()
macros are now based on the relaxed accessors.

This patch is in preparation for a subsequent patch which adds barriers
to the I/O accessors.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 6275/1: ux500: don't use writeb() in uncompress.h
Rabin Vincent [Thu, 29 Jul 2010 11:13:18 +0000]
ARM: 6275/1: ux500: don't use writeb() in uncompress.h

Don't use writeb() in uncompress.h, to avoid the following build errors
when the "Add barriers to the I/O accessors" series is applied.  Use
__raw_writeb() instead.

arch/arm/boot/compressed/misc.o: In function `putc':
arch/arm/mach-ux500/include/mach/uncompress.h:41:
undefined reference to `outer_cache'

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agoARM: 6270/1: clean files in arch/arm/boot/compressed/
Magnus Damm [Wed, 28 Jul 2010 04:46:21 +0000]
ARM: 6270/1: clean files in arch/arm/boot/compressed/

Update the compressed boot Makefile for ARM to
remove files during clean.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agodrm/edid: Fix the HDTV hack sync adjustment
Adam Jackson [Tue, 27 Jul 2010 21:40:32 +0000]
drm/edid: Fix the HDTV hack sync adjustment

We're adjusting horizontal timings only here, moving vsync was just a
slavish translation of a typo in the X server.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agodrm/radeon/kms: fix radeon mid power profile reporting
Daniel J Blueman [Wed, 28 Jul 2010 11:25:58 +0000]
drm/radeon/kms: fix radeon mid power profile reporting

Fix incorrectly reporting 'default' power profile, when it is set to 'mid'.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

9 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel...
Linus Torvalds [Thu, 29 Jul 2010 03:01:26 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  x86,kgdb: Fix hw breakpoint regression

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Thu, 29 Jul 2010 03:00:42 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe
  [SCSI] zfcp: Update status read mempool
  [SCSI] zfcp: Do not wait for SBALs on stopped queue
  [SCSI] zfcp: Fix check whether unchained ct_els is possible
  [SCSI] ipr: fix resource path display and formatting

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
Linus Torvalds [Thu, 29 Jul 2010 02:59:55 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/lrg/voltage-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high
  regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register
  wm8350-regulator: fix wm8350_register_regulator error handling
  ab3100: fix off-by-one value range checking for voltage selector

9 years agoecryptfs: Bugfix for error related to ecryptfs_hash_buckets
Andre Osterhues [Tue, 13 Jul 2010 20:59:17 +0000]
ecryptfs: Bugfix for error related to ecryptfs_hash_buckets

The function ecryptfs_uid_hash wrongly assumes that the
second parameter to hash_long() is the number of hash
buckets instead of the number of hash bits.
This patch fixes that and renames the variable
ecryptfs_hash_buckets to ecryptfs_hash_bits to make it
clearer.

Fixes: CVE-2010-2492

Signed-off-by: Andre Osterhues <aosterhues@escrypt.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agox86,kgdb: Fix hw breakpoint regression
Jason Wessel [Thu, 29 Jul 2010 00:10:30 +0000]
x86,kgdb: Fix hw breakpoint regression

HW breakpoints events stopped working correctly with kgdb
as a result of commit: 018cbffe6819f6f8db20a0a3acd9bab9bfd667e4
(Merge commit 'v2.6.33' into perf/core).

The regression occurred because the behavior changed for setting
NOTIFY_STOP as the return value to the die notifier if the breakpoint
was known to the HW breakpoint API.  Because kgdb is using the HW
breakpoint API to register HW breakpoints slots, it must also now
implement the overflow_handler call back else kgdb does not get to see
the events from the die notifier.

The kgdb_ll_trap function will be changed to be general purpose code
which can allow an easy way to implement the hw_breakpoint API
overflow call back.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Acked-by: Dongdong Deng <dongdong.deng@windriver.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Wed, 28 Jul 2010 18:10:53 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: use complete_all and wake_up_all
  ceph: Correct obvious typo of Kconfig variable "CRYPTO_AES"
  ceph: fix dentry lease release
  ceph: fix leak of dentry in ceph_init_dentry() error path
  ceph: fix pg_mapping leak on pg_temp updates
  ceph: fix d_release dop for snapdir, snapped dentries
  ceph: avoid dcache readdir for snapdir

9 years agoGFS2: Use kmalloc when possible for ->readdir()
Steven Whitehouse [Wed, 28 Jul 2010 16:56:23 +0000]
GFS2: Use kmalloc when possible for ->readdir()

If we don't need a huge amount of memory in ->readdir() then
we can use kmalloc rather than vmalloc to allocate it. This
should cut down on the greater overheads associated with
vmalloc for smaller directories.

We may be able to eliminate vmalloc entirely at some stage,
but this is easy to do right away.

Also using GFP_NOFS to avoid any issues wrt to deleting inodes
while under a glock, and suggestion from Linus to factor out
the alloc/dealloc.

I've given this a test with a variety of different sized
directories and it seems to work ok.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoALSA: hda - Assume PC-beep as default for Realtek
Takashi Iwai [Wed, 28 Jul 2010 15:43:36 +0000]
ALSA: hda - Assume PC-beep as default for Realtek

Enable PC-beep as default for hardwares that aren't compliant with the
SSID value Realtek requires.  In such a case, better to enable the beep
to avoid a regression.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoALSA: hda - Don't register beep input device when no beep is available
Takashi Iwai [Wed, 28 Jul 2010 15:37:16 +0000]
ALSA: hda - Don't register beep input device when no beep is available

We check now the availability of PC beep and skip the build of beep
mixers, but the driver still registers the input device.  This should
be checked as well.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoperf man pages: Fix cut'n'paste error
Arnaldo Carvalho de Melo [Wed, 28 Jul 2010 14:30:10 +0000]
perf man pages: Fix cut'n'paste error

We remove files _from_ the cache.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agodavinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high
Sekhar Nori [Mon, 12 Jul 2010 12:26:21 +0000]
davinci: da850/omap-l138 evm: account for DEFDCDC{2,3} being tied high

Per the da850/omap-l138 Beta EVM SOM schematic, the DEFDCDC2 and
DEFDCDC3 lines are tied high. This leads to a 3.3V IO and 1.2V CVDD
voltage.

Pass the right platform data to the TPS6507x driver so it can operate
on the DEFDCDC{2,3}_HIGH register to read and change voltage levels.

Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

9 years agoregulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register
Anuj Aggarwal [Mon, 12 Jul 2010 12:24:06 +0000]
regulator: tps6507x: allow driver to use DEFDCDC{2,3}_HIGH register

Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

In TPS6507x, depending on the status of DEFDCDC{2,3} pin either
DEFDCDC{2,3}_LOW or DEFDCDC{2,3}_HIGH register needs to be read or
programmed to change the output voltage.

The current driver assumes DEFDCDC{2,3} pins are always tied low
and thus operates only on DEFDCDC{2,3}_LOW register. This need
not always be the case (as is found on OMAP-L138 EVM).

Unfortunately, software cannot read the status of DEFDCDC{2,3} pins.
So, this information is passed through platform data depending on
how the board is wired.

Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>

9 years agoALSA: hda - Fix pin-detection of Nvidia HDMI
Takashi Iwai [Wed, 28 Jul 2010 12:21:55 +0000]
ALSA: hda - Fix pin-detection of Nvidia HDMI

The behavior of Nvidia HDMI codec regarding the pin-detection unsol events
is based on the old HD-audio spec, i.e. PD bit indicates only the update
and doesn't show the current state.  Since the current code assumes the
new behavior, the pin-detection doesn't work relialby with these h/w.

This patch adds a flag for indicating the old spec, and fixes the issue
by checking the pin-detection explicitly for such hardware.

Tested-by: Wei Ni <wni@nvidia.com>
Cc: <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh...
Linus Torvalds [Tue, 27 Jul 2010 21:32:59 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: Pass the correct end of buffer to p9stat_read

9 years agogpio: fix spurious printk when freeing a gpio
Jon Povey [Tue, 27 Jul 2010 20:18:06 +0000]
gpio: fix spurious printk when freeing a gpio

When freeing a gpio that has not been exported, gpio_unexport() prints a
debug message when it should just fall through silently.

Example spurious message:

gpio_unexport: gpio0 status -22

Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Uwe Kleine-K?nig <u.kleine-koenig@pengutronix.de>
Cc: Gregory Bean <gbean@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoedac: mpc85xx: fix coldplug/hotplug module autoloading
Anton Vorontsov [Tue, 27 Jul 2010 20:18:05 +0000]
edac: mpc85xx: fix coldplug/hotplug module autoloading

The MPC85xx EDAC driver is missing module device aliases, so the driver
won't load automatically on boot.  This patch fixes the issue by adding
proper MODULE_DEVICE_TABLE() macros.

Signed-off-by: Anton Vorontsov <avorontsov@mvista.com>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Dave Jiang <djiang@mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodrivers/rtc/rtc-rx8581.c: fix setdatetime
Rudolf Marek [Tue, 27 Jul 2010 20:18:02 +0000]
drivers/rtc/rtc-rx8581.c: fix setdatetime

Fix the logic while writing new date/time to the chip.  The driver
incorrectly wrote back register values to different registers and even
with wrong mask.  The patch adds clearing of the VLF register, which
should be cleared if all date/time values are set.

Signed-off-by: Rudolf Marek <rudolf.marek@sysgo.com>
Acked-by: Wan ZongShun <mcuos.com@gmail.com>
Cc: Martyn Welch <martyn.welch@gefanuc.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agodynamic debug: move ddebug_remove_module() down into free_module()
Jason Baron [Tue, 27 Jul 2010 20:18:01 +0000]
dynamic debug: move ddebug_remove_module() down into free_module()

The command

echo "file ec.c +p" >/sys/kernel/debug/dynamic_debug/control

causes an oops.

Move the call to ddebug_remove_module() down into free_module().  In this
way it should be called from all error paths.  Currently, we are missing
the remove if the module init routine fails.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Reported-by: Thomas Renninger <trenn@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoceph: use complete_all and wake_up_all
Yehuda Sadeh [Tue, 27 Jul 2010 20:11:08 +0000]
ceph: use complete_all and wake_up_all

This fixes an issue triggered by running concurrent syncs. One of the syncs
would go through while the other would just hang indefinitely. In any case, we
never actually want to wake a single waiter, so the *_all functions should
be used.

Signed-off-by: Yehuda Sadeh <yehuda@hq.newdream.net>
Signed-off-by: Sage Weil <sage@newdream.net>

9 years ago9p: Pass the correct end of buffer to p9stat_read
Latchesar Ionkov [Mon, 19 Jul 2010 20:40:03 +0000]
9p: Pass the correct end of buffer to p9stat_read

Pass the correct end of the buffer to p9stat_read.

Signed-off-by: Latchesar Ionkov <lucho@ionkov.net>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

9 years ago[S390] etr: fix clock synchronization race
Martin Schwidefsky [Tue, 27 Jul 2010 17:29:38 +0000]
[S390] etr: fix clock synchronization race

The etr events switch-to-local and sync-check disable the synchronous clock
and schedule a work queue that tries to get the clock back into sync.
If another switch-to-local or sync-check event occurs while the work queue
function etr_work_fn still runs the eacr.es bit and the clock_sync_word can
become inconsistent because check_sync_clock only uses the clock_sync_word
to determine if the clock is in sync or not. The second pass of the
etr_work_fn will reset the eacr.es bit but will leave the clock_sync_word
intact. Fix this race by moving the reset of the eacr.es bit into the
switch-to-local and sync-check functions and by checking the eacr.es bit
as well to decide if the clock needs to be synced.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] Fix IRQ tracing in case of PER
Heiko Carstens [Tue, 27 Jul 2010 17:29:37 +0000]
[S390] Fix IRQ tracing in case of PER

In case user space is single stepped (PER) the program check handler
claims too early that IRQs are enabled on the return path.
Subsequent checks will notice that the IRQ mask in the PSW and
what lockdep thinks the IRQ mask should be do not correlate and
therefore will print a warning to the console and disable lockdep.

Fix this by doing all the work within the correct context.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe
Anton Blanchard [Tue, 13 Jul 2010 04:59:29 +0000]
[SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe

A driver needs to be ready to take an interrupt as soon as it registers
an interrupt handler. I noticed the following oops when testing kdump:

ipr: IBM Power RAID SCSI Device Driver version: 2.5.0 (February 11, 2010)
ibmvscsi 30000002: SRP_VERSION: 16.a
ibmvscsi 30000002: SRP_VERSION: 16.a
Unable to handle kernel paging request for data at address 0x00000000
...
pc: c000000004085e34: .tasklet_action+0xf4/0x1dc
...
c000000004086fe4 .__do_softirq+0x16c/0x2c0
c00000000403138c .call_do_softirq+0x14/0x24
c00000000400ee14 .do_softirq+0xa0/0x104
c00000000408690c .irq_exit+0x70/0xd0
c00000000400f190 .do_IRQ+0x214/0x2a8
c000000004004804 hardware_interrupt_entry+0x1c/0x98
--- Exception: 501 (Hardware Interrupt) at c00000000400c544 .raw_local_irq_restore+0x48/0x54
c00000000465d2a8 ._raw_spin_unlock_irqrestore+0x74/0xa0
c0000000040e7f00 .__setup_irq+0x2ec/0x3f0
c0000000040e8198 .request_threaded_irq+0x194/0x22c
c00000000446d854 .rpavscsi_init_crq_queue+0x284/0x3f0
c00000000446c764 .ibmvscsi_probe+0x688/0x710
c00000000402903c .vio_bus_probe+0x37c/0x3e4
c000000004403f10 .driver_probe_device+0xec/0x1b8
c000000004404088 .__driver_attach+0xac/0xf4
c000000004403184 .bus_for_each_dev+0x98/0x104
c000000004403c98 .driver_attach+0x40/0x60
c0000000044026f0 .bus_add_driver+0x154/0x324
c0000000044045d0 .driver_register+0xe8/0x1ac
c00000000402b2a8 .vio_register_driver+0x54/0x74
c000000004933ea4 .ibmvscsi_module_init+0x80/0xc0
c000000004009834 .do_one_initcall+0x98/0x1d8
c0000000049005b4 .kernel_init+0x27c/0x33c
c000000004031550 .kernel_thread+0x54/0x70

srp_task needs to be setup before request_irq. The patch below fixes the oops.

Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>

9 years agoMerge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perf
Linus Torvalds [Tue, 27 Jul 2010 16:23:39 +0000]
Merge branch 'urgent' of git://git./linux/kernel/git/paulus/perf

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/perf:
  perf, powerpc: Use perf_sample_data_init() for the FSL code

9 years agoMerge git://git.infradead.org/users/cbou/battery-2.6.35
Linus Torvalds [Tue, 27 Jul 2010 16:22:55 +0000]
Merge git://git.infradead.org/users/cbou/battery-2.6.35

* git://git.infradead.org/users/cbou/battery-2.6.35:
  ds2782_battery: Rename get_current to fix build failure / name conflict

9 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 27 Jul 2010 16:21:00 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  s2io: fixing DBG_PRINT() macro
  ath9k: fix dma direction for map/unmap in ath_rx_tasklet
  net: dev_forward_skb should call nf_reset
  net sched: fix race in mirred device removal
  tun: avoid BUG, dump packet on GSO errors
  bonding: set device in RLB ARP packet handler
  wimax/i2400m: Add PID & VID for Intel WiMAX 6250
  ipv6: Don't add routes to ipv6 disabled interfaces.
  net: Fix skb_copy_expand() handling of ->csum_start
  net: Fix corruption of skb csum field in pskb_expand_head() of net/core/skbuff.c
  macvtap: Limit packet queue length
  ixgbe/igb: catch invalid VF settings
  bnx2x: Advance a module version
  bnx2x: Protect statistics ramrod and sequence number
  bnx2x: Protect a SM state change
  wireless: use netif_rx_ni in ieee80211_send_layer2_update

9 years agoperf tools: Remove unneeded code for tracking the cwd in perf sessions
Dave Martin [Tue, 27 Jul 2010 14:46:12 +0000]
perf tools: Remove unneeded code for tracking the cwd in perf sessions

Tidy-up patch to remove some code and struct perf_session data members
which are no longer needed due to the previous patch: "perf tools: Don't
abbreviate file paths relative to the cwd".

LKML-Reference: <new-submission>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf report: Don't abbreviate file paths relative to the cwd
Dave Martin [Tue, 27 Jul 2010 15:40:02 +0000]
perf report: Don't abbreviate file paths relative to the cwd

This avoids around some problems where the full path is executables and DSOs it
needed for finding debug symbols on platforms with separated debug symbol files
such as Ubuntu.  This is simpler than tracking an extra name for each image.

The only impact should be that paths in verbose output from the perf tools
become absolute, instead of relative to .

LKML-Reference: <new-submission>
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf ui: New hists tree widget
Arnaldo Carvalho de Melo [Mon, 26 Jul 2010 20:13:40 +0000]
perf ui: New hists tree widget

The stock newt checkbox tree widget we were using was not really
suitable for hist entry + callchain browsing.

The problems with it were manifold:

- We needed to traverse the whole hist_entry rb_tree to add each entry +
  callchains beforehand.

- No control over the colors used for each row

So a new tree widget, based mostly on slang, was written.

It extends the ui_browser class already used for annotate to allow the
user to fold/unfold branches in the callchains tree, using extra fields
in the symbol_map class that is embedded in hist_entry and
callchain_node instances to store the folding state and when changing
this state calculates the number of rows that are produced when showing
a particular hist_entry instance.

This greatly speeds up browsing as we don't have to upfront touch all
the entries and only calculate callchain related operations when some
callchain branch is actually unfolded.

The memory footprint is also reduced as the data structure is not
duplicated, just some extra fields for controling callchain state and to
simplify the process of seeking thru entries (nr_rows, row_offset) were
added.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf ui: Show the scroll bar over the left window frame
Arnaldo Carvalho de Melo [Mon, 26 Jul 2010 17:08:48 +0000]
perf ui: Show the scroll bar over the left window frame

So that we gain two columns and look more like classical (at least in
TUIs) scroll bars bars.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf ui: Consider the refreshed dimensions in ui_browser__show
Arnaldo Carvalho de Melo [Mon, 26 Jul 2010 16:47:15 +0000]
perf ui: Consider the refreshed dimensions in ui_browser__show

When we call ui_browser__show we may have called
ui_browser__refresh_dimensions to check if the maximum lenght for the
contained entries changed, such as when zooming in and out DSOs or
threads in the hist browser.

For that to happen we must delete the old form, that will take care of
deleting the vertical scrollbar, etc, and then recreate them, with the
new dimensions.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf hist: Introduce routine to measure lenght of formatted entry
Arnaldo Carvalho de Melo [Wed, 21 Jul 2010 20:58:25 +0000]
perf hist: Introduce routine to measure lenght of formatted entry

Will be used to figure out the window width needed in the new tree
widget.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

9 years agoperf ui: Restore SPACE as an alias to PGDN in annotate
Arnaldo Carvalho de Melo [Wed, 21 Jul 2010 20:55:32 +0000]
perf ui: Restore SPACE as an alias to PGDN in annotate

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>