9 years agoMerge branch 'master' of /home/davem/src/GIT/linux-2.6/
David S. Miller [Tue, 13 Apr 2010 07:28:45 +0000]
Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
lib/Kconfig.debug

9 years agosparc64: Fix memory leak in pci_register_iommu_region().
David S. Miller [Sun, 11 Apr 2010 03:26:55 +0000]
sparc64: Fix memory leak in pci_register_iommu_region().

Found by kmemleak.

If request_resource() fails, we leak the struct resource we
allocated to represent the IOMMU mapping area.

This actually happens on sun4v machines because the IOMEM area is only
reported sans the IOMMU region, unlike all previous systems.  I'll
need to fix that at some point, but for now fix the leak.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Add kmemleak annotation to sun4v_build_virq()
David S. Miller [Sun, 11 Apr 2010 03:24:22 +0000]
sparc64: Add kmemleak annotation to sun4v_build_virq()

The only reference we store to this memory is in the form of a
physical address, so kmemleak can't see it.

Add a kmemleak_not_leak() annotation.

It's probably useful to be able to look at a dump of these things
either via debugfs or similar, and thus we could at some point store
them in some kind of table and therefore get rid of this annotation.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Support kmemleak.
David S. Miller [Fri, 9 Apr 2010 07:14:35 +0000]
sparc64: Support kmemleak.

Only missing thing was an _sdata marker in vmlinux.lds.S

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Add function graph tracer support.
David S. Miller [Wed, 7 Apr 2010 11:41:33 +0000]
sparc64: Add function graph tracer support.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Give a stack frame to the ftrace call sites.
David S. Miller [Wed, 7 Apr 2010 02:59:46 +0000]
sparc64: Give a stack frame to the ftrace call sites.

It's the only way we'll be able to implement the function
graph tracer properly.

A positive is that we no longer have to worry about the
linker over-optimizing the tail call, since we don't
use a tail call any more.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Use a seperate counter for timer interrupts and NMI checks, like x86.
David S. Miller [Wed, 7 Apr 2010 00:38:52 +0000]
sparc64: Use a seperate counter for timer interrupts and NMI checks, like x86.

This keeps us from having to use kstat_irqs_cpu() from the NMI handler,
the former of which is a profiled function.

Instead we use a currently empty slot in the cpu_data

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Remove profiling from some low-level bits.
David S. Miller [Wed, 7 Apr 2010 00:34:15 +0000]
sparc64: Remove profiling from some low-level bits.

These include the timer implementation, perf events support, and the
performance counter register (pcr) programming layer.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Kill unnecessary static on local var in ftrace_call_replace().
David S. Miller [Wed, 7 Apr 2010 00:32:08 +0000]
sparc64: Kill unnecessary static on local var in ftrace_call_replace().

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Kill CONFIG_STACK_DEBUG code.
David S. Miller [Tue, 13 Apr 2010 05:36:03 +0000]
sparc64: Kill CONFIG_STACK_DEBUG code.

The generic stack tracer does this job just as well.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Add HAVE_FUNCTION_TRACE_MCOUNT_TEST and tidy up.
David S. Miller [Tue, 13 Apr 2010 05:35:24 +0000]
sparc64: Add HAVE_FUNCTION_TRACE_MCOUNT_TEST and tidy up.

Check function_trace_stop at ftrace_caller

Toss mcount_call and dummy call of ftrace_stub, unnecessary.

Document problems we'll have if the final kernel image link
ever turns on relaxation.

Properly size 'ftrace_call' so it looks right when inspecting
instructions under gdb et al.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Adjust __raw_local_irq_save() to cooperate in NMIs.
David S. Miller [Tue, 13 Apr 2010 05:21:52 +0000]
sparc64: Adjust __raw_local_irq_save() to cooperate in NMIs.

If we are in an NMI then doing a plain raw_local_irq_disable() will
write PIL_NORMAL_MAX into %pil, which is lower than PIL_NMI, and thus
we'll re-enable NMIs and recurse.

Doing a simple:

%pil = %pil | PIL_NORMAL_MAX

does what we want, if we're already at PIL_NMI (15) we leave it at
that setting, else we set it to PIL_NORMAL_MAX (14).

This should get the function tracer working on sparc64.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agosparc64: Use kstack_valid() in die_if_kernel().
David S. Miller [Tue, 13 Apr 2010 05:16:22 +0000]
sparc64: Use kstack_valid() in die_if_kernel().

This gets rid of a local function (is_kernel_stack()) which tries to
do the same thing, yet poorly in that it doesn't handle IRQ stacks
properly.

Signed-off-by: David S. Miller <davem@davemloft.net>

9 years agoLinux 2.6.34-rc4
Linus Torvalds [Tue, 13 Apr 2010 01:41:35 +0000]
Linux 2.6.34-rc4

9 years agoMerge branch 'anonvma'
Linus Torvalds [Tue, 13 Apr 2010 01:39:58 +0000]
Merge branch 'anonvma'

* anonvma:
  anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma
  anon_vma: clone the anon_vma chain in the right order
  vma_adjust: fix the copying of anon_vma chains
  Simplify and comment on anon_vma re-use for anon_vma_prepare()

9 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 13 Apr 2010 01:37:34 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (21 commits)
  ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms
  ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock
  ARM: 6031/1: fix Thumb-2 decompressor
  ARM: 6029/1: ep93xx: gpio.c: local functions should be static
  ARM: 6028/1: ARM: add MAINTAINERS for U300
  ARM: 6024/1: bcmring: fix missing down on semaphore in dma.c
  MXC: mach_armadillo5x0: Add USB Host support.
  ARM mach-mx3: duplicated include
  ARM mach-mx3: duplicated include
  imx31: add watchdog device on litekit board.
  imx3: Add watchdog platform device support
  MXC: mach-mx31_3ds: add support for freescale mc13783 power management device.
  MXC: mach-mx31_3ds: Add SPI1 device support.
  MXC: mach-mx31_3ds: Add support for on board NAND Flash.
  MXC: mach-mx31_3ds: Update variable names over recent mach name modification.
  imx31: fix parent clock for rtc
  i.MX51: remove NFC AXI static mapping
  i.MX51: determine silicon revision dynamically
  i.MX51: map TZIC dynamically
  i.MX51: Use correct clock for gpt
  ...

9 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs...
Linus Torvalds [Tue, 13 Apr 2010 01:37:04 +0000]
Merge branch 'master' of git://git./linux/kernel/git/mason/btrfs-unstable

* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: make sure the chunk allocator doesn't create zero length chunks
  Btrfs: fix data enospc check overflow

9 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Tue, 13 Apr 2010 01:36:49 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  quota: Fix possible dq_flags corruption
  quota: Hide warnings about writes to the filesystem before quota was turned on
  ext3: symlink must be handled via filesystem specific operation
  ext2: symlink must be handled via filesystem specific operation

9 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux...
Linus Torvalds [Tue, 13 Apr 2010 01:36:34 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-udf-2.6

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-udf-2.6:
  udf: add speciffic ->setattr callback
  udf: potential integer overflow

9 years agoMerge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
Linus Torvalds [Tue, 13 Apr 2010 01:36:11 +0000]
Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (36 commits)
  MIPS: Calculate proper ebase value for 64-bit kernels
  MIPS: Alchemy: DB1200: Remove custom wait implementation
  MIPS: Big Sur: Make defconfig more useful.
  MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules
  MIPS: Sibyte: Fix M3 TLB exception handler workaround.
  MIPS: BCM63xx: Fix build failure in board_bcm963xx.c
  MIPS: uasm: Add OR instruction.
  MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions.
  MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot.
  MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback
  MIPS: BCM63xx: Fix typo in cpu-feature-overrides file.
  MIPS: BCM63xx: Add support for second uart.
  MIPS: BCM63xx: Fix double gpio registration.
  MIPS: BCM63xx: Add DWVS0 board
  MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards.
  MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count
  MIPS: libgcc.h: Checkpatch cleanup
  MIPS: Loongson-2F: Flush the branch target history in BTB and RAS
  MIPS: Move signal trampolines off of the stack.
  MIPS: Preliminary VDSO
  ...

9 years agoMerge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linux
Linus Torvalds [Tue, 13 Apr 2010 01:34:56 +0000]
Merge branch 'for-2.6.34' of git://linux-nfs.org/~bfields/linux

* 'for-2.6.34' of git://linux-nfs.org/~bfields/linux:
  svcrdma: RDMA support not yet compatible with RPC6

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke...
Linus Torvalds [Tue, 13 Apr 2010 01:34:25 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: fix typo "numer" -> "number" in alloc.c
  nilfs2: Remove an uninitialization warning in nilfs_btree_propagate_v()
  nilfs2: fix a wrong type conversion in nilfs_ioctl()

9 years agoanonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma
Linus Torvalds [Mon, 12 Apr 2010 19:44:29 +0000]
anonvma: when setting up page->mapping, we need to pick the _oldest_ anonvma

Otherwise we might be mapping in a page in a new mapping, but that page
(through the swapcache) would later be mapped into an old mapping too.
The page->mapping must be the case that works for everybody, not just
the mapping that happened to page it in first.

Here's the scenario:

 - page gets allocated/mapped by process A. Let's call the anon_vma we
   associate the page with 'A' to keep it easy to track.

 - Process A forks, creating process B. The anon_vma in B is 'B', and has
   a chain that looks like 'B' -> 'A'. Everything is fine.

 - Swapping happens. The page (with mapping pointing to 'A') gets swapped
   out (perhaps not to disk - it's enough to assume that it's just not
   mapped any more, and lives entirely in the swap-cache)

 - Process B pages it in, which goes like this:

        do_swap_page ->
          page = lookup_swap_cache(entry);
         ...
          set_pte_at(mm, address, page_table, pte);
          page_add_anon_rmap(page, vma, address);

   And think about what happens here!

   In particular, what happens is that this will now be the "first"
   mapping of that page, so page_add_anon_rmap() used to do

        if (first)
                __page_set_anon_rmap(page, vma, address);

   and notice what anon_vma it will use? It will use the anon_vma for
   process B!

   What happens then? Trivial: process 'A' also pages it in (nothing
   happens, it's not the first mapping), and then process 'B' execve's
   or exits or unmaps, making anon_vma B go away.

   End result: process A has a page that points to anon_vma B, but
   anon_vma B does not exist any more.  This can go on forever.  Forget
   about RCU grace periods, forget about locking, forget anything like
   that.  The bug is simply that page->mapping points to an anon_vma
   that was correct at one point, but was _not_ the one that was shared
   by all users of that possible mapping.

Changing it to always use the deepest anon_vma in the anonvma chain gets
us to the safest model.

This can be improved in certain cases: if we know the page is private to
just this particular mapping (for example, it's a new page, or it is the
only swapcache entry), we could pick the top (most specific) anon_vma.

But that's a future optimization. Make it _work_ reliably first.

Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Borislav Petkov <bp@alien8.de> [ "What do you know, I think you fixed it!" ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoanon_vma: clone the anon_vma chain in the right order
Linus Torvalds [Mon, 12 Apr 2010 00:15:03 +0000]
anon_vma: clone the anon_vma chain in the right order

We want to walk the chain in reverse order when cloning it, so that the
order of the result chain will be the same as the order in the source
chain.  When we add entries to the chain, they go at the head of the
chain, so we want to add the source head last.

Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Borislav Petkov <bp@alien8.de> [ "No, it still oopses" ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agovma_adjust: fix the copying of anon_vma chains
Linus Torvalds [Sat, 10 Apr 2010 22:22:30 +0000]
vma_adjust: fix the copying of anon_vma chains

When we move the boundaries between two vma's due to things like
mprotect, we need to make sure that the anon_vma of the pages that got
moved from one vma to another gets properly copied around.  And that was
not always the case, in this rather hard-to-follow code sequence.

Clarify the code, and fix it so that it copies the anon_vma from the
right source.

Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Borislav Petkov <bp@alien8.de> [ "Yeah, not so much this one either" ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoSimplify and comment on anon_vma re-use for anon_vma_prepare()
Linus Torvalds [Sat, 10 Apr 2010 17:36:19 +0000]
Simplify and comment on anon_vma re-use for anon_vma_prepare()

This changes the anon_vma reuse case to require that we only reuse
simple anon_vma's - ie the case when the vma only has a single anon_vma
associated with it.

This means that a reuse of an anon_vma from an adjacent vma will always
guarantee that both vma's are associated not only with the same
anon_vma, they will also have the same anon_vma chain (of just a single
entry in this case).

And since anon_vma re-use was the only case where the same anon_vma
might be associated with different chains of anon_vma's, we now have the
case that every vma that shares the same anon_vma will always also have
the same chain.  That makes it much easier to think about merging vma's
that share the same anon_vma's: you can always just drop the other
anon_vma chain in anon_vma_merge() since you know that they are always
identical.

This also splits up the function to validate the anon_vma re-use, and
adds a lot of commentary about the possible races.

Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Borislav Petkov <bp@alien8.de> [ "That didn't fix it" ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoquota: Fix possible dq_flags corruption
Andrew Perepechko [Mon, 12 Apr 2010 18:16:50 +0000]
quota: Fix possible dq_flags corruption

dq_flags are modified non-atomically in do_set_dqblk via __set_bit calls and
atomically for example in mark_dquot_dirty or clear_dquot_dirty.  Hence a
change done by an atomic operation can be overwritten by a change done by a
non-atomic one. Fix the problem by using atomic bitops even in do_set_dqblk.

Signed-off-by: Andrew Perepechko <andrew.perepechko@sun.com>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoquota: Hide warnings about writes to the filesystem before quota was turned on
Jan Kara [Tue, 6 Apr 2010 16:52:47 +0000]
quota: Hide warnings about writes to the filesystem before quota was turned on

For a root filesystem write to the filesystem before quota is turned on happens
regularly and there's no way around it because of writes to syslog, /etc/mtab,
and similar. So the warning is rather pointless for ordinary users. It's
still useful during development so we just hide the warning behind
__DQUOT_PARANOIA config option.

Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext3: symlink must be handled via filesystem specific operation
Dmitry Monakhov [Fri, 26 Mar 2010 16:29:55 +0000]
ext3: symlink must be handled via filesystem specific operation

generic setattr implementation is no longer responsible for
quota transfer so synlinks must be handled via ext3_setattr.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoext2: symlink must be handled via filesystem specific operation
Dmitry Monakhov [Fri, 26 Mar 2010 16:29:54 +0000]
ext2: symlink must be handled via filesystem specific operation

generic setattr implementation is no longer responsible for
quota transfer so synlinks must be handled via ext2_setattr.

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: Jan Kara <jack@suse.cz>

9 years agoMIPS: Calculate proper ebase value for 64-bit kernels
David Daney [Tue, 6 Apr 2010 20:29:50 +0000]
MIPS: Calculate proper ebase value for 64-bit kernels

The ebase is relative to CKSEG0 not CAC_BASE.  On a 32-bit kernel they
are the same thing, for a 64-bit kernel they are not.

It happens to kind of work on a 64-bit kernel as they both reference
the same physical memory.  However since the CPU uses the CKSEG0 base,
determining if a J instruction will reach always gives the wrong result
unless we use the same number the CPU uses.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1093/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Alchemy: DB1200: Remove custom wait implementation
Manuel Lauss [Sat, 3 Apr 2010 15:07:03 +0000]
MIPS: Alchemy: DB1200: Remove custom wait implementation

While playing with the out-of-tree MAE driver module, the system would
panic after a while in the db1200 custom wait code after wakeup due to
a clobbered k0 register being used as target address of a store op.

Remove the custom wait implementation and revert back to the Alchemy-
recommended implementation already set as default.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: http://patchwork.linux-mips.org/patch/1092/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Big Sur: Make defconfig more useful.
Ralf Baechle [Sat, 3 Apr 2010 09:59:52 +0000]
MIPS: Big Sur: Make defconfig more useful.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules
Anton Altaparmakov [Thu, 25 Mar 2010 20:48:12 +0000]
MIPS: Fix __vmalloc() etc. on MIPS for non-GPL modules

Commit b3594a089f1c17ff919f8f78505c3f20e1f6f8ce (lmo) rsp.
351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 (kernel.org) break non-GPL modules
that use __vmalloc() or any of the vmap(), vm_map_ram(), etc functions on
MIPS.

All those functions are EXPORT_SYMBOL() so are meant to be allowed to be
used by non-GPL kernel modules.  These calls all take page protection as
an argument which is normally a constant like PAGE_KERNEL.

This commit causes all protection constants like PAGE_KERNEL to not be
constants and instead to contain the GPL-only symbol _page_cachable_default.

This means that all calls to __vmalloc(), vmap(), etc, cause non-GPL
modules to fail to link with the complaint that they are trying to use the
GPL-only symbol _page_cachable_default...

Change EXPORT_SYMBOL_GPL(_page_cachable_default) to EXPORT_SYMBOL() for
non-GPL modules that call __vmalloc(), vmap(), vm_map_ram() etc.

Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Cc: Chris Dearman <chris@mips.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1084/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Sibyte: Fix M3 TLB exception handler workaround.
Ralf Baechle [Tue, 23 Mar 2010 16:56:38 +0000]
MIPS: Sibyte: Fix M3 TLB exception handler workaround.

The M3 workaround needs to cmpare the region and VPN2 fields only.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Fix build failure in board_bcm963xx.c
Florian Fainelli [Tue, 23 Mar 2010 09:30:08 +0000]
MIPS: BCM63xx: Fix build failure in board_bcm963xx.c

Since 2083e8327aeeaf818b0e4522a9d2539835c60423, the SPROM is now registered
in the board_prom_init callback, but it references variables and functions
which are declared below.  Move the variables and functions above
board_prom_init.

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1077/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: uasm: Add OR instruction.
Ralf Baechle [Tue, 23 Mar 2010 14:54:50 +0000]
MIPS: uasm: Add OR instruction.

This is needed for the fix of the M3 workaround.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Sibyte: Apply M3 workaround only on affected chip types and versions.
Ralf Baechle [Mon, 22 Mar 2010 23:02:43 +0000]
MIPS: Sibyte: Apply M3 workaround only on affected chip types and versions.

Previously it was unconditionally used on all Sibyte family SOCs.  The
M3 bug has to be handled in the TLB exception handler which is extremly
performance sensitive, so this modification is expected to deliver around
2-3% performance improvment.  This is important as required changes to the
M3 workaround will make it more costly.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot.
Maxime Bizon [Sat, 30 Jan 2010 17:34:58 +0000]
MIPS: BCM63xx: Initialize gpio_out_low & out_high to current value at boot.

To avoid a glitch during GPIO initialisation read GPIO output register
values left by the firmware.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/903/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback
Florian Fainelli [Tue, 2 Mar 2010 13:38:47 +0000]
MIPS: BCM63xx: Register SSB SPROM fallback in board's first stage callback

Signed-off-by: Florian Fainelli <ffainelli@freebox.fr>
To: Maxime Bizon <mbizon@freebox.fr>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1017/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Fix typo in cpu-feature-overrides file.
Maxime Bizon [Sat, 30 Jan 2010 17:34:56 +0000]
MIPS: BCM63xx: Fix typo in cpu-feature-overrides file.

Fix typo: CONFIG_BCMCPU_IS_63xx does not exist;
CONFIG_BCM63XX_CPU_63xx is the valid config option.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/901/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Add support for second uart.
Maxime Bizon [Sat, 30 Jan 2010 17:34:55 +0000]
MIPS: BCM63xx: Add support for second uart.

The BCm63xx SOC has two uarts.  Some boards use the second one for
bluetooth.  This patch changes platform device registration code to
handle this.  Changes to the UART driver were already merged in
6a2c7eabfd09ca7986bf96b8958a87ca041a19d8.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/900/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Fix double gpio registration.
Maxime Bizon [Sat, 30 Jan 2010 17:34:54 +0000]
MIPS: BCM63xx: Fix double gpio registration.

bcm63xx_gpio_init is already called from prom_init to allow board to use
them early, so we can remove the unneeded arch_initcall.

Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
To: linux-mips@linux-mips.org
Cc: Maxime Bizon <mbizon@freebox.fr>
Patchwork: http://patchwork.linux-mips.org/patch/899/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Add DWVS0 board
Florian Fainelli [Mon, 1 Mar 2010 22:36:27 +0000]
MIPS: BCM63xx: Add DWVS0 board

The DWVS0 board is a BCM6358-based board with an on-board OHCI controler.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1015/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards.
Florian Fainelli [Mon, 1 Mar 2010 22:36:22 +0000]
MIPS: BCM63xx: Add the RTA1025W-16 BCM6348-based board to suppported boards.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1014/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count
Florian Fainelli [Mon, 1 Mar 2010 22:36:32 +0000]
MIPS: BCM63xx: Fix BCM6338 and BCM6345 gpio count

The number of GPIOs on BCM6338 is 8, while BCM6345 has only 16 GPIOs
available.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1016/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: libgcc.h: Checkpatch cleanup
Andrea Gelmini [Sat, 27 Feb 2010 16:51:23 +0000]
MIPS: libgcc.h: Checkpatch cleanup

arch/mips/lib/libgcc.h:21: ERROR: open brace '{' following union go on the same line

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
To: linux-kernel@vger.kernel.org
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: linux-mips@linux-mips.org
Cc: linux-sh@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1007/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Loongson-2F: Flush the branch target history in BTB and RAS
Wu Zhangjin [Sat, 13 Mar 2010 04:34:15 +0000]
MIPS: Loongson-2F: Flush the branch target history in BTB and RAS

As per chapter 15 "Errata: Issue of Out-of-order in loongson"[1] to work
around the Loongson 2F erratum we need to do:

"When switching from user mode to kernel mode, you should flush the
branch target history such as BTB and RAS."

[1] Chinese version: http://www.loongson.cn/uploadfile/file/200808211
[2] English version of chapter 15:
    http://groups.google.com.hk/group/loongson-dev/msg/e0d2e220958f10a6?dmode=source

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Shinya Kuribayashi <shinya.kuribayashi@necel.com>
Patchwork: http://patchwork.linux-mips.org/patch/1066/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Move signal trampolines off of the stack.
David Daney [Fri, 19 Feb 2010 00:13:05 +0000]
MIPS: Move signal trampolines off of the stack.

This is a follow on to the vdso patch.

Since all processes now have signal trampolines permanently mapped, we
can use those instead of putting the trampoline on the stack and
invalidating the corresponding icache across all CPUs.  We also get rid
of a bunch of ICACHE_REFILLS_WORKAROUND_WAR code.

[Ralf: GDB 7.1 which has the necessary modifications to allow backtracing
over signal frames will supposedly be released tomorrow.  The old signal
frame format obsoleted by this patch exists in two variations, for sane
processors and for those requiring ICACHE_REFILLS_WORKAROUND_WAR.  So
there was never a GDB which did support backtracing over signal frames
on all MIPS systems.  This convinved me this series should be applied and
pushed upstream as soon as possible.]

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/974/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Preliminary VDSO
David Daney [Fri, 19 Feb 2010 00:13:04 +0000]
MIPS: Preliminary VDSO

This is a preliminary patch to add a vdso to all user processes.  Still
missing are ELF headers and .eh_frame information.  But it is enough to
allow us to move signal trampolines off of the stack.  Note that emulation
of branch delay slots in the FPU emulator still requires the stack.

We allocate a single page (the vdso) and write all possible signal
trampolines into it.  The stack is moved down by one page and the vdso is
mapped into this space.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/975/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Add SYSCALL to uasm.
David Daney [Fri, 19 Feb 2010 00:13:03 +0000]
MIPS: Add SYSCALL to uasm.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/976/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Fix SSB PCIcore IO resource management
Andreas Ferber [Tue, 16 Mar 2010 11:35:51 +0000]
MIPS: Fix SSB PCIcore IO resource management

The SSB PCIcore code reused the IO resource fixup code from the original
2.4.x Broadcom patch for BCM47xx based devices, which was a quick hack
for doing PCI IO resource configuration back then (the boot loader
doesn't configure PCI devices on this platform).

However, this code is no longer necessary since the kernel now can do
PCI resource management fine all by itself, so remove the old code.

When removing the code, it becomes obvious that the mem_offset setting
in the PCIcore driver was wrong, however this was masked by the fixup
code before, except in a few cases involving yenta_socket. For BCM47xx,
the correct offset is 0, and since this is the only device using PCIcore
in host mode, the offset can simply be removed unconditionally.

Signed-off-by: Andreas Ferber <af@chaos-agency.de>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Cc: Markus Wigge <markus@cultcom.de>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1070/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET
Florian Fainelli [Wed, 10 Mar 2010 08:51:09 +0000]
MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET

On AR7, we already redefine PHYS_OFFSET to match the system specifities, it
is however not sufficient when unsing dma_{map,unmap}_single, specifically
in the ethernet driver, we must also adjust CAC_ADDR and UNCAC_ADDR for DMA
to work correctly. This patch fixes the following issue, seen in cpmac_open:

ops[#1]:
Cpu 0
$ 0   : 00000000 10008400 a0f5b120 00000000
$ 4   : 94c59000 94270f64 00000020 00000010
$ 8   : 00000010 94103ce0 0000000a 94c03400
$12   : ffffffff 94c03408 94c03410 00000001
$16   : a0f5ba20 00000041 94c592c0 94c59200
$20   : 94c59000 000005ee 00002000 9438c8f0
$24   : 00000010 00000000
$28   : 94fac000 94fadd58 94390000 942724a8
Hi    : 00000000
Lo    : 00000001
epc   : 94272518 cpmac_open+0x208/0x3f8
    Not tainted
ra    : 942724a8 cpmac_open+0x198/0x3f8
Status: 10008403    KERNEL EXL IE
Cause : 3080000c
BadVA : 00000000
PrId  : 00018448 (MIPS 4KEc)
Modules linked in:
Process ifconfig (pid: 278, threadinfo=94fac000, task=94e79590, tls=00000000)
Stack : 7f8da120 2ab05cb0 94c59000 943356f0 00000000 943d0000 94c59000 943356f0
        94c59030 943d0000 943c27c0 94fade10 00000000 94fade20 94c59000 9428e5a4
        00000000 94c59000 00000041 94289768 94c59000 00000041 00001002 00001043
        00000000 9428d810 00000000 94fade10 7f8da4e8 9428e6b8 00000000 7f8da4a8
        7f8da4e8 00008914 00000000 942f7f2c 00000000 00000008 00408000 00008913
        ...
Call Trace:
[<94272518>] cpmac_open+0x208/0x3f8
[<9428e5a4>] dev_open+0x164/0x264
[<9428d810>] dev_change_flags+0xd0/0x1bc
[<942f7f2c>] devinet_ioctl+0x2d8/0x908
[<942771f8>] sock_ioctl+0x29c/0x2fc
[<941a0fb4>] vfs_ioctl+0x2c/0x7c
[<941a16ec>] do_vfs_ioctl+0x5dc/0x630
[<941a1790>] sys_ioctl+0x50/0x88
[<94101e10>] stack_done+0x20/0x3c

Signed-off-by: peter fuerst <post@pfrst.de>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1050/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: AR7: Fix phat finger of cpmac fixed_phy_add
Alexander Clouter [Sat, 13 Mar 2010 00:09:15 +0000]
MIPS: AR7: Fix phat finger of cpmac fixed_phy_add

Seems I trimmed one too many lines in
29ca2d81bd2a62fa86bc9a72ddadcf03d7daf795 (lmo) rsp
7084338eb8eb0cc021ba86c340157bad397f3f0b (kernel.org) which led to no
functioning Ethernet on my WAG54Gv2.  This patch restores the AWOL line.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1065/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: AR7: Fix phat finger of reset bit in vlynq_high_data
Alexander Clouter [Fri, 12 Mar 2010 19:39:48 +0000]
MIPS: AR7: Fix phat finger of reset bit in vlynq_high_data

Seems in my whitespace cleanup 0f2536082d01448daeced8d9e82c3ba1751fefa3
(lmo) rsp.  8c2961da46abd85a71d20f2b169bf80618e (kernel.org) caused AR7
to no longer get as far as init.  Fixed my phat fingering.

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1064/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Loongson: Add module info to the loongson2_clock driver
Wu Zhangjin [Tue, 9 Mar 2010 16:53:21 +0000]
MIPS: Loongson: Add module info to the loongson2_clock driver

This patch fixes a kernel warning when loading the the loongson2_clock
driver:

"Feb 25 23:42:27 localhost kernel: [    4.965000] loongson2_clock: module
license 'unspecified' taints kernel."

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Reported-by: Liu Shiwei <liushiwei@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1045/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Lemote 2F: Ensure atomic execution of _rdmsr and _wrmsr
Wu Zhangjin [Thu, 11 Mar 2010 03:30:50 +0000]
MIPS: Lemote 2F: Ensure atomic execution of _rdmsr and _wrmsr

On Lemote 2F CS5536 MSRs are accessed through a index / data register pair.
The access sequence must be protected by a spinlock to be atomic.

Without this rebooting in fs2f_reboot() may fail.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1058/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Initialize an atomic_t properly with ATOMIC_INIT(0).
Robert P. J. Day [Sat, 27 Feb 2010 17:02:51 +0000]
MIPS: Initialize an atomic_t properly with ATOMIC_INIT(0).

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1008/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Fix elfcore.c build warning
Ralf Baechle [Thu, 11 Mar 2010 07:48:14 +0000]
MIPS: Fix elfcore.c build warning

kernel/elfcore.c includes <linux/elf.h> which includes the <asm/elf.h>.  In
<asm/elf.h>, struct pt_regs is declared inside the parameter list of the
elf_dump_regs function which causes a kernel build warning.

Fixed by adding a forward declaration of struct pt_regs.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Octeon: Remove redundant declaration of octeon_reserve32_memory
Yang Shi [Wed, 3 Mar 2010 08:43:20 +0000]
MIPS: Octeon: Remove redundant declaration of octeon_reserve32_memory

octeon_reserve32_memory is defined In Octeon's setup.c, so remove the
redundant extern declaration of this variable.

Signed-off-by: Yang Shi <yang.shi@windriver.com>
To: f.fainelli@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1022/
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Trace: Don't trace irqsoff for the idle process
Wu Zhangjin [Tue, 9 Mar 2010 16:27:28 +0000]
MIPS: Trace: Don't trace irqsoff for the idle process

Like x86 did in arch/x86/kernel/{process_32.c,process_64.c}, also don't
trace irqsoff for idle.

If there's no useful work to be done, we don't care about the irqsoff
duration. If we trace the idle process, the max duration of irqsoff will
be the idle time and make the irqsoff tracer useless.

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Patchwork: http://patchwork.linux-mips.org/patch/1044/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: delay: Fix use of current_cpu_data in preemptable code.
Ralf Baechle [Wed, 10 Mar 2010 15:16:04 +0000]
MIPS: delay: Fix use of current_cpu_data in preemptable code.

This may lead to warnings like:

BUG: using smp_processor_id() in preemptible [00000000] code: reboot/1989
caller is __udelay+0x14/0x70
Call Trace:
[<ffffffff8110ad28>] dump_stack+0x8/0x34
[<ffffffff812dde04>] debug_smp_processor_id+0xf4/0x110
[<ffffffff812d90bc>] __udelay+0x14/0x70
[<ffffffff81378274>] md_notify_reboot+0x12c/0x148
[<ffffffff81161054>] notifier_call_chain+0x64/0xc8
[<ffffffff811614dc>] __blocking_notifier_call_chain+0x64/0xc0
[<ffffffff8115566c>] kernel_restart_prepare+0x1c/0x38
[<ffffffff811556cc>] kernel_restart+0x14/0x50
[<ffffffff8115581c>] SyS_reboot+0x10c/0x1f0
[<ffffffff81103684>] handle_sysn32+0x44/0x84

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Octeon: Remove #if 0 code.
David Daney [Wed, 3 Mar 2010 19:07:43 +0000]
MIPS: Octeon: Remove #if 0 code.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1029/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB
David Daney [Wed, 3 Mar 2010 19:07:07 +0000]
MIPS: Octeon: Remove vestiges of CONFIG_CAVIUM_RESERVE32_USE_WIRED_TLB

The config option CAVIUM_RESERVE32_USE_WIRED_TLB is not supported.
Remove the dead code controlled by it.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1028/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Cavium: Remove unused watchdog code.
Ralf Baechle [Tue, 9 Mar 2010 19:16:15 +0000]
MIPS: Cavium: Remove unused watchdog code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

9 years agoMIPS: Fix build breakage if CONFIG_DEBUG_FS is enabled.
Ralf Baechle [Mon, 8 Mar 2010 18:38:13 +0000]
MIPS: Fix build breakage if CONFIG_DEBUG_FS is enabled.

Caused by 38b7827fcdd660f591d645bd3ae6644456a4773c - no, cpu_local_* was
not unused.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: David Daney <ddaney@caviumnetworks.com>

9 years agonilfs2: fix typo "numer" -> "number" in alloc.c
Ryusuke Konishi [Sun, 11 Apr 2010 16:51:03 +0000]
nilfs2: fix typo "numer" -> "number" in alloc.c

Fixes the typo found in a warning message of a persistent object
allocator function.

Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>

9 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Fri, 9 Apr 2010 18:53:06 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/mlx4: Check correct variable for allocation failure
  RDMA/nes: Correct cap.max_inline_data assignment in nes_query_qp()
  RDMA/cm: Set num_paths when manually assigning path records
  IB/cm: Fix device_create() return value check

9 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 9 Apr 2010 18:52:48 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] Update default configuration.
  [S390] nss: add missing .previous statement to asm function
  [S390] increase default size of vmalloc area
  [S390] s390: disable change bit override
  [S390] fix io_return critical section cleanup
  [S390] sclp_async: potential buffer overflow
  [S390] arch/s390/kernel: Add missing unlock

9 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Fri, 9 Apr 2010 18:50:29 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (34 commits)
  cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch
  loop: Update mtime when writing using aops
  block: expose the statistics in blkio.time and blkio.sectors for the root cgroup
  backing-dev: Handle class_create() failure
  Block: Fix block/elevator.c elevator_get() off-by-one error
  drbd: lc_element_by_index() never returns NULL
  cciss: unlock on error path
  cfq-iosched: Do not merge queues of BE and IDLE classes
  cfq-iosched: Add additional blktrace log messages in CFQ for easier debugging
  i2o: Remove the dangerous kobj_to_i2o_device macro
  block: remove 16 bytes of padding from struct request on 64bits
  cfq-iosched: fix a kbuild regression
  block: make CONFIG_BLK_CGROUP visible
  Remove GENHD_FL_DRIVERFS
  block: Export max number of segments and max segment size in sysfs
  block: Finalize conversion of block limits functions
  block: Fix overrun in lcm() and move it to lib
  vfs: improve writeback_inodes_wb()
  paride: fix off-by-one test
  drbd: fix al-to-on-disk-bitmap for 4k logical_block_size
  ...

9 years agoMerge branch 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 9 Apr 2010 18:50:01 +0000]
Merge branch 'drm-linus' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (29 commits)
  drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers
  drm/nv50: implement gpio set/get routines
  drm/nv50: parse/use some more de-magiced parts of gpio table entries
  drm/nouveau: store raw gpio table entry in bios gpio structs
  drm/nv40: Init some tiling-related PGRAPH state.
  drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.
  drm/nv50: another dodgy DP hack
  drm/nv50: punt hotplug irq handling out to workqueue
  drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders
  drm/nv50: Allow using the NVA3 new compute class.
  drm/nv50: cleanup properly if PDISPLAY init fails
  drm/nouveau: fixup the init failure paths some more
  drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark
  drm/nv40: add LVDS table quirk for Dell Latitude D620
  drm/nv40: rework lvds table parsing
  drm/nouveau: detect vram amount once, and save the value
  drm/nouveau: remove some unused members from drm_nouveau_private
  drm/nouveau: Make use of TTM busy_placements.
  drm/nv50: add more 0x100c80 flushy magic
  drm/nv50: fix fbcon when framebuffer above 4GiB mark
  ...

9 years agoradix_tree_tag_get() is not as safe as the docs make out [ver #2]
David Howells [Tue, 6 Apr 2010 21:36:20 +0000]
radix_tree_tag_get() is not as safe as the docs make out [ver #2]

radix_tree_tag_get() is not safe to use concurrently with radix_tree_tag_set()
or radix_tree_tag_clear().  The problem is that the double tag_get() in
radix_tree_tag_get():

if (!tag_get(node, tag, offset))
saw_unset_tag = 1;
if (height == 1) {
int ret = tag_get(node, tag, offset);

may see the value change due to the action of set/clear.  RCU is no protection
against this as no pointers are being changed, no nodes are being replaced
according to a COW protocol - set/clear alter the node directly.

The documentation in linux/radix-tree.h, however, says that
radix_tree_tag_get() is an exception to the rule that "any function modifying
the tree or tags (...) must exclude other modifications, and exclude any
functions reading the tree".

The problem is that the next statement in radix_tree_tag_get() checks that the
tag doesn't vary over time:

BUG_ON(ret && saw_unset_tag);

This has been seen happening in FS-Cache:

https://www.redhat.com/archives/linux-cachefs/2010-April/msg00013.html

To this end, remove the BUG_ON() from radix_tree_tag_get() and note in various
comments that the value of the tag may change whilst the RCU read lock is held,
and thus that the return value of radix_tree_tag_get() may not be relied upon
unless radix_tree_tag_set/clear() and radix_tree_delete() are excluded from
running concurrently with it.

Reported-by: Romain DEGEZ <romain.degez@smartjog.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoslub: Fix kmem_ptr_validate() for non-kernel pointers
Pekka Enberg [Wed, 7 Apr 2010 16:23:41 +0000]
slub: Fix kmem_ptr_validate() for non-kernel pointers

As suggested by Linus, fix up kmem_ptr_validate() to handle non-kernel pointers
more graciously. The patch changes kmem_ptr_validate() to use the newly
introduced kern_ptr_validate() helper to check that a pointer is a valid kernel
pointer before we attempt to convert it into a 'struct page'.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <cl@linux-foundation.org>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoslab: Generify kernel pointer validation
Pekka Enberg [Wed, 7 Apr 2010 16:23:40 +0000]
slab: Generify kernel pointer validation

As suggested by Linus, introduce a kern_ptr_validate() helper that does some
sanity checks to make sure a pointer is a valid kernel pointer.  This is a
preparational step for fixing SLUB kmem_ptr_validate().

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Nick Piggin <npiggin@suse.de>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoRevert "memory-hotplug: add 0x prefix to HEX block_size_bytes"
Linus Torvalds [Fri, 9 Apr 2010 17:05:33 +0000]
Revert "memory-hotplug: add 0x prefix to HEX block_size_bytes"

This reverts commit ba168fc37dea145deeb8fa9e7e71c748d2e00d74.

It changes user-visible sysfs interfaces, and breaks some existing user
space applications which apparently rely on the fact that the output
does not contain the "0x" prefix.

Requested-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

9 years agoMerge branches 'cma', 'misc', 'mlx4' and 'nes' into for-linus
Roland Dreier [Fri, 9 Apr 2010 16:14:21 +0000]
Merge branches 'cma', 'misc', 'mlx4' and 'nes' into for-linus

9 years agoARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms
Russell King [Fri, 9 Apr 2010 14:00:11 +0000]
ARM: Fix ioremap_cached()/ioremap_wc() for SMP platforms

Write combining/cached device mappings are not setting the shared bit,
which could potentially cause problems on SMP systems since the cache
lines won't participate in the cache coherency protocol.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

9 years ago[S390] Update default configuration.
Martin Schwidefsky [Fri, 9 Apr 2010 11:43:04 +0000]
[S390] Update default configuration.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] nss: add missing .previous statement to asm function
Heiko Carstens [Fri, 9 Apr 2010 11:43:03 +0000]
[S390] nss: add missing .previous statement to asm function

The savesys_ipl_nss asm function is put into the .init.text section
however it is missing a ".previous" section which would restore the
previous section.
Luckily all functions in early.c are init functions so it doesn't
matter currently.

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] increase default size of vmalloc area
Martin Schwidefsky [Fri, 9 Apr 2010 11:43:02 +0000]
[S390] increase default size of vmalloc area

The default size of the vmalloc area is currently 1 GB. The memory resource
controller uses about 10 MB of vmalloc space per gigabyte of memory. That
turns a system with more than ~100 GB memory unbootable with the default
vmalloc size. It costs us nothing to increase the default size to some
more adequate value, e.g. 128 GB.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] s390: disable change bit override
Christian Borntraeger [Fri, 9 Apr 2010 11:43:01 +0000]
[S390] s390: disable change bit override

commit 6a985c6194017de2c062916ad1cd00dee0302c40
([S390] s390: use change recording override for kernel mapping)
deactivated the change bit recording for the kernel mapping to
improve the performance. This works most of the time, but there
are cases (e.g. kernel runs in home space, futex atomic compare xcmg)
where we modify user memory with the kernel mapping instead of the
user mapping.
Instead of fixing these cases, this patch just deactivates change bit
override to avoid future problems with other kernel code that might
use the kernel mapping for user memory.

CC: stable@kernel.org
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] fix io_return critical section cleanup
Martin Schwidefsky [Fri, 9 Apr 2010 11:43:00 +0000]
[S390] fix io_return critical section cleanup

If a machine check interrupts the io interrupt handler on one of the
instructions between io_return and io_leave the critical section
cleanup code will move the return psw to io_work_loop. By doing that
the switch from the asynchronous interrupt stack to the process stack
is skipped. If e.g. TIF_NEED_RESCHED is set things break because
the scheduler is called with the asynchronous interrupts stack.
Moving the psw back to io_return instead fixes the problem.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] sclp_async: potential buffer overflow
Dan Carpenter [Fri, 9 Apr 2010 11:42:59 +0000]
[S390] sclp_async: potential buffer overflow

"len" hasn't been properly range checked so we shouldn't use it as an
array offset.  This can only be written to by root but it would still be
annoying to accidentally write more than 3 characters and corrupt your
memory.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years ago[S390] arch/s390/kernel: Add missing unlock
Julia Lawall [Fri, 9 Apr 2010 11:42:58 +0000]
[S390] arch/s390/kernel: Add missing unlock

In the default case the lock is not unlocked.  The return is
converted to a goto, to share the unlock at the end of the function.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@r exists@
expression E1;
identifier f;
@@

f (...) { <+...
* spin_lock_irq (E1,...);
... when != E1
* return ...;
...+> }
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

9 years agoARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock
Anders Larsen [Thu, 8 Apr 2010 10:48:16 +0000]
ARM: 6043/1: AT91 slow-clock resume: Don't wait for a disabled PLL to lock

at91 slow-clock resume: Don't wait for a disabled PLL to lock.

We run into this problem with the PLLB on the at91: ohci-at91 disables
the PLLB when going to suspend. The slowclock code however tries to do
the same: It saves the PLLB register value and when restoring the value
during resume, it waits for the PLLB to lock again. However the PLL will
never lock and the loop would run into its timeout because the slowclock
code just stored and restored an empty register.
This fixes the problem by only restoring PLLA/PLLB when they were enabled
at suspend time.

Cc: Andrew Victor <avictor.za@gmail.com>
Signed-off-by: Anders Larsen <al@alarsen.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

9 years agocfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch
Divyesh Shah [Fri, 9 Apr 2010 07:29:57 +0000]
cfq-iosched: Fix the incorrect timeslice accounting with forced_dispatch

When CFQ dispatches requests forcefully due to a barrier or changing iosched,
it runs through all cfqq's dispatching requests and then expires each queue.
However, it does not activate a cfqq before flushing its IOs resulting in
using stale values for computing slice_used.
This patch fixes it by calling activate queue before flushing reuqests from
each queue.

This is useful mostly for barrier requests because when the iosched is changing
it really doesnt matter if we have incorrect accounting since we're going to
break down all structures anyway.

We also now expire the current timeslice before moving on with the dispatch
to accurately account slice used for that cfqq.

Signed-off-by: Divyesh Shah<dpshah@google.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

9 years agoMerge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus
Dave Airlie [Fri, 9 Apr 2010 04:27:51 +0000]
Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus

* 'nouveau/for-airlied' of ../drm-nouveau-next: (21 commits)
  drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers
  drm/nv50: implement gpio set/get routines
  drm/nv50: parse/use some more de-magiced parts of gpio table entries
  drm/nouveau: store raw gpio table entry in bios gpio structs
  drm/nv40: Init some tiling-related PGRAPH state.
  drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.
  drm/nv50: another dodgy DP hack
  drm/nv50: punt hotplug irq handling out to workqueue
  drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders
  drm/nv50: Allow using the NVA3 new compute class.
  drm/nv50: cleanup properly if PDISPLAY init fails
  drm/nouveau: fixup the init failure paths some more
  drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark
  drm/nv40: add LVDS table quirk for Dell Latitude D620
  drm/nv40: rework lvds table parsing
  drm/nouveau: detect vram amount once, and save the value
  drm/nouveau: remove some unused members from drm_nouveau_private
  drm/nouveau: Make use of TTM busy_placements.
  drm/nv50: add more 0x100c80 flushy magic
  drm/nv50: fix fbcon when framebuffer above 4GiB mark
  ...

9 years agodrm/nouveau: bail out of auxch transaction if we repeatedly recieve defers
Ben Skeggs [Mon, 15 Mar 2010 22:45:07 +0000]
drm/nouveau: bail out of auxch transaction if we repeatedly recieve defers

There's one known case where we never stop recieving DEFER, and loop here
forever.  Lets not do that..

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: implement gpio set/get routines
Ben Skeggs [Wed, 7 Apr 2010 02:57:35 +0000]
drm/nv50: implement gpio set/get routines

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: parse/use some more de-magiced parts of gpio table entries
Ben Skeggs [Wed, 7 Apr 2010 02:05:32 +0000]
drm/nv50: parse/use some more de-magiced parts of gpio table entries

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nouveau: store raw gpio table entry in bios gpio structs
Ben Skeggs [Wed, 7 Apr 2010 02:00:14 +0000]
drm/nouveau: store raw gpio table entry in bios gpio structs

And use our own version of the GPIO table for the INIT_GPIO opcode.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv40: Init some tiling-related PGRAPH state.
Francisco Jerez [Tue, 6 Apr 2010 19:11:58 +0000]
drm/nv40: Init some tiling-related PGRAPH state.

Fixes garbled 3D on an nv46 card.

Reported-by: Francesco Marella <francesco.marella@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: Add NVA3 support in ctxprog/ctxvals generator.
Marcin Kościelnicki [Fri, 2 Apr 2010 10:28:18 +0000]
drm/nv50: Add NVA3 support in ctxprog/ctxvals generator.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: another dodgy DP hack
Ben Skeggs [Tue, 30 Mar 2010 06:01:41 +0000]
drm/nv50: another dodgy DP hack

Allows *some* DP cards to keep working in some corner cases that most
people shouldn't hit.  I hit it all the time with development, so this
can stay for now.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: punt hotplug irq handling out to workqueue
Ben Skeggs [Tue, 30 Mar 2010 05:14:41 +0000]
drm/nv50: punt hotplug irq handling out to workqueue

On DP outputs we'll likely end up running vbios init tables here, which
may sleep.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders
Ben Skeggs [Mon, 29 Mar 2010 00:06:09 +0000]
drm/nv50: preserve an unknown SOR_MODECTRL value for DP encoders

This value interacts with some registers we don't currently know how to
program properly ourselves.  The default of 5 that we were using matches
what the VBIOS on early DP cards do, but later ones use 6, which would
cause nouveau to program an incorrect mode on these chips.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: Allow using the NVA3 new compute class.
Marcin Kościelnicki [Wed, 24 Mar 2010 13:43:16 +0000]
drm/nv50: Allow using the NVA3 new compute class.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: cleanup properly if PDISPLAY init fails
Ben Skeggs [Thu, 25 Mar 2010 06:01:04 +0000]
drm/nv50: cleanup properly if PDISPLAY init fails

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nouveau: fixup the init failure paths some more
Ben Skeggs [Thu, 25 Mar 2010 06:00:09 +0000]
drm/nouveau: fixup the init failure paths some more

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

9 years agodrm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark
Ben Skeggs [Fri, 19 Mar 2010 02:49:59 +0000]
drm/nv50: fix instmem init on IGPs if stolen mem crosses 4GiB mark

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>