7 years ago[media] V4L: Improve the selection API documentation
Sylwester Nawrocki [Fri, 9 Mar 2012 09:46:28 +0000]
[media] V4L: Improve the selection API documentation

Make the VIDIOC_G/S_SELECTION ioctls documentation more consistent
with the rest of media Docbook, use capital letters where necessary
and correct few minor errors.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] lmedm04 - support for m88rs2000 missing kconfig option
Malcolm Priestley [Thu, 8 Mar 2012 18:41:08 +0000]
[media] lmedm04 - support for m88rs2000 missing kconfig option

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] add blackfin capture bridge driver
Scott Jiang [Thu, 8 Mar 2012 20:44:17 +0000]
[media] add blackfin capture bridge driver

This is a v4l2 bridge driver for Blackfin video capture device, support ppi and eppi interface.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] vs6624: add vs6624 sensor driver
Scott Jiang [Thu, 8 Mar 2012 20:44:16 +0000]
[media] vs6624: add vs6624 sensor driver

This is a v4l2 sensor-level driver for the ST VS6624 camera.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] adv7183: add adv7183 decoder driver
Scott Jiang [Thu, 8 Mar 2012 20:44:15 +0000]
[media] adv7183: add adv7183 decoder driver

This driver is a v4l2 subdevice driver to support Analog Devices ADV7183 SDTV video decoder.

Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] lmedm04 RS2000 Firmware details
Malcolm Priestley [Wed, 7 Mar 2012 21:17:59 +0000]
[media] lmedm04 RS2000 Firmware details

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] lmedm04 ver 1.99 support for m88rs2000 v2
Malcolm Priestley [Wed, 7 Mar 2012 21:08:10 +0000]
[media] lmedm04 ver 1.99 support for m88rs2000 v2

Support for m88rs2000 module.

The driver also attempts to overcome occasional lock problems.

Call backs are now used for read_status, signal level and SNR.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] m88rs2000: Don't fill info.type
Mauro Carvalho Chehab [Mon, 19 Mar 2012 17:53:48 +0000]
[media] m88rs2000: Don't fill info.type

This field is handled internally by the DVB core, with uses the
selected delivery system to fill it, when a DVBv3 call is
handled. So, drivers should not touch on it.

Cc: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] m88rs2000 1.12 v2 DVB-S frontend and tuner module
Malcolm Priestley [Wed, 7 Mar 2012 21:11:03 +0000]
[media] m88rs2000 1.12 v2 DVB-S frontend and tuner module

Support for m88rs2000 chip used in lmedm04 driver.

Note there are still lock problems.

Slow channel change due to the large block of registers sent in set_frontend.

Version 2 differences.
Front end is completely shut down when in sleep mode. This allow user to regain
control of device.
Kaffeine scan problem solved by removing register calls from get_frontend.
Kaffeine seems to call get_frontend when updating signal data. This can happen
in the middle of a tune stalling the driver.
Change calculations to those in the DS3000 driver.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] lmedm04 v1.98 Remove clear halt
Malcolm Priestley [Wed, 7 Mar 2012 21:06:23 +0000]
[media] lmedm04 v1.98 Remove clear halt

These were in the original lme2510 device driver.

Removing them significantly speeds up the driver.

All tuners tested.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dvb: negative value assigned to unsigned int in CDRXD()
Santosh Nayak [Wed, 7 Mar 2012 02:41:03 +0000]
[media] dvb: negative value assigned to unsigned int in CDRXD()

In CDRXD(), Negative number is assigned to unsigned variable
'state->noise_cal.tdCal2.

Members of 'SNoiseCal' should be 'signed short'.

Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib9000: implement error handling for DibAcquireLock
Alexey Khoroshilov [Tue, 6 Mar 2012 20:08:29 +0000]
[media] dib9000: implement error handling for DibAcquireLock

DibAcquireLock() is implemented as mutex_lock_interruptible()
but the driver does not handle unsuccessful locking.
As a result it may lead to unlock of an unheld mutex.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] dib9000: fix explicit lock mismatches
Alexey Khoroshilov [Tue, 6 Mar 2012 20:08:16 +0000]
[media] dib9000: fix explicit lock mismatches

There are several error paths, where &state->platform.risc.mem_mbx_lock
is not unlocked. The patch fixes it.

Found by Linux Driver Verification project (linuxtesting.org).

Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] staging: Fix comments and some typos in staging/media/*
Justin P. Mattock [Mon, 5 Mar 2012 14:49:26 +0000]
[media] staging: Fix comments and some typos in staging/media/*

linux-next:
I like to spend some time reading code, in doing so I have found some
typos in some of the comments.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] as102: set optimal eLNA config values for each device
Gianluca Gennari [Tue, 6 Mar 2012 12:47:46 +0000]
[media] as102: set optimal eLNA config values for each device

Ryley and me tested several eLNA configuration values with both a rooftop
and a portable antenna.

Ryley fuond out that the best value for his Elgato stick is indeed the current
default value 0xC0.

Instead, my stick is not capable of tuning VHF channels with 0xC0. With 0x80,
VHF works but the tuner sensitivity with the portable antenna is poor.
Instead, the value 0xA0 works with VHF and also gives good performance with
both the rooftop and the portable antenna.

So we concluded that devices built on the reference design work best with 0xA0,
while custom designs (Elgato, PCTV) seem to require 0xC0.

I also removed the unused parameter "minor" in struct as102_dev_t.

Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Ryley Angus <rangus@student.unimelb.edu.au>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] as102: add __packed attribute to structs defined inside packed structs
Gianluca Gennari [Tue, 6 Mar 2012 12:47:45 +0000]
[media] as102: add __packed attribute to structs defined inside packed structs

This patch fixes a regression in kernel 3.3 due to this patch:

http://patchwork.linuxtv.org/patch/8332/

That patch changes "#pragma pack(1)" with "__packed" attributes, but it is not
complete. In fact, in the as102 driver there are a lot of structs/unions
defined inside other structs/unions.
When the "__packed" attribute is applied only on the external struct, it will
not affect the internal struct definitions.
So the regression is fixed by specifiying the "__packed" attribute also on the
internal structs.

This patch should go into 3.3, as it fixes a regression introduced in the new
kernel version.

Signed-off-by: Gianluca Gennari <gennarone@gmail.com>
Signed-off-by: Ryley Angus <rangus@student.unimelb.edu.au>
Cc: stable@kernel.org # for v3.3
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] Add CI support to az6007 driver
Jose Alberto Reguero [Sun, 4 Mar 2012 22:22:05 +0000]
[media] Add CI support to az6007 driver

This patch add CI support to az6007 driver.

Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] media, cx231xx: Fix double free on close
Jesper Juhl [Sun, 4 Mar 2012 19:25:04 +0000]
[media] media, cx231xx: Fix double free on close

In cx231xx_v4l2_close() there are two calls to
cx231xx_release_resources(dev) followed by kfree(dev). That is a
problem since cx231xx_release_resources() already kfree()'s its
argument, so we end up doing a double free.

Easily resolved by just removing the redundant kfree() calls after the
calls to cx231xx_release_resources().

I also changed the 'dev = NULL' assignments (which are rather
pointless since 'dev' is about to go out of scope), to 'fh->dev = NULL'
since it looks to me that that is what was actually intended.
And I removed the 'dev = NULL' assignment at the end of
cx231xx_release_resources() since it is pointless.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] lmedm04 ver 1.97 Remove delays required for STV0288
Malcolm Priestley [Fri, 2 Mar 2012 21:19:30 +0000]
[media] lmedm04 ver 1.97 Remove delays required for STV0288

Remove delays added for STV0288 frontend.

This patch significantly speeds up channel change and scan.

It requires patch 10161-STV0288 increase delay between carrier search.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] STV0288 increase delay between carrier search
Malcolm Priestley [Fri, 2 Mar 2012 21:15:41 +0000]
[media] STV0288 increase delay between carrier search

The current delay of 30uS is too short to recover any carrier.

In the lmedm04 driver delays were added to overcome carrier lock
problems. The typical delay was 30mS (2 x 15ms register write
0x2c and read 0x24).

Other drivers that use STV0288 don't appear to have any delay are
likely to have also suffered this problem.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] uvcvideo: uvc_driver.c: use linux/atomic.h
Andrew Morton [Thu, 1 Mar 2012 22:56:29 +0000]
[media] uvcvideo: uvc_driver.c: use linux/atomic.h

There's no known problem here, but this is one of only two non-arch files
in the kernel which use asm/atomic.h instead of linux/atomic.h.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] uvcvideo: Add support for Dell XPS m1530 integrated webcam
Laurent Pinchart [Wed, 2 Nov 2011 16:08:06 +0000]
[media] uvcvideo: Add support for Dell XPS m1530 integrated webcam

The camera requires the PROBE_DEF quirk. Add a corresponding entry in
the device IDs list.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] uvcvideo: Allow userptr IO mode
Javier Martin [Mon, 2 Jan 2012 14:12:23 +0000]
[media] uvcvideo: Allow userptr IO mode

Userptr can be very useful if a UVC camera is requested to use video
buffers allocated by another processing device. So that buffers don't
need to be copied.

Signed-off-by: Javier Martin <javier.martin@vista-silicon.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] uvcvideo: Implement compat_ioctl32 for custom ioctls
Laurent Pinchart [Sun, 18 Dec 2011 23:45:39 +0000]
[media] uvcvideo: Implement compat_ioctl32 for custom ioctls

Support 32-bit/64-bit compatibility for the the UVCIOC_ ioctls.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] uvcvideo: Return -ENOTTY in case of unknown ioctl
Laurent Pinchart [Sun, 18 Dec 2011 23:22:50 +0000]
[media] uvcvideo: Return -ENOTTY in case of unknown ioctl

-EINVAL is the wrong error code in that case, replace it with -ENOTTY.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] v4l: Add custom compat_ioctl32 operation
Laurent Pinchart [Sun, 18 Dec 2011 23:41:19 +0000]
[media] v4l: Add custom compat_ioctl32 operation

Drivers implementing custom ioctls need to handle 32-bit/64-bit
compatibility themselves. Provide them with a way to do so.

To avoid circular module dependencies, merge the v4l2-compat-ioctl32
module into videodev. There is no point in keeping them separate, as the
v4l2_compat_ioctl32() function is required by videodev if CONFIG_COMPAT
is set anyway.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] Two small string fixes in v4l2-ctrls.c
Hans Verkuil [Fri, 2 Mar 2012 07:20:19 +0000]
[media] Two small string fixes in v4l2-ctrls.c

Fix one typo and use 'Microseconds' instead of 'useconds' in the pre-emphasis
descriptions.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years agoMerge tag 'v3.3' into staging/for_v3.4
Mauro Carvalho Chehab [Mon, 19 Mar 2012 16:41:24 +0000]
Merge tag 'v3.3' into staging/for_v3.4

* tag 'v3.3': (1646 commits)
  Linux 3.3
  Don't limit non-nested epoll paths
  netfilter: ctnetlink: fix race between delete and timeout expiration
  ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
  nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
  nilfs2: clamp ns_r_segments_percentage to [1, 99]
  afs: Remote abort can cause BUG in rxrpc code
  afs: Read of file returns EBADMSG
  C6X: remove dead code from entry.S
  wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
  net/hyperv: fix erroneous NETDEV_TX_BUSY use
  net/usbnet: reserve headroom on rx skbs
  bnx2x: fix memory leak in bnx2x_init_firmware()
  bnx2x: fix a crash on corrupt firmware file
  sch_sfq: revert dont put new flow at the end of flows
  ipv6: fix icmp6_dst_alloc()
  MAINTAINERS: Add Serge as maintainer of capabilities
  drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
  MAINTAINERS: add entry for exynos mipi display drivers
  MAINTAINERS: fix link to Gustavo Padovans tree
  ...

7 years ago[media] radio-sf16fmr2: fix session mismatches
Mauro Carvalho Chehab [Mon, 19 Mar 2012 16:32:37 +0000]
[media] radio-sf16fmr2: fix session mismatches

WARNING: drivers/media/radio/built-in.o(.data+0x284): Section mismatch in reference from the variable fmr2_driver to the function .init.text:fmr2_probe()
The variable fmr2_driver references
the function __init fmr2_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

WARNING: drivers/media/built-in.o(.data+0x48200): Section mismatch in reference from the variable fmr2_driver to the function .init.text:fmr2_probe()
The variable fmr2_driver references
the function __init fmr2_probe()
If the reference is valid then annotate the
variable with __init* or __refdata (see linux/init.h) or name the variable:
*_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] V4L2 Spec: return -EINVAL on unsupported wrap_around value
Hans Verkuil [Mon, 27 Feb 2012 08:36:38 +0000]
[media] V4L2 Spec: return -EINVAL on unsupported wrap_around value

This is a small extension to the S_HW_FREQ_SEEK ioctl: if the wrap_around
value is not support by the hardware, then -EINVAL is returned.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] radio-maxiradio: use the tea575x framework
Hans Verkuil [Sun, 5 Feb 2012 12:53:17 +0000]
[media] radio-maxiradio: use the tea575x framework

This card is based on the tea575x receiver. Use the tea575x-tuner framework
instead of reinventing the wheel.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] tea575x: fix HW seek
Hans Verkuil [Mon, 27 Feb 2012 08:31:58 +0000]
[media] tea575x: fix HW seek

Fix HW seek in TEA575x to work properly:
- a delay must be present after search start and before first register read
  or the seek does weird things
- when the search stops, the new frequency is not available immediately, we
  must wait until it appears in the register (fortunately, we can clear the
  frequency bits when starting the search as it starts at the frequency
  currently set, not from the value written)
- sometimes, seek remains on the current frequency (or moves only a little),
  so repeat it until it moves by at least 50 kHz

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] tea575x-tuner: update to latest V4L2 framework requirements
Hans Verkuil [Mon, 27 Feb 2012 08:30:13 +0000]
[media] tea575x-tuner: update to latest V4L2 framework requirements

The tea575x-tuner module has been updated to use the latest V4L2 framework
functionality. This also required changes in the drivers that rely on it.

The tea575x changes are:

- The drivers must provide a v4l2_device struct to the tea module.
- The radio_nr module parameter must be part of the actual radio driver,
  and not of the tea module.
- Changed the frequency range to the normal 76-108 MHz range instead of
  50-150.
- Add hardware frequency seek support.
- Fix broken rxsubchans/audmode handling.
- The application can now select between stereo and mono.
- Support polling for control events.
- Add V4L2 priority handling.

And radio-sf16fmr2.c now uses the isa bus kernel framework.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] Add missing slab.h to fix linux-next compile errors
Hans Verkuil [Wed, 29 Feb 2012 08:50:27 +0000]
[media] Add missing slab.h to fix linux-next compile errors

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] stb0899: fixed reading of IF_AGC_GAIN register
Andreas Regel [Tue, 28 Feb 2012 17:40:44 +0000]
[media] stb0899: fixed reading of IF_AGC_GAIN register

When reading IF_AGC_GAIN register a wrong value for the base address
register was used (STB0899_DEMOD instead of STB0899_S2DEMOD). That
lead to a wrong signal strength value on DVB-S2 transponders.

Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Acked-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] stb0899: set FE_HAS_SIGNAL flag in read_status
Andreas Regel [Tue, 28 Feb 2012 17:40:40 +0000]
[media] stb0899: set FE_HAS_SIGNAL flag in read_status

In stb0899_read_status the FE_HAS_SIGNAL flag was not set in case of a
successful carrier lock. This change fixes that.

Signed-off-by: Andreas Regel <andreas.regel@gmx.de>
Acked-by: Klaus Schmidinger <Klaus.Schmidinger@tvdr.de>
Cc: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years ago[media] tda10071: fix the delivery system
Antti Palosaari [Mon, 12 Mar 2012 21:21:20 +0000]
[media] tda10071: fix the delivery system

Commit b2a29b578d9c21b2e5c88020f830d3c42115c51d sets accidentally
supported delivery systems as DVB-T/T2 whilst it should be
DVB-S/S2. Due to that frontend cannot be used at all.

Reported-by: Jiří Zelenka <klacek@bubakov.net>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Cc: stable@kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

7 years agoLinux 3.3
Linus Torvalds [Sun, 18 Mar 2012 23:15:34 +0000]
Linux 3.3

7 years agoDon't limit non-nested epoll paths
Jason Baron [Fri, 16 Mar 2012 20:34:03 +0000]
Don't limit non-nested epoll paths

Commit 28d82dc1c4ed ("epoll: limit paths") that I did to limit the
number of possible wakeup paths in epoll is causing a few applications
to longer work (dovecot for one).

The original patch is really about limiting the amount of epoll nesting
(since epoll fds can be attached to other fds). Thus, we probably can
allow an unlimited number of paths of depth 1. My current patch limits
it at 1000. And enforce the limits on paths that have a greater depth.

This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Sun, 18 Mar 2012 02:22:24 +0000]
Merge git://git./linux/kernel/git/davem/net

Pull networking changes from David Miller:
 "1) icmp6_dst_alloc() returns NULL instead of ERR_PTR() leading to
     crashes, particularly during shutdown.  Reported by Dave Jones and
     fixed by Eric Dumazet.

  2) hyperv and wimax/i2400m return NETDEV_TX_BUSY when they have
     already freed the SKB, which causes crashes as to the caller this
     means requeue the packet.  Fixes from Eric Dumazet.

  3) usbnet driver doesn't allocate the right amount of headroom on
     fresh RX SKBs, fix from Eric Dumazet.

  4) Fix regression in ip6_mc_find_dev_rcu(), as an RCU lookup it
     abolutely should not take a reference to 'dev', this leads to
     leaks.  Fix from RonQing Li.

  5) Fix netfilter ctnetlink race between delete and timeout expiration.
     From Pablo Neira Ayuso.

  6) Revert SFQ change which causes regressions, specifically queueing
     to tail can lead to unavoidable flow starvation.  From Eric
     Dumazet.

  7) Fix a memory leak and a crash on corrupt firmware files in bnx2x,
     from Michal Schmidt."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: ctnetlink: fix race between delete and timeout expiration
  ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
  wimax/i2400m: fix erroneous NETDEV_TX_BUSY use
  net/hyperv: fix erroneous NETDEV_TX_BUSY use
  net/usbnet: reserve headroom on rx skbs
  bnx2x: fix memory leak in bnx2x_init_firmware()
  bnx2x: fix a crash on corrupt firmware file
  sch_sfq: revert dont put new flow at the end of flows
  ipv6: fix icmp6_dst_alloc()

7 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Sat, 17 Mar 2012 16:54:16 +0000]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools, x86: Build perf on older user-space as well
  perf tools: Use scnprintf where applicable
  perf tools: Incorrect use of snprintf results in SEGV

7 years agonetfilter: ctnetlink: fix race between delete and timeout expiration
Pablo Neira Ayuso [Fri, 16 Mar 2012 02:00:34 +0000]
netfilter: ctnetlink: fix race between delete and timeout expiration

Kerin Millar reported hardlockups while running `conntrackd -c'
in a busy firewall. That system (with several processors) was
acting as backup in a primary-backup setup.

After several tries, I found a race condition between the deletion
operation of ctnetlink and timeout expiration. This patch fixes
this problem.

Tested-by: Kerin Millar <kerframil@gmail.com>
Reported-by: Kerin Millar <kerframil@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.
RongQing.Li [Thu, 15 Mar 2012 22:54:14 +0000]
ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu.

ip6_mc_find_dev_rcu() is called with rcu_read_lock(), so don't
need to dev_hold().
With dev_hold(), not corresponding dev_put(), will lead to leak.

[ bug introduced in 96b52e61be1 (ipv6: mcast: RCU conversions) ]

Signed-off-by: RongQing.Li <roy.qing.li@gmail.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'akpm' (more patches from Andrew)
Linus Torvalds [Sat, 17 Mar 2012 00:14:55 +0000]
Merge branch 'akpm' (more patches from Andrew)

Merge some more email patches from Andrew Morton:
 "A couple of nilfs fixes"

* emailed from Andrew Morton <akpm@linux-foundation.org>:
  nilfs2: fix NULL pointer dereference in nilfs_load_super_block()
  nilfs2: clamp ns_r_segments_percentage to [1, 99]

7 years agonilfs2: fix NULL pointer dereference in nilfs_load_super_block()
Ryusuke Konishi [Sat, 17 Mar 2012 00:08:39 +0000]
nilfs2: fix NULL pointer dereference in nilfs_load_super_block()

According to the report from Slicky Devil, nilfs caused kernel oops at
nilfs_load_super_block function during mount after he shrank the
partition without resizing the filesystem:

 BUG: unable to handle kernel NULL pointer dereference at 00000048
 IP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2]
 *pde = 00000000
 Oops: 0000 [#1] PREEMPT SMP
 ...
 Call Trace:
  [<d0d7a87b>] init_nilfs+0x4b/0x2e0 [nilfs2]
  [<d0d6f707>] nilfs_mount+0x447/0x5b0 [nilfs2]
  [<c0226636>] mount_fs+0x36/0x180
  [<c023d961>] vfs_kern_mount+0x51/0xa0
  [<c023ddae>] do_kern_mount+0x3e/0xe0
  [<c023f189>] do_mount+0x169/0x700
  [<c023fa9b>] sys_mount+0x6b/0xa0
  [<c04abd1f>] sysenter_do_call+0x12/0x28
 Code: 53 18 8b 43 20 89 4b 18 8b 4b 24 89 53 1c 89 43 24 89 4b 20 8b 43
 20 c7 43 2c 00 00 00 00 23 75 e8 8b 50 68 89 53 28 8b 54 b3 20 <8b> 72
 48 8b 7a 4c 8b 55 08 89 b3 84 00 00 00 89 bb 88 00 00 00
 EIP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] SS:ESP 0068:ca9bbdcc
 CR2: 0000000000000048

This turned out due to a defect in an error path which runs if the
calculated location of the secondary super block was invalid.

This patch fixes it and eliminates the reported oops.

Reported-by: Slicky Devil <slicky.dvl@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Slicky Devil <slicky.dvl@gmail.com>
Cc: <stable@vger.kernel.org> [2.6.30+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agonilfs2: clamp ns_r_segments_percentage to [1, 99]
Haogang Chen [Sat, 17 Mar 2012 00:08:38 +0000]
nilfs2: clamp ns_r_segments_percentage to [1, 99]

ns_r_segments_percentage is read from the disk.  Bogus or malicious
value could cause integer overflow and malfunction due to meaningless
disk usage calculation.  This patch reports error when mounting such
bogus volumes.

Signed-off-by: Haogang Chen <haogangchen@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Sat, 17 Mar 2012 00:04:02 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/linux-security

Pull maintainer update from James Morris:
 "Please pull this patch which adds Serge as maintainer of the
  capabilities code, as discussed on lwn and the lsm list.

  New capabilities must be signed off by the maintainer, and new uses of
  any capabilities should at be cc'd to the maintainer."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  MAINTAINERS: Add Serge as maintainer of capabilities

7 years agoMerge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming
Linus Torvalds [Sat, 17 Mar 2012 00:03:15 +0000]
Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming

Pull c6x bugfix from Mark Salter:
 "Remove dead code from entry.S which causes a build failure when using
  a newer assembler (v2.22 complains about it, v2.20 ignores it)."

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  C6X: remove dead code from entry.S

7 years agoafs: Remote abort can cause BUG in rxrpc code
Anton Blanchard [Fri, 16 Mar 2012 10:28:19 +0000]
afs: Remote abort can cause BUG in rxrpc code

When writing files to afs I sometimes hit a BUG:

kernel BUG at fs/afs/rxrpc.c:179!

With a backtrace of:

afs_free_call
afs_make_call
afs_fs_store_data
afs_vnode_store_data
afs_write_back_from_locked_page
afs_writepages_region
afs_writepages

The cause is:

ASSERT(skb_queue_empty(&call->rx_queue));

Looking at a tcpdump of the session the abort happens because we
are exceeding our disk quota:

rx abort fs reply store-data error diskquota exceeded (32)

So the abort error is valid. We hit the BUG because we haven't
freed all the resources for the call.

By freeing any skbs in call->rx_queue before calling afs_free_call
we avoid hitting leaking memory and avoid hitting the BUG.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoafs: Read of file returns EBADMSG
Anton Blanchard [Fri, 16 Mar 2012 10:28:07 +0000]
afs: Read of file returns EBADMSG

A read of a large file on an afs mount failed:

# cat junk.file > /dev/null
cat: junk.file: Bad message

Looking at the trace, call->offset wrapped since it is only an
unsigned short. In afs_extract_data:

        _enter("{%u},{%zu},%d,,%zu", call->offset, len, last, count);
...

        if (call->offset < count) {
                if (last) {
                        _leave(" = -EBADMSG [%d < %zu]", call->offset, count);
                        return -EBADMSG;
                }

Which matches the trace:

[cat   ] ==> afs_extract_data({65132},{524},1,,65536)
[cat   ] <== afs_extract_data() = -EBADMSG [0 < 65536]

call->offset went from 65132 to 0. Fix this by making call->offset an
unsigned int.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoC6X: remove dead code from entry.S
Mark Salter [Fri, 16 Mar 2012 13:27:57 +0000]
C6X: remove dead code from entry.S

The ENDPROC() on sys_fadvise64_c6x() in arch/c6x/kernel/entry.S is
outside of the conditional block with the matching ENTRY() macro. This
leads a newer (v2.22 vs. v2.20) assembler to complain:

  /tmp/ccGZBaPT.s: Assembler messages:
  /tmp/ccGZBaPT.s: Error: .size expression for sys_fadvise64_c6x does not evaluate to a constant

The conditional block became dead code when c6x switched to generic
unistd.h and should be removed along with the offending ENDPROC().

Signed-off-by: Mark Salter <msalter@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>

7 years agowimax/i2400m: fix erroneous NETDEV_TX_BUSY use
Eric Dumazet [Wed, 14 Mar 2012 09:21:44 +0000]
wimax/i2400m: fix erroneous NETDEV_TX_BUSY use

A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY,
since caller is going to reuse freed skb.

In fact netif_tx_stop_queue() / netif_stop_queue() is needed before
returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop.

In case of memory allocation error, only safe way is to drop the packet
and return NETDEV_TX_OK

Also increments tx_dropped counter

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/hyperv: fix erroneous NETDEV_TX_BUSY use
Eric Dumazet [Wed, 14 Mar 2012 08:53:34 +0000]
net/hyperv: fix erroneous NETDEV_TX_BUSY use

A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY,
since caller is going to reuse freed skb.

This is mostly a revert of commit bf769375c (staging: hv: fix the return
status of netvsc_start_xmit())

In fact netif_tx_stop_queue() / netif_stop_queue() is needed before
returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop.

In case of memory allocation error, only safe way is to drop the packet
and return NETDEV_TX_OK

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet/usbnet: reserve headroom on rx skbs
Eric Dumazet [Wed, 14 Mar 2012 06:56:25 +0000]
net/usbnet: reserve headroom on rx skbs

network drivers should reserve some headroom on incoming skbs so that we
dont need expensive reallocations, eg forwarding packets in tunnels.

This NET_SKB_PAD padding is done in various helpers, like
__netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and
NET_IP_ALIGN magic.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: fix memory leak in bnx2x_init_firmware()
Michal Schmidt [Thu, 15 Mar 2012 14:08:29 +0000]
bnx2x: fix memory leak in bnx2x_init_firmware()

When cycling the interface down and up, bnx2x_init_firmware() knows that
the firmware is already loaded, but nevertheless it allocates certain
arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old
arrays are leaked.

Fix the leaks by returning early if the firmware was already loaded.
Because if the firmware is loaded, so are the arrays.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: fix a crash on corrupt firmware file
Michal Schmidt [Thu, 15 Mar 2012 14:08:28 +0000]
bnx2x: fix a crash on corrupt firmware file

If the requested firmware is deemed corrupt and then released, reset the
pointer to NULL in order to avoid double-freeing it in
bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware().

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agosch_sfq: revert dont put new flow at the end of flows
Eric Dumazet [Tue, 13 Mar 2012 18:04:25 +0000]
sch_sfq: revert dont put new flow at the end of flows

This reverts commit d47a0ac7b6 (sch_sfq: dont put new flow at the end of
flows)

As Jesper found out, patch sounded great but has bad side effects.

In stress situation, pushing new flows in front of the queue can prevent
old flows doing any progress. Packets can stay in SFQ queue for
unlimited amount of time.

It's possible to add heuristics to limit this problem, but this would
add complexity outside of SFQ scope.

A more sensible answer to Dave Taht concerns (who reported the issued I
tried to solve in original commit) is probably to use a qdisc hierarchy
so that high prio packets dont enter a potentially crowded SFQ qdisc.

Reported-by: Jesper Dangaard Brouer <jdb@comx.dk>
Cc: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoipv6: fix icmp6_dst_alloc()
Eric Dumazet [Wed, 14 Mar 2012 21:13:11 +0000]
ipv6: fix icmp6_dst_alloc()

commit 87a115783 ( ipv6: Move xfrm_lookup() call down into
icmp6_dst_alloc().) forgot to convert one error path, leading
to crashes in mld_sendpack()

Many thanks to Dave Jones for providing a very complete bug report.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMAINTAINERS: Add Serge as maintainer of capabilities
James Morris [Fri, 16 Mar 2012 01:05:48 +0000]
MAINTAINERS: Add Serge as maintainer of capabilities

Add Serge as maintainer of capabilities, per suggestion on LWN:
http://lwn.net/Articles/486306/

Signed-off-by: James Morris <james.l.morris@oracle.com>

7 years agoMerge branch 'akpm' (Andrew's patch-bomb)
Linus Torvalds [Fri, 16 Mar 2012 00:16:22 +0000]
Merge branch 'akpm' (Andrew's patch-bomb)

Merge patches from Andrew Morton:
 "Nine patches - some bug fixes and some MAINTAINERS fiddling."

* emailed from Andrew Morton <akpm@linux-foundation.org>:
  drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
  MAINTAINERS: add entry for exynos mipi display drivers
  MAINTAINERS: fix link to Gustavo Padovans tree
  MAINTAINERS: add Johan to Bluetooth maintainers
  MAINTAINERS: Gustavo has moved
  prctl: use CAP_SYS_RESOURCE for PR_SET_MM option
  rapidio/tsi721: fix bug in register offset definitions
  MAINTAINERS: update ST's Mailing list for SPEAr
  memcg: free mem_cgroup by RCU to fix oops

7 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Fri, 16 Mar 2012 00:14:35 +0000]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

Pull i2c subsystem fixes from Jean Delvare.

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  i2c-algo-bit: Fix spurious SCL timeouts under heavy load
  i2c-core: Comment says "transmitted" but means "received"

7 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Fri, 16 Mar 2012 00:13:39 +0000]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck.

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (zl6100) Enable interval between chip accesses for all chips
  hwmon: (w83627ehf) Describe undocumented pwm attributes
  hwmon: (w83627ehf) Fix temp2 source for W83627UHG
  hwmon: (w83627ehf) Fix memory leak in probe function
  hwmon: (w83627ehf) Fix writing into fan_stop_time for NCT6775F/NCT6776F

7 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 16 Mar 2012 00:07:25 +0000]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm exynos/intel updates from Dave Airlie:
 "Two minor updates from Jesse for Intel SNB fixes, and a few fixes from
  Samsung for exynos.  The pull req has Alan's commit in it since Intel
  based their tree on my tree at that time, but it all seems fine wrt
  merging."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm exynos: use drm_fb_helper_set_par directly
  drm/exynos: Fix fb_videomode <-> drm_mode_modeinfo conversion
  drm/exynos: fix runtime_pm fimd device state on probe
  drm/exynos: use correct 'exynos-drm' name for platform device
  drm/i915: support 32 bit BGR formats in sprite planes
  drm/i915: fix color order for BGR formats on SNB
  drm/gma500: Fix Cedarview boot failures in 3.3-rc

7 years agoMerge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Fri, 16 Mar 2012 00:06:05 +0000]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "For 4 fixes for 3.3 (all trivial):
       - uvc video driver: fixes a division by zero;
       - davinci: add module.h to fix compilation;
       - smsusb: fix the delivery system setting;
       - smsdvb: the get_frontend implementation there is broken.

  The smsdvb patch has 127 lines, but it is trivial: instead of
  returning a cache of the set_frontend (with is wrong, as it doesn't
  have the updated values for the data, and the implementation there is
  buggy), it copies the information of the detected DVB parameters from
  the smsdvb private structures into the corresponding DVBv5 struct
  fields."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] smsdvb: fix get_frontend
  [media] smsusb: fix the default delivery system setting
  [media] media: davinci: added module.h to resolve unresolved macros
  [media] [FOR,v3.3] uvcvideo: Avoid division by 0 in timestamp calculation

7 years agoMerge branch '3.3-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target...
Linus Torvalds [Fri, 16 Mar 2012 00:04:56 +0000]
Merge branch '3.3-urgent' of git://git./linux/kernel/git/nab/target-pending

Pull target fixes from Nicholas Bellinger:
 "This series addresses two recently reported regression bugs related to
  legacy SCSI reservation usage in target core, and iscsi-target
  reservation conflict handling.

  The second patch in particular addresses possible data-corruption with
  SCSI reservations that is specific to iscsi-target fabric LUNs with
  multiple client writers.  Both patches need to go into v3.2 stable
  ASAP, and the branch based on the last target-pending/3.3-rc-fixes
  HEAD.

  Again, thanks to Martin Svec for his help to identify and address this
  regression bug with iscsi-target."

* '3.3-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  iscsi-target: Fix reservation conflict -EBUSY response handling bug
  target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASE

7 years agodrivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode
Dan Carpenter [Thu, 15 Mar 2012 22:17:12 +0000]
drivers/video/backlight/s6e63m0.c: fix corruption storing gamma mode

strict_strtoul() writes a long but ->gamma_mode only has space to store an
int, so on 64 bit systems we end up scribbling over ->gamma_table_count as
well.  I've changed it to use kstrtouint() instead.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: add entry for exynos mipi display drivers
Donghwa Lee [Thu, 15 Mar 2012 22:17:11 +0000]
MAINTAINERS: add entry for exynos mipi display drivers

I'd like to add Inki Dae, Donghwa Lee and Kyungmin Park as maintainers
who developers for exynos mipi display drivers for
video/driver/exynos/exynos_mipi* and include/video/exynos_mipi*.

Signed-off-by: Donghwa Lee <dh09.lee@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: fix link to Gustavo Padovans tree
Johan Hedberg [Thu, 15 Mar 2012 22:17:11 +0000]
MAINTAINERS: fix link to Gustavo Padovans tree

Gustavo's tree is called just bluetooth.git and not bluetooth-2.6.git
anymore.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: "Gustavo F. Padovan" <padovan@profusion.mobi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: add Johan to Bluetooth maintainers
Johan Hedberg [Thu, 15 Mar 2012 22:17:11 +0000]
MAINTAINERS: add Johan to Bluetooth maintainers

I've been coordinating Bluetooth patches in my tree for some time and
it's possible I'll do it in the future too, so add myself to the
Bluetooth sections as well as mention my tree there.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: "Gustavo F. Padovan" <padovan@profusion.mobi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: Gustavo has moved
Gustavo Padovan [Thu, 15 Mar 2012 22:17:10 +0000]
MAINTAINERS: Gustavo has moved

This is going to be the primary e-mail for kernel development.

Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoprctl: use CAP_SYS_RESOURCE for PR_SET_MM option
Cyrill Gorcunov [Thu, 15 Mar 2012 22:17:10 +0000]
prctl: use CAP_SYS_RESOURCE for PR_SET_MM option

CAP_SYS_ADMIN is already overloaded left and right, so to have more
fine-grained access control use CAP_SYS_RESOURCE here.

The CAP_SYS_RESOUCE is chosen because this prctl option allows a current
process to adjust some fields of memory map descriptor which rather
represents what the process owns: pointers to code, data, stack
segments, command line, auxiliary vector data and etc.

Suggested-by: Michael Kerrisk <mtk.manpages@gmail.com>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agorapidio/tsi721: fix bug in register offset definitions
Alexandre Bounine [Thu, 15 Mar 2012 22:17:09 +0000]
rapidio/tsi721: fix bug in register offset definitions

Fix indexed register offset definitions that use decimal (wrong) instead
of hexadecimal (correct) notation for indexing multipliers.

Incorrect definitions do not affect Tsi721 driver in its current default
configuration because it uses only IDB queue 0.  Loss of inbound
doorbell functionality should be observed if queue other than 0 is used.

Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Chul Kim <chul.kim@idt.com>
Cc: <stable@vger.kernel.org> [3.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMAINTAINERS: update ST's Mailing list for SPEAr
Viresh Kumar [Thu, 15 Mar 2012 22:17:09 +0000]
MAINTAINERS: update ST's Mailing list for SPEAr

We have created a ST's Mailing list for SPEAr.  This can be accessed
from non-st email ids.  I want people to cc this list, when they have
changes specific to SPEAr.  So, its better to get this updated in
MAINTAINERS file.

linux-arm-kernel@lists.infradead.org is also added for SPEAr.

Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agomemcg: free mem_cgroup by RCU to fix oops
Hugh Dickins [Thu, 15 Mar 2012 22:17:07 +0000]
memcg: free mem_cgroup by RCU to fix oops

After fixing the GPF in mem_cgroup_lru_del_list(), three times one
machine running a similar load (moving and removing memcgs while
swapping) has oopsed in mem_cgroup_zone_nr_lru_pages(), when retrieving
memcg zone numbers for get_scan_count() for shrink_mem_cgroup_zone():
this is where a struct mem_cgroup is first accessed after being chosen
by mem_cgroup_iter().

Just what protects a struct mem_cgroup from being freed, in between
mem_cgroup_iter()'s css_get_next() and its css_tryget()? css_tryget()
fails once css->refcnt is zero with CSS_REMOVED set in flags, yes: but
what if that memory is freed and reused for something else, which sets
"refcnt" non-zero? Hmm, and scope for an indefinite freeze if refcnt is
left at zero but flags are cleared.

It's tempting to move the css_tryget() into css_get_next(), to make it
really "get" the css, but I don't think that actually solves anything:
the same difficulty in moving from css_id found to stable css remains.

But we already have rcu_read_lock() around the two, so it's easily fixed
if __mem_cgroup_free() just uses kfree_rcu() to free mem_cgroup.

However, a big struct mem_cgroup is allocated with vzalloc() instead of
kzalloc(), and we're not allowed to vfree() at interrupt time: there
doesn't appear to be a general vfree_rcu() to help with this, so roll
our own using schedule_work().  The compiler decently removes
vfree_work() and vfree_rcu() when the config doesn't need them.

Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Konstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoi2c-algo-bit: Fix spurious SCL timeouts under heavy load
Ville Syrjala [Thu, 15 Mar 2012 17:11:05 +0000]
i2c-algo-bit: Fix spurious SCL timeouts under heavy load

When the system is under heavy load, there can be a significant delay
between the getscl() and time_after() calls inside sclhi(). That delay
may cause the time_after() check to trigger after SCL has gone high,
causing sclhi() to return -ETIMEDOUT.

To fix the problem, double check that SCL is still low after the
timeout has been reached, before deciding to return -ETIMEDOUT.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoi2c-core: Comment says "transmitted" but means "received"
Wolfram Sang [Thu, 15 Mar 2012 17:11:05 +0000]
i2c-core: Comment says "transmitted" but means "received"

Fix that. Also convert this and the related comment to proper commenting
style.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

7 years agoMerge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung...
Dave Airlie [Thu, 15 Mar 2012 09:41:26 +0000]
Merge branch 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes

* 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung:
  drm exynos: use drm_fb_helper_set_par directly
  drm/exynos: Fix fb_videomode <-> drm_mode_modeinfo conversion
  drm/exynos: fix runtime_pm fimd device state on probe
  drm/exynos: use correct 'exynos-drm' name for platform device

7 years agodrm exynos: use drm_fb_helper_set_par directly
Sascha Hauer [Wed, 14 Mar 2012 10:44:54 +0000]
drm exynos: use drm_fb_helper_set_par directly

info->fix.visual already is correctly set from drm_fb_helper_fill_fix.
info->fix.line_length is also set from drm_fb_helper_fill_fix,
so drm_fb_helper_set_par directly instead of a custom
exynos_drm_fbdev_set_par.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

7 years agodrm/exynos: Fix fb_videomode <-> drm_mode_modeinfo conversion
Laurent Pinchart [Fri, 9 Mar 2012 00:45:21 +0000]
drm/exynos: Fix fb_videomode <-> drm_mode_modeinfo conversion

The fb_videomode structure stores the front porch and back porch in the
right_margin and left_margin fields respectively. right_margin should
thus be computed with hsync_start - hdisplay, and left_margin with
htotal - hsync_end. The same holds for the vertical direction.

       Active               Front           Sync            Back
       Region               Porch                           Porch
<-------------------><----------------><-------------><---------------->

  //////////////////|
 ////////////////// |
//////////////////  |..................               ..................
                                       _______________

<------ xres -------><- right_margin -><- hsync_len -><- left_margin -->

<---- hdisplay ----->
<------------ hsync_start ------------>
<--------------------- hsync_end -------------------->
<--------------------------------- htotal ----------------------------->

Fix the fb_videomode <-> drm_mode_modeinfo conversion functions
accordingly.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

7 years agodrm/exynos: fix runtime_pm fimd device state on probe
Marek Szyprowski [Thu, 8 Mar 2012 01:28:56 +0000]
drm/exynos: fix runtime_pm fimd device state on probe

A call to pm_runtime_set_active() forces device to be at the active
state and skips calling its runtime suspend/resume callbacks. This
results in a freeze with a new power domain code based on gen_pd. Fimd
driver does all required runtime power management calls, so this
pm_runtime_set_active call is buggy. This patch removes it and corrects
clock management in probe function (clocks are now enabled by
pm_runtime_get_sync() call).

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

7 years agodrm/exynos: use correct 'exynos-drm' name for platform device
Marek Szyprowski [Mon, 5 Mar 2012 11:02:30 +0000]
drm/exynos: use correct 'exynos-drm' name for platform device

Currently Exynos DRM driver uses DRIVER_NAME ('exynos') name for the
core platform device. This is confusing, because it doesn't refer to the
function the platform device is performing. This patch renames the
platform device to the 'exynos-drm', which matches the convention for
naming the platform devices. The name used inside DRM subsystem has not
been changed.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

7 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-block
Linus Torvalds [Thu, 15 Mar 2012 00:16:45 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:
 "Been sitting on this for a while, but lets get this out the door.
  This fixes various important bugs for 3.3 final, along with a few more
  trivial ones.  Please pull!"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: fix ioc leak in put_io_context
  block, sx8: fix pointer math issue getting fw version
  Block: use a freezable workqueue for disk-event polling
  drivers/block/DAC960: fix -Wuninitialized warning
  drivers/block/DAC960: fix DAC960_V2_IOCTL_Opcode_T -Wenum-compare warning
  block: fix __blkdev_get and add_disk race condition
  block: Fix setting bio flags in drivers (sd_dif/floppy)
  block: Fix NULL pointer dereference in sd_revalidate_disk
  block: exit_io_context() should call elevator_exit_icq_fn()
  block: simplify ioc_release_fn()
  block: replace icq->changed with icq->flags

7 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Linus Torvalds [Thu, 15 Mar 2012 00:16:02 +0000]
Merge tag 'for-linus' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Another small batch of driver specific bug fixes, a couple more errors
  in the da9052 driver and a bad return value in the tps6524x driver."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: da9052: Ensure the selected voltage falls within the specified range
  regulator: Set n_voltages for da9052 regulators
  regulator: Fix setting selector in tps6524x set_voltage function

7 years agoMerge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux...
Linus Torvalds [Thu, 15 Mar 2012 00:13:49 +0000]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile update to run "make minconfig" on the tile defconfigs
from Chris Metcalf.

This removes almost three thousand lines of inane defconfig chatter.

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile/configs: convert to minimal configs via "make savedefconfig"

7 years agoarch/tile/configs: convert to minimal configs via "make savedefconfig"
Chris Metcalf [Wed, 14 Mar 2012 18:33:16 +0000]
arch/tile/configs: convert to minimal configs via "make savedefconfig"

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

7 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keith...
Dave Airlie [Wed, 14 Mar 2012 18:32:27 +0000]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/keithp/linux into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/keithp/linux:
  drm/i915: support 32 bit BGR formats in sprite planes
  drm/i915: fix color order for BGR formats on SNB
  drm/gma500: Fix Cedarview boot failures in 3.3-rc

7 years agoMerge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git...
Ingo Molnar [Wed, 14 Mar 2012 17:49:05 +0000]
Merge tag 'perf-urgent-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/urgent

Some corner case fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

7 years agohwmon: (zl6100) Enable interval between chip accesses for all chips
Guenter Roeck [Tue, 13 Mar 2012 16:05:14 +0000]
hwmon: (zl6100) Enable interval between chip accesses for all chips

Intersil reports that all chips supported by the zl6100 driver require
an interval between chip accesses, even ZL2004 and ZL6105 which were thought
to be safe.

Reported-by: Vivek Gani <vgani@intersil.com>
Cc: stable@vger.kernel.org # 3.2+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

7 years agoperf tools, x86: Build perf on older user-space as well
Ingo Molnar [Wed, 14 Mar 2012 15:42:34 +0000]
perf tools, x86: Build perf on older user-space as well

On ancient systems I get this build failure:

  util/../../../arch/x86/include/asm/unistd.h:67:29: error: asm/unistd_64.h: No such file or directory
  In file included from util/cache.h:7,
                   from builtin-test.c:8:
  util/../perf.h: In function ‘sys_perf_event_open’:In file included from util/../perf.h:16
  perf.h:170: error: ‘__NR_perf_event_open’ undeclared (first use in this function)

The reason is that this old system does not have the split
unistd.h headers yet, from which to pick up the syscall
definitions.

Add the syscall numbers to the already existing i386 and x86_64
blocks in perf.h, and also provide empty include file stubs.

With this patch perf builds and works fine on 5 years old
user-space as well.

Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: http://lkml.kernel.org/n/tip-jctwg64le1w47tuaoeyftsg9@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

7 years agoperf tools: Use scnprintf where applicable
Arnaldo Carvalho de Melo [Wed, 14 Mar 2012 15:29:29 +0000]
perf tools: Use scnprintf where applicable

Several places were expecting that the value returned was the number of
characters printed, not what would be printed if there was space.

Fix it by using the scnprintf and vscnprintf variants we inherited from
the kernel sources.

Some corner cases where the number of printed characters were not
accounted were fixed too.

Reported-by: Anton Blanchard <anton@samba.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/n/tip-kwxo2eh29cxmd8ilixi2005x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

7 years agoperf tools: Incorrect use of snprintf results in SEGV
Anton Blanchard [Wed, 7 Mar 2012 00:42:49 +0000]
perf tools: Incorrect use of snprintf results in SEGV

I have a workload where perf top scribbles over the stack and we SEGV.
What makes it interesting is that an snprintf is causing this.

The workload is a c++ gem that has method names over 3000 characters
long, but snprintf is designed to avoid overrunning buffers. So what
went wrong?

The problem is we assume snprintf returns the number of characters
written:

    ret += repsep_snprintf(bf + ret, size - ret, "[%c] ", self->level);
...
    ret += repsep_snprintf(bf + ret, size - ret, "%s", self->ms.sym->name);

Unfortunately this is not how snprintf works. snprintf returns the
number of characters that would have been written if there was enough
space. In the above case, if the first snprintf returns a value larger
than size, we pass a negative size into the second snprintf and happily
scribble over the stack. If you have 3000 character c++ methods thats a
lot of stack to trample.

This patch fixes repsep_snprintf by clamping the value at size - 1 which
is the maximum snprintf can write before adding the NULL terminator.

I get the sinking feeling that there are a lot of other uses of snprintf
that have this same bug, we should audit them all.

Cc: David Ahern <dsahern@gmail.com>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yanmin Zhang <yanmin_zhang@linux.intel.com>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120307114249.44275ca3@kryten
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

7 years agoblock: fix ioc leak in put_io_context
Xiaotian Feng [Wed, 14 Mar 2012 14:34:48 +0000]
block: fix ioc leak in put_io_context

When put_io_context is called, if ioc->icq_list is empty and refcount
is 1, kernel will not free the ioc.

This is caught by following kmemleak:

unreferenced object 0xffff880036349fe0 (size 216):
  comm "sh", pid 2137, jiffies 4294931140 (age 290579.412s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    01 00 01 00 ad 4e ad de ff ff ff ff 00 00 00 00  .....N..........
  backtrace:
    [<ffffffff8169f926>] kmemleak_alloc+0x26/0x50
    [<ffffffff81195a9c>] kmem_cache_alloc_node+0x1cc/0x2a0
    [<ffffffff81356b67>] create_io_context_slowpath+0x27/0x130
    [<ffffffff81356d2b>] get_task_io_context+0xbb/0xf0
    [<ffffffff81055f0e>] copy_process+0x188e/0x18b0
    [<ffffffff8105609b>] do_fork+0x11b/0x420
    [<ffffffff810247f8>] sys_clone+0x28/0x30
    [<ffffffff816d3373>] stub_clone+0x13/0x20
    [<ffffffffffffffff>] 0xffffffffffffffff

ioc should be freed if ioc->icq_list is empty.
Signed-off-by: Xiaotian Feng <dannyfeng@tencent.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

7 years agoiscsi-target: Fix reservation conflict -EBUSY response handling bug
Nicholas Bellinger [Wed, 14 Mar 2012 01:20:11 +0000]
iscsi-target: Fix reservation conflict -EBUSY response handling bug

This patch addresses a iscsi-target specific bug related to reservation conflict
handling in iscsit_handle_scsi_cmd() that has been causing reservation conflicts
to complete and not fail as expected due to incorrect errno checking.  The problem
occured with the change to return -EBUSY from transport_generic_cmd_sequencer() ->
transport_generic_allocate_tasks() failures, that broke iscsit_handle_scsi_cmd()
checking for -EINVAL in order to invoke a non GOOD status response.

This was manifesting itself as data corruption with legacy SPC-2 reservations,
but also effects iscsi-target LUNs with SPC-3 persistent reservations.

This bug was originally introduced in lio-core commit:

commit 03e98c9eb916f3f0868c1dc344dde2a60287ff72
Author: Nicholas Bellinger <nab@linux-iscsi.org>
Date:   Fri Nov 4 02:36:16 2011 -0700

    target: Address legacy PYX_TRANSPORT_* return code breakage

Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Martin Svec <martin.svec@zoner.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

7 years agotarget: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASE
Nicholas Bellinger [Wed, 14 Mar 2012 04:29:06 +0000]
target: Fix compatible reservation handling (CRH=1) with legacy RESERVE/RELEASE

This patch addresses a bug with target_check_scsi2_reservation_conflict()
return checking in target_scsi2_reservation_[reserve,release]() that was
preventing CRH=1 operation from silently succeeding in the two special
cases defined by SPC-3, and not failing with reservation conflict status
when dealing with legacy RESERVE/RELEASE + active SPC-3 PR logic.

Also explictly set cmd->scsi_status = SAM_STAT_RESERVATION_CONFLICT during
the early non reservation holder failure from pr_ops->t10_seq_non_holder()
check in transport_generic_cmd_sequencer() for fabrics that already expect
it to be set.

This bug was originally introduced in mainline commit:

commit eacac00ce5bfde8086cd0615fb53c986f7f970fe
Author: Christoph Hellwig <hch@infradead.org>
Date:   Thu Nov 3 17:50:40 2011 -0400

    target: split core_scsi2_emulate_crh

Reported-by: Martin Svec <martin.svec@zoner.cz>
Cc: Martin Svec <martin.svec@zoner.cz>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Wed, 14 Mar 2012 01:39:28 +0000]
Merge git://git./linux/kernel/git/davem/sparc

Pull sparc updates from David Miller:
 "Please pull to get this fix for the sparc32 build when using a more
  recent binutils."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: Add -Av8 to assembler command line.

7 years agosparc32: Add -Av8 to assembler command line.
David S. Miller [Wed, 14 Mar 2012 01:19:51 +0000]
sparc32: Add -Av8 to assembler command line.

Newer version of binutils are more strict about specifying the
correct options to enable certain classes of instructions.

The sparc32 build is done for v7 in order to support sun4c systems
which lack hardware integer multiply and divide instructions.

So we have to pass -Av8 when building the assembler routines that
use these instructions and get patched into the kernel when we find
out that we have a v8 capable cpu.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 14 Mar 2012 00:57:07 +0000]
Merge git://git./linux/kernel/git/davem/net

Pull networking changes from David Miller:
 "The most important bit here is the TCP syncookies issue, which seems
  to have been busted for some time.  That fix has been verified in
  production by the reporter.

  1) Persistent TUN devices erroneously hold on to the network namespace
     in such a way that it cannot be shutdown.  Fix from Stanislav
     Kinsbursky with help from Eric Dumazet.

  2) TCP SYN cookies have been broken for a while due to how the route
     lookup flow key is managed, connections can be delayed by as much
     as 20 seconds due to this bug.  Fix from Eric Dumazet.

  3) Missing jiffies.h include in lib/dynamic_queue_limits.c can break
     the build, from Tom Herbert.

  4) Add USB device ID for Sitecom LN-031, from Joerg Neikes.

  5) Fix OOPS in delayed workqueue in iwlegacy, from Stanislaw Gruszka.

  6) rt2x00 TX queue can be disabled forever due to races, fix by
     synchronizing pause/unpause with a lock.  Also from Stanislaw
     Gruszka.

  7) Statistics and endian fix in bnx2x driver from Yuval Mintz, Eilon
     Greenstein, and Ariel Elior."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tun: don't hold network namespace by tun sockets
  bnx2x: FCoE statistics id fixed
  bnx2x: dcb bit indices flags used as bits
  bnx2x: added cpu_to_le16 when preparing ramrod's data
  bnx2x: pfc statistics counts pfc events twice
  rt2x00: fix random stalls
  iwl3945: fix possible il->txq NULL pointer dereference in delayed works
  dql: Fix undefined jiffies
  tcp: fix syncookie regression
  usb: asix: Patch for Sitecom LN-031

7 years agoMerge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux...
Linus Torvalds [Wed, 14 Mar 2012 00:06:02 +0000]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile update from Chris Metcalf
 "These include a couple of queued-up minor bug fixes from the
  community, a fix to unbreak the sysfs hooks in tile, and syncing up
  the defconfigs."

Ugh.  defconfigs updates without "make minconfig".  Tons of ugly
pointless lines there, I suspect.

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: Use set_current_blocked() and block_sigmask()
  arch/tile: misplaced parens near likely
  arch/tile: sync up the defconfig files to the tip
  arch/tile: Fix up from commit 8a25a2fd126c621f44f3aeaef80d51f00fc11639

7 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 14 Mar 2012 00:04:50 +0000]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf record: Fix buffer overrun bug in tracepoint_id_to_path()
  perf/x86: Fix local vs remote memory events for NHM/WSM

7 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Wed, 14 Mar 2012 00:03:53 +0000]
Merge git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Do not kmalloc under the flocks spinlock
  cifs: possible memory leak in xattr.