10 years agoASoC: Adding OMAP3517 / AM3517 EVM support in ASOC
Anuj Aggarwal [Thu, 29 Oct 2009 18:52:30 +0000]
ASoC: Adding OMAP3517 / AM3517 EVM support in ASOC

Adding support for OMAP3517 / AM3517 EVM in Alsa SoC.

Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: OMAP3EVM: Use the twl4030_setup_data for headset pop-removal
Anuj Aggarwal [Wed, 23 Sep 2009 07:10:31 +0000]
ASoC: OMAP3EVM: Use the twl4030_setup_data for headset pop-removal

The pop-removal specific values are configured for TWL4030 codec
for OMAP3EVM through this patch.

Signed-off-by: Anuj Aggarwal <anuj.aggarwal@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TWL4030: Add APLL supply for the capture path
Peter Ujfalusi [Thu, 29 Oct 2009 11:05:52 +0000]
ASoC: TWL4030: Add APLL supply for the capture path

Capture path also need the APLL enabled, adding DAPM_SUPPLY
for the Virtual ADCs.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TWL4030: Change APLL powering sequence
Peter Ujfalusi [Thu, 29 Oct 2009 09:58:10 +0000]
ASoC: TWL4030: Change APLL powering sequence

It seams that certain part of the twl4030 codec needs the APLL
enabled before they are enabled.
Paths which has any digital processing needs need the APLL
enabled before they can function.
For example the vibra output will have some random data after
it is enabled and before the APLL also enabled.

If only analog components are in use (analog bypass), than it
seams, that the APLL does not need to be enabled. This lowers
the power consumption with around ~0.005A.

Adding DAPM_SUPPLY to the Digital playback route and also
to the capture route to enable and disable the APLL.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TWL4030: Vibra motor stop fix when it is driven with audio
Jari Vanhala [Thu, 29 Oct 2009 09:58:09 +0000]
ASoC: TWL4030: Vibra motor stop fix when it is driven with audio

This patch fixes vibrator playing incoherently, when driven
with audio. There is something wrong in switch 3 at
H-bridge and VIBRA_SET still affects PWM generator.
Slowest value fixes things.

Signed-off-by: Jari Vanhala <ext-jari.vanhala@nokia.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: CS4270: export de-emphasis filter as ALSA control
Daniel Mack [Thu, 29 Oct 2009 01:24:32 +0000]
ASoC: CS4270: export de-emphasis filter as ALSA control

The CS4270 codec features an de-emphasis filter for compensation of
audio material filtered by an 50/15 uS algorithm. Not sure whether we
should always enable it for 44100Hz sampling frequency, but it should at
least be configurable by the user.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Minor SMDK64xx WM8580 cleanups
Mark Brown [Wed, 28 Oct 2009 15:47:48 +0000]
ASoC: Minor SMDK64xx WM8580 cleanups

Fix up some comments, remove all enable_pin() calls (edge widgets
are all enabled by default) and mark the microphone as disabled by
default since it requires a resistor fit to connect it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TWL4030: Change codec_muted to apll_enabled
Peter Ujfalusi [Wed, 28 Oct 2009 08:57:05 +0000]
ASoC: TWL4030: Change codec_muted to apll_enabled

codec_muted is missleading, change it to apll_enabled,
which is what it is doing: enabing and disabling the APLL.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TWL4030: Remove bypass tracking
Peter Ujfalusi [Wed, 28 Oct 2009 08:57:04 +0000]
ASoC: TWL4030: Remove bypass tracking

Since ASoC core now handling the codec bias differently
there is no need to do the tracking of bypass switch states
anymore.

Handling of the common bit for analog loopbacks is done with
DAPM_SUPPLY for the bypass paths.

Now this bit is only enabled when there is a complete analog
bypass path, compared to the previous implementation, when the
global switch was enabled if there were any of the analog
bypass switch was on (regardless if there were complete path or
not)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Add regulator support for WM8731
Mark Brown [Mon, 26 Oct 2009 15:20:17 +0000]
ASoC: Add regulator support for WM8731

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TWL4030: Driver registration via twl4030_codec MFD
Peter Ujfalusi [Thu, 22 Oct 2009 10:26:48 +0000]
ASoC: TWL4030: Driver registration via twl4030_codec MFD

Change the way how the twl4030 soc codec driver is
loaded/probed.
Use the device probing via tlw4030_codec MFD device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TWL4030: use the twl4030-codec.h for register descriptions
Peter Ujfalusi [Thu, 22 Oct 2009 10:26:47 +0000]
ASoC: TWL4030: use the twl4030-codec.h for register descriptions

Remove the register descriptions from the twl4030.h file and use
the linux/mfd/twl4030-codec.h instead, which has the codec
related register descriptions also.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoOMAP: Platform support for twl4030_codec MFD
Peter Ujfalusi [Thu, 22 Oct 2009 10:26:46 +0000]
OMAP: Platform support for twl4030_codec MFD

Add needed platform data for the twl4030_codec MFD on boards,
where the audio part of the twl4030 codec is used.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoMFD: twl4030: add twl4030_codec MFD as a new child to the core
Peter Ujfalusi [Thu, 22 Oct 2009 10:26:45 +0000]
MFD: twl4030: add twl4030_codec MFD as a new child to the core

New MFD child to twl4030 MFD device.

Reason for the twl4030_codec MFD: the vibra control is actually in the codec
part of the twl4030. If both the vibra and the audio functionality is needed
from the twl4030 at the same time, than they need to control the codec power
and APLL at the same time without breaking the other driver.
Also these two has to be able to work without the need for the other driver.

This MFD device will be used by the drivers, which needs resources
from the twl4030 codec like audio and vibra.

The platform specific configuration data is passed along to the
child drivers (audio, vibra).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1
Janusz Krzysztofik [Wed, 21 Oct 2009 21:10:03 +0000]
ASoC: OMAP: Don't try to set unsupported OMAP_DMA_DATA_BURST_16 on OMAP1

After DMA burst mode has been introduced in sound/soc/omap/omap-pcm.c,
omap_pcm_prepare() unconditionally calls:

        omap_set_dma_src_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);
        omap_set_dma_dest_burst_mode(prtd->dma_ch, OMAP_DMA_DATA_BURST_16);

Current implementation of those two functions found in
arch/arm/plat-ompa/dma.c doesn't support OMAP_DMA_DATA_BURST_16 on OMAP1 at
all, so they both end with BUG() on that machine. That results in
ASoC being completely unusable, at least on my OMAP5910 based Amstrad Delta.

The patch corrects the problem by not calling those two functions when run on
OMAP1 class based machines.

Created against linux-2.6.32-rc5.
Tested on Amstrad Delta.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: tlv320dac33: typo fix in the header
Peter Ujfalusi [Wed, 21 Oct 2009 06:58:35 +0000]
ASoC: tlv320dac33: typo fix in the header

Fix the definition of DAC33_LTM field, the LTM bits in
FIFO_IRQ_MODE_B register are starting at bit 6.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Amstrad Delta minor cleanups
Janusz Krzysztofik [Wed, 21 Oct 2009 02:40:55 +0000]
ASoC: Amstrad Delta minor cleanups

Hi Mark,

Here is a patch that corrects small omissions I have found in my code.

Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoMerge branch 'for-2.6.32' into for-2.6.33
Mark Brown [Mon, 19 Oct 2009 15:15:35 +0000]
Merge branch 'for-2.6.32' into for-2.6.33

10 years agoASoC: Fix possible codec_dai->ops NULL pointer problems
Barry Song [Fri, 16 Oct 2009 10:13:38 +0000]
ASoC: Fix possible codec_dai->ops NULL pointer problems

Some codec DAIs like stac9766, wm9712, wm9713, ad1980 don't register themselves
then it loses to the chance to be given a null_dai_ops in snd_soc_register_dai
if they have no ops. When functions like soc_pcm_open, soc_pcm_hw_params etc.
access the ops field in these DAIs, panic will happen.

Signed-off-by: Barry Song <21cnbao@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Move dereference after NULL test
Julia Lawall [Sat, 17 Oct 2009 06:32:56 +0000]
ASoC: Move dereference after NULL test

If the NULL test on jack is needed, then the derefernce should be after the
NULL test.

A simplified version of the semantic match that detects this problem is as
follows (http://coccinelle.lip6.fr/):

// <smpl>
@match exists@
expression x, E;
identifier fld;
@@

* x->fld
  ... when != \(x = E\|&x\)
* x == NULL
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: au1x: psc-ac97: reorganize timeouts
Manuel Lauss [Mon, 19 Oct 2009 14:10:59 +0000]
ASoC: au1x: psc-ac97: reorganize timeouts

Codec read/write functions: wait 21us between the pokings of hardware.
Add timeouts to unbounded loops waiting for bits to change.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: au1x: psc-ac97: verify correct codec register was read
Manuel Lauss [Mon, 19 Oct 2009 14:10:58 +0000]
ASoC: au1x: psc-ac97: verify correct codec register was read

Verify that the correct register has been received from the codec.

Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TWL4030: Only update the needed bits in *set_dai_sysclk
Peter Ujfalusi [Mon, 19 Oct 2009 12:42:19 +0000]
ASoC: TWL4030: Only update the needed bits in *set_dai_sysclk

Do not rewrite the whole register, but only update the needed
bits in set_dai_sysclk functions.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoMerge branch 'for-2.6.32' into for-2.6.33
Mark Brown [Thu, 15 Oct 2009 14:02:14 +0000]
Merge branch 'for-2.6.32' into for-2.6.33

10 years agoASoC: Codec driver for Texas Instruments tlv320dac33 codec
Peter Ujfalusi [Thu, 15 Oct 2009 06:03:56 +0000]
ASoC: Codec driver for Texas Instruments tlv320dac33 codec

Driver for Texas Instruments TLV320DAC33 (SLAS546) low power stereo
audio DAC.

TLV320DAC33 is a stereo audio codec with integrated 24KB FIFO for low
power audio playback.

The digital interface can use I2S, DSP (A or B), Right and Left
justified formats.
DAC33 has stereo analog input, which can be bypassed to the analog
outputs.

Regarding to the internal 24KB FIFO the driver implements 'FIFO bypass'
mode (default) and nSample mode (FIFO is in use).
a) In 'FIFO bypass' mode the internal FIFO is not in use, the codec is
working synchronously as a normal codec (it needs constant stream of
data on the digital interface).

b) The nSample mode implementation uses one interrupt line from DAC33 to
the host:
Alarm threshold is set to 10ms of audio data (limit by the driver
implementation).
DAC33 will signal an interrupt, when the FIFO level goes under the
Alarm threshold.
The host will write to nSample register a value (number of stereo
samples), to tell DAC33 how many samples it should read in a burst from
the host. When the DAC33 received the number of samples, it disables the
clocks on the I2S bus. When the FIFO use again goes under the Alarm
threshold, DAC33 signals the host with an interrupt, and the process is
repeated.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: finally enable support for eXeda and CM-X300
Igor Grinberg [Wed, 14 Oct 2009 07:20:26 +0000]
ASoC: finally enable support for eXeda and CM-X300

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
CC: Mark Brown <broonie@opensource.wolfsonmicro.com>
CC: alsa-devel@alsa-project.org
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Remove snd_soc_suspend_device()
Mark Brown [Tue, 13 Oct 2009 16:39:56 +0000]
ASoC: Remove snd_soc_suspend_device()

The PM core will grow pm_link infrastructure in 2.6.33 which can be
used to implement the intended functionality of the ASoC-specific
device suspend and resume callbacks so drop them.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: S3C: Remove <plat/audio.h>
Ben Dooks [Mon, 12 Oct 2009 20:17:09 +0000]
ASoC: S3C: Remove <plat/audio.h>

Remove the <plat/audio.h> include from arch/arm/plat-s3c/include/plat/audio.h
as it provides nothing to the current kernel and is not in any future plans
for the system.

Signed-off-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Simtec Linux Team <linux@simtec.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Serialize access to dapm_power_widgets()
Eero Nurkkala [Mon, 12 Oct 2009 05:41:59 +0000]
ASoC: Serialize access to dapm_power_widgets()

Access to damp_power_widgets() is assumed to be single-threaded.
Concurrent accesses to dapm_power_widgets() may result in
unpredictable behavior.

Calls from:
close_delayed_work()
soc_codec_close()
soc_pcm_prepare()
soc_suspend()
soc_resume_deferred()
to snd_soc_dapm_stream_event() do not have the codec->mutex
taken to cover the call to dapm_power_widgets(). Thus, take
the mutex in these paths also to assure single-threaded use
of dapm_power_widgets().

Signed-off-by: Eero Nurkkala <ext-eero.nurkkala@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TPA6130A2: Make tpa6130a2_power as static
Peter Ujfalusi [Mon, 12 Oct 2009 08:43:55 +0000]
ASoC: TPA6130A2: Make tpa6130a2_power as static

The power for the amplifier should be handled internally
by the tpa6130a2 driver.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Minor fixups to tpa6130a2 driver
Mark Brown [Fri, 9 Oct 2009 18:13:47 +0000]
ASoC: Minor fixups to tpa6130a2 driver

- Staticise ttpa6130a2_client.
- Remove unneeded cast from void.
- Use explict NULL rather than 0.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: TPA6130A2 amplifier driver
Peter Ujfalusi [Fri, 9 Oct 2009 12:55:41 +0000]
ASoC: TPA6130A2 amplifier driver

Driver for Texas Instruments TPA6130A2 stereo headphone
amplifier.

The driver provides playback gain control and also pre-defined
DAPM_HP widgets and DAPM routings for power management.

The DAPM_HP widget names are:
"TPA6130A2 Headphone Left"
"TPA6130A2 Headphone Right"

From soc machine drivers to use with the tpa6130a2 amplifier,
the tpa6130a2_add_controls has to be called, which adds the alsa
controls and the DAPM routing needed for the tpa6130a2.
After that the machine driver can connect the codec's output
with 'TPA6130A2 Left' and 'TPA6130A2 Right':

        {"TPA6130A2 Left", NULL, "CODEC LEFT OUT"},
        {"TPA6130A2 Right", NULL, "CODEC RIGHT OUT"},

Internally the left and right channels are powered separately.
When none of the channels are needed the amplifier is powered
down:
hard power: valid GPIO number is passed within platform data
soft power: Using the software shutdown of the amplifier

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: at91sam9g20ek_2mmc board uses same audio connexion as at91sam9g20ek
Nicolas Ferre [Thu, 8 Oct 2009 16:19:49 +0000]
ASoC: at91sam9g20ek_2mmc board uses same audio connexion as at91sam9g20ek

The modified revision of at91sam9g20 Evaluation Kit rev. C and onwards share
with previous ones its audio connexion to Wolfson wm8731. Modify the SoC file
to extend the machine ID checking.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoMerge branch 'for-2.6.32' into for-2.6.33
Mark Brown [Thu, 8 Oct 2009 09:45:09 +0000]
Merge branch 'for-2.6.32' into for-2.6.33

10 years agoMerge branch 'upstream/wm8350' into for-2.6.32
Mark Brown [Tue, 6 Oct 2009 18:29:47 +0000]
Merge branch 'upstream/wm8350' into for-2.6.32

10 years agoASoC: WM8350 capture PGA mutes are inverted
Mark Brown [Mon, 29 Jun 2009 10:17:10 +0000]
ASoC: WM8350 capture PGA mutes are inverted

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

10 years agoASoC: Remove absent SYNC and TDM DAI format options from i.MX SSI
Mark Brown [Tue, 6 Oct 2009 18:25:02 +0000]
ASoC: Remove absent SYNC and TDM DAI format options from i.MX SSI

These should be handled via set_tdm_slot() now and cause build
failures as-is.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoMerge branch 'for-2.6.32' into for-2.6.33
Mark Brown [Tue, 6 Oct 2009 15:01:27 +0000]
Merge branch 'for-2.6.32' into for-2.6.33

10 years agoASoC: Add virtual enumeration support for DAPM muxes
Mark Brown [Tue, 6 Oct 2009 14:21:04 +0000]
ASoC: Add virtual enumeration support for DAPM muxes

Sometimes it is desirable to have a mux which does not reflect any
direct register configuration but which will instead only have an
effect implicitly (for example, as a result of changing which parts
of the device are powered up). Provide a virtual mux for this purpose.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Push DAPM enumeration register change test out
Mark Brown [Mon, 5 Oct 2009 16:23:30 +0000]
ASoC: Push DAPM enumeration register change test out

Don't assume that enumerations are backed by registers when updating
mux power.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoASoC: Simplify code for DAPM widget updates
Mark Brown [Mon, 5 Oct 2009 15:24:26 +0000]
ASoC: Simplify code for DAPM widget updates

We don't need to check for an event callback since we also check for
an appropriate event flag when applying mux status changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

10 years agoMerge branch 'for-2.6.32' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Mark Brown [Tue, 6 Oct 2009 11:11:09 +0000]
Merge branch 'for-2.6.32' of git://git./linux/kernel/git/broonie/sound-2.6 into for-2.6.32

10 years agoMerge branch 'for-2.6.32' into for-2.6.33
Mark Brown [Mon, 5 Oct 2009 09:36:28 +0000]
Merge branch 'for-2.6.32' into for-2.6.33

10 years agoLinux 2.6.32-rc3
Linus Torvalds [Mon, 5 Oct 2009 00:12:30 +0000]
Linux 2.6.32-rc3

I'm skipping -rc2 because the -rc1 Makefile mistakenly said -rc2, so in
order to avoid confusion, I'm jumping from -rc1 to -rc3.  That way, when
'uname' (or an oops report) says 2.6.32-rc2, there's no confusion about
whether people perhaps meant -rc1 or -rc2.

10 years agoheaders: remove sched.h from poll.h
Alexey Dobriyan [Sun, 4 Oct 2009 12:11:37 +0000]
headers: remove sched.h from poll.h

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoMerge branch 'acpi-pad' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sun, 4 Oct 2009 22:03:00 +0000]
Merge branch 'acpi-pad' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'acpi-pad' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  acpi_pad: build only on X86
  ACPI: create Processor Aggregator Device driver

Fixup trivial conflicts in MAINTAINERS file.

10 years agoMerge branch 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb...
Linus Torvalds [Sun, 4 Oct 2009 22:00:08 +0000]
Merge branch 'sfi-release' of git://git./linux/kernel/git/lenb/linux-sfi-2.6

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: remove __init from sfi_verify_table
  SFI: fix section mismatch warnings in sfi_core.c

10 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux...
Linus Torvalds [Sun, 4 Oct 2009 21:59:53 +0000]
Merge branch 'release' of git://git./linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: EC: Don't parse DSDT for EC early init on Compal
  ACPI: EC: Rewrite DMI checks
  ACPI: dock: fix "sibiling" typo
  ACPI: kill overly verbose "throttling states" log messages
  ACPI: Fix bound checks for copy_from_user in the acpi /proc code
  ACPI: fix bus scanning memory leaks
  ACPI: EC: Restart command even if no interrupts from EC
  sony-laptop: Don't unregister the SPIC driver if it wasn't registered
  sony-laptop: remove _INI call at init time
  sony-laptop: SPIC unset IRQF_SHARED, set IRQF_DISABLED
  sony-laptop: remove device_ctrl and the SPIC mini drivers

10 years agoMerge branch 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvar...
Linus Torvalds [Sun, 4 Oct 2009 21:59:14 +0000]
Merge branch 'i2c-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  macintosh: Don't assume i2c device probing always succeeds
  i2c: Hide probe errors caused by ACPI resource conflicts
  i2c: Minor documentation update
  mfd: AB3100 drop unused module parameters
  Staging: IIO: tsl2561: Drop unused module parameters
  leds: leds-pca9532 - Drop unused module parameters
  ltc4215/ltc4245: Discard obsolete detect methods
  ds2482: Discard obsolete detect method
  max6875: Discard obsolete detect method
  i2c: Move misc devices documentation

10 years agomacintosh: Don't assume i2c device probing always succeeds
Jean Delvare [Sun, 4 Oct 2009 20:53:46 +0000]
macintosh: Don't assume i2c device probing always succeeds

If i2c device probing fails, then there is no driver to dereference
after calling i2c_new_device(). Stop assuming that probing will always
succeed, to avoid NULL pointer dereferences. We have an easier access
to the driver anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Tim Shepard <shep@alum.mit.edu>
Cc: Colin Leroy <colin@colino.net>

10 years agoi2c: Hide probe errors caused by ACPI resource conflicts
Jean Delvare [Sun, 4 Oct 2009 20:53:45 +0000]
i2c: Hide probe errors caused by ACPI resource conflicts

When an ACPI resource conflict is detected, error messages are already
printed by ACPI. There's no point in causing the driver core to print
more error messages, so return one of the error codes for which no
message is printed.

This fixes bug #14293:
http://bugzilla.kernel.org/show_bug.cgi?id=14293

Signed-off-by: Jean Delvare <khali@linux-fr.org>

10 years agoi2c: Minor documentation update
Jean Delvare [Sun, 4 Oct 2009 20:53:45 +0000]
i2c: Minor documentation update

The sysfs path to i2c adapters has changed recently, update the
documentation to reflect that change.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

10 years agomfd: AB3100 drop unused module parameters
Jean Delvare [Sun, 4 Oct 2009 20:53:44 +0000]
mfd: AB3100 drop unused module parameters

The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which
implement device detection. The ab3100 driver doesn't, so there is no
point in calling it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Cc: Samuel Ortiz <sameo@linux.intel.com>

10 years agoStaging: IIO: tsl2561: Drop unused module parameters
Jean Delvare [Sun, 4 Oct 2009 20:53:43 +0000]
Staging: IIO: tsl2561: Drop unused module parameters

The I2C_CLIENT_INSMOD macro is only useful for i2c drivers which
implement device detection. The tsl2561 driver doesn't, so there
is no point in calling it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jonathan Cameron <jic23@cam.ac.uk>

10 years agoleds: leds-pca9532 - Drop unused module parameters
Jean Delvare [Sun, 4 Oct 2009 20:53:43 +0000]
leds: leds-pca9532 - Drop unused module parameters

The I2C_CLIENT_INSMOD_1 macro is only useful for i2c drivers which
implement device detection. The leds-pca9532 driver doesn't, so there
is no point in calling it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Riku Voipio <riku.voipio@iki.fi>

10 years agoltc4215/ltc4245: Discard obsolete detect methods
Jean Delvare [Sun, 4 Oct 2009 20:53:42 +0000]
ltc4215/ltc4245: Discard obsolete detect methods

There is no point in implementing a detect callback for the LTC4215
and LTC4245, as these devices can't be detected. It was there solely
to handle "force" module parameters to instantiate devices, but now
we have a better sysfs interface that can do the same.

So we can get rid of the ugly module parameters and the detect
callbacks. This shrinks the binary module sizes by 36% and 46%,
respectively.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ira W. Snyder <iws@ovro.caltech.edu>

10 years agods2482: Discard obsolete detect method
Jean Delvare [Sun, 4 Oct 2009 20:53:41 +0000]
ds2482: Discard obsolete detect method

There is no point in implementing a detect callback for the DS2482, as
this device can't be detected. It was there solely to handle "force"
module parameters to instantiate devices, but now we have a better sysfs
interface that can do the same.

So we can get rid of the ugly module parameters and the detect callback.
This shrinks the binary module size by 21%.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Ben Gardner <gardner.ben@gmail.com>

10 years agomax6875: Discard obsolete detect method
Jean Delvare [Sun, 4 Oct 2009 20:53:41 +0000]
max6875: Discard obsolete detect method

There is no point in implementing a detect callback for the MAX6875, as
this device can't be detected. It was there solely to handle "force"
module parameters to instantiate devices, but now we have a better sysfs
interface that can do the same.

So we can get rid of the ugly module parameters and the detect callback.
This basically divides the binary module size by 2.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Ben Gardner <gardner.ben@gmail.com>

10 years agoi2c: Move misc devices documentation
Jean Delvare [Sun, 4 Oct 2009 20:53:40 +0000]
i2c: Move misc devices documentation

Some times ago the eeprom and max6875 drivers moved to
drivers/misc/eeprom, but their documentation did not follow. It's
finally time to get rid of Documentation/i2c/chips.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ben Gardner <gardner.ben@gmail.com>
Acked-by: Wolfram Sang <w.sang@pengutronix.de>

10 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Sun, 4 Oct 2009 19:39:14 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block: (41 commits)
  Revert "Seperate read and write statistics of in_flight requests"
  cfq-iosched: don't delay async queue if it hasn't dispatched at all
  block: Topology ioctls
  cfq-iosched: use assigned slice sync value, not default
  cfq-iosched: rename 'desktop' sysfs entry to 'low_latency'
  cfq-iosched: implement slower async initiate and queue ramp up
  cfq-iosched: delay async IO dispatch, if sync IO was just done
  cfq-iosched: add a knob for desktop interactiveness
  Add a tracepoint for block request remapping
  block: allow large discard requests
  block: use normal I/O path for discard requests
  swapfile: avoid NULL pointer dereference in swapon when s_bdev is NULL
  fs/bio.c: move EXPORT* macros to line after function
  Add missing blk_trace_remove_sysfs to be in pair with blk_trace_init_sysfs
  cciss: fix build when !PROC_FS
  block: Do not clamp max_hw_sectors for stacking devices
  block: Set max_sectors correctly for stacking devices
  cciss: cciss_host_attr_groups should be const
  cciss: Dynamically allocate the drive_info_struct for each logical drive.
  cciss: Add usage_count attribute to each logical drive in /sys
  ...

10 years agoRevert "Seperate read and write statistics of in_flight requests"
Jens Axboe [Sun, 4 Oct 2009 19:04:38 +0000]
Revert "Seperate read and write statistics of in_flight requests"

This reverts commit a9327cac440be4d8333bba975cbbf76045096275.

Corrado Zoccolo <czoccolo@gmail.com> reports:

"with 2.6.32-rc1 I started getting the following strange output from
"iostat -kx 2":
Linux 2.6.31bisect (et2)  04/10/2009  _i686_ (2 CPU)

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
          10,70    0,00    3,16   15,75    0,00   70,38

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda              18,22     0,00    0,67    0,01    14,77     0,02
43,94     0,01   10,53 39043915,03 2629219,87
sdb              60,89     9,68   50,79    3,04  1724,43    50,52
65,95     0,70   13,06 488437,47 2629219,87

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           2,72    0,00    0,74    0,00    0,00   96,53

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           6,68    0,00    0,99    0,00    0,00   92,33

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00

avg-cpu:  %user   %nice %system %iowait  %steal   %idle
           4,40    0,00    0,73    1,47    0,00   93,40

Device:         rrqm/s   wrqm/s     r/s     w/s    rkB/s    wkB/s
avgrq-sz avgqu-sz   await  svctm  %util
sda               0,00     0,00    0,00    0,00     0,00     0,00
0,00     0,00    0,00   0,00 100,00
sdb               0,00     4,00    0,00    3,00     0,00    28,00
18,67     0,06   19,50 333,33 100,00

Global values for service time and utilization are garbage. For
interval values, utilization is always 100%, and service time is
higher than normal.

I bisected it down to:
[a9327cac440be4d8333bba975cbbf76045096275] Seperate read and write
statistics of in_flight requests
and verified that reverting just that commit indeed solves the issue
on 2.6.32-rc1."

So until this is debugged, revert the bad commit.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agocfq-iosched: don't delay async queue if it hasn't dispatched at all
Jens Axboe [Sun, 4 Oct 2009 18:36:19 +0000]
cfq-iosched: don't delay async queue if it hasn't dispatched at all

We cannot delay for the first dispatch of the async queue if it
hasn't dispatched at all, since that could present a local user
DoS attack vector using an app that just did slow timed sync reads
while filling memory.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoMerge branch 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev
Linus Torvalds [Sun, 4 Oct 2009 04:57:06 +0000]
Merge branch 'for-linus' of git://linux-m32r.org/git/takata/linux-2.6_dev

* 'for-linus' of git://www.linux-m32r.org/git/takata/linux-2.6_dev:
  m32r: Fix IPI function calls for SMP
  m32r: Fix set_memory() for DISCONTIGMEM
  m32r: add rtc_lock variable
  m32r: define ioread* and iowrite* macros
  m32r: export delay loop symbols
  m32r: fix tme_handler

10 years agotty: Avoid dropping ldisc_mutex over hangup tty re-initialization
Linus Torvalds [Sun, 4 Oct 2009 04:44:21 +0000]
tty: Avoid dropping ldisc_mutex over hangup tty re-initialization

A couple of people have hit the WARN_ON() in drivers/char/tty_io.c,
tty_open() that is unhappy about seeing the tty line discipline go away
during the tty hangup. See for example

http://bugzilla.kernel.org/show_bug.cgi?id=14255

and the reason is that we do the tty_ldisc_halt() outside the
ldisc_mutex in order to be able to flush the scheduled work without a
deadlock with vhangup_work.

However, it turns out that we can solve this particular case by

 - using "cancel_delayed_work_sync()" in tty_ldisc_halt(), which waits
   for just the particular work, rather than synchronizing with any
   random outstanding pending work.

   This won't deadlock, since the buf.work we synchronize with doesn't
   care about the ldisc_mutex, it just flushes the tty ldisc buffers.

 - realize that for this particular case, we don't need to wait for any
   hangup work, because we are inside the hangup codepaths ourselves.

so as a result we can just drop the flush_scheduled_work() entirely, and
then move the tty_ldisc_halt() call to inside the mutex.  That way we
never expose the partially torn down ldisc state to tty_open(), and hold
the ldisc_mutex over the whole sequence.

Reported-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Heinz Diehl <htd@fancy-poultry.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agom32r: Fix IPI function calls for SMP
Toshihiro HANAWA [Fri, 2 Oct 2009 08:52:54 +0000]
m32r: Fix IPI function calls for SMP

This patch fixes the m32r SMP kernel after 2.6.27.

A part of the following patch breaks m32r SMP operation.
> m32r: convert to generic helpers for IPI function calls
> commit 7b7426c8a615cf61df9a77b9df7d5b75d91e3fa0

In the above patch, a CALL_FUNC_SINGLE_IPI was newly introduced,
but the its IPI vector number was wrong in the patch code.

The m32r SMP kernel hanged-up during boot operation, because
the CPU_BOOT_IPI was called instead of CALL_FUNC_SINGLE_IPI
(CPU_BOOT_IPI had no side effect at that time because the 2nd
core had already been started up),
as a result, csd_unlock() was not called, then a dead lock
occurred in csd_lock_wait() after the detection of Compact Flash
memory as IDE generic disk.

Signed-off-by: Toshihiro HANAWA <hanawa@ccs.tsukuba.ac.jp>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

10 years agom32r: Fix set_memory() for DISCONTIGMEM
Hirokazu Takata [Wed, 23 Sep 2009 12:37:06 +0000]
m32r: Fix set_memory() for DISCONTIGMEM

In case CONFIG_DISCONTIGMEM is set, the memory size of system was
always determined by CONFIG_MEMORY_SIZE and was not changeable.

This patch fixes set_memory() of arch/m32r/mm/discontig.c so that
we can specify memory size by the "mem=<size>" kernel parameter.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

10 years agom32r: add rtc_lock variable
Hirokazu Takata [Wed, 26 Aug 2009 04:13:12 +0000]
m32r: add rtc_lock variable

Add a spinlock variable "rtc_lock".
This is taken from arch/arm/kernel/time.c.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

10 years agom32r: define ioread* and iowrite* macros
Hirokazu Takata [Wed, 26 Aug 2009 04:04:33 +0000]
m32r: define ioread* and iowrite* macros

Define ioread* and iowrite* macros to fix the following build errors:

CC [M] drivers/uio/uio_smx.o
drivers/uio/uio_smx.c: In function 'smx_handler':
drivers/uio/uio_smx.c:31: error: implicit declaration of function 'ioread32'
drivers/uio/uio_smx.c:37: error: implicit declaration of function 'iowrite32'

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

10 years agom32r: export delay loop symbols
Hirokazu Takata [Wed, 26 Aug 2009 04:09:12 +0000]
m32r: export delay loop symbols

- Move EXPORT_SYMBOL lines of delay loop functions
  from arch/m32r/kernel/m32r_ksyms.c to arch/m32r/lib/delay.c.
- Export __ndelay.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

10 years agom32r: fix tme_handler
Hirokazu Takata [Tue, 11 Aug 2009 14:12:41 +0000]
m32r: fix tme_handler

Fix pmd_bad check code of tme_handler (TLB Miss Exception handler).
The correct _KERNPG_TABLE value is not 0x263(=611) but 0x163.

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>

10 years agoblock: Topology ioctls
Martin K. Petersen [Sat, 3 Oct 2009 18:52:01 +0000]
block: Topology ioctls

Not all users of the topology information want to use libblkid.  Provide
the topology information through bdev ioctls.

Also clarify sector size comments for existing BLK ioctls.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Sat, 3 Oct 2009 18:25:30 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of ssh://master.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (21 commits)
  ALSA: usb - Use strlcat() correctly
  ALSA: Fix invalid __exit in sound/mips/*.c
  ALSA: hda - Fix / improve ALC66x parser
  ALSA: ctxfi: Swapped SURROUND-SIDE mute
  sound: Make keywest_driver static
  ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-B1VP
  ALSA: hda - Fix digita/analog mic auto-switching with IDT codecs
  ASoC: fix kconfig order of Blackfin drivers
  ALSA: hda - Added quirk to enable sound on Toshiba NB200
  ASoC: Fix dependency of CONFIG_SND_PXA2XX_SOC_IMOTE2
  ALSA: Don't assume i2c device probing always succeeds
  ALSA: intel8x0 - Mute External Amplifier by default for Sony VAIO VGN-T350P
  ALSA: echoaudio - Re-enable the line-out control for the Mia card
  ALSA: hda - Resurrect input-source mixer of ALC268 model=acer
  ALSA: hda - Analog Devices AD1984A add HP Touchsmart model
  ALSA: hda - Add HP Pavilion dv4t-1300 to MSI whitelist
  ALSA: hda - CD-audio sound for hda-intel conexant benq laptop
  ASoC: DaVinci: Correct McASP FIFO initialization
  ASoC: Davinci: Fix race with cpu_dai->dma_data
  ASoC: DaVinci: Fix divide by zero error during 1st execution
  ...

10 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Linus Torvalds [Sat, 3 Oct 2009 18:24:19 +0000]
Merge branch 'for_linus' of git://git./linux/kernel/git/tytso/ext4

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  [PATCH] ext4: retry failed direct IO allocations
  ext4: Fix build warning in ext4_dirty_inode()
  ext4: drop ext4dev compat
  ext4: fix a BUG_ON crash by checking that page has buffers attached to it

10 years agocfq-iosched: use assigned slice sync value, not default
Jens Axboe [Sat, 3 Oct 2009 17:46:03 +0000]
cfq-iosched: use assigned slice sync value, not default

We should use the sysfs modified slice sync value, in case it differs
from the default.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agocfq-iosched: rename 'desktop' sysfs entry to 'low_latency'
Jens Axboe [Sat, 3 Oct 2009 17:42:18 +0000]
cfq-iosched: rename 'desktop' sysfs entry to 'low_latency'

Don't think that's necessarily a perfect description of what this
option fiddles with, but it's probably better than 'desktop'.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Sat, 3 Oct 2009 16:31:33 +0000]
Merge branch 'fix/hda' into for-linus

10 years agoMerge branch 'fix/asoc' into for-linus
Takashi Iwai [Sat, 3 Oct 2009 16:31:22 +0000]
Merge branch 'fix/asoc' into for-linus

10 years agocfq-iosched: implement slower async initiate and queue ramp up
Jens Axboe [Sat, 3 Oct 2009 14:26:03 +0000]
cfq-iosched: implement slower async initiate and queue ramp up

This slowly ramps up the async queue depth based on the time
passed since the sync IO, and doesn't allow async at all until
a sync slice period has passed.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agocfq-iosched: delay async IO dispatch, if sync IO was just done
Vivek Goyal [Sat, 3 Oct 2009 13:21:27 +0000]
cfq-iosched: delay async IO dispatch, if sync IO was just done

o Do not allow more than max_dispatch requests from an async queue, if some
  sync request has finished recently. This is in the hope that sync activity
  is still going on in the system and we might receive a sync request soon.
  Most likely from a sync queue which finished a request and we did not enable
  idling on it.

Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agoMerge branch 'misc' into release
Len Brown [Sat, 3 Oct 2009 05:31:37 +0000]
Merge branch 'misc' into release

10 years agoMerge branch 'bugzilla-14081' into release
Len Brown [Sat, 3 Oct 2009 05:31:34 +0000]
Merge branch 'bugzilla-14081' into release

10 years agoACPI: EC: Don't parse DSDT for EC early init on Compal
Alexey Starikovskiy [Fri, 2 Oct 2009 16:21:40 +0000]
ACPI: EC: Don't parse DSDT for EC early init on Compal

Compal DSDT breaks if scanned early, while we need early scan
for almost all ASUS machines. Safest workaround seems to be to
continue do an early scan for all machines, but this Compal model.

http://bugzilla.kernel.org/show_bug.cgi?id=14086

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoACPI: EC: Rewrite DMI checks
Alexey Starikovskiy [Fri, 2 Oct 2009 16:21:33 +0000]
ACPI: EC: Rewrite DMI checks

Use dmi_check_system() for DMI matching.
Don't use string "Notebook" for matching MSI hardware.

http://bugzilla.kernel.org/show_bug.cgi?id=14081

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoSFI: remove __init from sfi_verify_table
Arjan van de Ven [Fri, 2 Oct 2009 14:29:47 +0000]
SFI: remove __init from sfi_verify_table

sfi_verify_table() is called at runtime, and thus cannot be __init

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoACPI: dock: fix "sibiling" typo
Alex Chiang [Thu, 1 Oct 2009 17:59:23 +0000]
ACPI: dock: fix "sibiling" typo

Crossword clues as haikus:

Snakes from the same brood
fighting Jackson on a plane?
sibilant siblings

I guess Will Shortz's job is still secure.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoACPI: kill overly verbose "throttling states" log messages
Roland Dreier [Wed, 30 Sep 2009 20:58:03 +0000]
ACPI: kill overly verbose "throttling states" log messages

I was recently lucky enough to get a 64-CPU system.  The processors
actually have T-states, so my kernel log ends up with 64 lines like:

    ACPI: Processor [CPU0] (supports xx throttling states)

This is pretty useless clutter because

 - this info is already available after boot from
   /proc/acpi/processor/CPUnn/throttling

 - there's also an ACPI_DEBUG_PRINT() in processor_throttling.c that
   gives the same info on boot for anyone who *really* cares.

So just delete the code that prints the throttling states in
processor_core.c.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoSFI: fix section mismatch warnings in sfi_core.c
Rakib Mullick [Wed, 30 Sep 2009 23:09:55 +0000]
SFI: fix section mismatch warnings in sfi_core.c

The function sfi_map_memory/sfi_unmap_memory uses
early_ioremap/early_iounmap respectively, which refers to a __init
function.  And function sfi_check_table also refers to a __init function
sfi_verify_table.  Since the references are valid, so use __ref to get rid
of the warnings.

 We were warned by the following warnings:

  LD      vmlinux.o
  MODPOST vmlinux.o
WARNING: vmlinux.o(.text+0xb6ba3a): Section mismatch in reference from
the function sfi_map_memory() to the function
.init.text:early_ioremap()
The function sfi_map_memory() references
the function __init early_ioremap().
This is often because sfi_map_memory lacks a __init
annotation or the annotation of early_ioremap is wrong.

WARNING: vmlinux.o(.text+0xb6bab6): Section mismatch in reference from
the function sfi_unmap_memory() to the function
.init.text:early_iounmap()
The function sfi_unmap_memory() references
the function __init early_iounmap().
This is often because sfi_unmap_memory lacks a __init
annotation or the annotation of early_iounmap is wrong.

WARNING: vmlinux.o(.text+0xb6be30): Section mismatch in reference from
the function sfi_check_table() to the function
.init.text:sfi_verify_table()
The function sfi_check_table() references
the function __init sfi_verify_table().
This is often because sfi_check_table lacks a __init
annotation or the annotation of sfi_verify_table is wrong.

Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years agoACPI: Fix bound checks for copy_from_user in the acpi /proc code
Arjan van de Ven [Sat, 26 Sep 2009 18:50:25 +0000]
ACPI: Fix bound checks for copy_from_user in the acpi /proc code

The ACPI /proc write() code takes an unsigned length argument like any write()
function, but then assigned it to a *signed* integer called "len".
Only after this is a sanity check for len done to make it not larger than 4.

Due to the type change a len < 0 is in principle also possible; this patch
adds a check for this.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

10 years ago[PATCH] ext4: retry failed direct IO allocations
Eric Sandeen [Sat, 3 Oct 2009 01:20:55 +0000]
[PATCH] ext4: retry failed direct IO allocations

On a 256M filesystem, doing this in a loop:

        xfs_io -F -f -d -c 'pwrite 0 64m' test
        rm -f test

eventually leads to ENOSPC.  (the xfs_io command does a
64m direct IO write to the file "test")

As with other block allocation callers, it looks like we need to
potentially retry the allocations on the initial ENOSPC.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

10 years agoext4: Fix build warning in ext4_dirty_inode()
Curt Wohlgemuth [Sat, 3 Oct 2009 01:08:32 +0000]
ext4: Fix build warning in ext4_dirty_inode()

This fixes the following warning:

fs/ext4/inode.c: In function 'ext4_dirty_inode':
fs/ext4/inode.c:5615: warning: unused variable 'current_handle'

We remove the jbd_debug() statement which does use current_handle, as
it's not terribly important in the grand scheme of things.

Thanks to Stephen Rothwell for pointing this out.

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

10 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Fri, 2 Oct 2009 23:20:43 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm: (25 commits)
  ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7
  ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()
  ARM: 5740/1: fix valid_phys_addr_range() range check
  ARM: 5739/1: ARM: allow empty ATAG_CORE
  ARM: 5735/1: sa1111: CodingStyle cleanups
  ARM: 5738/1: Correct TCM documentation
  ARM: 5734/1: arm: fix compilation of entry-common.S for older CPUs
  ARM: 5733/1: fix bcmring compile error
  ARM: 5732/1: remove redundant include file
  ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3
  ARM: Ensure do_cache_op takes mmap_sem
  ARM: Fix __cpuexit section mismatch warnings
  ARM: Don't allow highmem on SMP platforms without h/w TLB ops broadcast
  ARM: includecheck fix: mach-davinci, board-dm365-evm.c
  ARM: Remove unused CONFIG SA1100_H3XXX
  ARM: Fix warning: unused variable 'highmem'
  ARM: Fix warning: #warning syscall migrate_pages not implemented
  ARM: Fix SA11x0 clocksource warning
  ARM: Fix SA1100 Neponset serial section mismatch
  ARM: Fix SA1100 Assabet/Neponset PCMCIA section mismatch warnings
  ...

10 years agoARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7
Kirill A. Shutemov [Fri, 25 Sep 2009 12:40:49 +0000]
ARM: 5728/1: Proper prefetch abort handling on ARMv6 and ARMv7

Currently, on ARMv6 and ARMv7, if an application tries to execute
code (or garbage) on non-executable page it hangs. It caused by
incorrect prefetch abort handling. Now every prefetch abort
processes as a translation fault.

To fix this we have to analyze instruction fault status register
to figure out reason why we've got the abort and process it
accordingly.

To make IFSR different from DFSR we set bit 31 which is reserved in
both IFSR and DFSR.

This patch also tries to protect from future hangs on unexpected
exceptions. An application will be killed if unexpected exception
type was received.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 5727/1: Pass IFSR register to do_PrefetchAbort()
Kirill A. Shutemov [Fri, 25 Sep 2009 12:39:47 +0000]
ARM: 5727/1: Pass IFSR register to do_PrefetchAbort()

Instruction fault status register, IFSR, was introduced on ARMv6 to
provide status information about the last insturction fault. It
needed for proper prefetch abort handling.

Now we have three prefetch abort model:

  * legacy - for CPUs before ARMv6. They doesn't provide neither
    IFSR nor IFAR. We simulate IFSR with section translation fault
    status for them to generalize code;
  * ARMv6 - provides IFSR, but not IFAR;
  * ARMv7 - provides both IFSR and IFAR.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 5740/1: fix valid_phys_addr_range() range check
Greg Ungerer [Thu, 1 Oct 2009 23:45:28 +0000]
ARM: 5740/1: fix valid_phys_addr_range() range check

Commit 1522ac3ec95ff0230e7aa516f86b674fdf72866c
("Fix virtual to physical translation macro corner cases")
breaks the end of memory check in valid_phys_addr_range().
The modified expression results in the apparent /dev/mem size
being 2 bytes smaller than what it actually is.

This patch reworks the expression to correctly check the address,
while maintaining use of a valid address to __pa().

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 5739/1: ARM: allow empty ATAG_CORE
David Brown [Thu, 1 Oct 2009 16:43:29 +0000]
ARM: 5739/1: ARM: allow empty ATAG_CORE

From: David Brown <davidb@quicinc.com>

The ATAG_CORE is allowed to be empty.  Although this is handled
by parse_tag_core(), __vet_atags during startup rejects this tag
unless it contains data.  Allow the initial tag to be either the
full size, or empty.

Signed-off-by: David Brown <davidb@quicinc.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoARM: 5735/1: sa1111: CodingStyle cleanups
Hartley Sweeten [Tue, 29 Sep 2009 22:49:02 +0000]
ARM: 5735/1: sa1111: CodingStyle cleanups

EXPORT_* macros should follow immediately after the closing function
brace line.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

10 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/xscaleiop
Russell King [Fri, 2 Oct 2009 21:31:04 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/djbw/xscaleiop

Conflicts:
MAINTAINERS

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Fri, 2 Oct 2009 20:37:18 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (46 commits)
  cnic: Fix NETDEV_UP event processing.
  uvesafb/connector: Disallow unpliviged users to send netlink packets
  pohmelfs/connector: Disallow unpliviged users to configure pohmelfs
  dst/connector: Disallow unpliviged users to configure dst
  dm/connector: Only process connector packages from privileged processes
  connector: Removed the destruct_data callback since it is always kfree_skb()
  connector/dm: Fixed a compilation warning
  connector: Provide the sender's credentials to the callback
  connector: Keep the skb in cn_callback_data
  e1000e/igb/ixgbe: Don't report an error if devices don't support AER
  net: Fix wrong sizeof
  net: splice() from tcp to pipe should take into account O_NONBLOCK
  net: Use sk_mark for routing lookup in more places
  sky2: irqname based on pci address
  skge: use unique IRQ name
  IPv4 TCP fails to send window scale option when window scale is zero
  net/ipv4/tcp.c: fix min() type mismatch warning
  Kconfig: STRIP: Remove stale bits of STRIP help text
  NET: mkiss: Fix typo
  tg3: Remove prev_vlan_tag from struct tx_ring_info
  ...

10 years agocfq-iosched: add a knob for desktop interactiveness
Jens Axboe [Fri, 2 Oct 2009 17:27:04 +0000]
cfq-iosched: add a knob for desktop interactiveness

This is basically identical to what Vivek Goyal posted, but combined
into one and labelled 'desktop' instead of 'fairness'. The goal
is to continue to improve on the latency side of things as it relates
to interactiveness, keeping the questionable bits under this sysfs
tunable so it would be easy for throughput-only people to turn off.

Apart from adding the interactive sysfs knob, it also adds the
behavioural change of allowing slice idling even if the hardware
does tagged command queuing.

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

10 years agocnic: Fix NETDEV_UP event processing.
Michael Chan [Fri, 2 Oct 2009 18:03:28 +0000]
cnic: Fix NETDEV_UP event processing.

This fixes the problem of not handling the NETDEV_UP event properly
during hot-plug or modprobe of bnx2 after cnic.  The handling was
skipped by mistakenly using "else if" to check for the event.

Also update version to 2.0.1.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Benjamin Li <benli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>