12 years ago[ALSA] hda-codec - Add support for HP Spartan
Claudio Matsuoka [Tue, 3 Jul 2007 18:05:19 +0000]
[ALSA] hda-codec - Add support for HP Spartan

Added the model for HP Spartan with Conexant codec chip.
From: Claudio Matsuoka <cmatsuoka@gmail.com>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] usb-audio - Add quirk for Roland Juno-G
Claudio Matsuoka [Tue, 3 Jul 2007 18:07:39 +0000]
[ALSA] usb-audio - Add quirk for Roland Juno-G

Added a quirk for Roland Juno-G.  It's simply a copy of Fantom-X with the
IDs changed.
From: Claudio Matsuoka <cmatsuoka@gmail.com>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Add PS3 sound driver
Masakazu Mokuno [Tue, 3 Jul 2007 10:54:49 +0000]
[ALSA] Add PS3 sound driver

The patch adds the support for the sound feature of PS3 - the digital
output of HDMI and SPDIF optical, and the analog output of AV multi.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] usb-audio: add Roland SH-201 support
Carlo Beccaria [Tue, 3 Jul 2007 06:04:25 +0000]
[ALSA] usb-audio: add Roland SH-201 support

Add quirks to detect the Roland SH-201.

Signed-off-by: Carlo Beccaria <carlo@beccaria.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Fix the error in DAC assignment of STAC codec
Takashi Iwai [Mon, 2 Jul 2007 17:18:00 +0000]
[ALSA] hda-codec - Fix the error in DAC assignment of STAC codec

The STAC codec support code has the automatic recognition of
additional side-output pins, and this may result in an error when
the assigned pin has no corresponding DAC connection.
The patch fixes the problem -- it corrects the line_outs again
without such additional pins.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] sound/pci/hda/patch_realtek.c: remove dead code
Adrian Bunk [Mon, 2 Jul 2007 14:03:12 +0000]
[ALSA] sound/pci/hda/patch_realtek.c: remove dead code

This patch removes some dead code spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] portman2x4 section mismatch
Randy Dunlap [Wed, 27 Jun 2007 09:52:39 +0000]
[ALSA] portman2x4 section mismatch

FIx section mismatch when CONFIG_HOTPLUG=n:
WARNING: sound/built-in.o(.exit.text+0x271): Section mismatch: reference to .init.text:snd_p
ortman_unregister_all (between 'snd_portman_module_exit' and 'alsa_mpu401_uart_exit')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] fix ensoniq section mismatch
Randy Dunlap [Tue, 26 Jun 2007 09:43:52 +0000]
[ALSA] fix ensoniq section mismatch

Fix ensoniq driver sections when HOTPLUG=n, but code is used
during resume, so it cannot be discarded:
WARNING: sound/pci/snd-ens1371.o(.text+0x5c0): Section mismatch: reference to .init.text: (between 'snd_ensoniq_chip_init' and 'snd_ensoniq_free')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] HDA - Change default configuration for Fujitsu Si3515
Tobin Davis [Mon, 25 Jun 2007 10:14:25 +0000]
[ALSA] HDA - Change default configuration for Fujitsu Si3515

This patch changes the default configuration for the Fujitsu Siemens
Si3515 Laptop to the correct model=laptop.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda: support for S/PDIF out on ASUS M2V
Mike Crash [Mon, 25 Jun 2007 10:12:51 +0000]
[ALSA] hda: support for S/PDIF out on ASUS M2V

Added support for S/PDIF digital output on ASUS M2V motheboard - added
new model '3stack-660-digout' and ALC660VD_3ST_DIG

Signed-off-by: Mike Crash <mike@mikecrash.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Fix invalid schedule_timeout_interruptible()
Takashi Iwai [Mon, 25 Jun 2007 10:09:32 +0000]
[ALSA] Fix invalid schedule_timeout_interruptible()

Fixed the invalid use of schedule_timeout_interruptible() without
checking pending signals.  Simply replaced with schedule_timeout().
Suggestions thanks to Jeff Garzik.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] more section mismatches
Randy Dunlap [Mon, 25 Jun 2007 10:08:01 +0000]
[ALSA] more section mismatches

Something about __init_or_module isn't working as expected (?).
CONFIG_HOTPLUG=y
CONFIG_MODULES=n
Fix shared init/exit code helper:
WARNING: sound/built-in.o(.exit.text+0x243): Section mismatch: reference to .init.text: (between 'alsa_card_mpu401_exit' and 'ac97_bus_exit')
WARNING: sound/built-in.o(.exit.text+0x21b): Section mismatch: reference to .init.text: (between 'alsa_card_dummy_exit' and 'alsa_card_serial_exit')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] fix section mismatch
Randy Dunlap [Mon, 25 Jun 2007 10:07:38 +0000]
[ALSA] fix section mismatch

Fix shared init/exit function attributes:
WARNING: sound/built-in.o(.exit.text+0x4a1): Section mismatch: reference to .init.text: (between 'alsa_card_virmidi_exit' and 'alsa_card_serial_exit')
WARNING: sound/built-in.o(.exit.text+0x4c1): Section mismatch: reference to .init.text: (between 'alsa_card_serial_exit' and 'ac97_bus_exit')

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add AD1882 codec support
Takashi Iwai [Wed, 20 Jun 2007 13:46:13 +0000]
[ALSA] hda-codec - Add AD1882 codec support

Added AD1882 codec support.  It has currently two models, 3stack and
6stack.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Output MFG information for HDA devices
Jonathan Phenix [Tue, 19 Jun 2007 16:31:28 +0000]
[ALSA] hda-codec - Output MFG information for HDA devices

This patch output information about the MFG (Modem Function Group) to
the /proc/asound/card?/codec#? file. This information is important to
identify if a HDA device has a modem or not.

Signed-off-by: Jonathan Phenix <jonathan@linuxant.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda: add eapd support to additional idt codecs
Matthew Ranostay [Tue, 19 Jun 2007 14:48:28 +0000]
[ALSA] hda: add eapd support to additional idt codecs

Added support for EAPD on the 927x, and 9227-8 IDT HDA codecs.
Enabling EAPD powers the internal speaker amp otherwise there is no
sound on systems with an internal amp.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add model dell for Dell XPS M1210
Takashi Iwai [Tue, 19 Jun 2007 10:17:42 +0000]
[ALSA] hda-codec - Add model dell for Dell XPS M1210

Added a new model 'dell' for Dell XPS M1210 with STAC922x codec chip.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add Fujitsu Siemens v3515 support to patch_conexant
Tobin Davis [Tue, 19 Jun 2007 10:13:32 +0000]
[ALSA] hda-codec - Add Fujitsu Siemens v3515 support to patch_conexant

This patch adds support for the Fujitsu Seimens Amilo Pro v3515 notebook.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ASoC S3C24xx machine drivers - lm4857-h missing patch
Graeme Gregory [Tue, 19 Jun 2007 10:12:33 +0000]
[ALSA] ASoC S3C24xx machine drivers - lm4857-h missing patch

Somewhere when dealing with the s3c24xx patches and requested changes I
managed to miss this file on re-submission.
Its a header file required for compilation of neo1973-wm8573.c and
should be a no brainer.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Fix ALC662 auto-configuration code
Takashi Iwai [Tue, 19 Jun 2007 10:11:16 +0000]
[ALSA] hda-codec - Fix ALC662 auto-configuration code

The auto-configuration code didn't initialize the verbs correctly.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add model for Toshiba A135
Takashi Iwai [Thu, 14 Jun 2007 10:58:23 +0000]
[ALSA] hda-codec - Add model for Toshiba A135

Added model=lenovo for Toshiba A135 with ALC861VD codec.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add HP Pavillion quirk to Realtek code
Tobin Davis [Tue, 12 Jun 2007 09:27:46 +0000]
[ALSA] hda-codec - Add HP Pavillion quirk to Realtek code

This patch adds the HP Pavillion a1589L desktop system to the ALC883
configuration table.

Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ali5451 warning fix
Andrew Morton [Mon, 11 Jun 2007 10:23:31 +0000]
[ALSA] ali5451 warning fix

sound/pci/ali5451/ali5451.c: In function 'snd_ali_prepare':
sound/pci/ali5451/ali5451.c:716: warning: 'R2' may be used uninitialized in this function

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] emu10k1 - EMU 1212 with 16 capture channels
Pavel Hofman [Mon, 11 Jun 2007 10:21:20 +0000]
[ALSA] emu10k1 - EMU 1212 with 16 capture channels

* adding 8 more 32-bit capture channels (total of 16) for emu1010 cards
* adding some code comments and card details description

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Add the MCP73/77 support to hda_intel driver
Peer Chen [Fri, 8 Jun 2007 11:55:10 +0000]
[ALSA] Add the MCP73/77 support to hda_intel driver

Add the MCP73/MCP77 support to hda driver.
The patch base on kernel 2.6.22-rc4

Signed-off-by: Peer Chen <peerchen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Fix Thinkpad X61/T61 outputs
Takashi Iwai [Fri, 8 Jun 2007 10:25:25 +0000]
[ALSA] hda-codec - Fix Thinkpad X61/T61 outputs

Enable EAPD bit on Thinkpad X61/T61.  The recent model requires it
explicitly to make any sounds.   In future, it should be toggled
automatically on demand.
Also, added a beep volume/switch.  Some people like it although I
don't understand why :)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] soc/sh: let SND_SOC_PCM_SH7760 depend on SH_DMABRG
Manuel Lauss [Fri, 8 Jun 2007 09:41:34 +0000]
[ALSA] soc/sh: let SND_SOC_PCM_SH7760 depend on SH_DMABRG

Let SND_SOC_PCM_SH7760 depend on SH_DMABRG rather than select'ing it.
Gets rid of the Kbuild warning about SH_DMABRG being undefined on non-sh
builds.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add quirk for another MSI laptop to alc883_cfg_tbl[]
Daniel T Chen [Fri, 8 Jun 2007 09:39:35 +0000]
[ALSA] hda-codec - Add quirk for another MSI laptop to alc883_cfg_tbl[]

This hg commit adds the SSID of another MSI laptop to the
alc883_cfg_tbl[] quirk list.  Verified in #alsa/Freenode
on Thu, Jun 7, 2007.

Signed-off-by: Daniel T Chen <crimsun@ubuntu.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Yet another Uniwill laptop with ALC861 codec
Dave Jones [Wed, 6 Jun 2007 12:48:52 +0000]
[ALSA] Yet another Uniwill laptop with ALC861 codec

From: Dave Jones <davej@redhat.com>
Rediffed version of the patch from ..
http://bugzilla.kernel.org/show_bug.cgi?id=8016
that seems to be lingering for some time.
Original patch by: Andy Shevchenko <andy@smile.org.ua>

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add support of ALC268 codec
Kailang Yang [Tue, 5 Jun 2007 10:30:55 +0000]
[ALSA] hda-codec - Add support of ALC268 codec

Added the support of new ALC268 codec chip.

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add proper model for HP xw series
Kailang Yang [Tue, 5 Jun 2007 10:17:21 +0000]
[ALSA] hda-codec - Add proper model for HP xw series

Set the proper model for HP xw4550, xw4600, xw6600 and xw8600.

Signed-off-by: Kailang Yang <kailang@realtek.com.tw>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Fix AD1984 basic model
Takashi Iwai [Tue, 5 Jun 2007 10:13:34 +0000]
[ALSA] hda-codec - Fix AD1984 basic model

Fix the amp direction of digital mic capture volume mixer, which
resulted in -EINVAL.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] More description on duplex streams with OSS emulation
Alan Horstmann [Mon, 4 Jun 2007 21:11:23 +0000]
[ALSA] More description on duplex streams with OSS emulation

Add paragraph to the OSS document to clarify correct use of duplex streams.

Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Fix Oops with AD1984 thinkpad model
Takashi Iwai [Mon, 4 Jun 2007 16:32:23 +0000]
[ALSA] hda-codec - Fix Oops with AD1984 thinkpad model

Fixed Oops with AD1984 thinkpad model.  Also fixed the wrong
init verbs for NID 0x03 and 0x04, which have apparently no mute
bit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] rme9652 - Fix the hw_pointer check
Takashi Iwai [Wed, 30 May 2007 10:46:21 +0000]
[ALSA] rme9652 - Fix the hw_pointer check

The negative check in hw_pointer callback doesn't work because the
value is unsigned.  Cast to int in the comparison to fix this.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ali5451 - Fix invalid type of codec->irq field
Takashi Iwai [Wed, 30 May 2007 10:42:31 +0000]
[ALSA] ali5451 - Fix invalid type of codec->irq field

The irq field of struct snd_ali shouldn't be unsigned since it's
uninitialized value is -1.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Fix STAC922x capture boost level
Takashi Iwai [Tue, 29 May 2007 17:01:37 +0000]
[ALSA] hda-codec - Fix STAC922x capture boost level

STAC922x provides the capture boost level up to 4, but actually it
works only up to 2.  Since the range of the mixer is automatically
defined from amp-capability bits, we need to override the value
beforehand.  snd_hda_override_amp_caps() is introduced for this
purpose.
The function patch_stac922x() calls this for NID 0x12 (Mux Capture
Volume).  This should fix another recording problem on Intel Macs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Fix pin configs for Intel Macs
Ivan N. Zlatev [Tue, 29 May 2007 14:03:00 +0000]
[ALSA] hda-codec - Fix pin configs for Intel Macs

* adds the pinconfigs for all 5 Apple boards and 14 Subsystem IDs
  (support for possibly all iMac, Mac, MacMini etc etc)
* adds 'intel-mac-v1' to v5 models which replace the current
* reflects changes in Alsa-Configuration.txt

Signed-off-by: Ivan N. Zlatev <contact@i-nz.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Disable debugging output for the ALS300 driver
Ash Willis [Tue, 29 May 2007 12:34:17 +0000]
[ALSA] Disable debugging output for the ALS300 driver

Disables debugging output in the ALS300 driver.
Also contains a whitespace cleanup and a fix for a potential bug.

Signed-off-by: Ash Willis <ashwillis@programmer.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Fix SB-module dependency with PCI drivers
Takashi Iwai [Fri, 25 May 2007 09:50:33 +0000]
[ALSA] Fix SB-module dependency with PCI drivers

A few PCI drivers like ALS4000 and CS5530 require the SB16-codes.
This patch fixes / improves the dependency between SB modules and
PCI drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Add support for Cyrix/NatSemi Geode CS5530 (VSA1)
Takashi Iwai [Thu, 24 May 2007 16:46:54 +0000]
[ALSA] Add support for Cyrix/NatSemi Geode CS5530 (VSA1)

Add support for Cyrix/NatSemi Geode SC5530 (VSA1).
The driver is snd-cs5530.
Signed-off-by Ash Willis <ashwillis@programmer.net>

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Fix wrong mixer controls for AD1984 thinkpad model
Takashi Iwai [Wed, 23 May 2007 14:27:32 +0000]
[ALSA] hda-codec - Fix wrong mixer controls for AD1984 thinkpad model

Fixed the wrong mixer controls for AD1984 thinkpad model.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add support of newer version of Intel iMac
Takashi Iwai [Mon, 21 May 2007 10:41:29 +0000]
[ALSA] hda-codec - Add support of newer version of Intel iMac

Added the pin configs for newer version of Intel iMac.
The information provided by Ivan N. Zlatev <contact@i-nz.net>.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ice1724 - Add PCM Playback Switch to Revo 7.1
Pavel Hofman [Sat, 19 May 2007 15:21:04 +0000]
[ALSA] ice1724 - Add PCM Playback Switch to Revo 7.1

This patch adds the support of mute for front channels of M-Audio
Revolution 7.1 (the DAC AK4381 features a mute bit).

Signed-off-by: Pavel Hofman <dustin@seznam.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Add description about probe_mask option for snd-hda-intel
Takashi Iwai [Sat, 19 May 2007 15:06:42 +0000]
[ALSA] Add description about probe_mask option for snd-hda-intel

Added a brief description about probe_mask option for snd-hda-intel.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] hda-codec - Add AD1884 / AD1984 codec support
Takashi Iwai [Fri, 18 May 2007 16:21:41 +0000]
[ALSA] hda-codec - Add AD1884 / AD1984 codec support

Added the support of AD1884 and AD1984 codec chips.
Also experimental quirks for Thinkpad T61/X61 laptops with AD1984.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Add ALSA support for the SEGA Dreamcast PCM device
Adrian McMenamin [Fri, 18 May 2007 12:26:59 +0000]
[ALSA] Add ALSA support for the SEGA Dreamcast PCM device

ALSA support for the SEGA Dreamcast Yamaha AICA sound device (pcm)
This patch adds ALSA sound support for pcm playback on two channels on
the SEGA Dreamcast built-in sound device (the Yamaha AICA)
Add driver for the AICA sound device built into the SEGA Dreamcast
Hook it all up with the build system.

Signed-off-by: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] SH7760 ASoC support
Manuel Lauss [Mon, 14 May 2007 16:40:07 +0000]
[ALSA] SH7760 ASoC support

ALSA ASoC support for SH7760
This patch adds ALSA ASoC drivers for the Audio interfaces
of the SH7760 SoC:
Add driver for the SH7760 DMA engine (dmabrg)
Add AC97 driver for HAC unit(s) found on SH7760/SH7780
Add I2S driver for SSI unit(s) found on SH7760/SH7780
Add a generic SH7760-AC97 machine driver.
Hook it all up with the build system.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ASoC S3C24xx machine drivers - Kconfig
Graeme Gregory [Mon, 14 May 2007 09:06:11 +0000]
[ALSA] ASoC S3C24xx machine drivers - Kconfig

This patch adds Kconfig and build support for the Neo1973, SMDK2443 and
S3C2443 AC97 ALSA audio drivers.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ASoC S3C24xx machine drivers - I2C ID for LM4857
Liam Girdwood [Mon, 14 May 2007 09:05:09 +0000]
[ALSA] ASoC S3C24xx machine drivers - I2C ID for LM4857

This patch adds I2C ID for the LM4857 audio amp and corrects the spacing
of the WM8731, WM8750 and WM8753 ID's.

Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ASoC S3C24xx machine drivers - SMDK 2443
Graeme Gregory [Mon, 14 May 2007 09:04:34 +0000]
[ALSA] ASoC S3C24xx machine drivers - SMDK 2443

This patch adds ALSA support for the SMDK2443 reference board.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ASoC S3C24xx machine drivers - Openmoko Neo1973
Graeme Gregory [Mon, 14 May 2007 09:03:52 +0000]
[ALSA] ASoC S3C24xx machine drivers - Openmoko Neo1973

This patch adds ALSA support for the Openmoko Neo1973 phone. Features:-
 * HiFi Playback and capture.
 * Phone calls supported.
 * Support for BT PCM in WM8753 voice interface.
 * Support for LM4857 audio amp.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] ASoC S3C24xx machine drivers - s3c2443-AC97
Graeme Gregory [Mon, 14 May 2007 09:02:51 +0000]
[ALSA] ASoC S3C24xx machine drivers - s3c2443-AC97

This patch adds AC97 support to the Samsung S3C2443 CPU.

Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] usbusx2yaudio: kfree(NULL) is valid
Richard Knutsson [Mon, 14 May 2007 08:38:57 +0000]
[ALSA] usbusx2yaudio: kfree(NULL) is valid

if (!x) kfree(x); is not needed since kfree(NULL) is valid.

Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] usb-audio: another Logitech QuickCam ID
Daniel Drake [Thu, 10 May 2007 06:52:19 +0000]
[ALSA] usb-audio: another Logitech QuickCam ID

This patch adds the ID for another quickcam microphone, reported by freqmod
on ALSA ticket #0003040
I'm going to submit a USB patch separately to provide a macro to simplify these
entries, as suggested by Alan Stern. We could switch to using that in future.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years ago[ALSA] Fix unfreed pnp driver in opti9xx ISA driver
Takashi Iwai [Wed, 20 Jun 2007 10:03:09 +0000]
[ALSA] Fix unfreed pnp driver in opti9xx ISA driver

- Added the missing pnp_unregister_card_driver() in the case ISA PnP
  isn't found, which caused an error at kobject_add with -EEXIST
   Jun 11 09:07:31 rain kernel: kobject_add failed for opti9xx with -EEXIST, don't try to register things with the same name in the same directory.
   Jun 11 09:07:31 rain kernel:  [<c01c18fa>] kobject_shadow_add+0x12a/0x1c0
   Jun 11 09:07:31 rain kernel:  [<c01c1a81>] kobject_register+0x21/0x50
   Jun 11 09:07:31 rain kernel:  [<c01f09a2>] bus_add_driver+0x72/0x1b0
   Jun 11 09:07:31 rain kernel:  [<c01d3dff>] pnp_register_card_driver+0x4f/0xc0
   Jun 11 09:07:31 rain kernel:  [<c89bc00a>] alsa_card_opti9xx_init+0xa/0x25 [snd_opti92x_ad1848]
   Jun 11 09:07:31 rain kernel:  [<c0136947>] sys_init_module+0x157/0x1610
   Jun 11 09:07:31 rain kernel:  [<c01029b4>] syscall_call+0x7/0xb
- Fixed the probe behavior when no PnP is set up.  Now it behaves
  like the former version.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>

12 years agoMerge branch 'kmem_death' of master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Fri, 20 Jul 2007 01:38:13 +0000]
Merge branch 'kmem_death' of /linux/kernel/git/lethal/sh-2.6

* 'kmem_death' of master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  mm: Remove slab destructors from kmem_cache_create().

12 years agofallout from kbuild changes
Al Viro [Fri, 20 Jul 2007 01:01:16 +0000]
fallout from kbuild changes

Change in 'kbuild: do section mismatch check on full vmlinux'
should've been replicated in arch/um/Makefile.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomm: Remove slab destructors from kmem_cache_create().
Paul Mundt [Fri, 20 Jul 2007 01:11:58 +0000]
mm: Remove slab destructors from kmem_cache_create().

Slab destructors were no longer supported after Christoph's
c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been
BUGs for both slab and slub, and slob never supported them
either.

This rips out support for the dtor pointer from kmem_cache_create()
completely and fixes up every single callsite in the kernel (there were
about 224, not including the slab allocator definitions themselves,
or the documentation references).

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

12 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6
Linus Torvalds [Thu, 19 Jul 2007 23:31:22 +0000]
Merge /pub/scm/linux/kernel/git/bart/ide-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/bart/ide-2.6: (23 commits)
  ide: add support for SCSI ioctls to ide-floppy
  ide: remove stale changelog from setup-pci.c
  ide: remove stale changelog/comments/TODO from ide.c
  ide-cris: handle PIO auto-tuning in tune_cris_ide()
  ide: add PIO masks
  ide: remove ide_find_best_pio_mode()
  ide: drop "PIO data" argument from ide_get_best_pio_mode()
  ide: ide_find_best_pio_mode() fixes (take 2)
  ide: add ide_pio_cycle_time() helper (take 2)
  sc1200: remove stale Power Management code
  ide: ide_start_power_step() fix WRT disabling DMA
  serverworks: fix DMA
  serverworks: always tune PIO
  ide: add ide_pci_device_t.host_flags (take 2)
  ide: add ide_dev_has_iordy() helper (take 4)
  ide: make ide_get_best_pio_mode() print info if overriding PIO mode
  siimage: PIO mode setup fixes (take 2)
  atiixp: PIO mode setup fixes
  ide: Stop mapping ROMs
  IDE: Remove references to dead ETRAX-related variables.
  ...

12 years agocoda breakage
Al Viro [Thu, 19 Jul 2007 23:23:31 +0000]
coda breakage

a) switch by loff_t == __cmpdi2 use.  Replaced with a couple
of obvious ifs; update of ->f_pos in the first one makes sure that we
do the right thing in all cases.
b) block_signals() and unblock_signals() are globals on UML.
Renamed coda ones; in principle UML probably ought to do rename as
well, but that's another story.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agomissed cong_avoid() instance
Al Viro [Thu, 19 Jul 2007 23:17:45 +0000]
missed cong_avoid() instance

Removal of rtt argument in ->cong_avoid() had missed tcp_htcp.c
instance.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoide: add support for SCSI ioctls to ide-floppy
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:59 +0000]
ide: add support for SCSI ioctls to ide-floppy

Now that ide-floppy supports SG_IO we can add support for SCSI ioctls
(except deprecated SCSI_IOCTL_SEND_COMMAND and legacy CDROM_SEND_PACKET
ones - we can add them later iff really needed).

While at it remove handling of CDROMEJECT and CDROMCLOSETRAY ioctls from
generic_ide_ioctl():

- This prevents ide-{disk,tape,scsi} device drivers from obtaining
  REQ_TYPE_BLOCK_PC type requests which are currently unsupported by
  these drivers and which are potentially harmful (as reported by Andrew).

- There is no functionality loss since aforementioned ioctls will now be
  handled by idefloppy_ioctl()->scsi_cmd_ioctl() (for devices using
  ide-floppy driver) and by idecd_ioctl->cdrom_ioctl()->scsi_cmd_ioctl()
  (for devices using ide-cd driver).

Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove stale changelog from setup-pci.c
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:59 +0000]
ide: remove stale changelog from setup-pci.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove stale changelog/comments/TODO from ide.c
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:59 +0000]
ide: remove stale changelog/comments/TODO from ide.c

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide-cris: handle PIO auto-tuning in tune_cris_ide()
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:59 +0000]
ide-cris: handle PIO auto-tuning in tune_cris_ide()

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add PIO masks
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:59 +0000]
ide: add PIO masks

* Add ATA_PIO[0-6] defines to <linux/ata.h>.

* Add ->pio_mask field to ide_pci_device_t and ide_hwif_t.

* Add PIO masks to host drivers.

<linux/ata.h> change ACK-ed by Jeff Garzik <jeff@garzik.org>.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: remove ide_find_best_pio_mode()
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:58 +0000]
ide: remove ide_find_best_pio_mode()

* Add ->host_flags to ide_hwif_t to store ide_pci_device_t.host_flags,
  assign it in setup-pci.c:ide_pci_setup_ports().

* Add IDE_HFLAG_PIO_NO_{BLACKLIST,DOWNGRADE} to ide_pci_device_t.host_flags
  and teach ide_get_best_pio_mode() about them.  Also remove needless
  !drive->id check while at it (drive->id is always present).

* Convert amd74xx, via82cxxx and ide-timing.h to use ide_get_best_pio_mode()
  and then remove no longer needed ide_find_best_pio_mode().

There should be no functionality changes caused by this patch.

Acked-by: Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: drop "PIO data" argument from ide_get_best_pio_mode()
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:58 +0000]
ide: drop "PIO data" argument from ide_get_best_pio_mode()

* Drop no longer needed "PIO data" argument from ide_get_best_pio_mode()
  and convert all users accordingly.

* Remove no longer needed ide_pio_data_t.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: ide_find_best_pio_mode() fixes (take 2)
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:57 +0000]
ide: ide_find_best_pio_mode() fixes (take 2)

* Check IORDY bit for PIO modes > 2.

* Some devices claim maximum PIO mode > 2 in id->tPIO, they were punished too
  severly for this by being limited to PIO_SLOW.  Limit them to PIO2 instead.

v2:
* Fix PIO number being returned incorrectly instead of PIO mode
  (Noticed by Sergei).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add ide_pio_cycle_time() helper (take 2)
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:56 +0000]
ide: add ide_pio_cycle_time() helper (take 2)

* Add ide_pio_cycle_time() helper.

* Use it in ali14xx/ht6560b/qd65xx/cmd64{0,x}/sl82c105 and pmac host drivers
  (previously cycle time given by the device was only used for "pio" == 255).

* Remove no longer needed ide_pio_data_t.cycle_time field.

v2:
* Fix "ata_" prefix (Noticed by Jeff).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agosc1200: remove stale Power Management code
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:56 +0000]
sc1200: remove stale Power Management code

* Nowadays core IDE code handles restoring of PIO and DMA modes
  (ide-io.c:ide_start_power_step() etc) so remove open-coded version
  from sc1200_resume().

  There should be no change in behavior because settings done by
  sc1200_resume() were always overridden by generic_ide_resume()
  and ide_{start,stop}_power_step().

* Bump driver version.

Cc: Mark Lord <mlord@pobox.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: ide_start_power_step() fix WRT disabling DMA
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:56 +0000]
ide: ide_start_power_step() fix WRT disabling DMA

* Do the same thing as probe_hwif() and always disable DMA so chipset DMA
  enabled bit gets cleared (if the drive doesn't support DMA ide_set_dma()
  won't try to tune it anyway).

* Add TODO comment about respecting ->using_dma setting.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoserverworks: fix DMA
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:56 +0000]
serverworks: fix DMA

The driver used to depend on BIOS settings for deciding whether it is OK
to use DMA.  However it seems that BIOS doesn't always handle all cases
correctly so just let IDE core to decide about this.  It should be a safe
thing to do now, after the driver went through heavy bugfixing.

Thanks for bugreport and testing the patch goes out to Sven Niedner.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoserverworks: always tune PIO
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:56 +0000]
serverworks: always tune PIO

* Always set ->autotune so PIO gets correctly auto-tuned (previously
  ->autotune was only set when ->dma_base wasn't available, however
  ->ide_dma_check()/->speedproc() was always trying to tune PIO when
  tuning DMA).

* Move code responsible for programming chipset for PIO mode from
  svwks_tune_chipset() to svwks_tune_pio().  Don't tune PIO when tuning
  DMA (this is no longer needed since ->autotune is always set now).

* Handle PIO modes early in svwks_tune_chipset() so DMA configuration
  registers don't get cleared when programming PIO mode.

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add ide_pci_device_t.host_flags (take 2)
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:55 +0000]
ide: add ide_pci_device_t.host_flags (take 2)

* Rename ide_pci_device_t.flags to ide_pci_device_t.host_flags
  and IDEPCI_FLAG_ISA_PORTS flag to IDE_HFLAG_ISA_PORTS.

* Add IDE_HFLAG_SINGLE flag for single channel devices.

* Convert core code and all IDE PCI drivers to use IDE_HFLAG_SINGLE
  and remove no longer needed ide_pci_device_t.channels field.

v2:
* Fix issues noticed by Sergei:
  - correct code alignment in scc_pata.c
  - s/IDE_HFLAG_SINGLE/~IDE_HFLAG_SINGLE/ in serverworks.c

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: add ide_dev_has_iordy() helper (take 4)
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:55 +0000]
ide: add ide_dev_has_iordy() helper (take 4)

* Add ide_dev_has_iordy() helper and use it sl82c105 host driver.

* Remove no longer needed ide_pio_data_t.use_iordy field.

v2/v3:
* Fix issues noticed by Sergei:
  - correct patch description
  - fix comment in ide_get_best_pio_mode()

v4:
* Fix "ata_" prefix (Noticed by Jeff).

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: make ide_get_best_pio_mode() print info if overriding PIO mode
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:55 +0000]
ide: make ide_get_best_pio_mode() print info if overriding PIO mode

* Print info about overriding PIO mode in ide_get_best_pio_mode().

* Remove info about overriding PIO mode from cmd64{0,x} host drivers.

* Remove no longer needed ide_pio_data_t.overridden field.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agosiimage: PIO mode setup fixes (take 2)
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:54 +0000]
siimage: PIO mode setup fixes (take 2)

* Add sil_tuneproc() wrapper for siimage_tuneproc() which also sets
  PIO mode on the device.

* Add missing ide_get_best_pio_mode() call to sil_tuneproc() so
  "pio" == 255 (autotune) is handled correctly (previously PIO0 was used)
  and "pio" values > 4 && < 255 are filtered to PIO4 (instead of PIO0).

* Add code limiting maximum PIO mode according to the pair device capabilities
  to sil_tuneproc().

* Convert users of config_siimage_chipset_for_pio() to use sil_tune_pio() and
  sil_tuneproc().  This fixes PIO fallback in siimage_config_drive_for_dma() to
  use max PIO mode available instead of PIO4 (config_siimage_chipset_for_pio()
  used wrong arguments for ide_get_best_pio_mode() and as a results always
  tried to set PIO4).

* Remove no longer needed siimage_taskfile_timing()
  and config_siimage_chipset_for_pio().

* Enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes
  from siimage_speedproc()

* Bump driver version.

v2:
* Fix issues noticed by Sergei:
  - correct pair device check
  - trim only taskfile PIO to the slowest of the master/slave
  - enable ->autotune unconditionally and remove PIO tuning for UDMA/MDMA modes
    from siimage_speedproc()
  - add TODO item for IORDY bugs
  - minor cleanups

Reviewed-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoatiixp: PIO mode setup fixes
Bartlomiej Zolnierkiewicz [Thu, 19 Jul 2007 23:11:54 +0000]
atiixp: PIO mode setup fixes

* Split off exisiting atiixp_tuneproc() into atiixp_tune_pio()
  and then add setting device PIO mode to atiixp_tuneproc().

* Add missing ide_get_best_pio_mode() call to atiixp_tuneproc() so
  "pio" == 255 (autotune) is handled correctly and "pio" values > 4 && < 255
  are filtered to PIO4 (previously "pio" == 5 could result in wrong timings
  being used and "pio" values > 4 && < 255 in an OOPS).

* Handle PIO modes early in atiixp_speedproc() so save_mdma_mode[]
  doesn't get cleared.

* In atiixp_dma_check():
  - fix max_mode argument for ide_get_best_pio_mode()
  - don't call atiixp_dma_2_pio() so PIO1 doesn't get remapped to PIO0
  - use atiixp_tuneproc() instead of atiixp_speedproc()

* Bump driver version.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoide: Stop mapping ROMs
Alan Cox [Thu, 19 Jul 2007 23:11:54 +0000]
ide: Stop mapping ROMs

Various old IDE drivers go mapping ROM devices for no apparent reason and
without using the ROM mapping API we now have. They don't actually use
the ROM they map and the new libata drivers are happy without it being
mapped so rather than port them lets just junk it for the next -rc1.

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Andrew Morton <akpm@osdl.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoIDE: Remove references to dead ETRAX-related variables.
Robert P. J. Day [Thu, 19 Jul 2007 23:11:54 +0000]
IDE: Remove references to dead ETRAX-related variables.

The two CONFIG variables

        CONFIG_ETRAX_IDE_CSE1_16_RESET
        CONFIG_ETRAX_IDE_CSP0_8_RESET

appear to have been dead since way back in 2.5.xx days:

http://www.linuxhq.com/kernel/v2.5/75/arch/cris/drivers/Kconfig

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Michael Starvik <starvik@axis.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoPCMCIA: Add another MemoryCard to ide-cs/pata_pcmcia
Marcin Juszkiewicz [Thu, 19 Jul 2007 23:11:53 +0000]
PCMCIA: Add another MemoryCard to ide-cs/pata_pcmcia

One card submitted by user.

Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoscc_pata.c: Workaround for errata A308 (take 2)
Kou Ishizaki [Thu, 19 Jul 2007 23:11:53 +0000]
scc_pata.c: Workaround for errata A308 (take 2)

Workaround for errata A308: turn down the UDMA mode and retry
the DMA command when the data lost condition is detected.

take2:
udma_filter() hook is used to limit ATAPI UDMA mode.

Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Signed-off-by: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoscc_pata: Use inline function for eieio
Kumar Gala [Thu, 19 Jul 2007 23:11:53 +0000]
scc_pata: Use inline function for eieio

Move to using inline function variant of eieio instead of inline assmebly.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: kou.ishizaki@toshiba.co.jp
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

12 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Thu, 19 Jul 2007 21:42:40 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/selinux-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  SELinux: use SECINITSID_NETMSG instead of SECINITSID_UNLABELED for NetLabel
  SELinux: enable dynamic activation/deactivation of NetLabel/SELinux enforcement

12 years agoMerge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6
Linus Torvalds [Thu, 19 Jul 2007 21:41:33 +0000]
Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6:
  [XFS] Fix inode size update before data write in xfs_setattr
  [XFS] Allow punching holes to free space when at ENOSPC
  [XFS] Implement ->page_mkwrite in XFS.
  [FS] Implement block_page_mkwrite.

Manually fix up conflict with Nick's VM fault handling patches in
fs/xfs/linux-2.6/xfs_file.c

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoi386: Allow KVM on i386 nonpae
Avi Kivity [Thu, 19 Jul 2007 11:30:14 +0000]
i386: Allow KVM on i386 nonpae

Currently, CONFIG_X86_CMPXCHG64 both enables boot-time checking of
the cmpxchg64b feature and enables compilation of the set_64bit() family.
Since the option is dependent on PAE, and since KVM depends on set_64bit(),
this effectively disables KVM on i386 nopae.

Simplify by removing the config option altogether: the boot check is made
dependent on CONFIG_X86_PAE directly, and the set_64bit() family is exposed
without constraints.  It is up to users to check for the feature flag (KVM
does not as virtualiation extensions imply its existence).

Signed-off-by: Avi Kivity <avi@qumranet.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge git://git.linux-nfs.org/pub/linux/nfs-2.6
Linus Torvalds [Thu, 19 Jul 2007 21:33:41 +0000]
Merge git://git.linux-nfs.org/pub/linux/nfs-2.6

* git://git.linux-nfs.org/pub/linux/nfs-2.6:
  NFSv4: handle lack of clientaddr in option string
  NFSv4: debug print ntohl(status) in nfs client callback xdr code
  SUNRPC: Clean up the sillyrename code
  NFS: Introduce struct nfs_removeargs+nfs_removeres
  NFS: Use dentry->d_time to store the parent directory verifier.
  SUNRPC: move bkl locking and xdr proc invocation into a common helper
  NFSv4: Fix the nfsv4 readlink reply buffer alignment
  NFSv4: Fix the readdir reply buffer alignment
  NFSv4: More NFSv4 xdr cleanups
  NFSv4: Try to recover from getfh failures in nfs4_xdr_dec_open
  NFSv4: 'constify' lookup arguments.
  NFSv4: Don't fail nfs4_xdr_dec_open if decode_restorefh() failed
  NFSv4: Fix open state recovery
  NFSD/SUNRPC: Fix the automatic selection of RPCSEC_GSS

12 years agoUpdate .gitignore for arch/i386/boot
Matthew Wilcox [Thu, 19 Jul 2007 19:09:10 +0000]
Update .gitignore for arch/i386/boot

With the new setup code, we generate a couple more files

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
[ .. and do the same for x86-64 - Alexey ]
Acked-by: Alexey Dobriyan <adobriyan@gmail.com>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agofix spufs build after ->fault changes
Christoph Hellwig [Thu, 19 Jul 2007 19:05:58 +0000]
fix spufs build after ->fault changes

83c54070ee1a2d05c89793884bea1a03f2851ed4 broke spufs by incorrectly
updating the code, this patch gets it to compile again.

It's probably still broken due to the scheduler changes, but this
at least makes sure cell kernels can still be built.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Geoff Levand <geoffrey.levand@am.sony.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild
Linus Torvalds [Thu, 19 Jul 2007 21:28:19 +0000]
Merge git://git./linux/kernel/git/sam/kbuild

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (33 commits)
  xtensa: use DATA_DATA in xtensa
  powerpc: add missing DATA_DATA to powerpc
  cris: use DATA_DATA in cris
  kallsyms: remove usage of memmem and _GNU_SOURCE from scripts/kallsyms.c
  kbuild: use -fno-optimize-sibling-calls unconditionally
  kconfig: reset generated values only if Kconfig and .config agree.
  kbuild: fix the warning when running make tags
  kconfig: strip 'CONFIG_' automatically in kernel configuration search
  kbuild: use POSIX BRE in headers install target
  Whitelist references from __dbe_table to .init
  modpost white list pattern adjustment
  kbuild: do section mismatch check on full vmlinux
  kbuild: whitelist references from variables named _timer to .init.text
  kbuild: remove hardcoded _logo names from modpost
  kbuild: remove hardcoded apic_es7000 from modpost
  kbuild: warn about references from .init.text to .exit.text
  kbuild: consolidate section checks
  kbuild: refactor code in modpost to improve maintainability
  kbuild: ignore section mismatch warnings originating from .note section
  kbuild: .paravirtprobe section is obsolete, so modpost doesn't need to handle it
  ...

12 years agoMerge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6
Linus Torvalds [Thu, 19 Jul 2007 21:24:57 +0000]
Merge branch 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6

* 'release' of git://lm-sensors.org/kernel/mhoffman/hwmon-2.6: (44 commits)
  i2c: Delete the i2c-isa pseudo bus driver
  hwmon: refuse to load abituguru driver on non-Abit boards
  hwmon: fix Abit Uguru3 driver detection on some motherboards
  hwmon/w83627ehf: Be quiet when no chip is found
  hwmon/w83627ehf: No need to initialize fan_min
  hwmon/w83627ehf: Export the thermal sensor types
  hwmon/w83627ehf: Enable VBAT monitoring
  hwmon/w83627ehf: Add support for the VID inputs
  hwmon/w83627ehf: Fix timing issues
  hwmon/w83627ehf: Add error messages for two error cases
  hwmon/w83627ehf: Convert to a platform driver
  hwmon/w83627ehf: Update the Kconfig entry
  make coretemp_device_remove() static
  hwmon: Add LM93 support
  hwmon: Improve the pwmN_enable documentation
  hwmon/smsc47b397: Don't report missing fans as spinning at 82 RPM
  hwmon: Add support for newer uGuru's
  hwmon/f71805f: Add temperature-tracking fan control mode
  hwmon/w83627ehf: Preserve speed reading when changing fan min
  hwmon: fix detection of abituguru volt inputs
  ...

Manual fixup of trivial conflict in MAINTAINERS file

12 years agorandom: fix bound check ordering (CVE-2007-3105)
Matt Mackall [Thu, 19 Jul 2007 18:30:14 +0000]
random: fix bound check ordering (CVE-2007-3105)

If root raised the default wakeup threshold over the size of the
output pool, the pool transfer function could overflow the stack with
RNG bytes, causing a DoS or potential privilege escalation.

(Bug reported by the PaX Team <pageexec@freemail.hu>)

Cc: Theodore Tso <tytso@mit.edu>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoMerge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfashe...
Linus Torvalds [Thu, 19 Jul 2007 21:16:44 +0000]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/mfasheh/ocfs2

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2:
  ocfs2: ->fallocate() support

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched
Linus Torvalds [Thu, 19 Jul 2007 21:11:14 +0000]
Merge git://git./linux/kernel/git/mingo/linux-2.6-sched

* git://git.kernel.org/pub/scm/linux/kernel/git/mingo/linux-2.6-sched:
  [PATCH] sched: implement cpu_clock(cpu) high-speed time source
  [PATCH] sched: fix the all pinned logic in load_balance_newidle()
  [PATCH] sched: fix newly idle load balance in case of SMT
  [PATCH] sched: sched_cacheflush is now unused

12 years agouser namespace: fix copy_user_ns return value
Serge E. Hallyn [Tue, 17 Jul 2007 19:28:17 +0000]
user namespace: fix copy_user_ns return value

When a CONFIG_USER_NS=n and a user tries to unshare some namespace other
than the user namespace, the dummy copy_user_ns returns NULL rather than
the old_ns.

This value then gets assigned to task->nsproxy->user_ns, so that a
subsequent setuid, which uses task->nsproxy->user_ns, causes a NULL
pointer deref.

Fix this by returning old_ns.

Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoslub: fix ksize() for zero-sized pointers
Linus Torvalds [Thu, 19 Jul 2007 20:21:34 +0000]
slub: fix ksize() for zero-sized pointers

The slab and slob allocators already did this right, but slub would call
"get_object_page()" on the magic ZERO_SIZE_PTR, with all kinds of nasty
end results.

Noted by Ingo Molnar.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years agoFix up non-NUMA SLAB configuration for zero-sized allocations
Linus Torvalds [Thu, 19 Jul 2007 20:17:15 +0000]
Fix up non-NUMA SLAB configuration for zero-sized allocations

I suspect Christoph tested his code only in the NUMA configuration, for
the combination of SLAB+non-NUMA the zero-sized kmalloc's would not work.

Of course, this would only trigger in configurations where those zero-
sized allocations happen (not very common), so that may explain why it
wasn't more widely noticed.

Seen by by Andi Kleen under qemu, and there seems to be a report by
Michael Tsirkin on it too.

Cc: Andi Kleen <ak@suse.de>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Michael S. Tsirkin <mst@dev.mellanox.co.il>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

12 years ago[PATCH] sched: implement cpu_clock(cpu) high-speed time source
Ingo Molnar [Thu, 19 Jul 2007 19:28:35 +0000]
[PATCH] sched: implement cpu_clock(cpu) high-speed time source

Implement the cpu_clock(cpu) interface for kernel-internal use:
high-speed (but slightly incorrect) per-cpu clock constructed from
sched_clock().

This API, unused at the moment, will be used in the future by blktrace,
by the softlockup-watchdog, by printk and by lockstat.

Signed-off-by: Ingo Molnar <mingo@elte.hu>