7 years agonet/usbnet: reserve headroom on rx skbs
Eric Dumazet [Wed, 14 Mar 2012 06:56:25 +0000]
net/usbnet: reserve headroom on rx skbs

network drivers should reserve some headroom on incoming skbs so that we
dont need expensive reallocations, eg forwarding packets in tunnels.

This NET_SKB_PAD padding is done in various helpers, like
__netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and
NET_IP_ALIGN magic.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: fix memory leak in bnx2x_init_firmware()
Michal Schmidt [Thu, 15 Mar 2012 14:08:29 +0000]
bnx2x: fix memory leak in bnx2x_init_firmware()

When cycling the interface down and up, bnx2x_init_firmware() knows that
the firmware is already loaded, but nevertheless it allocates certain
arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old
arrays are leaked.

Fix the leaks by returning early if the firmware was already loaded.
Because if the firmware is loaded, so are the arrays.

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: fix a crash on corrupt firmware file
Michal Schmidt [Thu, 15 Mar 2012 14:08:28 +0000]
bnx2x: fix a crash on corrupt firmware file

If the requested firmware is deemed corrupt and then released, reset the
pointer to NULL in order to avoid double-freeing it in
bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware().

Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Acked-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agosch_sfq: revert dont put new flow at the end of flows
Eric Dumazet [Tue, 13 Mar 2012 18:04:25 +0000]
sch_sfq: revert dont put new flow at the end of flows

This reverts commit d47a0ac7b6 (sch_sfq: dont put new flow at the end of
flows)

As Jesper found out, patch sounded great but has bad side effects.

In stress situation, pushing new flows in front of the queue can prevent
old flows doing any progress. Packets can stay in SFQ queue for
unlimited amount of time.

It's possible to add heuristics to limit this problem, but this would
add complexity outside of SFQ scope.

A more sensible answer to Dave Taht concerns (who reported the issued I
tried to solve in original commit) is probably to use a qdisc hierarchy
so that high prio packets dont enter a potentially crowded SFQ qdisc.

Reported-by: Jesper Dangaard Brouer <jdb@comx.dk>
Cc: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoipv6: fix icmp6_dst_alloc()
Eric Dumazet [Wed, 14 Mar 2012 21:13:11 +0000]
ipv6: fix icmp6_dst_alloc()

commit 87a115783 ( ipv6: Move xfrm_lookup() call down into
icmp6_dst_alloc().) forgot to convert one error path, leading
to crashes in mld_sendpack()

Many thanks to Dave Jones for providing a very complete bug report.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Linus Torvalds [Wed, 14 Mar 2012 01:39:28 +0000]
Merge git://git./linux/kernel/git/davem/sparc

Pull sparc updates from David Miller:
 "Please pull to get this fix for the sparc32 build when using a more
  recent binutils."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc32: Add -Av8 to assembler command line.

7 years agosparc32: Add -Av8 to assembler command line.
David S. Miller [Wed, 14 Mar 2012 01:19:51 +0000]
sparc32: Add -Av8 to assembler command line.

Newer version of binutils are more strict about specifying the
correct options to enable certain classes of instructions.

The sparc32 build is done for v7 in order to support sun4c systems
which lack hardware integer multiply and divide instructions.

So we have to pass -Av8 when building the assembler routines that
use these instructions and get patched into the kernel when we find
out that we have a v8 capable cpu.

Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 14 Mar 2012 00:57:07 +0000]
Merge git://git./linux/kernel/git/davem/net

Pull networking changes from David Miller:
 "The most important bit here is the TCP syncookies issue, which seems
  to have been busted for some time.  That fix has been verified in
  production by the reporter.

  1) Persistent TUN devices erroneously hold on to the network namespace
     in such a way that it cannot be shutdown.  Fix from Stanislav
     Kinsbursky with help from Eric Dumazet.

  2) TCP SYN cookies have been broken for a while due to how the route
     lookup flow key is managed, connections can be delayed by as much
     as 20 seconds due to this bug.  Fix from Eric Dumazet.

  3) Missing jiffies.h include in lib/dynamic_queue_limits.c can break
     the build, from Tom Herbert.

  4) Add USB device ID for Sitecom LN-031, from Joerg Neikes.

  5) Fix OOPS in delayed workqueue in iwlegacy, from Stanislaw Gruszka.

  6) rt2x00 TX queue can be disabled forever due to races, fix by
     synchronizing pause/unpause with a lock.  Also from Stanislaw
     Gruszka.

  7) Statistics and endian fix in bnx2x driver from Yuval Mintz, Eilon
     Greenstein, and Ariel Elior."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  tun: don't hold network namespace by tun sockets
  bnx2x: FCoE statistics id fixed
  bnx2x: dcb bit indices flags used as bits
  bnx2x: added cpu_to_le16 when preparing ramrod's data
  bnx2x: pfc statistics counts pfc events twice
  rt2x00: fix random stalls
  iwl3945: fix possible il->txq NULL pointer dereference in delayed works
  dql: Fix undefined jiffies
  tcp: fix syncookie regression
  usb: asix: Patch for Sitecom LN-031

7 years agoMerge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux...
Linus Torvalds [Wed, 14 Mar 2012 00:06:02 +0000]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

Pull arch/tile update from Chris Metcalf
 "These include a couple of queued-up minor bug fixes from the
  community, a fix to unbreak the sysfs hooks in tile, and syncing up
  the defconfigs."

Ugh.  defconfigs updates without "make minconfig".  Tons of ugly
pointless lines there, I suspect.

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: Use set_current_blocked() and block_sigmask()
  arch/tile: misplaced parens near likely
  arch/tile: sync up the defconfig files to the tip
  arch/tile: Fix up from commit 8a25a2fd126c621f44f3aeaef80d51f00fc11639

7 years agoMerge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 14 Mar 2012 00:04:50 +0000]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf record: Fix buffer overrun bug in tracepoint_id_to_path()
  perf/x86: Fix local vs remote memory events for NHM/WSM

7 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Wed, 14 Mar 2012 00:03:53 +0000]
Merge git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fixes from Steve French.

* git://git.samba.org/sfrench/cifs-2.6:
  CIFS: Do not kmalloc under the flocks spinlock
  cifs: possible memory leak in xattr.

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Linus Torvalds [Wed, 14 Mar 2012 00:00:50 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs

Pull vfs fixes from Al Viro:
 "A bunch of assorted fixes; Jan's freezing stuff still _not_ in there
  and neither is mm fun ;-/"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  restore smp_mb() in unlock_new_inode()
  vfs: fix return value from do_last()
  vfs: fix double put after complete_walk()
  udf: Fix deadlock in udf_release_file()
  vfs: Correctly set the dir i_mutex lockdep class

7 years agotile: Use set_current_blocked() and block_sigmask()
Matt Fleming [Tue, 14 Feb 2012 11:41:06 +0000]
tile: Use set_current_blocked() and block_sigmask()

As described in e6fa16ab ("signal: sigprocmask() should do
retarget_shared_pending()") the modification of current->blocked is
incorrect as we need to check whether the signal we're about to block
is pending in the shared queue.

Also, use the new helper function introduced in commit 5e6292c0f28f
("signal: add block_sigmask() for adding sigmask to current->blocked")
which centralises the code for updating current->blocked after
successfully delivering a signal and reduces the amount of duplicate
code across architectures. In the past some architectures got this
code wrong, so using this helper function should stop that from
happening again.

Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

7 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Tue, 13 Mar 2012 18:38:51 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

7 years agoperf record: Fix buffer overrun bug in tracepoint_id_to_path()
Stephane Eranian [Tue, 13 Mar 2012 15:51:02 +0000]
perf record: Fix buffer overrun bug in tracepoint_id_to_path()

This patch fixes a buffer overrun bug in
tracepoint_id_to_path(). The bug manisfested itself as a memory
error reported by perf record. I ran into it with perf sched:

 $ perf sched rec noploop 2 noploop for 2 seconds
 [ perf record: Woken up 14 times to write data ]
 [ perf record: Captured and wrote 42.701 MB perf.data (~1865622 samples) ]
 Fatal: No memory to alloc tracepoints list

It turned out that tracepoint_id_to_path() was reading the
tracepoint id using read() but the buffer was not large enough
to include the \n terminator for id with 4 digits or more.

The patch fixes the problem by extending the buffer to a more
reasonable size covering all possible id length include \n
terminator. Note that atoll() stops at the first non digit
character, thus it is not necessary to clear the buffer between
each read.

Signed-off-by: Stephane Eranian <eranian@google.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: fweisbec@gmail.com
Cc: dsahern@gmail.com
Link: http://lkml.kernel.org/r/20120313155102.GA6465@quad
Signed-off-by: Ingo Molnar <mingo@elte.hu>

7 years agoMerge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Linus Torvalds [Tue, 13 Mar 2012 05:59:34 +0000]
Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86

Pull x86 platfrm driver fixes from Matthew Garrett:
 "Some trivial patches that fix wifi on some Lenovos and avoid a
  potential memory corruption issue on some Panasonics, plus two
  straightforward new drivers that touch no existing code."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()
  acer-wmi: No wifi rfkill on Lenovo machines
  Fujitsu tablet extras driver
  x86: Add amilo-rfkill driver for some Fujitsu-Siemens Amilo laptops

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci
Linus Torvalds [Tue, 13 Mar 2012 05:53:37 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci

Pull PCI changes from Jesse Barnes:
 "A single fix for a regression that affects some people who try to
  disable ASPM for whatever reason."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci:
  PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

7 years agoMerge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh
Linus Torvalds [Tue, 13 Mar 2012 05:50:20 +0000]
Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-sh

Pull SuperH fixes from Paul Mundt.

* tag 'sh-for-linus' of git://github.com/pmundt/linux-sh:
  sh-sci / PM: Avoid deadlocking runtime PM
  sh: fix up the ubc clock definition for sh7785.
  sh: add parameter for RSPI in clock-sh7757
  sh: Fix sh2a vbr table for more than 255 irqs

7 years agoMerge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh
Linus Torvalds [Tue, 13 Mar 2012 05:47:20 +0000]
Merge tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh

Pull SH/R-Mobile fixes from Paul Mundt.

* tag 'rmobile-for-linus' of git://github.com/pmundt/linux-sh:
  ARM: mach-shmobile: ap4evb: fixup fsi2_ak4643_info typo
  ARM: mach-shmobile: mackerel: Reserve DMA memory for the frame buffer
  ARM: mach-shmobile: Fix ag5evm compilation by including linux/videodev2.h
  ARM: mach-shmobile: Fix bonito compile breakage

7 years agotun: don't hold network namespace by tun sockets
Stanislav Kinsbursky [Mon, 12 Mar 2012 02:59:41 +0000]
tun: don't hold network namespace by tun sockets

v3: added previously removed sock_put() to the tun_release() callback, because
sk_release_kernel() doesn't drop the socket reference.

v2: sk_release_kernel() used for socket release. Dummy tun_release() is
required for sk_release_kernel() ---> sock_release() ---> sock->ops->release()
call.

TUN was designed to destroy it's socket on network namesapce shutdown. But this
will never happen for persistent device, because it's socket holds network
namespace.
This patch removes of holding network namespace by TUN socket and replaces it
by creating socket in init_net and then changing it's net it to desired one. On
shutdown socket is moved back to init_net prior to final put.

Signed-off-by: Stanislav Kinsbursky <skinsbursky@parallels.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: FCoE statistics id fixed
Yuval Mintz [Mon, 12 Mar 2012 11:22:07 +0000]
bnx2x: FCoE statistics id fixed

FCoE statistics ids were distinguished from the L2's statistics ids.
However, not all of the change was committed. This causes a possible
collision of indices when FCoE is present.

This patch fixes the issue.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: dcb bit indices flags used as bits
Yuval Mintz [Mon, 12 Mar 2012 11:22:06 +0000]
bnx2x: dcb bit indices flags used as bits

DCB flags were updated using the flags' bit offsets instead of
the actual bits. This is now fixed.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: added cpu_to_le16 when preparing ramrod's data
Ariel Elior [Mon, 12 Mar 2012 11:22:05 +0000]
bnx2x: added cpu_to_le16 when preparing ramrod's data

Fixed endianess issue when passing arguments to FW.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobnx2x: pfc statistics counts pfc events twice
Yuval Mintz [Mon, 12 Mar 2012 11:22:04 +0000]
bnx2x: pfc statistics counts pfc events twice

When pfc statistics were counted, the delta change from last count
was summed twice. This fixes the issue.

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoperf/x86: Fix local vs remote memory events for NHM/WSM
Peter Zijlstra [Mon, 5 Mar 2012 22:59:25 +0000]
perf/x86: Fix local vs remote memory events for NHM/WSM

Verified using the below proglet.. before:

[root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0
remote write

 Performance counter stats for './numa 0':

         2,101,554 node-stores
         2,096,931 node-store-misses

       5.021546079 seconds time elapsed

[root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1
local write

 Performance counter stats for './numa 1':

           501,137 node-stores
               199 node-store-misses

       5.124451068 seconds time elapsed

After:

[root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 0
remote write

 Performance counter stats for './numa 0':

         2,107,516 node-stores
         2,097,187 node-store-misses

       5.012755149 seconds time elapsed

[root@westmere ~]# perf stat -e node-stores -e node-store-misses ./numa 1
local write

 Performance counter stats for './numa 1':

         2,063,355 node-stores
               165 node-store-misses

       5.082091494 seconds time elapsed

#define _GNU_SOURCE

#include <sched.h>
#include <stdio.h>
#include <errno.h>
#include <sys/mman.h>
#include <sys/types.h>
#include <dirent.h>
#include <signal.h>
#include <unistd.h>
#include <numaif.h>
#include <stdlib.h>

#define SIZE (32*1024*1024)

volatile int done;

void sig_done(int sig)
{
done = 1;
}

int main(int argc, char **argv)
{
cpu_set_t *mask, *mask2;
size_t size;
int i, err, t;
int nrcpus = 1024;
char *mem;
unsigned long nodemask = 0x01; /* node 0 */
DIR *node;
struct dirent *de;
int read = 0;
int local = 0;

if (argc < 2) {
printf("usage: %s [0-3]\n", argv[0]);
printf("  bit0 - local/remote\n");
printf("  bit1 - read/write\n");
exit(0);
}

switch (atoi(argv[1])) {
case 0:
printf("remote write\n");
break;
case 1:
printf("local write\n");
local = 1;
break;
case 2:
printf("remote read\n");
read = 1;
break;
case 3:
printf("local read\n");
local = 1;
read = 1;
break;
}

mask = CPU_ALLOC(nrcpus);
size = CPU_ALLOC_SIZE(nrcpus);
CPU_ZERO_S(size, mask);

node = opendir("/sys/devices/system/node/node0/");
if (!node)
perror("opendir");
while ((de = readdir(node))) {
int cpu;

if (sscanf(de->d_name, "cpu%d", &cpu) == 1)
CPU_SET_S(cpu, size, mask);
}
closedir(node);

mask2 = CPU_ALLOC(nrcpus);
CPU_ZERO_S(size, mask2);
for (i = 0; i < size; i++)
CPU_SET_S(i, size, mask2);
CPU_XOR_S(size, mask2, mask2, mask); // invert

if (!local)
mask = mask2;

err = sched_setaffinity(0, size, mask);
if (err)
perror("sched_setaffinity");

mem = mmap(0, SIZE, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
err = mbind(mem, SIZE, MPOL_BIND, &nodemask, 8*sizeof(nodemask), MPOL_MF_MOVE);
if (err)
perror("mbind");

signal(SIGALRM, sig_done);
alarm(5);

if (!read) {
while (!done) {
for (i = 0; i < SIZE; i++)
mem[i] = 0x01;
}
} else {
while (!done) {
for (i = 0; i < SIZE; i++)
t += *(volatile char *)(mem + i);
}
}

return 0;
}

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/n/tip-tq73sxus35xmqpojf7ootxgs@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>

7 years agoarch/tile: misplaced parens near likely
roel [Mon, 12 Dec 2011 22:34:06 +0000]
arch/tile: misplaced parens near likely

Parentheses were missing.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

7 years agoarch/tile: sync up the defconfig files to the tip
Chris Metcalf [Mon, 12 Mar 2012 19:22:52 +0000]
arch/tile: sync up the defconfig files to the tip

This was inspired by mchehab@redhat.com's observation that we
didn't have EDAC configured on by default in both files.  In addition,
we were setting INITRAMFS_SOURCE to a non-empty string, which isn't
a very common default and required editing to do test builds.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

7 years agoarch/tile: Fix up from commit 8a25a2fd126c621f44f3aeaef80d51f00fc11639
Chris Metcalf [Mon, 12 Mar 2012 19:15:21 +0000]
arch/tile: Fix up from commit 8a25a2fd126c621f44f3aeaef80d51f00fc11639

This was Kay Siever's bombing to convert 'cpu' to a regular subsystem.
The change left a bogus second argument to sysfs_create_file().

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

7 years agort2x00: fix random stalls
Stanislaw Gruszka [Fri, 9 Mar 2012 11:39:54 +0000]
rt2x00: fix random stalls

Is possible that we stop queue and then do not wake up it again,
especially when packets are transmitted fast. That can be easily
reproduced with modified tx queue entry_num to some small value e.g. 16.

If mac80211 already hold local->queue_stop_reason_lock, then we can wait
on that lock in both rt2x00queue_pause_queue() and
rt2x00queue_unpause_queue(). After drooping ->queue_stop_reason_lock
is possible that __ieee80211_wake_queue() will be performed before
__ieee80211_stop_queue(), hence we stop queue and newer wake up it
again.

Another race condition is possible when between rt2x00queue_threshold()
check and rt2x00queue_pause_queue() we will process all pending tx
buffers on different cpu. This might happen if for example interrupt
will be triggered on cpu performing rt2x00mac_tx().

To prevent race conditions serialize pause/unpause by queue->tx_lock.

Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agoiwl3945: fix possible il->txq NULL pointer dereference in delayed works
Stanislaw Gruszka [Thu, 8 Mar 2012 12:16:01 +0000]
iwl3945: fix possible il->txq NULL pointer dereference in delayed works

On il3945_down procedure we free tx queue data and nullify il->txq
pointer. After that we drop mutex and then cancel delayed works. There
is possibility, that after drooping mutex and before the cancel, some
delayed work will start and crash while trying to send commands to
the device. For example, here is reported crash in
il3945_bg_reg_txpower_periodic():
https://bugzilla.kernel.org/show_bug.cgi?id=42766#c10

Patch fix problem by adding il->txq check on works that send commands,
hence utilize tx queue.

Reported-by: Clemens Eisserer <linuxhippy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

7 years agopanasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()
Xi Wang [Thu, 29 Dec 2011 04:49:06 +0000]
panasonic-laptop: avoid overflow in acpi_pcc_hotkey_add()

num_sifr could go negative since acpi_pcc_get_sqty() returns -EINVAL
on error.  Then it could bypass the sanity check (num_sifr > 255).
The subsequent call to kzalloc() would allocate a small buffer, leading
to a memory corruption.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agoacer-wmi: No wifi rfkill on Lenovo machines
Ike Panhc [Fri, 3 Feb 2012 08:46:39 +0000]
acer-wmi: No wifi rfkill on Lenovo machines

We have several reports which says acer-wmi is loaded on ideapads
and register rfkill for wifi which can not be unblocked.

Since ideapad-laptop also register rfkill for wifi and it works
reliably, it will be fine acer-wmi is not going to register rfkill
for wifi once VPC2004 is found.

Also put IBM0068/LEN0068 in the list. Though thinkpad_acpi has no
wifi rfkill capability, there are reports which says acer-wmi also
block wireless on Thinkpad E520/E420.

Signed-off-by: Ike Panhc <ike.pan@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agoFujitsu tablet extras driver
Robert Gerlach [Wed, 18 Jan 2012 13:26:22 +0000]
Fujitsu tablet extras driver

This patch adds support for some of the devices within a wide variety
of Fujitsu Tablet Computers, both convertibles and slates. Primarily
it allows for the automatic detection of the tablet/notebook mode for
convertible tablet pc's, and orientation for docked slates. It also
adds support for the application panel buttons usually found next to
the tablet screen, and docking station detection for slates.

Signed-off-by: Robert Gerlach <khnz@gmx.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agox86: Add amilo-rfkill driver for some Fujitsu-Siemens Amilo laptops
Ben Hutchings [Fri, 25 Nov 2011 04:09:37 +0000]
x86: Add amilo-rfkill driver for some Fujitsu-Siemens Amilo laptops

An rfkill driver based on the fsaa1655g and fsam7440 drivers for
Fujitsu-Siemens Amilo A1655 and M7440 models found at:

http://sourceforge.net/projects/fsaa1655g/
http://sourceforge.net/projects/fsam7440/

This adds DMI matching, replaces the procfs files with rfkill devices,
and uses the proper functions to write to the i8042 safely.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Matthew Garrett <mjg@redhat.com>

7 years agodql: Fix undefined jiffies
Tom Herbert [Mon, 12 Mar 2012 02:59:43 +0000]
dql: Fix undefined jiffies

In some configurations, jiffies may be undefined in
lib/dynamic_queue_limits.c.  Adding include of jiffies.h to avoid
this.

Signed-off-by: Tom Herbert <therbert@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agotcp: fix syncookie regression
Eric Dumazet [Sat, 10 Mar 2012 09:20:21 +0000]
tcp: fix syncookie regression

commit ea4fc0d619 (ipv4: Don't use rt->rt_{src,dst} in ip_queue_xmit())
added a serious regression on synflood handling.

Simon Kirby discovered a successful connection was delayed by 20 seconds
before being responsive.

In my tests, I discovered that xmit frames were lost, and needed ~4
retransmits and a socket dst rebuild before being really sent.

In case of syncookie initiated connection, we use a different path to
initialize the socket dst, and inet->cork.fl.u.ip4 is left cleared.

As ip_queue_xmit() now depends on inet flow being setup, fix this by
copying the temp flowi4 we use in cookie_v4_check().

Reported-by: Simon Kirby <sim@netnation.com>
Bisected-by: Simon Kirby <sim@netnation.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agousb: asix: Patch for Sitecom LN-031
Joerg Neikes [Thu, 8 Mar 2012 22:44:03 +0000]
usb: asix: Patch for Sitecom LN-031

This patch adds support for the Sitecom LN-031 USB adapter with a AX88178 chip.

Added USB id to find correct driver for AX88178 1000 Ethernet adapter.

Signed-off-by: Joerg Neikes <j.neikes@midlandgate.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agorestore smp_mb() in unlock_new_inode()
Al Viro [Sat, 10 Mar 2012 22:07:28 +0000]
restore smp_mb() in unlock_new_inode()

wait_on_inode() doesn't have ->i_lock

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agovfs: fix return value from do_last()
Miklos Szeredi [Tue, 6 Mar 2012 12:56:34 +0000]
vfs: fix return value from do_last()

complete_walk() returns either ECHILD or ESTALE.  do_last() turns this into
ECHILD unconditionally.  If not in RCU mode, this error will reach userspace
which is complete nonsense.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agovfs: fix double put after complete_walk()
Miklos Szeredi [Tue, 6 Mar 2012 12:56:33 +0000]
vfs: fix double put after complete_walk()

complete_walk() already puts nd->path, no need to do it again at cleanup time.

This would result in Oopses if triggered, apparently the codepath is not too
well exercised.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoLinux 3.3-rc7
Linus Torvalds [Sat, 10 Mar 2012 21:49:52 +0000]
Linux 3.3-rc7

7 years agoudf: Fix deadlock in udf_release_file()
Jan Kara [Mon, 20 Feb 2012 16:54:00 +0000]
udf: Fix deadlock in udf_release_file()

udf_release_file() can be called from munmap() path with mmap_sem held.  Thus
we cannot take i_mutex there because that ranks above mmap_sem. Luckily,
i_mutex is not needed in udf_release_file() anymore since protection by
i_data_sem is enough to protect from races with write and truncate.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Reviewed-by: Namjae Jeon <linkinjeon@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agovfs: Correctly set the dir i_mutex lockdep class
Tyler Hicks [Mon, 12 Dec 2011 16:02:30 +0000]
vfs: Correctly set the dir i_mutex lockdep class

9a7aa12f3911853a introduced additional logic around setting the i_mutex
lockdep class for directory inodes. The idea was that some filesystems
may want their own special lockdep class for different directory
inodes and calling unlock_new_inode() should not clobber one of
those special classes.

I believe that the added conditional, around the *negated* return value
of lockdep_match_class(), caused directory inodes to be placed in the
wrong lockdep class.

inode_init_always() sets the i_mutex lockdep class with i_mutex_key for
all inodes. If the filesystem did not change the class during inode
initialization, then the conditional mentioned above was false and the
directory inode was incorrectly left in the non-directory lockdep class.
If the filesystem did set a special lockdep class, then the conditional
mentioned above was true and that class was clobbered with
i_mutex_dir_key.

This patch removes the negation from the conditional so that the i_mutex
lockdep class is properly set for directory inodes. Special classes are
preserved and directory inodes with unmodified classes are set with
i_mutex_dir_key.

Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoaio: fix the "too late munmap()" race
Al Viro [Thu, 8 Mar 2012 17:51:19 +0000]
aio: fix the "too late munmap()" race

Current code has put_ioctx() called asynchronously from aio_fput_routine();
that's done *after* we have killed the request that used to pin ioctx,
so there's nothing to stop io_destroy() waiting in wait_for_all_aios()
from progressing.  As the result, we can end up with async call of
put_ioctx() being the last one and possibly happening during exit_mmap()
or elf_core_dump(), neither of which expects stray munmap() being done
to them...

We do need to prevent _freeing_ ioctx until aio_fput_routine() is done
with that, but that's all we care about - neither io_destroy() nor
exit_aio() will progress past wait_for_all_aios() until aio_fput_routine()
does really_put_req(), so the ioctx teardown won't be done until then
and we don't care about the contents of ioctx past that point.

Since actual freeing of these suckers is RCU-delayed, we don't need to
bump ioctx refcount when request goes into list for async removal.
All we need is rcu_read_lock held just over the ->ctx_lock-protected
area in aio_fput_routine().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoaio: fix io_setup/io_destroy race
Al Viro [Wed, 7 Mar 2012 05:16:35 +0000]
aio: fix io_setup/io_destroy race

Have ioctx_alloc() return an extra reference, so that caller would drop it
on success and not bother with re-grabbing it on failure exit.  The current
code is obviously broken - io_destroy() from another thread that managed
to guess the address io_setup() would've returned would free ioctx right
under us; gets especially interesting if aio_context_t * we pass to
io_setup() points to PROT_READ mapping, so put_user() fails and we end
up doing io_destroy() on kioctx another thread has just got freed...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin LaHaise <bcrl@kvack.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux...
Linus Torvalds [Sat, 10 Mar 2012 02:09:18 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs

Pull btrfs updates from Chris Mason:
 "I have two additional and btrfs fixes in my for-linus branch.  One is
  a casting error that leads to memory corruption on i386 during scrub,
  and the other fixes a corner case in the backref walking code (also
  triggered by scrub)."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: fix casting error in scrub reada code
  btrfs: fix locking issues in find_parent_nodes()

7 years agomemcg: revert fix to mapcount check for this release
Hugh Dickins [Fri, 9 Mar 2012 21:37:32 +0000]
memcg: revert fix to mapcount check for this release

Respectfully revert commit e6ca7b89dc76 "memcg: fix mapcount check
in move charge code for anonymous page" for the 3.3 release, so that
it behaves exactly like releases 2.6.35 through 3.2 in this respect.

Horiguchi-san's commit is correct in itself, 1 makes much more sense
than 2 in that check; but it does not go far enough - swapcount
should be considered too - if we really want such a check at all.

We appear to have reached agreement now, and expect that 3.4 will
remove the mapcount check, but had better not make 3.3 different.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agox86: Derandom delay_tsc for 64 bit
Thomas Gleixner [Fri, 9 Mar 2012 19:55:10 +0000]
x86: Derandom delay_tsc for 64 bit

Commit f0fbf0abc093 ("x86: integrate delay functions") converted
delay_tsc() into a random delay generator for 64 bit.  The reason is
that it merged the mostly identical versions of delay_32.c and
delay_64.c.  Though the subtle difference of the result was:

 static void delay_tsc(unsigned long loops)
 {
- unsigned bclock, now;
+ unsigned long bclock, now;

Now the function uses rdtscl() which returns the lower 32bit of the
TSC. On 32bit that's not problematic as unsigned long is 32bit. On 64
bit this fails when the lower 32bit are close to wrap around when
bclock is read, because the following check

       if ((now - bclock) >= loops)
           break;

evaluated to true on 64bit for e.g. bclock = 0xffffffff and now = 0
because the unsigned long (now - bclock) of these values results in
0xffffffff00000001 which is definitely larger than the loops
value. That explains Tvortkos observation:

"Because I am seeing udelay(500) (_occasionally_) being short, and
 that by delaying for some duration between 0us (yep) and 491us."

Make those variables explicitely u32 again, so this works for both 32
and 64 bit.

Reported-by: Tvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # >= 2.6.27
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Fri, 9 Mar 2012 20:14:23 +0000]
Merge tag 'sound-fixes' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "Nothing exciting here: just a few regression fixes for HD-audio and
  ASoC, also the support of missing 32bit compat ioctl for HDSPM."

* tag 'sound-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hdspm - Provide ioctl_compat
  ALSA: hda/realtek - Apply the coef-setup only to ALC269VB
  ALSA: hda - add quirk to detect CD input on Gigabyte EP45-DS3
  ASoC: neo1973: fix neo1973 wm8753 initialization

7 years agoMAINTAINERS: new git entry for arm/mach-msm
David Brown [Fri, 9 Mar 2012 19:39:32 +0000]
MAINTAINERS: new git entry for arm/mach-msm

The msm git tree moved to

  git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git

Signed-off-by: David Brown <davidb@codeaurora.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming
Linus Torvalds [Fri, 9 Mar 2012 15:27:38 +0000]
Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming

Pull C6X fix from Mark Salter:
 "Fix for C6X KSTK_EIP and KSTK_ESP macros."

* tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming:
  C6X: fix KSTK_EIP and KSTK_ESP macros

7 years agoMerge tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 9 Mar 2012 15:26:25 +0000]
Merge tag 'iommu-fixes-v3.3-rc6' of git://git./linux/kernel/git/joro/iommu

Pull two IOMMU fixes from Joerg Roedel:
 "The first is an additional fix for the OMAP initialization order issue
  and the second patch fixes a possible section mismatch which can lead
  to a kernel crash in the AMD IOMMU driver when suspend/resume is used
  and the compiler has not inlined the iommu_set_device_table function."

* tag 'iommu-fixes-v3.3-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  x86/amd: iommu_set_device_table() must not be __init
  ARM: OMAP: fix iommu, not mailbox

7 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Fri, 9 Mar 2012 15:23:17 +0000]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull radeon drm stuff from Dave Airlie:
 "Just some radeon fixes, one is for an oops where we run out of ioremap
  space on some big hardware systems in 32-bit mode, stuff doesn't work
  properly but at least the machine will boot.

  One regression fix, and two bugs, one hw, one blit code."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: fix hdmi duallink checks
  drm/radeon/kms: set SX_MISC in the r6xx blit code (v2)
  drm/radeon: deal with errors from framebuffer init path.
  drm/radeon: fix a semaphore deadlock on pre cayman asics

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Fri, 9 Mar 2012 15:14:44 +0000]
Merge git://git./linux/kernel/git/davem/net

Pull networking from David Miller:

1) IPV4 routing metrics can become stale when routes are changed by the
   administrator, fix from Steffen Klassert.

2) atl1c does "val |= XXX;" where XXX is a bit number not a bit mask,
   fix by using set_bit.  From Dan Carpenter.

3) Memory accounting bug in carl9170 driver results in wedged TX queue.
   Fix from Nicolas Cavallari.

4) iwlwifi accidently uses "sizeof(ptr)" instead of "sizeof(*ptr)", fix
   from Johannes Berg.

5) Openvswitch doesn't honor dp_ifindex when doing vport lookups, fix
   from Ben Pfaff.

6) ehea conversion to 64-bit stats lost multicast and rx_errors
   accounting, fix from Eric Dumazet.

7) Bridge state transition logging in br_stp_disable_port() is busted,
   it's emitted at the wrong time and the message is in the wrong tense,
   fix from Paulius Zaleckas.

8) mlx4 device erroneously invokes the queue resize firmware operation
   twice, fix from Jack Morgenstein.

9) Fix deadlock in usbnet, need to drop lock when invoking usb_unlink_urb()
   otherwise we recurse into taking it again.  Fix from Sebastian Siewior.

10) hyperv network driver uses the wrong driver name string, fix from
    Haiyang Zhang.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver
  net/usbnet: avoid recursive locking in usbnet_stop()
  route: Remove redirect_genid
  inetpeer: Invalidate the inetpeer tree along with the routing cache
  mlx4_core: fix bug in modify_cq wrapper for resize flow.
  atl1c: set ATL1C_WORK_EVENT_RESET bit correctly
  bridge: fix state reporting when port is disabled
  bridge: br_log_state() s/entering/entered/
  ehea: restore multicast and rx_errors fields
  openvswitch: Fix checksum update for actions on UDP packets.
  openvswitch: Honor dp_ifindex, when specified, for vport lookup by name.
  iwlwifi: fix wowlan suspend
  mwifiex: reset encryption mode flag before association
  carl9170: fix frame delivery if sta is in powersave mode
  carl9170: Fix memory accounting when sta is in power-save mode.

7 years agosh-sci / PM: Avoid deadlocking runtime PM
Rafael J. Wysocki [Fri, 9 Mar 2012 03:59:44 +0000]
sh-sci / PM: Avoid deadlocking runtime PM

The runtime PM of sh-sci devices is enabled when sci_probe() returns,
so the pm_runtime_put_sync() executed by driver_probe_device()
attempts to suspend the device.  Then, in some situations, a
diagnostic message is printed to the console by one of the runtime
suspend routines handling the sh-sci device, which causes synchronous
runtime resume to be started from the device's own runtime suspend
callback.  This causes rpm_resume() to be run eventually, which sees
the RPM_SUSPENDING status set by rpm_suspend() and waits for it to
change.  However, the device's runtime PM status cannot change at
that point, because the routine that has set it waits for the
rpm_suspend() to return.  A deadlock occurs as a result.

To avoid that make sci_init_single() increment the device's
runtime PM usage counter, so that it cannot be suspended by
driver_probe_device().  That counter has to be decremented
eventually, so make sci_startup() do that before starting to
actually use the device and make sci_shutdown() increment it
again before returning to balance the incrementation carried out by
sci_startup().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

7 years agoMerge tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Linus Torvalds [Fri, 9 Mar 2012 01:32:42 +0000]
Merge tag 'fixes-urgent' of git://git./linux/kernel/git/arm/arm-soc

Pull last minute fixes from Olof Johansson:
 "One samsung build fix due to a mis-applied patch, and a small set of
  OMAP fixes.  This should be the last from arm-soc for 3.3, hopefully."

* tag 'fixes-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: S3C2440: Fixed build error for s3c244x
  ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688
  ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision
  ARM: OMAP2+: Remove apply_uV constraints for fixed regulator
  ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts

7 years agoMerge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Linus Torvalds [Fri, 9 Mar 2012 01:25:17 +0000]
Merge tag 'for-linus' of git://git./linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "Another small, clear fix in a specific driver."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: tps65910: Configure correct value for VDDCTRL vout reg

7 years agoMerge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Fri, 9 Mar 2012 01:24:27 +0000]
Merge tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull minor devicetree bug fixes and documentation updates from Grant Likely:
 "Fixes up a duplicate #include, adds an empty implementation of
  of_find_compatible_node() and make git ignore .dtb files.  And fix up
  bus name on OF described PHYs.  Nothing exciting here."

* tag 'devicetree-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  doc: dt: Fix broken reference in gpio-leds documentation
  of/mdio: fix fixed link bus name
  of/fdt.c: asm/setup.h included twice
  of: add picochip vendor prefix
  dt: add empty of_find_compatible_node function
  ARM: devicetree: Add .dtb files to arch/arm/boot/.gitignore

7 years agoMerge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Fri, 9 Mar 2012 01:23:45 +0000]
Merge tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6

Pull SPI section mismatch bug fix for v3.3-rc3 from Grant Likely:
 "Minor fix for pl022_dma_probe() function which was put in the wrong
  section."

* tag 'spi-for-linus' of git://git.secretlab.ca/git/linux-2.6:
  Fix section mismatch in spi-pl022.c

7 years agoMerge tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck...
Linus Torvalds [Fri, 9 Mar 2012 01:22:54 +0000]
Merge tag 'hwmon-for-linus' of git://git./linux/kernel/git/groeck/linux-staging

Pull four hwmon patches from Guenter Roeck

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804
  hwmon: (zl6100) Maintain delay parameter in driver instance data
  hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes
  hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000

7 years agoMerge tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm
Linus Torvalds [Fri, 9 Mar 2012 01:21:51 +0000]
Merge tag 'dm-3.3-fixes' of git://git./linux/kernel/git/agk/linux-dm

Pull device-mapper fixes for 3.3 from Alasdair Kergon

Eight small device-mapper bug fixes.

* tag 'dm-3.3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm:
  dm raid: fix flush support
  dm raid: set MD_CHANGE_DEVS when rebuilding
  dm thin metadata: decrement counter after removing mapped block
  dm thin metadata: unlock superblock in init_pmd error path
  dm thin metadata: remove incorrect close_device on creation error paths
  dm flakey: fix crash on read when corrupt_bio_byte not set
  dm io: fix discard support
  dm ioctl: do not leak argv if target message only contains whitespace

7 years agonet/hyperv: Use the built-in macro KBUILD_MODNAME for this driver
Haiyang Zhang [Wed, 7 Mar 2012 10:02:00 +0000]
net/hyperv: Use the built-in macro KBUILD_MODNAME for this driver

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: Olaf Hering <olaf@aepfle.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux...
Olof Johansson [Thu, 8 Mar 2012 18:56:12 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/tmlind/linux-omap into fixes

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: Fix module build errors with CONFIG_OMAP4_ERRATA_I688
  ARM: OMAP: id: Add missing break statement in omap3xxx_check_revision
  ARM: OMAP2+: Remove apply_uV constraints for fixed regulator
  ARM: OMAP: irqs: Fix NR_IRQS value to handle PRCM interrupts

7 years agoARM: S3C2440: Fixed build error for s3c244x
Kukjin Kim [Thu, 8 Mar 2012 09:48:36 +0000]
ARM: S3C2440: Fixed build error for s3c244x

Fixed following:
arch/arm/mach-s3c2440/s3c244x.c: In function 's3c244x_restart':
arch/arm/mach-s3c2440/s3c244x.c:209: error: expected declaration or statement at end of input
make[1]: *** [arch/arm/mach-s3c24xx/s3c244x.o] Error 1
make: *** [arch/arm/mach-s3c24xx] Error 2

Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

7 years agoALSA: hdspm - Provide ioctl_compat
Adrian Knoth [Thu, 8 Mar 2012 14:38:04 +0000]
ALSA: hdspm - Provide ioctl_compat

snd_hdspm uses its own ioctls to acquire config- and status information.
Expose the corresponding ioctl handler via ioctl_compat, so that 32bit
applications can use it on 64bit kernels.

Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agox86/amd: iommu_set_device_table() must not be __init
Jan Beulich [Thu, 8 Mar 2012 08:58:13 +0000]
x86/amd: iommu_set_device_table() must not be __init

This function is called from enable_iommus(), which in turn is used
from amd_iommu_resume().

Cc: stable@vger.kernel.org
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>

7 years agodrm/radeon/kms: fix hdmi duallink checks
Alex Deucher [Thu, 8 Mar 2012 00:05:01 +0000]
drm/radeon/kms: fix hdmi duallink checks

All pre-SI chips are limited to 165 Mhz for single link.
Code in question will be re-enabled when SI support is added.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=44755
https://bugzilla.kernel.org/show_bug.cgi?id=42887

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: set SX_MISC in the r6xx blit code (v2)
Marek Olšák [Wed, 7 Mar 2012 22:33:00 +0000]
drm/radeon/kms: set SX_MISC in the r6xx blit code (v2)

Mesa may set it to 1, causing all primitives to be killed.

v2: also update the r7xx code

Signed-off-by: Marek Olšák <maraeo@gmail.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agonet/usbnet: avoid recursive locking in usbnet_stop()
Sebastian Siewior [Wed, 7 Mar 2012 10:19:28 +0000]
net/usbnet: avoid recursive locking in usbnet_stop()

|kernel BUG at kernel/rtmutex.c:724!
|[<c029599c>] (rt_spin_lock_slowlock+0x108/0x2bc) from [<c01c2330>] (defer_bh+0x1c/0xb4)
|[<c01c2330>] (defer_bh+0x1c/0xb4) from [<c01c3afc>] (rx_complete+0x14c/0x194)
|[<c01c3afc>] (rx_complete+0x14c/0x194) from [<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0)
|[<c01cac88>] (usb_hcd_giveback_urb+0xa0/0xf0) from [<c01e1ff4>] (musb_giveback+0x34/0x40)
|[<c01e1ff4>] (musb_giveback+0x34/0x40) from [<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0)
|[<c01e2b1c>] (musb_advance_schedule+0xb4/0x1c0) from [<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c)
|[<c01e2ca8>] (musb_cleanup_urb.isra.9+0x80/0x8c) from [<c01e2ed0>] (musb_urb_dequeue+0xec/0x108)
|[<c01e2ed0>] (musb_urb_dequeue+0xec/0x108) from [<c01cbb90>] (unlink1+0xbc/0xcc)
|[<c01cbb90>] (unlink1+0xbc/0xcc) from [<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8)
|[<c01cc2ec>] (usb_hcd_unlink_urb+0x54/0xa8) from [<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58)
|[<c01c2a84>] (unlink_urbs.isra.17+0x2c/0x58) from [<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c)
|[<c01c2b44>] (usbnet_terminate_urbs+0x94/0x10c) from [<c01c2d68>] (usbnet_stop+0x100/0x15c)
|[<c01c2d68>] (usbnet_stop+0x100/0x15c) from [<c020f718>] (__dev_close_many+0x94/0xc8)

defer_bh() takes the lock which is hold during unlink_urbs(). The safe
walk suggest that the skb will be removed from the list and this is done
by defer_bh() so it seems to be okay to drop the lock here.

Cc: stable@kernel.org
Reported-by: AnÃ\255bal Almeida Pinto <anibal.pinto@efacec.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoroute: Remove redirect_genid
Steffen Klassert [Tue, 6 Mar 2012 21:21:10 +0000]
route: Remove redirect_genid

As we invalidate the inetpeer tree along with the routing cache now,
we don't need a genid to reset the redirect handling when the routing
cache is flushed.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoinetpeer: Invalidate the inetpeer tree along with the routing cache
Steffen Klassert [Tue, 6 Mar 2012 21:20:26 +0000]
inetpeer: Invalidate the inetpeer tree along with the routing cache

We initialize the routing metrics with the values cached on the
inetpeer in rt_init_metrics(). So if we have the metrics cached on the
inetpeer, we ignore the user configured fib_metrics.

To fix this issue, we replace the old tree with a fresh initialized
inet_peer_base. The old tree is removed later with a delayed work queue.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agomlx4_core: fix bug in modify_cq wrapper for resize flow.
Jack Morgenstein [Wed, 7 Mar 2012 05:56:35 +0000]
mlx4_core: fix bug in modify_cq wrapper for resize flow.

The actual FW command is called in procedure "handle_resize".
Code incorrectly invoked the FW command again (in good flow), in
the modify_cq wrapper function.

Fix by skipping second FW invocation unconditionally for resize.

Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoatl1c: set ATL1C_WORK_EVENT_RESET bit correctly
Dan Carpenter [Wed, 7 Mar 2012 00:02:04 +0000]
atl1c: set ATL1C_WORK_EVENT_RESET bit correctly

ATL1C_WORK_EVENT_RESET is zero so the original code here is a nop.  The
intent was to set the zero bit.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobridge: fix state reporting when port is disabled
Paulius Zaleckas [Tue, 6 Mar 2012 22:25:22 +0000]
bridge: fix state reporting when port is disabled

Now we have:
eth0: link *down*
br0: port 1(eth0) entered *forwarding* state

br_log_state(p) should be called *after* p->state is set
to BR_STATE_DISABLED.

Reported-by: Zilvinas Valinskas <zilvinas@wilibox.com>
Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobridge: br_log_state() s/entering/entered/
Paulius Zaleckas [Tue, 6 Mar 2012 22:25:14 +0000]
bridge: br_log_state() s/entering/entered/

When br_log_state() is reporting state it should say "entered"
istead of "entering" since state at this point is already
changed.

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoehea: restore multicast and rx_errors fields
Eric Dumazet [Tue, 6 Mar 2012 19:46:41 +0000]
ehea: restore multicast and rx_errors fields

Commit 239c562c94d (ehea: Add 64bit statistics) added a regression,
since we no longer report multicast & rx_errors fields, taken from
port->stats structure. These fields are updated in ehea_update_stats()
every second.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Tested-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
David S. Miller [Thu, 8 Mar 2012 06:49:01 +0000]
Merge branch 'fixes' of git://git./linux/kernel/git/jesse/openvswitch

7 years agoPCI: ignore pre-1.1 ASPM quirking when ASPM is disabled
Matthew Garrett [Tue, 6 Mar 2012 18:41:49 +0000]
PCI: ignore pre-1.1 ASPM quirking when ASPM is disabled

Right now we won't touch ASPM state if ASPM is disabled, except in the case
where we find a device that appears to be too old to reliably support ASPM.
Right now we'll clear it in that case, which is almost certainly the wrong
thing to do. The easiest way around this is just to disable the blacklisting
when ASPM is disabled.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

7 years agoopenvswitch: Fix checksum update for actions on UDP packets.
Jesse Gross [Tue, 6 Mar 2012 23:05:46 +0000]
openvswitch: Fix checksum update for actions on UDP packets.

When modifying IP addresses or ports on a UDP packet we don't
correctly follow the rules for unchecksummed packets.  This meant
that packets without a checksum can be given a incorrect new checksum
and packets with a checksum can become marked as being unchecksummed.
This fixes it to handle those requirements.

Signed-off-by: Jesse Gross <jesse@nicira.com>

7 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Wed, 7 Mar 2012 20:34:42 +0000]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless

7 years agoregulator: tps65910: Configure correct value for VDDCTRL vout reg
Laxman Dewangan [Wed, 7 Mar 2012 11:09:05 +0000]
regulator: tps65910: Configure correct value for VDDCTRL vout reg

As per datasheet, the voltage output is defined as
from SEL[6:0] = 3 to 64 (dec)
Vout= (SEL[6:0] × 12.5 mV + 562.5 mV)

The list_voltage returns the vout as
    600mV +  selector * 12.5mV

and so equivalent VSEL is selector + 3.
Adding 3 on selector when configuring VSEL register for
VDDCTRL output.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

7 years agodm raid: fix flush support
Jonathan E Brassow [Wed, 7 Mar 2012 19:09:48 +0000]
dm raid: fix flush support

Fix dm-raid flush support.

Both md and dm have support for flush, but the dm-raid target
forgot to set the flag to indicate that flushes should be
passed on.  (Important for data integrity e.g. with writeback cache
enabled.)

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

7 years agodm raid: set MD_CHANGE_DEVS when rebuilding
Jonathan E Brassow [Wed, 7 Mar 2012 19:09:47 +0000]
dm raid: set MD_CHANGE_DEVS when rebuilding

The 'rebuild' parameter is used to rebuild individual devices in an
array (e.g. resynchronize a RAID1 device or recalculate a parity device
in higher RAID).  The MD_CHANGE_DEVS flag must be set when this
parameter is given in order to write out the superblocks and make the
change take immediate effect.  The code that handles new devices in
super_load already sets MD_CHANGE_DEVS and 'FirstUse'.  (The 'FirstUse'
flag was being set as a special case for rebuilds in
super_init_validation.)

Add a condition for rebuilds in super_load to take care of both flags
without the special case in 'super_init_validation'.

Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

7 years agodm thin metadata: decrement counter after removing mapped block
Joe Thornber [Wed, 7 Mar 2012 19:09:44 +0000]
dm thin metadata: decrement counter after removing mapped block

Correct the number of mapped sectors shown on a thin device's
status line by decrementing td->mapped_blocks in __remove() each time
a block is removed.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

7 years agodm thin metadata: unlock superblock in init_pmd error path
Joe Thornber [Wed, 7 Mar 2012 19:09:43 +0000]
dm thin metadata: unlock superblock in init_pmd error path

If dm_sm_disk_create() fails the superblock must be unlocked.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Acked-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

7 years agodm thin metadata: remove incorrect close_device on creation error paths
Mike Snitzer [Wed, 7 Mar 2012 19:09:41 +0000]
dm thin metadata: remove incorrect close_device on creation error paths

The __open_device() error paths in __create_thin() and __create_snap()
incorrectly call __close_device() even if td was not initialized by
__open_device().  Remove this.

Also document __open_device() return values, remove a redundant
td->changed = 1 in __create_thin(), and insert an additional
safeguard against creating an already-existing device.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

7 years agodm flakey: fix crash on read when corrupt_bio_byte not set
Mike Snitzer [Wed, 7 Mar 2012 19:09:39 +0000]
dm flakey: fix crash on read when corrupt_bio_byte not set

The following BUG is hit on the first read that is submitted to a dm
flakey test device while the device is "down" if the corrupt_bio_byte
feature wasn't requested when the device's table was loaded.

Example DM table that will hit this BUG:
0 2097152 flakey 8:0 2048 0 30

This bug was introduced by commit a3998799fb4df0b0af8271a7d50c4269032397aa
(dm flakey: add corrupt_bio_byte feature) in v3.1-rc1.

BUG: unable to handle kernel paging request at ffff8801cfce3fff
IP: [<ffffffffa008c233>] corrupt_bio_data+0x6e/0xae [dm_flakey]
PGD 1606063 PUD 0
Oops: 0002 [#1] SMP
...
Call Trace:
 <IRQ>
 [<ffffffffa008c2b5>] flakey_end_io+0x42/0x48 [dm_flakey]
 [<ffffffffa00dca98>] clone_endio+0x54/0xb6 [dm_mod]
 [<ffffffff81130587>] bio_endio+0x2d/0x2f
 [<ffffffff811c819a>] req_bio_endio+0x96/0x9f
 [<ffffffff811c94b9>] blk_update_request+0x1dc/0x3a9
 [<ffffffff812f5ee2>] ? rcu_read_unlock+0x21/0x23
 [<ffffffff811c96a6>] blk_update_bidi_request+0x20/0x6e
 [<ffffffff811c9713>] blk_end_bidi_request+0x1f/0x5d
 [<ffffffff811c978d>] blk_end_request+0x10/0x12
 [<ffffffff8128f450>] scsi_io_completion+0x1e5/0x4b1
 [<ffffffff812882a9>] scsi_finish_command+0xec/0xf5
 [<ffffffff8128f830>] scsi_softirq_done+0xff/0x108
 [<ffffffff811ce284>] blk_done_softirq+0x84/0x98
 [<ffffffff81048d19>] __do_softirq+0xe3/0x1d5
 [<ffffffff8138f83f>] ? _raw_spin_lock+0x62/0x69
 [<ffffffff810997cf>] ? handle_irq_event+0x4c/0x61
 [<ffffffff8139833c>] call_softirq+0x1c/0x30
 [<ffffffff81003b37>] do_softirq+0x4b/0xa3
 [<ffffffff81048a39>] irq_exit+0x53/0xca
 [<ffffffff81398acd>] do_IRQ+0x9d/0xb4
 [<ffffffff81390333>] common_interrupt+0x73/0x73
...

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 3.1+
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

7 years agodm io: fix discard support
Milan Broz [Wed, 7 Mar 2012 19:09:37 +0000]
dm io: fix discard support

This patch fixes a crash by recognising discards in dm_io.

Currently dm_mirror can send REQ_DISCARD bios if running over a
discard-enabled device and without support in dm_io the system
crashes badly.

BUG: unable to handle kernel paging request at 00800000
IP:  __bio_add_page.part.17+0xf5/0x1e0
...
 bio_add_page+0x56/0x70
 dispatch_io+0x1cf/0x240 [dm_mod]
 ? km_get_page+0x50/0x50 [dm_mod]
 ? vm_next_page+0x20/0x20 [dm_mod]
 ? mirror_flush+0x130/0x130 [dm_mirror]
 dm_io+0xdc/0x2b0 [dm_mod]
...

Introduced in 2.6.38-rc1 by commit 5fc2ffeabb9ee0fc0e71ff16b49f34f0ed3d05b4
(dm raid1: support discard).

Signed-off-by: Milan Broz <mbroz@redhat.com>
Cc: stable@kernel.org
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

7 years agodm ioctl: do not leak argv if target message only contains whitespace
Jesper Juhl [Wed, 7 Mar 2012 19:09:34 +0000]
dm ioctl: do not leak argv if target message only contains whitespace

If 'argc' is zero we jump to the 'out:' label, but this leaks the
(unused) memory that 'dm_split_args()' allocated for 'argv' if the
string being split consisted entirely of whitespace.  Jump to the
'out_argv:' label instead to free up that memory.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: stable@kernel.org
Signed-off-by: Alasdair G Kergon <agk@redhat.com>

7 years agohwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804
Guenter Roeck [Mon, 5 Mar 2012 19:13:52 +0000]
hwmon: (jc42) Add support for AT30TS00, TS3000GB2, TSE2002GB2, and MCP9804

Also update IDT datasheet locations.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.0+
Acked-by: Jean Delvare <khali@linux-fr.org>

7 years agohwmon: (zl6100) Maintain delay parameter in driver instance data
Guenter Roeck [Wed, 7 Mar 2012 11:58:55 +0000]
hwmon: (zl6100) Maintain delay parameter in driver instance data

A global delay parameter has the side effect of being overwritten with 0 if a
single ZL2004 or ZL6105 is instantiated. If other chips supported by the same
driver are in the system, this will result in access errors for those chips.

To solve the problem, keep a per-instance copy of the delay parameter, and do
not change the original parameter.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org # 3.1+
Acked-by: Jean Delvare <khali@linux-fr.org>

7 years agohwmon: (pmbus_core) Fix maximum number of POUT alarm attributes
Guenter Roeck [Sun, 4 Mar 2012 16:10:57 +0000]
hwmon: (pmbus_core) Fix maximum number of POUT alarm attributes

There are up to three POUT alarm attributes, not two, since cap_alarm was added.

Reported-by: Michele Petracca <mi.petracca@gmail.com>
Cc: stable@vger.kernel.org # 3.0+ [3.0 will need backport]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

7 years agohwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000
Jean Delvare [Mon, 5 Mar 2012 13:32:00 +0000]
hwmon: (jc42) Add support for ST Microelectronics STTS2002 and STTS3000

These are fully compatible with Jedec JC 42.4 as far as I can see.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>

7 years agoMerge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Linus Torvalds [Wed, 7 Mar 2012 16:33:03 +0000]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM updates from Russell King.

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7358/1: perf: add PMU hotplug notifier
  ARM: 7357/1: perf: fix overflow handling for xscale2 PMUs
  ARM: 7356/1: perf: check that we have an event in the PMU IRQ handlers
  ARM: 7355/1: perf: clear overflow flag when disabling counter on ARMv7 PMU
  ARM: 7354/1: perf: limit sample_period to half max_period in non-sampling mode
  ARM: ecard: ensure fake vma vm_flags is setup
  ARM: 7346/1: errata: fix PL310 erratum #753970 workaround selection
  ARM: 7345/1: errata: update workaround for A9 erratum #743622
  ARM: 7348/1: arm/spear600: fix one-shot timer
  ARM: 7339/1: amba/serial.h: Include types.h for resolving dependency of type bool

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Wed, 7 Mar 2012 16:31:31 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov: "Just a few driver fixups,
nothing exciting."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - fix 3rd-gen Bamboo MT when 4+ fingers are in use
  Input: twl4030-vibra - use proper guard for PM methods
  Input: evdev - fix variable initialisation
  Input: wacom - add missing LEDS_CLASS to Kconfig
  Input: ALPS - fix touchpad detection when buttons are pressed

7 years agoC6X: fix KSTK_EIP and KSTK_ESP macros
Mark Salter [Wed, 7 Mar 2012 16:19:31 +0000]
C6X: fix KSTK_EIP and KSTK_ESP macros

There was a latent typo in the C6X KSTK_EIP and KSTK_ESP macros which
caused a problem with a new patch which used them. The broken definitions
were of the form:

  #define KSTK_FOO(tsk) (task_pt_regs(task)->foo)

Note the use of task vs tsk. This actually worked before because the
only place in the kernel which used these macros passed in a local
pointer named task.

Signed-off-by: Mark Salter <msalter@redhat.com>

7 years agoRevert "CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume"
Linus Torvalds [Wed, 7 Mar 2012 16:21:19 +0000]
Revert "CPU hotplug, cpusets, suspend: Don't touch cpusets during suspend/resume"

This reverts commit 8f2f748b0656257153bcf0941df8d6060acc5ca6.

It causes some odd regression that we have not figured out, and it's too
late in the -rc series to try to figure it out now.

As reported by Konstantin Khlebnikov, it causes consistent hangs on his
laptop (Thinkpad x220: 2x cores + HT).  They can be avoided by adding
calls to "rebuild_sched_domains();" in cpuset_cpu_[in]active() for the
CPU_{ONLINE/DOWN_FAILED/DOWN_PREPARE}_FROZEN cases, but it's not at all
clear why, and it makes no sense.

Konstantin's config doesn't even have CONFIG_CPUSETS enabled, just to
make things even more interesting.  So it's not the cpusets, it's just
the scheduling domains.

So until this is understood, revert.

Bisected-reported-and-tested-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrm/radeon: deal with errors from framebuffer init path.
Dave Airlie [Tue, 6 Mar 2012 10:44:40 +0000]
drm/radeon: deal with errors from framebuffer init path.

We've been getting occasional oops running a 32-bit kernel on a certain
system in our RHEL test hw. It appears that we fail to get sufficent ioremap
space for the framebuffer, and this leads to an oops.

This patch should fix the oops and leave a message in the logs we can
check for.

A future fix would probably to resize the console to a size that we can
ioremap.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon: fix a semaphore deadlock on pre cayman asics
Christian König [Wed, 7 Mar 2012 10:28:57 +0000]
drm/radeon: fix a semaphore deadlock on pre cayman asics

The out of order execution of semaphore commands on
pre cayman asics doesn't work correctly and can
cause deadlocks, so turn it off for now.

Signed-off-by: Christian König <deathsimple@vodafone.de>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agoARM: 7358/1: perf: add PMU hotplug notifier
Lorenzo Pieralisi [Tue, 6 Mar 2012 16:37:45 +0000]
ARM: 7358/1: perf: add PMU hotplug notifier

When a CPU is taken out of reset, either cold booted or hotplugged in,
some of its PMU registers can contain UNKNOWN values.

This patch adds a hotplug notifier to ARM core perf code so that upon
CPU restart the PMU unit is reset and becomes ready to use again.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>