7 years agoBtrfs: clean up for find_first_extent_bit()
Xiao Guangrong [Thu, 14 Jul 2011 03:19:45 +0000]
Btrfs: clean up for find_first_extent_bit()

find_first_extent_bit() and find_first_extent_bit_state() share
most of the code, and we can just make the former call the latter.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: clean up for wait_extent_bit()
Xiao Guangrong [Thu, 14 Jul 2011 03:19:27 +0000]
Btrfs: clean up for wait_extent_bit()

We can just use cond_resched_lock().

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: clean up for insert_state()
Xiao Guangrong [Thu, 14 Jul 2011 03:19:08 +0000]
Btrfs: clean up for insert_state()

Don't duplicate set_state_bits().

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: remove unused members from struct extent_state
Xiao Guangrong [Thu, 14 Jul 2011 03:18:52 +0000]
Btrfs: remove unused members from struct extent_state

These members are not used at all.

Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: clean up code for merging extent maps
Li Zefan [Thu, 14 Jul 2011 03:18:33 +0000]
Btrfs: clean up code for merging extent maps

unpin_extent_cache() and add_extent_mapping() shares the same code
that merges extent maps.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: clean up code for extent_map lookup
Li Zefan [Thu, 14 Jul 2011 03:18:15 +0000]
Btrfs: clean up code for extent_map lookup

lookup_extent_map() and search_extent_map() can share most of code.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: clean up search_extent_mapping()
Li Zefan [Thu, 14 Jul 2011 03:18:03 +0000]
Btrfs: clean up search_extent_mapping()

rb_node returned by __tree_search() can be a valid pointer or NULL,
but won't be some errno.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: remove redundant code for dir item lookup
Li Zefan [Thu, 14 Jul 2011 03:17:52 +0000]
Btrfs: remove redundant code for dir item lookup

When we search a dir item with a specific hash code, we can
just return NULL without further checking if btrfs_search_slot()
returns 1.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: make acl functions really no-op if acl is not enabled
Li Zefan [Thu, 14 Jul 2011 03:17:39 +0000]
Btrfs: make acl functions really no-op if acl is not enabled

So there's no overhead for something we don't use.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: remove remaining ref-cache code
Li Zefan [Thu, 14 Jul 2011 03:17:27 +0000]
Btrfs: remove remaining ref-cache code

Since commit f2a97a9dbd86eb1ef956bdf20e05c507b32beb96
("btrfs: remove all unused functions"), there's no extern functions
at all in ref-cache.c, so just remove the remaining dead code.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: remove a BUG_ON() in btrfs_commit_transaction()
Li Zefan [Thu, 14 Jul 2011 03:17:14 +0000]
Btrfs: remove a BUG_ON() in btrfs_commit_transaction()

wait_for_commit() always returns 0.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: use wait_event()
Li Zefan [Thu, 14 Jul 2011 03:17:00 +0000]
Btrfs: use wait_event()

Use wait_event() when possible to avoid code duplication.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: check the nodatasum flag when writing compressed files
Li Zefan [Thu, 14 Jul 2011 03:16:47 +0000]
Btrfs: check the nodatasum flag when writing compressed files

If mounting with nodatasum option, we won't csum file data for
general write or direct-io write, and this rule should also be
applied when writing compressed files.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: copy string correctly in INO_LOOKUP ioctl
Li Zefan [Thu, 14 Jul 2011 03:16:00 +0000]
Btrfs: copy string correctly in INO_LOOKUP ioctl

Memory areas [ptr, ptr+total_len] and [name, name+total_len]
may overlap, so it's wrong to use memcpy().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: don't print the leaf if we had an error
Josef Bacik [Wed, 13 Jul 2011 15:03:50 +0000]
Btrfs: don't print the leaf if we had an error

In __btrfs_free_extent we will print the leaf if we fail to find the extent we
wanted, but the problem is if we get an error we won't have a leaf so often this
leads to a NULL pointer dereference and we lose the error that actually
occurred.  So only print the leaf if ret > 0, which means we didn't find the
item we were looking for but we didn't error either.  This way the error is
preserved.

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agobtrfs: make btrfs_set_root_node void
Mark Fasheh [Thu, 14 Jul 2011 21:23:06 +0000]
btrfs: make btrfs_set_root_node void

This is fairly trivial - btrfs_set_root_node() - always returns zero so we
can just make it void.  All callers ignore the return code now anyway.  I
also made sure to check that none of the functions that
btrfs_set_root_node() calls returns an error that we might have needed to
catch and pass back.

Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: fix oops while writing data to SSD partitions
liubo [Wed, 27 Jul 2011 09:49:18 +0000]
Btrfs: fix oops while writing data to SSD partitions

Here I have a two SSD-partitions btrfs, and they are defaultly set to
"data=raid0, metadata=raid1", then I try to fill my btrfs partition
till "No space left on device", via "dd if=/dev/zero of=/mnt/btrfs/tmp".

I get an oops panic from kernel BUG at fs/btrfs/extent-tree.c:5199!, which
refers to find_free_extent's
BUG_ON(index != get_block_group_index(block_group));

In SSD mode, in order to find enough space to alloc, we may check the
block_group cache which has been checked sometime before, but the index is not
updated, where it hits the BUG_ON.

Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Acked-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: Protect the readonly flag of block group
WuBo [Tue, 26 Jul 2011 03:30:11 +0000]
Btrfs: Protect the readonly flag of block group

The access for ro in btrfs_block_group_cache should be protected
because of the racy lock in relocation.

Signed-off-by: Wu Bo <wu.bo@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agobtrfs: Make extent-io callbacks that never fail return void
Jeff Mahoney [Thu, 21 Jul 2011 16:56:09 +0000]
btrfs: Make extent-io callbacks that never fail return void

The set/clear bit and the extent split/merge hooks only ever return 0.

 Changing them to return void simplifies the error handling cases later.

 This patch changes the hook prototypes, the single implementation of each,
 and the functions that call them to return void instead.

 Since all four of these hooks execute under a spinlock, they're necessarily
 simple.

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: fix readahead in file defrag
Li Zefan [Wed, 20 Jul 2011 03:46:35 +0000]
Btrfs: fix readahead in file defrag

We passed the wrong value to btrfs_force_ra(). Fix this by changing
the argument of btrfs_force_ra() from last_index to nr_page.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs: return error to caller when btrfs_unlink() failes
Tsutomu Itoh [Tue, 19 Jul 2011 07:27:20 +0000]
Btrfs: return error to caller when btrfs_unlink() failes

When btrfs_unlink_inode() and btrfs_orphan_add() in btrfs_unlink()
are error, the error code is returned to the caller instead of
BUG_ON().

Signed-off-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoBtrfs:don't check the return value of __btrfs_add_inode_defrag
Wanlong Gao [Mon, 18 Jul 2011 12:19:35 +0000]
Btrfs:don't check the return value of __btrfs_add_inode_defrag

Don't need to check the return value of __btrfs_add_inode_defrag(),
since it will always return 0.

Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoMerge branch 'alloc_path' of git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh...
Chris Mason [Mon, 1 Aug 2011 18:27:34 +0000]
Merge branch 'alloc_path' of git://git./linux/kernel/git/mfasheh/btrfs-error-handling into for-linus

7 years agokdb,kgdb: Allow arbitrary kgdb magic knock sequences
Jason Wessel [Tue, 24 May 2011 15:43:06 +0000]
kdb,kgdb: Allow arbitrary kgdb magic knock sequences

The first packet that gdb sends when the kernel is in kdb mode seems
to change with every release of gdb.  Instead of continuing to add
many different gdb packets, change kdb to automatically look for any
thing that looks like a gdb packet.

Example 1 cold start test:
echo g > /proc/sysrq-trigger
$D#44+

Example 2 cold start test:
echo g > /proc/sysrq-trigger
$3#33

The second one should re-enter kdb's shell right away and is purely a
test.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

7 years agokdb: Remove all references to DOING_KGDB2
Jason Wessel [Mon, 23 May 2011 18:22:54 +0000]
kdb: Remove all references to DOING_KGDB2

The DOING_KGDB2 was originally a state variable for one of the two
ways to automatically transition from kdb to kgdb.  Purge all these
variables and just use one single state for the transition.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

7 years agokdb,kgdb: Implement switch and pass buffer from kdb -> gdb
Jason Wessel [Mon, 23 May 2011 18:17:41 +0000]
kdb,kgdb: Implement switch and pass buffer from kdb -> gdb

When switching from kdb mode to kgdb mode packets were getting lost
depending on the size of the fifo queue of the serial chip.  When gdb
initially connects if it is in kdb mode it should entirely send any
character buffer over to the gdbstub when switching connections.

Previously kdb was zero'ing out the character buffer and this could
lead to gdb failing to connect at all, or a lengthy pause could occur
on the initial connect.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

7 years agokdb: cleanup unused variables missed in the original kdb merge
Jason Wessel [Thu, 30 Jun 2011 19:12:00 +0000]
kdb: cleanup unused variables missed in the original kdb merge

The BTARGS and BTSYMARG variables do not have any function in the
mainline version of kdb.

Reported-by: Tim Bird <tim.bird@am.sony.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>

7 years agoMerge branch 'for-next' into for-linus
Liam Girdwood [Mon, 1 Aug 2011 17:25:06 +0000]
Merge branch 'for-next' into for-linus

7 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Mon, 1 Aug 2011 16:14:25 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  CIFS: Cleanup demupltiplex thread exiting code
  CIFS: Move mid search to a separate function
  CIFS: Move RFC1002 check to a separate function
  CIFS: Simplify socket reading in demultiplex thread
  CIFS: Move buffer allocation to a separate function
  cifs: remove unneeded variable initialization in cifs_reconnect_tcon
  cifs: simplify refcounting for oplock breaks
  cifs: fix compiler warning in CIFSSMBQAllEAs
  cifs: fix name parsing in CIFSSMBQAllEAs
  cifs: don't start signing too early
  cifs: trivial: goto out here is unnecessary
  cifs: advertise the right receive buffer size to the server

7 years agoMerge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Mon, 1 Aug 2011 16:13:48 +0000]
Merge branch 'gpio/next' of git://git.secretlab.ca/git/linux-2.6

* 'gpio/next' of git://git.secretlab.ca/git/linux-2.6:
  gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers
  gpio_msm: Move Qualcomm v6 MSM driver into drivers
  msm: gpio: Fold register defs into C file
  msm: gpiomux: Move public API to public header
  msm: gpio: Remove ifdefs on gpio chip registers
  msm: gpio: Remove chip-specific register definitions
  msm: Remove chip-ifdefs for GPIO io mappings
  msm: gpio: Remove unsupported devices
  gpio: ab8500: fix MODULE_ALIAS for ab8500
  of/gpio: export of_gpio_simple_xlate

7 years agoMerge branch 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux
Linus Torvalds [Mon, 1 Aug 2011 16:13:05 +0000]
Merge branch 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux

* 'for-3.1-rc1' of git://gitorious.org/linux-omap-dss2/linux: (31 commits)
  OMAP: DSS2: HDMI: fix hdmi clock name
  HACK: OMAP: DSS2: clk hack for OMAP2/3
  OMAP: DSS2: DSS: Fix context save/restore
  OMAP: DSS2: DISPC: Fix context save/restore
  OMAP: DSS2: Remove ctx loss count from dss.c
  OMAP: DSS2: Remove unused code from display.c
  OMAP: DSS2: DISPC: remove finegrained clk enables/disables
  OMAP: DSS2: Remove unused opt_clock_available
  OMAP: DSS2: Use PM runtime & HWMOD support
  OMAP: DSS2: Remove CONFIG_OMAP2_DSS_SLEEP_BEFORE_RESET
  OMAP: DSS2: Remove core_dump_clocks
  OMAP: DSS2: DPI: remove unneeded SYSCK enable/disable
  OMAP: DSS2: Use omap_pm_get_dev_context_loss_count to get ctx loss count
  OMAP: DSS2: rewrite use of context_loss_count
  OMAP: DSS2: Remove clk optimization at dss init
  OMAP: DSS2: Fix init and unit sequence
  OMAP: DSS2: Clean up probe for DSS & DSI
  OMAP: DSS2: Handle dpll4_m4_ck in dss_get/put_clocks
  OMAP: DSS2: Fix FIFO threshold and burst size for OMAP4
  OMAP: DSS2: DSI: sync when disabling a display
  ...

7 years agoMerge branch 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal...
Linus Torvalds [Mon, 1 Aug 2011 16:10:16 +0000]
Merge branch 'sh-latest' of git://git./linux/kernel/git/lethal/sh-3.x

* 'sh-latest' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-3.x: (39 commits)
  SH: static should be at beginning of declaration
  sh: move CLKDEV_xxx_ID macro to sh_clk.h
  sh: clock-shx3: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7786: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7785: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7757: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7343: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7722: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7724: add CLKDEV_ICK_ID for cleanup
  sh: clock-sh7366: modify I2C clock settings
  sh: clock-sh7343: modify I2C clock settings
  sh: clock-sh7723: modify I2C clock settings
  sh: clock-sh7722: modify I2C clock settings
  sh: clock-sh7724: modify I2C clock settings
  serial: sh-sci: Fix up pretty name printing for port IRQs.
  serial: sh-sci: Kill off per-port enable/disable callbacks.
  serial: sh-sci: Add missing module description/author bits.
  serial: sh-sci: Regtype probing doesn't need to be fatal.
  sh: Tidy up pre-clkdev clk_get() error handling.
  ...

7 years agoinput: xilinx_ps2: Add missing of_address.h header
Michal Simek [Wed, 13 Jul 2011 13:46:21 +0000]
input: xilinx_ps2: Add missing of_address.h header

Add missing header.

Error log:
CC drivers/input/serio/xilinx_ps2.o
drivers/input/serio/xilinx_ps2.c: In function 'xps2_of_probe':
drivers/input/serio/xilinx_ps2.c:249: error: implicit declaration of function 'of_address_to_resource'

Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agoMerge branch 'msm-move-gpio' of git://codeaurora.org/quic/kernel/davidb/linux-msm...
Grant Likely [Mon, 1 Aug 2011 14:16:05 +0000]
Merge branch 'msm-move-gpio' of git://codeaurora.org/quic/kernel/davidb/linux-msm into gpio/next

Conflicts:
drivers/gpio/Kconfig
drivers/gpio/Makefile

7 years agoCIFS: Cleanup demupltiplex thread exiting code
Pavel Shilovsky [Mon, 1 Aug 2011 09:19:44 +0000]
CIFS: Cleanup demupltiplex thread exiting code

Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

7 years agoCIFS: Move mid search to a separate function
Pavel Shilovsky [Mon, 1 Aug 2011 09:19:43 +0000]
CIFS: Move mid search to a separate function

Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

7 years agoCIFS: Move RFC1002 check to a separate function
Pavel Shilovsky [Mon, 1 Aug 2011 09:19:42 +0000]
CIFS: Move RFC1002 check to a separate function

Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

7 years agoCIFS: Simplify socket reading in demultiplex thread
Pavel Shilovsky [Mon, 1 Aug 2011 09:19:41 +0000]
CIFS: Simplify socket reading in demultiplex thread

Move reading to separate function and remove csocket variable.

Also change semantic in a little: goto incomplete_rcv only when
we get -EAGAIN (or a familiar error) while reading rfc1002 header.
In this case we don't check for echo timeout when we don't get whole
header at once, as it was before.

Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

7 years agoext4: use ext4_kvzalloc()/ext4_kvmalloc() for s_group_desc and s_group_info
Theodore Ts'o [Mon, 1 Aug 2011 12:45:38 +0000]
ext4: use ext4_kvzalloc()/ext4_kvmalloc() for s_group_desc and s_group_info

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

7 years agoext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and ext4_kvfree()
Theodore Ts'o [Mon, 1 Aug 2011 12:45:02 +0000]
ext4: introduce ext4_kvmalloc(), ext4_kzalloc(), and ext4_kvfree()

Introduce new helper functions which try kmalloc, and then fall back
to vmalloc if necessary, and use them for allocating and deallocating
s_flex_groups.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

7 years agoCIFS: Move buffer allocation to a separate function
Pavel Shilovsky [Mon, 1 Aug 2011 09:19:40 +0000]
CIFS: Move buffer allocation to a separate function

Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Pavel Shilovsky <piastryyy@gmail.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>

7 years agogpio_msm: Move Qualcomm MSM v2 gpio driver into drivers
David Brown [Mon, 16 May 2011 22:53:38 +0000]
gpio_msm: Move Qualcomm MSM v2 gpio driver into drivers

Migrate the driver for the v7-based MSM chips into drivers/gpio.  The
driver is unchanged, only moved.

Change-Id: I810db5b50b71cdca4e869aa0d0310f7f48781a55
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

7 years agogpio_msm: Move Qualcomm v6 MSM driver into drivers
David Brown [Mon, 16 May 2011 20:57:39 +0000]
gpio_msm: Move Qualcomm v6 MSM driver into drivers

Migrate the driver for the v6-based MSM chips into drivers/gpio.  The
driver is unchanged, only moved.

Change-Id: I03ba597b95b4d62b42da112a8efac88d67aa40f9
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

7 years agomsm: gpio: Fold register defs into C file
David Brown [Mon, 6 Jun 2011 21:09:45 +0000]
msm: gpio: Fold register defs into C file

No need to have a separate header file containing only register
definitions that are used by a single driver.  Fold these into the
gpio driver.

Signed-off-by: David Brown <davidb@codeaurora.org>

7 years agomsm: gpiomux: Move public API to public header
David Brown [Mon, 16 May 2011 20:32:15 +0000]
msm: gpiomux: Move public API to public header

The gpiomux.h header contains some SOC ifdefs.  However, the API that
is actually used by the GPIO driver only uses two functions that are
general.  Move these general definitions into a public header file.

Change-Id: Ia5df8af87dba268225598d56908e523bcfc24ef6
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

7 years agomsm: gpio: Remove ifdefs on gpio chip registers
David Brown [Thu, 12 May 2011 08:28:01 +0000]
msm: gpio: Remove ifdefs on gpio chip registers

Select the GPIO register configuration at runtime rather than through
idefs.

Change-Id: I02ea0a3d61bc81669f32097c32420f0688552231
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

7 years agomsm: gpio: Remove chip-specific register definitions
David Brown [Thu, 12 May 2011 08:16:46 +0000]
msm: gpio: Remove chip-specific register definitions

Put an SOC prefix on each GPIO register definition, eliminating the
need to have SOC ifdefs around the definitions.

Change-Id: I5a01fd328a89ce1be610847934d6e118f5465e42
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

7 years agomsm: Remove chip-ifdefs for GPIO io mappings
David Brown [Thu, 12 May 2011 07:54:36 +0000]
msm: Remove chip-ifdefs for GPIO io mappings

The two GPIO controllers are always mapped to the same virtual address
across all MSM devices.  Instead of selecting this at compile time,
determine the physical address at runtime, eliminating yet something
else preventing multiple MSM targets from being compiled into the same
kernel.

Change-Id: I1672219d978ab6243526adeda6badf49472baa27
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

7 years agomsm: gpio: Remove unsupported devices
David Brown [Thu, 12 May 2011 07:33:38 +0000]
msm: gpio: Remove unsupported devices

The MSM7x25 and MSM7x27 devices are not yet supported in the kernel.
Remove #ifdef-based tables supporting these chips for now.

Change-Id: I4d9f5abc4cc0942ce75a067097b072489493c1b8
Signed-off-by: David Brown <davidb@codeaurora.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Nicolas Pitre <nicolas.pitre@linaro.org>

7 years agoOMAP: DSS2: HDMI: fix hdmi clock name
Tomi Valkeinen [Mon, 1 Aug 2011 11:54:44 +0000]
OMAP: DSS2: HDMI: fix hdmi clock name

The HDMI clock (hdmi_clk) is missing in the current OMAP4 HWMOD
database. Fix this in the DSS driver by using the old clock name
(dss_48mhz_clk).

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

7 years agoHACK: OMAP: DSS2: clk hack for OMAP2/3
Tomi Valkeinen [Mon, 1 Aug 2011 11:32:23 +0000]
HACK: OMAP: DSS2: clk hack for OMAP2/3

The HWMOD data for OMAP2 and 3 are currently not up to date regarding
DSS (OMAP4 HWMOD data is fine). This patch makes the DSS driver to get
the opt clocks needed for OMAP2/3 with the old clock names, thus
allowing DSS driver to use runtime PM.

The HWMOD databases should be fixes ASAP, and this patch can be reverted
after that.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

7 years agoof: address: use resource_size helper
Felipe Balbi [Fri, 22 Jul 2011 19:47:21 +0000]
of: address: use resource_size helper

that should be the approved way of calculating
the size of resources. No functional changes.

Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agoext4: use the correct error exit path in ext4_init_inode_table()
Yongqiang Yang [Mon, 1 Aug 2011 10:32:19 +0000]
ext4: use the correct error exit path in ext4_init_inode_table()

This patch lets ext4_init_inode_table() handle errors right.
ext4_init_inode_table() should down_write() alloc_sem which
has been up_write()ed and stop the started journal handle.

Signed-off-by: Yongqiang Yang <xiaoqiangnk@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

7 years agoALSA: asihpi - Don't leak firmware if mem alloc fails
Jesper Juhl [Sun, 31 Jul 2011 21:16:43 +0000]
ALSA: asihpi - Don't leak firmware if mem alloc fails

We leak the memory allocated to 'firmware' when we fail to
release_firmware() after a kmalloc() failure in hpi_dsp_code_open().
This patch should take care of the leak.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoxfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set
Markus Trippelsdorf [Tue, 26 Jul 2011 09:15:20 +0000]
xfs: Fix build breakage in xfs_iops.c when CONFIG_FS_POSIX_ACL is not set

commit 4e34e719e45, that takes the ACL checks to common code,
accidentely broke the build when CONFIG_FS_POSIX_ACL is not set:

CC fs/xfs/linux-2.6/xfs_iops.o
fs/xfs/linux-2.6/xfs_iops.c:1025:14: error: ‘xfs_get_acl’ undeclared here (not in a function)

Fix this by declaring xfs_get_acl a static inline function.

Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoVFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock
David Howells [Tue, 7 Jun 2011 13:09:30 +0000]
VFS: Reorganise shrink_dcache_for_umount_subtree() after demise of dcache_lock

Reorganise shrink_dcache_for_umount_subtree() in light of the demise of
dcache_lock.  Without that dcache_lock, there is no need for the batching of
removal of dentries from the system under it (we wanted to make intensive use
of the locked data whilst we held it, but didn't want to hold it for long at a
time).

This works, provided the preceding patch is correct in its removal of locking
on dentry->d_lock on the basis that no one should be locking these dentries any
more as the whole superblock is defunct.

With this patch, the calls to dentry_lru_del() and __d_shrink() are placed at
the point where each dentry is detached handled.

It is possible that, as an alternative, the batching should still be done -
but only for dentry_lru_del() of all a dentry's children in one go.  In such a
case, the batching would be done under dcache_lru_lock.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoVFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree()
David Howells [Tue, 7 Jun 2011 13:09:20 +0000]
VFS: Remove dentry->d_lock locking from shrink_dcache_for_umount_subtree()

Locks of the dcache_lock were replaced by locks of dentry->d_lock in commits
such as:

2304450783dfde7b0b94ae234edd0dbffa865073
2fd6b7f50797f2e993eea59e0a0b8c6399c811dc

as part of the RCU-based pathwalk changes, despite the fact that the caller
(shrink_dcache_for_umount()) notes in the banner comment the reasons that
d_lock is not necessary in these functions:

/*
 * destroy the dentries attached to a superblock on unmounting
 * - we don't need to use dentry->d_lock because:
 *   - the superblock is detached from all mountings and open files, so the
 *     dentry trees will not be rearranged by the VFS
 *   - s_umount is write-locked, so the memory pressure shrinker will ignore
 *     any dentries belonging to this superblock that it comes across
 *   - the filesystem itself is no longer permitted to rearrange the dentries
 *     in this superblock
 */

So remove these locks.  If the locks are actually necessary, then this banner
comment should be altered instead.

The hash table chains are protected by 1-bit locks in the hash table heads, so
those shouldn't be a problem.

Note that to make this work, __d_drop() has to be split so that the RCUwalk
barrier can be avoided.  This causes problems otherwise as it has an assertion
that dentry->d_lock is locked - but there is no need for that as no one else
can be trying to access this dentry, except to step over it (and that should
be handled by d_free(), I think).

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoVFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree()
David Howells [Tue, 7 Jun 2011 13:09:10 +0000]
VFS: Remove detached-dentry counter from shrink_dcache_for_umount_subtree()

Remove the detached-dentry counter from shrink_dcache_for_umount_subtree() as
the value it computes is no longer used as of commit
312d3ca856d369bb04d0443846b85b4cdde6fa8a which made the nr_dentry counters
summed per-CPU rather than global atomic.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoswitch posix_acl_chmod() to umode_t
Al Viro [Sat, 23 Jul 2011 23:03:11 +0000]
switch posix_acl_chmod() to umode_t

again, that's what all callers pass to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoswitch posix_acl_from_mode() to umode_t
Al Viro [Sat, 23 Jul 2011 23:01:48 +0000]
switch posix_acl_from_mode() to umode_t

... seeing that this is what all callers pass to it anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoswitch posix_acl_equiv_mode() to umode_t *
Al Viro [Sat, 23 Jul 2011 22:56:36 +0000]
switch posix_acl_equiv_mode() to umode_t *

... so that &inode->i_mode could be passed to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoswitch posix_acl_create() to umode_t *
Al Viro [Sat, 23 Jul 2011 22:37:50 +0000]
switch posix_acl_create() to umode_t *

so we can pass &inode->i_mode to it

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoblock: initialise bd_super in bdget()
Lachlan McIlroy [Thu, 30 Jun 2011 01:01:45 +0000]
block: initialise bd_super in bdget()

bd_super is currently reset to NULL in kill_block_super() so we rely on previous
users of the block_device object to initialise this value for the next user.
This quirk was exposed on RHEL5 when a third party filesystem did not always use
kill_block_super() and therefore bd_super wasn't being reset when a block_device
object was recycled within the cache.  This may not be a problem upstream but
makes sense to be defensive.

Signed-off-by: Lachlan McIlroy <lmcilroy@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agovfs: avoid call to inode_lru_list_del() if possible
Eric Dumazet [Thu, 28 Jul 2011 04:55:13 +0000]
vfs: avoid call to inode_lru_list_del() if possible

inode_lru_list_del() is expensive because of per superblock lru locking,
while some inodes are not in lru list.

Adding a check in iput_final() can speedup pipe/sockets workloads on
SMP.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agovfs: avoid taking inode_hash_lock on pipes and sockets
Eric Dumazet [Thu, 28 Jul 2011 04:41:09 +0000]
vfs: avoid taking inode_hash_lock on pipes and sockets

Some inodes (pipes, sockets, ...) are not hashed, no need to take
contended inode_hash_lock at dismantle time.

nice speedup on SMP machines on socket intensive workloads.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agovfs: conditionally call inode_wb_list_del()
Eric Dumazet [Thu, 28 Jul 2011 04:11:47 +0000]
vfs: conditionally call inode_wb_list_del()

Some inodes (pipes, sockets, ...) are not in bdi writeback list.

evict() can avoid calling inode_wb_list_del() and its expensive spinlock
by checking inode i_wb_list being empty or not.

At this point, no other cpu/user can concurrently manipulate this inode
i_wb_list

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoVFS: Fix automount for negative autofs dentries
David Howells [Mon, 11 Jul 2011 13:20:57 +0000]
VFS: Fix automount for negative autofs dentries

Autofs may set the DCACHE_NEED_AUTOMOUNT flag on negative dentries.  These
need attention from the automounter daemon regardless of the LOOKUP_FOLLOW flag.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoBtrfs: load the key from the dir item in readdir into a fake dentry
Josef Bacik [Tue, 28 Jun 2011 20:18:59 +0000]
Btrfs: load the key from the dir item in readdir into a fake dentry

In btrfs we have 2 indexes for inodes.  One is for readdir, it's in this nice
sequential order and works out brilliantly for readdir.  However if you use ls,
it usually stat's each file it gets from readdir.  This is where the second
index comes in, which is based on a hash of the name of the file.  So then the
lookup has to lookup this index, and then lookup the inode.  The index lookup is
going to be in random order (since its based on the name hash), which gives us
less than stellar performance.  Since we know the inode location from the
readdir index, I create a dummy dentry and copy the location key into
dentry->d_fsdata.  Then on lookup if we have d_fsdata we use that location to
lookup the inode, avoiding looking up the other directory index.  Thanks,

Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

7 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
Linus Torvalds [Mon, 1 Aug 2011 00:31:44 +0000]
Merge branch 'for-next' of git://git./linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (46 commits)
  mfd: Fix mismatch in twl4030 mutex lock-unlock
  mfd: twl6030-pwm.c needs MODULE_LICENSE
  mfd: Fix the omap-usb-host clock API usage on usbhs_disable()
  mfd: Acknowledge WM8994 IRQs before reporting
  mfd: Acknowlege all WM831x IRQs before we handle them
  mfd: Avoid two assignments if failures happen in tps65910_i2c_probe
  regulator: Storing tps65912 error codes in u8
  mfd: Don't leak init_data in tps65910_i2c_probe
  regulator: aat2870: Add AAT2870 regulator driver
  backlight: Add AAT2870 backlight driver
  mfd: Add AAT2870 mfd driver
  mfd: Remove dead code from max8997-irq
  mfd: Move TPS55910 Kconfig option
  mfd: Fix missing stmpe kerneldoc
  mfd: Fix off-by-one value range checking for tps65912_i2c_write
  mfd: Add devices for WM831x clocking module
  mfd: Remove comp{1,2}_threshold sysfs entries in tps65911_comparator_remove
  mfd: Don't ask about the TPS65912 core driver in Kconfig
  mfd: Fix off by one in WM831x IRQ code
  mfd: Add tps65921 support from twl-core
  ...

7 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux...
Linus Torvalds [Mon, 1 Aug 2011 00:30:59 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/math-emu: Remove unnecessary code
  m68k/math-emu: Remove commented out old code
  m68k: Kill warning in setup_arch() when compiling for Sun3
  m68k/atari: Prefix GPIO_{IN,OUT} with CODEC_
  sparc: iounmap() and *_free_coherent() - Use lookup_resource()
  m68k/atari: Reserve some ST-RAM early on for device buffer use
  m68k/amiga: Chip RAM - Use lookup_resource()
  resources: Add lookup_resource()
  sparc: _sparc_find_resource() should check for exact matches
  m68k/amiga: Chip RAM - Offset resource end by CHIP_PHYSADDR
  m68k/amiga: Chip RAM - Use resource_size() to fix off-by-one error
  m68k/amiga: Chip RAM - Change chipavail to an atomic_t
  m68k/amiga: Chip RAM - Always allocate from the start of memory
  m68k/amiga: Chip RAM - Convert from printk() to pr_*()
  m68k/amiga: Chip RAM - Use tabs for indentation

7 years agoNFS: Re-enable compilation of nfs with !CONFIG_NFS_V4 || !CONFIG_NFS_V4_1
Trond Myklebust [Sun, 31 Jul 2011 20:39:04 +0000]
NFS: Re-enable compilation of nfs with !CONFIG_NFS_V4 || !CONFIG_NFS_V4_1

Fix two recently introduced compile problems:

Fix a typo in fs/nfs/pnfs.h

Move the pnfs_blksize declaration outside the CONFIG_NFS_V4 section in
struct nfs_server.

Reported-by: Jens Axboe <jaxboe@fusionio.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agomfd: Fix mismatch in twl4030 mutex lock-unlock
Sanjeev Premi [Mon, 11 Jul 2011 15:20:31 +0000]
mfd: Fix mismatch in twl4030 mutex lock-unlock

A mutex is locked on entry into twl4030_madc_conversion().
Immediate return on some error conditions leaves the
mutex locked.

This patch ensures that mutex is always unlocked before
leaving the function.

Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: twl6030-pwm.c needs MODULE_LICENSE
Randy Dunlap [Sat, 23 Jul 2011 00:17:08 +0000]
mfd: twl6030-pwm.c needs MODULE_LICENSE

twl6030_pwm: module license 'unspecified' taints kernel.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Hemanth V <hemanthv@ti.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Fix the omap-usb-host clock API usage on usbhs_disable()
Keshava Munegowda [Fri, 22 Jul 2011 13:09:30 +0000]
mfd: Fix the omap-usb-host clock API usage on usbhs_disable()

usbhs_disable function was invoking clk_enable() instead of
clk_disable(), thus only increasing the clock usage counter and
preventing this particular clock from being ever turned off.
Because of this, the power domain of omap4 the USB Host subsystem
would never reach lower power states.This patch calls clk_disable()
in usbhs_disable function

Signed-off-by: Keshava Munegowda <keshava_mgowda@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Acknowledge WM8994 IRQs before reporting
Mark Brown [Thu, 21 Jul 2011 09:09:24 +0000]
mfd: Acknowledge WM8994 IRQs before reporting

This ensures we never have a window where we've handled an interrupt but
not told the hardware about it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Acknowlege all WM831x IRQs before we handle them
Mark Brown [Wed, 20 Jul 2011 16:05:13 +0000]
mfd: Acknowlege all WM831x IRQs before we handle them

Ensure that we never have a window where we've handled an interrupt (and
therefore need to be notified of new events) but haven't yet told the
interrupt controller that this is the case (so any new events will be
discarded).

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Avoid two assignments if failures happen in tps65910_i2c_probe
Jesper Juhl [Wed, 13 Jul 2011 21:22:26 +0000]
mfd: Avoid two assignments if failures happen in tps65910_i2c_probe

In drivers/mfd/tps65910.c:tps65910_i2c_probe() there's potential for a
tiny optimization.

We assign to init_data->irq and init_data->irq_base long before we
need them, and there are two potential exits from the function before
they are needed.

Moving the assignments below these two potential exits means we
completely avoid doing them in these two (failure) cases.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Graeme Gregory <gg@slimlogic.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agoregulator: Storing tps65912 error codes in u8
Dan Carpenter [Wed, 6 Jul 2011 18:57:18 +0000]
regulator: Storing tps65912 error codes in u8

get_ctrl_reg() returns -EINVAL so the error handling won't work here
if reg is a u8.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Don't leak init_data in tps65910_i2c_probe
Jesper Juhl [Tue, 5 Jul 2011 22:29:07 +0000]
mfd: Don't leak init_data in tps65910_i2c_probe

There are a couple of situations where we leak init_data in
drivers/mfd/tps65910.c:tps65910_i2c_probe() - this patch should take
care of them.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agoregulator: aat2870: Add AAT2870 regulator driver
Jin Park [Mon, 4 Jul 2011 08:43:42 +0000]
regulator: aat2870: Add AAT2870 regulator driver

Add regulator driver for AnalogicTech AAT2870.

Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agobacklight: Add AAT2870 backlight driver
Jin Park [Wed, 29 Jun 2011 14:06:51 +0000]
backlight: Add AAT2870 backlight driver

Add backlight driver for AnalogicTech AAT2870.

Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Add AAT2870 mfd driver
Jin Park [Mon, 4 Jul 2011 17:48:12 +0000]
mfd: Add AAT2870 mfd driver

Add mfd core driver for AnalogicTech AAT2870.
The AAT2870 is communication through I2C and contains backlight and
regulator components.

Signed-off-by: Jin Park <jinyoungp@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Remove dead code from max8997-irq
Jesper Juhl [Sat, 2 Jul 2011 20:38:11 +0000]
mfd: Remove dead code from max8997-irq

We either hit one of the case's or the default in the switch statement
in get_i2c(), so the 'return ERR_PTR(-EINVAL);' at the end of the
function is just dead code - remove it.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Move TPS55910 Kconfig option
Linus Walleij [Mon, 4 Jul 2011 15:34:16 +0000]
mfd: Move TPS55910 Kconfig option

Having another TPS chip at the end of the Kconfig when all it's
relatives are grouped together in their own section seems totally
counter-intuitive. Move it, also in the Makefile.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Fix missing stmpe kerneldoc
Om Prakash [Mon, 27 Jun 2011 07:54:22 +0000]
mfd: Fix missing stmpe kerneldoc

Generating kerneldoc for STMPE result in warnings, so fix this by
adding missing documentation.

Signed-off-by: Om Prakash <omprakash.pal@stericsson.com>
Reviewed-by: Rabin Vincent <rabin.vincent@stericsson.com>
Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com>
Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Fix off-by-one value range checking for tps65912_i2c_write
Axel Lin [Fri, 24 Jun 2011 07:34:16 +0000]
mfd: Fix off-by-one value range checking for tps65912_i2c_write

If bytes == (TPS6591X_MAX_REGISTER + 1), we have a buffer overflow when
doing memcpy(&msg[1], src, bytes).

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Add devices for WM831x clocking module
Mark Brown [Fri, 24 Jun 2011 11:17:07 +0000]
mfd: Add devices for WM831x clocking module

With the new generic clk API that should appear at some point we should be
able to support the clocking sensibly in Linux.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Remove comp{1,2}_threshold sysfs entries in tps65911_comparator_remove
Axel Lin [Thu, 23 Jun 2011 02:19:16 +0000]
mfd: Remove comp{1,2}_threshold sysfs entries in tps65911_comparator_remove

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Don't ask about the TPS65912 core driver in Kconfig
Mark Brown [Wed, 22 Jun 2011 13:53:58 +0000]
mfd: Don't ask about the TPS65912 core driver in Kconfig

The user has to select the I2C and SPI drivers individually and they select
the core driver for the device so there's no point in presenting the user
with an option for the core driver.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Fix off by one in WM831x IRQ code
Dimitris Papastamos [Tue, 21 Jun 2011 23:23:08 +0000]
mfd: Fix off by one in WM831x IRQ code

The GPIO IRQs aren't the first IRQs defined, we need to subtract the base
for the GPIOs as well to use them for array indexes.

Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Add tps65921 support from twl-core
Oleg Drokin [Fri, 1 Jul 2011 11:34:13 +0000]
mfd: Add tps65921 support from twl-core

Very similar to TPS65920
List of differences: http://www.ti.com/litv/pdf/swcu066b

Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Add WM831x clock control register definitions
Mark Brown [Tue, 21 Jun 2011 10:12:23 +0000]
mfd: Add WM831x clock control register definitions

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Ensure value written by wm831x_set_bits() is within the mask
Mark Brown [Mon, 20 Jun 2011 11:25:58 +0000]
mfd: Ensure value written by wm831x_set_bits() is within the mask

Purely for defensiveness.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Implement tps65910 IRQ cleanup
Mark Brown [Mon, 20 Jun 2011 10:47:55 +0000]
mfd: Implement tps65910 IRQ cleanup

The tps65910_irq_exit() cleanup function was generating a warning from
sparse due to the lack of a prototype. This wasn't causing GCC warnings
as the driver wasn't cleaning up its IRQs on exit at all so there was no
use of an unprototyped function.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Add tunnelcreek watchdog to lpc_sch devices
Alexander Stein [Thu, 16 Jun 2011 11:05:49 +0000]
mfd: Add tunnelcreek watchdog to lpc_sch devices

Tunnel Creek has an additional watchdog core.

Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Clean-up ab8500 register file
Linus Walleij [Thu, 9 Jun 2011 21:57:57 +0000]
mfd: Clean-up ab8500 register file

This adds a previously undefined test register and removed a
number of double-defined accessory detect registers (they are
already defined higher up in the file.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: Update ab8500 subdevice list
Linus Walleij [Thu, 9 Jun 2011 21:57:45 +0000]
mfd: Update ab8500 subdevice list

This synchronize the subdevice entries for the AB8500 MFD driver
with the latest development of subdrivers for things like battery
charging and temperature monitoring.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agomfd: ab8500-core MFD devices marked as initdata
Robert Rosengren [Thu, 9 Jun 2011 21:57:33 +0000]
mfd: ab8500-core MFD devices marked as initdata

Internal MFD device structs are marked as __devinitdata since the kernel
will allocate memory for the same when calling mfd_add_devices.

Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com>
Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com>
Reviewed-by: Johan Palsson <johan.palsson@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agotps65912: add regulator driver
Margarita Olaya [Thu, 9 Jun 2011 19:50:27 +0000]
tps65912: add regulator driver

The tps65912 consist of 4 DCDCs and 10 LDOs. The output voltages can be
configured by the SPI or I2C interface, they are meant to supply power
to the main processor and other components.

Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

7 years agotps65912: gpio: add gpio driver
Margarita Olaya [Thu, 9 Jun 2011 19:50:19 +0000]
tps65912: gpio: add gpio driver

TPS65912 has five GPIOs that can be configured for different
purposes.

Signed-off-by: Margarita Olaya Cabrera <magi@slimlogic.co.uk>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Liam Girdwood <lrg@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>