8 years agosfc: Always map MCDI shared memory as uncacheable
Ben Hutchings [Wed, 11 May 2011 16:41:18 +0000]
sfc: Always map MCDI shared memory as uncacheable

We enabled write-combining for memory-mapped registers in commit
65f0b417dee94f779ce9b77102b7d73c93723b39, but inhibited it for the
MCDI shared memory where this is not supported.  However,
write-combining mappings also allow read-reordering, which may also
be a problem.

I found that when an SFC9000-family controller is connected to an
Intel 3000 chipset, and write-combining is enabled, the controller
stops responding to PCIe read requests during driver initialisation
while the driver is polling for completion of an MCDI command.  This
results in an NMI and system hang.  Adding read memory barriers
between all reads to the shared memory area appears to reduce but not
eliminate the probability of this.

We have not yet established whether this is a bug in our BIU or in the
PCIe bridge.  For now, work around by mapping the shared memory area
separately.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

8 years agosysctl: net: call unregister_net_sysctl_table where needed
Lucian Adrian Grijincu [Sun, 1 May 2011 01:44:01 +0000]
sysctl: net: call unregister_net_sysctl_table where needed

ctl_table_headers registered with register_net_sysctl_table should
have been unregistered with the equivalent unregister_net_sysctl_table

Signed-off-by: Lucian Adrian Grijincu <lucian.grijincu@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoRevert: veth: remove unneeded ifname code from veth_newlink()
Jiri Pirko [Sat, 30 Apr 2011 01:28:17 +0000]
Revert: veth: remove unneeded ifname code from veth_newlink()

84c49d8c3e4abefb0a41a77b25aa37ebe8d6b743 ("veth: remove unneeded
ifname code from veth_newlink()") caused regression on veth
creation. This patch reverts the original one.

Reported-by: Michał Mirosław <mirqus@gmail.com>
Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosmsc95xx: fix reset check
Rabin Vincent [Sat, 30 Apr 2011 08:29:27 +0000]
smsc95xx: fix reset check

The reset loop check should check the MII_BMCR register value for
BMCR_RESET rather than for MII_BMCR (the register address, which also
happens to be zero).

Signed-off-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agotg3: Fix failure to enable WoL by default when possible
Rafael J. Wysocki [Thu, 28 Apr 2011 11:02:15 +0000]
tg3: Fix failure to enable WoL by default when possible

tg3 is supposed to enable WoL by default on adapters which support
that, but it fails to do so unless the adapter's
/sys/devices/.../power/wakeup file contains 'enabled' during the
initialization of the adapter.  Fix that by making tg3 use
device_set_wakeup_enable() to enable wakeup automatically whenever
WoL should be enabled by default.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetworking: inappropriate ioctl operation should return ENOTTY
Lifeng Sun [Wed, 27 Apr 2011 22:04:51 +0000]
networking: inappropriate ioctl operation should return ENOTTY

ioctl() calls against a socket with an inappropriate ioctl operation
are incorrectly returning EINVAL rather than ENOTTY:

  [ENOTTY]
      Inappropriate I/O control operation.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=33992

Signed-off-by: Lifeng Sun <lifongsun@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoamd8111e: trivial typo spelling: Negotitate -> Negotiate
Joe Perches [Mon, 2 May 2011 09:59:29 +0000]
amd8111e: trivial typo spelling: Negotitate -> Negotiate

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Mon, 2 May 2011 19:21:47 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

8 years agoipv4: don't spam dmesg with "Using LC-trie" messages
Alexey Dobriyan [Sun, 1 May 2011 02:04:11 +0000]
ipv4: don't spam dmesg with "Using LC-trie" messages

fib_trie_table() is called during netns creation and
Chromium uses clone(CLONE_NEWNET) to sandbox renderer process.

Don't print anything.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoaf_unix: Only allow recv on connected seqpacket sockets.
Eric W. Biederman [Sun, 24 Apr 2011 01:54:57 +0000]
af_unix: Only allow recv on connected seqpacket sockets.

This fixes the following oops discovered by Dan Aloni:
> Anyway, the following is the output of the Oops that I got on the
> Ubuntu kernel on which I first detected the problem
> (2.6.37-12-generic). The Oops that followed will be more useful, I
> guess.

>[ 5594.669852] BUG: unable to handle kernel NULL pointer dereference
> at           (null)
> [ 5594.681606] IP: [<ffffffff81550b7b>] unix_dgram_recvmsg+0x1fb/0x420
> [ 5594.687576] PGD 2a05d067 PUD 2b951067 PMD 0
> [ 5594.693720] Oops: 0002 [#1] SMP
> [ 5594.699888] last sysfs file:

The bug was that unix domain sockets use a pseduo packet for
connecting and accept uses that psudo packet to get the socket.
In the buggy seqpacket case we were allowing unconnected
sockets to call recvmsg and try to receive the pseudo packet.

That is always wrong and as of commit 7361c36c5 the pseudo
packet had become enough different from a normal packet
that the kernel started oopsing.

Do for seqpacket_recv what was done for seqpacket_send in 2.5
and only allow it on connected seqpacket sockets.

Cc: stable@kernel.org
Tested-by: Dan Aloni <dan@aloni.org>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomii: add support of pause frames in mii_get_an
artpol [Wed, 27 Apr 2011 17:49:14 +0000]
mii: add support of pause frames in mii_get_an

Add support of pause frames advertise in mii_get_an. This provides all drivers
that use mii_ethtool_gset to represent their own and Link partner flow control
abilities in ethtool.

Signed-off-by: Artem Polyakov <artpol84@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: ftmac100: fix scheduling while atomic during PHY link status change
Adam Jaremko [Thu, 28 Apr 2011 07:41:18 +0000]
net: ftmac100: fix scheduling while atomic during PHY link status change

Signed-off-by: Adam Jaremko <adam.jaremko@gmail.com>
Acked-by: Po-Yu Chuang <ratbert@faraday-tech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agousbnet: Transfer of maintainership
Oliver Neukum [Fri, 29 Apr 2011 12:15:53 +0000]
usbnet: Transfer of maintainership

Somebody has to do it, however unfortunate be the cause.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agousbnet: add support for some Huawei modems with cdc-ether ports
Dan Williams [Wed, 27 Apr 2011 09:54:28 +0000]
usbnet: add support for some Huawei modems with cdc-ether ports

Some newer Huawei devices (T-Mobile Rocket, others) have cdc-ether
compatible ports, so recognize and expose them.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2: cancel timer on device removal
Neil Horman [Tue, 26 Apr 2011 10:30:11 +0000]
bnx2: cancel timer on device removal

This oops was recently reported to me:

invalid opcode: 0000 [#1] SMP
last sysfs file:
/sys/devices/pci0000:00/0000:00:01.0/0000:01:0d.0/0000:02:05.0/device
CPU 1
Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg
microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4
shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase
scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core
dm_mod [last unloaded: bnx2]

Modules linked in: bnx2(+) sunrpc ipv6 dm_mirror dm_region_hash dm_log sg
microcode serio_raw amd64_edac_mod edac_core edac_mce_amd k8temp i2c_piix4
shpchp ext4 mbcache jbd2 sd_mod crc_t10dif mptsas mptscsih mptbase
scsi_transport_sas radeon ttm drm_kms_helper drm hwmon i2c_algo_bit i2c_core
dm_mod [last unloaded: bnx2]
Pid: 23900, comm: pidof Not tainted 2.6.32-130.el6.x86_64 #1 BladeCenter LS21
-[797251Z]-
RIP: 0010:[<ffffffffa058b270>]  [<ffffffffa058b270>] 0xffffffffa058b270
RSP: 0018:ffff880002083e48  EFLAGS: 00010246
RAX: ffff880002083e90 RBX: ffff88007ccd4000 RCX: 0000000000000000
RDX: 0000000000000100 RSI: dead000000200200 RDI: ffff8800007b8700
RBP: ffff880002083ed0 R08: ffff88000208db40 R09: 0000022d191d27c8
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8800007b9bc8
R13: ffff880002083e90 R14: ffff8800007b8700 R15: ffffffffa058b270
FS:  00007fbb3bcf7700(0000) GS:ffff880002080000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000001664a98 CR3: 0000000060395000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process pidof (pid: 23900, threadinfo ffff8800007e8000, task ffff8800091c0040)
Stack:
 ffffffff81079f77 ffffffff8109e010 ffff88007ccd5c20 ffff88007ccd5820
<0> ffff88007ccd5420 ffff8800007e9fd8 ffff8800007e9fd8 0000010000000000
<0> ffff88007ccd5020 ffff880002083e90 ffff880002083e90 ffffffff8102a00d
Call Trace:
 <IRQ>
 [<ffffffff81079f77>] ? run_timer_softirq+0x197/0x340
 [<ffffffff8109e010>] ? tick_sched_timer+0x0/0xc0
 [<ffffffff8102a00d>] ? lapic_next_event+0x1d/0x30
 [<ffffffff8106f737>] __do_softirq+0xb7/0x1e0
 [<ffffffff81092cc0>] ? hrtimer_interrupt+0x140/0x250
 [<ffffffff81185f90>] ? filldir+0x0/0xe0
 [<ffffffff8100c2cc>] call_softirq+0x1c/0x30
 [<ffffffff8100df05>] do_softirq+0x65/0xa0
 [<ffffffff8106f525>] irq_exit+0x85/0x90
 [<ffffffff814e3340>] smp_apic_timer_interrupt+0x70/0x9b
 [<ffffffff8100bc93>] apic_timer_interrupt+0x13/0x20
 <EOI>
 [<ffffffff81211ba5>] ? selinux_file_permission+0x45/0x150
 [<ffffffff81262a75>] ? _atomic_dec_and_lock+0x55/0x80
 [<ffffffff812050c6>] security_file_permission+0x16/0x20
 [<ffffffff811861c1>] vfs_readdir+0x71/0xe0
 [<ffffffff81186399>] sys_getdents+0x89/0xf0
 [<ffffffff8100b172>] system_call_fastpath+0x16/0x1b

It occured during some stress testing, in which the reporter was repeatedly
removing and modprobing the bnx2 module while doing various other random
operations on the bnx2 registered net device.  Noting that this error occured on
a serdes based device, we noted that there were a few ethtool operations (most
notably self_test and set_phys_id) that have execution paths that lead into
bnx2_setup_serdes_phy.  This function is notable because it executes a mod_timer
call, which starts the bp->timer running.  Currently bnx2 is setup to assume
that this timer only nees to be stopped when bnx2_close or bnx2_suspend is
called.  Since the above ethtool operations are not gated on the net device
having been opened however, that assumption is incorrect, and can lead to the
timer still running after the module has been removed, leading to the oops above
(as well as other simmilar oopses).

Fix the problem by ensuring that the timer is stopped when pci_device_unregister
is called.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Hushan Jia <hjia@redhat.com>
CC: Michael Chan <mchan@broadcom.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoiwl4965: fix "Received BA when not expected"
Stanislaw Gruszka [Fri, 29 Apr 2011 15:51:56 +0000]
iwl4965: fix "Received BA when not expected"

Need to use broadcast sta_id for management frames, otherwise we broke
BA session in the firmware and get messages like that:

"Received BA when not expected"

or (on older kernels):

"BA scd_flow 0 does not match txq_id 10"

This fix regression introduced in 2.6.35 during station management
code rewrite by:

commit 2a87c26bbe9587baeb9e56d3ce0b4971bd777643
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Fri Apr 30 11:30:45 2010 -0700

    iwlwifi: use iwl_find_station less

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlagn: fix "Received BA when not expected"
Stanislaw Gruszka [Fri, 29 Apr 2011 15:51:06 +0000]
iwlagn: fix "Received BA when not expected"

Need to use broadcast sta_id for management frames, otherwise we broke
BA session in the firmware and get messages like that:

"Received BA when not expected"

or (on older kernels):

"BA scd_flow 0 does not match txq_id 10"

This fix regression introduced in 2.6.35 during station management
code rewrite by:

commit 2a87c26bbe9587baeb9e56d3ce0b4971bd777643
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Fri Apr 30 11:30:45 2010 -0700

    iwlwifi: use iwl_find_station less

Patch partially resolve:
https://bugzilla.kernel.org/show_bug.cgi?id=16691
However, there are still 11n performance problems on 4965 and 5xxx
devices that need to be investigated.

Cc: stable@kernel.org # 2.6.35+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agodsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085
Peter Korsgaard [Tue, 26 Apr 2011 01:45:41 +0000]
dsa/mv88e6131: fix unknown multicast/broadcast forwarding on mv88e6085

The 88e6085 has a few differences from the other devices in the port
control registers, causing unknown multicast/broadcast packets to get
dropped when using the standard port setup.

At the same time update kconfig to clarify that the mv88e6085 is now
supported.

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agousbnet: Resubmit interrupt URB if device is open
Paul Stewart [Thu, 28 Apr 2011 05:43:37 +0000]
usbnet: Resubmit interrupt URB if device is open

Resubmit interrupt URB if device is open.  Use a flag set in
usbnet_open() to determine this state.  Also kill and free
interrupt URB in usbnet_disconnect().

[Rebased off git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git]

Signed-off-by: Paul Stewart <pstew@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoiwl4965: fix "TX Power requested while scanning"
Stanislaw Gruszka [Thu, 28 Apr 2011 09:36:54 +0000]
iwl4965: fix "TX Power requested while scanning"

Fix the following:

WARNING: at drivers/net/wireless/iwlegacy/iwl-4965.c:1128 \
iwl4965_send_tx_power+0x61/0x102 [iwl4965]() Hardware name: [...]
TX Power requested while scanning!

Pid: 5723, comm: kworker/u:28 Not tainted 2.6.39-0.rc4.4.fc14.x86_64 #1
Call Trace:
 [<ffffffff8104e27b>] warn_slowpath_common+0x85/0x9d
 [<ffffffffa02782e0>] ? iwl4965_show_temperature+0x49/0x49 [iwl4965]
 [<ffffffff8104e336>] warn_slowpath_fmt+0x46/0x48
 [<ffffffffa027712f>] iwl4965_send_tx_power+0x61/0x102 [iwl4965]
 [<ffffffff81477e05>] ? mutex_lock+0x36/0x50
 [<ffffffffa0278337>] iwl4965_bg_txpower_work+0x57/0x73 [iwl4965]
 [<ffffffff810647f3>] process_one_work+0x18d/0x286
 [<ffffffff81065a5e>] worker_thread+0xfd/0x181
 [<ffffffff81065961>] ? manage_workers.clone.16+0x172/0x172
 [<ffffffff81069036>] kthread+0x82/0x8a
 [<ffffffff81480524>] kernel_thread_helper+0x4/0x10
 [<ffffffff81068fb4>] ? kthread_worker_fn+0x14b/0x14b
 [<ffffffff81480520>] ? gs_change+0x13/0x13

Reported-and-tested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlegacy: led stay solid on when no traffic
Wey-Yi Guy [Mon, 25 Apr 2011 18:12:57 +0000]
iwlegacy: led stay solid on when no traffic

commit 5ed540aecc2aae92d5c97b9a9306a5bf88ad5574 change the led behavior
for iwlwifi driver; the side effect cause led blink all the time.

Modify the led blink table to fix this problem

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agob43: trivial: update module info about ucode16_mimo firmware
Rafał Miłecki [Tue, 19 Apr 2011 20:49:29 +0000]
b43: trivial: update module info about ucode16_mimo firmware

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoxfrm: Check for the new replay implementation if an esn state is inserted
Steffen Klassert [Mon, 25 Apr 2011 19:41:21 +0000]
xfrm: Check for the new replay implementation if an esn state is inserted

IPsec extended sequence numbers can be used only with the new
anti-replay window implementation. So check if the new implementation
is used if an esn state is inserted and return an error if it is not.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoesp6: Fix scatterlist initialization
Steffen Klassert [Mon, 25 Apr 2011 19:40:23 +0000]
esp6: Fix scatterlist initialization

When we use IPsec extended sequence numbers, we may overwrite
the last scatterlist of the associated data by the scatterlist
for the skb. This patch fixes this by placing the scatterlist
for the skb right behind the last scatterlist of the associated
data. esp4 does it already like that.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoxfrm: Fix replay window size calculation on initialization
Steffen Klassert [Mon, 25 Apr 2011 19:39:24 +0000]
xfrm: Fix replay window size calculation on initialization

On replay initialization, we compute the size of the replay
buffer to see if the replay window fits into the buffer.
This computation lacks a mutliplication by 8 because we need
the size in bit, not in byte. So we might return an error
even though the replay window would fit into the buffer.
This patch fixes this issue.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: provide cow_metrics() methods to blackhole dst_ops
Held Bernhard [Sun, 24 Apr 2011 22:07:32 +0000]
net: provide cow_metrics() methods to blackhole dst_ops

Since commit 62fa8a846d7d (net: Implement read-only protection and COW'ing
of metrics.) the kernel throws an oops.

[  101.620985] BUG: unable to handle kernel NULL pointer dereference at
           (null)
[  101.621050] IP: [<          (null)>]           (null)
[  101.621084] PGD 6e53c067 PUD 3dd6a067 PMD 0
[  101.621122] Oops: 0010 [#1] SMP
[  101.621153] last sysfs file: /sys/devices/virtual/ppp/ppp/uevent
[  101.621192] CPU 2
[  101.621206] Modules linked in: l2tp_ppp pppox ppp_generic slhc
l2tp_netlink l2tp_core deflate zlib_deflate twofish_x86_64
twofish_common des_generic cbc ecb sha1_generic hmac af_key
iptable_filter snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device loop
snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec
snd_pcm snd_timer snd i2c_i801 iTCO_wdt psmouse soundcore snd_page_alloc
evdev uhci_hcd ehci_hcd thermal
[  101.621552]
[  101.621567] Pid: 5129, comm: openl2tpd Not tainted 2.6.39-rc4-Quad #3
Gigabyte Technology Co., Ltd. G33-DS3R/G33-DS3R
[  101.621637] RIP: 0010:[<0000000000000000>]  [<          (null)>]   (null)
[  101.621684] RSP: 0018:ffff88003ddeba60  EFLAGS: 00010202
[  101.621716] RAX: ffff88003ddb5600 RBX: ffff88003ddb5600 RCX:
0000000000000020
[  101.621758] RDX: ffffffff81a69a00 RSI: ffffffff81b7ee61 RDI:
ffff88003ddb5600
[  101.621800] RBP: ffff8800537cd900 R08: 0000000000000000 R09:
ffff88003ddb5600
[  101.621840] R10: 0000000000000005 R11: 0000000000014b38 R12:
ffff88003ddb5600
[  101.621881] R13: ffffffff81b7e480 R14: ffffffff81b7e8b8 R15:
ffff88003ddebad8
[  101.621924] FS:  00007f06e4182700(0000) GS:ffff88007fd00000(0000)
knlGS:0000000000000000
[  101.621971] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  101.622005] CR2: 0000000000000000 CR3: 0000000045274000 CR4:
00000000000006e0
[  101.622046] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[  101.622087] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[  101.622129] Process openl2tpd (pid: 5129, threadinfo
ffff88003ddea000, task ffff88003de9a280)
[  101.622177] Stack:
[  101.622191]  ffffffff81447efa ffff88007d3ded80 ffff88003de9a280
ffff88007d3ded80
[  101.622245]  0000000000000001 ffff88003ddebbb8 ffffffff8148d5a7
0000000000000212
[  101.622299]  ffff88003dcea000 ffff88003dcea188 ffffffff00000001
ffffffff81b7e480
[  101.622353] Call Trace:
[  101.622374]  [<ffffffff81447efa>] ? ipv4_blackhole_route+0x1ba/0x210
[  101.622415]  [<ffffffff8148d5a7>] ? xfrm_lookup+0x417/0x510
[  101.622450]  [<ffffffff8127672a>] ? extract_buf+0x9a/0x140
[  101.622485]  [<ffffffff8144c6a0>] ? __ip_flush_pending_frames+0x70/0x70
[  101.622526]  [<ffffffff8146fbbf>] ? udp_sendmsg+0x62f/0x810
[  101.622562]  [<ffffffff813f98a6>] ? sock_sendmsg+0x116/0x130
[  101.622599]  [<ffffffff8109df58>] ? find_get_page+0x18/0x90
[  101.622633]  [<ffffffff8109fd6a>] ? filemap_fault+0x12a/0x4b0
[  101.622668]  [<ffffffff813fb5c4>] ? move_addr_to_kernel+0x64/0x90
[  101.622706]  [<ffffffff81405d5a>] ? verify_iovec+0x7a/0xf0
[  101.622739]  [<ffffffff813fc772>] ? sys_sendmsg+0x292/0x420
[  101.622774]  [<ffffffff810b994a>] ? handle_pte_fault+0x8a/0x7c0
[  101.622810]  [<ffffffff810b76fe>] ? __pte_alloc+0xae/0x130
[  101.622844]  [<ffffffff810ba2f8>] ? handle_mm_fault+0x138/0x380
[  101.622880]  [<ffffffff81024af9>] ? do_page_fault+0x189/0x410
[  101.622915]  [<ffffffff813fbe03>] ? sys_getsockname+0xf3/0x110
[  101.622952]  [<ffffffff81450c4d>] ? ip_setsockopt+0x4d/0xa0
[  101.622986]  [<ffffffff813f9932>] ? sockfd_lookup_light+0x22/0x90
[  101.623024]  [<ffffffff814b61fb>] ? system_call_fastpath+0x16/0x1b
[  101.623060] Code:  Bad RIP value.
[  101.623090] RIP  [<          (null)>]           (null)
[  101.623125]  RSP <ffff88003ddeba60>
[  101.623146] CR2: 0000000000000000
[  101.650871] ---[ end trace ca3856a7d8e8dad4 ]---
[  101.651011] __sk_free: optmem leakage (160 bytes) detected.

The oops happens in dst_metrics_write_ptr()
include/net/dst.h:124: return dst->ops->cow_metrics(dst, p);

dst->ops->cow_metrics is NULL and causes the oops.

Provide cow_metrics() methods, like we did in commit 214f45c91bb
(net: provide default_advmss() methods to blackhole dst_ops)

Signed-off-by: Held Bernhard <berny156@gmx.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocdc_ncm: fix short packet issue on some devices
Hans Petter Selasky [Mon, 25 Apr 2011 05:35:19 +0000]
cdc_ncm: fix short packet issue on some devices

The default maximum transmit length for NCM USB frames should be so
that a short packet happens at the end if the device supports a length
greater than the defined maximum. This is achieved by adding 4 bytes
to the maximum length so that the existing logic can fit a short
packet there.

Signed-off-by: Hans Petter Selasky <hselasky@c2i.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'davem.r8169' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu...
David S. Miller [Sun, 24 Apr 2011 18:51:04 +0000]
Merge branch 'davem.r8169' of git://git./linux/kernel/git/romieu/netdev-2.6

8 years agor8169: don't request firmware when there's no userspace.
François Romieu [Sun, 24 Apr 2011 15:38:48 +0000]
r8169: don't request firmware when there's no userspace.

The firmware is cached during the first successfull call to open() and
released once the network device is unregistered. The driver uses the
cached firmware between open() and unregister_netdev().

So far the firmware is optional : a failure to load the firmware does
not prevent open() to success. It is thus necessary to 1) unregister
all 816x / 810[23] devices and 2) force a driver probe to issue a new
firmware load.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Fixed-by: Ciprian Docan <docan@eden.rutgers.edu>
Cc: Realtek linux nic maintainers <nic_swsd@realtek.com>

8 years agobnx2x: fix UDP csum offload
Vladislav Zolotarov [Sat, 23 Apr 2011 07:44:46 +0000]
bnx2x: fix UDP csum offload

Fixed packets parameters for FW in UDP checksum offload flow.

Do not dereference TCP headers on non TCP frames.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetconsole: fix deadlock when removing net driver that netconsole is using (v2)
Neil Horman [Fri, 22 Apr 2011 08:10:59 +0000]
netconsole: fix deadlock when removing net driver that netconsole is using (v2)

A deadlock was reported to me recently that occured when netconsole was being
used in a virtual guest.  If the virtio_net driver was removed while netconsole
was setup to use an interface that was driven by that driver, the guest
deadlocked.  No backtrace was provided because netconsole was the only console
configured, but it became clear pretty quickly what the problem was.  In
netconsole_netdev_event, if we get an unregister event, we call
__netpoll_cleanup with the target_list_lock held and irqs disabled.
__netpoll_cleanup can, if pending netpoll packets are waiting call
cancel_delayed_work_sync, which is a sleeping path.  the might_sleep call in
that path gets triggered, causing a console warning to be issued.  The
netconsole write handler of course tries to take the target_list_lock again,
which we already hold, causing deadlock.

The fix is pretty striaghtforward.  Simply drop the target_list_lock and
re-enable irqs prior to calling __netpoll_cleanup, the re-acquire the lock, and
restart the loop.  Confirmed by myself to fix the problem reported.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Fri, 22 Apr 2011 20:21:38 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

8 years agoRevert "bridge: Forward reserved group addresses if !STP"
David S. Miller [Fri, 22 Apr 2011 04:17:25 +0000]
Revert "bridge: Forward reserved group addresses if !STP"

This reverts commit 1e253c3b8a1aeed51eef6fc366812f219b97de65.

It breaks 802.3ad bonding inside of a bridge.

The commit was meant to support transport bridging, and specifically
virtual machines bridged to an ethernet interface connected to a
switch port wiht 802.1x enabled.

But this isn't the way to do it, it breaks too many other things.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoatl1c: Fix work event interrupt/task races
Tim Gardner [Wed, 20 Apr 2011 09:00:49 +0000]
atl1c: Fix work event interrupt/task races

The mechanism used to initiate work events from the interrupt
handler has a classic read/modify/write race between the interrupt
handler that sets the condition, and the worker task that reads and
clears the condition. Close these races by using atomic
bit fields.

Cc: stable@kernel.org
Cc: Jie Yang <jie.yang@atheros.com>
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobe2net: increment work_counter in be_worker
Ivan Vecera [Thu, 21 Apr 2011 00:20:04 +0000]
be2net: increment work_counter in be_worker

The commit 609ff3b ("be2net: add code to display temperature of ASIC")
adds support to display temperature of ASIC but there is missing
increment of work_counter in be_worker. Because of this 1) the
function be_cmd_get_die_temperature is called every 1 second instead
of every 32 seconds 2) be_cmd_get_die_temperature is called, although
it is not supported.  This patch fixes this bug.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: Remove hoplimit initialization to -1
Thomas Egerer [Wed, 20 Apr 2011 22:56:02 +0000]
ipv6: Remove hoplimit initialization to -1

The changes introduced with git-commit a02e4b7d ("ipv6: Demark default
hoplimit as zero.") missed to remove the hoplimit initialization. As a
result, ipv6_get_mtu interprets the return value of dst_metric_raw
(-1) as 255 and answers ping6 with this hoplimit.  This patche removes
the line such that ping6 is answered with the hoplimit value
configured via sysctl.

Signed-off-by: Thomas Egerer <thomas.egerer@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agopowerpc: Fix multicast problem in fs_enet driver
Andrea Galbusera [Thu, 21 Apr 2011 02:21:21 +0000]
powerpc: Fix multicast problem in fs_enet driver

mac-fec.c was setting individual UDP address registers instead of multicast
group address registers when joining a multicast group.
This prevented from correctly receiving UDP multicast packets.
According to datasheet, replaced hash_table_high and hash_table_low
with grp_hash_table_high and grp_hash_table_low respectively.
Also renamed hash_table_* with grp_hash_table_* in struct fec declaration
for 8xx: these registers are used only for multicast there.

Tested on a MPC5121 based board.
Build tested also against mpc866_ads_defconfig.

Signed-off-by: Andrea Galbusera <gizero@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoipv6: udp: fix the wrong headroom check
Shan Wei [Tue, 19 Apr 2011 22:52:49 +0000]
ipv6: udp: fix the wrong headroom check

At this point, skb->data points to skb_transport_header.
So, headroom check is wrong.

For some case:bridge(UFO is on) + eth device(UFO is off),
there is no enough headroom for IPv6 frag head.
But headroom check is always false.

This will bring about data be moved to there prior to skb->head,
when adding IPv6 frag header to skb.

Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoiwl4965: fix skb usage after free
Stanislaw Gruszka [Wed, 20 Apr 2011 14:01:46 +0000]
iwl4965: fix skb usage after free

Since

commit a120e912eb51e347f36c71b60a1d13af74d30e83
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Fri Feb 19 15:47:33 2010 -0800

    iwlwifi: sanity check before counting number of tfds can be free

we use skb->data after calling ieee80211_tx_status_irqsafe(), which
could free skb instantly.

On current kernels I do not observe practical problems related with
bug, but on 2.6.35.y it cause random system hangs when stressing
wireless link, making bisection of other problems impossible.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoiwlwifi: fix skb usage after free
Stanislaw Gruszka [Wed, 20 Apr 2011 13:57:14 +0000]
iwlwifi: fix skb usage after free

Since

commit a120e912eb51e347f36c71b60a1d13af74d30e83
Author: Stanislaw Gruszka <sgruszka@redhat.com>
Date:   Fri Feb 19 15:47:33 2010 -0800

    iwlwifi: sanity check before counting number of tfds can be free

we use skb->data after calling ieee80211_tx_status_irqsafe(), which
could free skb instantly.

On current kernels I do not observe practical problems related with
bug, but on 2.6.35.y it cause random system hangs when stressing
wireless link.

Cc: stable@kernel.org # 2.6.32+
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agomac80211: fix SMPS debugfs locking
Johannes Berg [Tue, 19 Apr 2011 18:44:04 +0000]
mac80211: fix SMPS debugfs locking

The locking with SMPS requests means that the
debugs file should lock the mgd mutex, not the
iflist mutex. Calls to __ieee80211_request_smps()
need to hold that mutex, so add an assertion.

This has always been wrong, but for some reason
never been noticed, probably because the locking
error only happens while unassociated.

Cc: stable@kernel.org [2.6.34+]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/padovan/blueto...
John W. Linville [Wed, 20 Apr 2011 19:56:44 +0000]
Merge branch 'master' of git://git./linux/kernel/git/padovan/bluetooth-2.6

8 years agocan: add missing socket check in can/raw release
Oliver Hartkopp [Wed, 20 Apr 2011 01:57:15 +0000]
can: add missing socket check in can/raw release

v2: added space after 'if' according code style.

We can get here with a NULL socket argument passed from userspace,
so we need to handle it accordingly.

Thanks to Dave Jones pointing at this issue in net/can/bcm.c

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding: 802.3ad - fix agg_device_up
Jiri Bohac [Tue, 19 Apr 2011 02:09:55 +0000]
bonding: 802.3ad - fix agg_device_up

The slave member of struct aggregator does not necessarily point
to a slave which is part of the aggregator. It points to the
slave structure containing the aggregator structure, while
completely different slaves (or no slaves at all) may be part of
the aggregator.

The agg_device_up() function wrongly uses agg->slave to find the state
of the aggregator.  Use agg->lag_ports->slave instead. The bug has
been introduced by commit 4cd6fe1c6483cde93e2ec91f58b7af9c9eea51ad
("bonding: fix link down handling in 802.3ad mode").

Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoehea: Fix a DLPAR bug on ehea_rereg_mrs().
Breno Leitao [Tue, 19 Apr 2011 09:39:22 +0000]
ehea: Fix a DLPAR bug on ehea_rereg_mrs().

We are currently continuing if ehea_restart_qps() fails, when we
do a memory DLPAR (remove or add more memory to the system).

This patch just let the NAPI disabled if the ehea_restart_qps()
fails.

Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocan: Add missing socket check in can/bcm release.
Dave Jones [Wed, 20 Apr 2011 03:36:59 +0000]
can: Add missing socket check in can/bcm release.

We can get here with a NULL socket argument passed from userspace,
so we need to handle it accordingly.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoath9k: fix the return value of ath_stoprecv
Felix Fietkau [Thu, 14 Apr 2011 22:41:43 +0000]
ath9k: fix the return value of ath_stoprecv

The patch 'ath9k_hw: fix stopping rx DMA during resets' added code to detect
a condition where rx DMA was stopped, but the MAC failed to enter the idle
state. This condition requires a hardware reset, however the return value
of ath_stoprecv was 'true' in that case, which allowed it to skip the reset
when issuing a fast channel change.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Reported-by: Paul Stewart <pstew@google.com>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
David S. Miller [Tue, 19 Apr 2011 18:28:35 +0000]
Merge branch 'master' of git://git./linux/kernel/git/kaber/nf-2.6

8 years agonetfilter: ipset: Fix the order of listing of sets
Jozsef Kadlecsik [Tue, 19 Apr 2011 13:59:15 +0000]
netfilter: ipset: Fix the order of listing of sets

A restoreable saving of sets requires that list:set type of sets
come last and the code part which should have taken into account
the ordering was broken. The patch fixes the listing order.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>

8 years agoBluetooth: Only keeping SAR bits when retransmitting one frame.
Ruiyi Zhang [Mon, 18 Apr 2011 03:04:30 +0000]
Bluetooth: Only keeping SAR bits when retransmitting one frame.

When retrasmitting one frame, only SAR bits in control field should
be kept.

Signed-off-by: Ruiyi Zhang <Ruiyi.zhang@atheros.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

8 years agoBluetooth: fix shutdown on SCO sockets
Luiz Augusto von Dentz [Fri, 8 Apr 2011 14:10:41 +0000]
Bluetooth: fix shutdown on SCO sockets

shutdown should wait for SCO link to be properly disconnected before
detroying the socket, otherwise an application using the socket may
assume link is properly disconnected before it really happens which
can be a problem when e.g synchronizing profile switch.

Signed-off-by: Luiz Augusto von Dentz <luiz.dentz-von@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

8 years agoBluetooth: Fix keeping the command timer running
Vinicius Costa Gomes [Mon, 11 Apr 2011 21:46:55 +0000]
Bluetooth: Fix keeping the command timer running

In the teardown path the reset command is sent to the controller,
this event causes the command timer to be reactivated.

So the timer is removed in two situations, when the adapter isn't
marked as UP and when we know that some command has been sent.

Reported-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@openbossa.org>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

8 years agoBluetooth: Fix refcount balance for hci connection
Ville Tervo [Thu, 7 Apr 2011 11:59:50 +0000]
Bluetooth: Fix refcount balance for hci connection

hci_io_capa_reply_evt() holds reference for hciconnection. It's useless since
hci_io_capa_request_evt()/hci_simple_pair_complete_evt() already protects the
connection. In addition it leaves connection open after failed SSP pairing.

Signed-off-by: Ville Tervo <ville.tervo@nokia.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

8 years agoiwlwifi: fix frame injection for HT channels
Daniel Halperin [Wed, 6 Apr 2011 19:47:25 +0000]
iwlwifi: fix frame injection for HT channels

For some reason, sending QoS configuration causes transmission to stop
after a single frame on HT channels when not associated. Removing the
extra QoS configuration has no effect on station mode, and fixes
injection mode.

Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu>
Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>

8 years agoip6_pol_route panic: Do not allow VLAN on loopback
Krishna Kumar [Thu, 14 Apr 2011 06:07:04 +0000]
ip6_pol_route panic: Do not allow VLAN on loopback

Several tests in the ipv6 routing code check IFF_LOOPBACK, and
allowing stacking such as VLAN'ing on top of loopback results in a
netdevice which reports IFF_LOOPBACK but really isn't the loopback
device.

Instead of spamming the ipv6 routing code with even more special tests,
simply disallow VLAN over loopback.

The result of this patch is:

# modprobe 8021q
# vconfig add lo 43
ERROR: trying to add VLAN #43 to IF -:lo:-  error: Operation not supported

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobnx2x: Fix port identification problem
Yaniv Rosner [Mon, 18 Apr 2011 00:50:01 +0000]
bnx2x: Fix port identification problem

This patch fixes port identification on optic devices when there's no link on the port.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agor8169: add Realtek as maintainer.
Francois Romieu [Mon, 18 Apr 2011 00:46:40 +0000]
r8169: add Realtek as maintainer.

Per Hayes's request.

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoip: ip_options_compile() resilient to NULL skb route
Eric Dumazet [Thu, 14 Apr 2011 05:55:37 +0000]
ip: ip_options_compile() resilient to NULL skb route

Scot Doyle demonstrated ip_options_compile() could be called with an skb
without an attached route, using a setup involving a bridge, netfilter,
and forged IP packets.

Let's make ip_options_compile() and ip_options_rcv_srr() a bit more
robust, instead of changing bridge/netfilter code.

With help from Hiroaki SHIMODA.

Reported-by: Scot Doyle <lkml@scotdoyle.com>
Tested-by: Scot Doyle <lkml@scotdoyle.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Acked-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobna: fix memory leak during RX path cleanup
Rasesh Mody [Thu, 14 Apr 2011 08:05:19 +0000]
bna: fix memory leak during RX path cleanup

The memory leak was caused by unintentional assignment of the Rx path
destroy callback function pointer to NULL just after correct
initialization.

Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobna: fix for clean fw re-initialization
Rasesh Mody [Thu, 14 Apr 2011 08:05:18 +0000]
bna: fix for clean fw re-initialization

During a kernel crash, bna control path state machine and firmware do not
get a notification and hence are not cleanly shutdown. The registers
holding driver/IOC state information are not reset back to valid
disabled/parking values. This causes subsequent driver initialization
to hang during kdump kernel boot. This patch, during the initialization
of first PCI function, resets corresponding register when unclean shutown
is detect by reading chip registers. This will make sure that ioc/fw
gets clean re-initialization.

Signed-off-by: Debashis Dutt <ddutt@brocade.com>
Signed-off-by: Rasesh Mody <rmody@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Thu, 14 Apr 2011 20:16:51 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

8 years agousbnet: Fix up 'FLAG_POINTTOPOINT' and 'FLAG_MULTI_PACKET' overlaps.
huajun li [Wed, 13 Apr 2011 15:43:32 +0000]
usbnet: Fix up 'FLAG_POINTTOPOINT' and 'FLAG_MULTI_PACKET' overlaps.

USB tethering does not work anymore since 2.6.39-rc2, but it's okay in
-rc1. The root cause is the new added mask code 'FLAG_POINTTOPOINT'
overlaps 'FLAG_MULTI_PACKET'  in  include/linux/usb/usbnet.h, this
causes logic issue in  rx_process(). This patch cleans up the overlap.

Reported-and-Tested-by: Gottfried Haider <gottfried.haider@gmail.com>
Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoiwlegacy: fix tx_power initialization
Stanislaw Gruszka [Wed, 13 Apr 2011 08:56:51 +0000]
iwlegacy: fix tx_power initialization

priv->tx_power_next is not initialized to max supported power,
but instead default value is used, what cause errors like

[   58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14.
[   58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22).

if maximum tx power read from the eeprom is smaller than default.
In consequence card is unable to initialize properly. Fix the problem
and cleanup tx power initialization.

Reported-and-tested-by: Robin Dong <hao.bigrat@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoRevert "tcp: disallow bind() to reuse addr/port"
David S. Miller [Wed, 13 Apr 2011 19:01:14 +0000]
Revert "tcp: disallow bind() to reuse addr/port"

This reverts commit c191a836a908d1dd6b40c503741f91b914de3348.

It causes known regressions for programs that expect to be able to use
SO_REUSEADDR to shutdown a socket, then successfully rebind another
socket to the same ID.

Programs such as haproxy and amavisd expect this to work.

This should fix kernel bugzilla 32832.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoqlcnic: limit skb frags for non tso packet
Amit Kumar Salecha [Tue, 12 Apr 2011 17:05:55 +0000]
qlcnic: limit skb frags for non tso packet

Machines are getting deadlock in four node cluster environment.
All nodes are accessing (find /gfs2 -depth -print|cpio -ocv > /dev/null)
200 GB storage on a GFS2 filesystem.
This result in memory fragmentation and driver receives 18 frags for
1448 byte packets.
For non tso packet, fw drops the tx request, if it has >14 frags.

Fixing it by pulling extra frags.

Cc: stable@kernel.org
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: can: mscan: fix build breakage in mpc5xxx_can
Anatolij Gustschin [Tue, 12 Apr 2011 23:49:28 +0000]
net: can: mscan: fix build breakage in mpc5xxx_can

Commit 74888760d40b3ac9054f9c5fa07b566c0676ba2d
"dt/net: Eliminate users of of_platform_{,un}register_driver"
broke building mscan driver. Fix it.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetfilter: ipset: set match and SET target fixes
Jozsef Kadlecsik [Wed, 13 Apr 2011 11:45:57 +0000]
netfilter: ipset: set match and SET target fixes

The SET target with --del-set did not work due to using wrongly
the internal dimension of --add-set instead of --del-set.
Also, the checkentries did not release the set references when
returned an error. Bugs reported by Lennert Buytenhek.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>

8 years agonetfilter: ipset: bitmap:ip,mac type requires "src" for MAC
Jozsef Kadlecsik [Wed, 13 Apr 2011 11:43:23 +0000]
netfilter: ipset: bitmap:ip,mac type requires "src" for MAC

Enforce that the second "src/dst" parameter of the set match and SET target
must be "src", because we have access to the source MAC only in the packet.
The previous behaviour, that the type required the second parameter
but actually ignored the value was counter-intuitive and confusing.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>

8 years agoMerge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
Patrick McHardy [Wed, 13 Apr 2011 11:32:28 +0000]
Merge branch 'master' of ssh:///linux/kernel/git/kaber/nf-2.6

8 years agosctp: fix oops while removed transport still using as retran path
Wei Yongjun [Tue, 12 Apr 2011 15:22:22 +0000]
sctp: fix oops while removed transport still using as retran path

Since we can not update retran path to unconfirmed transports,
when we remove a peer, the retran path may not be update if the
other transports are all unconfirmed, and we will still using
the removed transport as the retran path. This may cause panic
if retrasnmit happen.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosctp: fix oops when updating retransmit path with DEBUG on
Vlad Yasevich [Tue, 12 Apr 2011 15:20:48 +0000]
sctp: fix oops when updating retransmit path with DEBUG on

commit fbdf501c9374966a56829ecca3a7f25d2b49a305
  sctp: Do no select unconfirmed transports for retransmissions

Introduced the initial falt.

commit d598b166ced20d9b9281ea3527c0e18405ddb803
  sctp: Make sure we always return valid retransmit path

Solved the problem, but forgot to change the DEBUG statement.
Thus it was still possible to dereference a NULL pointer.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Disable NETIF_F_TSO_ECN when TSO is disabled
Ben Hutchings [Tue, 12 Apr 2011 14:47:15 +0000]
net: Disable NETIF_F_TSO_ECN when TSO is disabled

NETIF_F_TSO_ECN has no effect when TSO is disabled; this just means
that feature state will be accurately reported to user-space.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Disable all TSO features when SG is disabled
Ben Hutchings [Tue, 12 Apr 2011 14:38:37 +0000]
net: Disable all TSO features when SG is disabled

The feature flags NETIF_F_TSO and NETIF_F_TSO6 independently enable
TSO for IPv4 and IPv6 respectively.  However, the test in
netdev_fix_features() and its predecessor functions was never updated
to check for NETIF_F_TSO6, possibly because it was originally proposed
that TSO for IPv6 would be dependent on both feature flags.

Now that these feature flags can be changed independently from
user-space and we depend on netdev_fix_features() to fix invalid
feature combinations, it's important to disable them both if
scatter-gather is disabled.  Also disable NETIF_F_TSO_ECN so
user-space sees all TSO features as disabled.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'sfc-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-2.6
David S. Miller [Wed, 13 Apr 2011 00:10:52 +0000]
Merge branch 'sfc-2.6.39' of git://git./linux/kernel/git/bwh/sfc-2.6

8 years agosfc: Use rmb() to ensure reads occur in order
Neil Turton [Mon, 11 Apr 2011 10:42:43 +0000]
sfc: Use rmb() to ensure reads occur in order

Enabling write-combining may also enable read reordering.  The BIU is
only guaranteed to read from a 128-bit CSR or 64-bit SRAM word when
the host reads from its lowest address; otherwise the BIU may use the
latched value.  Therefore we need to reinstate the read memory
barriers after the first read operation for each CSR or SRAM word.

Signed-off-by; Ben Hutchings <bhutchings@solarflare.com>

8 years agoieee802154: Remove hacked CFLAGS in net/ieee802154/Makefile
David S. Miller [Tue, 12 Apr 2011 22:33:23 +0000]
ieee802154: Remove hacked CFLAGS in net/ieee802154/Makefile

It adds -Wall (which the kernel carefully controls already) and of all
things -DDEBUG (which should be set by other means if desired, please
we have dynamic-debug these days).

Kill this noise.

Reported-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoirda: fix locking unbalance in irda_sendmsg
Dave Jones [Tue, 12 Apr 2011 22:29:54 +0000]
irda: fix locking unbalance in irda_sendmsg

5b40964eadea40509d353318d2c82e8b7bf5e8a5 ("irda: Remove BKL instances
from af_irda.c") introduced a path where we have a locking unbalance.
If we pass invalid flags, we unlock a socket we never locked,
resulting in this...

=====================================
[ BUG: bad unlock balance detected! ]
-------------------------------------
trinity/20101 is trying to release lock (sk_lock-AF_IRDA) at:
[<ffffffffa057f001>] irda_sendmsg+0x207/0x21d [irda]
but there are no more locks to release!

other info that might help us debug this:
no locks held by trinity/20101.

stack backtrace:
Pid: 20101, comm: trinity Not tainted 2.6.39-rc3+ #3
Call Trace:
 [<ffffffffa057f001>] ? irda_sendmsg+0x207/0x21d [irda]
 [<ffffffff81085041>] print_unlock_inbalance_bug+0xc7/0xd2
 [<ffffffffa057f001>] ? irda_sendmsg+0x207/0x21d [irda]
 [<ffffffff81086aca>] lock_release+0xcf/0x18e
 [<ffffffff813ed190>] release_sock+0x2d/0x155
 [<ffffffffa057f001>] irda_sendmsg+0x207/0x21d [irda]
 [<ffffffff813e9f8c>] __sock_sendmsg+0x69/0x75
 [<ffffffff813ea105>] sock_sendmsg+0xa1/0xb6
 [<ffffffff81100ca3>] ? might_fault+0x5c/0xac
 [<ffffffff81086b7c>] ? lock_release+0x181/0x18e
 [<ffffffff81100cec>] ? might_fault+0xa5/0xac
 [<ffffffff81100ca3>] ? might_fault+0x5c/0xac
 [<ffffffff81133b94>] ? fcheck_files+0xb9/0xf0
 [<ffffffff813f387a>] ? copy_from_user+0x2f/0x31
 [<ffffffff813f3b70>] ? verify_iovec+0x52/0xa6
 [<ffffffff813eb4e3>] sys_sendmsg+0x23a/0x2b8
 [<ffffffff81086b7c>] ? lock_release+0x181/0x18e
 [<ffffffff810773c6>] ? up_read+0x28/0x2c
 [<ffffffff814bec3d>] ? do_page_fault+0x360/0x3b4
 [<ffffffff81087043>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff810458aa>] ? finish_task_switch+0xb2/0xe3
 [<ffffffff8104583e>] ? finish_task_switch+0x46/0xe3
 [<ffffffff8108364a>] ? trace_hardirqs_off_caller+0x33/0x90
 [<ffffffff814bbaf9>] ? retint_swapgs+0x13/0x1b
 [<ffffffff81087043>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff810a9dd3>] ? audit_syscall_entry+0x11c/0x148
 [<ffffffff8125609e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff814c22c2>] system_call_fastpath+0x16/0x1b

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/natsami: store MAC into perm_addr
Otavio Salvador [Tue, 12 Apr 2011 05:30:41 +0000]
net/natsami: store MAC into perm_addr

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet/sis900: store MAC into perm_addr for SiS 900, 630E, 635 and 96x variants
Otavio Salvador [Tue, 12 Apr 2011 05:30:40 +0000]
net/sis900: store MAC into perm_addr for SiS 900, 630E, 635 and 96x variants

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoconnector: fix skb double free in cn_rx_skb()
Patrick McHardy [Tue, 12 Apr 2011 05:39:51 +0000]
connector: fix skb double free in cn_rx_skb()

When a skb is delivered to a registered callback, cn_call_callback()
incorrectly returns -ENODEV after freeing the skb, causing cn_rx_skb()
to free the skb a second time.

Reported-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Tested-by: Eric B Munson <emunson@mgebm.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: Do not wrap sysctl igmp_max_memberships in IP_MULTICAST
Joakim Tjernlund [Tue, 12 Apr 2011 20:59:33 +0000]
net: Do not wrap sysctl igmp_max_memberships in IP_MULTICAST

controlling igmp_max_membership is useful even when IP_MULTICAST
is off.
Quagga(an OSPF deamon) uses multicast addresses for all interfaces
using a single socket and hits igmp_max_membership limit when
there are 20 interfaces or more.
Always export sysctl igmp_max_memberships in proc, just like
igmp_max_msf

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoinetpeer: reduce stack usage
Eric Dumazet [Mon, 11 Apr 2011 22:39:40 +0000]
inetpeer: reduce stack usage

On 64bit arches, we use 752 bytes of stack when cleanup_once() is called
from inet_getpeer().

Lets share the avl stack to save ~376 bytes.

Before patch :

# objdump -d net/ipv4/inetpeer.o | scripts/checkstack.pl

0x000006c3 unlink_from_pool [inetpeer.o]: 376
0x00000721 unlink_from_pool [inetpeer.o]: 376
0x00000cb1 inet_getpeer [inetpeer.o]: 376
0x00000e6d inet_getpeer [inetpeer.o]: 376
0x0004 inet_initpeers [inetpeer.o]: 112
# size net/ipv4/inetpeer.o
   text    data     bss     dec     hex filename
   5320     432      21    5773    168d net/ipv4/inetpeer.o

After patch :

objdump -d net/ipv4/inetpeer.o | scripts/checkstack.pl
0x00000c11 inet_getpeer [inetpeer.o]: 376
0x00000dcd inet_getpeer [inetpeer.o]: 376
0x00000ab9 peer_check_expire [inetpeer.o]: 328
0x00000b7f peer_check_expire [inetpeer.o]: 328
0x0004 inet_initpeers [inetpeer.o]: 112
# size net/ipv4/inetpeer.o
   text    data     bss     dec     hex filename
   5163     432      21    5616    15f0 net/ipv4/inetpeer.o

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Scot Doyle <lkml@scotdoyle.com>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Reviewed-by: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoath9k_htc: Fix ethtool reporting
Sujith Manoharan [Mon, 11 Apr 2011 17:26:55 +0000]
ath9k_htc: Fix ethtool reporting

Pass the correct module name and device interface so that
ethtool can display the proper values.

The firmware version will be fixed later on when the FW
can actually report a version. :)

Reported-by: Richard Farina <sidhayn@gmail.com>
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Tested-by: Richard Farina <sidhayn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agoath9k_hw: fix stopping rx DMA during resets
Felix Fietkau [Fri, 8 Apr 2011 18:13:18 +0000]
ath9k_hw: fix stopping rx DMA during resets

During PHY errors, the MAC can sometimes fail to enter an idle state on older
hardware (before AR9380) after an rx stop has been requested.

This typically shows up in the kernel log with messages like these:

ath: Could not stop RX, we could be confusing the DMA engine when we start RX up
------------[ cut here ]------------
WARNING: at drivers/net/wireless/ath/ath9k/recv.c:504 ath_stoprecv+0xcc/0xf0 [ath9k]()
Call Trace:
[<8023f0e8>] dump_stack+0x8/0x34
[<80075050>] warn_slowpath_common+0x78/0xa4
[<80075094>] warn_slowpath_null+0x18/0x24
[<80d66d60>] ath_stoprecv+0xcc/0xf0 [ath9k]
[<80d642cc>] ath_set_channel+0xbc/0x270 [ath9k]
[<80d65254>] ath_radio_disable+0x4a4/0x7fc [ath9k]

When this happens, the state that the MAC enters is easy to identify and
does not result in bogus DMA traffic, however to ensure a working state
after a channel change, the hardware should still be reset.

This patch adds detection for this specific MAC state, after which the above
warnings completely disappear in my tests.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Cc: Kyungwan Nam <Kyungwan.Nam@Atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

8 years agobridge: reset IPCB in br_parse_ip_options
Eric Dumazet [Tue, 12 Apr 2011 20:39:14 +0000]
bridge: reset IPCB in br_parse_ip_options

Commit 462fb2af9788a82 (bridge : Sanitize skb before it enters the IP
stack), missed one IPCB init before calling ip_options_compile()

Thanks to Scot Doyle for his tests and bug reports.

Reported-by: Scot Doyle <lkml@scotdoyle.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Hiroaki SHIMODA <shimoda.hiroaki@gmail.com>
Acked-by: Bandan Das <bandan.das@stratus.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Cc: Jan Lübbe <jluebbe@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosfc: Do not use efx_process_channel_now() in online self-test
Ben Hutchings [Mon, 4 Apr 2011 13:22:11 +0000]
sfc: Do not use efx_process_channel_now() in online self-test

During self-tests we use efx_process_channel_now() to handle
completion and other events synchronously.  This disables interrupts
and NAPI processing for the channel in question, but it may still be
interrupted by another channel.  A single socket may receive packets
from multiple net devices or even multiple channels of the same net
device, so this can result in deadlock on a socket lock.

Receiving packets in process context will also result in incorrect
classification by the network cgroup classifier.

Therefore, we must only use efx_process_channel_now() in the offline
loopback tests (which never deliver packets up the stack) and not for
the online interrupt and event tests.

For the interrupt test, there is no reason to process events.  We
only care that an interrupt is raised.

For the event test, we want to know whether events have been received,
and there may be many events ahead of the one we inject.  Therefore
remove efx_channel::magic_count and instead test whether
efx_channel::eventq_read_ptr advances.  This is currently an event
queue index and might wrap around to exactly the same value, resulting
in a false negative.  Therefore move the masking to efx_event() and
efx_nic_eventq_read_ack() so that it cannot wrap within the time of
the test.

The event test also tries to diagnose failures by checking whether an
event was delivered without causing an interrupt.  Add and use a
helper function that only does this.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

8 years agosfc: Stop the TX queues during loopback self-tests
Neil Turton [Mon, 4 Apr 2011 12:46:23 +0000]
sfc: Stop the TX queues during loopback self-tests

If the TX queues are running during loopback self tests, host
traffic gets looped back which causes the test to fail.  Avoid
restarting the TX queues after the port reset so that any packets
sent by the host get held back until after the tests have completed.

[bwh: Also wake all TX queues at the end of self-tests.]

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>

8 years agollc: Fix length check in llc_fixup_skb().
David S. Miller [Tue, 12 Apr 2011 01:59:05 +0000]
llc: Fix length check in llc_fixup_skb().

Fixes bugzilla #32872

The LLC stack pretends to support non-linear skbs but there is a
direct use of skb_tail_pointer() in llc_fixup_skb().

Use pskb_may_pull() to see if data_size bytes remain and can be
accessed linearly in the packet, instead of direct pointer checks.

Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocaif: performance bugfix - allow radio stack to prioritize packets.
Sjur Brændeland [Mon, 11 Apr 2011 10:11:30 +0000]
caif: performance bugfix - allow radio stack to prioritize packets.

    In the CAIF Payload message the Packet Type indication must be set to
    UNCLASSIFIED in order to allow packet prioritization in the modem's
    network stack. Otherwise TCP-Ack is not prioritized in the modems
    transmit queue.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agocaif: Bugfix use for_each_safe when removing list nodes.
Sjur Brændeland [Mon, 11 Apr 2011 10:11:29 +0000]
caif: Bugfix use for_each_safe when removing list nodes.

Signed-off-by: Sjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonetxen: limit skb frags for non tso packet
amit salecha [Mon, 11 Apr 2011 02:10:22 +0000]
netxen: limit skb frags for non tso packet

Machines are getting deadlock in four node cluster environment.
All nodes are accessing (find /gfs2 -depth -print|cpio -ocv > /dev/null)
200 GB storage on a GFS2 filesystem.
This result in memory fragmentation and driver receives 18 frags for
1448 byte packets.
For non tso packet, fw drops the tx request, if it has >14 frags.

Fixing it by pulling extra frags.

Cc: stable@kernel.org
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding:fix two typos
Peter Pan(潘卫平) [Mon, 11 Apr 2011 00:16:32 +0000]
bonding:fix two typos

replace relpy with reply.
replace premanent with permanent.

Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agonet: fix tranmitted/tranmitting typo
Peter Pan(潘卫平) [Mon, 11 Apr 2011 00:15:57 +0000]
net: fix tranmitted/tranmitting typo

replace tranmitted with transmitted.
replace tranmitting with transmitting.

Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding:delete unused rlb_interval_counter
Peter Pan(潘卫平) [Sun, 10 Apr 2011 22:17:25 +0000]
bonding:delete unused rlb_interval_counter

Now, alb_bond_info uses rx_ntt,rlb_update_delay_counter and
rlb_update_retry_counter to decide when to call rlb_update_rx_clients().

Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding:delete unused alb_timer
Peter Pan(潘卫平) [Sun, 10 Apr 2011 22:17:24 +0000]
bonding:delete unused alb_timer

Now bonding-alb uses delayed_work instead of timer_list.

Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agobonding:set save_load to 0 when initializing
Peter Pan(潘卫平) [Fri, 8 Apr 2011 03:40:19 +0000]
bonding:set save_load to 0 when initializing

It is unnecessary to set save_load to 1 here,
as the tx_hashtbl is just kzalloced.

Signed-off-by: Weiping Pan(潘卫平) <panweiping3@gmail.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agostmmac: fix Transmit Underflow error
Giuseppe CAVALLARO [Sun, 10 Apr 2011 23:16:46 +0000]
stmmac: fix Transmit Underflow error

On some old MAC chips without COE sometime the
Transmit Underflow error is issued.

The driver aborted all the transmission process
and initialized it from scratch.
This breaks the network activity as raised by Nachiketa
on a SPEAr board.

The patch is to fix this rare underflow event.
The driver will only clear the interrupt and the Tx
DMA will go out the Suspend state as soon as the
descriptor is fetched again.
The driver will continue to bump-up the DMA FIFO threshold
that, indeed, helped somebody to prevent this kind of error
in the past as well.

Reported-by: Nachiketa Prachanda <nprachanda@ncomputing.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agostmmac: fix open funct when exit on error
Giuseppe CAVALLARO [Sun, 10 Apr 2011 23:16:45 +0000]
stmmac: fix open funct when exit on error

This patch reviews the open function and fixes some
errors when exit with an error state.
It also moves the request_irq after core is initialized
when interrupts are properly masked.

Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com>
Hacked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agostmmac: fixed dma lib build when turn-on the debug option
Giuseppe CAVALLARO [Sun, 10 Apr 2011 23:16:44 +0000]
stmmac: fixed dma lib build when turn-on the debug option

This patch fixes a compilation error when build the
dwmac_lib with the DEBUG option enabled.

Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Mon, 11 Apr 2011 19:53:51 +0000]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6