7 years agopata_cs5535: no need to program PIO0 timings during device init
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 18:04:05 +0000]
pata_cs5535: no need to program PIO0 timings during device init

Core libata code takes care of it nowadays.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_cmd64x: add cmd64x_fixup()
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 17:56:03 +0000]
pata_cmd64x: add cmd64x_fixup()

Factor out common code from cmd64x_[re]init_one() to cmd64x_fixup().

Remove stale comment and fix a minor CodingStyle issue while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_hpt366: add hpt36x_find_mode() helper
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 17:52:31 +0000]
pata_hpt366: add hpt36x_find_mode() helper

Factor out code for finding the register programming information
from hpt366_set_mode() to hpt36x_find_mode().

This makes pata_hpt366 driver more similar to pata_{37x,3x2n} ones.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_artop: unify ->prereset methods
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 17:45:52 +0000]
pata_artop: unify ->prereset methods

* Unify ->prereset methods for ATP850 and ATP86x[R] chipsets.

* Fix ->prereset documentation while at it.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sc1200: do not use c99 style comments
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 18:05:49 +0000]
pata_sc1200: do not use c99 style comments

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_at91: call clk_put() on ata_host_activate() failure
Sergei Shtylyov [Mon, 10 Oct 2011 15:09:17 +0000]
pata_at91: call clk_put() on ata_host_activate() failure

pata_at91_probe() forgets to call clk_put() iff ata_host_activate() fails...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agolibata: reduce ata_pci_[sff,bmdma]_init_one() size
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 17:22:16 +0000]
libata: reduce ata_pci_[sff,bmdma]_init_one() size

Turn both helpers (which are used only during LLDs initialization
time and thus are not performance sensitive) into wrappers around
the new ata_pci_init_one() function, this cuts 20 LOC and saves
~1.1k of the output code size (x86-64):

 text    data     bss     dec     hex filename
  21392       0      19   21411    53a3 drivers/ata/libata-sff.o.before
  20256       0      19   20275    4f33 drivers/ata/libata-sff.o.after

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_cs5535: fix DRV_NAME
Bartlomiej Zolnierkiewicz [Thu, 13 Oct 2011 10:52:21 +0000]
pata_cs5535: fix DRV_NAME

.. and also a module description while at it.

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sc1200: fix DRV_NAME
Bartlomiej Zolnierkiewicz [Thu, 13 Oct 2011 10:53:05 +0000]
pata_sc1200: fix DRV_NAME

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sil680: minor CodingStyle fixups
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 18:21:50 +0000]
pata_sil680: minor CodingStyle fixups

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sil680: constify tables
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 18:20:28 +0000]
pata_sil680: constify tables

Constify tables in sil680_set_[pio,dma]mode().

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sil680: documentation fixes
Bartlomiej Zolnierkiewicz [Tue, 11 Oct 2011 18:17:05 +0000]
pata_sil680: documentation fixes

Fix documentation for sil680_sel[reg,dev]() and sil680_set_[pio,dma]mode().

Acked-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agoata: irq: Remove IRQF_DISABLED
Yong Zhang [Wed, 21 Sep 2011 09:28:26 +0000]
ata: irq: Remove IRQF_DISABLED

Since commit [c58543c8: genirq: Run irq handlers with interrupts disabled],
We run all interrupt handlers with interrupts disabled
and we even check and yell when an interrupt handler
returns with interrupts enabled (see commit [b738a50a:
genirq: Warn when handler enables interrupts]).

So now this flag is a NOOP and can be removed.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agoata: Make pata_of_platform.c compile again and work on non-PPC platforms
Pawel Moll [Wed, 7 Sep 2011 12:36:26 +0000]
ata: Make pata_of_platform.c compile again and work on non-PPC platforms

This patch adds missing #includes, makes the driver selectable on
non-PPC OF-enabled platforms and fixes property value accesses to
be correct in Little Endian system.

Cc: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sis: code style cleanups for consistency
Dan McGee [Wed, 7 Sep 2011 16:23:22 +0000]
pata_sis: code style cleanups for consistency

Remove a lot of '  ' (double spaces) as well as ensuring use of tabs vs.
spaces is appropriate and consistent.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sis: mark most const data static as well
Dan McGee [Wed, 7 Sep 2011 16:23:21 +0000]
pata_sis: mark most const data static as well

This pushes timing and other values into preinitialized read-only data
sections rather than being inlined into the code. None of these
functions are called more than a handful of times, so reducing code size
makes sense.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sis: enable MWDMA for UDMA 133 chipset
Dan McGee [Wed, 7 Sep 2011 16:23:20 +0000]
pata_sis: enable MWDMA for UDMA 133 chipset

This ports the timing values over from the old IDE driver into the new
PATA-based one. The comment was lying when it stated the old driver was
not MWDMA capable.

Boot tested on actual hardware using 'libata.force=mwdma2'.

Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sis: add mode_filter method for certain sis5513 chipsets
Dan McGee [Wed, 7 Sep 2011 16:23:19 +0000]
pata_sis: add mode_filter method for certain sis5513 chipsets

This mirrors a very old commit (3160d5416f39da9d9, "sis5513: add
->udma_filter method for chipset_family >= ATA_133") to the old sis5513
IDE driver that prevents certain setups from working.

UDMA6 (ATA/133) is not supported on some chipsets and we need to ensure
this mode is not chosen even if a connected drive supports it. Port this
old patch forward to the new PATA driver to ensure UDMA5 is the highest
mode used if that is what is supported.

Kernel bugzilla #41582.

Reviewed-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agopata_sis: extract a sis_port_base() method
Dan McGee [Wed, 7 Sep 2011 16:23:18 +0000]
pata_sis: extract a sis_port_base() method

This is similar to the existing sis_old_port_base() method. We do this
same calculation and logic in multiple places (with one more to come in
a future patch), so extracting it into a method makes sense.

Reviewed-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years ago[libata] ahci_platform: Add the board_ids and pi refer to different features
Richard Zhu [Wed, 28 Sep 2011 07:41:54 +0000]
[libata] ahci_platform: Add the board_ids and pi refer to different features

On imx53 AHCI, soft reset fails with IPMS set when PMP
is enabled but SATA HDD/ODD is connected to SATA port,
do soft reset again to port 0.
So the 'ahci_pmp_retry_srst_ops' is required when imx53
ahci is present.

Signed-off-by: Richard Zhu <richard.zhu@linaro.org>
Acked-by: Eric Miao <eric.miao@linaro.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agolibata-eh: ata_eh_followup_srst_needed() does not need 'classes' parameter
Sergei Shtylyov [Tue, 9 Aug 2011 19:25:50 +0000]
libata-eh: ata_eh_followup_srst_needed() does not need 'classes' parameter

... since it does not use it.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agosata_sil24: Use const
Joe Perches [Sat, 6 Aug 2011 02:38:17 +0000]
sata_sil24: Use const

Reduce data by using const.

$ size drivers/ata/sata_sil24.o*
   text    data     bss     dec     hex filename
  12764     614    2688   16066    3ec2 drivers/ata/sata_sil24.o.new
  12320    1058    2688   16066    3ec2 drivers/ata/sata_sil24.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agoata_piix: make DVD Drive recognisable on systems with Intel Sandybridge chipsets(v2)
Ming Lei [Fri, 7 Oct 2011 03:50:22 +0000]
ata_piix: make DVD Drive recognisable on systems with Intel Sandybridge chipsets(v2)

This quirk patch fixes one kind of bug inside some Intel Sandybridge
chipsets, see reports from

       https://bugzilla.kernel.org/show_bug.cgi?id=40592.

Many guys also have reported the problem before:

https://bugs.launchpad.net/bugs/737388
https://bugs.launchpad.net/bugs/794642
https://bugs.launchpad.net/bugs/782389
......

With help from Tejun, the problem is found to be caused by 32bit PIO
mode, so introduce the quirk patch to disable 32bit PIO on SATA piix
for some Sandybridge CPT chipsets.

Seth also tested the patch on all five affected chipsets
(pci device ID: 0x1c00, 0x1c01, 0x1d00, 0x1e00, 0x1e01), and found
the patch does fix the problem.

Tested-by: Heasley, Seth <seth.heasley@intel.com>
Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Cc: stable@kernel.org

7 years agolibata: clear PIO pad area
Tejun Heo [Tue, 6 Sep 2011 04:09:05 +0000]
libata: clear PIO pad area

ata_sff_data_xfer[32]() use pad area if the transfer size isn't
multiple of transfer size; however, this area wasn't cleared and
garbage data in pad area could be transferred to the device.  Make
sure the pad area is cleared.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Lei Ming <tom.leiming@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agosata_mv: use {platform|pci}_get_drvdata()
Sergei Shtylyov [Fri, 7 Oct 2011 15:24:22 +0000]
sata_mv: use {platform|pci}_get_drvdata()

The driver uses dev_get_drvdata() to get to the driver data for the
platform and PCI devices, while the corresponding wrappers exists for
them -- in one case it even declares an otherwise unneeded variable
to do that.  Switch to using the {platform|pci}_get_drvdata() instead.

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agosata_mv: release clock on ata_host_activate() failure
Sergei Shtylyov [Fri, 7 Oct 2011 15:22:33 +0000]
sata_mv: release clock on ata_host_activate() failure

mv_platfrom_probe() forgets to call clk_disable() and clk_put() iff
ata_host_activate() fails...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

7 years agoMerge git://github.com/davem330/net
Linus Torvalds [Thu, 6 Oct 2011 23:15:10 +0000]
Merge git://github.com/davem330/net

* git://github.com/davem330/net:
  net: fix typos in Documentation/networking/scaling.txt
  bridge: leave carrier on for empty bridge
  netfilter: Use proper rwlock init function
  tcp: properly update lost_cnt_hint during shifting
  tcp: properly handle md5sig_pool references
  macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode

7 years agox86/PCI: use host bridge _CRS info on ASUS M2V-MX SE
Paul Menzel [Wed, 31 Aug 2011 15:07:10 +0000]
x86/PCI: use host bridge _CRS info on ASUS M2V-MX SE

In summary, this DMI quirk uses the _CRS info by default for the ASUS
M2V-MX SE by turning on `pci=use_crs` and is similar to the quirk
added by commit 2491762cfb47 ("x86/PCI: use host bridge _CRS info on
ASRock ALiveSATA2-GLAN") whose commit message should be read for further
information.

Since commit 3e3da00c01d0 ("x86/pci: AMD one chain system to use pci
read out res") Linux gives the following oops:

    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    HDA Intel 0000:20:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    HDA Intel 0000:20:01.0: setting latency timer to 64
    BUG: unable to handle kernel paging request at ffffc90011c08000
    IP: [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
    PGD 13781a067 PUD 13781b067 PMD 1300ba067 PTE 800000fd00000173
    Oops: 0009 [#1] SMP
    last sysfs file: /sys/module/snd_pcm/initstate
    CPU 0
    Modules linked in: snd_hda_intel(+) snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event tpm_tis tpm snd_seq tpm_bios psmouse parport_pc snd_timer snd_seq_device parport processor evdev snd i2c_viapro thermal_sys amd64_edac_mod k8temp i2c_core soundcore shpchp pcspkr serio_raw asus_atk0110 pci_hotplug edac_core button snd_page_alloc edac_mce_amd ext3 jbd mbcache sha256_generic cryptd aes_x86_64 aes_generic cbc dm_crypt dm_mod raid1 md_mod usbhid hid sg sd_mod crc_t10dif sr_mod cdrom ata_generic uhci_hcd sata_via pata_via libata ehci_hcd usbcore scsi_mod via_rhine mii nls_base [last unloaded: scsi_wait_scan]
    Pid: 1153, comm: work_for_cpu Not tainted 2.6.37-1-amd64 #1 M2V-MX SE/System Product Name
    RIP: 0010:[<ffffffffa0578402>]  [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
    RSP: 0018:ffff88013153fe50  EFLAGS: 00010286
    RAX: ffffc90011c08000 RBX: ffff88013029ec00 RCX: 0000000000000006
    RDX: 0000000000000000 RSI: 0000000000000246 RDI: 0000000000000246
    RBP: ffff88013341d000 R08: 0000000000000000 R09: 0000000000000040
    R10: 0000000000000286 R11: 0000000000003731 R12: ffff88013029c400
    R13: 0000000000000000 R14: 0000000000000000 R15: ffff88013341d090
    FS:  0000000000000000(0000) GS:ffff8800bfc00000(0000) knlGS:00000000f7610ab0
    CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
    CR2: ffffc90011c08000 CR3: 0000000132f57000 CR4: 00000000000006f0
    DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    Process work_for_cpu (pid: 1153, threadinfo ffff88013153e000, task ffff8801303c86c0)
    Stack:
     0000000000000005 ffffffff8123ad65 00000000000136c0 ffff88013029c400
     ffff8801303c8998 ffff88013341d000 ffff88013341d090 ffff8801322d9dc8
     ffff88013341d208 0000000000000000 0000000000000000 ffffffff811ad232
    Call Trace:
     [<ffffffff8123ad65>] ? __pm_runtime_set_status+0x162/0x186
     [<ffffffff811ad232>] ? local_pci_probe+0x49/0x92
     [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b
     [<ffffffff8105afc5>] ? do_work_for_cpu+0x0/0x1b
     [<ffffffff8105afd0>] ? do_work_for_cpu+0xb/0x1b
     [<ffffffff8105fd3f>] ? kthread+0x7a/0x82
     [<ffffffff8100a824>] ? kernel_thread_helper+0x4/0x10
     [<ffffffff8105fcc5>] ? kthread+0x0/0x82
     [<ffffffff8100a820>] ? kernel_thread_helper+0x0/0x10
    Code: f4 01 00 00 ef 31 f6 48 89 df e8 29 dd ff ff 85 c0 0f 88 2b 03 00 00 48 89 ef e8 b4 39 c3 e0 8b 7b 40 e8 fc 9d b1 e0 48 8b 43 38 <66> 8b 10 66 89 14 24 8b 43 14 83 e8 03 83 f8 01 77 32 31 d2 be
    RIP  [<ffffffffa0578402>] azx_probe+0x3ad/0x86b [snd_hda_intel]
     RSP <ffff88013153fe50>
    CR2: ffffc90011c08000
    ---[ end trace 8d1f3ebc136437fd ]---

Trusting the ACPI _CRS information (`pci=use_crs`) fixes this problem.

    $ dmesg | grep -i crs # with the quirk
    PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

The match has to be against the DMI board entries though since the vendor entries are not populated.

    DMI: System manufacturer System Product Name/M2V-MX SE, BIOS 0304    10/30/2007

This quirk should be removed when `pci=use_crs` is enabled for machines
from 2006 or earlier or some other solution is implemented.

Using coreboot [1] with this board the problem does not exist but this
quirk also does not affect it either. To be safe though the check is
tightened to only take effect when the BIOS from American Megatrends is
used.

        15:13 < ruik> but coreboot does not need that
        15:13 < ruik> because i have there only one root bus
        15:13 < ruik> the audio is behind a bridge

        $ sudo dmidecode
        BIOS Information
                Vendor: American Megatrends Inc.
                Version: 0304
                Release Date: 10/30/2007

[1] http://www.coreboot.org/

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=30552

Cc: stable@kernel.org (2.6.34)
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: x86@kernel.org
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agonet: fix typos in Documentation/networking/scaling.txt
Benjamin Poirier [Tue, 4 Oct 2011 04:00:30 +0000]
net: fix typos in Documentation/networking/scaling.txt

The second hunk fixes rps_sock_flow_table but has to re-wrap the paragraph.

Signed-off-by: Benjamin Poirier <benjamin.poirier@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobridge: leave carrier on for empty bridge
stephen hemminger [Mon, 3 Oct 2011 18:14:45 +0000]
bridge: leave carrier on for empty bridge

This resolves a regression seen by some users of bridging.
Some users use the bridge like a dummy device.
They expect to be able to put an IPv6 address on the device
with no ports attached. Although there are better ways of doing
this, there is no reason to not allow it.

Note: the bridge still will reflect the state of ports in the
bridge if there are any added.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'for-linus' of http://people.redhat.com/agk/git/linux-dm
Linus Torvalds [Thu, 6 Oct 2011 15:31:47 +0000]
Merge branch 'for-linus' of people.redhat.com/agk/git/linux-dm

* 'for-linus' of http://people.redhat.com/agk/git/linux-dm:
  dm crypt: always disable discard_zeroes_data
  dm: raid fix write_mostly arg validation
  dm table: avoid crash if integrity profile changes
  dm: flakey fix corrupt_bio_byte error path

7 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Thu, 6 Oct 2011 15:30:03 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: Avoid waking up a thread after it has been freed.

7 years agonetfilter: Use proper rwlock init function
Thomas Gleixner [Wed, 5 Oct 2011 03:24:43 +0000]
netfilter: Use proper rwlock init function

Replace the open coded initialization with the init function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Hans Schillstrom <hans.schillstrom@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMerge branch 'for-linus' of git://github.com/dtor/input
Linus Torvalds [Wed, 5 Oct 2011 16:22:38 +0000]
Merge branch 'for-linus' of git://github.com/dtor/input

* 'for-linus' of git://github.com/dtor/input:
  Input: wacom - revert "Cintiq 21UX2 does not have menu strips"

7 years agoMerge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6
Linus Torvalds [Wed, 5 Oct 2011 16:16:11 +0000]
Merge git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6

* git://bedivere.hansenpartnership.com/git/scsi-rc-fixes-2.6:
  [SCSI] libsas: fix panic when single phy is disabled on a wide port
  [SCSI] qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload

7 years agoInput: wacom - revert "Cintiq 21UX2 does not have menu strips"
Jason Gerecke [Wed, 5 Oct 2011 05:50:45 +0000]
Input: wacom - revert "Cintiq 21UX2 does not have menu strips"

This reverts commit 71c86ce59791bcd67af937bbea719a508079d7c2.
The 21UX2 does have touchstrips, but they are in a somewhat-
hidden location.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Acked-by: Ping Cheng <pinglinux@gmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

7 years agotcp: properly update lost_cnt_hint during shifting
Yan, Zheng [Sun, 2 Oct 2011 04:21:50 +0000]
tcp: properly update lost_cnt_hint during shifting

lost_skb_hint is used by tcp_mark_head_lost() to mark the first unhandled skb.
lost_cnt_hint is the number of packets or sacked packets before the lost_skb_hint;
When shifting a skb that is before the lost_skb_hint, if tcp_is_fack() is ture,
the skb has already been counted in the lost_cnt_hint; if tcp_is_fack() is false,
tcp_sacktag_one() will increase the lost_cnt_hint. So tcp_shifted_skb() does not
need to adjust the lost_cnt_hint by itself. When shifting a skb that is equal to
lost_skb_hint, the shifted packets will not be counted by tcp_mark_head_lost().
So tcp_shifted_skb() should adjust the lost_cnt_hint even tcp_is_fack(tp) is true.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agotcp: properly handle md5sig_pool references
Yan, Zheng [Thu, 29 Sep 2011 17:10:10 +0000]
tcp: properly handle md5sig_pool references

tcp_v4_clear_md5_list() assumes that multiple tcp md5sig peers
only hold one reference to md5sig_pool. but tcp_v4_md5_do_add()
increases use count of md5sig_pool for each peer. This patch
makes tcp_v4_md5_do_add() only increases use count for the first
tcp md5sig peer.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agomacvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode
David Ward [Sun, 18 Sep 2011 12:53:20 +0000]
macvlan/macvtap: Fix unicast between macvtap interfaces in bridge mode

Packets should always be forwarded to the lowerdev using dev_forward_skb.
vlan->forward is for packets being forwarded directly to another macvlan/
macvtap device (used for multicast in bridge mode).

Reported-and-tested-by: Shlomo Pongratz <shlomop@mellanox.com>
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoLinux 3.1-rc9
Linus Torvalds [Wed, 5 Oct 2011 01:11:50 +0000]
Linux 3.1-rc9

7 years agoMerge git://github.com/davem330/net
Linus Torvalds [Tue, 4 Oct 2011 17:37:06 +0000]
Merge git://github.com/davem330/net

* git://github.com/davem330/net:
  pch_gbe: Fixed the issue on which a network freezes
  pch_gbe: Fixed the issue on which PC was frozen when link was downed.
  make PACKET_STATISTICS getsockopt report consistently between ring and non-ring
  net: xen-netback: correctly restart Tx after a VM restore/migrate
  bonding: properly stop queuing work when requested
  can bcm: fix incomplete tx_setup fix
  RDSRDMA: Fix cleanup of rds_iw_mr_pool
  net: Documentation: Fix type of variables
  ibmveth: Fix oops on request_irq failure
  ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
  cxgb4: Fix EEH on IBM P7IOC
  can bcm: fix tx_setup off-by-one errors
  MAINTAINERS: tehuti: Alexander Indenbaum's address bounces
  dp83640: reduce driver noise
  ptp: fix L2 event message recognition

7 years agoMerge branch 'fix/asoc' of git://github.com/tiwai/sound
Linus Torvalds [Tue, 4 Oct 2011 16:59:22 +0000]
Merge branch 'fix/asoc' of git://github.com/tiwai/sound

* 'fix/asoc' of git://github.com/tiwai/sound:
  ASoC: omap_mcpdm_remove cannot be __devexit
  ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC
  ASoC: use a valid device for dev_err() in Zylonite

7 years agoMerge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Linus Torvalds [Tue, 4 Oct 2011 16:54:18 +0000]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: fix channel_remap setup (v2)
  drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.
  drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.
  drm/radeon: Simplify cursor x/yorigin calculation.
  drm/radeon/kms: fix cursor image off-by-one error
  drm/radeon/kms: Fix logic error in DP HPD handler
  drm/radeon/kms: add retry limits for native DP aux defer
  drm/radeon/kms: fix regression in DP aux defer handling

7 years agoMerge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6
Linus Torvalds [Tue, 4 Oct 2011 16:52:56 +0000]
Merge branch 'spi/merge' of git://git.secretlab.ca/git/linux-2.6

* 'spi/merge' of git://git.secretlab.ca/git/linux-2.6:
  spi-topcliff-pch: Fix overrun issue
  spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs
  spi-topcliff-pch: Fix CPU read complete condition issue
  spi-topcliff-pch: Fix SSN Control issue
  spi-topcliff-pch: add tx-memory clear after complete transmitting

7 years agoPCI: Disable MPS configuration by default
Jon Mason [Mon, 3 Oct 2011 14:50:20 +0000]
PCI: Disable MPS configuration by default

Add the ability to disable PCI-E MPS turning and using the BIOS
configured MPS defaults.  Due to the number of issues recently
discovered on some x86 chipsets, make this the default behavior.

Also, add the option for peer to peer DMA MPS configuration.  Peer to
peer DMA is outside the scope of this patch, but MPS configuration could
prevent it from working by having the MPS on one root port different
than the MPS on another.  To work around this, simply make the system
wide MPS the smallest possible value (128B).

Signed-off-by: Jon Mason <mason@myri.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agodrm/radeon/kms: fix channel_remap setup (v2)
Alex Deucher [Tue, 4 Oct 2011 14:46:34 +0000]
drm/radeon/kms: fix channel_remap setup (v2)

Most asics just use the hw default value which requires
no explicit programming.  For those that need a different
value, the vbios will program it properly.  As such,
there's no need to program these registers explicitly
in the driver.  Changing MC_SHARED_CHREMAP requires a reload
of all data in vram otherwise its contents will be scambled.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=40103

v2: drop now unused channel_remap functions.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agospi-topcliff-pch: Fix overrun issue
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:38 +0000]
spi-topcliff-pch: Fix overrun issue

We found that adding load, Rx data sometimes drops.(with DMA transfer mode)
The cause is that before starting Rx-DMA processing, Tx-DMA processing starts.
This causes FIFO overrun occurs.

This patch fixes the issue by modifying FIFO tx-threshold and DMA descriptor
size like below.

                      Current                   this patch
Rx-descriptor   4Byte+12Byte*341    -->    12Byte*340-4Byte-12Byte
Rx-threshold                   (Not modified)
Tx-descriptor   4Byte+12Byte*341    -->    16Byte-12Byte*340
Rx-threshold    12Byte              -->    2Byte

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agospi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:37 +0000]
spi-topcliff-pch: Add recovery processing in case FIFO overrun error occurs

Add recovery processing in case FIFO overrun error occurs with DMA transfer mode.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agospi-topcliff-pch: Fix CPU read complete condition issue
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:36 +0000]
spi-topcliff-pch: Fix CPU read complete condition issue

We found Rx data sometimes drops.(with non-DMA transfer mode)
The cause is read complete condition is not true.

This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agospi-topcliff-pch: Fix SSN Control issue
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:35 +0000]
spi-topcliff-pch: Fix SSN Control issue

During processing 1 command/data series,
SSN should keep LOW.
However, currently, SSN becomes HIGH.
This patch fixes the issue.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agospi-topcliff-pch: add tx-memory clear after complete transmitting
Tomoya MORINAGA [Tue, 6 Sep 2011 08:16:34 +0000]
spi-topcliff-pch: add tx-memory clear after complete transmitting

Currently, in case of reading date from SPI flash,
command is sent twice.
The cause is that tx-memory clear processing is missing .
This patch adds the tx-momory clear processing.

Signed-off-by: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>

7 years agolis3: fix regression of HP DriveGuard with 8bit chip
Takashi Iwai [Tue, 4 Oct 2011 01:09:14 +0000]
lis3: fix regression of HP DriveGuard with 8bit chip

Commit 2a7fade7e03 ("hwmon: lis3: Power on corrections") caused a
regression on HP laptops with 8bit chip.  Writing CTRL2_BOOT_8B bit seems
clearing the BIOS setup, and no proper interrupt for DriveGuard will be
triggered any more.

Since the init code there is basically only for embedded devices, put a
pdata check so that the problematic initialization will be skipped for
hp_accel stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Eric Piel <eric.piel@tremplin-utc.net>
Cc: Samu Onkalo <samu.p.onkalo@nokia.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge branch 'hwmon-for-linus' of git://github.com/groeck/linux
Linus Torvalds [Mon, 3 Oct 2011 19:54:56 +0000]
Merge branch 'hwmon-for-linus' of git://github.com/groeck/linux

* 'hwmon-for-linus' of git://github.com/groeck/linux:
  hwmon: (coretemp) Avoid leaving around dangling pointer
  hwmon: (coretemp) Fixup platform device ID change

7 years agoMerge git://github.com/davem330/ide
Linus Torvalds [Mon, 3 Oct 2011 19:53:43 +0000]
Merge git://github.com/davem330/ide

* git://github.com/davem330/ide:
  ide-disk: Fix request requeuing

7 years agoMerge branch 'btrfs-3.0' of git://github.com/chrismason/linux
Linus Torvalds [Mon, 3 Oct 2011 19:17:44 +0000]
Merge branch 'btrfs-3.0' of git://github.com/chrismason/linux

* 'btrfs-3.0' of git://github.com/chrismason/linux:
  Btrfs: force a page fault if we have a shorty copy on a page boundary

7 years agoide-disk: Fix request requeuing
Borislav Petkov [Mon, 3 Oct 2011 18:28:18 +0000]
ide-disk: Fix request requeuing

Simon Kirby reported that on his RAID setup with idedisk underneath
the box OOMs after a couple of days of runtime. Running with
CONFIG_DEBUG_KMEMLEAK pointed to idedisk_prep_fn() which unconditionally
allocates an ide_cmd struct. However, ide_requeue_and_plug() can be
called more than once per request, either from the request issue or the
IRQ handler path and do blk_peek_request() ends up in idedisk_prep_fn()
repeatedly, allocating a struct ide_cmd everytime and "forgetting" the
previous pointer.

Make sure the code reuses the old allocated chunk.

Reported-and-tested-by: Simon Kirby <sim@hostway.ca>
Cc: <stable@kernel.org> [ 39.x, 3.0.x ]
Link: http://marc.info/?l=linux-kernel&m=131667641517919
Link: http://lkml.kernel.org/r/20110922072643.GA27232@hostway.ca
Signed-off-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agopch_gbe: Fixed the issue on which a network freezes
Toshiharu Okada [Sun, 25 Sep 2011 21:27:43 +0000]
pch_gbe: Fixed the issue on which a network freezes

The pch_gbe driver has an issue which a network stops,
when receiving traffic is high.
In the case, The link down and up are necessary to return a network.

This patch fixed this issue.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agopch_gbe: Fixed the issue on which PC was frozen when link was downed.
Toshiharu Okada [Sun, 25 Sep 2011 21:27:42 +0000]
pch_gbe: Fixed the issue on which PC was frozen when link was downed.

When a link was downed during network use,
there is an issue on which PC freezes.

This patch fixed this issue.

Signed-off-by: Toshiharu Okada <toshiharu-linux@dsn.okisemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agomake PACKET_STATISTICS getsockopt report consistently between ring and non-ring
Willem de Bruijn [Fri, 30 Sep 2011 10:38:28 +0000]
make PACKET_STATISTICS getsockopt report consistently between ring and non-ring

This is a minor change.

Up until kernel 2.6.32, getsockopt(fd, SOL_PACKET, PACKET_STATISTICS,
...) would return total and dropped packets since its last invocation. The
introduction of socket queue overflow reporting [1] changed drop
rate calculation in the normal packet socket path, but not when using a
packet ring. As a result, the getsockopt now returns different statistics
depending on the reception method used. With a ring, it still returns the
count since the last call, as counts are incremented in tpacket_rcv and
reset in getsockopt. Without a ring, it returns 0 if no drops occurred
since the last getsockopt and the total drops over the lifespan of
the socket otherwise. The culprit is this line in packet_rcv, executed
on a drop:

drop_n_acct:
        po->stats.tp_drops = atomic_inc_return(&sk->sk_drops);

As it shows, the new drop number it taken from the socket drop counter,
which is not reset at getsockopt. I put together a small example
that demonstrates the issue [2]. It runs for 10 seconds and overflows
the queue/ring on every odd second. The reported drop rates are:
ring: 16, 0, 16, 0, 16, ...
non-ring: 0, 15, 0, 30, 0, 46, 0, 60, 0 , 74.

Note how the even ring counts monotonically increase. Because the
getsockopt adds tp_drops to tp_packets, total counts are similarly
reported cumulatively. Long story short, reinstating the original code, as
the below patch does, fixes the issue at the cost of additional per-packet
cycles. Another solution that does not introduce per-packet overhead
is be to keep the current data path, record the value of sk_drops at
getsockopt() at call N in a new field in struct packetsock and subtract
that when reporting at call N+1. I'll be happy to code that, instead,
it's just more messy.

[1] http://patchwork.ozlabs.org/patch/35665/
[2] http://kernel.googlecode.com/files/test-packetsock-getstatistics.c

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet: xen-netback: correctly restart Tx after a VM restore/migrate
David Vrabel [Fri, 30 Sep 2011 06:37:51 +0000]
net: xen-netback: correctly restart Tx after a VM restore/migrate

If a VM is saved and restored (or migrated) the netback driver will no
longer process any Tx packets from the frontend.  xenvif_up() does not
schedule the processing of any pending Tx requests from the front end
because the carrier is off.  Without this initial kick the frontend
just adds Tx requests to the ring without raising an event (until the
ring is full).

This was caused by 47103041e91794acdbc6165da0ae288d844c820b (net:
xen-netback: convert to hw_features) which reordered the calls to
xenvif_up() and netif_carrier_on() in xenvif_connect().

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agobonding: properly stop queuing work when requested
Andy Gospodarek [Fri, 23 Sep 2011 10:53:34 +0000]
bonding: properly stop queuing work when requested

During a test where a pair of bonding interfaces using ARP monitoring
were both brought up and torn down (with an rmmod) repeatedly, a panic
in the timer code was noticed.  I tracked this down and determined that
any of the bonding functions that ran as workqueue handlers and requeued
more work might not properly exit when the module was removed.

There was a flag protected by the bond lock called kill_timers that is
set when the interface goes down or the module is removed, but many of
the functions that monitor link status now unlock the bond lock to take
rtnl first.  There is a chance that another CPU running the rmmod could
get the lock and set kill_timers after the first check has passed.

This patch does not allow any function to queue work that will make
itself run unless kill_timers is not set.  I also noticed while doing
this work that bond_resend_igmp_join_requests did not have a check for
kill_timers, so I added the needed call there as well.

Signed-off-by: Andy Gospodarek <andy@greyhouse.net>
Reported-by: Liang Zheng <lzheng@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agodrm/radeon: Set cursor x/y to 0 when x/yorigin > 0.
Michel Dänzer [Fri, 30 Sep 2011 15:16:53 +0000]
drm/radeon: Set cursor x/y to 0 when x/yorigin > 0.

Apart from the obvious cleanup, this should make the line

cursor_end = x - xorigin + w;

correct now.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.
Michel Dänzer [Fri, 30 Sep 2011 15:16:52 +0000]
drm/radeon: Update AVIVO cursor coordinate origin before x/yorigin calculation.

Fixes cursor disappearing prematurely when moving off a top/left edge which
is not located at the desktop top/left edge.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Cc: stable@kernel.org
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon: Simplify cursor x/yorigin calculation.
Michel Dänzer [Fri, 30 Sep 2011 15:16:51 +0000]
drm/radeon: Simplify cursor x/yorigin calculation.

Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: fix cursor image off-by-one error
Nicholas Miell [Fri, 30 Sep 2011 02:07:14 +0000]
drm/radeon/kms: fix cursor image off-by-one error

The mouse cursor hotspot calculation when the cursor is partially off the
top or left side of the screen was off by one.

Fixes https://bugs.freedesktop.org/show_bug.cgi?id=41158

Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: Fix logic error in DP HPD handler
Alex Deucher [Mon, 3 Oct 2011 12:37:33 +0000]
drm/radeon/kms: Fix logic error in DP HPD handler

Only disable the pipe if the monitor is physically
disconnected.  The previous logic also disabled the
pipe if the link was trained.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41248

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: add retry limits for native DP aux defer
Alex Deucher [Mon, 3 Oct 2011 13:13:46 +0000]
drm/radeon/kms: add retry limits for native DP aux defer

The previous code could potentially loop forever.  Limit
the number of DP aux defer retries to 4 for native aux
transactions, same as i2c over aux transactions.

Noticed by: Brad Campbell <lists2009@fnarfbargle.com>

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Brad Campbell <lists2009@fnarfbargle.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agodrm/radeon/kms: fix regression in DP aux defer handling
Alex Deucher [Mon, 3 Oct 2011 13:13:45 +0000]
drm/radeon/kms: fix regression in DP aux defer handling

An incorrect ordering in the error checking code lead
to DP aux defer being skipped in the aux native write
path.  Move the bytes transferred check (ret == 0)
below the defer check.

Tracked down by: Brad Campbell <brad@fnarfbargle.com>

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=41121

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Brad Campbell <brad@fnarfbargle.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

7 years agoMerge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6
Linus Torvalds [Mon, 3 Oct 2011 02:23:44 +0000]
Merge branch 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6

* 'for-linus' of git://git.infradead.org/users/sameo/mfd-2.6:
  mfd: Fix generic irq chip ack function name for jz4740-adc

7 years agoMerge branch 'for-linus' of git://github.com/tiwai/sound
Linus Torvalds [Mon, 3 Oct 2011 02:22:44 +0000]
Merge branch 'for-linus' of git://github.com/tiwai/sound

* 'for-linus' of git://github.com/tiwai/sound:
  ALSA: hda - Fix a regression of the position-buffer check

7 years agoASoC: omap_mcpdm_remove cannot be __devexit
Arnd Bergmann [Sun, 2 Oct 2011 14:45:31 +0000]
ASoC: omap_mcpdm_remove cannot be __devexit

omap_mcpdm_remove is used from asoc_mcpdm_probe, which is an
initcall, and must not be discarded when HOTPLUG is disabled.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

7 years agoASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC
Axel Lin [Sun, 2 Oct 2011 12:41:04 +0000]
ASoC: Fix setting update bits for WM8753_LADC and WM8753_RADC

Current code set update bits for WM8753_LDAC and WM8753_RDAC twice,
but missed setting update bits for WM8753_LADC and WM8753_RADC.

I think it is a copy-paste bug in commit 776065
"ASoC: codecs: wm8753: Fix register cache incoherency".

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

7 years ago[SCSI] libsas: fix panic when single phy is disabled on a wide port
Mark Salyzyn [Thu, 22 Sep 2011 15:32:23 +0000]
[SCSI] libsas: fix panic when single phy is disabled on a wide port

When a wide port is being utilized to a target, if one disables only one
of the
phys, we get an OS crash:

BUG: unable to handle kernel NULL pointer dereference at
0000000000000238
IP: [<ffffffff814ca9b1>] mutex_lock+0x21/0x50
PGD 4103f5067 PUD 41dba9067 PMD 0
Oops: 0002 [#1] SMP
last sysfs file: /sys/bus/pci/slots/5/address
CPU 0
Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4
ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl
auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt
llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom
dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt
iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3
jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix
libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001]

Modules linked in: pm8001(U) ses enclosure fuse nfsd exportfs autofs4
ipmi_devintf ipmi_si ipmi_msghandler nfs lockd fscache nfs_acl
auth_rpcgss 8021q fcoe libfcoe garp libfc scsi_transport_fc stp scsi_tgt
llc sunrpc cpufreq_ondemand acpi_cpufreq freq_table ipv6 sr_mod cdrom
dm_mirror dm_region_hash dm_log uinput sg i2c_i801 i2c_core iTCO_wdt
iTCO_vendor_support e1000e mlx4_ib ib_mad ib_core mlx4_en mlx4_core ext3
jbd mbcache sd_mod crc_t10dif usb_storage ata_generic pata_acpi ata_piix
libsas(U) scsi_transport_sas dm_mod [last unloaded: pm8001]
Pid: 5146, comm: scsi_wq_5 Not tainted
2.6.32-71.29.1.el6.lustre.7.x86_64 #1 Storage Server
RIP: 0010:[<ffffffff814ca9b1>]  [<ffffffff814ca9b1>]
mutex_lock+0x21/0x50
RSP: 0018:ffff8803e4e33d30  EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000238 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff8803e664c800 RDI: 0000000000000238
RBP: ffff8803e4e33d40 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000238 R14: ffff88041acb7200 R15: ffff88041c51ada0
FS:  0000000000000000(0000) GS:ffff880028200000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: 0000000000000238 CR3: 0000000410143000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process scsi_wq_5 (pid: 5146, threadinfo ffff8803e4e32000, task
ffff8803e4e294a0)
Stack:
 ffff8803e664c800 0000000000000000 ffff8803e4e33d70 ffffffffa001f06e
<0> ffff8803e4e33d60 ffff88041c51ada0 ffff88041acb7200 ffff88041bc0aa00
<0> ffff8803e4e33d90 ffffffffa0032b6c 0000000000000014 ffff88041acb7200
Call Trace:
 [<ffffffffa001f06e>] sas_port_delete_phy+0x2e/0xa0 [scsi_transport_sas]
 [<ffffffffa0032b6c>] sas_unregister_devs_sas_addr+0xac/0xe0 [libsas]
 [<ffffffffa0034914>] sas_ex_revalidate_domain+0x204/0x330 [libsas]
 [<ffffffffa00307f0>] ? sas_revalidate_domain+0x0/0x90 [libsas]
 [<ffffffffa0030855>] sas_revalidate_domain+0x65/0x90 [libsas]
 [<ffffffff8108c7d0>] worker_thread+0x170/0x2a0
 [<ffffffff81091ea0>] ? autoremove_wake_function+0x0/0x40
 [<ffffffff8108c660>] ? worker_thread+0x0/0x2a0
 [<ffffffff81091b36>] kthread+0x96/0xa0
 [<ffffffff810141ca>] child_rip+0xa/0x20
 [<ffffffff81091aa0>] ? kthread+0x0/0xa0
 [<ffffffff810141c0>] ? child_rip+0x0/0x20
Code: ff ff 85 c0 75 ed eb d6 66 90 55 48 89 e5 48 83 ec 10 48 89 1c 24
4c 89 64 24 08 0f 1f 44 00 00 48 89 fb e8 92 f4 ff ff 48 89 df <f0> ff
0f 79 05 e8 25 00 00 00 65 48 8b 04 25 08 cc 00 00 48 2d
RIP  [<ffffffff814ca9b1>] mutex_lock+0x21/0x50
 RSP <ffff8803e4e33d30>
CR2: 0000000000000238

The following patch is admittedly a band-aid, and does not solve the
root cause, but it still is a good candidate for hardening as a pointer
check before reference.

Signed-off-by: Mark Salyzyn <mark_salyzyn@us.xyratex.com>
Tested-by: Jack Wang <jack_wang@usish.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

7 years agoASoC: use a valid device for dev_err() in Zylonite
Arnd Bergmann [Sat, 1 Oct 2011 20:03:34 +0000]
ASoC: use a valid device for dev_err() in Zylonite

A recent conversion has introduced references to &pdev->dev, which does
not actually exist in all the contexts it's used in.

Replace this with card->dev where necessary, in order to let
the driver build again.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org

7 years ago[SCSI] qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload
Roland Dreier [Thu, 22 Sep 2011 07:06:05 +0000]
[SCSI] qla2xxx: Fix crash in qla2x00_abort_all_cmds() on unload

I hit a crash in qla2x00_abort_all_cmds() if the qla2xxx module is
unloaded right after it is loaded.  I debugged this down to the abort
handling improperly treating a command of type SRB_ADISC_CMD as if it
had a bsg_job to complete when that command actually uses the iocb_cmd
part of the union.  (I guess to hit this one has to unload the module
while the async FC initialization is still in progress)

It seems we should only look for a bsg_job if type is SRB_ELS_CMD_RPT,
SRB_ELS_CMD_HST or SRB_CT_CMD, so switch the test to make that explicit.

Signed-off-by: Roland Dreier <roland@purestorage.com>
Acked-by: Chad Dupuis <chad.dupuis@qlogic.com>
Cc: stable@kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

7 years agoMerge branch 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip
Linus Torvalds [Sun, 2 Oct 2011 00:46:13 +0000]
Merge branch 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'perf-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  perf tools: Fix raw sample reading

7 years agoMerge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for...
Linus Torvalds [Sat, 1 Oct 2011 15:37:25 +0000]
Merge branches 'irq-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip

* 'irq-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  irq: Fix check for already initialized irq_domain in irq_domain_add
  irq: Add declaration of irq_domain_simple_ops to irqdomain.h

* 'x86-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  x86/rtc: Don't recursively acquire rtc_lock

* 'sched-urgent-for-linus' of git://tesla.tglx.de/git/linux-2.6-tip:
  posix-cpu-timers: Cure SMP wobbles
  sched: Fix up wchan borkage
  sched/rt: Migrate equal priority tasks to available CPUs

7 years agoBtrfs: force a page fault if we have a shorty copy on a page boundary
Josef Bacik [Fri, 30 Sep 2011 19:23:54 +0000]
Btrfs: force a page fault if we have a shorty copy on a page boundary

A user reported a problem where ceph was getting into 100% cpu usage while doing
some writing.  It turns out it's because we were doing a short write on a not
uptodate page, which means we'd fall back at one page at a time and fault the
page in.  The problem is our position is on the page boundary, so our fault in
logic wasn't actually reading the page, so we'd just spin forever or until the
page got read in by somebody else.  This will force a readpage if we end up
doing a short copy.  Alexandre could reproduce this easily with ceph and reports
it fixes his problem.  I also wrote a reproducer that no longer hangs my box
with this patch.  Thanks,

Reported-and-tested-by: Alexandre Oliva <aoliva@redhat.com>
Signed-off-by: Josef Bacik <josef@redhat.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>

7 years agoMerge branch 'perf/urgent' of git://github.com/acmel/linux into perf/urgent
Ingo Molnar [Fri, 30 Sep 2011 18:08:56 +0000]
Merge branch 'perf/urgent' of git://github.com/acmel/linux into perf/urgent

7 years agoposix-cpu-timers: Cure SMP wobbles
Peter Zijlstra [Thu, 1 Sep 2011 10:42:04 +0000]
posix-cpu-timers: Cure SMP wobbles

David reported:

  Attached below is a watered-down version of rt/tst-cpuclock2.c from
  GLIBC.  Just build it with "gcc -o test test.c -lpthread -lrt" or
  similar.

  Run it several times, and you will see cases where the main thread
  will measure a process clock difference before and after the nanosleep
  which is smaller than the cpu-burner thread's individual thread clock
  difference.  This doesn't make any sense since the cpu-burner thread
  is part of the top-level process's thread group.

  I've reproduced this on both x86-64 and sparc64 (using both 32-bit and
  64-bit binaries).

  For example:

  [davem@boricha build-x86_64-linux]$ ./test
  process: before(0.001221967) after(0.498624371) diff(497402404)
  thread:  before(0.000081692) after(0.498316431) diff(498234739)
  self:    before(0.001223521) after(0.001240219) diff(16698)
  [davem@boricha build-x86_64-linux]$

  The diff of 'process' should always be >= the diff of 'thread'.

  I make sure to wrap the 'thread' clock measurements the most tightly
  around the nanosleep() call, and that the 'process' clock measurements
  are the outer-most ones.

  ---
  #include <unistd.h>
  #include <stdio.h>
  #include <stdlib.h>
  #include <time.h>
  #include <fcntl.h>
  #include <string.h>
  #include <errno.h>
  #include <pthread.h>

  static pthread_barrier_t barrier;

  static void *chew_cpu(void *arg)
  {
  pthread_barrier_wait(&barrier);
  while (1)
  __asm__ __volatile__("" : : : "memory");
  return NULL;
  }

  int main(void)
  {
  clockid_t process_clock, my_thread_clock, th_clock;
  struct timespec process_before, process_after;
  struct timespec me_before, me_after;
  struct timespec th_before, th_after;
  struct timespec sleeptime;
  unsigned long diff;
  pthread_t th;
  int err;

  err = clock_getcpuclockid(0, &process_clock);
  if (err)
  return 1;

  err = pthread_getcpuclockid(pthread_self(), &my_thread_clock);
  if (err)
  return 1;

  pthread_barrier_init(&barrier, NULL, 2);
  err = pthread_create(&th, NULL, chew_cpu, NULL);
  if (err)
  return 1;

  err = pthread_getcpuclockid(th, &th_clock);
  if (err)
  return 1;

  pthread_barrier_wait(&barrier);

  err = clock_gettime(process_clock, &process_before);
  if (err)
  return 1;

  err = clock_gettime(my_thread_clock, &me_before);
  if (err)
  return 1;

  err = clock_gettime(th_clock, &th_before);
  if (err)
  return 1;

  sleeptime.tv_sec = 0;
  sleeptime.tv_nsec = 500000000;
  nanosleep(&sleeptime, NULL);

  err = clock_gettime(th_clock, &th_after);
  if (err)
  return 1;

  err = clock_gettime(my_thread_clock, &me_after);
  if (err)
  return 1;

  err = clock_gettime(process_clock, &process_after);
  if (err)
  return 1;

  diff = process_after.tv_nsec - process_before.tv_nsec;
  printf("process: before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 process_before.tv_sec, process_before.tv_nsec,
 process_after.tv_sec, process_after.tv_nsec, diff);
  diff = th_after.tv_nsec - th_before.tv_nsec;
  printf("thread:  before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 th_before.tv_sec, th_before.tv_nsec,
 th_after.tv_sec, th_after.tv_nsec, diff);
  diff = me_after.tv_nsec - me_before.tv_nsec;
  printf("self:    before(%lu.%.9lu) after(%lu.%.9lu) diff(%lu)\n",
 me_before.tv_sec, me_before.tv_nsec,
 me_after.tv_sec, me_after.tv_nsec, diff);

  return 0;
  }

This is due to us using p->se.sum_exec_runtime in
thread_group_cputime() where we iterate the thread group and sum all
data. This does not take time since the last schedule operation (tick
or otherwise) into account. We can cure this by using
task_sched_runtime() at the cost of having to take locks.

This also means we can (and must) do away with
thread_group_sched_runtime() since the modified thread_group_cputime()
is now more accurate and would deadlock when called from
thread_group_sched_runtime().

Aside of that it makes the function safe on 32 bit systems. The old
code added t->se.sum_exec_runtime unprotected. sum_exec_runtime is a
64bit value and could be changed on another cpu at the same time.

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/1314874459.7945.22.camel@twins
Tested-by: David Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

7 years agoALSA: hda - Fix a regression of the position-buffer check
Takashi Iwai [Fri, 30 Sep 2011 06:52:26 +0000]
ALSA: hda - Fix a regression of the position-buffer check

The commit a810364a0424c297242c6c66071a42f7675a5568
    ALSA: hda - Handle -1 as invalid position, too
caused a regression on some machines that require the position-buffer
instead of LPIB, e.g. resulting in noises with mic recording with
PulseAudio.

This patch fixes the detection by delaying the test at the timing as
same as 3.0, i.e. doing the position check only when requested in
azx_position_ok().

Reported-and-tested-by: Rocko Requin <rockorequin@hotmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

7 years agoResource: fix wrong resource window calculation
Ram Pai [Thu, 22 Sep 2011 07:48:58 +0000]
Resource: fix wrong resource window calculation

__find_resource() incorrectly returns a resource window which overlaps
an existing allocated window.  This happens when the parent's
resource-window spans 0x00000000 to 0xffffffff and is entirely allocated
to all its children resource-windows.

__find_resource() looks for gaps in resource allocation among the
children resource windows.  When it encounters the last child window it
blindly tries the range next to one allocated to the last child.  Since
the last child's window ends at 0xffffffff the calculation overflows,
leading the algorithm to believe that any window in the range 0x0000000
to 0xfffffff is available for allocation.  This leads to a conflicting
window allocation.

Michal Ludvig reported this issue seen on his platform.  The following
patch fixes the problem and has been verified by Michal.  I believe this
bug has been there for ages.  It got exposed by git commit 2bbc6942273b
("PCI : ability to relocate assigned pci-resources")

Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Tested-by: Michal Ludvig <mludvig@logix.net.nz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agoMerge branch 'for-linus' of git://github.com/NewDreamNetwork/ceph-client
Linus Torvalds [Fri, 30 Sep 2011 02:58:58 +0000]
Merge branch 'for-linus' of git://github.com/NewDreamNetwork/ceph-client

* 'for-linus' of git://github.com/NewDreamNetwork/ceph-client:
  libceph: fix pg_temp mapping update
  libceph: fix pg_temp mapping calculation
  libceph: fix linger request requeuing
  libceph: fix parse options memory leak
  libceph: initialize ack_stamp to avoid unnecessary connection reset

7 years agoMerge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus
Linus Torvalds [Fri, 30 Sep 2011 02:29:45 +0000]
Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus

* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus:
  [media] omap3isp: Fix build error in ispccdc.c
  [media] uvcvideo: Fix crash when linking entities
  [media] v4l: Make sure we hold a reference to the v4l2_device before using it
  [media] v4l: Fix use-after-free case in v4l2_device_release
  [media] uvcvideo: Set alternate setting 0 on resume if the bus has been reset
  [media] OMAP_VOUT: Fix build break caused by update_mode removal in DSS2

7 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Fri, 30 Sep 2011 02:28:26 +0000]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] cio: fix cio_tpi ignoring adapter interrupts
  [S390] gmap: always up mmap_sem properly
  [S390] Do not clobber personality flags on exec

7 years agoMerge git://github.com/davem330/sparc
Linus Torvalds [Fri, 30 Sep 2011 02:24:33 +0000]
Merge git://github.com/davem330/sparc

* git://github.com/davem330/sparc:
  sparc64: Force the execute bit in OpenFirmware's translation entries.
  sparc: Make '-p' boot option meaningful again.
  sparc, exec: remove redundant addr_limit assignment
  sparc64: Future proof Niagara cpu detection.

7 years agoMerge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux
Linus Torvalds [Fri, 30 Sep 2011 02:23:30 +0000]
Merge branch 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux

* 'drm-intel-fixes' of git://people.freedesktop.org/~keithp/linux:
  drm/i915: FBC off for ironlake and older, otherwise on by default
  drm/i915: Enable SDVO hotplug interrupts for HDMI and DVI
  drm/i915: Enable dither whenever display bpc < frame buffer bpc

7 years agopowerpc: Fix device-tree matching for Apple U4 bridge
Benjamin Herrenschmidt [Thu, 29 Sep 2011 05:57:01 +0000]
powerpc: Fix device-tree matching for Apple U4 bridge

Apple Quad G5 has some oddity in it's device-tree which causes the new
generic matching code to fail to relate nodes for PCI-E devices below U4
with their respective struct pci_dev.  This breaks graphics on those
machines among others.

This fixes it using a quirk which copies the node pointer from the host
bridge for the root complex, which makes the generic code work for the
children afterward.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agobootup: move 'usermodehelper_enable()' a little earlier
wangyanqing [Thu, 29 Sep 2011 07:09:40 +0000]
bootup: move 'usermodehelper_enable()' a little earlier

Commit d5767c53535a ("bootup: move 'usermodehelper_enable()' to the end
of do_basic_setup()") moved 'usermodehelper_enable()' to end of
do_basic_setup() to after the initcalls.  But then I get failed to let
uvesafb work on my computer, and lose the splash boot.

So maybe we could start usermodehelper_enable a little early to make
some task work that need eary init with the help of user mode.

[ I would *really* prefer that initcalls not call into user space - even
  the real 'init' hasn't been execve'd yet, after all! But for uvesafb
  it really does look like we don't have much choice.

  I considered doing this when we mount the root filesystem, but
  depending on config options that is in multiple places.  We could do
  the usermode helper enable as a rootfs_initcall()..

  So I'm just using wang yanqing's trivial patch.  It's not wonderful,
  but it's simple and should work.  We should revisit this some day,
  though.      - Linus ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

7 years agocan bcm: fix incomplete tx_setup fix
Oliver Hartkopp [Thu, 29 Sep 2011 19:33:47 +0000]
can bcm: fix incomplete tx_setup fix

The commit aabdcb0b553b9c9547b1a506b34d55a764745870 ("can bcm: fix tx_setup
off-by-one errors") fixed only a part of the original problem reported by
Andre Naujoks. It turned out that the original code needed to be re-ordered
to reduce complexity and to finally fix the reported frame counting issues.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoperf tools: Fix raw sample reading
Jiri Olsa [Thu, 29 Sep 2011 15:05:08 +0000]
perf tools: Fix raw sample reading

Wrong pointer is being passed for raw data sanity checking, when parsing
sample event.

This ends up with invalid event and perf record being stuck in
__perf_session__process_events function during processing build IDs
(process_buildids function).

Following command hangs up in my setup:
./perf record -e raw_syscalls:sys_enter ls

The fix is to use proper pointer to the raw data instead of the 'u'
union.

Reviewed-by: David Ahern <dsahern@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1317308709-9474-2-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

7 years agosparc64: Force the execute bit in OpenFirmware's translation entries.
David S. Miller [Thu, 29 Sep 2011 19:18:59 +0000]
sparc64: Force the execute bit in OpenFirmware's translation entries.

In the OF 'translations' property, the template TTEs in the mappings
never specify the executable bit.  This is the case even though some
of these mappings are for OF's code segment.

Therefore, we need to force the execute bit on in every mapping.

This problem can only really trigger on Niagara/sun4v machines and the
history behind this is a little complicated.

Previous to sun4v, the sun4u TTE entries lacked a hardware execute
permission bit.  So OF didn't have to ever worry about setting
anything to handle executable pages.  Any valid TTE loaded into the
I-TLB would be respected by the chip.

But sun4v Niagara chips have a real hardware enforced executable bit
in their TTEs.  So it has to be set or else the I-TLB throws an
instruction access exception with type code 6 (protection violation).

We've been extremely fortunate to not get bitten by this in the past.

The best I can tell is that the OF's mappings for it's executable code
were mapped using permanent locked mappings on sun4v in the past.
Therefore, the fact that we didn't have the exec bit set in the OF
translations we would use did not matter in practice.

Thanks to Greg Onufer for helping me track this down.

Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoRDSRDMA: Fix cleanup of rds_iw_mr_pool
Jonathan Lallinger [Thu, 29 Sep 2011 07:58:41 +0000]
RDSRDMA: Fix cleanup of rds_iw_mr_pool

In the rds_iw_mr_pool struct the free_pinned field keeps track of
memory pinned by free MRs. While this field is incremented properly
upon allocation, it is never decremented upon unmapping. This would
cause the rds_rdma module to crash the kernel upon unloading, by
triggering the BUG_ON in the rds_iw_destroy_mr_pool function.

This change keeps track of the MRs that become unpinned, so that
free_pinned can be decremented appropriately.

Signed-off-by: Jonathan Lallinger <jonathan@ogc.us>
Signed-off-by: Steve Wise <swise@ogc.us>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agonet: Documentation: Fix type of variables
Roy.Li [Wed, 28 Sep 2011 19:51:54 +0000]
net: Documentation: Fix type of variables

Signed-off-by: Roy.Li <rongqing.li@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoibmveth: Fix oops on request_irq failure
Brian King [Wed, 28 Sep 2011 05:33:43 +0000]
ibmveth: Fix oops on request_irq failure

If request_irq fails, the ibmveth driver will overwrite
the rc and end up returning a successful rc on its open
function, resulting in an oops later when a packet gets
sent and buffers are not allocated due to the failed open.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket
Yan, Zheng [Sun, 25 Sep 2011 02:21:30 +0000]
ipv6: nullify ipv6_ac_list and ipv6_fl_list when creating new socket

ipv6_ac_list and ipv6_fl_list from listening socket are inadvertently
shared with new socket created for connection.

Signed-off-by: Zheng Yan <zheng.z.yan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agocxgb4: Fix EEH on IBM P7IOC
Divy Le Ray [Sat, 24 Sep 2011 06:11:31 +0000]
cxgb4: Fix EEH on IBM P7IOC

Fix EEH recovery on new P Series platform by
requesting fundamental reset.

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agocan bcm: fix tx_setup off-by-one errors
Oliver Hartkopp [Fri, 23 Sep 2011 08:23:47 +0000]
can bcm: fix tx_setup off-by-one errors

This patch fixes two off-by-one errors that canceled each other out.
Checking for the same condition two times in bcm_tx_timeout_tsklet() reduced
the count of frames to be sent by one. This did not show up the first time
tx_setup is invoked as an additional frame is sent due to TX_ANNONCE.
Invoking a second tx_setup on the same item led to a reduced (by 1) number of
sent frames.

Reported-by: Andre Naujoks <nautsch@gmail.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agoMAINTAINERS: tehuti: Alexander Indenbaum's address bounces
Ian Campbell [Wed, 21 Sep 2011 22:08:26 +0000]
MAINTAINERS: tehuti: Alexander Indenbaum's address bounces

I got:
Generating server: Tehuti.onmicrosoft.com

baum@tehutinetworks.net
#< #5.1.1 smtp;550 5.1.1 RESOLVER.ADR.RecipNotFound; not found> #SMTP#

Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Alexander Indenbaum <baum@tehutinetworks.net>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: netdev@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

7 years agodp83640: reduce driver noise
Richard Cochran [Tue, 20 Sep 2011 01:25:42 +0000]
dp83640: reduce driver noise

The driver has two warning messages that might be triggered
by normal use cases. When they appear, the messages give the
impression of a never ending series of errors.

This commit changes them to debug messages instead.

Signed-off-by: Richard Cochran <richard.cochran@omicron.at>
Signed-off-by: David S. Miller <davem@davemloft.net>