13 years ago[PATCH] USB: add new pl2303 device ids
Denis MONTERRAT [Thu, 19 Jan 2006 13:52:38 +0000]
[PATCH] USB: add new pl2303 device ids

Signed-off-by: FALIPOU F Developer <fred.falipou@free.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: pl2303: Added support for CA-42 clone cable
Martin Gingras [Mon, 9 Jan 2006 17:35:41 +0000]
[PATCH] USB: pl2303: Added support for CA-42 clone cable

Added support for CA-42 clone cable (www.ca-42.com)

Signed-off-by: Martin Gingras <martin.gingras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: touchkitusb.c (eGalax driver) fix
Juergen Schindele [Mon, 9 Jan 2006 07:51:48 +0000]
[PATCH] USB: touchkitusb.c (eGalax driver) fix

This patch corrects the URB initialisation for transfers
like this is done in other drivers too.
Without this patch no data was transmitted on a PXA270 OHCI
platform. May apply to others too.

Signed-off-by: Juergen Schindele <schindele@nentec.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: asix - Add device IDs for 0G0 Cable Ethernet
David Hollis [Thu, 5 Jan 2006 19:39:49 +0000]
[PATCH] USB: asix - Add device IDs for 0G0 Cable Ethernet

Add device IDs for the 0G0 Cable Ethernet device as reported by
Charles Lepple <clepple@gmail.com>.

Signed-off-by: David Hollis <dhollis@davehollis.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: SN9C10x driver updates and bugfixes
Luca Risolia [Thu, 5 Jan 2006 18:14:04 +0000]
[PATCH] USB: SN9C10x driver updates and bugfixes

SN9C10x driver updates and bugfixes.

Changes: + new, - removed, * cleanup, @ bugfix:

@ fix poll()
@ Remove bad get_ctrl()'s
* Reduce ioctl stack usage
* Remove final ";" from some macro definitions
* Better support for SN9C103
+ Add sn9c102_write_regs()
+ Add 0x0c45/0x602d to the list of SN9C10x based devices
+ Add support for OV7630 image sensors
+ Provide support for the built-in microphone interface of the SN9C103
+ Documentation updates
+ Add 0x0c45/0x602e to the list of SN9C10x based devices

Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: usb-storage support for SONY DSC-T5 still camera
Alexandre Duret-Lutz [Tue, 27 Dec 2005 07:04:24 +0000]
[PATCH] USB: usb-storage support for SONY DSC-T5 still camera

I've been offered a nice Sony DSC-T5 digital camera, with a USB connection.
Unfortunately it is not recognized by Linux 2.6.14.4's usb-storage.

With the following change I'm able to mount and read my pictures:

Signed-off-by: Phil Dibowitz <phil@ipom.com>

13 years ago[PATCH] USB: fix oops in acm disconnect
Oliver Neukum [Sun, 8 Jan 2006 11:39:13 +0000]
[PATCH] USB: fix oops in acm disconnect

this fixes an oops with disconnection in acm.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: cleanup of usblp
Oliver Neukum [Sat, 7 Jan 2006 20:35:20 +0000]
[PATCH] USB: cleanup of usblp

this fixes
-potential hang by disconnecting through usbfs
-kzalloc
-general cleanup
-micro optimisation in interrupt handlers

It compiles and I am printing.

Signed-off-by: Oliver Neukum <oliver@neukum.name>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: usb-storage: Add support for Rio Karma
Matthew Dharm [Sat, 31 Dec 2005 03:06:53 +0000]
[PATCH] USB: usb-storage: Add support for Rio Karma

This patch from Bob Copeland adds support for the Rio Karma portable
digital audio player to the usb-storage driver.  The only thing needed to
support this device is a one-time (per plugin) init command which is sent
to the device.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Matthew Dharm <mdharm-usb@one-eyed-alien.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] drivers/usb/input/yealink.c: Cleanup device matching code
Henk [Fri, 30 Dec 2005 18:41:11 +0000]
[PATCH] drivers/usb/input/yealink.c: Cleanup device matching code

This should fix things mentioned below:

"I was curious why my firewall was loading a 'phone driver'.
It turns out that the probing in the yealink driver is
a little too assuming..

static struct usb_device_id usb_table [] = {
    { USB_INTERFACE_INFO(USB_CLASS_HID, 0, 0) },
    { }
};

So it picked up my UPS, and loaded the driver.
Whilst no harm came, because it later checks the vendor/product IDs,
this driver should probably be rewritten to only probe
for the device IDs it actually knows about.

Dave"

Signed-off-by: Henk Vergonet <henk.vergonet@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD cameras
Rui Santos [Mon, 9 Jan 2006 13:12:40 +0000]
[PATCH] USB: ftdi: Two new ATIK based USB astronomical CCD cameras

Documentation: Specify grayscale specification on ATIK-ATK16
   and ATIK-ATK16HR comments.
New: Add ProductID and VendorID for devices ATIK-ATK16C and
   ATIK-ATK16HRC. These devices are also USB Astronomical CCD
   cameras that work through an FTDI 245BM chip, share the
   same base hardware but, it has a colour CCD chip instead
   of a grayscale one.

Signed-off-by: Rui Santos <rsantos@grupopie.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2
Wouter Paesen [Tue, 3 Jan 2006 13:30:31 +0000]
[PATCH] USB: ftdi_sio: new PID for PCDJ DAC2

The attached patch adds a new PID for the ftdi_sio driver.  It will
enable support for PC-DJ's DAC-2 controller module
(more information on http://www.pcdjhardware.com/DAC2.asp)

Signed-off-by: Wouter Paesen <wouter@kangaroot.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: ftdi_sio: new IDs for Westrex devices
Ian Abbott [Mon, 9 Jan 2006 17:11:40 +0000]
[PATCH] USB: ftdi_sio: new IDs for Westrex devices

This patch adds two new devices to the ftdi_sio driver's device ID
table.  The device IDs were supplied by Cory Lee to support two POS
printers made by Westrex International (Model 777 and Model 8900F).

Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.h
Louis Nyffenegger [Thu, 5 Jan 2006 16:20:37 +0000]
[PATCH] USB: new id for ftdi_sio.c and ftdi_sio.h

this patch includes the Vendor Id for a optic fiber to USB device named
TTUSB from thought Technology. It's just add the vendor Id to
ftdi_sio.h and add the Vendor ID and model Id to table_combined.

Signed-off-by: Louis Nyffenegger <louis.nyffenegger@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: ub 05 Bulk reset
Pete Zaitcev [Thu, 5 Jan 2006 08:26:30 +0000]
[PATCH] USB: ub 05 Bulk reset

For crying out loud, they have devices which do not like port resets.
So, do what usb-storage does and try both bulk and port resets.
We start with a port reset (which usb-storage does at the end of transport),
then do a Bulk reset, then a port reset again. This seems to work for me.

The code is getting dirtier and dirtier here, but I swear that I'll
do something about it (see those two new XXX). Honest.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: ub 04 Loss of timer and a hang
Pete Zaitcev [Thu, 5 Jan 2006 08:14:02 +0000]
[PATCH] USB: ub 04 Loss of timer and a hang

If SCSI commands are submitted while other commands are still processed,
the dispatch loop turns, and we stop the work_timer. Then, if URB fails
to complete, ub hangs until the device is unplugged.

This does not happen often, becase we only allow one SCSI command per
block device, but does happen (on multi-LUN devices, for example).

The fix is to stop timer only when we actually going to change the state.

The nicest code would be to have the timer stopped in URB callback, but
this is impossible, because it can be called from inside a timer, through
the urb_unlink. Then we get BUG in timer.c:cascade(). So, we do it a
little dirtier.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: ub 03 Oops with CFQ
Pete Zaitcev [Wed, 28 Dec 2005 22:22:17 +0000]
[PATCH] USB: ub 03 Oops with CFQ

The blk_cleanup_queue does not necesserily destroy the queue. When we
destroy the corresponding ub_dev, it may leave the queue spinlock pointer
dangling.

This patch moves spinlocks from ub_dev to static memory. The locking
scheme is not changed. These spinlocks are still separate from the ub_lock.

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: fix ehci early handoff issues warning
Andrew Morton [Wed, 25 Jan 2006 01:42:24 +0000]
[PATCH] USB: fix ehci early handoff issues warning

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] USB: fix EHCI early handoff issues
David Brownell [Tue, 24 Jan 2006 15:15:30 +0000]
[PATCH] USB: fix EHCI early handoff issues

This moves the previously widely-used ehci-pci.c BIOS handoff
code into the pci-quirks.c file, replacing the less widely used
"early handoff" version that seems to cause problems lately.

One notable change:  the "early handoff" version always enabled
an SMI IRQ ... and did so even if the pre-Linux code said it was
not using EHCI (and not expecting EHCI SMIs).  Looks like a goof
in a workaround for some unknown BIOS version.

This merged version only forcibly enables those IRQs when pre-Linux
code says it's using EHCI.  And now it always forces them off "just
in case".

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

13 years ago[PATCH] "Fix uidhash_lock <-> RXU deadlock" fix
Andrew Morton [Wed, 1 Feb 2006 00:34:26 +0000]
[PATCH] "Fix uidhash_lock <-> RXU deadlock" fix

I get storms of warnings from local_bh_enable().  Better-tested patches,
please.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/x86
Linus Torvalds [Wed, 1 Feb 2006 00:21:44 +0000]
Merge /pub/scm/linux/kernel/git/davej/x86

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
Linus Torvalds [Wed, 1 Feb 2006 00:20:55 +0000]
Merge /pub/scm/linux/kernel/git/davej/agpgart

13 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
Linus Torvalds [Tue, 31 Jan 2006 23:22:29 +0000]
Merge branch 'for-linus' of /linux/kernel/git/roland/infiniband

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Tue, 31 Jan 2006 23:09:20 +0000]
Merge /pub/scm/linux/kernel/git/davej/cpufreq

14 years agoMerge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
Linus Torvalds [Tue, 31 Jan 2006 22:14:02 +0000]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Tue, 31 Jan 2006 21:12:41 +0000]
Merge /linux/kernel/git/jejb/scsi-rc-fixes-2.6

14 years agoFix ipv4/igmp.c compile with gcc-4 and IP_MULTICAST
Linus Torvalds [Tue, 31 Jan 2006 21:11:41 +0000]
Fix ipv4/igmp.c compile with gcc-4 and IP_MULTICAST

Modern versions of gcc do not like case statements at the end of a block
statement: you need at least an empty statement.  Using just a "break;"
is preferred for visual style.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[SCSI] ServeRAID: prevent seeing DADSI devices
Jack Hammer [Tue, 31 Jan 2006 18:17:55 +0000]
[SCSI] ServeRAID: prevent seeing DADSI devices

A critical thing the ServeRAID driver MUST do is hide the physical DASDI
devices from the OS. It does this by intercepting the INQUIRY commands.

In recent 2.6.15 testing, I discovered this to be failing.

The cause was the driver assuming that the INQUIRY response data was in a
simple single buffer, when it was actually a 1 element scatter gather list.

This patch makes ips always look at the correct data when examining an
INQUIRY response.

Signed-off-by: Jack Hammer <jack_hammer@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: add message sanity check
Moore, Eric [Wed, 18 Jan 2006 00:06:29 +0000]
[SCSI] fusion: add message sanity check

This adds a sanity check in the interrupt routine
insures incoming message frames are a valid
message frames.

The code for setting 0xdeadbeaf in the freed message
frames, apparently was already submitted by Christoph
in previous patch submission.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: unloading the driver - only set asyn narrow for configured devices
Moore, Eric [Wed, 18 Jan 2006 00:06:26 +0000]
[SCSI] fusion: unloading the driver - only set asyn narrow for configured devices

This patch inhibits sending spi negotiation parameters
for non-configured devices from the slave_destroy function.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: unloading the driver results in panic - fix
Moore, Eric [Wed, 18 Jan 2006 00:06:23 +0000]
[SCSI] fusion: unloading the driver results in panic - fix

The ioc->alt_ioc->alt_ioc pointer is not getting cleared
during driver unload time.   This dangling pointer
can result in panic in certain circumstances, such
as error recovery, or firmware download in flashless
environments. This only impacts dual functions controllers,
such as 1030. Please apply.

This patch also includes a small cosmetic name change
for mpt_spi_log_info.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] mptsas: don't complain on bogus slave_alloc calls
Christoph Hellwig [Mon, 30 Jan 2006 18:00:43 +0000]
[SCSI] mptsas: don't complain on bogus slave_alloc calls

When people use the userspace scanning facilities on SAS hardware the
LLDD gets bogus slave_alloc calls.  Just fail those gracefully instead
of printing a warning in mptsas and another one in the midlayer.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: add task managment response code info
Moore, Eric [Tue, 17 Jan 2006 01:53:26 +0000]
[SCSI] fusion: add task managment response code info

Adding verbose message returned from firmware
when a task mangment request fails.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: add MSI support
Christoph Hellwig [Tue, 17 Jan 2006 13:44:29 +0000]
[SCSI] fusion: add MSI support

On Mon, Jan 16, 2006 at 06:53:24PM -0700, Moore, Eric wrote:
> Adding MSI support, and command line for enabling
> it.  By default, the command line option has MSI disabled.

mpt_msi_enable is initialized to 0 implicitly, no need to do that.  Also
replace if (mpt_msi_enable == 1) tests with just if (mpt_msi_enable).

Updated patch below:

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: overrun tape fix
Moore, Eric [Tue, 17 Jan 2006 01:53:21 +0000]
[SCSI] fusion: overrun tape fix

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: add verbose messages for RAID actions
Moore, Eric [Tue, 17 Jan 2006 01:53:19 +0000]
[SCSI] fusion: add verbose messages for RAID actions

A customer request to send raid asyn actions
from firmware to the event syslog.  This shows
when raid volumes go degraded, or complete resync,
or volumes created/deleted, etc.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytes
Moore, Eric [Tue, 17 Jan 2006 01:53:16 +0000]
[SCSI] fusion: increase reply frame size from 0x40 to 0x50 bytes

Increasing the reply frame size by 16 bytes, to
be in sync with the other fusion drivers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spi
Christoph Hellwig [Tue, 17 Jan 2006 13:43:14 +0000]
[SCSI] fusion: setting timeouts in eh threads appropiatley for fc/sas/spi

On Mon, Jan 16, 2006 at 06:53:13PM -0700, Moore, Eric wrote:
> The task managment request timeout in the eh threads was set
> for U320 timing, which is between 2-5 seconds.
> This is too small for FC and SAS.
> According to the firmware engineers, Fibre needs to be 40 seconds
> and SAS needs to be 10 seconds.

The timeout selection should probably be done in a little helper instead
of duplicated in a few places.  Updated patch below.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: mptsas, increase discovery timout to 300 seconds
Moore, Eric [Tue, 17 Jan 2006 01:53:11 +0000]
[SCSI] fusion: mptsas, increase discovery timout to 300 seconds

Increase the port enable timeout only for SAS from 30 to 300 seconds.
A customer request for the handling large topologies.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: spi bus reset when driver loads
Moore, Eric [Tue, 17 Jan 2006 01:53:06 +0000]
[SCSI] fusion: spi bus reset when driver loads

This patch is for spi.  This issues bus reset when driver
loads. Handling cases when initator has negotiated for packetized,
and target negotiated for non-packetized; effectly this bus reset
is getting both target and initiator on the same sheet of music.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] aic79xx: Fix timer handling
Hannes Reinecke [Mon, 30 Jan 2006 15:10:31 +0000]
[SCSI] aic79xx: Fix timer handling

Fix the timer handling in aic79xx to use the SCSI-ML provided handling
instead of implementing our own.
It also fixes a deadlock in the command recovery code.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] aic7xxx: update documentation
Hannes Reinecke [Tue, 24 Jan 2006 09:45:35 +0000]
[SCSI] aic7xxx: update documentation

This patch updates the documentation for aic7xxx and aic79xx with fixes
from the adaptec driver.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] aic79xx: SLOWCRC fix
Hannes Reinecke [Tue, 24 Jan 2006 09:44:38 +0000]
[SCSI] aic79xx: SLOWCRC fix

This patch introduces the SLOWCRC handling for certain buggy chipsets.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] aic79xx: sequencer fixes
Hannes Reinecke [Tue, 24 Jan 2006 09:43:26 +0000]
[SCSI] aic79xx: sequencer fixes

This patch updates the aic79xx sequencer with latest fixes from adaptec.
The sequencer code now corresponds with adaptec version 2.0.15.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] aic7xxx: Update aicasm
Hannes Reinecke [Tue, 24 Jan 2006 09:41:45 +0000]
[SCSI] aic7xxx: Update aicasm

This patchset updates aicasm code with the latest fixes from adaptec.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: fix compile
James Bottomley [Sun, 29 Jan 2006 18:10:24 +0000]
[SCSI] fusion: fix compile

The prior fusion patches moved an invocation of a function,
mptscsih_TMHandler(), static to mptscsih.c into mptsas.c

Make the function unstatic, move the header to mptscsih.h and export it.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: bump version
Moore, Eric [Thu, 26 Jan 2006 01:05:21 +0000]
[SCSI] fusion: bump version

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: FC rport code fixes
Michael Reed [Thu, 26 Jan 2006 01:05:18 +0000]
[SCSI] fusion: FC rport code fixes

This fix's problems with recent fc submission regarding
i/o being redirected to the wrong target.

Signed-off-by: Michael Reed <mdr@sgi.com>
Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: move sas persistent event handling over to the mptsas module
Moore, Eric [Thu, 26 Jan 2006 01:05:15 +0000]
[SCSI] fusion: move sas persistent event handling over to the mptsas module

This moves code intented for SAS from
the generic mptscsih module over to the
mptsas module.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: target reset when drive is being removed
Moore, Eric [Thu, 26 Jan 2006 01:05:12 +0000]
[SCSI] fusion: target reset when drive is being removed

The issuing of the target reset
used in device hot removal case so the
firmware queue is flushed out off outstanding
commands.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] fusion: add support for raid hot add/del support
Moore, Eric [Thu, 26 Jan 2006 23:20:06 +0000]
[SCSI] fusion: add support for raid hot add/del support

RAID event support.

This will hot add and remove raid volumes
when managment application creates and
deletes the volumes.  The driver is basically
responding to firmware asyn events, and reporting
the changes to the above layers.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] scsi_transport_sas.c: display port identifier
Moore, Eric [Thu, 26 Jan 2006 23:20:02 +0000]
[SCSI] scsi_transport_sas.c: display port identifier

This patch displays the port identifier on
the folder attribute; located in the middle digit.

/sys/class/sas_rphy/rphy-%x:%x:%x

The port identifier is basically the unique identifier
for each sas domain.

Signed-off-by: Eric Moore <Eric.Moore@lsil.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-serial
Linus Torvalds [Tue, 31 Jan 2006 19:31:54 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-serial

14 years agoMerge master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 31 Jan 2006 19:31:02 +0000]
Merge master.kernel.org:/home/rmk/linux-2.6-arm

14 years ago[PATCH] rcu_torture_lock deadlock fix
Ingo Molnar [Wed, 25 Jan 2006 18:50:12 +0000]
[PATCH] rcu_torture_lock deadlock fix

rcu_torture_lock is used in a softirq-unsafe manner, but it is also
taken by rcu_torture_cb(), which may execute in softirq-context,
resulting in potential deadlocks.

The fix is to acquire rcu_torture_lock in a softirq-safe manner.  With
this fix applied, the rcu-torture code passes validation.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] fix deadlock in drivers/pci/msi.c
Ingo Molnar [Thu, 26 Jan 2006 00:42:11 +0000]
[PATCH] fix deadlock in drivers/pci/msi.c

The lock validator caught another one: drivers/pci/msi.c is accessing
&irq_desc[i].lock with interrupts enabled (!).

The fix is to disable interrupts properly.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] fix uidhash_lock <-> RCU deadlock
Ingo Molnar [Wed, 25 Jan 2006 14:23:07 +0000]
[PATCH] fix uidhash_lock <-> RCU deadlock

RCU task-struct freeing can call free_uid(), which is taking
uidhash_lock - while other users of uidhash_lock are softirq-unsafe.

The fix is to always take the uidhash_spinlock in a softirq-safe manner.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Paul E. McKenney <paulmck@us.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years agoMerge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Tue, 31 Jan 2006 19:22:40 +0000]
Merge branch 'for-linus' of git://brick.kernel.dk/data/git/linux-2.6-block

14 years agoMerge branch 'upstream-fixes' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Tue, 31 Jan 2006 18:29:35 +0000]
Merge branch 'upstream-fixes' of /linux/kernel/git/jgarzik/netdev-2.6

14 years ago[PATCH] Fix boot-time slowdown for measure_migration_cost
Ingo Molnar [Mon, 30 Jan 2006 19:24:38 +0000]
[PATCH] Fix boot-time slowdown for measure_migration_cost

This reduces the amount of time the migration cost calculations cost
during bootup. Based on numbers by Tony Luck <tony.luck@intel.com>.

Signed-off-by: Ingo Molnar <mingo@elte.hu>

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Tue, 31 Jan 2006 18:21:13 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

14 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Tue, 31 Jan 2006 18:20:49 +0000]
Merge /pub/scm/linux/kernel/git/davem/sparc-2.6

14 years agoDon't try to "validate" a non-existing timeval.
Linus Torvalds [Tue, 31 Jan 2006 18:16:55 +0000]
Don't try to "validate" a non-existing timeval.

settime() with a NULL timeval is silly but legal.

Noticed by Dave Jones <davej@redhat.com>

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

14 years ago[PATCH] Clarify help text of SKGE/SK98LIN/SKY2
Daniel Drake [Sat, 21 Jan 2006 19:35:34 +0000]
[PATCH] Clarify help text of SKGE/SK98LIN/SKY2

Some users have commented that it is unclear which driver they should be
using for their Marvell/SysKonnect network adapter, and which ones
are/aren't interchangable.

This patch attempts to reduce the confusion.

Signed-off-by: Daniel Drake <dsd@gentoo.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linvil...
Jeff Garzik [Tue, 31 Jan 2006 16:50:11 +0000]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6

14 years ago[BLOCK] A few kerneldoc fixups
Jens Axboe [Tue, 31 Jan 2006 14:24:34 +0000]
[BLOCK] A few kerneldoc fixups

Signed-off-by: Jens Axboe <axboe@suse.de>

14 years ago[TCP] H-TCP: Fix accounting
Baruch Even [Tue, 31 Jan 2006 04:54:39 +0000]
[TCP] H-TCP: Fix accounting

This fixes the accounting in H-TCP, the ccount variable is also
adjusted a few lines above this one.

This line was not supposed to be there and wasn't there in the patches
originally submitted, the four patches submitted were merged to one
and in that merge the bug was introduced.

Signed-Off-By: Baruch Even <baruch@ev-en.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[IPV4] igmp: remove pointless printk
Dave Jones [Tue, 31 Jan 2006 04:27:17 +0000]
[IPV4] igmp: remove pointless printk

This is easily triggerable by sending bogus packets,
allowing a malicious user to flood remote logs.

Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[SPARC]: Fix compile failures in math-emu.
David S. Miller [Tue, 31 Jan 2006 00:46:24 +0000]
[SPARC]: Fix compile failures in math-emu.

Kill debugging default switch cases in do_one_mathemu().
That case is handled properly already and gcc hates
the empty statement that results when the debug code is
disabled.

Pointed out by kaffe.

Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[SCTP]: heartbeats exceed maximum retransmssion limit
Vlad Yasevich [Tue, 31 Jan 2006 00:00:40 +0000]
[SCTP]: heartbeats exceed maximum retransmssion limit

The number of HEARTBEAT chunks that an association may transmit is
limited by Association.Max.Retrans count; however, the code allows
us to send one extra heartbeat.

This patch limits the number of heartbeats to the maximum count.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[SCTP]: correct the number of INIT retransmissions
Vlad Yasevich [Mon, 30 Jan 2006 23:59:54 +0000]
[SCTP]: correct the number of INIT retransmissions

We currently count the initial INIT/COOKIE_ECHO chunk toward the
retransmit count and thus sends a total of sctp_max_retrans_init chunks.
The correct behavior is to retransmit the chunk sctp_max_retrans_init in
addition to sending the original.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[PATCH] PCMCIA=m, HOSTAP_CS=y is not a legal configuration
Adrian Bunk [Mon, 30 Jan 2006 18:23:17 +0000]
[PATCH] PCMCIA=m, HOSTAP_CS=y is not a legal configuration

CONFIG_PCMCIA=m, CONFIG_HOSTAP_CS=y doesn't compile.

Reported by "Gabriel C." <crazy@pimpmylinux.org>.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] Typo corrections for ieee80211
Larry Finger [Mon, 30 Jan 2006 15:42:24 +0000]
[PATCH] Typo corrections for ieee80211

This patch, generated against 2.6.16-rc1-git4, corrects two typographical
errors in ieee80211_rx.c and adds the facility name to a bare printk.

Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net>

Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] ipw2200: Fix a variable referenced after kfree() bug
Zhu Yi [Tue, 24 Jan 2006 08:37:41 +0000]
[PATCH] ipw2200: Fix a variable referenced after kfree() bug

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] ipw2200: Fix sw_reset doesn't clear the static essid problem
Zhu Yi [Tue, 24 Jan 2006 08:36:31 +0000]
[PATCH] ipw2200: Fix sw_reset doesn't clear the static essid problem

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] ipw2200: Fix "iwspy ethx off" causes kernel panic
Zhu Yi [Tue, 24 Jan 2006 08:36:22 +0000]
[PATCH] ipw2200: Fix "iwspy ethx off" causes kernel panic

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] ipw2100: Fix setting txpower failed problem
Zhu Yi [Tue, 24 Jan 2006 05:49:32 +0000]
[PATCH] ipw2100: Fix setting txpower failed problem

The ipw2100 driver misunderstood the parameter of txpower.
Tx Power off means turn off the radio, but the driver interpret it as
"can't set txpower". So when getting the txpower, it sets disabled=1 to
the iwconifg tool in managed mode. And the tool will display "Tx Power off"
when disabled=1.

Now, in managed mode, iwconfig will not show "TX Power" if the radio is not
switched off. It will only display "Tx Power off" only if the radio is killed.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] ipw2100: Fix a gcc compile warning
Zhu Yi [Tue, 24 Jan 2006 05:49:26 +0000]
[PATCH] ipw2100: Fix a gcc compile warning

drivers/net/wireless/ipw2100.c:2236: warning: `ipw2100_match_buf' defined
but not used

Cc: Yi Zhu <yi.zhu@intel.com>
Cc: James Ketrenos <jketreno@linux.intel.com>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[LIBATA] Blacklist certain Maxtor firmware revisions for FUA support
Jens Axboe [Mon, 30 Jan 2006 15:09:35 +0000]
[LIBATA] Blacklist certain Maxtor firmware revisions for FUA support

It looks like they are either discarding or corrupting data when the FUA
command is used, bad.

Signed-off-by: Jens Axboe <axboe@suse.de>

14 years ago[SPARC64]: Kill compat_sys_clock_settime sign extension stub.
David S. Miller [Mon, 30 Jan 2006 09:31:09 +0000]
[SPARC64]: Kill compat_sys_clock_settime sign extension stub.

It's wrong and totally unneeded.

Signed-off-by: David S. Miller <davem@davemloft.net>

14 years ago[SCSI] megaraid_sas: new template defined to represent each type of controllers
Sumant Patro [Wed, 25 Jan 2006 20:02:40 +0000]
[SCSI] megaraid_sas: new template defined to represent each type of controllers

This patch defines a new template to represent each type of
controllers (identified by the processor used). The template has
members that is set with appropriate values during driver
initialisation. This change is done to support new controllers with
minimal change to existing code. In future, for a new controller
support, a template will be declared and its members initialised
appropriately.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>

Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years ago[SCSI] megaraid_sas: cleanup queue command path
Sumant Patro [Wed, 25 Jan 2006 19:53:25 +0000]
[SCSI] megaraid_sas: cleanup queue command path

This patch (originally submitted by Christoph Hellwig) removes code
duplication in megasas_build_cmd.  It also defines
MEGASAS_IOC_FIRMWARE32 to allow 64 bit compiled applications to work.

Signed-off-by: Sumant Patro <Sumant.Patro@lsil.com>

Rejections fixed and
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

14 years agoMerge branch 'upstream-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/linvil...
Jeff Garzik [Sat, 28 Jan 2006 21:06:30 +0000]
Merge branch 'upstream-fixes' of git://git./linux/kernel/git/linville/wireless-2.6

14 years ago[ARM] 3289/1: Enable the LCD support for Integrator/CP
Catalin Marinas [Sat, 28 Jan 2006 20:54:50 +0000]
[ARM] 3289/1: Enable the LCD support for Integrator/CP

Patch from Catalin Marinas

The LCD displays were no longer working with Integrator/CP after some
changes to the setup code. This patch re-enables them.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

14 years ago[PATCH] ieee80211: Fix A band min and max channel definitions
Zhu Yi [Thu, 19 Jan 2006 08:21:19 +0000]
[PATCH] ieee80211: Fix A band min and max channel definitions

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] ieee80211: Fix iwlist scan can only show about 20 APs
Zhu Yi [Thu, 19 Jan 2006 08:20:59 +0000]
[PATCH] ieee80211: Fix iwlist scan can only show about 20 APs

Limit the amount of output given to iwlist scan.

Signed-off-by: Hong Liu <hong.liu@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] ieee80211: Fix problem with not decrypting broadcast packets
Zhu Yi [Thu, 19 Jan 2006 08:20:42 +0000]
[PATCH] ieee80211: Fix problem with not decrypting broadcast packets

The code for pulling the key to use for decrypt was correctly using
the host_mc_decrypt flag.  The code that actually decrypted,
however, was based on host_decrypt.  This patch changes this
behavior.

Signed-off-by: Etay Bogner <etay.bogner@gmail.com>
Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[PATCH] orinoco_cs: tweak Vcc debugging messages
Valdis.Kletnieks@vt.edu [Thu, 19 Jan 2006 07:07:47 +0000]
[PATCH] orinoco_cs: tweak Vcc debugging messages

The current orinoco_cs.c can issue the exact same error message for
2 different tests that can fail.  Alter them so we can tell which
one of the two failed.

Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

14 years ago[CPUFREQ] Get rid of userspace policy struct, make userspace gov _PPC safe.
Thomas Renninger [Fri, 27 Jan 2006 15:15:26 +0000]
[CPUFREQ] Get rid of userspace policy struct, make userspace gov _PPC safe.

Userspace governor need not to hold it's own cpufreq_policy,
better make use of the global core policy.
Also fixes a bug in case of frequency changes via _PPC.
Old min/max values have wrongly been passed to __cpufreq_driver_target()
(kind of buffered) and when max freq was available again, only the old
max(normally lowest freq) was still active.

Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

 cpufreq_userspace.c |   53 +++++++++++++++++++++++++++-------------------------
 1 files changed, 28 insertions(+), 25 deletions(-)

14 years ago[PATCH] mv643xx_eth: Fix for building as a module
Dale Farnsworth [Fri, 27 Jan 2006 08:05:51 +0000]
[PATCH] mv643xx_eth: Fix for building as a module

Enable mv643xx_eth driver to work when built as a module on
mv64x60-based embedded systems.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] mv643xx_eth: Whitespace cleanup
Dale Farnsworth [Fri, 27 Jan 2006 08:04:43 +0000]
[PATCH] mv643xx_eth: Whitespace cleanup

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] mv643xx_eth: Update dev->last_rx on packet receive
Paolo Galtieri [Fri, 27 Jan 2006 08:03:38 +0000]
[PATCH] mv643xx_eth: Update dev->last_rx on packet receive

Update dev->last_rx on packet receive

This fix corrects errors seen during configuration of the bonding driver.

Signed-off-by: Paolo Galtieri <pgaltieri@mvista.com>
Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] mv643xx_eth: Fix spinlock recursion bug
Dale Farnsworth [Fri, 27 Jan 2006 08:02:05 +0000]
[PATCH] mv643xx_eth: Fix spinlock recursion bug

This patch eliminates a spinlock recursion bug introduced recently.
Since eth_port_send() is always called with the lock held, we simply
remove the locking inside the function itself.

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[X86] Add new Intel cache descriptors.
Dave Jones [Fri, 27 Jan 2006 06:40:40 +0000]
[X86] Add new Intel cache descriptors.

From http://www.intel.com/design/xeon/applnots/24161830.pdf

16MB of 16-way assoc 64 byte per cacheline L3 cache anyone? Yum.

Signed-off-by: Dave Jones <davej@redhat.com>

14 years ago[PATCH] s2io: scatter-gather fix
Ananda Raju [Thu, 19 Jan 2006 19:11:54 +0000]
[PATCH] s2io: scatter-gather fix

There is a problem with fragmented skb in s2io driver version 2.0.9.4
available in 2.6.16-rc1 kernel. The adapter will fail to transmit if
any scatter-gather skb arrives.  This patch provides fix for the above
described problem.

Signed-off-by: Ananda Raju <ananda.raju@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] b44: fix laptop carrier detect
Stephen Hemminger [Sat, 21 Jan 2006 05:13:17 +0000]
[PATCH] b44: fix laptop carrier detect

On my laptop, the b44 device is created and the carrier state defaults
to ON when created by alloc_etherdev. This means tools like NetworkManager
see the carrier as On and try and bring the device up.  The correct thing
to do is mark the carrier as Off when device is created.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] acenic: fix checking of read_eeprom_byte() return values
Eric Sesterhenn [Fri, 20 Jan 2006 20:32:56 +0000]
[PATCH] acenic: fix checking of read_eeprom_byte() return values

tmp in ace_init is u32 thus rendering read_eeprom_byte() return values
checks useless.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[PATCH] bonding: fix ->get_settings error checking
Eric Sesterhenn [Fri, 20 Jan 2006 20:30:01 +0000]
[PATCH] bonding: fix ->get_settings error checking

Since get_settings() returns a signed int and it gets checked
for < 0 to catch an error, res should be a signed int too.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

14 years ago[IA64-SGI] Add PROM feature set for device flush list
Prarit Bhargava [Wed, 25 Jan 2006 23:51:14 +0000]
[IA64-SGI] Add PROM feature set for device flush list

Introduce PRF_DEVICE_FLUSH_LIST flag for older PROMs.

Signed-off-by: Prarit Bhargava <prarit@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>

14 years ago[SCSI] Prevent scsi_execute_async from guessing cdb length
brking@us.ibm.com [Mon, 23 Jan 2006 21:03:22 +0000]
[SCSI] Prevent scsi_execute_async from guessing cdb length

When the scsi_execute_async interface was added it ended up reducing
the flexibility of userspace to send arbitrary scsi commands through
sg using SG_IO. The SG_IO interface allows userspace to specify the
CDB length. This is now ignored in scsi_execute_async and it is
guessed using the COMMAND_SIZE macro, which is not always correct,
particularly for vendor specific commands. This patch adds a cmd_len
parameter to the scsi_execute_async interface to allow the caller
to specify the length of the CDB.

Signed-off-by: Brian King <brking@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>