8 years agoKVM: fix irqfd assign/deassign race
Michael S. Tsirkin [Sun, 19 Sep 2010 17:02:31 +0000]
KVM: fix irqfd assign/deassign race

I think I see the following (theoretical) race:

During irqfd assign, we drop irqfds lock before we
schedule inject work. Therefore, deassign running
on another CPU could cause shutdown and flush to run
before inject, causing user after free in inject.

A simple fix it to schedule inject under the lock.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Gregory Haskins <ghaskins@novell.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Wed, 22 Sep 2010 19:09:46 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Prevent no-handler signal syscall restart recursion.
  sparc: Don't mask signal when we can't setup signal frame.
  sparc64: Fix race in signal instruction flushing.
  sparc64: Support RAW perf events.

8 years agopowerpc: fix double syscall restarts
Al Viro [Mon, 20 Sep 2010 20:48:57 +0000]
powerpc: fix double syscall restarts

Make sigreturn zero regs->trap, make do_signal() do the same on all
paths.  As it is, signal interrupting e.g. read() from fd 512 (==
ERESTARTSYS) with another signal getting unblocked when the first
handler finishes will lead to restart one insn earlier than it ought
to.  Same for multiple signals with in-kernel handlers interrupting
that sucker at the same time.  Same for multiple signals of any kind
interrupting that sucker on 64bit...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
Linus Torvalds [Wed, 22 Sep 2010 16:12:37 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  bdi: Fix warnings in __mark_inode_dirty for /dev/zero and friends
  char: Mark /dev/zero and /dev/kmem as not capable of writeback
  bdi: Initialize noop_backing_dev_info properly
  cfq-iosched: fix a kernel OOPs when usb key is inserted
  block: fix blk_rq_map_kern bio direction flag
  cciss: freeing uninitialized data on error path

8 years agobdi: Fix warnings in __mark_inode_dirty for /dev/zero and friends
Jan Kara [Tue, 21 Sep 2010 09:51:01 +0000]
bdi: Fix warnings in __mark_inode_dirty for /dev/zero and friends

Inodes of devices such as /dev/zero can get dirty for example via
utime(2) syscall or due to atime update. Backing device of such inodes
(zero_bdi, etc.) is however unable to handle dirty inodes and thus
__mark_inode_dirty complains.  In fact, inode should be rather dirtied
against backing device of the filesystem holding it. This is generally a
good rule except for filesystems such as 'bdev' or 'mtd_inodefs'. Inodes
in these pseudofilesystems are referenced from ordinary filesystem
inodes and carry mapping with real data of the device. Thus for these
inodes we have to use inode->i_mapping->backing_dev_info as we did so
far. We distinguish these filesystems by checking whether sb->s_bdi
points to a non-trivial backing device or not.

Example: Assume we have an ext3 filesystem on /dev/sda1 mounted on /.
There's a device inode A described by a path "/dev/sdb" on this
filesystem. This inode will be dirtied against backing device "8:0"
after this patch. bdev filesystem contains block device inode B coupled
with our inode A. When someone modifies a page of /dev/sdb, it's B that
gets dirtied and the dirtying happens against the backing device "8:16".
Thus both inodes get filed to a correct bdi list.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agochar: Mark /dev/zero and /dev/kmem as not capable of writeback
Jan Kara [Tue, 21 Sep 2010 09:49:01 +0000]
char: Mark /dev/zero and /dev/kmem as not capable of writeback

These devices don't do any writeback but their device inodes still can get
dirty so mark bdi appropriately so that bdi code does the right thing and files
inodes to lists of bdi carrying the device inodes.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agobdi: Initialize noop_backing_dev_info properly
Jan Kara [Tue, 21 Sep 2010 09:48:55 +0000]
bdi: Initialize noop_backing_dev_info properly

Properly initialize this backing dev info so that writeback code does not
barf when getting to it e.g. via sb->s_bdi.

Cc: stable@kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agosparc: Prevent no-handler signal syscall restart recursion.
David S. Miller [Wed, 22 Sep 2010 05:30:13 +0000]
sparc: Prevent no-handler signal syscall restart recursion.

Explicitly clear the "in-syscall" bit when we have no signal
handler and back up the program counters to back up the system
call.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosparc: Don't mask signal when we can't setup signal frame.
David S. Miller [Wed, 22 Sep 2010 04:41:12 +0000]
sparc: Don't mask signal when we can't setup signal frame.

Don't invoke the signal handler tracehook in that situation
either.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMerge branch 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Wed, 22 Sep 2010 01:21:05 +0000]
Merge branch 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux

* 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux:
  i2c-omap: Make sure i2c bus is free before setting it to idle

8 years agofs: {lock,unlock}_flocks() stubs to prepare for BKL removal
Sage Weil [Tue, 21 Sep 2010 21:35:37 +0000]
fs: {lock,unlock}_flocks() stubs to prepare for BKL removal

The lock structs are currently protected by the BKL, but are accessed by
code in fs/locks.c and misc file system and DLM code.  These stubs will
allow all users to switch to the new interface before the implementation
is changed to a spinlock.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sage Weil <sage@newdream.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoi2c-omap: Make sure i2c bus is free before setting it to idle
Mathias Nyman [Thu, 26 Aug 2010 07:36:44 +0000]
i2c-omap: Make sure i2c bus is free before setting it to idle

If the i2c bus receives an interrupt with both BB (bus busy) and
ARDY (register access ready) statuses set during the tranfer of the last message
the bus was put to idle while still busy.

This caused bus to timeout.

Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

8 years agoMerge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 21 Sep 2010 20:22:10 +0000]
Merge branch 'sched-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix nohz balance kick
  sched: Fix user time incorrectly accounted as system time on 32-bit

8 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 21 Sep 2010 20:21:42 +0000]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hw breakpoints: Fix pid namespace bug
  x86: Fix instruction breakpoint encoding
  oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel Celeron 540)
  kprobes: Fix Kconfig dependency

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Tue, 21 Sep 2010 18:20:10 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: select CRYPTO
  ceph: check mapping to determine if FILE_CACHE cap is used
  ceph: only send one flushsnap per cap_snap per mds session
  ceph: fix cap_snap and realm split
  ceph: stop sending FLUSHSNAPs when we hit a dirty capsnap
  ceph: correctly set 'follows' in flushsnap messages
  ceph: fix dn offset during readdir_prepopulate
  ceph: fix file offset wrapping at 4GB on 32-bit archs
  ceph: fix reconnect encoding for old servers
  ceph: fix pagelist kunmap tail
  ceph: fix null pointer deref on anon root dentry release

8 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle...
Linus Torvalds [Tue, 21 Sep 2010 18:00:30 +0000]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Hold a reference to the object whilst unbinding the eviction list
  drm/i915,agp/intel: Add second set of PCI-IDs for B43
  drm/i915: Fix Sandybridge fence registers
  drm/i915/crt: Downgrade warnings for hotplug failures
  drm/i915: Ensure that the crtcinfo is populated during mode_fixup()

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Tue, 21 Sep 2010 18:00:09 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: update comments to reflect LHCALL_LOAD_GDT_ENTRY.
  virtio: console: Prevent userspace from submitting NULL buffers
  virtio: console: Fix poll blocking even though there is data to read

8 years agosched: Fix nohz balance kick
Suresh Siddha [Mon, 13 Sep 2010 18:02:21 +0000]
sched: Fix nohz balance kick

There's a situation where the nohz balancer will try to wake itself:

cpu-x is idle which is also ilb_cpu
got a scheduler tick during idle
and the nohz_kick_needed() in trigger_load_balance() checks for
rq_x->nr_running which might not be zero (because of someone waking a
task on this rq etc) and this leads to the situation of the cpu-x
sending a kick to itself.

And this can cause a lockup.

Avoid this by not marking ourself eligible for kicking.

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1284400941.2684.19.camel@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

8 years agocfq-iosched: fix a kernel OOPs when usb key is inserted
Vivek Goyal [Tue, 14 Sep 2010 06:47:11 +0000]
cfq-iosched: fix a kernel OOPs when usb key is inserted

Mike reported a kernel crash when a usb key hotplug is performed while all
kernel thrads are not in a root cgroup and are running in one of the child
cgroups of blkio controller.

BUG: unable to handle kernel NULL pointer dereference at 0000002c
IP: [<c11c7b08>] cfq_get_queue+0x232/0x412
*pde = 00000000
Oops: 0000 [#1] PREEMPT
last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/host3/scsi_host/host3/uevent

[..]
Pid: 30039, comm: scsi_scan_3 Not tainted 2.6.35.2-fg.roam #1 Volvi2                         /Aspire 4315
EIP: 0060:[<c11c7b08>] EFLAGS: 00010086 CPU: 0
EIP is at cfq_get_queue+0x232/0x412
EAX: f705f9c0 EBX: e977abac ECX: 00000000 EDX: 00000000
ESI: f00da400 EDI: f00da4ec EBP: e977a800 ESP: dff8fd00
 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
Process scsi_scan_3 (pid: 30039, ti=dff8e000 task=f6b6c9a0 task.ti=dff8e000)
Stack:
 00000000 00000000 00000001 01ff0000 f00da508 00000000 f00da524 f00da540
<0> e7994940 dd631750 f705f9c0 e977a820 e977ac44 f00da4d0 00000001 f6b6c9a0
<0> 00000010 00008010 0000000b 00000000 00000001 e977a800 dd76fac0 00000246
Call Trace:
 [<c11c7f10>] ? cfq_set_request+0x228/0x34c
 [<c11c7ce8>] ? cfq_set_request+0x0/0x34c
 [<c11bb3b9>] ? elv_set_request+0xf/0x1c
 [<c11bdd51>] ? get_request+0x1ad/0x22f
 [<c11bddf2>] ? get_request_wait+0x1f/0x11a
 [<c11d013b>] ? kvasprintf+0x33/0x3b
 [<c127b537>] ? scsi_execute+0x1d/0x103
 [<c127b675>] ? scsi_execute_req+0x58/0x83
 [<c127c391>] ? scsi_probe_and_add_lun+0x188/0x7c2
 [<c12718c6>] ? attribute_container_add_device+0x15/0xfa
 [<c11c95d1>] ? kobject_get+0xf/0x13
 [<c126d1db>] ? get_device+0x10/0x14
 [<c127be93>] ? scsi_alloc_target+0x217/0x24d
 [<c127cbd8>] ? __scsi_scan_target+0x95/0x480
 [<c10204eb>] ? dequeue_entity+0x14/0x1fe
 [<c1020491>] ? update_curr+0x165/0x1ab
 [<c1020491>] ? update_curr+0x165/0x1ab
 [<c127d00d>] ? scsi_scan_channel+0x4a/0x76
 [<c127d0b0>] ? scsi_scan_host_selected+0x77/0xad
 [<c127d13c>] ? do_scan_async+0x0/0x11a
 [<c127d137>] ? do_scsi_scan_host+0x51/0x56
 [<c127d13c>] ? do_scan_async+0x0/0x11a
 [<c127d14a>] ? do_scan_async+0xe/0x11a
 [<c127d13c>] ? do_scan_async+0x0/0x11a
 [<c10354c5>] ? kthread+0x5e/0x63
 [<c1035467>] ? kthread+0x0/0x63
 [<c1002af6>] ? kernel_thread_helper+0x6/0x10
Code: 44 24 1c 54 83 44 24 18 54 83 fa 03 75 94 8b 06 c7 86 64 02 00 00 01 00 00 00 83 e0 03 09 f0 89 06 8b 44 24 28 8b 90 58 01 00 00 <8b> 42 2c 85 c0 75 03 8b 42 08 8d 54 24 48 52 8d 4c 24 50 51 68
EIP: [<c11c7b08>] cfq_get_queue+0x232/0x412 SS:ESP 0068:dff8fd00
CR2: 000000000000002c
---[ end trace 9a88306573f69b12 ]---

The problem here is that we don't have bdi->dev information available when
thread does some IO.  Hence when dev_name() tries to access bdi->dev, it
crashes.

This problem does not happen if kernel threads are in root group as root
group is statically allocated at device initialization time and we don't
hit this piece of code.

Fix it by delaying the filling of major and minor number information of
device in blk_group.  Initially a blk_group is created with 0 as device
information and this information is filled later once some more IO comes
in from same group.

Reported-by: Mike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoblock: fix blk_rq_map_kern bio direction flag
Benny Halevy [Mon, 13 Sep 2010 19:32:19 +0000]
block: fix blk_rq_map_kern bio direction flag

This bug was introduced in 7b6d91daee5cac6402186ff224c3af39d79f4a0e
"block: unify flags for struct bio and struct request"

Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agocciss: freeing uninitialized data on error path
Dan Carpenter [Mon, 13 Sep 2010 12:09:33 +0000]
cciss: freeing uninitialized data on error path

The "h->scatter_list" is allocated inside a for loop.  If any of those
allocations fail, then the rest of the list is uninitialized data.  When
we free it we should start from the top and free backwards so that we
don't call kfree() on uninitialized pointers.

Also if the allocation for "h->scatter_list" fails then we would get an
Oops here.  I should have noticed this when I send: 4ee69851c "cciss:
handle allocation failure."  but I didn't.  Sorry about that.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jens Axboe <jaxboe@fusionio.com>

8 years agoMerge remote branch 'linus' into drm-intel-fixes
Chris Wilson [Tue, 21 Sep 2010 08:14:55 +0000]
Merge remote branch 'linus' into drm-intel-fixes

8 years agosparc64: Fix race in signal instruction flushing.
David S. Miller [Tue, 21 Sep 2010 06:24:52 +0000]
sparc64: Fix race in signal instruction flushing.

If another cpu does a very wide munmap() on the signal frame area,
it can tear down the page table hierarchy from underneath us.

Borrow an idea from the 64-bit fault path's get_user_insn(), and
disable cross call interrupts during the page table traversal
to lock them in place while we operate.

Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agolguest: update comments to reflect LHCALL_LOAD_GDT_ENTRY.
Rusty Russell [Tue, 21 Sep 2010 16:54:01 +0000]
lguest: update comments to reflect LHCALL_LOAD_GDT_ENTRY.

We used to have a hypercall which reloaded the entire GDT, then we
switched to one which loaded a single entry (to match the IDT code).

Some comments were not updated, so fix them.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Reported by: Eviatar Khen <eviatarkhen@gmail.com>

8 years agovirtio: console: Prevent userspace from submitting NULL buffers
Amit Shah [Tue, 14 Sep 2010 07:56:16 +0000]
virtio: console: Prevent userspace from submitting NULL buffers

A userspace could submit a buffer with 0 length to be written to the
host.  Prevent such a situation.

This was not needed previously, but recent changes in the way write()
works exposed this condition to trigger a virtqueue event to the host,
causing a NULL buffer to be sent across.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: stable@kernel.org

8 years agovirtio: console: Fix poll blocking even though there is data to read
Hans de Goede [Thu, 16 Sep 2010 09:13:08 +0000]
virtio: console: Fix poll blocking even though there is data to read

I found this while working on a Linux agent for spice, the symptom I was
seeing was select blocking on the spice vdagent virtio serial port even
though there were messages queued up there.

virtio_console's port_fops_poll checks port->inbuf != NULL to determine
if read won't block. However if an application reads enough bytes from
inbuf through port_fops_read, to empty the current port->inbuf,
port->inbuf will be NULL even though there may be buffers left in the
virtqueue.

This causes poll() to block even though there is data to be read,
this patch fixes this by using will_read_block(port) instead of the
port->inbuf != NULL check.

Signed-off-By: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

8 years agoLinux 2.6.36-rc5
Linus Torvalds [Mon, 20 Sep 2010 23:56:53 +0000]
Linux 2.6.36-rc5

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
Linus Torvalds [Mon, 20 Sep 2010 23:45:08 +0000]
Merge git://git./linux/kernel/git/gregkh/staging-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: vt6655: fix buffer overflow
  Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Mon, 20 Sep 2010 23:44:40 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: musb: MAINTAINERS: Fix my mail address
  USB: serial/mos*: prevent reading uninitialized stack memory
  USB: otg: twl4030: fix phy initialization(v1)
  USB: EHCI: Disable langwell/penwell LPM capability
  usb: musb_debugfs: don't use the struct file private_data field with seq_files

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
Linus Torvalds [Mon, 20 Sep 2010 23:44:24 +0000]
Merge git://git./linux/kernel/git/gregkh/tty-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: mfd: fix bug in serial_hsu_remove()
  serial: amba-pl010: fix set_ldisc

8 years agoStaging: vt6655: fix buffer overflow
Dan Carpenter [Mon, 6 Sep 2010 12:32:30 +0000]
Staging: vt6655: fix buffer overflow

"param->u.wpa_associate.wpa_ie_len" comes from the user.  We should
check it so that the copy_from_user() doesn't overflow the buffer.

Also further down in the function, we assume that if
"param->u.wpa_associate.wpa_ie_len" is set then "abyWPAIE[0]" is
initialized.  To make that work, I changed the test here to say that if
"wpa_ie_len" is set then "wpa_ie" has to be a valid pointer or we return
-EINVAL.

Oddly, we only use the first element of the abyWPAIE[] array.  So I
suspect there may be some other issues in this function.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoRevert: "Staging: batman-adv: Adding netfilter-bridge hooks"
Sven Eckelmann [Sat, 4 Sep 2010 23:58:18 +0000]
Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"

This reverts commit 96d592ed599434d2d5f339a1d282871bc6377d2c.

The netfilter hook seems to be misused and may leak skbs in situations
when NF_HOOK returns NF_STOLEN. It may not filter everything as
expected. Also the ethernet bridge tables are not yet capable to
understand batman-adv packet correctly.

It was only added for testing purposes and can be removed again.

Reported-by: Vasiliy Kulikov <segooon@gmail.com>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoserial: mfd: fix bug in serial_hsu_remove()
Feng Tang [Mon, 6 Sep 2010 12:41:02 +0000]
serial: mfd: fix bug in serial_hsu_remove()

Medfield HSU driver deal with 4 pci devices(3 uart ports + 1 dma controller),
so in pci remove func, we need handle them differently

Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoserial: amba-pl010: fix set_ldisc
Mika Westerberg [Sat, 4 Sep 2010 07:23:23 +0000]
serial: amba-pl010: fix set_ldisc

Commit d87d9b7d1 ("tty: serial - fix tty referencing in set_ldisc") changed
set_ldisc to take ldisc number as parameter. This patch fixes AMBA PL010 driver
according the new prototype.

Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: musb: MAINTAINERS: Fix my mail address
Felipe Balbi [Thu, 9 Sep 2010 06:04:25 +0000]
USB: musb: MAINTAINERS: Fix my mail address

If we don't, contributors to musb and any USB OMAP
code will be sending mails to an unexistent inbox.

Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: serial/mos*: prevent reading uninitialized stack memory
Dan Rosenberg [Wed, 15 Sep 2010 21:44:16 +0000]
USB: serial/mos*: prevent reading uninitialized stack memory

The TIOCGICOUNT device ioctl in both mos7720.c and mos7840.c allows
unprivileged users to read uninitialized stack memory, because the
"reserved" member of the serial_icounter_struct struct declared on the
stack is not altered or zeroed before being copied back to the user.
This patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: otg: twl4030: fix phy initialization(v1)
Ming Lei [Mon, 6 Sep 2010 15:27:09 +0000]
USB: otg: twl4030: fix phy initialization(v1)

Commit 461c317705eca5cac09a360f488715927fd0a927(into 2.6.36-v3)
is put forward to power down phy if no usb cable is connected,
but does introduce the two issues below:

1), phy is not into work state if usb cable is connected
with PC during poweron, so musb device mode is not usable
in such case, follows the reasons:
-twl4030_phy_resume is not called, so
regulators are not enabled
i2c access are not enabled
usb mode not configurated

2), The kernel warings[1] of regulators 'unbalanced disables'
is caused if poweron without usb cable connected
with PC or b-device.

This patch fixes the two issues above:
-power down phy only if no usb cable is connected with PC
and b-device
-do phy initialization(via __twl4030_phy_resume) if usb cable
is connected with PC(vbus event) or another b-device(ID event) in
twl4030_usb_probe.

This patch also doesn't put VUSB3V1 LDO into active mode in
twl4030_usb_ldo_init until VBUS/ID change detected, so we can
save more power consumption than before.

This patch is verified OK on Beagle board either connected with
usb cable or not when poweron.

[1]. warnings of 'unbalanced disables' of regulators.
[root@OMAP3EVM /]# dmesg
------------[ cut here ]------------
WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128()
unbalanced disables for VUSB1V8
Modules linked in:
Backtrace:
[<c0030c48>] (dump_backtrace+0x0/0x110) from [<c034f5a8>] (dump_stack+0x18/0x1c)
 r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d
[<c034f590>] (dump_stack+0x0/0x1c) from [<c0057da8>] (warn_slowpath_common+0x54/0x6c)
[<c0057d54>] (warn_slowpath_common+0x0/0x6c) from [<c0057e64>] (warn_slowpath_fmt+0x38/0x40)
 r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb
 r4:c78e6c00
[<c0057e2c>] (warn_slowpath_fmt+0x0/0x40) from [<c01ed6b8>] (_regulator_disable+0x38/0x128)
 r3:c0410e53 r2:c0410ad5
[<c01ed680>] (_regulator_disable+0x0/0x128) from [<c01ed87c>] (regulator_disable+0x24/0x38)
 r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00
[<c01ed858>] (regulator_disable+0x0/0x38) from [<c02382dc>] (twl4030_phy_power+0x15c/0x17c)
 r5:c78595c0 r4:00000000
[<c0238180>] (twl4030_phy_power+0x0/0x17c) from [<c023831c>] (twl4030_phy_suspend+0x20/0x2c)
 r6:00000000 r5:c78595c0 r4:c78595c0
[<c02382fc>] (twl4030_phy_suspend+0x0/0x2c) from [<c0238638>] (twl4030_usb_irq+0x11c/0x16c)
 r5:c78595c0 r4:00000040
[<c023851c>] (twl4030_usb_irq+0x0/0x16c) from [<c034ec18>] (twl4030_usb_probe+0x2c4/0x32c)
 r6:00000000 r5:00000000 r4:c78595c0
[<c034e954>] (twl4030_usb_probe+0x0/0x32c) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
 r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c78e663c r5:c78e6608 r4:c78e6608
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c021597c>] (platform_device_add+0x110/0x16c)
[<c021586c>] (platform_device_add+0x0/0x16c) from [<c0220cb0>] (add_numbered_child+0xd8/0x118)
 r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000
[<c0220bd8>] (add_numbered_child+0x0/0x118) from [<c001c618>] (twl_probe+0x3a4/0x72c)
[<c001c274>] (twl_probe+0x0/0x72c) from [<c02601ac>] (i2c_device_probe+0x7c/0xa4)
[<c0260130>] (i2c_device_probe+0x0/0xa4) from [<c0214244>] (driver_probe_device+0xd0/0x190)
 r5:c7856e20 r4:c047c860
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c7856e54 r5:c7856e20 r4:c7856e20
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c0211fd8>] (device_register+0x1c/0x20)
[<c0211fbc>] (device_register+0x0/0x20) from [<c0260aa8>] (i2c_new_device+0xec/0x150)
 r5:c7856e00 r4:c7856e20
[<c02609bc>] (i2c_new_device+0x0/0x150) from [<c0260dc0>] (i2c_register_adapter+0xa0/0x1c4)
 r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0
[<c0260d20>] (i2c_register_adapter+0x0/0x1c4) from [<c0260f80>] (i2c_add_numbered_adapter+0x9c/0xb4)
 r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000
[<c0260ee4>] (i2c_add_numbered_adapter+0x0/0xb4) from [<c034efa4>] (omap_i2c_probe+0x324/0x3e8)
 r5:00000000 r4:c78fd000
[<c034ec80>] (omap_i2c_probe+0x0/0x3e8) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c021436c>] (__driver_attach+0x68/0x8c)
 r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0
[<c0214304>] (__driver_attach+0x0/0x8c) from [<c021399c>] (bus_for_each_dev+0x50/0x84)
 r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000
[<c021394c>] (bus_for_each_dev+0x0/0x84) from [<c0214068>] (driver_attach+0x20/0x28)
 r6:c047e214 r5:c047e214 r4:c00270d0
[<c0214048>] (driver_attach+0x0/0x28) from [<c0213274>] (bus_add_driver+0xa8/0x228)
[<c02131cc>] (bus_add_driver+0x0/0x228) from [<c02146a4>] (driver_register+0xb0/0x13c)
[<c02145f4>] (driver_register+0x0/0x13c) from [<c0215744>] (platform_driver_register+0x4c/0x60)
 r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc
r4:c00270d0
[<c02156f8>] (platform_driver_register+0x0/0x60) from [<c001f69c>] (omap_i2c_init_driver+0x14/0x1c)
[<c001f688>] (omap_i2c_init_driver+0x0/0x1c) from [<c002c460>] (do_one_initcall+0xd0/0x1a4)
[<c002c390>] (do_one_initcall+0x0/0x1a4) from [<c0008478>] (kernel_init+0x9c/0x154)
[<c00083dc>] (kernel_init+0x0/0x154) from [<c005b6fc>] (do_exit+0x0/0x688)
 r5:c00083dc r4:00000000
---[ end trace 1b75b31a2719ed1d ]---

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <me@felipebalbi.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agoUSB: EHCI: Disable langwell/penwell LPM capability
Alek Du [Mon, 6 Sep 2010 13:50:57 +0000]
USB: EHCI: Disable langwell/penwell LPM capability

We have to do so due to HW limitation.

Signed-off-by: Alek Du <alek.du@intel.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agousb: musb_debugfs: don't use the struct file private_data field with seq_files
Mathias Nyman [Mon, 6 Sep 2010 10:52:01 +0000]
usb: musb_debugfs: don't use the struct file private_data field with seq_files

seq_files use the private_data field of a file struct for storing a seq_file structure,
data should be stored in seq_file's own private field (e.g. file->private_data->private)
Otherwise seq_release() will free the private data when the file is closed.

Signed-off-by: Mathias Nyman <mathias.nyman@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

8 years agodrm/i915: Hold a reference to the object whilst unbinding the eviction list
Chris Wilson [Mon, 20 Sep 2010 09:31:40 +0000]
drm/i915: Hold a reference to the object whilst unbinding the eviction list

During heavy aperture thrashing we may be forced to wait upon several active
objects during eviction. The active list may be the last reference to
these objects and so the action of waiting upon one of them may cause
another to be freed (and itself unbound). To prevent the object
disappearing underneath us, we need to acquire and hold a reference
whilst unbinding.

This should fix the reported page refcount OOPS:

kernel BUG at drivers/gpu/drm/i915/i915_gem.c:1444!
...
RIP: 0010:[<ffffffffa0093026>]  [<ffffffffa0093026>] i915_gem_object_put_pages+0x25/0xf5 [i915]
Call Trace:
 [<ffffffffa009481d>] i915_gem_object_unbind+0xc5/0x1a7 [i915]
 [<ffffffffa0098ab2>] i915_gem_evict_something+0x3bd/0x409 [i915]
 [<ffffffffa0027923>] ? drm_gem_object_lookup+0x27/0x57 [drm]
 [<ffffffffa0093bc3>] i915_gem_object_bind_to_gtt+0x1d3/0x279 [i915]
 [<ffffffffa0095b30>] i915_gem_object_pin+0xa3/0x146 [i915]
 [<ffffffffa0027948>] ? drm_gem_object_lookup+0x4c/0x57 [drm]
 [<ffffffffa00961bc>] i915_gem_do_execbuffer+0x50d/0xe32 [i915]

Reported-by: Shawn Starr <shawn.starr@rogers.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18902
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agofrv: double syscall restarts, syscall restart in sigreturn()
Al Viro [Mon, 20 Sep 2010 14:13:25 +0000]
frv: double syscall restarts, syscall restart in sigreturn()

We need to make sure that only the first do_signal() to be handled on
the way out syscall will bother with syscall restarts; additionally, the
check on the "signal has user handler" path had been wrong - compare
with restart prevention in sigreturn()...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofrv: handling of restart into restart_syscall is fscked
Al Viro [Mon, 20 Sep 2010 14:13:19 +0000]
frv: handling of restart into restart_syscall is fscked

do_signal() should place the syscall number in gr7, not gr8 when
handling ERESTART_WOULDBLOCK.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofrv: avoid infinite loop of SIGSEGV delivery
Al Viro [Mon, 20 Sep 2010 14:13:14 +0000]
frv: avoid infinite loop of SIGSEGV delivery

Use force_sigsegv() rather than force_sig(SIGSEGV, ...) as the former
resets the SEGV handler pointer which will kill the process, rather than
leaving it open to an infinite loop if the SEGV handler itself caused a
SEGV signal.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofrv: fix address verification holes in setup_frame/setup_rt_frame
Al Viro [Mon, 20 Sep 2010 14:13:09 +0000]
frv: fix address verification holes in setup_frame/setup_rt_frame

a) sa_handler might be maliciously set to point to kernel memory;
   blindly dereferencing it in FDPIC case is a Bad Idea(tm).

b) I'm not sure you need that set_fs(USER_DS) there at all, but if you
   do, you'd better do it *before* checking the frame you've decided to
   use with access_ok(), lest sigaltstack() becomes a convenient
   roothole.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agofrv: restart_block.fn needs to be reset on sigreturn
Al Viro [Mon, 20 Sep 2010 14:13:04 +0000]
frv: restart_block.fn needs to be reset on sigreturn

Reset restart_block.fn on executing a sigreturn such that any currently
pending system call restarts will be forced to return -EINTR.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agomm: further fix swapin race condition
Hugh Dickins [Mon, 20 Sep 2010 02:40:22 +0000]
mm: further fix swapin race condition

Commit 4969c1192d15 ("mm: fix swapin race condition") is now agreed to
be incomplete.  There's a race, not very much less likely than the
original race envisaged, in which it is further necessary to check that
the swapcache page's swap has not changed.

Here's the reasoning: cast in terms of reuse_swap_page(), but probably
could be reformulated to rely on try_to_free_swap() instead, or on
swapoff+swapon.

A, faults into do_swap_page(): does page1 = lookup_swap_cache(swap1) and
comes through the lock_page(page1).

B, a racing thread of the same process, faults on the same address: does
page1 = lookup_swap_cache(swap1) and now waits in lock_page(page1), but
for whatever reason is unlucky not to get the lock any time soon.

A carries on through do_swap_page(), a write fault, but cannot reuse the
swap page1 (another reference to swap1).  Unlocks the page1 (but B
doesn't get it yet), does COW in do_wp_page(), page2 now in that pte.

C, perhaps the parent of A+B, comes in and write faults the same swap
page1 into its mm, reuse_swap_page() succeeds this time, swap1 is freed.

kswapd comes in after some time (B still unlucky) and swaps out some
pages from A+B and C: it allocates the original swap1 to page2 in A+B,
and some other swap2 to the original page1 now in C.  But does not
immediately free page1 (actually it couldn't: B holds a reference),
leaving it in swap cache for now.

B at last gets the lock on page1, hooray! Is PageSwapCache(page1)? Yes.
Is pte_same(*page_table, orig_pte)? Yes, because page2 has now been
given the swap1 which page1 used to have.  So B proceeds to insert page1
into A+B's page_table, though its content now belongs to C, quite
different from what A wrote there.

B ought to have checked that page1's swap was still swap1.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88...
Linus Torvalds [Sun, 19 Sep 2010 18:09:23 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/mattst88/alpha-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha-2.6:
  alpha: deal with multiple simultaneously pending signals
  alpha: fix a 14 years old bug in sigreturn tracing
  alpha: unb0rk sigsuspend() and rt_sigsuspend()
  alpha: belated ERESTART_RESTARTBLOCK race fix
  alpha: Shift perf event pending work earlier in timer interrupt
  alpha: wire up fanotify and prlimit64 syscalls
  alpha: kill big kernel lock
  alpha: fix build breakage in asm/cacheflush.h
  alpha: remove unnecessary cast from void* in assignment.
  alpha: Use static const char * const where possible

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6
Linus Torvalds [Sun, 19 Sep 2010 18:06:34 +0000]
Merge git://git./linux/kernel/git/davem/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide: Fix ordering of procfs registry.

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Sun, 19 Sep 2010 18:05:50 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  dca: disable dca on IOAT ver.3.0 multiple-IOH platforms
  netpoll: Disable IRQ around RCU dereference in netpoll_rx
  sctp: Do not reset the packet during sctp_packet_config().
  net/llc: storing negative error codes in unsigned short
  MAINTAINERS: move atlx discussions to netdev
  drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory
  drivers/net/eql.c: prevent reading uninitialized stack memory
  drivers/net/usb/hso.c: prevent reading uninitialized memory
  xfrm: dont assume rcu_read_lock in xfrm_output_one()
  r8169: Handle rxfifo errors on 8168 chips
  3c59x: Remove atomic context inside vortex_{set|get}_wol
  tcp: Prevent overzealous packetization by SWS logic.
  net: RPS needs to depend upon USE_GENERIC_SMP_HELPERS
  phylib: fix PAL state machine restart on resume
  net: use rcu_barrier() in rollback_registered_many
  bonding: correctly process non-linear skbs
  ipv4: enable getsockopt() for IP_NODEFRAG
  ipv4: force_igmp_version ignored when a IGMPv3 query received
  ppp: potential NULL dereference in ppp_mp_explode()
  net/llc: make opt unsigned in llc_ui_setsockopt()
  ...

8 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Sun, 19 Sep 2010 18:05:05 +0000]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410
  ARM: S3C64XX: Fix coding style errors on mach-real6410
  ARM: S3C64XX: Prototype SPI devices
  ARM: S3C64XX: Fix dev-spi build
  ARM: SAMSUNG: Fix on s5p_gpio_[get,set]_drvstr
  ARM: SAMSUNG: Fix on drive strength value
  ARM: S5PV210: Add FIMC clocks
  ARM: S5PV210: Reduce the iodesc length of systimer
  ARM: S5PV210: Update I2C-1 Clock Register Property.
  ARM: S5P: Decrease IO Registers memory region size on FIMC
  ARM: S5P: Fix DMA coherent mask for FIMC

8 years agoCoda: mount hangs because of missed REQ_WRITE rename
Jan Harkes [Sat, 18 Sep 2010 03:26:01 +0000]
Coda: mount hangs because of missed REQ_WRITE rename

Coda's REQ_* defines were renamed to avoid clashes with the block layer
(commit 4aeefdc69f7b: "coda: fixup clash with block layer REQ_*
defines").

However one was missed and response messages are no longer matched with
requests and waiting threads are no longer woken up.  This patch fixes
this.

Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu>
[ Also fixed up whitespace while at it  -Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoalpha: deal with multiple simultaneously pending signals
Al Viro [Sat, 18 Sep 2010 12:42:27 +0000]
alpha: deal with multiple simultaneously pending signals

Unlike the other targets, alpha sets _one_ sigframe and
buggers off until the next syscall/interrupt, even if
more signals are pending.  It leads to quite a few unpleasant
inconsistencies, starting with SIGSEGV potentially arriving
not where it should and including e.g. mess with sigsuspend();
consider two pending signals blocked until sigsuspend()
unblocks them.  We pick the first one; then, if we are hit
by interrupt while in the handler, we process the second one
as well.  If we are not, and if no syscalls had been made,
we get out of the first handler and leave the second signal
pending; normally sigreturn() would've picked it anyway, but
here it starts with restoring the original mask and voila -
the second signal is blocked again.  On everything else we
get both delivered consistently.

It's actually easy to fix; the only thing to watch out for
is prevention of double syscall restart.  Fortunately, the
idea I've nicked from arm fix by rmk works just fine...

Testcase demonstrating the behaviour in question; on alpha
we get one or both flags set (usually one), on everything
else both are always set.
#include <signal.h>
#include <stdio.h>
int had1, had2;
void f1(int sig) { had1 = 1; }
void f2(int sig) { had2 = 1; }
main()
{
sigset_t set1, set2;
sigemptyset(&set1);
sigemptyset(&set2);
sigaddset(&set2, 1);
sigaddset(&set2, 2);
signal(1, f1);
signal(2, f2);
sigprocmask(SIG_SETMASK, &set2, NULL);
raise(1);
raise(2);
sigsuspend(&set1);
printf("had1:%d had2:%d\n", had1, had2);
}

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: fix a 14 years old bug in sigreturn tracing
Al Viro [Sat, 18 Sep 2010 12:41:16 +0000]
alpha: fix a 14 years old bug in sigreturn tracing

The way sigreturn() is implemented on alpha breaks PTRACE_SYSCALL,
all way back to 1.3.95 when alpha has grown PTRACE_SYSCALL support.

What happens is direct return to ret_from_syscall, in order to bypass
mangling of a3 (error indicator) and prevent other mutilations of
registers (e.g. by syscall restart).  That's fine, but... the entire
TIF_SYSCALL_TRACE codepath is kept separate on alpha and post-syscall
stopping/notifying the tracer is after the syscall.  And the normal
path we are forcibly switching to doesn't have it.

So we end up with *one* stop in traced sigreturn() vs. two in other
syscalls.  And yes, strace is visibly broken by that; try to strace
the following
#include <signal.h>
#include <stdio.h>
void f(int sig) {}
main()
{
signal(SIGHUP, f);
raise(SIGHUP);
write(1, "eeeek\n", 6);
}
and watch the show.  The
close(1)                                = 405
in the end of strace output is coming from return value of write() (6 ==
__NR_close on alpha) and syscall number of exit_group() (__NR_exit_group ==
405 there).

The fix is fairly simple - the only thing we end up missing is the call
of syscall_trace() and we can tell whether we'd been called from the
SYSCALL_TRACE path by checking ra value.  Since we are setting the
switch_stack up (that's what sys_sigreturn() does), we have the right
environment for calling syscall_trace() - just before we call
undo_switch_stack() and return.  Since undo_switch_stack() will overwrite
s0 anyway, we can use it to store the result of "has it been called from
SYSCALL_TRACE path?" check.  The same thing applies in rt_sigreturn().

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: unb0rk sigsuspend() and rt_sigsuspend()
Al Viro [Sat, 18 Sep 2010 12:40:07 +0000]
alpha: unb0rk sigsuspend() and rt_sigsuspend()

Old code used to set regs->r0 and regs->r19 to force the right
return value.  Leaving that after switch to ERESTARTNOHAND
was a Bad Idea(tm), since now that screws the restart - if we
hit the case when get_signal_to_deliver() returns 0, we will
step back to syscall insn, with v0 set to EINTR and a3 to 1.
The latter won't matter, since EINTR is 4, aka __NR_write.

Testcase:

#include <signal.h>
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/syscall.h>

main()
{
sigset_t mask;
sigemptyset(&mask);
sigaddset(&mask, SIGCONT);
sigprocmask(SIG_SETMASK, &mask, NULL);
kill(0, SIGCONT);
syscall(__NR_sigsuspend, 1, "b0rken\n", 7);
}

results on alpha in immediate message to stdout...

Fix is obvious; moreover, since we don't need regs anymore, we can
switch to normal prototypes for these guys and lose the wrappers.
Even better, rt_sigsuspend() is identical to generic version in
kernel/signal.c now.

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: belated ERESTART_RESTARTBLOCK race fix
Al Viro [Sat, 18 Sep 2010 12:38:47 +0000]
alpha: belated ERESTART_RESTARTBLOCK race fix

same thing as had been done on other targets back in 2003 -
move setting ->restart_block.fn into {rt_,}sigreturn().

Tested-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: Shift perf event pending work earlier in timer interrupt
Michael Cree [Sun, 19 Sep 2010 06:05:40 +0000]
alpha: Shift perf event pending work earlier in timer interrupt

Pending work from the performance event subsystem is executed in
the timer interrupt.  This patch shifts the call to
perf_event_do_pending() before the call to update_process_times()
as the latter may call back into the perf event subsystem and it
is prudent to have the pending work executed first.

Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: wire up fanotify and prlimit64 syscalls
Mikael Pettersson [Thu, 16 Sep 2010 18:12:55 +0000]
alpha: wire up fanotify and prlimit64 syscalls

The 2.6.36-rc kernel added three new system calls:
fanotify_init, fanotify_mark, and prlimit64.  This
patch wires them up on Alpha.

Built and booted on an XP900.  Untested beyond that.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: kill big kernel lock
Arnd Bergmann [Tue, 14 Sep 2010 23:34:56 +0000]
alpha: kill big kernel lock

All uses of the BKL on alpha are totally bogus, nothing
is really protected by this. Remove the remaining users
so we don't have to mark alpha as 'depends on BKL'.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: linux-alpha@vger.kernel.org
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: fix build breakage in asm/cacheflush.h
Tejun Heo [Tue, 14 Sep 2010 13:00:22 +0000]
alpha: fix build breakage in asm/cacheflush.h

Alpha SMP flush_icache_user_range() is implemented as an inline
function inside include/asm/cacheflush.h.  It dereferences @current
but doesn't include linux/sched.h and thus causes build failure if
linux/sched.h wasn't included previously.  Fix it by including the
needed header file explicitly.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: remove unnecessary cast from void* in assignment.
matt mooney [Tue, 14 Sep 2010 09:27:39 +0000]
alpha: remove unnecessary cast from void* in assignment.

Acked-by: Jan-Benedict Glaw <jbglaw@lug-owl.de>
Signed-off-by: matt mooney <mfm@muteddisk.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agoalpha: Use static const char * const where possible
Joe Perches [Tue, 14 Sep 2010 08:23:47 +0000]
alpha: Use static const char * const where possible

Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

8 years agodca: disable dca on IOAT ver.3.0 multiple-IOH platforms
Sosnowski, Maciej [Thu, 16 Sep 2010 06:02:26 +0000]
dca: disable dca on IOAT ver.3.0 multiple-IOH platforms

Direct Cache Access is not supported on IOAT ver.3.0 multiple-IOH platforms.
This patch blocks registering of dca providers when multiple IOH detected with IOAT ver.3.0.

Signed-off-by: Maciej Sosnowski <maciej.sosnowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410
Darius Augulis [Thu, 9 Sep 2010 12:41:31 +0000]
ARM: S3C64XX: Add IORESOURCE_IRQ_HIGHLEVEL flag to dm9000 on mach-real6410

Add IORESOURCE_IRQ_HIGHLEVEL irq flag to dm9000 driver
platform data in board mach-real6410.

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C64XX: Fix coding style errors on mach-real6410
Darius Augulis [Thu, 9 Sep 2010 12:40:22 +0000]
ARM: S3C64XX: Fix coding style errors on mach-real6410

Fix errors reported by checkpatch.pl script

Signed-off-by: Darius Augulis <augulis.darius@gmail.com>
[kgene.kim@samsung.com: minor title fix]
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agoARM: S3C64XX: Prototype SPI devices
Mark Brown [Sat, 18 Sep 2010 00:54:38 +0000]
ARM: S3C64XX: Prototype SPI devices

Avoids build warnings due to the undeclared non-statics.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

8 years agonetpoll: Disable IRQ around RCU dereference in netpoll_rx
Herbert Xu [Fri, 17 Sep 2010 23:55:03 +0000]
netpoll: Disable IRQ around RCU dereference in netpoll_rx

We cannot use rcu_dereference_bh safely in netpoll_rx as we may
be called with IRQs disabled.  We could however simply disable
IRQs as that too causes BH to be disabled and is safe in either
case.

Thanks to John Linville for discovering this bug and providing
a patch.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agosctp: Do not reset the packet during sctp_packet_config().
Vlad Yasevich [Wed, 15 Sep 2010 14:00:26 +0000]
sctp: Do not reset the packet during sctp_packet_config().

sctp_packet_config() is called when getting the packet ready
for appending of chunks.  The function should not touch the
current state, since it's possible to ping-pong between two
transports when sending, and that can result packet corruption
followed by skb overlfow crash.

Reported-by: Thomas Dreibholz <dreibh@iem.uni-due.de>
Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoceph: select CRYPTO
Sage Weil [Fri, 17 Sep 2010 19:30:31 +0000]
ceph: select CRYPTO

We select CRYPTO_AES, but not CRYPTO.

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Fri, 17 Sep 2010 17:53:28 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: pcm - Fix race with proc files
  ALSA: pcm - Fix unbalanced pm_qos_request
  ALSA: HDA: Enable internal speaker on Dell M101z
  ALSA: patch_nvhdmi.c: Fix supported sample rate list.
  sound: Remove pr_<level> uses of KERN_<level>
  ALSA: hda - Add quirk for Toshiba C650D using a Conexant CX20585
  ALSA: hda_intel: ALSA HD Audio patch for Intel Patsburg DeviceIDs

8 years agoMerge branch 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelv...
Linus Torvalds [Fri, 17 Sep 2010 17:25:47 +0000]
Merge branch 'hwmon-for-linus' of git://git./linux/kernel/git/jdelvare/staging

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  hwmon: (lm95241) Replace rate sysfs attribute with update_interval
  hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval
  hwmon: (w83627ehf) Use proper exit sequence
  hwmon: (emc1403) Remove unnecessary hwmon_device_unregister
  hwmon: (f75375s) Do not overwrite values read from registers
  hwmon: (f75375s) Shift control mode to the correct bit position
  hwmon: New subsystem maintainers
  hwmon: (lis3lv02d) Prevent NULL pointer dereference

8 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes
Linus Torvalds [Fri, 17 Sep 2010 17:23:42 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-fixes

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: gfs2_logd should be using interruptible waits

8 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Fri, 17 Sep 2010 17:23:08 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
  firewire: nosy: fix build when CONFIG_FIREWIRE=N
  firewire: ohci: activate cycle timer register quirk on Ricoh chips

8 years agoMerge branch 'for-linus' of git://neil.brown.name/md
Linus Torvalds [Fri, 17 Sep 2010 17:22:48 +0000]
Merge branch 'for-linus' of git://neil.brown.name/md

* 'for-linus' of git://neil.brown.name/md:
  md: fix v1.x metadata update when a disk is missing.
  md: call md_update_sb even for 'external' metadata arrays.

8 years agoarm: fix really nasty sigreturn bug
Al Viro [Fri, 17 Sep 2010 13:34:39 +0000]
arm: fix really nasty sigreturn bug

If a signal hits us outside of a syscall and another gets delivered
when we are in sigreturn (e.g. because it had been in sa_mask for
the first one and got sent to us while we'd been in the first handler),
we have a chance of returning from the second handler to location one
insn prior to where we ought to return.  If r0 happens to contain -513
(-ERESTARTNOINTR), sigreturn will get confused into doing restart
syscall song and dance.

Incredible joy to debug, since it manifests as random, infrequent and
very hard to reproduce double execution of instructions in userland
code...

The fix is simple - mark it "don't bother with restarts" in wrapper,
i.e. set r8 to 0 in sys_sigreturn and sys_rt_sigreturn wrappers,
suppressing the syscall restart handling on return from these guys.
They can't legitimately return a restart-worthy error anyway.

Testcase:
#include <unistd.h>
#include <signal.h>
#include <stdlib.h>
#include <sys/time.h>
#include <errno.h>

void f(int n)
{
__asm__ __volatile__(
"ldr r0, [%0]\n"
"b 1f\n"
"b 2f\n"
"1:b .\n"
"2:\n" : : "r"(&n));
}

void handler1(int sig) { }
void handler2(int sig) { raise(1); }
void handler3(int sig) { exit(0); }

main()
{
struct sigaction s = {.sa_handler = handler2};
struct itimerval t1 = { .it_value = {1} };
struct itimerval t2 = { .it_value = {2} };

signal(1, handler1);

sigemptyset(&s.sa_mask);
sigaddset(&s.sa_mask, 1);
sigaction(SIGALRM, &s, NULL);

signal(SIGVTALRM, handler3);

setitimer(ITIMER_REAL, &t1, NULL);
setitimer(ITIMER_VIRTUAL, &t2, NULL);

f(-513); /* -ERESTARTNOINTR */

write(1, "buggered\n", 9);
return 1;
}

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

8 years agoceph: check mapping to determine if FILE_CACHE cap is used
Sage Weil [Fri, 17 Sep 2010 16:54:08 +0000]
ceph: check mapping to determine if FILE_CACHE cap is used

See if the i_data mapping has any pages to determine if the FILE_CACHE
capability is currently in use, instead of assuming it is any time the
rdcache_gen value is set (i.e., issued -> used).

This allows the MDS RECALL_STATE process work for inodes that have cached
pages.

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agoMerge branch 'fix/hda' into for-linus
Takashi Iwai [Fri, 17 Sep 2010 15:44:20 +0000]
Merge branch 'fix/hda' into for-linus

8 years agohwmon: (lm95241) Replace rate sysfs attribute with update_interval
Guenter Roeck [Fri, 17 Sep 2010 15:24:15 +0000]
hwmon: (lm95241) Replace rate sysfs attribute with update_interval

update_interval is the matching attribute defined in the hwmon sysfs ABI.
Use it.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

8 years agohwmon: (adm1031) Replace update_rate sysfs attribute with update_interval
Guenter Roeck [Fri, 17 Sep 2010 15:24:14 +0000]
hwmon: (adm1031) Replace update_rate sysfs attribute with update_interval

The attribute reflects an interval, not a rate.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

8 years agohwmon: (w83627ehf) Use proper exit sequence
Jonas Jonsson [Fri, 17 Sep 2010 15:24:13 +0000]
hwmon: (w83627ehf) Use proper exit sequence

According to the datasheet for Winbond W83627DHG the proper way to exit
the Extended Function Mode is to write 0xaa to the EFER(0x2e or 0x4e).

Signed-off-by: Jonas Jonsson <jonas@ludd.ltu.se>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

8 years agohwmon: (emc1403) Remove unnecessary hwmon_device_unregister
Yong Wang [Fri, 17 Sep 2010 15:24:12 +0000]
hwmon: (emc1403) Remove unnecessary hwmon_device_unregister

It is unnecessary and wrong to call hwmon_device_unregister in error
handling before hwmon_device_register is called.

Signed-off-by: Yong Wang <yong.y.wang@intel.com>
Reviewed-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

8 years agohwmon: (f75375s) Do not overwrite values read from registers
Guillem Jover [Fri, 17 Sep 2010 15:24:12 +0000]
hwmon: (f75375s) Do not overwrite values read from registers

All bits in the values read from registers to be used for the next
write were getting overwritten, avoid doing so to not mess with the
current configuration.

Signed-off-by: Guillem Jover <guillem@hadrons.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

8 years agohwmon: (f75375s) Shift control mode to the correct bit position
Guillem Jover [Fri, 17 Sep 2010 15:24:11 +0000]
hwmon: (f75375s) Shift control mode to the correct bit position

The spec notes that fan0 and fan1 control mode bits are located in bits
7-6 and 5-4 respectively, but the FAN_CTRL_MODE macro was making the
bits shift by 5 instead of by 4.

Signed-off-by: Guillem Jover <guillem@hadrons.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: stable@kernel.org
Signed-off-by: Jean Delvare <khali@linux-fr.org>

8 years agohwmon: New subsystem maintainers
Jean Delvare [Fri, 17 Sep 2010 15:24:11 +0000]
hwmon: New subsystem maintainers

Guenter Roeck volunteered to adopt the hwmon subsystem as long as he
wasn't the only maintainer. As this was also my own condition, we can
add the two of us as co-maintainers of the hwmon subsystem.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

8 years agohwmon: (lis3lv02d) Prevent NULL pointer dereference
Kuninori Morimoto [Fri, 17 Sep 2010 15:24:10 +0000]
hwmon: (lis3lv02d) Prevent NULL pointer dereference

If CONFIG_PM was selected and lis3lv02d_platform_data was NULL,
the kernel will be panic when halt command run.

Reported-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Samu Onkalo <samu.p.onkalo@nokia.com>
Sigend-off-by: Jean Delvare <khali@linux-fr.org>

8 years agoceph: only send one flushsnap per cap_snap per mds session
Sage Weil [Fri, 17 Sep 2010 15:03:08 +0000]
ceph: only send one flushsnap per cap_snap per mds session

Sending multiple flushsnap messages is problematic because we ignore
the response if the tid doesn't match, and the server may only respond to
each one once.  It's also a waste.

So, skip cap_snaps that are already on the flushing list, unless the caller
tells us to resend (because we are reconnecting).

Signed-off-by: Sage Weil <sage@newdream.net>

8 years agoGFS2: gfs2_logd should be using interruptible waits
Steven Whitehouse [Thu, 9 Sep 2010 13:45:00 +0000]
GFS2: gfs2_logd should be using interruptible waits

Looks like this crept in, in a recent update.

Reported-by:  Krzysztof Urbaniak <urban@bash.org.pl>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>

8 years agodrm/i915,agp/intel: Add second set of PCI-IDs for B43
Chris Wilson [Fri, 17 Sep 2010 07:22:30 +0000]
drm/i915,agp/intel: Add second set of PCI-IDs for B43

There is a second revision of B43 (a desktop gen4 part) floating around,
functionally equivalent to the original B43, so simply add the new
PCI-IDs.

Bugzilla: https://bugs.freedesktop.org/show_bugs.cgi?id=30221
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

8 years agodrm/i915: Fix Sandybridge fence registers
Chris Wilson [Thu, 16 Sep 2010 23:32:02 +0000]
drm/i915: Fix Sandybridge fence registers

With 5 places to update when adding handling for fence registers, it is
easy to overlook one or two. Correct that oversight, but fence
management should be improved before a new set of registers is added.

Bugzilla: https://bugs.freedesktop.org/show_bug?id=30199
Original patch by: Yuanhan Liu <yuanhan.liu@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org

8 years agodrm/i915/crt: Downgrade warnings for hotplug failures
Chris Wilson [Sun, 12 Sep 2010 18:58:04 +0000]
drm/i915/crt: Downgrade warnings for hotplug failures

These are not fatal errors, so do not alarm the user by filling the
logs with *** ERROR ***. Especially as we know that g4x CRT detection
is a little sticky.

On the one hand the errors are valid since they are warning us of a
stall -- we poll the register whilst holding the mode lock so not even
the mouse will update. On the other hand, those stalls were already present
yet nobody complained.

Reported-by: Andi Kleen <andi@firstfloor.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18332
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

8 years agonet/llc: storing negative error codes in unsigned short
Dan Carpenter [Thu, 16 Sep 2010 08:12:55 +0000]
net/llc: storing negative error codes in unsigned short

If the alloc_skb() fails then we return 65431 instead of -ENOBUFS
(-105).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoMAINTAINERS: move atlx discussions to netdev
Chris Snook [Fri, 17 Sep 2010 05:00:28 +0000]
MAINTAINERS: move atlx discussions to netdev

The atlx drivers are sufficiently mature that we no longer need a separate
mailing list for them.  Move the discussion to netdev, so we can decommission
atl1-devel, which is now mostly spam.

Signed-off-by: Chris Snook <chris.snook@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodrivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory
Dan Rosenberg [Wed, 15 Sep 2010 11:43:12 +0000]
drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory

Fixed formatting (tabs and line breaks).

The CHELSIO_GET_QSET_NUM device ioctl allows unprivileged users to read
4 bytes of uninitialized stack memory, because the "addr" member of the
ch_reg struct declared on the stack in cxgb_extension_ioctl() is not
altered or zeroed before being copied back to the user.  This patch
takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodrivers/net/eql.c: prevent reading uninitialized stack memory
Dan Rosenberg [Wed, 15 Sep 2010 11:43:04 +0000]
drivers/net/eql.c: prevent reading uninitialized stack memory

Fixed formatting (tabs and line breaks).

The EQL_GETMASTRCFG device ioctl allows unprivileged users to read 16
bytes of uninitialized stack memory, because the "master_name" member of
the master_config_t struct declared on the stack in eql_g_master_cfg()
is not altered or zeroed before being copied back to the user.  This
patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agodrivers/net/usb/hso.c: prevent reading uninitialized memory
Dan Rosenberg [Wed, 15 Sep 2010 11:43:28 +0000]
drivers/net/usb/hso.c: prevent reading uninitialized memory

Fixed formatting (tabs and line breaks).

The TIOCGICOUNT device ioctl allows unprivileged users to read
uninitialized stack memory, because the "reserved" member of the
serial_icounter_struct struct declared on the stack in hso_get_count()
is not altered or zeroed before being copied back to the user.  This
patch takes care of it.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agoxfrm: dont assume rcu_read_lock in xfrm_output_one()
Eric Dumazet [Thu, 16 Sep 2010 12:27:50 +0000]
xfrm: dont assume rcu_read_lock in xfrm_output_one()

ip_local_out() is called with rcu_read_lock() held from ip_queue_xmit()
but not from other call sites.

Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

8 years agomd: fix v1.x metadata update when a disk is missing.
NeilBrown [Wed, 8 Sep 2010 06:48:17 +0000]
md: fix v1.x metadata update when a disk is missing.

If an array with 1.x metadata is assembled with the last disk missing,
md doesn't properly record the fact that the disk was missing.

This is unlikely to cause a real problem as the event count will be
different to the count on the missing disk so it won't be included in
the array.  However it could still cause confusion.

So make sure we clear all the relevant slots, not just the early ones.

Signed-off-by: NeilBrown <neilb@suse.de>

8 years agomd: call md_update_sb even for 'external' metadata arrays.
NeilBrown [Tue, 7 Sep 2010 07:02:47 +0000]
md: call md_update_sb even for 'external' metadata arrays.

Now that we depend on md_update_sb to clear variable bits in
mddev->flags (rather than trying not to set them) it is important to
always call md_update_sb when appropriate.

md_check_recovery has this job but explicitly avoids it for ->external
metadata arrays.  This is not longer appropraite, or needed.

However we do want to avoid taking the mddev lock if only
MD_CHANGE_PENDING is set as that is not cleared by md_update_sb for
external-metadata arrays.

Reported-by:  "Kwolek, Adam" <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>

8 years agohw breakpoints: Fix pid namespace bug
Matt Helsley [Mon, 13 Sep 2010 20:01:18 +0000]
hw breakpoints: Fix pid namespace bug

Hardware breakpoints can't be registered within pid namespaces
because tsk->pid is passed rather than the pid in the current
namespace.

(See https://bugzilla.kernel.org/show_bug.cgi?id=17281 )

This is a quick fix demonstrating the problem but is not the
best method of solving the problem since passing pids internally
is not the best way to avoid pid namespace bugs. Subsequent patches
will show a better solution.

Much thanks to Frederic Weisbecker <fweisbec@gmail.com> for doing
the bulk of the work finding this bug.

Reported-by: Robin Green <greenrd@greenrd.org>
Signed-off-by: Matt Helsley <matthltc@us.ibm.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: 2.6.33-2.6.35 <stable@kernel.org>
LKML-Reference: <f63454af09fb1915717251570423eb9ddd338340.1284407762.git.matthltc@us.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>

8 years agoMerge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Fri, 17 Sep 2010 02:38:08 +0000]
Merge branch 'x86-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86: hpet: Work around hardware stupidity
  x86, build: Disable -fPIE when compiling with CONFIG_CC_STACKPROTECTOR=y
  x86, cpufeature: Suppress compiler warning with gcc 3.x
  x86, UV: Fix initialization of max_pnode

8 years agox86: Fix instruction breakpoint encoding
Frederic Weisbecker [Fri, 17 Sep 2010 01:24:13 +0000]
x86: Fix instruction breakpoint encoding

Lengths and types of breakpoints are encoded in a half byte
into CPU registers. However when we extract these values
and store them, we add a high half byte part to them: 0x40 to the
length and 0x80 to the type.
When that gets reloaded to the CPU registers, the high part
is masked.

While making the instruction breakpoints available for perf,
I zapped that high part on instruction breakpoint encoding
and that broke the arch -> generic translation used by ptrace
instruction breakpoints. Writing dr7 to set an inst breakpoint
was then failing.

There is no apparent reason for these high parts so we could get
rid of them altogether. That's an invasive change though so let's
do that later and for now fix the problem by restoring that inst
breakpoint high part encoding in this sole patch.

Reported-by: Kelvie Wong <kelvie@ieee.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>