12 years ago[SCSI] ncr53c8xx: convert to use the data buffer accessors
FUJITA Tomonori [Mon, 14 May 2007 10:22:21 +0000]
[SCSI] ncr53c8xx: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] sym53c8xx: convert to use the data buffer accessors
FUJITA Tomonori [Fri, 25 May 2007 17:31:17 +0000]
[SCSI] sym53c8xx: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ppa: coding police and printk levels
Alan Cox [Mon, 9 Jul 2007 19:00:10 +0000]
[SCSI] ppa: coding police and printk levels

Add printk levels
Clean up some oddities of formatting
Fix goto labels

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
Satyam Sharma [Mon, 9 Jul 2007 19:00:07 +0000]
[SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc

drivers/scsi/aic7xxx_old.c:aic7xxx_slave_alloc() unnecessarily passes
GFP_ATOMIC (along with GFP_KERNEL) to kmalloc() from a context that is not
atomic. Remove the pointless GFP_ATOMIC.

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Doug Ledford <dledford@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
Satyam Sharma [Mon, 9 Jul 2007 19:00:07 +0000]
[SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c

drivers/message/i2o/device.c:i2o_parm_field_get() unnecessarily passes
GFP_ATOMIC (along with GFP_KERNEL) to kmalloc() from a context that is not
atomic. Remove the pointless GFP_ATOMIC.

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] remove the dead CYBERSTORMIII_SCSI option
Adrian Bunk [Mon, 9 Jul 2007 19:00:10 +0000]
[SCSI] remove the dead CYBERSTORMIII_SCSI option

Not converted to the 2.6 kconfig system and no code in the tree.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
Cornelia Huck [Mon, 9 Jul 2007 18:59:59 +0000]
[SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA

With

 dma-mapping-prevent-dma-dependent-code-from-linking-on.patch

scsi fails to build on !HAS_DMA architectures:

drivers/built-in.o(.text+0x20af6): In function `scsi_dma_map':
: undefined reference to `dma_map_sg'
drivers/built-in.o(.text+0x20b5c): In function `scsi_dma_unmap':
: undefined reference to `dma_unmap_sg'

I split those functions out into a new file. Builds on s390 and i386.

Move scsi_dma_{map,unmap} into scsi_lib_dma.c which is only build if
HAS_DMA is set.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] Clean up scsi_add_lun a bit
Matthew Wilcox [Wed, 11 Jul 2007 18:54:55 +0000]
[SCSI] Clean up scsi_add_lun a bit

This patch tidies up scsi_add_lun a bit.  I rewrote the kerneldoc to match
the actual parameters, moved the check for RBC and MMC REPORT_LUN devices
away from the switch(), changed the setup of sdev->type to account for
BLIST_ISROM, moved the check for BLIST_NO_ULD_ATTACH further down in
the function, removed a bogus comment and fixed some whitespace issues.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
Thomas Bogendoerfer [Wed, 11 Jul 2007 17:08:31 +0000]
[SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs

remove printk, which triggers because of low scsi clock on SNI RMs

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] sni_53c710: Cleanup
Thomas Bogendoerfer [Wed, 11 Jul 2007 17:09:36 +0000]
[SCSI] sni_53c710: Cleanup

- base address is now a physical address; no need to convert it
- remove not needed error printk in module init function

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla4xxx: Fix underrun/overrun conditions
David C Somayajulu [Mon, 9 Jul 2007 19:44:36 +0000]
[SCSI] qla4xxx: Fix underrun/overrun conditions

On Wed, 2007-06-06 at 11:55 -0700, David C Somayajulu wrote:
This patch fixes the code handling underrun and overrun conditions.
Also fixed coding style as per Mike Christie's advice.

Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] megaraid_mbox: use mutex instead of semaphore
Matthias Kaehlcke [Mon, 9 Jul 2007 19:00:11 +0000]
[SCSI] megaraid_mbox: use mutex instead of semaphore

The Megaraid Mailbox driver uses a semaphore as mutex.  Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: "Patro, Sumant" <Sumant.Patro@lsi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
Salyzyn, Mark [Mon, 9 Jul 2007 13:57:11 +0000]
[SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.

Adding Adaptec 51245 (16 port), 51645 (20 port) and 52445 (28 port)
Universal Serial RAID controllers to the aacraid documentation.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla2xxx: update version to 8.02.00-k1.
Seokmann Ju [Thu, 5 Jul 2007 20:17:01 +0000]
[SCSI] qla2xxx: update version to 8.02.00-k1.

Following patch bump up the driver version reflecting NPIV addition to
the qla2xxx.

- version changed from 8.01.07-k7 to 8.02.00-k1.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla2xxx: add support for NPIV
Seokmann Ju [Thu, 5 Jul 2007 20:16:51 +0000]
[SCSI] qla2xxx: add support for NPIV

Following patch adds support for NPIV (N-Port ID Virtualization) to the
qla2xxx.

- supported within switched-fabric topologies only.
- supports up to 63 virtual ports on each physical port.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] stex: use resid for xfer len information
Ed Lin [Thu, 5 Jul 2007 19:09:06 +0000]
[SCSI] stex: use resid for xfer len information

The original implementation in stex_ys_commands() is inappropriate.
For xfer len information, we should use resid instead.

Signed-off-by: Ed Lin <ed.lin@promise.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] Add Brownie 1200U3P to blacklist
Matthew Wilcox [Thu, 5 Jul 2007 14:57:50 +0000]
[SCSI] Add Brownie 1200U3P to blacklist

The Brownie 1200U3P has the same problem with REPORT LUNS as the
1600U3P.  Add it to the blacklist.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] scsi.c: convert to use the data buffer accessors
Boaz Harrosh [Wed, 4 Jul 2007 18:26:01 +0000]
[SCSI] scsi.c: convert to use the data buffer accessors

 - a couple of prints, they can use the accessors

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] tmscsim: Further clean-up of the driver
Boaz Harrosh [Wed, 4 Jul 2007 18:18:55 +0000]
[SCSI] tmscsim: Further clean-up of the driver

 - The saved sg_count was a leftover from the time the driver was doing
   dma mapping by himself. But now that scsi-ml is called for the mapping
   it is not the drivers responsibility.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: G. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] CONFIG_SCSI_FD_8xx no longer exists
Geert Uytterhoeven [Thu, 28 Jun 2007 11:53:02 +0000]
[SCSI] CONFIG_SCSI_FD_8xx no longer exists

CONFIG_SCSI_FD_8xx no longer exists.

Apparently it was renamed to CONFIG_SCSI_SEAGATE, but the Makefile was
not correctly updated.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] sr: fix error handling in module_init
Akinobu Mita [Mon, 25 Jun 2007 15:39:33 +0000]
[SCSI] sr: fix error handling in module_init

Sweep registered blkdev when scsi_register_driver has failed.

Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: Fix NPIV compile problem
James Bottomley [Sat, 14 Jul 2007 23:47:04 +0000]
[SCSI] lpfc: Fix NPIV compile problem

drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_create_port':
drivers/scsi/lpfc/lpfc_init.c:1573: error: 'struct kobject' has no member named 'dentry'

Just remove the if check on this ... lpfc shouldn't be poking around
in kobject structures.

drivers/scsi/lpfc/lpfc_init.c: In function 'lpfc_pci_probe_one':
drivers/scsi/lpfc/lpfc_init.c:1723: warning: unused variable 'retval'

And remove the unused variable.

Cc: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: fix NPIV mapping problems
FUJITA Tomonori [Wed, 4 Jul 2007 13:03:11 +0000]
[SCSI] lpfc: fix NPIV mapping problems

This patch uses dma_map_sg with phba->pcidev->dev instead of
scsi_dma_map.

scsi_dma_map doesn't work for NPIV since fc_vport->dev isn't fully
initialized. check_addr() in arch/x86_64/kernel/pci-nommu.c leads to
the crash since dev->dma_mask is NULL.

For more details:

http://marc.info/?l=linux-scsi&m=118312448030633&w=2

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: add missed data buffer accessor
Boaz Harrosh [Tue, 3 Jul 2007 15:12:35 +0000]
[SCSI] lpfc: add missed data buffer accessor

This is an addendum to:

 commit a0b4f78f9a4c869e9b29f254054ad7441cb40bbf
 Author: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
    [SCSI] lpfc: convert to use the data buffer accessors

One place was missed in the merge

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Acked-by: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] Remove unused method scsi_device_cancel
Priyanka Gupta [Tue, 19 Jun 2007 21:02:10 +0000]
[SCSI] Remove unused method scsi_device_cancel

Removes an obsolete method scsi_device_cancel which isn't being used
anywhere in the kernel.

Signed-off-by: Priyanka Gupta <priyankag@google.com>
Acked-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ibmvscsi: fix timeout bugs
FUJITA Tomonori [Tue, 22 May 2007 04:50:51 +0000]
[SCSI] ibmvscsi: fix timeout bugs

The viosrp_crq timeout field is in seconds.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Santiago Leon <santil@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aacraid: add support for long serial number information
Salyzyn, Mark [Tue, 19 Jun 2007 20:29:24 +0000]
[SCSI] aacraid: add support for long serial number information

Support displaying long serial number information. Reuse sysfs handler
internally as helper.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aacraid: correct PERC2/QC and family match quirk list
Salyzyn, Mark [Tue, 19 Jun 2007 20:05:12 +0000]
[SCSI] aacraid: correct PERC2/QC and family match quirk list

The Dell PERC2/QC erroneously was listed as having the 31 bit limit
quirk on the interface allocations, removing the reference to repair
this oversight. Also, the 2 quad pci address (family) match catch-all
also retained the 31 bit limit and the 34 SG limit quirks in a paranoid
move. Now, many years later, we find that none of the Adapters that did
trigger with the family match had such quirks; these quirks are all
limited to the 4 quad pci address matches to select legacy adapters
already populated.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aacraid: change srb status busy return
Salyzyn, Mark [Tue, 19 Jun 2007 15:41:21 +0000]
[SCSI] aacraid: change srb status busy return

This patch is more like a spelling correction than a fix. It was
discovered that if we had a busy status return from the Adapter for the
SCSI srb command to a physical component, that we returned
DID_NO_CONNECT rather than what one would expect DID_BUS_BUSY.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] 53c700: Fixup m68k drivers:
Geert Uytterhoeven [Tue, 19 Jun 2007 07:47:28 +0000]
[SCSI] 53c700: Fixup m68k drivers:

  - a4000t.c: Add missing include, needed in some configurations
  - bvme6000_scsi.c: Kill bogus opening brace
  - zorro7xx.c: Remove MODULE_DEVICE_TABLE, it should be part of another
                patch

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] tmscsim: clean-up status codes
Guennadi Liakhovetski [Sun, 17 Jun 2007 18:32:27 +0000]
[SCSI] tmscsim: clean-up status codes

Remove redundant defines from the header, replace all occurances in the
code with standard SAM_STAT_ macros. Also fix what seems to be a typo in
testing for (status == H_OVER_UNDER_RUN)...

Signed-off-by: G. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] zfcp: Report FCP LUN to SCSI midlayer
Christof Schmitt [Tue, 19 Jun 2007 08:25:30 +0000]
[SCSI] zfcp: Report FCP LUN to SCSI midlayer

When reporting SCSI devices to the SCSI midlayer, use the FCP LUN as
LUN reported to the SCSI layer. With this approach, zfcp does not have
to create unique LUNS, and this code can be removed.

Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] zfcp: clear adapter status flags during adapter shutdown
Volker Sameske [Tue, 29 May 2007 13:29:49 +0000]
[SCSI] zfcp: clear adapter status flags during adapter shutdown

In some cases we did not reset some adapter status flags properly.
This patch clears these flags during FCP adapter shutdown.

Signed-off-by: Volker Sameske <sameske@de.ibm.com>
Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi_iser: convert to use the data buffer accessors
FUJITA Tomonori [Fri, 1 Jun 2007 09:56:21 +0000]
[SCSI] iscsi_iser: convert to use the data buffer accessors

iscsi_iser: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

TODO: use scsi_for_each_sg().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Erez Zilber <erezz@voltaire.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: update to version 8.2.1
James Smart [Mon, 18 Jun 2007 00:56:39 +0000]
[SCSI] lpfc: update to version 8.2.1

This patch updates the driver version to 8.2.1

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: convert to use the data buffer accessors
FUJITA Tomonori [Mon, 18 Jun 2007 00:56:39 +0000]
[SCSI] lpfc: convert to use the data buffer accessors

 This patch is a reworked version of the data buffer accessors patch
 so that it applies on the NPIV sources.

 The original patch was developed and submitted by Fujita Tomonori:
      FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
      http://marc.info/?l=linux-scsi&m=117896446832171&w=2

  - remove the unnecessary map_single path.

  - convert to use the new accessors for the sg lists and the
    parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: bug fixes
James Smart [Mon, 18 Jun 2007 00:56:39 +0000]
[SCSI] lpfc: bug fixes

 Following the NPIV support, the following changes have been accumulated
 in the testing and qualification of the driver:

 - Fix affinity of ELS ring to slow/deferred event processing
 - Fix Ring attention masks
 - Defer dev_loss_tmo timeout handling to worker thread
 - Consolidate link down error classification for better error checking
 - Remove unused/deprecated nlp_initiator_tmr timer
 - Fix for async scan - move adapter init code back into pci_probe_one
   context. Fix async scan interfaces.
 - Expand validation of ability to create vports
 - Extract VPI resource cnt from firmware
 - Tuning of Login/Reject policies to better deal with overwhelmned targets
 - Misc ELS and discovery fixes
 - Export the npiv_enable attribute to sysfs
 - Mailbox handling fix
 - Add debugfs support
 - A few other small misc fixes:
    - wrong return values, double-frees, bad locking
 - Added adapter failure heartbeat

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3
James Smart [Mon, 18 Jun 2007 00:56:38 +0000]
[SCSI] lpfc: NPIV: add NPIV support on top of SLI-3

NPIV support is added to the driver.  It utilizes the interfaces of
the fc transport for the creation and deletion of vports. Within the
driver, a new Scsi_Host is created for each NPIV instance, and is
paired with a new instance of a FC port.  This allows N FC Port
elements to share a single Adapter.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: NPIV: add SLI-3 interface
James Smart [Mon, 18 Jun 2007 00:56:37 +0000]
[SCSI] lpfc: NPIV: add SLI-3 interface

NPIV support is only available via new adapter interface extensions,
termed SLI-3. This interface changes some of the basic behaviors such
as command and response ring element sizes and data structures, as
well as a change in buffer posting.  Note: the new firmware extensions
are found only on our mid-range and enterprise 4Gig adapters - so NPIV
support is available only on these newer adapters. The latest firmware
can be downloaded from the Emulex support page.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] lpfc: NPIV: split ports
James Smart [Mon, 18 Jun 2007 00:56:36 +0000]
[SCSI] lpfc: NPIV: split ports

The driver is reorganized to separate the handling of the adapter from
the handling of the FC port. Adapter handling includes submissions of
command requests, receiving responses, and managing adapter resources.
The FC port includes the discovery engine, login handling, and the
mapping of a Scsi_Host on the "port".  Although not a large functional
change, as it touches core structures and functions, resulting in a
large text delta.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] esp_scsi: convert to use the data buffer accessors
FUJITA Tomonori [Fri, 25 May 2007 19:51:32 +0000]
[SCSI] esp_scsi: convert to use the data buffer accessors

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] hptiop: convert to use the data buffer accessors
FUJITA Tomonori [Mon, 14 May 2007 11:25:31 +0000]
[SCSI] hptiop: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: HighPoint Linux Team <linux@highpoint-tech.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] 53c700: Amiga Zorro NCR53c710 SCSI
Kars de Jong [Sun, 17 Jun 2007 12:47:09 +0000]
[SCSI] 53c700: Amiga Zorro NCR53c710 SCSI

New driver for Amiga Zorro bus NCR53c710 SCSI controllers, using the 53c700
SCSI core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] 53c700: Amiga 4000T NCR53c710 SCSI
Kars de Jong [Sun, 17 Jun 2007 12:47:08 +0000]
[SCSI] 53c700: Amiga 4000T NCR53c710 SCSI

New driver for the Amiga 4000T built-in NCR53c710 SCSI controller, using the
53c700 SCSI core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] 53c700: m68k MVME16x NCR53C710 SCSI
Kars de Jong [Sun, 17 Jun 2007 12:47:07 +0000]
[SCSI] 53c700: m68k MVME16x NCR53C710 SCSI

New driver for the MVME16x NCR53C710 SCSI controller, using the 53c700 SCSI
core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] 53c700: m68k BVME6000 NCR53C710 SCSI
Kars de Jong [Sun, 17 Jun 2007 12:47:06 +0000]
[SCSI] 53c700: m68k BVME6000 NCR53C710 SCSI

New driver for the BVME6000 NCR53C710 SCSI controller, using the 53c700 SCSI
core.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] 53c700: m68k support for the 53c700 SCSI core
Kars de Jong [Sun, 17 Jun 2007 12:47:05 +0000]
[SCSI] 53c700: m68k support for the 53c700 SCSI core

Add m68k support to the 53c700 SCSI driver

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mpt fusion: fix for mounted raid volume filesytem that goes read-only
Eric Moore [Fri, 15 Jun 2007 23:27:21 +0000]
[SCSI] mpt fusion: fix for mounted raid volume filesytem that goes read-only

If there is IO going to the volume while a hidden disk is being torn down,
there is a case where we would return a DID_NO_CONNECT for IO sent to the
volume. The end result is the volume goes read-only. This problem is due to the
fact the firmware mapped target ids saved in per device object is phys_disk_num
for hidden  raid components, and target_id for the volume. There is a single
case when both phys_disk_num and target_id are equal, so enters this issue. We
fix this issue by checking the tflags when the device is torned down,
insuring the IO being completed is meant for hidden raid component, not the
volume.  In addition to this fix, there are a couple other cases to address
hidden raid components. For instance task_abort and device reset are not
supported by mpt fw for hidden raid components, a bus reset would be required
or target reset to volume.

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mpt fusion: cleanup eh handlers
Eric Moore [Fri, 15 Jun 2007 23:24:14 +0000]
[SCSI] mpt fusion: cleanup eh handlers

nice cosmetic cleaning of eh thread callback funtions

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] a100u2w: Convert into Linux style
Alan Cox [Fri, 15 Jun 2007 13:45:30 +0000]
[SCSI] a100u2w: Convert into Linux style

I was investigating strange driver behaviour and thought that readable
code and proper visible types might help explain why it didn't work right
the moment a second SCB was outstanding to the controller. I was right

- Cleanup, linuxise, demacro
- Remove the BSD dual licence on the new work
- Switch the if ALPHA to if __LP64__. (struct size is then right
elsewhere) and then to CONFIG_64BIT as per Christoph's request
- Fix the recursive locking on a reset. This is the only actual real code
change (I hope ;)).

I'm not clear what the right way to handle the BIOS param stuff is on n
on x86-32/64. Using phys_to_virt and stuff is ugly and probably doesn't
make sense elsewhere

Still has a couple of odd things - and there seems to be a commonly shared
EEPROM handling error several drivers have. Roughly speaking several SCSI
drivers go

try and read EEPROM
It failed..
Write any changes between the default and the data we read

Which is great as for some paths we've no idea what was in
before, so each boot won't write it all back, won't checksum but will
repeat the bug

Also it can still sleep for a second with IRQ off, and there is some
dubious looking error path locking marked FIXME in case anyone feels
inspired to work on it. Not a newly introduced bug, and at least its now
marked.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] fc_transport: Check portstates before invoking target scan
Hannes Reinecke [Thu, 14 Jun 2007 13:16:45 +0000]
[SCSI] fc_transport: Check portstates before invoking target scan

When a target scan is initiated from sysfs, we should check the
portstate prior to invoke scsi_scan_target().
Otherwise scsi_scan_target() might oops as the rport might already
been removed from the scsi host and the traversal from the rport to
the scsi_host in scsi_scan_target() will fail.
Also the portstate already told us that communication with the target
has failed, so it's quite pointless to try.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Cc: James Smart <James.Smart@Emulex.Com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi_tcp: convert to use the data buffer accessors
FUJITA Tomonori [Thu, 14 Jun 2007 13:13:17 +0000]
[SCSI] iscsi_tcp: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

TODO: use scsi_for_each_sg().

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mpt fusion: bump version
Eric Moore [Wed, 13 Jun 2007 22:35:21 +0000]
[SCSI] mpt fusion: bump version

bump version

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mpt fusion: fc loginfo using defines from the header
Eric Moore [Wed, 13 Jun 2007 22:34:36 +0000]
[SCSI] mpt fusion: fc loginfo using defines from the header

rewrite of  mpt_fc_log_info to use the enum/defines from mpi_log_fc.h

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mpt fusion: remove unused header - linux_compat.h
Eric Moore [Wed, 13 Jun 2007 22:33:48 +0000]
[SCSI] mpt fusion: remove unused header - linux_compat.h

remove unused header

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mpt fusion: remove unused header - mpi_inb.h
Eric Moore [Wed, 13 Jun 2007 22:33:05 +0000]
[SCSI] mpt fusion: remove unused header - mpi_inb.h

fc inband managment header deleted

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mpt fusion: new mpi headers version 1.5.16
Eric Moore [Wed, 13 Jun 2007 22:32:20 +0000]
[SCSI] mpt fusion: new mpi headers version 1.5.16

mpi header update

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mpt fusion: update MAINTAINERS (fusion part)
Eric Moore [Wed, 13 Jun 2007 22:31:07 +0000]
[SCSI] mpt fusion: update MAINTAINERS (fusion part)

Update assocated fusion sources with new support email address.

Signed-off-by: Eric Moore <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ibmvscsi: Abort path fix
Brian King [Wed, 13 Jun 2007 22:12:40 +0000]
[SCSI] ibmvscsi: Abort path fix

Since it is completely possible for scsi core to call
a LLDD's eh_abort function after the command has completed,
fix ibmvscsi to return SUCCESS if this is the case.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ibmvscsi: Misc. locking fixes
Brian King [Wed, 13 Jun 2007 22:12:33 +0000]
[SCSI] ibmvscsi: Misc. locking fixes

Fix a couple locking bugs discovered during code inspection.
ibmvscsi_send_srp_event needs to be called with the host lock
held. This patch fixes a couple paths in the code where this
wasn't true.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ibmvscsi: Add eh_host_reset_handler
Brian King [Wed, 13 Jun 2007 22:12:26 +0000]
[SCSI] ibmvscsi: Add eh_host_reset_handler

Adds an eh_host_reset_handler to ibmvscsi which resets the connection
to the vscsi server. This patch also adds a timer to internally
issues commands to prevent client hangs in the case of a misbehaving
server. Tested by modifying the VIOS such that it would occasionally
drop one or more request in sequence.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ibmvscsi: Enhanced error logging
Brian King [Wed, 13 Jun 2007 22:12:19 +0000]
[SCSI] ibmvscsi: Enhanced error logging

Converts ibmvscsi to use dev_printk and friends to simplify
debugging. ibmvscsi adapter initialization now looks like this:

ibmvscsi 30000005: SRP_VERSION: 16.a
ibmvscsi 30000005: partner initialization complete
ibmvscsi 30000005: sent SRP login
ibmvscsi 30000005: SRP_LOGIN succeeded

Additionally, this patch adds the logging of a couple return codes in
a couple logs.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ibmvscsi: Remove unnecessary map_sg check
Brian King [Wed, 13 Jun 2007 22:12:11 +0000]
[SCSI] ibmvscsi: Remove unnecessary map_sg check

Since sg_tablesize is set appropriately in the scsi host template,
remove the unnecessary check to make sure it is not exceeded
following the dma_map_sg call.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] i2o: convert to use the data buffer accessors
FUJITA Tomonori [Wed, 13 Jun 2007 15:41:06 +0000]
[SCSI] i2o: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Note: needs to change i2o_dma_map_sg when the chaining sg is ready.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aacraid: add user initiated reset
Salyzyn, Mark [Tue, 12 Jun 2007 13:33:54 +0000]
[SCSI] aacraid: add user initiated reset

Add the ability for an application to issue a hardware reset to the
adapter via sysfs. Typical uses include restarting the adapter after it
has been flashed. Bumped revision number for the driver and added a
feature to periodically check the adapter's health (check_interval),
update the adapter's concept of time (update_interval) and block
checking/resetting of the adapter (check_reset).

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aacraid: probe related code cleanup
Salyzyn, Mark [Mon, 11 Jun 2007 20:17:55 +0000]
[SCSI] aacraid: probe related code cleanup

Sundry cleanups:
1) Use kzalloc instead of kmalloc.
2) Make sure probe worked before recalling the SCSI command to finalize
processing.
3) _aac_probe_container2 and _aac_probe_container1 return value goes
unused, change return to void.
4) Use a lower depth pointer reference to pick up the driver instance
variable.
5) Although effectively unused except to fake for scsicmd validity, set
the scsi_done in probe code to aac_probe_container_callback1 instead of
the less valid dummy reference to _aac_probe_container1.
6) SCp.phase is set in aac_valid_context, drop setting up this value in
caller when unnecessary.
7) take container target id at the beginning, rather than referencing
scmd_id() to pick it up.

There should be no side effects or functionality changes.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] scsi_debug: correct parameter default text
Randy Dunlap [Mon, 11 Jun 2007 18:36:40 +0000]
[SCSI] scsi_debug: correct parameter default text

Correct the module info text for the default value of
"every_nth" to 0.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Douglas Gilbert <dougg@torque.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla4xxx: allow hba to be online when initiator ip address is uninitialized
David C Somayajulu [Sat, 9 Jun 2007 00:37:16 +0000]
[SCSI] qla4xxx: allow hba to be online when initiator ip address is uninitialized
This patch provides the following:

1. remove warning ignoring the return value of pci_set_mwi()
2. allows HBA to be online when the initiator ip address is uninitialized.

Signed-off-by: David Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] areca: improve driver stability and compatibility
nickcheng(鄭守謙 [Fri, 15 Jun 2007 03:43:32 +0000]
[SCSI] areca: improve driver stability and compatibility

Description:

    1. Implement PCI-Express error recovery function and AER
       capability, especially thanks to Yanmin Zhang's openhanded help
       about AER

    2. Implement the selection of ARCMSR_MAX_XFER_SECTORS_B=4096 if
       firmware version is latter than 1.42

    3. Add arcmsr_done4_abort_postqueue in arcmsr_iop_reset function
       to improve the stability as hot-unplug/plug

    4. Modify the ISR, arcmsr_interrupt routine, to prevent the
       inconsistency with sg_mod driver if application directly calls
       the arcmsr driver w/o passing through scsi midlayer

Signed-off-by: Nick Cheng <nick.cheng@areca.com.tw>
[jejb: unused variable removal]
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aacraid: convert to use the data buffer accessors
FUJITA Tomonori [Fri, 25 May 2007 17:00:42 +0000]
[SCSI] aacraid: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ips: convert to use the data buffer accessors
FUJITA Tomonori [Wed, 13 Jun 2007 14:27:09 +0000]
[SCSI] ips: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

TODO: use scsi_for_each_sg() in the breakup handling.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] ib_srp: convert to use the data buffer accessors
FUJITA Tomonori [Fri, 25 May 2007 17:28:25 +0000]
[SCSI] ib_srp: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] mesh: convert to use the data buffer accessors
FUJITA Tomonori [Sat, 26 May 2007 04:07:28 +0000]
[SCSI] mesh: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi class, iscsi_tcp, iser, qla4xxx: add netdevname sysfs attr
Mike Christie [Wed, 30 May 2007 17:57:25 +0000]
[SCSI] iscsi class, iscsi_tcp, iser, qla4xxx: add netdevname sysfs attr

iSCSI must support software iscsi (iscsi_tcp, iser), hardware iscsi (qla4xxx),
and partial offload (broadcom). To be able to allow each stack or driver
or port (virtual or physical) to be able to log into the same target portal
we use the initiator tuple [[HWADDRESS | NETDEVNAME], INITIATOR_NAME] and
the target tuple [TARGETNAME, CONN_ADDRESS, CONN_PORT] to id a session.
This patch adds the netdev name, which is used by software iscsi when
it binds a session to a netdevice using the SO_BINDTODEVICE sock opt.
It cannot use HWADDRESS because if someone did vlans then the same netdevice
will have the same mac and the initiator,target id will not be unique.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi class, qla4xxx, iscsi_tcp: export local address
Mike Christie [Wed, 30 May 2007 17:57:24 +0000]
[SCSI] iscsi class, qla4xxx, iscsi_tcp: export local address

This patch exports the local address for the session. For
qla4xxx this is the ip of the hba's port. For software
this is the src addr of the socket.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi_tcp: fix fd leak
Mike Christie [Wed, 30 May 2007 17:57:23 +0000]
[SCSI] iscsi_tcp: fix fd leak

This patch should fix the file descriptor leak problem. A quick look
through the kernel shows that users of sockfd_lookup use sockfd_put to
release their handle. We were using sock_release which from the comments
and code look like it does not release the get() on the file from the
lookup.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla4xxx: add iscsi_transport capps for fw capacilities
Mike Christie [Wed, 30 May 2007 17:57:22 +0000]
[SCSI] qla4xxx: add iscsi_transport capps for fw capacilities

Userspace will want to know what the driver/FW/HW capabilites
when it comes to some operations like if the hardware can
do discovery or if it can store iscsi info like what target
was used for boot. This patch adds some new caps so userspace
can tell if the driver supports hardware/fw based sendtargets
discovery and if the hardware has some flash which may be
holding or can contain some iscsi target info
.
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi_tcp: remove DMA alignment restriction
Mike Christie [Wed, 30 May 2007 17:57:21 +0000]
[SCSI] iscsi_tcp: remove DMA alignment restriction

Add a slave_configure function to iSCSI TCP to remove any DMA
alignment restriction.  This permits the use of direct IO from
arbitrary addresses.

Signed-off-by: Pete Wyckoff <pw@osc.edu>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi_tcp: fix handling of data buffer padding
Mike Christie [Wed, 30 May 2007 17:57:20 +0000]
[SCSI] iscsi_tcp: fix handling of data buffer padding

If we got the padding, data and header in different skbs,
we were not handling the padding correctly because we attributed it
to the data's skb. This resulted in the initiator reading from
pad bytes + skb offset instead of the correct offset.

If you could not connect with the open solaris target, this
will fix the lock up problem you were hitting.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] libiscsi: make can_queue configurable
Mike Christie [Wed, 30 May 2007 17:57:19 +0000]
[SCSI] libiscsi: make can_queue configurable

This patch allows us to set can_queue and cmds_per_lun from userspace
when we create the session/host. From there we can set it on a per
target basis. The patch fully converts iscsi_tcp, but only hooks
up ib_iser for cmd_per_lun since it currently has a lots of preallocations
based on can_queue.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] libiscsi: fix iscsi cmdsn allocation
Mike Christie [Wed, 30 May 2007 17:57:18 +0000]
[SCSI] libiscsi: fix iscsi cmdsn allocation

The cmdsn allocation and pdu transmit code can race, and we can end
up sending a pdu with cmdsn 10 before a pdu with 5. The target will
then fail the connection/session. This patch fixes the problem by
delaying the cmdsn allocation until we are about to send the pdu.

This also removes the xmitmutex. We were using the connection xmitmutex
during error handling to handle races with mtask and ctask cleanup and
completion. For ctasks we now have nice refcounting and for the mtask,
if we hit the case where the mtask timesout and it is floating
around somewhere in the driver, we end up dropping the session.
And to handle session level cleanup, we use the xmit suspend bit
along with scsi_flush_queue and the session lock to make sure
that the xmit thread is not possibly transmitting a task while
we are trying to kill it.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi tcp: fix iscsi xmit state machine
Mike Christie [Wed, 30 May 2007 17:57:17 +0000]
[SCSI] iscsi tcp: fix iscsi xmit state machine

If iscsi_tcp partially sends a header, it would recalculate the
header size and readd the size of the digest (if header digests
are used).This would cause us to send sizeof(digest) extra bytes
when we sent the rest of the header.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi class, iscsi_tcp, ib_iser: add sysfs chap file
Mike Christie [Wed, 30 May 2007 17:57:16 +0000]
[SCSI] iscsi class, iscsi_tcp, ib_iser: add sysfs chap file

The attached patches add sysfs files for the chap settings
to the iscsi transport class, iscsi_tcp and ib_iser. This is
needed for software iscsi because there are times when iscsid
can die and it will need to reread the values it was using.
And it is needed by qla4xxx for basic management opertaions.
This patch does not hook in qla4xxx yet, because I am not sure
the mbx command to use.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi: Some fixes in preparation for bidirectional support - total_length
Mike Christie [Wed, 30 May 2007 17:57:15 +0000]
[SCSI] iscsi: Some fixes in preparation for bidirectional support - total_length

- Remove shadow of request length from struct iscsi_cmd_task.
- change all users to use scsi_cmnd->request_bufflen directly

(With bidi we will use scsi-ml API to retrieve in/out length)

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi: Some fixes in preparation for bidirectional support - exp_datasn
Mike Christie [Wed, 30 May 2007 17:57:14 +0000]
[SCSI] iscsi: Some fixes in preparation for bidirectional support - exp_datasn

This patch fixes handling of expected datasn/r2tsn as received from
target. It is done according to: T10 rfc3720 section 3.2.2.3. Data Sequencing.

. unify expected datasn/r2tsn into one counter
. calculate than check expected datasn/r2tsn. On error print a message
  and fail the request. (TODO use iscsi retransmits)
. remove the FIXME   ;)
. avoid zero length memset

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi class, qla4xxx, iscsi_tcp, ib_iser: export/set initiator name
Mike Christie [Wed, 30 May 2007 17:57:13 +0000]
[SCSI] iscsi class, qla4xxx, iscsi_tcp, ib_iser: export/set initiator name

For iscsi root boot, software iscsi needs to know what the BIOS/OF
initiator used for the initiator name so this puts it in sysfs
for userspace to be able to pick up.

For hw iscsi, it is nice to see what the card is using.

This patch adds the new param, and hooks in qla4xxx, iscsi_tcp, and ib_iser.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] libiscsi, iscsi_tcp, ib_iser : add sw iscsi host get/set params helpers
Mike Christie [Wed, 30 May 2007 17:57:12 +0000]
[SCSI] libiscsi, iscsi_tcp, ib_iser : add sw iscsi host get/set params helpers

iscsid and udev need to key off the hw address being
used so add some helpers for iser and iscsi tcp.

Also convert them

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: Roland Dreier <rdreier@cisco.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi class: add iscsi host set param event
Mike Christie [Wed, 30 May 2007 17:57:11 +0000]
[SCSI] iscsi class: add iscsi host set param event

The iscsi class uses the set_param event to set session
and connection params. This patch adds a set_host_param
so we can set host level values.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi_transport, qla4xxx: have class lookup host for drivers
Mike Christie [Wed, 30 May 2007 17:57:10 +0000]
[SCSI] iscsi_transport, qla4xxx: have class lookup host for drivers

We are going to be adding more host level sysfs attrs and
set_params, so this patch has them take a scsi_host instead
of either a scsi_host or host no.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla4xxx: export mac as hw address
Mike Christie [Wed, 30 May 2007 17:57:09 +0000]
[SCSI] qla4xxx: export mac as hw address

Export mac as hw address.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Cc: David C Somayajulu <david.somayajulu@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi_transport: export hw address
Mike Christie [Wed, 30 May 2007 17:57:08 +0000]
[SCSI] iscsi_transport: export hw address

Add hw address sysfs file.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] iscsi_transport: Check iscsi interface skb allocation return value
Mike Christie [Wed, 30 May 2007 17:57:07 +0000]
[SCSI] iscsi_transport: Check iscsi interface skb allocation return value

Let's not oops when we cannot allocate a skb! Add a check
for if alloc_skb fails.

Signed-off-by: Mike Christie <michaelc@cs.wisc.edu>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] aacraid: Changeable queue depth
Salyzyn, Mark [Wed, 30 May 2007 14:01:14 +0000]
[SCSI] aacraid: Changeable queue depth

Inspired by Brian King's patch to the ibmvscsi driver. Adds support for
a changeable queue depth to the aacraid driver.

Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] megaraid: convert to use the data buffer accessors
FUJITA Tomonori [Mon, 14 May 2007 11:13:44 +0000]
[SCSI] megaraid: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] megaraid_sas: convert to use the data buffer accessors
FUJITA Tomonori [Fri, 25 May 2007 20:04:08 +0000]
[SCSI] megaraid_sas: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] megaraid_old: convert to use the data buffer accessors
FUJITA Tomonori [Mon, 14 May 2007 11:17:27 +0000]
[SCSI] megaraid_old: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Sumant Patro <sumant.patro@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] esp: use shost_priv
Christoph Hellwig [Thu, 31 May 2007 18:12:32 +0000]
[SCSI] esp: use shost_priv

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] introduce shost_priv helper
Christoph Hellwig [Thu, 31 May 2007 18:12:26 +0000]
[SCSI] introduce shost_priv helper

Currently accessing the scsi host private data is rather messy because
it comes as an unsigned long that always needs a cast first.  This patch
introduces a helper that does the cast called shost_priv.  It's similar
in spirit to netdev_priv for network drivers.

This is the first patch introducing the macro, and the second patch
in the series will convert esp and it's subdrivers as an example.
Further conversion will wait until the helper is in the tree to make
patch juggling easier.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] dpt_i2o: convert to use the data buffer accessors
FUJITA Tomonori [Fri, 25 May 2007 17:08:10 +0000]
[SCSI] dpt_i2o: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>

ACK. Code inspected. Driver changes NOT unit tested or compile tested.
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

12 years ago[SCSI] qla2xxx: convert to use the data buffer accessors
FUJITA Tomonori [Fri, 25 May 2007 16:55:38 +0000]
[SCSI] qla2xxx: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>