11 years agoblock: move header for /proc/partitions to seq_start
Greg Kroah-Hartman [Thu, 22 May 2008 21:21:08 +0000]
block: move header for /proc/partitions to seq_start

The seq_start call is the better place for the header for the file, that
way we don't have to be mucking in the class structure to try to figure
out if this is the first partition or not.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoblock: make proc files seq_start use the class_find_device()
Greg Kroah-Hartman [Thu, 22 May 2008 21:21:08 +0000]
block: make proc files seq_start use the class_find_device()

Use the proper class iterator function instead of mucking around in the
internals of the class structures.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoblock: make /proc/diskstats only build if CONFIG_PROC_FS is enabled
Randy Dunlap [Fri, 23 May 2008 16:44:11 +0000]
block: make /proc/diskstats only build if CONFIG_PROC_FS is enabled

These functions are only needed if CONFIG_PROC_FS is enabled, so save
the space when it is not.

This also makes it easier for a patch later in this series to work
properly if CONFIG_PROC_FS is not enabled.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoblock: make blk_lookup_devt use the class iterator function
Greg Kroah-Hartman [Thu, 22 May 2008 21:21:08 +0000]
block: make blk_lookup_devt use the class iterator function

Use the proper class iterator function instead of mucking around in the
internals of the class structures.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoblock: make printk_partition use the class iterator function
Greg Kroah-Hartman [Thu, 22 May 2008 21:21:08 +0000]
block: make printk_partition use the class iterator function

Use the proper class iterator function instead of mucking around in the
internals of the class structures.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoblock: fix compiler warning in genhd.c
Greg Kroah-Hartman [Thu, 22 May 2008 21:21:08 +0000]
block: fix compiler warning in genhd.c

Warn if something really bad happens if we can't create this link.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoDriver Core: add ability for class_find_device to start in middle of list
Greg Kroah-Hartman [Thu, 22 May 2008 21:21:08 +0000]
Driver Core: add ability for class_find_device to start in middle of list

This mirrors the functionality that driver_find_device has as well.

We add a start variable, and all callers of the function are fixed up at
the same time.

The block layer will be using this new functionality in a follow-on
patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoDriver Core: add ability for class_for_each_device to start in middle of list
Greg Kroah-Hartman [Thu, 22 May 2008 21:21:08 +0000]
Driver Core: add ability for class_for_each_device to start in middle of list

This mirrors the functionality that driver_for_each_device has as well.

We add a start variable, and all callers of the function are fixed up at
the same time.

The block layer will be using this new functionality in a follow-on
patch.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: convert device_create_drvdata to device_create
Greg Kroah-Hartman [Tue, 22 Jul 2008 03:03:34 +0000]
device create: convert device_create_drvdata to device_create

Now that device_create() has been audited, rename things back to the
original call to be sane.

Keep the device_create_drvdata macro around to make merges easier.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodriver core: remove device_create()
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
driver core: remove device_create()

There are no more users of this, and it is racy.  Use
device_create_drvdata() or device_create_vargs() instead.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: x86: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: x86: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: usb: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: usb: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: spi: convert device_create to device_create_drvdata
David Brownell [Fri, 6 Jun 2008 20:48:07 +0000]
device create: spi: convert device_create to device_create_drvdata

Switch over to use the shiny new device_create_drvdata() call
instead of the original device_create() calls, so this continues
to work after device_create() is  removed.

Note that this driver never had the race which motivated removing
the original call; it locked correctly.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: sound: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: sound: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: scsi: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: scsi: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: s390: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: s390: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: net: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: net: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: mtd: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: mtd: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: misc: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: misc: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: mips: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: mips: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: macintosh: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: macintosh: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: isdn: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: isdn: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Karsten Keil <kkeil@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: infiniband: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: infiniband: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: ieee1394: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: ieee1394: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Ben Collins <ben.collins@ubuntu.com>
Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: ide: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: ide: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: i2c: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: i2c: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: hwmon: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: hwmon: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Mark M. Hoffman <mhoffman@lightlink.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: hid: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: hid: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: framebuffer: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: framebuffer: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: dvb: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: dvb: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: dca: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: dca: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: coda: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: coda: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: char: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: char: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodevice create: block: convert device_create to device_create_drvdata
Greg Kroah-Hartman [Wed, 21 May 2008 19:52:33 +0000]
device create: block: convert device_create to device_create_drvdata

device_create() is race-prone, so use the race-free
device_create_drvdata() instead as device_create() is going away.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoFirmware: fix typo in example code
Greg Kroah-Hartman [Wed, 21 May 2008 22:21:38 +0000]
Firmware: fix typo in example code

It's not like this stuff even builds right now, but this will make
Randy's scripts happy :)

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agodebugfs: Add a reference to the debugfs API documentation.
Robert P. J. Day [Mon, 19 May 2008 22:06:00 +0000]
debugfs: Add a reference to the debugfs API documentation.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Cc: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agokobject: replace '/' with '!' in name
Kay Sievers [Tue, 6 May 2008 20:24:04 +0000]
kobject: replace '/' with '!' in name

Some (block) devices have a '/' in the name, and need special
handling. Let's have that rule to the core, so we can remove it
from the block class.

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agosysfs: add /sys/dev/{char,block} to lookup sysfs path by major:minor
Dan Williams [Mon, 21 Apr 2008 17:51:07 +0000]
sysfs: add /sys/dev/{char,block} to lookup sysfs path by major:minor

Why?:
There are occasions where userspace would like to access sysfs
attributes for a device but it may not know how sysfs has named the
device or the path.  For example what is the sysfs path for
/dev/disk/by-id/ata-ST3160827AS_5MT004CK?  With this change a call to
stat(2) returns the major:minor then userspace can see that
/sys/dev/block/8:32 links to /sys/block/sdc.

What are the alternatives?:
1/ Add an ioctl to return the path: Doable, but sysfs is meant to reduce
   the need to proliferate ioctl interfaces into the kernel, so this
   seems counter productive.

2/ Use udev to create these symlinks: Also doable, but it adds a
   udev dependency to utilities that might be running in a limited
   environment like an initramfs.

3/ Do a full-tree search of sysfs.

[kay.sievers@vrfy.org: fix duplicate registrations]
[kay.sievers@vrfy.org: cleanup suggestions]

Cc: Neil Brown <neilb@suse.de>
Cc: Tejun Heo <htejun@gmail.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Reviewed-by: SL Baur <steve@xemacs.org>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Acked-by: Mark Lord <lkml@rtr.ca>
Acked-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Mon, 21 Jul 2008 22:42:20 +0000]
Merge git://git./linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (100 commits)
  usb-storage: revert DMA-alignment change for Wireless USB
  USB: use reset_resume when normal resume fails
  usb_gadget: composite cdc gadget fault handling
  usb gadget: minor USBCV fix for composite framework
  USB: Fix bug with byte order in isp116x-hcd.c fio write/read
  USB: fix double kfree in ipaq in error case
  USB: fix build error in cdc-acm for CONFIG_PM=n
  USB: remove board-specific UP2OCR configuration from pxa27x-udc
  USB: EHCI: Reconciling USB register differences on MPC85xx vs MPC83xx
  USB: Fix pointer/int cast in USB devio code
  usb gadget: g_cdc dependso on NET
  USB: Au1xxx-usb: suspend/resume support.
  USB: Au1xxx-usb: clean up ohci/ehci bus glue sources.
  usbfs: don't store bad pointers in registration
  usbfs: fix race between open and unregister
  usbfs: simplify the lookup-by-minor routines
  usbfs: send disconnect signals when device is unregistered
  USB: Force unbinding of drivers lacking reset_resume or other methods
  USB: ohci-pnx4008: I2C cleanups and fixes
  USB: debug port converter does not accept more than 8 byte packets
  ...

11 years agousb-storage: revert DMA-alignment change for Wireless USB
Alan Stern [Mon, 30 Jun 2008 17:39:59 +0000]
usb-storage: revert DMA-alignment change for Wireless USB

This patch (as1110) reverts an earlier patch meant to help with
Wireless USB host controllers.  These controllers can have bulk
maxpacket values larger than 512, which puts unusual constraints on
the sizes of scatter-gather list elements.  However it turns out that
the block layer does not provide the support we need to enforce these
constraints; merely changing the DMA alignment mask doesn't help.
Hence there's no reason to keep the original patch.  The Wireless USB
problem will have to be solved a different way.

In addition, there is a reason to get rid of the earlier patch.  By
dereferencing a pointer stored in the ep_in array of struct
usb_device, the current code risks an invalid memory access when it
runs concurrently with device removal.  The members of that array are
cleared before the driver's disconnect method is called, so it should
not try to use them.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: use reset_resume when normal resume fails
Alan Stern [Mon, 30 Jun 2008 15:14:43 +0000]
USB: use reset_resume when normal resume fails

This patch (as1109b) makes USB-Persist more resilient to errors.  With
the current code, if a normal resume fails, it's an unrecoverable
error.  With the patch, if a normal resume fails (and if the device is
enabled for USB-Persist) then a reset-resume is tried.

This fixes the problem reported in Bugzilla #10977.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb_gadget: composite cdc gadget fault handling
David Brownell [Tue, 1 Jul 2008 20:18:20 +0000]
usb_gadget: composite cdc gadget fault handling

These two fixes ensure the new "CDC Composite Device" gadget
fails cleanly when it's loaded on hardware that can't support
this particular gadget driver.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb gadget: minor USBCV fix for composite framework
David Lopo [Tue, 1 Jul 2008 20:14:17 +0000]
usb gadget: minor USBCV fix for composite framework

Fill in a reserved/unused device qualifier field to ensure that
the USBCV tests will always pass.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: Fix bug with byte order in isp116x-hcd.c fio write/read
Julien May [Fri, 27 Jun 2008 13:01:18 +0000]
USB: Fix bug with byte order in isp116x-hcd.c fio write/read

URB payload data are transfered in wrong byte order on a big endinan
architecture (AVR32).

Signed-off-by: Julien May <mailinglist@miromico.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: fix double kfree in ipaq in error case
Oliver Neukum [Mon, 30 Jun 2008 12:33:57 +0000]
USB: fix double kfree in ipaq in error case

in the error case the ipaq driver leaves a dangling pointer to already
freed memory that will be freed again.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: fix build error in cdc-acm for CONFIG_PM=n
Oliver Neukum [Tue, 1 Jul 2008 17:10:08 +0000]
USB: fix build error in cdc-acm for CONFIG_PM=n

Here's the fix. cdc-wdm has the same problem. The fix is the same.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: remove board-specific UP2OCR configuration from pxa27x-udc
Daniel Ribeiro [Wed, 2 Jul 2008 02:09:27 +0000]
USB: remove board-specific UP2OCR configuration from pxa27x-udc

Remove the board-specific UP2OCR configuration from the
pxa27x-udc driver.

Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: EHCI: Reconciling USB register differences on MPC85xx vs MPC83xx
Srikanth Srinivasan [Wed, 2 Jul 2008 07:14:33 +0000]
USB: EHCI: Reconciling USB register differences on MPC85xx vs MPC83xx

A couple of USB register initializations had to be changed on MPC85xx
platforms.  This is due to the internal SoC buses being different on
MPC83xx SoCs vs MPC85xx SoCs.

We currently handle this via an ifdef since 83xx and 85xx are mutually
exclusive kernel builds.

Signed-off-by: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: Fix pointer/int cast in USB devio code
David Howells [Wed, 2 Jul 2008 11:28:55 +0000]
USB: Fix pointer/int cast in USB devio code

Fix pointer/int cast in USB devio code, and thus avoid a compiler warning.

A void* data argument passed to bus_find_device() and thence to match_devt()
is used to carry a 32-bit datum.  However, casting directly between a u32 and
a pointer is not permitted - there must be an intermediate cast via (unsigned)
long.

This was introduced by the following patch:

commit 94b1c9fa060ece2c8f080583beb6cc6008e41413
Author: Alan Stern <stern@rowland.harvard.edu>
Date:   Tue Jun 24 14:47:12 2008 -0400

    usbfs: simplify the lookup-by-minor routines

    This patch (as1105) simplifies the lookup-by-minor-number code in
    usbfs.  Instead of passing the minor number to the callback, which
    must then reconstruct the entire dev_t value, the patch passes the
    dev_t value directly.

    Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
    Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb gadget: g_cdc dependso on NET
Randy Dunlap [Thu, 3 Jul 2008 21:44:59 +0000]
usb gadget: g_cdc dependso on NET

g_cdc needs to depend on NET, otherwise net-related build errors happen:

ERROR: "netif_carrier_on" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "netif_carrier_off" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "netif_rx" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "alloc_etherdev_mq" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "free_netdev" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "register_netdev" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "print_mac" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "dev_kfree_skb_any" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "__alloc_skb" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "eth_type_trans" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "unregister_netdev" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "__netif_schedule" [drivers/usb/gadget/g_cdc.ko] undefined!
ERROR: "skb_put" [drivers/usb/gadget/g_cdc.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: Au1xxx-usb: suspend/resume support.
Manuel Lauss [Mon, 23 Jun 2008 07:09:37 +0000]
USB: Au1xxx-usb: suspend/resume support.

Copy the OHCI/EHCI PM callbacks of the PCI implementation since
they work equally well on Au1xxx hardware.

Tested on Au1200.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: Au1xxx-usb: clean up ohci/ehci bus glue sources.
Manuel Lauss [Mon, 23 Jun 2008 07:08:29 +0000]
USB: Au1xxx-usb: clean up ohci/ehci bus glue sources.

- Fold multiple probe/remove callbacks into one function;
- minor style fixes, no functional changes.

Tested on Au1200.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousbfs: don't store bad pointers in registration
Alan Stern [Tue, 24 Jun 2008 18:47:29 +0000]
usbfs: don't store bad pointers in registration

This patch (as1107) fixes a small bug in the usbfs registration and
unregistration code.  It avoids leaving an error value stored in the
device's usb_classdev field and it avoids trying to unregister a NULL
pointer.  (It also fixes a rather extreme overuse of whitespace.)

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousbfs: fix race between open and unregister
Alan Stern [Tue, 24 Jun 2008 18:47:19 +0000]
usbfs: fix race between open and unregister

This patch (as1106) fixes a race between opening and unregistering
device files in usbfs.  The current code drops its reference to the
device and then reacquires it, ignoring the possibility that the
device structure might have been removed in the meantime.  It also
doesn't check whether the device is already in the NOTATTACHED state
when the file is opened.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousbfs: simplify the lookup-by-minor routines
Alan Stern [Tue, 24 Jun 2008 18:47:12 +0000]
usbfs: simplify the lookup-by-minor routines

This patch (as1105) simplifies the lookup-by-minor-number code in
usbfs.  Instead of passing the minor number to the callback, which
must then reconstruct the entire dev_t value, the patch passes the
dev_t value directly.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousbfs: send disconnect signals when device is unregistered
Alan Stern [Tue, 24 Jun 2008 18:47:04 +0000]
usbfs: send disconnect signals when device is unregistered

USB device files are accessible in two ways: as files in usbfs and as
character device nodes.  The two paths are supposed to behave
identically, but they don't.  When the underlying USB device is
unplugged, disconnect signals are sent to processes with open usbfs
files (if they requested these signals) but not to processes with open
device node files.

This patch (as1104) fixes the bug by moving the disconnect-signalling
code into a common subroutine which is called from both paths.
Putting this subroutine in devio.c removes the only out-of-file
reference to struct dev_state, and so the structure's declaration can
be moved from usb.h into devio.c.

Finally, the new subroutine performs one extra action: It kills all
the outstanding async URBs.  (I'd kill the outstanding synchronous
URBs too, if there was any way to do it.)  In the past this hasn't
mattered much, because devices were unregistered from usbfs only
when they were disconnected.  But now the unregistration can also
occur whenever devices are unbound from the usb_generic driver.  At
any rate, killing URBs when a device is unregistered from usbfs seems
like a good thing to do.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: Force unbinding of drivers lacking reset_resume or other methods
Alan Stern [Mon, 23 Jun 2008 20:00:40 +0000]
USB: Force unbinding of drivers lacking reset_resume or other methods

This patch (as1024) takes care of a FIXME issue: Drivers that don't
have the necessary suspend, resume, reset_resume, pre_reset, or
post_reset methods will be unbound and their interface reprobed when
one of the unsupported events occurs.

This is made slightly more difficult by the fact that bind operations
won't work during a system sleep transition.  So instead the code has
to defer the operation until the transition ends.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: ohci-pnx4008: I2C cleanups and fixes
Jean Delvare [Wed, 18 Jun 2008 12:46:27 +0000]
USB: ohci-pnx4008: I2C cleanups and fixes

Various cleanups and fixes to the i2c code in ohci-pnx4008:
* Delete empty isp1301_command. The i2c driver command implementation
  is optional, so there's no point in providing an empty
  implementation.
* Give a name to isp1301_driver. I'm surprised that i2c-core accepted
  to register this driver at all. I've chosen "isp1301_pnx" as the
  name, because it's not a generic ISP1301 driver (much like the
  isp1301_omap driver.) We might want to make the name even more
  specific (but "isp1301_ohci_pnx4008" doesn't fit.)
* The ISP1301 is definitely not a hardware monitoring device.
* Fix a memory leak on failure in isp1301_attach. If
  i2c_attach_client fails, the client is not registered so
  isp1301_detach is never called and the i2c_client memory is lost.
* Use strlcpy instead of strcpy.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Vitaly Wool <vitalywool@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: debug port converter does not accept more than 8 byte packets
Aleksey Gorelov [Thu, 19 Jun 2008 22:22:17 +0000]
USB: debug port converter does not accept more than 8 byte packets

USB debug port only supports 8 byte rx/tx packets. Although spec implies that
"if a packet larger than eight bytes is received from the remote computer, the
device must break the larger packet into eight-byte packets before sending the
data to the Debug Port", the real PLX NET20DC device does not handle it right -
data is corrupted on debug port end if serial interface sends >8 byte urbs.
Patch below fixes the issue by limiting tx urb to 8 byte.

Signed off by: Aleks Gorelov <dared1st@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: fix disconnect bug in cdc-acm
Oliver Neukum [Wed, 25 Jun 2008 12:17:16 +0000]
USB: fix disconnect bug in cdc-acm

cdc-acm must give up secondary interfaces if the primary is disconnected
and vice versa. This wasn't done correctly.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: fix usb serial pm counter decrement for disconnected interfaces
Oliver Neukum [Wed, 25 Jun 2008 11:32:49 +0000]
USB: fix usb serial pm counter decrement for disconnected interfaces

usb serial decrements the pm counter even if an interface has been
disconnected. If it was a logical disconnect the interface may belong
already to another driver. This patch introduces a check for disconnected
interfaces.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: autosuspend for cdc-wdm
Oliver Neukum [Tue, 24 Jun 2008 13:56:10 +0000]
USB: autosuspend for cdc-wdm

this patch implements

- suspend/resume
- aggressive autosuspend for the cdc-wdm driver
- pre/post_reset

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: additional power savings for cdc-acm devices that support remote wakeup
Oliver Neukum [Fri, 20 Jun 2008 09:25:57 +0000]
USB: additional power savings for cdc-acm devices that support remote wakeup

this patch saves power for cdc-acm devices that support remote wakeup
while the device is connected.

- request needs_remote_wakeup when needed
- delayed write while a device is autoresumed
- the device is marked busy when appropriate

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: keyspan: Remove duplicate device entries
Ben Collins [Fri, 27 Jun 2008 00:08:16 +0000]
USB: keyspan: Remove duplicate device entries

The 28xb, as documented in comments, has the same ID's as the 28x.
Remove the duplicated ID's from the device tables, and expand the
comment to document this.

Signed-off-by: Ben Collins <ben.collins@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb: fix uninitialized variable warning in keyspan_pda
Benny Halevy [Fri, 27 Jun 2008 09:22:32 +0000]
usb: fix uninitialized variable warning in keyspan_pda

This fixes the compiler warning.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb: r8a66597-hcd: fix iinterval for Full/Low speed device
Yoshihiro Shimoda [Fri, 27 Jun 2008 10:09:58 +0000]
usb: r8a66597-hcd: fix iinterval for Full/Low speed device

fix interrupt transfer interval for Full/Low speed device.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb: r8a66597-hcd: fix interrupt trigger
Yoshihiro Shimoda [Fri, 27 Jun 2008 10:09:55 +0000]
usb: r8a66597-hcd: fix interrupt trigger

fix the problem that did not set IRQF_TRIGGER_ flag.

Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: fix usb_reset_device and usb_reset_composite_device(take 3)
Ming Lei [Wed, 18 Jun 2008 14:00:29 +0000]
USB: fix usb_reset_device and usb_reset_composite_device(take 3)

This patch renames the existing usb_reset_device in hub.c to
usb_reset_and_verify_device and renames the existing
usb_reset_composite_device to usb_reset_device. Also the new
usb_reset_and_verify_device does't need to be EXPORTED .

The idea of the patch is that external interface driver
should warn the other interfaces' driver of the same
device before and after reseting the usb device. One interface
driver shoud call _old_ usb_reset_composite_device instead of
_old_ usb_reset_device since it can't assume the device contains
only one interface. The _old_ usb_reset_composite_device
is safe for single interface device also. we rename the two
functions to make the change easily.

This patch is under guideline from Alan Stern.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>

11 years agoUSB: usb-serial: fix a sparse warning about different signedness
Andre Haupt [Wed, 18 Jun 2008 13:56:00 +0000]
USB: usb-serial: fix a sparse warning about different signedness

fix the following sparse warning:

drivers/usb/serial/usb-serial.c:927:43: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/usb-serial.c:927:43:    expected unsigned int *minor
drivers/usb/serial/usb-serial.c:927:43:    got int *<noident>
  CHECK   drivers/usb/serial/generic.c

Signed-off-by: Andre Haupt <andre@bitwigglers.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: isp1760: Support board-specific hardware configurations
Nate Case [Tue, 17 Jun 2008 16:11:38 +0000]
USB: isp1760: Support board-specific hardware configurations

This adds support for hardware configurations that don't match the
chip default register settings (e.g., 16-bit data bus, DACK and
DREQ pulled up instead of down, analog overcurrent mode).

These settings are passed in via the OF device tree.  The PCI
interface still assumes the same default values.

Signed-off-by: Nate Case <ncase@xes-inc.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: fix comment of usb_set_configuration
Ming Lei [Tue, 17 Jun 2008 15:24:08 +0000]
USB: fix comment of usb_set_configuration

It is the usb interface driver probe() methods that
can't call usb_set_configuration, not usb device driver.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: use standard SG iterator in the scatter-gather library
Alan Stern [Mon, 16 Jun 2008 16:11:39 +0000]
USB: use standard SG iterator in the scatter-gather library

This patch (as1103) changes the iteration in the USB scatter-gather to
use a standard SG iterator.  Otherwise the iteration will fail if it
encounters a chained SG list.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: remove interface parameter of usb_reset_composite_device
Ming Lei [Sun, 15 Jun 2008 01:42:02 +0000]
USB: remove interface parameter of usb_reset_composite_device

From the current implementation of usb_reset_composite_device
function, the iface parameter is no longer useful. This function
doesn't do something special for the iface usb_interface,compared
with other interfaces in the usb_device. So remove the parameter
and fix the related caller.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: AccessRunner: avoid unnecessary memset
Christophe Jaillet [Mon, 9 Jun 2008 23:39:53 +0000]
USB: AccessRunner: avoid unnecessary memset

Remove an explicit memset(.., 0, ...) to a variable allocated with kzalloc
(i.e.  'card_info' array of the structure 'instance').

Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: drivers/usb/host/isp1760-hcd.c: processor flags have type `unsigned long'
Andrew Morton [Mon, 9 Jun 2008 23:39:52 +0000]
USB: drivers/usb/host/isp1760-hcd.c: processor flags have type `unsigned long'

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: cdc-wdm cleanup
Oliver Neukum [Thu, 19 Jun 2008 12:20:18 +0000]
USB: cdc-wdm cleanup

- fixes an error with filling out control requests
- increases grepability and error logging
- fixes the short read code path

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: delete airprime driver
Greg Kroah-Hartman [Thu, 19 Jun 2008 18:21:16 +0000]
USB: delete airprime driver

This driver is only for one device id, and the option driver should be
used instead for it.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: usbmon: use simple_read_from_buffer()
Akinobu Mita [Mon, 9 Jun 2008 23:39:57 +0000]
USB: usbmon: use simple_read_from_buffer()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: uhci: mark root_hub_hub_des[] as const
Ming Lei [Sun, 8 Jun 2008 08:44:40 +0000]
USB: uhci: mark root_hub_hub_des[] as const

mark this array as const because it is read-only

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: host: mark const variable tables as "const"
Ming Lei [Sun, 8 Jun 2008 08:13:03 +0000]
USB: host: mark const variable tables as "const"

Mark the tables as const so that they end up in .rodata
section and don't cacheline share with things that get
written to.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB Gadget: documentation update
Alan Stern [Mon, 2 Jun 2008 20:26:48 +0000]
USB Gadget: documentation update

This patch (as1102) clarifies two points in the USB Gadget kerneldoc:

Request completion callbacks are always made with interrupts
disabled;

Device controllers may not support STALLing the status stage
of a control transfer after the data stage is over.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb: irda: cleanup on ir-usb module
Felipe Balbi [Tue, 3 Jun 2008 11:47:52 +0000]
usb: irda: cleanup on ir-usb module

General cleanup on ir-usb module. Introduced
a common header that could be used also on
usb gadget framework.

Lot's of cleanups and now using macros from the header
file.

Signed-off-by: Felipe Balbi <me@felipebalbi.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: ehci-hcd unlink speedups
David Brownell [Wed, 4 Jun 2008 05:21:55 +0000]
USB: ehci-hcd unlink speedups

This patch fixes some performance bugs observed with some workloads
when unlinking EHCI queue header (QH) descriptors from the async ring
(control/bulk schedule).

The mechanism intended to defer unlinking an empty QH (so there is no
penalty in common cases where it's quickly reused) was not working as
intended.  Sometimes the unlink was scheduled:

 - too quickly ... which can be a *strong* negative effect, since
   that QH becomes unavailable for immediate re-use;

 - too slowly ... wasting DMA cycles, usually a minor issue except
   for increased bus contention and power usage;

Plus there was an extreme case of "too slowly":  a logical error in the
IAA watchdog-timer conversion meant that sometimes the unlink never
got scheduled.

The fix replaces a simple counter with a timestamp derived from the
controller's 8 KHz microframe counter, and adjusts the timer usage
for some issues associated with HZ being less than 8K.

(Based on a patch originally by Alan Stern, and good troubleshooting
from  Leonid.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Leonid <leonidv11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb: hub: add check for unsupported bus topology
Felipe Balbi [Thu, 12 Jun 2008 07:49:47 +0000]
usb: hub: add check for unsupported bus topology

We can't allow hubs on the 7th tier as they would allow
devices on the 8th tier.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: ohci_hcd hang: submit vs. rmmod race
Pete Zaitcev [Mon, 2 Jun 2008 04:23:07 +0000]
USB: ohci_hcd hang: submit vs. rmmod race

If we do rmmod ohci_hcd while an application is doing something, the
following may happen:

- a control URB completes (in finish_urb) and the ohci's endpoint is
  set into ED_UNLINK in ed_deschedule
- same URB is (re)submitted because of the open/close loop or other
  such application behaviour
- rmmod sets the state to HC_STATE_QUESCING
- finish_unlinks happens at next SOF; normally it would set ed into
  ED_IDLE and immediately call ed_schedule (since URB had extra TDs
  queued), which sets it into ED_OPER. But the check in ed_schedule
  makes it fail with -EAGAIN (which is ignored)
- from now on we have a dead URB stuck; it cannot even be unlinked
  because the ed status is not ED_OPER, and thus start_ed_unlink is
  not invoked.

This patch removes the check. In 2.6.25, all callers check for
__ACTIVE bit before invoking ed_schedule, which is more appropriate.

Alan Stern and David Brownell approved of this (cautiously).

Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: make SA1111 OHCI driver SA11x0 specific
Eric Miao [Mon, 2 Jun 2008 02:05:30 +0000]
USB: make SA1111 OHCI driver SA11x0 specific

As RMK pointed out,  considering the fact that the _only_ platform with
a PXA and SA1111 is the Lubbock, and that SA1111 DMA doesn't work there,
(i.e. the SA1111 OHCI doesn't work there) the SA1111 OHCI driver should
really be made SA11x0 specific.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: missing usb_put_hcd to ohci-at91
Pete Zaitcev [Sun, 1 Jun 2008 21:38:43 +0000]
USB: missing usb_put_hcd to ohci-at91

Looks like usb_put_hcd was missing. Also, make an always-zero function
return void.

Signed-off-by: Pete Zaitcev <zaitcev@yahoo.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: speedtch.c fix sparse shadowed variable warning
Harvey Harrison [Fri, 30 May 2008 17:39:04 +0000]
USB: speedtch.c fix sparse shadowed variable warning

i is used only as a for-loop index no need to declare another.
drivers/usb/atm/speedtch.c:832:7: warning: symbol 'i' shadows an earlier one
drivers/usb/atm/speedtch.c:766:6: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: cp2101.c fix sparse signedness mismatch warnings
Harvey Harrison [Fri, 30 May 2008 17:29:55 +0000]
USB: cp2101.c fix sparse signedness mismatch warnings

The get/set 2101_config helpers take an unsigned int rather than an
int.  It is safe to change these in each case and may even produce
better code as it will be an unsigned divide rather than a signed
divide in places.  All other manipulation was setting/masking bits
which will not be affected by the sign change.

Fixes the following sparse warnings:
drivers/usb/serial/cp2101.c:378:44: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:378:44:    expected unsigned int *data
drivers/usb/serial/cp2101.c:378:44:    got int *<noident>
drivers/usb/serial/cp2101.c:388:40: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:388:40:    expected unsigned int *data
drivers/usb/serial/cp2101.c:388:40:    got int *<noident>
drivers/usb/serial/cp2101.c:413:42: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:413:42:    expected unsigned int *data
drivers/usb/serial/cp2101.c:413:42:    got int *<noident>
drivers/usb/serial/cp2101.c:421:42: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:421:42:    expected unsigned int *data
drivers/usb/serial/cp2101.c:421:42:    got int *<noident>
drivers/usb/serial/cp2101.c:444:42: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:444:42:    expected unsigned int *data
drivers/usb/serial/cp2101.c:444:42:    got int *<noident>
drivers/usb/serial/cp2101.c:451:42: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:451:42:    expected unsigned int *data
drivers/usb/serial/cp2101.c:451:42:    got int *<noident>
drivers/usb/serial/cp2101.c:458:42: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:458:42:    expected unsigned int *data
drivers/usb/serial/cp2101.c:458:42:    got int *<noident>
drivers/usb/serial/cp2101.c:471:42: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:471:42:    expected unsigned int *data
drivers/usb/serial/cp2101.c:471:42:    got int *<noident>
drivers/usb/serial/cp2101.c:481:42: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:481:42:    expected unsigned int *data
drivers/usb/serial/cp2101.c:481:42:    got int *<noident>
drivers/usb/serial/cp2101.c:561:41: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:561:41:    expected unsigned int *data
drivers/usb/serial/cp2101.c:561:41:    got int *<noident>
drivers/usb/serial/cp2101.c:591:45: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:591:45:    expected unsigned int *data
drivers/usb/serial/cp2101.c:591:45:    got int *<noident>
drivers/usb/serial/cp2101.c:597:41: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:597:41:    expected unsigned int *data
drivers/usb/serial/cp2101.c:597:41:    got int *<noident>
drivers/usb/serial/cp2101.c:608:45: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:608:45:    expected unsigned int *data
drivers/usb/serial/cp2101.c:608:45:    got int *<noident>
drivers/usb/serial/cp2101.c:614:41: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:614:41:    expected unsigned int *data
drivers/usb/serial/cp2101.c:614:41:    got int *<noident>
drivers/usb/serial/cp2101.c:623:45: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:623:45:    expected unsigned int *data
drivers/usb/serial/cp2101.c:623:45:    got int *<noident>
drivers/usb/serial/cp2101.c:680:50: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:680:50:    expected unsigned int *data
drivers/usb/serial/cp2101.c:680:50:    got int *<noident>
drivers/usb/serial/cp2101.c:690:43: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:690:43:    expected unsigned int *data
drivers/usb/serial/cp2101.c:690:43:    got int *<noident>
drivers/usb/serial/cp2101.c:715:41: warning: incorrect type in argument 3 (different signedness)
drivers/usb/serial/cp2101.c:715:41:    expected unsigned int *data
drivers/usb/serial/cp2101.c:715:41:    got int *<noident>

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: digi_accelport.c trivial sparse lock annotation
Harvey Harrison [Fri, 30 May 2008 17:18:53 +0000]
USB: digi_accelport.c trivial sparse lock annotation

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: ohci-ppc-of: use linux/of_platform.h instead of asm
Stephen Rothwell [Fri, 23 May 2008 06:37:58 +0000]
USB: ohci-ppc-of: use linux/of_platform.h instead of asm

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: sisusb: Push down the BKL
Alan Cox [Thu, 22 May 2008 21:48:48 +0000]
USB: sisusb: Push down the BKL

This is another case where the lock_kernel appears to be unneccessary and
could be removed with a bit more investigative work

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: rio100: Push down the BKL
Alan Cox [Thu, 22 May 2008 21:47:31 +0000]
USB: rio100: Push down the BKL

The BKL is actually probably not needed as the mutex seems sufficient. If
so then a further patch to drop it would be a good followup.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: auerwald: Push down the BKL into the driver
Alan Cox [Thu, 22 May 2008 21:46:25 +0000]
USB: auerwald: Push down the BKL into the driver

Also fix the unknown ioctl return code

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: iowarrior: Push down BKL
Alan Cox [Thu, 22 May 2008 21:06:02 +0000]
USB: iowarrior: Push down BKL

I'm pretty sure the mutex is sufficient for all locking but will come
back to that later if the USB folks don't beat me to it. For now get rid
of the old BKL ioctl method and wrap the ioctl handler

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: usblcd: Push down BKL into driver
Alan Cox [Thu, 22 May 2008 21:07:51 +0000]
USB: usblcd: Push down BKL into driver

I'm pretty sure this can be eliminated however I couldn't prove (or find)
what stopped the device vanishing mid IOCTL_GET_HARD_VERSION. Perhaps a
USB wizard could double check that and see if the lock_kernel can go
entirely.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: ftdi_usb: Eliminate ioctl and BKL ioctl use
Alan Cox [Thu, 22 May 2008 21:04:48 +0000]
USB: ftdi_usb: Eliminate ioctl and BKL ioctl use

ftdi has one ioctl, which is buggy and for debugging. Kill it off

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agoUSB: gadget: Push BKL down into drivers
Alan Cox [Thu, 22 May 2008 21:03:27 +0000]
USB: gadget: Push BKL down into drivers

This keeps the gadget ioctl method wrapped but pushes the BKL down into
the gadget code so we can use unlocked_ioctl().

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb ethernet gadget: use composite gadget framework
David Brownell [Fri, 20 Jun 2008 01:20:11 +0000]
usb ethernet gadget: use composite gadget framework

Building on the previous patches which took code from this driver and
pakaged it in more-reusable network "function" components, this patch
gets rid of the original code and uses those components instead.

As seen with the other gadget driver conversions, the resulting code
is much easier to understand and (presumably) work with.  In this case
that's especially true, since the Ethernet gadget had grown to handle
three (!) different Ethernet-over-USB protocols.  This modularization
should make it much easier to add a fourth option for the newish CDC
"Ethernet Emulation Model" (or EEM).

Lightly tested, primarily at full speed.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

11 years agousb gadget: new "CDC Composite" gadget driver
David Brownell [Fri, 20 Jun 2008 01:20:26 +0000]
usb gadget: new "CDC Composite" gadget driver

This is a simple example of a composite gadget, combining two
Communications Class Device (CDC) functions:  ECM and ACM.

This provides a clear example of how the composite gadget framework
is intended to work.  It's surprising that MS-Windows (or at least,
XP and previous) won't "just work" with something this simple...

One /proc/bus/usb/devices listing looks like:

  T:  Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 46 Spd=480 MxCh= 0
  D:  Ver= 2.00 Cls=02(comm.) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
  P:  Vendor=0525 ProdID=a4aa Rev= 3.01
  S:  Manufacturer=Linux 2.6.26-rc6-pnut with net2280
  S:  Product=CDC Composite Gadget
  C:* #Ifs= 4 Cfg#= 1 Atr=c0 MxPwr=  2mA
  I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
  E:  Ad=83(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
  I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
  I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
  E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=cdc_acm
  E:  Ad=86(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
  I:* If#= 3 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_acm
  E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
  E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Not all USB peripheral controller hardware can support this driver.
All the highspeed-capable peripheral controllers with drivers now in
the mainline kernel seem to support this, as does omap_udc.  But
many full speed controllers don't have enough endpoints, or (as with
the PXA controllers) don't support altsettings.

Lightly tested.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>