13 years agom68k: reverse Mac IRQ damage
Finn Thain [Tue, 1 May 2007 20:32:55 +0000]
m68k: reverse Mac IRQ damage

Reverse the last of a monumental brown-paper-bag commit that went into the 2.3
kernel.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Mac DP8390 update
Finn Thain [Tue, 1 May 2007 20:32:54 +0000]
m68k: Mac DP8390 update

Fix the support for C/NET nubus ethernet cards etc. Sync up the DP8390 driver
with the latest code in the mac68k repo.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoNuBus header update
Finn Thain [Tue, 1 May 2007 20:32:53 +0000]
NuBus header update

Sync the nubus defines with the latest code in the mac68k repo. Some of these
are needed for DP8390 driver update in the next patch.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Mac interrupt priorities
Finn Thain [Tue, 1 May 2007 20:32:52 +0000]
m68k: Mac interrupt priorities

Add some more machines that support A/UX interrupt priorities. There are
probably others as well, but I've only tested these ones so far.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: remove unused adb.h
Finn Thain [Tue, 1 May 2007 20:32:51 +0000]
m68k: remove unused adb.h

The asm-m68k/adb.h header is unused. Some definitions are wrong and the rest
are duplicated in linux/adb.h. Remove it.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Amiga A2065 and Ariadne TX statistics
Geert Uytterhoeven [Tue, 1 May 2007 20:32:50 +0000]
m68k: Amiga A2065 and Ariadne TX statistics

Add missing code to the Amiga A2065 and Ariadne drivers to update
net_device_stats.tx_bytes.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: pmu_queue_request() declaration conflict
Finn Thain [Tue, 1 May 2007 20:32:49 +0000]
m68k: pmu_queue_request() declaration conflict

Fixes a "static qualifier follows non-static qualifier" error from gcc 4.

Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Atari SCSI workqueue updates
Geert Uytterhoeven [Tue, 1 May 2007 20:32:48 +0000]
m68k: Atari SCSI workqueue updates

Workqueue updates for the Atari SCSI driver

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Correct number of interrupts for Sun3
Sam Creasey [Tue, 1 May 2007 20:32:47 +0000]
m68k: Correct number of interrupts for Sun3

Only attempt to initialize the amount of interrupts a sun3 actually has...

Signed-off-by: Sam Creasey <sammy@sammy.net>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: early parameter support
Roman Zippel [Tue, 1 May 2007 20:32:45 +0000]
m68k: early parameter support

Add early parameter support and convert current users to it.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agohilkbd: Kill compiler warning and fix comment dyslexia
Geert Uytterhoeven [Tue, 1 May 2007 20:32:44 +0000]
hilkbd: Kill compiler warning and fix comment dyslexia

hilkbd: Kill compiler warning and fix comment dyslexia

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: reformat various m68k files
Roman Zippel [Tue, 1 May 2007 20:32:43 +0000]
m68k: reformat various m68k files

Reformat various m68k files, so they actually look like Linux sources.

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agolockdep: Add missing disable/enable irq variant
Roman Zippel [Tue, 1 May 2007 20:32:42 +0000]
lockdep: Add missing disable/enable irq variant

Add missing disable/enable irq variant

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Mac89x0 Ethernet netif updates
Matthias Urlichs [Tue, 1 May 2007 20:32:41 +0000]
m68k: Mac89x0 Ethernet netif updates

Macintosh CS89x0 Ethernet: Netif updates
Addition of netif_stop_queue() before transmission by Michael Schmitz
skb_copy_{from,to}_linear_data() conversion by Geert Uytterhoeven

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: CROSS_COMPILE = m68k-linux-gnu-
Geert Uytterhoeven [Tue, 1 May 2007 20:32:40 +0000]
m68k: CROSS_COMPILE = m68k-linux-gnu-

Recent cross-compilers are called m68k-linux-gnu-gcc instead of m68k-linux-gcc

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Atari fb revival
Michael Schmitz [Tue, 1 May 2007 20:32:39 +0000]
m68k: Atari fb revival

Update the atari fb to 2.6 by Michael Schmitz,
Reformatting and rewrite of bit plane functions by Roman Zippel,
A few more fixes by Geert Uytterhoeven.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Atari keyboard and mouse support.
Michael Schmitz [Tue, 1 May 2007 20:32:38 +0000]
m68k: Atari keyboard and mouse support.

Atari keyboard and mouse support.
(reformating and Kconfig fixes by Roman Zippel)

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Atari SCSI driver compile fixes
Roman Zippel [Tue, 1 May 2007 20:32:37 +0000]
m68k: Atari SCSI driver compile fixes

Atari SCSI driver compile fixes

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Reformat the Atari SCSI driver
Roman Zippel [Tue, 1 May 2007 20:32:36 +0000]
m68k: Reformat the Atari SCSI driver

Reformat the Atari SCSI driver

Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agom68k: Atari SCSI revival
Michael Schmitz [Tue, 1 May 2007 20:32:35 +0000]
m68k: Atari SCSI revival

SCSI should be working on a TT (but someone should really try!) but causes
trouble on a Falcon (as in: it ate a filesystem of mine) at least when
used concurrently with IDE. I have the notion it's because locking of the
ST-DMA interrupt by IDE is broken in 2.6 (the IDE driver always complains
about trying to release an already-released ST-DMA). Needs more work, but
that's on the IDE or m68k interrupt side rather than SCSI.

Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6
Linus Torvalds [Sat, 5 May 2007 00:46:27 +0000]
Merge branch 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6

* 'i2c-for-linus' of git://jdelvare.pck.nerim.net/jdelvare-2.6: (44 commits)
  i2c-s3c2410: Fix bug in releasing driver
  i2c-s3c2410: Fix I2C SDA to SCL setup time
  i2c: New i2c-tiny-usb bus driver
  i2c: Documentation update
  i2c: SPIN_LOCK_UNLOCKED cleanup
  i2c: Obsolete i2c-ixp2000, i2c-ixp4xx and scx200_i2c
  i2c: New Simtec I2C bus driver
  i2c: Bitbanging I2C bus driver using the GPIO API
  Use menuconfig objects - I2C
  i2c: Restore i2c_smbus_read_block_data
  i2c-pxa: Clean transaction stop
  i2c-algo-bit: Improve debugging
  i2c-algo-bit: Implement a 50/50 SCL duty cycle
  i2c-omap: Switch to static adapter numbering
  i2c: Blackfin Two Wire Interface driver
  i2c-algo-sgi: Comment and whitespace cleanups
  i2c: Make i2c_del_driver a void function
  i2c: Move i2c-isa-only exported symbol declarations
  i2c: Document i2c_new_device()
  i2c: Add i2c_new_probed_device()
  ...

Fixed trivial conflict in Documentation/feature-removal-schedule.txt manually.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMAINTAINER change for Connect Tech Inc
Stuart MacDonald [Fri, 4 May 2007 20:00:03 +0000]
MAINTAINER change for Connect Tech Inc

I am no longer with CTI. The Support Department will handle all
inquiries regarding the WH.

Signed-off-by: Stuart MacDonald <stuartm@connecttech.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq
Linus Torvalds [Sat, 5 May 2007 00:38:48 +0000]
Merge /pub/scm/linux/kernel/git/davej/cpufreq

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] Report the number of processors in PowerNow-k8 correctly
  [CPUFREQ] do not declare undefined functions
  [CPUFREQ] cleanup kconfig options
  [CPUFREQ] Longhaul - Revert Longhaul ver. 2
  [CPUFREQ] Remove deprecated /proc/acpi/processor/performance write support
  [CPUFREQ] Fix limited cpufreq when booted on battery
  Fix preemption warnings in speedstep-centrino.c
  [CPUFREQ] Longhaul - Correct PCI code
  [CPUFREQ] p4-clockmod: switch to rdmsr_on_cpu/wrmsr_on_cpu

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart
Linus Torvalds [Sat, 5 May 2007 00:38:16 +0000]
Merge /pub/scm/linux/kernel/git/davej/agpgart

* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart:
  [AGPGART] sworks-agp: Switch to PCI ref counting APIs
  [AGPGART] Nvidia AGP: Use refcount aware PCI interfaces
  [AGPGART] Fix sparse warning in sgi-agp.c
  [AGPGART] Intel-agp adjustments
  [AGPGART] Move [un]map_page_into_agp into asm/agp.h
  [AGPGART] Add missing calls to global_flush_tlb() to ali-agp
  [AGPGART] prevent probe collision of sis-agp and amd64_agp

13 years ago[S390] add hardware capability support (ELF_HWCAP).
Martin Schwidefsky [Fri, 4 May 2007 16:48:28 +0000]
[S390] add hardware capability support (ELF_HWCAP).

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years ago[S390] tape: New read configuration data.
Michael Holzheu [Fri, 4 May 2007 16:47:53 +0000]
[S390] tape: New read configuration data.

Instead of the deprecated read_conf_data(), implement a new function
tape_3590_read_dev_chars().

Signed-off-by: Michael Holzheu <holzheu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years ago[S390] qeth: New read configuration data.
Cornelia Huck [Fri, 4 May 2007 16:47:52 +0000]
[S390] qeth: New read configuration data.

Instead of the deprecated read_conf_data(), implement a new function
qeth_read_conf_data().

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years ago[S390] dasd: New read device characteristics and read configuration data.
Cornelia Huck [Fri, 4 May 2007 16:47:51 +0000]
[S390] dasd: New read device characteristics and read configuration data.

Instead of the deprecated read_dev_chars() and read_conf_data_lpm(),
implement dasd_generic_read_dev_chars() and dasd_eckd_read_conf_lpm().
These should even recover better from error than the original cio
functions.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years ago[S390] cio: Deprecate read_dev_chars() and read_conf_data{,_lpm}().
Cornelia Huck [Fri, 4 May 2007 16:47:50 +0000]
[S390] cio: Deprecate read_dev_chars() and read_conf_data{,_lpm}().

These helper functions are a leftover from 2.4 sync I/O and are a
notorious source for bugs. They lead to device driver specific code
creeping into cio, and some issues can't really be fixed at all.

Device drivers can easily implement those functions themselves in a
more robust manner, so let's get rid of them.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years ago[S390] qdio: make qdio statistics SMP-capable
Ursula Braun [Fri, 4 May 2007 16:47:49 +0000]
[S390] qdio: make qdio statistics SMP-capable

Use atomic_t/atomic64_t to make qdio performance statistics smp safe.
Remove temporarily calculation of "total time of inbound actions".

Signed-off-by: Ursula Braun <braunu@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years ago[S390] Export uaccess as non-gpl symbol.
Martin Schwidefsky [Fri, 4 May 2007 16:47:48 +0000]
[S390] Export uaccess as non-gpl symbol.

Commit c1821c2e9711adc3cd298a16b7237c92a2cee78d introduced the
uaccess structure that is used to select the correct set of user
copy functions for the different execution modes (standard vs.
noexec vs. z9 optimized user copy). The uaccess symbol is exported
with EXPORT_SYMBOL_GPL. This breaks all non-gpl modules that use
user copy. To make them work again change the export to
EXPORT_SYMBOL.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years ago[S390] aes-s390 key length.
Jan Glauber [Fri, 4 May 2007 16:47:47 +0000]
[S390] aes-s390 key length.

Register aes-s390 algorithms with the actual supported max keylen size

Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years ago[S390] get rid of kprobes notifier call chain.
Christoph Hellwig [Fri, 4 May 2007 16:47:46 +0000]
[S390] get rid of kprobes notifier call chain.

And here's a port of the powerpc patch to get rid of the notifier
chain completely to s390.  It's ontop of Martins patch as that one
is in mainline already.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

13 years agoi2c-s3c2410: Fix bug in releasing driver
Ben Dooks [Tue, 1 May 2007 21:26:35 +0000]
i2c-s3c2410: Fix bug in releasing driver

When compiled as a module, the i2c-s3c2410 driver does not
free either the IRQ or the i2c adapter it attached to the system.

As part of this fix, move to the usual kernel style
of freeing items as part of the probe error path
making the remove process easier.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-s3c2410: Fix I2C SDA to SCL setup time
Ben Dooks [Tue, 1 May 2007 21:26:35 +0000]
i2c-s3c2410: Fix I2C SDA to SCL setup time

Fix the setup time for SDA to SCL due to the way
the S3C24XX I2C controller works.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: New i2c-tiny-usb bus driver
Till Harbaum [Tue, 1 May 2007 21:26:35 +0000]
i2c: New i2c-tiny-usb bus driver

Add a driver for the i2c-tiny-usb interface. This is a simple
do-it-yourself USB to I2C interface targeted at experimental and
home use. See the i2c-tiny-usb homepage for hardware details:
http://www.harbaum.org/till/i2c_tiny_usb

Signed-off-by: Till Harbaum <till@harbaum.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Documentation update
Jean Delvare [Tue, 1 May 2007 21:26:35 +0000]
i2c: Documentation update

Make the documentation on how to write and port i2c drivers more in
line with the current state of things:
* i2c-isa is deprecated and soon gone, so stop advertising it.
* Drop many sensors-specific references. Most of them were outdated
  anyway.
* Update the example code to reflect the recent and not-so-recent
  API and coding style preference changes.
* Simplify the example init and cleanup functions.

This should make things less complex to understand for newcomers.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: SPIN_LOCK_UNLOCKED cleanup
Milind Arun Choudhary [Tue, 1 May 2007 21:26:34 +0000]
i2c: SPIN_LOCK_UNLOCKED cleanup

SPIN_LOCK_UNLOCKED cleanup, use __SPIN_LOCK_UNLOCKED instead.

Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Obsolete i2c-ixp2000, i2c-ixp4xx and scx200_i2c
Jean Delvare [Tue, 1 May 2007 21:26:34 +0000]
i2c: Obsolete i2c-ixp2000, i2c-ixp4xx and scx200_i2c

The new generic i2c-gpio driver should be used instead.
The obsolete drivers will be removed in September 2007.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Deepak Saxena <dsaxena@plexity.net>
Cc: Jordan Crouse <jordan.crouse@amd.com>

13 years agoi2c: New Simtec I2C bus driver
Ben Dooks [Tue, 1 May 2007 21:26:34 +0000]
i2c: New Simtec I2C bus driver

Platform driver for the Simtec CPLD based simple I2C logic.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Bitbanging I2C bus driver using the GPIO API
Haavard Skinnemoen [Tue, 1 May 2007 21:26:34 +0000]
i2c: Bitbanging I2C bus driver using the GPIO API

This is a very simple bitbanging I2C bus driver utilizing the new
arch-neutral GPIO API. Useful for chips that don't have a built-in
I2C controller, additional I2C busses, or testing purposes.

To use, include something similar to the following in the
board-specific setup code:

  #include <linux/i2c-gpio.h>

  static struct i2c_gpio_platform_data i2c_gpio_data = {
.sda_pin = GPIO_PIN_FOO,
.scl_pin = GPIO_PIN_BAR,
  };
  static struct platform_device i2c_gpio_device = {
.name = "i2c-gpio",
.id = 0,
.dev = {
.platform_data = &i2c_gpio_data,
},
  };

Register this platform_device, set up the I2C pins as GPIO if
required and you're ready to go. This will use default values for
udelay and timeout, and will work with GPIO hardware that does not
support open drain mode, but allows sensing of the SDA and SCL lines
even when they are being driven.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoUse menuconfig objects - I2C
Jan Engelhardt [Tue, 1 May 2007 21:26:34 +0000]
Use menuconfig objects - I2C

Allow the whole I2C menu to be disabled at once without diving into
the submenus for deselecting all options (should the user desire so).

Signed-off-by: Jan Engelhardt <jengelh@gmx.de>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Restore i2c_smbus_read_block_data
Jean Delvare [Tue, 1 May 2007 21:26:34 +0000]
i2c: Restore i2c_smbus_read_block_data

Add back the i2c_smbus_read_block_data helper function, it is needed
by the upcoming lm93 hardware monitoring driver and possibly others.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-pxa: Clean transaction stop
Jean Delvare [Tue, 1 May 2007 21:26:33 +0000]
i2c-pxa: Clean transaction stop

It was reported to me that the i2c-pxa driver was not able to process
more that 50 transactions per second. Investigation revealed that the
I2C unit was busy for 20 ms after every transaction. The reason seems
to be that we forget to clear the STOP and ACKNACK bits at the end of
the transaction. According to the PXA27x developer's manual, we shall
do so.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Lennert Buytenhek <kernel@wantstofly.org>
Cc: Nicolas Pitre <nico@cam.org>

13 years agoi2c-algo-bit: Improve debugging
Jean Delvare [Tue, 1 May 2007 21:26:33 +0000]
i2c-algo-bit: Improve debugging

Improve the debugging features of the i2c-algo-bit driver:
* Make it possible to compile the driver without debugging support
  at all, making it much smaller.
* Use dev_dbg() for debugging messages where possible, and dev_err()
  for error messages.
* Remove redundant debugging messages.

These changes allowed for minor code cleanups, which are included
as well.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-algo-bit: Implement a 50/50 SCL duty cycle
Jean Delvare [Tue, 1 May 2007 21:26:33 +0000]
i2c-algo-bit: Implement a 50/50 SCL duty cycle

The original i2c-algo-bit implementation uses a 33/66 SCL duty cycle
when bits are being written on the bus. While the I2C specification
doesn't forbid it, this prevents us from driving the I2C bus to its
max speed, limiting us to 66 kbps max on standard I2C busses.

Implementing a 50/50 duty cycle instead lets us max out the bandwidth
up to the theoretical max of 100 kbps on standard I2C busses. This is
particularly important when large amounts of data need to be transfered
over the bus, as is the case with some TV adapters when the firmware is
being uploaded.

In fact this change even allows, at least in theory, fast-mode I2C
support at 125, 166 and 250 kbps. There's no way to reach the
theoretical max of 400 kbps with this implementation. But I don't
think we want to put efforts in that direction anyway: software-driven
I2C is very CPU-intensive and bad for latency.

Other timing changes:
* Don't set SDA high explicitly on error, we're going to issue a stop
  condition before we leave anyway.
* If an error occurs when sending the slave address, yield the CPU
  before retrying, and remove the additional delay after the new start
  condition.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-omap: Switch to static adapter numbering
David Brownell [Tue, 1 May 2007 21:26:32 +0000]
i2c-omap: Switch to static adapter numbering

Update the OMAP I2C driver to use i2c_add_numbered_adapter(), so that
later patches can convert boards to using new-style drivers.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Blackfin Two Wire Interface driver
Bryan Wu [Tue, 1 May 2007 21:26:32 +0000]
i2c: Blackfin Two Wire Interface driver

The i2c linux driver for blackfin architecture which supports blackfin
on-chip TWI controller i2c operation.

Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-algo-sgi: Comment and whitespace cleanups
Ladislav Michl [Tue, 1 May 2007 21:26:32 +0000]
i2c-algo-sgi: Comment and whitespace cleanups

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Make i2c_del_driver a void function
Jean Delvare [Tue, 1 May 2007 21:26:32 +0000]
i2c: Make i2c_del_driver a void function

Make i2c_del_driver a void function, like all other driver removal
functions. It always returned 0 even when errors occured, and nobody
ever actually checked the return value anyway. And we cannot fail
a module removal anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Move i2c-isa-only exported symbol declarations
Jean Delvare [Tue, 1 May 2007 21:26:32 +0000]
i2c: Move i2c-isa-only exported symbol declarations

Move the declaration of i2c-isa-only exported symbols to i2c-isa
itself, that's the best way to ensure nobody will attempt to use them.
Hopefully we'll get rid of the exports themselves soon anyway.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Document i2c_new_device()
Jean Delvare [Tue, 1 May 2007 21:26:32 +0000]
i2c: Document i2c_new_device()

Document the new i2c_new_device(), i2c_new_probed_device() and
i2c_unregister_device() functions.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Add i2c_new_probed_device()
Jean Delvare [Tue, 1 May 2007 21:26:31 +0000]
i2c: Add i2c_new_probed_device()

Add a new helper function to instantiate an i2c device. It is meant as a
replacement for i2c_new_device() when you don't know for sure at which
address your I2C/SMBus device lives. This happens frequently on TV
adapters for example, you know there is a tuner chip on the bus, but
depending on the exact board model and revision, it can live at different
addresses. So, the new i2c_new_probed_device() function will probe the bus
according to a list of addresses, and as soon as one of these addresses
responds, it will call i2c_new_device() on that one address.

This function will make it possible to port the old i2c drivers to the
new model quickly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-algo-bit: Add i2c_bit_add_numbered_bus
Jean Delvare [Tue, 1 May 2007 21:26:31 +0000]
i2c-algo-bit: Add i2c_bit_add_numbered_bus

Add i2c_bit_add_numbered_bus(), which is equivalent to i2c_bit_add_bus
except that it calls i2c_add_numbered_adapter() at the end instead of
i2c_add_adapter().

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: i2c EXPORT_SYMBOL cleanup
David Brownell [Tue, 1 May 2007 21:26:31 +0000]
i2c: i2c EXPORT_SYMBOL cleanup

Make i2c-core.c obey Documentation/CodingStyle better by snugging
the EXPORT_SYMBOL declarations next to the relevant definitions.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Add i2c_add_numbered_adapter()
David Brownell [Tue, 1 May 2007 21:26:31 +0000]
i2c: Add i2c_add_numbered_adapter()

This adds a call, i2c_add_numbered_adapter(), registering an I2C adapter
with a specific bus number and then creating I2C device nodes for any
pre-declared devices on that bus.  It builds on previous patches adding
I2C probe() and remove() support, and that pre-declaration of devices.

This completes the core support for "new style" I2C device drivers.
Those follow the standard driver model for binding devices to drivers
(using probe and remove methods) rather than a legacy model (where the
driver tries to autoconfigure each bus, and registers devices itself).

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Add i2c_board_info and i2c_new_device()
David Brownell [Tue, 1 May 2007 21:26:31 +0000]
i2c: Add i2c_board_info and i2c_new_device()

This provides partial support for new-style I2C driver binding.  It builds
on "struct i2c_board_info" declarations that identify I2C devices on a given
board.  This is needed on systems with I2C devices that can't be fully probed
and/or autoconfigured, such as many embedded Linux configurations where the
way a given I2C device is wired may affect how it must be used.

There are two models for declaring such devices:

 * LATE -- using a public function i2c_new_device().  This lets modules
   declare I2C devices found *AFTER* a given I2C adapter becomes available.

   For example, a PCI card could create adapters giving access to utility
   chips on that card, and this would be used to associate those chips with
   those adapters.

 * EARLY -- from arch_initcall() level code, using a non-exported function
   i2c_register_board_info().  This copies the declarations *BEFORE* such
   an i2c_adapter becomes available, arranging that i2c_new_device() will
   be called later when i2c-core registers the relevant i2c_adapter.

   For example, arch/.../.../board-*.c files would declare the I2C devices
   along with their platform data, and I2C devices would behave much like
   PNPACPI devices.  (That is, both enumerate from board-specific tables.)

To match the exported i2c_new_device(), the previously-private function
i2c_unregister_device() is now exported.

Pending later patches using these new APIs, this is effectively a NOP.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: i2c probe() and remove() documented
David Brownell [Tue, 1 May 2007 21:26:31 +0000]
i2c: i2c probe() and remove() documented

Update Documentation/i2c to match previous patches updating probe()
and remove() logic.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: i2c stack can remove()
David Brownell [Tue, 1 May 2007 21:26:30 +0000]
i2c: i2c stack can remove()

More update for new style driver support:  add a remove() method, and
use it in the relevant code paths.

Again, nothing will use this yet since there's nothing to create devices
feeding this infrastructure.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: i2c stack can probe()
David Brownell [Tue, 1 May 2007 21:26:30 +0000]
i2c: i2c stack can probe()

One of a series of I2C infrastructure updates to support enumeration using
the standard Linux driver model.

This patch updates probe() and associated hotplug/coldplug support, but
not remove().  Nothing yet _uses_ it to create I2C devices, so those
hotplug/coldplug mechanisms will be the only externally visible change.
This patch will be an overall NOP since the I2C stack doesn't yet create
clients/devices except as part of binding them to legacy drivers.

Some code is moved earlier in the source code, helping group more of the
per-device infrastructure in one place and simplifying handling per-device
attributes.

Terminology being adopted:  "legacy drivers" create devices (i2c_client)
themselves, while "new style" ones follow the driver model (the i2c_client
is handed to the probe routine).  It's an either/or thing; the two models
don't mix, and drivers that try mixing them won't even be registered.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-pca-isa: Port to the new device driver model
Jean Delvare [Tue, 1 May 2007 21:26:30 +0000]
i2c-pca-isa: Port to the new device driver model

Port the i2c-pca-isa driver to the new device driver model. I'm
using Rene Herman's new isa bus type, as it fits the needs nicely. One
benefit is that we can now give a proper parent to our i2c adapter.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-elektor: Port to the new device driver model
Jean Delvare [Tue, 1 May 2007 21:26:30 +0000]
i2c-elektor: Port to the new device driver model

Port the i2c-elektor driver to the new device driver model. I'm
using Rene Herman's new isa bus type, as it fits the needs nicely. One
benefit is that we can now give a proper parent to our i2c adapter.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-parport-light: Port to the new device driver model
Jean Delvare [Tue, 1 May 2007 21:26:30 +0000]
i2c-parport-light: Port to the new device driver model

Also fix a small race on driver unload: we need to unregister the
i2c adapter before we power it off.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-parport: Fix a minor race on driver unload
Jean Delvare [Tue, 1 May 2007 21:26:30 +0000]
i2c-parport: Fix a minor race on driver unload

When unloading the driver, we really want to unregister the i2c adapter
before we power it off, rather than the other way around.

Also speed up the bus a bit when we can sense SCL. The slaves will
stretch the line as needed.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoscx200_acb: Fix PCI device reference count
Jean Delvare [Tue, 1 May 2007 21:26:30 +0000]
scx200_acb: Fix PCI device reference count

The scx200_acb driver supports two kind of devices, PCI ones and ISA
ones. Even ISA ones are detected using the presence of a given PCI
device, and we get a reference to it, but never put it back, so we
have a leak. Fix it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Cleanup the includes of <linux/i2c.h>
Jean Delvare [Tue, 1 May 2007 21:26:29 +0000]
i2c: Cleanup the includes of <linux/i2c.h>

Clean up the includes of <linux/i2c.h>. Only include this header file
when we actually need it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-nforce2: Add support for the MCP61 and MCP65
Jean Delvare [Tue, 1 May 2007 21:26:29 +0000]
i2c-nforce2: Add support for the MCP61 and MCP65

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Hans-Frieder Vogt <hfvogt@gmx.net>

13 years agoi2c-parport: Optimize binary size
Jean Delvare [Tue, 1 May 2007 21:26:29 +0000]
i2c-parport: Optimize binary size

Initialize the fields of the i2c_adapter structure individually,
rather than copying a whole static template structure. This shaves
off 474 bytes or 14% (on i386) from the binary size.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-algo-bit: Emulate SMBus block read
Jean Delvare [Tue, 1 May 2007 21:26:29 +0000]
i2c-algo-bit: Emulate SMBus block read

Now that i2c-core lets the i2c bus drivers emulate the SMBus block read
and SMBus block process call transaction types, let's implement that in
the popular i2c bit-banging driver. This will also act as a reference
implementation for other bus drivers which want to do the same.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Emulate SMBus block read over I2C
Jean Delvare [Tue, 1 May 2007 21:26:29 +0000]
i2c: Emulate SMBus block read over I2C

Let the I2C bus drivers emulate the SMBus Block Read and Block Process
Call transactions if they wish. This requires to define a new message
flag, which i2c-core will use to let the underlying I2C bus driver
know that the first received byte will specify the length of the read
message.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c-algo-bit: Always send a stop condition before leaving
Jean Delvare [Tue, 1 May 2007 21:26:28 +0000]
i2c-algo-bit: Always send a stop condition before leaving

The i2c-algo-bit driver doesn't behave well on read errors: it'll
bail out without even sending a stop condition on the bus, so the bus
will be stuck. So make sure that we always send a stop condition on
the bus before we leave. The best way to make sure is to always send
it at the end of function bit_xfer.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Rename dev_to_i2c_adapter()
David Brownell [Tue, 1 May 2007 21:26:28 +0000]
i2c: Rename dev_to_i2c_adapter()

Rename dev_to_i2c_adapter() as to_i2c_adapter(), since the previous
syntax was a surprising and needless difference from normal naming
conventions in Linux.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Class attribute cleanup
David Brownell [Tue, 1 May 2007 21:26:28 +0000]
i2c: Class attribute cleanup

This patch is a minor cleanup/code shrink, using class infrastructure
in i2c-core to manage the i2c_adapter attribute.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Shrink struct i2c_client
David Brownell [Tue, 1 May 2007 21:26:28 +0000]
i2c: Shrink struct i2c_client

This shrinks the size of "struct i2c_client" by 40 bytes:

 - Substantially shrinks the string used to identify the chip type
 - The "flags" don't need to be so big
 - Removes some internal padding

It also adds kerneldoc for that struct, explaining how "name" is really a
chip type identifier; it's otherwise potentially confusing.

Because the I2C_NAME_SIZE symbol was abused for both i2c_client.name
and for i2c_adapter.name, this needed to affect i2c_adapter too.  The
adapters which used that symbol now use the more-obviously-correct
idiom of taking the size of that field.

JD: Shorten i2c_adapter.name from 50 to 48 bytes while we're here, to
avoid wasting space in padding.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: i2c_register_driver() cleanup
David Brownell [Tue, 1 May 2007 21:26:28 +0000]
i2c: i2c_register_driver() cleanup

Minor cleanup in i2c_register_driver():  use list_for_each_entry().

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: i2c_adapter devices need no driver
Jean Delvare [Tue, 1 May 2007 21:26:28 +0000]
i2c: i2c_adapter devices need no driver

Kill i2c_adapter_driver as it doesn't make sense and it prevents
further i2c-core cleanups. i2c_adapter devices are virtual devices
(ex-class devices) and as such they don't need a driver.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agoi2c: Kill i2c_adapter.class_dev
Jean Delvare [Tue, 1 May 2007 21:26:27 +0000]
i2c: Kill i2c_adapter.class_dev

Kill i2c_adapter.class_dev. Instead, set the class of i2c_adapter.dev
to i2c_adapter_class, so that a symlink will be created for every
i2c_adapter in /sys/class/i2c-adapter.

The same change must be mirrored to i2c-isa as it duplicates some
of the i2c-core functionalities.

User-space tools and libraries might need some adjustments. In
particular, libsensors from lm_sensors 2.10.3 or later is required for
proper discovery of i2c adapter names after this change.

Signed-off-by: Jean Delvare <khali@linux-fr.org>

13 years agolibata: honour host controllers that want just one host
Linus Torvalds [Tue, 1 May 2007 00:43:48 +0000]
libata: honour host controllers that want just one host

The Marvell IDE interface on my machine would hit a BUG_ON() in
lib/iomem.c because it was calling ata_pci_init_one() specifying just a
single port on the host, but that would actually end up trying to
initialize two ports, the second one with bogus information.

This fixes "ata_pci_init_one()" so that it actually passes down the
n_ports variable that it got from the low-level driver to the host
allocation routine ("ata_host_alloc_pinfo()"), which results in the ATA
layer actually having the correct port number information.

And in order to make it all work, I also needed to fix a few places that
had incorrectly hard-coded the fact that a host always had exactly two
ports (both ata_pci_init_bmdma() and ata_request_legacy_irqs() would
just always iterate over both ports).

Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agopm: include EIO from errno-base.h
David Rientjes [Mon, 30 Apr 2007 22:09:56 +0000]
pm: include EIO from errno-base.h

For backwards compatibility, call_platform_enable_wakeup() can return 0
instead of -EIO since we aren't guaranteed to have errno defined.

Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoAdd kvasprintf()
Jeremy Fitzhardinge [Mon, 30 Apr 2007 22:09:56 +0000]
Add kvasprintf()

Add a kvasprintf() function to complement kasprintf().

No in-tree users yet, but I have some coming up.

[akpm@linux-foundation.org: EXPORT it]
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Keir Fraser <keir@xensource.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agopower management: force pm_ops.valid callback to be assigned
Johannes Berg [Mon, 30 Apr 2007 22:09:55 +0000]
power management: force pm_ops.valid callback to be assigned

This patch changes the docs and behaviour from "all states valid" to "no
states valid" if no .valid callback is assigned.  Users of pm_ops that only
need mem sleep can assign pm_valid_only_mem without any overhead, others
will require more elaborate callbacks.

Now that all users of pm_ops have a .valid callback this is a safe thing to
do and prevents things from getting messy again as they were before.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Looks-okay-to: Rafael J. Wysocki <rjw@sisk.pl>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agopower management: implement pm_ops.valid for everybody
Johannes Berg [Mon, 30 Apr 2007 22:09:54 +0000]
power management: implement pm_ops.valid for everybody

Almost all users of pm_ops only support mem sleep, don't check in .valid and
don't reject any others in .prepare so users can be confused if they check
/sys/power/state, especially when new states are added (these would then
result in s-t-r although they're supposed to be something different).

This patch implements a generic pm_valid_only_mem function that is then
exported for users and puts it to use in almost all existing pm_ops.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: linux-pm@lists.linux-foundation.org
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agopower management: remove firmware disk mode
Johannes Berg [Mon, 30 Apr 2007 22:09:53 +0000]
power management: remove firmware disk mode

This patch removes the firmware disk suspend mode which is the wrong approach,
it is supposed to be used for implementing firmware-based disk suspend but
cannot actually be used for that.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agorework pm_ops pm_disk_mode, kill misuse
Johannes Berg [Mon, 30 Apr 2007 22:09:51 +0000]
rework pm_ops pm_disk_mode, kill misuse

This patch series cleans up some misconceptions about pm_ops.  Some users of
the pm_ops structure attempt to use it to stop the user from entering suspend
to disk, this, however, is not possible since the user can always use
"shutdown" in /sys/power/disk and then the pm_ops are never invoked.  Also,
platforms that don't support suspend to disk simply should not allow
configuring SOFTWARE_SUSPEND (read the help text on it, it only selects
suspend to disk and nothing else, all the other stuff depends on PM).

The pm_ops structure is actually intended to provide a way to enter
platform-defined sleep states (currently supported states are "standby" and
"mem" (suspend to ram)) and additionally (if SOFTWARE_SUSPEND is configured)
allows a platform to support a platform specific way to enter low-power mode
once everything has been saved to disk.  This is currently only used by ACPI
(S4).

This patch:

The pm_ops.pm_disk_mode is used in totally bogus ways since nobody really
seems to understand what it actually does.

This patch clarifies the pm_disk_mode description.

It also removes all the arm and sh users that think they can veto suspend to
disk via pm_ops; not so since the user can always do echo shutdown >
/sys/power/disk, they need to find a better way involving Kconfig or such.

ACPI is the only user left with a non-zero pm_disk_mode.

The patch also sets the default mode to shutdown again, but when a new pm_ops
is registered its pm_disk_mode is selected as default, that way the default
stays for ACPI where it is apparently required.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David Brownell <david-b@pacbell.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: <linux-pm@lists.linux-foundation.org>
Cc: Len Brown <lenb@kernel.org>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoreiserfs: suppress lockdep warning
Jeff Mahoney [Mon, 30 Apr 2007 22:09:50 +0000]
reiserfs: suppress lockdep warning

We're getting lockdep warnings due to a post-2.6.21-rc7 bugfix.

The xattr_sem can never be taken in the manner described. Internal inodes
are protected by I_PRIVATE.  Add the appropriate annotation.

Cc: <stable@kernel.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years agoExtend print_symbol capability
Robert Peterson [Mon, 30 Apr 2007 22:09:48 +0000]
Extend print_symbol capability

Today's print_symbol function dumps a kernel symbol with printk.  This
patch extends the functionality of kallsyms.c so that the symbol lookup
function may be used without the printk.  This is useful for modules that
want to dump symbols elsewhere, for example, to debugfs.  I intend to use
the new function call in the GFS2 file system (which will be a separate
patch).

[akpm@linux-foundation.org: build fix]
[clameter@sgi.com: sprint_symbol should return length of string like sprintf]
Signed-off-by: Robert Peterson <rpeterso@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Roman Zippel <zippel@linux-m68k.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Paulo Marques <pmarques@grupopie.com>
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

13 years ago[UDP]: Do not allow specific bind when wildcard bind exists.
David S. Miller [Mon, 30 Apr 2007 21:51:58 +0000]
[UDP]: Do not allow specific bind when wildcard bind exists.

When allocating local ports, do not allow a bind to a port
with a specific local address when a bind to that port with
a wildcard local address already exists.

Noticed by Linus.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[IPV4] UDP: Fix endianness bugs in hashing changes.
David S. Miller [Mon, 30 Apr 2007 20:35:29 +0000]
[IPV4] UDP: Fix endianness bugs in hashing changes.

I accidently applied an earlier version of Eric Dumazet's patch, from
March 21st.  His version from March 30th didn't have these bugs, so
this just interdiffs to the correct patch.

Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[CPUFREQ] Report the number of processors in PowerNow-k8 correctly
Mark Langsdorf [Mon, 30 Apr 2007 19:15:05 +0000]
[CPUFREQ] Report the number of processors in PowerNow-k8 correctly

The PowerNow! driver for Opteron reports the number of cores
in the system, but claims to report the number of processors.
Fix this minor cosmetic bug.

Signed-off-by: Bhavana Nagendra <bhavana.nagendra@amd.com>
Acked-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>

13 years ago[CPUFREQ] do not declare undefined functions
David Rientjes [Mon, 30 Apr 2007 14:34:37 +0000]
[CPUFREQ] do not declare undefined functions

fill_powernow_table_pstate() and fill_powernow_table_fidvid() are only
defined and used for X86_POWERNOW_K8_ACPI.

Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Dave Jones <davej@redhat.com>

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394...
Linus Torvalds [Mon, 30 Apr 2007 15:59:57 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: (56 commits)
  ieee1394: remove garbage from Kconfig
  ieee1394: more help in Kconfig
  ieee1394: ohci1394: Fix mistake in printk message.
  ieee1394: ohci1394: remove unnecessary rcvPhyPkt bit flipping in LinkControl register
  ieee1394: ohci1394: fix cosmetic problem in error logging
  ieee1394: eth1394: send async streams at S100 on 1394b buses
  ieee1394: eth1394: fix error path in module_init
  ieee1394: eth1394: correct return codes in hard_start_xmit
  ieee1394: eth1394: hard_start_xmit is called in atomic context
  ieee1394: eth1394: some conditions are unlikely
  ieee1394: eth1394: clean up fragment_overlap
  ieee1394: eth1394: don't use alloc_etherdev
  ieee1394: eth1394: omit useless set_mac_address callback
  ieee1394: eth1394: CONFIG_INET is always defined
  ieee1394: eth1394: allow MTU bigger than 1500
  ieee1394: unexport highlevel_host_reset
  ieee1394: eth1394: contain host reset
  ieee1394: eth1394: shorter error messages
  ieee1394: eth1394: correct a memset argument
  ieee1394: eth1394: refactor .probe and .update
  ...

13 years agoMerge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid
Linus Torvalds [Mon, 30 Apr 2007 15:58:21 +0000]
Merge branch 'for-linus' of /linux/kernel/git/jikos/hid

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jikos/hid: (21 commits)
  USB HID: don't warn on idVendor == 0
  USB HID: add 'quirks' module parameter
  USB HID: add support for dynamically-created quirks
  USB HID: clarify static quirk handling as squirks
  USB HID: encapsulate quirk handling into hid-quirks.c
  USB HID: EMS USBII device needs HID_QUIRK_MULTI_INPUT
  HID: update copyright and authorship macro
  HID: introduce proper zeroing of unused bits in output reports
  USB HID: add support for WiseGroup MP-8800 Quad Joypad
  USB HID: add FF support for Logitech Force 3D Pro Joystick
  USB HID: numlock quirk for dell W7658 keyboard
  USB HID: Logitech MX3000 keyboard needs report descriptor quirk
  USB HID: extend quirk for Logitech S510 keyboard
  USB HID: usbkbd/usbmouse - handle errors when registering devices
  USB HID: add QUIRK_HIDDEV for Belkin Flip KVM
  HID: enable dead keys on a belkin wireless keyboard
  USB HID: Thustmaster firestorm dual power v1 support
  USB HID: specify explicit size for hid_blacklist.quirks
  USB HID: fix retry & reset logic
  USB HID: consolidate vendor/product ids
  ...

13 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 30 Apr 2007 15:14:42 +0000]
Merge /pub/scm/linux/kernel/git/davem/net-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits)
  [IPV4] SNMP: Support OutMcastPkts and OutBcastPkts
  [IPV4] SNMP: Support InMcastPkts and InBcastPkts
  [IPV4] SNMP: Support InTruncatedPkts
  [IPV4] SNMP: Support InNoRoutes
  [SNMP]: Add definitions for {In,Out}BcastPkts
  [TCP] FRTO: RFC4138 allows Nagle override when new data must be sent
  [TCP] FRTO: Delay skb available check until it's mandatory
  [XFRM]: Restrict upper layer information by bundle.
  [TCP]: Catch skb with S+L bugs earlier
  [PATCH] INET : IPV4 UDP lookups converted to a 2 pass algo
  [L2TP]: Add the ability to autoload a pppox protocol module.
  [SKB]: Introduce skb_queue_walk_safe()
  [AF_IUCV/IUCV]: smp_call_function deadlock
  [IPV6]: Fix slab corruption running ip6sic
  [TCP]: Update references in two old comments
  [XFRM]: Export SPD info
  [IPV6]: Track device renames in snmp6.
  [SCTP]: Fix sctp_getsockopt_local_addrs_old() to use local storage.
  [NET]: Remove NETIF_F_INTERNAL_STATS, default to internal stats.
  [NETPOLL]: Remove CONFIG_NETPOLL_RX
  ...

13 years agoMerge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block
Linus Torvalds [Mon, 30 Apr 2007 15:12:39 +0000]
Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block:
  [PATCH] elevator: elv_list_lock does not need irq disabling
  [BLOCK] Don't pin lots of memory in mempools
  cfq-iosched: speedup cic rb lookup
  ll_rw_blk: add io_context private pointer
  cfq-iosched: get rid of cfqq hash
  cfq-iosched: tighten queue request overlap condition
  cfq-iosched: improve sync vs async workloads
  cfq-iosched: never allow an async queue idling
  cfq-iosched: get rid of ->dispatch_slice
  cfq-iosched: don't pass unused preemption variable around
  cfq-iosched: get rid of ->cur_rr and ->cfq_list
  cfq-iosched: slice offset should take ioprio into account
  [PATCH] cfq-iosched: style cleanups and comments
  cfq-iosched: sort IDLE queues into the rbtree
  cfq-iosched: sort RT queues into the rbtree
  [PATCH] cfq-iosched: speed up rbtree handling
  cfq-iosched: rework the whole round-robin list concept
  cfq-iosched: minor updates
  cfq-iosched: development update
  cfq-iosched: improve preemption for cooperating tasks

13 years agoMerge branch 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus...
Linus Torvalds [Mon, 30 Apr 2007 15:10:12 +0000]
Merge branch 'for-2.6.22' of git://git./linux/kernel/git/paulus/powerpc

* 'for-2.6.22' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (255 commits)
  [POWERPC] Remove dev_dbg redefinition in drivers/ps3/vuart.c
  [POWERPC] remove kernel module option for booke wdt
  [POWERPC] Avoid putting cpu node twice
  [POWERPC] Spinlock initializer cleanup
  [POWERPC] ppc4xx_sgdma needs dma-mapping.h
  [POWERPC] arch/powerpc/sysdev/timer.c build fix
  [POWERPC] get_property cleanups
  [POWERPC] Remove the unused HTDMSOUND driver
  [POWERPC] cell: cbe_cpufreq cleanup and crash fix
  [POWERPC] Declare enable_kernel_spe in a header
  [POWERPC] Add dt_xlate_addr() to bootwrapper
  [POWERPC] bootwrapper: CONFIG_ -> CONFIG_DEVICE_TREE
  [POWERPC] Don't define a custom bd_t for Xilixn Virtex based boards.
  [POWERPC] Add sane defaults for Xilinx EDK generated xparameters files
  [POWERPC] Add uartlite boot console driver for the zImage wrapper
  [POWERPC] Stop using ppc_sys for Xilinx Virtex boards
  [POWERPC] New registration for common Xilinx Virtex ppc405 platform devices
  [POWERPC] Merge common virtex header files
  [POWERPC] Rework Kconfig dependancies for Xilinx Virtex ppc405 platform
  [POWERPC] Clean up cpufreq Kconfig dependencies
  ...

13 years ago[IPV4] SNMP: Support OutMcastPkts and OutBcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:48:20 +0000]
[IPV4] SNMP: Support OutMcastPkts and OutBcastPkts

A transmitted IP multicast datagram should be counted as OutMcastPkts.
By the same token, a transmitted IP broadcast datagram should be
counted as OutBcastPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[IPV4] SNMP: Support InMcastPkts and InBcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:48:10 +0000]
[IPV4] SNMP: Support InMcastPkts and InBcastPkts

A received IP multicast datagram should be counted as InMcastPkts.
By the same token, a received IP broadcast datagram should be
counted as InBcastPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[IPV4] SNMP: Support InTruncatedPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:46:30 +0000]
[IPV4] SNMP: Support InTruncatedPkts

An IP datagram which is being discarded because the datagram frame
didn't carry enough data should be counted as InTruncatedPkts.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[IPV4] SNMP: Support InNoRoutes
Mitsuru Chinen [Mon, 30 Apr 2007 07:45:49 +0000]
[IPV4] SNMP: Support InNoRoutes

An IP datagram which is being discarded because of no routes in the
forwarding path should be counted as InNoRoutes.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

13 years ago[SNMP]: Add definitions for {In,Out}BcastPkts
Mitsuru Chinen [Mon, 30 Apr 2007 07:45:02 +0000]
[SNMP]: Add definitions for {In,Out}BcastPkts

The updated IP-MIB RFC (RFC4293) specifys new objects, InBcastPkts
and OutBcastPkts. This adds definitions for them.

Signed-off-by: Mitsuru Chinen <mitch@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>