11 years agopcmcia: use pcmcia_loop_config in ISDN pcmcia drivers
Dominik Brodowski [Tue, 29 Jul 2008 06:38:55 +0000]
pcmcia: use pcmcia_loop_config in ISDN pcmcia drivers

Use the config loop helper in ISDN pcmcia drivers.

CC: Karsten Keil <kkeil@suse.de>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

11 years agopcmcia: use pcmcia_loop_config in scsi pcmcia drivers
Dominik Brodowski [Tue, 29 Jul 2008 06:38:55 +0000]
pcmcia: use pcmcia_loop_config in scsi pcmcia drivers

Use the config loop helper in scsi pcmcia drivers.

CC: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
CC: linux-scsi@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

11 years agopcmcia: use pcmcia_loop_config in bluetooth drivers
Dominik Brodowski [Tue, 29 Jul 2008 06:38:55 +0000]
pcmcia: use pcmcia_loop_config in bluetooth drivers

Use the config loop helper in bluetooth pcmcia drivers.

CC: Marcel Holtmann <marcel@holtmann.org>
CC: linux-bluetooth@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

11 years agopcmcia: use pcmcia_loop_config in pata and ide drivers
Dominik Brodowski [Tue, 29 Jul 2008 06:43:20 +0000]
pcmcia: use pcmcia_loop_config in pata and ide drivers

Use the config loop helper in pata_pcmcia and ide_cs

CC: Tejun Heo <htejun@gmail.com>
CC: Alan Cox <alan@lxorguk.ukuu.org.uk>
CC: linux-ide@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

11 years agopcmcia: add pcmcia_loop_config() helper
Dominik Brodowski [Tue, 29 Jul 2008 06:38:30 +0000]
pcmcia: add pcmcia_loop_config() helper

By calling pcmcia_loop_config(), a pcmcia driver can iterate over all
available configuration options. During a driver's probe() phase, one
doesn't need to use pcmcia_get_{first,next}_tuple, pcmcia_get_tuple_data
and pcmcia_parse_tuple directly in most if not all cases.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

11 years agoLinux 2.6.27-rc1
Linus Torvalds [Tue, 29 Jul 2008 02:40:31 +0000]
Linux 2.6.27-rc1

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Tue, 29 Jul 2008 01:16:26 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: turn Waker into a thread, not a process
  lguest: Enlarge virtio rings
  lguest: Use GSO/IFF_VNET_HDR extensions on tun/tap
  lguest: Remove 'network: no dma buffer!' warning
  lguest: Adaptive timeout
  lguest: Tell Guest net not to notify us on every packet xmit
  lguest: net block unneeded receive queue update notifications
  lguest: wrap last_avail accesses.
  lguest: use cpu capability accessors
  lguest: virtio-rng support
  lguest: Support assigning a MAC address
  lguest: Don't leak /dev/zero fd
  lguest: fix verbose printing of device features.
  lguest: fix switcher_page leak on unload
  lguest: Guest int3 fix
  lguest: set max_pfn_mapped, growl loudly at Yinghai Lu

11 years agoMerge branch 'for-linus' of git://git.o-hand.com/linux-mfd
Linus Torvalds [Tue, 29 Jul 2008 01:15:41 +0000]
Merge branch 'for-linus' of git://git.o-hand.com/linux-mfd

* 'for-linus' of git://git.o-hand.com/linux-mfd:
  mfd: accept pure device as a parent, not only platform_device
  mfd: add platform_data to mfd_cell
  mfd: Coding style fixes
  mfd: Use to_platform_device instead of container_of

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes...
Linus Torvalds [Tue, 29 Jul 2008 01:14:24 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits)
  x86/PCI: use dev_printk when possible
  PCI: add D3 power state avoidance quirk
  PCI: fix bogus "'device' may be used uninitialized" warning in pci_slot
  PCI: add an option to allow ASPM enabled forcibly
  PCI: disable ASPM on pre-1.1 PCIe devices
  PCI: disable ASPM per ACPI FADT setting
  PCI MSI: Don't disable MSIs if the mask bit isn't supported
  PCI: handle 64-bit resources better on 32-bit machines
  PCI: rewrite PCI BAR reading code
  PCI: document pci_target_state
  PCI hotplug: fix typo in pcie hotplug output
  x86 gart: replace to_pages macro with iommu_num_pages
  x86, AMD IOMMU: replace to_pages macro with iommu_num_pages
  iommu: add iommu_num_pages helper function
  dma-coherent: add documentation to new interfaces
  Cris: convert to using generic dma-coherent mem allocator
  Sh: use generic per-device coherent dma allocator
  ARM: support generic per-device coherent dma mem
  Generic dma-coherent: fix DMA_MEMORY_EXCLUSIVE
  x86: use generic per-device dma coherent allocator
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6
Linus Torvalds [Tue, 29 Jul 2008 01:13:48 +0000]
Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] qla2xxx: fix msleep compile error

11 years agoFix 'get_user_pages_fast()' with non-page-aligned start address
Linus Torvalds [Tue, 29 Jul 2008 00:54:21 +0000]
Fix 'get_user_pages_fast()' with non-page-aligned start address

Alexey Dobriyan reported trouble with LTP with the new fast-gup code,
and Johannes Weiner debugged it to non-page-aligned addresses, where the
new get_user_pages_fast() code would do all the wrong things, including
just traversing past the end of the requested area due to 'addr' never
matching 'end' exactly.

This is not a pretty fix, and we may actually want to move the alignment
into generic code, leaving just the core code per-arch, but Alexey
verified that the vmsplice01 LTP test doesn't crash with this.

Reported-and-tested-by: Alexey Dobriyan <adobriyan@gmail.com>
Debugged-by: Johannes Weiner <hannes@saeurebad.de>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agolguest: turn Waker into a thread, not a process
Rusty Russell [Tue, 29 Jul 2008 14:58:38 +0000]
lguest: turn Waker into a thread, not a process

lguest uses a Waker process to break it out of the kernel (ie.
actually running the guest) when file descriptor needs attention.

Changing this from a process to a thread somewhat simplifies things:
it can directly access the fd_set of things to watch.  More
importantly, it means that the Waker can see Guest memory correctly,
so /dev/vring file descriptors will work as anticipated (the
alternative is to actually mmap MAP_SHARED, but you can't do that with
/dev/zero).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: Enlarge virtio rings
Rusty Russell [Tue, 29 Jul 2008 14:58:37 +0000]
lguest: Enlarge virtio rings

With big packets, 128 entries is a little small.

Guest -> Host 1GB TCP:
Before: 8.43625 seconds xmit 95640 recv 198266 timeout 49771 usec 1252
After: 8.01099 seconds xmit 49200 recv 102263 timeout 26014 usec 2118

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: Use GSO/IFF_VNET_HDR extensions on tun/tap
Rusty Russell [Tue, 29 Jul 2008 14:58:37 +0000]
lguest: Use GSO/IFF_VNET_HDR extensions on tun/tap

Guest -> Host 1GB TCP:
Before 20.1974 seconds xmit 214510 recv 5 timeout 214491 usec 278
After 8.43625 seconds xmit 95640 recv 198266 timeout 49771 usec 1252

Host -> Guest 1GB TCP:
Before: Seconds 9.98854 xmit 172166 recv 5344 timeout 172157 usec 251
After: Seconds 5.72803 xmit 244322 recv 9919 timeout 244302 usec 156

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: Remove 'network: no dma buffer!' warning
Rusty Russell [Tue, 29 Jul 2008 14:58:36 +0000]
lguest: Remove 'network: no dma buffer!' warning

This warning can happen a lot under load, and it should be warnx not
warn anwyay.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: Adaptive timeout
Rusty Russell [Tue, 29 Jul 2008 14:58:36 +0000]
lguest: Adaptive timeout

Since the correct timeout value varies, use a heuristic which adjusts
the timeout depending on how many packets we've seen.  This gives
slightly worse results, but doesn't need tweaking when GSO is
introduced.

500 usec 19.1887 xmit 561141 recv 1 timeout 559657
Dynamic (278) 20.1974 xmit 214510 recv 5 timeout 214491 usec 278

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: Tell Guest net not to notify us on every packet xmit
Rusty Russell [Tue, 29 Jul 2008 14:58:35 +0000]
lguest: Tell Guest net not to notify us on every packet xmit

virtio_ring has the ability to suppress notifications.  This prevents
a guest exit for every packet, but we need to set a timer on packet
receipt to re-check if there were any remaining packets.

Here are the times for 1G TCP Guest->Host with different timeout
settings (it matters because the TCP window doesn't grow big enough to
fill the entire buffer):

Timeout value Seconds Xmit/Recv/Timeout
None (before) 25.3784 xmit 7750233 recv 1
2500 usec 62.5119 xmit 207020 recv 2 timeout 207020
1000 usec 34.5379 xmit 207003 recv 2 timeout 207003
750 usec 29.2305 xmit 207002 recv 1 timeout 207002
500 usec 19.1887 xmit 561141 recv 1 timeout 559657
250 usec 20.0465 xmit 214128 recv 2 timeout 214110
100 usec 19.2583 xmit 561621 recv 1 timeout 560153

(Note that these values are sensitive to the GSO patches which come
 later, and probably other traffic-related variables, so take with a
 large grain of salt).

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: net block unneeded receive queue update notifications
Rusty Russell [Tue, 29 Jul 2008 14:58:35 +0000]
lguest: net block unneeded receive queue update notifications

Number of exits transmitting 10GB Guest->Host before:
network xmit 7858610 recv 118136

After:
network xmit 7750233 recv 1

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: wrap last_avail accesses.
Rusty Russell [Tue, 29 Jul 2008 14:58:34 +0000]
lguest: wrap last_avail accesses.

To simplify the transition to when we publish indices in the ring
(and make shuffling my patch queue easier), wrap them in a lg_last_avail()
macro.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: use cpu capability accessors
Andrew Morton [Mon, 9 Jun 2008 23:22:48 +0000]
lguest: use cpu capability accessors

To support my little make-x86-bitops-use-proper-typechecking projectlet.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: virtio-rng support
Rusty Russell [Tue, 29 Jul 2008 14:58:33 +0000]
lguest: virtio-rng support

This is a simple patch to add support for the virtio "hardware random
generator" to lguest.  It gets about 1.2 MB/sec reading from /dev/hwrng
in the guest.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: Support assigning a MAC address
Mark McLoughlin [Tue, 29 Jul 2008 14:58:33 +0000]
lguest: Support assigning a MAC address

If you've got a nice DHCP configuration which maps MAC
addresses to specific IP addresses, then you're going to
want to start your guest with one of those MAC addresses.

Also, in Fedora, we have persistent network interface naming
based on the MAC address, so with randomly assigned
addresses you're soon going to hit eth13. Who knows what
will happen then!

Allow assigning a MAC address to the network interface with
e.g.

  --tunnet=bridge:eth0:00:FF:95:6B:DA:3D

or:

  --tunnet=192.168.121.1:00:FF:95:6B:DA:3D

which is pretty unintelligable, but ...

(includes Rusty's minor rework)

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: Don't leak /dev/zero fd
Mark McLoughlin [Fri, 13 Jun 2008 13:04:58 +0000]
lguest: Don't leak /dev/zero fd

Signed-off-by: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: fix verbose printing of device features.
Rusty Russell [Tue, 29 Jul 2008 14:58:32 +0000]
lguest: fix verbose printing of device features.

%02x is more appropriate for bytes than %08x.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: fix switcher_page leak on unload
Johannes Weiner [Tue, 8 Jul 2008 08:29:42 +0000]
lguest: fix switcher_page leak on unload

map_switcher allocates the array, unmap_switcher has to free it
accordingly.

Signed-off-by: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: Guest int3 fix
Rusty Russell [Tue, 29 Jul 2008 14:58:31 +0000]
lguest: Guest int3 fix

Ron Minnich noticed that guest userspace gets a GPF when it tries to int3:
we need to copy the privilege level from the guest-supplied IDT to the real
IDT.  int3 is the only common case where guest userspace expects to invoke
an interrupt, so that's the symptom of failing to do this.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

11 years agolguest: set max_pfn_mapped, growl loudly at Yinghai Lu
Rusty Russell [Tue, 29 Jul 2008 14:58:29 +0000]
lguest: set max_pfn_mapped, growl loudly at Yinghai Lu

6af61a7614a306fe882a0c2b4ddc63b65aa66efc 'x86: clean up max_pfn_mapped
usage - 32-bit' makes the following comment:

    XEN PV and lguest may need to assign max_pfn_mapped too.

But no CC.  Yinghai, wasting fellow developers' time is a VERY bad
habit.  If you do it again, I will hunt you down and try to extract
the three hours of my life I just lost :)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>

11 years agomfd: accept pure device as a parent, not only platform_device
Dmitry Baryshkov [Mon, 28 Jul 2008 23:30:26 +0000]
mfd: accept pure device as a parent, not only platform_device

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

11 years agoinclude/asm-generic/pgtable-nopmd.h: macros are noxious, reason #435
Andrew Morton [Mon, 28 Jul 2008 22:46:40 +0000]
include/asm-generic/pgtable-nopmd.h: macros are noxious, reason #435

arch/x86/mm/pgtable.c: In function 'pgd_mop_up_pmds':
  arch/x86/mm/pgtable.c:194: warning: unused variable 'pmd'

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agosh7760fb: write colormap value to hardware
Manuel Lauss [Mon, 28 Jul 2008 22:46:39 +0000]
sh7760fb: write colormap value to hardware

The computed color value is never actually written to hardware
colormap register.

Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Cc: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Cc: Munakata Hisao <munakata.hisao@renesas.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoeCryptfs: use page_alloc not kmalloc to get a page of memory
Eric Sandeen [Mon, 28 Jul 2008 22:46:39 +0000]
eCryptfs: use page_alloc not kmalloc to get a page of memory

With SLUB debugging turned on in 2.6.26, I was getting memory corruption
when testing eCryptfs.  The root cause turned out to be that eCryptfs was
doing kmalloc(PAGE_CACHE_SIZE); virt_to_page() and treating that as a nice
page-aligned chunk of memory.  But at least with SLUB debugging on, this
is not always true, and the page we get from virt_to_page does not
necessarily match the PAGE_CACHE_SIZE worth of memory we got from kmalloc.

My simple testcase was 2 loops doing "rm -f fileX; cp /tmp/fileX ." for 2
different multi-megabyte files.  With this change I no longer see the
corruption.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agogpio: fix build on CONFIG_GPIO_SYSFS=n
Atsushi Nemoto [Mon, 28 Jul 2008 22:46:38 +0000]
gpio: fix build on CONFIG_GPIO_SYSFS=n

If CONFIG_GENERIC_GPIO=y && CONFIG_GPIO_SYSFS=n, gpio_export() in
asm-generic/gpio.h refers -ENOSYS and causes build error.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agobio-integrity: remove EXPORT_SYMBOL for bio_integrity_init_slab()
Yoichi Yuasa [Mon, 28 Jul 2008 22:46:37 +0000]
bio-integrity: remove EXPORT_SYMBOL for bio_integrity_init_slab()

I got section mismatch message about bio_integrity_init_slab().

WARNING: fs/built-in.o(__ksymtab+0xb60): Section mismatch in reference from the variable __ksymtab_bio_integrity_init_slab to the function .init.text:bio_integrity_init_slab()

The symbol bio_integrity_init_slab is exported and annotated __init Fix
this by removing the __init annotation of bio_integrity_init_slab or drop
the export.

It only call from init_bio().  The EXPORT_SYMBOL() can be removed.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agovfs: pagecache usage optimization for pagesize!=blocksize
Hisashi Hifumi [Mon, 28 Jul 2008 22:46:36 +0000]
vfs: pagecache usage optimization for pagesize!=blocksize

When we read some part of a file through pagecache, if there is a
pagecache of corresponding index but this page is not uptodate, read IO
is issued and this page will be uptodate.

I think this is good for pagesize == blocksize environment but there is
room for improvement on pagesize != blocksize environment.  Because in
this case a page can have multiple buffers and even if a page is not
uptodate, some buffers can be uptodate.

So I suggest that when all buffers which correspond to a part of a file
that we want to read are uptodate, use this pagecache and copy data from
this pagecache to user buffer even if a page is not uptodate.  This can
reduce read IO and improve system throughput.

I wrote a benchmark program and got result number with this program.

This benchmark do:

  1: mount and open a test file.

  2: create a 512MB file.

  3: close a file and umount.

  4: mount and again open a test file.

  5: pwrite randomly 300000 times on a test file.  offset is aligned
     by IO size(1024bytes).

  6: measure time of preading randomly 100000 times on a test file.

The result was:
2.6.26
        330 sec

2.6.26-patched
        226 sec

Arch:i386
Filesystem:ext3
Blocksize:1024 bytes
Memory: 1GB

On ext3/4, a file is written through buffer/block.  So random read/write
mixed workloads or random read after random write workloads are optimized
with this patch under pagesize != blocksize environment.  This test result
showed this.

The benchmark program is as follows:

#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <unistd.h>
#include <time.h>
#include <stdlib.h>
#include <string.h>
#include <sys/mount.h>

#define LEN 1024
#define LOOP 1024*512 /* 512MB */

main(void)
{
unsigned long i, offset, filesize;
int fd;
char buf[LEN];
time_t t1, t2;

if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
memset(buf, 0, LEN);
fd = open("/root/test1/testfile", O_CREAT|O_RDWR|O_TRUNC);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}
for (i = 0; i < LOOP; i++)
write(fd, buf, LEN);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
if (mount("/dev/sda1", "/root/test1/", "ext3", 0, 0) < 0) {
perror("cannot mount\n");
exit(1);
}
fd = open("/root/test1/testfile", O_RDWR);
if (fd < 0) {
perror("cannot open file\n");
exit(1);
}

filesize = LEN * LOOP;
for (i = 0; i < 300000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pwrite(fd, buf, LEN, offset);
}
printf("start test\n");
time(&t1);
for (i = 0; i < 100000; i++){
offset = (random() % filesize) & (~(LEN - 1));
pread(fd, buf, LEN, offset);
}
time(&t2);
printf("%ld sec\n", t2-t1);
close(fd);
if (umount("/root/test1/") < 0) {
perror("cannot umount\n");
exit(1);
}
}

Signed-off-by: Hisashi Hifumi <hifumi.hisashi@oss.ntt.co.jp>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jan Kara <jack@ucw.cz>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agokdump: update kdump documentation as kexec-tools-resting has been renamed kexec-tools
Simon Horman [Mon, 28 Jul 2008 22:46:34 +0000]
kdump: update kdump documentation as kexec-tools-resting has been renamed kexec-tools

Signed-off-by: Simon Horman <horms@verge.net.au>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agospi_s3c24xx: really assign busnum
Ben Dooks [Mon, 28 Jul 2008 22:46:33 +0000]
spi_s3c24xx: really assign busnum

The original "Pass the bus number we expect the S3C24XX SPI driver to
attach to via the platform data." [1] patch was mis-sent, and missed two
important parts of the diff, which was to actually set the bus_num field
and add the relevant field to the platform data.

The previous commit 50f426b55d919dd017af35bb6a08753d1f262920 promised to
add a bus_num field, but failed to include the two hunks that added this
field to include/asm-arm/arch-s3c2410/spi.h and then pass it to the spi
core when creating the new master field in drivers/spi/spi_s3c24xx.c.

[1] git commit 50f426b55d919dd017af35bb6a08753d1f262920

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agompc52xx_psc_spi: fix block transfer
Luotao Fu [Mon, 28 Jul 2008 22:46:32 +0000]
mpc52xx_psc_spi: fix block transfer

The block transfer routine in the mpc52xx psc spi driver misinterpret
the datasheet.  According to the processor datasheet the chipselect is
held as long as the EOF is not written.

Theoretically blocks of any sizes can be transferred in this way.  The
old routine however writes an EOF after every word, which has the size
of size_of_word.  This makes the transfer slow.

Also fixed some duplicate code.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomm/hugetlb.c must #include <asm/io.h>
Adrian Bunk [Mon, 28 Jul 2008 22:46:30 +0000]
mm/hugetlb.c must #include <asm/io.h>

This patch fixes the following build error on sh caused by commit
aa888a74977a8f2120ae9332376e179c39a6b07d ("hugetlb: support larger than
MAX_ORDER"):

  mm/hugetlb.c: In function 'alloc_bootmem_huge_page':
  mm/hugetlb.c:958: error: implicit declaration of function 'virt_to_phys'

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agommu-notifiers: core
Andrea Arcangeli [Mon, 28 Jul 2008 22:46:29 +0000]
mmu-notifiers: core

With KVM/GFP/XPMEM there isn't just the primary CPU MMU pointing to pages.
 There are secondary MMUs (with secondary sptes and secondary tlbs) too.
sptes in the kvm case are shadow pagetables, but when I say spte in
mmu-notifier context, I mean "secondary pte".  In GRU case there's no
actual secondary pte and there's only a secondary tlb because the GRU
secondary MMU has no knowledge about sptes and every secondary tlb miss
event in the MMU always generates a page fault that has to be resolved by
the CPU (this is not the case of KVM where the a secondary tlb miss will
walk sptes in hardware and it will refill the secondary tlb transparently
to software if the corresponding spte is present).  The same way
zap_page_range has to invalidate the pte before freeing the page, the spte
(and secondary tlb) must also be invalidated before any page is freed and
reused.

Currently we take a page_count pin on every page mapped by sptes, but that
means the pages can't be swapped whenever they're mapped by any spte
because they're part of the guest working set.  Furthermore a spte unmap
event can immediately lead to a page to be freed when the pin is released
(so requiring the same complex and relatively slow tlb_gather smp safe
logic we have in zap_page_range and that can be avoided completely if the
spte unmap event doesn't require an unpin of the page previously mapped in
the secondary MMU).

The mmu notifiers allow kvm/GRU/XPMEM to attach to the tsk->mm and know
when the VM is swapping or freeing or doing anything on the primary MMU so
that the secondary MMU code can drop sptes before the pages are freed,
avoiding all page pinning and allowing 100% reliable swapping of guest
physical address space.  Furthermore it avoids the code that teardown the
mappings of the secondary MMU, to implement a logic like tlb_gather in
zap_page_range that would require many IPI to flush other cpu tlbs, for
each fixed number of spte unmapped.

To make an example: if what happens on the primary MMU is a protection
downgrade (from writeable to wrprotect) the secondary MMU mappings will be
invalidated, and the next secondary-mmu-page-fault will call
get_user_pages and trigger a do_wp_page through get_user_pages if it
called get_user_pages with write=1, and it'll re-establishing an updated
spte or secondary-tlb-mapping on the copied page.  Or it will setup a
readonly spte or readonly tlb mapping if it's a guest-read, if it calls
get_user_pages with write=0.  This is just an example.

This allows to map any page pointed by any pte (and in turn visible in the
primary CPU MMU), into a secondary MMU (be it a pure tlb like GRU, or an
full MMU with both sptes and secondary-tlb like the shadow-pagetable layer
with kvm), or a remote DMA in software like XPMEM (hence needing of
schedule in XPMEM code to send the invalidate to the remote node, while no
need to schedule in kvm/gru as it's an immediate event like invalidating
primary-mmu pte).

At least for KVM without this patch it's impossible to swap guests
reliably.  And having this feature and removing the page pin allows
several other optimizations that simplify life considerably.

Dependencies:

1) mm_take_all_locks() to register the mmu notifier when the whole VM
   isn't doing anything with "mm".  This allows mmu notifier users to keep
   track if the VM is in the middle of the invalidate_range_begin/end
   critical section with an atomic counter incraese in range_begin and
   decreased in range_end.  No secondary MMU page fault is allowed to map
   any spte or secondary tlb reference, while the VM is in the middle of
   range_begin/end as any page returned by get_user_pages in that critical
   section could later immediately be freed without any further
   ->invalidate_page notification (invalidate_range_begin/end works on
   ranges and ->invalidate_page isn't called immediately before freeing
   the page).  To stop all page freeing and pagetable overwrites the
   mmap_sem must be taken in write mode and all other anon_vma/i_mmap
   locks must be taken too.

2) It'd be a waste to add branches in the VM if nobody could possibly
   run KVM/GRU/XPMEM on the kernel, so mmu notifiers will only enabled if
   CONFIG_KVM=m/y.  In the current kernel kvm won't yet take advantage of
   mmu notifiers, but this already allows to compile a KVM external module
   against a kernel with mmu notifiers enabled and from the next pull from
   kvm.git we'll start using them.  And GRU/XPMEM will also be able to
   continue the development by enabling KVM=m in their config, until they
   submit all GRU/XPMEM GPLv2 code to the mainline kernel.  Then they can
   also enable MMU_NOTIFIERS in the same way KVM does it (even if KVM=n).
   This guarantees nobody selects MMU_NOTIFIER=y if KVM and GRU and XPMEM
   are all =n.

The mmu_notifier_register call can fail because mm_take_all_locks may be
interrupted by a signal and return -EINTR.  Because mmu_notifier_reigster
is used when a driver startup, a failure can be gracefully handled.  Here
an example of the change applied to kvm to register the mmu notifiers.
Usually when a driver startups other allocations are required anyway and
-ENOMEM failure paths exists already.

 struct  kvm *kvm_arch_create_vm(void)
 {
        struct kvm *kvm = kzalloc(sizeof(struct kvm), GFP_KERNEL);
+       int err;

        if (!kvm)
                return ERR_PTR(-ENOMEM);

        INIT_LIST_HEAD(&kvm->arch.active_mmu_pages);

+       kvm->arch.mmu_notifier.ops = &kvm_mmu_notifier_ops;
+       err = mmu_notifier_register(&kvm->arch.mmu_notifier, current->mm);
+       if (err) {
+               kfree(kvm);
+               return ERR_PTR(err);
+       }
+
        return kvm;
 }

mmu_notifier_unregister returns void and it's reliable.

The patch also adds a few needed but missing includes that would prevent
kernel to compile after these changes on non-x86 archs (x86 didn't need
them by luck).

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix mm/filemap_xip.c build]
[akpm@linux-foundation.org: fix mm/mmu_notifier.c build]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kanoj Sarcar <kanojsarcar@yahoo.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Chris Wright <chrisw@redhat.com>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Izik Eidus <izike@qumranet.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agommu-notifiers: add mm_take_all_locks() operation
Andrea Arcangeli [Mon, 28 Jul 2008 22:46:26 +0000]
mmu-notifiers: add mm_take_all_locks() operation

mm_take_all_locks holds off reclaim from an entire mm_struct.  This allows
mmu notifiers to register into the mm at any time with the guarantee that
no mmu operation is in progress on the mm.

This operation locks against the VM for all pte/vma/mm related operations
that could ever happen on a certain mm.  This includes vmtruncate,
try_to_unmap, and all page faults.

The caller must take the mmap_sem in write mode before calling
mm_take_all_locks().  The caller isn't allowed to release the mmap_sem
until mm_drop_all_locks() returns.

mmap_sem in write mode is required in order to block all operations that
could modify pagetables and free pages without need of altering the vma
layout (for example populate_range() with nonlinear vmas).  It's also
needed in write mode to avoid new anon_vmas to be associated with existing
vmas.

A single task can't take more than one mm_take_all_locks() in a row or it
would deadlock.

mm_take_all_locks() and mm_drop_all_locks are expensive operations that
may have to take thousand of locks.

mm_take_all_locks() can fail if it's interrupted by signals.

When mmu_notifier_register returns, we must be sure that the driver is
notified if some task is in the middle of a vmtruncate for the 'mm' where
the mmu notifier was registered (mmu_notifier_invalidate_range_start/end
is run around the vmtruncation but mmu_notifier_register can run after
mmu_notifier_invalidate_range_start and before
mmu_notifier_invalidate_range_end).  Same problem for rmap paths.  And
we've to remove page pinning to avoid replicating the tlb_gather logic
inside KVM (and GRU doesn't work well with page pinning regardless of
needing tlb_gather), so without mm_take_all_locks when vmtruncate frees
the page, kvm would have no way to notice that it mapped into sptes a page
that is going into the freelist without a chance of any further
mmu_notifier notification.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kanoj Sarcar <kanojsarcar@yahoo.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Chris Wright <chrisw@redhat.com>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Izik Eidus <izike@qumranet.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agommu-notifiers: add list_del_init_rcu()
Andrea Arcangeli [Mon, 28 Jul 2008 22:46:22 +0000]
mmu-notifiers: add list_del_init_rcu()

Introduce list_del_init_rcu() and document it.

Signed-off-by: Andrea Arcangeli <andrea@qumranet.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Jack Steiner <steiner@sgi.com>
Cc: Robin Holt <holt@sgi.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Kanoj Sarcar <kanojsarcar@yahoo.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Avi Kivity <avi@qumranet.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Chris Wright <chrisw@redhat.com>
Cc: Marcelo Tosatti <marcelo@kvack.org>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Cc: "Paul E. McKenney" <paulmck@us.ibm.com>
Cc: Izik Eidus <izike@qumranet.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoarm: fix HAVE_CLK merge goof
David Brownell [Mon, 28 Jul 2008 22:46:22 +0000]
arm: fix HAVE_CLK merge goof

This fixes a merge goof whereby ARCH_EP93XX got the "select HAVE_CLK" line
which belongs instead with ARCH_AT91.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago__ratelimit() cpu flags can't be static
Alexey Dobriyan [Mon, 28 Jul 2008 22:46:21 +0000]
__ratelimit() cpu flags can't be static

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dave Young <hidave.darkstar@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agotmpfs: fix kernel BUG in shmem_delete_inode
Hugh Dickins [Mon, 28 Jul 2008 22:46:19 +0000]
tmpfs: fix kernel BUG in shmem_delete_inode

SuSE's insserve initscript ordering program hits kernel BUG at mm/shmem.c:814
on 2.6.26.  It's using posix_fadvise on directories, and the shmem_readpage
method added in 2.6.23 is letting POSIX_FADV_WILLNEED allocate useless pages
to a tmpfs directory, incrementing i_blocks count but never decrementing it.

Fix this by assigning shmem_aops (pointing to readpage and writepage and
set_page_dirty) only when it's needed, on a regular file or a long symlink.

Many thanks to Kel for outstanding bugreport and steps to reproduce it.

Reported-by: Kel Modderman <kel@otaku42.de>
Tested-by: Kel Modderman <kel@otaku42.de>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Cc: <stable@kernel.org> [2.6.25.x, 2.6.26.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoexec: include pagemap.h again to fix build
Hugh Dickins [Mon, 28 Jul 2008 22:46:18 +0000]
exec: include pagemap.h again to fix build

Fix compilation errors on avr32 and without CONFIG_SWAP, introduced by
ba92a43dbaee339cf5915ef766d3d3ffbaaf103c ("exec: remove some includes")

  In file included from include/asm/tlb.h:24,
                   from fs/exec.c:55:
  include/asm-generic/tlb.h: In function 'tlb_flush_mmu':
  include/asm-generic/tlb.h:76: error: implicit declaration of function 'release_pages'
  include/asm-generic/tlb.h: In function 'tlb_remove_page':
  include/asm-generic/tlb.h:105: error: implicit declaration of function 'page_cache_release'
  make[1]: *** [fs/exec.o] Error 1

This straightforward part-revert is nobody's favourite patch to address
the underlying tlb.h needs swap.h needs pagemap.h (but sparc won't like
that) mess; but appropriate to fix the build now before any overhaul.

Reported-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Reported-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Hugh Dickins <hugh@veritas.com>
Tested-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomfd: add platform_data to mfd_cell
Mike Rapoport [Mon, 28 Jul 2008 23:23:32 +0000]
mfd: add platform_data to mfd_cell

Adding platform_data to mfd_cell allows passing of platform data directly
to the platform_device created for each cell and thus reuse of existing
drivers.
On the other side it can be used as a hook to mfd_cell itself
removing the need in mfd_get_cell method.

Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

11 years agox86/PCI: use dev_printk when possible
Bjorn Helgaas [Wed, 23 Jul 2008 23:00:13 +0000]
x86/PCI: use dev_printk when possible

Convert printks to use dev_printk().

I converted DBG() to dev_dbg().  This DBG() is from arch/x86/pci/pci.h and
requires source-code modification to enable, so dev_dbg() seems roughly
equivalent.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoMerge branch 'core/generic-dma-coherent' of git://git.kernel.org/pub/scm/linux/kernel...
Jesse Barnes [Mon, 28 Jul 2008 22:15:46 +0000]
Merge branch 'core/generic-dma-coherent' of git://git./linux/kernel/git/tip/linux-2.6-tip into for-linus

11 years agoMerge branch 'cpus4096-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
Linus Torvalds [Mon, 28 Jul 2008 22:13:42 +0000]
Merge branch 'cpus4096-v2' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'cpus4096-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  cpu masks: optimize and clean up cpumask_of_cpu()
  cpumask: export cpumask_of_cpu_map
  cpumask: change cpumask_of_cpu_ptr to use new cpumask_of_cpu
  cpumask: put cpumask_of_cpu_map in the initdata section
  cpumask: make cpumask_of_cpu_map generic

11 years agoipwireless: fix compile failure
James Bottomley [Mon, 28 Jul 2008 22:11:44 +0000]
ipwireless: fix compile failure

There's a brown paper bag compile failure introduced by this patch

commit a01386924874c4d6d67f8a34e66f04452c2abb69
Author: David Sterba <dsterba@suse.cz>
Date:   Mon Jul 28 16:53:32 2008 +0200

    ipwireless: Preallocate received packet buffers with MRU size

Really, it can't ever have been even compile tested.  It looks like the
closing bracket is in the wrong place, so this is the fix.

Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoPCI: add D3 power state avoidance quirk
Alan Cox [Thu, 24 Jul 2008 16:18:38 +0000]
PCI: add D3 power state avoidance quirk

Libata has some hacks to deal with certain controllers going silly in D3
state. The right way to handle this is to keep a PCI device flag for
such devices. That can then be generalised for no ATA devices with power
problems.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoMerge branch 'linus' into core/generic-dma-coherent
Ingo Molnar [Mon, 28 Jul 2008 22:07:55 +0000]
Merge branch 'linus' into core/generic-dma-coherent

Conflicts:

arch/x86/Kconfig

Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoPCI: fix bogus "'device' may be used uninitialized" warning in pci_slot
Matthew Wilcox [Tue, 22 Jul 2008 18:37:17 +0000]
PCI: fix bogus "'device' may be used uninitialized" warning in pci_slot

I get warnings about 'device' possibly being used uninitialised.  While
I can deduce this is not true, it seems that GCC can't.  This patch
changes `check_slot' to return device on success and -1 on error, which
shuts GCC up.

Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoPCI: add an option to allow ASPM enabled forcibly
Shaohua Li [Wed, 23 Jul 2008 02:32:42 +0000]
PCI: add an option to allow ASPM enabled forcibly

A new option, pcie_aspm=force, will force ASPM to be enabled, even on system
with PCIe 1.0 devices.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoPCI: disable ASPM on pre-1.1 PCIe devices
Shaohua Li [Wed, 23 Jul 2008 02:32:31 +0000]
PCI: disable ASPM on pre-1.1 PCIe devices

Disable ASPM on pre-1.1 PCIe devices, as many of them don't implement it
correctly.

Tested-by: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoPCI: disable ASPM per ACPI FADT setting
Shaohua Li [Wed, 23 Jul 2008 02:32:24 +0000]
PCI: disable ASPM per ACPI FADT setting

The ACPI FADT table includes an ASPM control bit. If the bit is set, do
not enable ASPM since it may indicate that the platform doesn't actually
support the feature.

Tested-by: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoPCI MSI: Don't disable MSIs if the mask bit isn't supported
Matthew Wilcox [Fri, 25 Jul 2008 21:42:58 +0000]
PCI MSI: Don't disable MSIs if the mask bit isn't supported

David Vrabel has a device which generates an interrupt storm on the INTx
pin if we disable MSI interrupts altogether.  Masking interrupts is only
a performance optimisation, so we can ignore the request to mask the
interrupt.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoMerge branch 'linus' into cpus4096
Ingo Molnar [Mon, 28 Jul 2008 21:32:00 +0000]
Merge branch 'linus' into cpus4096

Conflicts:

kernel/stop_machine.c

Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'x86/iommu' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux...
Jesse Barnes [Mon, 28 Jul 2008 21:31:10 +0000]
Merge branch 'x86/iommu' of git://git./linux/kernel/git/tip/linux-2.6-tip into for-linus

11 years agoPCI: handle 64-bit resources better on 32-bit machines
Matthew Wilcox [Mon, 28 Jul 2008 17:39:00 +0000]
PCI: handle 64-bit resources better on 32-bit machines

If the kernel is configured to support 64-bit resources on a 32-bit
machine, we can support 64-bit BARs properly.  Just change the condition
to check sizeof(resource_size_t) instead of BITS_PER_LONG.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoPCI: rewrite PCI BAR reading code
Matthew Wilcox [Mon, 28 Jul 2008 17:38:59 +0000]
PCI: rewrite PCI BAR reading code

Factor out the code to read one BAR from the loop in pci_read_bases into
a new function, __pci_read_base.  The new code is slightly more
readable, better commented and removes the ifdef.

Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agocpu masks: optimize and clean up cpumask_of_cpu()
Linus Torvalds [Mon, 28 Jul 2008 18:32:33 +0000]
cpu masks: optimize and clean up cpumask_of_cpu()

Clean up and optimize cpumask_of_cpu(), by sharing all the zero words.

Instead of stupidly generating all possible i=0...NR_CPUS 2^i patterns
creating a huge array of constant bitmasks, realize that the zero words
can be shared.

In other words, on a 64-bit architecture, we only ever need 64 of these
arrays - with a different bit set in one single world (with enough zero
words around it so that we can create any bitmask by just offsetting in
that big array). And then we just put enough zeroes around it that we
can point every single cpumask to be one of those things.

So when we have 4k CPU's, instead of having 4k arrays (of 4k bits each,
with one bit set in each array - 2MB memory total), we have exactly 64
arrays instead, each 8k bits in size (64kB total).

And then we just point cpumask(n) to the right position (which we can
calculate dynamically). Once we have the right arrays, getting
"cpumask(n)" ends up being:

  static inline const cpumask_t *get_cpu_mask(unsigned int cpu)
  {
          const unsigned long *p = cpu_bit_bitmap[1 + cpu % BITS_PER_LONG];
          p -= cpu / BITS_PER_LONG;
          return (const cpumask_t *)p;
  }

This brings other advantages and simplifications as well:

 - we are not wasting memory that is just filled with a single bit in
   various different places

 - we don't need all those games to re-create the arrays in some dense
   format, because they're already going to be dense enough.

if we compile a kernel for up to 4k CPU's, "wasting" that 64kB of memory
is a non-issue (especially since by doing this "overlapping" trick we
probably get better cache behaviour anyway).

[ mingo@elte.hu:

  Converted Linus's mails into a commit. See:

     http://lkml.org/lkml/2008/7/27/156
     http://lkml.org/lkml/2008/7/28/320

  Also applied a family filter - which also has the side-effect of leaving
  out the bits where Linus calls me an idio... Oh, never mind ;-)
]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Cc: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

11 years agoMerge branch 'linus' into cpus4096
Ingo Molnar [Mon, 28 Jul 2008 19:14:43 +0000]
Merge branch 'linus' into cpus4096

11 years agoPCI: document pci_target_state
Jesse Barnes [Mon, 28 Jul 2008 18:49:26 +0000]
PCI: document pci_target_state

The empty kdoc was causing warnings, so provide some actual documentation.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoPCI hotplug: fix typo in pcie hotplug output
Jesse Barnes [Thu, 24 Jul 2008 23:43:43 +0000]
PCI hotplug: fix typo in pcie hotplug output

Comamnd->Command

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Mon, 28 Jul 2008 16:59:26 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: add driver for Atmel integrated touchscreen controller
  Input: ads7846 - optimize order of calculating Rt in ads7846_rx()
  Input: ads7846 - fix sparse endian warnings
  Input: uinput - remove duplicate include
  Input: serio - offload resume to kseriod
  Input: serio - mark serio_register_driver() __must_check

11 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm
Linus Torvalds [Mon, 28 Jul 2008 16:46:00 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/teigland/dlm

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm:
  dlm: fix uninitialized variable for search_rsb_list callers
  dlm: release socket on error
  dlm: fix basts for granted CW waiting PR/CW
  dlm: check for null in device_write

11 years agomfd: Coding style fixes
Ben Dooks [Mon, 28 Jul 2008 16:29:09 +0000]
mfd: Coding style fixes

Fix some coding style fixes in the mfd core driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

11 years agomfd: Use to_platform_device instead of container_of
Ben Dooks [Mon, 28 Jul 2008 16:26:42 +0000]
mfd: Use to_platform_device instead of container_of

Convert mfd_remove_devices_fn() to use to_platform_device()
instead of doing container_of().

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Acked-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>

11 years agoMerge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
Linus Torvalds [Mon, 28 Jul 2008 16:05:35 +0000]
Merge branch 'merge' of git://git./linux/kernel/git/benh/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc: Disable 64K hugetlb support when doing 64K SPU mappings
  powerpc/powermac: Fixup default serial port device for pmac_zilog
  powerpc/powermac: Use sane default baudrate for SCC debugging
  powerpc/mm: Implement _PAGE_SPECIAL & pte_special() for 64-bit
  powerpc: Show processor cache information in sysfs
  powerpc: Make core id information available to userspace
  powerpc: Make core sibling information available to userspace
  powerpc/vio: More fallout from dma_mapping_error API change
  ibmveth: Fix multiple errors with dma_mapping_error conversion
  powerpc/pseries: Fix CMO sysdev attribute API change fallout
  powerpc: Enable tracehook for the architecture
  powerpc: Add TIF_NOTIFY_RESUME support for tracehook
  powerpc: Add asm/syscall.h with the tracehook entry points
  powerpc: Make syscall tracing use tracehook.h helpers
  powerpc: Call tracehook_signal_handler() when setting up signal frames
  powerpc: Update cpu_sibling_maps dynamically
  powerpc: register_cpu_online should be __cpuinit
  powerpc: kill useless SMT code in prom_hold_cpus
  powerpc: Fix 8xx build failure
  powerpc: Fix vio build warnings
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6
Linus Torvalds [Mon, 28 Jul 2008 15:41:56 +0000]
Merge git://git./linux/kernel/git/kkeil/ISDN-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6:
  Remove deprecated virt_to_bus()

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
Linus Torvalds [Mon, 28 Jul 2008 15:41:13 +0000]
Merge git://git./linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (72 commits)
  sh: SuperH Mobile CEU and camera platform data for AP325RXA
  sh: Update smc911x platform data for AP325RXA
  sh: SuperH Mobile LCDC platform data for AP325RXA
  sh: Add SuperH Mobile CEU platform data for Migo-R
  sh: Add SuperH Mobile LCDC platform data for Migo-R
  sh: Move asid_cache() out of ifdef to fix SH-3/4 nommu build.
  sh: Workaround for __put_user_asm() bug with gcc 4.x on big-endian.
  sh: Wire up new syscalls.
  sh: fix uImage Entry Point
  sh_keysc: remove request_mem_region() and release_mem_region()
  sh: Don't miss pending signals returning to user mode after signal processing
  sh: Use clk_always_enable() on sh7366
  sh: Use clk_always_enable() on sh7343 / SE77343
  sh: Use clk_always_enable() on sh7722 / Migo-R / SE7722
  sh: Use clk_always_enable() on sh7723 / ap325rxa
  sh: Introduce clk_always_enable() function
  sh: Show all clocks and their state in /proc/clocks
  sh: Merge sh7343 and sh7722 clock code
  sh: Add SuperH Mobile MSTPCR bits to clock framework
  sh: Use arch_flags to simplify sh7722 siu clock code
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus
Linus Torvalds [Mon, 28 Jul 2008 15:37:46 +0000]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  stop_machine: fix up ftrace.c
  stop_machine: Wean existing callers off stop_machine_run()
  stop_machine(): stop_machine_run() changed to use cpu mask
  Hotplug CPU: don't check cpu_online after take_cpu_down
  Simplify stop_machine
  stop_machine: add ALL_CPUS option
  module: fix build warning with !CONFIG_KALLSYMS

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb
Linus Torvalds [Mon, 28 Jul 2008 15:35:40 +0000]
Merge git://git./linux/kernel/git/mchehab/v4l-dvb

* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: (98 commits)
  V4L/DVB (8549): mxl5007: Fix an error at include file
  V4L/DVB (8548): pwc: Fix compilation
  V4L/DVB (8546): add tuner-3036 and dpc7146 drivers to feature-removal-schedule.txt
  V4L/DVB (8546): saa7146: fix read from uninitialized memory
  V4L/DVB (8544): gspca: probe/open race.
  V4L/DVB (8543): em28xx: Rename #define for Compro VideoMate ForYou/Stereo
  V4L/DVB (8542): em28xx: AMD ATI TV Wonder HD 600 entry at cards struct is duplicated
  V4L/DVB (8541): em28xx: HVR-950 entry is duplicated.
  V4L/DVB (8540): em28xx-cards: Add Compro VideoMate ForYou/Stereo model
  V4L/DVB (8539): em28xx-cards: New supported IDs for analog models
  V4L/DVB (8538): em28xx-cards: Add GrabBeeX+ USB2800 model
  V4L/DVB (8534): remove select's of FW_LOADER
  V4L/DVB (8522): videodev2: Fix merge conflict
  V4L/DVB (8532): mxl5007t: remove excessive locks
  V4L/DVB (8531): mxl5007t: move i2c gate handling outside of mutex protected code blocks
  V4L/DVB (8530): au0828: add support for new revision of HVR950Q
  V4L/DVB (8529): mxl5007t: enable _init and _sleep power management functionality
  V4L/DVB (8528): add support for MaxLinear MxL5007T silicon tuner
  V4L/DVB (8526): saa7146: fix VIDIOC_ENUM_FMT
  V4L/DVB (8525): fix a few assorted spelling mistakes.
  ...

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
Linus Torvalds [Mon, 28 Jul 2008 15:33:25 +0000]
Merge git://git./linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Set CONFIG_HAVE_ARCH_TRACEHOOK
  sparc: Add task_pt_regs().
  sparc: Add call to tracehook_signal_handler().
  sparc: Create and use TIF_NOTIFY_RESUME.
  sparc: Use tracehook routines in syscall_trace().
  sparc64: tracehook: CONFIG_HAVE_ARCH_TRACEHOOK
  sparc: Add user_stack_pointer().
  sparc64: tracehook_signal_handler
  sparc64: tracehook: TIF_NOTIFY_RESUME
  sparc: Add asm/syscall.h
  sparc64: tracehook syscall
  sparc: enable headers_export again
  sparc, sparc64: use arch/sparc/include

11 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Mon, 28 Jul 2008 15:32:25 +0000]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  net: missing bits of net-namespace / sysctl
  ipcomp: Fix warnings after ipcomp consolidation.
  dccp: Add check for truncated ICMPv6 DCCP error packets
  dccp: Fix incorrect length check for ICMPv4 packets
  dccp: Add check for sequence number in ICMPv6 message
  dccp: Fix sequence number check for ICMPv4 packets
  dccp: Bug-Fix - AWL was never updated
  dccp: Allow to distinguish original and retransmitted packets

11 years agoSubmittingPatches: add git pull & diffstat format info
Randy Dunlap [Mon, 28 Jul 2008 03:44:24 +0000]
SubmittingPatches: add git pull & diffstat format info

Add git pull command info and diffstat summary info so that we don't
have to search email archives for it repeatedly.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agomore sysdev API change fallout - drivers/base/memory.c
Stephen Rothwell [Mon, 28 Jul 2008 01:05:04 +0000]
more sysdev API change fallout - drivers/base/memory.c

Noticed because of this warning:

  drivers/base/memory.c:279: warning: initialization from incompatible pointer type

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoACPI/CPUIDLE: prevent setting pm_idle to NULL
Thomas Gleixner [Sun, 27 Jul 2008 21:47:12 +0000]
ACPI/CPUIDLE: prevent setting pm_idle to NULL

pm_idle_save resp. pm_idle_old can be NULL when the restore code in
acpi_processor_cst_has_changed() resp. cpuidle_uninstall_idle_handler()
is called. This can set pm_idle unconditinally to NULL, which causes the
kernel to panic when calling pm_idle in the x86 idle code. This was
covered by an extra check for !pm_idle in the x86 idle code, which was
removed during the x86 idle code refactoring.

Instead of restoring the pm_idle check in the x86 code prevent the
acpi/cpuidle code to set pm_idle to NULL.

Reported by: Dhaval Giani http://lkml.org/lkml/2008/7/2/309
Based on a debug patch from Ingo Molnar

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoMerge branch 'i2c-for-linus' of git://aeryn.fluff.org.uk/bjdooks/linux
Linus Torvalds [Mon, 28 Jul 2008 15:28:50 +0000]
Merge branch 'i2c-for-linus' of git://aeryn.fluff.org.uk/bjdooks/linux

* 'i2c-for-linus' of git://aeryn.fluff.org.uk/bjdooks/linux:
  i2c: Blackfin I2C Driver: Functional power management support
  i2c: Documentation: upgrading clients HOWTO
  i2c: S3C24XX I2C frequency scaling support.
  i2c: i2c_gpio: keep probe resident for hotplugged devices.
  i2c: S3C2410: Pass the I2C bus number via drivers platform data

11 years agoipwireless: Preallocate received packet buffers with MRU size
David Sterba [Mon, 28 Jul 2008 14:53:32 +0000]
ipwireless: Preallocate received packet buffers with MRU size

ipwireless: Preallocate received packet buffers with MRU size

Packets are assembled from link size (~300 bytes) up to PPP MRU
(1500 by default). Try to preallocate full size rather than
repeatedly advance buffer size by 256 bytes.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Put packets to pool start
David Sterba [Mon, 28 Jul 2008 14:53:27 +0000]
ipwireless: Put packets to pool start

ipwireless: Put packets to pool start

Put packets to pool start, try to reuse cached memory.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Increase PPP outgoing queue size
David Sterba [Mon, 28 Jul 2008 14:53:21 +0000]
ipwireless: Increase PPP outgoing queue size

ipwireless: Increase PPP outgoing queue size

Increase default size of PPP outgoing queue. Currently set to 1, which
means that a packet quickly following another pushed by PPP must wait
until hardware actually sends the previous and PPP has to be waken up
by ppp_wakeup(). This slows down upstream.

Now PPP can push more packets at once which get buffered inside driver
and pushed immediatelly to hardware when previous packet is out.

Experiments show that size = 10 is quite good for all connection types
(GPRS/EDGE/UMTS) and gains 4 KB/sec of upload for UMTS for batch uploads.
Need for higher queue size than 10 occures in only < 0.1 % of cases.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Explicitly request io and mem regions
David Sterba [Mon, 28 Jul 2008 14:53:16 +0000]
ipwireless: Explicitly request io and mem regions

ipwireless: Explicitly request io and mem regions

Documentation/pcmcia/driver-changes.txt says, that driver should call request_region
for used memory/io regions since PCMCIA does not do this (since 2.6.8).

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Constify buffer variables
David Sterba [Mon, 28 Jul 2008 14:53:11 +0000]
ipwireless: Constify buffer variables

ipwireless: Constify buffer variables

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Do not return value from sending funcs
David Sterba [Mon, 28 Jul 2008 14:53:05 +0000]
ipwireless: Do not return value from sending funcs

ipwireless: Do not return value from sending funcs

Do not return value from do_send_fragment and do_send_packet, it's not used.
The packet size checks are not useful too:

* zero length packet will never be sent, caller always passes packet_header
  size which is either 1 or 3
* MTU check is done in caller, no need to repeat

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Remove endian-dependent bitfields
David Sterba [Mon, 28 Jul 2008 14:53:00 +0000]
ipwireless: Remove endian-dependent bitfields

ipwireless: Remove endian-dependent bitfields

Remove endian-dependent bitfields and use bitmasks to transform
packet header bitfields from/to machine order.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Glue splitted printk strings back
David Sterba [Mon, 28 Jul 2008 14:52:55 +0000]
ipwireless: Glue splitted printk strings back

ipwireless: Glue splitted printk strings back

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Remove pt_regs from interrupt handler
David Sterba [Mon, 28 Jul 2008 14:52:49 +0000]
ipwireless: Remove pt_regs from interrupt handler

ipwireless: Remove pt_regs from interrupt handler

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Rename spinlock variables to lock
David Sterba [Mon, 28 Jul 2008 14:52:44 +0000]
ipwireless: Rename spinlock variables to lock

ipwireless: Rename spinlock variables to lock

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Remove unused defines
David Sterba [Mon, 28 Jul 2008 14:52:39 +0000]
ipwireless: Remove unused defines

ipwireless: Remove unused defines

Remove unused defines, defines hiding variables, defines hiding 0.

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years agoipwireless: Misc cleanups
David Sterba [Mon, 28 Jul 2008 14:52:33 +0000]
ipwireless: Misc cleanups

ipwireless: Misc cleanups

- remove likely() and some extra () in ifs
- use unsigned in for loops
- remove useless typecasts
- remove obvious comments
- add () around ?:

Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

11 years ago[SCSI] qla2xxx: fix msleep compile error
FUJITA Tomonori [Mon, 28 Jul 2008 02:59:20 +0000]
[SCSI] qla2xxx: fix msleep compile error

drivers/scsi/qla2xxx/qla_attr.c: In function 'qla24xx_vport_delete':
drivers/scsi/qla2xxx/qla_attr.c:1184: error: implicit declaration of function 'msleep'
make[3]: *** [drivers/scsi/qla2xxx/qla_attr.o] Error 1
make[3]: *** Waiting for unfinished jobs....

Reported-by: David Miller <davem@davemloft.net>
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

11 years agoi2c: Blackfin I2C Driver: Functional power management support
Michael Hennerich [Sun, 27 Jul 2008 06:41:54 +0000]
i2c: Blackfin I2C Driver: Functional power management support

PM_SUSPEND_MEM: Blackfin does not maintain register state through
Hibernate. Save and restore peripheral base initialization during
PM transitions.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

11 years agoi2c: Documentation: upgrading clients HOWTO
Ben Dooks [Mon, 28 Jul 2008 11:04:08 +0000]
i2c: Documentation: upgrading clients HOWTO

Add a document describing how i2c clients on Linux 2.6 can be
moved from the old to the new driver model.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

11 years agoi2c: S3C24XX I2C frequency scaling support.
Ben Dooks [Mon, 28 Jul 2008 11:04:07 +0000]
i2c: S3C24XX I2C frequency scaling support.

Add support for CPU frequency scaling to the S3C24XX I2C driver.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

11 years agoi2c: i2c_gpio: keep probe resident for hotplugged devices.
Ben Dooks [Mon, 28 Jul 2008 11:04:09 +0000]
i2c: i2c_gpio: keep probe resident for hotplugged devices.

Change the i2c_gpio driver to use platform_driver_register()
instead of platform_driver_probe() to ensure that is can
attach to any devices that may be loaded after it has initialised.

Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>

11 years agoi2c: S3C2410: Pass the I2C bus number via drivers platform data
Ben Dooks [Mon, 28 Jul 2008 11:04:06 +0000]
i2c: S3C2410: Pass the I2C bus number via drivers platform data

Allow the platform data to specify the bus bumber that the
new I2C bus will be given. This is to allow the use of the
board registration mechanism to specify the new style of
I2C device registration which allows boards to provide a
list of attached devices.

Note, as discussed on the mailing list, we have dropped
backwards compatibility of adding an dynamic bus number
as it should not affect most boards to have the bus pinned
to 0 if they have either not specified platform data for
driver. Any board supplying platform data will automatically
have the bus_num field set to 0, and anyone who needs the
driver on a different bus number can supply platform data
to set bus_num.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>

11 years agoRemove deprecated virt_to_bus()
Karsten Keil [Mon, 28 Jul 2008 10:21:25 +0000]
Remove deprecated virt_to_bus()

Please pull from git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/ISDN-2.6.git master

This was a forgotten item in a printk from the old driver,
the DMA allocation use already the new interface.

Signed-off-by: Karsten Keil <kkeil@suse.de>

11 years agosh: SuperH Mobile CEU and camera platform data for AP325RXA
Magnus Damm [Mon, 28 Jul 2008 10:14:35 +0000]
sh: SuperH Mobile CEU and camera platform data for AP325RXA

Add AP325RXA specific platform data for on-chip sh7723 CEU and ncm03j camera.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>