10 years agoMerge branch 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Wed, 4 Aug 2010 17:43:01 +0000]
Merge branch 'kvm-updates/2.6.36' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (198 commits)
  KVM: VMX: Fix host GDT.LIMIT corruption
  KVM: MMU: using __xchg_spte more smarter
  KVM: MMU: cleanup spte set and accssed/dirty tracking
  KVM: MMU: don't atomicly set spte if it's not present
  KVM: MMU: fix page dirty tracking lost while sync page
  KVM: MMU: fix broken page accessed tracking with ept enabled
  KVM: MMU: add missing reserved bits check in speculative path
  KVM: MMU: fix mmu notifier invalidate handler for huge spte
  KVM: x86 emulator: fix xchg instruction emulation
  KVM: x86: Call mask notifiers from pic
  KVM: x86: never re-execute instruction with enabled tdp
  KVM: Document KVM_GET_SUPPORTED_CPUID2 ioctl
  KVM: x86: emulator: inc/dec can have lock prefix
  KVM: MMU: Eliminate redundant temporaries in FNAME(fetch)
  KVM: MMU: Validate all gptes during fetch, not just those used for new pages
  KVM: MMU: Simplify spte fetch() function
  KVM: MMU: Add gpte_valid() helper
  KVM: MMU: Add validate_direct_spte() helper
  KVM: MMU: Add drop_large_spte() helper
  KVM: MMU: Use __set_spte to link shadow pages
  ...

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Wed, 4 Aug 2010 17:41:52 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
  Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()
  Input: cy8ctmg110 - capacitive touchscreen support
  Input: keyboard - also match braille-only keyboards
  Input: adp5588-keys - export unused GPIO pins
  Input: xpad - add product ID for Hori Fighting Stick EX2
  Input: adxl34x - fix leak and use after free
  Input: samsung-keypad - Add samsung keypad driver
  Input: i8042 - reset keyboard controller wehen resuming from S2R
  Input: synaptics - set min/max for finger width
  Input: synaptics - only report width on hardware that supports it
  Input: evdev - signal that device is writable in evdev_poll()
  Input: mousedev - signal that device is writable in mousedev_poll()
  Input: change input handlers to use bool when possible
  Input: document the MT event slot protocol
  Input: introduce MT event slots
  Input: usbtouchscreen - implement reset_resume
  Input: usbtouchscreen - implement runtime power management
  Input: usbtouchscreen - implement basic suspend/resume
  Input: Add ATMEL QT602240 touchscreen driver
  Input: fix signedness warning in input_set_keycode()
  ...

10 years agoMerge branch 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mcheha...
Linus Torvalds [Wed, 4 Aug 2010 17:38:08 +0000]
Merge branch 'v4l_for_2.6.35' of git://git./linux/kernel/git/mchehab/linux-2.6

* 'v4l_for_2.6.35' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (243 commits)
  V4L/DVB: sms: Convert IR support to use the Remote Controller core
  V4L/DVB: sms: properly initialize IR phys and IR name
  V4L/DVB: standardize names at rc-dib0700 tables
  V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick
  V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5
  V4L/DVB: dib0700: properly implement IR change_protocol
  V4L/DVB: dib0700: break keytable into NEC and RC-5 variants
  V4L/DVB: dib0700: avoid bad repeat
  V4L/DVB: Port dib0700 to rc-core
  V4L/DVB: Add a keymap file with dib0700 table
  V4L/DVB: dvb-usb: add support for rc-core mode
  V4L/DVB: dvb-usb: prepare drivers for using rc-core
  V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key
  V4L/DVB: rj54n1cb0c: fix a comment in the driver
  V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too
  V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2
  V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms
  V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications
  V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats
  V4L/DVB: mediabus: fix ambiguous pixel code names
  ...

10 years agoMerge branch 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Wed, 4 Aug 2010 17:36:39 +0000]
Merge branch 'stable/swiotlb-0.8.3' of git://git./linux/kernel/git/konrad/swiotlb-2.6

* 'stable/swiotlb-0.8.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb-2.6:
  swiotlb: Make swiotlb bookkeeping functions visible in the header file.
  swiotlb: search and replace "int dir" with "enum dma_data_direction dir"
  swiotlb: Make internal bookkeeping functions have 'swiotlb_tbl' prefix.
  swiotlb: add the swiotlb initialization function with iotlb memory
  swiotlb: add swiotlb_tbl_map_single library function

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris...
Linus Torvalds [Wed, 4 Aug 2010 17:28:39 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: (90 commits)
  AppArmor: fix build warnings for non-const use of get_task_cred
  selinux: convert the policy type_attr_map to flex_array
  AppArmor: Enable configuring and building of the AppArmor security module
  TOMOYO: Use pathname specified by policy rather than execve()
  AppArmor: update path_truncate method to latest version
  AppArmor: core policy routines
  AppArmor: policy routines for loading and unpacking policy
  AppArmor: mediation of non file objects
  AppArmor: LSM interface, and security module initialization
  AppArmor: Enable configuring and building of the AppArmor security module
  AppArmor: update Maintainer and Documentation
  AppArmor: functions for domain transitions
  AppArmor: file enforcement routines
  AppArmor: userspace interfaces
  AppArmor: dfa match engine
  AppArmor: contexts used in attaching policy to system objects
  AppArmor: basic auditing infrastructure.
  AppArmor: misc. base functions and defines
  TOMOYO: Update version to 2.3.0
  TOMOYO: Fix quota check.
  ...

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw
Linus Torvalds [Tue, 3 Aug 2010 21:40:10 +0000]
Merge git://git./linux/kernel/git/steve/gfs2-2.6-nmw

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-nmw:
  GFS2: Fix recovery stuck bug (try #2)
  GFS2: Fix typo in stuffed file data copy handling
  Revert "GFS2: recovery stuck on transaction lock"
  GFS2: Make "try" lock not try quite so hard
  GFS2: remove dependency on __GFP_NOFAIL
  GFS2: Simplify gfs2_write_alloc_required
  GFS2: Wait for journal id on mount if not specified on mount command line
  GFS2: Use nobh_writepage

10 years agoMerge branch 'linux-next' of git://git.infradead.org/ubi-2.6
Linus Torvalds [Tue, 3 Aug 2010 21:37:26 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6

* 'linux-next' of git://git.infradead.org/ubi-2.6:
  UBI: do not warn unnecessarily
  UBI: do not print message about corruptes PEBs if we have none of them
  UBI: improve delete-compatible volumes handling
  UBI: fix error message and compilation warnings
  UBI: generate random image_seq when formatting MTD devices
  UBI: improve ECC error message
  UBI: improve corrupted flash handling
  UBI: introduce eraseblock counter variables
  UBI: introduce a new IO return code
  UBI: simplify IO error codes

10 years agoMerge branch 'linux-next' of git://git.infradead.org/ubifs-2.6
Linus Torvalds [Tue, 3 Aug 2010 21:37:02 +0000]
Merge branch 'linux-next' of git://git.infradead.org/ubifs-2.6

* 'linux-next' of git://git.infradead.org/ubifs-2.6:
  UBIFS: fix a memory leak on error path.
  UBIFS: fix GC LEB recovery
  UBIFS: use ERR_CAST
  UBIFS: check return code

10 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh...
Linus Torvalds [Tue, 3 Aug 2010 21:36:16 +0000]
Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: (22 commits)
  9p: fix sparse warnings in new xattr code
  fs/9p: remove sparse warning in vfs_inode
  fs/9p: destroy fid on failed remove
  fs/9p: Prevent parallel rename when doing fid_lookup
  fs/9p: Add support user. xattr
  net/9p: Implement TXATTRCREATE 9p call
  net/9p: Implement attrwalk 9p call
  9p: Implement LOPEN
  fs/9p: This patch implements TLCREATE for 9p2000.L protocol.
  9p: Implement TMKDIR
  9p: Implement TMKNOD
  9p: Define and implement TSYMLINK for 9P2000.L
  9p: Define and implement TLINK for 9P2000.L
  9p: Define and implement TLINK for 9P2000.L
  9p: Implement client side of setattr for 9P2000.L protocol.
  9p: getattr client implementation for 9P2000.L protocol.
  fs/9p: Pass the correct user credentials during attach
  net/9p: Handle the server returned error properly
  9p: readdir implementation for 9p2000.L
  9p: Make use of iounit for read/write
  ...

10 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Tue, 3 Aug 2010 21:33:38 +0000]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs: (49 commits)
  xfs simplify and speed up direct I/O completions
  xfs: move aio completion after unwritten extent conversion
  direct-io: move aio_complete into ->end_io
  xfs: fix big endian build
  xfs: clean up xfs_bmap_get_bp
  xfs: simplify xfs_truncate_file
  xfs: kill the b_strat callback in xfs_buf
  xfs: remove obsolete osyncisosync mount option
  xfs: clean up filestreams helpers
  xfs: fix gcc 4.6 set but not read and unused statement warnings
  xfs: Fix build when CONFIG_XFS_POSIX_ACL=n
  xfs: fix unsigned underflow in xfs_free_eofblocks
  xfs: use GFP_NOFS for page cache allocation
  xfs: fix memory reclaim recursion deadlock on locked inode buffer
  xfs: fix xfs_trans_add_item() lockdep warnings
  xfs: simplify and remove xfs_ireclaim
  xfs: don't block on buffer read errors
  xfs: move inode shrinker unregister even earlier
  xfs: remove a dmapi leftover
  xfs: writepage always has buffers
  ...

10 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Tue, 3 Aug 2010 21:33:09 +0000]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: (29 commits)
  cifs: fsc should not default to "on"
  [CIFS] remove redundant path walking in dfs_do_refmount
  cifs: ignore the "mand", "nomand" and "_netdev" mount options
  cifs: map NT_STATUS_ERROR_WRITE_PROTECTED to -EROFS
  cifs: don't allow cifs_iget to match inodes of the wrong type
  [CIFS] relinquish fscache cookie before freeing CIFSTconInfo
  cifs: add separate cred_uid field to sesInfo
  fs: cifs: check kmalloc() result
  [CIFS] Missing ifdef
  [CIFS] Missing line from previous commit
  [CIFS] Fix build break when CONFIG_CIFS_FSCACHE disabled
  cifs: add mount option to enable local caching
  cifs: read pages from FS-Cache
  cifs: store pages into local cache
  cifs: FS-Cache page management
  cifs: define inode-level cache object and register them
  cifs: define superblock-level cache index objects and register them
  cifs: remove unused cifsUidInfo struct
  cifs: clean up cifs_find_smb_ses (try #2)
  cifs: match secType when searching for existing tcp session
  ...

10 years agoMerge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Tue, 3 Aug 2010 21:31:24 +0000]
Merge branch 'devel' of /home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (291 commits)
  ARM: AMBA: Add pclk support to AMBA bus infrastructure
  ARM: 6278/2: fix regression in RealView after the introduction of pclk
  ARM: 6277/1: mach-shmobile: Allow users to select HZ, default to 128
  ARM: 6276/1: mach-shmobile: remove duplicate NR_IRQS_LEGACY
  ARM: 6246/1: mmci: support larger MMCIDATALENGTH register
  ARM: 6245/1: mmci: enable hardware flow control on Ux500 variants
  ARM: 6244/1: mmci: add variant data and default MCICLOCK support
  ARM: 6243/1: mmci: pass power_mode to the translate_vdd callback
  ARM: 6274/1: add global control registers definition header file for nuc900
  mx2_camera: fix type of dma buffer virtual address pointer
  mx2_camera: Add soc_camera support for i.MX25/i.MX27
  arm/imx/gpio: add spinlock protection
  ARM: Add support for the LPC32XX arch
  ARM: LPC32XX: Arch config menu supoport and makefiles
  ARM: LPC32XX: Phytec 3250 platform support
  ARM: LPC32XX: Misc support functions
  ARM: LPC32XX: Serial support code
  ARM: LPC32XX: System suspend support
  ARM: LPC32XX: GPIO, timer, and IRQ drivers
  ARM: LPC32XX: Clock driver
  ...

10 years agoPARISC: led.c - fix potential stack overflow in led_proc_write()
Helge Deller [Mon, 2 Aug 2010 20:46:41 +0000]
PARISC: led.c - fix potential stack overflow in led_proc_write()

avoid potential stack overflow by correctly checking count parameter

Reported-by: Ilja <ilja@netric.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: Kyle McMartin <kyle@mcmartin.ca>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

10 years agoUBIFS: fix a memory leak on error path.
Matthieu CASTET [Mon, 2 Aug 2010 09:36:06 +0000]
UBIFS: fix a memory leak on error path.

In 'mount_ubifs()', in case of 'ubifs_leb_unmap()' falure,
free allocated resources.

Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

10 years agoMerge branch 'next' into for-linus
Dmitry Torokhov [Tue, 3 Aug 2010 01:35:17 +0000]
Merge branch 'next' into for-linus

10 years agoInput: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()
Dmitry Torokhov [Tue, 3 Aug 2010 01:33:26 +0000]
Input: adp5588-keypad - fix NULL dereference in adp5588_gpio_add()

The kpad structure is assigned to i2c client via i2s_set_clientdata()
at the end of adp5588_probe(), but in adp5588_gpio_add() we tried to
access it (via dev_get_drvdata! which is not nice at all) causing an
oops.

Let's pass pointer to kpad directly into adp5588_gpio_add() and
adp5588_gpio_remove() to avoid accessing driver data before it is
set up.

Also split out building of gpiomap into a separate function to
clear the logic.

Reported-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>

10 years agoV4L/DVB: sms: Convert IR support to use the Remote Controller core
Mauro Carvalho Chehab [Sun, 1 Aug 2010 20:19:29 +0000]
V4L/DVB: sms: Convert IR support to use the Remote Controller core

Rewrites the siano IR implementation. The previous implementation were
non-standard. As such, it has issues if more than one device registers IR,
as there used to have some static constants used during protocol decoding
phase. Also, it used to implement its on RAW decoder, and only for RC5.

The new code uses RC core subsystem for handling IR. This brings several
new features to the driver, including:
- Allow to dynamically replace the IR keycodes;
- Supports all existing raw decoders (JVC, NEC, RC-5, RC-6, SONY);
- Supports lirc dev;
- Doesn't have race conditions when more than one sms IR is
  registered;
- The code size for the IR implementation is very small;
- it exports the IR features via /sys/class/rc.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: sms: properly initialize IR phys and IR name
Mauro Carvalho Chehab [Sun, 1 Aug 2010 18:30:50 +0000]
V4L/DVB: sms: properly initialize IR phys and IR name

sms were using a non-compliant nomenclature for the USB devices. Fix it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: standardize names at rc-dib0700 tables
Mauro Carvalho Chehab [Sun, 1 Aug 2010 16:48:20 +0000]
V4L/DVB: standardize names at rc-dib0700 tables

Use a more standard way to name those tables, as they're currently used
by the script that coverts those tables to be loaded via userspace.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick
Mauro Carvalho Chehab [Sun, 1 Aug 2010 16:01:40 +0000]
V4L/DVB: smsusb: enable IR port for Hauppauge WinTV MiniStick

Add the proper gpio port for WinTV MiniStick, with the information provided
by Michael.

Thanks-to: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5
Mauro Carvalho Chehab [Sun, 1 Aug 2010 13:35:49 +0000]
V4L/DVB: dib0700: Fix RC protocol logic to properly handle NEC/NECx and RC-5

Simplifies the logic for handling firmware 1.20 RC messages, fixing the
logic.

While here, I tried to use a RC-6 remote controller from my TV set, but it
didn't work with dib0700. Not sure why, but maybe this never worked.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: dib0700: properly implement IR change_protocol
Mauro Carvalho Chehab [Sun, 1 Aug 2010 12:37:23 +0000]
V4L/DVB: dib0700: properly implement IR change_protocol

This patch implements change_protocol callback. With this change,
there's no need for an extra modprobe parameter to specify the
protocol. When a table is loaded (either from in-kernel rc-map
tables or via ir-keytable program), the driver will automatically
change the protocol, in order to work with the given table.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: dib0700: break keytable into NEC and RC-5 variants
Mauro Carvalho Chehab [Sun, 1 Aug 2010 11:02:35 +0000]
V4L/DVB: dib0700: break keytable into NEC and RC-5 variants

Instead of having one big keytable with 2 protocols inside, break it
into two separate tables, being one for NEC and another for RC-5 variants,
and properly identify what variant should be used at the boards entries.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: dib0700: avoid bad repeat
Mauro Carvalho Chehab [Sun, 1 Aug 2010 02:37:19 +0000]
V4L/DVB: dib0700: avoid bad repeat

a 250ms delay is too low for this device. It ends by producing false
repeat events. Increase the delay time to 500 ms to avoid troubles.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: Port dib0700 to rc-core
Mauro Carvalho Chehab [Sun, 1 Aug 2010 01:56:00 +0000]
V4L/DVB: Port dib0700 to rc-core

Use the new rc-core handler at dvb-usb-remote for dib0700 driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: Add a keymap file with dib0700 table
Mauro Carvalho Chehab [Sat, 31 Jul 2010 22:24:49 +0000]
V4L/DVB: Add a keymap file with dib0700 table

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: dvb-usb: add support for rc-core mode
Mauro Carvalho Chehab [Sat, 31 Jul 2010 22:07:55 +0000]
V4L/DVB: dvb-usb: add support for rc-core mode

Allows dvb-usb drivers to use rc-core, instead of the legacy
implementation.

No driver were ported yet to rc-core, so, some small adjustments
may be needed, when starting to migrate the drivers.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: dvb-usb: prepare drivers for using rc-core
Mauro Carvalho Chehab [Sat, 31 Jul 2010 21:04:09 +0000]
V4L/DVB: dvb-usb: prepare drivers for using rc-core

This is a big patch, yet trivial. It just move the RC properties
to a separate struct, in order to prepare the dvb-usb drivers to
use rc-core. There's no change on the behavior of the drivers.

With this change, it is possible to have both legacy and rc-core
based code inside the dvb-usb-remote, allowing a gradual migration
to rc-core, driver per driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key
Mauro Carvalho Chehab [Sat, 31 Jul 2010 14:24:57 +0000]
V4L/DVB: dvb-usb: get rid of struct dvb_usb_rc_key

dvb-usb has its own IR handle code. Now that we have a Remote
Controller subsystem, we should start using it. So, remove this
struct, in favor of the similar struct defined at the RC subsystem.

This is a big, but trivial patch. It is a 3 line delect, plus
lots of rename on several dvb-usb files.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: rj54n1cb0c: fix a comment in the driver
Guennadi Liakhovetski [Tue, 20 Jul 2010 13:08:56 +0000]
V4L/DVB: rj54n1cb0c: fix a comment in the driver

RJ54N1CB0C is a Sharp camera sensor.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too
Guennadi Liakhovetski [Thu, 29 Jul 2010 07:11:42 +0000]
V4L/DVB: V4L2: sh_vou: VOU does support the full PAL resolution too

SH7724 datasheet specifies 480 pixels as the VOU maximum vertical resolution.
This is a bug in the datasheet, VOU also supports the full PAL resolution: 576
lines. Adjust the driver accordingly.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2
Guennadi Liakhovetski [Mon, 26 Jul 2010 15:13:34 +0000]
V4L/DVB: V4L2: sh_mobile_camera_ceu: add support for CSI2

Using CEU with CSI2 on SH-Mobile requires some special configuration of the
former. We also have to switch from calling only one subdev .s_mbus_fmt and
.try_mbus_fmt to calling all subdevices. Take care to increment CSI2 driver
use count to prevent it from unloading, while in use.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms
Guennadi Liakhovetski [Mon, 26 Jul 2010 14:12:43 +0000]
V4L/DVB: V4L2: soc-camera: add a MIPI CSI-2 driver for SH-Mobile platforms

Some SH-Mobile SoCs implement a MIPI CSI-2 controller, that can interface to
several video clients and send data to the CEU or to the Image Signal
Processor.  This patch implements a v4l2-subdevice driver for CSI-2 to be used
within the soc-camera framework, implementing the second subdevice in addition
to the actual video clients.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications
Guennadi Liakhovetski [Mon, 26 Jul 2010 14:37:13 +0000]
V4L/DVB: V4L2: soc-camera: export soc-camera bus type for notifications

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats
Guennadi Liakhovetski [Mon, 26 Jul 2010 13:41:55 +0000]
V4L/DVB: V4L2: mediabus: add 12-bit Bayer and YUV420 pixel formats

These formats belong to the standard format set, defined by the MIPI CSI-2
specification.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: mediabus: fix ambiguous pixel code names
Guennadi Liakhovetski [Thu, 22 Jul 2010 19:52:51 +0000]
V4L/DVB: mediabus: fix ambiguous pixel code names

Endianness notation is meaningless for 8 bit YUYV codes. Switch pixel code
names to explicitly state the order of colour components in the data
stream.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: CodingStyle cleanups
Mauro Carvalho Chehab [Tue, 27 Jul 2010 21:44:45 +0000]
V4L/DVB: staging/lirc: CodingStyle cleanups

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: wire up Kconfig and Makefile bits
Jarod Wilson [Mon, 26 Jul 2010 23:34:23 +0000]
V4L/DVB: staging/lirc: wire up Kconfig and Makefile bits

Make the bits under staging/lirc/ buildable, and add a TODO note.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_zilog driver
Jarod Wilson [Mon, 26 Jul 2010 23:34:04 +0000]
V4L/DVB: staging/lirc: add lirc_zilog driver

Commonly found on several Hauppauge video capture devices.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_ttusbir driver
Jarod Wilson [Mon, 26 Jul 2010 23:33:09 +0000]
V4L/DVB: staging/lirc: add lirc_ttusbir driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_streamzap driver
Jarod Wilson [Mon, 26 Jul 2010 23:32:49 +0000]
V4L/DVB: staging/lirc: add lirc_streamzap driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_sir driver
Jarod Wilson [Mon, 26 Jul 2010 23:32:03 +0000]
V4L/DVB: staging/lirc: add lirc_sir driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_serial driver
Jarod Wilson [Mon, 26 Jul 2010 23:31:45 +0000]
V4L/DVB: staging/lirc: add lirc_serial driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_sasem driver
Jarod Wilson [Mon, 26 Jul 2010 23:31:11 +0000]
V4L/DVB: staging/lirc: add lirc_sasem driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_parallel driver
Jarod Wilson [Mon, 26 Jul 2010 23:30:51 +0000]
V4L/DVB: staging/lirc: add lirc_parallel driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_it87 driver
Jarod Wilson [Mon, 26 Jul 2010 23:30:02 +0000]
V4L/DVB: staging/lirc: add lirc_it87 driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_ite8709 driver
Jarod Wilson [Mon, 26 Jul 2010 23:30:25 +0000]
V4L/DVB: staging/lirc: add lirc_ite8709 driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_imon driver
Jarod Wilson [Mon, 26 Jul 2010 23:29:43 +0000]
V4L/DVB: staging/lirc: add lirc_imon driver

Nb: this is a very trimmed-down lirc_imon, which only supports the
oldest generation of imon devices that don't do onboard signal decoding
like the most recent generation imon devices -- those are now supported
by the ir-core imon driver.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_igorplugusb driver
Jarod Wilson [Mon, 26 Jul 2010 23:29:00 +0000]
V4L/DVB: staging/lirc: add lirc_igorplugusb driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging: Add an specific TODO note for lirc_i2c
Mauro Carvalho Chehab [Tue, 27 Jul 2010 20:56:24 +0000]
V4L/DVB: staging: Add an specific TODO note for lirc_i2c

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_i2c driver
Jarod Wilson [Mon, 26 Jul 2010 23:28:37 +0000]
V4L/DVB: staging/lirc: add lirc_i2c driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_ene0100 driver
Jarod Wilson [Mon, 26 Jul 2010 23:27:55 +0000]
V4L/DVB: staging/lirc: add lirc_ene0100 driver

[mchehab@redhat.com: fixed a few WARNING: please, no space before tabs]
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: staging/lirc: add lirc_bt829 driver
Jarod Wilson [Mon, 26 Jul 2010 23:26:53 +0000]
V4L/DVB: staging/lirc: add lirc_bt829 driver

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: af9005: use generic_bulk_ctrl_endpoint_response
Michael Krufky [Mon, 21 Jun 2010 04:49:42 +0000]
V4L/DVB: af9005: use generic_bulk_ctrl_endpoint_response

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Acked-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: dvb: add support for kworld 340u and ub435-q to em28xx-dvb
Jarod Wilson [Sun, 7 Mar 2010 20:55:43 +0000]
V4L/DVB: dvb: add support for kworld 340u and ub435-q to em28xx-dvb

This adds support for the KWorld PlusTV 340U and KWorld UB345-Q ATSC
sticks, which are really the same device. The sticks have an eMPIA
em2870 usb bridge chipset, an LG Electronics LGDT3304 ATSC/QAM
demodulator and an NXP TDA18271HD tuner -- early versions of the 340U
have a a TDA18271HD/C1, later models and the UB435-Q have a C2.

The stick has been tested succesfully with both VSB_8 and QAM_256 signals.
Its using lgdt3304 support added to the lgdt3305 driver by a prior patch,
rather than the current lgdt3304 driver, as its severely lacking in
functionality by comparison (see said patch for details).

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: DVB: fix dvr node refcounting
Jiri Slaby [Sun, 18 Jul 2010 18:34:18 +0000]
V4L/DVB: DVB: fix dvr node refcounting

In dvb_dvr_release, there is a test dvbdev->users==-1, but users are
never negative. This error results in hung tasks:
  task                        PC stack   pid father
bash          D ffffffffa000c948     0  3264   3170 0x00000000
 ffff88003aec5ce8 0000000000000086 0000000000011f80 0000000000011f80
 ffff88003aec5fd8 ffff88003aec5fd8 ffff88003b848670 0000000000011f80
 ffff88003aec5fd8 0000000000011f80 ffff88003e02a030 ffff88003b848670
Call Trace:
 [<ffffffff813dd4a5>] dvb_dmxdev_release+0xc5/0x130
 [<ffffffff8107b750>] ? autoremove_wake_function+0x0/0x40
 [<ffffffffa00013a2>] dvb_usb_adapter_dvb_exit+0x42/0x70 [dvb_usb]
 [<ffffffffa0000525>] dvb_usb_exit+0x55/0xd0 [dvb_usb]
 [<ffffffffa00005ee>] dvb_usb_device_exit+0x4e/0x70 [dvb_usb]
 [<ffffffffa000a065>] af9015_usb_device_exit+0x55/0x60 [dvb_usb_af9015]
 [<ffffffff813a3f05>] usb_unbind_interface+0x55/0x1a0
 [<ffffffff81316000>] __device_release_driver+0x70/0xe0
...

So check against 1 there instead.

BTW why's the TODO there? Adding TODOs to the code without
descriptions is like adding nothing.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: uvc: Move constants and structures definitions to linux/usb/video.h
Laurent Pinchart [Sat, 10 Jul 2010 18:03:20 +0000]
V4L/DVB: uvc: Move constants and structures definitions to linux/usb/video.h

The UVC host and gadget drivers both define constants and structures in
private header files. Move all those definitions to linux/usb/video.h
where they can be shared by the two drivers (and be available for
userspace applications).

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: af9013: fix comments
Antti Palosaari [Fri, 18 Jun 2010 00:19:13 +0000]
V4L/DVB: af9013: fix comments

Fix comments. It is demodulator driver not DVB USB -bridge.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: af9013: output fw version as four digit long
Antti Palosaari [Fri, 18 Jun 2010 00:16:12 +0000]
V4L/DVB: af9013: output fw version as four digit long

Firmware version is four digit long. Print all four digits instead of
three digits used earlier.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: af9013: af9013_read_status() refactoring
Antti Palosaari [Thu, 17 Jun 2010 23:56:27 +0000]
V4L/DVB: af9013: af9013_read_status() refactoring

Function af9013_read_status() refactoring. Read lock bits in different
order to save count of register reads.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: af9013: program tuner before demodulator
Antti Palosaari [Wed, 16 Jun 2010 19:43:40 +0000]
V4L/DVB: af9013: program tuner before demodulator

Program tuner before demodulator in case of channel set. Earlier it was
programmed during demodulator programming. This seems to resolve weird
error where demodulator misses sometimes ability to gain lock.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: af9015: support for AverMedia AVerTV Volar M (A815Mac)
Antti Palosaari [Sun, 23 May 2010 21:26:37 +0000]
V4L/DVB: af9015: support for AverMedia AVerTV Volar M (A815Mac)

Add USB ID 07ca:815a for AverMedia AVerTV Volar M (A815Mac).

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: get_dvb_firmware: update af9015
Antti Palosaari [Fri, 14 May 2010 18:24:28 +0000]
V4L/DVB: get_dvb_firmware: update af9015

New driver contains new firmware 5.1.0.0. Fix script to get that.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: af9013: add support for firmware 5.1.0.0
Antti Palosaari [Fri, 14 May 2010 16:59:50 +0000]
V4L/DVB: af9013: add support for firmware 5.1.0.0

Add support for new firmware version 5.1.0.0.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - vc032x: Move the first VC0321 settings to sd_init()
Jean-François Moine [Wed, 14 Jul 2010 10:09:50 +0000]
V4L/DVB: gspca - vc032x: Move the first VC0321 settings to sd_init()

The first VC0321 settings were done at webcam connection only. They must also
be done on resume after suspend.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - sonixj: Do the audio input work for webcams with a microphone
Jean-François Moine [Wed, 14 Jul 2010 09:33:51 +0000]
V4L/DVB: gspca - sonixj: Do the audio input work for webcams with a microphone

The bit 0x04 of the bridge register 02 (GPIO) is used for audio connection
in webcams containing the bridge SN9C105. This patch sets it correctly,
according to the presence of an audio device.

Tested-by: Kyle Baker <kyleabaker@gmail.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - main: Handle the audio device
Jean-François Moine [Wed, 14 Jul 2010 09:30:18 +0000]
V4L/DVB: gspca - main: Handle the audio device

When there is an audio device, use a lower alternate setting.
This patch does not fix correctly all audio and bandwidth problems.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - main: Adjust and remove some debug messages
Jean-François Moine [Wed, 14 Jul 2010 09:26:54 +0000]
V4L/DVB: gspca - main: Adjust and remove some debug messages

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - main: Remove useless audio ioctl's
Jean-François Moine [Wed, 14 Jul 2010 09:25:16 +0000]
V4L/DVB: gspca - main: Remove useless audio ioctl's

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - main: Fix a compilation warning
Jean-François Moine [Wed, 14 Jul 2010 09:21:16 +0000]
V4L/DVB: gspca - main: Fix a compilation warning

Reported-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: au0828: move dereference below sanity checks
Dan Carpenter [Fri, 23 Jul 2010 10:09:20 +0000]
V4L/DVB: au0828: move dereference below sanity checks

This function has sanity checks to make sure that "dev" is non-null.  I
moved the dereference down below the checks.  In the current code "dev"
is never actually null.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: media/IR: testing the wrong variable
Dan Carpenter [Fri, 23 Jul 2010 10:08:26 +0000]
V4L/DVB: media/IR: testing the wrong variable

There is a typo here.  We meant to test "rbuf" instead of "drv".  We
already tested "drv" earlier.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: drivers/video/omap2/displays: add missing mutex_unlock
Julia Lawall [Tue, 20 Jul 2010 22:22:44 +0000]
V4L/DVB: drivers/video/omap2/displays: add missing mutex_unlock

Add a mutex_unlock missing on the error paths.  The use of the mutex is
balanced elsewhere in the file.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E1;
@@

* mutex_lock(E1,...);
  <+... when != E1
  if (...) {
    ... when != E1
*   return ...;
  }
  ...+>
* mutex_unlock(E1,...);
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Acked-by: Mike Isely <isely@pobox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: "dib3000mc: reduce large stack usage" fix
Andrew Morton [Tue, 20 Jul 2010 22:22:42 +0000]
V4L/DVB: "dib3000mc: reduce large stack usage" fix

s/ENODEV/ENOMEM, per Andreas.

This fix got lost when someone merged "dib3000mc: reduce large stack
usage".  Please don't lose fixes.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: VIDEO: ivtvfb, remove unneeded NULL test
Jiri Slaby [Mon, 19 Jul 2010 17:39:34 +0000]
V4L/DVB: VIDEO: ivtvfb, remove unneeded NULL test

Stanse found that in ivtvfb_callback_cleanup and ivtvfb_callback_init
there are unneeded tests for itv being NULL. But itv is initialized
as container_of with non-zero offset in those functions, so it is
never NULL (even if v4l2_dev is). This was found because itv is
dereferenced earlier than the test.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: IR/lirc: use memdup_user instead of copy_from_user
Jarod Wilson [Fri, 16 Jul 2010 21:29:54 +0000]
V4L/DVB: IR/lirc: use memdup_user instead of copy_from_user

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: IR/lirc: make lirc userspace and staging modules buildable
Jarod Wilson [Fri, 16 Jul 2010 17:25:33 +0000]
V4L/DVB: IR/lirc: make lirc userspace and staging modules buildable

The lirc userspace needs all the current ioctls defined, and we need to
put the header files in places out-of-tree and/or staging lirc drivers
(which I plan to prep soon) can easily build with. I've actually tested this
in a tree w/all the lirc drivers queued up to be submitted for staging. I'm
also reasonably sure that Andy Walls is going to need most of the ioctls
anyway for his cx23888 IR driver work.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: drivers/media/video: Remove dead CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE
Christian Dietrich [Wed, 14 Jul 2010 13:21:30 +0000]
V4L/DVB: drivers/media/video: Remove dead CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE

CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE doesn't exist in Kconfig and is never defined anywhere
else, therefore removing all references for it from the source code.

Signed-off-by: Christian Dietrich <qy03fugy@stud.informatik.uni-erlangen.de>
Acked-by: Vaibhav Hiremath <hvaibhav@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: drivers/media: Remove unnecessary casts of private_data
Joe Perches [Mon, 12 Jul 2010 20:50:03 +0000]
V4L/DVB: drivers/media: Remove unnecessary casts of private_data

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - sq930x: Add some comments for sensor mt9v111
Jean-François Moine [Tue, 6 Jul 2010 08:14:57 +0000]
V4L/DVB: gspca - sq930x: Add some comments for sensor mt9v111

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - vc032x: Add trace of USB exchanges
Jean-François Moine [Tue, 6 Jul 2010 08:05:05 +0000]
V4L/DVB: gspca - vc032x: Add trace of USB exchanges

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - vc032x: Stop the USB exchanges on error
Jean-François Moine [Tue, 6 Jul 2010 08:00:07 +0000]
V4L/DVB: gspca - vc032x: Stop the USB exchanges on error

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - vc032x: Add some comments
Jean-François Moine [Tue, 6 Jul 2010 07:44:54 +0000]
V4L/DVB: gspca - vc032x: Add some comments

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - main: Don't use the frame buffer flags
Jean-François Moine [Tue, 6 Jul 2010 07:32:27 +0000]
V4L/DVB: gspca - main: Don't use the frame buffer flags

This patch fixes possible race conditions in queue management with SMP:
when a frame was completed, the irq function tried to use the next frame
buffer. At this time, it was possible that the application on an other
processor updated the frame pointer, making the image to point to a bad
buffer.
The patch contains two main changes:
- the image transfer uses the queue indexes which are protected against
  simultaneous memory access,
- the image pointer which is used for image concatenation is only set at
  interrupt level.
Some subdrivers which used the image pointer have been updated.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: gspca - main: Possible race condition in queue management
Jean-François Moine [Tue, 6 Jul 2010 07:16:40 +0000]
V4L/DVB: gspca - main: Possible race condition in queue management

The problem may occur with SMP:
- a frame is completed at interrupt level (in gspca_frame_add with
  packet_type == LAST_PACKET,
- just after clearing the bit V4L2_BUF_FLAG_QUEUED and before setting
  the bit V4L2_BUF_FLAG_DONE, on the other processor, the application
  tries to requeue the same frame buffer,
- then, the qbuf function succeeds because ALL_FLAGS are not set.
The fix sets and resets the two flags in one instruction.

Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: remove obsolete conditionalizing on DVB_DIBCOM_DEBUG
Christoph Egger [Fri, 15 Jan 2010 11:49:41 +0000]
V4L/DVB: remove obsolete conditionalizing on DVB_DIBCOM_DEBUG

As pointed by Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>,

The config Option DVB_DIBCOM_DEBUG was dropped while removing the dibusb
driver in favor of dvb-usb in 2005. However it remaind existant at some
places of the kernel config.

Instead of just removing the debug capability, the better is to just remove
the bad dependency, making the modprobe function always visible.

Thanks-to: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: lgs8gxx: remove firmware for lgs8g75
Ben Hutchings [Sun, 1 Nov 2009 02:14:35 +0000]
V4L/DVB: lgs8gxx: remove firmware for lgs8g75

The recently added support for lgs8g75 included some 8051 machine code
without accompanying source code.  Replace this with use of the
firmware loader.

Compile-tested only.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: si470x: -EINVAL overwritten in si470x_vidioc_s_tuner()
Tobias Lorenz [Sat, 10 Jul 2010 16:01:33 +0000]
V4L/DVB:  si470x: -EINVAL overwritten in si470x_vidioc_s_tuner()

This patch to the si470x_vidioc_s_tuner function was developed in
cooperation with Roel Kluin <roel.kluin@gmail.com>. It sets the default
retval to 0 instead of -EINVAL, identical to what is done in all other
set/get functions of v4l2_ioctl_ops. This is just as cosmetic change, as
retval is directly overwritten by the si470x_disconnect_check() anyway.

Signed-off-by: Tobias Lorenz <tobias.lorenz@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: IR/mceusb: more streamlining of device init
Jarod Wilson [Thu, 8 Jul 2010 15:38:57 +0000]
V4L/DVB: IR/mceusb: more streamlining of device init

Spent a while last night getting device initialization packet captures
under Windows for all generations of devices. There are a few places
where we were doing things differently, and few things we were doing
that we don't need to do, particularly on gen3 hardware, and I *think*
one of those things is what was locking up my pinnacle hw from time to
time -- at least, its been perfectly well behaved every time its been
plugged in since making this change.

First up, we're adding a bit more to the gen1 init routine here. Its
not absolutely necessary, the hardware works the same both with and
without it, but I'd like to be consistent w/Windows here.

Second, DEVICE_RESET is never called when initializing either of my
gen3 devices, its only called for gen1 and gen2. The bits in the gen3
init after removing that, are safe (and interesting) to run on all
hardware, so there's no more gen3-specific init done, there's instead
a generic mceusb_get_parameters() that is run for all hardware.

Third, the gen3 flag isn't needed. We only care if hardware is gen3
during probe, so I've dropped that from the device flags struct.

Successfully tested on all three generations of mceusb hardware.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: IR/mceusb: remove unused vars from gen1 init
Mauro Carvalho Chehab [Sat, 10 Jul 2010 14:19:42 +0000]
V4L/DVB: IR/mceusb: remove unused vars from gen1 init

Prior init unification/simplification patch made these unused, forgot
to remove them, so this silences:

drivers/media/IR/mceusb.c: In function ‘mceusb_gen1_init’:
drivers/media/IR/mceusb.c:769: warning: unused variable ‘partial’
drivers/media/IR/mceusb.c:768: warning: unused variable ‘i’

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years agoV4L/DVB: lirc: use unlocked_ioctl
Arnd Bergmann [Mon, 2 Aug 2010 18:43:35 +0000]
V4L/DVB: lirc: use unlocked_ioctl

New code should not rely on the big kernel lock,
so use the unlocked_ioctl file operation in lirc.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

10 years ago9p: fix sparse warnings in new xattr code
Eric Van Hensbergen [Mon, 2 Aug 2010 16:36:18 +0000]
9p: fix sparse warnings in new xattr code

fixes:

  CHECK   fs/9p/xattr.c
fs/9p/xattr.c:73:6: warning: Using plain integer as NULL pointer
fs/9p/xattr.c:135:6: warning: Using plain integer as NULL pointer

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years agofs/9p: remove sparse warning in vfs_inode
Eric Van Hensbergen [Tue, 27 Jul 2010 19:49:43 +0000]
fs/9p: remove sparse warning in vfs_inode

make v9fs_dentry_from_dir_inode static

Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years agofs/9p: destroy fid on failed remove
Aneesh Kumar K.V [Fri, 2 Jul 2010 06:51:20 +0000]
fs/9p: destroy fid on failed remove

9P spec says:
"It is correct to consider remove to be a clunk with the
side effect of removing the file if permissions allow. "

So even if remove fails we need to destroy the fid.

Without this patch an rmdir on a directory with contents leave
the new cloned directory fid fid attached to fidlist. On umount
we dump the fids on the fidlist

~# rmdir /mnt2/test4/
rmdir: failed to remove `/mnt2/test4/': Directory not empty
~# umount /mnt2/
~# dmesg
[  228.474323] Found fid 3 not clunked

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years agofs/9p: Prevent parallel rename when doing fid_lookup
Aneesh Kumar K.V [Wed, 30 Jun 2010 13:48:50 +0000]
fs/9p: Prevent parallel rename when doing fid_lookup

During fid lookup we need to make sure that the dentry->d_parent doesn't
change so that we can safely walk the parent dentries. To ensure that
we need to prevent cross directory rename during fid_lookup. Add a
per superblock rename_sem rw_semaphore to prevent parallel fid lookup and
rename.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years agofs/9p: Add support user. xattr
Aneesh Kumar K.V [Mon, 31 May 2010 07:52:56 +0000]
fs/9p: Add support user. xattr

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years agonet/9p: Implement TXATTRCREATE 9p call
Aneesh Kumar K.V [Mon, 31 May 2010 07:52:50 +0000]
net/9p: Implement TXATTRCREATE 9p call

TXATTRCREATE:  Prepare a fid for setting xattr value on a file system object.

 size[4] TXATTRCREATE tag[2] fid[4] name[s] attr_size[8] flags[4]
 size[4] RXATTRCREATE tag[2]

txattrcreate gets a fid pointing to xattr. This fid can later be
used to set the xattr value.

flag value is derived from set Linux setxattr. The manpage says
"The flags parameter can be used to refine the semantics of the operation.
XATTR_CREATE specifies a pure create, which fails if the named attribute
exists already. XATTR_REPLACE specifies a pure replace operation, which
fails if the named attribute does not already exist. By default (no flags),
the extended attribute will be created if need be, or will simply replace
the value if the attribute exists."

The actual setxattr operation happens when the fid is clunked. At that point
the written byte count and the attr_size specified in TXATTRCREATE should be
same otherwise an error will be returned.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years agonet/9p: Implement attrwalk 9p call
Aneesh Kumar K.V [Mon, 31 May 2010 07:52:45 +0000]
net/9p: Implement attrwalk 9p call

TXATTRWALK: Descend a ATTR namespace

 size[4] TXATTRWALK tag[2] fid[4] newfid[4] name[s]
 size[4] RXATTRWALK tag[2] size[8]

txattrwalk gets a fid pointing to xattr. This fid can later be
used to read the xattr value. If name is NULL the fid returned
can be used to get the list of extended attribute associated to
the file system object.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>

10 years ago9p: Implement LOPEN
M. Mohan Kumar [Tue, 22 Jun 2010 14:17:50 +0000]
9p: Implement LOPEN

Implement 9p2000.L version of open(LOPEN) interface in 9p client.

For LOPEN, no need to convert the flags to and from 9p mode to VFS mode.

Synopsis:

    size[4] Tlopen tag[2] fid[4] mode[4]

    size[4] Rlopen tag[2] qid[13] iounit[4]

[Fix mode bit format - jvrao@linux.vnet.ibm.com]

Signed-off-by: M. Mohan Kumar <mohan@in.ibm.com>
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbegren <ericvh@gmail.com>

10 years agofs/9p: This patch implements TLCREATE for 9p2000.L protocol.
Venkateswararao Jujjuri (JV) [Fri, 18 Jun 2010 01:27:46 +0000]
fs/9p: This patch implements TLCREATE for 9p2000.L protocol.

SYNOPSIS

    size[4] Tlcreate tag[2] fid[4] name[s] flags[4] mode[4] gid[4]

    size[4] Rlcreate tag[2] qid[13] iounit[4]

DESCRIPTION

The Tlreate request asks the file server to create a new regular file with the
name supplied, in the directory (dir) represented by fid.
The mode argument specifies the permissions to use. New file is created with
the uid if the fid and with supplied gid.

The flags argument represent Linux access mode flags with which the caller
is requesting to open the file with. Protocol allows all the Linux access
modes but it is upto the server to allow/disallow any of these acess modes.
If the server doesn't support any of the access mode, it is expected to
return error.

Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Eric Van Hensbergen <ericvh@gmail.com>